/****************************************/ /** pcbnew_config.cpp : configuration **/ /****************************************/ #include "fctsys.h" #include "appl_wxstruct.h" #include "common.h" #include "class_drawpanel.h" #include "confirm.h" #include "gestfich.h" #include "pcbnew.h" #include "wxPcbStruct.h" #include "class_board_design_settings.h" #include "pcbplot.h" #include "worksheet.h" #include "pcbnew_id.h" #include "hotkeys.h" #include "protos.h" #include "dialog_mask_clearance.h" #include "dialog_general_options.h" #include "pcbnew_config.h" #define HOTKEY_FILENAME wxT( "pcbnew" ) void WinEDA_PcbFrame::Process_Config( wxCommandEvent& event ) { int id = event.GetId(); wxPoint pos; wxFileName fn; pos = GetPosition(); pos.x += 20; pos.y += 20; switch( id ) { case ID_MENU_PCB_SHOW_HIDE_LAYERS_MANAGER_DIALOG: if( m_OptionsToolBar ) { //This command is same as the Options Vertical Toolbar // tool Show/hide layers manager bool state = m_OptionsToolBar->GetToolState( ID_TB_OPTIONS_SHOW_MANAGE_LAYERS_VERTICAL_TOOLBAR ); m_OptionsToolBar->ToggleTool( ID_TB_OPTIONS_SHOW_MANAGE_LAYERS_VERTICAL_TOOLBAR, !state ); wxCommandEvent event( wxEVT_COMMAND_TOOL_CLICKED, ID_TB_OPTIONS_SHOW_MANAGE_LAYERS_VERTICAL_TOOLBAR ); wxPostEvent( this, event ); } break; case ID_PCB_LAYERS_SETUP: DisplayDialogLayerSetup( this ); break; case ID_CONFIG_REQ: InstallConfigFrame( pos ); break; case ID_PCB_MASK_CLEARANCE: { DIALOG_PADS_MASK_CLEARANCE dlg( this ); dlg.ShowModal(); } break; case ID_OPTIONS_SETUP: { Dialog_GeneralOptions dlg( this ); dlg.ShowModal(); } break; case ID_PCB_PAD_SETUP: InstallPadOptionsFrame( NULL ); break; case ID_CONFIG_SAVE: SaveProjectSettings(); break; case ID_CONFIG_READ: { fn = GetScreen()->m_FileName; fn.SetExt( ProjectFileExtension ); wxFileDialog dlg( this, _( "Read Project File" ), fn.GetPath(), fn.GetFullName(), ProjectFileWildcard, wxFD_OPEN | wxFD_FILE_MUST_EXIST | wxFD_CHANGE_DIR ); if( dlg.ShowModal() == wxID_CANCEL ) break; if( !wxFileExists( dlg.GetPath() ) ) { wxString msg; msg.Printf( _( "File %s not found" ), GetChars( dlg.GetPath() ) ); DisplayError( this, msg ); break; } LoadProjectSettings( dlg.GetPath() ); break; } case ID_PREFERENCES_HOTKEY_CREATE_CONFIG: fn.SetPath( ReturnHotkeyConfigFilePath( g_ConfigFileLocationChoice ) ); fn.SetName( HOTKEY_FILENAME ); fn.SetExt( DEFAULT_HOTKEY_FILENAME_EXT ); WriteHotkeyConfigFile( fn.GetFullPath(), s_Pcbnew_Editor_Hokeys_Descr, true ); break; case ID_PREFERENCES_HOTKEY_READ_CONFIG: Read_Hotkey_Config( this, true ); break; case ID_PREFERENCES_HOTKEY_EDIT_CONFIG: { fn.SetPath( ReturnHotkeyConfigFilePath( g_ConfigFileLocationChoice ) ); fn.SetName( HOTKEY_FILENAME ); fn.SetExt( DEFAULT_HOTKEY_FILENAME_EXT ); wxString editorname = wxGetApp().GetEditorName(); if( !editorname.IsEmpty() ) ExecuteFile( this, editorname, QuoteFullPath( fn ) ); break; } case ID_PREFERENCES_HOTKEY_PATH_IS_HOME: case ID_PREFERENCES_HOTKEY_PATH_IS_KICAD: HandleHotkeyConfigMenuSelection( this, id ); break; case ID_PREFERENCES_HOTKEY_SHOW_CURRENT_LIST: DisplayHotkeyList( this, s_Board_Editor_Hokeys_Descr ); break; default: DisplayError( this, wxT( "WinEDA_PcbFrame::Process_Config internal error" ) ); } } /* * Read the hotkey files config for pcbnew and module_edit */ bool Read_Hotkey_Config( WinEDA_DrawFrame* frame, bool verbose ) { wxString FullFileName = ReturnHotkeyConfigFilePath( g_ConfigFileLocationChoice ); FullFileName += HOTKEY_FILENAME; FullFileName += wxT( "." ); FullFileName += DEFAULT_HOTKEY_FILENAME_EXT; return frame->ReadHotkeyConfigFile( FullFileName, s_Pcbnew_Editor_Hokeys_Descr, verbose ); } /** * Read the project configuration file settings. * * @param aProjectFileName = The project file name to load. If aProjectFileName * is not found load the default project file kicad.pro * and initialize setting to their default value. * @return Always returns true. */ bool WinEDA_PcbFrame::LoadProjectSettings( const wxString& aProjectFileName ) { wxFileName fn = aProjectFileName; if( fn.GetExt() != ProjectFileExtension ) fn.SetExt( ProjectFileExtension ); wxGetApp().RemoveLibraryPath( g_UserLibDirBuffer ); /* Initialize default values. */ g_LibName_List.Clear(); wxGetApp().ReadProjectConfig( fn.GetFullPath(), GROUP, GetProjectFileParameters(), FALSE ); /* User library path takes precedent over default library search paths. */ wxGetApp().InsertLibraryPath( g_UserLibDirBuffer, 1 ); /* Reset the items visibility flag when loading a new config * Because it could creates SERIOUS mistakes for the user, * if board items are not visible after loading a board... * Grid and ratsnest can be left to their previous state */ bool showGrid = IsElementVisible( GRID_VISIBLE ); bool showRats = IsElementVisible( RATSNEST_VISIBLE ); SetVisibleAlls(); SetElementVisibility( GRID_VISIBLE, showGrid ); SetElementVisibility( RATSNEST_VISIBLE, showRats ); return TRUE; } void WinEDA_PcbFrame::SaveProjectSettings() { wxFileName fn; fn = GetScreen()->m_FileName; fn.SetExt( ProjectFileExtension ); wxFileDialog dlg( this, _( "Save Project File" ), fn.GetPath(), fn.GetFullName(), ProjectFileWildcard, wxFD_SAVE | wxFD_CHANGE_DIR ); if( dlg.ShowModal() == wxID_CANCEL ) return; wxGetApp().WriteProjectConfig( dlg.GetPath(), GROUP, GetProjectFileParameters() ); } /** * Return project file parameter list for PCBNew. * * Populate the project file parameter array specific to PCBNew if it hasn't * already been populated and return a reference to the array to the caller. * Creating the parameter list at run time has the advantage of being able * to define local variables. The old method of statically building the array * at compile time requiring global variable definitions by design. */ PARAM_CFG_ARRAY& WinEDA_PcbFrame::GetProjectFileParameters() { if( !m_projectFileParams.empty() ) return m_projectFileParams; m_projectFileParams.push_back( new PARAM_CFG_WXSTRING( wxT( "LibDir" ),&g_UserLibDirBuffer, GROUPLIB ) ); m_projectFileParams.push_back( new PARAM_CFG_LIBNAME_LIST( wxT( "LibName" ), &g_LibName_List, GROUPLIB ) ); m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "PadDrlX" ), &g_Pad_Master.m_Drill.x, 320, 0, 0x7FFF ) ); m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "PadDimH" ), &g_Pad_Master.m_Size.x, 550, 0, 0x7FFF ) ); m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "PadDimV" ), &g_Pad_Master.m_Size.y, 550, 0, 0x7FFF ) ); m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "BoardThickness" ), &boardDesignSettings.m_BoardThickness, 630, 0, 0xFFFF ) ); m_projectFileParams.push_back( new PARAM_CFG_BOOL( wxT( "SgPcb45" ), &Segments_45_Only, TRUE ) ); m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtPcbV" ), &boardDesignSettings.m_PcbTextSize.y, 600, TEXTS_MIN_SIZE, TEXTS_MAX_SIZE ) ); m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtPcbH" ), &boardDesignSettings.m_PcbTextSize.x, 600, TEXTS_MIN_SIZE, TEXTS_MAX_SIZE ) ); m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtModV" ), &ModuleTextSize.y, 500, TEXTS_MIN_SIZE, TEXTS_MAX_SIZE ) ); m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtModH" ), &ModuleTextSize.x, 500, TEXTS_MIN_SIZE, TEXTS_MAX_SIZE ) ); m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtModW" ), &ModuleTextWidth, 100, 1, TEXTS_MAX_WIDTH ) ); m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "VEgarde" ), &boardDesignSettings.m_SolderMaskMargin, 100, 0, 10000 ) ); m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "DrawLar" ), &boardDesignSettings.m_DrawSegmentWidth, 120, 0, 0xFFFF ) ); m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "EdgeLar" ), &boardDesignSettings.m_EdgeSegmentWidth, 120, 0, 0xFFFF ) ); m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtLar" ), &boardDesignSettings.m_PcbTextWidth, 120, 0, 0xFFFF ) ); m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "MSegLar" ), &ModuleSegmentWidth, 120, 0, 0xFFFF ) ); m_projectFileParams.push_back( new PARAM_CFG_WXSTRING( wxT( "LastNetListRead" ), &m_lastNetListRead ) ); return m_projectFileParams; } /* * Return the PCBNew applications settings list. * * This replaces the old statically define list that had the project * file settings and the application settings mixed together. This * was confusing and caused some settings to get saved and loaded * incorrectly. Currently, only the settings that are needed at start * up by the main window are defined here. There are other locally used * settings are scattered throughout the PCBNew source code. If you need * to define a configuration setting that need to be loaded at run time, * this is the place to define it. * * @todo: Define the configuration variables as member variables instead of * global variables or move them to the object class where they are * used. */ PARAM_CFG_ARRAY& WinEDA_PcbFrame::GetConfigurationSettings() { if( !m_configSettings.empty() ) return m_configSettings; m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ViaSHole" ), &DisplayOpt.m_DisplayViaMode, VIA_SPECIAL_HOLE_SHOW, VIA_HOLE_NOT_SHOW, OPT_VIA_HOLE_END - 1 ) ); m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ShowNetNamesMode" ), &DisplayOpt.DisplayNetNamesMode, 3, 0, 3 ) ); m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "Unite" ), &g_UnitMetric, FALSE ) ); m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "SegFill" ), &DisplayOpt.DisplayPcbTrackFill, TRUE ) ); m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "TrackDisplayClearance" ), &DisplayOpt.ShowTrackClearanceMode, SHOW_CLEARANCE_NEW_TRACKS_AND_VIA_AREAS ) ); m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadFill" ), &DisplayOpt.DisplayPadFill, TRUE ) ); m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "ViaFill" ), &DisplayOpt.DisplayViaFill, TRUE ) ); m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadAffG" ), &DisplayOpt.DisplayPadIsol, TRUE ) ); m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadSNum" ), &DisplayOpt.DisplayPadNum, TRUE ) ); m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ModAffC" ), &DisplayOpt.DisplayModEdge, FILLED, 0, 2 ) ); m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ModAffT" ), &DisplayOpt.DisplayModText, FILLED, 0, 2 ) ); m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "PcbAffT" ), &DisplayOpt.DisplayDrawItems, FILLED, 0, 2 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay0" ), LOC_COLOR( 0 ), GREEN ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay1" ), LOC_COLOR( 1 ), BLUE ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay2" ), LOC_COLOR( 2 ), LIGHTGRAY ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay3" ), LOC_COLOR( 3 ), 5 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay4" ), LOC_COLOR( 4 ), 4 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay5" ), LOC_COLOR( 5 ), 5 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay6" ), LOC_COLOR( 6 ), 6 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay7" ), LOC_COLOR( 7 ), 5 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay8" ), LOC_COLOR( 8 ), 7 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay9" ), LOC_COLOR( 9 ), 1 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayA" ), LOC_COLOR( 10 ), 2 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayB" ), LOC_COLOR( 11 ), 3 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayC" ), LOC_COLOR( 12 ), 12 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayD" ), LOC_COLOR( 13 ), 13 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayE" ), LOC_COLOR( 14 ), 14 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayF" ), LOC_COLOR( 15 ), RED ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayG" ), LOC_COLOR( 16 ), 1 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayH" ), LOC_COLOR( 17 ), 5 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayI" ), LOC_COLOR( 18 ), 11 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayJ" ), LOC_COLOR( 19 ), 4 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayK" ), LOC_COLOR( 20 ), 5 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayL" ), LOC_COLOR( 21 ), 3 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayM" ), LOC_COLOR( 22 ), 6 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayN" ), LOC_COLOR( 23 ), 5 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayO" ), LOC_COLOR( 24 ), LIGHTGRAY ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayP" ), LOC_COLOR( 25 ), 1 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayQ" ), LOC_COLOR( 26 ), 2 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayR" ), LOC_COLOR( 27 ), 14 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayS" ), LOC_COLOR( 28 ), YELLOW ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayT" ), LOC_COLOR( 29 ), 13 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayU" ), LOC_COLOR( 30 ), 14 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayV" ), LOC_COLOR( 31 ), 7 ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CTxtMoC" ), ITEM_COLOR( MOD_TEXT_FR_VISIBLE ), LIGHTGRAY ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CTxtMoS" ), ITEM_COLOR( MOD_TEXT_BK_VISIBLE ), BLUE ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CTxtVis" ), ITEM_COLOR( MOD_TEXT_INVISIBLE ), DARKGRAY ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CAncreM" ), ITEM_COLOR( ANCHOR_VISIBLE ), BLUE ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoPadCu" ), ITEM_COLOR( PAD_BK_VISIBLE ), GREEN ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoPadCm" ), ITEM_COLOR( PAD_FR_VISIBLE ), RED ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoViaTh" ), ITEM_COLOR( VIA_THROUGH_VISIBLE ), LIGHTGRAY ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoViaBu" ), ITEM_COLOR( VIA_BBLIND_VISIBLE ), BROWN ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoViaMi" ), ITEM_COLOR( VIA_MICROVIA_VISIBLE ), CYAN ) ); m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoRatsN" ), ITEM_COLOR( RATSNEST_VISIBLE ), WHITE ) ); m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "HPGLnum" ), &g_pcb_plot_options.HPGL_Pen_Num, 1, 1, 16 ) ); m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "HPGdiam" ), &g_pcb_plot_options.HPGL_Pen_Diam, 15, 0, 100 ) ); m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "HPGLSpd" ), &g_pcb_plot_options.HPGL_Pen_Speed, 20, 0, 1000 ) ); m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "HPGLrec" ), &g_pcb_plot_options.HPGL_Pen_Recouvrement, 2, 0, 0x100 ) ); m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "TimeOut" ), &g_TimeOut, 600, 0, 60000 ) ); m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "DPolair" ), &DisplayOpt.DisplayPolarCood, FALSE ) ); m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "MaxLnkS" ), &g_MaxLinksShowed, 3, 0, 15 ) ); m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "ShowMRa" ), &g_Show_Module_Ratsnest, TRUE ) ); m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "TwoSegT" ), &g_TwoSegmentTrackBuild, TRUE ) ); return m_configSettings; }