# 킴슨김랑기 <korearf@gmail.com>, 2021, 2022, 2023, 2024.
# Ji Yoon Choi <chichoon.choi@gmail.com>, 2021.
# jeongsuAn <dks9467@gmail.com>, 2021, 2022.
# 이상수 <kku1818@gmail.com>, 2021, 2022.
# jehunseo <benbot591@gmail.com>, 2021.
# Uibeom Jung <wjddmlqja17@gmail.com>, 2021.
# 박준언 <joonun1696@pusan.ac.kr>, 2021.
# 방준영 <wnsdudtkwkd8@naver.com>, 2021.
# 박기정 <pgj0334@naver.com>, 2021.
# hokim <teamgoodaloe@gmail.com>, 2021.
# 강명구 <mg_@kakao.com>, 2021.
# 서범기 <joonhoflow@naver.com>, 2021.
# 박세훈 <helloworld4327@gmail.com>, 2022.
# gurqja3810 <gurqja3810@naver.com>, 2022.
# YunJiSang <js_7744@naver.com>, 2022.
# 이기형 <oddlight0@gmail.com>, 2022.
# kmn4555 <kmn4555@naver.com>, 2022.
# ky107601 <qldkr1@naver.com>, 2022.
# 김용재 <tpdlqj965@gmail.com>, 2022.
# 김낙환 <ktkr1964@naver.com>, 2022.
# minsu kim (0xGabriel) <rlaalstn9601@gmail.com>, 2022.
# 김세영 <tpdud2980@naver.com>, 2022.
# 남우근 <rolru7686@gmail.com>, 2022.
# 이윤성 <yunslee@student.42seoul.kr>, 2022.
# KwonHyeokbeom <gurqja3810@naver.com>, 2022.
# "minsu kim (0xGabriel)" <rlaalstn9601@gmail.com>, 2023.
# pedrolinharesmoreira <pedrolinhares@unifei.edu.br>, 2023, 2024.
msgid ""
msgstr ""
"Project-Id-Version: kicad\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-02-19 11:26-0800\n"
"PO-Revision-Date: 2024-02-14 18:22+0000\n"
"Last-Translator: 김랑기 <korearf@gmail.com>\n"
"Language-Team: Korean <https://hosted.weblate.org/projects/kicad/master-"
"source/ko/>\n"
"Language: ko\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Weblate 5.4-dev\n"
"X-Poedit-Country: KOREA, REPUBLIC OF\n"
"X-Poedit-Basepath: f:\\kicad-dev\n"
"X-Poedit-KeywordsList: _\n"
"X-Poedit-Language: Korean\n"
"X-Poedit-SearchPath-0: pcbnew\n"
"X-Poedit-SearchPath-1: eeschema\n"
"X-Poedit-SearchPath-2: cvpcb\n"
"X-Poedit-SearchPath-3: kicad\n"
"X-Poedit-SearchPath-4: gerbview\n"
"X-Poedit-SearchPath-5: common\n"
"X-Poedit-SearchPath-6: 3d-viewer\n"
"X-Poedit-SearchPath-7: share\n"

#: 3d-viewer/3d_cache/3d_plugin_manager.cpp:58
msgid "All Files"
msgstr "모든 파일"

#: 3d-viewer/3d_canvas/board_adapter.cpp:330
msgid "Build board outline"
msgstr "기판 외곽선 생성"

#: 3d-viewer/3d_canvas/board_adapter.cpp:537
msgid "Create layers"
msgstr "레이어 생성"

#: 3d-viewer/3d_canvas/board_adapter.cpp:877
#: pcbnew/dialogs/dialog_footprint_checker.cpp:116
msgid "No footprint loaded."
msgstr "불러온 풋프린트가 없음."

#: 3d-viewer/3d_canvas/board_adapter.cpp:894
msgid ""
"Footprint outline is missing or malformed. Run Footprint Checker for a full "
"analysis."
msgstr ""
"풋프린트 외곽선이 없거나 잘못되었습니다. 전체 분석을 위해 풋프린트 검사기를 "
"실행합니다."

#: 3d-viewer/3d_canvas/board_adapter.cpp:903
msgid "Board outline is missing or malformed. Run DRC for a full analysis."
msgstr ""
"기판 외곽선이 없거나 잘못되었습니다. 전체 분석을 위해 DRC를 실행합니다."

#: 3d-viewer/3d_canvas/create_layer_items.cpp:260
msgid "Create tracks and vias"
msgstr "배선 및 비아 생성"

#: 3d-viewer/3d_canvas/create_layer_items.cpp:701
msgid "Create zones"
msgstr "영역 만들기"

#: 3d-viewer/3d_canvas/create_layer_items.cpp:785
msgid "Build Tech layers"
msgstr "기술 레이어 생성"

#: 3d-viewer/3d_canvas/create_layer_items.cpp:817
#, c-format
msgid "Build Tech layer %d"
msgstr "기술 레이어 생성 %d"

#: 3d-viewer/3d_canvas/create_layer_items.cpp:1033
msgid "Simplifying copper layer polygons"
msgstr "동박층 다각형 단순화"

#: 3d-viewer/3d_canvas/create_layer_items.cpp:1038
msgid "Calculating plated copper"
msgstr "동도금 계산"

#: 3d-viewer/3d_canvas/create_layer_items.cpp:1112
#, c-format
msgid "Simplifying %d copper layers"
msgstr "%d 동박층 단순화"

#: 3d-viewer/3d_canvas/create_layer_items.cpp:1154
msgid "Simplify holes contours"
msgstr "홀 윤곽 단순화"

#: 3d-viewer/3d_canvas/create_layer_items.cpp:1174
msgid "Build BVH for holes and vias"
msgstr "홀과 비아용 BVH 생성"

#: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:385
msgid "OpenGL context creation error"
msgstr "OpenGL context 생성 에러"

#: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:416
msgid "Your OpenGL version is not supported. Minimum required is 1.5."
msgstr "OpenGL 버전이 지원되지 않습니다. 최소 요구 사항은 1.5입니다."

#: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:550
#, c-format
msgid "Last render time %.0f ms"
msgstr "마지막 렌더링 시간 %.0f ms"

#: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:657
#, c-format
msgid "Net %s\tNet class %s"
msgstr "네트 %s\t네트클래스 %s"

#: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:681
#, c-format
msgid "Pad %s\t"
msgstr "패드 %s\t"

#: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:712
#, c-format
msgid "Rule area %s\t"
msgstr "%s의 규칙 영역\t"

#: 3d-viewer/3d_canvas/eda_3d_canvas.cpp:714
#, c-format
msgid "Zone %s\t"
msgstr "영역 %s\t"

#: 3d-viewer/3d_rendering/opengl/create_scene.cpp:465
msgid "Load OpenGL: board"
msgstr "OpenGL 불러오기: 기판"

#: 3d-viewer/3d_rendering/opengl/create_scene.cpp:493
msgid "Load OpenGL: holes and vias"
msgstr "OpenGL 불러오기: 홀 및 비아"

#: 3d-viewer/3d_rendering/opengl/create_scene.cpp:547
msgid "Load OpenGL: layers"
msgstr "OpenGL 불러오기: 레이어"

#: 3d-viewer/3d_rendering/opengl/create_scene.cpp:561
#, c-format
msgid "Load OpenGL layer %s"
msgstr "OpenGL 레이어 %s 불러오기"

#: 3d-viewer/3d_rendering/opengl/create_scene.cpp:659
#: 3d-viewer/3d_rendering/raytracing/create_scene.cpp:779
#: pcbnew/pcb_io/altium/altium_pcb.cpp:1595
msgid "Loading 3D models..."
msgstr "3D 모델을 불러오는 중입니다..."

#: 3d-viewer/3d_rendering/opengl/create_scene.cpp:668
#: 3d-viewer/3d_rendering/raytracing/create_scene.cpp:960
#, c-format
msgid "Reload time %.3f s"
msgstr "다시 불러오기 시간 %.3f s"

#: 3d-viewer/3d_rendering/opengl/create_scene.cpp:961
#: eeschema/sch_io/eagle/sch_io_eagle.cpp:416
#: eeschema/sch_io/eagle/sch_io_eagle.cpp:597
#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy.cpp:285
#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr.cpp:305
#: eeschema/symbol_library.cpp:533 pcbnew/pcb_io/eagle/pcb_io_eagle.cpp:344
#: pcbnew/pcb_io/easyeda/pcb_io_easyeda_plugin.cpp:149
#: pcbnew/pcb_io/easyedapro/pcb_io_easyedapro.cpp:113
#: pcbnew/pcb_io/fabmaster/pcb_io_fabmaster.cpp:59
#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:502
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:2431
#, c-format
msgid "Loading %s..."
msgstr "%s을(를) 불러오는 중입니다..."

#: 3d-viewer/3d_rendering/opengl/render_3d_opengl.cpp:464
#: 3d-viewer/3d_rendering/raytracing/render_3d_raytrace.cpp:174
msgid "Loading..."
msgstr "불러오는 중..."

#: 3d-viewer/3d_rendering/raytracing/create_scene.cpp:387
msgid "Load Raytracing: board"
msgstr "레이트레이싱 불러오기: 기판"

#: 3d-viewer/3d_rendering/raytracing/create_scene.cpp:560
msgid "Load Raytracing: layers"
msgstr "레이트레이싱 불러오기: 레이어"

#: 3d-viewer/3d_rendering/raytracing/render_3d_raytrace.cpp:339
#, c-format
msgid "Rendering time %.3f s"
msgstr "렌더링 시간 %.3f s"

#: 3d-viewer/3d_rendering/raytracing/render_3d_raytrace.cpp:393
#, c-format
msgid "Rendering: %.0f %%"
msgstr "렌더링: %.0f %%"

#: 3d-viewer/3d_rendering/raytracing/render_3d_raytrace.cpp:841
msgid "Rendering: Post processing shader"
msgstr "렌더링: 후 처리 셰이더"

#: 3d-viewer/3d_viewer/3d_menubar.cpp:51
msgid "Export Current View as PNG..."
msgstr "현재 화면을 PNG로 내보내기..."

#: 3d-viewer/3d_viewer/3d_menubar.cpp:56
msgid "Export Current View as JPEG..."
msgstr "현재 화면을 JPEG로 내보내기 ..."

#: 3d-viewer/3d_viewer/3d_menubar.cpp:62
#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:661
#: common/eda_base_frame.cpp:1181 common/hotkey_store.cpp:76
#: common/tool/actions.cpp:865 pcbnew/footprint_viewer_frame.cpp:971
#: pcbnew/pcb_base_frame.cpp:667
msgid "3D Viewer"
msgstr "3D 뷰어"

#: 3d-viewer/3d_viewer/3d_menubar.cpp:70
msgid "Copy 3D Image"
msgstr "3D 이미지 복사"

#: 3d-viewer/3d_viewer/3d_menubar.cpp:87
msgid "3D Grid"
msgstr "3D 그리드"

#: 3d-viewer/3d_viewer/3d_menubar.cpp:125
msgid "Raytracing"
msgstr "레이트레이싱"

#: 3d-viewer/3d_viewer/3d_menubar.cpp:132
msgid "Reset to Default Settings"
msgstr "기본 설정으로 재설정"

#: 3d-viewer/3d_viewer/3d_menubar.cpp:139
#: bitmap2component/bitmap2cmp_frame.cpp:307 cvpcb/menubar.cpp:78
#: eeschema/menubar.cpp:338 eeschema/sim/toolbars_simulator_frame.cpp:160
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:169
#: eeschema/toolbars_symbol_viewer.cpp:129 gerbview/menubar.cpp:231
#: kicad/menubar.cpp:216 pagelayout_editor/menubar.cpp:150
#: pcb_calculator/pcb_calculator_frame.cpp:228
#: pcbnew/menubar_footprint_editor.cpp:233 pcbnew/menubar_pcb_editor.cpp:458
#: pcbnew/toolbars_footprint_viewer.cpp:193
msgid "&File"
msgstr "파일 (&F)"

#: 3d-viewer/3d_viewer/3d_menubar.cpp:140 cvpcb/menubar.cpp:79
#: eeschema/menubar.cpp:339
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:170 kicad/menubar.cpp:217
#: pagelayout_editor/menubar.cpp:151 pcbnew/menubar_footprint_editor.cpp:234
#: pcbnew/menubar_pcb_editor.cpp:459
msgid "&Edit"
msgstr "편집 (&E)"

#: 3d-viewer/3d_viewer/3d_menubar.cpp:141 eeschema/menubar.cpp:340
#: eeschema/sim/toolbars_simulator_frame.cpp:161
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:171
#: eeschema/toolbars_symbol_viewer.cpp:130 gerbview/menubar.cpp:232
#: kicad/menubar.cpp:218 pagelayout_editor/menubar.cpp:152
#: pcbnew/menubar_footprint_editor.cpp:235 pcbnew/menubar_pcb_editor.cpp:460
#: pcbnew/toolbars_footprint_viewer.cpp:194
msgid "&View"
msgstr "보기 (&V)"

#: 3d-viewer/3d_viewer/3d_menubar.cpp:142
#: bitmap2component/bitmap2cmp_frame.cpp:308 cvpcb/menubar.cpp:80
#: eeschema/sim/toolbars_simulator_frame.cpp:163 gerbview/menubar.cpp:234
#: kicad/menubar.cpp:220 pcb_calculator/pcb_calculator_frame.cpp:229
msgid "&Preferences"
msgstr "설정 (&P)"

#: 3d-viewer/3d_viewer/3d_toolbar.cpp:57
msgid "Reload board"
msgstr "기판 다시 불러오기"

#: 3d-viewer/3d_viewer/3d_toolbar.cpp:62
msgid "Copy 3D image to clipboard"
msgstr "클립보드에 3D 이미지 복사"

#: 3d-viewer/3d_viewer/3d_toolbar.cpp:67
msgid "Render current view using Raytracing"
msgstr "레이트레이싱으로 현재 뷰 렌더링"

#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:102
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:73
msgid "KiCad 3D Viewer"
msgstr "KiCad 3D 뷰어"

#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:164
#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:667
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:27
#: pcbnew/footprint_edit_frame.cpp:241 pcbnew/footprint_edit_frame.cpp:908
#: pcbnew/pcb_edit_frame.cpp:302 pcbnew/pcb_edit_frame.cpp:1577
msgid "Appearance"
msgstr "형상"

#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:328
#: 3d-viewer/dialogs/appearance_controls_3D.cpp:544
#: 3d-viewer/dialogs/appearance_controls_3D_base.cpp:40
msgid "Follow PCB Editor"
msgstr "PCB 편집기 따르기"

#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:330
#: 3d-viewer/dialogs/appearance_controls_3D.cpp:545
#: 3d-viewer/dialogs/appearance_controls_3D_base.cpp:40
msgid "Follow PCB Plot Settings"
msgstr "PCB 플롯 설정 따르기"

#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:588
msgid "legacy colors"
msgstr "기존 색상"

#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:727
msgid "3D Image File Name"
msgstr "3D 이미지 파일 이름"

#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:748
#: common/eda_base_frame.cpp:1322 common/eda_base_frame.cpp:1326
#: pcbnew/pcb_io/altium/altium_pcb.cpp:1664
#, c-format
msgid "Insufficient permissions to save file '%s'."
msgstr "파일 '%s'을(를) 저장할 수 있는 권한이 없습니다."

#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:749 common/confirm.cpp:131
#: common/confirm.cpp:321 common/dialogs/dialog_grid_settings.cpp:61
#: common/dialogs/dialog_grid_settings.cpp:68
#: common/dialogs/panel_setup_severities.cpp:43
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1625
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:2026
#: eeschema/files-io.cpp:974 eeschema/files-io.cpp:1042
#: kicad/import_proj.cpp:79 kicad/import_project.cpp:122 kicad/kicad.cpp:322
#: kicad/tools/kicad_manager_control.cpp:242
#: kicad/tools/kicad_manager_control.cpp:299
#: kicad/tools/kicad_manager_control.cpp:345
#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664.cpp:143
#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664.cpp:216
#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664.cpp:225
#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664.cpp:234
#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664.cpp:240
#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664.cpp:241
#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664.cpp:242
#: pcb_calculator/calculator_panels/panel_fusing_current.cpp:166
#: pcb_calculator/calculator_panels/panel_fusing_current.cpp:179
#: pcb_calculator/calculator_panels/panel_fusing_current.cpp:191
#: pcb_calculator/calculator_panels/panel_fusing_current.cpp:203
#: pcbnew/pcb_marker.cpp:206 pcbnew/widgets/appearance_controls.cpp:2666
msgid "Error"
msgstr "오류"

#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:789
msgid "Failed to copy image to clipboard"
msgstr "이미지를 클립보드에 복사하지 못함"

#: 3d-viewer/3d_viewer/eda_3d_viewer_frame.cpp:800
msgid "Can't save file"
msgstr "파일을 저장할 수 없음"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:47
msgid "Set Pivot"
msgstr "피벗 설정"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:48
msgid "Place point around which the board will be rotated (middle mouse click)"
msgstr "보드를 회전시킬 지점 배치(중간 마우스 클릭)"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:55
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:56
msgid "Rotate X Clockwise"
msgstr "시계 방향 X 회전"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:64
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:65
msgid "Rotate X Counterclockwise"
msgstr "반시계 방향 X 회전"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:73
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:74
msgid "Rotate Y Clockwise"
msgstr "시계 방향 Y 회전"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:82
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:83
msgid "Rotate Y Counterclockwise"
msgstr "반시계 방향 Y 회전"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:91
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:92
msgid "Rotate Z Clockwise"
msgstr "시계 방향 Z 회전"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:100
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:101
msgid "Rotate Z Counterclockwise"
msgstr "반시계 방향 Z 회전"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:110
msgid "Move Board Left"
msgstr "기판을 왼쪽으로 이동"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:111
msgid "Move board Left"
msgstr "기판을 왼쪽으로 이동"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:120
msgid "Move Board Right"
msgstr "기판을 오른쪽으로 이동"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:121
msgid "Move board Right"
msgstr "기판을 오른쪽으로 이동"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:130
msgid "Move Board Up"
msgstr "기판을 위로 이동"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:131
msgid "Move board Up"
msgstr "기판을 위로 이동"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:140
msgid "Move Board Down"
msgstr "기판을 아래로 이동"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:141
msgid "Move board Down"
msgstr "기판을 아래로 이동"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:150
msgid "Home View"
msgstr "홈 화면"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:151
msgid "Home view"
msgstr "홈 뷰"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:159
msgid "Flip Board"
msgstr "플립 보드"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:160
msgid "Flip the board view"
msgstr "보드 보기 뒤집기"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:168
msgid "Toggle Orthographic Projection"
msgstr "직교 투영 전환"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:169
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:197
msgid "Enable/disable orthographic projection"
msgstr "직교 투영 활성화 / 비활성화"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:176
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:177
msgid "View Front"
msgstr "전면 보기"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:186
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:187
msgid "View Back"
msgstr "후면 보기"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:196
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:197
msgid "View Left"
msgstr "왼쪽 보기"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:206
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:207
msgid "View Right"
msgstr "오른쪽 보기"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:216
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:217
msgid "View Top"
msgstr "상단 보기"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:226
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:227
msgid "View Bottom"
msgstr "하단 보기"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:235
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:236
msgid "No 3D Grid"
msgstr "3D 그리드 없음"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:243
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:244
msgid "3D Grid 10mm"
msgstr "3D 그리드 10mm"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:251
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:252
msgid "3D Grid 5mm"
msgstr "3D 그리드 5mm"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:259
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:260
msgid "3D Grid 2.5mm"
msgstr "3D 그리드 2.5mm"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:267
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:268
msgid "3D Grid 1mm"
msgstr "3D 그리드 1mm"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:275
msgid "Render Realistic Materials"
msgstr "사실적인 재료 렌더링"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:276
msgid "Use all material properties from each 3D model file"
msgstr "각 3D 모델 파일의 모든 재료 속성 사용"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:283
msgid "Render Solid Colors"
msgstr "단색 렌더링"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:284
msgid "Use only the diffuse color property from 3D model file"
msgstr "3D 모델 파일에서 확산 색상 속성만 사용"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:291
msgid "Render CAD Colors"
msgstr "CAD 색상 렌더링"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:292
msgid "Use a CAD color style based on the diffuse color of the material"
msgstr "재료의 확산 색상을 기준으로 CAD 색상 스타일 사용"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:300
msgid "Show Through Hole 3D Models"
msgstr "스루홀 3D 모델 표시"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:301
msgid "Show 3D models for 'Through hole' type footprints"
msgstr "'스루 홀' 유형의 풋프린트에 대한 3D 모델 표시"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:309
msgid "Show SMD 3D Models"
msgstr "SMD 3D 모델 표시"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:310
msgid "Show 3D models for 'Surface mount' type footprints"
msgstr "'표면 실장' 유형의 풋프린트에 대한 3D 모델 표시"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:318
msgid "Show Unspecified 3D Models"
msgstr "지정되지 않은 3D 모델 표시"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:319
msgid "Show 3D models for 'unspecified' type footprints"
msgstr "'지정되지 않은' 유형의 풋프린트에 대한 3D 모델 표시"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:327
msgid "Show 3D Models not in POS File"
msgstr "POS 파일에 없는 3D 모델 표시"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:328
msgid "Show 3D models even if not found in .pos file"
msgstr ".pos 파일에 없는 경우에도 3D 모델 표시"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:336
msgid "Show 3D Models marked DNP"
msgstr "DNP로 표시된 3D 모델 표시"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:337
msgid "Show 3D models even if marked 'Do Not Place'"
msgstr "'배치 금지'로 표시된 경우에도 3D 모델 표시"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:344
msgid "Show Model Bounding Boxes"
msgstr "모델 경계 상자 표시"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:345
msgid "Show 3D model bounding boxes in realtime renderer"
msgstr "실시간 렌더러에 3D 모델 경계 상자 표시"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:352
#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:353
msgid "Show 3D Axis"
msgstr "3D 축 표시"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:360
#: pcbnew/tools/pcb_actions.cpp:1341
msgid "Show Appearance Manager"
msgstr "형상 관리자 표시"

#: 3d-viewer/3d_viewer/tools/eda_3d_actions.cpp:361
#: pcbnew/tools/pcb_actions.cpp:1342
msgid "Show/hide the appearance manager"
msgstr "형상 관리자 표시/숨기기"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:54
msgid "Board Body"
msgstr "보드 본체"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:54
msgid "Show board body"
msgstr "보드 본체 표시"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:55
msgid "F.Cu"
msgstr "F.Cu"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:55
msgid "Show front copper / surface finish color"
msgstr "전면 구리 보기 / 표면 마감 색상"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:56
msgid "B.Cu"
msgstr "B.Cu"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:56
msgid "Show back copper / surface finish color"
msgstr "후면 구리 보기 / 표면 마감 색상"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:57
msgid "Adhesive"
msgstr "접착면"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:57
msgid "Show adhesive"
msgstr "접착면 보기"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:58
msgid "Solder Paste"
msgstr "솔더 페이스트"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:58
msgid "Show solder paste"
msgstr "솔더 페이스트 보기"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:59
msgid "F.Silkscreen"
msgstr "F.Silkscreen"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:59
msgid "Show front silkscreen"
msgstr "전면 실크스크린 보기"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:60
msgid "B.Silkscreen"
msgstr "B.Silkscreen"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:60
msgid "Show back silkscreen"
msgstr "후면 실크스크린 보기"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:61
msgid "F.Mask"
msgstr "F.Mask"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:61
msgid "Show front solder mask"
msgstr "전면 솔더 마스크 보기"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:62
msgid "B.Mask"
msgstr "B.Mask"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:62
msgid "Show back solder mask"
msgstr "후면 솔더 마스크 보기"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:63
msgid "User.Drawings"
msgstr "사용자.도면"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:63
msgid "Show user drawings layer"
msgstr "사용자 도면 레이어 보기"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:64
msgid "User.Comments"
msgstr "User.Comments"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:64
msgid "Show user comments layer"
msgstr "사용자 설명 레이어 보기"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:65
msgid "User.Eco1"
msgstr "User.Eco1"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:65
msgid "Show user ECO1 layer"
msgstr "사용자 ECO1 레이어 보기"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:66
msgid "User.Eco2"
msgstr "User.Eco2"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:66
msgid "Show user ECO2 layer"
msgstr "사용자 ECO2 레이어 보기"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:68
msgid "Through-hole Models"
msgstr "관통형 모델"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:69
msgid "SMD Models"
msgstr "SMD 모델"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:70
msgid "Virtual Models"
msgstr "가상 모델"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:71
msgid "Models not in POS File"
msgstr "POS 파일에 없는 모델"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:72
msgid "Models marked DNP"
msgstr "DNP가 표시된 모델"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:73
msgid "Model Bounding Boxes"
msgstr "모델 경계 상자"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:75 common/layer_id.cpp:161
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:30
#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:64
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:111
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:31
#: pcbnew/widgets/appearance_controls.cpp:336
msgid "Values"
msgstr "값"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:75
#: pcbnew/widgets/appearance_controls.cpp:336
msgid "Show footprint values"
msgstr "풋프린트 값 표시"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:76
#: pcbnew/widgets/appearance_controls.cpp:337
msgid "References"
msgstr "참조"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:76
#: pcbnew/widgets/appearance_controls.cpp:337
msgid "Show footprint references"
msgstr "풋프린트 참조 표시"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:77
#: pcbnew/widgets/appearance_controls.cpp:338
msgid "Footprint Text"
msgstr "풋프린트 텍스트"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:77
#: pcbnew/widgets/appearance_controls.cpp:338
msgid "Show all footprint text"
msgstr "모든 풋프린트 텍스트 표시"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:78
msgid "Off-board Silkscreen"
msgstr "Off-기판 실크스크린"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:78
msgid "Do not clip silk layers to board outline"
msgstr "보드 외곽선에 맞게 실크 레이어를 자르지 마십시오"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:80
msgid "3D Axis"
msgstr "3D 축"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:81
msgid "Background Start"
msgstr "배경 시작"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:81
msgid "Background gradient start color"
msgstr "배경 그라데이션 시작 색상"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:82
msgid "Background End"
msgstr "배경 종료"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:82
msgid "Background gradient end color"
msgstr "배경 그라데이션 끝 색상"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:115
#, c-format
msgid ""
"Save and restore color and visibility combinations.\n"
"Use %s+Tab to activate selector.\n"
"Successive Tabs while holding %s down will cycle through presets in the "
"popup."
msgstr ""
"색상 및 가시성 조합을 저장하고 복원합니다.\n"
"%s+Tab을 사용하여 선택기를 활성화합니다.\n"
"%s를 누른 상태에서 연속 탭을 누르면 팝업의 사전 설정이 순환됩니다."

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:123
#, c-format
msgid ""
"Save and restore camera position and zoom.\n"
"Use %s+Tab to activate selector.\n"
"Successive Tabs while holding %s down will cycle through viewports in the "
"popup."
msgstr ""
"카메라 위치와 줌을 저장하고 복원합니다.\n"
"%s+Tab을 사용하여 선택기를 활성화합니다.\n"
"%s를 누른 상태에서 연속 탭하면 팝업의 뷰포트가 순환합니다."

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:438
msgid "Left double click or middle click to change color"
msgstr "왼쪽 더블 클릭 또는 중간 버튼 클릭을 통해 색상 변경"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:485
#: pcbnew/widgets/appearance_controls.cpp:2169
#, c-format
msgid "Show or hide %s"
msgstr "%s 표시 또는 숨기기"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:537
#: pcbnew/widgets/appearance_controls.cpp:2512
#, c-format
msgid "Presets (%s+Tab):"
msgstr "사전 설정(%s+탭):"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:551
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1469
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1890
#: pcbnew/widgets/appearance_controls.cpp:2534
msgid "Save preset..."
msgstr "사전 설정 저장..."

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:552
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1470
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1891
#: pcbnew/widgets/appearance_controls.cpp:2535
msgid "Delete preset..."
msgstr "사전 설정 삭제..."

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:648
#: pcbnew/widgets/appearance_controls.cpp:2638
msgid "Layer preset name:"
msgstr "레이어 사전 설정 이름:"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:649
#: pcbnew/widgets/appearance_controls.cpp:2639
msgid "Save Layer Preset"
msgstr "레이어 사전 설정을 저장"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:664
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1632
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:2033
#: pcbnew/widgets/appearance_controls.cpp:2673
msgid "Overwrite existing preset?"
msgstr "기존 사전 설정에 덮어쓸까요?"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:690
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1657
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:2058
#: pcbnew/widgets/appearance_controls.cpp:2699
msgid "Presets"
msgstr "프리셋"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:699
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1669
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:2070
#: pcbnew/widgets/appearance_controls.cpp:2711
msgid "Delete Preset"
msgstr "사전 설정 삭제"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:700
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1670
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:2071
#: pcbnew/widgets/appearance_controls.cpp:2712
msgid "Select preset:"
msgstr "프리셋 선택:"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:755
#: pcbnew/widgets/appearance_controls.cpp:2808
#, c-format
msgid "Viewports (%s+Tab):"
msgstr "뷰포트(%s+Tab):"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:764
#: pcbnew/widgets/appearance_controls.cpp:2817
msgid "Save viewport..."
msgstr "뷰포트 저장..."

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:765
#: pcbnew/widgets/appearance_controls.cpp:2818
msgid "Delete viewport..."
msgstr "뷰포트 삭제..."

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:796
#: pcbnew/widgets/appearance_controls.cpp:2867
msgid "Viewport name:"
msgstr "뷰포트 이름:"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:797
#: pcbnew/widgets/appearance_controls.cpp:2867
msgid "Save Viewport"
msgstr "뷰포트 저장"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:836
#: pcbnew/widgets/appearance_controls.cpp:2906
msgid "Viewports"
msgstr "뷰포트"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:845
#: pcbnew/widgets/appearance_controls.cpp:2915
msgid "Delete Viewport"
msgstr "뷰포트 삭제"

#: 3d-viewer/dialogs/appearance_controls_3D.cpp:846
#: pcbnew/widgets/appearance_controls.cpp:2916
msgid "Select viewport:"
msgstr "뷰포트 선택:"

#: 3d-viewer/dialogs/appearance_controls_3D_base.cpp:36
#: pcbnew/widgets/appearance_controls_base.cpp:161
msgid "Presets (Ctrl+Tab):"
msgstr "사전 설정 (Ctrl+Tab):"

#: 3d-viewer/dialogs/appearance_controls_3D_base.cpp:55
#: pcbnew/widgets/appearance_controls_base.cpp:180
msgid "Viewports (Alt+Tab):"
msgstr "뷰포트(Alt+Tab):"

#: 3d-viewer/dialogs/appearance_controls_3D_base.cpp:59
#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:67
#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:261
#: pcbnew/widgets/appearance_controls_base.cpp:165
#: pcbnew/widgets/appearance_controls_base.cpp:184
msgid "(unsaved)"
msgstr "(저장되지 않음)"

#: 3d-viewer/dialogs/dialog_select_3d_model.cpp:95
#, c-format
msgid "All supported files (%s)"
msgstr "지원되는 모든 파일 (%s)"

#: 3d-viewer/dialogs/dialog_select_3d_model_base.cpp:58
msgid "Available paths:"
msgstr "사용 가능한 경로 :"

#: 3d-viewer/dialogs/dialog_select_3d_model_base.cpp:67
#: common/dialogs/dialog_configure_paths_base.h:61
msgid "Configure Paths"
msgstr "경로 구성"

#: 3d-viewer/dialogs/dialog_select_3d_model_base.h:63
msgid "Select 3D Model"
msgstr "3D 모델 선택"

#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:23
msgid "Render Options"
msgstr "렌더링 옵션"

#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:35
msgid "Clip silkscreen at via annuli"
msgstr "클립 실크 스크린 에서 비아 annuli"

#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:38
msgid "Clip silkscreen at solder mask edges"
msgstr "솔더 마스크 가장자리에서 실크 스크린 클립"

#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:41
msgid "Show filled areas in zones"
msgstr "구역에 채워진 영역 표시"

#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:44
msgid "Use bare copper color for unplated copper (slow)"
msgstr "도금되지 않은 구리에는 베어 구리 색상 사용 (느림)"

#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:45
msgid "Use different colors for plated and unplated copper. (Slow)"
msgstr "도금 된 구리와 도금되지 않은 구리에 다른 색상을 사용합니다. (느림)"

#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:52
msgid "Material properties:"
msgstr "재료 속성:"

#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:56
msgid "Realistic"
msgstr "실감"

#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:56
msgid "Solid colors"
msgstr "단색"

#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:56
msgid "CAD colors"
msgstr "CAD 색상"

#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:74
msgid "Camera Options"
msgstr "카메라 옵션"

#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:84
msgid "Rotation increment:"
msgstr "회전 증분 :"

#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:92
#: pcb_calculator/widgets/unit_selector.cpp:130
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:303
#: pcbnew/dialogs/dialog_create_array_base.cpp:404
#: pcbnew/dialogs/dialog_create_array_base.cpp:435
#: pcbnew/dialogs/dialog_move_exact_base.cpp:59
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:345
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:899
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:180
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:213
#: pcbnew/dialogs/panel_edit_options_base.cpp:45
msgid "deg"
msgstr "deg"

#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:102
msgid "Redraw while moving"
msgstr "이동중 다시 그리기"

#: 3d-viewer/dialogs/panel_3D_display_options_base.cpp:106
msgid "Redraw speed:"
msgstr "다시 그리기 속도:"

#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:19
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:17
msgid "Rendering Options"
msgstr "렌더링 옵션"

#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:32
msgid "Show model bounding boxes"
msgstr "모델 경계 상자 표시"

#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:35
msgid "Show copper and tech layers thickness (very slow)"
msgstr "구리 및 기술 레이어 두께 표시(매우 느림)"

#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:38
msgid "Highlight items on rollover"
msgstr "롤오버 시 항목 강조"

#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:44
msgid "Anti-aliasing:"
msgstr "안티-앨리어싱:"

#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:48
msgid "Disabled"
msgstr "비활성화됨"

#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:48
msgid "2x"
msgstr "2x"

#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:48
msgid "4x"
msgstr "4x"

#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:48
msgid "8x"
msgstr "8x"

#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:52
msgid "3D-Viewer must be closed and re-opened to apply this setting"
msgstr "이 설정을 적용하려면 3D 뷰어를 닫았다가 다시 열어야 함"

#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:56
msgid "Selection color:"
msgstr "색상 선택:"

#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:72
msgid "While Moving"
msgstr "이동 중"

#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:85
msgid "Disable anti-aliasing"
msgstr "안티-앨리어싱 비활성화"

#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:88
msgid "Disable thickness"
msgstr "두께 비활성화"

#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:91
msgid "Disable vias"
msgstr "비아 비활성화"

#: 3d-viewer/dialogs/panel_3D_opengl_options_base.cpp:94
msgid "Disable holes"
msgstr "홀 비활성화"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:27
msgid "Procedural textures (slow)"
msgstr "절차적 질감 (느림)"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:31
msgid "Add floor (slow)"
msgstr "바닥면 추가 (느림)"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:35
msgid "Anti-aliasing (slow)"
msgstr "안티-앨리어싱 (느림)"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:39
msgid ""
"Screen space ambient occlusions and global illumination reflections (slow)"
msgstr "화면 공간 주변 막힘 및 전역 조명 반사 (느림)"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:54
msgid "Number of Samples"
msgstr "샘플 수"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:58
msgid "Spread Factor %"
msgstr "확산 계수 %"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:62
msgid "Recursion Level"
msgstr "반복 레벨"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:66
msgid "Shadows:"
msgstr "그림자:"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:71
msgid ""
"Number of rays that will be cast, into light direction, to evaluate a shadow "
"point"
msgstr "그림자 점을 평가하기 위해 빛의 방향으로 투사되는 광선 수"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:81
msgid "Reflections:"
msgstr "반사 :"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:86
msgid "Number of rays that will be cast to evaluate a reflection point"
msgstr "반사점을 평가하기 위해 투사되는 광선 수"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:94
msgid ""
"Interactions number that a ray can travel through objects. (higher number of "
"levels improve results, specially on very transparent boards)"
msgstr ""
"광선이 객체를 통과할 수 있는 상호작용의 횟수입니다. (특히 매우 투명한 기판에"
"서, 레벨이 높을 수록 결과가 개선됩니다)"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:98
msgid "Refractions:"
msgstr "굴절:"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:103
msgid "Number of rays that will be cast to evaluate a refraction point"
msgstr "굴절 점을 평가하기 위해 투사되는 광선 수"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:111
msgid "Number of bounces that a ray can hit reflective objects"
msgstr "광선이 반사 물체에 닿을 수 있는 바운스 수"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:121
msgid "Lights Configuration"
msgstr "조명 구성"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:134
msgid "Ambient camera light:"
msgstr "주변 카메라 조명 :"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:146
msgid "Top light:"
msgstr "상단 조명:"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:158
msgid "Bottom light:"
msgstr "하단 조명:"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:184
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:201
msgid "Elevation (deg)"
msgstr "높이 (도)"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:188
#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:205
msgid "Azimuth (deg)"
msgstr "방위각 (도)"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:209
msgid "Light 1:"
msgstr "광선 1:"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:227
msgid "Light 5:"
msgstr "광선 5:"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:242
msgid "Light 2:"
msgstr "광선 2:"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:260
msgid "Light 6:"
msgstr "광선 6:"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:275
msgid "Light 3:"
msgstr "광선 3:"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:293
msgid "Light 7:"
msgstr "광선 7:"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:308
msgid "Light 4:"
msgstr "광선 4:"

#: 3d-viewer/dialogs/panel_3D_raytracing_options_base.cpp:326
msgid "Light 8:"
msgstr "광선 8:"

#: 3d-viewer/dialogs/panel_preview_3d_model.cpp:417
msgid "3D Preview Options"
msgstr "3D 미리보기 옵션"

#: 3d-viewer/dialogs/panel_preview_3d_model.cpp:417
msgid "Board thickness:"
msgstr "보드 두께:"

#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:21
#: common/dialogs/dialog_print_generic_base.cpp:56 eeschema/sch_bitmap.cpp:229
#: pcbnew/pcb_reference_image.cpp:257 pcbnew/pcb_reference_image.cpp:352
msgid "Scale"
msgstr "배율"

#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:29
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:74
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:119
#: common/dialogs/dialog_grid_settings_base.cpp:36
#: common/tool/common_tools.cpp:576
#: eeschema/dialogs/dialog_image_properties_base.cpp:34
#: eeschema/import_gfx/dialog_import_gfx_sch_base.cpp:61
#: pagelayout_editor/dialogs/properties_frame_base.cpp:248
#: pagelayout_editor/dialogs/properties_frame_base.cpp:301
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:73
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:115
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:421
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:32
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:58
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:92
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:118
#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:102
#: pcbnew/microwave/microwave_polygon.cpp:144
#: pcbnew/tools/pcb_point_editor.cpp:754
msgid "X:"
msgstr "X:"

#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:39
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:84
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:129
#: common/dialogs/dialog_grid_settings_base.cpp:57
#: common/tool/common_tools.cpp:576
#: eeschema/dialogs/dialog_image_properties_base.cpp:45
#: eeschema/import_gfx/dialog_import_gfx_sch_base.cpp:82
#: pagelayout_editor/dialogs/properties_frame_base.cpp:259
#: pagelayout_editor/dialogs/properties_frame_base.cpp:312
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:88
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:126
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:70
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:322
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:382
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:432
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:43
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:69
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:103
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:129
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:83
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:101
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:203
#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:119
#: pcbnew/microwave/microwave_polygon.cpp:153
#: pcbnew/tools/pcb_point_editor.cpp:754
msgid "Y:"
msgstr "Y:"

#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:49
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:94
#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:139
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:328
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:340
msgid "Z:"
msgstr "Z:"

#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:66
#: gerbview/gerber_draw_item.cpp:722 pcbnew/footprint.cpp:1331
#: pcbnew/pad.cpp:1044
msgid "Rotation"
msgstr "회전"

#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:111
msgid "Offset"
msgstr "오프셋"

#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:156
msgid "Opacity"
msgstr "불투명도"

#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:173
#: common/dialogs/dialog_page_settings_base.cpp:123
#: eeschema/printing/dialog_print_using_printer.cpp:269
#: pagelayout_editor/dialogs/dialogs_for_printing.cpp:253
msgid "Preview"
msgstr "미리보기"

#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:202
msgid ""
"Show or hide the board body\n"
"If hidden, show only copper and silkscreen layers."
msgstr ""
"보드 본체 표시 또는 숨기기\n"
"숨겨진 경우 구리 및 실크 스크린 레이어만 표시합니다."

#: 3d-viewer/dialogs/panel_preview_3d_model_base.cpp:231
msgid "Reload board and 3D models"
msgstr "보드와 3D 모델 다시 불러오기"

#: bitmap2component/bitmap2cmp_frame.cpp:151
#: bitmap2component/bitmap2cmp_frame.cpp:293
#: bitmap2component/bitmap2cmp_frame.cpp:356
#: kicad/tools/kicad_manager_actions.cpp:158
msgid "Image Converter"
msgstr "이미지 변환기"

#: bitmap2component/bitmap2cmp_frame.cpp:156
#: resources/linux/launchers/org.kicad.bitmap2component.desktop.in:11
msgid "KiCad Image Converter"
msgstr "KiCad 이미지 변환기"

#: bitmap2component/bitmap2cmp_frame.cpp:232
msgid "Image files"
msgstr "이미지 파일"

#: bitmap2component/bitmap2cmp_frame.cpp:282 eeschema/menubar.cpp:71
#: kicad/menubar.cpp:73 pagelayout_editor/menubar.cpp:63
#: pcbnew/menubar_pcb_editor.cpp:73
msgid "Open Recent"
msgstr "최근 파일 열기"

#: bitmap2component/bitmap2cmp_frame.cpp:283 eeschema/menubar.cpp:72
#: include/file_history.h:54 pagelayout_editor/menubar.cpp:64
#: pcbnew/menubar_pcb_editor.cpp:74
msgid "Clear Recent Files"
msgstr "최근 파일 지우기"

#: bitmap2component/bitmap2cmp_frame.cpp:400
#: eeschema/tools/sch_drawing_tools.cpp:653
#: pagelayout_editor/pl_editor_frame.cpp:865 pcbnew/tools/drawing_tool.cpp:671
msgid "Choose Image"
msgstr "이미지 선택"

#: bitmap2component/bitmap2cmp_frame.cpp:401
#: eeschema/tools/sch_drawing_tools.cpp:654
#: pagelayout_editor/pl_editor_frame.cpp:866 pcbnew/tools/drawing_tool.cpp:672
msgid "Image Files"
msgstr "이미지 파일"

#: bitmap2component/bitmap2cmp_frame.cpp:444
msgid "Create Drawing Sheet File"
msgstr "도면 시트 파일 생성"

#: bitmap2component/bitmap2cmp_frame.cpp:461
#: bitmap2component/bitmap2cmp_frame.cpp:497
#: bitmap2component/bitmap2cmp_frame.cpp:532
#: bitmap2component/bitmap2cmp_frame.cpp:567
#, c-format
msgid "File '%s' could not be created."
msgstr "'%s' 파일을 만들 수 없습니다."

#: bitmap2component/bitmap2cmp_frame.cpp:481
msgid "Create PostScript File"
msgstr "PostScript 파일 생성"

#: bitmap2component/bitmap2cmp_frame.cpp:517
msgid "Create Symbol Library"
msgstr "심볼 라이브러리 생성"

#: bitmap2component/bitmap2cmp_frame.cpp:552
msgid "Create Footprint Library"
msgstr "풋프린트 라이브러리 생성"

#: bitmap2component/bitmap2cmp_panel.cpp:50 common/eda_draw_frame.cpp:668
#: eeschema/dialogs/dialog_field_properties_base.cpp:220
#: eeschema/dialogs/dialog_field_properties_base.cpp:254
#: eeschema/dialogs/dialog_field_properties_base.cpp:265
#: eeschema/dialogs/dialog_label_properties_base.cpp:256
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:61
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:169
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:177
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:220
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:109
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:148
#: eeschema/dialogs/dialog_shape_properties_base.cpp:52
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:127
#: eeschema/dialogs/dialog_text_properties_base.cpp:190
#: eeschema/dialogs/dialog_text_properties_base.cpp:230
#: eeschema/import_gfx/dialog_import_gfx_sch_base.cpp:78
#: eeschema/import_gfx/dialog_import_gfx_sch_base.cpp:99
#: eeschema/import_gfx/dialog_import_gfx_sch_base.cpp:165
#: gerbview/dialogs/dialog_draw_layers_settings_base.cpp:45
#: gerbview/dialogs/dialog_draw_layers_settings_base.cpp:56
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:31
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:40
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:54
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:100
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:114
#: pagelayout_editor/dialogs/properties_frame_base.cpp:168
#: pagelayout_editor/dialogs/properties_frame_base.cpp:179
#: pagelayout_editor/dialogs/properties_frame_base.cpp:192
#: pagelayout_editor/dialogs/properties_frame_base.cpp:205
#: pagelayout_editor/dialogs/properties_frame_base.cpp:255
#: pagelayout_editor/dialogs/properties_frame_base.cpp:266
#: pagelayout_editor/dialogs/properties_frame_base.cpp:308
#: pagelayout_editor/dialogs/properties_frame_base.cpp:319
#: pagelayout_editor/dialogs/properties_frame_base.cpp:361
#: pagelayout_editor/dialogs/properties_frame_base.cpp:427
#: pagelayout_editor/dialogs/properties_frame_base.cpp:440
#: pagelayout_editor/dialogs/properties_frame_base.cpp:484
#: pagelayout_editor/dialogs/properties_frame_base.cpp:498
#: pagelayout_editor/dialogs/properties_frame_base.cpp:512
#: pagelayout_editor/dialogs/properties_frame_base.cpp:526
#: pagelayout_editor/dialogs/properties_frame_base.cpp:561
#: pagelayout_editor/dialogs/properties_frame_base.cpp:575
#: pagelayout_editor/dialogs/properties_frame_base.cpp:589
#: pagelayout_editor/dialogs/properties_frame_base.cpp:603
#: pagelayout_editor/pl_editor_frame.cpp:757
#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:264
#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:278
#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:294
#: pcb_calculator/widgets/unit_selector.cpp:34
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:147
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:171
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:206
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:219
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:249
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:262
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:314
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:325
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:375
#: pcbnew/dialogs/dialog_create_array_base.cpp:77
#: pcbnew/dialogs/dialog_create_array_base.cpp:90
#: pcbnew/dialogs/dialog_create_array_base.cpp:114
#: pcbnew/dialogs/dialog_create_array_base.cpp:127
#: pcbnew/dialogs/dialog_create_array_base.cpp:296
#: pcbnew/dialogs/dialog_create_array_base.cpp:307
#: pcbnew/dialogs/dialog_create_array_base.cpp:344
#: pcbnew/dialogs/dialog_create_array_base.cpp:355
#: pcbnew/dialogs/dialog_create_array_base.cpp:377
#: pcbnew/dialogs/dialog_export_idf_base.cpp:48
#: pcbnew/dialogs/dialog_export_step_base.cpp:72
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:67
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:109
#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:242
#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:273
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:92
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:108
#: pcbnew/dialogs/dialog_move_exact_base.cpp:31
#: pcbnew/dialogs/dialog_move_exact_base.cpp:45
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:66
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:77
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:121
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:168
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:318
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:329
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:378
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:389
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:428
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:439
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:471
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:741
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:789
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:877
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:888
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:958
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:971
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:984
#: pcbnew/dialogs/dialog_plot_base.cpp:259
#: pcbnew/dialogs/dialog_plot_base.cpp:312
#: pcbnew/dialogs/dialog_position_relative_base.cpp:73
#: pcbnew/dialogs/dialog_position_relative_base.cpp:90
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:135
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:90
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:108
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:133
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:144
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:210
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:234
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:245
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:256
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:476
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:507
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:55
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:72
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:89
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:105
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:121
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:137
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:153
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:194
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:210
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:251
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:267
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:308
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:322
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:336
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:379
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:65
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:80
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:91
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:114
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:99
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:139
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:281
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:321
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:463
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:503
#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:68
#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:136
#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:185
#: pcbnew/tools/convert_tool.cpp:100 pcbnew/tools/convert_tool.cpp:105
msgid "mm"
msgstr "mm"

#: bitmap2component/bitmap2cmp_panel.cpp:50
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:109
msgid "Inch"
msgstr "인치"

#: bitmap2component/bitmap2cmp_panel.cpp:50
msgid "DPI"
msgstr "DPI"

#: bitmap2component/bitmap2cmp_panel.cpp:513
msgid "Unable to export to the Clipboard"
msgstr "클립보드로 내보낼 수 없음"

#: bitmap2component/bitmap2cmp_panel.cpp:540
msgid "Error allocating memory for potrace bitmap"
msgstr "포트레이스 비트맵에 메모리 할당 오류"

#: bitmap2component/bitmap2cmp_panel.cpp:567
#: common/widgets/wx_html_report_panel_base.cpp:41
#: eeschema/dialogs/dialog_erc_base.cpp:136 gerbview/files.cpp:399
#: gerbview/readgerb.cpp:77
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:1263
#: pcbnew/dialogs/dialog_drc_base.cpp:186
#: pcbnew/dialogs/dialog_footprint_checker_base.cpp:43
msgid "Errors"
msgstr "오류"

#: bitmap2component/bitmap2cmp_panel_base.cpp:22
msgid "Original Picture"
msgstr "원본 사진"

#: bitmap2component/bitmap2cmp_panel_base.cpp:25
msgid "Greyscale Picture"
msgstr "그레이 스케일 사진"

#: bitmap2component/bitmap2cmp_panel_base.cpp:28
msgid "Black && White Picture"
msgstr "흑백 사진"

#: bitmap2component/bitmap2cmp_panel_base.cpp:36
msgid "Image Information"
msgstr "이미지 정보"

#: bitmap2component/bitmap2cmp_panel_base.cpp:45
msgid "Image size:"
msgstr "이미지 크기:"

#: bitmap2component/bitmap2cmp_panel_base.cpp:49
#: bitmap2component/bitmap2cmp_panel_base.cpp:53
#: bitmap2component/bitmap2cmp_panel_base.cpp:65
#: bitmap2component/bitmap2cmp_panel_base.cpp:69
#: bitmap2component/bitmap2cmp_panel_base.cpp:81
msgid "0000"
msgstr "0000"

#: bitmap2component/bitmap2cmp_panel_base.cpp:57
#: common/widgets/gal_options_panel_base.cpp:87
#: common/widgets/gal_options_panel_base.cpp:98
msgid "pixels"
msgstr "픽셀"

#: bitmap2component/bitmap2cmp_panel_base.cpp:61
msgid "Image PPI:"
msgstr "이미지 PPI:"

#: bitmap2component/bitmap2cmp_panel_base.cpp:73 eeschema/sch_bitmap.cpp:228
#: pcbnew/pcb_reference_image.cpp:256
msgid "PPI"
msgstr "PPI"

#: bitmap2component/bitmap2cmp_panel_base.cpp:77
msgid "BPP:"
msgstr "BPP:"

#: bitmap2component/bitmap2cmp_panel_base.cpp:85
msgid "bits"
msgstr "비트"

#: bitmap2component/bitmap2cmp_panel_base.cpp:98
msgid "Load Source Image"
msgstr "소스 이미지 로드"

#: bitmap2component/bitmap2cmp_panel_base.cpp:105
msgid "Output Size"
msgstr "출력 크기"

#: bitmap2component/bitmap2cmp_panel_base.cpp:107
msgid "Lock height / width ratio"
msgstr "높이 / 너비 비율 잠금"

#: bitmap2component/bitmap2cmp_panel_base.cpp:113
#: common/dialogs/dialog_page_settings_base.cpp:37
#: pcbnew/dialogs/dialog_target_properties_base.cpp:28
msgid "Size:"
msgstr "크기:"

#: bitmap2component/bitmap2cmp_panel_base.cpp:117
#: bitmap2component/bitmap2cmp_panel_base.cpp:122
msgid "300"
msgstr "300"

#: bitmap2component/bitmap2cmp_panel_base.cpp:141
#: common/dialogs/dialog_print_generic_base.cpp:24
#: eeschema/dialogs/dialog_annotate_base.cpp:89
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:49
#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:25
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:49
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:99
#: include/lib_table_grid.h:195
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:200
#: pcbnew/dialogs/dialog_export_svg_base.cpp:79
#: pcbnew/dialogs/dialog_import_netlist_base.cpp:51
#: pcbnew/dialogs/dialog_push_pad_properties_base.cpp:23
#: pcbnew/dialogs/dialog_update_pcb_base.cpp:25
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:49
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:98
msgid "Options"
msgstr "설정"

#: bitmap2component/bitmap2cmp_panel_base.cpp:143
msgid "Black / white threshold:"
msgstr "흑백 임계 값 :"

#: bitmap2component/bitmap2cmp_panel_base.cpp:148
msgid ""
"Adjust the level to convert the greyscale picture to a black and white "
"picture."
msgstr "그레이 스케일 그림을 흑백 그림으로 변환하기 위한 레벨을 조정합니다."

#: bitmap2component/bitmap2cmp_panel_base.cpp:152
#: gerbview/gerber_file_image.cpp:354
msgid "Negative"
msgstr "네거티브"

#: bitmap2component/bitmap2cmp_panel_base.cpp:158
msgid "Pcb Layer for Graphics"
msgstr "그래픽용 PCB 레이어"

#: bitmap2component/bitmap2cmp_panel_base.cpp:160
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:525
msgid "Front silk screen"
msgstr "전면 실크 스크린"

#: bitmap2component/bitmap2cmp_panel_base.cpp:160
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:531
msgid "Front solder mask"
msgstr "전면 솔더 마스크"

#: bitmap2component/bitmap2cmp_panel_base.cpp:160
msgid "Front Fab layer"
msgstr "전면 Fab 레이어"

#: bitmap2component/bitmap2cmp_panel_base.cpp:160
msgid "User layer drawings"
msgstr "사용자 레이어 도면"

#: bitmap2component/bitmap2cmp_panel_base.cpp:160
msgid "User layer comments"
msgstr "사용자 레이어 설명"

#: bitmap2component/bitmap2cmp_panel_base.cpp:160
msgid "User layer Eco1"
msgstr "사용자 레이어 Eco1"

#: bitmap2component/bitmap2cmp_panel_base.cpp:160
msgid "User layer Eco2"
msgstr "사용자 레이어 Eco2"

#: bitmap2component/bitmap2cmp_panel_base.cpp:169
msgid "Symbol (.kicad_sym file)"
msgstr "심볼 (.kicad_sym 파일)"

#: bitmap2component/bitmap2cmp_panel_base.cpp:169
msgid "Footprint (.kicad_mod file)"
msgstr "풋프린트 (.kicad_mod 파일)"

#: bitmap2component/bitmap2cmp_panel_base.cpp:169
msgid "Postscript (.ps file)"
msgstr "Postscript (.ps 파일)"

#: bitmap2component/bitmap2cmp_panel_base.cpp:169
msgid "Drawing Sheet (.kicad_wks file)"
msgstr "도면 시트 (.kicad_wks 파일)"

#: bitmap2component/bitmap2cmp_panel_base.cpp:171
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:44
msgid "Output Format"
msgstr "출력 형식"

#: bitmap2component/bitmap2cmp_panel_base.cpp:175
msgid "Export to File"
msgstr "파일로 내보내기"

#: bitmap2component/bitmap2cmp_panel_base.cpp:178
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:147
msgid "Export to Clipboard"
msgstr "클립보드로 내보내기"

#: common/background_jobs_monitor.cpp:97
msgid "Background Jobs"
msgstr "배경 작업"

#: common/common.cpp:287
#, c-format
msgid ""
"Environment variables expansion failed: missing '%c' at position %u in '%s'."
msgstr "환경 변수 확장 실패: '%c'이(가) %u 위치의 '%s'에 없습니다."

#: common/common.cpp:375
#, c-format
msgid "Cannot make path '%s' absolute with respect to '%s'."
msgstr "경로 '%s'을(를) '%s'에 대해 절대 경로로 만들 수 없습니다."

#: common/common.cpp:394
#, c-format
msgid "Output directory '%s' created."
msgstr "출력 디렉토리 '%s'이(가) 생성되었습니다."

#: common/common.cpp:403
#, c-format
msgid "Cannot create output directory '%s'."
msgstr "출력 디렉토리 '%s'을(를) 생성할 수 없습니다."

#: common/common.cpp:694
msgid "This operating system is not supported by KiCad and its dependencies."
msgstr "이 운영 체제는 KiCad 및 해당 종속 항목에서 지원하지 않습니다."

#: common/common.cpp:696
msgid "Unsupported Operating System"
msgstr "지원하지 않는 운영 체제"

#: common/common.cpp:699
msgid ""
"Any issues with KiCad on this system cannot be reported to the official "
"bugtracker."
msgstr "이 시스템의 KiCad 관련 문제는 공식 버그 트래커에 보고할 수 없습니다."

#: common/confirm.cpp:58
msgid "Do not show again"
msgstr "다시 표시 안 함"

#: common/confirm.cpp:128
msgid "Message"
msgstr "메시지"

#: common/confirm.cpp:129
msgid "Question"
msgstr "질문"

#: common/confirm.cpp:130 common/confirm.cpp:297
#: common/dialogs/panel_setup_severities.cpp:43
#: eeschema/dialogs/dialog_plot_schematic.cpp:462
#: eeschema/dialogs/dialog_plot_schematic.cpp:475
#: eeschema/dialogs/dialog_plot_schematic.cpp:497
#: eeschema/dialogs/panel_eeschema_color_settings.cpp:148
#: eeschema/files-io.cpp:439 eeschema/import_gfx/dialog_import_gfx_sch.cpp:264
#: eeschema/sheet.cpp:707 eeschema/symbol_editor/symbol_editor.cpp:131
#: eeschema/symbol_editor/symbol_editor.cpp:525
#: eeschema/symbol_editor/symbol_editor.cpp:820
#: eeschema/symbol_editor/symbol_editor.cpp:1221
#: pcbnew/dialogs/dialog_export_vrml.cpp:194
#: pcbnew/import_gfx/dialog_import_graphics.cpp:294 pcbnew/pcb_marker.cpp:203
msgid "Warning"
msgstr "경고"

#: common/confirm.cpp:161 common/confirm.cpp:167
msgid "File Open Warning"
msgstr "파일 열기 경고"

#: common/confirm.cpp:163 common/confirm.cpp:169
msgid "Interleaved saves may produce very unexpected results."
msgstr "인터리브 저장 시 매우 예상치 못한 결과가 발생할 수 있습니다."

#: common/confirm.cpp:165 common/confirm.cpp:170 common/confirm.cpp:234
#: common/confirm.cpp:261 common/dialogs/git/dialog_git_auth.cpp:54
#: common/dialogs/git/dialog_git_commit.cpp:127
#: common/dialogs/git/dialog_git_switch.cpp:68 common/tool/actions.cpp:145
#: eeschema/dialogs/dialog_erc.cpp:408
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1234
#: gerbview/dialogs/dialog_select_one_pcb_layer.cpp:168
#: kicad/pcm/dialogs/dialog_pcm_progress_base.cpp:66
#: pcbnew/dialogs/dialog_drc.cpp:311
#: pcbnew/dialogs/dialog_unused_pad_layers.cpp:53
msgid "Cancel"
msgstr "취소"

#: common/confirm.cpp:165 common/confirm.cpp:170
msgid "Open Anyway"
msgstr "무시하고 열기"

#: common/confirm.cpp:181 common/confirm.cpp:218
msgid "Save Changes?"
msgstr "변경 사항을 저장 할까요?"

#: common/confirm.cpp:183 common/confirm.cpp:220
msgid "If you don't save, all your changes will be permanently lost."
msgstr "저장하지 않으면 모든 변경 사항이 영구적으로 손실됩니다."

#: common/confirm.cpp:185 common/confirm.cpp:221 common/tool/actions.cpp:77
#: eeschema/symbol_editor/symbol_editor.cpp:608
#: eeschema/widgets/tuner_slider_base.cpp:117
#: pcbnew/footprint_libraries_utils.cpp:1004
msgid "Save"
msgstr "저장"

#: common/confirm.cpp:185 common/confirm.cpp:221
msgid "Discard Changes"
msgstr "변경 사항 무시"

#: common/confirm.cpp:188 common/confirm.cpp:267
msgid "Apply to all"
msgstr "모두에 적용"

#: common/confirm.cpp:233
msgid "Your current changes will be permanently lost."
msgstr "현재 변경 내용이 영구적으로 손실됩니다."

#: common/confirm.cpp:234 common/tool/actions.cpp:107
msgid "Revert"
msgstr "되돌리기"

#: common/confirm.cpp:260 common/dialogs/git/dialog_git_auth.cpp:53
#: common/dialogs/git/dialog_git_commit.cpp:126
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1233
#: gerbview/dialogs/dialog_select_one_pcb_layer.cpp:164
msgid "OK"
msgstr "확인"

#: common/confirm.cpp:349
msgid "Information"
msgstr "정보"

#: common/confirm.cpp:376 common/confirm.cpp:379
#: eeschema/symbol_editor/symbol_editor.cpp:397
#: eeschema/symbol_editor/symbol_editor.cpp:701
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:131
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:198
#: eeschema/tools/symbol_editor_control.cpp:378
#: eeschema/tools/symbol_editor_pin_tool.cpp:233 kicad/import_project.cpp:108
#: kicad/tools/kicad_manager_control.cpp:326
#: pcbnew/dialogs/dialog_export_idf.cpp:174
#: pcbnew/dialogs/dialog_gencad_export_options.cpp:121
#: pcbnew/dialogs/dialog_track_via_properties.cpp:571
#: pcbnew/footprint_libraries_utils.cpp:375
#: pcbnew/footprint_libraries_utils.cpp:1116
#: pcbnew/footprint_libraries_utils.cpp:1256 pcbnew/router/router_tool.cpp:1876
#: pcbnew/router/router_tool.cpp:2559
#: pcbnew/tools/footprint_editor_control.cpp:450 pcbnew/zone_filler.cpp:731
msgid "Confirmation"
msgstr "확인"

#: common/confirm.cpp:383 eeschema/lib_field.cpp:548 eeschema/lib_pin.cpp:1196
#: eeschema/sch_field.cpp:912 eeschema/sch_pin.cpp:261
#: gerbview/gerber_draw_item.cpp:729 gerbview/gerber_draw_item.cpp:730
#: pcbnew/board_stackup_manager/panel_board_finish_base.cpp:44
#: pcbnew/pcb_text.cpp:235 pcbnew/pcb_text.cpp:239 pcbnew/pcb_textbox.cpp:364
#: pcbnew/tools/drawing_stackup_table_tool.cpp:457
#: pcbnew/tools/drawing_stackup_table_tool.cpp:488
#: pcbnew/tools/drawing_stackup_table_tool.cpp:496
#: pcbnew/tools/drawing_stackup_table_tool.cpp:507
msgid "Yes"
msgstr "예"

#: common/confirm.cpp:383 eeschema/lib_field.cpp:548 eeschema/lib_pin.cpp:1196
#: eeschema/sch_field.cpp:912 eeschema/sch_pin.cpp:261
#: gerbview/gerber_draw_item.cpp:729 gerbview/gerber_draw_item.cpp:730
#: pcbnew/pcb_text.cpp:235 pcbnew/pcb_text.cpp:239 pcbnew/pcb_textbox.cpp:364
#: pcbnew/tools/drawing_stackup_table_tool.cpp:457
#: pcbnew/tools/drawing_stackup_table_tool.cpp:488
#: pcbnew/tools/drawing_stackup_table_tool.cpp:496
#: pcbnew/tools/drawing_stackup_table_tool.cpp:506
msgid "No"
msgstr "아니오"

#: common/dialog_about/AboutDialog_main.cpp:115
#: common/lib_tree_model_adapter.cpp:135 common/lib_tree_model_adapter.cpp:137
#: common/lib_tree_model_adapter.cpp:147
#: common/widgets/widget_hotkey_list.cpp:527
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:50
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:100
#: eeschema/sch_symbol.cpp:1948 eeschema/symbol_editor/symbol_editor.cpp:579
#: eeschema/symbol_editor/symbol_editor.cpp:1295
#: eeschema/symbol_viewer_frame.cpp:460 include/lib_table_grid.h:196
#: kicad/pcm/dialogs/panel_package_base.cpp:59
#: pcbnew/dialogs/dialog_footprint_wizard_list_base.cpp:43
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:50
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:99
#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:40
#: pcbnew/footprint_libraries_utils.cpp:974
#: pcbnew/footprint_libraries_utils.cpp:1354
msgid "Description"
msgstr "설명"

#: common/dialog_about/AboutDialog_main.cpp:119
msgid ""
"The KiCad EDA Suite is a set of open source applications for the creation of "
"electronic schematics and printed circuit boards."
msgstr ""
"KiCad EDA 제품군은 전자 회로도 및 인쇄 회로 기판 생성을 위한 오픈 소스 애플리"
"케이션 세트입니다."

#: common/dialog_about/AboutDialog_main.cpp:127
msgid "KiCad on the web"
msgstr "웹상의 KiCad"

#: common/dialog_about/AboutDialog_main.cpp:133
msgid "The official KiCad website - "
msgstr "KiCad 공식 웹 사이트 - "

#: common/dialog_about/AboutDialog_main.cpp:137
msgid "Developer website - "
msgstr "개발자 웹사이트 - "

#: common/dialog_about/AboutDialog_main.cpp:142
msgid "Official KiCad library repositories - "
msgstr "공식 KiCad 라이브러리 저장소 - "

#: common/dialog_about/AboutDialog_main.cpp:149
msgid "Bug tracker"
msgstr "버그 추적기"

#: common/dialog_about/AboutDialog_main.cpp:155
msgid "Report or examine bugs - "
msgstr "버그를 보고하거나 검사 - "

#: common/dialog_about/AboutDialog_main.cpp:161
msgid "KiCad users group and community"
msgstr "KiCad 사용자 그룹 및 커뮤니티"

#: common/dialog_about/AboutDialog_main.cpp:166
msgid "KiCad forum - "
msgstr "KiCad 포럼 - "

#: common/dialog_about/AboutDialog_main.cpp:180
msgid "The complete KiCad EDA Suite is released under the"
msgstr "전체 KiCad EDA 제품군은 이하의 라이선스를 바탕으로 제공됩니다"

#: common/dialog_about/AboutDialog_main.cpp:182
msgid "GNU General Public License (GPL) version 3 or any later version"
msgstr "GNU 일반 공공 라이센스 (GPL) 버전 3 또는 이후 버전"

#: common/dialog_about/AboutDialog_main.cpp:201
msgid "Lead Development Team"
msgstr "리드 개발팀"

#: common/dialog_about/AboutDialog_main.cpp:202
msgid "Lead Development Alumni"
msgstr "리드 개발 동문"

#: common/dialog_about/AboutDialog_main.cpp:203
msgid "Additional Contributions By"
msgstr "추가 기여자"

#: common/dialog_about/AboutDialog_main.cpp:1139
msgid "Librarian Team"
msgstr "사서 팀"

#: common/dialog_about/AboutDialog_main.cpp:1215
msgid "3D models by"
msgstr "3D 모델 작성자"

#: common/dialog_about/AboutDialog_main.cpp:1227
msgid "Symbols by"
msgstr "심볼 작성자"

#: common/dialog_about/AboutDialog_main.cpp:1234
msgid "Footprints by"
msgstr "풋프린트 작성자"

#: common/dialog_about/AboutDialog_main.cpp:1247
msgid "Icons by"
msgstr "아이콘 작성자"

#: common/dialog_about/AboutDialog_main.cpp:1262
msgid "Package Developers"
msgstr "패키지 개발자"

#: common/dialog_about/dialog_about.cpp:99
#, c-format
msgid "About %s"
msgstr "%s 정보"

#: common/dialog_about/dialog_about.cpp:128
#: common/dialog_about/dialog_about_base.h:58
msgid "About"
msgstr "소개"

#: common/dialog_about/dialog_about.cpp:133
#: kicad/pcm/dialogs/dialog_pcm_base.cpp:87
#: kicad/pcm/dialogs/panel_packages_view_base.cpp:90
msgid "Version"
msgstr "버전"

#: common/dialog_about/dialog_about.cpp:135
msgid "Developers"
msgstr "개발자"

#: common/dialog_about/dialog_about.cpp:137
msgid "Doc Writers"
msgstr "문서 작성자"

#: common/dialog_about/dialog_about.cpp:140
msgid "Librarians"
msgstr "라이브러리 개발자"

#: common/dialog_about/dialog_about.cpp:143
msgid "Artists"
msgstr "UI 디자이너"

#: common/dialog_about/dialog_about.cpp:145
msgid "Translators"
msgstr "번역가"

#: common/dialog_about/dialog_about.cpp:147
msgid "Packagers"
msgstr "패키지 작성자"

#: common/dialog_about/dialog_about.cpp:150
msgid "License"
msgstr "라이센스"

#: common/dialog_about/dialog_about.cpp:464
msgid "Could not open clipboard to write version information."
msgstr "버전 정보를 작성하기 위해 클립보드를 열 수 없습니다."

#: common/dialog_about/dialog_about.cpp:465
msgid "Clipboard Error"
msgstr "클립보드 오류"

#: common/dialog_about/dialog_about.cpp:474
msgid "Copied..."
msgstr "복사됨…"

#: common/dialog_about/dialog_about_base.cpp:31
msgid "App Title"
msgstr "앱 제목"

#: common/dialog_about/dialog_about_base.cpp:37
msgid "Copyright Info"
msgstr "저작권 정보"

#: common/dialog_about/dialog_about_base.cpp:41
msgid "Build Version Info"
msgstr "빌드 버전 정보"

#: common/dialog_about/dialog_about_base.cpp:45
msgid "Lib Version Info"
msgstr "라이브러리 버전 정보"

#: common/dialog_about/dialog_about_base.cpp:58
msgid "&Copy Version Info"
msgstr "버전 정보 복사 (&C)"

#: common/dialog_about/dialog_about_base.cpp:59
msgid "Copy KiCad version info to the clipboard"
msgstr "클립보드에 KiCad 버전 정보 복사"

#: common/dialog_about/dialog_about_base.cpp:63
msgid "&Report Bug"
msgstr "버그 제보하기 (&R)"

#: common/dialog_about/dialog_about_base.cpp:64 common/tool/actions.cpp:1006
msgid "Report a problem with KiCad"
msgstr "KiCad에 문제 보고"

#: common/dialog_about/dialog_about_base.cpp:68 common/tool/actions.cpp:999
msgid "Donate"
msgstr "기부하기"

#: common/dialog_about/dialog_about_base.cpp:69
#: common/tool/common_control.cpp:312
msgid "Donate to KiCad"
msgstr "KiCad에 기부하기"

#: common/dialog_about/dialog_about_base.cpp:94 common/dialog_shim.cpp:746
msgid "&OK"
msgstr "확인 (&O)"

#: common/dialog_shim.cpp:747
msgid "&Cancel"
msgstr "취소 (&C)"

#: common/dialog_shim.cpp:748
msgid "&Yes"
msgstr "예(&Y)"

#: common/dialog_shim.cpp:749
msgid "&No"
msgstr "아니오(&N)"

#: common/dialog_shim.cpp:750
msgid "&Apply"
msgstr "적용 (&A)"

#: common/dialog_shim.cpp:751
msgid "&Save"
msgstr "저장 (&S)"

#: common/dialog_shim.cpp:752 common/dialog_shim.cpp:753
#: common/eda_base_frame.cpp:500 common/eda_base_frame.cpp:505
#: common/eda_base_frame.cpp:526 common/eda_base_frame.cpp:530
msgid "&Help"
msgstr "도움말 (&H)"

#: common/dialogs/dialog_HTML_reporter_base.h:48
#: common/dialogs/dialog_book_reporter_base.h:45
msgid "Report"
msgstr "보고서"

#: common/dialogs/dialog_assign_netclass.cpp:109
msgid "<b>Currently matching nets:</b>"
msgstr "<b>현재 일치하는 네트:</b>"

#: common/dialogs/dialog_assign_netclass_base.cpp:24
#, fuzzy
msgid "Pattern:"
msgstr "패턴"

#: common/dialogs/dialog_assign_netclass_base.cpp:33
#, fuzzy
msgid "Net class:"
msgstr "네트 클래스"

#: common/dialogs/dialog_assign_netclass_base.cpp:51
msgid ""
"Note: complete netclass assignments can be edited in Schematic Setup > "
"Project."
msgstr ""

#: common/dialogs/dialog_assign_netclass_base.h:56
#, fuzzy
msgid "Add Netclass Assignment"
msgstr "네트클래스 할당:"

#: common/dialogs/dialog_color_picker.cpp:94
msgid "Clear Color"
msgstr "선명한 색상"

#: common/dialogs/dialog_color_picker_base.cpp:31
msgid "RGB"
msgstr "RGB"

#: common/dialogs/dialog_color_picker_base.cpp:46
msgid "Red:"
msgstr "빨간색:"

#: common/dialogs/dialog_color_picker_base.cpp:50
msgid "Green:"
msgstr "녹색:"

#: common/dialogs/dialog_color_picker_base.cpp:54
msgid "Blue:"
msgstr "파란색:"

#: common/dialogs/dialog_color_picker_base.cpp:74
msgid "HSV"
msgstr "HSV"

#: common/dialogs/dialog_color_picker_base.cpp:91
msgid "Hue:"
msgstr "색조:"

#: common/dialogs/dialog_color_picker_base.cpp:95
msgid "Saturation:"
msgstr "채도:"

#: common/dialogs/dialog_color_picker_base.cpp:114
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:96
#: pcbnew/dialogs/dialog_text_properties.cpp:112
msgid "Value:"
msgstr "값:"

#: common/dialogs/dialog_color_picker_base.cpp:134
#: common/dialogs/dialog_color_picker_base.h:94
msgid "Color Picker"
msgstr "색상 선택기"

#: common/dialogs/dialog_color_picker_base.cpp:154
msgid "Defined Colors"
msgstr "정의된 색상"

#: common/dialogs/dialog_color_picker_base.cpp:163
msgid "Opacity:"
msgstr "불투명도 :"

#: common/dialogs/dialog_color_picker_base.cpp:182
msgid "Preview (old/new):"
msgstr "미리보기 (이전/신규):"

#: common/dialogs/dialog_color_picker_base.cpp:207
msgid "Reset to Default"
msgstr "기본값으로 초기화"

#: common/dialogs/dialog_configure_paths.cpp:192
#: common/dialogs/dialog_configure_paths.cpp:250
msgid "Environment variable name cannot be empty."
msgstr "환경 변수 이름은 비워둘 수 없습니다."

#: common/dialogs/dialog_configure_paths.cpp:200
#: common/dialogs/dialog_configure_paths.cpp:252
msgid "Environment variable path cannot be empty."
msgstr "환경 변수 경로는 비워 둘 수 없습니다."

#: common/dialogs/dialog_configure_paths.cpp:257
msgid "3D search path alias cannot be empty."
msgstr "3D 검색 경로 별칭은 비워둘 수 없습니다."

#: common/dialogs/dialog_configure_paths.cpp:259
msgid "3D search path cannot be empty."
msgstr "3D 검색 경로는 비워둘 수 없습니다."

#: common/dialogs/dialog_configure_paths.cpp:274
msgid ""
"This path was defined  externally to the running process and\n"
"will only be temporarily overwritten."
msgstr ""
"이 경로는 실행 중인 프로세스의 외부에서 정의되었으며\n"
"일시적으로만 덮어씁니다."

#: common/dialogs/dialog_configure_paths.cpp:276
msgid ""
"The next time KiCad is launched, any paths that have already\n"
"been defined are honored and any settings defined in the path\n"
"configuration dialog are ignored.  If you did not intend for\n"
"this behavior, either rename any conflicting entries or remove\n"
"the external environment variable(s) from your system."
msgstr ""
"다음에 KiCad를 시작하면 이미 정의된 모든 경로가 적용되고\n"
"경로 구성 대화 상자에 정의된 모든 설정이 무시됩니다.\n"
"이 동작을 의도하지 않은 경우\n"
"충돌하는 항목의 이름을 변경하거나\n"
"외부 환경 변수를 시스템에서 제거하십시오."

#: common/dialogs/dialog_configure_paths.cpp:294
#, c-format
msgid "The name %s is reserved, and cannot be used."
msgstr "이름 %s은(는) 예약되어 있으며, 사용할 수 없습니다."

#: common/dialogs/dialog_configure_paths.cpp:398
msgid ""
"Enter the name and value for each environment variable.  Grey entries are "
"names that have been defined externally at the system or user level.  "
"Environment variables defined at the system or user level take precedence "
"over the ones defined in this table.  This means the values in this table "
"are ignored."
msgstr ""
"각 환경 변수의 이름과 값을 입력합니다.  회색 항목은 시스템 또는 사용자 수준에"
"서 외부에서 정의된 이름입니다.  시스템 또는 사용자 수준에서 정의된 환경 변수"
"가 이 표에 정의된 변수보다 우선합니다.  즉, 이 테이블의 값은 무시됩니다."

#: common/dialogs/dialog_configure_paths.cpp:404
msgid ""
"To ensure environment variable names are valid on all platforms, the name "
"field will only accept upper case letters, digits, and the underscore "
"characters."
msgstr ""
"환경 변수 이름이 모든 플랫폼에서 유효한지 확인하기 위해 이름 필드는 대문자, "
"숫자 및 밑줄 문자만 허용합니다."

#: common/dialogs/dialog_configure_paths_base.cpp:23
msgid "Environment Variables"
msgstr "환경 변수"

#: common/dialogs/dialog_configure_paths_base.cpp:39
#: common/dialogs/git/dialog_git_auth.cpp:56
#: common/dialogs/git/dialog_git_repository_base.cpp:32
#: common/dialogs/git/panel_git_repos_base.cpp:98
#: common/dialogs/panel_setup_netclasses_base.cpp:51
#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:88
#: eeschema/dialogs/dialog_label_properties_base.cpp:87
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:121
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:89
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:59
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:60
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:196
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:56
#: eeschema/dialogs/panel_bom_presets_base.cpp:40
#: eeschema/dialogs/panel_bom_presets_base.cpp:80
#: eeschema/dialogs/panel_sym_lib_table.cpp:367
#: eeschema/dialogs/panel_template_fieldnames_base.cpp:42
#: eeschema/fields_grid_table.cpp:343 eeschema/lib_pin.cpp:1191
#: eeschema/sch_pin.cpp:256 eeschema/sch_symbol.cpp:1910
#: eeschema/sch_symbol.cpp:1960 eeschema/symbol_editor/symbol_editor.cpp:1265
#: eeschema/symbol_viewer_frame.cpp:458
#: eeschema/widgets/search_handlers.cpp:301
#: eeschema/widgets/tuner_slider_base.cpp:27
#: kicad/pcm/dialogs/dialog_manage_repositories_base.cpp:39
#: kicad/pcm/dialogs/panel_package_base.cpp:50
#: pcbnew/dialogs/dialog_footprint_wizard_list_base.cpp:42
#: pcbnew/dialogs/dialog_net_inspector.cpp:986
#: pcbnew/dialogs/panel_fp_lib_table.cpp:412
#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:38
#: pcbnew/fp_text_grid_table.cpp:137 pcbnew/widgets/search_handlers.cpp:140
#: pcbnew/widgets/search_handlers.cpp:273
#: pcbnew/widgets/search_handlers.cpp:352 pcbnew/zone.cpp:625
#: pcbnew/zone.cpp:1638
msgid "Name"
msgstr "이름"

#: common/dialogs/dialog_configure_paths_base.cpp:40
#: common/dialogs/git/panel_git_repos_base.cpp:99
#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:41
msgid "Path"
msgstr "경로"

#: common/dialogs/dialog_global_lib_table_config.cpp:41
#, c-format
msgid "Configure Global %s Library Table"
msgstr "전역 %s 라이브러리 테이블 설정"

#: common/dialogs/dialog_global_lib_table_config.cpp:44
#, c-format
msgid ""
"KiCad has been run for the first time using the new %s library table for\n"
"accessing libraries.  In order for KiCad to access %s libraries,\n"
"you must configure your global %s library table.  Please select from one\n"
"of the options below.  If you are not sure which option to select, please\n"
"use the default selection."
msgstr ""
"KiCad는 라이브러리에 액세스하기 위해 새로운 %s 라이브러리 테이블을\n"
"사용하여 처음으로 실행되었습니다.  KiCad가 %s 라이브러리에 액세스하려면\n"
"전역 %s 라이브러리 테이블을 구성해야 합니다.\n"
"아래 옵션 중 하나를 선택하십시오.\n"
"어떤 옵션을 선택해야 할지 잘 모르겠으면 기본 선택 항목을 선택하십시오."

#: common/dialogs/dialog_global_lib_table_config.cpp:51
#, c-format
msgid "Copy default global %s library table (recommended)"
msgstr "기본 전역 %s 라이브러리 테이블 복사 (권장)"

#: common/dialogs/dialog_global_lib_table_config.cpp:53
#, c-format
msgid ""
"Select this option if you not sure about configuring the global %s library "
"table"
msgstr ""
"전역 %s 라이브러리 테이블 구성에 대해 잘 모르는 경우 이 옵션을 선택합니다"

#: common/dialogs/dialog_global_lib_table_config.cpp:57
#, c-format
msgid "Copy custom global %s library table"
msgstr "사용자 정의 전역 %s 라이브러리 테이블 복사"

#: common/dialogs/dialog_global_lib_table_config.cpp:59
#, c-format
msgid ""
"Select this option to copy a %s library table file other than the default"
msgstr ""
"기본값이 아닌 %s 라이브러리 테이블 파일을 복사하려면 이 옵션을 선택합니다"

#: common/dialogs/dialog_global_lib_table_config.cpp:63
#, c-format
msgid "Create an empty global %s library table"
msgstr "빈 전역 %s 라이브러리 테이블 만들기"

#: common/dialogs/dialog_global_lib_table_config.cpp:65
#, c-format
msgid ""
"Select this option to define %s libraries in project specific library tables"
msgstr ""
"프로젝트 특정 라이브러리 테이블에서 %s 라이브러리를 정의하려면 이 옵션을 선택"
"하십시오"

#: common/dialogs/dialog_global_lib_table_config.cpp:69
#, c-format
msgid "Select global %s library table file:"
msgstr "전역 %s 라이브러리 테이블 파일 선택 :"

#: common/dialogs/dialog_global_lib_table_config_base.cpp:21
#: common/dialogs/dialog_global_lib_table_config_base.cpp:28
#: common/dialogs/dialog_global_lib_table_config_base.cpp:30
#: common/dialogs/dialog_global_lib_table_config_base.cpp:34
#: common/dialogs/dialog_global_lib_table_config_base.cpp:35
#: common/dialogs/dialog_global_lib_table_config_base.cpp:39
#: common/dialogs/dialog_global_lib_table_config_base.cpp:40
#: common/dialogs/dialog_global_lib_table_config_base.cpp:47
#: common/dialogs/panel_image_editor_base.cpp:44
#: gerbview/dialogs/dialog_draw_layers_settings_base.cpp:25
#: gerbview/dialogs/dialog_draw_layers_settings_base.cpp:67
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:140
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:152
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:164
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:176
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:238
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:250
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:262
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:274
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:241
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:256
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:271
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:379
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:383
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:387
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:391
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:395
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:399
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:403
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:407
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:411
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:415
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:419
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:423
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:427
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:431
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:435
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:439
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:230
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:242
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:254
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:268
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:282
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:294
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:310
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:324
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:340
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:196
msgid "dummy"
msgstr "더미"

#: common/dialogs/dialog_global_lib_table_config_base.cpp:51
msgid "Select a file"
msgstr "파일 선택"

#: common/dialogs/dialog_global_lib_table_config_base.h:55
msgid "Configure Global Library Table"
msgstr "전역 라이브러리 테이블 구성"

#: common/dialogs/dialog_grid_settings.cpp:61
msgid "Grid size X out of range."
msgstr "그리드 크기 X가 범위를 벗어남."

#: common/dialogs/dialog_grid_settings.cpp:68
msgid "Grid size Y out of range."
msgstr "그리드 크기 Y가 범위를 벗어남."

#: common/dialogs/dialog_grid_settings_base.cpp:25
#: eeschema/dialogs/dialog_export_netlist_base.cpp:96
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:32
#: eeschema/symbol_editor/symbol_editor.cpp:612
#: pcb_calculator/dialogs/dialog_regulator_form_base.cpp:27
#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager_base.cpp:31
#: pcbnew/footprint_libraries_utils.cpp:1008
msgid "Name:"
msgstr "이름:"

#: common/dialogs/dialog_grid_settings_base.cpp:32
#, fuzzy
msgid "(optional)"
msgstr "(선택사항; 기본값 0)"

#: common/dialogs/dialog_grid_settings_base.cpp:43
#: common/dialogs/dialog_grid_settings_base.cpp:66
#: common/dialogs/dialog_page_settings_base.cpp:89
#: common/dialogs/dialog_page_settings_base.cpp:110
#: common/dialogs/dialog_unit_entry_base.cpp:28
#: common/dialogs/dialog_unit_entry_base.cpp:84
#: common/dialogs/dialog_unit_entry_base.cpp:95
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:207
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:352
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:400
#: eeschema/dialogs/dialog_image_properties_base.cpp:41
#: eeschema/dialogs/dialog_image_properties_base.cpp:52
#: eeschema/dialogs/dialog_line_properties_base.cpp:39
#: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:39
#: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:80
#: pcbnew/dialogs/dialog_cleanup_graphics_base.cpp:53
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:279
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:295
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:308
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:321
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:334
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:394
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:408
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:423
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:434
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:122
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:133
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:288
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:301
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:317
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:256
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:269
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:285
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:151
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:204
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:221
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:239
#: pcbnew/dialogs/dialog_reference_image_properties_base.cpp:39
#: pcbnew/dialogs/dialog_reference_image_properties_base.cpp:50
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:39
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:50
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:65
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:76
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:99
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:110
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:125
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:136
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:161
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:191
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:202
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:244
#: pcbnew/dialogs/dialog_target_properties_base.cpp:35
#: pcbnew/dialogs/dialog_target_properties_base.cpp:46
#: pcbnew/dialogs/dialog_text_properties_base.cpp:177
#: pcbnew/dialogs/dialog_text_properties_base.cpp:190
#: pcbnew/dialogs/dialog_text_properties_base.cpp:203
#: pcbnew/dialogs/dialog_text_properties_base.cpp:216
#: pcbnew/dialogs/dialog_text_properties_base.cpp:229
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:148
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:164
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:177
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:201
#: pcbnew/dialogs/dialog_track_via_size_base.cpp:32
#: pcbnew/dialogs/dialog_track_via_size_base.cpp:43
#: pcbnew/dialogs/dialog_track_via_size_base.cpp:54
#: pcbnew/dialogs/dialog_tuning_pattern_properties_base.cpp:38
#: pcbnew/dialogs/dialog_tuning_pattern_properties_base.cpp:56
#: pcbnew/dialogs/dialog_tuning_pattern_properties_base.cpp:67
#: pcbnew/dialogs/dialog_tuning_pattern_properties_base.cpp:80
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:151
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:167
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:48
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:62
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:78
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:177
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:191
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:207
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:306
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:320
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:336
msgid "unit"
msgstr "단위"

#: common/dialogs/dialog_grid_settings_base.cpp:50
#, fuzzy
msgid "Linked"
msgstr "링크:"

#: common/dialogs/dialog_grid_settings_base.h:57
msgid "Grid Settings"
msgstr "그리드 설정"

#: common/dialogs/dialog_hotkey_list.cpp:33
msgid "Hotkey List"
msgstr "단축키 목록"

#: common/dialogs/dialog_import_choose_project.cpp:33
msgid "Project Name"
msgstr "프로젝트 이름"

#: common/dialogs/dialog_import_choose_project.cpp:34
#: kicad/cli/command_pcb.h:31 pcbnew/board.cpp:1059
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:35
msgid "PCB"
msgstr "PCB"

#: common/dialogs/dialog_import_choose_project.cpp:35
#: eeschema/sch_edit_frame.cpp:1248 eeschema/sch_plotter.cpp:1009
#: eeschema/widgets/symbol_diff_widget.cpp:38
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:36
msgid "Schematic"
msgstr "회로도"

#: common/dialogs/dialog_import_choose_project_base.cpp:18
msgid ""
"This project file contains multiple PCB+Schematic combinations.\n"
"Choose which one should be imported to KiCad."
msgstr ""
"이 프로젝트 파일에는 여러 PCB+회로도 조합이 포함되어 있습니다.\n"
"KiCad로 가져올 항목을 선택하세요."

#: common/dialogs/dialog_import_choose_project_base.h:48
msgid "Choose Project to Import"
msgstr "불러올 프로젝트 선택"

#: common/dialogs/dialog_locked_items_query.cpp:35
msgid "Skip Locked Items"
msgstr "잠긴 항목 건너뛰기"

#: common/dialogs/dialog_locked_items_query.cpp:36
msgid ""
"Remove locked items from the selection and only apply the operation to the "
"unlocked items (if any)."
msgstr ""
"선택 항목에서 잠긴 항목을 제거하고 잠금 해제 된 항목 (있는 경우) 에만 작업을 "
"적용합니다."

#: common/dialogs/dialog_locked_items_query_base.cpp:30
#, c-format
msgid "The selection contains %d locked items."
msgstr "선택 항목에 %d개의 잠긴 항목이 있음."

#: common/dialogs/dialog_locked_items_query_base.cpp:34
msgid "These items will be skipped unless you override the locks."
msgstr "잠금을 무시하지 않는 한 이러한 항목은 건너뜁니다."

#: common/dialogs/dialog_locked_items_query_base.cpp:44
msgid "Remember decision for this session."
msgstr "이 세션에 대한 결정을 기억함."

#: common/dialogs/dialog_locked_items_query_base.cpp:45
msgid ""
"Remember the option selected for the remainder of this session.\n"
"This dialog will not be shown again until KiCad is restarted."
msgstr ""
"이 세션의 나머지 부분에 대해 선택한 옵션을 기억하십시오.\n"
"이 대화 상자는 KiCad를 다시 시작할 때까지 다시 표시되지 않습니다."

#: common/dialogs/dialog_locked_items_query_base.cpp:55
msgid "Override Locks"
msgstr "잠금 무시"

#: common/dialogs/dialog_locked_items_query_base.cpp:56
#: kicad/dialogs/dialog_update_notice_base.cpp:53
msgid ""
"Override locks and apply the operation on all the items selected.\n"
"Any locked items will remain locked after the operation is complete."
msgstr ""
"잠금을 무시하고 선택한 모든 항목에 작업을 적용합니다.\n"
"잠긴 항목은 작업이 완료된 후에도 잠긴 상태로 유지됩니다."

#: common/dialogs/dialog_locked_items_query_base.h:56
msgid "Locked Items"
msgstr "잠긴 항목"

#: common/dialogs/dialog_migrate_settings.cpp:33
msgid "Quit KiCad"
msgstr "KiCad 종료"

#: common/dialogs/dialog_migrate_settings.cpp:58
#: common/dialogs/dialog_migrate_settings_base.cpp:23
#, c-format
msgid "Welcome to KiCad %s!"
msgstr "KiCad %s에 오신 것을 환영합니다!"

#: common/dialogs/dialog_migrate_settings.cpp:67
msgid "Import settings from a previous version (none found)"
msgstr "이전 버전에서 설정을 가져오기 (찾을 수 없음)"

#: common/dialogs/dialog_migrate_settings.cpp:138
msgid "Select Settings Path"
msgstr "설정 경로 선택"

#: common/dialogs/dialog_migrate_settings_base.cpp:32
msgid "How would you like to configure KiCad?"
msgstr "KiCad를 어떻게 구성하시겠습니까?"

#: common/dialogs/dialog_migrate_settings_base.cpp:36
msgid "Import settings from a previous version at:"
msgstr "다음 위치에서 이전 버전의 설정 가져오기:"

#: common/dialogs/dialog_migrate_settings_base.cpp:49
msgid "Choose a different path"
msgstr "다른 경로 선택"

#: common/dialogs/dialog_migrate_settings_base.cpp:56
msgid "The selected path does not contain valid KiCad settings!"
msgstr "선택한 경로에 유효한 KiCad 설정이 없습니다!"

#: common/dialogs/dialog_migrate_settings_base.cpp:63
msgid "Import library configuration from previous version"
msgstr "이전 버전에서 라이브러리 구성 가져오기"

#: common/dialogs/dialog_migrate_settings_base.cpp:65
msgid ""
"When checked, the symbol and footprint library tables from the previous "
"version will be imported into this version"
msgstr ""
"선택하면 이전 버전의 심볼 및 풋프린트 라이브러리 테이블을 이 버전으로 가져옵"
"니다"

#: common/dialogs/dialog_migrate_settings_base.cpp:69
msgid "Start with default settings"
msgstr "기본 설정으로 시작"

#: common/dialogs/dialog_migrate_settings_base.h:67
msgid "Configure KiCad Settings Path"
msgstr "KiCad 설정 경로 구성"

#: common/dialogs/dialog_page_settings.cpp:59
msgid "A5 148x210mm"
msgstr "A5 148x210mm"

#: common/dialogs/dialog_page_settings.cpp:60
msgid "A4 210x297mm"
msgstr "A4 210x297mm"

#: common/dialogs/dialog_page_settings.cpp:61
msgid "A3 297x420mm"
msgstr "A3 297x420mm"

#: common/dialogs/dialog_page_settings.cpp:62
msgid "A2 420x594mm"
msgstr "A2 420x594mm"

#: common/dialogs/dialog_page_settings.cpp:63
msgid "A1 594x841mm"
msgstr "A1 594x841mm"

#: common/dialogs/dialog_page_settings.cpp:64
msgid "A0 841x1189mm"
msgstr "A0 841x1189mm"

#: common/dialogs/dialog_page_settings.cpp:65
msgid "A 8.5x11in"
msgstr "A 8.5x11in"

#: common/dialogs/dialog_page_settings.cpp:66
msgid "B 11x17in"
msgstr "B 11x17in"

#: common/dialogs/dialog_page_settings.cpp:67
msgid "C 17x22in"
msgstr "C 17x22in"

#: common/dialogs/dialog_page_settings.cpp:68
msgid "D 22x34in"
msgstr "D 22x34in"

#: common/dialogs/dialog_page_settings.cpp:69
msgid "E 34x44in"
msgstr "E 34x44in"

#: common/dialogs/dialog_page_settings.cpp:70
msgid "USLetter 8.5x11in"
msgstr "USLetter 8.5x11in"

#: common/dialogs/dialog_page_settings.cpp:71
msgid "USLegal 8.5x14in"
msgstr "USLegal 8.5x14in"

#: common/dialogs/dialog_page_settings.cpp:72
msgid "USLedger 11x17in"
msgstr "USLedger 11x17in"

#: common/dialogs/dialog_page_settings.cpp:73
msgid "User (Custom)"
msgstr "사용자 (사용자 정의)"

#: common/dialogs/dialog_page_settings.cpp:105
msgid "Preview Settings"
msgstr "미리보기 설정"

#: common/dialogs/dialog_page_settings.cpp:106
msgid "Preview Paper"
msgstr "미리 보기 용지"

#: common/dialogs/dialog_page_settings.cpp:107
msgid "Preview Title Block Data"
msgstr "제목 블록 데이터 미리 보기"

#: common/dialogs/dialog_page_settings.cpp:111
#: common/dialogs/dialog_page_settings_base.h:146
#: eeschema/tools/sch_editor_control.cpp:184
#: pcbnew/tools/board_editor_control.cpp:296
msgid "Page Settings"
msgstr "페이지 설정"

#: common/dialogs/dialog_page_settings.cpp:112
#: common/dialogs/dialog_page_settings_base.cpp:27
msgid "Paper"
msgstr "종이"

#: common/dialogs/dialog_page_settings.cpp:113
msgid "Title Block"
msgstr "제목 칸"

#: common/dialogs/dialog_page_settings.cpp:474
#, c-format
msgid "Drawing sheet file '%s' not found."
msgstr "도면 시트 파일 '%s'을(를) 찾을 수 없습니다."

#: common/dialogs/dialog_page_settings.cpp:707
#: common/dialogs/dialog_page_settings_base.cpp:54
msgid "Portrait"
msgstr "세로"

#: common/dialogs/dialog_page_settings.cpp:709
#: common/dialogs/dialog_page_settings_base.cpp:54
msgid "Landscape"
msgstr "가로"

#: common/dialogs/dialog_page_settings.cpp:795 pagelayout_editor/files.cpp:59
msgid "Drawing Sheet File"
msgstr "도면 시트 파일"

#: common/dialogs/dialog_page_settings_base.cpp:41
msgid "dummy text"
msgstr "더미 텍스트"

#: common/dialogs/dialog_page_settings_base.cpp:50
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:238
#: eeschema/dialogs/dialog_label_properties.cpp:171
#: eeschema/dialogs/dialog_pin_properties_base.cpp:113
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:296
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:338
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:137
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:138
#: pcbnew/dialogs/dialog_text_properties_base.cpp:233
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:181
msgid "Orientation:"
msgstr "방향:"

#: common/dialogs/dialog_page_settings_base.cpp:60
msgid "Custom paper size:"
msgstr "사용자 정의 용지 크기:"

#: common/dialogs/dialog_page_settings_base.cpp:72
#: pcbnew/dialogs/dialog_board_statistics.cpp:105
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:299
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:184
#: pcbnew/dialogs/dialog_text_properties_base.cpp:181
msgid "Height:"
msgstr "높이:"

#: common/dialogs/dialog_page_settings_base.cpp:85
msgid "Custom paper height."
msgstr "사용자 정의 용지 높이."

#: common/dialogs/dialog_page_settings_base.cpp:93
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:51
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:210
#: eeschema/dialogs/dialog_line_properties_base.cpp:30
#: eeschema/dialogs/dialog_shape_properties_base.cpp:42
#: eeschema/dialogs/dialog_text_properties_base.cpp:220
#: pcbnew/dialogs/dialog_board_statistics.cpp:103
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:270
#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions_base.cpp:25
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:195
#: pcbnew/dialogs/dialog_text_properties_base.cpp:168
msgid "Width:"
msgstr "너비:"

#: common/dialogs/dialog_page_settings_base.cpp:106
msgid "Custom paper width."
msgstr "사용자 정의 용지 너비."

#: common/dialogs/dialog_page_settings_base.cpp:117
#: common/dialogs/dialog_page_settings_base.cpp:237
#: common/dialogs/dialog_page_settings_base.cpp:249
#: common/dialogs/dialog_page_settings_base.cpp:261
#: common/dialogs/dialog_page_settings_base.cpp:273
#: common/dialogs/dialog_page_settings_base.cpp:285
#: common/dialogs/dialog_page_settings_base.cpp:297
#: common/dialogs/dialog_page_settings_base.cpp:309
#: common/dialogs/dialog_page_settings_base.cpp:321
#: common/dialogs/dialog_page_settings_base.cpp:333
#: common/dialogs/dialog_page_settings_base.cpp:345
#: common/dialogs/dialog_page_settings_base.cpp:357
#: common/dialogs/dialog_page_settings_base.cpp:369
#: common/dialogs/dialog_page_settings_base.cpp:381
msgid "Export to other sheets"
msgstr "다른 시트로 내보내기"

#: common/dialogs/dialog_page_settings_base.cpp:148 common/rc_item.cpp:430
#: eeschema/erc_item.cpp:353
#: gerbview/dialogs/panel_gerbview_color_settings.cpp:104
#: gerbview/widgets/gerbview_layer_widget.cpp:136 pcbnew/pcb_marker.cpp:214
#: pcbnew/widgets/appearance_controls.cpp:349
msgid "Drawing Sheet"
msgstr "도면 시트"

#: common/dialogs/dialog_page_settings_base.cpp:164
#: eeschema/dialogs/dialog_sim_model_base.cpp:38
#: eeschema/import_gfx/dialog_import_gfx_sch_base.cpp:24
#: eeschema/sch_field.cpp:258 pcbnew/dialogs/dialog_export_2581_base.cpp:23
#: pcbnew/dialogs/dialog_export_step_base.cpp:23
#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:25
msgid "File:"
msgstr "파일:"

#: common/dialogs/dialog_page_settings_base.cpp:183
msgid "Title Block Parameters"
msgstr "제목 블록 매개변수"

#: common/dialogs/dialog_page_settings_base.cpp:196
#, c-format
msgid "Number of sheets: %d"
msgstr "시트 수: %d"

#: common/dialogs/dialog_page_settings_base.cpp:203
#, c-format
msgid "Sheet number: %d"
msgstr "시트 번호: %d"

#: common/dialogs/dialog_page_settings_base.cpp:216
msgid "Issue Date:"
msgstr "발행일:"

#: common/dialogs/dialog_page_settings_base.cpp:228
msgid "<<<"
msgstr "<<<"

#: common/dialogs/dialog_page_settings_base.cpp:240
msgid "Revision:"
msgstr "개정:"

#: common/dialogs/dialog_page_settings_base.cpp:252
#: eeschema/dialogs/dialog_export_netlist.cpp:391
msgid "Title:"
msgstr "제목:"

#: common/dialogs/dialog_page_settings_base.cpp:264
msgid "Company:"
msgstr "회사:"

#: common/dialogs/dialog_page_settings_base.cpp:276
msgid "Comment1:"
msgstr "주석1:"

#: common/dialogs/dialog_page_settings_base.cpp:288
msgid "Comment2:"
msgstr "주석2:"

#: common/dialogs/dialog_page_settings_base.cpp:300
msgid "Comment3:"
msgstr "주석3:"

#: common/dialogs/dialog_page_settings_base.cpp:312
msgid "Comment4:"
msgstr "주석4:"

#: common/dialogs/dialog_page_settings_base.cpp:324
msgid "Comment5:"
msgstr "주석5:"

#: common/dialogs/dialog_page_settings_base.cpp:336
msgid "Comment6:"
msgstr "주석6:"

#: common/dialogs/dialog_page_settings_base.cpp:348
msgid "Comment7:"
msgstr "주석7:"

#: common/dialogs/dialog_page_settings_base.cpp:360
msgid "Comment8:"
msgstr "주석8:"

#: common/dialogs/dialog_page_settings_base.cpp:372
msgid "Comment9:"
msgstr "주석9:"

#: common/dialogs/dialog_paste_special.cpp:37
msgid ""
"Finds the next available reference designator for any designators that "
"already exist in the design."
msgstr ""
"설계에 이미 존재하는 모든 지정자에 대해 다음 사용 가능한 참조 지정자를 찾습니"
"다."

#: common/dialogs/dialog_paste_special.cpp:44
#, c-format
msgid "Replaces reference designators with '%s'."
msgstr "참조 지정자를 '%s'(으)로 바꿉니다."

#: common/dialogs/dialog_paste_special_base.cpp:22
msgid "Assign unique reference designators to pasted symbols"
msgstr "붙여넣은 심볼에 고유 참조 지정자 할당"

#: common/dialogs/dialog_paste_special_base.cpp:22
msgid "Keep existing reference designators, even if they are duplicated"
msgstr "중복된 경우에도 기존 참조 지정자를 유지함"

#: common/dialogs/dialog_paste_special_base.cpp:22
msgid "Clear reference designators on all pasted symbols"
msgstr "붙여넣은 모든 심볼의 참조 지정자 지우기"

#: common/dialogs/dialog_paste_special_base.cpp:24
msgid "Paste Options"
msgstr "붙여넣기 옵션"

#: common/dialogs/dialog_paste_special_base.h:46
msgid "Paste Special"
msgstr "붙여넣기 스페셜"

#: common/dialogs/dialog_plugin_options.cpp:37
msgid ""
"Select an <b>Option Choice</b> in the listbox above, and then click the "
"<b>Append Selected Option</b> button."
msgstr ""
"위의 리스트 박스에서 <b>옵션 선택지</b>를 고른 뒤, <b>선택한 옵션 추가</b>버"
"튼을 누릅니다."

#: common/dialogs/dialog_plugin_options.cpp:52
#, c-format
msgid "Options for Library '%s'"
msgstr "라이브러리 '%s' 에 대한 옵션"

#: common/dialogs/dialog_plugin_options_base.cpp:26
msgid "Plugin Options"
msgstr "플러그인 옵션"

#: common/dialogs/dialog_plugin_options_base.cpp:43
#: common/dialogs/panel_mouse_settings.cpp:47
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:228
#: pcbnew/dialogs/panel_edit_options_base.cpp:236
msgid "Option"
msgstr "옵션"

#: common/dialogs/dialog_plugin_options_base.cpp:44
#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:89
#: eeschema/dialogs/dialog_label_properties_base.cpp:88
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:60
#: eeschema/dialogs/dialog_rescue_each.cpp:135
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:61
#: eeschema/dialogs/dialog_sim_format_value.cpp:66
#: eeschema/dialogs/dialog_sim_format_value.cpp:75
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:57
#: eeschema/dialogs/panel_sym_lib_table.cpp:368
#: eeschema/fields_grid_table.cpp:344 eeschema/sch_symbol.cpp:1907
#: eeschema/sch_symbol.cpp:1957 eeschema/sch_symbol.cpp:2714
#: eeschema/sim/simulator_frame_ui.cpp:598
#: eeschema/sim/simulator_frame_ui.cpp:2554
#: eeschema/sim/simulator_frame_ui_base.cpp:170
#: eeschema/sim/simulator_frame_ui_base.cpp:222
#: eeschema/widgets/search_handlers.cpp:131
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:70
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:70
#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:55
#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:67
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:48
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:57
#: pcbnew/dialogs/panel_fp_lib_table.cpp:413 pcbnew/footprint.cpp:3497
#: pcbnew/footprint_wizard_frame.cpp:326 pcbnew/fp_text_grid_table.cpp:138
#: pcbnew/pcb_dimension.cpp:406 pcbnew/plot_board_layers.cpp:90
#: pcbnew/widgets/search_handlers.cpp:83
msgid "Value"
msgstr "값"

#: common/dialogs/dialog_plugin_options_base.cpp:78
msgid "Option Choices"
msgstr "옵션 선택지"

#: common/dialogs/dialog_plugin_options_base.cpp:81
msgid "Options supported by current plugin"
msgstr "현재 플러그인에 의해 지원되는 옵션"

#: common/dialogs/dialog_plugin_options_base.cpp:85
msgid "<<    Append Selected Option"
msgstr "<<    선택한 옵션 추가"

#: common/dialogs/dialog_print_generic.cpp:95
#: common/dialogs/dialog_print_generic.cpp:301
#: common/dialogs/dialog_print_generic_base.h:77 common/tool/actions.cpp:123
#: eeschema/printing/dialog_print_using_printer.cpp:126
#: eeschema/printing/dialog_print_using_printer_base.h:61
msgid "Print"
msgstr "인쇄"

#: common/dialogs/dialog_print_generic.cpp:96
#: common/dialogs/dialog_print_generic.cpp:247
#: eeschema/printing/dialog_print_using_printer.cpp:127
msgid "Print Preview"
msgstr "인쇄 미리보기"

#: common/dialogs/dialog_print_generic.cpp:97 common/hotkey_store.cpp:55
#: common/tool/action_menu.cpp:211 common/tool/action_menu.cpp:216
#: eeschema/dialogs/dialog_annotate.cpp:93 eeschema/dialogs/dialog_bom.cpp:136
#: eeschema/dialogs/dialog_change_symbols.cpp:157
#: eeschema/dialogs/dialog_erc.cpp:107 eeschema/dialogs/dialog_erc.cpp:446
#: eeschema/dialogs/dialog_export_netlist.cpp:275
#: eeschema/dialogs/dialog_ibis_parser_reporter.cpp:36
#: eeschema/dialogs/dialog_plot_schematic.cpp:76
#: eeschema/dialogs/dialog_schematic_find_base.cpp:133
#: eeschema/dialogs/dialog_symbol_remap_base.cpp:33
#: eeschema/dialogs/dialog_update_from_pcb.cpp:68
#: eeschema/printing/dialog_print_using_printer.cpp:128
#: kicad/pcm/dialogs/dialog_pcm.cpp:164
#: kicad/pcm/dialogs/dialog_pcm_progress_base.cpp:72
#: pcbnew/dialogs/dialog_board_reannotate.cpp:123
#: pcbnew/dialogs/dialog_board_statistics.cpp:136
#: pcbnew/dialogs/dialog_drc.cpp:126 pcbnew/dialogs/dialog_drc.cpp:331
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:157
#: pcbnew/dialogs/dialog_export_2581.cpp:46
#: pcbnew/dialogs/dialog_export_step.cpp:141
#: pcbnew/dialogs/dialog_export_svg.cpp:89
#: pcbnew/dialogs/dialog_find_base.cpp:102
#: pcbnew/dialogs/dialog_footprint_checker.cpp:62
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:63
#: pcbnew/dialogs/dialog_gendrill.cpp:78
#: pcbnew/dialogs/dialog_import_netlist.cpp:82
#: pcbnew/dialogs/dialog_net_inspector.cpp:1127
#: pcbnew/dialogs/dialog_plot.cpp:190 pcbnew/dialogs/dialog_update_pcb.cpp:60
msgid "Close"
msgstr "닫기"

#: common/dialogs/dialog_print_generic.cpp:155
msgid "Warning: Bad scale number"
msgstr "경고: 잘못된 배율 숫자"

#: common/dialogs/dialog_print_generic.cpp:164
#, c-format
msgid ""
"Warning: Scale option set to a very large value.\n"
" Clamped to %f"
msgstr ""
"경고: 배율 옵션이 매우 큰 값으로 설정됩니다.\n"
" %f에 고정됨"

#: common/dialogs/dialog_print_generic.cpp:172
#, c-format
msgid ""
"Warning: Scale option set to a very small value.\n"
" Clamped to %f"
msgstr ""
"경고: 배율 옵션이 매우 작은 값으로 설정됩니다.\n"
" %f에 고정됨"

#: common/dialogs/dialog_print_generic.cpp:242
#: common/dialogs/dialog_print_generic.cpp:293
msgid "Nothing to print"
msgstr "인쇄할 항목 없음"

#: common/dialogs/dialog_print_generic.cpp:284
#: eeschema/printing/dialog_print_using_printer.cpp:307
msgid "Previous print job not yet complete."
msgstr "이전 인쇄 작업이 아직 완료되지 않았습니다."

#: common/dialogs/dialog_print_generic.cpp:309
msgid "There was a problem printing."
msgstr "인쇄하는데 문제가 있습니다."

#: common/dialogs/dialog_print_generic.cpp:351
msgid "An error occurred initializing the printer information."
msgstr "프린터 정보를 초기화하는 동안 오류가 발생했습니다."

#: common/dialogs/dialog_print_generic_base.cpp:31
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:74
#: eeschema/printing/dialog_print_using_printer_base.cpp:31
#: pcbnew/dialogs/dialog_plot_base.cpp:377
#: pcbnew/dialogs/dialog_plot_base.cpp:400
msgid "Output mode:"
msgstr "출력 모드:"

#: common/dialogs/dialog_print_generic_base.cpp:35
#: common/dialogs/panel_setup_netclasses_base.cpp:62 common/eda_text.cpp:1228
#: eeschema/dialogs/dialog_label_properties_base.cpp:100
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:72
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:78
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:72
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:69
#: eeschema/fields_grid_table.cpp:356
#: eeschema/printing/dialog_print_using_printer_base.cpp:35
#: eeschema/sch_bus_entry.cpp:657 eeschema/sch_junction.cpp:368
#: eeschema/sch_line.cpp:1076 eeschema/sim/simulator_frame_ui.cpp:591
#: eeschema/sim/simulator_frame_ui_base.cpp:113
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:98
#: pcbnew/dialogs/dialog_export_svg_base.cpp:81
#: pcbnew/dialogs/dialog_plot_base.cpp:381
#: pcbnew/dialogs/dialog_plot_base.cpp:404 pcbnew/pcb_text.cpp:563
#: pcbnew/pcb_textbox.cpp:677 pcbnew/tools/drawing_stackup_table_tool.cpp:270
msgid "Color"
msgstr "컬러"

#: common/dialogs/dialog_print_generic_base.cpp:35
#: pcbnew/dialogs/dialog_export_svg_base.cpp:81
#: pcbnew/dialogs/dialog_plot_base.cpp:381
#: pcbnew/dialogs/dialog_plot_base.cpp:404
msgid "Black and white"
msgstr "흑백"

#: common/dialogs/dialog_print_generic_base.cpp:41
#: eeschema/printing/dialog_print_using_printer_base.cpp:22
msgid "Print drawing sheet"
msgstr "도면 시트 인쇄"

#: common/dialogs/dialog_print_generic_base.cpp:43
msgid "Print Frame references."
msgstr "프레임 참조를 인쇄합니다."

#: common/dialogs/dialog_print_generic_base.cpp:58
#: pcbnew/dialogs/dialog_plot_base.cpp:124
msgid "1:1"
msgstr "1:1"

#: common/dialogs/dialog_print_generic_base.cpp:64
msgid "Fit to page"
msgstr "페이지에 맞추기"

#: common/dialogs/dialog_print_generic_base.cpp:73
msgid "Custom:"
msgstr "사용자 정의:"

#: common/dialogs/dialog_print_generic_base.cpp:77
msgid "Set X scale adjust for exact scale plotting"
msgstr "정밀 스케일 플롯용 X 스케일 설정"

#: common/dialogs/dialog_print_generic_base.cpp:96
msgid "Info text"
msgstr "정보 텍스트"

#: common/dialogs/dialog_print_generic_base.cpp:108
#: eeschema/printing/dialog_print_using_printer_base.cpp:73
msgid "Page Setup..."
msgstr "페이지 설정..."

#: common/dialogs/dialog_text_entry_base.cpp:21
#: common/dialogs/dialog_text_entry_base.cpp:33
#: common/dialogs/dialog_unit_entry_base.cpp:21
msgid "MyLabel"
msgstr "마이라벨"

#: common/dialogs/dialog_unit_entry_base.cpp:77
msgid "X label:"
msgstr "X 라벨:"

#: common/dialogs/dialog_unit_entry_base.cpp:88
msgid "Y label:"
msgstr "Y 라벨:"

#: common/dialogs/dialog_unit_entry_base.h:46
msgid "Title"
msgstr "제목"

#: common/dialogs/dialog_unit_entry_base.h:73
msgid "Move Point to Location"
msgstr "위치로 포인트 이동"

#: common/dialogs/eda_list_dialog.cpp:46 common/dialogs/eda_list_dialog.cpp:68
#: common/widgets/lib_tree.cpp:197 common/widgets/lib_tree.cpp:265
#: eeschema/dialogs/dialog_sim_command.cpp:96
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:212
#: eeschema/sim/simulator_frame_ui.cpp:504
#: eeschema/sim/simulator_frame_ui.cpp:587 eeschema/symbol_diff_frame.cpp:101
#: eeschema/symbol_viewer_frame.cpp:153 eeschema/symbol_viewer_frame.cpp:168
#: kicad/pcm/dialogs/panel_packages_view.cpp:77
#: pcbnew/dialogs/dialog_copper_zones.cpp:244
#: pcbnew/footprint_viewer_frame.cpp:141 pcbnew/footprint_viewer_frame.cpp:156
msgid "Filter"
msgstr "필터"

#: common/dialogs/eda_list_dialog_base.cpp:22
msgid "Items:"
msgstr "항목:"

#: common/dialogs/eda_reorderable_list_dialog_base.cpp:32
msgid "Available:"
msgstr "사용 가능:"

#: common/dialogs/eda_reorderable_list_dialog_base.cpp:39
msgid "Enabled:"
msgstr "활성화됨:"

#: common/dialogs/eda_reorderable_list_dialog_base.cpp:51
#: pcbnew/dialogs/dialog_imported_layers_base.cpp:59
msgid ">"
msgstr ">"

#: common/dialogs/eda_reorderable_list_dialog_base.cpp:54
#: pcbnew/dialogs/dialog_imported_layers_base.cpp:64
msgid "<"
msgstr "<"

#: common/dialogs/eda_reorderable_list_dialog_base.cpp:75
#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:43
#: eeschema/dialogs/dialog_label_properties_base.cpp:126
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:97
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:98
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:95
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:139
#: kicad/pcm/dialogs/dialog_manage_repositories_base.cpp:64
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:136
msgid "Move up"
msgstr "위로 이동"

#: common/dialogs/eda_reorderable_list_dialog_base.cpp:80
#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:48
#: eeschema/dialogs/dialog_label_properties_base.cpp:131
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:102
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:103
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:100
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:144
#: kicad/pcm/dialogs/dialog_manage_repositories_base.cpp:69
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:141
msgid "Move down"
msgstr "아래로 이동"

#: common/dialogs/eda_view_switcher_base.cpp:19
#: common/dialogs/eda_view_switcher_base.h:40
msgid "View Preset Switcher"
msgstr "사전 설정 스위처 보기"

#: common/dialogs/git/dialog_git_auth.cpp:27
#: common/dialogs/git/dialog_git_repository_base.cpp:19
#: eeschema/dialogs/dialog_database_lib_settings_base.cpp:32
msgid "Connection"
msgstr "연결"

#: common/dialogs/git/dialog_git_auth.cpp:45
#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:170
msgid "Basic"
msgstr "기본"

#: common/dialogs/git/dialog_git_auth.cpp:46
#: common/dialogs/git/dialog_git_repository_base.cpp:53
msgid "SSH"
msgstr "SSH"

#: common/dialogs/git/dialog_git_auth.cpp:52
#: common/dialogs/git/dialog_git_repository_base.cpp:107
#: eeschema/dialogs/dialog_database_lib_settings_base.cpp:85
msgid "Test"
msgstr "테스트"

#: common/dialogs/git/dialog_git_auth.cpp:58
msgid "Url"
msgstr "Url"

#: common/dialogs/git/dialog_git_auth.cpp:60
#: common/dialogs/git/dialog_git_repository_base.cpp:78
msgid "Authentication"
msgstr "인증"

#: common/dialogs/git/dialog_git_auth.cpp:62
msgid "User Name"
msgstr "사용자 이름"

#: common/dialogs/git/dialog_git_auth.cpp:64
#: common/dialogs/git/dialog_git_repository.cpp:440
msgid "Password"
msgstr "비밀번호"

#: common/dialogs/git/dialog_git_commit.cpp:41
msgid "Commit Changes"
msgstr "번경사항 커밋"

#: common/dialogs/git/dialog_git_commit.cpp:52
msgid "Filename"
msgstr "파일 이름"

#: common/dialogs/git/dialog_git_commit.cpp:53
#: common/dialogs/git/panel_git_repos_base.cpp:100
#: eeschema/dialogs/dialog_migrate_buses.cpp:116
#: kicad/pcm/dialogs/panel_packages_view_base.cpp:94
#: pcbnew/dialogs/dialog_find_base.cpp:118 pcbnew/pad.cpp:999
#: pcbnew/pcb_dimension.cpp:460 pcbnew/pcb_group.cpp:386
#: pcbnew/pcb_shape.cpp:474 pcbnew/pcb_text.cpp:232 pcbnew/pcb_textbox.cpp:361
#: pcbnew/pcb_track.cpp:1181 pcbnew/zone.cpp:591
msgid "Status"
msgstr "상태"

#: common/dialogs/git/dialog_git_commit.cpp:83
msgid "New"
msgstr "신규"

#: common/dialogs/git/dialog_git_commit.cpp:89
msgid "Modified"
msgstr "수정됨"

#: common/dialogs/git/dialog_git_commit.cpp:95
msgid "Deleted"
msgstr "삭제됨"

#: common/dialogs/git/dialog_git_commit.cpp:108
msgid "Commit Message:"
msgstr "커밋 메시지:"

#: common/dialogs/git/dialog_git_commit.cpp:115
msgid "Author:"
msgstr "제작자:"

#: common/dialogs/git/dialog_git_commit.cpp:136
msgid "C&ommit"
msgstr "커밋(&o)"

#: common/dialogs/git/dialog_git_commit.cpp:153
msgid "Commit message cannot be empty"
msgstr "커밋 메시지는 비워둘 수 없음"

#: common/dialogs/git/dialog_git_repository.cpp:146
#: common/dialogs/git/dialog_git_repository.cpp:373
msgid "Enter the password for the SSH key"
msgstr "SSH 키 암호를 입력"

#: common/dialogs/git/dialog_git_repository.cpp:325
msgid "Test connection"
msgstr "연결 테스트"

#: common/dialogs/git/dialog_git_repository.cpp:329
msgid "Connection successful"
msgstr "연결 성공"

#: common/dialogs/git/dialog_git_repository.cpp:333
#, c-format
msgid "Could not connect to '%s' "
msgstr "'%s'에 연결할 수 없음 "

#: common/dialogs/git/dialog_git_repository.cpp:352
#, c-format
msgid "Could not open private key '%s'"
msgstr "개인 키 '%s'을(를) 열 수 없음"

#: common/dialogs/git/dialog_git_repository.cpp:365
msgid "Invalid SSH Key"
msgstr "유효하지 않은 SSH 키"

#: common/dialogs/git/dialog_git_repository.cpp:365
msgid "The selected file is not a valid SSH private key"
msgstr "선택한 파일은 유효한 SSH 개인 키가 아님"

#: common/dialogs/git/dialog_git_repository.cpp:389
#, c-format
msgid "Could not open public key '%s'"
msgstr "공개 키 '%s'를 열 수 없음"

#: common/dialogs/git/dialog_git_repository.cpp:407
#: common/dialogs/git/dialog_git_repository.cpp:413
msgid "Missing information"
msgstr "정보 누락"

#: common/dialogs/git/dialog_git_repository.cpp:407
msgid "Please enter a name for the repository"
msgstr "저장소의 이름을 입력하세요"

#: common/dialogs/git/dialog_git_repository.cpp:413
msgid "Please enter a URL for the repository"
msgstr "저장소의 URL을 입력하세요"

#: common/dialogs/git/dialog_git_repository.cpp:434
#: common/dialogs/git/dialog_git_repository_base.cpp:120
msgid "SSH Key Password"
msgstr "SSH 키 비밀번호"

#: common/dialogs/git/dialog_git_repository_base.cpp:39
msgid "Location"
msgstr "위치"

#: common/dialogs/git/dialog_git_repository_base.cpp:46
msgid "Connection Type"
msgstr "연결 유형"

#: common/dialogs/git/dialog_git_repository_base.cpp:53
msgid "HTTPS"
msgstr "HTTPS"

#: common/dialogs/git/dialog_git_repository_base.cpp:53
#: eeschema/widgets/search_handlers.cpp:351
msgid "Local"
msgstr "로컬"

#: common/dialogs/git/dialog_git_repository_base.cpp:97
msgid "SSH Private Key"
msgstr "SSH 개인 키"

#: common/dialogs/git/dialog_git_repository_base.cpp:104
msgid "Select SSH private key file"
msgstr "SSH 개인 키 파일 선택"

#: common/dialogs/git/dialog_git_repository_base.cpp:104
msgid "*"
msgstr "*"

#: common/dialogs/git/dialog_git_repository_base.cpp:113
msgid "Username"
msgstr "사용자 이름"

#: common/dialogs/git/dialog_git_repository_base.h:77
msgid "Git Repository"
msgstr "Git 저장소"

#: common/dialogs/git/dialog_git_switch.cpp:39
msgid "Git Branch Switch"
msgstr "Git 분기 스위치"

#: common/dialogs/git/dialog_git_switch.cpp:47
msgid "Select or enter a branch name:"
msgstr "분기 이름을 선택하거나 입력:"

#: common/dialogs/git/dialog_git_switch.cpp:53
msgid "Branch"
msgstr "브랜치"

#: common/dialogs/git/dialog_git_switch.cpp:54
msgid "Last Commit"
msgstr "마지막 커밋"

#: common/dialogs/git/dialog_git_switch.cpp:55
msgid "Last Updated"
msgstr "최종 업데이트"

#: common/dialogs/git/dialog_git_switch.cpp:65
#: common/dialogs/git/dialog_git_switch.cpp:146
#: common/dialogs/git/dialog_git_switch.cpp:213
msgid "Switch"
msgstr "스위치"

#: common/dialogs/git/dialog_git_switch.cpp:218 eeschema/sch_base_frame.cpp:285
#: pcbnew/footprint_libraries_utils.cpp:430
msgid "Add"
msgstr "추가"

#: common/dialogs/git/panel_git_repos_base.cpp:23
msgid "Git Commit Data"
msgstr "Git 커밋 데이터"

#: common/dialogs/git/panel_git_repos_base.cpp:33
msgid "Use default values"
msgstr "기본값 사용"

#: common/dialogs/git/panel_git_repos_base.cpp:40
msgid "Author name:"
msgstr "작성자 이름:"

#: common/dialogs/git/panel_git_repos_base.cpp:51
msgid "Author e-mail:"
msgstr "제작자 이메일:"

#: common/dialogs/git/panel_git_repos_base.cpp:68
msgid "Git Repositories"
msgstr "Git 저장소"

#: common/dialogs/git/panel_git_repos_base.cpp:97
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:44
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:94
#: include/lib_table_grid.h:197 pcbnew/dialogs/panel_fp_lib_table_base.cpp:44
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:93
msgid "Active"
msgstr "활성"

#: common/dialogs/git/panel_git_repos_base.cpp:122
msgid "Add new repository"
msgstr "새 저장소 추가"

#: common/dialogs/git/panel_git_repos_base.cpp:127
msgid "Edit repository properties"
msgstr "저장소 속성 편집"

#: common/dialogs/git/panel_git_repos_base.cpp:135
msgid "Remove Git Repository"
msgstr "Git 저장소 제거"

#: common/dialogs/panel_color_settings.cpp:50
msgid "Reveal Themes in Finder"
msgstr "파인더에서 테마 공개"

#: common/dialogs/panel_color_settings.cpp:134
msgid "New theme name:"
msgstr "새 테마 이름:"

#: common/dialogs/panel_color_settings.cpp:135
msgid "Add Color Theme"
msgstr "색상 테마 추가"

#: common/dialogs/panel_color_settings.cpp:147
msgid "Theme already exists!"
msgstr "테마가 이미 있습니다!"

#: common/dialogs/panel_color_settings.cpp:217
#: common/dialogs/panel_color_settings.cpp:236
msgid "New Theme..."
msgstr "새 테마..."

#: common/dialogs/panel_color_settings.cpp:298
msgid "Copy color"
msgstr "색상 복사"

#: common/dialogs/panel_color_settings.cpp:301
msgid "Paste color"
msgstr "색상 붙여넣기"

#: common/dialogs/panel_color_settings.cpp:304
msgid "Revert to saved color"
msgstr "저장된 색상으로 되돌리기"

#: common/dialogs/panel_color_settings.cpp:392
msgid "(read-only)"
msgstr "(읽기 전용)"

#: common/dialogs/panel_color_settings_base.cpp:21
msgid "Theme:"
msgstr "테마:"

#: common/dialogs/panel_color_settings_base.cpp:35
msgid "Override individual item colors"
msgstr "개별 항목 색상 재정의"

#: common/dialogs/panel_color_settings_base.cpp:36
msgid ""
"Show all items in their default color even if they have specific colors set "
"in their properties."
msgstr ""
"속성에 특정 색상이 설정되어 있어도 모든 항목을 기본 색상으로 표시합니다."

#: common/dialogs/panel_color_settings_base.cpp:43
msgid "Open Theme Folder"
msgstr "테마 폴더 열기"

#: common/dialogs/panel_color_settings_base.cpp:44
msgid "Open the folder containing color themes"
msgstr "색상 테마가 포함된 폴더 열기"

#: common/dialogs/panel_common_settings.cpp:86
msgid ""
"Set the scale for the canvas.\n"
"\n"
"On high-DPI displays on some platforms, KiCad cannot determine the scaling "
"factor. In this case you may need to set this to a value to match your "
"system's DPI scaling. 2.0 is a common value. \n"
"\n"
"If this does not match the system DPI scaling, the canvas will not match the "
"window size and cursor position."
msgstr ""
"캔버스의 배율을 설정합니다.\n"
"\n"
"일부 플랫폼의 높은 DPI 디스플레이에서 KiCad는 배율을 결정할 수 없습니다. 이 "
"경우 시스템의 DPI 스케일링과 일치하도록 이 값을 설정해야 할 수도 있습니다. "
"2.0은 일반적인 값입니다.\n"
"\n"
"이것이 시스템 DPI 배율과 일치하지 않으면 캔버스가 창 크기 및 커서 위치와 일치"
"하지 않습니다."

#: common/dialogs/panel_common_settings.cpp:96
msgid ""
"Use an automatic value for the canvas scale.\n"
"\n"
"On some platforms, the automatic value is incorrect and should be set "
"manually."
msgstr ""
"캔버스 크기에 자동 값을 사용합니다.\n"
"\n"
"일부 플랫폼에서는 자동 값이 올바르지 않으므로 수동으로 설정해야 합니다."

#: common/dialogs/panel_common_settings.cpp:342
msgid "Executable files ("
msgstr "실행 파일 ("

#: common/dialogs/panel_common_settings.cpp:349
msgid "Select Preferred PDF Viewer"
msgstr "선호하는 PDF 뷰어 선택"

#: common/dialogs/panel_common_settings_base.cpp:22
msgid "Antialiasing"
msgstr "안티-앨리어싱"

#: common/dialogs/panel_common_settings_base.cpp:39
msgid "Accelerated graphics:"
msgstr "가속 그래픽:"

#: common/dialogs/panel_common_settings_base.cpp:43
#: common/dialogs/panel_common_settings_base.cpp:53
msgid "No Antialiasing"
msgstr "안티알리아싱 없음"

#: common/dialogs/panel_common_settings_base.cpp:43
#: common/dialogs/panel_common_settings_base.cpp:53
msgid "Fast Antialiasing"
msgstr "빠른 안티알리아싱"

#: common/dialogs/panel_common_settings_base.cpp:43
#: common/dialogs/panel_common_settings_base.cpp:53
msgid "High Quality Antialiasing"
msgstr "고품질 안티알리아싱"

#: common/dialogs/panel_common_settings_base.cpp:49
msgid "Fallback graphics:"
msgstr "대체 그래픽:"

#: common/dialogs/panel_common_settings_base.cpp:70
msgid "Helper Applications"
msgstr "도우미 응용 프로그램"

#: common/dialogs/panel_common_settings_base.cpp:84
msgid "Text editor:"
msgstr "텍스트 편집기:"

#: common/dialogs/panel_common_settings_base.cpp:103
msgid "System default PDF viewer"
msgstr "시스템 기본 PDF 뷰어"

#: common/dialogs/panel_common_settings_base.cpp:112
msgid "Other:"
msgstr "기타:"

#: common/dialogs/panel_common_settings_base.cpp:130
msgid "User Interface"
msgstr "사용자 인터페이스"

#: common/dialogs/panel_common_settings_base.cpp:143
msgid "Show icons in menus"
msgstr "메뉴에 아이콘 표시"

#: common/dialogs/panel_common_settings_base.cpp:146
msgid "Show scrollbars in editors"
msgstr "편집기에 스크롤바 표시"

#: common/dialogs/panel_common_settings_base.cpp:148
msgid "This change takes effect when relaunching the editor."
msgstr "이 변경 사항은 편집기를 다시 시작할 때 적용됩니다."

#: common/dialogs/panel_common_settings_base.cpp:152
msgid "Focus follows mouse between schematic and PCB editors"
msgstr "마우스를 따라 회로도와 PCB 편집기 간 포커스 이동"

#: common/dialogs/panel_common_settings_base.cpp:153
msgid ""
"If the mouse cursor is moved over the canvas of a schematic or PCB editor "
"window, that window is raised."
msgstr ""
"마우스 커서가 회로도 또는 PCB 편집기 창의 캔버스 위로 이동하면 해당 창이 열립"
"니다."

#: common/dialogs/panel_common_settings_base.cpp:157
msgid "Show popup indicator when toggling settings with hotkeys"
msgstr "단축키로 설정을 전환할 때 팝업 표시"

#: common/dialogs/panel_common_settings_base.cpp:158
msgid ""
"When enabled, certain hotkeys that cycle between settings will show a popup "
"indicator briefly to indicate the change in settings."
msgstr ""
"활성화되면, 설정 간에 주기적으로 특정 단축키는 팝업 표시를 잠시 보여 설정 변"
"경을 보여줍니다."

#: common/dialogs/panel_common_settings_base.cpp:168
msgid "Icon theme:"
msgstr "아이콘 테마:"

#: common/dialogs/panel_common_settings_base.cpp:172
msgid "Light"
msgstr "밝음"

#: common/dialogs/panel_common_settings_base.cpp:173
msgid "Use icons designed for light window backgrounds"
msgstr "밝은 창 배경용으로 설계된 아이콘 사용"

#: common/dialogs/panel_common_settings_base.cpp:177
#: gerbview/gerber_draw_item.cpp:725
msgid "Dark"
msgstr "어두움"

#: common/dialogs/panel_common_settings_base.cpp:178
msgid "Use icons designed for dark window backgrounds"
msgstr "어두운 창 배경용으로 설계된 아이콘 사용"

#: common/dialogs/panel_common_settings_base.cpp:182
#: common/dialogs/panel_common_settings_base.cpp:228
#: common/dialogs/panel_mouse_settings_base.cpp:66
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:122
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:94
#: pcbnew/pcb_dimension.cpp:1424
msgid "Automatic"
msgstr "자동"

#: common/dialogs/panel_common_settings_base.cpp:184
msgid ""
"Automatically choose light or dark icons based on the system color theme"
msgstr "시스템 색상 테마에 따라 자동으로 밝은 아이콘 또는 어두운 아이콘 선택"

#: common/dialogs/panel_common_settings_base.cpp:194
msgid "Toolbar icon size:"
msgstr "툴바 아이콘 크기:"

#: common/dialogs/panel_common_settings_base.cpp:198
#: eeschema/dialogs/panel_setup_formatting_base.cpp:162
#: pcbnew/dialogs/dialog_plot_base.cpp:114
msgid "Small"
msgstr "소형"

#: common/dialogs/panel_common_settings_base.cpp:199
msgid "Use compact icons in the toolbars"
msgstr "도구 모음에서 콤팩트 아이콘 사용"

#: common/dialogs/panel_common_settings_base.cpp:203 common/eda_text.cpp:807
#: eeschema/lib_textbox.cpp:488 eeschema/sch_label.cpp:1202
#: eeschema/sch_text.cpp:411 eeschema/sch_textbox.cpp:452
#: gerbview/gerber_file_image.cpp:354 gerbview/gerber_file_image.cpp:358
#: gerbview/gerber_file_image.cpp:361
#: pcbnew/microwave/microwave_polygon.cpp:127 pcbnew/tools/pcb_control.cpp:342
#: pcbnew/widgets/appearance_controls.cpp:633
#: pcbnew/widgets/appearance_controls.cpp:1782
msgid "Normal"
msgstr "표준"

#: common/dialogs/panel_common_settings_base.cpp:204
msgid "Use the default KiCad icon size in the toolbars"
msgstr "도구 모음에서 기본 KiCad 아이콘 크기 사용"

#: common/dialogs/panel_common_settings_base.cpp:208
#: eeschema/dialogs/panel_setup_formatting_base.cpp:162
msgid "Large"
msgstr "대형"

#: common/dialogs/panel_common_settings_base.cpp:209
msgid "Use larger icons in the toolbars"
msgstr "도구 모음에서 큰 아이콘 사용"

#: common/dialogs/panel_common_settings_base.cpp:220
msgid "Canvas scale:"
msgstr "캔버스 배율:"

#: common/dialogs/panel_common_settings_base.cpp:237
msgid "Apply icon scaling to fonts"
msgstr "글꼴에 아이콘 크기 조정 적용"

#: common/dialogs/panel_common_settings_base.cpp:240
msgid "(This workaround will improve some GTK HiDPI font scaling issues.)"
msgstr "(이 해결 방법은 일부 GTK HiDPI 글꼴 크기 조정 문제를 개선합니다.)"

#: common/dialogs/panel_common_settings_base.cpp:247
msgid "High-contrast mode dimming factor:"
msgstr "고대비 모드 디밍 팩터:"

#: common/dialogs/panel_common_settings_base.cpp:254
#: eeschema/dialogs/panel_setup_formatting_base.cpp:73
#: eeschema/dialogs/panel_setup_formatting_base.cpp:88
#: eeschema/dialogs/panel_setup_formatting_base.cpp:103
#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:118
#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:138
#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:158
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:330
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:298
#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:174
#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:231
#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:262
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:155
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:196
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:252
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:296
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:997
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:408
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:465
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:496
#: pcbnew/dialogs/dialog_tuning_pattern_properties_base.cpp:101
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:129
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:126
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:255
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:384
msgid "%"
msgstr "%"

#: common/dialogs/panel_common_settings_base.cpp:270
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:20
msgid "Editing"
msgstr "편집"

#: common/dialogs/panel_common_settings_base.cpp:280
msgid "Warp mouse to origin of moved object"
msgstr "이동한 개체의 원점으로 마우스 이동"

#: common/dialogs/panel_common_settings_base.cpp:284
msgid "First hotkey selects tool"
msgstr "첫 번째 단축키 선택 도구"

#: common/dialogs/panel_common_settings_base.cpp:285
msgid ""
"If not checked, hotkeys will immediately perform an action even if the "
"relevant tool was not previously selected."
msgstr ""
"선택하지 않으면 해당 도구가 이전에 선택되지 않은 경우에도 단축키가 즉시 작업"
"을 수행합니다."

#: common/dialogs/panel_common_settings_base.cpp:295
msgid "Session"
msgstr "세션"

#: common/dialogs/panel_common_settings_base.cpp:305
msgid "Remember open files for next project launch"
msgstr "프로젝트 시작 시 열린 파일 기억"

#: common/dialogs/panel_common_settings_base.cpp:307
msgid ""
"If checked, launching a project will also launch tools such as the schematic "
"and board editors with previously open files"
msgstr ""
"이 옵션을 선택하면 프로젝트를 시작할때 이전에 열린 파일이 있는 회로도 및 보"
"드 편집기와 같은 도구도 시작됨"

#: common/dialogs/panel_common_settings_base.cpp:320
msgid "&Auto save:"
msgstr "자동 저장 (&A):"

#: common/dialogs/panel_common_settings_base.cpp:325
msgid ""
"Delay after the first change to create a backup file of the board on disk.\n"
"If set to 0, auto backup is disabled"
msgstr ""
"첫 번째 변경 후 지연하여 디스크에 보드의 백업 파일을 만듭니다.\n"
"0으로 설정된 경우 자동 백업이 비 활성화 됩니다"

#: common/dialogs/panel_common_settings_base.cpp:330
#: common/dialogs/panel_common_settings_base.cpp:417
msgid "minutes"
msgstr "분"

#: common/dialogs/panel_common_settings_base.cpp:334
msgid "File history size:"
msgstr "파일 기록 크기:"

#: common/dialogs/panel_common_settings_base.cpp:341
msgid "3D cache file duration:"
msgstr "3D 캐시 파일 지속 시간:"

#: common/dialogs/panel_common_settings_base.cpp:346
msgid ""
"3D cache files older than this are deleted.\n"
"If set to 0, cache clearing is disabled"
msgstr ""
"이보다 오래된 3D 캐시 파일은 삭제됩니다.\n"
"0으로 설정하면 캐시 지우기가 비활성화 됩니다"

#: common/dialogs/panel_common_settings_base.cpp:350
msgid "days"
msgstr "일"

#: common/dialogs/panel_common_settings_base.cpp:365
msgid "Project Backup"
msgstr "프로젝트 백업"

#: common/dialogs/panel_common_settings_base.cpp:380
msgid "Automatically backup projects"
msgstr "프로젝트 자동 백업"

#: common/dialogs/panel_common_settings_base.cpp:381
msgid ""
"Automatically create backup archives of the current project when saving files"
msgstr "파일 저장 시 현재 프로젝트의 백업 보관 자동 생성"

#: common/dialogs/panel_common_settings_base.cpp:385
msgid "Create backups when auto save occurs"
msgstr "자동 저장 발생 시 백업 생성"

#: common/dialogs/panel_common_settings_base.cpp:386
msgid ""
"Create backups when the auto save feature is enabled.  If not checked, "
"backups will only be created when you manually save a file."
msgstr ""
"자동 저장 기능이 활성화된 경우 백업을 생성합니다. 선택하지 않으면 수동으로 파"
"일을 저장할 때만 백업이 생성됩니다."

#: common/dialogs/panel_common_settings_base.cpp:390
msgid "Maximum backups to keep:"
msgstr "유지할 최대 백업 :"

#: common/dialogs/panel_common_settings_base.cpp:392
msgid "How many backup files total to keep (set to 0 for no limit)"
msgstr "보관할 총 백업 파일 수 (무제한의 경우 0으로 설정)"

#: common/dialogs/panel_common_settings_base.cpp:399
msgid "Maximum backups per day:"
msgstr "일일 최대 백업 수:"

#: common/dialogs/panel_common_settings_base.cpp:401
msgid "How many backup files to keep each day (set to 0 for no limit)"
msgstr "매일 보관할 백업 파일 수 (무제한의 경우 0으로 설정)"

#: common/dialogs/panel_common_settings_base.cpp:408
msgid "Minimum time between backups:"
msgstr "백업 사이의 최소 시간:"

#: common/dialogs/panel_common_settings_base.cpp:410
msgid ""
"Number of minutes since the last backup before another will be created the "
"next time you save (set to 0 for no minimum)"
msgstr "저장할 때 마지막 백업이 생성되기 전의 분 (최소 0으로 설정)"

#: common/dialogs/panel_common_settings_base.cpp:421
msgid "Maximum total backup size:"
msgstr "최대 총 백업 크기:"

#: common/dialogs/panel_common_settings_base.cpp:423
msgid ""
"If the total size of backup files grows above this limit, old backups will "
"be deleted (set to 0 for no limit)"
msgstr ""
"백업 파일의 총 크기가 이 제한을 초과하면 오래된 백업이 삭제됩니다 (제한이 없"
"는 경우 0으로 설정)"

#: common/dialogs/panel_common_settings_base.cpp:430
msgid "MB"
msgstr "MB"

#: common/dialogs/panel_data_collection_base.cpp:20
msgid ""
"KiCad can anonymously report crashes and special event data to developers in "
"order to aid identifying critical bugs across the user base more effectively "
"and help profile functionality to guide improvements.\n"
"\n"
"To link automatic reports from the same KiCad install, a unique identifier "
"is generated that is completely random, and is only used for the purposes of "
"crash reporting. No personally identifiable information (PII) including IP "
"address is stored or connected to this identifier. You may reset this id at "
"anytime with the button provided.\n"
"\n"
"If you choose to voluntarily participate, KiCad will automatically handle "
"sending said reports when crashes or events occur. Your design files such as "
"schematic or PCB are never shared in this process."
msgstr ""
"KiCad는 충돌 및 특별 이벤트 데이터를 개발자에게 익명으로 보고하여 사용자 전체"
"에서 중요한 버그를 보다 효과적으로 식별하고 기능을 프로파일링하여 개선을 유도"
"하는 데 도움을 줄 수 있습니다.\n"
"\n"
"동일한 KiCad 설치에서 자동 보고를 연결하기 위해 완전히 무작위로 생성되는 고"
"유 식별자가 생성되며, 이 식별자는 크래시 보고의 목적으로만 사용됩니다. 이 식"
"별자에는 IP 주소를 포함한 개인 식별 정보(PII)가 저장되거나 연결되지 않습니"
"다. 이 ID는 제공된 버튼을 사용하여 언제든지 재설정할 수 있습니다.\n"
"\n"
"자발적으로 참여하기로 선택하면 충돌 또는 이벤트 발생 시 KiCad에서 자동으로 해"
"당 보고서 전송을 처리합니다. 이 과정에서 회로도나 PCB와 같은 설계 파일은 절"
"대 공유되지 않습니다."

#: common/dialogs/panel_data_collection_base.cpp:24
msgid "I agree to provide anonymous reports"
msgstr "익명으로 보고서를 제공하는 데 동의합니다"

#: common/dialogs/panel_data_collection_base.cpp:35
msgid "Reset Unique Id"
msgstr "고유 ID 재설정"

#: common/dialogs/panel_grid_settings.cpp:54
#, fuzzy
msgid "Footprints/pads:"
msgstr "풋프린트"

#: common/dialogs/panel_grid_settings.cpp:55
#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:81
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:24
msgid "Tracks:"
msgstr "트랙:"

#: common/dialogs/panel_grid_settings.cpp:126 common/tool/grid_menu.cpp:105
#, c-format
msgid "%s%s (%s)"
msgstr "%s%s (%s)"

#: common/dialogs/panel_grid_settings.cpp:249
#, c-format
msgid "Grid size '%s' already exists."
msgstr "그리드 크기 '%s'이(가) 이미 존재함."

#: common/dialogs/panel_grid_settings.cpp:271
msgid "At least one grid size is required."
msgstr "그리드 크기가 하나 이상 필요 함."

#: common/dialogs/panel_grid_settings_base.cpp:25
msgid "Grids:"
msgstr "그리드:"

#: common/dialogs/panel_grid_settings_base.cpp:64
msgid "Fast Grid Switching"
msgstr "빠른 그리드 전환"

#: common/dialogs/panel_grid_settings_base.cpp:77
msgid "Grid 1:"
msgstr "그리드 1:"

#: common/dialogs/panel_grid_settings_base.cpp:86
#: common/dialogs/panel_grid_settings_base.cpp:99
msgid "(hotkey)"
msgstr "(단축키)"

#: common/dialogs/panel_grid_settings_base.cpp:90
msgid "Grid 2:"
msgstr "그리드 2:"

#: common/dialogs/panel_grid_settings_base.cpp:106 common/tool/actions.cpp:705
msgid "Grid Overrides"
msgstr "그리드 재정의"

#: common/dialogs/panel_grid_settings_base.cpp:119
msgid "Connected items:"
msgstr "연결 항목:"

#: common/dialogs/panel_grid_settings_base.cpp:127
msgid "Wires:"
msgstr "배선:"

#: common/dialogs/panel_grid_settings_base.cpp:135
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:88
msgid "Vias:"
msgstr "비아:"

#: common/dialogs/panel_grid_settings_base.cpp:143
#: eeschema/dialogs/dialog_field_properties_base.cpp:33
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:32
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:27
#: eeschema/dialogs/dialog_text_properties_base.cpp:37
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:29
#: pcbnew/dialogs/dialog_text_properties.cpp:121
#: pcbnew/dialogs/dialog_text_properties.cpp:127
#: pcbnew/dialogs/dialog_text_properties_base.cpp:26
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:26
msgid "Text:"
msgstr "텍스트:"

#: common/dialogs/panel_grid_settings_base.cpp:151
msgid "Graphics:"
msgstr "그래픽:"

#: common/dialogs/panel_hotkeys_editor.cpp:78
msgid "Type filter text"
msgstr "필터 텍스트 입력"

#: common/dialogs/panel_hotkeys_editor.cpp:128
msgid "Undo All Changes"
msgstr "모든 변경 사항 취소"

#: common/dialogs/panel_hotkeys_editor.cpp:129
msgid "Undo all changes made so far in this dialog"
msgstr "이 대화 상자에서 지금까지 변경한 모든 변경 사항 취소"

#: common/dialogs/panel_hotkeys_editor.cpp:137
msgid "Import Hotkeys..."
msgstr "단축키 가져 오기 ..."

#: common/dialogs/panel_hotkeys_editor.cpp:138
msgid ""
"Import hotkey definitions from an external file, replacing the current values"
msgstr "현재 값을 대체하여 외부 파일에서 단축키 정의 가져오기"

#: common/dialogs/panel_hotkeys_editor.cpp:201
msgid "Import Hotkeys File:"
msgstr "단축키 파일 가져오기:"

#: common/dialogs/panel_hotkeys_editor.cpp:254
msgid "| Action | Default Hotkey | Description"
msgstr "| 액션 | 기본 단축키 | 설명"

#: common/dialogs/panel_image_editor.cpp:74
msgid "Incorrect scale number"
msgstr "잘못된 배율 번호"

#: common/dialogs/panel_image_editor.cpp:85
#, c-format
msgid ""
"This scale results in an image which is too small (%.2f mm or %.1f mil)."
msgstr "이 배율은 너무 작은 이미지를 생성합니다 (%.2f mm 또는 %.1f mil)."

#: common/dialogs/panel_image_editor.cpp:97
#, c-format
msgid ""
"This scale results in an image which is very large (%.1f mm or %.2f in). Are "
"you sure?"
msgstr ""
"이 배율은 매우 큰 이미지를 생성합니다 (%.1f mm 또는 %.2f in). 계속하시겠습니"
"까?"

#: common/dialogs/panel_image_editor_base.cpp:33
msgid "Scale:"
msgstr "배율:"

#: common/dialogs/panel_image_editor_base.cpp:40
msgid "PPI:"
msgstr "PPI:"

#: common/dialogs/panel_image_editor_base.cpp:48
msgid "Convert to Greyscale"
msgstr "회색조로 변환"

#: common/dialogs/panel_mouse_settings.cpp:46
#: pcbnew/dialogs/panel_edit_options_base.cpp:225
msgid "Cmd"
msgstr "커멘드"

#: common/dialogs/panel_mouse_settings.cpp:84
msgid "Only one action can be assigned to each vertical scroll setting"
msgstr "각 세로 스크롤 설정에는 하나의 작업만 할당할 수 있습니다"

#: common/dialogs/panel_mouse_settings_base.cpp:20
msgid "Pan and Zoom"
msgstr "이동 및 확대/축소"

#: common/dialogs/panel_mouse_settings_base.cpp:35
msgid "Center and warp cursor on zoom"
msgstr "확대/축소 시 중심 및 커서 회전"

#: common/dialogs/panel_mouse_settings_base.cpp:36
msgid "Center the cursor on screen when zooming."
msgstr "확대할 때 커서를 화면의 중앙에 표시합니다."

#: common/dialogs/panel_mouse_settings_base.cpp:43
msgid "Automatically pan while moving object"
msgstr "객체를 이동하는 동안 자동으로 이동"

#: common/dialogs/panel_mouse_settings_base.cpp:44
msgid ""
"When drawing a track or moving an item, pan when approaching the edge of the "
"display."
msgstr ""
"배선을 그리거나 항목을 이동할 때, 디스플레이 가장자리에 접근하면 화면을 이동"
"합니다."

#: common/dialogs/panel_mouse_settings_base.cpp:48
msgid "Use zoom acceleration"
msgstr "줌 가속 사용"

#: common/dialogs/panel_mouse_settings_base.cpp:49
msgid "Zoom faster when scrolling quickly"
msgstr "빠르게 스크롤할 때 줌 속도 향상"

#: common/dialogs/panel_mouse_settings_base.cpp:55
msgid "Zoom speed:"
msgstr "줌 속도:"

#: common/dialogs/panel_mouse_settings_base.cpp:61
msgid "How far to zoom in for each rotation of the mouse wheel"
msgstr "마우스 휠을 돌릴 때마다 확대하는 정도"

#: common/dialogs/panel_mouse_settings_base.cpp:68
msgid "Pick the zoom speed automatically"
msgstr "줌 속도 자동으로 선택"

#: common/dialogs/panel_mouse_settings_base.cpp:77
msgid "Auto pan speed:"
msgstr "자동 이동 속도:"

#: common/dialogs/panel_mouse_settings_base.cpp:82
msgid "How fast to pan when moving an object off the edge of the screen"
msgstr "화면 가장자리에서 개체를 이동할 때 이동하는 속도"

#: common/dialogs/panel_mouse_settings_base.cpp:103
msgid "Drag Gestures"
msgstr "제스처 끌기"

#: common/dialogs/panel_mouse_settings_base.cpp:122
msgid "Left button drag:"
msgstr "왼쪽 버튼 끌기:"

#: common/dialogs/panel_mouse_settings_base.cpp:126
msgid "Draw selection rectangle"
msgstr "개체 선택 (사각형 범위)"

#: common/dialogs/panel_mouse_settings_base.cpp:126
msgid "Drag selected objects; otherwise draw selection rectangle"
msgstr "선택한 개체 끌기; 개체 선택 하기"

#: common/dialogs/panel_mouse_settings_base.cpp:126
msgid "Drag any object (selected or not)"
msgstr "선택한 개체 드래그"

#: common/dialogs/panel_mouse_settings_base.cpp:135
msgid "Middle button drag:"
msgstr "가운데 버튼 끌기:"

#: common/dialogs/panel_mouse_settings_base.cpp:139
#: common/dialogs/panel_mouse_settings_base.cpp:152
msgid "Pan"
msgstr "이동"

#: common/dialogs/panel_mouse_settings_base.cpp:139
#: common/dialogs/panel_mouse_settings_base.cpp:152
#: common/tool/zoom_menu.cpp:56
msgid "Zoom"
msgstr "줌"

#: common/dialogs/panel_mouse_settings_base.cpp:139
#: common/dialogs/panel_mouse_settings_base.cpp:152
#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:182
#: eeschema/dialogs/panel_setup_formatting_base.cpp:162
#: eeschema/lib_shape.cpp:593
#: pcbnew/board_stackup_manager/panel_board_finish_base.cpp:44
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:49
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:158
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:232
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:45
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:364
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:332
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:91
#: pcbnew/dialogs/dialog_pad_properties.cpp:906
#: pcbnew/dialogs/dialog_pad_properties.cpp:915
#: pcbnew/dialogs/dialog_pad_properties.cpp:925
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:558
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:839
#: pcbnew/dialogs/dialog_plot_base.cpp:114 pcbnew/footprint.cpp:3456
#: pcbnew/pad.cpp:1893 pcbnew/pad.cpp:1907 pcbnew/pcb_dimension.cpp:1618
#: pcbnew/widgets/appearance_controls.cpp:725
#: pcbnew/widgets/appearance_controls.cpp:767
#: pcbnew/widgets/appearance_controls.cpp:2481
#: pcbnew/widgets/appearance_controls.cpp:2500 pcbnew/zone.cpp:1549
msgid "None"
msgstr "없음"

#: common/dialogs/panel_mouse_settings_base.cpp:148
msgid "Right button drag:"
msgstr "오른쪽 버튼 끌기:"

#: common/dialogs/panel_mouse_settings_base.cpp:170
msgid "Scroll Gestures"
msgstr "제스처 스크롤"

#: common/dialogs/panel_mouse_settings_base.cpp:186
msgid "Vertical touchpad or scroll wheel movement:"
msgstr "수직 터치패드 또는 스크롤 휠 움직임:"

#: common/dialogs/panel_mouse_settings_base.cpp:191
msgid "Only one action can be assigned to each column"
msgstr "각 열에 하나의 작업만 할당할 수 있습니다"

#: common/dialogs/panel_mouse_settings_base.cpp:208
msgid "--"
msgstr "--"

#: common/dialogs/panel_mouse_settings_base.cpp:212
#: pcbnew/dialogs/panel_edit_options_base.cpp:153
msgid "Ctrl"
msgstr "Ctrl"

#: common/dialogs/panel_mouse_settings_base.cpp:216
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:154
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:212
#: pcbnew/dialogs/panel_edit_options_base.cpp:133
#: pcbnew/dialogs/panel_edit_options_base.cpp:205
msgid "Shift"
msgstr "Shift"

#: common/dialogs/panel_mouse_settings_base.cpp:220
msgid "Alt"
msgstr "Alt"

#: common/dialogs/panel_mouse_settings_base.cpp:228
msgid "Zoom:"
msgstr "줌:"

#: common/dialogs/panel_mouse_settings_base.cpp:248
msgid "Pan up/down:"
msgstr "이동 위/아래:"

#: common/dialogs/panel_mouse_settings_base.cpp:268
msgid "Pan left/right:"
msgstr "이동 왼쪽/오른쪽:"

#: common/dialogs/panel_mouse_settings_base.cpp:284
msgid "Reverse"
msgstr "반전"

#: common/dialogs/panel_mouse_settings_base.cpp:305
msgid "Pan left/right with horizontal movement"
msgstr "수평 이동으로 왼쪽/오른쪽으로 이동"

#: common/dialogs/panel_mouse_settings_base.cpp:306
msgid ""
"Pan the canvas left and right when scrolling left to right on the touchpad"
msgstr ""
"터치패드에서 왼쪽에서 오른쪽으로 스크롤할 때 캔버스를 왼쪽과 오른쪽으로 이동"

#: common/dialogs/panel_mouse_settings_base.cpp:316
msgid "Reset to Mouse Defaults"
msgstr "마우스 기본값으로 재설정"

#: common/dialogs/panel_mouse_settings_base.cpp:319
msgid "Reset to Trackpad Defaults"
msgstr "트랙패드 기본값으로 재설정"

#: common/dialogs/panel_packages_and_updates_base.cpp:17
#: common/eda_base_frame.cpp:1182
#: eeschema/dialogs/dialog_image_properties_base.cpp:66
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:165
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:295
#: eeschema/dialogs/dialog_schematic_setup.cpp:53
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:125
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:254
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:209
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:87
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:261
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:229
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:571
#: pcbnew/dialogs/dialog_reference_image_properties_base.cpp:74
msgid "General"
msgstr "일반"

#: common/dialogs/panel_packages_and_updates_base.cpp:30
msgid "Check for KiCad updates on startup"
msgstr "시작 시 KiCad 업데이트 확인"

#: common/dialogs/panel_packages_and_updates_base.cpp:40
#: kicad/dialogs/dialog_update_check_prompt_base.cpp:34
#: kicad/pcm/dialogs/dialog_pcm.cpp:213
#: kicad/tools/kicad_manager_actions.cpp:186
msgid "Plugin and Content Manager"
msgstr "플러그인과 컨텐츠 매니저"

#: common/dialogs/panel_packages_and_updates_base.cpp:53
msgid "Check for package updates on startup"
msgstr "시작 시 패키지 업데이트 확인"

#: common/dialogs/panel_packages_and_updates_base.cpp:63
msgid "Library package handling"
msgstr "라이브러리 패키지 처리"

#: common/dialogs/panel_packages_and_updates_base.cpp:76
msgid "Automatically add installed libraries to global library table"
msgstr "설치된 라이브러리를 전역 라이브러리 표에 자동으로 추가하기"

#: common/dialogs/panel_packages_and_updates_base.cpp:80
msgid "Automatically remove uninstalled libraries"
msgstr "설치되지 않은 라이브러리를 자동으로 제거"

#: common/dialogs/panel_packages_and_updates_base.cpp:87
msgid "Library nickname prefix:"
msgstr "라이브러리 별칭 접두사:"

#: common/dialogs/panel_setup_netclasses.cpp:90 common/eda_shape.cpp:1948
#: common/stroke_params.cpp:36
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:372
#: eeschema/sch_bus_entry.cpp:638 eeschema/sch_line.cpp:1057
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:232
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:364
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:332
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:839 pcbnew/footprint.cpp:3458
#: pcbnew/pad.cpp:1909 pcbnew/pcb_textbox.cpp:655 pcbnew/zone.cpp:629
#: pcbnew/zone.cpp:1551
msgid "Solid"
msgstr "실선"

#: common/dialogs/panel_setup_netclasses.cpp:92 common/eda_shape.cpp:1949
#: common/stroke_params.cpp:37
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:372
#: eeschema/sch_bus_entry.cpp:639 eeschema/sch_line.cpp:1058
#: pcbnew/pcb_textbox.cpp:656
msgid "Dashed"
msgstr "파선"

#: common/dialogs/panel_setup_netclasses.cpp:94 common/eda_shape.cpp:1950
#: common/stroke_params.cpp:38
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:372
#: eeschema/sch_bus_entry.cpp:640 eeschema/sch_line.cpp:1059
#: pcbnew/pcb_textbox.cpp:657
msgid "Dotted"
msgstr "점선"

#: common/dialogs/panel_setup_netclasses.cpp:96 common/eda_shape.cpp:1951
#: common/stroke_params.cpp:39
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:372
#: eeschema/sch_bus_entry.cpp:641 eeschema/sch_line.cpp:1060
#: pcbnew/pcb_textbox.cpp:658
msgid "Dash-Dot"
msgstr "대시-도트"

#: common/dialogs/panel_setup_netclasses.cpp:98 common/eda_shape.cpp:1952
#: common/stroke_params.cpp:40
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:372
#: eeschema/sch_bus_entry.cpp:642 eeschema/sch_line.cpp:1061
#: pcbnew/pcb_textbox.cpp:659
msgid "Dash-Dot-Dot"
msgstr "대시-도트-도트"

#: common/dialogs/panel_setup_netclasses.cpp:331
msgid ""
"The netclasses have been changed outside the Setup dialog.\n"
"Do you wish to reload them?"
msgstr ""
"NetClass 설정이 외부에서 변경되었습니다.\n"
"다시 로드하시겠습니까?"

#: common/dialogs/panel_setup_netclasses.cpp:467
msgid "Netclass must have a name."
msgstr "네트클래스에는 이름이 있어야 합니다."

#: common/dialogs/panel_setup_netclasses.cpp:476
msgid "Netclass name already in use."
msgstr "네트클래스 이름이 이미 사용 중입니다."

#: common/dialogs/panel_setup_netclasses.cpp:538
msgid "Minimum copper clearance"
msgstr "최소 구리 클리어런스"

#: common/dialogs/panel_setup_netclasses.cpp:539
msgid "Minimum track width"
msgstr "최소 배선 폭"

#: common/dialogs/panel_setup_netclasses.cpp:540
msgid "Via pad diameter"
msgstr "비아 패드 직경"

#: common/dialogs/panel_setup_netclasses.cpp:541
msgid "Via plated hole diameter"
msgstr "비아 도금 구멍 직경"

#: common/dialogs/panel_setup_netclasses.cpp:542
msgid "Microvia pad diameter"
msgstr "마이크로비아 패드 직경"

#: common/dialogs/panel_setup_netclasses.cpp:543
msgid "Microvia plated hole diameter"
msgstr "마이크로비아 도금 구멍 직경"

#: common/dialogs/panel_setup_netclasses.cpp:544
msgid "Differential pair track width"
msgstr "차동 쌍 배선 폭"

#: common/dialogs/panel_setup_netclasses.cpp:545
msgid "Differential pair gap"
msgstr "차동 쌍 간격"

#: common/dialogs/panel_setup_netclasses.cpp:546
msgid "Schematic wire thickness"
msgstr "회로도 와이어 두께"

#: common/dialogs/panel_setup_netclasses.cpp:547
msgid "Bus wire thickness"
msgstr "버스 와이어 두께"

#: common/dialogs/panel_setup_netclasses.cpp:548
msgid "Schematic wire color"
msgstr "회로도 와이어 색상"

#: common/dialogs/panel_setup_netclasses.cpp:549
msgid "Schematic wire line style"
msgstr "회로도 와이어 라인 스타일"

#: common/dialogs/panel_setup_netclasses.cpp:602
msgid "The default net class is required."
msgstr "기본 네트 클래스가 필요합니다."

#: common/dialogs/panel_setup_netclasses.cpp:745
#, c-format
msgid "<b>Nets matching '%s':</b>"
msgstr "<b> '%s'와 일치하는 네트:</b>"

#: common/dialogs/panel_setup_netclasses_base.cpp:32
msgid "Netclasses:"
msgstr "네트클래스:"

#: common/dialogs/panel_setup_netclasses_base.cpp:52
#: pcbnew/tools/board_inspection_tool.cpp:539
#: pcbnew/tools/board_inspection_tool.cpp:1106 pcbnew/zone.cpp:1718
msgid "Clearance"
msgstr "클리어런스"

#: common/dialogs/panel_setup_netclasses_base.cpp:53
#: pcb_calculator/pcb_calculator_frame.cpp:172
#: pcbnew/tools/board_inspection_tool.cpp:361
#: pcbnew/tools/board_inspection_tool.cpp:1261
msgid "Track Width"
msgstr "배선 폭"

#: common/dialogs/panel_setup_netclasses_base.cpp:54
#: pcb_calculator/pcb_calculator_frame.cpp:171
msgid "Via Size"
msgstr "비아 크기"

#: common/dialogs/panel_setup_netclasses_base.cpp:55
msgid "Via Hole"
msgstr "비아 홀"

#: common/dialogs/panel_setup_netclasses_base.cpp:56
msgid "uVia Size"
msgstr "마이크로 비아 크기"

#: common/dialogs/panel_setup_netclasses_base.cpp:57
msgid "uVia Hole"
msgstr "마이크로 비아 홀"

#: common/dialogs/panel_setup_netclasses_base.cpp:58
msgid "DP Width"
msgstr "DP 폭"

#: common/dialogs/panel_setup_netclasses_base.cpp:59
msgid "DP Gap"
msgstr "DP 간격"

#: common/dialogs/panel_setup_netclasses_base.cpp:60
msgid "Wire Thickness"
msgstr "배선 두께"

#: common/dialogs/panel_setup_netclasses_base.cpp:61
msgid "Bus Thickness"
msgstr "버스 두께"

#: common/dialogs/panel_setup_netclasses_base.cpp:63 common/eda_shape.cpp:2029
#: common/stroke_params.cpp:219 eeschema/sch_bus_entry.cpp:650
#: eeschema/sch_line.cpp:945 eeschema/sch_line.cpp:1070
#: pcbnew/pcb_textbox.cpp:675
msgid "Line Style"
msgstr "선 스타일"

#: common/dialogs/panel_setup_netclasses_base.cpp:69 common/eda_shape.cpp:1947
#: common/pgm_base.cpp:90 common/stroke_params.cpp:208
#: common/widgets/footprint_select_widget.cpp:149
#: eeschema/dialogs/dialog_global_edit_text_and_graphics.cpp:69
#: eeschema/dialogs/dialog_junction_props.cpp:47
#: eeschema/dialogs/dialog_line_properties.cpp:57
#: eeschema/dialogs/dialog_sim_model.cpp:592
#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:67
#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:261
#: eeschema/dialogs/dialog_wire_bus_properties.cpp:60
#: eeschema/dialogs/panel_setup_formatting_base.cpp:162
#: eeschema/lib_field.cpp:550 eeschema/lib_text.cpp:417
#: eeschema/lib_textbox.cpp:486 eeschema/sch_bus_entry.cpp:637
#: eeschema/sch_field.cpp:914 eeschema/sch_label.cpp:1200
#: eeschema/sch_line.cpp:1056 eeschema/sch_text.cpp:409
#: eeschema/sch_textbox.cpp:450 include/stroke_params.h:73
#: pcbnew/generators/pcb_tuning_pattern.cpp:2326 pcbnew/pcb_dimension.cpp:429
#: pcbnew/pcb_text.cpp:243 pcbnew/pcb_textbox.cpp:367
#: pcbnew/pcb_textbox.cpp:654
msgid "Default"
msgstr "기본값"

#: common/dialogs/panel_setup_netclasses_base.cpp:94
msgid "Set color to transparent to use KiCad default color."
msgstr "KiCad 기본 색상을 사용하려면 색상을 투명으로 설정하십시오."

#: common/dialogs/panel_setup_netclasses_base.cpp:112
msgid "Netclass assignments:"
msgstr "네트클래스 할당:"

#: common/dialogs/panel_setup_netclasses_base.cpp:136
msgid "Pattern"
msgstr "패턴"

#: common/dialogs/panel_setup_netclasses_base.cpp:137
#: eeschema/sch_field.cpp:1053 eeschema/sch_label.cpp:251
#: pcbnew/board_connected_item.cpp:186 pcbnew/pad.cpp:1947 pcbnew/zone.cpp:1632
msgid "Net Class"
msgstr "네트 클래스"

#: common/dialogs/panel_setup_severities.cpp:43
#: common/dialogs/panel_setup_severities.cpp:117 pcbnew/pcb_marker.cpp:200
msgid "Ignore"
msgstr "무시"

#: common/dialogs/panel_setup_severities.cpp:117
msgid "From Pin Conflicts Map"
msgstr "핀 충돌 표시 보기"

#: common/dialogs/panel_setup_severities.cpp:178
msgid ""
"The violation severities have been changed outside the Setup dialog.\n"
"Do you wish to reload them?"
msgstr ""
"위반 심각도 설정이 외부에서 변경되었습니다.\n"
"다시 로드하시겠습니까?"

#: common/dialogs/panel_text_variables.cpp:104
msgid ""
"The text variables have been changed outside the Setup dialog.\n"
"Do you wish to reload them?"
msgstr ""
"텍스트 변수 설정이 외부에서 변경되었습니다.\n"
"다시 로드하시겠습니까?"

#: common/dialogs/panel_text_variables.cpp:158
#: common/dialogs/panel_text_variables.cpp:186
msgid "Variable name cannot be empty."
msgstr "변수 이름은 비워 둘 수 없습니다."

#: common/dialogs/panel_text_variables_base.cpp:37
msgid "Variable Name"
msgstr "변수 이름"

#: common/dialogs/panel_text_variables_base.cpp:38
msgid "Text Substitution"
msgstr "텍스트 대체"

#: common/draw_panel_gal.cpp:316 common/draw_panel_gal.cpp:497
msgid "Could not use OpenGL, falling back to software rendering"
msgstr "OpenGL을 사용할 수 없으며, 소프트웨어 렌더링으로 대체됨"

#: common/draw_panel_gal.cpp:324
msgid "Graphics error"
msgstr "그래픽 오류"

#: common/draw_panel_gal.cpp:504
msgid "Could not use OpenGL"
msgstr "OpenGL을 사용할 수 없음"

#: common/drawing_sheet/drawing_sheet_parser.cpp:557
#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:3217
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:3104
msgid "Failed to read image data."
msgstr "이미지 데이터 읽기에 실패함."

#: common/drawing_sheet/drawing_sheet_parser.cpp:979
#, c-format
msgid "Drawing sheet '%s' not found."
msgstr "도면 시트 파일 '%s'을(를) 찾을 수 없습니다."

#: common/drawing_sheet/drawing_sheet_parser.cpp:989
#, c-format
msgid "Drawing sheet '%s' could not be opened."
msgstr "도면 시트 파일 '%s'을(를) 찾을 수 없습니다."

#: common/drawing_sheet/drawing_sheet_parser.cpp:1002
#, c-format
msgid "Drawing sheet '%s' was not fully read."
msgstr "'%s' 파일을 완전히 읽지 못했음."

#: common/drawing_sheet/ds_data_item.cpp:365
#: common/drawing_sheet/ds_draw_item.cpp:132 common/eda_item.cpp:349
#: common/eda_item.cpp:350 common/eda_item.cpp:375 common/eda_item.cpp:396
#: common/eda_text.cpp:1181 eeschema/dialogs/panel_setup_formatting_base.cpp:47
#: eeschema/lib_field.cpp:546 eeschema/lib_text.cpp:415 eeschema/lib_text.h:60
#: eeschema/sch_field.cpp:910 eeschema/sch_field.cpp:1414
#: eeschema/sch_label.cpp:2155 eeschema/schematic.cpp:63
#: eeschema/widgets/search_handlers.cpp:214
#: eeschema/widgets/search_handlers.cpp:217
#: eeschema/widgets/search_handlers.cpp:263
#: pagelayout_editor/dialogs/dialog_design_inspector_base.cpp:39
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:142
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:28
#: pcbnew/pcb_dimension.cpp:1462 pcbnew/pcb_dimension.cpp:1521
#: pcbnew/pcb_dimension.cpp:1557 pcbnew/pcb_dimension.cpp:1598
#: pcbnew/pcb_dimension.cpp:1643 pcbnew/pcb_dimension.cpp:1680
#: pcbnew/pcb_field.cpp:226 pcbnew/pcb_text.cpp:224 pcbnew/pcb_text.cpp:378
#: pcbnew/widgets/panel_selection_filter.cpp:187
#: pcbnew/widgets/panel_selection_filter_base.cpp:33
#: pcbnew/widgets/search_handlers.cpp:203
#: pcbnew/widgets/search_handlers.cpp:206
#: pcbnew/widgets/search_handlers.cpp:244
msgid "Text"
msgstr "텍스트"

#: common/drawing_sheet/ds_data_item.cpp:366
#: common/drawing_sheet/ds_draw_item.cpp:121 common/eda_item.cpp:372
#: common/eda_shape.cpp:75 eeschema/lib_pin.cpp:1641 eeschema/pin_type.cpp:79
#: gerbview/gerber_draw_item.cpp:229
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:134
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:59
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:120
msgid "Line"
msgstr "선"

#: common/drawing_sheet/ds_data_item.cpp:367
#: common/drawing_sheet/ds_draw_item.cpp:125 common/eda_shape.cpp:718
#: common/eda_shape.cpp:1937
#: eeschema/dialogs/dialog_label_properties_base.cpp:178
#: eeschema/sch_label.cpp:2137
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:45 pcbnew/pad.cpp:1885
#: pcbnew/pcb_dimension.cpp:1619
msgid "Rectangle"
msgstr "직사각형"

#: common/drawing_sheet/ds_data_item.cpp:368
#: common/drawing_sheet/ds_draw_item.cpp:137
#: common/drawing_sheet/ds_draw_item.cpp:331
msgid "Imported Shape"
msgstr "가져온 셰이프"

#: common/drawing_sheet/ds_data_item.cpp:369
#: common/drawing_sheet/ds_draw_item.cpp:141
#: common/drawing_sheet/ds_draw_item.cpp:512 common/eda_item.cpp:403
#: eeschema/dialogs/dialog_image_properties.cpp:39 eeschema/sch_bitmap.h:140
#: pcbnew/dialogs/dialog_reference_image_properties.cpp:44
msgid "Image"
msgstr "이미지"

#: common/drawing_sheet/ds_data_model_io.cpp:94
#: common/drawing_sheet/ds_data_model_io.cpp:123
msgid "Error writing drawing sheet file"
msgstr "도면 시트 파일 작성 중 오류 발생"

#: common/drawing_sheet/ds_draw_item.cpp:147
msgid "First Page Only"
msgstr "첫 페이지만"

#: common/drawing_sheet/ds_draw_item.cpp:148
msgid "Subsequent Pages"
msgstr "후속 페이지"

#: common/drawing_sheet/ds_draw_item.cpp:149
msgid "All Pages"
msgstr "모든 페이지"

#: common/drawing_sheet/ds_draw_item.cpp:152
msgid "First Page Option"
msgstr "첫 페이지 옵션"

#: common/drawing_sheet/ds_draw_item.cpp:156
msgid "Repeat Count"
msgstr "반복 횟수"

#: common/drawing_sheet/ds_draw_item.cpp:160
msgid "Repeat Label Increment"
msgstr "라벨 증가 반복"

#: common/drawing_sheet/ds_draw_item.cpp:166
msgid "Repeat Position Increment"
msgstr "위치 증분 반복"

#: common/drawing_sheet/ds_draw_item.cpp:168
#: pagelayout_editor/dialogs/dialog_design_inspector_base.cpp:38
msgid "Comment"
msgstr "주석"

#: common/drawing_sheet/ds_draw_item.cpp:236
#, c-format
msgid "Text '%s'"
msgstr "텍스트 '%s'"

#: common/drawing_sheet/ds_draw_item.cpp:427 eeschema/sch_shape.cpp:445
#, c-format
msgid "Rectangle, width %s height %s"
msgstr "직사각형, 너비 %s 높이 %s"

#: common/drawing_sheet/ds_draw_item.cpp:460
#, c-format
msgid "Line, length %s"
msgstr "선, 길이 %s"

#: common/drawing_sheet/ds_draw_item.cpp:518
#: gerbview/dialogs/panel_gerbview_color_settings.cpp:105
#: gerbview/widgets/gerbview_layer_widget.cpp:138
msgid "Page Limits"
msgstr "페이지 제한"

#: common/dsnlexer.cpp:34
msgid "clipboard"
msgstr "클립보드"

#: common/dsnlexer.cpp:328
#, c-format
msgid "Expecting %s"
msgstr "%s 예상됨"

#: common/dsnlexer.cpp:336
#, c-format
msgid "Expecting '%s'"
msgstr "'%s' 예상됨"

#: common/dsnlexer.cpp:344
#, c-format
msgid "Unexpected %s"
msgstr "예기치 않은 오류 %s"

#: common/dsnlexer.cpp:352
#, c-format
msgid "%s is a duplicate"
msgstr "%s은(는) 중복되어 있습니다"

#: common/dsnlexer.cpp:360
#, c-format
msgid "Unexpected '%s'"
msgstr "예기치 않은 '%s'"

#: common/dsnlexer.cpp:410
#, c-format
msgid "need a number for '%s'"
msgstr "'%s'에 대한 숫자가 필요함"

#: common/dsnlexer.cpp:695 common/dsnlexer.cpp:756
msgid "Un-terminated delimited string"
msgstr "종료되지 않은 구분 문자열"

#: common/dsnlexer.cpp:717
msgid "String delimiter must be a single character of ', \", or $"
msgstr "문자열 구분자는 ', \" 또는 $의 단일 문자여야 함"

#: common/dsnlexer.cpp:839
#, c-format
msgid ""
"Invalid floating point number in\n"
"file: '%s'\n"
"line: %d\n"
"offset: %d"
msgstr ""
"잘못된 속성 이름이\n"
"파일: '%s'\n"
"행: %d\n"
"오프셋: %d 에서 발견됨"

#: common/dsnlexer.cpp:848
#, c-format
msgid ""
"Missing floating point number in\n"
"file: '%s'\n"
"line: %d\n"
"offset: %d"
msgstr ""
"잘못된 속성 이름이\n"
"파일: '%s'\n"
"행: %d\n"
"오프셋: %d 에서 발견됨"

#: common/dsnlexer.cpp:873
msgid "Invalid floating point number"
msgstr "잘못된 부동 소수점 숫자"

#: common/eda_base_frame.cpp:417 common/tool/actions.cpp:176
#: pcbnew/dialogs/panel_setup_rules.cpp:123
msgid "Undo"
msgstr "실행 취소"

#: common/eda_base_frame.cpp:426 common/tool/actions.cpp:189
#: pcbnew/dialogs/panel_setup_rules.cpp:124
msgid "Redo"
msgstr "재실행"

#: common/eda_base_frame.cpp:1008
#, c-format
msgid "File '%s' was not found."
msgstr "파일 '%s'을(를) 찾을 수 없습니다."

#: common/eda_base_frame.cpp:1057
msgid "Preferences"
msgstr "환경설정"

#: common/eda_base_frame.cpp:1077 common/hotkey_store.cpp:71
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:20
msgid "Common"
msgstr "공통"

#: common/eda_base_frame.cpp:1083
msgid "Mouse and Touchpad"
msgstr "마우스 및 터치패드"

#: common/eda_base_frame.cpp:1085
msgid "Hotkeys"
msgstr "단축키"

#: common/eda_base_frame.cpp:1095 kicad/project_tree_pane.cpp:985
msgid "Version Control"
msgstr "버전 관리"

#: common/eda_base_frame.cpp:1103
msgid "Data Collection"
msgstr "데이터 수집"

#: common/eda_base_frame.cpp:1126 common/tool/actions.cpp:881
#: common/tool/common_tools.cpp:562 eeschema/symbol_editor/symbol_editor.cpp:82
#: kicad/tools/kicad_manager_actions.cpp:115
msgid "Symbol Editor"
msgstr "심볼 편집기"

#: common/eda_base_frame.cpp:1127 common/eda_base_frame.cpp:1136
#: common/eda_base_frame.cpp:1160 common/eda_base_frame.cpp:1171
#: common/eda_base_frame.cpp:1203 common/eda_base_frame.cpp:1224
msgid "Display Options"
msgstr "디스플레이 옵션"

#: common/eda_base_frame.cpp:1128 common/eda_base_frame.cpp:1137
#: common/eda_base_frame.cpp:1161 common/eda_base_frame.cpp:1172
#: common/eda_base_frame.cpp:1225 common/tool/common_tools.cpp:555
msgid "Grids"
msgstr "그리드"

#: common/eda_base_frame.cpp:1129 common/eda_base_frame.cpp:1138
#: common/eda_base_frame.cpp:1163 common/eda_base_frame.cpp:1174
#: pcbnew/dialogs/panel_edit_options_base.cpp:24
#: pcbnew/tools/zone_filler_tool.cpp:280
msgid "Editing Options"
msgstr "편집 옵션"

#: common/eda_base_frame.cpp:1130 common/eda_base_frame.cpp:1140
#: common/eda_base_frame.cpp:1164 common/eda_base_frame.cpp:1175
#: common/eda_base_frame.cpp:1204 common/eda_base_frame.cpp:1226
msgid "Colors"
msgstr "색상"

#: common/eda_base_frame.cpp:1135 common/hotkey_store.cpp:73
#: common/tool/common_tools.cpp:561 eeschema/menubar.cpp:143
#: eeschema/sch_edit_frame.cpp:1655 kicad/tools/kicad_manager_actions.cpp:104
msgid "Schematic Editor"
msgstr "회로도 편집기"

#: common/eda_base_frame.cpp:1139
msgid "Annotation Options"
msgstr "주석 옵션"

#: common/eda_base_frame.cpp:1141
#: eeschema/dialogs/dialog_schematic_setup.cpp:68
msgid "Field Name Templates"
msgstr "필드 이름 템플릿"

#: common/eda_base_frame.cpp:1159 common/tool/actions.cpp:899
#: common/tool/common_tools.cpp:564 kicad/tools/kicad_manager_actions.cpp:137
#: pcbnew/footprint_edit_frame.cpp:990 pcbnew/menubar_footprint_editor.cpp:91
msgid "Footprint Editor"
msgstr "풋프린트 편집기"

#: common/eda_base_frame.cpp:1162 common/eda_base_frame.cpp:1173
msgid "Origins & Axes"
msgstr "원점과 축"

#: common/eda_base_frame.cpp:1165
#: pagelayout_editor/dialogs/properties_frame_base.cpp:466
msgid "Default Values"
msgstr "기본값"

#: common/eda_base_frame.cpp:1170 common/hotkey_store.cpp:74
#: common/tool/common_tools.cpp:563 kicad/tools/kicad_manager_actions.cpp:126
#: pcbnew/menubar_pcb_editor.cpp:185 pcbnew/pcb_edit_frame.cpp:186
#: pcbnew/pcb_edit_frame.cpp:1671 pcbnew/tools/zone_filler_tool.cpp:281
msgid "PCB Editor"
msgstr "PCB 편집기"

#: common/eda_base_frame.cpp:1176
msgid "Action Plugins"
msgstr "플러그인 작업"

#: common/eda_base_frame.cpp:1183
msgid "Realtime Renderer"
msgstr "실시간 렌더러"

#: common/eda_base_frame.cpp:1184
msgid "Raytracing Renderer"
msgstr "레이트레이싱 렌더러"

#: common/eda_base_frame.cpp:1202 common/hotkey_store.cpp:77
#: gerbview/gerbview_frame.cpp:674 gerbview/gerbview_frame.cpp:698
#: gerbview/menubar.cpp:159 kicad/tools/kicad_manager_actions.cpp:148
msgid "Gerber Viewer"
msgstr "거버 뷰어"

#: common/eda_base_frame.cpp:1205
msgid "Excellon Options"
msgstr "Excellon 설정"

#: common/eda_base_frame.cpp:1223 common/hotkey_store.cpp:75
#: common/tool/common_tools.cpp:565 kicad/tools/kicad_manager_actions.cpp:177
#: pagelayout_editor/menubar.cpp:88 pagelayout_editor/menubar.cpp:89
#: pagelayout_editor/pl_editor_frame.cpp:570
msgid "Drawing Sheet Editor"
msgstr "도면 시트 편집기"

#: common/eda_base_frame.cpp:1232
msgid "Packages and Updates"
msgstr "패키지와 업데이트"

#: common/eda_base_frame.cpp:1318
#, c-format
msgid "Insufficient permissions to folder '%s'."
msgstr "폴더 '%s'에 대한 권한이 없습니다."

#: common/eda_base_frame.cpp:1359
#, c-format
msgid ""
"Well this is potentially embarrassing!\n"
"It appears that the last time you were editing\n"
"%s\n"
"KiCad exited before saving.\n"
"\n"
"Do you wish to open the auto-saved file instead?"
msgstr ""
"이건 정말 난처한 일이네요!\n"
"마지막으로 파일을 편집한 시간인\n"
"%s\n"
"KiCad는 저장하기 전에 종료되었습니다.\n"
"\n"
"대신 자동 저장된 파일을 열시겠습니까?"

#: common/eda_base_frame.cpp:1379
msgid "The auto save file could not be renamed to the board file name."
msgstr "자동 저장 파일의 이름을 보드 파일 이름으로 바꿀 수 없습니다."

#: common/eda_base_frame.cpp:1619
msgid "Set Language"
msgstr "언어 설정"

#: common/eda_doc.cpp:116
msgid "Documentation File"
msgstr "문서 파일"

#: common/eda_doc.cpp:126
#, c-format
msgid "Documentation file '%s' not found."
msgstr "문서 파일 '%s'을(를) 찾을 수 없습니다."

#: common/eda_doc.cpp:172
#, c-format
msgid "Unknown MIME type for documentation file '%s'"
msgstr "문서 파일 '%s'에 대한 알 수 없는 MIME 유형"

#: common/eda_draw_frame.cpp:157 common/tool/actions.cpp:725
#: eeschema/import_gfx/dialog_import_gfx_sch.cpp:58
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:31
#: pagelayout_editor/pl_editor_frame.cpp:166
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:122
#: pcbnew/dialogs/dialog_export_2581_base.cpp:55
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:55
#: pcbnew/dialogs/dialog_gendrill_base.cpp:106
#: pcbnew/dialogs/dialog_plot_base.cpp:342
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:94
#: pcbnew/import_gfx/dialog_import_graphics.cpp:53
#: pcbnew/pcb_dimension.cpp:1421
msgid "Inches"
msgstr "Inch"

#: common/eda_draw_frame.cpp:163 pagelayout_editor/pl_editor_frame.cpp:169
#: pcbnew/tools/drawing_tool.cpp:326 pcbnew/tools/edit_tool_move_fct.cpp:319
#: pcbnew/tools/pcb_actions.cpp:1174
msgid "Constrain to H, V, 45"
msgstr "수평, 수직, 45도 각도로 제한"

#: common/eda_draw_frame.cpp:406 common/tool/actions.cpp:712
msgid "Edit Grids..."
msgstr "그리드 편집 ..."

#: common/eda_draw_frame.cpp:562
msgid "Zoom Auto"
msgstr "자동 확대"

#: common/eda_draw_frame.cpp:571
#, c-format
msgid "Zoom %.2f"
msgstr "줌 %.2f"

#: common/eda_draw_frame.cpp:653
#, c-format
msgid "grid %s"
msgstr "그리드 %s"

#: common/eda_draw_frame.cpp:666 pagelayout_editor/pl_editor_frame.cpp:755
msgid "inches"
msgstr "inch"

#: common/eda_draw_frame.cpp:667
#: eeschema/dialogs/dialog_junction_props_base.cpp:34
#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:119
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:303
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:314
#: eeschema/dialogs/panel_setup_formatting_base.cpp:62
#: eeschema/dialogs/panel_setup_formatting_base.cpp:129
#: eeschema/dialogs/panel_setup_formatting_base.cpp:140
#: eeschema/dialogs/panel_setup_formatting_base.cpp:175
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:43
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:58
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:69
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:80
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:91
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:126
#: pagelayout_editor/pl_editor_frame.cpp:756
msgid "mils"
msgstr "mils"

#: common/eda_draw_frame.cpp:669 pcbnew/dialogs/dialog_export_vrml_base.cpp:111
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:57
#: pcbnew/footprint_wizard_frame.cpp:327 pcbnew/pcb_dimension.cpp:427
#: pcbnew/pcb_dimension.cpp:1467
msgid "Units"
msgstr "단위"

#: common/eda_draw_frame.cpp:1094 pcbnew/footprint_libraries_utils.cpp:1388
msgid "Select Library"
msgstr "라이브러리 선택"

#: common/eda_draw_frame.cpp:1094
msgid "New Library"
msgstr "새 라이브러리"

#: common/eda_draw_frame.cpp:1192 common/widgets/search_pane.cpp:39
#: eeschema/sch_edit_frame.cpp:232 pcbnew/pcb_edit_frame.cpp:321
msgid "Search"
msgstr "검색"

#: common/eda_draw_frame.cpp:1200 eeschema/eeschema_settings.cpp:92
#: pagelayout_editor/pl_editor_frame.cpp:193
#: pcbnew/footprint_edit_frame.cpp:232 pcbnew/pcb_edit_frame.cpp:312
#: pcbnew/pcb_edit_frame.cpp:1579
msgid "Properties"
msgstr "속성"

#: common/eda_item.cpp:342
msgid "Screen"
msgstr "화면"

#: common/eda_item.cpp:344 eeschema/sch_symbol.cpp:1945
#: eeschema/widgets/search_handlers.cpp:132 pcbnew/build_BOM_from_board.cpp:110
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:141
#: pcbnew/load_select_footprint.cpp:289 pcbnew/pad.cpp:980
#: pcbnew/pcb_shape.cpp:468 pcbnew/pcb_text.cpp:220
#: pcbnew/plot_board_layers.cpp:94
msgid "Footprint"
msgstr "풋프린트"

#: common/eda_item.cpp:345 pcbnew/dialogs/dialog_board_statistics.cpp:506
#: pcbnew/pad.cpp:983
msgid "Pad"
msgstr "패드"

#: common/eda_item.cpp:346 common/eda_item.cpp:374 common/eda_item.cpp:395
msgid "Graphic"
msgstr "그래픽"

#: common/eda_item.cpp:347 pcbnew/pcb_reference_image.cpp:254
#: pcbnew/pcb_reference_image.h:125
msgid "Reference Image"
msgstr "참조 이미지"

#: common/eda_item.cpp:348 pcbnew/pcb_generator.cpp:196
msgid "Generator"
msgstr "생성"

#: common/eda_item.cpp:351 common/eda_item.cpp:376 common/eda_item.cpp:397
#: eeschema/lib_textbox.cpp:484 eeschema/sch_textbox.cpp:445
#: eeschema/widgets/search_handlers.cpp:281 pcbnew/pcb_textbox.cpp:358
#: pcbnew/pcb_textbox.h:65
msgid "Text Box"
msgstr "텍스트 상자"

#: common/eda_item.cpp:352 common/eda_item.cpp:353 pcbnew/pcb_track.cpp:1058
msgid "Track"
msgstr "배선"

#: common/eda_item.cpp:354 pcbnew/dialogs/dialog_board_statistics.cpp:506
#: pcbnew/pcb_track.cpp:1056 pcbnew/pcb_track.cpp:1132
msgid "Via"
msgstr "비아"

#: common/eda_item.cpp:355 common/eda_item.cpp:367 pcbnew/pcb_marker.cpp:194
msgid "Marker"
msgstr "마커"

#: common/eda_item.cpp:356 common/eda_item.cpp:357 common/eda_item.cpp:358
#: common/eda_item.cpp:359 pcbnew/pcb_dimension.cpp:396
#: pcbnew/widgets/search_handlers.cpp:248
msgid "Dimension"
msgstr "치수"

#: common/eda_item.cpp:360 pcbnew/pcb_dimension.cpp:1059
#: pcbnew/pcb_dimension.cpp:1186
msgid "Leader"
msgstr "리더"

#: common/eda_item.cpp:361 pcbnew/pcb_target.cpp:125
msgid "Target"
msgstr "표적"

#: common/eda_item.cpp:362 pcbnew/tools/board_inspection_tool.cpp:728
msgid "Zone"
msgstr "영역"

#: common/eda_item.cpp:363
msgid "ItemList"
msgstr "항목 목록"

#: common/eda_item.cpp:364
msgid "NetInfo"
msgstr "네트 정보"

#: common/eda_item.cpp:365 pcbnew/pcb_group.cpp:382
msgid "Group"
msgstr "그룹"

#: common/eda_item.cpp:368 eeschema/sch_junction.cpp:289
#: eeschema/sch_junction.h:101
msgid "Junction"
msgstr "접합부"

#: common/eda_item.cpp:369
msgid "No-Connect Flag"
msgstr "연결 없음 플래그"

#: common/eda_item.cpp:370
msgid "Wire Entry"
msgstr "와이어 엔트리"

#: common/eda_item.cpp:371
msgid "Bus Entry"
msgstr "버스 항목"

#: common/eda_item.cpp:373 eeschema/sch_bitmap.cpp:226
msgid "Bitmap"
msgstr "비트맵"

#: common/eda_item.cpp:377 eeschema/tools/sch_edit_tool.cpp:196
msgid "Net Label"
msgstr "네트 라벨"

#: common/eda_item.cpp:378 eeschema/sch_label.cpp:1186
#: eeschema/sch_label.cpp:1691
msgid "Directive Label"
msgstr "지시문 레이블"

#: common/eda_item.cpp:379 eeschema/sch_label.cpp:1187
#: eeschema/tools/sch_edit_tool.cpp:198
msgid "Global Label"
msgstr "전역 라벨"

#: common/eda_item.cpp:380 eeschema/sch_label.cpp:1188
#: eeschema/tools/sch_edit_tool.cpp:197
msgid "Hierarchical Label"
msgstr "계층 라벨"

#: common/eda_item.cpp:381 eeschema/dialogs/dialog_symbol_fields_table.cpp:187
#: eeschema/lib_field.cpp:543 eeschema/lib_field.h:84
#: eeschema/sch_label.cpp:253
msgid "Field"
msgstr "필드"

#: common/eda_item.cpp:382 common/eda_item.cpp:394
#: eeschema/symbol_editor/symbol_editor.cpp:1292
msgid "Symbol"
msgstr "심볼"

#: common/eda_item.cpp:383 common/eda_item.cpp:398 eeschema/lib_pin.h:65
#: eeschema/sch_pin.cpp:237
msgid "Pin"
msgstr "핀"

#: common/eda_item.cpp:384
msgid "Sheet Pin"
msgstr "시트 핀"

#: common/eda_item.cpp:385 eeschema/dialogs/dialog_migrate_buses.cpp:113
#: pcbnew/tools/pcb_actions.cpp:2137
msgid "Sheet"
msgstr "시트"

#: common/eda_item.cpp:392
msgid "SCH Screen"
msgstr "SCH 화면"

#: common/eda_item.cpp:399 eeschema/sch_field.cpp:907
msgid "Symbol Field"
msgstr "심볼 필드"

#: common/eda_item.cpp:401
msgid "Gerber Layout"
msgstr "거버 레이아웃"

#: common/eda_item.cpp:402
msgid "Draw Item"
msgstr "그리기 항목"

#: common/eda_shape.cpp:66
msgid "Thermal Spoke"
msgstr "써멀 스포크"

#: common/eda_shape.cpp:67 pcbnew/pcb_shape.cpp:743
msgid "Number Box"
msgstr "번호 상자"

#: common/eda_shape.cpp:76 pcbnew/pad.cpp:1233
msgid "Rect"
msgstr "사각형"

#: common/eda_shape.cpp:77 common/eda_shape.cpp:715 common/eda_shape.cpp:1938
#: gerbview/gerber_draw_item.cpp:230
msgid "Arc"
msgstr "호"

#: common/eda_shape.cpp:78 common/eda_shape.cpp:714 common/eda_shape.cpp:1939
#: eeschema/dialogs/dialog_label_properties_base.cpp:172
#: eeschema/sch_label.cpp:2135 gerbview/gerber_draw_item.cpp:231
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:45 pcbnew/pad.cpp:1231
#: pcbnew/pad.cpp:1884 pcbnew/pcb_dimension.cpp:1620
msgid "Circle"
msgstr "원"

#: common/eda_shape.cpp:79
msgid "Bezier Curve"
msgstr "베지어 곡선"

#: common/eda_shape.cpp:80 common/eda_shape.cpp:717 common/eda_shape.cpp:1940
msgid "Polygon"
msgstr "다각형"

#: common/eda_shape.cpp:705
msgid "Pad Number Box"
msgstr "패드 번호 상자"

#: common/eda_shape.cpp:706 pcbnew/pcb_shape.cpp:750
msgid "Thermal Spoke Template"
msgstr "써멀 스포크 템플릿"

#: common/eda_shape.cpp:707 common/eda_shape.cpp:720
msgid "Unrecognized"
msgstr "인식할 수 없음"

#: common/eda_shape.cpp:716
msgid "Curve"
msgstr "곡선"

#: common/eda_shape.cpp:719 common/eda_shape.cpp:1936
msgid "Segment"
msgstr "세그먼트"

#: common/eda_shape.cpp:730 common/eda_shape.cpp:1986
#: eeschema/dialogs/dialog_label_properties_base.cpp:152
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:53
#: eeschema/sch_label.cpp:2117 eeschema/sch_label.cpp:2148
#: eeschema/sch_textbox.cpp:515
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:228
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:120
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:44
#: pcbnew/microwave/microwave_polygon.cpp:129 pcbnew/pcb_target.cpp:157
#: pcbnew/pcb_target.cpp:243 pcbnew/pcb_textbox.cpp:669
msgid "Shape"
msgstr "형상"

#: common/eda_shape.cpp:736 common/eda_shape.cpp:743 common/eda_shape.cpp:2009
#: pcbnew/dialogs/dialog_shape_properties.cpp:197 pcbnew/pcb_track.cpp:1079
msgid "Radius"
msgstr "반지름"

#: common/eda_shape.cpp:741 common/eda_shape.cpp:771 common/eda_shape.cpp:2035
#: pcbnew/pcb_text.cpp:241 pcbnew/pcb_textbox.cpp:365
msgid "Angle"
msgstr "각도"

#: common/eda_shape.cpp:747 common/eda_shape.cpp:765
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:127
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:95
#: eeschema/lib_pin.cpp:1199 eeschema/lib_pin.cpp:1689 eeschema/sch_pin.cpp:263
#: eeschema/sch_pin.cpp:527
msgid "Length"
msgstr "길이"

#: common/eda_shape.cpp:752
msgid "Points"
msgstr "포인트"

#: common/eda_shape.cpp:756 common/eda_text.cpp:1209 eeschema/lib_field.cpp:664
#: eeschema/lib_text.cpp:532 eeschema/sch_bitmap.cpp:231
#: eeschema/sch_field.cpp:1400 eeschema/sch_text.cpp:495
#: eeschema/sch_textbox.cpp:517 pcbnew/dialogs/dialog_board_statistics.cpp:676
#: pcbnew/dialogs/dialog_board_statistics.cpp:686
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:55
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:55
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:40
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:169
#: pcbnew/fp_text_grid_table.cpp:140
#: pcbnew/generators/pcb_tuning_pattern.cpp:1945 pcbnew/pad.cpp:1031
#: pcbnew/pcb_reference_image.cpp:259 pcbnew/pcb_target.cpp:156
#: pcbnew/pcb_target.cpp:240 pcbnew/pcb_text.cpp:245 pcbnew/pcb_track.cpp:1074
#: pcbnew/pcb_track.cpp:1489 pcbnew/pcb_track.cpp:1519
msgid "Width"
msgstr "두께"

#: common/eda_shape.cpp:759 common/eda_text.cpp:1214 eeschema/lib_field.cpp:665
#: eeschema/lib_text.cpp:533 eeschema/sch_bitmap.cpp:232
#: eeschema/sch_field.cpp:1401 eeschema/sch_text.cpp:496
#: eeschema/sch_textbox.cpp:518 pcbnew/dialogs/dialog_board_statistics.cpp:678
#: pcbnew/dialogs/dialog_board_statistics.cpp:687
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:56
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:56
#: pcbnew/fp_text_grid_table.cpp:141 pcbnew/pad.cpp:1032
#: pcbnew/pcb_dimension.cpp:834 pcbnew/pcb_reference_image.cpp:260
#: pcbnew/pcb_text.cpp:246
msgid "Height"
msgstr "높이"

#: common/eda_shape.cpp:1941
msgid "Bezier"
msgstr "베지어"

#: common/eda_shape.cpp:1990 pcbnew/pcb_textbox.cpp:670
#: pcbnew/pcb_track.cpp:1492
msgid "Start X"
msgstr "시작 X"

#: common/eda_shape.cpp:1994 pcbnew/pcb_textbox.cpp:671
#: pcbnew/pcb_track.cpp:1496
msgid "Start Y"
msgstr "시작 Y"

#: common/eda_shape.cpp:1999
msgid "Center X"
msgstr "중앙 X"

#: common/eda_shape.cpp:2004
msgid "Center Y"
msgstr "중앙 Y"

#: common/eda_shape.cpp:2014 pcbnew/generators/pcb_tuning_pattern.cpp:2338
#: pcbnew/pcb_textbox.cpp:672 pcbnew/pcb_track.cpp:1499
msgid "End X"
msgstr "끝 X"

#: common/eda_shape.cpp:2019 pcbnew/generators/pcb_tuning_pattern.cpp:2344
#: pcbnew/pcb_textbox.cpp:673 pcbnew/pcb_track.cpp:1502
msgid "End Y"
msgstr "끝 Y"

#: common/eda_shape.cpp:2024 common/stroke_params.cpp:223
#: eeschema/sch_bus_entry.cpp:653 eeschema/sch_line.cpp:1073
#: pcbnew/pcb_textbox.cpp:674
msgid "Line Width"
msgstr "선 두께"

#: common/eda_shape.cpp:2031 pcbnew/pcb_shape.cpp:684
msgid "Line Color"
msgstr "선 색상"

#: common/eda_shape.cpp:2068 eeschema/lib_shape.cpp:587
#: pcbnew/dialogs/dialog_plot_base.cpp:134
msgid "Filled"
msgstr "채움"

#: common/eda_shape.cpp:2072 pcbnew/pcb_shape.cpp:685
msgid "Fill Color"
msgstr "채움 색상"

#: common/eda_text.cpp:808 common/eda_text.cpp:1196
#: eeschema/dialogs/dialog_field_properties_base.cpp:143
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:217
#: eeschema/dialogs/dialog_label_properties_base.cpp:93
#: eeschema/dialogs/dialog_label_properties_base.cpp:214
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:65
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:107
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:89
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:105
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:65
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:62
#: eeschema/dialogs/dialog_text_properties_base.cpp:113
#: eeschema/fields_grid_table.cpp:349 eeschema/lib_textbox.cpp:488
#: eeschema/sch_label.cpp:1202 eeschema/sch_label.cpp:2157
#: eeschema/sch_text.cpp:411 eeschema/sch_textbox.cpp:452
#: pagelayout_editor/dialogs/properties_frame_base.cpp:98
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:58
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:58
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:291
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:211
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:177
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:53
#: pcbnew/fp_text_grid_table.cpp:143
msgid "Italic"
msgstr "이탤릭체"

#: common/eda_text.cpp:809 common/eda_text.cpp:1200
#: eeschema/dialogs/dialog_field_properties_base.cpp:138
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:214
#: eeschema/dialogs/dialog_label_properties_base.cpp:94
#: eeschema/dialogs/dialog_label_properties_base.cpp:209
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:66
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:102
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:84
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:100
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:66
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:63
#: eeschema/dialogs/dialog_text_properties_base.cpp:108
#: eeschema/fields_grid_table.cpp:350 eeschema/lib_textbox.cpp:488
#: eeschema/sch_label.cpp:1202 eeschema/sch_label.cpp:2158
#: eeschema/sch_text.cpp:411 eeschema/sch_textbox.cpp:452
#: eeschema/widgets/tuner_slider_base.cpp:43
#: eeschema/widgets/tuner_slider_base.cpp:48
#: eeschema/widgets/tuner_slider_base.cpp:53
#: eeschema/widgets/tuner_slider_base.cpp:61
#: eeschema/widgets/tuner_slider_base.cpp:69
#: pagelayout_editor/dialogs/properties_frame_base.cpp:93
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:192
msgid "Bold"
msgstr "굵게"

#: common/eda_text.cpp:810
msgid "Bold+Italic"
msgstr "굵게+이탤릭체"

#: common/eda_text.cpp:1164
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:242
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:283
#: eeschema/fields_grid_table.cpp:249 eeschema/fields_grid_table.cpp:587
#: eeschema/fields_grid_table.cpp:727 eeschema/lib_field.cpp:558
#: eeschema/lib_pin.cpp:1657 eeschema/lib_text.cpp:425
#: eeschema/pin_type.cpp:106 eeschema/sch_field.cpp:922
#: pcbnew/generators/pcb_tuning_pattern.cpp:2324
msgid "Left"
msgstr "좌"

#: common/eda_text.cpp:1165 common/eda_text.cpp:1169
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:283
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:307
#: eeschema/fields_grid_table.cpp:242 eeschema/fields_grid_table.cpp:250
#: eeschema/fields_grid_table.cpp:588 eeschema/fields_grid_table.cpp:598
#: eeschema/fields_grid_table.cpp:729 eeschema/fields_grid_table.cpp:753
#: eeschema/lib_field.cpp:559 eeschema/lib_field.cpp:568
#: eeschema/lib_text.cpp:426 eeschema/lib_text.cpp:435
#: eeschema/sch_field.cpp:923 eeschema/sch_field.cpp:932
#: gerbview/gerber_file_image.cpp:358 gerbview/gerber_file_image.cpp:361
msgid "Center"
msgstr "중"

#: common/eda_text.cpp:1166
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:242
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:283
#: eeschema/fields_grid_table.cpp:251 eeschema/fields_grid_table.cpp:589
#: eeschema/fields_grid_table.cpp:731 eeschema/lib_field.cpp:560
#: eeschema/lib_pin.cpp:1656 eeschema/lib_text.cpp:427
#: eeschema/pin_type.cpp:105 eeschema/sch_field.cpp:924
#: pcbnew/generators/pcb_tuning_pattern.cpp:2325
msgid "Right"
msgstr "우"

#: common/eda_text.cpp:1168
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:307
#: eeschema/fields_grid_table.cpp:241 eeschema/fields_grid_table.cpp:597
#: eeschema/fields_grid_table.cpp:751 eeschema/lib_field.cpp:567
#: eeschema/lib_text.cpp:434 eeschema/sch_field.cpp:931
msgid "Top"
msgstr "상"

#: common/eda_text.cpp:1170
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:307
#: eeschema/fields_grid_table.cpp:243 eeschema/fields_grid_table.cpp:599
#: eeschema/fields_grid_table.cpp:755 eeschema/lib_field.cpp:569
#: eeschema/lib_text.cpp:436 eeschema/sch_field.cpp:933
msgid "Bottom"
msgstr "하"

#: common/eda_text.cpp:1175
#: eeschema/dialogs/dialog_label_properties_base.cpp:96
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:124
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:92
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:68
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:68
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:65
#: eeschema/fields_grid_table.cpp:352 eeschema/lib_field.cpp:667
#: eeschema/lib_pin.cpp:1201 eeschema/lib_pin.cpp:1686
#: eeschema/lib_text.cpp:536 eeschema/sch_field.cpp:1403
#: eeschema/sch_pin.cpp:265 eeschema/sch_symbol.cpp:2671
#: eeschema/sch_text.cpp:504 eeschema/sch_textbox.cpp:525
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:60
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:60
#: pcbnew/footprint.cpp:3488 pcbnew/fp_text_grid_table.cpp:145
#: pcbnew/pad.cpp:1919 pcbnew/zone.cpp:1648
msgid "Orientation"
msgstr "방향"

#: common/eda_text.cpp:1179 eeschema/dialogs/dialog_text_properties_base.h:113
#: eeschema/sch_text.cpp:501 eeschema/sch_textbox.cpp:523
#: pcbnew/dialogs/dialog_text_properties.cpp:154
#: pcbnew/dialogs/dialog_text_properties_base.h:111 pcbnew/pcb_text.cpp:567
#: pcbnew/pcb_text.cpp:571
msgid "Text Properties"
msgstr "텍스트 속성"

#: common/eda_text.cpp:1187
#: eeschema/dialogs/dialog_label_properties_base.cpp:99
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:71
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:71
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:68
#: eeschema/fields_grid_table.cpp:355 eeschema/lib_field.cpp:550
#: eeschema/lib_text.cpp:417 eeschema/lib_textbox.cpp:486
#: eeschema/sch_field.cpp:914 eeschema/sch_label.cpp:1200
#: eeschema/sch_text.cpp:409 eeschema/sch_textbox.cpp:450
#: eeschema/widgets/sch_properties_panel.cpp:230 pcbnew/pcb_dimension.cpp:429
#: pcbnew/pcb_text.cpp:243 pcbnew/pcb_textbox.cpp:367
#: pcbnew/widgets/pcb_properties_panel.cpp:279
msgid "Font"
msgstr "폰트"

#: common/eda_text.cpp:1192 eeschema/lib_field.cpp:661
#: eeschema/sch_field.cpp:1398 eeschema/sch_label.cpp:2156
#: eeschema/sch_text.cpp:497 eeschema/sch_textbox.cpp:519
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:91
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:57
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:57
#: pcbnew/fp_text_grid_table.cpp:142 pcbnew/pcb_text.cpp:244
msgid "Thickness"
msgstr "두께"

#: common/eda_text.cpp:1203 eeschema/lib_field.cpp:662
#: eeschema/lib_text.cpp:530 eeschema/sch_field.cpp:1399
#: eeschema/sch_text.cpp:493 pcbnew/microwave/microwave_polygon.cpp:127
msgid "Mirrored"
msgstr "미러링"

#: common/eda_text.cpp:1206
#: eeschema/dialogs/dialog_field_properties_base.cpp:88
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:296
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:130
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:98
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:45
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:95
#: eeschema/dialogs/panel_template_fieldnames_base.cpp:43
#: eeschema/lib_field.cpp:548 eeschema/lib_field.cpp:663
#: eeschema/lib_pin.cpp:1701 eeschema/lib_text.cpp:531
#: eeschema/sch_field.cpp:912 eeschema/sch_pin.cpp:261
#: eeschema/sch_text.cpp:494 include/lib_table_grid.h:198
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:140
#: pcbnew/dialogs/dialog_text_properties_base.cpp:86
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:45
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:94 pcbnew/pcb_dimension.cpp:1518
#: pcbnew/pcb_dimension.cpp:1554 pcbnew/pcb_dimension.cpp:1595
#: pcbnew/pcb_dimension.cpp:1640 pcbnew/pcb_dimension.cpp:1677
#: pcbnew/pcb_text.cpp:583 pcbnew/pcb_textbox.cpp:676
msgid "Visible"
msgstr "보기"

#: common/eda_text.cpp:1220 eeschema/sch_label.cpp:2159
msgid "Horizontal Justification"
msgstr "수평 위치 맞춤"

#: common/eda_text.cpp:1224 eeschema/sch_label.cpp:2160
#: pcbnew/pcb_dimension.cpp:1524 pcbnew/pcb_dimension.cpp:1560
#: pcbnew/pcb_dimension.cpp:1601 pcbnew/pcb_dimension.cpp:1646
#: pcbnew/pcb_dimension.cpp:1683
msgid "Vertical Justification"
msgstr "수직 위치 맞춤"

#: common/eda_text.cpp:1232 eeschema/lib_field.cpp:660
#: eeschema/sch_field.cpp:1397 eeschema/sch_label.cpp:2121
#: pcbnew/pcb_dimension.cpp:1527 pcbnew/pcb_dimension.cpp:1563
#: pcbnew/pcb_dimension.cpp:1604 pcbnew/pcb_dimension.cpp:1649
#: pcbnew/pcb_dimension.cpp:1686 pcbnew/pcb_text.cpp:589
msgid "Hyperlink"
msgstr "하이퍼링크"

#: common/eda_units.cpp:476 pcbnew/generators/pcb_tuning_pattern.cpp:205
msgid "min"
msgstr "최소"

#: common/eda_units.cpp:484
msgid "opt"
msgstr "선택"

#: common/eda_units.cpp:492 pcbnew/generators/pcb_tuning_pattern.cpp:208
msgid "max"
msgstr "최대"

#: common/env_vars.cpp:108
msgid ""
"The base path of locally installed system footprint libraries (.pretty "
"folders)."
msgstr ""
"지역적으로 설치된 시스템 풋프린트 라이브러리 (.pretty 폴더) 의 기본 경로."

#: common/env_vars.cpp:111
msgid "The base path of system footprint 3D shapes (.3Dshapes folders)."
msgstr "시스템 풋프린트 3D 모양의 기본 경로(.3Dshapes 폴더)."

#: common/env_vars.cpp:113
msgid "The base path of the locally installed symbol libraries."
msgstr "로컬로 설치된 심볼 라이브러리의 기본 경로입니다."

#: common/env_vars.cpp:115
msgid "A directory containing project templates installed with KiCad."
msgstr "KiCad와 함께 설치된 프로젝트 템플릿이 포함된 디렉토리."

#: common/env_vars.cpp:117
msgid ""
"Optional. Can be defined if you want to create your own project templates "
"folder."
msgstr "선택사항. 고유한 프로젝트 템플릿 폴더를 만들려면 정의할 수 있습니다."

#: common/env_vars.cpp:120
msgid ""
"A directory containing 3rd party plugins, libraries and other downloadable "
"content."
msgstr ""
"서드 파티 플러그인과 라이브러리, 그 외의 다운로드 가능한 컨텐츠가 저장되는 디"
"렉토리입니다."

#: common/env_vars.cpp:123
msgid ""
"Internally defined by KiCad (cannot be edited) and is set to the absolute "
"path of the currently loaded project file.  This environment variable can be "
"used to define files and paths relative to the currently loaded project.  "
"For instance, ${KIPRJMOD}/libs/footprints.pretty can be defined as a folder "
"containing a project specific footprint library named footprints.pretty."
msgstr ""
"KiCad에서 내부적으로 정의되어 있으며, (편집 불가), 현재 불러온 프로젝트 파일"
"의 절대 경로로 설정됩니다. 이 환경 변수는 현재 불러온 프로젝트와 관련된 파일 "
"및 경로를 정의하는 데 사용할 수 있습니다. 예를 들어 ${KIPRJMOD}/libs/"
"footprints.pretty는 Footprints.pretty라는 프로젝트별 풋프린트 라이브러리를 포"
"함하는 폴더로 정의할 수 있습니다."

#: common/env_vars.cpp:129
msgid "A directory containing system-wide scripts installed with KiCad"
msgstr "KiCad와 함께 설치된 시스템 전체 스크립트가 포함된 디렉토리"

#: common/env_vars.cpp:131
msgid "A directory containing user-specific scripts installed with KiCad"
msgstr "KiCad와 함께 설치된 사용자별 스크립트가 포함된 디렉토리"

#: common/env_vars.cpp:135
msgid "Deprecated version of KICAD_TEMPLATE_DIR."
msgstr "더 이상 사용되지 않는 KICAD_TEMPLATE_DIR 버전."

#: common/env_vars.cpp:137
msgid "Deprecated version of KICAD7_3DMODEL_DIR."
msgstr "더 이상 사용되지 않는 KICAD7_3DMODEL_DIR 버전."

#: common/env_vars.cpp:139
msgid "Deprecated version of KICAD7_FOOTPRINT_DIR."
msgstr "더 이상 사용되지 않는 KICAD7_FOOTPRINT_DIR 버전."

#: common/env_vars.cpp:141
msgid "Deprecated version of KICAD_SYMBOL_DIR."
msgstr "더 이상 사용되지 않는 KICAD_SYMBOL_DIR 버전."

#: common/exceptions.cpp:62
#, c-format
msgid "from %s : %s() line %d"
msgstr "%s : %s() 에서 %d 행"

#: common/exceptions.cpp:76
#, c-format
msgid "%s in '%s', line %d, offset %d."
msgstr "%s ('%s'에 있음), %d번째 행, 오프셋 %d."

#: common/exceptions.cpp:90
#, c-format
msgid "from %s : %s() line:%d"
msgstr "%s(으)로부터: %s() 행: %d"

#: common/exceptions.cpp:105
#, c-format
msgid ""
"KiCad was unable to open this file because it was created with a more recent "
"version than the one you are running.\n"
"\n"
"To open it you will need to upgrade KiCad to a version dated %s or later."
msgstr ""
"실행 중인 파일보다 최신 버전으로 생성되었기 때문에 KiCad에서 이 파일을 열 수 "
"없습니다.\n"
"\n"
"열려면 KiCad를 %s 이후 버전으로 업그레이드해야 합니다."

#: common/exceptions.cpp:113
#, c-format
msgid ""
"KiCad was unable to open this file because it was created with a more recent "
"version than the one you are running.\n"
"\n"
"To open it you will need to upgrade KiCad to version %s or later (file "
"format dated %s or later)."
msgstr ""
"이 파일은 실행 중인 버전보다 최신 버전으로 만들어졌기 때문에 KiCad에서 열 수 "
"없습니다.\n"
"\n"
"이 파일을 열려면 KiCad를 버전 %s 이상으로 업그레이드해야 합니다(파일 형식은 "
"%s 이상)."

#: common/exceptions.cpp:149
msgid "Full error text:"
msgstr "전체 오류 텍스트:"

#: common/file_history.cpp:155
msgid "No Files"
msgstr "파일 없음"

#: common/filename_resolver.cpp:453
msgid "The given path does not exist"
msgstr "지정된 경로가 존재하지 않음"

#: common/filename_resolver.cpp:481
msgid "Alias: "
msgstr "별칭: "

#: common/filename_resolver.cpp:484
msgid "This path:"
msgstr "이 경로:"

#: common/filename_resolver.cpp:487
msgid "Existing path:"
msgstr "기존 경로:"

#: common/filename_resolver.cpp:489
msgid "Bad alias (duplicate name)"
msgstr "잘못된 별칭 (중복된 이름)"

#: common/font/font.cpp:174 common/widgets/font_choice.cpp:49
#: eeschema/dialogs/dialog_field_properties_base.cpp:123
#: eeschema/dialogs/dialog_label_properties_base.cpp:195
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:72
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:69
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:85
#: eeschema/dialogs/dialog_text_properties_base.cpp:93
#: eeschema/fields_grid_table.cpp:60
#: eeschema/widgets/sch_properties_panel.cpp:224
#: pagelayout_editor/dialogs/properties_frame_base.cpp:155
msgid "Default Font"
msgstr "기본 글꼴"

#: common/font/fontconfig.cpp:320
#, c-format
msgid "Error loading font '%s'."
msgstr "오류 로딩 글꼴 %s."

#: common/font/fontconfig.cpp:325
#, c-format
msgid "Font '%s' not found; substituting '%s'."
msgstr "글꼴 '%s'를 찾을 수 없음; '%s'로 대체합니다."

#: common/footprint_info.cpp:119 cvpcb/cvpcb_mainframe.cpp:962
#: eeschema/symbol_library_manager.cpp:82
#: eeschema/symbol_tree_model_adapter.cpp:107
#: eeschema/symbol_viewer_frame.cpp:304
msgid "Load Error"
msgstr "불러오기 오류"

#: common/footprint_info.cpp:121
msgid "Errors were encountered loading footprints:"
msgstr "풋프린트를 불러오는 중에 오류가 발생했습니다:"

#: common/fp_lib_table.cpp:220
#, c-format
msgid ""
"Duplicate library nickname '%s' found in footprint library table file line "
"%d."
msgstr ""
"중복 라이브러리 별명 '%s'이(가) 풋프린트 라이브러리 테이블 파일의 행 %d에 있"
"습니다."

#: common/fp_lib_table.cpp:330
#, c-format
msgid "fp-lib-table files contain no library named '%s'."
msgstr "fp-lib-table 파일에는 '%s'라는 라이브러리가 없습니다."

#: common/fp_lib_table.cpp:559 eeschema/symbol_lib_table.cpp:602
msgid "Added by Plugin and Content Manager"
msgstr "플러그인 및 콘텐츠 관리자에 의해 추가 됨"

#: common/fp_lib_table.cpp:585 eeschema/symbol_lib_table.cpp:630
#, c-format
msgid "Cannot create global library table path '%s'."
msgstr "전역 라이브러리 테이블 경로 '%s'을(를) 만들 수 없습니다."

#: common/gestfich.cpp:236
#, c-format
msgid "Command '%s' could not be found."
msgstr "명령 '%s'을(를) 찾을 수 없습니다."

#: common/gestfich.cpp:253
#, c-format
msgid "Unable to find a PDF viewer for '%s'."
msgstr "'%s'에 대한 PDF 뷰어를 찾을 수 없음."

#: common/gestfich.cpp:268
#, c-format
msgid "Problem while running the PDF viewer '%s'."
msgstr "PDF 뷰어 '%s'를 실행하는 중에 문제가 발생했습니다."

#: common/gestfich.cpp:306 eeschema/eeschema.cpp:608 eeschema/eeschema.cpp:643
#: gerbview/gerbview.cpp:247 kicad/project_template.cpp:308
#: pcbnew/pcbnew.cpp:581
#, c-format
msgid "Cannot copy file '%s'."
msgstr "파일 '%s'을(를) 복사할 수 없습니다."

#: common/gestfich.cpp:327
msgid "Invalid directory name, cannot remove root"
msgstr "잘못된 디렉토리 이름, root를 제거 할 수 없음"

#: common/gestfich.cpp:335
#, c-format
msgid "Directory '%s' does not exist"
msgstr "디렉토리 '%s'가 없음"

#: common/gestfich.cpp:345
#, c-format
msgid "'%s' is not a directory"
msgstr "'%s'는 디렉토리가 아님"

#: common/gestfich.cpp:357
#, c-format
msgid "Error removing directory '%s': %s"
msgstr "'%s' 디렉터리 제거 오류: %s"

#: common/git/git_clone_handler.cpp:49
#, c-format
msgid "Could not create directory '%s'"
msgstr "디렉토리 '%s'를 만들 수 없음"

#: common/git/git_clone_handler.cpp:66
#, c-format
msgid "Could not clone repository '%s'"
msgstr "저장소 '%s'를 복제할 수 없음"

#: common/git/git_pull_handler.cpp:46
#, c-format
msgid "Could not lookup remote '%s'"
msgstr "원격 '%s'를 조회할 수 없음"

#: common/git/git_pull_handler.cpp:59
#, c-format
msgid "Could not connect to remote '%s'"
msgstr "원격 '%s'에 연결할 수 없음"

#: common/git/git_pull_handler.cpp:69
#, c-format
msgid "Could not fetch data from remote '%s'"
msgstr "원격 '%s'에서 데이터를 가져올 수 없음"

#: common/git/git_pull_handler.cpp:90
msgid "Could not read 'FETCH_HEAD'"
msgstr "'FETCH_HEAD'를 읽을 수 없음"

#: common/git/git_pull_handler.cpp:98
msgid "Could not lookup commit"
msgstr "커밋을 조회할 수 없음"

#: common/git/git_pull_handler.cpp:108
msgid "Could not analyze merge"
msgstr "병합을 분석할 수 없음"

#: common/git/git_pull_handler.cpp:118
msgid "Invalid HEAD.  Cannot merge."
msgstr "잘못된 HEAD.  병합할 수 없음."

#: common/git/git_pull_handler.cpp:177
msgid "Could not get repository head"
msgstr "저장소 헤드를 가져올 수 없음"

#: common/git/git_pull_handler.cpp:187
#, c-format
msgid "Could not get reference OID for reference '%s'"
msgstr "참조 '%s'에 대한 참조 OID를 가져올 수 없음"

#: common/git/git_pull_handler.cpp:195 common/git/kicad_git_errors.cpp:54
msgid "Failed to perform checkout operation."
msgstr "체크아웃 작업을 수행하지 못함."

#: common/git/git_pull_handler.cpp:212
msgid "Could not lookup commit '{}'"
msgstr "커밋 '{}'를 조회할 수 없음"

#: common/git/git_pull_handler.cpp:249
msgid "Could not merge commits"
msgstr "커밋을 병합할 수 없음"

#: common/git/git_pull_handler.cpp:257
msgid "Could not get repository index"
msgstr "저장소 인덱스를 가져올 수 없음"

#: common/git/git_pull_handler.cpp:265
msgid "Could not get conflict iterator"
msgstr "충돌 처리기를 가져올 수 없음"

#: common/git/git_pull_handler.cpp:285 common/git/git_pull_handler.cpp:286
msgid "Changed"
msgstr "변경됨"

#: common/git/git_pull_handler.cpp:300 common/git/git_pull_handler.cpp:301
msgid "Added"
msgstr "추가됨"

#: common/git/git_push_handler.cpp:44
msgid "Could not lookup remote"
msgstr "원격을 조회할 수 없음"

#: common/git/git_push_handler.cpp:58
msgid "Could not connect to remote"
msgstr "원격에 연결할 수 없음"

#: common/git/git_push_handler.cpp:68
msgid "Could not push to remote"
msgstr "원격으로 푸시하지 못함"

#: common/git/kicad_git_common.cpp:419
#, c-format
msgid "Received %u of %u objects"
msgstr "%u 수신 %u 개체"

#: common/git/kicad_git_common.cpp:446
#, c-format
msgid "* [updated] %s..%s %s"
msgstr "* [업데이트됨] %s..%s %s"

#: common/git/kicad_git_common.cpp:450
#, c-format
msgid "* [new] %s %s"
msgstr "* [신규] %s %s"

#: common/git/kicad_git_common.cpp:470
#, c-format
msgid "Writing objects: %d%% (%d/%d), %d bytes"
msgstr "개체 쓰기: %d%% (%d/%d), %d 바이트"

#: common/git/kicad_git_common.cpp:485
#, c-format
msgid "* [rejected] %s (%s)"
msgstr "* [거절] %s (%s)"

#: common/git/kicad_git_common.cpp:490
#, c-format
msgid "[updated] %s"
msgstr "[업데이트됨] %s"

#: common/git/kicad_git_errors.cpp:39
msgid "Invalid repository."
msgstr "잘못된 저장소 이름."

#: common/git/kicad_git_errors.cpp:40
msgid "Failed to commit changes."
msgstr "변경 내용을 커밋하지 못함."

#: common/git/kicad_git_errors.cpp:41
msgid "Failed to merge branches."
msgstr "브랜치 병합에 실패함."

#: common/git/kicad_git_errors.cpp:44
msgid "Failed to clone repository."
msgstr "저장소 복제에 실패함."

#: common/git/kicad_git_errors.cpp:45
msgid "Remote repository not found."
msgstr "원격 저장소를 찾을 수 없음."

#: common/git/kicad_git_errors.cpp:46
msgid "Authentication failed for remote repository."
msgstr "원격 저장소에 대한 인증에 실패했습니다."

#: common/git/kicad_git_errors.cpp:49
msgid "Branch not found."
msgstr "분기를 찾을 수 없음."

#: common/git/kicad_git_errors.cpp:50
msgid "Failed to create branch."
msgstr "분기를 만들지 못함."

#: common/git/kicad_git_errors.cpp:51
msgid "Failed to delete branch."
msgstr "분기를 삭제하지 못함."

#: common/git/kicad_git_errors.cpp:55
msgid "File not found during checkout operation."
msgstr "체크아웃 작업 중에 파일을 찾을 수 없습니다."

#: common/git/kicad_git_errors.cpp:58
msgid "Merge conflict encountered."
msgstr "병합 충돌이 발생했습니다."

#: common/git/kicad_git_errors.cpp:59
msgid "Rebase conflict encountered."
msgstr "리베이스 충돌이 발생했습니다."

#: common/git/kicad_git_errors.cpp:62
msgid "Failed to pull changes from remote repository."
msgstr "원격 저장소에서 변경 내용을 가져오지 못함."

#: common/git/kicad_git_errors.cpp:63
msgid "Failed to push changes to remote repository."
msgstr "원격 저장소에 변경 내용을 푸시하지 못함."

#: common/git/kicad_git_errors.cpp:64
msgid "No upstream branch configured."
msgstr "업스트림 분기가 구성되지 않았습니다."

#: common/git/kicad_git_errors.cpp:65
msgid "Failed to establish connection with remote repository."
msgstr "원격 저장소에 연결하지 못함."

#: common/git/kicad_git_errors.cpp:68
msgid "Tag not found."
msgstr "태그를 찾을 수 없음."

#: common/git/kicad_git_errors.cpp:69
msgid "Failed to create tag."
msgstr "태그를 생성하지 못함."

#: common/git/kicad_git_errors.cpp:70
msgid "Failed to delete tag."
msgstr "태그 삭제에 실패함."

#: common/git/kicad_git_errors.cpp:72
msgid "Unknown error."
msgstr "알 수 없는 오류."

#: common/git/kicad_git_errors.cpp:73
msgid "No error."
msgstr "오류 없음."

#: common/git/kicad_git_errors.h:45 common/git/kicad_git_errors.h:53
msgid "No error"
msgstr "오류 없음"

#: common/grid_tricks.cpp:354 common/tool/actions.cpp:202
#: eeschema/tools/ee_actions.cpp:214 pcbnew/dialogs/panel_setup_rules.cpp:128
#: pcbnew/tools/edit_tool.cpp:2251
msgid "Cut"
msgstr "자르기"

#: common/grid_tricks.cpp:355
msgid "Clear selected cells placing original contents on clipboard"
msgstr "클립보드에 원본 콘텐츠를 배치하여 선택한 셀 지우기"

#: common/grid_tricks.cpp:356 common/tool/actions.cpp:213
#: eeschema/tools/ee_actions.cpp:220 pcbnew/dialogs/panel_setup_rules.cpp:129
msgid "Copy"
msgstr "복사"

#: common/grid_tricks.cpp:357
msgid "Copy selected cells to clipboard"
msgstr "선택한 셀을 클립보드에 복사"

#: common/grid_tricks.cpp:358 common/tool/actions.cpp:224
#: eeschema/tools/sch_editor_control.cpp:2188
#: eeschema/tools/symbol_editor_edit_tool.cpp:863
#: pcbnew/dialogs/panel_setup_rules.cpp:130 pcbnew/tools/pcb_control.cpp:1033
msgid "Paste"
msgstr "붙여넣기"

#: common/grid_tricks.cpp:359
msgid "Paste clipboard cells to matrix at current cell"
msgstr "현재 셀의 행렬에 클립보드 셀 붙여넣기"

#: common/grid_tricks.cpp:360 common/tool/actions.cpp:269
#: eeschema/tools/sch_edit_tool.cpp:1430
#: eeschema/tools/symbol_editor_edit_tool.cpp:357
#: kicad/project_tree_pane.cpp:918 pcbnew/dialogs/panel_setup_rules.cpp:131
#: pcbnew/tools/edit_tool.cpp:2253
msgid "Delete"
msgstr "삭제"

#: common/grid_tricks.cpp:361
msgid "Clear contents of selected cells"
msgstr "선택한 셀의 내용 지우기"

#: common/grid_tricks.cpp:362 common/tool/actions.cpp:234
#: eeschema/dialogs/dialog_change_symbols_base.cpp:106
#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:74
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:47
#: pcbnew/dialogs/dialog_import_settings.cpp:49
#: pcbnew/dialogs/dialog_import_settings.cpp:98
#: pcbnew/dialogs/dialog_import_settings_base.cpp:92
#: pcbnew/dialogs/panel_setup_rules.cpp:135
msgid "Select All"
msgstr "모두 선택"

#: common/grid_tricks.cpp:363
msgid "Select all cells"
msgstr "모든 셀 선택"

#: common/hotkey_store.cpp:43
msgid "Pan Left/Right"
msgstr "왼쪽/오른쪽 이동"

#: common/hotkey_store.cpp:44
msgid "Pan Up/Down"
msgstr "위/아래로 이동"

#: common/hotkey_store.cpp:45
msgid "Finish Drawing"
msgstr "그리기 완료"

#: common/hotkey_store.cpp:46
msgid "Add to Selection"
msgstr "선택 항목에 추가"

#: common/hotkey_store.cpp:47 eeschema/tools/ee_actions.cpp:825
#: gerbview/tools/gerbview_actions.cpp:137
#: gerbview/tools/gerbview_actions.cpp:138 pcbnew/tools/pcb_actions.cpp:1240
#: pcbnew/tools/pcb_actions.cpp:1271
msgid "Highlight Net"
msgstr "네트 강조"

#: common/hotkey_store.cpp:48
msgid "Remove from Selection"
msgstr "선택에서 제거"

#: common/hotkey_store.cpp:49
msgid "Ignore Grid Snaps"
msgstr "그리드 스냅 무시"

#: common/hotkey_store.cpp:50
msgid "Ignore Other Snaps"
msgstr "다른 스냅 무시"

#: common/hotkey_store.cpp:57 common/tool/action_menu.cpp:230
#: common/tool/action_menu.cpp:246 common/tool/actions.cpp:136
msgid "Quit"
msgstr "종료"

#: common/hotkey_store.cpp:72
msgid "Project Manager"
msgstr "프로젝트 매니저"

#: common/hotkey_store.cpp:155
msgid "Gestures"
msgstr "제스처"

#: common/http_lib/http_lib_connection.cpp:73
msgid "KiCad received an empty response!"
msgstr "KiCad가 빈 응답을 받음!"

#: common/http_lib/http_lib_connection.cpp:89
#: common/http_lib/http_lib_connection.cpp:154
#: common/http_lib/http_lib_connection.cpp:284
#: common/http_lib/http_lib_connection.cpp:356
#, c-format
msgid "Error: %s"
msgstr "오류: %s"

#: common/http_lib/http_lib_connection.cpp:89
#: common/http_lib/http_lib_connection.cpp:154
#: common/http_lib/http_lib_connection.cpp:284
#: common/http_lib/http_lib_connection.cpp:356
#, c-format
msgid "API Response:  %s"
msgstr "API 응답: %s"

#: common/http_lib/http_lib_connection.cpp:374
#, c-format
msgid "API responded with error code: %s"
msgstr "API가 오류 코드로 응답: %s"

#: common/import_gfx/dxf_import_plugin.cpp:134
#: common/import_gfx/dxf_import_plugin.cpp:154
msgid "Memory was exhausted trying to load the DXF, it may be too large."
msgstr ""
"메모리가 부족하여 DXF 파일을 로드할 수 없습니다. 파일이 너무 클 수 있습니다."

#: common/import_gfx/dxf_import_plugin.cpp:1432
msgid "Invalid spline definition encountered"
msgstr "잘못된 스플라인 정의가 발견됨"

#: common/import_gfx/dxf_import_plugin.h:210
#, c-format
msgid "%s is not supported."
msgstr "%s는 지원되지 않음."

#: common/import_gfx/dxf_import_plugin.h:458
#: common/import_gfx/dxf_import_plugin.h:462
msgid "DXF construction lines not currently supported."
msgstr "현재 지원되지 않는 DXF 구성선."

#: common/import_gfx/dxf_import_plugin.h:467
msgid "DXF arc-aligned text not currently supported."
msgstr "현재 지원되지 않는 DXF 호 정렬 텍스트."

#: common/import_gfx/dxf_import_plugin.h:472
#: common/import_gfx/dxf_import_plugin.h:476
#: common/import_gfx/dxf_import_plugin.h:480
#: common/import_gfx/dxf_import_plugin.h:484
#: common/import_gfx/dxf_import_plugin.h:488
#: common/import_gfx/dxf_import_plugin.h:492
#: common/import_gfx/dxf_import_plugin.h:496
#: common/import_gfx/dxf_import_plugin.h:500
msgid "DXF dimensions not currently supported."
msgstr "현재 지원되지 않는 DXF 치수."

#: common/import_gfx/dxf_import_plugin.h:506
msgid "DXF hatches not currently supported."
msgstr "현재 DXF 해치는 지원되지 않음."

#: common/import_gfx/dxf_import_plugin.h:513
msgid "DXF traces not currently supported."
msgstr "현재 지원되지 않는 DXF 트레이스."

#: common/import_gfx/dxf_import_plugin.h:518
msgid "DXF 3dfaces not currently supported."
msgstr "현재 DXF 3차원 면은 지원되지 않음."

#: common/import_gfx/dxf_import_plugin.h:523
msgid "DXF solids not currently supported."
msgstr "현재 DXF 솔리드는 지원되지 않음."

#: common/import_gfx/dxf_import_plugin.h:528
msgid "DXF images not currently supported."
msgstr "현재 지원되지 않는 DXF 이미지."

#: common/io/altium/altium_parser.cpp:56 common/richio.cpp:121
#, c-format
msgid "Cannot open file '%s'."
msgstr "'%s' 파일을 열 수 없습니다."

#: common/io/altium/altium_parser.cpp:65
msgid "Error reading file: cannot determine length."
msgstr "파일을 읽는 중에 오류가 발생하였습니다: 길이를 측정할 수 없습니다."

#: common/io/altium/altium_parser.cpp:78
msgid "Error reading file."
msgstr "파일을 읽는 중에 오류가 발생하였습니다."

#: common/io/altium/altium_parser.cpp:425
msgid ""
"Missing null byte at end of property list. Imported data might be malformed "
"or missing."
msgstr ""
"속성 목록 끝에 null 바이트가 없습니다. 가져온 데이터의 형식이 잘못되었거나 누"
"락되었을 수 있습니다."

#: common/io/altium/altium_parser.cpp:566
#, c-format
msgid "Unit '%s' does not end with 'mil'."
msgstr "단위 '%s'이(가) 'mil'로 끝나지 않습니다."

#: common/io/altium/altium_parser.cpp:576
#, c-format
msgid "Cannot convert '%s' to double."
msgstr "'%s'을(를) double로 변환할 수 없습니다."

#: common/io/cadstar/cadstar_archive_parser.cpp:2469
#, c-format
msgid "Cannot open file '%s'"
msgstr "'%s' 파일을 열 수 없음"

#: common/io/cadstar/cadstar_archive_parser.cpp:2491
#: common/io/cadstar/cadstar_archive_parser.cpp:2823
msgid "File import cancelled by user."
msgstr "사용자가 파일 가져오기를 취소했습니다."

#: common/io/cadstar/cadstar_archive_parser.cpp:2509
#: common/io/cadstar/cadstar_archive_parser.cpp:2532
#: common/io/cadstar/cadstar_archive_parser.cpp:2550
#: common/io/cadstar/cadstar_archive_parser.cpp:2558
#: common/io/cadstar/cadstar_archive_parser.cpp:2569
msgid "The selected file is not valid or might be corrupt!"
msgstr "선택한 파일이 유효하지 않거나 손상되었을 수 있습니다!"

#: common/io/cadstar/cadstar_archive_parser.cpp:2676
#, c-format
msgid "Unexpected number of points in '%s'. Found %d but expected %d."
msgstr ""
"'%s'에 예기치 않은 포인트 개수가 있습니다. %d을(를) 찾았지만 %d이(가) 필요합"
"니다."

#: common/io/cadstar/cadstar_archive_parser.h:43
#, c-format
msgid "Missing node '%s' in '%s'"
msgstr "노드 '%s'이(가) '%s'에 없음"

#: common/io/cadstar/cadstar_archive_parser.h:46
#, c-format
msgid "Unknown node '%s' in '%s'"
msgstr "알 수 없는 노드 '%s'이(가) '%s'에 있음"

#: common/io/cadstar/cadstar_archive_parser.h:49
#, c-format
msgid "Missing Parameter '%s' in '%s'"
msgstr "매개변수 '%s'이(가) '%s'에 없음"

#: common/io/cadstar/cadstar_archive_parser.h:52
#, c-format
msgid "Unknown Parameter '%s' in '%s'"
msgstr "알 수 없는 매개변수 '%s'이(가) '%s' 에 있음"

#: common/io/cadstar/cadstar_archive_parser.h:55
#, c-format
msgid "Unable to parse '%s' in '%s'"
msgstr "구문 분석 할 수 없는 '%s'이(가) '%s'에 있음"

#: common/io/eagle/eagle_parser.cpp:249
#, c-format
msgid "Invalid size %lld: too large"
msgstr "잘못된 크기 %lld: 너무 큼"

#: common/io/eagle/eagle_parser.cpp:410
#, c-format
msgid "Invalid Arc with radius %f and angle %f"
msgstr "반경이 %f이고 각도가 %f인 잘못된 호"

#: common/io/easyeda/easyeda_parser_base.cpp:37
#, c-format
msgid "Failed to parse number from '%s'"
msgstr "'%s'에서 숫자를 해석하지 못함"

#: common/io/easyedapro/easyedapro_import_utils.cpp:165
#, c-format
msgid ""
"'%s' does not appear to be a valid EasyEDA (JLCEDA) Pro project or library "
"file. Cannot find project.json or device.json."
msgstr ""
"'%s'는 유효한 EasyEDA(JLCEDA) Pro 프로젝트 또는 라이브러리 파일이 아닙니다. "
"project.json 또는 device.json을 찾을 수 없음."

#: common/io/easyedapro/easyedapro_import_utils.cpp:181
#, c-format
msgid "Cannot read ZIP archive '%s'"
msgstr "ZIP 압축 파일 '%s'를 읽을 수 없음"

#: common/io/easyedapro/easyedapro_import_utils.cpp:197
#, c-format
msgid "JSON error reading '%s': %s"
msgstr "JSON 읽기 오류 '%s': %s"

#: common/io/easyedapro/easyedapro_import_utils.cpp:201
#, c-format
msgid "Error reading '%s': %s"
msgstr "'%s' 읽기 오류: %s"

#: common/io/easyedapro/easyedapro_import_utils.cpp:224
#, c-format
msgid "Cannot parse JSON line %d in '%s': %s"
msgstr "JSON 행 %d를 '%s'에서 구문 분석할 수 없음: %s"

#: common/kiway.cpp:243
#, c-format
msgid "Failed to verify kiface library '%s' signature."
msgstr "kiface 라이브러리 '%s' 서명을 확인하지 못했습니다."

#: common/kiway.cpp:283
#, c-format
msgid "Failed to load kiface library '%s'."
msgstr "kiface 라이브러리 '%s'을(를) 불러오기 실패하였습니다."

#: common/kiway.cpp:291
#, c-format
msgid "Could not read instance name and version from kiface library '%s'."
msgstr "kiface 라이브러리 '%s'에서 인스턴스 이름과 버전을 읽을 수 없습니다."

#: common/kiway.cpp:347
#, c-format
msgid ""
"Fatal Installation Bug. File:\n"
"'%s'\n"
"could not be loaded\n"
msgstr ""
"치명적인 설치 버그. 파일:\n"
"\"%s\"\n"
"불러올 수 없음\n"

#: common/kiway.cpp:351
msgid "It is missing.\n"
msgstr "누락되었습니다.\n"

#: common/kiway.cpp:353
msgid "Perhaps a shared library (.dll or .so) file is missing.\n"
msgstr "공유 라이브러리 (.dll 또는 .so) 파일이 누락된것 같습니다.\n"

#: common/kiway.cpp:355
msgid ""
"From command line: argv[0]:\n"
"'"
msgstr ""
"명령줄에서: argv[0]:\n"
"'"

#: common/kiway.cpp:488
msgid "Error loading editor."
msgstr "편집기를 불러오는 중에 오류가 발생했습니다."

#: common/kiway.cpp:600
#, c-format
msgid "Unable to switch language to %s"
msgstr "언어를 %s(으)로 전환할 수 없음"

#: common/layer_id.cpp:35 pcbnew/drc/drc_engine.cpp:960
#: pcbnew/drc/drc_engine.cpp:961 pcbnew/drc/drc_engine.cpp:962
#: pcbnew/tools/board_inspection_tool.cpp:250
#: pcbnew/tools/board_inspection_tool.cpp:259
#: pcbnew/tools/board_inspection_tool.cpp:268
msgid "undefined"
msgstr "정의되지 않음"

#: common/layer_id.cpp:107
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:1095
msgid "Rescue"
msgstr "복구"

#: common/layer_id.cpp:111
msgid "Wires"
msgstr "배선"

#: common/layer_id.cpp:112
msgid "Buses"
msgstr "버스"

#: common/layer_id.cpp:113
msgid "Bus junctions"
msgstr "버스 접합부"

#: common/layer_id.cpp:114
msgid "Junctions"
msgstr "접합부"

#: common/layer_id.cpp:115 eeschema/widgets/search_handlers.cpp:298
msgid "Labels"
msgstr "라벨"

#: common/layer_id.cpp:116
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:45
msgid "Global labels"
msgstr "전역 라벨"

#: common/layer_id.cpp:117
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:48
msgid "Hierarchical labels"
msgstr "계층구조 라벨"

#: common/layer_id.cpp:118 eeschema/sch_symbol.cpp:2686
msgid "Pin numbers"
msgstr "핀 번호"

#: common/layer_id.cpp:119 eeschema/sch_symbol.cpp:2691
msgid "Pin names"
msgstr "핀 이름"

#: common/layer_id.cpp:120
msgid "Symbol references"
msgstr "심볼 참조"

#: common/layer_id.cpp:121
msgid "Symbol values"
msgstr "심볼 값"

#: common/layer_id.cpp:122
msgid "Symbol fields"
msgstr "심볼 필드"

#: common/layer_id.cpp:123
msgid "Sheet references"
msgstr "시트 참조"

#: common/layer_id.cpp:124
msgid "Net class references"
msgstr "네트 클래스 참조"

#: common/layer_id.cpp:125
msgid "Symbol body outlines"
msgstr "심볼 본체 외곽선"

#: common/layer_id.cpp:126
msgid "Symbol body fills"
msgstr "심볼 본체 채우기"

#: common/layer_id.cpp:127
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:72
msgid "Schematic text && graphics"
msgstr "회로도 텍스트 및 그래픽"

#: common/layer_id.cpp:128
msgid "Symbol private text && graphics"
msgstr "회로도 개인 텍스트 및 그래픽"

#: common/layer_id.cpp:129
msgid "Schematic text && graphics backgrounds"
msgstr "회로도 텍스트 및 그래픽 배경"

#: common/layer_id.cpp:130
msgid "Pins"
msgstr "핀"

#: common/layer_id.cpp:131
msgid "Sheet borders"
msgstr "시트 테두리"

#: common/layer_id.cpp:132
msgid "Sheet backgrounds"
msgstr "시트 배경"

#: common/layer_id.cpp:133
msgid "Sheet names"
msgstr "시트 이름"

#: common/layer_id.cpp:134
msgid "Sheet fields"
msgstr "시트 필드"

#: common/layer_id.cpp:135
msgid "Sheet file names"
msgstr "시트 파일 이름"

#: common/layer_id.cpp:136
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:63
msgid "Sheet pins"
msgstr "시트 핀"

#: common/layer_id.cpp:137
msgid "No-connect symbols"
msgstr "미연결 심볼"

#: common/layer_id.cpp:138
msgid "DNP markers"
msgstr "DNP 표시"

#: common/layer_id.cpp:139
msgid "ERC warnings"
msgstr "ERC 경고"

#: common/layer_id.cpp:140
msgid "ERC errors"
msgstr "ERC 오류"

#: common/layer_id.cpp:141
msgid "ERC exclusions"
msgstr "ERC 제외"

#: common/layer_id.cpp:142 common/layer_id.cpp:182
#: pcbnew/widgets/appearance_controls.cpp:346
msgid "Anchors"
msgstr "앵커"

#: common/layer_id.cpp:143 common/layer_id.cpp:186
msgid "Helper items"
msgstr "도우미 항목"

#: common/layer_id.cpp:144 common/layer_id.cpp:187 common/tool/grid_menu.cpp:64
#: eeschema/tools/sch_editor_control.cpp:2631
#: gerbview/dialogs/panel_gerbview_color_settings.cpp:102
#: gerbview/widgets/gerbview_layer_widget.cpp:134
#: pcbnew/widgets/appearance_controls.cpp:350
msgid "Grid"
msgstr "그리드"

#: common/layer_id.cpp:145
#: gerbview/dialogs/panel_gerbview_color_settings.cpp:103
msgid "Axes"
msgstr "축"

#: common/layer_id.cpp:146 common/layer_id.cpp:189
#: gerbview/dialogs/panel_gerbview_color_settings.cpp:106
#: gerbview/widgets/gerbview_layer_widget.cpp:140
msgid "Background"
msgstr "배경"

#: common/layer_id.cpp:147 common/layer_id.cpp:185
#: common/widgets/gal_options_panel_base.cpp:120
#: eeschema/sim/simulator_frame_ui.cpp:595
#: eeschema/sim/simulator_frame_ui_base.cpp:167
msgid "Cursor"
msgstr "커서"

#: common/layer_id.cpp:148
msgid "Hovered items"
msgstr "호버링된 항목"

#: common/layer_id.cpp:149
msgid "Highlighted items"
msgstr "강조 표시된 항목"

#: common/layer_id.cpp:150
msgid "Hidden items"
msgstr "숨겨진 항목"

#: common/layer_id.cpp:151 common/layer_id.cpp:190
msgid "Selection highlight"
msgstr "선택 강조"

#: common/layer_id.cpp:152 common/layer_id.cpp:183
msgid "Drawing sheet"
msgstr "도면 시트"

#: common/layer_id.cpp:153 common/layer_id.cpp:184
msgid "Page limits"
msgstr "페이지 제한"

#: common/layer_id.cpp:154
msgid "Operating point voltages"
msgstr "동작점 전압"

#: common/layer_id.cpp:155
msgid "Operating point currents"
msgstr "동작점 전류"

#: common/layer_id.cpp:159
msgid "Footprints front"
msgstr "전면의 풋프린트"

#: common/layer_id.cpp:160
msgid "Footprints back"
msgstr "후면의 풋프린트"

#: common/layer_id.cpp:162
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:27
#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:53
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:28
msgid "Reference designators"
msgstr "참조 지정자"

#: common/layer_id.cpp:163
msgid "Footprint text"
msgstr "풋프린트 텍스트"

#: common/layer_id.cpp:164
msgid "Hidden text"
msgstr "숨겨진 텍스트"

#: common/layer_id.cpp:165
msgid "SMD pads front"
msgstr "전면의 SMD 패드"

#: common/layer_id.cpp:166
msgid "SMD pads back"
msgstr "후면의 SMD 패드"

#: common/layer_id.cpp:167
msgid "Through-hole pads"
msgstr "스루홀 패드"

#: common/layer_id.cpp:168
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:27
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:64
#: pcbnew/widgets/appearance_controls.cpp:327
#: pcbnew/widgets/panel_selection_filter.cpp:188
#: pcbnew/widgets/panel_selection_filter_base.cpp:37
msgid "Tracks"
msgstr "배선"

#: common/layer_id.cpp:169
msgid "Through vias"
msgstr "관통 비아"

#: common/layer_id.cpp:170
msgid "Blind/Buried vias"
msgstr "블라인드/ 매립 비아"

#: common/layer_id.cpp:171
msgid "Micro-vias"
msgstr "마이크로 비아"

#: common/layer_id.cpp:172
msgid "Via holes"
msgstr "비아 홀"

#: common/layer_id.cpp:173
msgid "Via hole walls"
msgstr "비아 홀 벽"

#: common/layer_id.cpp:174
msgid "Plated holes"
msgstr "도금된 홀"

#: common/layer_id.cpp:175
msgid "Plated hole walls"
msgstr "도금된 홀 벽"

#: common/layer_id.cpp:176
msgid "Non-plated holes"
msgstr "비도금 홀"

#: common/layer_id.cpp:177 pcbnew/dialogs/panel_edit_options_base.cpp:340
#: pcbnew/widgets/appearance_controls.cpp:342
#: pcbnew/widgets/appearance_controls.cpp:717
#: pcbnew/widgets/appearance_controls.cpp:2478
#: pcbnew/widgets/search_handlers.cpp:350
msgid "Ratsnest"
msgstr "연결선"

#: common/layer_id.cpp:178
msgid "DRC warnings"
msgstr "DRC 경고"

#: common/layer_id.cpp:179
msgid "DRC errors"
msgstr "DRC 오류"

#: common/layer_id.cpp:180
msgid "DRC exclusions"
msgstr "DRC 제외"

#: common/layer_id.cpp:181
msgid "DRC marker shadows"
msgstr "DRC 마커 그림자"

#: common/layer_id.cpp:188
msgid "Grid axes"
msgstr "그리드 축"

#: common/layer_id.cpp:191
msgid "Locked item shadow"
msgstr "잠긴 항목"

#: common/layer_id.cpp:192
msgid "Courtyard collision shadow"
msgstr "부품자리 겹침 그림자"

#: common/lib_id.cpp:145
#, fuzzy
msgid "Illegal character found in library nickname"
msgstr "논리 라이브러리 이름에 잘못된 문자가 있음"

#: common/lib_table_grid_tricks.cpp:32
msgid "Edit options..."
msgstr "편집 옵션..."

#: common/lib_table_grid_tricks.cpp:33
msgid "Edit options for this library entry"
msgstr "이 라이브러리 항목의 옵션 편집"

#: common/lib_table_grid_tricks.cpp:63
msgid "Activate selected"
msgstr "선택대상 활성화"

#: common/lib_table_grid_tricks.cpp:66
msgid "Deactivate selected"
msgstr "선택대상 비활성화"

#: common/lib_table_grid_tricks.cpp:69
msgid "Set visible flag"
msgstr "표시 플래그 설정"

#: common/lib_table_grid_tricks.cpp:72
msgid "Unset visible flag"
msgstr "표시 플래그 설정 해제"

#: common/lib_table_grid_tricks.cpp:80
#, c-format
msgid "Library settings for %s..."
msgstr "%s에 대한 라이브러리 설정…"

#: common/lib_tree_model.cpp:149
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:131
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:99
#: eeschema/dialogs/dialog_sim_model.cpp:591 eeschema/lib_item.cpp:77
#: eeschema/sch_pin.cpp:245 eeschema/sch_symbol.cpp:2705
#: eeschema/symbol_editor/symbol_editor.cpp:1278
msgid "Unit"
msgstr "유닛"

#: common/lib_tree_model_adapter.cpp:134 common/lib_tree_model_adapter.cpp:137
#: common/lib_tree_model_adapter.cpp:147 common/lib_tree_model_adapter.cpp:149
#: common/lib_tree_model_adapter.cpp:150
msgid "Item"
msgstr "항목"

#: common/libeval_compiler/libeval_compiler.cpp:585
#, c-format
msgid "Unrecognized character '%c'"
msgstr "인식할 수 없는 문자 '%c'"

#: common/libeval_compiler/libeval_compiler.cpp:846
msgid "Unknown parent of function parameters"
msgstr "함수 매개변수의 알 수 없는 상위 항목"

#: common/libeval_compiler/libeval_compiler.cpp:865
msgid "Unknown parent of property"
msgstr "알 수 없는 속성의 상위 항목"

#: common/libeval_compiler/libeval_compiler.cpp:888
#: common/libeval_compiler/libeval_compiler.cpp:918
#: common/libeval_compiler/libeval_compiler.cpp:992
#: common/libeval_compiler/libeval_compiler.cpp:1065
#, c-format
msgid "Unrecognized item '%s'"
msgstr "인식할 수 없는 항목 '%s'"

#: common/libeval_compiler/libeval_compiler.cpp:894
#: common/libeval_compiler/libeval_compiler.cpp:997
#, c-format
msgid "Unrecognized property '%s'"
msgstr "인식할 수 없는 속성 '%s'"

#: common/libeval_compiler/libeval_compiler.cpp:931
#, c-format
msgid "Unrecognized function '%s'"
msgstr "인식할 수 없는 함수 '%s'"

#: common/libeval_compiler/libeval_compiler.cpp:1024
#, c-format
msgid "Unexpected units for '%s'"
msgstr "예기치 않은 단위 '%s'"

#: common/libeval_compiler/libeval_compiler.cpp:1036
#, c-format
msgid "Missing units for '%s'| (%s)"
msgstr "'%s'에 대한 단위 누락| (%s)"

#: common/libeval_compiler/libeval_compiler.cpp:1156
#, c-format
msgid "Type mismatch between '%s' and %lf"
msgstr "'%s'와 %lf 간의 유형 불일치"

#: common/libeval_compiler/libeval_compiler.cpp:1162
#, c-format
msgid "Type mismatch between %lf and '%s'"
msgstr "%lf와 '%s' 간의 유형 불일치"

#: common/notifications_manager.cpp:90
#: kicad/dialogs/dialog_update_notice_base.cpp:63
msgid "View Details"
msgstr "상세 정보 보기"

#: common/notifications_manager.cpp:95
msgid "Dismiss"
msgstr "닫기"

#: common/notifications_manager.cpp:155
msgid "Notifications"
msgstr "알림"

#: common/notifications_manager.cpp:175
msgid "There are no notifications available"
msgstr "사용 가능한 알림이 없음"

#: common/pgm_base.cpp:208
msgid "No default editor found, you must choose one."
msgstr "기본 편집기를 선택해야 합니다."

#: common/pgm_base.cpp:228 common/pgm_base.cpp:230
msgid "Executable file"
msgstr "실행 파일"

#: common/pgm_base.cpp:240
msgid "Select Preferred Editor"
msgstr "선호하는 편집기 선택"

#: common/pgm_base.cpp:377
msgid ""
"KiCad can anonymously report crashes and special event data to developers in "
"order to aid identifying critical bugs across the user base more effectively "
"and help profile functionality to guide improvements. \n"
"If you choose to voluntarily participate, KiCad will automatically handle "
"sending said reports when crashes or events occur. \n"
"Your design files such as schematic or PCB are not shared in this process."
msgstr ""
"KiCad는 충돌 및 특별 이벤트 데이터를 개발자에게 익명으로 보고하여 사용자 기"
"반 전반에서 중요한 버그를 보다 효과적으로 식별하고 개선 사항을 안내하는 기능"
"을 프로파일링하는 데 도움을 줄 수 있습니다. \n"
"자발적으로 참여하기로 선택한 경우, KiCad는 충돌이나 이벤트가 발생할 때 해당 "
"보고서 전송을 자동으로 처리합니다. \n"
"회로도 또는 PCB와 같은 설계 파일은 이 프로세스에서 공유되지 않습니다."

#: common/pgm_base.cpp:384
msgid "Data collection opt in request"
msgstr "데이터 수집 동의 요청"

#: common/pgm_base.cpp:488
msgid "Environment variable HOME is empty.  Unable to continue."
msgstr "환경 변수 HOME이 비어 있습니다. 계속할 수 없습니다."

#: common/pgm_base.cpp:697
msgid "This language is not supported by the operating system."
msgstr "이 언어는 운영 체제에서 지원하지 않습니다."

#: common/pgm_base.cpp:748 common/pgm_base.cpp:789
msgid "The KiCad language file for this language is not installed."
msgstr "이 언어에 대한 KiCad 언어 파일이 설치되어 있지 않습니다."

#: common/plotters/PDF_plotter.cpp:880
#, c-format
msgid "Page %s"
msgstr "페이지 %s"

#: common/plotters/PDF_plotter.cpp:884
#, c-format
msgid "%s (Page %s)"
msgstr "%s (페이지 %s)"

#: common/plotters/PDF_plotter.cpp:1361
#, c-format
msgid "Show Page %s"
msgstr "페이지 표시 %s"

#: common/plotters/PDF_plotter.cpp:1372
#: eeschema/symbol_editor/symbol_edit_frame.cpp:851
#: eeschema/tools/sch_navigate_tool.cpp:87
#, c-format
msgid "Open %s"
msgstr "열기 %s"

#: common/project.cpp:366 common/project.cpp:371 pcbnew/project_pcb.cpp:69
msgid "Error loading project footprint library table."
msgstr ""
"프로젝트 풋프린트 라이브러리 테이블을 불러오는 동안 오류가 발생했습니다."

#: common/project/net_settings.cpp:61 pcbnew/board.cpp:118
msgid "This is the default net class."
msgstr "이것은 기본 네트 클래스입니다."

#: common/project/project_archiver.cpp:53 kicad/pcm/pcm_task_manager.cpp:329
msgid "Could not open archive file."
msgstr "보관된 파일을 열 수 없음."

#: common/project/project_archiver.cpp:62 kicad/pcm/pcm_task_manager.cpp:337
msgid "Invalid archive file format."
msgstr "잘못된 보관 파일 형식."

#: common/project/project_archiver.cpp:73
#, c-format
msgid "Extracting file '%s'."
msgstr "'%s' 파일을 추출하는 중."

#: common/project/project_archiver.cpp:96 kicad/pcm/pcm_task_manager.cpp:251
#: kicad/pcm/pcm_task_manager.cpp:294
msgid "Error extracting file!"
msgstr "파일 추출 오류!"

#: common/project/project_archiver.cpp:164 eeschema/dialogs/dialog_erc.cpp:927
#: eeschema/netlist_exporters/netlist_exporter_allegro.cpp:65
#: eeschema/netlist_exporters/netlist_exporter_cadstar.cpp:48
#: eeschema/netlist_exporters/netlist_exporter_orcadpcb2.cpp:52
#: eeschema/sch_plotter.cpp:172 eeschema/sch_plotter.cpp:384
#: eeschema/sch_plotter.cpp:524 eeschema/sch_plotter.cpp:731
#: eeschema/sch_plotter.cpp:899 gerbview/export_to_pcbnew.cpp:68
#: pagelayout_editor/files.cpp:214 pcbnew/build_BOM_from_board.cpp:101
#: pcbnew/dialogs/dialog_board_statistics.cpp:661
#: pcbnew/dialogs/dialog_drc.cpp:908 pcbnew/dialogs/dialog_export_idf.cpp:235
#: pcbnew/dialogs/dialog_export_svg.cpp:360
#: pcbnew/dialogs/dialog_export_vrml.cpp:278
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:306
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:327
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:435
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:482
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:580
#: pcbnew/dialogs/dialog_gendrill.cpp:482 pcbnew/dialogs/dialog_plot.cpp:1249
#: pcbnew/exporters/export_footprint_associations.cpp:83
#: pcbnew/exporters/export_gencad.cpp:89
#: pcbnew/exporters/gendrill_Excellon_writer.cpp:118
#: pcbnew/exporters/gendrill_file_writer_base.cpp:340
#: pcbnew/exporters/gendrill_gerber_writer.cpp:105
#: pcbnew/exporters/gerber_jobfile_writer.cpp:153
#, c-format
msgid "Failed to create file '%s'."
msgstr "파일 '%s'의 생성에 실패하였습니다."

#: common/project/project_archiver.cpp:233
#, c-format
msgid "Archived file '%s'."
msgstr "'%s' 보관된 파일."

#: common/project/project_archiver.cpp:243
#, c-format
msgid "Failed to archive file '%s'."
msgstr "'%s' 파일을 보관하지 못함."

#: common/project/project_archiver.cpp:269
#, c-format
msgid "Zip archive '%s' created (%s uncompressed, %s compressed)."
msgstr "Zip 보관 '%s'이 생성됨 (%s 비압축, %s 압축)."

#: common/rc_item.cpp:411 eeschema/erc_item.cpp:333
msgid "Excluded warning: "
msgstr "제외된 경고: "

#: common/rc_item.cpp:413 eeschema/erc_item.cpp:335
msgid "Excluded error: "
msgstr "제외된 오류: "

#: common/rc_item.cpp:417 eeschema/erc_item.cpp:339
msgid "Warning: "
msgstr "경고: "

#: common/rc_item.cpp:421 eeschema/erc_item.cpp:343
msgid "Error: "
msgstr "오류: "

#: common/richio.cpp:200
#, c-format
msgid "Unable to open %s for reading."
msgstr "파일 이름 %s을(를) 읽기 위해 열 수 없음."

#: common/richio.cpp:251 common/richio.cpp:349
msgid "Maximum line length exceeded"
msgstr "최대 선 길이 초과"

#: common/richio.cpp:314
msgid "Line length exceeded"
msgstr "선 길이초과"

#: common/settings/bom_settings.cpp:119
msgid "Grouped By Value"
msgstr "값으로 그룹화"

#: common/settings/bom_settings.cpp:119 common/settings/bom_settings.cpp:137
#: common/settings/bom_settings.cpp:156
#: eeschema/dialogs/dialog_rescue_each.cpp:131
#: eeschema/dialogs/dialog_sim_model_base.cpp:254 eeschema/sch_symbol.cpp:1903
#: eeschema/sch_symbol.cpp:1955 eeschema/sch_symbol.cpp:2711
#: eeschema/widgets/search_handlers.cpp:130 pcbnew/footprint.cpp:3494
#: pcbnew/widgets/search_handlers.cpp:82
msgid "Reference"
msgstr "참조"

#: common/settings/bom_settings.cpp:137
msgid "Grouped By Value and Footprint"
msgstr "값과 풋프린트로 그룹화"

#: common/settings/bom_settings.cpp:156
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:268
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:199
#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:72 eeschema/menubar.cpp:175
#: eeschema/sch_symbol.cpp:2727 eeschema/tools/sch_edit_tool.cpp:469
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:180
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:184
#: pcbnew/footprint.cpp:3511
msgid "Attributes"
msgstr "속성"

#: common/settings/bom_settings.cpp:228
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:49
msgid "CSV"
msgstr "CSV"

#: common/settings/bom_settings.cpp:233
msgid "TSV"
msgstr "TSV"

#: common/settings/bom_settings.cpp:239
msgid "Semicolons"
msgstr "세미콜론"

#: common/settings/color_settings.cpp:341
msgid "(Footprints)"
msgstr "(풋프린트)"

#: common/settings/color_settings.cpp:393
#: pagelayout_editor/dialogs/panel_pl_editor_color_settings.cpp:80
msgid "KiCad Default"
msgstr "KiCad 기본값"

#: common/settings/color_settings.cpp:398
msgid "KiCad Classic"
msgstr "KiCad 클래식"

#: common/template_fieldnames.cpp:68
#, c-format
msgid "Field%d"
msgstr "필드%d"

#: common/tool/action_menu.cpp:212 common/tool/action_menu.cpp:217
#, c-format
msgid "Close %s"
msgstr "%s 닫기"

#: common/tool/action_menu.cpp:231 common/tool/action_menu.cpp:247
#, c-format
msgid "Quit %s"
msgstr "%s 종료"

#: common/tool/actions.cpp:45
msgid "New..."
msgstr "새로 만들기…"

#: common/tool/actions.cpp:46
msgid "Create a new document in the editor"
msgstr "편집기에서 새 문서 만들기"

#: common/tool/actions.cpp:52 eeschema/symbol_editor/symbol_editor.cpp:618
#: pcbnew/footprint_libraries_utils.cpp:1018
msgid "New Library..."
msgstr "새 라이브러리…"

#: common/tool/actions.cpp:53
msgid "Create a new library folder"
msgstr "새 라이브러리 폴더 만들기"

#: common/tool/actions.cpp:59
msgid "Add Library..."
msgstr "라이브러리 추가…"

#: common/tool/actions.cpp:60
msgid "Add an existing library folder"
msgstr "기존 라이브러리 폴더 추가"

#: common/tool/actions.cpp:68
msgid "Open..."
msgstr "열기…"

#: common/tool/actions.cpp:69
msgid "Open existing document"
msgstr "기존 문서 열기"

#: common/tool/actions.cpp:78
msgid "Save changes"
msgstr "변경 사항 저장"

#: common/tool/actions.cpp:86
msgid "Save As..."
msgstr "다른 이름으로 저장..."

#: common/tool/actions.cpp:87
msgid "Save current document to another location"
msgstr "현재 문서를 다른 위치에 저장"

#: common/tool/actions.cpp:93
msgid "Save a Copy..."
msgstr "복사본 저장..."

#: common/tool/actions.cpp:94
msgid "Save a copy of the current document to another location"
msgstr "현재 문서의 복사본을 다른 위치에 저장"

#: common/tool/actions.cpp:100
msgid "Save All"
msgstr "모두 저장"

#: common/tool/actions.cpp:101
msgid "Save all changes"
msgstr "모든 변경 사항 저장"

#: common/tool/actions.cpp:108
msgid "Throw away changes"
msgstr "변경 사항 폐기"

#: common/tool/actions.cpp:113
msgid "Page Settings..."
msgstr "페이지 설정..."

#: common/tool/actions.cpp:114
msgid "Settings for paper size and title block info"
msgstr "페이지 설정 - 용지 크기 및 제목 블록 정보 설정"

#: common/tool/actions.cpp:122
msgid "Print..."
msgstr "인쇄…"

#: common/tool/actions.cpp:129
msgid "Plot..."
msgstr "플롯..."

#: common/tool/actions.cpp:130 eeschema/sim/simulator_frame_ui.cpp:590
#: eeschema/sim/simulator_frame_ui_base.cpp:112
#: pcbnew/dialogs/dialog_plot.cpp:188 pcbnew/dialogs/dialog_plot_base.h:154
msgid "Plot"
msgstr "플롯"

#: common/tool/actions.cpp:137
msgid "Close the current editor"
msgstr "현재 편집기 닫기"

#: common/tool/actions.cpp:146
msgid "Cancel current tool"
msgstr "현재 도구 취소"

#: common/tool/actions.cpp:154
msgid "Finish"
msgstr "마침"

#: common/tool/actions.cpp:155
msgid "Finish current tool"
msgstr "현재 도구 완료"

#: common/tool/actions.cpp:162
msgid "Show Context Menu"
msgstr "상황에 맞는 메뉴 표시"

#: common/tool/actions.cpp:163
msgid "Perform the right-mouse-button action"
msgstr "마우스 오른쪽 버튼 동작 수행"

#: common/tool/actions.cpp:177
msgid "Undo last edit"
msgstr "마지막 편집 실행 취소"

#: common/tool/actions.cpp:190
msgid "Redo last edit"
msgstr "마지막 편집 재실행"

#: common/tool/actions.cpp:203
msgid "Cut selected item(s) to clipboard"
msgstr "클립보드로 선택한 항목 잘라내기"

#: common/tool/actions.cpp:214
msgid "Copy selected item(s) to clipboard"
msgstr "클립보드로 선택한 항목 복사"

#: common/tool/actions.cpp:225
msgid "Paste item(s) from clipboard"
msgstr "클립보드에서 항목 붙여넣기"

#: common/tool/actions.cpp:235
msgid "Select all items on screen"
msgstr "화면상의 모든 항목 선택"

#: common/tool/actions.cpp:241
msgid "Unselect All"
msgstr "모두 선택 해제"

#: common/tool/actions.cpp:242
msgid "Unselect all items on screen"
msgstr "화면의 모든 항목 선택 해제"

#: common/tool/actions.cpp:247
msgid "Paste Special..."
msgstr "특수 붙여넣기..."

#: common/tool/actions.cpp:248
msgid "Paste item(s) from clipboard with annotation options"
msgstr "클립보드에서 주석 옵션을 사용하여 항목 붙여넣기"

#: common/tool/actions.cpp:256 eeschema/tools/symbol_editor_edit_tool.cpp:913
#: pcbnew/tools/edit_tool.cpp:2563
msgid "Duplicate"
msgstr "복제"

#: common/tool/actions.cpp:257
msgid "Duplicates the selected item(s)"
msgstr "선택한 항목 복제"

#: common/tool/actions.cpp:270
msgid "Deletes selected item(s)"
msgstr "선택한 항목 삭제"

#: common/tool/actions.cpp:277
msgid "Interactive Delete Tool"
msgstr "대화형 삭제 도구"

#: common/tool/actions.cpp:278
msgid "Delete clicked items"
msgstr "클릭한 항목 삭제"

#: common/tool/actions.cpp:290
msgid "Cycle Arc Editing Mode"
msgstr "원호 편집 모드"

#: common/tool/actions.cpp:291
msgid "Switch to a different method of editing arcs"
msgstr "다른 호 편집 방법으로 전환"

#: common/tool/actions.cpp:298
msgid "Show Search Panel"
msgstr "검색 패널 표시"

#: common/tool/actions.cpp:299
msgid "Show/hide the search panel"
msgstr "검색 패널 표시/숨기기"

#: common/tool/actions.cpp:307 eeschema/dialogs/dialog_schematic_find.cpp:33
#: eeschema/dialogs/dialog_schematic_find_base.cpp:118
#: eeschema/dialogs/dialog_schematic_find_base.h:82
#: pcbnew/dialogs/dialog_find.cpp:55
msgid "Find"
msgstr "찾기"

#: common/tool/actions.cpp:308
msgid "Find text"
msgstr "문자열 찾기"

#: common/tool/actions.cpp:316 eeschema/dialogs/dialog_schematic_find.cpp:44
msgid "Find and Replace"
msgstr "찾기 및 바꾸기"

#: common/tool/actions.cpp:317
msgid "Find and replace text"
msgstr "문자열 찾기 및 바꾸기"

#: common/tool/actions.cpp:325 pcbnew/dialogs/dialog_find_base.cpp:91
msgid "Find Next"
msgstr "다음 항목 찾기"

#: common/tool/actions.cpp:326
msgid "Find next match"
msgstr "다음 일치하는 항목 찾기"

#: common/tool/actions.cpp:334 pcbnew/dialogs/dialog_find_base.cpp:96
msgid "Find Previous"
msgstr "이전 찾기"

#: common/tool/actions.cpp:335
msgid "Find previous match"
msgstr "이전 일치 항목 찾기"

#: common/tool/actions.cpp:343
msgid "Find Next Marker"
msgstr "다음 마커 찾기"

#: common/tool/actions.cpp:349
msgid "Replace and Find Next"
msgstr "교체 및 다음 항목 찾기"

#: common/tool/actions.cpp:350
msgid "Replace current match and find next"
msgstr "현재 검색 결과를 교체 및 다음 찾기"

#: common/tool/actions.cpp:356
#: eeschema/dialogs/dialog_schematic_find_base.cpp:128
msgid "Replace All"
msgstr "모든 항목 교체"

#: common/tool/actions.cpp:357
msgid "Replace all matches"
msgstr "모든 일치하는 항목 교체"

#: common/tool/actions.cpp:369
msgid "Previous Marker"
msgstr "이전 마커"

#: common/tool/actions.cpp:370
msgid "Go to previous marker in Checker window"
msgstr "검사기 창의 이전 마커로 이동"

#: common/tool/actions.cpp:376
msgid "Next Marker"
msgstr "다음 마커"

#: common/tool/actions.cpp:377
msgid "Go to next marker in Checker window"
msgstr "검사기 창의 다음 마커로 이동"

#: common/tool/actions.cpp:383
msgid "Exclude Marker"
msgstr "마커 제외"

#: common/tool/actions.cpp:384
msgid "Mark current violation in Checker window as an exclusion"
msgstr "검사기 창의 현재 위반사항을 예외로 마크하기"

#: common/tool/actions.cpp:397 common/tool/actions.cpp:398
#: kicad/pcm/dialogs/dialog_pcm_base.cpp:131
msgid "Refresh"
msgstr "새로고침"

#: common/tool/actions.cpp:410 common/tool/actions.cpp:411
msgid "Zoom to Fit"
msgstr "화면 맞춤 확대"

#: common/tool/actions.cpp:418 common/tool/actions.cpp:419
msgid "Zoom to Objects"
msgstr "개체 맞춤 확대"

#: common/tool/actions.cpp:431 common/tool/actions.cpp:432
msgid "Zoom In at Cursor"
msgstr "커서 중심 확대"

#: common/tool/actions.cpp:444 common/tool/actions.cpp:445
msgid "Zoom Out at Cursor"
msgstr "커서를 중심으로 축소"

#: common/tool/actions.cpp:451 common/tool/actions.cpp:452
#: common/widgets/mathplot.cpp:1450 pcbnew/dialogs/panel_setup_rules.cpp:139
msgid "Zoom In"
msgstr "확대"

#: common/tool/actions.cpp:458 common/tool/actions.cpp:459
#: common/widgets/mathplot.cpp:1451 pcbnew/dialogs/panel_setup_rules.cpp:140
msgid "Zoom Out"
msgstr "축소"

#: common/tool/actions.cpp:467 common/tool/actions.cpp:468
#: common/widgets/mathplot.cpp:1452
msgid "Center on Cursor"
msgstr "커서 중심"

#: common/tool/actions.cpp:476 common/tool/actions.cpp:477
msgid "Zoom to Selection"
msgstr "선택 영역 확대"

#: common/tool/actions.cpp:484 common/widgets/mathplot.cpp:1447
msgid "Undo Last Zoom"
msgstr "마지막 줌 실행 취소"

#: common/tool/actions.cpp:485 common/widgets/mathplot.cpp:1447
msgid "Return zoom to level prior to last zoom action"
msgstr "확대/축소를 마지막 줌 작업 이전 수준으로 되돌리기"

#: common/tool/actions.cpp:491 common/widgets/mathplot.cpp:1448
msgid "Redo Last Zoom"
msgstr "마지막 줌 재 실행"

#: common/tool/actions.cpp:492 common/widgets/mathplot.cpp:1448
msgid "Return zoom to level prior to last zoom undo"
msgstr "마지막 줌 실행을 취소하고 이전으로 돌아가기"

#: common/tool/actions.cpp:509
msgid "Cursor Up"
msgstr "커서 위로"

#: common/tool/actions.cpp:517
msgid "Cursor Down"
msgstr "커서 아래로"

#: common/tool/actions.cpp:525
msgid "Cursor Left"
msgstr "커서 왼쪽으로"

#: common/tool/actions.cpp:533
msgid "Cursor Right"
msgstr "커서 오른쪽으로"

#: common/tool/actions.cpp:542
msgid "Cursor Up Fast"
msgstr "커서 위로 빠르게 이동"

#: common/tool/actions.cpp:550
msgid "Cursor Down Fast"
msgstr "커서 아래로 빠르게 이동"

#: common/tool/actions.cpp:558
msgid "Cursor Left Fast"
msgstr "커서 왼쪽으로 빠르게 이동"

#: common/tool/actions.cpp:566
msgid "Cursor Right Fast"
msgstr "커서 오른쪽으로 빠르게 이동"

#: common/tool/actions.cpp:575 pcbnew/dialogs/panel_edit_options_base.cpp:113
#: pcbnew/dialogs/panel_edit_options_base.cpp:185
msgid "Click"
msgstr "클릭"

#: common/tool/actions.cpp:576
msgid "Performs left mouse button click"
msgstr "왼쪽 마우스 버튼 클릭 실행"

#: common/tool/actions.cpp:585
msgid "Double-click"
msgstr "더블 클릭"

#: common/tool/actions.cpp:586
msgid "Performs left mouse button double-click"
msgstr "왼쪽 마우스 버튼 더블 클릭 실행"

#: common/tool/actions.cpp:597
msgid "Pin Library"
msgstr "라이브러리 고정"

#: common/tool/actions.cpp:598
msgid "Keep the library at the top of the list"
msgstr "라이브러리를 목록의 맨 위에 두십시오"

#: common/tool/actions.cpp:603
msgid "Unpin Library"
msgstr "라이브러리 고정 해제"

#: common/tool/actions.cpp:604
msgid "No longer keep the library at the top of the list"
msgstr "더 이상 목록의 맨 위에 라이브러리를 유지하지 않습니다"

#: common/tool/actions.cpp:610
msgid "Pan Up"
msgstr "위로 패닝"

#: common/tool/actions.cpp:618
msgid "Pan Down"
msgstr "아래로 패닝"

#: common/tool/actions.cpp:626
msgid "Pan Left"
msgstr "왼쪽으로 패닝"

#: common/tool/actions.cpp:634
msgid "Pan Right"
msgstr "오른쪽으로 패닝"

#: common/tool/actions.cpp:644
msgid "Switch to Fast Grid 1"
msgstr "빠른 그리드 1로 전환"

#: common/tool/actions.cpp:651
msgid "Switch to Fast Grid 2"
msgstr "빠른 그리드 2로 전환"

#: common/tool/actions.cpp:658
msgid "Cycle Fast Grid"
msgstr "빠른 그리드 주기"

#: common/tool/actions.cpp:665
msgid "Switch to Next Grid"
msgstr "다음 그리드로 전환"

#: common/tool/actions.cpp:672
msgid "Switch to Previous Grid"
msgstr "이전 그리드로 전환"

#: common/tool/actions.cpp:678 common/tool/common_tools.cpp:576
msgid "Grid Origin"
msgstr "그리드 원점"

#: common/tool/actions.cpp:679
msgid "Place the grid origin point"
msgstr "그리드 원점 배치"

#: common/tool/actions.cpp:687
msgid "Reset Grid Origin"
msgstr "그리드 원점 재설정"

#: common/tool/actions.cpp:697
msgid "Show Grid"
msgstr "그리드 표시"

#: common/tool/actions.cpp:698
msgid "Display background grid in the edit window"
msgstr "편집 창에 그리드 표시"

#: common/tool/actions.cpp:706
msgid "Enables item-specific grids that override the current grid"
msgstr "현재 그리드를 재정의하는 항목별 그리드를 활성화"

#: common/tool/actions.cpp:713
msgid "Edit grid definitions"
msgstr "그리드 정의 편집"

#: common/tool/actions.cpp:719
msgid "Grid Origin..."
msgstr "그리드 원점..."

#: common/tool/actions.cpp:720
msgid "Set the grid origin point"
msgstr "그리드 원점 설정"

#: common/tool/actions.cpp:726
msgid "Use inches"
msgstr "inch 단위 사용"

#: common/tool/actions.cpp:734 eeschema/import_gfx/dialog_import_gfx_sch.cpp:60
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:122
#: pcbnew/dialogs/dialog_export_idf_base.cpp:102
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:94
#: pcbnew/import_gfx/dialog_import_graphics.cpp:55
#: pcbnew/pcb_dimension.cpp:1422
msgid "Mils"
msgstr "mil"

#: common/tool/actions.cpp:735
msgid "Use mils"
msgstr "mil 단위 사용"

#: common/tool/actions.cpp:743 eeschema/import_gfx/dialog_import_gfx_sch.cpp:59
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:122
#: pcbnew/dialogs/dialog_export_2581_base.cpp:55
#: pcbnew/dialogs/dialog_export_idf_base.cpp:102
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:55
#: pcbnew/dialogs/dialog_gendrill_base.cpp:106
#: pcbnew/dialogs/dialog_plot_base.cpp:342
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:94
#: pcbnew/import_gfx/dialog_import_graphics.cpp:54
#: pcbnew/pcb_dimension.cpp:1423
msgid "Millimeters"
msgstr "mm"

#: common/tool/actions.cpp:744
msgid "Use millimeters"
msgstr "mm 단위 사용"

#: common/tool/actions.cpp:760
msgid "Select Columns..."
msgstr "열 선택..."

#: common/tool/actions.cpp:767
msgid "Switch units"
msgstr "단위 전환"

#: common/tool/actions.cpp:768
msgid "Switch between imperial and metric units"
msgstr "야드파운드법과 미터법 간 전환"

#: common/tool/actions.cpp:774
msgid "Polar Coordinates"
msgstr "극 좌표계"

#: common/tool/actions.cpp:775
msgid "Switch between polar and cartesian coordinate systems"
msgstr "극 좌표계와 데카르트 좌표계 간 전환"

#: common/tool/actions.cpp:783
msgid "Reset Local Coordinates"
msgstr "지역 좌표계 초기화"

#: common/tool/actions.cpp:791
msgid "Always Show Cursor"
msgstr "커서 항상 표시"

#: common/tool/actions.cpp:792
msgid "Display crosshairs even in selection tool"
msgstr "선택 툴에도 십자선 표시하기"

#: common/tool/actions.cpp:798
msgid "Full-Window Crosshairs"
msgstr "전체 화면 십자선"

#: common/tool/actions.cpp:799
msgid "Switch display of full-window crosshairs"
msgstr "전체 화면에 십자선 표시 여부 선택"

#: common/tool/actions.cpp:806
msgid "Inactive Layer View Mode"
msgstr "비활성 레이어 표시 모드"

#: common/tool/actions.cpp:807
msgid "Toggle inactive layers between normal and dimmed"
msgstr "비활성화한 레이어를 표시하기 / 흐리게 표시하기 간 전환"

#: common/tool/actions.cpp:814
msgid "Inactive Layer View Mode (3-state)"
msgstr "비활성 레이어 표시 모드 (3 상태)"

#: common/tool/actions.cpp:815
msgid "Cycle inactive layers between normal, dimmed, and hidden"
msgstr "비활성 레이어를 표시하기 / 흐리게 표시하기 / 숨기기 간 전환"

#: common/tool/actions.cpp:821 common/tool/actions.cpp:822
msgid "Draw Bounding Boxes"
msgstr "경계 상자 그리기"

#: common/tool/actions.cpp:828 common/tool/actions.cpp:829
#: pcbnew/dialogs/panel_edit_options_base.cpp:118
#: pcbnew/dialogs/panel_edit_options_base.cpp:190
msgid "Select item(s)"
msgstr "항목 선택"

#: common/tool/actions.cpp:839
msgid "Measure Tool"
msgstr "측정 도구"

#: common/tool/actions.cpp:840
msgid "Interactively measure distance between points"
msgstr "두 점 사이의 거리를 대화형으로 측정"

#: common/tool/actions.cpp:856
msgid "Switch to Project Manager"
msgstr "프로젝트 관리자로 전환"

#: common/tool/actions.cpp:857
msgid "Show project window"
msgstr "프로젝트 창 표시"

#: common/tool/actions.cpp:866
msgid "Show 3D viewer window"
msgstr "3D 뷰어 창 표시"

#: common/tool/actions.cpp:872 eeschema/symbol_diff_frame.cpp:57
#: eeschema/symbol_viewer_frame.cpp:103 eeschema/symbol_viewer_frame.cpp:1104
msgid "Symbol Library Browser"
msgstr "심볼 라이브러리 탐색"

#: common/tool/actions.cpp:873
msgid "Browse symbol libraries"
msgstr "심볼 라이브러리 탐색"

#: common/tool/actions.cpp:882
msgid "Create, delete and edit symbols"
msgstr "심볼 편집기"

#: common/tool/actions.cpp:890 pcbnew/footprint_viewer_frame.cpp:111
#: pcbnew/footprint_viewer_frame.cpp:1024
msgid "Footprint Library Browser"
msgstr "풋프린트 라이브러리 브라우저"

#: common/tool/actions.cpp:891
msgid "Browse footprint libraries"
msgstr "풋프린트 라이브러리 탐색"

#: common/tool/actions.cpp:900
msgid "Create, delete and edit footprints"
msgstr "풋프린트 생성, 삭제 및 편집"

#: common/tool/actions.cpp:908
msgid "Show Properties Manager"
msgstr "속성 관리자 표시"

#: common/tool/actions.cpp:909
msgid "Show/hide the properties manager"
msgstr "속성 관리자 표시/숨기기"

#: common/tool/actions.cpp:917
msgid "Update PCB from Schematic..."
msgstr "회로도에서 PCB 업데이트..."

#: common/tool/actions.cpp:918
msgid "Update PCB with changes made to schematic"
msgstr "회로도의 수정사항을 PCB에 반영하여 업데이트"

#: common/tool/actions.cpp:924
msgid "Update Schematic from PCB..."
msgstr "PCB에서 회로도 업데이트..."

#: common/tool/actions.cpp:925
msgid "Update schematic with changes made to PCB"
msgstr "PCB의 수정사항을 회로도에 반영하여 업데이트"

#: common/tool/actions.cpp:932
msgid "Preferences..."
msgstr "환경 설정 ..."

#: common/tool/actions.cpp:933
msgid "Show preferences for all open tools"
msgstr "열려있는 모든 도구에 대한 환경 설정 표시"

#: common/tool/actions.cpp:940
#: pcbnew/dialogs/panel_fp_properties_3d_model_base.cpp:69
msgid "Configure Paths..."
msgstr "경로 구성..."

#: common/tool/actions.cpp:941
msgid "Edit path configuration environment variables"
msgstr "경로 설정 환경 변수 편집"

#: common/tool/actions.cpp:947
msgid "Manage Symbol Libraries..."
msgstr "심볼 라이브러리 관리..."

#: common/tool/actions.cpp:948
msgid "Edit the global and project symbol library lists"
msgstr "전역과 프로젝트 내의 심볼 라이브러리 리스트 편집"

#: common/tool/actions.cpp:954
msgid "Manage Footprint Libraries..."
msgstr "풋프린트 라이브러리 관리..."

#: common/tool/actions.cpp:955
msgid "Edit the global and project footprint library lists"
msgstr "전역과 프로젝트 내의 풋프린트 라이브러리 리스트 편집"

#: common/tool/actions.cpp:961
msgid "Getting Started with KiCad"
msgstr "KiCad 시작하기"

#: common/tool/actions.cpp:962
msgid "Open \"Getting Started in KiCad\" guide for beginners"
msgstr "입문자를 위한 \"KiCad 시작하기\" 가이드 열기"

#: common/tool/actions.cpp:968
#: pagelayout_editor/dialogs/properties_frame_base.cpp:35
#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:330
#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:136
#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:187
msgid "Help"
msgstr "도움말"

#: common/tool/actions.cpp:969
msgid "Open product documentation in a web browser"
msgstr "웹 브라우저에서 제품 설명서 열기"

#: common/tool/actions.cpp:975
msgid "About KiCad"
msgstr "KiCad 정보"

#: common/tool/actions.cpp:976
msgid "Open about dialog"
msgstr "대화 상자 열기"

#: common/tool/actions.cpp:985
msgid "List Hotkeys..."
msgstr "단축키 목록…"

#: common/tool/actions.cpp:986
msgid "Displays current hotkeys table and corresponding commands"
msgstr "현재 단축키 표와 대응하는 커맨드 표시"

#: common/tool/actions.cpp:992
msgid "Get Involved"
msgstr "참여하기"

#: common/tool/actions.cpp:993
msgid "Open \"Contribute to KiCad\" in a web browser"
msgstr "웹 브라우저에서 \"KiCad에 기여하기\" 열기"

#: common/tool/actions.cpp:1000
msgid "Open \"Donate to KiCad\" in a web browser"
msgstr "웹 브라우저에서 \"KiCad에 기부하기\" 열기"

#: common/tool/actions.cpp:1005
msgid "Report Bug"
msgstr "버그 보고"

#: common/tool/common_control.cpp:194
msgid "Can not switch to project manager in stand-alone mode."
msgstr "독립 실행형 모드에서는 프로젝트 관리자로 전환할 수 없습니다."

#: common/tool/common_control.cpp:236
#, c-format
msgid ""
"Help file '%s' or\n"
"'%s' could not be found.\n"
"Do you want to access the KiCad online help?"
msgstr ""
"도움말 파일 '%s' 또는\n"
"'%s'을(를) 찾을 수 없습니다.\n"
"KiCad 온라인 도움말에 액세스하시겠습니까?"

#: common/tool/common_control.cpp:239 common/tool/common_control.cpp:259
msgid "File Not Found"
msgstr "파일을 찾을 수 없음"

#: common/tool/common_control.cpp:256
#, c-format
msgid ""
"Help file '%s' could not be found.\n"
"Do you want to access the KiCad online help?"
msgstr ""
"도움말 파일 \"%s\"을 찾을 수 없습니다.\n"
"KiCad 온라인 도움말에 접속 하시겠습니까?"

#: common/tool/common_control.cpp:294
#, c-format
msgid ""
"Could not launch the default browser.\n"
"For information on how to help the KiCad project, visit %s"
msgstr ""
"기본 브라우저를 실행할 수 없습니다.\n"
"KiCad 프로젝트를 지원하는 방법에 대해서는 %s을(를) 참고하세요"

#: common/tool/common_control.cpp:297
msgid "Get involved with KiCad"
msgstr "KiCad에 참여하기"

#: common/tool/common_control.cpp:309
#, c-format
msgid ""
"Could not launch the default browser.\n"
"To donate to the KiCad project, visit %s"
msgstr ""
"기본 브라우저를 실행할 수 없습니다.\n"
"KiCad 프로젝트에 기부하는 방법에 대해서는 %s을(를) 참고하세요"

#: common/tool/selection_tool.cpp:306
msgid "Select &All\tA"
msgstr "모두 선택 (&A)\tA"

#: common/tool/selection_tool.cpp:309
msgid "&Expand Selection\tE"
msgstr "선택 확장 (&E)\tE"

#: common/tool/zoom_menu.cpp:67
#, c-format
msgid "Zoom: %.2f"
msgstr "줌: %.2f"

#: common/validators.cpp:251
#, c-format
msgid "Incorrect value: %s"
msgstr "잘못된 값: %s"

#: common/validators.cpp:309
msgid "Invalid signal name"
msgstr "잘못된 신호 이름"

#: common/validators.cpp:320
msgid "Signal names cannot contain CR or LF characters"
msgstr "신호 이름에는 CR 또는 LF 문자가 포함될 수 없습니다"

#: common/validators.cpp:323
msgid "Signal names cannot contain spaces"
msgstr "신호 이름에는 공백 문자가 포함될 수 없습니다"

#: common/validators.cpp:390
msgid "The value of the field cannot be empty."
msgstr "필드의 값은 비워 둘 수 없습니다."

#: common/validators.cpp:401
msgid "carriage return"
msgstr "캐리지 리턴"

#: common/validators.cpp:403
msgid "line feed"
msgstr "줄 바꿈"

#: common/validators.cpp:405
msgid "tab"
msgstr "탭"

#: common/validators.cpp:407
msgid "space"
msgstr "공간"

#: common/validators.cpp:421
msgid " or "
msgstr " 또는 "

#: common/validators.cpp:426
msgid ", or "
msgstr ", 또는 "

#: common/validators.cpp:438
#, c-format
msgid "The reference designator cannot contain %s character(s)."
msgstr "참조 지정자는 %s 문자를 포함할 수 없습니다."

#: common/validators.cpp:442
#, c-format
msgid "The value field cannot contain %s character(s)."
msgstr "값 필드는 %s 문자를 포함할 수 없습니다."

#: common/validators.cpp:446
#, c-format
msgid "The footprint field cannot contain %s character(s)."
msgstr "풋프린트 필드는 %s 문자를 포함할 수 없습니다."

#: common/validators.cpp:450
#, c-format
msgid "The datasheet field cannot contain %s character(s)."
msgstr "데이터시트 필드는 %s 문자를 포함할 수 없습니다."

#: common/validators.cpp:454
#, c-format
msgid "The sheet name cannot contain %s character(s)."
msgstr "시트 이름은 %s 문자를 포함할 수 없습니다."

#: common/validators.cpp:458
#, c-format
msgid "The sheet filename cannot contain %s character(s)."
msgstr "시트 파일명은 %s 문자를 포함할 수 없습니다."

#: common/validators.cpp:462
#, c-format
msgid "The field cannot contain %s character(s)."
msgstr "필드는 %s 문자를 포함할 수 없습니다."

#: common/validators.cpp:468
msgid "The reference designator cannot contain text variable references"
msgstr "참조 지정자는 텍스트 변수 참조를 포함할 수 없습니다"

#: common/validators.cpp:475
msgid "Field Validation Error"
msgstr "필드 검증 오류"

#: common/view/view.cpp:536
msgid "Mirroring for Y axis is not supported yet"
msgstr "Y축 미러링은 아직 지원하지 않는 기능입니다"

#: common/widgets/font_choice.cpp:64
msgid "<not found>"
msgstr "<찾을 수 없음>"

#: common/widgets/footprint_diff_widget.cpp:36 eeschema/sch_symbol.cpp:1878
#: pcbnew/dialogs/dialog_board_statistics.cpp:672
msgid "Board"
msgstr "기판"

#: common/widgets/footprint_diff_widget.cpp:37 cvpcb/cvpcb_mainframe.cpp:811
#: eeschema/sch_base_frame.cpp:569 eeschema/sch_symbol.cpp:1931
#: eeschema/sch_symbol.cpp:1935 eeschema/sch_symbol.cpp:1970
#: eeschema/widgets/symbol_diff_widget.cpp:39 pcbnew/footprint.cpp:1279
msgid "Library"
msgstr "라이브러리"

#: common/widgets/footprint_preview_widget.cpp:109
msgid "Footprint not found."
msgstr "풋프린트를 찾을 수 없습니다."

#: common/widgets/footprint_select_widget.cpp:70 cvpcb/cvpcb_mainframe.cpp:896
#: pcbnew/footprint_edit_frame.cpp:1015
#: pcbnew/widgets/panel_footprint_chooser.cpp:64
msgid "Loading Footprint Libraries"
msgstr "풋프린트 라이브러리 불러오는 중"

#: common/widgets/footprint_select_widget.cpp:148
msgid "No default footprint"
msgstr "기본 풋프린트 없음"

#: common/widgets/gal_options_panel_base.cpp:19
msgid "Rendering Engine"
msgstr "렌더링 엔진"

#: common/widgets/gal_options_panel_base.cpp:31
msgid "Accelerated graphics"
msgstr "가속 그래픽"

#: common/widgets/gal_options_panel_base.cpp:32
msgid "Hardware-accelerated graphics (recommended)"
msgstr "하드웨어 가속 그래픽 (권장)"

#: common/widgets/gal_options_panel_base.cpp:36
msgid "Fallback graphics"
msgstr "대체 그래픽"

#: common/widgets/gal_options_panel_base.cpp:37
msgid ""
"Software graphics (for computers which do not support KiCad's hardware "
"acceleration requirements)"
msgstr ""
"소프트웨어 그래픽 (KiCad의 하드웨어 가속 요구사항을 충족하지 못하는 컴퓨터용)"

#: common/widgets/gal_options_panel_base.cpp:47
msgid "Grid Display"
msgstr "그리드 표시"

#: common/widgets/gal_options_panel_base.cpp:57
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:88
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:247
#: eeschema/dialogs/dialog_line_properties_base.cpp:62
#: eeschema/dialogs/dialog_shape_properties_base.cpp:79
#: eeschema/dialogs/dialog_text_properties_base.cpp:257
#: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:62
msgid "Style:"
msgstr "스타일:"

#: common/widgets/gal_options_panel_base.cpp:61
msgid "Dots"
msgstr "점"

#: common/widgets/gal_options_panel_base.cpp:64
msgid "Lines"
msgstr "선"

#: common/widgets/gal_options_panel_base.cpp:67
msgid "Small crosses"
msgstr "작은 십자선"

#: common/widgets/gal_options_panel_base.cpp:78
msgid "Grid thickness:"
msgstr "그리드 두께:"

#: common/widgets/gal_options_panel_base.cpp:91
msgid "Minimum grid spacing:"
msgstr "최소 그리드 간격:"

#: common/widgets/gal_options_panel_base.cpp:102
msgid "Snap to grid:"
msgstr "그리드에 맞추기:"

#: common/widgets/gal_options_panel_base.cpp:106
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:357
#: pcbnew/dialogs/panel_edit_options_base.cpp:297
#: pcbnew/dialogs/panel_edit_options_base.cpp:311
#: pcbnew/dialogs/panel_edit_options_base.cpp:325 pcbnew/zone.cpp:1569
msgid "Always"
msgstr "항상"

#: common/widgets/gal_options_panel_base.cpp:106
msgid "When grid shown"
msgstr "그리드가 표시될 때"

#: common/widgets/gal_options_panel_base.cpp:106
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:357
#: pcbnew/dialogs/panel_edit_options_base.cpp:297
#: pcbnew/dialogs/panel_edit_options_base.cpp:311
#: pcbnew/dialogs/panel_edit_options_base.cpp:325 pcbnew/zone.cpp:1570
msgid "Never"
msgstr "안 함"

#: common/widgets/gal_options_panel_base.cpp:132
msgid "Small crosshairs"
msgstr "작은 십자선"

#: common/widgets/gal_options_panel_base.cpp:135
msgid "Full window crosshairs"
msgstr "전체 창 십자선"

#: common/widgets/gal_options_panel_base.cpp:141
msgid "Always show crosshairs"
msgstr "항상 십자선으로 표시"

#: common/widgets/grid_text_button_helpers.cpp:428
msgid "Select a File"
msgstr "파일 선택"

#: common/widgets/grid_text_button_helpers.cpp:460
msgid "Select Path"
msgstr "경로 선택"

#: common/widgets/lib_tree.cpp:99
msgid "Sort by Best Match"
msgstr "가장 일치하는 순으로 정렬"

#: common/widgets/lib_tree.cpp:100
msgid "Sort Alphabetically"
msgstr "알파벳순으로 정렬"

#: common/widgets/lib_tree.cpp:373
msgid "recent searches"
msgstr "최근 검색"

#: common/widgets/lib_tree.cpp:938
msgid "Select Columns"
msgstr "열 선택"

#: common/widgets/mathplot.cpp:1450
msgid "Zoom in plot view."
msgstr "플롯 뷰 확대."

#: common/widgets/mathplot.cpp:1451
msgid "Zoom out plot view."
msgstr "플롯 뷰 축소."

#: common/widgets/mathplot.cpp:1452
msgid "Center plot view to this position"
msgstr "플롯 뷰의 중심을 해당 위치에 적용"

#: common/widgets/mathplot.cpp:1453
msgid "Fit on Screen"
msgstr "화면에 맞춤"

#: common/widgets/mathplot.cpp:1453
msgid "Set plot view to show all items"
msgstr "모든 항목을 표시하도록 플롯 뷰 설정"

#: common/widgets/net_selector.cpp:58 gerbview/gerber_draw_item.cpp:751
#: pcbnew/dialogs/dialog_copper_zones.cpp:372
#: pcbnew/dialogs/dialog_copper_zones.cpp:734
msgid "<no net>"
msgstr "<네트 없음>"

#: common/widgets/net_selector.cpp:59
msgid "<create net>"
msgstr "<네트 생성>"

#: common/widgets/net_selector.cpp:84
#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:722
#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:765
msgid "Filter:"
msgstr "필터:"

#: common/widgets/paged_dialog.cpp:83 common/widgets/paged_dialog.cpp:344
#: eeschema/dialogs/dialog_bom_base.cpp:114
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:236
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:288
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:455
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:365
msgid "Reset to Defaults"
msgstr "설정 초기화"

#: common/widgets/paged_dialog.cpp:90
msgid "Reveal Preferences in Finder"
msgstr "파인더에서 환경설정 표시"

#: common/widgets/paged_dialog.cpp:92
msgid "Open Preferences Directory"
msgstr "환경설정 디렉토리 열기"

#: common/widgets/paged_dialog.cpp:336
#, c-format
msgid "Reset %s to Defaults"
msgstr "%s을 기본값으로 초기화"

#: common/widgets/properties_panel.cpp:74
#: common/widgets/properties_panel.cpp:165
msgid "No objects selected"
msgstr "선택한 객체가 없습니다"

#: common/widgets/properties_panel.cpp:289
#, c-format
msgid "%d objects selected"
msgstr "%d 오브젝트가 선택됨"

#: common/widgets/properties_panel.cpp:296
msgid "Basic Properties"
msgstr "기본 속성"

#: common/widgets/unit_binder.cpp:317
#, c-format
msgid "%s must be at least %s."
msgstr "%s은(는) 최소 %s여야 합니다."

#: common/widgets/unit_binder.cpp:334
#, c-format
msgid "%s must be less than %s."
msgstr "%s은(는) %s보다 작아야 합니다."

#: common/widgets/widget_hotkey_list.cpp:101
msgid "Press a new hotkey, or press Esc to cancel..."
msgstr "새로 설정할 단축키를 누르거나, ESC를 눌러 설정을 취소하세요..."

#: common/widgets/widget_hotkey_list.cpp:112
msgid "Command:"
msgstr "명령어:"

#: common/widgets/widget_hotkey_list.cpp:120
msgid "Current key:"
msgstr "현재 키:"

#: common/widgets/widget_hotkey_list.cpp:130
msgid "Clear assigned hotkey"
msgstr "할당된 단축키 지우기"

#: common/widgets/widget_hotkey_list.cpp:154
msgid "Set Hotkey"
msgstr "단축키 설정"

#: common/widgets/widget_hotkey_list.cpp:388
#, c-format
msgid "'%s' is a reserved hotkey in KiCad and cannot be assigned."
msgstr "'%s'는 KiCad에 예약된 단축키이며 할당할 수 없습니다."

#: common/widgets/widget_hotkey_list.cpp:448
msgid "Edit..."
msgstr "편집…"

#: common/widgets/widget_hotkey_list.cpp:449
msgid "Edit Alternate..."
msgstr "대체 편집..."

#: common/widgets/widget_hotkey_list.cpp:450
msgid "Undo Changes"
msgstr "변경 취소"

#: common/widgets/widget_hotkey_list.cpp:451
msgid "Clear Assigned Hotkey"
msgstr "연결된 단축키 삭제"

#: common/widgets/widget_hotkey_list.cpp:452
msgid "Clear Assigned Alternate"
msgstr "할당된 대체 지우기"

#: common/widgets/widget_hotkey_list.cpp:453
msgid "Restore Defaults"
msgstr "기본값 복원"

#: common/widgets/widget_hotkey_list.cpp:493
#, c-format
msgid ""
"'%s' is already assigned to '%s' in section '%s'. Are you sure you want to "
"change its assignment?"
msgstr ""
"'%s'은(는) 이미 '%s'에 지정되어 있습니다. (섹션 %s) 현재 설정으로 변경할까요?"

#: common/widgets/widget_hotkey_list.cpp:499
msgid "Confirm change"
msgstr "확인"

#: common/widgets/widget_hotkey_list.cpp:519
msgid "Command"
msgstr "커맨드"

#: common/widgets/widget_hotkey_list.cpp:522
msgid "(double-click to edit)"
msgstr "(더블 클릭으로 편집)"

#: common/widgets/widget_hotkey_list.cpp:525
msgid "Hotkey"
msgstr "단축키"

#: common/widgets/widget_hotkey_list.cpp:526
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:47 eeschema/lib_item.cpp:60
#: eeschema/symbol_editor/symbol_editor.cpp:1281
msgid "Alternate"
msgstr "대체"

#: common/widgets/wx_html_report_panel.cpp:192
#: common/widgets/wx_html_report_panel.cpp:213
#: common/widgets/wx_html_report_panel.cpp:242
msgid "Error:"
msgstr "오류:"

#: common/widgets/wx_html_report_panel.cpp:196
#: common/widgets/wx_html_report_panel.cpp:217
#: common/widgets/wx_html_report_panel.cpp:243
msgid "Warning:"
msgstr "경고:"

#: common/widgets/wx_html_report_panel.cpp:244
msgid "Info:"
msgstr "정보:"

#: common/widgets/wx_html_report_panel.cpp:370
#: eeschema/dialogs/dialog_erc.cpp:894
#: pcbnew/dialogs/dialog_board_statistics.cpp:647
#: pcbnew/dialogs/dialog_drc.cpp:874
#: pcbnew/dialogs/dialog_net_inspector.cpp:2282
msgid "Save Report File"
msgstr "보고서 파일 저장"

#: common/widgets/wx_html_report_panel.cpp:387
#, c-format
msgid "Cannot write report to file '%s'."
msgstr "'%s' 파일에 보고서를 쓸 수 없습니다."

#: common/widgets/wx_html_report_panel.cpp:389
msgid "File save error"
msgstr "파일 저장 오류"

#: common/widgets/wx_html_report_panel_base.cpp:16
msgid "Output Messages"
msgstr "출력 메시지"

#: common/widgets/wx_html_report_panel_base.cpp:30
#: eeschema/dialogs/dialog_erc_base.cpp:126
#: pcbnew/dialogs/dialog_drc_base.cpp:176
#: pcbnew/dialogs/dialog_footprint_checker_base.cpp:32
msgid "Show:"
msgstr "표시:"

#: common/widgets/wx_html_report_panel_base.cpp:34
#: eeschema/dialogs/dialog_erc_base.cpp:130 eeschema/lib_item.cpp:49
#: eeschema/lib_item.cpp:58 pcbnew/dialogs/dialog_board_reannotate.cpp:86
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:180
#: pcbnew/dialogs/dialog_drc_base.cpp:180
#: pcbnew/dialogs/dialog_footprint_checker_base.cpp:36
#: pcbnew/widgets/appearance_controls.cpp:709
#: pcbnew/widgets/appearance_controls.cpp:751
#: pcbnew/widgets/appearance_controls.cpp:2475
#: pcbnew/widgets/appearance_controls.cpp:2494
msgid "All"
msgstr "모두"

#: common/widgets/wx_html_report_panel_base.cpp:50
#: eeschema/dialogs/dialog_erc_base.cpp:142
#: pcbnew/dialogs/dialog_drc_base.cpp:192
#: pcbnew/dialogs/dialog_footprint_checker_base.cpp:49
msgid "Warnings"
msgstr "경고"

#: common/widgets/wx_html_report_panel_base.cpp:59
msgid "Actions"
msgstr "조치"

#: common/widgets/wx_html_report_panel_base.cpp:65
msgid "Infos"
msgstr "정보"

#: common/widgets/wx_html_report_panel_base.cpp:71
#: eeschema/dialogs/dialog_erc_base.cpp:157
#: pcbnew/dialogs/dialog_drc_base.cpp:207
msgid "Save..."
msgstr "저장..."

#: common/wildcards_and_files_ext.cpp:212
msgid "All files"
msgstr "모든 파일"

#: common/wildcards_and_files_ext.cpp:218
#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr.h:80
msgid "KiCad symbol library files"
msgstr "KiCad 심볼 라이브러리 파일"

#: common/wildcards_and_files_ext.cpp:225
msgid "KiCad project files"
msgstr "KiCad 프로젝트 파일"

#: common/wildcards_and_files_ext.cpp:231
msgid "KiCad legacy project files"
msgstr "KiCad 레거시 프로젝트 파일"

#: common/wildcards_and_files_ext.cpp:238
msgid "All KiCad project files"
msgstr "모든 KiCad 프로젝트 파일"

#: common/wildcards_and_files_ext.cpp:245
msgid "All KiCad schematic files"
msgstr "모든 KiCad 회로도 파일"

#: common/wildcards_and_files_ext.cpp:252
#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy.h:75
msgid "KiCad legacy schematic files"
msgstr "KiCad 레거시 회로도 파일"

#: common/wildcards_and_files_ext.cpp:259
#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr.h:74
msgid "KiCad s-expression schematic files"
msgstr "KiCad s-expression 회로도 파일"

#: common/wildcards_and_files_ext.cpp:266
msgid "CADSTAR Archive files"
msgstr "CADSTAR 보관 파일"

#: common/wildcards_and_files_ext.cpp:272
msgid "Eagle XML files"
msgstr "Eagle XML파일"

#: common/wildcards_and_files_ext.cpp:278
msgid "OrcadPCB2 netlist files"
msgstr "OrcadPCB2 네트리스트 파일"

#: common/wildcards_and_files_ext.cpp:285
msgid "KiCad netlist files"
msgstr "KiCad 네트리스트 파일"

#: common/wildcards_and_files_ext.cpp:291
msgid "Allegro netlist files"
msgstr "Allegro 네트리스트 파일"

#: common/wildcards_and_files_ext.cpp:298
msgid "EasyEDA (JLCEDA) Std backup archive"
msgstr "EasyEDA (JLCEDA) 표준 백업"

#: common/wildcards_and_files_ext.cpp:304
#: eeschema/sch_io/easyedapro/sch_io_easyedapro.h:46
#: eeschema/sch_io/easyedapro/sch_io_easyedapro.h:51
#: pcbnew/pcb_io/easyedapro/pcb_io_easyedapro.h:51
msgid "EasyEDA (JLCEDA) Pro files"
msgstr "EasyEDA (JLCEDA) Pro 파일"

#: common/wildcards_and_files_ext.cpp:310
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.h:288
msgid "KiCad printed circuit board files"
msgstr "KiCad 인쇄 회로 기판 파일"

#: common/wildcards_and_files_ext.cpp:317
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.h:298
msgid "KiCad footprint files"
msgstr "KiCad 풋프린트 파일"

#: common/wildcards_and_files_ext.cpp:323
msgid "KiCad footprint library paths"
msgstr "KiCad 풋프린트 라이브러리 경로"

#: common/wildcards_and_files_ext.cpp:330
msgid "Drawing sheet files"
msgstr "도면 시트 파일"

#: common/wildcards_and_files_ext.cpp:338
msgid "KiCad symbol footprint link files"
msgstr "KiCad 심볼 풋프린트 링크 파일"

#: common/wildcards_and_files_ext.cpp:346 gerbview/files.cpp:70
msgid "Drill files"
msgstr "드릴 파일"

#: common/wildcards_and_files_ext.cpp:353
msgid "SVG files"
msgstr "SVG 파일"

#: common/wildcards_and_files_ext.cpp:359
msgid "HTML files"
msgstr "HTML 파일"

#: common/wildcards_and_files_ext.cpp:365
msgid "CSV Files"
msgstr "CSV 파일"

#: common/wildcards_and_files_ext.cpp:371
msgid "Portable document format files"
msgstr "휴대용 문서 형식 파일"

#: common/wildcards_and_files_ext.cpp:377
msgid "PostScript files"
msgstr "PostScript 파일"

#: common/wildcards_and_files_ext.cpp:383
msgid "Json files"
msgstr "Json 파일"

#: common/wildcards_and_files_ext.cpp:389
msgid "Report files"
msgstr "보고서 파일"

#: common/wildcards_and_files_ext.cpp:395
msgid "Component placement files"
msgstr "컴포넌트 배치 파일"

#: common/wildcards_and_files_ext.cpp:401
msgid "VRML and X3D files"
msgstr "VRML과 X3D 파일"

#: common/wildcards_and_files_ext.cpp:407
msgid "IDFv3 footprint files"
msgstr "IDFv3 풋프린트 파일"

#: common/wildcards_and_files_ext.cpp:413
msgid "Text files"
msgstr "텍스트 파일"

#: common/wildcards_and_files_ext.cpp:419
msgid "Legacy footprint export files"
msgstr "레거시 풋프린트 내보내기 파일"

#: common/wildcards_and_files_ext.cpp:425
msgid "Electrical rule check file"
msgstr "전기 규칙 검토 파일"

#: common/wildcards_and_files_ext.cpp:431
msgid "Spice library file"
msgstr "Spice 라이브러리 파일"

#: common/wildcards_and_files_ext.cpp:437
msgid "SPICE netlist file"
msgstr "SPICE 네트리스트 파일"

#: common/wildcards_and_files_ext.cpp:443
msgid "CadStar netlist file"
msgstr "CadStar 네트리스트 파일"

#: common/wildcards_and_files_ext.cpp:449
msgid "Symbol footprint association files"
msgstr "심볼 풋프린트 연결 파일"

#: common/wildcards_and_files_ext.cpp:455
msgid "Zip file"
msgstr "Zip 파일"

#: common/wildcards_and_files_ext.cpp:461
msgid "GenCAD 1.4 board files"
msgstr "GenCAD 1.4 보드 파일"

#: common/wildcards_and_files_ext.cpp:467
msgid "DXF Files"
msgstr "DXF 파일"

#: common/wildcards_and_files_ext.cpp:473
#: resources/linux/mime/kicad-gerbers.xml.in:22
msgid "Gerber job file"
msgstr "거버 작업 파일"

#: common/wildcards_and_files_ext.cpp:479
msgid "Specctra DSN file"
msgstr "Specctra DSN 파일"

#: common/wildcards_and_files_ext.cpp:486
msgid "Specctra Session file"
msgstr "Specctra 세션 파일"

#: common/wildcards_and_files_ext.cpp:493
msgid "IPC-D-356 Test Files"
msgstr "IPC-D-356 테스트 파일"

#: common/wildcards_and_files_ext.cpp:500
msgid "Workbook file"
msgstr "Workbook 파일"

#: common/wildcards_and_files_ext.cpp:507
msgid "PNG file"
msgstr "PNG 파일"

#: common/wildcards_and_files_ext.cpp:513
msgid "Jpeg file"
msgstr "JPEG 파일"

#: common/wildcards_and_files_ext.cpp:519
msgid "Hotkey file"
msgstr "단축키 파일"

#: cvpcb/auto_associate.cpp:108
#, c-format
msgid "Equivalence file '%s' could not be found."
msgstr "동일한 파일 '%s'을(를) 찾을 수 없습니다."

#: cvpcb/auto_associate.cpp:128
#, c-format
msgid "Error opening equivalence file '%s'."
msgstr "'%s' 파일을 여는 중 오류 발생."

#: cvpcb/auto_associate.cpp:180
msgid "Equivalence File Load Error"
msgstr "파일 불러오기 오류"

#: cvpcb/auto_associate.cpp:187
#, c-format
msgid "%lu footprint/symbol equivalences found."
msgstr "%lu 풋프린트/심볼 관련 내용이 발견됨."

#: cvpcb/auto_associate.cpp:263
#, c-format
msgid ""
"Component %s: footprint %s not found in any of the project footprint "
"libraries."
msgstr ""
"컴포넌트 %s: 어떠한 프로젝트 풋프린트 라이브러리에서도 %s 풋프린트를 찾지 못"
"했습니다."

#: cvpcb/auto_associate.cpp:308
msgid "CvPcb Warning"
msgstr "CvPcb 경고"

#: cvpcb/cvpcb.cpp:209
msgid ""
"You have run CvPcb for the first time using the new footprint library table "
"method for finding footprints.\n"
"CvPcb has either copied the default table or created an empty table in your "
"home folder.\n"
"You must first configure the library table to include all footprint "
"libraries not included with KiCad.\n"
"See the \"Footprint Library Table\" section of the CvPcb documentation for "
"more information."
msgstr ""
"CvPcb가 처음 구동되었으며, 풋프린트를 검색하기 위한 새로운 풋프린트 라이브러"
"리 테이블 방식을 사용할 수 있습니다.\n"
"CvPcb는 여러분의 홈 폴더에 기본 테이블을 복사하거나 빈 테이블을 생성합니다.\n"
"당신은 먼저 KiCad에 기본적으로 포함되지 않은 풋프린트 라이브러리를 포함시키"
"기 위하여 라이브러리 테이블을 구성하여야 합니다.\n"
"자세한 내용은 CvPcb 공식 문서의 \"풋프린트 라이브러리 테이블\" 섹션을 참고하"
"세요."

#: cvpcb/cvpcb.cpp:225
msgid ""
"An error occurred attempting to load the global footprint library table."
msgstr "전역 풋프린트 라이브러리 테이블을 불러오는 중에 오류가 발생했습니다."

#: cvpcb/cvpcb_mainframe.cpp:65 cvpcb/cvpcb_mainframe.cpp:81
#: cvpcb/menubar.cpp:50
msgid "Assign Footprints"
msgstr "풋프린트 할당"

#: cvpcb/cvpcb_mainframe.cpp:113 pcbnew/dialogs/panel_fp_lib_table.cpp:1206
msgid "Footprint Libraries"
msgstr "풋프린트 라이브러리"

#: cvpcb/cvpcb_mainframe.cpp:117
msgid "Symbol : Footprint Assignments"
msgstr "심볼: 풋프린트 할당"

#: cvpcb/cvpcb_mainframe.cpp:120
msgid "Filtered Footprints"
msgstr "필터링된 풋프린트"

#: cvpcb/cvpcb_mainframe.cpp:151
#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:331
msgid "Apply, Save Schematic && Continue"
msgstr "적용, 저장 && 계속"

#: cvpcb/cvpcb_mainframe.cpp:210
msgid "Symbol to footprint changes are unsaved"
msgstr "심볼에서 풋프린트 변경 사항이 저장되지 않음"

#: cvpcb/cvpcb_mainframe.cpp:398
msgid "Symbol to Footprint links have been modified. Save changes?"
msgstr "풋프린트 심볼 링크가 변경되었습니다. 저장할까요?"

#: cvpcb/cvpcb_mainframe.cpp:626 cvpcb/tools/cvpcb_association_tool.cpp:208
#, c-format
msgid "'%s' is not a valid footprint."
msgstr "%s은(는) 유효한 풋프린트가 아닙니다."

#: cvpcb/cvpcb_mainframe.cpp:782 eeschema/generate_alias_info.cpp:39
#: eeschema/sch_symbol.cpp:1950 eeschema/sch_symbol.cpp:2463
#: eeschema/sch_symbol.cpp:2723 eeschema/symbol_editor/symbol_editor.cpp:1296
#: eeschema/symbol_viewer_frame.cpp:461 pcbnew/footprint.cpp:3507
#: pcbnew/generate_footprint_info.cpp:37 pcbnew/plot_board_layers.cpp:118
msgid "Keywords"
msgstr "키워드"

#: cvpcb/cvpcb_mainframe.cpp:798
msgid "Pin Count"
msgstr "핀 개수"

#: cvpcb/cvpcb_mainframe.cpp:824
msgid "Search Text"
msgstr "문자열 검색"

#: cvpcb/cvpcb_mainframe.cpp:828
msgid "No Filtering"
msgstr "필터 없음"

#: cvpcb/cvpcb_mainframe.cpp:830
#, c-format
msgid "Filtered by %s"
msgstr "%s(으)로 필터링됨"

#: cvpcb/cvpcb_mainframe.cpp:832
#, c-format
msgid ": %i matching footprints"
msgstr ": %i 풋프린트 일치"

#: cvpcb/cvpcb_mainframe.cpp:844
#, c-format
msgid "Description: %s;  Keywords: %s"
msgstr "설명: %s; 키워드: %s"

#: cvpcb/cvpcb_mainframe.cpp:876
#, c-format
msgid "Library location: %s"
msgstr "라이브러리 위치: %s"

#: cvpcb/cvpcb_mainframe.cpp:878
msgid "Library location: unknown"
msgstr "라이브러리 위치: 알 수 없음"

#: cvpcb/cvpcb_mainframe.cpp:891
msgid ""
"No PCB footprint libraries are listed in the current footprint library table."
msgstr ""
"현재 풋프린트 라이브러리 테이블에는 PCB 풋프린트 라이브러리가 존재하지 않습니"
"다."

#: cvpcb/cvpcb_mainframe.cpp:892
msgid "Configuration Error"
msgstr "설정 오류"

#: cvpcb/cvpcb_mainframe.cpp:960
#, c-format
msgid ""
"Error loading schematic.\n"
"%s"
msgstr ""
"회로도 불러오는 중에 오류 발생.\n"
"%s"

#: cvpcb/dialogs/dialog_config_equfiles.cpp:45
#, c-format
msgid "Project file: '%s'"
msgstr "프로젝트 파일: '%s'"

#: cvpcb/dialogs/dialog_config_equfiles.cpp:93
#: eeschema/dialogs/dialog_bom.cpp:453
#: gerbview/tools/gerbview_inspection_tool.cpp:185
#: kicad/project_tree_pane.cpp:999
msgid "No text editor selected in KiCad.  Please choose one."
msgstr "KiCad에서 선택한 텍스트 편집기가 없습니다.  하나를 선택하세요."

#: cvpcb/dialogs/dialog_config_equfiles.cpp:210
msgid "Footprint Association File"
msgstr "풋프린트 연결 파일"

#: cvpcb/dialogs/dialog_config_equfiles.cpp:249
#, c-format
msgid "File '%s' already exists in list."
msgstr "파일 '%s'은(는) 이미 목록에 있습니다."

#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:26
msgid "Footprint association files:"
msgstr "풋프린트 연결 파일:"

#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:38
msgid "Add association file"
msgstr "연결파일 추가"

#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:53
msgid "Edit association file"
msgstr "연결 파일 편집"

#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:61
msgid "Remove association file"
msgstr "연결 파일 제거"

#: cvpcb/dialogs/dialog_config_equfiles_base.cpp:72
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:169
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:163
msgid "Available path substitutions:"
msgstr "사용 가능한 경로:"

#: cvpcb/dialogs/fp_conflict_assignment_selector.cpp:37
msgid "Ref"
msgstr "레퍼런스"

#: cvpcb/dialogs/fp_conflict_assignment_selector.cpp:38
msgid "Schematic assignment"
msgstr "회로도 할당"

#: cvpcb/dialogs/fp_conflict_assignment_selector.cpp:41
msgid "Cmp file assignment"
msgstr "Cmp 파일 할당"

#: cvpcb/dialogs/fp_conflict_assignment_selector_base.cpp:19
msgid ""
"Footprint assignments from schematic netlist and symbol footprint "
"association file (.cmp) are conflicting.\n"
"\n"
"Please choose the assignment."
msgstr ""
"회로도 네트리스트와 심볼 풋프린트 연결 파일(.cmp)의 풋프린트 할당이 충돌합니"
"다.\n"
"\n"
"할당을 선택하세요."

#: cvpcb/dialogs/fp_conflict_assignment_selector_base.h:53
msgid "Footprint Assignment Conflicts"
msgstr "풋프린트 할당 충돌"

#: cvpcb/display_footprints_frame.cpp:70
#: pcbnew/toolbars_footprint_viewer.cpp:176
msgid "Footprint Viewer"
msgstr "풋프린트 보기"

#: cvpcb/display_footprints_frame.cpp:318
#: pcbnew/toolbars_footprint_viewer.cpp:107
msgid "Automatic Zoom on footprint change"
msgstr "풋프린트 변경 시 자동 줌"

#: cvpcb/display_footprints_frame.cpp:406
#, c-format
msgid "Footprint ID '%s' is not valid."
msgstr "풋프린트 ID '%s'은(는) 유효하지 않습니다."

#: cvpcb/display_footprints_frame.cpp:421
#, c-format
msgid "Library '%s' is not in the footprint library table."
msgstr "라이브러리 '%s'이(가) 풋프린트 라이브러리 테이블에 없습니다."

#: cvpcb/display_footprints_frame.cpp:430
#: cvpcb/display_footprints_frame.cpp:456
#, c-format
msgid "Footprint '%s' not found."
msgstr "%s 풋프린트를 찾을 수 없습니다."

#: cvpcb/display_footprints_frame.cpp:515 pcbnew/footprint.cpp:1334
#, c-format
msgid "Footprint: %s"
msgstr "풋프린트: %s"

#: cvpcb/display_footprints_frame.cpp:547
#, c-format
msgid "Lib: %s"
msgstr "라이브러리: %s"

#: cvpcb/readwrite_dlgs.cpp:120
msgid ""
"Some of the assigned footprints are legacy entries with no library names. "
"Would you like KiCad to attempt to convert them to the new required LIB_ID "
"format? (If you answer no, then these assignments will be cleared and you "
"will need to re-assign them manually.)"
msgstr ""
"할당된 풋프린트 중 몇 종류는 라이브러리명이 없는 오래된 항목입니다. KiCad를 "
"통해 해당 풋프린트를 새로운 필요 LIB_ID 포맷으로 변환하시겠습니까? (아니오를 "
"선택하실 경우, 해당 할당은 모두 지워지고 사용자가 수동으로 각각의 풋프린트를 "
"재할당 해주어야 합니다.)"

#: cvpcb/readwrite_dlgs.cpp:149
#, c-format
msgid "Component '%s' footprint '%s' <b>not found</b> in any library.\n"
msgstr ""
"라이브러리에서 구성 요소 '%s'의 풋프린트 '%s'을(를) <b> 찾을 수 없습니다</"
"b>.\n"

#: cvpcb/readwrite_dlgs.cpp:156
#, c-format
msgid "Component '%s' footprint '%s' was found in <b>multiple</b> libraries.\n"
msgstr ""
"구성 요소 '%s'의 풋프린트 '%s'이(가) <b>여러</b> 라이브러리에서 발견되었습니"
"다.\n"

#: cvpcb/readwrite_dlgs.cpp:169
msgid "First check your footprint library table entries."
msgstr "먼저 풋프린트 라이브러리 테이블 항목을 확인하세요."

#: cvpcb/readwrite_dlgs.cpp:171
msgid "Problematic Footprint Library Tables"
msgstr "문제가 발견된 풋프린트 라이브러리 테이블"

#: cvpcb/readwrite_dlgs.cpp:179
msgid ""
"The following errors occurred attempting to convert the footprint "
"assignments:\n"
"\n"
msgstr ""
"풋프린트 할당을 변환하는 도중 다음의 오류가 발생하였습니다:\n"
"\n"

#: cvpcb/readwrite_dlgs.cpp:182
msgid ""
"\n"
"You will need to reassign them manually if you want them to be updated "
"correctly the next time you import the netlist in Pcbnew."
msgstr ""
"\n"
"다음에 Pcbnew에서 네트리스트로 불러올 때 업데이트가 제대로 이루어지기 위해서"
"는 해당 항목을 수동으로 재할당 해주어야 합니다."

#: cvpcb/readwrite_dlgs.cpp:308
msgid "Schematic saved"
msgstr "회로도 저장됨"

#: cvpcb/toolbars_cvpcb.cpp:70
msgid "Footprint Filters:"
msgstr "풋프린터 필터:"

#: cvpcb/tools/cvpcb_actions.cpp:55
msgid "View selected footprint"
msgstr "선택한 풋프린트 보기"

#: cvpcb/tools/cvpcb_actions.cpp:56
msgid "View the selected footprint in the footprint viewer"
msgstr "선택한 풋프린트를 풋프린트 뷰어에서 보기"

#: cvpcb/tools/cvpcb_actions.cpp:64
msgid "Manage Footprint Association Files..."
msgstr "풋프린트 연결 파일 관리..."

#: cvpcb/tools/cvpcb_actions.cpp:65
msgid ""
"Edit the footprint association files list.  These files are used to "
"automatically assign footprint names from symbol values."
msgstr ""
"풋프린트 연결 파일 목록을 편집합니다.  이러한 파일은 심볼 값에서 풋프린트 이"
"름을 자동으로 할당하는 데 사용됩니다."

#: cvpcb/tools/cvpcb_actions.cpp:73
msgid "Save to Schematic"
msgstr "회로도에 저장"

#: cvpcb/tools/cvpcb_actions.cpp:74
msgid "Save footprint associations in schematic symbol footprint fields"
msgstr "회로도 심볼 풋프린트 필드에 풋프린트 연결 저장하기"

#: cvpcb/tools/cvpcb_actions.cpp:82
msgid "Save to Schematic and File"
msgstr "도식 및 파일에 저장"

#: cvpcb/tools/cvpcb_actions.cpp:83
msgid ""
"Save footprint associations in schematic symbol footprint fields and "
"schematic files"
msgstr "도식 기호 표시 공간 필드 및 도식 파일에 설치 공간 연결 저장"

#: cvpcb/tools/cvpcb_actions.cpp:105
msgid "Select next unassigned symbol"
msgstr "할당되지 않은 다음 심볼을 선택"

#: cvpcb/tools/cvpcb_actions.cpp:106
msgid "Select next symbol with no footprint assignment"
msgstr "풋프린트 할당 없이 다음 심볼 선택"

#: cvpcb/tools/cvpcb_actions.cpp:114
msgid "Select previous unassigned symbol"
msgstr "할당되지 않은 이전 심볼을 선택"

#: cvpcb/tools/cvpcb_actions.cpp:115
msgid "Select previous symbol with no footprint assignment"
msgstr "풋프린트 할당 없이 이전 심볼 선택"

#: cvpcb/tools/cvpcb_actions.cpp:126
msgid "Assign footprint"
msgstr "풋프린트 할당"

#: cvpcb/tools/cvpcb_actions.cpp:127
msgid "Assign footprint to selected symbols"
msgstr "선택한 심볼에 풋프린트 할당"

#: cvpcb/tools/cvpcb_actions.cpp:133
msgid "Automatically assign footprints"
msgstr "자동으로 풋프린트 할당"

#: cvpcb/tools/cvpcb_actions.cpp:134
msgid "Perform automatic footprint assignment"
msgstr "풋프린트 할당을 자동으로 수행하기"

#: cvpcb/tools/cvpcb_actions.cpp:141
msgid "Delete association"
msgstr "관련성 삭제"

#: cvpcb/tools/cvpcb_actions.cpp:142
msgid "Delete selected footprint associations"
msgstr "선택한 풋프린트 연결 삭제"

#: cvpcb/tools/cvpcb_actions.cpp:148 cvpcb/tools/cvpcb_actions.cpp:149
msgid "Delete all footprint associations"
msgstr "모든 풋프린트 연결 삭제"

#: cvpcb/tools/cvpcb_actions.cpp:157
msgid "Use symbol footprint filters"
msgstr "심볼 풋프린트 필터 사용"

#: cvpcb/tools/cvpcb_actions.cpp:158
msgid "Filter footprint list by footprint filters defined in the symbol"
msgstr "풋프린트 리스트를 심볼에 정의되어 있는 풋프린트 필터로 필터링"

#: cvpcb/tools/cvpcb_actions.cpp:166 pcbnew/footprint_chooser_frame.cpp:84
msgid "Filter by pin count"
msgstr "핀 개수로 필터링"

#: cvpcb/tools/cvpcb_actions.cpp:167
msgid "Filter footprint list by pin count"
msgstr "풋프린트 리스트를 핀 개수로 필터링"

#: cvpcb/tools/cvpcb_actions.cpp:175
msgid "Filter by library"
msgstr "라이브러리로 필터링"

#: cvpcb/tools/cvpcb_actions.cpp:176
msgid "Filter footprint list by library"
msgstr "풋프린트 리스트를 라이브러리별로 필터링"

#: cvpcb/tools/cvpcb_association_tool.cpp:255
msgid "Delete all associations?"
msgstr "모든 관련성을 삭제하시겠습니까?"

#: cvpcb/tools/cvpcb_control.cpp:181
msgid "Unable to create the footprint viewer frame"
msgstr "풋프린트 뷰어 프레임을 만들 수 없음"

#: eeschema/annotate.cpp:155
msgid "Delete Annotation"
msgstr "주석 삭제"

#: eeschema/annotate.cpp:259
#, c-format
msgid "%d duplicate time stamps were found and replaced."
msgstr "%d개의 중복되는 타임스탬프가 발견되었고 교체되었습니다."

#: eeschema/annotate.cpp:378
#, c-format
msgid "Updated %s (unit %s) from %s to %s."
msgstr "%s (단위 %s)을(를) %s에서 %s(으)로 업데이트했습니다."

#: eeschema/annotate.cpp:386
#, c-format
msgid "Updated %s from %s to %s."
msgstr "%s을(를) %s에서 %s(으)로 업데이트했습니다."

#: eeschema/annotate.cpp:396
#, c-format
msgid "Annotated %s (unit %s) as %s."
msgstr "%s (단위 %s)을(를) %s(으)로 주석 처리하였습니다."

#: eeschema/annotate.cpp:403
#, c-format
msgid "Annotated %s as %s."
msgstr "%s이(가) %s(으)로 주석 처리되었습니다."

#: eeschema/annotate.cpp:420
msgid "Annotation complete."
msgstr "부품 참조번호 주석 처리가 완료되었습니다."

#: eeschema/bom_plugins.cpp:46
#, c-format
msgid ""
"Script file:\n"
"%s\n"
"not found. Script not available."
msgstr ""
"스크립트 파일:\n"
"%s\n"
"찾지 못했습니다. 스크립트가 존재하지 않습니다."

#: eeschema/connection_graph.cpp:2978
#, c-format
msgid ""
"Both %s and %s are attached to the same items; %s will be used in the netlist"
msgstr ""
"%s와 %s이(가) 같은 항목에 연결되어 있습니다; %s은(는) 네트리스트에 사용됩니다"

#: eeschema/connection_graph.cpp:3257
#, c-format
msgid ""
"Net %s is graphically connected to bus %s but is not a member of that bus"
msgstr ""
"네트 %s은(는) 버스 %s에 시각적으로 연결되어 있지만 해당 버스의 멤버가 아닙니"
"다"

#: eeschema/connection_graph.cpp:3776
#, c-format
msgid "Sheet pin %s has no matching hierarchical label inside the sheet"
msgstr "시트 핀 %s에는 시트 내부에 일치하는 계층 라벨이 없습니다"

#: eeschema/connection_graph.cpp:3794
#, c-format
msgid "Hierarchical label %s has no matching sheet pin in the parent sheet"
msgstr "계층 라벨 %s에는 상위 시트 내부에 일치하는 시트 핀이 없습니다"

#: eeschema/cross-probing.cpp:155
#, c-format
msgid "%s pin %s found"
msgstr "%s 핀 %s 찾음"

#: eeschema/cross-probing.cpp:157
#, c-format
msgid "%s found but pin %s not found"
msgstr "%s을(를) 찾았지만 핀 %s을(를) 찾을 수 없음"

#: eeschema/cross-probing.cpp:161
#, c-format
msgid "%s found"
msgstr "%s 발견"

#: eeschema/cross-probing.cpp:166 eeschema/sim/simulator_frame_ui.cpp:1408
#: eeschema/sim/simulator_frame_ui.cpp:1845
#: eeschema/widgets/tuner_slider.cpp:56
#, c-format
msgid "%s not found"
msgstr "%s을(를) 찾을 수 없음"

#: eeschema/cross-probing.cpp:230
msgid "Selected net:"
msgstr "선택한 네트:"

#: eeschema/dialogs/dialog_annotate.cpp:89
msgid "Annotation Messages:"
msgstr "주석 메시지:"

#: eeschema/dialogs/dialog_annotate.cpp:92
#: eeschema/dialogs/dialog_annotate.cpp:226
msgid "Annotate"
msgstr "주석"

#: eeschema/dialogs/dialog_annotate_base.cpp:40
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:25
#: gerbview/dialogs/dialog_draw_layers_settings_base.cpp:79
#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:25
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:26
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:25
msgid "Scope"
msgstr "범위"

#: eeschema/dialogs/dialog_annotate_base.cpp:42
msgid "Entire schematic"
msgstr "전체 회로도"

#: eeschema/dialogs/dialog_annotate_base.cpp:45
#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:166
msgid "Current sheet only"
msgstr "현재 시트만"

#: eeschema/dialogs/dialog_annotate_base.cpp:48
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:101
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:190
msgid "Selection"
msgstr "선택"

#: eeschema/dialogs/dialog_annotate_base.cpp:51
msgid "Recurse into subsheets"
msgstr "하위 시트로 되돌아가기"

#: eeschema/dialogs/dialog_annotate_base.cpp:58
#: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:27
msgid "Order"
msgstr "순서"

#: eeschema/dialogs/dialog_annotate_base.cpp:63
#: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:37
msgid "Sort symbols by &X position"
msgstr "&X 위치에 따라 심볼 정렬"

#: eeschema/dialogs/dialog_annotate_base.cpp:75
#: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:49
msgid "Sort symbols by &Y position"
msgstr "&Y 위치에 따라 심볼 정렬"

#: eeschema/dialogs/dialog_annotate_base.cpp:87
msgid "Keep existing annotations"
msgstr "기존 주석 유지"

#: eeschema/dialogs/dialog_annotate_base.cpp:87
msgid "Reset existing annotations"
msgstr "기존 주석 초기화"

#: eeschema/dialogs/dialog_annotate_base.cpp:94
#: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:61
msgid "Numbering"
msgstr "번호 매기기"

#: eeschema/dialogs/dialog_annotate_base.cpp:101
#: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:73
msgid "Use first free number after:"
msgstr "해당 번호 이후의 첫 번째 빈 번호부터 사용:"

#: eeschema/dialogs/dialog_annotate_base.cpp:107
#: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:79
msgid "First free after sheet number X 100"
msgstr "시트 번호 X 100 이후의 첫번째 빈 번호"

#: eeschema/dialogs/dialog_annotate_base.cpp:110
#: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:82
msgid "First free after sheet number X 1000"
msgstr "시트 번호 X 1000 이후의 첫번째 빈 번호"

#: eeschema/dialogs/dialog_annotate_base.cpp:133
msgid "Clear Annotation"
msgstr "주석 지우기"

#: eeschema/dialogs/dialog_annotate_base.h:85
msgid "Annotate Schematic"
msgstr "회로도에 주석 달기"

#: eeschema/dialogs/dialog_bom.cpp:135
msgid "Generate"
msgstr "생성"

#: eeschema/dialogs/dialog_bom.cpp:217
msgid "(file missing)"
msgstr "(파일 찾을 수 없음)"

#: eeschema/dialogs/dialog_bom.cpp:294
#, c-format
msgid "The selected BOM generator script %s could not be found."
msgstr "선택한 BOM 생성 스크립트 %s을(를) 찾을 수 없습니다."

#: eeschema/dialogs/dialog_bom.cpp:299
#, c-format
msgid ""
"\n"
"\n"
"Searched:\n"
"\t%s\n"
"\t%s"
msgstr ""
"\n"
"\n"
"검색 결과:\n"
"\t%s\n"
"\t%s"

#: eeschema/dialogs/dialog_bom.cpp:347
msgid "Generating BOM requires a fully annotated schematic."
msgstr "BOM 생성을 위해서는 완전히 주석 처리된 회로도가 필요합니다."

#: eeschema/dialogs/dialog_bom.cpp:351
msgid "Failed to create file."
msgstr "파일을 생성하지 못했습니다."

#: eeschema/dialogs/dialog_bom.cpp:387 eeschema/dialogs/dialog_bom_base.cpp:45
msgid "Generator nickname:"
msgstr "생성기 별칭:"

#: eeschema/dialogs/dialog_bom.cpp:387
msgid "Add Generator"
msgstr "생성기 추가"

#: eeschema/dialogs/dialog_bom.cpp:396
#, c-format
msgid "Nickname '%s' already in use."
msgstr "“%s” 별칭은 이미 사용 중입니다."

#: eeschema/dialogs/dialog_bom.cpp:425
#: eeschema/dialogs/dialog_export_netlist.cpp:822
msgid "Generator File"
msgstr "생성기 파일"

#: eeschema/dialogs/dialog_bom.cpp:444
msgid "Generator file name not found."
msgstr "생성기 파일명을 찾을 수 없습니다."

#: eeschema/dialogs/dialog_bom.cpp:465
msgid "Bill of Materials Generation Help"
msgstr "자재 명세서 (BOM) 생성 도움말"

#: eeschema/dialogs/dialog_bom_base.cpp:27
msgid "BOM generator scripts:"
msgstr "BOM 생성기 스크립트:"

#: eeschema/dialogs/dialog_bom_base.cpp:71
msgid "Add a new BOM generator and its command line to the list"
msgstr "새 BOM 생성기와 명령줄을 리스트에 추가"

#: eeschema/dialogs/dialog_bom_base.cpp:76
msgid "Edit the script file in the text editor"
msgstr "텍스트 편집기에서 스크립트 파일 편집"

#: eeschema/dialogs/dialog_bom_base.cpp:84
msgid "Remove the current generator script from list"
msgstr "현재 편집기 스크립트를 리스트에서 삭제"

#: eeschema/dialogs/dialog_bom_base.cpp:94
msgid "Command line running the generator:"
msgstr "생성기를 실행하는 명령줄:"

#: eeschema/dialogs/dialog_bom_base.cpp:103
msgid "Show console window"
msgstr "콘솔 창 표시"

#: eeschema/dialogs/dialog_bom_base.cpp:104
msgid ""
"By default, command line runs with hidden console window and output is "
"redirected to the info display.\n"
"Set this option to show the window of the running command."
msgstr ""
"기본적으로, 명령줄은 숨겨진 콘솔 창으로 실행되고 출력은 정보 창으로 리디렉션"
"됩니다.\n"
"실행 중인 명령 창을 표시하려면 이 옵션을 설정하십시오."

#: eeschema/dialogs/dialog_bom_base.cpp:115
msgid "Reset the list of BOM generator scripts to the default settings"
msgstr "BOM 생성기 스크립트의 리스트를 초기 설정으로 초기화"

#: eeschema/dialogs/dialog_bom_base.h:81
msgid "Bill of Materials"
msgstr "BOM"

#: eeschema/dialogs/dialog_bom_help_md.h:2
msgid ""
"# 1. Summary\n"
"\n"
"The Bill of Materials tool creates a BOM which lists all of the components "
"in the design.\n"
"\n"
"The tool uses an external script to generate a BOM in the desired output "
"format. Choosing a different script changes how the BOM is formatted.\n"
"\n"
"Generating a BOM is described in more detail in the Schematic Editor "
"manual.\n"
"\n"
"# 2. Usage\n"
"\n"
"Select a generator script in the **BOM generator scripts** list. Details for "
"the selected generator are shown on the right of the dialog.\n"
"\n"
"Clicking the **Generate** button creates a BOM file with the selected "
"generator.\n"
"\n"
"The default settings present several generator script options, although some "
"additional scripts are installed with KiCad and can be added to the list "
"with the **+** button.\n"
"\n"
"**Note:** On Windows, there is an additional option **Show console window**. "
"When this option is unchecked, BOM generators run in a hidden console window "
"and any output is redirected and printed in the dialog. When this option is "
"checked, BOM generators run in a visisble console window.\n"
"\n"
"# 3. Custom generators and command lines\n"
"\n"
"Internally, KiCad creates an intermediate netlist file in XML format that "
"contains information about all of the components in the design. A BOM "
"generator script converts the intermediate netlist file to the desired "
"output format. KiCad runs the BOM generator scripts according to the command "
"line entered at the bottom of the BOM dialog.\n"
"\n"
"The command line format accepts parameters for filenames. Each formatting "
"parameter is replaced with a project-specific path or filename. The "
"supported formatting parameters are:\n"
"\n"
" * `%I`: absolute path and filename of the intermediate netlist file, which "
"is the input to the BOM generator\n"
" * `%O`: absolute path and filename of the output BOM file (without file "
"extension)\n"
" * `%B`: base filename of the output BOM file (without file extension)\n"
" * `%P`: absolute path of the project directory, without trailing slash\n"
"\n"
"**Note:** the `%O` output file parameter does not include a file extension. "
"KiCad will attempt to add an appropriate extension to the command line "
"automatically, but an extension may need to be added by hand.\n"
"\n"
"Python is the recommended tool for BOM generator scripts, but other tools "
"can also be used.\n"
"\n"
"## Example command lines for Python scripts\n"
"\n"
"The command line format for a Python script is of the form:\n"
"\n"
"```\n"
"python <script file name> <input filename> <output filename>\n"
"```\n"
"\n"
"On Windows, if the desired generator script for a CSV BOM is `C:"
"\\Users\\username\\kicad\\my_python_script.py`, the command line would be:\n"
"\n"
"```\n"
"python.exe C:\\Users\\username\\kicad\\my_python_script.py \"%I\" \"%O."
"csv\"\n"
"```\n"
"\n"
"On Linux, if the desired generator script for a CSV BOM is `/home/username/"
"kicad/my_python_script.py`, the command line would be:\n"
"\n"
"```\n"
"python /home/username/kicad/my_python_script.py \"%I\" \"%O.csv\"\n"
"```\n"
"\n"
"Double quotes (`\"`) around the arguments are recommended in case filenames "
"contain spaces or special characters.\n"
msgstr ""
"# 1. 요약\n"
"\n"
"BOM 도구는 설계의 모든 구성요소를 나열하는 BOM을 작성합니다.\n"
"\n"
"이 도구는 외부 스크립트를 사용하여 원하는 출력 형식으로 BOM을 생성합니다. 다"
"른 스크립트를 선택하면 BOM의 형식이 변경됩니다.\n"
"\n"
"BOM 생성은 스키매틱 편집기 매뉴얼에 자세히 설명되어 있습니다.\n"
"\n"
"# 2. 사용법\n"
"\n"
"**BOM 생성기 스크립트** 목록에서 생성기 스크립트를 선택합니다. 선택한 생성기"
"에 대한 세부 정보가 대화상자 오른쪽에 표시됩니다.\n"
"\n"
"**생성** 버튼을 클릭하면 선택한 생성기로 BOM 파일이 생성됩니다.\n"
"\n"
"기본 설정에는 여러 생성기 스크립트 옵션이 있지만 일부 추가 스크립트는 KiCad"
"와 함께 설치되며 **+** 버튼을 사용하여 목록에 추가할 수 있습니다.\n"
"\n"
"**참고:** Windows에는 추가 옵션인 **콘솔 창 표시**가 있습니다. 이 옵션을 선택"
"하지 않으면 BOM 생성기가 숨겨진 콘솔 창에서 실행되고 모든 출력이 리디렉션되"
"어 대화상자에 인쇄됩니다. 이 옵션을 선택하면 BOM 생성기가 가시성 콘솔 창에서 "
"실행됩니다.\n"
"\n"
"# 3. 사용자 지정 생성기 및 명령줄\n"
"\n"
"내부적으로 KiCad는 설계의 모든 구성 요소에 대한 정보가 포함 된 XML 형식의 중"
"간 넷리스트 파일을 만듭니다. BOM 생성기 스크립트는 중간 넷리스트 파일을 원하"
"는 출력 형식으로 변환합니다. KiCad는 BOM 대화상자 하단에 입력한 명령줄에 따"
"라 BOM 생성기 스크립트를 실행합니다.\n"
"\n"
"명령줄 형식은 파일 이름에 대한 매개 변수를 허용합니다. 각 형식 지정 매개 변수"
"는 프로젝트별 경로 또는 파일 이름으로 바뀝니다. 지원되는 형식 매개 변수는 다"
"음과 같습니다.\n"
"\n"
"* '%I': BOM 생성기에 대한 입력인 중간 넷리스트 파일의 절대 경로 및 파일 이"
"름\n"
" * '%O': 출력 BOM 파일의 절대 경로 및 파일 이름(파일 확장자 제외)\n"
" * '%B': 출력 BOM 파일의 기본 파일 이름(파일 확장자 제외)\n"
" * '%P': 후행 슬래시가 없는 프로젝트 디렉터리의 절대 경로\n"
"\n"
"**참고:** '%O' 출력 파일 매개 변수에는 파일 확장자가 포함되어 있지 않습니다. "
"KiCad는 명령 줄에 적절한 확장을 자동으로 추가하려고 시도하지만 확장을 수동으"
"로 추가해야 할 수도 있습니다.\n"
"\n"
"Python은 BOM 생성기 스크립트에 권장되는 도구이지만 다른 도구도 사용할 수 있습"
"니다.\n"
"\n"
"## 파이썬 스크립트에 대한 예제 명령 줄\n"
"\n"
"Python 스크립트의 명령줄 형식은 다음과 같은 형식입니다.\n"
"\n"
"```\n"
"파이썬 <스크립트 파일 이름 > < 입력 파일 이름 > < 출력 파일 이름>\n"
"```\n"
"\n"
"Windows에서 CSV BOM에 대해 원하는 생성기 스크립트가 'C:"
"\\Users\\username\\kicad\\my_python_script.py'인 경우 명령줄은 다음과 같습니"
"다.\n"
"\n"
"```\n"
"python.exe C:\\Users\\username\\kicad\\my_python_script.py \"%I\" \"%O."
"csv\"\n"
"```\n"
"\n"
"Linux에서 CSV BOM에 대해 원하는 생성기 스크립트가 '/home/username/kicad/"
"my_python_script.py'인 경우 명령줄은 다음과 같습니다.\n"
"\n"
"```\n"
"파이썬 / 홈 / 사용자 이름 / kicad / my_python_script.py \"%I\" \"% O .csv\"\n"
"```\n"
"\n"
"인수 주위의 큰따옴표('\"')는 파일 이름에 공백이나 특수 문자가 포함된 경우에 "
"권장됩니다.\n"

#: eeschema/dialogs/dialog_change_symbols.cpp:66
msgid "Change all symbols in schematic"
msgstr "회로도 내의 모든 심볼 바꾸기"

#: eeschema/dialogs/dialog_change_symbols.cpp:67
#: eeschema/dialogs/dialog_change_symbols.cpp:426
msgid "Change Symbols"
msgstr "심볼 바꾸기"

#: eeschema/dialogs/dialog_change_symbols.cpp:76
msgid "Change selected symbol(s)"
msgstr "선택한 심볼 바꾸기"

#: eeschema/dialogs/dialog_change_symbols.cpp:93
msgid "Change symbols matching reference designator:"
msgstr "참조 지정자와 일치하는 심볼 변경:"

#: eeschema/dialogs/dialog_change_symbols.cpp:94
msgid "Change symbols matching value:"
msgstr "값과 일치하는 심볼 변경:"

#: eeschema/dialogs/dialog_change_symbols.cpp:95
msgid "Change symbols matching library identifier:"
msgstr "라이브러리 식별자와 일치하는 심볼 변경:"

#: eeschema/dialogs/dialog_change_symbols.cpp:132
msgid "Update Fields"
msgstr "필드 업데이트"

#: eeschema/dialogs/dialog_change_symbols.cpp:133
msgid "Remove fields if not in new symbol"
msgstr "새 심볼에 없는 경우 필드 제거"

#: eeschema/dialogs/dialog_change_symbols.cpp:134
msgid "Reset fields if empty in new symbol"
msgstr "새 심볼에 비어있는 경우 필드 초기화"

#: eeschema/dialogs/dialog_change_symbols.cpp:135
msgid "Update field text"
msgstr "필드 텍스트 수정"

#: eeschema/dialogs/dialog_change_symbols.cpp:136
msgid "Update field visibilities"
msgstr "필드 가시성 수정"

#: eeschema/dialogs/dialog_change_symbols.cpp:137
msgid "Update field sizes and styles"
msgstr "필드 크기 및 스타일 수정"

#: eeschema/dialogs/dialog_change_symbols.cpp:138
msgid "Update field positions"
msgstr "필드 위치 수정"

#: eeschema/dialogs/dialog_change_symbols.cpp:139
msgid "Update symbol attributes"
msgstr "심볼 속성 수정"

#: eeschema/dialogs/dialog_change_symbols.cpp:154
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:154
msgid "Change"
msgstr "바꾸기"

#: eeschema/dialogs/dialog_change_symbols.cpp:154
#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:44
#: kicad/pcm/dialogs/dialog_pcm.cpp:110 kicad/pcm/dialogs/panel_package.cpp:66
#: kicad/pcm/dialogs/panel_package.cpp:127
#: kicad/pcm/dialogs/panel_package.cpp:152
#: kicad/pcm/dialogs/panel_package.cpp:160
#: kicad/pcm/dialogs/panel_package_base.cpp:75
#: kicad/pcm/dialogs/panel_packages_view.cpp:719
#: pcbnew/dialogs/dialog_exchange_footprints.cpp:154
msgid "Update"
msgstr "수정"

#: eeschema/dialogs/dialog_change_symbols.cpp:426
msgid "Update Symbols"
msgstr "심볼 업데이트"

#: eeschema/dialogs/dialog_change_symbols.cpp:533
msgid "*** No symbols matching criteria found ***"
msgstr "*** 기준과 일치하는 심볼을 찾을 수 없음 ***"

#: eeschema/dialogs/dialog_change_symbols.cpp:569
msgid "*** symbol not found ***"
msgstr "*** 심볼을 찾을 수 없음 ***"

#: eeschema/dialogs/dialog_change_symbols.cpp:580
msgid "*** new symbol has too few units ***"
msgstr "*** 새 심볼에 단위가 너무 적습니다 ***"

#: eeschema/dialogs/dialog_change_symbols.cpp:773
#, c-format
msgid "Update symbol %s from '%s' to '%s'"
msgstr "심볼 %s을(를) '%s'에서 '%s'(으)로 업데이트"

#: eeschema/dialogs/dialog_change_symbols.cpp:780
#, c-format
msgid "Update symbols %s from '%s' to '%s'"
msgstr "심볼 %s을(를) '%s'에서 '%s'(으)로 업데이트"

#: eeschema/dialogs/dialog_change_symbols.cpp:790
#, c-format
msgid "Change symbol %s from '%s' to '%s'"
msgstr "심볼 %s을(를) '%s'에서 '%s'(으)로 변경"

#: eeschema/dialogs/dialog_change_symbols.cpp:797
#, c-format
msgid "Change symbols %s from '%s' to '%s'"
msgstr "심볼 %s을(를) '%s'에서 '%s'(으)로 변경"

#: eeschema/dialogs/dialog_change_symbols_base.cpp:28
msgid "Update all symbols in schematic"
msgstr "회로도의 모든 심볼 업데이트"

#: eeschema/dialogs/dialog_change_symbols_base.cpp:31
msgid "Update selected symbol(s)"
msgstr "선택한 심볼 업데이트"

#: eeschema/dialogs/dialog_change_symbols_base.cpp:34
msgid "Update symbols matching reference designator:"
msgstr "참조 지정자와 일치하는 심볼 업데이트:"

#: eeschema/dialogs/dialog_change_symbols_base.cpp:40
msgid "Update symbols matching value:"
msgstr "값과 일치하는 심볼 업데이트:"

#: eeschema/dialogs/dialog_change_symbols_base.cpp:46
msgid "Update symbols matching library identifier:"
msgstr "라이브러리 식별자와 일치하는 심볼 업데이트:"

#: eeschema/dialogs/dialog_change_symbols_base.cpp:73
msgid "New library identifier:"
msgstr "새 라이브러리 식별자:"

#: eeschema/dialogs/dialog_change_symbols_base.cpp:95
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:36
msgid "Update/reset Fields"
msgstr "필드 업데이트 / 초기화"

#: eeschema/dialogs/dialog_change_symbols_base.cpp:109
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:50
msgid "Select None"
msgstr "선택 안 함"

#: eeschema/dialogs/dialog_change_symbols_base.cpp:118
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:59
#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:95
msgid "Update Options"
msgstr "업데이트 설정"

#: eeschema/dialogs/dialog_change_symbols_base.cpp:120
msgid "Remove fields if not in library symbol"
msgstr "라이브러리 심볼에 없는 경우 필드 제거"

#: eeschema/dialogs/dialog_change_symbols_base.cpp:121
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:62
#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:98
msgid "Removes fields that do not occur in the original library symbols"
msgstr "원본 라이브러리 심볼에 없는 필드를 제거"

#: eeschema/dialogs/dialog_change_symbols_base.cpp:125
msgid "Reset fields if empty in library symbol"
msgstr "라이브러리 심볼이 비어있을 경우 필드 초기화"

#: eeschema/dialogs/dialog_change_symbols_base.cpp:131
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:72
msgid "Update/reset field text"
msgstr "필드 텍스트 업데이트 / 초기화"

#: eeschema/dialogs/dialog_change_symbols_base.cpp:134
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:75
msgid "Update/reset field visibilities"
msgstr "필드 가시성 업데이트 / 초기화"

#: eeschema/dialogs/dialog_change_symbols_base.cpp:137
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:78
msgid "Update/reset field sizes and styles"
msgstr "필드 크기와 스타일 업데이트 / 초기화"

#: eeschema/dialogs/dialog_change_symbols_base.cpp:140
#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:81
msgid "Update/reset field positions"
msgstr "필드 위치 업데이트 / 초기화"

#: eeschema/dialogs/dialog_change_symbols_base.cpp:146
msgid "Update/reset symbol attributes"
msgstr "심볼 속성 업데이트 / 초기화"

#: eeschema/dialogs/dialog_change_symbols_base.h:101
msgid "Update Symbols from Library"
msgstr "심볼 라이브러리 업데이트"

#: eeschema/dialogs/dialog_database_lib_settings.cpp:98
msgid "Connected to database successfully"
msgstr "데이터베이스에 성공적으로 연결됨"

#: eeschema/dialogs/dialog_database_lib_settings.cpp:106
#, c-format
msgid "Database connection failed: %s"
msgstr "데이터베이스 연결 실패: %s"

#: eeschema/dialogs/dialog_database_lib_settings.cpp:117
msgid "No connection to database"
msgstr "데이터베이스에 연결되지 않음"

#: eeschema/dialogs/dialog_database_lib_settings.cpp:124
#, c-format
msgid "Loaded %zu libraries"
msgstr "로드된 %zu 라이브러리"

#: eeschema/dialogs/dialog_database_lib_settings_base.cpp:39
msgid "DSN:"
msgstr "DSN:"

#: eeschema/dialogs/dialog_database_lib_settings_base.cpp:45
msgid "Username:"
msgstr "사용자 이름:"

#: eeschema/dialogs/dialog_database_lib_settings_base.cpp:54
msgid "Password:"
msgstr "비밀번호:"

#: eeschema/dialogs/dialog_database_lib_settings_base.cpp:71
msgid "Connection String:"
msgstr "연결 문자열:"

#: eeschema/dialogs/dialog_database_lib_settings_base.cpp:99
#: eeschema/symbol_editor/symbol_edit_frame.cpp:202
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1251
#: pcbnew/footprint_edit_frame.cpp:228 pcbnew/footprint_edit_frame.cpp:904
msgid "Libraries"
msgstr "라이브러리"

#: eeschema/dialogs/dialog_database_lib_settings_base.cpp:104
msgid "Reload Configuration"
msgstr "설정 재 로드"

#: eeschema/dialogs/dialog_database_lib_settings_base.cpp:105
msgid "Reload the database library configuration file"
msgstr "데이터베이스 라이브러리 설정 파일 재 로드"

#: eeschema/dialogs/dialog_database_lib_settings_base.cpp:120
msgid "Caching"
msgstr "캐싱"

#: eeschema/dialogs/dialog_database_lib_settings_base.cpp:127
msgid "Cache size:"
msgstr "캐시 크기:"

#: eeschema/dialogs/dialog_database_lib_settings_base.cpp:129
#: eeschema/dialogs/dialog_database_lib_settings_base.cpp:134
msgid "How many database queries to cache"
msgstr "캐시할 데이터베이스 쿼리 수"

#: eeschema/dialogs/dialog_database_lib_settings_base.cpp:138
msgid "Cache timeout:"
msgstr "캐시 시간 초과:"

#: eeschema/dialogs/dialog_database_lib_settings_base.cpp:140
#: eeschema/dialogs/dialog_database_lib_settings_base.cpp:145
msgid "Time in seconds that database queries will be cached for"
msgstr "데이터베이스 쿼리가 캐시되는 시간(초)"

#: eeschema/dialogs/dialog_database_lib_settings_base.h:79
msgid "Database Library Settings"
msgstr "데이터베이스 라이브러리 설정"

#: eeschema/dialogs/dialog_edit_symbols_libid.cpp:546
#, c-format
msgid "Symbol library identifier %s is not valid."
msgstr "심볼 라이브러리 식별자 %s이(가) 잘못되었습니다."

#: eeschema/dialogs/dialog_edit_symbols_libid.cpp:643
#, c-format
msgid "Available Candidates for %s "
msgstr "%s에 사용 가능한 후보들 "

#: eeschema/dialogs/dialog_edit_symbols_libid.cpp:647
#, c-format
msgid "Candidates count %d "
msgstr "후보 개수 %d "

#: eeschema/dialogs/dialog_edit_symbols_libid.cpp:658
#, c-format
msgid "%u link(s) mapped, %u not found"
msgstr "%u 링크가 매핑 됨, %u 을 찾을 수 없음"

#: eeschema/dialogs/dialog_edit_symbols_libid.cpp:664
#, c-format
msgid "All %u link(s) resolved"
msgstr "모든 %u개의 링크가 확인됨"

#: eeschema/dialogs/dialog_edit_symbols_libid.cpp:691
msgid "Invalid symbol library identifier"
msgstr "잘못된 심볼 라이브러리 식별자"

#: eeschema/dialogs/dialog_edit_symbols_libid.cpp:742
#, c-format
msgid ""
"Error loading symbol %s from library %s.\n"
"\n"
"%s"
msgstr ""
"%s 심볼을 %s 라이브러리에서 불러오는 중 오류 발생.\n"
"\n"
"%s"

#: eeschema/dialogs/dialog_edit_symbols_libid_base.cpp:37
#: eeschema/dialogs/panel_setup_formatting_base.cpp:114
#: eeschema/sch_symbol.cpp:2473 eeschema/widgets/search_handlers.cpp:128
msgid "Symbols"
msgstr "심볼"

#: eeschema/dialogs/dialog_edit_symbols_libid_base.cpp:38
msgid "Current Library Reference"
msgstr "현재 라이브러리 참조"

#: eeschema/dialogs/dialog_edit_symbols_libid_base.cpp:39
msgid "New Library Reference"
msgstr "새 라이브러리 참조"

#: eeschema/dialogs/dialog_edit_symbols_libid_base.cpp:58
msgid "Map Orphans"
msgstr "고립된 항목 매핑"

#: eeschema/dialogs/dialog_edit_symbols_libid_base.cpp:59
msgid ""
"If some symbols are orphaned (the linked symbol is not found anywhere),\n"
"try to find a candidate having the same name in one of loaded symbol "
"libraries."
msgstr ""
"특정 심볼이 고립되었을 경우 (연결된 심볼을 어디서도 찾을 수 없는 경우),\n"
"불러온 심볼 라이브러리 내에서 같은 이름을 가진 후보를 찾습니다."

#: eeschema/dialogs/dialog_edit_symbols_libid_base.cpp:63
msgid "Update symbol fields from new library"
msgstr "새 라이브러리에서 심볼 필드 업데이트"

#: eeschema/dialogs/dialog_edit_symbols_libid_base.cpp:64
msgid ""
"Replace current symbols fields by fields from the new library.\n"
"Warning: fields \"Value\" and \"Footprints\" will be therefore replaced."
msgstr ""
"현재 심볼 필드를 새 라이브러리의 필드로 바꿉니다.\n"
"경고: 따라서 \"값\" 및 \"풋프린트\" 필드가 대체됩니다."

#: eeschema/dialogs/dialog_edit_symbols_libid_base.h:57
msgid "Symbol Library References"
msgstr "심볼 라이브러리 참조"

#: eeschema/dialogs/dialog_erc.cpp:106
msgid "Run ERC"
msgstr "ERC 실행"

#: eeschema/dialogs/dialog_erc.cpp:158
msgid "Show Annotation dialog"
msgstr "주석 대화 상자 표시"

#: eeschema/dialogs/dialog_erc.cpp:171
msgid "Schematic is not fully annotated. ERC results will be incomplete."
msgstr ""
"회로도가 완전히 주석 처리되지 않았습니다. ERC 결과는 불완전할 것입니다."

#: eeschema/dialogs/dialog_erc.cpp:302 pcbnew/dialogs/dialog_drc.cpp:1089
msgid "Delete exclusions too?"
msgstr "제외 항목도 삭제 하시겠습니까?"

#: eeschema/dialogs/dialog_erc.cpp:302 eeschema/dialogs/dialog_erc_base.cpp:174
#: pcbnew/dialogs/dialog_drc.cpp:1089 pcbnew/dialogs/dialog_drc_base.cpp:221
#: pcbnew/dialogs/dialog_footprint_checker_base.cpp:79
msgid "Delete All Markers"
msgstr "모든 마커 삭제"

#: eeschema/dialogs/dialog_erc.cpp:304 pcbnew/dialogs/dialog_drc.cpp:1091
msgid "Errors and Warnings Only"
msgstr "오류 및 경고에 한함"

#: eeschema/dialogs/dialog_erc.cpp:305 pcbnew/dialogs/dialog_drc.cpp:1092
msgid "Errors, Warnings and Exclusions"
msgstr "오류, 경고 및 예외"

#: eeschema/dialogs/dialog_erc.cpp:434
#, c-format
msgid "%d symbol(s) require annotation.<br><br>"
msgstr "%d개의 심볼에 주석이 필요합니다.<br><br>"

#: eeschema/dialogs/dialog_erc.cpp:438
msgid "-------- ERC cancelled by user.<br><br>"
msgstr "-------- 사용자가 ERC를 취소했습니다.<br><br>"

#: eeschema/dialogs/dialog_erc.cpp:440 pcbnew/dialogs/dialog_drc.cpp:325
msgid "Done.<br><br>"
msgstr "완료되었습니다.<br><br>"

#: eeschema/dialogs/dialog_erc.cpp:597 pcbnew/dialogs/dialog_drc.cpp:584
msgid "errors"
msgstr "오류"

#: eeschema/dialogs/dialog_erc.cpp:598 pcbnew/dialogs/dialog_drc.cpp:585
msgid "warnings"
msgstr "경고"

#: eeschema/dialogs/dialog_erc.cpp:599 pcbnew/dialogs/dialog_drc.cpp:586
msgid "appropriate"
msgstr "적절함"

#: eeschema/dialogs/dialog_erc.cpp:604 pcbnew/dialogs/dialog_drc.cpp:591
msgid "Remove exclusion for this violation"
msgstr "해당 위반에 대한 예외를 삭제"

#: eeschema/dialogs/dialog_erc.cpp:605 pcbnew/dialogs/dialog_drc.cpp:592
#, c-format
msgid "It will be placed back in the %s list"
msgstr "%s 리스트에 다시 배치됩니다"

#: eeschema/dialogs/dialog_erc.cpp:609 pcbnew/dialogs/dialog_drc.cpp:603
msgid "Exclude this violation"
msgstr "이 위반 제외"

#: eeschema/dialogs/dialog_erc.cpp:610 pcbnew/dialogs/dialog_drc.cpp:604
#, c-format
msgid "It will be excluded from the %s list"
msgstr "%s 목록에서 제외됩니다"

#: eeschema/dialogs/dialog_erc.cpp:622 pcbnew/dialogs/dialog_drc.cpp:643
#, c-format
msgid "Change severity to Error for all '%s' violations"
msgstr "모든 '%s' 위반에 대한 심각도를 오류로 변경"

#: eeschema/dialogs/dialog_erc.cpp:624 eeschema/dialogs/dialog_erc.cpp:630
msgid ""
"Violation severities can also be edited in the Schematic Setup... dialog"
msgstr "위반 심각도는 회로도 설정... 대화 상자에서도 변경할 수 있음"

#: eeschema/dialogs/dialog_erc.cpp:628 pcbnew/dialogs/dialog_drc.cpp:650
#, c-format
msgid "Change severity to Warning for all '%s' violations"
msgstr "모든 '%s' 위반에 대한 심각도를 경고로 변경"

#: eeschema/dialogs/dialog_erc.cpp:633 pcbnew/dialogs/dialog_drc.cpp:656
#, c-format
msgid "Ignore all '%s' violations"
msgstr "모든 '%s' 위반 무시"

#: eeschema/dialogs/dialog_erc.cpp:634 pcbnew/dialogs/dialog_drc.cpp:658
msgid "Violations will not be checked or reported"
msgstr "위반 사항을 확인하거나 보고하지 않음"

#: eeschema/dialogs/dialog_erc.cpp:641
msgid "Edit pin-to-pin conflict map..."
msgstr "핀 간 충돌 표시 편집..."

#: eeschema/dialogs/dialog_erc.cpp:645 pcbnew/dialogs/dialog_drc.cpp:663
msgid "Edit violation severities..."
msgstr "위반 심각도 변경..."

#: eeschema/dialogs/dialog_erc.cpp:646 eeschema/dialogs/dialog_erc.cpp:652
msgid "Open the Schematic Setup... dialog"
msgstr "회로도 설정... 대화 창 열기"

#: eeschema/dialogs/dialog_erc.cpp:651
msgid "Edit connection grid spacing..."
msgstr "연결 그리드 간격 편집..."

#: eeschema/dialogs/dialog_erc.cpp:744
#: eeschema/dialogs/dialog_schematic_setup.cpp:96
msgid "Pin Conflicts Map"
msgstr "핀 충돌 표시"

#: eeschema/dialogs/dialog_erc.cpp:748 eeschema/dialogs/dialog_erc.cpp:847
#: eeschema/dialogs/dialog_schematic_setup.cpp:89
#: pcbnew/dialogs/dialog_board_setup.cpp:202 pcbnew/dialogs/dialog_drc.cpp:826
#: pcbnew/dialogs/dialog_drc.cpp:841
msgid "Violation Severity"
msgstr "위반 심각도"

#: eeschema/dialogs/dialog_erc.cpp:752
#: eeschema/dialogs/dialog_label_properties_base.cpp:185
#: eeschema/dialogs/dialog_schematic_setup.cpp:60
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:74
#: pcbnew/dialogs/dialog_board_setup.cpp:134
msgid "Formatting"
msgstr "서식"

#: eeschema/dialogs/dialog_erc.cpp:922 pcbnew/dialogs/dialog_gendrill.cpp:487
#, c-format
msgid "Report file '%s' created."
msgstr "보고서 파일 '%s' 생성됨."

#: eeschema/dialogs/dialog_erc_base.cpp:59
#: pcbnew/dialogs/dialog_drc_base.cpp:77
msgid "Tests Running..."
msgstr "테스트 실행 중..."

#: eeschema/dialogs/dialog_erc_base.cpp:67
#: eeschema/dialogs/dialog_erc_base.cpp:116
#: eeschema/dialogs/dialog_sim_command_base.cpp:101
#: eeschema/dialogs/dialog_sim_command_base.cpp:231
#: eeschema/dialogs/dialog_sim_command_base.cpp:240
#: eeschema/dialogs/dialog_sim_command_base.cpp:315
#: eeschema/dialogs/dialog_sim_command_base.cpp:349
#: eeschema/dialogs/dialog_sim_command_base.cpp:467
#: eeschema/dialogs/dialog_sim_command_base.cpp:533
#: eeschema/dialogs/dialog_sim_command_base.cpp:554
#: eeschema/dialogs/dialog_sim_command_base.cpp:636
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:180
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:246
#: eeschema/dialogs/panel_setup_buses_base.cpp:150
#: eeschema/dialogs/panel_setup_buses_base.cpp:154
#: pcbnew/dialogs/dialog_drc_base.cpp:85 pcbnew/dialogs/dialog_drc_base.cpp:166
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:107
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:139
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:176
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:232
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:307
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1022
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1042
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1079
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1091
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1103
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1112
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1124
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1136
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1148
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1160
#: pcbnew/dialogs/panel_edit_options_base.cpp:277
#: pcbnew/dialogs/panel_edit_options_base.cpp:395
#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:28
#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:167
msgid "a page"
msgstr "페이지"

#: eeschema/dialogs/dialog_erc_base.cpp:78
#: pcbnew/dialogs/dialog_drc_base.cpp:99
#: pcbnew/dialogs/dialog_generators_base.cpp:31
msgid "Click on items to highlight them on the board."
msgstr "항목을 클릭하여 보드에서 강조 표시합니다."

#: eeschema/dialogs/dialog_erc_base.cpp:90
#: pcbnew/dialogs/dialog_drc_base.cpp:110
#, c-format
msgid "Violations (%s)"
msgstr "위반 (%s)"

#: eeschema/dialogs/dialog_erc_base.cpp:98
#: pcbnew/dialogs/dialog_drc_base.cpp:148
msgid "Edit ignored tests"
msgstr "무시된 테스트 편집"

#: eeschema/dialogs/dialog_erc_base.cpp:108
#: pcbnew/dialogs/dialog_drc_base.cpp:158
#, c-format
msgid "Ignored Tests (%s)"
msgstr "무시된 테스트(%s)"

#: eeschema/dialogs/dialog_erc_base.cpp:148
#: pcbnew/dialogs/dialog_drc_base.cpp:198
#: pcbnew/dialogs/dialog_footprint_checker_base.cpp:55
msgid "Exclusions"
msgstr "제외"

#: eeschema/dialogs/dialog_erc_base.cpp:171
#: pcbnew/dialogs/dialog_drc_base.cpp:218
#: pcbnew/dialogs/dialog_footprint_checker_base.cpp:76
msgid "Delete Marker"
msgstr "마커 삭제"

#: eeschema/dialogs/dialog_erc_base.h:100 eeschema/tools/ee_actions.cpp:46
msgid "Electrical Rules Checker"
msgstr "전기 규칙 검사기 (ERC)"

#: eeschema/dialogs/dialog_export_netlist.cpp:274
#: eeschema/dialogs/dialog_export_netlist_base.h:73
msgid "Export Netlist"
msgstr "네트리스트 내보내기"

#: eeschema/dialogs/dialog_export_netlist.cpp:301
#: eeschema/dialogs/dialog_export_netlist.cpp:351
msgid "Use current sheet as root"
msgstr "현재 시트를 루트로 사용"

#: eeschema/dialogs/dialog_export_netlist.cpp:302
#: eeschema/dialogs/dialog_export_netlist.cpp:352
msgid "Export netlist only for the current sheet"
msgstr "현재 시트만 내보내기"

#: eeschema/dialogs/dialog_export_netlist.cpp:307
#: eeschema/dialogs/dialog_sim_command_base.cpp:647
msgid "Save all voltages"
msgstr "모든 전압 저장"

#: eeschema/dialogs/dialog_export_netlist.cpp:308
msgid "Write a directive to save all voltages (.save all)"
msgstr "모든 전압을 저장하는 지시문 작성(.save all)"

#: eeschema/dialogs/dialog_export_netlist.cpp:313
#: eeschema/dialogs/dialog_sim_command_base.cpp:650
msgid "Save all currents"
msgstr "모든 전류 저장"

#: eeschema/dialogs/dialog_export_netlist.cpp:314
msgid "Write a directive to save all currents (.probe alli)"
msgstr "모든 전류를 저장하는 지시문 작성(.probe alli)"

#: eeschema/dialogs/dialog_export_netlist.cpp:319
#: eeschema/dialogs/dialog_sim_command_base.cpp:653
msgid "Save all power dissipations"
msgstr "모든 전원 분산 저장"

#: eeschema/dialogs/dialog_export_netlist.cpp:320
msgid ""
"Write directives to save power dissipation of all items (.probe p(<item>))"
msgstr "모든 항목의 전력 소모를 줄이기 위한 지시문 작성(.probe p(<item>))"

#: eeschema/dialogs/dialog_export_netlist.cpp:326
msgid "Run external simulator command:"
msgstr "외부 시뮬레이터 명령 실행:"

#: eeschema/dialogs/dialog_export_netlist.cpp:328
msgid ""
"Enter the command line to run SPICE\n"
"Usually '<path to SPICE binary> \"%I\"'\n"
"%I will be replaced by the netlist filepath"
msgstr ""
"명령줄을 입력하여 SPICE를 실행함\n"
"일반적으로 '<SPICE 바이너리 경로> \"%I\"'\n"
"%I는 네트리스트 파일 경로로 대체됨"

#: eeschema/dialogs/dialog_export_netlist.cpp:401
msgid "Netlist command:"
msgstr "네트리스트 명령:"

#: eeschema/dialogs/dialog_export_netlist.cpp:460
msgid "Save Netlist File"
msgstr "네트리스트 파일 저장"

#: eeschema/dialogs/dialog_export_netlist.cpp:517
#, c-format
msgid "%s Export"
msgstr "%s 내보내기"

#: eeschema/dialogs/dialog_export_netlist.cpp:556
#: eeschema/netlist_exporters/netlist_generator.cpp:54
msgid "Exporting netlist requires a fully annotated schematic."
msgstr "네트리스트를 내보내기 위해선 완전히 주석 처리된 회로도가 필요합니다."

#: eeschema/dialogs/dialog_export_netlist.cpp:606
msgid "external simulator not found"
msgstr "외부 시뮬레이터를 찾을 수 없음"

#: eeschema/dialogs/dialog_export_netlist.cpp:607
msgid ""
"Note: command line is usually: <tt>&lt;path to SPICE binary&gt; \"%I\"</tt>"
msgstr ""
"참고 : 명령 줄은 일반적으로 <tt> &lt; SPICE 바이너리 경로 &gt; \"%I\"</tt>임"

#: eeschema/dialogs/dialog_export_netlist.cpp:613
msgid "external simulator has the wrong format or architecture"
msgstr "외부 시뮬레이터에 잘못된 형식 또는 아키텍처가 있음"

#: eeschema/dialogs/dialog_export_netlist.cpp:618
msgid "permission denied"
msgstr "권한이 거부됨"

#: eeschema/dialogs/dialog_export_netlist.cpp:765
msgid "This plugin already exists."
msgstr "플러그인이 이미 존재합니다."

#: eeschema/dialogs/dialog_export_netlist.cpp:798
msgid "You must provide a netlist generator command string"
msgstr "네트리스트 생성기 명령 문자열을 제출해야 합니다"

#: eeschema/dialogs/dialog_export_netlist.cpp:804
msgid "You must provide a netlist generator title"
msgstr "네트리스트 생성기 제목을 제출해야 합니다"

#: eeschema/dialogs/dialog_export_netlist_base.cpp:52
msgid "Add Generator..."
msgstr "생성기 추가..."

#: eeschema/dialogs/dialog_export_netlist_base.cpp:55
msgid "Remove Generator"
msgstr "생성기 제거"

#: eeschema/dialogs/dialog_export_netlist_base.cpp:103
msgid "Command line to run the generator:"
msgstr "생성기를 실행시키기 위한 명령줄:"

#: eeschema/dialogs/dialog_export_netlist_base.cpp:118
msgid "Browse Generators..."
msgstr "생성기 탐색..."

#: eeschema/dialogs/dialog_export_netlist_base.h:112
msgid "Script Generator Properties"
msgstr "스크립트 생성기 속성"

#: eeschema/dialogs/dialog_field_properties.cpp:361
msgid "Illegal reference designator value!"
msgstr "참조 지정자 값이 잘못되었습니다!"

#: eeschema/dialogs/dialog_field_properties.cpp:519
msgid "Sheet filename can only be modified in Sheet Properties dialog."
msgstr "시트 파일명은 시트 설정 대화 상자에서만 변경할 수 있습니다."

#: eeschema/dialogs/dialog_field_properties.cpp:596
#: eeschema/dialogs/dialog_label_properties.cpp:480
msgid ""
"Intersheet reference visibility is controlled globally from Schematic Setup "
"> General > Formatting"
msgstr "시트 간 참조 가시성은 회로도 설정 > 일반 > 서식에서 전역적으로 제어됨"

#: eeschema/dialogs/dialog_field_properties_base.cpp:78
#, c-format
msgid "(%s)"
msgstr "(%s)"

#: eeschema/dialogs/dialog_field_properties_base.cpp:94
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:320
msgid "Show field name"
msgstr "필드 이름 표시"

#: eeschema/dialogs/dialog_field_properties_base.cpp:96
msgid "Show the field name in addtion to its value"
msgstr "값과 함께 필드 이름 표시"

#: eeschema/dialogs/dialog_field_properties_base.cpp:103
msgid "Allow automatic placement"
msgstr "자동 배치 허용"

#: eeschema/dialogs/dialog_field_properties_base.cpp:106
msgid "Allow automatic placement of this field in the schematic"
msgstr "회로도에서 이 필드의 자동 배치 허용"

#: eeschema/dialogs/dialog_field_properties_base.cpp:119
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:173
#: eeschema/dialogs/dialog_label_properties_base.cpp:191
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:68
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:65
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:81
#: eeschema/dialogs/dialog_text_properties_base.cpp:89
#: pagelayout_editor/dialogs/properties_frame_base.cpp:151
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:216
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:176
#: pcbnew/dialogs/dialog_text_properties_base.cpp:110
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:85
msgid "Font:"
msgstr "폰트:"

#: eeschema/dialogs/dialog_field_properties_base.cpp:123
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:177
#: eeschema/dialogs/dialog_label_properties_base.cpp:195
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:72
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:69
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:85
#: eeschema/dialogs/dialog_text_properties_base.cpp:93
#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:44
#: pagelayout_editor/dialogs/properties_frame_base.cpp:155
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:220
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:180
#: pcbnew/dialogs/dialog_text_properties_base.cpp:114
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:89
msgid "KiCad Font"
msgstr "KiCad 글꼴"

#: eeschema/dialogs/dialog_field_properties_base.cpp:153
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:117
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:99
#: eeschema/dialogs/dialog_text_properties_base.cpp:123
#: eeschema/sch_label.cpp:1212 eeschema/sch_text.cpp:419
msgid "Align left"
msgstr "왼쪽 정렬"

#: eeschema/dialogs/dialog_field_properties_base.cpp:158
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:122
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:104
#: eeschema/dialogs/dialog_text_properties_base.cpp:128
msgid "Align horizontal center"
msgstr "수평 중앙 정렬"

#: eeschema/dialogs/dialog_field_properties_base.cpp:163
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:127
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:109
#: eeschema/dialogs/dialog_text_properties_base.cpp:133
#: eeschema/sch_label.cpp:1210 eeschema/sch_text.cpp:421
msgid "Align right"
msgstr "오른쪽 정렬"

#: eeschema/dialogs/dialog_field_properties_base.cpp:173
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:137
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:119
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:124
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:129
#: eeschema/dialogs/dialog_text_properties_base.cpp:143
#: eeschema/sch_label.cpp:1213
msgid "Align top"
msgstr "위쪽 정렬"

#: eeschema/dialogs/dialog_field_properties_base.cpp:178
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:142
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:144
#: eeschema/dialogs/dialog_text_properties_base.cpp:148
msgid "Align vertical center"
msgstr "수직 중앙 정렬"

#: eeschema/dialogs/dialog_field_properties_base.cpp:183
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:147
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:139
#: eeschema/dialogs/dialog_text_properties_base.cpp:153
#: eeschema/sch_label.cpp:1211
msgid "Align bottom"
msgstr "아래쪽 정렬"

#: eeschema/dialogs/dialog_field_properties_base.cpp:193
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:87
#: eeschema/dialogs/dialog_text_properties_base.cpp:163
msgid "Horizontal text"
msgstr "가로 텍스트"

#: eeschema/dialogs/dialog_field_properties_base.cpp:198
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:92
#: eeschema/dialogs/dialog_text_properties_base.cpp:168
msgid "Vertical text"
msgstr "세로 텍스트"

#: eeschema/dialogs/dialog_field_properties_base.cpp:210
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:198
#: eeschema/dialogs/dialog_label_properties_base.cpp:246
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:159
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:167
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:117
#: eeschema/dialogs/dialog_text_properties_base.cpp:180
msgid "Text size:"
msgstr "텍스트 크기:"

#: eeschema/dialogs/dialog_field_properties_base.cpp:224
#: eeschema/dialogs/dialog_junction_props_base.cpp:38
#: eeschema/dialogs/dialog_label_properties_base.cpp:260
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:65
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:173
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:181
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:224
#: eeschema/dialogs/dialog_line_properties_base.cpp:45
#: eeschema/dialogs/dialog_shape_properties_base.cpp:56
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:131
#: eeschema/dialogs/dialog_text_properties_base.cpp:194
#: eeschema/dialogs/dialog_text_properties_base.cpp:234
#: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:45
msgid "Color:"
msgstr "색:"

#: eeschema/dialogs/dialog_field_properties_base.cpp:247
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:286
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:59
#: pcbnew/dialogs/dialog_reference_image_properties_base.cpp:32
#: pcbnew/dialogs/dialog_text_properties_base.cpp:207
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:196
msgid "Position X:"
msgstr "위치 X:"

#: eeschema/dialogs/dialog_field_properties_base.cpp:258
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:312
#: pcbnew/dialogs/dialog_reference_image_properties_base.cpp:43
#: pcbnew/dialogs/dialog_text_properties_base.cpp:220
msgid "Position Y:"
msgstr "위치 Y:"

#: eeschema/dialogs/dialog_field_properties_base.cpp:269
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:199
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:288
msgid "Common to all units"
msgstr "모든 유닛에 공통"

#: eeschema/dialogs/dialog_field_properties_base.cpp:272
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:202
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:291
msgid "Common to all body styles"
msgstr "모든 바디 스타일에 공통"

#: eeschema/dialogs/dialog_field_properties_base.h:101
#: eeschema/dialogs/dialog_lib_text_properties_base.h:88
msgid "Text Item Properties"
msgstr "텍스트 항목 속성"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics.cpp:597
msgid "Edit Text and Graphics"
msgstr "텍스트와 그래픽 편집"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:33
msgid "Other symbol fields"
msgstr "그 외의 심볼 필드"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:39
msgid "Wires && wire labels"
msgstr "와이어 및 와이어 라벨"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:42
msgid "Buses && bus labels"
msgstr "버스와 버스 라벨"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:51
msgid "Label fields"
msgstr "레이블 필드"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:57
msgid "Sheet titles"
msgstr "시트 제목"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:60
msgid "Other sheet fields"
msgstr "그 외의 시트 필드"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:66
msgid "Sheet borders && backgrounds"
msgstr "시트 테두리 && 배경"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:79
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:59
msgid "Filters"
msgstr "필터"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:87
msgid "Filter fields by name:"
msgstr "이름으로 필드 필터링:"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:99
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:79
msgid "Filter items by parent reference designator:"
msgstr "상위 참조 지정자로 항목 필터링:"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:107
msgid "Filter items by parent symbol library id:"
msgstr "상위 심볼 라이브러리 ID로 항목 필터링:"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:113
msgid "Filter items by parent symbol type:"
msgstr "상위 심볼 유형별로 항목 필터링:"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:116
msgid "Non-power symbols"
msgstr "비전원 심볼"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:116
msgid "Power symbols"
msgstr "전원 심볼"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:128
#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:58
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:51
msgid "Filter items by net:"
msgstr "네트 항목으로 필터링:"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:140
#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:102
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:91
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:121
msgid "Selected items only"
msgstr "선택한 항목만"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:159
msgid "Set To"
msgstr "설정"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:189
msgid "Text color:"
msgstr "텍스트 색상:"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:242
#: eeschema/lib_pin.cpp:1658 eeschema/pin_type.cpp:107
msgid "Up"
msgstr "위쪽"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:242
#: eeschema/lib_pin.cpp:1659 eeschema/pin_type.cpp:108
msgid "Down"
msgstr "아래쪽"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:242
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:283
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:307
#: include/widgets/ui_common.h:45
msgid "-- leave unchanged --"
msgstr "-- 변경 없이 유지 --"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:248
msgid "(labels only)"
msgstr "(라벨만 해당)"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:279
msgid "H Align:"
msgstr "H 정렬:"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:289
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:299
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:313
#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:323
msgid "(fields only)"
msgstr "(필드 전용)"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:303
msgid "V Align:"
msgstr "V 정렬:"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:345
#: pagelayout_editor/dialogs/properties_frame_base.cpp:354
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:235
#: pcbnew/tools/convert_tool.cpp:103
msgid "Line width:"
msgstr "선 너비:"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:359
msgid "Line color:"
msgstr "선 색상:"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:368
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:248
msgid "Line style:"
msgstr "선 스타일:"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:384
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:265
#: eeschema/dialogs/dialog_shape_properties_base.cpp:94
#: eeschema/dialogs/dialog_text_properties_base.cpp:272
msgid "Fill color:"
msgstr "색상 채우기:"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:393
#: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:71
msgid "Junction size:"
msgstr "접합 점 크기:"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.cpp:407
msgid "Junction color:"
msgstr "접합 점 색상:"

#: eeschema/dialogs/dialog_global_edit_text_and_graphics_base.h:127
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.h:106
msgid "Edit Text and Graphic Properties"
msgstr "텍스트와 그래픽 속성 편집"

#: eeschema/dialogs/dialog_global_sym_lib_table_config.cpp:32
msgid "symbol"
msgstr "심볼"

#: eeschema/dialogs/dialog_global_sym_lib_table_config.cpp:61
#, c-format
msgid ""
"Error creating symbol library table '%s'.\n"
"%s"
msgstr ""
"심볼 라이브러리 테이블 생성 오류 ‘%s’.\n"
"%s"

#: eeschema/dialogs/dialog_global_sym_lib_table_config.cpp:75
msgid "Please select a symbol library table file."
msgstr "심볼 라이브러리 테이블 파일을 선택하십시오."

#: eeschema/dialogs/dialog_global_sym_lib_table_config.cpp:84
#: pcbnew/dialogs/dialog_global_fp_lib_table_config.cpp:83
#: pcbnew/footprint_libraries_utils.cpp:140
#, c-format
msgid "File '%s' not found."
msgstr "'%s' 파일을 찾을 수 없습니다."

#: eeschema/dialogs/dialog_global_sym_lib_table_config.cpp:97
#, c-format
msgid ""
"Error reading symbol library table '%s'.\n"
"%s"
msgstr ""
"심볼 라이브러리 테이블 읽기 오류 %s.\n"
"%s"

#: eeschema/dialogs/dialog_global_sym_lib_table_config.cpp:109
#, c-format
msgid "Cannot create global library table '%s'."
msgstr "전역 라이브러리 테이블 '%s'을 생성할 수 없습니다."

#: eeschema/dialogs/dialog_global_sym_lib_table_config.cpp:117
#, c-format
msgid "Error copying global symbol library table '%s' to '%s'."
msgstr "전역 심볼 라이브러리 테이블 '%s'을(를) '%s'에 복사할 수 없음."

#: eeschema/dialogs/dialog_ibis_parser_reporter.cpp:31
msgid "Ibis parser log"
msgstr "Ibis 파서 로그"

#: eeschema/dialogs/dialog_ibis_parser_reporter_base.h:46
msgid "Ibis parser"
msgstr "Ibis 파서"

#: eeschema/dialogs/dialog_image_properties.cpp:75
#: eeschema/dialogs/dialog_image_properties_base.h:56
#: pcbnew/pcb_reference_image.cpp:350
msgid "Image Properties"
msgstr "이미지 속성"

#: eeschema/dialogs/dialog_image_properties_base.cpp:25
#: gerbview/gerber_draw_item.cpp:706
#: pagelayout_editor/dialogs/properties_frame_base.cpp:240
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:106
msgid "Position"
msgstr "위치"

#: eeschema/dialogs/dialog_junction_props.cpp:113
msgid "Edit Junction"
msgstr "교차점 편집"

#: eeschema/dialogs/dialog_junction_props.cpp:113
msgid "Edit Junctions"
msgstr "교차점 편집"

#: eeschema/dialogs/dialog_junction_props_base.cpp:27
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:46
#: pcbnew/dialogs/dialog_pad_properties.cpp:1656
#: pcbnew/dialogs/dialog_pad_properties.cpp:1673
msgid "Diameter:"
msgstr "직경:"

#: eeschema/dialogs/dialog_junction_props_base.cpp:61
msgid "Set diameter to 0 to use schematic's junction dot size."
msgstr "회로도의 접합점 크기를 사용하려면 직경을 0으로 설정합니다."

#: eeschema/dialogs/dialog_junction_props_base.cpp:65
#: eeschema/dialogs/dialog_line_properties_base.cpp:83
#: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:94
msgid "Clear color to use Schematic Editor colors."
msgstr "회로도의 편집기 색상을 사용하려면 색상을 지웁니다."

#: eeschema/dialogs/dialog_junction_props_base.h:57
msgid "Junction Properties"
msgstr "접합부 속성"

#: eeschema/dialogs/dialog_label_properties.cpp:94
msgid "Pin length:"
msgstr "핀 길이:"

#: eeschema/dialogs/dialog_label_properties.cpp:99
msgid "Global Label Properties"
msgstr "전역 라벨 속성"

#: eeschema/dialogs/dialog_label_properties.cpp:100
msgid "Hierarchical Label Properties"
msgstr "계층 라벨 속성"

#: eeschema/dialogs/dialog_label_properties.cpp:101
#: eeschema/dialogs/dialog_label_properties_base.h:118
msgid "Label Properties"
msgstr "라벨 속성"

#: eeschema/dialogs/dialog_label_properties.cpp:102
msgid "Directive Label Properties"
msgstr "지시문 레이블 속성"

#: eeschema/dialogs/dialog_label_properties.cpp:103
msgid "Hierarchical Sheet Pin Properties"
msgstr "계층 시트 핀 속성"

#: eeschema/dialogs/dialog_label_properties.cpp:458
msgid "Label can not be empty."
msgstr "레이블은 비워둘 수 없습니다."

#: eeschema/dialogs/dialog_label_properties.cpp:509
#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:368
#: eeschema/dialogs/dialog_sheet_properties.cpp:368
#: eeschema/dialogs/dialog_symbol_properties.cpp:754 include/project.h:42
msgid "untitled"
msgstr "제목 없음"

#: eeschema/dialogs/dialog_label_properties.cpp:584
msgid "Edit Label"
msgstr "라벨 편집"

#: eeschema/dialogs/dialog_label_properties.cpp:667
msgid "The first field is mandatory."
msgstr "첫 번째 필드는 필수입니다."

#: eeschema/dialogs/dialog_label_properties_base.cpp:31
#: eeschema/dialogs/dialog_label_properties_base.cpp:40
msgid "Label:"
msgstr "라벨:"

#: eeschema/dialogs/dialog_label_properties_base.cpp:33
msgid "Enter the text to be used within the schematic"
msgstr "회로도 내에서 사용할 텍스트 입력"

#: eeschema/dialogs/dialog_label_properties_base.cpp:50
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:159
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:42
#: eeschema/dialogs/dialog_text_properties_base.cpp:78
#: eeschema/dialogs/dialog_user_defined_signals_base.cpp:78
#: pcbnew/dialogs/panel_setup_rules_base.cpp:30
msgid "Syntax help"
msgstr "구문 도움말"

#: eeschema/dialogs/dialog_label_properties_base.cpp:51
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:160
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:43
#: eeschema/dialogs/dialog_text_properties_base.cpp:79
#: eeschema/dialogs/dialog_user_defined_signals_base.cpp:79
#: pcbnew/dialogs/panel_setup_rules_base.cpp:31
msgid "Show syntax help window"
msgstr "문법 도움말 창 표시"

#: eeschema/dialogs/dialog_label_properties_base.cpp:59
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:31
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:33
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:28
#: eeschema/sch_symbol.cpp:2709
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:28
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:28
#: pcbnew/footprint.cpp:3492
msgid "Fields"
msgstr "필드"

#: eeschema/dialogs/dialog_label_properties_base.cpp:89
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:61
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:62
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:189
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:58
#: eeschema/fields_grid_table.cpp:345
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:54
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:54
#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:56
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:49
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:99
#: pcbnew/dialogs/panel_fp_properties_3d_model_base.cpp:36
#: pcbnew/fp_text_grid_table.cpp:139
msgid "Show"
msgstr "표시"

#: eeschema/dialogs/dialog_label_properties_base.cpp:90
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:62
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:59
#: eeschema/fields_grid_table.cpp:346
msgid "Show Name"
msgstr "이름 표시"

#: eeschema/dialogs/dialog_label_properties_base.cpp:91
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:63
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:63
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:60
#: eeschema/fields_grid_table.cpp:347
msgid "H Align"
msgstr "H 정렬"

#: eeschema/dialogs/dialog_label_properties_base.cpp:92
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:64
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:64
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:61
#: eeschema/fields_grid_table.cpp:348
msgid "V Align"
msgstr "V 정렬"

#: eeschema/dialogs/dialog_label_properties_base.cpp:95
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:67
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:67
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:64
#: eeschema/fields_grid_table.cpp:351 eeschema/lib_field.cpp:554
#: eeschema/lib_text.cpp:421 eeschema/lib_textbox.cpp:492
#: eeschema/sch_field.cpp:918 eeschema/sch_label.cpp:1206
#: eeschema/sch_text.cpp:415 eeschema/sch_text.cpp:499
#: eeschema/sch_textbox.cpp:456 eeschema/sch_textbox.cpp:521
#: pcbnew/tools/board_inspection_tool.cpp:1338
msgid "Text Size"
msgstr "텍스트 크기"

#: eeschema/dialogs/dialog_label_properties_base.cpp:97
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:128
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:96
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:69
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:69
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:66
#: eeschema/fields_grid_table.cpp:353
msgid "X Position"
msgstr "X 위치"

#: eeschema/dialogs/dialog_label_properties_base.cpp:98
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:129
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:97
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:70
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:70
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:67
#: eeschema/fields_grid_table.cpp:354
msgid "Y Position"
msgstr "Y 위치"

#: eeschema/dialogs/dialog_label_properties_base.cpp:121
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:92
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:93
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:90
#: eeschema/dialogs/dialog_user_defined_signals_base.cpp:63
msgid "Add field"
msgstr "필드 추가"

#: eeschema/dialogs/dialog_label_properties_base.cpp:139
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:110
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:111
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:108
#: eeschema/dialogs/dialog_user_defined_signals_base.cpp:71
msgid "Delete field"
msgstr "필드 삭제"

#: eeschema/dialogs/dialog_label_properties_base.cpp:154
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:55
#: eeschema/lib_pin.cpp:1623 eeschema/pin_type.cpp:52 eeschema/pin_type.cpp:211
#: eeschema/sch_label.cpp:146 eeschema/sch_label.cpp:2079
msgid "Input"
msgstr "입력"

#: eeschema/dialogs/dialog_label_properties_base.cpp:157
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:58
#: eeschema/lib_pin.cpp:1624 eeschema/pin_type.cpp:53 eeschema/pin_type.cpp:212
#: eeschema/sch_label.cpp:147 eeschema/sch_label.cpp:2080
msgid "Output"
msgstr "출력"

#: eeschema/dialogs/dialog_label_properties_base.cpp:160
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:61
#: eeschema/lib_pin.cpp:1625 eeschema/pin_type.cpp:54 eeschema/pin_type.cpp:213
#: eeschema/sch_label.cpp:148 eeschema/sch_label.cpp:2081
msgid "Bidirectional"
msgstr "양방향"

#: eeschema/dialogs/dialog_label_properties_base.cpp:163
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:64
#: eeschema/lib_pin.cpp:1626 eeschema/pin_type.cpp:55 eeschema/pin_type.cpp:214
#: eeschema/sch_label.cpp:2082
msgid "Tri-state"
msgstr "3-상태"

#: eeschema/dialogs/dialog_label_properties_base.cpp:166
#: eeschema/dialogs/dialog_sheet_pin_properties_base.cpp:67
#: eeschema/lib_pin.cpp:1627 eeschema/pin_type.cpp:56 eeschema/pin_type.cpp:215
#: eeschema/sch_label.cpp:150 eeschema/sch_label.cpp:2083
msgid "Passive"
msgstr "수동"

#: eeschema/dialogs/dialog_label_properties_base.cpp:169
#: eeschema/sch_label.cpp:2134
msgid "Dot"
msgstr "점"

#: eeschema/dialogs/dialog_label_properties_base.cpp:175
#: eeschema/sch_label.cpp:2136
msgid "Diamond"
msgstr "다이아몬드"

#: eeschema/dialogs/dialog_label_properties_base.cpp:235
#: eeschema/dialogs/dialog_sim_format_value_base.cpp:36
#: eeschema/dialogs/panel_setup_formatting_base.cpp:300
#: eeschema/dialogs/panel_setup_formatting_base.cpp:319
#: pcbnew/dialogs/dialog_plot_base.cpp:124
msgid "Auto"
msgstr "자동"

#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:44
#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:45
msgid "ALL"
msgstr "모두"

#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:46 eeschema/lib_item.cpp:62
#: eeschema/symbol_editor/symbol_editor.cpp:1283
msgid "Standard"
msgstr "표준"

#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:119
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:87
#: pagelayout_editor/dialogs/dialog_design_inspector_base.cpp:37
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:227
msgid "Count"
msgstr "개수"

#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:120
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:88
#: eeschema/dialogs/dialog_symbol_properties.cpp:151 eeschema/lib_pin.cpp:1192
#: eeschema/sch_pin.cpp:257
msgid "Number"
msgstr "핀 번호"

#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:122
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:90
#: eeschema/dialogs/dialog_pin_properties.cpp:54
#: eeschema/dialogs/dialog_pin_properties_base.cpp:213
#: eeschema/dialogs/dialog_symbol_properties.cpp:154
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:282
#: eeschema/lib_pin.cpp:1673
msgid "Electrical Type"
msgstr "전기 유형"

#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:123
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:91
#: eeschema/dialogs/dialog_pin_properties.cpp:55
#: eeschema/dialogs/dialog_pin_properties_base.cpp:214
#: eeschema/dialogs/dialog_symbol_properties.cpp:155
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:283
#: eeschema/lib_pin.cpp:1677
msgid "Graphic Style"
msgstr "그래픽 스타일"

#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:125
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:93
#: eeschema/lib_pin.cpp:1697
msgid "Number Text Size"
msgstr "숫자 텍스트 크기"

#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:126
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:94
#: eeschema/lib_pin.cpp:1693
msgid "Name Text Size"
msgstr "이름 텍스트 크기"

#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:132
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:100
msgid "De Morgan"
msgstr "드모르간"

#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:837
#: eeschema/dialogs/dialog_lib_shape_properties.cpp:76
#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:98
#: eeschema/dialogs/dialog_lib_text_properties.cpp:108
msgid "Read Only"
msgstr "읽기 전용"

#: eeschema/dialogs/dialog_lib_edit_pin_table.cpp:1217
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1316
msgid "Save changes?"
msgstr "변경 내용을 저장 할까요?"

#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:26
msgid "Pin numbers:"
msgstr "핀 번호:"

#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:30
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:41
#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:52
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:153
#: pcbnew/dialogs/dialog_create_array_base.cpp:111
#: pcbnew/dialogs/dialog_create_array_base.cpp:124
#: pcbnew/dialogs/dialog_create_array_base.cpp:341
#: pcbnew/dialogs/dialog_create_array_base.cpp:352
#: pcbnew/dialogs/dialog_create_array_base.cpp:391
#: pcbnew/dialogs/dialog_create_array_base.cpp:430
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
#: pcbnew/dialogs/dialog_export_idf_base.cpp:64
#: pcbnew/dialogs/dialog_export_idf_base.cpp:85
#: pcbnew/dialogs/dialog_export_step_base.cpp:82
#: pcbnew/dialogs/dialog_export_step_base.cpp:97
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:77
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:92
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:141
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:142
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:253
#: pcbnew/dialogs/dialog_gendrill_base.cpp:155
#: pcbnew/dialogs/dialog_gendrill_base.cpp:163
#: pcbnew/dialogs/dialog_gendrill_base.cpp:171
#: pcbnew/dialogs/dialog_gendrill_base.cpp:179
#: pcbnew/dialogs/dialog_gendrill_base.cpp:187
#: pcbnew/dialogs/dialog_move_exact_base.cpp:28
#: pcbnew/dialogs/dialog_move_exact_base.cpp:42
#: pcbnew/dialogs/dialog_move_exact_base.cpp:56
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:337
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:338
#: pcbnew/dialogs/dialog_position_relative_base.cpp:70
#: pcbnew/dialogs/dialog_position_relative_base.cpp:87
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:136
#: pcbnew/pcb_dimension.cpp:1404
msgid "0"
msgstr "0"

#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:37
msgid "Pin count:"
msgstr "핀 수:"

#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:48
msgid "Duplicate pins:"
msgstr "중복 핀:"

#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:137
msgid "Group by name"
msgstr "이름으로 그룹화"

#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:140
msgid "Group Selected"
msgstr "그룹 선택됨"

#: eeschema/dialogs/dialog_lib_edit_pin_table_base.cpp:151
msgid "Filter by unit:"
msgstr "유닛 필터링:"

#: eeschema/dialogs/dialog_lib_edit_pin_table_base.h:83
msgid "Pin Table"
msgstr "핀 테이블"

#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:42
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:130
msgid "Symbol name:"
msgstr "심볼 이름:"

#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:44
msgid ""
"The symbol name in library and also the default\n"
"symbol value when loaded in the schematic."
msgstr ""
"이것은 라이브러리에 포함된 심볼 이름이며, 회로도에 불러올 경우\n"
"기본 심볼 값으로도 적용됩니다."

#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:51
msgid "Derive from existing symbol:"
msgstr "기존 심볼에서 파생:"

#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:55
#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:92
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:251
#: eeschema/dialogs/dialog_line_properties_base.cpp:66
#: eeschema/dialogs/dialog_shape_properties_base.cpp:83
#: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:66
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:169
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:252
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:209
msgid "Combo!"
msgstr "콤보!"

#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:56
msgid ""
"Select symbol in the current library as parent symbol.\n"
"\n"
"This was previously known as an alias.  Do not select\n"
"an existing symbol to create a new root symbol."
msgstr ""
"현재 라이브러리의 심볼을 상위 심볼로 선택합니다.\n"
"\n"
"이것은 이전에 별칭으로 알려져 있었습니다.  새 루트\n"
"심볼을 생성하기 위해 기존의 심볼을 선택하지 마십시오."

#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:60
msgid "Default reference designator:"
msgstr "기본 참조 지정자:"

#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:64
msgid "U"
msgstr "U"

#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:67
msgid "Number of units per package:"
msgstr "패키지당 유닛의 수:"

#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:80
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:182
msgid "All units are interchangeable"
msgstr "모든 유닛은 교환 가능"

#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:81
msgid ""
"Check this option when all symbol units are identical except\n"
"for pin numbers."
msgstr ""
"핀 번호를 제외한 모든 심볼 유닛이 동일할 때\n"
"이 옵션을 체크하세요."

#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:85
msgid "Create symbol with alternate body style (De Morgan)"
msgstr "대체 본문 스타일을 사용하여 심볼 작성 (드 모르간)"

#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:88
msgid "Create symbol as power symbol"
msgstr "전원 심볼로서 심볼 생성"

#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:91
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:276
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:207
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:207
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:208
#: pcbnew/drc/drc_test_provider_library_parity.cpp:569
#: pcbnew/drc/drc_test_provider_schematic_parity.cpp:176
msgid "Exclude from bill of materials"
msgstr "BOM에서 제외"

#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:94
#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:279
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:212
msgid "Exclude from board"
msgstr "기판에서 제외"

#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:112
msgid "Pin name position offset:"
msgstr "핀 이름 위치 오프셋:"

#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:129
msgid "Show pin number text"
msgstr "핀 번호 텍스트 표시"

#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:133
msgid "Show pin name text"
msgstr "핀 이름 텍스트 표시"

#: eeschema/dialogs/dialog_lib_new_symbol_base.cpp:137
msgid "Pin name inside"
msgstr "내부 핀 이름"

#: eeschema/dialogs/dialog_lib_new_symbol_base.h:78
msgid "New Symbol"
msgstr "새 심볼"

#: eeschema/dialogs/dialog_lib_shape_properties.cpp:64
#: eeschema/dialogs/dialog_shape_properties.cpp:60
#: eeschema/dialogs/dialog_sheet_properties.cpp:80
#: eeschema/dialogs/dialog_text_properties.cpp:72
msgid "Note: individual item colors overridden in Preferences."
msgstr "참고: 개별 항목 색상은 기본 설정에서 재정의됩니다."

#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:48
#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:207
#: eeschema/dialogs/dialog_shape_properties_base.cpp:39
#: eeschema/dialogs/dialog_text_properties_base.cpp:217
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:152
#: pcbnew/pcb_textbox.cpp:684
msgid "Border"
msgstr "테두리"

#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:97
msgid "Set border width to 0 to use schematic's default symbol line width."
msgstr ""
"회로드의 기본 기호 선 너비를 사용하려면 테두리 너비를 0으로 설정합니다."

#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:111
#: pcbnew/zone.cpp:1641
msgid "Fill Style"
msgstr "채우기 스타일"

#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:118
msgid "Do not fill"
msgstr "채우지 마십시오"

#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:121
msgid "Fill with body outline color"
msgstr "바디 외곽선 색상으로 채우기"

#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:124
msgid "Fill with body background color"
msgstr "바디 배경색으로 채우기"

#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:127
msgid "Fill with:"
msgstr "채우기:"

#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:148
#: eeschema/dialogs/dialog_lib_text_properties_base.cpp:196
msgid "Private to Symbol Editor"
msgstr "심볼 편집기 전용"

#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:151
#: eeschema/dialogs/dialog_pin_properties_base.cpp:154
msgid "Common to all &units in symbol"
msgstr "심볼 내의 모든 유닛에 속성 적용 (&u)"

#: eeschema/dialogs/dialog_lib_shape_properties_base.cpp:157
#: eeschema/dialogs/dialog_pin_properties_base.cpp:157
msgid "Common to all body &styles (De Morgan)"
msgstr "심볼 내의 모든 바디 스타일에 속성 적용 (드 모르간) (&s)"

#: eeschema/dialogs/dialog_lib_shape_properties_base.h:89
#: eeschema/dialogs/dialog_shape_properties_base.h:77
#: pcbnew/dialogs/dialog_shape_properties_base.h:110
#, c-format
msgid "%s Properties"
msgstr "%s 속성"

#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:247
#: eeschema/dialogs/dialog_symbol_properties.cpp:639
msgid "References must start with a letter."
msgstr "참조는 문자로 시작해야 합니다."

#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:267
#: eeschema/dialogs/dialog_sheet_properties.cpp:215
#: eeschema/dialogs/dialog_symbol_properties.cpp:656
#: pcbnew/dialogs/dialog_footprint_properties.cpp:373
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor.cpp:421
msgid "Fields must have a name."
msgstr "필드에는 이름이 있어야 합니다."

#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:284
msgid "Derived symbol must have a parent selected"
msgstr "별칭이 지정된 심볼은 상위 항목이 선택되어야 함"

#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:296
msgid "Delete extra units from symbol?"
msgstr "심볼에서 추가 유닛을 삭제 하겠습니까?"

#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:302
msgid "Delete alternate body style (De Morgan) from symbol?"
msgstr "심볼에서 대체 바디 스타일(드모르간)을 삭제하시겠습니까?"

#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:323
#: eeschema/symbol_editor/symbol_editor.cpp:387
#: eeschema/symbol_editor/symbol_editor.cpp:692
#: eeschema/tools/symbol_editor_control.cpp:369
msgid "Symbol must have a name."
msgstr "심볼에는 이름이 있어야 합니다."

#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:335
#, c-format
msgid "Symbol name '%s' already in use in library '%s'."
msgstr "심볼 '%s'은(는) 이미 라이브러리 '%s'에서 사용 중입니다."

#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:342
#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:347
#: eeschema/dialogs/dialog_symbol_properties.cpp:860
msgid "Edit Symbol Properties"
msgstr "심볼 속성 편집"

#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:467
#, c-format
msgid "The name '%s' is already in use."
msgstr "'%s'라는 이름은 이미 사용 중입니다."

#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:550
#: eeschema/dialogs/dialog_sheet_properties.cpp:738
#: eeschema/dialogs/dialog_symbol_properties.cpp:962
#: pcbnew/dialogs/dialog_footprint_properties.cpp:637
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor.cpp:683
#, c-format
msgid "The first %d fields are mandatory."
msgstr "첫 %d 필드는 필수로 입력하여야 합니다."

#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:722
msgid "Add Footprint Filter"
msgstr "풋프린트 필터 추가"

#: eeschema/dialogs/dialog_lib_symbol_properties.cpp:765
msgid "Edit Footprint Filter"
msgstr "풋프린트 필터 편집"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:137
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:122
msgid "Keywords:"
msgstr "키워드:"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:144
msgid "Derive from symbol:"
msgstr "다음 심볼에서 파생:"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:148
msgid "<None>"
msgstr "없음"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:149
msgid ""
"Select symbol to derive this symbol from or select\n"
"<None> for root symbol.\n"
"\n"
"Derived symbols were formerly referred to as aliases.\n"
"This is no longer the case and all symbols are either\n"
"derived from another symbols or they stand alone as\n"
"root symbols."
msgstr ""
"이 심볼을 파생시킬 신호를 선택하거나, 루트 심볼에 대하여\n"
"<None>을 선택하세요.\n"
"\n"
"파생된 심볼은 이전에 에일리어스로서 참조되었습니다.\n"
"이는 더이상 유효하지 않으며, 모든 심볼은 다른 심볼로부터\n"
"파생되었거나 루트 심볼로서 독립되어\n"
"사용됩니다."

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:170
msgid "Number of units:"
msgstr "단위 개수:"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:172
msgid "Enter the number of units for a symbol that contains more than one unit"
msgstr "두 개 이상의 유닛이 포함된 심볼의 유닛 수를 입력합니다"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:183
msgid ""
"Check this option when all symbol units have the same function.\n"
"For instance, this should be checked for a quad NAND gate, while it should "
"not be checked for a dual triode (where unit C is the filament)."
msgstr ""
"모든 기호 단위의 기능이 동일한 경우 이 옵션을 선택합니다.\n"
"예를 들어, 쿼드 NAND 게이트의 경우 이를 확인해야 하지만 듀얼 triode(유닛 C는 "
"필라멘트임)의 경우에는 확인해서는 안 됩니다."

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:190
msgid "Has alternate body style (De Morgan)"
msgstr "대체 바디 스타일 (드 모르간) 존재"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:191
msgid ""
"Check this option if the symbol has an alternate body style for a De Morgan "
"logic equivalence.\n"
"For instance, this should be checked for a NAND gate to provide an alternate "
"representation as an OR gate with inverted inputs."
msgstr ""
"심볼에 De Morgan 논리 등가에 대한 대체 본문 스타일이 있는 경우 이 옵션을 선택"
"하십시오.\n"
"예를 들어 NAND 게이트가 반전된 입력이 있는 OR 게이트로 대체 표현을 제공하려"
"면 이를 확인해야 합니다."

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:198
msgid "Define as power symbol"
msgstr "전원 심볼으로 정의"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:199
msgid ""
"Setting this option makes the symbol in question appear in the\n"
"\"add power symbol\" dialog.  It will lock the value text to protect it\n"
"from editing in the schematic.  The symbol will not be included in\n"
"the BOM and cannot be assigned a footprint."
msgstr ""
"이 옵션을 설정하면 \"전원 심볼 추가\" 대화 상자에 \n"
"해당 심볼을 표시합니다. 또한 값 텍스트를 잠궈 Eeschema가\n"
"편집하지 못하도록 막아줍니다. 이 심볼은 더이상 BOM에\n"
"포함될 수 없으며, 풋프린트에 할당될 수 없습니다."

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:213
msgid "Pin Text Options"
msgstr "핀 텍스트 설정"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:215
msgid "Show pin number"
msgstr "핀 번호 표시"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:217
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:179
msgid "Show or hide pin numbers"
msgstr "핀 번호 표시 또는 숨기기"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:221
msgid "Show pin name"
msgstr "핀 이름 표시"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:223
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:185
msgid "Show or hide pin names"
msgstr "핀 이름 표시 또는 숨기기"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:230
msgid "Place pin names inside"
msgstr "내부에 핀 이름 배치"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:232
msgid ""
"Check this option to have pin names inside the body and pin number outside.\n"
"If not checked pins names and pins numbers are outside."
msgstr ""
"핀 이름을 바디 안쪽에 표시하고, 핀 번호를 바깥에 표시하고자 할 때 이 옵션을 "
"체크하세요.\n"
"체크하지 않으면, 핀 이름과 번호는 둘 다 바깥에 표시됩니다."

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:239
msgid "Position offset:"
msgstr "위치 옵셋 :"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:241
msgid "Margin between the pin name position and the symbol body."
msgstr "핀 이름의 위치와 심볼 본체 사이의 여백."

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:248
#: eeschema/dialogs/dialog_pin_properties_base.cpp:120
#: eeschema/dialogs/dialog_pin_properties_base.cpp:124
#: eeschema/dialogs/dialog_pin_properties_base.cpp:128
#: eeschema/dialogs/dialog_pin_properties_base.cpp:132
#: eeschema/dialogs/dialog_pin_properties_base.cpp:136
#: eeschema/dialogs/dialog_sheet_properties_base.cpp:137
#: eeschema/dialogs/dialog_sim_command_base.cpp:711
#: eeschema/dialogs/dialog_sim_command_base.cpp:750
#: eeschema/dialogs/dialog_sim_command_base.cpp:787
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:72
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:83
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:104
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:156
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:167
#: pcbnew/microwave/microwave_polygon.cpp:146
#: pcbnew/microwave/microwave_polygon.cpp:155
msgid "units"
msgstr "단위"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:270
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:201
#: eeschema/dialogs/dialog_text_properties_base.cpp:86
msgid "Exclude from simulation"
msgstr "시뮬레이션에서 제외"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:303
msgid "Footprint filters:"
msgstr "풋프린트 필터:"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:305
msgid ""
"A list of footprints names that can be used for this symbol.\n"
"Footprints names can used wildcards like sm* to allow all footprints names "
"starting by sm."
msgstr ""
"이 심볼에 대하여 사용가능한 풋프린트 이름 목록입니다.\n"
"풋프린트 이름은 sm*과 같이 와일드카드를 사용할 수 있으며, 이는 sm으로 시작하"
"는 모든 풋프린트를 허용하게 합니다."

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:316
msgid "Add footprint filter"
msgstr "풋프린트 필터 추가"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:321
msgid "Edit footprint filter"
msgstr "풋프린트 필터 편집"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:329
msgid "Delete footprint filter"
msgstr "풋프린트 필터 삭제"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:343
msgid "Footprint Filters"
msgstr "풋프린트 필터"

#: eeschema/dialogs/dialog_lib_symbol_properties_base.cpp:356
msgid "Edit Simulation Model..."
msgstr "시뮬레이션 모델 편집..."

#: eeschema/dialogs/dialog_lib_symbol_properties_base.h:116
msgid "Library Symbol Properties"
msgstr "라이브러리 심볼 속성"

#: eeschema/dialogs/dialog_lib_text_properties.cpp:231
#: eeschema/dialogs/dialog_text_properties.cpp:447
msgid "Text can not be empty."
msgstr "텍스트는 비워둘 수 없습니다."

#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:259
#: eeschema/dialogs/dialog_text_properties_base.cpp:266
msgid "Background fill"
msgstr "배경 채우기"

#: eeschema/dialogs/dialog_lib_textbox_properties_base.cpp:285
msgid "Private to symbol editor"
msgstr "심볼 편집기 전용"

#: eeschema/dialogs/dialog_lib_textbox_properties_base.h:106
#: eeschema/dialogs/dialog_text_properties.cpp:57
#: pcbnew/dialogs/dialog_textbox_properties_base.h:101
msgid "Text Box Properties"
msgstr "텍스트 상자 속성"

#: eeschema/dialogs/dialog_line_properties.cpp:152
msgid "Edit Line"
msgstr "선 편집"

#: eeschema/dialogs/dialog_line_properties.cpp:152
msgid "Edit Lines"
msgstr "선 편집"

#: eeschema/dialogs/dialog_line_properties_base.cpp:79
msgid "Set width to 0 to use schematic's default line width."
msgstr "도식의 기본 선 너비로 사용하기 위해 너비를 0으로 설정합니다."

#: eeschema/dialogs/dialog_line_properties_base.h:66
msgid "Line Properties"
msgstr "선 속성"

#: eeschema/dialogs/dialog_migrate_buses.cpp:114
msgid "Conflicting Labels"
msgstr "충돌하는 라벨"

#: eeschema/dialogs/dialog_migrate_buses.cpp:115
msgid "New Label"
msgstr "새로운 라벨"

#: eeschema/dialogs/dialog_migrate_buses.cpp:224
msgid "Updated"
msgstr "업데이트됨"

#: eeschema/dialogs/dialog_migrate_buses_base.cpp:19
msgid ""
"This schematic has one or more buses with more than one label.\n"
"This was allowed in previous KiCad versions but is no longer permitted."
msgstr ""
"이 회로도는 하나 이상의 라벨을 가진 버스를 1개 이상 포함하고 있습니다.\n"
"이전 버전의 KiCad에서는 이것이 허용되었지만, 지금은 더이상 불가능합니다."

#: eeschema/dialogs/dialog_migrate_buses_base.cpp:23
msgid ""
"Please select a new name for each of the buses below.\n"
"A name has been suggested for you based on the labels attached to the bus."
msgstr ""
"아래의 각 버스에 대하여 새로운 이름을 선택하세요.\n"
"이름은 버스에 붙은 라벨을 토대로 제안되었습니다."

#: eeschema/dialogs/dialog_migrate_buses_base.cpp:32
msgid "Proposed new name:"
msgstr "제안된 새 이름:"

#: eeschema/dialogs/dialog_migrate_buses_base.cpp:45
msgid "Accept Name"
msgstr "이름 사용"

#: eeschema/dialogs/dialog_migrate_buses_base.h:53
msgid "Migrate Buses"
msgstr "버스 이주"

#: eeschema/dialogs/dialog_pin_properties.cpp:53
#: eeschema/dialogs/dialog_pin_properties_base.cpp:212
msgid "Alternate Pin Name"
msgstr "대체 핀 이름"

#: eeschema/dialogs/dialog_pin_properties.cpp:204
#: eeschema/dialogs/dialog_symbol_properties.cpp:357
msgid "Alternate pin assignments are not available for De Morgan symbols."
msgstr "드 모르간 기호에는 대체 핀 할당을 사용할 수 없습니다."

#: eeschema/dialogs/dialog_pin_properties.cpp:281
msgid "Exit sync pins mode"
msgstr "핀 동기화 모드 나가기"

#: eeschema/dialogs/dialog_pin_properties.cpp:296
msgid ""
"Synchronized pins mode is enabled.\n"
"Similar pins will be edited regardless of this option."
msgstr ""
"동기화 핀 편집 모드가 활성화되었습니다.\n"
"이 옵션과 상관없이, 비슷한 핀들은 편집됩니다."

#: eeschema/dialogs/dialog_pin_properties.cpp:301
msgid "If checked, this pin will exist in all units."
msgstr "체크할 경우, 이 핀은 모든 유닛에 대해 존재하게 됩니다."

#: eeschema/dialogs/dialog_pin_properties.cpp:305
msgid "This symbol only has one unit. This control has no effect."
msgstr ""
"이 심볼은 단 하나의 유닛만을 갖고 있습니다. 이 조작은 아무런 영향도 주지 않습"
"니다."

#: eeschema/dialogs/dialog_pin_properties.cpp:326
msgid "Alternate pin definitions must have a name."
msgstr "대체 핀 정의에는 이름이 있어야 합니다."

#: eeschema/dialogs/dialog_pin_properties.cpp:346
#, c-format
msgid ""
"This pin is not on a %d mils grid which will make it difficult to connect to "
"in the schematic.\n"
"Do you wish to continue?"
msgstr ""
"이 핀은 %d mils 그리드에 있지 않으므로 회로도에서 연결하기가 어렵습니다.\n"
"계속하시겠습니까?"

#: eeschema/dialogs/dialog_pin_properties.cpp:440
msgid "Synchronized Pins Mode."
msgstr "동기화된 핀 편집 모드."

#: eeschema/dialogs/dialog_pin_properties.cpp:442
msgid "Synchronized Pins Mode.  New pin will be added to all units."
msgstr "동기화 된 핀 모드.  모든 장치에 새로운 핀이 추가됩니다."

#: eeschema/dialogs/dialog_pin_properties.cpp:444
msgid "Synchronized Pins Mode.  Matching pins in other units will be updated."
msgstr "동기화된 핀 모드. 다른 장치의 일치하는 핀이 업데이트됩니다."

#: eeschema/dialogs/dialog_pin_properties_base.cpp:44
msgid "Pin &name:"
msgstr "핀 이름 (&n):"

#: eeschema/dialogs/dialog_pin_properties_base.cpp:51
msgid "Pin num&ber:"
msgstr "핀 번호 (&b):"

#: eeschema/dialogs/dialog_pin_properties_base.cpp:53
msgid "Pin number: 1 to 4 ASCII letters and/or digits"
msgstr "핀 번호: 1 ~ 4개의 ASCII 문자 또는 숫자"

#: eeschema/dialogs/dialog_pin_properties_base.cpp:60
msgid "&X position:"
msgstr "&X 위치:"

#: eeschema/dialogs/dialog_pin_properties_base.cpp:69
msgid "&Y position:"
msgstr "&Y 위치:"

#: eeschema/dialogs/dialog_pin_properties_base.cpp:76
msgid "&Pin length:"
msgstr "핀 길이 (&P):"

#: eeschema/dialogs/dialog_pin_properties_base.cpp:83
msgid "N&ame text size:"
msgstr "이름 텍스트 크기 (&a):"

#: eeschema/dialogs/dialog_pin_properties_base.cpp:90
msgid "Number text si&ze:"
msgstr "숫자 텍스트 크기 (&z):"

#: eeschema/dialogs/dialog_pin_properties_base.cpp:97
msgid "Electrical type:"
msgstr "전기 유형:"

#: eeschema/dialogs/dialog_pin_properties_base.cpp:99
msgid "Used by the ERC."
msgstr "ERC에 사용됩니다."

#: eeschema/dialogs/dialog_pin_properties_base.cpp:106
msgid "Graphic style:"
msgstr "그래픽 스타일:"

#: eeschema/dialogs/dialog_pin_properties_base.cpp:163
msgid "&Visible"
msgstr "가시성 (&V)"

#: eeschema/dialogs/dialog_pin_properties_base.cpp:170
#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:291
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:192
msgid "Preview:"
msgstr "미리보기:"

#: eeschema/dialogs/dialog_pin_properties_base.cpp:188
msgid "Alternate pin function definitions"
msgstr "대체 핀 기능 정의"

#: eeschema/dialogs/dialog_pin_properties_base.h:104
msgid "Pin Properties"
msgstr "핀 속성"

#: eeschema/dialogs/dialog_plot_schematic.cpp:74
msgid "Plot All Pages"
msgstr "모든 페이지 플롯"

#: eeschema/dialogs/dialog_plot_schematic.cpp:75
msgid "Plot Current Page"
msgstr "현재 페이지 플롯"

#: eeschema/dialogs/dialog_plot_schematic.cpp:180
#: pcbnew/dialogs/dialog_export_svg.cpp:239
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:208
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:559
#: pcbnew/dialogs/dialog_gendrill.cpp:301 pcbnew/dialogs/dialog_plot.cpp:639
msgid "Select Output Directory"
msgstr "출력 경로 지정"

#: eeschema/dialogs/dialog_plot_schematic.cpp:197
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1210
#: pcbnew/dialogs/dialog_gendrill.cpp:310 pcbnew/dialogs/dialog_plot.cpp:656
#, c-format
msgid ""
"Do you want to use a path relative to\n"
"'%s'?"
msgstr ""
"상대 경로를 사용하시겠습니까\n"
"'%s'?"

#: eeschema/dialogs/dialog_plot_schematic.cpp:199
#: pcbnew/dialogs/dialog_export_svg.cpp:246
#: pcbnew/dialogs/dialog_export_svg.cpp:258
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:215
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:226
#: pcbnew/dialogs/dialog_gendrill.cpp:312
#: pcbnew/dialogs/dialog_gendrill.cpp:321 pcbnew/dialogs/dialog_plot.cpp:658
msgid "Plot Output Directory"
msgstr "출력 경로 플롯"

#: eeschema/dialogs/dialog_plot_schematic.cpp:242
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:61
msgid "Schematic size"
msgstr "회로도 크기"

#: eeschema/dialogs/dialog_plot_schematic.cpp:248
#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:80
msgid "A5"
msgstr "A5"

#: eeschema/dialogs/dialog_plot_schematic.cpp:249
#: eeschema/dialogs/dialog_plot_schematic.cpp:264
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:61
msgid "A4"
msgstr "A4"

#: eeschema/dialogs/dialog_plot_schematic.cpp:250
msgid "A3"
msgstr "A3"

#: eeschema/dialogs/dialog_plot_schematic.cpp:251
msgid "A2"
msgstr "A2"

#: eeschema/dialogs/dialog_plot_schematic.cpp:252
msgid "A1"
msgstr "A1"

#: eeschema/dialogs/dialog_plot_schematic.cpp:253
msgid "A0"
msgstr "A0"

#: eeschema/dialogs/dialog_plot_schematic.cpp:254
#: eeschema/dialogs/dialog_plot_schematic.cpp:265
#: eeschema/dialogs/dialog_plot_schematic_base.cpp:61
#: eeschema/dialogs/panel_setup_formatting_base.cpp:34
#: eeschema/dialogs/panel_setup_formatting_base.cpp:319
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:145
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:197
#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:99
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:38
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:120
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:286
msgid "A"
msgstr "A"

#: eeschema/dialogs/dialog_plot_schematic.cpp:255
#: pcbnew/dialogs/dialog_export_2581_base.cpp:76
msgid "B"
msgstr "B"

#: eeschema/dialogs/dialog_plot_schematic.cpp:256
#: pcbnew/dialogs/dialog_export_2581_base.cpp:76
msgid "C"
msgstr "C"

#: eeschema/dialogs/dialog_plot_schematic.cpp:257
msgid "D"
msgstr "D"

#: eeschema/dialogs/dialog_plot_schematic.cpp:258
msgid "E"
msgstr "E"

#: eeschema/dialogs/dialog_plot_schematic.cpp:419
#, c-format
msgid "Falling back to user path '%s'."
msgstr "사용자 경로 '%s'(으)로 대체합니다."

#: eeschema/dialogs/dialog_plot_schematic.cpp:448
#: eeschema/dialogs/dialog_plot_schematic.cpp:486
#, c-format
msgid "Cannot normalize path '%s%s'."
msgstr "'%s%s' 경로를 정상화할 수 없음."

#: eeschema/dialogs/dialog_plot_schematic.cpp:473
msgid "No project or path defined for the current schematic."
msgstr "현재 회로도에 대해 정의된 프로젝트 또는 경로가 없습니다."

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:25
#: pcbnew/dialogs/dialog_export_svg_base.cpp:25
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:27
#: pcbnew/dialogs/dialog_plot_base.cpp:37
msgid "Output directory:"
msgstr "출력 디렉토리:"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:30
msgid ""
"Target directory for plot files. Can be absolute or relative to the "
"schematic main file location."
msgstr ""
"플롯 파일에 대한 목표 디렉토리입니다. 절대경로이거나, 회로도의 메인 파일 위치"
"에 대한 상대 경로일 수 있습니다."

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:42
#: pcbnew/dialogs/dialog_plot_base.cpp:28
msgid "Postscript"
msgstr "PostScript"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:42
#: pcbnew/dialogs/dialog_gendrill_base.cpp:84
#: pcbnew/dialogs/dialog_plot_base.cpp:28
msgid "PDF"
msgstr "PDF"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:42
#: pcbnew/dialogs/dialog_gendrill_base.cpp:84
#: pcbnew/dialogs/dialog_plot_base.cpp:28
msgid "SVG"
msgstr "SVG"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:42
#: pcbnew/dialogs/dialog_gendrill_base.cpp:84
#: pcbnew/dialogs/dialog_plot_base.cpp:28
msgid "DXF"
msgstr "DXF"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:42
#: pcbnew/dialogs/dialog_plot_base.cpp:28
msgid "HPGL"
msgstr "HPGL"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:57
msgid "Page size:"
msgstr "페이지 크기:"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:67
#: pcbnew/dialogs/dialog_plot_base.cpp:75
msgid "Plot drawing sheet"
msgstr "도면 시트 플롯"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:69
msgid "Plot the drawing sheet border and title block"
msgstr "도면 시트의 테두리와 제목 블록을 플롯"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:78
#: eeschema/printing/dialog_print_using_printer_base.cpp:35
msgid "Black and White"
msgstr "흑백"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:84
#: pagelayout_editor/dialogs/panel_pl_editor_color_settings_base.cpp:20
#: pcbnew/dialogs/dialog_export_svg_base.cpp:96
msgid "Color theme:"
msgstr "색상 테마:"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:91
msgid "Select the color theme to use for plotting"
msgstr "플로팅에 사용할 색상 테마를 선택하세요"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:95
msgid "Plot background color"
msgstr "배경색을 플롯"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:96
msgid "Plot the background color if the output format supports it"
msgstr "출력 포맷이 지원한다면, 배경색을 플롯합니다"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:100
msgid "Minimum line width:"
msgstr "최소 선 너비:"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:105
msgid ""
"Selection of the default pen thickness used to draw items, when their "
"thickness is set to 0."
msgstr ""
"만일 굵기가 0으로 설정되어 있을 경우, 개체를 그릴 기본 펜 굵기를 선택합니다."

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:124
#: pcbnew/dialogs/dialog_plot_base.cpp:250
msgid "HPGL Options"
msgstr "HPGL 옵션"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:131
msgid "Position and units:"
msgstr "위치 및 단위:"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:135
msgid "Bottom left, plotter units"
msgstr "왼쪽 아래, 플로터 유닛"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:135
msgid "Centered, plotter units"
msgstr "중앙, 플로터 유닛"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:135
msgid "Page fit, user units"
msgstr "페이지에 맞춤, 사용자 유닛"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:135
msgid "Content fit, user units"
msgstr "내용물에 맞춤, 사용자 유닛"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:141
msgid "Pen width:"
msgstr "펜 굵기:"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:161
#: pcbnew/dialogs/dialog_plot_base.cpp:393
msgid "PDF Options"
msgstr "PDF 옵션"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:163
msgid "Generate property popups"
msgstr "속성 팝업 생성"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:170
msgid "Other options"
msgstr "다른 옵션"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:172
msgid "Open file after plot"
msgstr "플롯 후 파일 열기"

#: eeschema/dialogs/dialog_plot_schematic_base.cpp:173
msgid "Open output file with associated application after successful plot"
msgstr "플롯 성공 후 관련 응용 프로그램과 함께 출력 파일 열기"

#: eeschema/dialogs/dialog_plot_schematic_base.h:90
msgid "Plot Schematic Options"
msgstr "플롯 회로도 옵션"

#: eeschema/dialogs/dialog_rescue_each.cpp:102
msgid ""
"This schematic was made using older symbol libraries which may break the "
"schematic.  Some symbols may need to be linked to a different symbol name.  "
"Some symbols may need to be \"rescued\" (copied and renamed) into a new "
"library.\n"
"\n"
"The following changes are recommended to update the project."
msgstr ""
"이 회로도는 오래된 심볼 라이브러리로 제작되었으며, 회로도를 손상시킬 수 있습"
"니다.  몇몇 심볼들은 다른 심볼 이름에 연결될 필요가 있습니다.  몇몇 심볼들은 "
"새로운 라이브러리로 \"복구하는\" (복사하여 새로운 이름 붙이기) 작업이 필요합"
"니다.\n"
"\n"
"프로젝트를 업데이트하기 위하여 다음과 같은 변경점이 권장됩니다."

#: eeschema/dialogs/dialog_rescue_each.cpp:109
msgid "Accept"
msgstr "확인"

#: eeschema/dialogs/dialog_rescue_each.cpp:123
msgid "Symbol Name"
msgstr "심볼 이름"

#: eeschema/dialogs/dialog_rescue_each.cpp:127
msgid "Action Taken"
msgstr "취한 액션"

#: eeschema/dialogs/dialog_rescue_each.cpp:151
#: eeschema/dialogs/dialog_rescue_each.cpp:301
msgid "Rescue Symbols"
msgstr "심볼 복구"

#: eeschema/dialogs/dialog_rescue_each.cpp:152
msgid "Skip Symbol Rescue"
msgstr "심볼 구조 건너뛰기"

#: eeschema/dialogs/dialog_rescue_each.cpp:234
#, c-format
msgid "Instances of this symbol (%d items):"
msgstr "이 심볼의 인스턴스 (%d 개의 항목):"

#: eeschema/dialogs/dialog_rescue_each.cpp:297
msgid ""
"Stop showing this tool?\n"
"No changes will be made.\n"
"\n"
"This setting can be changed from the \"Preferences\" dialog,\n"
"and the tool can be activated manually from the \"Tools\" menu."
msgstr ""
"이 도구 표시를 중지하시겠습니까?\n"
"변경사항은 없습니다.\n"
"\n"
"이 설정은 \"기본 설정\" 대화 상자에서 변경할 수 있습니다.\n"
"도구는 \"도구\" 메뉴에서 수동으로 활성화할 수 있습니다."

#: eeschema/dialogs/dialog_rescue_each_base.cpp:28
msgid "Symbols to update:"
msgstr "업데이트할 심볼:"

#: eeschema/dialogs/dialog_rescue_each_base.cpp:38
msgid "Instances of this symbol:"
msgstr "이 심볼의 인스턴스:"

#: eeschema/dialogs/dialog_rescue_each_base.cpp:57
msgid "Cached Symbol:"
msgstr "캐시된 심볼:"

#: eeschema/dialogs/dialog_rescue_each_base.cpp:78
msgid "Library Symbol:"
msgstr "라이브러리 심볼:"

#: eeschema/dialogs/dialog_rescue_each_base.cpp:102
msgid "Never Show Again"
msgstr "다시 표시하지 않음"

#: eeschema/dialogs/dialog_rescue_each_base.h:67
#: eeschema/project_rescue.cpp:598 eeschema/project_rescue.cpp:613
msgid "Project Rescue Helper"
msgstr "프로젝트 복구 도우미"

#: eeschema/dialogs/dialog_sch_import_settings.cpp:44
#: eeschema/dialogs/dialog_sch_import_settings_base.h:65
#: pcbnew/dialogs/dialog_import_settings.cpp:53
#: pcbnew/dialogs/dialog_import_settings_base.h:70
msgid "Import Settings"
msgstr "설정 가져오기"

#: eeschema/dialogs/dialog_sch_import_settings.cpp:60
#: pcbnew/dialogs/dialog_import_settings.cpp:115
msgid "Import Settings From"
msgstr "다음 경로에서 설정 가져오기"

#: eeschema/dialogs/dialog_sch_import_settings.cpp:73
#: pcbnew/dialogs/dialog_import_settings.cpp:128
msgid "File not found."
msgstr "파일을 찾을 수 없습니다."

#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:24
#: pcbnew/dialogs/dialog_import_settings_base.cpp:24
msgid "Import from:"
msgstr "이곳에서 가져오기:"

#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:29
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:32
#: pcbnew/dialogs/dialog_import_settings_base.cpp:29
#: pcbnew/dialogs/dialog_plot_base.cpp:42
msgid ""
"Target directory for plot files. Can be absolute or relative to the board "
"file location."
msgstr ""
"플롯 파일의 대상 디렉토리입니다. 절대 경로이거나, 기판 파일 위치에 대한 상대 "
"경로일 수 있습니다."

#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:44
#: pcbnew/dialogs/dialog_import_settings_base.cpp:47
msgid "Import:"
msgstr "가져오기:"

#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:48
msgid "Formatting preferences"
msgstr "서식 설정"

#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:51
msgid "Field name templates"
msgstr "필드 이름 템플릿"

#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:54
msgid "Pin conflict map"
msgstr "핀 충돌 표시"

#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:57
#: pcbnew/dialogs/dialog_import_settings_base.cpp:81
msgid "Violation severities"
msgstr "위반 심각도"

#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:60
#: pcbnew/dialogs/dialog_import_settings_base.cpp:75
msgid "Net classes"
msgstr "네트 클래스"

#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:63
#: eeschema/dialogs/dialog_schematic_setup.cpp:76
msgid "BOM Presets"
msgstr "BOM 사전 설정"

#: eeschema/dialogs/dialog_sch_import_settings_base.cpp:66
msgid "BOM Format Presets"
msgstr "BOM 형식 사전 설정"

#: eeschema/dialogs/dialog_schematic_find_base.cpp:31
msgid "&Search for:"
msgstr "찾기 (&S):"

#: eeschema/dialogs/dialog_schematic_find_base.cpp:36
#: pcbnew/dialogs/dialog_find_base.cpp:33
msgid "Text with optional wildcards"
msgstr "와일드카드 옵션이 포함된 텍스트"

#: eeschema/dialogs/dialog_schematic_find_base.cpp:41
msgid "Replace &with:"
msgstr "바꾸기 (&w):"

#: eeschema/dialogs/dialog_schematic_find_base.cpp:52
msgid "Direction:"
msgstr "방향:"

#: eeschema/dialogs/dialog_schematic_find_base.cpp:61
msgid "F&orward"
msgstr "앞으로 (&o)"

#: eeschema/dialogs/dialog_schematic_find_base.cpp:66
msgid "&Backward"
msgstr "이전으로 (&B)"

#: eeschema/dialogs/dialog_schematic_find_base.cpp:82
msgid "&Match case"
msgstr "대소문자 구분 (&M)"

#: eeschema/dialogs/dialog_schematic_find_base.cpp:85
#: pcbnew/dialogs/dialog_find_base.cpp:46
msgid "Words"
msgstr "단어"

#: eeschema/dialogs/dialog_schematic_find_base.cpp:89
#: pcbnew/dialogs/dialog_find_base.cpp:49
msgid "Wildcards"
msgstr "와일드카드"

#: eeschema/dialogs/dialog_schematic_find_base.cpp:92
msgid "Search pin &names and numbers"
msgstr "핀 이름 또는 번호 찾기 (&n)"

#: eeschema/dialogs/dialog_schematic_find_base.cpp:95
msgid "Search hidden fields"
msgstr "숨은 필드 찾기"

#: eeschema/dialogs/dialog_schematic_find_base.cpp:98
msgid "Search the current &sheet only"
msgstr "현재 시트 내에서만 찾기 (&s)"

#: eeschema/dialogs/dialog_schematic_find_base.cpp:101
msgid "Search the current selection &only"
msgstr "현재 선택 항목만 검색 (&o)"

#: eeschema/dialogs/dialog_schematic_find_base.cpp:104
msgid "Replace matches in reference designators"
msgstr "참조 지정자의 일치 항목 바꾸기"

#: eeschema/dialogs/dialog_schematic_find_base.cpp:123
msgid "Replace"
msgstr "교체"

#: eeschema/dialogs/dialog_schematic_setup.cpp:41
msgid "Schematic Setup"
msgstr "회로도 설정"

#: eeschema/dialogs/dialog_schematic_setup.cpp:42
msgid "Import Settings from Another Project..."
msgstr "다른 프로젝트에서 설정 가져오기..."

#: eeschema/dialogs/dialog_schematic_setup.cpp:79
msgid "Electrical Rules"
msgstr "전기 규칙"

#: eeschema/dialogs/dialog_schematic_setup.cpp:98
#: eeschema/sch_base_frame.cpp:277
#: pcbnew/dialogs/dialog_board_statistics.cpp:668
#: pcbnew/footprint_libraries_utils.cpp:422
msgid "Project"
msgstr "프로젝트"

#: eeschema/dialogs/dialog_schematic_setup.cpp:109
#: pcbnew/dialogs/dialog_board_setup.cpp:186
#: pcbnew/widgets/appearance_controls.cpp:517
#: pcbnew/widgets/appearance_controls.cpp:2359
#: pcbnew/widgets/appearance_controls_base.cpp:118
#: pcbnew/widgets/search_handlers.cpp:345
#: pcbnew/widgets/search_handlers.cpp:429
msgid "Net Classes"
msgstr "네트 클래스"

#: eeschema/dialogs/dialog_schematic_setup.cpp:116
msgid "Bus Alias Definitions"
msgstr "버스 별칭 정의"

#: eeschema/dialogs/dialog_schematic_setup.cpp:122
#: pcbnew/dialogs/dialog_board_setup.cpp:140
msgid "Text Variables"
msgstr "텍스트 변수"

#: eeschema/dialogs/dialog_schematic_setup.cpp:133
msgid "Project is missing or read-only. Settings will not be editable."
msgstr "프로젝트를 찾을 수 없거나 읽기 전용입니다. 설정은 수정할 수 없습니다."

#: eeschema/dialogs/dialog_schematic_setup.cpp:175
#, c-format
msgid ""
"Error importing settings from project:\n"
"Project file %s could not be loaded."
msgstr ""
"프로젝트 세팅을 가져오는 도중 오류가 발생하였습니다:\n"
"프로젝트 파일 %s은(는) 불러올 수 없습니다."

#: eeschema/dialogs/dialog_shape_properties.cpp:169
#: eeschema/dialogs/dialog_wire_bus_properties.cpp:231
#, c-format
msgid "Edit %s"
msgstr "편집 %s"

#: eeschema/dialogs/dialog_shape_properties_base.cpp:88
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:232
msgid "Filled shape"
msgstr "도형 채움"

#: eeschema/dialogs/dialog_shape_properties_base.cpp:122
msgid "Set border width to 0 to use schematic's default line width."
msgstr "회로도의 기본 선 너비를 사용하려면 테두리 너비를 0으로 설정합니다."

#: eeschema/dialogs/dialog_shape_properties_base.cpp:126
msgid "Clear colors to use Schematic Editor colors."
msgstr "회로도의 편집기 색상을 사용하려면 색상을 지웁니다."

#: eeschema/dialogs/dialog_sheet_pin_properties.cpp:179
msgid "Edit Sheet Pin"
msgstr "시트 핀 편집"

#: eeschema/dialogs/dialog_sheet_pin_properties_base.h:84
msgid "Sheet Pin Properties"
msgstr "시트 핀 속성"

#: eeschema/dialogs/dialog_sheet_properties.cpp:270
msgid "A sheet must have a valid file name."
msgstr "시트는 유효한 파일 이름이 있어야 합니다."

#: eeschema/dialogs/dialog_sheet_properties.cpp:309
msgid "Use relative path for sheet file?"
msgstr "시트 파일에 대해 상대 경로를 사용할까요?"

#: eeschema/dialogs/dialog_sheet_properties.cpp:310
msgid "Sheet File Path"
msgstr "시트 파일 경로"

#: eeschema/dialogs/dialog_sheet_properties.cpp:313
msgid ""
"Using relative hierarchical sheet file name paths improves schematic "
"portability across systems and platforms.  Using absolute paths can result "
"in portability issues."
msgstr ""
"상대적인 계층 시트 파일 이름 경로를 사용하면 시스템 및 플랫폼 전반의 회로도 "
"이식성이 향상됩니다.  절대 경로는 이식 문제가 발생할 수 있습니다."

#: eeschema/dialogs/dialog_sheet_properties.cpp:317
msgid "Use Relative Path"
msgstr "상대 경로 사용"

#: eeschema/dialogs/dialog_sheet_properties.cpp:318
msgid "Use Absolute Path"
msgstr "절대 경로 사용"

#: eeschema/dialogs/dialog_sheet_properties.cpp:349
msgid "Untitled Sheet"
msgstr "이름 없는 시트"

#: eeschema/dialogs/dialog_sheet_properties.cpp:386
msgid "Note: item colors are overridden in the current color theme."
msgstr "참고: 항목 색상은 현재 색상 테마에 의해 재정의됩니다."

#: eeschema/dialogs/dialog_sheet_properties.cpp:388
#, c-format
msgid ""
"To see individual item colors uncheck '%s'\n"
"in Preferences > Schematic Editor > Colors."
msgstr ""
"개별 항목 색상을 보려면 '%s'를 선택 해제한다\n"
"환경 설정 > 회로도 편집기 > 색상."

#: eeschema/dialogs/dialog_sheet_properties.cpp:439
#, c-format
msgid ""
"Cannot normalize new sheet schematic file path:\n"
"'%s'\n"
"against parent sheet schematic file path:\n"
"'%s'."
msgstr ""
"새로운 시트 회로도 파일 경로를 부모 파일 경로에 대해 정상화할 수 없습니다:\n"
"'%s'\n"
"부모 시트 회로도 파일 경로는 다음과 같습니다:\n"
"'%s'."

#: eeschema/dialogs/dialog_sheet_properties.cpp:481
#: kicad/tools/kicad_manager_control.cpp:651
#, c-format
msgid "'%s' already exists."
msgstr "'%s'이(가) 이미 있습니다."

#: eeschema/dialogs/dialog_sheet_properties.cpp:484
#, c-format
msgid "Link '%s' to this file?"
msgstr "'%s'을(를) 이 파일에 연결할까요?"

#: eeschema/dialogs/dialog_sheet_properties.cpp:524
#, c-format
msgid "Change '%s' link from '%s' to '%s'?"
msgstr "'%s' 링크를 '%s'에서 '%s'(으)로 변경하겠습니까?"

#: eeschema/dialogs/dialog_sheet_properties.cpp:529
#: eeschema/dialogs/dialog_sheet_properties.cpp:546
msgid "This action cannot be undone."
msgstr "이 작업은 취소할 수 없습니다."

#: eeschema/dialogs/dialog_sheet_properties.cpp:541
#, c-format
msgid "Create new file '%s' with contents of '%s'?"
msgstr "'%s' 파일을 생성하여 '%s' 내용을 포함할까요?"

#: eeschema/dialogs/dialog_sheet_properties.cpp:579
#, c-format
msgid "Error occurred saving schematic file '%s'."
msgstr "'%s'회로도 파일을 저장하는 중 오류 발생."

#: eeschema/dialogs/dialog_sheet_properties.cpp:583
#, c-format
msgid "Failed to save schematic '%s'"
msgstr "회로도 '%s'를 저장하지 못함"

#: eeschema/dialogs/dialog_sheet_properties.cpp:672
msgid "A sheet must have a name."
msgstr "시트에는 이름이 있어야 합니다."

#: eeschema/dialogs/dialog_sheet_properties.cpp:680
msgid "A sheet must have a file specified."
msgstr "시트에는 지정된 파일이 있어야 합니다."

#: eeschema/dialogs/dialog_sheet_properties_base.cpp:128
#: eeschema/lib_field.cpp:552 eeschema/lib_pin.cpp:1194
#: eeschema/lib_pin.cpp:1196 eeschema/lib_text.cpp:419
#: eeschema/lib_textbox.cpp:490 eeschema/sch_field.cpp:916
#: eeschema/sch_label.cpp:1204 eeschema/sch_pin.cpp:259
#: eeschema/sch_text.cpp:413 eeschema/sch_textbox.cpp:454
msgid "Style"
msgstr "스타일"

#: eeschema/dialogs/dialog_sheet_properties_base.cpp:130
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:194
msgid "Border width:"
msgstr "테두리 폭:"

#: eeschema/dialogs/dialog_sheet_properties_base.cpp:144
msgid "Border color:"
msgstr "테두리 색상:"

#: eeschema/dialogs/dialog_sheet_properties_base.cpp:157
msgid "Background fill:"
msgstr "배경 채우기:"

#: eeschema/dialogs/dialog_sheet_properties_base.cpp:178
msgid "Page number:"
msgstr "페이지 번호:"

#: eeschema/dialogs/dialog_sheet_properties_base.cpp:193
msgid "Hierarchical path:"
msgstr "계층 경로:"

#: eeschema/dialogs/dialog_sheet_properties_base.cpp:197
msgid "path"
msgstr "경로"

#: eeschema/dialogs/dialog_sheet_properties_base.h:83
msgid "Sheet Properties"
msgstr "시트 속성"

#: eeschema/dialogs/dialog_sim_command.cpp:268
msgid "A DC source must be specified."
msgstr "DC 소스가 지정되어야 함."

#: eeschema/dialogs/dialog_sim_command.cpp:361
msgid "Source 1 and Source 2 must be different."
msgstr "소스 1과 소스 2는 서로 달라야 합니다."

#: eeschema/dialogs/dialog_sim_command.cpp:417
msgid "A frequency range must be specified."
msgstr "주파수 범위를 지정해야 합니다."

#: eeschema/dialogs/dialog_sim_command.cpp:612
msgid "New Simulation Tab"
msgstr "신규 시뮬레이션 탭"

#: eeschema/dialogs/dialog_sim_command_base.cpp:21
msgid "Analysis type:"
msgstr "분석 유형:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:25
msgid "AC"
msgstr "AC"

#: eeschema/dialogs/dialog_sim_command_base.cpp:25
msgid "DC"
msgstr "DC"

#: eeschema/dialogs/dialog_sim_command_base.cpp:25
msgid "OP"
msgstr "OP"

#: eeschema/dialogs/dialog_sim_command_base.cpp:25
msgid "TRAN"
msgstr "TRAN"

#: eeschema/dialogs/dialog_sim_command_base.cpp:25
msgid "FFT"
msgstr "FFT"

#: eeschema/dialogs/dialog_sim_command_base.cpp:25
msgid "NOISE"
msgstr "NOISE"

#: eeschema/dialogs/dialog_sim_command_base.cpp:25
msgid "SP"
msgstr "SP"

#: eeschema/dialogs/dialog_sim_command_base.cpp:25 pcbnew/pad.cpp:1890
msgid "Custom"
msgstr "사용자 정의"

#: eeschema/dialogs/dialog_sim_command_base.cpp:47
#: eeschema/dialogs/dialog_sim_command_base.cpp:402
#: eeschema/dialogs/dialog_sim_command_base.cpp:472
msgid "Decade"
msgstr "10진법"

#: eeschema/dialogs/dialog_sim_command_base.cpp:47
#: eeschema/dialogs/dialog_sim_command_base.cpp:402
#: eeschema/dialogs/dialog_sim_command_base.cpp:472
msgid "Octave"
msgstr "8진법"

#: eeschema/dialogs/dialog_sim_command_base.cpp:47
#: eeschema/dialogs/dialog_sim_command_base.cpp:402
#: eeschema/dialogs/dialog_sim_command_base.cpp:472
msgid "Linear"
msgstr "선형"

#: eeschema/dialogs/dialog_sim_command_base.cpp:49
#: eeschema/dialogs/dialog_sim_command_base.cpp:404
#: eeschema/dialogs/dialog_sim_command_base.cpp:474
msgid "Frequency scale"
msgstr "주파수 배율"

#: eeschema/dialogs/dialog_sim_command_base.cpp:60
#: eeschema/dialogs/dialog_sim_command_base.cpp:415
#: eeschema/dialogs/dialog_sim_command_base.cpp:485
msgid "Number of points per decade:"
msgstr "10개 당 포인트 수 :"

#: eeschema/dialogs/dialog_sim_command_base.cpp:70
#: eeschema/dialogs/dialog_sim_command_base.cpp:427
#: eeschema/dialogs/dialog_sim_command_base.cpp:497
msgid "Start frequency:"
msgstr "시작 주파수:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:79
#: eeschema/dialogs/dialog_sim_command_base.cpp:90
#: eeschema/dialogs/dialog_sim_command_base.cpp:436
#: eeschema/dialogs/dialog_sim_command_base.cpp:449
#: eeschema/dialogs/dialog_sim_command_base.cpp:506
#: eeschema/dialogs/dialog_sim_command_base.cpp:519
#: pcb_calculator/widgets/unit_selector.cpp:103
msgid "Hz"
msgstr "Hz"

#: eeschema/dialogs/dialog_sim_command_base.cpp:83
#: eeschema/dialogs/dialog_sim_command_base.cpp:440
#: eeschema/dialogs/dialog_sim_command_base.cpp:510
msgid "Stop frequency:"
msgstr "정지 주파수:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:111
msgid "Source 2"
msgstr "소스 2"

#: eeschema/dialogs/dialog_sim_command_base.cpp:116
#: eeschema/dialogs/dialog_sim_command_base.cpp:122
#: eeschema/dialogs/dialog_sim_command_base.cpp:161
#: eeschema/dialogs/dialog_sim_command_base.cpp:172
#: eeschema/dialogs/dialog_sim_command_base.cpp:183
#: eeschema/dialogs/dialog_sim_command_base.cpp:192
#: eeschema/dialogs/dialog_sim_command_base.cpp:203
#: eeschema/dialogs/dialog_sim_command_base.cpp:212
#: eeschema/dialogs/panel_setup_formatting_base.cpp:300
#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:50
#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:130
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:176
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:192
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:168
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:266
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:246
#: pcb_calculator/widgets/unit_selector.cpp:256
msgid "V"
msgstr "V"

#: eeschema/dialogs/dialog_sim_command_base.cpp:116
#: eeschema/dialogs/dialog_sim_command_base.cpp:122
#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:200
msgid "I"
msgstr "I"

#: eeschema/dialogs/dialog_sim_command_base.cpp:116
#: eeschema/dialogs/dialog_sim_command_base.cpp:122
msgid "R"
msgstr "R"

#: eeschema/dialogs/dialog_sim_command_base.cpp:116
#: eeschema/dialogs/dialog_sim_command_base.cpp:122
msgid "TEMP"
msgstr "TEMP"

#: eeschema/dialogs/dialog_sim_command_base.cpp:128
msgid "Source:"
msgstr "소스:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:132
msgid "Sweep type:"
msgstr "스윕 종류:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:136
msgid "Source 1"
msgstr "소스 1"

#: eeschema/dialogs/dialog_sim_command_base.cpp:152
msgid "Starting value:"
msgstr "시작 값:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:176
msgid "Final value:"
msgstr "최종 값:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:196
msgid "Increment step:"
msgstr "증가량:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:222
msgid "Swap sources"
msgstr "소스 뒤바꾸기"

#: eeschema/dialogs/dialog_sim_command_base.cpp:251
msgid "Time step:"
msgstr "시간 단계:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:260
#: eeschema/dialogs/dialog_sim_command_base.cpp:271
#: eeschema/dialogs/dialog_sim_command_base.cpp:282
#: eeschema/dialogs/dialog_sim_command_base.cpp:297
msgid "seconds"
msgstr "초"

#: eeschema/dialogs/dialog_sim_command_base.cpp:264
msgid "Final time:"
msgstr "최종 시간:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:275
msgid "Initial time:"
msgstr "초기 시간:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:286
msgid "(optional; default 0)"
msgstr "(선택사항; 기본값 0)"

#: eeschema/dialogs/dialog_sim_command_base.cpp:290
msgid "Max time step:"
msgstr "최대 시간 단계:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:301
msgid "(optional; default min{tstep, (tstop-tstart)/50})"
msgstr "(선택사항; 기본값 min{tstep, (tstop-tstart)/50})"

#: eeschema/dialogs/dialog_sim_command_base.cpp:305
msgid "Use initial conditions"
msgstr "초기 조건 사용"

#: eeschema/dialogs/dialog_sim_command_base.cpp:323
msgid "Input signals:"
msgstr "입력 신호:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:338
msgid "Linearize inputs before performing FFT"
msgstr "FFT를 수행하기 전에 입력 선형화하기"

#: eeschema/dialogs/dialog_sim_command_base.cpp:359
msgid "Measured node:"
msgstr "측정된 노드:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:371
msgid "Reference node:"
msgstr "참조 노드:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:380
msgid "(optional; default GND)"
msgstr "(선택사항; 기본값은 GND)"

#: eeschema/dialogs/dialog_sim_command_base.cpp:384
msgid "Noise source:"
msgstr "노이즈 소스:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:459
msgid "Save contributions from all noise generators"
msgstr "모든 소음 발생기의 기여도 저장"

#: eeschema/dialogs/dialog_sim_command_base.cpp:526
msgid "Compute noise current correlation matrix"
msgstr "잡음 전류 상관 행렬 계산"

#: eeschema/dialogs/dialog_sim_command_base.cpp:538
msgid "Spice directives:"
msgstr "Spice 지시문:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:547
msgid "Load directives from schematic"
msgstr "회로도에서 지시문 불러오기"

#: eeschema/dialogs/dialog_sim_command_base.cpp:567
msgid "Transfer function:"
msgstr "전달 함수:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:571
msgid "(output voltage) / (input voltage)"
msgstr "(출력 전압) / (입력 전압)"

#: eeschema/dialogs/dialog_sim_command_base.cpp:571
msgid "(output voltage) / (input current)"
msgstr "(출력 전압) / (입력 전류)"

#: eeschema/dialogs/dialog_sim_command_base.cpp:577
msgid "Input:"
msgstr "입력:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:586
#: eeschema/dialogs/dialog_sim_command_base.cpp:604
msgid "Ref:"
msgstr "Ref:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:595
msgid "Output:"
msgstr "출력:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:619
msgid "Find:"
msgstr "찾기:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:623
msgid "Poles and Zeros"
msgstr "영점과 극점"

#: eeschema/dialogs/dialog_sim_command_base.cpp:623
msgid "Poles"
msgstr "극점"

#: eeschema/dialogs/dialog_sim_command_base.cpp:623
msgid "Zeros"
msgstr "영점"

#: eeschema/dialogs/dialog_sim_command_base.cpp:643
msgid "Add full path for .include library directives"
msgstr ".include 라이브러리 지시문에 대한 전체 경로 추가"

#: eeschema/dialogs/dialog_sim_command_base.cpp:659
msgid "Compatibility mode:"
msgstr "호환 모드:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:663
msgid "User configuration"
msgstr "사용자 설정"

#: eeschema/dialogs/dialog_sim_command_base.cpp:663
msgid "Spice"
msgstr "Spice"

#: eeschema/dialogs/dialog_sim_command_base.cpp:663
msgid "PSpice"
msgstr "PSpice"

#: eeschema/dialogs/dialog_sim_command_base.cpp:663
msgid "LTSpice"
msgstr "LTSpice"

#: eeschema/dialogs/dialog_sim_command_base.cpp:663
msgid "PSpice and LTSpice"
msgstr "PSpice와 LTSpice"

#: eeschema/dialogs/dialog_sim_command_base.cpp:663
msgid "HSpice"
msgstr "HSpice"

#: eeschema/dialogs/dialog_sim_command_base.cpp:679
msgid "SPICE Command"
msgstr "SPICE 명령"

#: eeschema/dialogs/dialog_sim_command_base.cpp:686
#: eeschema/dialogs/dialog_sim_command_base.cpp:725
#: eeschema/dialogs/dialog_sim_command_base.cpp:762
#, c-format
msgid "Fixed %s scale"
msgstr "고정 %s 스케일"

#: eeschema/dialogs/dialog_sim_command_base.cpp:697
#: eeschema/dialogs/dialog_sim_command_base.cpp:736
#: eeschema/dialogs/dialog_sim_command_base.cpp:773
msgid "Min:"
msgstr "최소:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:704
#: eeschema/dialogs/dialog_sim_command_base.cpp:743
#: eeschema/dialogs/dialog_sim_command_base.cpp:780
msgid "Max:"
msgstr "최대:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:802
msgid "Show grid"
msgstr "그리드 보이기"

#: eeschema/dialogs/dialog_sim_command_base.cpp:806
msgid "Show legend"
msgstr "범례 표시"

#: eeschema/dialogs/dialog_sim_command_base.cpp:809
msgid "Dotted current/phase"
msgstr "점선 전류/위상"

#: eeschema/dialogs/dialog_sim_command_base.cpp:819
msgid "Margins:"
msgstr "마진:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:829
#: pagelayout_editor/dialogs/properties_frame_base.cpp:551
msgid "Left:"
msgstr "왼쪽:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:833
#: eeschema/dialogs/dialog_sim_command_base.cpp:874
msgid "70"
msgstr "70"

#: eeschema/dialogs/dialog_sim_command_base.cpp:846
#: pagelayout_editor/dialogs/properties_frame_base.cpp:579
msgid "Top:"
msgstr "상단:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:850
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:28
msgid "30"
msgstr "30"

#: eeschema/dialogs/dialog_sim_command_base.cpp:855
#: pagelayout_editor/dialogs/properties_frame_base.cpp:593
msgid "Bottom:"
msgstr "하단:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:859
msgid "45"
msgstr "45"

#: eeschema/dialogs/dialog_sim_command_base.cpp:870
#: pagelayout_editor/dialogs/properties_frame_base.cpp:565
msgid "Right:"
msgstr "오른쪽:"

#: eeschema/dialogs/dialog_sim_command_base.cpp:889
msgid "Plot Setup"
msgstr "플롯 설정"

#: eeschema/dialogs/dialog_sim_command_base.h:219
msgid "Simulation Analysis"
msgstr "시뮬레이션 해석"

#: eeschema/dialogs/dialog_sim_format_value.cpp:36
#: eeschema/sim/sim_plot_tab.cpp:655
msgid "Voltage"
msgstr "전압"

#: eeschema/dialogs/dialog_sim_format_value.cpp:41
#: eeschema/sim/sim_plot_tab.cpp:656 eeschema/sim/sim_plot_tab.cpp:776
msgid "Current"
msgstr "전류"

#: eeschema/dialogs/dialog_sim_format_value.cpp:46
#: eeschema/sim/sim_plot_tab.cpp:654 eeschema/sim/simulator_frame_ui.cpp:597
#: eeschema/sim/simulator_frame_ui_base.cpp:169
msgid "Time"
msgstr "시간"

#: eeschema/dialogs/dialog_sim_format_value.cpp:51
#: eeschema/sim/sim_plot_tab.cpp:559 eeschema/sim/sim_plot_tab.cpp:581
#: eeschema/sim/sim_plot_tab.cpp:611 eeschema/sim/sim_plot_tab.cpp:633
#: pcb_calculator/transline_ident.cpp:109
msgid "Frequency"
msgstr "주파수"

#: eeschema/dialogs/dialog_sim_format_value.cpp:56
#: eeschema/sim/sim_plot_tab.cpp:560
msgid "Gain"
msgstr "이득"

#: eeschema/dialogs/dialog_sim_format_value.cpp:61
#: eeschema/sim/sim_plot_tab.cpp:561 eeschema/sim/sim_plot_tab.cpp:583
msgid "Phase"
msgstr "위상"

#: eeschema/dialogs/dialog_sim_format_value_base.cpp:25
msgid "Significant digits:"
msgstr "유효 자릿수:"

#: eeschema/dialogs/dialog_sim_format_value_base.cpp:32
msgid "Range:"
msgstr "범위:"

#: eeschema/dialogs/dialog_sim_format_value_base.cpp:36
msgid "f"
msgstr "f"

#: eeschema/dialogs/dialog_sim_format_value_base.cpp:36
msgid "p"
msgstr "p"

#: eeschema/dialogs/dialog_sim_format_value_base.cpp:36
msgid "n"
msgstr "n"

#: eeschema/dialogs/dialog_sim_format_value_base.cpp:36
#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions_base.cpp:32
#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions_base.cpp:43
#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions_base.cpp:58
msgid "u"
msgstr "u"

#: eeschema/dialogs/dialog_sim_format_value_base.cpp:36
#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:232
#: pcb_calculator/widgets/unit_selector.cpp:211
msgid "m"
msgstr "m"

#: eeschema/dialogs/dialog_sim_format_value_base.cpp:36
msgid "K"
msgstr "K"

#: eeschema/dialogs/dialog_sim_format_value_base.cpp:36
msgid "M"
msgstr "M"

#: eeschema/dialogs/dialog_sim_format_value_base.cpp:36
msgid "G"
msgstr "G"

#: eeschema/dialogs/dialog_sim_format_value_base.cpp:36
msgid "T"
msgstr "T"

#: eeschema/dialogs/dialog_sim_format_value_base.cpp:36
msgid "P"
msgstr "P"

#: eeschema/dialogs/dialog_sim_format_value_base.h:47
#, c-format
msgid "Format %s"
msgstr "형식 %s"

#: eeschema/dialogs/dialog_sim_model.cpp:227
msgid "<unknown>"
msgstr "<알 수 없음>"

#: eeschema/dialogs/dialog_sim_model.cpp:237
#, c-format
msgid "No model named '%s' in library."
msgstr "라이브러리에 '%s' 모델이 없습니다."

#: eeschema/dialogs/dialog_sim_model.cpp:318
msgid "Failed to read simulation model from fields."
msgstr "필드에서 시뮬레이션 모델을 읽기 실패."

#: eeschema/dialogs/dialog_sim_model.cpp:502
msgid "Component:"
msgstr "부품:"

#: eeschema/dialogs/dialog_sim_model.cpp:502
#: eeschema/dialogs/dialog_sim_model_base.cpp:54
msgid "Model:"
msgstr "모델:"

#: eeschema/dialogs/dialog_sim_model.cpp:565
#, c-format
msgid "Save parameter '%s (%s)' in Value field"
msgstr "매개변수 '%s (%s)'을 값 필드에 저장"

#: eeschema/dialogs/dialog_sim_model.cpp:573
msgid "Save primary parameter in Value field"
msgstr "기본 매개변수를 값 필드에 저장"

#: eeschema/dialogs/dialog_sim_model.cpp:590
#: pcbnew/footprint_wizard_frame.cpp:325
msgid "Parameter"
msgstr "매개변수"

#: eeschema/dialogs/dialog_sim_model.cpp:593 eeschema/lib_item.cpp:72
#: eeschema/lib_pin.cpp:1193 eeschema/sch_label.cpp:1198
#: eeschema/sch_pin.cpp:237 eeschema/sch_pin.cpp:258
#: eeschema/symbol_editor/symbol_editor.cpp:1294
#: eeschema/widgets/search_handlers.cpp:216
#: eeschema/widgets/search_handlers.cpp:300 gerbview/gerber_draw_item.cpp:668
#: pagelayout_editor/dialogs/dialog_design_inspector_base.cpp:36
#: pagelayout_editor/dialogs/properties_frame_base.cpp:29
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:83
#: pcbnew/generators/pcb_tuning_pattern.cpp:1901 pcbnew/pcb_marker.cpp:194
#: pcbnew/pcb_shape.cpp:471 pcbnew/pcb_text.cpp:229 pcbnew/pcb_track.cpp:1068
#: pcbnew/pcb_track.cpp:1135 pcbnew/tools/drawing_stackup_table_tool.cpp:250
#: pcbnew/widgets/search_handlers.cpp:205 pcbnew/zone.cpp:549
msgid "Type"
msgstr "형식"

#: eeschema/dialogs/dialog_sim_model.cpp:709
#: eeschema/dialogs/dialog_sim_model.cpp:752
msgid "Not Connected"
msgstr "연결되지 않음"

#: eeschema/dialogs/dialog_sim_model.cpp:1208
msgid "Browse Models"
msgstr "모델 찾아보기"

#: eeschema/dialogs/dialog_sim_model_base.cpp:30
msgid "SPICE model from file (*.lib, *.sub or *.ibs)"
msgstr "SPICE 모델의 파일(* .lib, * .sub 또는 * .ibs)"

#: eeschema/dialogs/dialog_sim_model_base.cpp:66
msgid "Pin:"
msgstr "핀:"

#: eeschema/dialogs/dialog_sim_model_base.cpp:73
msgid "Differential"
msgstr "차동"

#: eeschema/dialogs/dialog_sim_model_base.cpp:76
msgid "Pin model:"
msgstr "핀 모델:"

#: eeschema/dialogs/dialog_sim_model_base.cpp:83
msgid "Waveform:"
msgstr "파형:"

#: eeschema/dialogs/dialog_sim_model_base.cpp:100
msgid "Built-in SPICE model"
msgstr "내장 SPICE 모델"

#: eeschema/dialogs/dialog_sim_model_base.cpp:109
msgid "Device:"
msgstr "장치:"

#: eeschema/dialogs/dialog_sim_model_base.cpp:118
msgid "Device type:"
msgstr "기기 유형:"

#: eeschema/dialogs/dialog_sim_model_base.cpp:145
#: eeschema/widgets/search_handlers.cpp:133
#: eeschema/widgets/search_handlers.cpp:218
#: eeschema/widgets/search_handlers.cpp:302
msgid "Page"
msgstr "페이지"

#: eeschema/dialogs/dialog_sim_model_base.cpp:152
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:43
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:23
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:23
#: pcbnew/footprint_wizard_frame.cpp:194
msgid "Parameters"
msgstr "매개변수"

#: eeschema/dialogs/dialog_sim_model_base.cpp:199
msgid "Code"
msgstr "코드"

#: eeschema/dialogs/dialog_sim_model_base.cpp:206
msgid "Save {} in Value field as \"{}\""
msgstr "값 필드에 {}을(를) \"{}\"로 저장"

#: eeschema/dialogs/dialog_sim_model_base.cpp:219
msgid "Model"
msgstr "모델"

#: eeschema/dialogs/dialog_sim_model_base.cpp:238
msgid "Symbol Pin"
msgstr "심볼 핀"

#: eeschema/dialogs/dialog_sim_model_base.cpp:239
msgid "Model Pin"
msgstr "모델 핀"

#: eeschema/dialogs/dialog_sim_model_base.cpp:300
msgid "Pin Assignments"
msgstr "핀 할당"

#: eeschema/dialogs/dialog_sim_model_base.h:124
msgid "Simulation Model Editor"
msgstr "시뮬레이션 모델 편집기"

#: eeschema/dialogs/dialog_symbol_chooser.cpp:46
msgid "Choose Symbol"
msgstr "심볼 선택"

#: eeschema/dialogs/dialog_symbol_chooser.cpp:67
msgid "Choose Power Symbol"
msgstr "전원 심볼 선택"

#: eeschema/dialogs/dialog_symbol_chooser.cpp:69
#: eeschema/symbol_chooser_frame.cpp:103
#: pcbnew/dialogs/dialog_footprint_chooser.cpp:61
#: pcbnew/footprint_chooser_frame.cpp:136
#, c-format
msgid " (%d items loaded)"
msgstr " (%d개 항목 불러옴)"

#: eeschema/dialogs/dialog_symbol_chooser.cpp:74
msgid "Place repeated copies"
msgstr "복사본 반복 배치"

#: eeschema/dialogs/dialog_symbol_chooser.cpp:75
msgid "Keep the symbol selected for subsequent clicks."
msgstr "이후의 클릭을 위해 심볼을 선택한 상태로 유지합니다."

#: eeschema/dialogs/dialog_symbol_chooser.cpp:77
msgid "Place all units"
msgstr "모든 유닛 배치"

#: eeschema/dialogs/dialog_symbol_chooser.cpp:78
msgid "Sequentially place all units of the symbol."
msgstr "심볼의 모든 유닛을 순차적으로 배치합니다."

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:93
#: eeschema/fields_grid_table.cpp:884
msgid "Select Footprint..."
msgstr "풋프린트 선택..."

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:94
#: eeschema/fields_grid_table.cpp:885
msgid "Browse for footprint"
msgstr "풋프린트 찾기"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:99
#: eeschema/fields_grid_table.cpp:891 eeschema/tools/ee_actions.cpp:76
msgid "Show Datasheet"
msgstr "데이터 시트 보기"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:100
#: eeschema/fields_grid_table.cpp:892
msgid "Show datasheet in browser"
msgstr "브라우저에서 데이터 시트 보기"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:188
#: eeschema/sch_label.cpp:1185
msgid "Label"
msgstr "라벨"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:191
msgid "Group By"
msgstr "그룹화"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:617
msgid "Qty"
msgstr "수량"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:618
msgid "#"
msgstr "#"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:647
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:738
msgid "New field name:"
msgstr "새 필드 이름:"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:647
msgid "Add Field"
msgstr "필드 추가"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:656
msgid "Field must have a name."
msgstr "필드에는 이름이 포함되어 있어야 합니다."

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:664
#: eeschema/dialogs/dialog_symbol_properties.cpp:889
#, c-format
msgid "Field name '%s' already in use."
msgstr "필드 이름 '%s'은(는) 이미 사용 중입니다."

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:692
#, c-format
msgid "Are you sure you want to remove the field '%s'?"
msgstr "'%s' 필드를 제거하시겠습니까?"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:738
msgid "Rename Field"
msgstr "필드 이름 변경"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:753
#, c-format
msgid "Field name %s already exists. Cannot rename over existing field."
msgstr "필드 이름 %s가 이미 존재합니다. 기존 필드의 이름을 변경할 수 없습니다."

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:845
msgid "The Quantity column cannot be grouped by."
msgstr "수량 열은 그룹화할 수 없음."

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:853
msgid "The Item Number column cannot be grouped by."
msgstr "항목 번호 열은 그룹화할 수 없음."

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1200
msgid "Bill of Materials Output File"
msgstr "BOM 출력 파일"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1212
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1221
msgid "BOM Output File"
msgstr "BOM 출력 파일"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1219
msgid ""
"Cannot make path relative (target volume different from schematic file "
"volume)!"
msgstr "상대 경로를 만들 수 없음(대상 볼륨이 회로도 파일 볼륨과 다름)!"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1232
msgid "Unsaved data"
msgstr "데이터가 저장되지 않음"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1233
msgid "Changes are unsaved. Export unsaved data?"
msgstr "변경 사항이 저장되지 않음. 미저장한 데이터를 내보낼까요?"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1254
msgid "No filename specified in exporter"
msgstr "내보내기에 지정된 파일 이름이 없음"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1268
#, c-format
msgid "Could not open/create path '%s'."
msgstr "경로 '%s'를 열거나 만들 수 없음."

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1277
#, c-format
msgid "Could not create BOM output '%s'."
msgstr "BOM 출력 '%s'를 만들 수 없음."

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1286
#, c-format
msgid "Could not write BOM output '%s'."
msgstr "BOM 출력 '%s'를 작성할 수 없음."

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1291
#, c-format
msgid "Wrote BOM output to '%s'"
msgstr "BOM 출력을 '%s'에 기록함"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1598
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1999
msgid "BOM preset name:"
msgstr "BOM 사전 설정 이름:"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1598
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1999
msgid "Save BOM Preset"
msgstr "BOM 사전 설정 저장"

#: eeschema/dialogs/dialog_symbol_fields_table.cpp:1624
#: eeschema/dialogs/dialog_symbol_fields_table.cpp:2025
#: pcbnew/widgets/appearance_controls.cpp:2665
msgid ""
"Default presets cannot be modified.\n"
"Please use a different name."
msgstr ""
"기본 사전 설정은 수정할 수 없습니다.\n"
"다른 이름을 사용해 주세요."

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:63
msgid "View presets:"
msgstr "사전 설정 보기:"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:100
msgid "Exclude DNP"
msgstr "DNP 제외"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:106
msgid "Group symbols"
msgstr "심볼 그룹화"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:108
msgid "Group symbols together based on common properties"
msgstr "기본 속성을 기반으로 심볼 분류하기"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:159
msgid "Scope:"
msgstr "범위:"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:163
msgid "Entire project"
msgstr "전체 프로젝트"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:169
msgid "Recursive"
msgstr "반복"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:172
msgid "Cross-probe action:"
msgstr "교차 탐색 작업:"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:176
#: gerbview/tools/gerbview_selection_tool.cpp:46
msgid "Highlight"
msgstr "강조"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:179
#: pcbnew/tools/pcb_selection_tool.cpp:91
msgid "Select"
msgstr "선택"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:199
msgid "Edit"
msgstr "편집"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:211
msgid "Field delimiter:"
msgstr "필드 구분자:"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:215
#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:233
msgid ","
msgstr ","

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:220
msgid "String delimiter:"
msgstr "문자열 구분자:"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:224
msgid "\""
msgstr "\""

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:229
msgid "Reference delimiter:"
msgstr "참조 구분자:"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:238
msgid "Range delimiter:"
msgstr "범위 구분자:"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:242
#: pagelayout_editor/dialogs/dialog_design_inspector_base.cpp:35
msgid "-"
msgstr "-"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:243
msgid "Leave blank to disable ranges."
msgstr "범위를 비활성화하려면 비워 둡니다."

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:248
msgid "Keep tabs"
msgstr "탭 유지"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:251
msgid "Keep line breaks"
msgstr "줄 바꿈 유지"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:257
msgid "Format presets:"
msgstr "형식 사전 설정:"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:273
msgid "Output file:"
msgstr "출력 파일:"

#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:318
#: eeschema/dialogs/dialog_symbol_fields_table_base.cpp:328
#: eeschema/menubar.cpp:123 eeschema/symbol_editor/menubar_symbol_editor.cpp:75
#: pcbnew/dialogs/dialog_export_2581.cpp:45
#: pcbnew/dialogs/dialog_export_step.cpp:140
#: pcbnew/dialogs/dialog_export_svg.cpp:88
#: pcbnew/menubar_footprint_editor.cpp:73 pcbnew/menubar_pcb_editor.cpp:126
msgid "Export"
msgstr "내보내기"

#: eeschema/dialogs/dialog_symbol_fields_table_base.h:139
msgid "Symbol Fields Table"
msgstr "심볼 필드 테이블"

#: eeschema/dialogs/dialog_symbol_properties.cpp:152
msgid "Base Name"
msgstr "기본 이름"

#: eeschema/dialogs/dialog_symbol_properties.cpp:153
#: eeschema/dialogs/dialog_symbol_properties_base.cpp:281
msgid "Alternate Assignment"
msgstr "대체 할당"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:133
#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:22
msgid "Unit:"
msgstr "유닛:"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:144
msgid "Alternate symbol (De Morgan)"
msgstr "대체 기호 (드 모르간)"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:145
msgid ""
"Use the alternate shape of this symbol.\n"
"For gates, this is the \"De Morgan\" conversion"
msgstr ""
"해당 심볼의 대체 형태를 사용합니다.\n"
"게이트에 대해선, \"De Morgan\" 변환이 적용됩니다"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:149
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:352
#: pcbnew/dialogs/dialog_create_array_base.cpp:426
#: pcbnew/dialogs/dialog_move_exact.cpp:207
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:333
#: pcbnew/dialogs/dialog_position_relative.cpp:160
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:165
msgid "Angle:"
msgstr "각도:"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:153
msgid "+90"
msgstr "+90"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:153
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:144
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:340
msgid "-90"
msgstr "-90"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:153
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:145
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:341
msgid "180"
msgstr "180"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:159
msgid "Mirror:"
msgstr "반전:"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:163
msgid "Not mirrored"
msgstr "반전되지 않음"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:163
msgid "Around X axis"
msgstr "X축 주위 (상하) 반전"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:163
msgid "Around Y axis"
msgstr "Y축 주위 (좌우) 반전"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:177
msgid "Show pin numbers"
msgstr "핀 번호 표시"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:183
msgid "Show pin names"
msgstr "핀 이름 표시"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:208
msgid ""
"This is useful for adding symbols for board footprints such as fiducials\n"
"and logos that you do not want to appear in the bill of materials export"
msgstr ""
"이 기능은 자재 명세서를 내보낼 때 같이 표시되지 않기를 원하는\n"
"기준점과 로고를 추가하는 데에 도움이 됩니다"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:213
msgid ""
"This is useful for adding symbols that only get exported to the bill of "
"materials but\n"
"not required to layout the board such as mechanical fasteners and enclosures"
msgstr ""
"이 기능은 자재 명세서를 내보낼 때만 같이 출력되고, 기계식 고정 장치나 인클로"
"저 등\n"
"기판의 위에는 표시될 필요가 없는 심볼을 추가할 때 도움이 됩니다"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:217
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:215
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:216
#: pcbnew/drc/drc_test_provider_library_parity.cpp:581
#: pcbnew/drc/drc_test_provider_schematic_parity.cpp:163
msgid "Do not populate"
msgstr "부착하지 않음"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:229
msgid "Update Symbol from Library..."
msgstr "라이브러리에서 심볼 업데이트..."

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:232
#: eeschema/tools/ee_actions.cpp:681
msgid "Change Symbol..."
msgstr "심볼 변경..."

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:235
msgid "Edit Symbol..."
msgstr "심볼 편집..."

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:241
#: eeschema/tools/ee_actions.cpp:940
msgid "Edit Library Symbol..."
msgstr "라이브러리 심볼 편집 ..."

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:279
#: eeschema/lib_pin.cpp:1669 eeschema/sch_pin.cpp:524
msgid "Pin Number"
msgstr "핀 번호"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:280
msgid "Base Pin Name"
msgstr "기본 핀 이름"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:305
msgid "Pin Functions"
msgstr "핀 기능"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:318
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:384
msgid "Library link:"
msgstr "라이브러리 링크:"

#: eeschema/dialogs/dialog_symbol_properties_base.cpp:328
msgid "Simulation Model..."
msgstr "시뮬레이션 모델..."

#: eeschema/dialogs/dialog_symbol_properties_base.h:110
msgid "Symbol Properties"
msgstr "심볼 속성"

#: eeschema/dialogs/dialog_symbol_remap.cpp:63
#, c-format
msgid ""
"Remapping is not possible because you have insufficient privileges to the "
"project folder '%s'."
msgstr "프로젝트 폴더 '%s'에 대한 권한이 부족하므로 리매핑이 불가능합니다."

#: eeschema/dialogs/dialog_symbol_remap.cpp:75
msgid ""
"This schematic currently uses the project symbol library list look up method "
"for loading library symbols.  KiCad will attempt to map the existing symbols "
"to use the new symbol library table.  Remapping will change some project "
"files and schematics may not be compatible with older versions of KiCad.  "
"All files that are changed will be backed up to the \"rescue-backup\" folder "
"in the project folder should you need to revert any changes.  If you choose "
"to skip this step, you will be responsible for manually remapping the "
"symbols."
msgstr ""
"이 회로도는 현재 라이브러리 심볼을 로드하기 위해 프로젝트 심볼 라이브러리 목"
"록 조회 방법을 사용합니다.  KiCad는 새 심볼 라이브러리 테이블을 사용하기 위"
"해 기존 심볼을 매핑하려고 시도합니다.  매핑을 다시 수행하면 일부 프로젝트 파"
"일이 변경되고 회로도가 이전 버전의 KiCad와 호환되지 않을 수 있습니다.  변경"
"된 모든 파일은 변경 사항을 되돌릴 필요가 있는 경우 프로젝트 폴더의 \"rescue-"
"backup\" 폴더에 백업됩니다.  이 단계를 건너뛰는 경우 심볼을 수동으로 다시 매"
"핑해야 합니다."

#: eeschema/dialogs/dialog_symbol_remap.cpp:215
#, c-format
msgid "Adding library '%s', file '%s' to project symbol library table."
msgstr ""
"프로젝트 심볼 라이브러리 테이블에 라이브러리 '%s', 파일 '%s'을(를) 추가합니"
"다."

#: eeschema/dialogs/dialog_symbol_remap.cpp:224
#: eeschema/dialogs/panel_sym_lib_table.cpp:887
#: pcbnew/dialogs/panel_fp_lib_table.cpp:842
#, c-format
msgid "Library '%s' not found."
msgstr "라이브러리 '%s'을(를) 찾을 수 없습니다."

#: eeschema/dialogs/dialog_symbol_remap.cpp:241
#, c-format
msgid ""
"Error writing project symbol library table.\n"
"  %s"
msgstr ""
"프로젝트 심볼 라이브러리 테이블을 작성하는 중 오류가 발생했습니다.\n"
"  %s"

#: eeschema/dialogs/dialog_symbol_remap.cpp:245
msgid "Created project symbol library table.\n"
msgstr "프로젝트 심볼 라이브러리 테이블을 생성했습니다.\n"

#: eeschema/dialogs/dialog_symbol_remap.cpp:270
#, c-format
msgid "No symbol %s found in symbol library table."
msgstr "심볼 라이브러리 테이블에 심볼 %s이(가) 없습니다."

#: eeschema/dialogs/dialog_symbol_remap.cpp:276
#, c-format
msgid "Symbol %s mapped to symbol library '%s'."
msgstr "심볼 %s이(가) 심볼 라이브러리 '%s' 에 매핑되었습니다."

#: eeschema/dialogs/dialog_symbol_remap.cpp:285
msgid "Symbol library table mapping complete!"
msgstr "심볼 라이브러리 테이블 매핑 완료!"

#: eeschema/dialogs/dialog_symbol_remap.cpp:355
#, c-format
msgid "Cannot create project remap back up folder '%s'."
msgstr "프로젝트 리매핑 백업 폴더 '%s'을(를) 만들 수 없습니다."

#: eeschema/dialogs/dialog_symbol_remap.cpp:358
#: eeschema/dialogs/dialog_symbol_remap.cpp:510
msgid "Backup Error"
msgstr "백업 오류"

#: eeschema/dialogs/dialog_symbol_remap.cpp:360
#: eeschema/dialogs/dialog_symbol_remap.cpp:514
msgid "Continue with Rescue"
msgstr "복구한 후 계속하기"

#: eeschema/dialogs/dialog_symbol_remap.cpp:361
#: eeschema/dialogs/dialog_symbol_remap.cpp:515
msgid "Abort Rescue"
msgstr "복구 중단"

#: eeschema/dialogs/dialog_symbol_remap.cpp:381
#: eeschema/dialogs/dialog_symbol_remap.cpp:416
#: eeschema/dialogs/dialog_symbol_remap.cpp:441
#: eeschema/dialogs/dialog_symbol_remap.cpp:462
#: eeschema/dialogs/dialog_symbol_remap.cpp:478
#: eeschema/dialogs/dialog_symbol_remap.cpp:494
#, c-format
msgid "Backing up file '%s' to '%s'."
msgstr "파일 '%s'을(를) '%s'(으)로 백업중 입니다."

#: eeschema/dialogs/dialog_symbol_remap.cpp:389
#: eeschema/dialogs/dialog_symbol_remap.cpp:431
#: eeschema/dialogs/dialog_symbol_remap.cpp:449
#: eeschema/dialogs/dialog_symbol_remap.cpp:470
#: eeschema/dialogs/dialog_symbol_remap.cpp:486
#: eeschema/dialogs/dialog_symbol_remap.cpp:502
#, c-format
msgid "Failed to back up file '%s'.\n"
msgstr "파일 '%s'을(를) 백업하지 못했습니다.\n"

#: eeschema/dialogs/dialog_symbol_remap.cpp:423
#, c-format
msgid "Failed to create backup folder '%s'.\n"
msgstr "백업 폴더 '%s'을(를) 생성하지 못했습니다.\n"

#: eeschema/dialogs/dialog_symbol_remap.cpp:509
msgid "Some of the project files could not be backed up."
msgstr "일부 프로젝트 파일을 백업할 수 없습니다."

#: eeschema/dialogs/dialog_symbol_remap_base.cpp:30
#: eeschema/dialogs/dialog_symbol_remap_base.h:54
msgid "Remap Symbols"
msgstr "심볼 다시 매핑"

#: eeschema/dialogs/dialog_text_properties.cpp:159 eeschema/schematic.cpp:453
msgid "<root sheet>"
msgstr "<루트 시트>"

#: eeschema/dialogs/dialog_text_properties.cpp:162
#, c-format
msgid "Page %s (%s)"
msgstr "페이지 %s (%s)"

#: eeschema/dialogs/dialog_text_properties.cpp:455
msgid ""
"Invalid hyperlink destination. Please enter either a valid URL (e.g. file:// "
"or http(s)://) or \"#<page number>\" to create a hyperlink to a page in this "
"schematic."
msgstr ""
"하이퍼링크 경로가 잘못되었습니다. 유효한 URL(예: file:// 또는 http(s)://) 또"
"는 \"#<페이지 번호>\"을 입력하여 이 회로도의 페이지에 대한 하이퍼링크를 만드"
"십시오."

#: eeschema/dialogs/dialog_text_properties.cpp:539
msgid "Edit Text"
msgstr "텍스트 편집"

#: eeschema/dialogs/dialog_text_properties_base.cpp:292
msgid "Link:"
msgstr "링크:"

#: eeschema/dialogs/dialog_text_properties_base.cpp:294
msgid "Make this text item a clickable hyperlink"
msgstr "이 텍스트 항목을 클릭 가능한 하이퍼링크로 만들기"

#: eeschema/dialogs/dialog_update_from_pcb.cpp:43
#: pcbnew/dialogs/dialog_import_netlist.cpp:77
#: pcbnew/dialogs/dialog_update_pcb.cpp:49
msgid "Changes To Be Applied"
msgstr "적용할 변경 사항"

#: eeschema/dialogs/dialog_update_from_pcb.cpp:67
msgid "Update Schematic"
msgstr "회로도 업데이트"

#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:32
#: pcbnew/dialogs/dialog_update_pcb_base.cpp:27
msgid ""
"Re-link footprints to schematic symbols based on their reference designators"
msgstr "참조 지정자를 기반으로 풋프린트를 회로도 심볼에 재연결"

#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:33
#: pcbnew/dialogs/dialog_update_pcb_base.cpp:28
msgid ""
"Normally footprints are linked to their symbols via their Unique IDs.  "
"Select this option only if you want to reset the footprint linkages based on "
"their reference designators."
msgstr ""
"일반적으로 풋프린트는 고유 ID를 통해 심볼에 연결됩니다.  참조 지정자를 기반으"
"로 풋프린트 연결을 초기화하려는 경우에만 이 옵션을 선택합니다."

#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:55
msgid "Update references of symbols that have been changed in the PCB editor."
msgstr "PCB 편집기에서 변경된 심볼의 참조를 업데이트합니다."

#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:59
msgid "Footprint assignments"
msgstr "풋프린트 할당"

#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:60
msgid ""
"Update footprint associations of symbols whose footprints have been replaced "
"with different footprints in PCB."
msgstr ""
"PCB에서 풋프린트가 다른 풋프린트로 대체된 심볼의 풋프린트 연결을 업데이트합니"
"다."

#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:65
msgid "Update symbols values that have been replaced in the PCB editor."
msgstr "PCB 편집기에서 대체된 값으로 심볼 값을 업데이트합니다."

#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:69
msgid "Net names"
msgstr "네트 이름"

#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:75
msgid "Other fields"
msgstr "기타 필드"

#: eeschema/dialogs/dialog_update_from_pcb_base.cpp:76
msgid "Update all other fields in the symbol from the footprint"
msgstr "풋프린트에서 심볼의 다른 모든 필드를 업데이트"

#: eeschema/dialogs/dialog_update_from_pcb_base.h:57
#: eeschema/tools/backannotate.cpp:584
msgid "Update Schematic from PCB"
msgstr "PCB에서 회로도 업데이트"

#: eeschema/dialogs/dialog_update_symbol_fields.cpp:221
#: eeschema/dialogs/dialog_update_symbol_fields_base.h:68
msgid "Update Symbol Fields"
msgstr "심볼 필드 업데이트"

#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:21
msgid "Parent symbol:"
msgstr "상위 심볼:"

#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:61
msgid "Remove fields if not in parent symbol"
msgstr "상위 심볼에 없는 경우 필드 제거"

#: eeschema/dialogs/dialog_update_symbol_fields_base.cpp:66
msgid "Reset fields if empty in parent symbol"
msgstr "상위 심볼이 비어 있는 경우 필드 초기화"

#: eeschema/dialogs/dialog_user_defined_signals.cpp:253
#: eeschema/sch_label.cpp:2056 pcbnew/dialogs/panel_setup_rules.cpp:767
msgid "Syntax Help"
msgstr "구문 도움말"

#: eeschema/dialogs/dialog_user_defined_signals_base.h:63
msgid "User-defined Signals"
msgstr "사용자 정의 신호"

#: eeschema/dialogs/dialog_wire_bus_properties.cpp:231
msgid "Wire/Bus"
msgstr "선/버스"

#: eeschema/dialogs/dialog_wire_bus_properties.cpp:232
msgid "Wires/Buses"
msgstr "선/버스"

#: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:30
msgid "Wire/bus width:"
msgstr "배선/버스 폭:"

#: eeschema/dialogs/dialog_wire_bus_properties_base.cpp:90
msgid "Set width to 0 to use netclass's wire/bus widths."
msgstr "네트클래스의 배선폭을 사용하려면 너비를 0으로 설정하십시오."

#: eeschema/dialogs/dialog_wire_bus_properties_base.h:69
msgid "Wire & Bus Properties"
msgstr "배선 및 버스 속성"

#: eeschema/dialogs/panel_bom_presets_base.cpp:20
msgid "Bill of Materials Presets:"
msgstr "자재명세서 사전 설정:"

#: eeschema/dialogs/panel_bom_presets_base.cpp:60
msgid "Bill of Materials Formatting Presets:"
msgstr "자재 명세서 서식 사전 설정:"

#: eeschema/dialogs/panel_eeschema_annotation_options_base.cpp:20
msgid "Automatically annotate symbols"
msgstr "심볼에 자동으로 주석달기"

#: eeschema/dialogs/panel_eeschema_color_settings.cpp:144
msgid ""
"Some items have the same color as the background\n"
"and they will not be seen on the screen.  Are you\n"
"sure you want to use these colors?"
msgstr ""
"일부 항목에는 배경과 동일한 색상이 있으며,\n"
"이는 화면에 표시되지 않을 것입니다.\n"
"이 색상을 사용하시겠습니까?"

#: eeschema/dialogs/panel_eeschema_color_settings.cpp:204
msgid "(symbol editor only)"
msgstr "(심볼 편집기만 해당)"

#: eeschema/dialogs/panel_eeschema_color_settings.cpp:249
#: pcbnew/dialogs/panel_pcbnew_color_settings.cpp:792
msgid "Color Preview"
msgstr "색 미리보기"

#: eeschema/dialogs/panel_eeschema_color_settings.cpp:436
msgid "/path/to/sheet"
msgstr "/경로/대상/시트"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:40
msgid "Default font:"
msgstr "기본 글꼴:"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:53
msgid "S&how hidden pins"
msgstr "숨은 핀 표시 (&h)"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:56
msgid "Show hidden fields"
msgstr "숨은 필드 표시"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:59
msgid "Show ERC errors"
msgstr "ERC 오류 표시"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:62
msgid "Show ERC warnings"
msgstr "ERC 경고 표시"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:65
msgid "Show ERC exclusions"
msgstr "ERC 제외 표시"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:68
msgid "Show OP voltages"
msgstr "OP 전압 표시"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:71
msgid "Show OP currents"
msgstr "OP 전류 표시"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:74
msgid "Show page limi&ts"
msgstr "페이지 제한 표시 (&t)"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:84
#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:100
msgid "Selection && Highlighting"
msgstr "선택 및 강조 표시"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:94
msgid "Draw selected child items"
msgstr "선택된 하위 항목 그리기"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:97
msgid "Fill selected shapes"
msgstr "선택한 도형 채우기"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:106
msgid "Selection thickness:"
msgstr "선택 두께:"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:114
msgid "(selection color can be edited in the \"Colors\" page)"
msgstr "(선택 색상은 \"색상\" 페이지에서 편집할 수 있습니다)"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:118
msgid "Highlight thickness:"
msgstr "두께 강조 표시:"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:135
#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:120
msgid "Cross-probing"
msgstr "교차-탐지"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:145
msgid "Select/highlight objects corresponding to PCB selection"
msgstr "PCB 선택에 해당하는 오브젝트 선택/강조"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:147
msgid "Highlight symbols corresponding to selected footprints"
msgstr "선택한 풋프린트에 해당하는 심볼 강조 표시"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:151
#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:136
msgid "Center view on cross-probed items"
msgstr "교차 탐색 항목의 중앙 보기"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:153
msgid "Ensures that cross-probed symbols are visible in the current view"
msgstr "교차 탐색된 심볼은 현재 뷰에 표시되게 함"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:157
#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:142
msgid "Zoom to fit cross-probed items"
msgstr "교차 탐색된 항목에 맞게 확대/축소"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:161
#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:146
msgid "Highlight cross-probed nets"
msgstr "교차 탐색된 네트 강조 표시"

#: eeschema/dialogs/panel_eeschema_display_options_base.cpp:163
msgid "Highlight nets when they are highlighted in the PCB editor"
msgstr "PCB 편집기에서 강조 표시될 때 네트 강조"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:33
msgid "Line drawing mode:"
msgstr "선 그리기 모드:"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:37
msgid "Free Angle"
msgstr "자유 각도"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:37
msgid "90 deg Angle"
msgstr "90도 각도"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:37
msgid "45 deg Angle"
msgstr "45도 각도"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:46
msgid "Mouse drag performs Drag (G) operation"
msgstr "마우스 드래그는 끌기 작업을 수행 (G)"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:47
msgid "If unchecked, mouse drag will perform move (M) operation"
msgstr "이 옵션을 선택하지 않으면 마우스 끌기가 이동 (M) 작업을 수행합니다"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:51
msgid "Automatically start wires on unconnected pins"
msgstr "연결되지 않은 핀에 자동으로 선 연결 시작"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:52
msgid ""
"When enabled, you can start wiring by clicking on unconnected pins even when "
"the wire tool is not active"
msgstr ""
"활성화된 경우, 와이어 도구가 활성화되지 않은 경우에도 연결되지 않은 핀을 클릭"
"하여 와이어링을 시작할 수 있습니다"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:56
#: pcbnew/dialogs/panel_edit_options_base.cpp:368
msgid "<ESC> clears net highlighting"
msgstr "<ESC>는 네트 강조 표시를 지움"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:57
msgid ""
"First <ESC> in selection tool clears selection, next clears net highlighting"
msgstr ""
"선택 도구의 첫 번째 <ESC>는 선택을 지우고 다음은 네트 강조 표시를 지웁니다"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:67
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:20
msgid "Defaults for New Objects"
msgstr "새 오브젝트의 기본값"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:77
msgid "Sheet border:"
msgstr "시트 경계:"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:86
msgid "Sheet background:"
msgstr "시트 배경:"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:111
msgid "Clicking on a pin selects the symbol"
msgstr "핀을 클릭하면 심볼이 선택됨"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:112
msgid ""
"In schematic editor:\n"
"If enabled, clicking on a pin select the parent symbol.\n"
"If disabled, clicking on a pin select only the pin."
msgstr ""
"개략도 편집기에서:\n"
"활성화된 경우, 핀을 클릭하여 상위 심볼을 선택합니다.\n"
"비활성화된 경우, 핀을 클릭하여 핀만 선택합니다."

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:127
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:185
#: pcbnew/dialogs/panel_edit_options_base.cpp:97
#: pcbnew/dialogs/panel_edit_options_base.cpp:169
msgid "Left Click Mouse Commands"
msgstr "마우스 왼쪽 클릭 명령"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:137
#: pcbnew/dialogs/panel_edit_options_base.cpp:99
msgid ""
"Left click (and drag) actions depend on 2 modifier keys:\n"
"Shift and Ctrl"
msgstr ""
"좌클릭 (및 끌기) 동작은 2개의 수정자 키에 따라 달라짐:\n"
"Shift 및 Ctrl입니다"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:146
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:204
#: pcbnew/dialogs/panel_edit_options_base.cpp:123
#: pcbnew/dialogs/panel_edit_options_base.cpp:195
msgid "Long Click"
msgstr "길게 클릭"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:150
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:208
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:232
#: pcbnew/dialogs/panel_edit_options_base.cpp:128
#: pcbnew/dialogs/panel_edit_options_base.cpp:200
#: pcbnew/dialogs/panel_edit_options_base.cpp:241
msgid "Clarify selection from menu"
msgstr "메뉴에서 선택 항목을 명확하게 지정 함"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:158
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:216
#: pcbnew/dialogs/panel_edit_options_base.cpp:138
#: pcbnew/dialogs/panel_edit_options_base.cpp:210
msgid "Add item(s) to selection"
msgstr "선택에 항목을 추가함"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:162
#: pcbnew/dialogs/panel_edit_options_base.cpp:143
msgid "Ctrl+Shift"
msgstr "Ctrl+Shift"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:166
#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:224
#: pcbnew/dialogs/panel_edit_options_base.cpp:148
#: pcbnew/dialogs/panel_edit_options_base.cpp:220
msgid "Remove item(s) from selection"
msgstr "선택 항목을 제거함"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:195
#: pcbnew/dialogs/panel_edit_options_base.cpp:171
msgid ""
"Left click (and drag) actions depend on 3 modifier keys:\n"
"Option, Shift and Cmd"
msgstr ""
"좌클릭 (및 끌기) 동작은 3개의 수정자 키에 따라 달라짐:\n"
"Option, Shift 및 Cmd"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:220
#: pcbnew/dialogs/panel_edit_options_base.cpp:215
msgid "Shift+Cmd"
msgstr "Shift+Cmd"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:256
msgid "Symbol Field Automatic Placement"
msgstr "심볼 필드 자동 배치"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:266
msgid "A&utomatically place symbol fields"
msgstr "심볼 필드를 자동으로 배치 (&u)"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:269
msgid "A&llow field autoplace to change justification"
msgstr "필드 자동 배치가 위치 지정 변경 허용 (&l)"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:272
msgid "Al&ways align autoplaced fields to the 50 mil grid"
msgstr "자동 배치된 필드를 항상 50 mil 그리드에 정렬 (&w)"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:281
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:104
msgid "Repeated Items"
msgstr "반복 항목"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:296
msgid "&Horizontal pitch:"
msgstr "수평 피치 (&H):"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:307
msgid "&Vertical pitch:"
msgstr "수직 피치 (&V):"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:318
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:130
msgid "Label increment:"
msgstr "라벨 증가:"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:337
msgid "Dialog Preferences"
msgstr "대화 기본 설정"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:347
msgid "Show footprint previews in Symbol Chooser"
msgstr "심볼 선택기에서 풋프린트 미리 보기 표시"

#: eeschema/dialogs/panel_eeschema_editing_options_base.cpp:350
msgid "Never show Rescue Symbols tool"
msgstr "복구 심볼 도구 표시 안 함"

#: eeschema/dialogs/panel_setup_buses.cpp:267
#, c-format
msgid "Alias name '%s' already in use."
msgstr "별칭 이름 '%s'는 이미 사용 중입니다."

#: eeschema/dialogs/panel_setup_buses.cpp:291
msgid "Member net/alias name cannot be empty."
msgstr "멤버 네트/별칭 이름은 비워둘 수 없습니다."

#: eeschema/dialogs/panel_setup_buses_base.cpp:24
msgid "Bus definitions:"
msgstr "버스 정의:"

#: eeschema/dialogs/panel_setup_buses_base.cpp:44
msgid "Alias"
msgstr "별명"

#: eeschema/dialogs/panel_setup_buses_base.cpp:76
msgid "(source)"
msgstr "(출처)"

#: eeschema/dialogs/panel_setup_buses_base.cpp:94
#, c-format
msgid "Members of '%s':"
msgstr "'%s'의 멤버:"

#: eeschema/dialogs/panel_setup_buses_base.cpp:114
msgid "Net / Nested Bus Name"
msgstr "Net / Nested 버스 이름"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:25
#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:27
#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:37
msgid "Annotations"
msgstr "주석"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:30
msgid "Symbol unit notation:"
msgstr "심볼 단위 표기:"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:34
msgid ".A"
msgstr ".A"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:34
msgid "-A"
msgstr "-A"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:34
msgid "_A"
msgstr "_A"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:34
msgid ".1"
msgstr ".1"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:34
msgid "-1"
msgstr "-1"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:34
msgid "_1"
msgstr "_1"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:55
#: eeschema/dialogs/panel_sym_editing_options_base.cpp:51
msgid "Default text size:"
msgstr "기본 텍스트 크기:"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:66
msgid "Overbar offset ratio:"
msgstr "윗줄 오프셋 비율:"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:77
msgid "Label offset ratio:"
msgstr "라벨 오프셋 비율:"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:79
#: eeschema/dialogs/panel_setup_formatting_base.cpp:84
msgid ""
"Percentage of the text size to offset labels above (or below) a wire, bus, "
"or pin"
msgstr ""
"와이어, 버스 또는 핀의 위(또는 아래)에 레이블을 오프셋할 텍스트 크기의 백분율"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:92
msgid "Global label margin ratio:"
msgstr "전역 라벨 여백 비율:"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:94
#: eeschema/dialogs/panel_setup_formatting_base.cpp:99
msgid "Percentage of the text size to use as space around a global label"
msgstr "전역 라벨 주위에 공백으로 사용되는 텍스트 크기 백분율"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:122
#: eeschema/import_gfx/dialog_import_gfx_sch_base.cpp:158
msgid "Default line width:"
msgstr "기본 선 너비:"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:133
msgid "Pin symbol size:"
msgstr "핀 심볼 크기:"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:151
#: eeschema/erc_item.cpp:42 pcbnew/dialogs/dialog_pad_properties_base.cpp:919
msgid "Connections"
msgstr "연결"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:158
msgid "Junction dot size:"
msgstr "접합 점 크기:"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:162
msgid "Smallest"
msgstr "특소형"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:162
msgid "Largest"
msgstr "특대형"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:168
msgid "Connection grid:"
msgstr "연결 격자:"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:194
msgid "Inter-sheet References"
msgstr "시트 간 참조"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:196
msgid "Show inter-sheet references"
msgstr "시트 간 참조 표시"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:202
msgid "Show own page reference"
msgstr "자체 페이지 참조 표시"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:206
msgid "Standard (1,2,3)"
msgstr "표준 (1,2,3)"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:210
msgid "Abbreviated (1..3)"
msgstr "약어 (1..3)"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:219
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:130
msgid "Prefix:"
msgstr "접두어:"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:223
msgid "["
msgstr "["

#: eeschema/dialogs/panel_setup_formatting_base.cpp:228
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:155
msgid "Suffix:"
msgstr "접미사:"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:232
msgid "]"
msgstr "]"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:247
#: pcbnew/dialogs/panel_setup_formatting_base.cpp:21
msgid "Dashed Lines"
msgstr "점선"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:254
#: pcbnew/dialogs/panel_setup_formatting_base.cpp:28
msgid "Dash length:"
msgstr "대시 길이:"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:261
#: pcbnew/dialogs/panel_setup_formatting_base.cpp:35
msgid "Gap length:"
msgstr "갭 길이:"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:271
#: pcbnew/dialogs/panel_setup_formatting_base.cpp:45
msgid "Dash and dot lengths are ratios of the line width."
msgstr "대시와 도트 길이는 선 너비의 비율입니다."

#: eeschema/dialogs/panel_setup_formatting_base.cpp:279
msgid "Operating-point Overlay"
msgstr "작동점 오버레이"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:288
msgid "Significant digits (voltages):"
msgstr "유효 자릿수(전압):"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:296
msgid "Range (voltages):"
msgstr "범위(전압):"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:300
msgid "fV"
msgstr "fV"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:300
msgid "pV"
msgstr "pV"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:300
msgid "nV"
msgstr "nV"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:300
msgid "uV"
msgstr "uV"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:300
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion_base.cpp:73
#: pcb_calculator/widgets/unit_selector.cpp:255
msgid "mV"
msgstr "mV"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:300
msgid "KV"
msgstr "KV"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:300
msgid "MV"
msgstr "MV"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:300
msgid "GV"
msgstr "GV"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:300
msgid "TV"
msgstr "TV"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:300
msgid "PV"
msgstr "PV"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:307
msgid "Significant digits (currents):"
msgstr "유효 자릿수(전류):"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:315
msgid "Range (currents):"
msgstr "범위(전류):"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:319
msgid "fA"
msgstr "fA"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:319
msgid "pA"
msgstr "pA"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:319
msgid "nA"
msgstr "nA"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:319
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:208
#: pcb_calculator/dialogs/dialog_regulator_form_base.cpp:68
msgid "uA"
msgstr "μA"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:319
msgid "mA"
msgstr "mA"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:319
msgid "KA"
msgstr "KA"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:319
msgid "MA"
msgstr "MA"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:319
msgid "GA"
msgstr "GA"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:319
msgid "TA"
msgstr "TA"

#: eeschema/dialogs/panel_setup_formatting_base.cpp:319
msgid "PA"
msgstr "PA"

#: eeschema/dialogs/panel_setup_pinmap.cpp:225
msgid "No error or warning"
msgstr "오류 또는 경고 없음"

#: eeschema/dialogs/panel_setup_pinmap.cpp:230
msgid "Generate warning"
msgstr "경고 생성"

#: eeschema/dialogs/panel_setup_pinmap.cpp:235
msgid "Generate error"
msgstr "생성 오류"

#: eeschema/dialogs/panel_sym_color_settings_base.cpp:24
msgid "Use schematic editor color theme"
msgstr "회로도 편집기 색상 테마 사용"

#: eeschema/dialogs/panel_sym_color_settings_base.cpp:30
msgid "Use theme:"
msgstr "다음 테마 사용:"

#: eeschema/dialogs/panel_sym_editing_options_base.cpp:36
msgid "&Default line width:"
msgstr "기본 선 너비 (&D):"

#: eeschema/dialogs/panel_sym_editing_options_base.cpp:47
msgid ""
"Set to 0 to allow symbols to inherit line width properties\n"
"from schematic"
msgstr ""
"심볼이 선 너비 속성을 상속하도록 허용하려면 0으로 설정\n"
"회로도에서"

#: eeschema/dialogs/panel_sym_editing_options_base.cpp:62
msgid "D&efault pin length:"
msgstr "기본 핀 길이 (&e):"

#: eeschema/dialogs/panel_sym_editing_options_base.cpp:73
msgid "De&fault pin number size:"
msgstr "기본 핀 번호 크기 (&F):"

#: eeschema/dialogs/panel_sym_editing_options_base.cpp:84
msgid "Def&ault pin name size:"
msgstr "기본 핀 이름 크기 (&a):"

#: eeschema/dialogs/panel_sym_editing_options_base.cpp:98
msgid "Show pin &electrical type"
msgstr "핀과 전기 유형을 표시 (&e)"

#: eeschema/dialogs/panel_sym_editing_options_base.cpp:119
msgid "&Pitch of repeated pins:"
msgstr "반복되는 핀의 피치 (&P):"

#: eeschema/dialogs/panel_sym_lib_table.cpp:430
#: pcbnew/dialogs/panel_fp_lib_table.cpp:539
msgid "A library table row nickname and path cells are empty."
msgstr "라이브러리 테이블 행 별칭 및 경로 셀이 비어 있습니다."

#: eeschema/dialogs/panel_sym_lib_table.cpp:432
#: pcbnew/dialogs/panel_fp_lib_table.cpp:541
msgid "A library table row nickname cell is empty."
msgstr "라이브러리 테이블 행 별칭 셀이 비어 있습니다."

#: eeschema/dialogs/panel_sym_lib_table.cpp:434
#: pcbnew/dialogs/panel_fp_lib_table.cpp:543
msgid "A library table row path cell is empty."
msgstr "라이브러리 테이블 행 경로 셀이 비어 있습니다."

#: eeschema/dialogs/panel_sym_lib_table.cpp:438
#: pcbnew/dialogs/panel_fp_lib_table.cpp:547
msgid "Invalid Row Definition"
msgstr "잘못된 행 정의"

#: eeschema/dialogs/panel_sym_lib_table.cpp:440
#: pcbnew/dialogs/panel_fp_lib_table.cpp:549
msgid ""
"Empty cells will result in all rows that are invalid to be removed from the "
"table."
msgstr "셀이 비어 있으면 테이블에서 제거할 수 없는 모든 행이 생성됩니다."

#: eeschema/dialogs/panel_sym_lib_table.cpp:442
#: pcbnew/dialogs/panel_fp_lib_table.cpp:551
msgid "Remove Invalid Cells"
msgstr "잘못된 셀 제거"

#: eeschema/dialogs/panel_sym_lib_table.cpp:443
#: pcbnew/dialogs/panel_fp_lib_table.cpp:552
msgid "Cancel Table Update"
msgstr "테이블 업데이트 취소"

#: eeschema/dialogs/panel_sym_lib_table.cpp:456
#, c-format
msgid "Illegal character '%c' in nickname '%s'"
msgstr "잘못된 문자 '%c'이(가) 별칭 '%s' 에서 발견됨"

#: eeschema/dialogs/panel_sym_lib_table.cpp:469
#: eeschema/dialogs/panel_sym_lib_table.cpp:521
#: pcbnew/dialogs/panel_fp_lib_table.cpp:578
#: pcbnew/dialogs/panel_fp_lib_table.cpp:626
msgid "Library Nickname Error"
msgstr "라이브러리 별명 오류"

#: eeschema/dialogs/panel_sym_lib_table.cpp:508
#: pcbnew/dialogs/panel_fp_lib_table.cpp:612
#, c-format
msgid "Multiple libraries cannot share the same nickname ('%s')."
msgstr "여러 라이브러리가 동일한 닉네임 ('%s') 을 공유할 수 없습니다."

#: eeschema/dialogs/panel_sym_lib_table.cpp:557 eeschema/symbol_library.cpp:576
#, c-format
msgid "Symbol library '%s' failed to load."
msgstr "심볼 라이브러리 '%s'을(를) 불러오기 실패하였습니다."

#: eeschema/dialogs/panel_sym_lib_table.cpp:562
msgid "Error Loading Library"
msgstr "라이브러리 불러오기 중 오류"

#: eeschema/dialogs/panel_sym_lib_table.cpp:607 eeschema/files-io.cpp:726
#: eeschema/import_gfx/dialog_import_gfx_sch.cpp:200
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:78
#: pcbnew/files.cpp:150 pcbnew/footprint_libraries_utils.cpp:119
#: pcbnew/import_gfx/dialog_import_graphics.cpp:213
msgid "All supported formats"
msgstr "지원되는 모든 형식"

#: eeschema/dialogs/panel_sym_lib_table.cpp:619
msgid "Add Library"
msgstr "라이브러리 추가"

#: eeschema/dialogs/panel_sym_lib_table.cpp:633
msgid "Warning: Duplicate Nickname"
msgstr "경고: 중복된 닉네임"

#: eeschema/dialogs/panel_sym_lib_table.cpp:634
#: pcbnew/dialogs/panel_fp_lib_table.cpp:1017
#, c-format
msgid "A library nicknamed '%s' already exists."
msgstr "'%s'라는 별칭의 라이브러리가 이미 있습니다."

#: eeschema/dialogs/panel_sym_lib_table.cpp:635
#: pcbnew/dialogs/panel_fp_lib_table.cpp:1018
msgid "One of the nicknames will need to be changed after adding this library."
msgstr "이 라이브러리를 추가한 후 별명 중 하나를 변경해야 합니다."

#: eeschema/dialogs/panel_sym_lib_table.cpp:654 eeschema/sch_base_frame.cpp:284
#: pcbnew/dialogs/panel_fp_lib_table.cpp:1038
#: pcbnew/footprint_libraries_utils.cpp:429 pcbnew/tools/pcb_actions.cpp:588
msgid "Skip"
msgstr "건너뛰기"

#: eeschema/dialogs/panel_sym_lib_table.cpp:654
#: pcbnew/dialogs/panel_fp_lib_table.cpp:1038
msgid "Add Anyway"
msgstr "강제로 추가"

#: eeschema/dialogs/panel_sym_lib_table.cpp:855
msgid ""
"Select one or more rows containing libraries to save as current KiCad format "
"(*.kicad_sym)."
msgstr ""
"라이브러리가 포함된 행을 하나 이상 선택하여 현재 KiCad 형식(*.kicad_sym)으로 "
"저장합니다."

#: eeschema/dialogs/panel_sym_lib_table.cpp:863
#, c-format
msgid ""
"Save '%s' as current KiCad format (*.kicad_sym) and replace legacy entry in "
"table?"
msgstr ""
"'%s'을(를) 현재 KiCad 형식 (*.kicad_sym) 으로 저장하고 테이블에서 레거시 항목"
"을 바꾸시겠습니까?"

#: eeschema/dialogs/panel_sym_lib_table.cpp:869
#, c-format
msgid ""
"Save %d libraries as current KiCad format (*.kicad_sym) and replace legacy "
"entries in table?"
msgstr ""
"%d 라이브러리를 현재 KiCad 형식(*.kicad_sym)으로 저장하고 테이블의 기존 항목"
"을 교체할까요?"

#: eeschema/dialogs/panel_sym_lib_table.cpp:900
#: pcbnew/dialogs/dialog_export_step.cpp:409
#, c-format
msgid "File '%s' already exists. Do you want overwrite this file?"
msgstr "'%s' 파일이 이미 있습니다. 이 파일을 덮어쓰시겠습니까?"

#: eeschema/dialogs/panel_sym_lib_table.cpp:903
#: pcbnew/dialogs/panel_fp_lib_table.cpp:857
msgid "Migrate Library"
msgstr "라이브러리 이주"

#: eeschema/dialogs/panel_sym_lib_table.cpp:931 eeschema/libarch.cpp:129
#: eeschema/libarch.cpp:135
#, c-format
msgid "Failed to save symbol library file '%s'."
msgstr "심볼 라이브러리 파일 '%s'을(를) 저장하지 못했습니다."

#: eeschema/dialogs/panel_sym_lib_table.cpp:1158
msgid ""
"Modifications have been made to one or more symbol libraries.\n"
"Changes must be saved or discarded before the symbol library table can be "
"modified."
msgstr ""
"하나 이상의 심볼 라이브러리를 수정했습니다.\n"
"심볼 라이브러리 테이블을 수정하려면 먼저 변경 사항을 저장하거나 삭제해야 합니"
"다."

#: eeschema/dialogs/panel_sym_lib_table.cpp:1172
msgid "Symbol Libraries"
msgstr "심볼 라이브러리"

#: eeschema/dialogs/panel_sym_lib_table.cpp:1194
#: eeschema/tools/sch_editor_control.cpp:483
#: pcbnew/dialogs/panel_fp_lib_table.cpp:1227
#, c-format
msgid ""
"Error saving global library table:\n"
"\n"
"%s"
msgstr ""
"전역 라이브러리 테이블 저장 오류 :\n"
"\n"
"%s"

#: eeschema/dialogs/panel_sym_lib_table.cpp:1195
#: eeschema/dialogs/panel_sym_lib_table.cpp:1208
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1742
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1794
#: eeschema/tools/sch_editor_control.cpp:484
#: eeschema/tools/sch_editor_control.cpp:499
#: pcbnew/dialogs/panel_fp_lib_table.cpp:1228
#: pcbnew/dialogs/panel_fp_lib_table.cpp:1241
msgid "File Save Error"
msgstr "파일 저장 오류"

#: eeschema/dialogs/panel_sym_lib_table.cpp:1207
#: eeschema/tools/sch_editor_control.cpp:498
#: pcbnew/dialogs/panel_fp_lib_table.cpp:1240
#, c-format
msgid ""
"Error saving project-specific library table:\n"
"\n"
"%s"
msgstr ""
"프로젝트별 라이브러리 테이블을 저장하는 중 오류 발생:\n"
"\n"
"%s"

#: eeschema/dialogs/panel_sym_lib_table_base.cpp:46
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:96
#: eeschema/symbol_editor/symbol_editor.cpp:578 include/lib_table_grid.h:190
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:46
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:95
#: pcbnew/footprint_libraries_utils.cpp:973
#: pcbnew/footprint_libraries_utils.cpp:1353
msgid "Nickname"
msgstr "별칭"

#: eeschema/dialogs/panel_sym_lib_table_base.cpp:47
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:97
#: include/lib_table_grid.h:191 pcbnew/dialogs/panel_fp_lib_table_base.cpp:47
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:96
msgid "Library Path"
msgstr "라이브러리 경로"

#: eeschema/dialogs/panel_sym_lib_table_base.cpp:48
#: eeschema/dialogs/panel_sym_lib_table_base.cpp:98
#: include/lib_table_grid.h:194 pcbnew/dialogs/panel_fp_lib_table_base.cpp:48
msgid "Library Format"
msgstr "라이브러리 형식"

#: eeschema/dialogs/panel_sym_lib_table_base.cpp:70
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:69
msgid "Global Libraries"
msgstr "전역 라이브러리"

#: eeschema/dialogs/panel_sym_lib_table_base.cpp:121
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:118
msgid "Project Specific Libraries"
msgstr "프로젝트별 라이브러리"

#: eeschema/dialogs/panel_sym_lib_table_base.cpp:129
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:126
msgid "Add empty row to table"
msgstr "테이블에 빈 행 추가"

#: eeschema/dialogs/panel_sym_lib_table_base.cpp:134
msgid "Add existing library to table"
msgstr "기존 라이브러리를 테이블에 추가"

#: eeschema/dialogs/panel_sym_lib_table_base.cpp:152
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:149
msgid "Remove library from table"
msgstr "테이블에서 라이브러리 제거"

#: eeschema/dialogs/panel_sym_lib_table_base.cpp:159
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:156
msgid "Migrate Libraries"
msgstr "라이브러리 이주"

#: eeschema/dialogs/panel_sym_lib_table_base.cpp:203
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:197
msgid "This is a read-only table which shows pertinent environment variables."
msgstr "관련 환경변수를 보여주는 읽기 전용 테이블입니다."

#: eeschema/dialogs/panel_template_fieldnames.cpp:41
msgid "Project field name templates:"
msgstr "프로젝트 필드 이름 템플릿:"

#: eeschema/dialogs/panel_template_fieldnames.cpp:47
msgid "Global field name templates:"
msgstr "전역 필드 이름 템플릿:"

#: eeschema/dialogs/panel_template_fieldnames.cpp:95
msgid "Untitled Field"
msgstr "제목 없는 필드"

#: eeschema/dialogs/panel_template_fieldnames_base.cpp:20
msgid "Field name templates:"
msgstr "필드 이름 템플릿:"

#: eeschema/dialogs/panel_template_fieldnames_base.cpp:44
#: kicad/pcm/dialogs/dialog_manage_repositories_base.cpp:40
msgid "URL"
msgstr "URL"

#: eeschema/eeschema.cpp:454
msgid ""
"An error occurred attempting to load the global symbol library table.\n"
"Please edit this global symbol library table in Preferences menu."
msgstr ""
"전역 기호 라이브러리 테이블을 불러오는 중에 오류가 발생하였습니다.\n"
"설정 메뉴에서 이 전역 심볼 라이브러리 테이블을 편집하세요."

#: eeschema/eeschema.cpp:514
#, c-format
msgid ""
"Cannot copy file '%s' as it will be overwritten by the new root sheet file."
msgstr "'%s' 파일은 새 루트 시트 파일로 덮어쓰므로 복사할 수 없습니다."

#: eeschema/eeschema_config.cpp:74 pcbnew/pcbnew_config.cpp:55
#: pcbnew/python/scripting/pcbnew_scripting_helpers.cpp:188
msgid "Error loading drawing sheet."
msgstr "도면 시트를 불러오는 중에 오류가 발생했습니다."

#: eeschema/eeschema_jobs_handler.cpp:115
#: pagelayout_editor/pl_editor_frame.cpp:346
#: pcbnew/pcbnew_jobs_handler.cpp:1242
#, c-format
msgid "Error loading drawing sheet '%s'."
msgstr "도면 시트 '%s'을(를) 불러오는 중에 오류가 발생했습니다."

#: eeschema/eeschema_jobs_handler.cpp:146
#: eeschema/eeschema_jobs_handler.cpp:245
#: eeschema/eeschema_jobs_handler.cpp:350
#: eeschema/eeschema_jobs_handler.cpp:609
#: eeschema/eeschema_jobs_handler.cpp:949
msgid "Failed to load schematic file\n"
msgstr "회로도 파일을 로드하지 못했습니다.\n"

#: eeschema/eeschema_jobs_handler.cpp:262
#: eeschema/eeschema_jobs_handler.cpp:373
#: eeschema/eeschema_jobs_handler.cpp:627
msgid ""
"Warning: schematic has annotation errors, please use the schematic editor to "
"fix them\n"
msgstr ""
"경고: 회로도에 주석 오류가 있으므로 회로도 편집기를 사용하여 수정하시오\n"

#: eeschema/eeschema_jobs_handler.cpp:273
#: eeschema/eeschema_jobs_handler.cpp:384
#: eeschema/eeschema_jobs_handler.cpp:637
msgid "Warning: duplicate sheet names.\n"
msgstr "경고: 시트 이름이 중복되었습니다.\n"

#: eeschema/eeschema_jobs_handler.cpp:315
msgid "Unknown netlist format.\n"
msgstr "알 수 없는 네트리스트 형식.\n"

#: eeschema/eeschema_jobs_handler.cpp:441
#, c-format
msgid "BOM preset '%s' not found"
msgstr "BOM 사전 설정 '%s'를 찾을 수 없음"

#: eeschema/eeschema_jobs_handler.cpp:536
#: eeschema/eeschema_jobs_handler.cpp:764
#, c-format
msgid "Unable to open destination '%s'"
msgstr "대상 '%s'을(를) 열 수 없음"

#: eeschema/eeschema_jobs_handler.cpp:568
#, c-format
msgid "BOM format preset '%s' not found"
msgstr "BOM 형식 사전 설정 '%s'를 찾을 수 없음"

#: eeschema/eeschema_jobs_handler.cpp:727
#, c-format
msgid "Plotting symbol '%s' unit %d to '%s'\n"
msgstr "플로팅 심볼 '%s' 단위 %d ~ '%s'\n"

#: eeschema/eeschema_jobs_handler.cpp:737
#, c-format
msgid "Plotting symbol '%s' to '%s'\n"
msgstr "'%s'을(를) '%s'로 심볼 작성\n"

#: eeschema/eeschema_jobs_handler.cpp:819
#: eeschema/eeschema_jobs_handler.cpp:890 pcbnew/pcbnew_jobs_handler.cpp:793
#: pcbnew/pcbnew_jobs_handler.cpp:854
msgid "Unable to load library\n"
msgstr "라이브러리를 로드할 수 없습니다.\n"

#: eeschema/eeschema_jobs_handler.cpp:832
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:152
msgid "There is no symbol selected to save."
msgstr "저장하기 위해 선택한 심볼이 없습니다."

#: eeschema/eeschema_jobs_handler.cpp:898 pcbnew/pcbnew_jobs_handler.cpp:778
msgid "Output path must not conflict with existing path\n"
msgstr "출력 경로는 기존 경로와 충돌하지 않아야 합니다\n"

#: eeschema/eeschema_jobs_handler.cpp:910
msgid "Saving symbol library in updated format\n"
msgstr "심볼 라이브러리를 업데이트된 형식으로 저장\n"

#: eeschema/eeschema_jobs_handler.cpp:930
msgid "Symbol library was not updated\n"
msgstr "심볼 라이브러리가 업데이트되지 않음\n"

#: eeschema/eeschema_jobs_handler.cpp:988
msgid "Running ERC...\n"
msgstr "ERC 실행...\n"

#: eeschema/eeschema_jobs_handler.cpp:997 pcbnew/pcbnew_jobs_handler.cpp:1082
#, c-format
msgid "Found %d violations\n"
msgstr "%d 개의 위반 발견\n"

#: eeschema/eeschema_jobs_handler.cpp:1012
#, c-format
msgid "Unable to save ERC report to %s\n"
msgstr "ERC 보고서를 %s에 저장할 수 없음\n"

#: eeschema/eeschema_jobs_handler.cpp:1017
#, c-format
msgid "Saved ERC Report to %s\n"
msgstr "ERC 보고서를 %s에 저장함.\n"

#: eeschema/eeschema_settings.cpp:70
msgid "Net Navigator"
msgstr "네트 탐색기"

#: eeschema/erc.cpp:73 eeschema/erc.cpp:90
msgid "Input Pin"
msgstr "입력 핀"

#: eeschema/erc.cpp:74 eeschema/erc.cpp:91
msgid "Output Pin"
msgstr "출력 핀"

#: eeschema/erc.cpp:75 eeschema/erc.cpp:92
msgid "Bidirectional Pin"
msgstr "양방향 핀"

#: eeschema/erc.cpp:76 eeschema/erc.cpp:93
msgid "Tri-State Pin"
msgstr "3상태 핀"

#: eeschema/erc.cpp:77 eeschema/erc.cpp:94
msgid "Passive Pin"
msgstr "수동 핀"

#: eeschema/erc.cpp:78 eeschema/erc.cpp:95
msgid "Free Pin"
msgstr "핀 해제"

#: eeschema/erc.cpp:79 eeschema/erc.cpp:96
msgid "Unspecified Pin"
msgstr "지정되지 않은 핀"

#: eeschema/erc.cpp:80 eeschema/erc.cpp:97
msgid "Power Input Pin"
msgstr "전원 입력 핀"

#: eeschema/erc.cpp:81 eeschema/erc.cpp:98
msgid "Power Output Pin"
msgstr "전원 출력 핀"

#: eeschema/erc.cpp:82 eeschema/erc.cpp:99
msgid "Open Collector"
msgstr "오픈 컬렉터"

#: eeschema/erc.cpp:83 eeschema/erc.cpp:100
msgid "Open Emitter"
msgstr "오픈 이미터"

#: eeschema/erc.cpp:84 eeschema/erc.cpp:101
msgid "No Connection"
msgstr "연결 없음"

#: eeschema/erc.cpp:289
msgid "Unresolved text variable in drawing sheet"
msgstr "도면 시트의 확인되지 않은 텍스트 변수"

#: eeschema/erc.cpp:325
#, c-format
msgid "Bus alias %s has conflicting definitions on %s and %s"
msgstr "버스 별칭 %s에서 %s와 %s의 정의가 충돌합니다"

#: eeschema/erc.cpp:394
#, c-format
msgid "Different footprints assigned to %s and %s"
msgstr "%s와 %s에 다른 풋프린트가 할당되었음"

#: eeschema/erc.cpp:485
#, c-format
msgid "Symbol %s has unplaced units %s"
msgstr "심볼 %s에 배치되지 않은 유닛 %s가 있음"

#: eeschema/erc.cpp:534
#, c-format
msgid "Symbol %s has input power pins in units %s that are not placed."
msgstr "심볼 %s에는 배치되지 않은 장치 %s에 입력 전원 핀이 있습니다."

#: eeschema/erc.cpp:541
#, c-format
msgid "Symbol %s has input pins in units %s that are not placed."
msgstr "심볼 %s에는 배치되지 않은 장치 %s에 입력 핀이 있습니다."

#: eeschema/erc.cpp:548
#, c-format
msgid "Symbol %s has bidirectional pins in units %s that are not placed."
msgstr "심볼 %s에는 배치되지 않은 장치 %s에 양방향 핀이 있습니다."

#: eeschema/erc.cpp:571
#, c-format
msgid "Netclass %s is not defined"
msgstr "네트클래스 %s가 정의되지 않았음"

#: eeschema/erc.cpp:663
msgid "Pin with 'no connection' type is connected"
msgstr "'연결 없음' 유형의 핀이 연결됨"

#: eeschema/erc.cpp:776
#, c-format
msgid "Pins of type %s and %s are connected"
msgstr "%s 및 %s 유형의 핀이 연결됨"

#: eeschema/erc.cpp:849
#, c-format
msgid "Pin %s is connected to both %s and %s"
msgstr "핀 %s이(가) %s 및 %s에 모두 연결됨"

#: eeschema/erc.cpp:961
#, c-format
msgid "The current configuration does not include the library '%s'"
msgstr "현재 구성에 '%s' 라이브러리가 포함되어 있지 않음"

#: eeschema/erc.cpp:972
#, c-format
msgid "The library '%s' is not enabled in the current configuration"
msgstr "라이브러리 '%s'는 현재 구성에서 사용할 수 없음"

#: eeschema/erc.cpp:987
#, c-format
msgid "Symbol '%s' not found in symbol library '%s'"
msgstr "심볼 %s를 라이브러리 '%s'에서 찾을 수 없음"

#: eeschema/erc.cpp:1003
#, c-format
msgid "Symbol '%s' has been modified in library '%s'"
msgstr "심볼 %s이(가) 라이브러리 '%s'에서 수정되었음"

#: eeschema/erc.cpp:1149
msgid "Checking sheet names..."
msgstr "시트 이름 확인..."

#: eeschema/erc.cpp:1157
msgid "Checking bus conflicts..."
msgstr "버스 충돌 확인..."

#: eeschema/erc.cpp:1164
msgid "Checking conflicts..."
msgstr "충돌 확인..."

#: eeschema/erc.cpp:1178
msgid "Checking units..."
msgstr "단위 확인 중..."

#: eeschema/erc.cpp:1184 pcbnew/drc/drc_test_provider_footprint_checks.cpp:69
msgid "Checking footprints..."
msgstr "풋프린트 확인..."

#: eeschema/erc.cpp:1198
msgid "Checking pins..."
msgstr "핀 확인..."

#: eeschema/erc.cpp:1216
msgid "Checking labels..."
msgstr "라벨 확인..."

#: eeschema/erc.cpp:1224
msgid "Checking for unresolved variables..."
msgstr "미확인 변수 확인 중..."

#: eeschema/erc.cpp:1232
msgid "Checking SPICE models..."
msgstr "SPICE 모델 확인 중..."

#: eeschema/erc.cpp:1240
msgid "Checking no connect pins for connections..."
msgstr "연결 핀을 연결하지 않는 경우 확인..."

#: eeschema/erc.cpp:1248
msgid "Checking for library symbol issues..."
msgstr "라이브러리 심볼 문제 확인 중..."

#: eeschema/erc.cpp:1256
msgid "Checking for off grid pins and wires..."
msgstr "오프 그리드 핀 및 와이어 확인 중..."

#: eeschema/erc.cpp:1264
msgid "Checking for undefined netclasses..."
msgstr "정의되지 않은 네트클래스 확인 중..."

#: eeschema/erc_item.cpp:43
msgid "Conflicts"
msgstr "충돌"

#: eeschema/erc_item.cpp:44 pcbnew/dialogs/panel_edit_options_base.cpp:366
#: pcbnew/drc/drc_item.cpp:50
msgid "Miscellaneous"
msgstr "기타"

#: eeschema/erc_item.cpp:47
msgid "Duplicate sheet names within a given sheet"
msgstr "지정된 시트 내에서 시트 이름 복제"

#: eeschema/erc_item.cpp:51
msgid "Symbol pin or wire end off connection grid"
msgstr "심볼 핀 또는 와이어 끝 연결 그리드 끄기"

#: eeschema/erc_item.cpp:55
msgid "Pin not connected"
msgstr "핀이 연결되지 않음"

#: eeschema/erc_item.cpp:59
msgid "Input pin not driven by any Output pins"
msgstr "입력 핀이 출력 핀에 의해 구동되지 않음"

#: eeschema/erc_item.cpp:63
msgid "Input Power pin not driven by any Output Power pins"
msgstr "입력 전력 핀이 출력 전력 핀에 의해 구동되지 않음"

#: eeschema/erc_item.cpp:67 eeschema/erc_item.cpp:71
msgid "Conflict problem between pins"
msgstr "핀 간 충돌 문제"

#: eeschema/erc_item.cpp:75
msgid "Mismatch between hierarchical labels and sheet pins"
msgstr "계층 라벨과 시트 핀 간의 불일치"

#: eeschema/erc_item.cpp:79
msgid "A pin with a \"no connection\" flag is connected"
msgstr "\"연결 없음\" 플래그가 있는 핀이 연결됨"

#: eeschema/erc_item.cpp:83
msgid "Unconnected \"no connection\" flag"
msgstr "연결되지 않은 \"연결 없음\" 플래그"

#: eeschema/erc_item.cpp:87
msgid "Label not connected to anything"
msgstr "아무것도 연결되지 않은 라벨"

#: eeschema/erc_item.cpp:91
msgid "Global label not connected anywhere else in the schematic"
msgstr "회로도의 다른 곳에서는 연결되지 않은 전역 라벨"

#: eeschema/erc_item.cpp:95
msgid "Labels are similar (lower/upper case difference only)"
msgstr "라벨이 비슷함 (소문자/대문자만 다름)"

#: eeschema/erc_item.cpp:99
msgid "Different footprint assigned in another unit of the symbol"
msgstr "심볼의 다른 유닛에 다른 풋프린트가 할당됨"

#: eeschema/erc_item.cpp:103
msgid "Different net assigned to a shared pin in another unit of the symbol"
msgstr "서로 다른 네트가 심볼의 또다른 유닛에 있는 공유 핀에 할당됨"

#: eeschema/erc_item.cpp:107
msgid "Conflict between bus alias definitions across schematic sheets"
msgstr "호로도 시트의 버스 별칭 정의 간 충돌"

#: eeschema/erc_item.cpp:111
msgid "More than one name given to this bus or net"
msgstr "버스 또는 네트에 둘 이상의 이름이 지정됨"

#: eeschema/erc_item.cpp:115
msgid "Conflicting netclass assignments"
msgstr "충돌하는 네트클래스 할당"

#: eeschema/erc_item.cpp:119
msgid "Net is graphically connected to a bus but not a bus member"
msgstr ""
"네트는 버스에 그래픽적으로 연결되어 있지만 버스 구성원은 연결되어 있지 않습니"
"다"

#: eeschema/erc_item.cpp:123
msgid "Label attached to bus item does not describe a bus"
msgstr "버스 항목에 부착된 라벨이 버스를 설명하지 않습니다"

#: eeschema/erc_item.cpp:127
msgid "Buses are graphically connected but share no bus members"
msgstr "버스는 그래픽으로 연결돼 있지만 버스 멤버를 공유하지 않음"

#: eeschema/erc_item.cpp:131
msgid "Invalid connection between bus and net items"
msgstr "잘못된 버스와 네트 항목 간의 연결"

#: eeschema/erc_item.cpp:135 pcbnew/drc/drc_item.cpp:197
msgid "Unresolved text variable"
msgstr "미확인 텍스트 변수"

#: eeschema/erc_item.cpp:139
msgid "Undefined netclass"
msgstr "미정의 네트 클래스"

#: eeschema/erc_item.cpp:143
msgid "SPICE model issue"
msgstr "SPICE 모델 문제"

#: eeschema/erc_item.cpp:147
msgid "Wires not connected to anything"
msgstr "아무것도 연결되지 않은 전선"

#: eeschema/erc_item.cpp:151
msgid "Library symbol issue"
msgstr "라이브러리 심볼 문제"

#: eeschema/erc_item.cpp:155
msgid "Symbol is not annotated"
msgstr "심볼이 주석 처리되지 않음"

#: eeschema/erc_item.cpp:159
msgid "Symbol has more units than are defined"
msgstr "심볼에 정의된 것보다 더 많은 유닛이 있음"

#: eeschema/erc_item.cpp:163
msgid "Symbol has units that are not placed"
msgstr "심볼에 배치되지 않은 장치가 있음"

#: eeschema/erc_item.cpp:167
msgid "Symbol has input pins that are not placed"
msgstr "심볼에 배치되지 않은 입력 핀이 있음"

#: eeschema/erc_item.cpp:171
msgid "Symbol has bidirectional pins that are not placed"
msgstr "심볼에 배치되지 않은 양방향 핀이 있음"

#: eeschema/erc_item.cpp:175
msgid "Symbol has power input pins that are not placed"
msgstr "심볼에 배치되지 않은 전원 입력 핀이 있음"

#: eeschema/erc_item.cpp:179
msgid "Units of same symbol have different values"
msgstr "동일한 심볼의 유닛이 다른 값을 가짐"

#: eeschema/erc_item.cpp:183
msgid "Duplicate reference designators"
msgstr "중복 참조 지정자"

#: eeschema/erc_item.cpp:187
msgid "Bus Entry needed"
msgstr "버스 항목 필요"

#: eeschema/erc_report.cpp:48
#, c-format
msgid "ERC report (%s, Encoding UTF8)\n"
msgstr "ERC 보고 (%s, UTF8 인코딩)\n"

#: eeschema/erc_report.cpp:64
#, c-format
msgid ""
"\n"
"***** Sheet %s\n"
msgstr ""
"\n"
"***** 시트 %s\n"

#: eeschema/erc_report.cpp:88
#, c-format
msgid ""
"\n"
" ** ERC messages: %d  Errors %d  Warnings %d\n"
msgstr ""
"\n"
" ** ERC 메시지: %d 오류 %d 경고 %d\n"

#: eeschema/fields_grid_table.cpp:226 eeschema/files-io.cpp:950
#: eeschema/tools/sch_editor_control.cpp:115
msgid "Schematic Files"
msgstr "회로도 파일"

#: eeschema/fields_grid_table.cpp:257 eeschema/fields_grid_table.cpp:615
#: eeschema/fields_grid_table.cpp:785
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:129
msgid "Horizontal"
msgstr "수평"

#: eeschema/fields_grid_table.cpp:258 eeschema/fields_grid_table.cpp:617
#: eeschema/fields_grid_table.cpp:787
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:129
msgid "Vertical"
msgstr "세로쓰기"

#: eeschema/fields_grid_table.cpp:357 eeschema/lib_field.cpp:657
#: eeschema/sch_field.cpp:1394
msgid "Allow Autoplacement"
msgstr "자동 배치 허용"

#: eeschema/files-io.cpp:110
#, c-format
msgid "Schematic '%s' is already open by '%s' at '%s'."
msgstr "회로도 '%s'는 이미 '%s'에 의해 '%s'에서 열려 있습니다."

#: eeschema/files-io.cpp:135
#, c-format
msgid "Schematic '%s' does not exist.  Do you wish to create it?"
msgstr "회로도 '%s'이(가) 존재하지 않습니다. 생성하시겠습니까?"

#: eeschema/files-io.cpp:156
msgid "Creating Schematic"
msgstr "회로도 생성"

#: eeschema/files-io.cpp:157
msgid "Loading Schematic"
msgstr "회로도 불러오는 중"

#: eeschema/files-io.cpp:217
msgid "Schematic file changes are unsaved"
msgstr "회로도 파일 변경 내용이 저장되지 않음"

#: eeschema/files-io.cpp:232
#, c-format
msgid "Unsupported schematic file '%s'."
msgstr "지원되지 않는 회로도 파일 '%s'."

#: eeschema/files-io.cpp:269
msgid "Root"
msgstr "루트"

#: eeschema/files-io.cpp:274
msgid ""
"The entire schematic could not be loaded.  Errors occurred attempting to "
"load hierarchical sheets."
msgstr ""
"전체 회로도를 불러올 수 없습니다. 계층 시트를 불러오는 동안 오류가 발생했습니"
"다."

#: eeschema/files-io.cpp:281 eeschema/files-io.cpp:289
#: eeschema/files-io.cpp:1434 eeschema/sheet.cpp:225
#, c-format
msgid "Error loading schematic '%s'."
msgstr "회로도 '%s'을(를) 불러오는 중에 오류가 발생했습니다."

#: eeschema/files-io.cpp:297
#, c-format
msgid "Memory exhausted loading schematic '%s'."
msgstr "회로도 '%s' 불러오는 중에 메모리가 부족합니다."

#: eeschema/files-io.cpp:316 eeschema/files-io.cpp:1437
#: eeschema/files-io.cpp:1449 eeschema/sheet.cpp:228
#, c-format
msgid "Failed to load '%s'."
msgstr "'%s'을(를) 불러오기 실패하였습니다."

#: eeschema/files-io.cpp:329
msgid ""
"An error was found when loading the schematic that has been automatically "
"fixed.  Please save the schematic to repair the broken file or it may not be "
"usable with other versions of KiCad."
msgstr ""
"자동으로 수정된 도식을 불러오는 중에 오류가 발생했습니다. 손상된 파일을 복구"
"하기 위해 도식을 저장해 두지 않으면 다른 버전의 KiCad에서 호환되지 않을 수 있"
"습니다."

#: eeschema/files-io.cpp:393
msgid "Illegal entry found in project file symbol library list."
msgstr "프로젝트 파일 심볼 라이브러리 목록에 잘못된 항목이 있습니다."

#: eeschema/files-io.cpp:394
msgid "Project Load Warning"
msgstr "프로젝트 불러오기 경고"

#: eeschema/files-io.cpp:397
msgid ""
"Symbol libraries defined in the project file symbol library list are no "
"longer supported and will be removed.\n"
"\n"
"This may cause broken symbol library links under certain conditions."
msgstr ""
"프로젝트 파일 심볼 라이브러리 목록에 정의된 심볼 라이브러리는 더 이상 지원되"
"지 않으며 제거됩니다.\n"
"\n"
"이로 인해 특정 조건에서 심볼 라이브러리 연결이 끊어질 수 있습니다."

#: eeschema/files-io.cpp:401
msgid "Do not show this dialog again."
msgstr "이 대화 상자를 다시 표시하지 마십시오."

#: eeschema/files-io.cpp:430
#, c-format
msgid "The project symbol library cache file '%s' was not found."
msgstr "프로젝트 심볼 라이브러리 캐시 파일 '%s'을(를) 찾을 수 없습니다."

#: eeschema/files-io.cpp:432
msgid ""
"This can result in a broken schematic under certain conditions.  If the "
"schematic does not have any missing symbols upon opening, save it "
"immediately before making any changes to prevent data loss.  If there are "
"missing symbols, either manual recovery of the schematic or recovery of the "
"symbol cache library file and reloading the schematic is required."
msgstr ""
"이로 인해 특정 조건에서 회로도가 손상될 수 있습니다. 회로도를 열었을 때 누락"
"된 심볼이 없을 경우, 데이터 손실을 방지하기 위해 수정 전 즉시 저장하십시오.  "
"누락된 심볼이 있을 경우, 수동으로 회로도를 복구하거나 심볼 캐시 라이브러리 파"
"일을 복구한 후 회로도를 다시 불러올 필요가 있습니다."

#: eeschema/files-io.cpp:443
msgid "Load Without Cache File"
msgstr "캐시 파일 없이 불러오기"

#: eeschema/files-io.cpp:444
msgid "Abort"
msgstr "중단"

#: eeschema/files-io.cpp:459 eeschema/files-io.cpp:479
#: pagelayout_editor/files.cpp:259 pcbnew/files.cpp:786
msgid ""
"This file was created by an older version of KiCad. It will be converted to "
"the new format when saved."
msgstr ""
"이 파일은 이전 버전의 KiCad에서 만들었습니다. 저장 시 새 형식으로 변환됩니다."

#: eeschema/files-io.cpp:582
msgid "Schematic is read only."
msgstr "회로도는 읽기 전용입니다."

#: eeschema/files-io.cpp:610
msgid "Insert Schematic"
msgstr "회로도 삽입"

#: eeschema/files-io.cpp:660
#, fuzzy
msgid "Import Schematic Sheet Content..."
msgstr "회로도 시트 컨텐츠 삽입..."

#: eeschema/files-io.cpp:672
msgid ""
"This operation cannot be undone.\n"
"\n"
"Do you want to save the current document before proceeding?"
msgstr ""
"이 작업을 취소할 수 없습니다.\n"
"\n"
"진행하기 전에 현재 문서를 저장하시겠습니까?"

#: eeschema/files-io.cpp:687
msgid ""
"This operation replaces the contents of the current schematic, which will be "
"permanently lost.\n"
"\n"
"Do you want to proceed?"
msgstr ""
"이 작업은 현재 회로도의 내용을 대체하며, 이 내용은 영구적으로 손실됩니다.\n"
"\n"
"계속 진행할까요?"

#: eeschema/files-io.cpp:729
msgid "Import Schematic"
msgstr "회로도로 가져오기"

#: eeschema/files-io.cpp:776
#, c-format
msgid "No loader can read the specified file: '%s'."
msgstr "지정한 파일을 읽을 수 있는 로더가 없음: '%s'."

#: eeschema/files-io.cpp:844
#, c-format
msgid ""
"Error saving schematic file '%s'.\n"
"%s"
msgstr ""
"'%s'회로도 파일 저장 중 오류 발생.\n"
"%s"

#: eeschema/files-io.cpp:849 pcbnew/files.cpp:1011 pcbnew/files.cpp:1292
#, c-format
msgid "Failed to create temporary file '%s'."
msgstr "임시 파일 '%s'을(를) 만들지 못했습니다."

#: eeschema/files-io.cpp:869
#, c-format
msgid ""
"Error saving schematic file '%s'.\n"
"Failed to rename temporary file '%s'."
msgstr ""
"회로도 파일 '%s'을(를) 저장하는 중 오류 발생.\n"
"임시 파일 '%s'의 이름을 바꾸지 못함."

#: eeschema/files-io.cpp:875 pcbnew/files.cpp:1032 pcbnew/files.cpp:1358
#, c-format
msgid "Failed to rename temporary file '%s'."
msgstr "임시 파일 '%s'의 이름을 변경하지 못했습니다."

#: eeschema/files-io.cpp:898 pagelayout_editor/files.cpp:187
#: pagelayout_editor/files.cpp:219 pcbnew/files.cpp:1065
#, c-format
msgid "File '%s' saved."
msgstr "파일 '%s'이(가) 저장됨."

#: eeschema/files-io.cpp:903
msgid "File write operation failed."
msgstr "파일 쓰기 작업 실패함."

#: eeschema/files-io.cpp:970 eeschema/files-io.cpp:1038
#: kicad/import_project.cpp:92 kicad/tools/kicad_manager_control.cpp:112
#: kicad/tools/kicad_manager_control.cpp:286
#, c-format
msgid ""
"Folder '%s' could not be created.\n"
"\n"
"Make sure you have write permissions and try again."
msgstr ""
"폴더 '%s'을(를) 만들 수 없습니다.\n"
"\n"
"쓰기 권한이 있는지 확인하고 다시 시도하십시오."

#: eeschema/files-io.cpp:1120
#, c-format
msgid "Failed to save %s."
msgstr "%s을(를) 저장하지 못했습니다."

#: eeschema/files-io.cpp:1122
msgid "Locked File Warning"
msgstr "잠긴 파일 경고"

#: eeschema/files-io.cpp:1124
msgid ""
"You do not have write permissions to:\n"
"\n"
msgstr ""
"다음에 대한 쓰기 권한이 없음:\n"
"\n"

#: eeschema/files-io.cpp:1140
msgid "Saving will overwrite existing files."
msgstr "저장하면 기존 파일을 덮어씁니다."

#: eeschema/files-io.cpp:1141
msgid "Save Warning"
msgstr "경고 저장"

#: eeschema/files-io.cpp:1144
msgid ""
"The following files will be overwritten:\n"
"\n"
msgstr ""
"다음 파일을 덮어씁니다:\n"
"\n"

#: eeschema/files-io.cpp:1145
msgid "Overwrite Files"
msgstr "파일 덮어쓰기"

#: eeschema/files-io.cpp:1146
msgid "Abort Project Save"
msgstr "프로젝트 저장 중단"

#: eeschema/files-io.cpp:1373
msgid "Importing Schematic"
msgstr "회로도 가져오기"

#: eeschema/files-io.cpp:1445
#, c-format
msgid "Unhandled exception occurred loading schematic '%s'."
msgstr "회로도 '%s'를 로드하는 동안 처리되지 않은 예외가 발생했습니다."

#: eeschema/files-io.cpp:1506
msgid "The current schematic has been modified.  Save changes?"
msgstr "현재 회로도가 수정됨.\t변경 사항을 저장할까요?"

#: eeschema/files-io.cpp:1604
msgid ""
"Well this is potentially embarrassing!\n"
"It appears that the last time you were editing one or more of the schematic "
"files\n"
"were not saved properly.  Do you wish to restore the last saved edits you "
"made?"
msgstr ""
"정말 난감한 상황입니다!\n"
"최근에 하나 이상의 회로도 파일을 편집할 때 제대로 저장되지 않은 것 같습니"
"다.\n"
"마지막에 저장한 편집 내용을 복원하시겠습니까?"

#: eeschema/files-io.cpp:1615
#, c-format
msgid ""
"The file '%s' could not be opened.\n"
"Manual recovery of automatically saved files is required."
msgstr ""
"'%s' 파일을 열 수 없습니다.\n"
"자동으로 저장된 파일을 수동으로 복구해야 합니다."

#: eeschema/files-io.cpp:1665
msgid "The following automatically saved file(s) could not be restored\n"
msgstr "다음 자동 저장 파일을 복원할 수 없습니다\n"

#: eeschema/files-io.cpp:1670
msgid "Manual recovery will be required to restore the file(s) above."
msgstr "위의 파일을 복원하려면 수동 복구가 필요합니다."

#: eeschema/files-io.cpp:1680
#, c-format
msgid ""
"The autosave file '%s' could not be removed.\n"
"Manual removal will be required."
msgstr ""
"자동 저장 파일 '%s'을(를) 제거할 수 없습니다.\n"
"수동으로 제거해야 합니다."

#: eeschema/files-io.cpp:1714
msgid "The following automatically saved file(s) could not be removed\n"
msgstr "다음 자동 저장 파일을 제거할 수 없습니다\n"

#: eeschema/files-io.cpp:1719
msgid "Manual removal will be required for the file(s) above."
msgstr "위의 파일을 수동으로 제거해야 합니다."

#: eeschema/generate_alias_info.cpp:37 eeschema/sch_symbol.cpp:1927
msgid "Derived from"
msgstr "파생 위치"

#: eeschema/generate_alias_info.cpp:81 eeschema/sch_base_frame.cpp:79
#: eeschema/symbol_editor/symbol_editor.cpp:168
#: eeschema/symbol_editor/symbol_editor.cpp:234
#: eeschema/symbol_library_manager.cpp:447
#: eeschema/widgets/panel_symbol_chooser.cpp:539
#: eeschema/widgets/panel_symbol_chooser.cpp:598
#: eeschema/widgets/symbol_preview_widget.cpp:201
#, c-format
msgid "Error loading symbol %s from library '%s'."
msgstr "심볼 %s을(를) 불러오는 중 라이브러리 '%s'에서 오류 발생."

#: eeschema/generate_alias_info.cpp:121 eeschema/sim/spice_simulator.cpp:69
#: kicad/pcm/pcm.cpp:779 pcbnew/zone.cpp:631
msgid "Unknown"
msgstr "알 수 없음"

#: eeschema/import_gfx/dialog_import_gfx_sch.cpp:61
#: pcbnew/import_gfx/dialog_import_graphics.cpp:56
msgid "Centimeter"
msgstr "센티미터"

#: eeschema/import_gfx/dialog_import_gfx_sch.cpp:62
#: pcbnew/import_gfx/dialog_import_graphics.cpp:57
msgid "Feet"
msgstr "피트"

#: eeschema/import_gfx/dialog_import_gfx_sch.cpp:202
#: pcbnew/import_gfx/dialog_import_graphics.cpp:215
#: pcbnew/tools/drawing_tool.cpp:1576 pcbnew/tools/drawing_tool.cpp:1665
msgid "Import Graphics"
msgstr "그래픽 불러오기"

#: eeschema/import_gfx/dialog_import_gfx_sch.cpp:217
msgid "No file selected!"
msgstr "선택된 파일 없음!"

#: eeschema/import_gfx/dialog_import_gfx_sch.cpp:265
#: pcbnew/import_gfx/dialog_import_graphics.cpp:295
msgid "Items in the imported file could not be handled properly."
msgstr "불러온 파일에 있는 항목을 제대로 처리할 수 없습니다."

#: eeschema/import_gfx/dialog_import_gfx_sch.cpp:275
#: pcbnew/import_gfx/dialog_import_graphics.cpp:305
msgid "There is no plugin to handle this file type."
msgstr "이 파일 형식을 처리할 플러그인이 없습니다."

#: eeschema/import_gfx/dialog_import_gfx_sch_base.cpp:26
#: eeschema/import_gfx/dialog_import_gfx_sch_base.cpp:31
#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:27
#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:32
msgid "Only vectors will be imported.  Bitmaps and fonts will be ignored."
msgstr "벡터만 불러오기가 가능합니다.  비트맵과 서체는 무시됩니다."

#: eeschema/import_gfx/dialog_import_gfx_sch_base.cpp:43
msgid "Placement"
msgstr "배치"

#: eeschema/import_gfx/dialog_import_gfx_sch_base.cpp:48
msgid "Interactive placement"
msgstr "대화형 배치"

#: eeschema/import_gfx/dialog_import_gfx_sch_base.cpp:55
msgid "At"
msgstr "At"

#: eeschema/import_gfx/dialog_import_gfx_sch_base.cpp:74
#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:115
msgid "DXF origin on PCB Grid, X Coordinate"
msgstr "PCB 그리드에서의 DXF 원점, X 좌표"

#: eeschema/import_gfx/dialog_import_gfx_sch_base.cpp:95
#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:132
msgid "DXF origin on PCB Grid, Y Coordinate"
msgstr "PCB 그리드에서의 DXF 원점, Y 좌표"

#: eeschema/import_gfx/dialog_import_gfx_sch_base.cpp:116
msgid "Import Parameters"
msgstr "매개변수 불러오기"

#: eeschema/import_gfx/dialog_import_gfx_sch_base.cpp:127
#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:49
msgid "Import scale:"
msgstr "스케일 불러오기:"

#: eeschema/import_gfx/dialog_import_gfx_sch_base.cpp:147
msgid "DXF Parameters"
msgstr "DXF 매개변수"

#: eeschema/import_gfx/dialog_import_gfx_sch_base.cpp:169
msgid "Default units:"
msgstr "기본 단위:"

#: eeschema/import_gfx/dialog_import_gfx_sch_base.h:77
#: pcbnew/import_gfx/dialog_import_graphics_base.h:85
msgid "Import Vector Graphics File"
msgstr "벡터 그래픽 파일 불러오기"

#: eeschema/lib_field.cpp:563 eeschema/lib_text.cpp:430
#: eeschema/sch_field.cpp:927
msgid "H Justification"
msgstr "수평 위치 맞추기"

#: eeschema/lib_field.cpp:572 eeschema/lib_text.cpp:439
#: eeschema/sch_field.cpp:936
msgid "V Justification"
msgstr "수직 위치 맞추기"

#: eeschema/lib_field.cpp:654 eeschema/sch_field.cpp:1391
msgid "Show Field Name"
msgstr "필드 이름 표시"

#: eeschema/lib_item.cpp:80 eeschema/sch_pin.cpp:252
msgid "Body Style"
msgstr "본체 유형"

#: eeschema/lib_item.cpp:84
msgid "Private"
msgstr "개인"

#: eeschema/lib_pin.cpp:1206
msgid "Pos X"
msgstr "위치 X"

#: eeschema/lib_pin.cpp:1207
msgid "Pos Y"
msgstr "위치 Y"

#: eeschema/lib_pin.cpp:1210
msgid "Flags"
msgstr "플래그"

#: eeschema/lib_pin.cpp:1426
#, c-format
msgid "Pin %s [%s, %s, %s]"
msgstr "핀 %s [%s, %s, %s]"

#: eeschema/lib_pin.cpp:1434
#, c-format
msgid "Pin %s [%s, %s]"
msgstr "핀 %s [%s, %s]"

#: eeschema/lib_pin.cpp:1444
#, c-format
msgid "Hidden pin %s [%s, %s, %s]"
msgstr "숨은 핀 %s [%s, %s, %s]"

#: eeschema/lib_pin.cpp:1452
#, c-format
msgid "Hidden pin %s [%s, %s]"
msgstr "숨은 핀 %s [%s, %s]"

#: eeschema/lib_pin.cpp:1628 eeschema/pin_type.cpp:57 eeschema/pin_type.cpp:216
msgid "Free"
msgstr "자유"

#: eeschema/lib_pin.cpp:1629 eeschema/pin_type.cpp:58 eeschema/pin_type.cpp:217
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:189
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:193
msgid "Unspecified"
msgstr "지정하지 않음"

#: eeschema/lib_pin.cpp:1630 eeschema/pin_type.cpp:59 eeschema/pin_type.cpp:218
msgid "Power input"
msgstr "전원 입력"

#: eeschema/lib_pin.cpp:1631 eeschema/pin_type.cpp:60 eeschema/pin_type.cpp:219
msgid "Power output"
msgstr "전원 출력"

#: eeschema/lib_pin.cpp:1632 eeschema/pin_type.cpp:61 eeschema/pin_type.cpp:220
msgid "Open collector"
msgstr "오픈 컬렉터"

#: eeschema/lib_pin.cpp:1633 eeschema/pin_type.cpp:62 eeschema/pin_type.cpp:221
msgid "Open emitter"
msgstr "이미터 열기"

#: eeschema/lib_pin.cpp:1634 eeschema/pin_type.cpp:63 eeschema/pin_type.cpp:222
msgid "Unconnected"
msgstr "연결되지 않음"

#: eeschema/lib_pin.cpp:1642 eeschema/pin_type.cpp:80
msgid "Inverted"
msgstr "반전"

#: eeschema/lib_pin.cpp:1643 eeschema/pin_type.cpp:81
msgid "Clock"
msgstr "클럭"

#: eeschema/lib_pin.cpp:1644 eeschema/pin_type.cpp:82
msgid "Inverted clock"
msgstr "반전 클럭"

#: eeschema/lib_pin.cpp:1645 eeschema/pin_type.cpp:83
msgid "Input low"
msgstr "낮은 입력"

#: eeschema/lib_pin.cpp:1646 eeschema/pin_type.cpp:84
msgid "Clock low"
msgstr "낮은 클럭"

#: eeschema/lib_pin.cpp:1647 eeschema/pin_type.cpp:85
msgid "Output low"
msgstr "낮은 출력"

#: eeschema/lib_pin.cpp:1648 eeschema/pin_type.cpp:86
msgid "Falling edge clock"
msgstr "하강 에지 클럭"

#: eeschema/lib_pin.cpp:1649 eeschema/pin_type.cpp:87
msgid "NonLogic"
msgstr "비로직"

#: eeschema/lib_pin.cpp:1666 eeschema/sch_pin.cpp:521 pcbnew/pad.cpp:986
#: pcbnew/pad.cpp:1964
msgid "Pin Name"
msgstr "핀 이름"

#: eeschema/lib_pin.cpp:1680 eeschema/lib_shape.cpp:583
#: eeschema/sch_shape.cpp:554 eeschema/sch_symbol.cpp:2663
#: pcbnew/board_item.cpp:334 pcbnew/pcb_shape.cpp:680 pcbnew/pcb_track.cpp:1491
#: pcbnew/zone.cpp:1579 pcbnew/zone.cpp:1591
msgid "Position X"
msgstr "위치 X"

#: eeschema/lib_pin.cpp:1683 eeschema/lib_shape.cpp:585
#: eeschema/sch_shape.cpp:556 eeschema/sch_symbol.cpp:2666
#: pcbnew/board_item.cpp:337 pcbnew/pcb_shape.cpp:682 pcbnew/pcb_track.cpp:1495
#: pcbnew/zone.cpp:1585 pcbnew/zone.cpp:1592
msgid "Position Y"
msgstr "위치 Y"

#: eeschema/lib_shape.cpp:461
#, c-format
msgid "Arc with radius %s"
msgstr "반지름이 %s인 호"

#: eeschema/lib_shape.cpp:465
#, c-format
msgid "Circle with radius %s"
msgstr "반지름이 %s인 원"

#: eeschema/lib_shape.cpp:469
#, c-format
msgid "Rectangle with width %s height %s"
msgstr "너비 %s 높이 %s의 사각형"

#: eeschema/lib_shape.cpp:474
#, c-format
msgid "Polyline with %d points"
msgstr "%d 포인트가 있는 폴리라인"

#: eeschema/lib_shape.cpp:478
#, c-format
msgid "Bezier Curve with %d points"
msgstr "%d 포인트의 베지어 곡선"

#: eeschema/lib_shape.cpp:594
msgid "Body outline color"
msgstr "몸체 외곽선 색상"

#: eeschema/lib_shape.cpp:595
msgid "Body background color"
msgstr "몸체 배경색"

#: eeschema/lib_shape.cpp:596
msgid "Fill color"
msgstr "색상 채우기"

#: eeschema/lib_shape.cpp:602 pcbnew/dialogs/dialog_copper_zones_base.cpp:278
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:117
msgid "Fill"
msgstr "채우기"

#: eeschema/lib_symbol.cpp:275
msgid "Power flag differs."
msgstr "전원 플래그가 다릅니다."

#: eeschema/lib_symbol.cpp:284
msgid "Unit count differs."
msgstr "단위 수가 다릅니다."

#: eeschema/lib_symbol.cpp:324
#: pcbnew/drc/drc_test_provider_library_parity.cpp:666
msgid "Graphic item count differs."
msgstr "그래픽 항목 수가 다름."

#: eeschema/lib_symbol.cpp:336
#: pcbnew/drc/drc_test_provider_library_parity.cpp:680
#, c-format
msgid "%s differs."
msgstr "%s는 다릅니다."

#: eeschema/lib_symbol.cpp:347
msgid "Pin count differs."
msgstr "핀 수가 다릅니다."

#: eeschema/lib_symbol.cpp:363
#, c-format
msgid "Pin %s not found."
msgstr "핀 %s을(를) 찾을 수 없습니다."

#: eeschema/lib_symbol.cpp:371
#, c-format
msgid "Pin %s differs."
msgstr "핀 %s가 다름."

#: eeschema/lib_symbol.cpp:402
#, c-format
msgid "%s field differs."
msgstr "%s 필드가 다릅니다."

#: eeschema/lib_symbol.cpp:412
msgid "Field count differs."
msgstr "필드 수가 다릅니다."

#: eeschema/lib_symbol.cpp:421
msgid "Footprint filters differs."
msgstr "풋프린트 필터가 다릅니다."

#: eeschema/lib_symbol.cpp:433
msgid "Footprint filters differ."
msgstr "풋프린트 필터가 다릅니다."

#: eeschema/lib_symbol.cpp:444
msgid "Symbol keywords differ."
msgstr "심볼 키워드가 다릅니다."

#: eeschema/lib_symbol.cpp:453
msgid "Symbol pin name offsets differ."
msgstr "심볼 핀 이름 오프셋이 다릅니다."

#: eeschema/lib_symbol.cpp:464
msgid "Show pin names settings differ."
msgstr "표시 핀 이름 설정 다릅니다."

#: eeschema/lib_symbol.cpp:473
msgid "Show pin numbers settings differ."
msgstr "표시된 핀 번호 설정이 다릅니다."

#: eeschema/lib_symbol.cpp:482
msgid "Exclude from simulation settings differ."
msgstr "시뮬레이션에서 제외하는 설정이 다릅니다."

#: eeschema/lib_symbol.cpp:491
msgid "Exclude from bill of materials settings differ."
msgstr "BOM에서 제외 설정이 다릅니다."

#: eeschema/lib_symbol.cpp:500
msgid "Exclude from board settings differ."
msgstr "시뮬레이션에서 제외하는 설정이 다릅니다."

#: eeschema/lib_symbol.cpp:559 eeschema/sch_symbol.cpp:494
#: eeschema/tools/sch_edit_tool.cpp:102
#, c-format
msgid "Unit %s"
msgstr "단위 %s"

#: eeschema/lib_text.cpp:470 eeschema/sch_text.cpp:301
#, c-format
msgid "Graphic Text '%s'"
msgstr "그래픽 텍스트 '%s'"

#: eeschema/lib_textbox.cpp:376 eeschema/sch_textbox.cpp:366
msgid "Graphic Text Box"
msgstr "그래픽 텍스트 상자"

#: eeschema/lib_textbox.cpp:488 eeschema/sch_label.cpp:1202
#: eeschema/sch_text.cpp:411 eeschema/sch_textbox.cpp:452
msgid "Bold Italic"
msgstr "굵은 기울임꼴"

#: eeschema/lib_textbox.cpp:494 eeschema/sch_textbox.cpp:458
#: pcbnew/pcb_textbox.cpp:372
msgid "Box Width"
msgstr "상자 너비"

#: eeschema/lib_textbox.cpp:497 eeschema/sch_textbox.cpp:461
#: pcbnew/pcb_textbox.cpp:375
msgid "Box Height"
msgstr "상자 높이"

#: eeschema/libarch.cpp:77
#, c-format
msgid "Failed to add symbol %s to library file '%s'."
msgstr "심볼 %s을(를) 라이브러리 파일 '%s'에 추가하지 못했습니다."

#: eeschema/libarch.cpp:86
msgid "Unexpected exception occurred."
msgstr "예기치 않은 예외가 발생했습니다."

#: eeschema/libarch.cpp:101
#, c-format
msgid "Symbol %s not found in any library or cache."
msgstr "심볼 %s을(를) 라이브러리 또는 캐시에서 찾을 수 없습니다."

#: eeschema/libarch.cpp:117
#, c-format
msgid "Errors occurred creating symbol library %s."
msgstr "심볼 라이브러리 %s을(를) 만드는 동안 오류가 발생했습니다."

#: eeschema/menubar.cpp:97
msgid "Insert Schematic Sheet Content..."
msgstr "회로도 시트 컨텐츠 삽입..."

#: eeschema/menubar.cpp:98
msgid ""
"Append schematic sheet content from another project to the current sheet"
msgstr "다른 프로젝트의 개략도 시트 내용을 현재 시트에 추가합니다"

#: eeschema/menubar.cpp:106 eeschema/symbol_editor/menubar_symbol_editor.cpp:65
#: pcbnew/menubar_footprint_editor.cpp:64 pcbnew/menubar_pcb_editor.cpp:111
msgid "Import"
msgstr "가져오기"

#: eeschema/menubar.cpp:109
msgid "Non-KiCad Schematic..."
msgstr "비 KiCad 회로도..."

#: eeschema/menubar.cpp:110
msgid ""
"Replace current schematic sheet with one imported from another application"
msgstr "현재 회로도 시트를 다른 응용 프로그램에서 가져온 것으로 교체"

#: eeschema/menubar.cpp:115
msgid "Footprint Assignments..."
msgstr "풋프린트 할당…"

#: eeschema/menubar.cpp:116 eeschema/symbol_editor/menubar_symbol_editor.cpp:69
#: pcbnew/menubar_footprint_editor.cpp:68 pcbnew/menubar_pcb_editor.cpp:116
msgid "Graphics..."
msgstr "그래픽…"

#: eeschema/menubar.cpp:126
msgid "Drawing to Clipboard"
msgstr "클립보드에 그리기"

#: eeschema/menubar.cpp:127 pcbnew/menubar_pcb_editor.cpp:114
#: pcbnew/pcb_edit_frame.cpp:217
msgid "Netlist..."
msgstr "네트리스트…"

#: eeschema/menubar.cpp:129
msgid "Symbols to Library..."
msgstr "심볼을 라이브러리로..."

#: eeschema/menubar.cpp:131
msgid "Symbols to New Library..."
msgstr "심볼을 새 라이브러리로.."

#: eeschema/menubar.cpp:341
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:172
#: pagelayout_editor/menubar.cpp:153 pcbnew/menubar_footprint_editor.cpp:236
#: pcbnew/menubar_pcb_editor.cpp:461
msgid "&Place"
msgstr "배치 (&P)"

#: eeschema/menubar.cpp:342
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:173
#: pagelayout_editor/menubar.cpp:154 pcbnew/menubar_footprint_editor.cpp:237
#: pcbnew/menubar_pcb_editor.cpp:463
msgid "&Inspect"
msgstr "검사 (&I)"

#: eeschema/menubar.cpp:343 gerbview/menubar.cpp:233 kicad/menubar.cpp:219
#: pcbnew/menubar_footprint_editor.cpp:238 pcbnew/menubar_pcb_editor.cpp:464
msgid "&Tools"
msgstr "도구 (&T)"

#: eeschema/menubar.cpp:344
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:174
#: pagelayout_editor/menubar.cpp:155 pcbnew/menubar_footprint_editor.cpp:239
#: pcbnew/menubar_pcb_editor.cpp:465
msgid "P&references"
msgstr "설정 (&r)"

#: eeschema/net_navigator.cpp:56
#, c-format
msgid "Wire from %s, %s to %s, %s"
msgstr "%s, %s에서 %s, %s까지 배선"

#: eeschema/net_navigator.cpp:64
#, c-format
msgid "Bus from %s, %s to %s, %s"
msgstr "%s, %s에서 %s, %s까지 버스"

#: eeschema/net_navigator.cpp:72
msgid "Graphic line not connectable"
msgstr "그래픽 라인을 연결할 수 없음"

#: eeschema/net_navigator.cpp:85
#, c-format
msgid "Symbol '%s' pin '%s'"
msgstr "심볼 '%s' 핀 '%s'"

#: eeschema/net_navigator.cpp:97
#, c-format
msgid "Sheet '%s' pin '%s'"
msgstr "시트 '%s' 핀 '%s'"

#: eeschema/net_navigator.cpp:106
#, c-format
msgid "Label '%s' at %s, %s"
msgstr "'%s' 라벨 %s, %s"

#: eeschema/net_navigator.cpp:116
#, c-format
msgid "Global label '%s' at %s, %s"
msgstr "'%s' 전역 라벨 %s, %s"

#: eeschema/net_navigator.cpp:126
#, c-format
msgid "Hierarchical label '%s' at %s, %s"
msgstr "'%s' 계층 라벨 %s, %s"

#: eeschema/net_navigator.cpp:136
#, c-format
msgid "Junction at %s, %s"
msgstr "%s 교차점, %s"

#: eeschema/net_navigator.cpp:146
#, c-format
msgid "Bus to wire entry from %s, %s to %s, %s"
msgstr "버스-와이어 항목 (%s, %s ~ %s, %s)"

#: eeschema/net_navigator.cpp:158
#, c-format
msgid "Bus to bus entry from %s, %s to %s, %s"
msgstr "버스 - 버스 항목(%s, %s ~ %s, %s)"

#: eeschema/net_navigator.cpp:166
#, c-format
msgid "Unhandled item type %d"
msgstr "처리되지 않은 항목 유형 %d"

#: eeschema/netlist_exporters/netlist_exporter_allegro.cpp:56
msgid "Failed to create directory 'devices' ."
msgstr "'장치' 디렉토리를 만들지 못함."

#: eeschema/netlist_exporters/netlist_exporter_allegro.cpp:419
#, c-format
msgid "Failed to create file '%s'.\n"
msgstr "파일 '%s'의 생성에 실패함.\n"

#: eeschema/netlist_exporters/netlist_exporter_spice.cpp:475
#, c-format
msgid "Could not open file '%s' to write IBIS model"
msgstr "IBIS 모델을 쓰기 위해 '%s' 파일을 열 수 없음"

#: eeschema/netlist_exporters/netlist_exporter_spice.cpp:529
#, c-format
msgid "Could not find library file '%s'"
msgstr "라이브러리 파일 '%s'을(를) 찾을 수 없음"

#: eeschema/netlist_exporters/netlist_generator.cpp:152
#, c-format
msgid "Command error. Return code %d."
msgstr "명령 오류입니다. 코드 %d을(를) 반환합니다."

#: eeschema/netlist_exporters/netlist_generator.cpp:158
msgid "Success."
msgstr "성공."

#: eeschema/netlist_exporters/netlist_generator.cpp:207
msgid "Error: duplicate sheet names. Continue?"
msgstr "오류: 시트 이름이 중복됩니다. 계속합니까?"

#: eeschema/picksymbol.cpp:121
msgid "Change Unit"
msgstr "유닛 변경"

#: eeschema/picksymbol.cpp:138
#, c-format
msgid "No alternate body style found for symbol '%s' in library '%s'."
msgstr "라이브러리 '%s'에서 심볼 '%s'의 대체 바디 스타일을 찾을 수 없습니다."

#: eeschema/picksymbol.cpp:161 eeschema/tools/sch_edit_tool.cpp:1710
#, fuzzy
msgid "Change Body Style"
msgstr "본체 유형"

#: eeschema/picksymbol.cpp:178
msgid "Set Pin Function"
msgstr "핀 기능 설정"

#: eeschema/pin_numbers.cpp:124 pcbnew/zones.h:61
msgid "none"
msgstr "없음"

#: eeschema/printing/dialog_print_using_printer.cpp:384
msgid "Print Schematic"
msgstr "회로도 인쇄"

#: eeschema/printing/dialog_print_using_printer.cpp:391
msgid "An error occurred attempting to print the schematic."
msgstr "회로도를 출력하는 도중 오류가 발생하였습니다."

#: eeschema/printing/dialog_print_using_printer_base.cpp:24
msgid "Print (or not) the Frame references."
msgstr "프레임 참조를 출력합니다 (또는 출력하지 않음)."

#: eeschema/printing/dialog_print_using_printer_base.cpp:46
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:219
msgid "Print background color"
msgstr "배경색 인쇄"

#: eeschema/printing/dialog_print_using_printer_base.cpp:49
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:224
msgid "Use a different color theme for printing:"
msgstr "인쇄할 때 다른 색상 테마 사용:"

#: eeschema/printing/sch_printout.cpp:79
#, c-format
msgid "Print page %d"
msgstr "페이지 인쇄 %d"

#: eeschema/project_rescue.cpp:198
#, c-format
msgid "Rename %s to %s"
msgstr "%s에서 %s(으)로 이름 바꾸기"

#: eeschema/project_rescue.cpp:318 eeschema/project_rescue.cpp:491
#, c-format
msgid ""
"Cannot rescue symbol %s which is not available in any library or the cache."
msgstr ""
"심볼 %s을(를) 복구할 수 없습니다. 어떠한 라이브러리나 캐시에서도 찾을 수 없습"
"니다."

#: eeschema/project_rescue.cpp:321 eeschema/project_rescue.cpp:497
#, c-format
msgid "Rescue symbol %s found only in cache library to %s."
msgstr "캐시 라이브러리에서만 찾을 수 있는 심볼 %s을(를) %s(으)로 복구."

#: eeschema/project_rescue.cpp:324 eeschema/project_rescue.cpp:503
#, c-format
msgid "Rescue modified symbol %s to %s"
msgstr "심볼 %s을(를) %s(으)로 수정하여 복구"

#: eeschema/project_rescue.cpp:597
msgid "This project has nothing to rescue."
msgstr "이 프로젝트는 복구할 사항이 없습니다."

#: eeschema/project_rescue.cpp:612
msgid "No symbols were rescued."
msgstr "아무 심볼도 복구되지 않았습니다."

#: eeschema/project_rescue.cpp:720
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:227
#, c-format
msgid "Failed to create symbol library file '%s'."
msgstr "심볼 라이브러리 파일 '%s'을(를) 만들지 못했습니다."

#: eeschema/project_rescue.cpp:873
#, c-format
msgid "Failed to save rescue library %s."
msgstr "복구 라이브러리 %s을(를) 저장하는 데에 실패하였습니다."

#: eeschema/project_rescue.cpp:896
msgid "Error occurred saving project specific symbol library table."
msgstr "프로젝트별 심볼 라이브러리 테이블을 저장하는 동안 오류가 발생했습니다."

#: eeschema/project_sch.cpp:113 pcbnew/board_connected_item.cpp:129
msgid "Not Found"
msgstr "찾을 수 없음"

#: eeschema/project_sch.cpp:115
msgid "The following libraries were not found:"
msgstr "다음 라이브러리를 찾을 수 없습니다:"

#: eeschema/project_sch.cpp:168 eeschema/sheet.cpp:397
#, c-format
msgid "Error loading the symbol library table '%s'."
msgstr "심볼 라이브러리 테이블 '%s'을(를) 불러오는 중에 오류가 발생했습니다."

#: eeschema/sch_base_frame.cpp:230
#, c-format
msgid ""
"Error saving global symbol library table:\n"
"%s"
msgstr ""
"전역 심볼 라이브러리 테이블 저장 중 오류:\n"
"%s"

#: eeschema/sch_base_frame.cpp:246
#, c-format
msgid ""
"Error saving project-specific symbol library table:\n"
"%s"
msgstr ""
"프로젝트별 심볼 라이브러리 테이블을 저장하는 중 오류:\n"
"%s"

#: eeschema/sch_base_frame.cpp:265 pcbnew/footprint_libraries_utils.cpp:410
msgid "Add the library to the global library table?"
msgstr "전역 라이브러리 표에 라이브러리를 추가 하겠습니까?"

#: eeschema/sch_base_frame.cpp:266 pcbnew/footprint_libraries_utils.cpp:411
msgid "Add To Global Library Table"
msgstr "전역 라이브러리 테이블에 추가"

#: eeschema/sch_base_frame.cpp:276 eeschema/widgets/search_handlers.cpp:353
#: pcbnew/footprint_libraries_utils.cpp:421
msgid "Global"
msgstr "전역"

#: eeschema/sch_base_frame.cpp:279 pcbnew/footprint_libraries_utils.cpp:424
msgid "Choose the Library Table to add the library to:"
msgstr "라이브러리를 추가할 라이브러리 테이블 선택:"

#: eeschema/sch_base_frame.cpp:280 pcbnew/footprint_libraries_utils.cpp:425
msgid "Add To Library Table"
msgstr "라이브러리 테이블에 추가"

#: eeschema/sch_base_frame.cpp:563
msgid "No symbol libraries are loaded."
msgstr "심볼 라이브러리를 불러오지 않았습니다."

#: eeschema/sch_base_frame.cpp:608
msgid "Select Symbol Library"
msgstr "심볼 라이브러리 선택"

#: eeschema/sch_base_frame.cpp:723
msgid ""
"The library containing the current symbol has changed.\n"
"Do you want to reload the library?"
msgstr ""
"현재 심볼이 포함된 라이브러리가 변경되었습니다.\n"
"라이브러리를 다시 로드할까요?"

#: eeschema/sch_bus_entry.cpp:426
msgid "Bus to Wire Entry"
msgstr "버스 - 와이어 항목"

#: eeschema/sch_bus_entry.cpp:432
msgid "Bus to Bus Entry"
msgstr "버스 - 버스 항목"

#: eeschema/sch_bus_entry.cpp:505 eeschema/sch_line.cpp:97
#: eeschema/sch_line.cpp:935 eeschema/tools/sch_edit_tool.cpp:194
msgid "Wire"
msgstr "와이어"

#: eeschema/sch_bus_entry.cpp:506 eeschema/sch_line.cpp:98
#: eeschema/sch_line.cpp:936
msgid "Bus"
msgstr "버스"

#: eeschema/sch_bus_entry.cpp:509
msgid "Bus Entry Type"
msgstr "버스 항목 유형"

#: eeschema/sch_bus_entry.cpp:521 eeschema/sch_junction.cpp:304
#: eeschema/sch_label.cpp:1230 eeschema/sch_line.cpp:960
#: pcbnew/generators/pcb_tuning_pattern.cpp:1940 pcbnew/pad.cpp:995
#: pcbnew/pcb_track.cpp:1163 pcbnew/tools/pcb_control.cpp:1678
#: pcbnew/zone.cpp:579
msgid "Resolved Netclass"
msgstr "확인된 네트클래스"

#: eeschema/sch_connection.cpp:435
msgid "Connection Name"
msgstr "연결 이름"

#: eeschema/sch_connection.cpp:439 eeschema/sch_connection.cpp:448
#, c-format
msgid "Bus Alias %s Members"
msgstr "버스 별칭 %s 멤버"

#: eeschema/sch_edit_frame.cpp:141
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:63
msgid "KiCad Schematic Editor"
msgstr "KiCad 회로도 편집기"

#: eeschema/sch_edit_frame.cpp:204 eeschema/sch_edit_frame.cpp:1952
msgid "Schematic Hierarchy"
msgstr "회로도 계층"

#: eeschema/sch_edit_frame.cpp:374
msgid "New schematic file is unsaved"
msgstr "새 회로도 파일이 저장되지 않음"

#: eeschema/sch_edit_frame.cpp:950
#: eeschema/symbol_editor/symbol_edit_frame.cpp:573
#: eeschema/symbol_editor/symbol_editor.cpp:1199
#: pagelayout_editor/pl_editor_frame.cpp:398
#: pcbnew/footprint_edit_frame.cpp:758 pcbnew/footprint_edit_frame.cpp:798
#: pcbnew/pcb_edit_frame.cpp:1080
#, c-format
msgid "Save changes to '%s' before closing?"
msgstr "닫기 전에 '%s'의 변경 사항을 저장할까요?"

#: eeschema/sch_edit_frame.cpp:1103
msgid ""
"Cannot update the PCB, because the Schematic Editor is opened in stand-alone "
"mode. In order to create/update PCBs from schematics, launch the KiCad shell "
"and create a project."
msgstr ""
"회로도 편집기가 스탠드얼론 모드에서 열려 있기 때문에 PCB를 업데이트할 수 없습"
"니다. 회로도에서 PCB를 생성/업데이트하려면 KiCad 매니저를 실행하여 프로젝트"
"를 생성하세요."

#: eeschema/sch_edit_frame.cpp:1269
msgid "New Schematic"
msgstr "새로운 회로도"

#: eeschema/sch_edit_frame.cpp:1281
#, c-format
msgid "Schematic file '%s' already exists."
msgstr "회로도 파일 '%s'은(는) 이미 존재합니다."

#: eeschema/sch_edit_frame.cpp:1306
msgid "Open Schematic"
msgstr "회로도 열기"

#: eeschema/sch_edit_frame.cpp:1375
msgid "Assigning footprints requires a fully annotated schematic."
msgstr "풋프린트를 할당하기 위해서는 완전히 주석 처리된 회로도가 필요합니다."

#: eeschema/sch_edit_frame.cpp:1402
msgid "Could not open CvPcb"
msgstr "CvPcb를 열 수 없습니다"

#: eeschema/sch_edit_frame.cpp:1645 eeschema/sim/simulator_frame.cpp:327
#: kicad/kicad_manager_frame.cpp:837 pcbnew/footprint_edit_frame.cpp:974
#: pcbnew/pcb_edit_frame.cpp:1666
msgid "[Read Only]"
msgstr "[읽기 전용]"

#: eeschema/sch_edit_frame.cpp:1648 eeschema/sim/simulator_frame.cpp:330
#: pcbnew/footprint_edit_frame.cpp:983 pcbnew/pcb_edit_frame.cpp:1669
msgid "[Unsaved]"
msgstr "[저장되지 않음]"

#: eeschema/sch_edit_frame.cpp:1652
msgid "[no schematic loaded]"
msgstr "[불러온 회로도가 없습니다]"

#: eeschema/sch_edit_frame.cpp:1864
msgid "Schematic Cleanup"
msgstr "회로도 정리"

#: eeschema/sch_edit_frame.cpp:1977
#, c-format
msgid "Highlighted net: %s"
msgstr "강조 표시된 네트: %s"

#: eeschema/sch_edit_frame.cpp:2155
msgid "Save Symbol to Schematic"
msgstr "회로도에 심볼 저장"

#: eeschema/sch_edit_frame.cpp:2260 eeschema/tools/ee_actions.cpp:60
msgid "Compare Symbol with Library"
msgstr "라이브러리와 심볼 비교"

#: eeschema/sch_field.cpp:955
#, c-format
msgid "Go to Page %s (%s)"
msgstr "%s (%s) 페이지로 이동"

#: eeschema/sch_field.cpp:961
msgid "Back to Previous Selected Sheet"
msgstr "이전에 선택한 시트로 돌아가기"

#: eeschema/sch_field.cpp:1057 eeschema/sch_label.cpp:249
msgid "Sheet References"
msgstr "시트 참조"

#: eeschema/sch_io/altium/sch_io_altium.cpp:488
#, c-format
msgid ""
"The file name for sheet %s is undefined, this is probably an Altium signal "
"harness that got converted to a sheet."
msgstr ""
"시트 %s의 파일 이름은 정의되지 않았으며 시트로 변환 된 Altium 신호 하네스 일 "
"수 있습니다."

#: eeschema/sch_io/altium/sch_io_altium.cpp:557
#, c-format
msgid "Storage file not fully parsed (%d bytes remaining)."
msgstr "저장소 파일이 완전히 파싱되지 않았습니다 (%d바이트 남음)."

#: eeschema/sch_io/altium/sch_io_altium.cpp:617
msgid "Blanket not currently supported."
msgstr "블랭킷은 현재 지원되지 않음."

#: eeschema/sch_io/altium/sch_io_altium.cpp:621
#, c-format
msgid "Unknown or unexpected record ID %d found inside \"Additional\" section."
msgstr "알 수 없거나 예기치 않은 레코드 ID %d가 \"추가\" 섹션에 있습니다."

#: eeschema/sch_io/altium/sch_io_altium.cpp:663
msgid "Expected Altium Schematic file version 5.0"
msgstr "알티움 회로도 파일 버전 5.0이 필요함"

#: eeschema/sch_io/altium/sch_io_altium.cpp:695
msgid "Record 'IEEE_SYMBOL' not handled."
msgstr "'IEEE_SYMBOL' 레코드가 처리되지 않았습니다."

#: eeschema/sch_io/altium/sch_io_altium.cpp:720
msgid "Record 'PIECHART' not handled."
msgstr "레코드 '파이차트'가 처리되지 않았습니다."

#: eeschema/sch_io/altium/sch_io_altium.cpp:816
msgid "Parameter Set not currently supported."
msgstr "현재 지원되지 않는 매개변수 설정임."

#: eeschema/sch_io/altium/sch_io_altium.cpp:841
msgid "Compile mask not currently supported."
msgstr "컴파일 마스크는 현재 지원되지 않습니다."

#: eeschema/sch_io/altium/sch_io_altium.cpp:848
#, c-format
msgid "Unknown or unexpected record id %d found inside \"FileHeader\" section."
msgstr ""
"알 수 없거나 예기치 않은 레코드 ID %d가 \"파일 헤더\"섹션에서 발견되었습니다."

#: eeschema/sch_io/altium/sch_io_altium.cpp:953
#, c-format
msgid "Symbol \"%s\" in sheet \"%s\" at index %d replaced with symbol \"%s\"."
msgstr "기호 \"%s\"가 시트\"%s\"의 인덱스 %d에서 \"%s\"기호로 대체됨."

#: eeschema/sch_io/altium/sch_io_altium.cpp:1104
#: eeschema/sch_io/altium/sch_io_altium.cpp:3122
msgid "Pin has unexpected orientation."
msgstr "예기치 않은 핀 방향."

#: eeschema/sch_io/altium/sch_io_altium.cpp:1151
msgid "Pin has unexpected electrical type."
msgstr "핀에 예기치 않은 전기 유형이 있습니다."

#: eeschema/sch_io/altium/sch_io_altium.cpp:1156
msgid "Pin has unexpected outer edge type."
msgstr "핀에 예기치 않은 외부 모서리 타입이 있습니다."

#: eeschema/sch_io/altium/sch_io_altium.cpp:1159
msgid "Pin has unexpected inner edge type."
msgstr "핀에 예기치 않은 내부 모서리 타입이 있습니다."

#: eeschema/sch_io/altium/sch_io_altium.cpp:1571
#, c-format
msgid "Bezier has %d control points. At least 2 are expected."
msgstr "베지어 곡선에는 %d 개의 조절점이 있습니다. 최소 2개가 필요합니다."

#: eeschema/sch_io/altium/sch_io_altium.cpp:2626
#, c-format
msgid ""
"Altium's harness connector (%s) was imported as a hierarchical sheet. Please "
"review the imported schematic."
msgstr ""
"Altium의 하니스 커넥터(%s)를 계층 시트로 가져왔습니다. 가져온 회로도를 검토하"
"십시오."

#: eeschema/sch_io/altium/sch_io_altium.cpp:3004
#: eeschema/sch_io/easyeda/sch_easyeda_parser.cpp:405
msgid "Power Port with unknown style imported as 'Bar' type."
msgstr "알 수 없는 스타일의 전원 포트를 '바' 유형으로 가져왔습니다."

#: eeschema/sch_io/altium/sch_io_altium.cpp:3052
#: eeschema/sch_io/easyeda/sch_easyeda_parser.cpp:1002
#: eeschema/sch_io/easyedapro/sch_easyedapro_parser.cpp:676
#, c-format
msgid "Power symbol creates a global label with name '%s'"
msgstr "전원 심볼은 '%s'라는 이름의 전역 라벨을 생성합니다"

#: eeschema/sch_io/altium/sch_io_altium.cpp:3186
#, c-format
msgid ""
"Altium's harness port (%s) was imported as a text box. Please review the "
"imported schematic."
msgstr ""
"Altium의 하네스 포트(%s)를 텍스트 상자로 가져왔습니다. 가져온 회로도를 검토하"
"십시오."

#: eeschema/sch_io/altium/sch_io_altium.cpp:3243
#, c-format
msgid "Port %s has no connections."
msgstr "포트 %s에 연결이 없습니다."

#: eeschema/sch_io/altium/sch_io_altium.cpp:3444
#, c-format
msgid "Embedded file %s not found in storage."
msgstr "내장된 파일 %s을 저장소에서 찾을 수 없습니다."

#: eeschema/sch_io/altium/sch_io_altium.cpp:3461
#: eeschema/sch_io/altium/sch_io_altium.cpp:3480
#, c-format
msgid "Error reading image %s."
msgstr "이미지 %s를 읽는 동안 오류가 발생했습니다."

#: eeschema/sch_io/altium/sch_io_altium.cpp:3473
#, c-format
msgid "File not found %s."
msgstr "%s 파일을 찾을 수 없습니다."

#: eeschema/sch_io/altium/sch_io_altium.cpp:4090
#, c-format
msgid "Unknown or unexpected record id %d found in %s."
msgstr "알 수 없거나 예상치 못한 레코드 ID %d가 %s에 있습니다."

#: eeschema/sch_io/altium/sch_io_altium.cpp:4217
msgid "Expected Altium Schematic Library file version 5.0"
msgstr "Altium Schematic Library 파일 버전 5.0이 필요함"

#: eeschema/sch_io/altium/sch_io_altium.h:63
msgid "Altium schematic files"
msgstr "알티움 회로도 파일"

#: eeschema/sch_io/altium/sch_io_altium.h:68
msgid "Altium Schematic Library or Integrated Library"
msgstr "Altium 회로도 라이브러리 또는 통합 라이브러리"

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:72
msgid "The selected file does not appear to be a CADSTAR parts Library file"
msgstr "선택한 파일이 CADSTAR 부품 라이브러리 파일이 아닌 것 같음"

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:117
#, c-format
msgid ""
"Unable to find symbol %s, referenced by part %s. The part was not loaded."
msgstr ""
"참조하는 부품의 심볼 %s을(를) 찾을 수 없어 부품 %s이 로드되지 않았습니다."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:132
#, c-format
msgid ""
"Inconsistent pin numbers in symbol %s compared to the one defined in part "
"%s. The part was not loaded."
msgstr ""
"심볼 %s의 핀 번호와 파트 %s에 정의된 핀 번호가 일치하지 않음. 부품을 불러오"
"지 못했습니다."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:367
#, c-format
msgid ""
"The CADSTAR design contains variants which has no KiCad equivalent. Only the "
"master variant ('%s') was loaded."
msgstr ""
"CADSTAR 디자인에는 KiCad에 대응되지 않는 변형이 포함되어 있습니다. 마스터 변"
"형 ('%s') 만 불러옵니다."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:376
msgid ""
"The CADSTAR design contains grouped items which has no KiCad equivalent. Any "
"grouped items have been ungrouped."
msgstr ""
"CADSTAR 디자인에는 KiCad에 대응되지 않는 그룹화된 항목이 포함되어 있습니다. "
"그룹화된 항목은 그룹 해제되었습니다."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:383
#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:160
msgid ""
"The CADSTAR design contains re-use blocks which has no KiCad equivalent. The "
"re-use block information has been discarded during the import."
msgstr ""
"CADSTAR 디자인에는 KiCad에 대응되지 않는 재사용 블록이 포함되어 있습니다. 재"
"사용 블록이 불러오기 과정에서 삭제되었습니다."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:497
msgid ""
"CADSTAR fonts are different to the ones in KiCad. This will likely result in "
"alignment issues. Please review the imported text elements carefully and "
"correct manually if required."
msgstr ""
"CADSTAR 글꼴은 KiCad의 글꼴과 다릅니다. 이로 인해 정렬 문제가 발생할 수 있습"
"니다. 가져온 텍스트 요소를 주의 깊게 검토하고 필요한 경우 수동으로 수정하십시"
"오."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:502
#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:169
msgid ""
"The CADSTAR design has been imported successfully.\n"
"Please review the import errors and warnings (if any)."
msgstr ""
"CADSTAR 디자인을 성공적으로 불러왔습니다.\n"
"불러오기 시 발생한 오류와 경고를 검토하십시오 (있을 경우에)."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:521
#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:73
#, c-format
msgid ""
"The design is too large and cannot be imported into KiCad. \n"
"Please reduce the maximum design size in CADSTAR by navigating to: \n"
"Design Tab -> Properties -> Design Options -> Maximum Design Size. \n"
"Current Design size: %.2f, %.2f millimeters. \n"
"Maximum permitted design size: %.2f, %.2f millimeters.\n"
msgstr ""
"디자인이 너무 커서 KiCad로 가져올 수 없습니다. \n"
"다음으로 이동하여 CADSTAR의 최대 설계 크기를 줄여주세요: \n"
"디자인 탭 -> 속성 -> 디자인 옵션 -> 최대 설계 크기. \n"
"현재 디자인 크기: %.2f, %.2f 밀리미터. \n"
"최대 허용 설계 크기: %.2f, %.2f 밀리미터 입니다.\n"

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:582
msgid ""
"The selected file is a CADSTAR symbol library. It does not contain a "
"schematic design so cannot be imported/opened in this way."
msgstr ""
"선택한 파일은 CADSTAR 심볼 라이브러리입니다. 회로도가 포함되어 있지 않으므로 "
"이 방법으로 가져오거나 열 수 없습니다."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:587
msgid "The CADSTAR schematic might be corrupt: there is no root sheet."
msgstr "CADSTAR 회로도가 손상되었을 수 있습니다: 루트 시트가 없습니다."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:661
#, c-format
msgid ""
"Part definition '%s' references symbol '%s' (alternate '%s') which could not "
"be found in the symbol library. The part has not been loaded into the KiCad "
"library."
msgstr ""
"부품 정의 '%s'은(는) 심볼 라이브러리에서 찾을 수 없는 심볼 '%s' ('%s' 대체) "
"를 참조합니다. KiCad 라이브러리에 부품을 불러오지 않았습니다."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:687
#, c-format
msgid ""
"Part definition '%s' has an incomplete definition (no symbol definitions are "
"associated with it). The part has not been loaded into the KiCad library."
msgstr ""
"부품 정의 '%s'에 불완전한 정의가 있습니다(연결된 기호 정의가 없음). 부품이 "
"KiCad 라이브러리에 로드되지 않았습니다."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:719
#, c-format
msgid ""
"Symbol '%s' references part '%s' which could not be found in the library. "
"The symbol was not loaded"
msgstr ""
"심볼 '%s'은(는) 라이브러리에서 찾을 수 없는 부품 '%s'을(를) 참조합니다. 심볼"
"을 불러오지 않았습니다"

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:827
#, c-format
msgid ""
"Symbol ID '%s' references library symbol '%s' which could not be found in "
"the library. Did you export all items of the design?"
msgstr ""
"심볼 ID '%s'은(는) 라이브러리에서 찾을 수 없는 라이브러리 심볼 '%s'을(를) 참"
"조합니다. 디자인의 모든 항목을 내보낸 것이 맞습니까?"

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:837
#, c-format
msgid ""
"Symbol ID '%s' is a signal reference or global signal but it has too many "
"pins. The expected number of pins is 1 but %d were found."
msgstr ""
"심볼 ID '%s'은(는) 신호 참조이거나 전역 신호입니다만, 핀 수가 너무 많습니다. "
"필요한 핀 개수는 1개이나 %d개가 발견되었습니다."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:977
#, c-format
msgid ""
"Symbol ID '%s' is of an unknown type. It is neither a symbol or a net "
"power / symbol. The symbol was not loaded."
msgstr ""
"심볼 ID '%s'은(는) 알 수 없는 유형입니다. 심볼이 아니거나 네트 파워 / 심볼입"
"니다. 심볼을 불러오지 않았습니다."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:993
#, c-format
msgid ""
"Symbol '%s' is scaled in the original CADSTAR schematic but this is not "
"supported in KiCad. When the symbol is reloaded from the library, it will "
"revert to the original 1:1 scale."
msgstr ""
"원본 CADSTAR 회로도에서 심볼 '%s'은(는) 크기가 조정되었지만, 이는 KiCad에서 "
"지원되지 않습니다. 라이브러리에서 심볼을 다시 불러오면, 원본의 1:1 배율로 되"
"돌아갑니다."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:1468
#, c-format
msgid ""
"Documentation Symbol '%s' refers to symbol definition ID '%s' which does not "
"exist in the library. The symbol was not loaded."
msgstr ""
"문서 심볼 '%s'은(는) 라이브러리에 존재하지 않는 심볼 정의 ID'%s'을(를) 참조합"
"니다. 심볼을 불러오지 않았습니다."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:1577
msgid "Text Variables could not be set as there is no project attached."
msgstr "연결된 프로젝트가 없기 때문에 텍스트 변수를 설정할 수 없습니다."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:2114
#, c-format
msgid ""
"Symbol '%s' is rotated by an angle of %.1f degrees in the original CADSTAR "
"design but KiCad only supports rotation angles multiples of 90 degrees. The "
"connecting wires will need manual fixing."
msgstr ""
"원본 CADSTAR 디자인에서 심볼 '%s'은(는) %.1f씩 회전할 수 있지만, KiCad는 90도"
"의 배수 회전만을 지원합니다. 연결 와이어는 수동 수정이 필요할 수 있습니다."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:2128
#, c-format
msgid ""
"Symbol '%s' references sheet ID '%s' which does not exist in the design. The "
"symbol was not loaded."
msgstr ""
"심볼 '%s'은(는) 시트 ID '%s'을(를) 참조하지만, 이는 현재 디자인에서 존재하지 "
"않습니다. 심볼을 불러오지 않았습니다."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:2265
#, c-format
msgid ""
"Net %s references unknown net element %s. The net was not properly loaded "
"and may require manual fixing."
msgstr ""
"네트 %s은(는) 알 수 없는 네트 요소 %s을(를) 참조합니다. 네트는 정상적으로 불"
"러와지지 않았으며, 수동 수정이 필요할 수 있습니다."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:2532
#, c-format
msgid ""
"The block ID %s (Block name: '%s') is drawn on sheet '%s' but is not linked "
"to another sheet in the design. KiCad requires all sheet symbols to be "
"associated to a sheet, so the block was not loaded."
msgstr ""
"블록 ID %s (블록 이름: '%s') 는 시트 '%s' 에 그려졌으나, 디자인 상의 다른 시"
"트에 연결되지 않았습니다. KiCad는 모든 시트 심볼이 시트와 연결되어야 하므로, "
"블록을 불러오지 않았습니다."

#: eeschema/sch_io/cadstar/cadstar_sch_archive_loader.cpp:2557
#, c-format
msgid ""
"The CADSTAR schematic might be corrupt: Block %s references a child sheet "
"but has no Figure defined."
msgstr ""
"CADSTAR 회로도가 손상되었을 가능성이 있습니다: 블록 %s은(는) 하위 시트를 참조"
"하지만 정의된 형상이 없습니다."

#: eeschema/sch_io/cadstar/sch_io_cadstar_archive.cpp:237
msgid ""
"Path to the CADSTAR schematic archive (*.csa) file related to this CADSTAR "
"parts library. If none specified it is assumed to be 'symbol.csa' in the "
"same folder."
msgstr ""
"이 CADSTAR 부품 라이브러리와 관련된 CADSTAR 회로도 아카이브(*.csa) 파일의 경"
"로입니다. 아무것도 지정하지 않으면 동일한 폴더에 있는 'symbol.csa'로 간주됩니"
"다."

#: eeschema/sch_io/cadstar/sch_io_cadstar_archive.cpp:242
msgid ""
"Name of the footprint library related to the symbols in this library. You "
"should create a separate entry for the CADSTAR PCB Archive (*.cpa) file in "
"the footprint library tables. If none specified, 'cadstarpcblib' is assumed."
msgstr ""
"이 라이브러리의 심볼과 관련된 풋프린트 라이브러리의 이름입니다. 풋프린트 라이"
"브러리 테이블에 CADSTAR PCB Archive(*.cpa) 파일에 대한 별도의 항목을 만들어"
"야 합니다. 지정하지 않은 경우 'cadstarpcblib'으로 간주합니다."

#: eeschema/sch_io/cadstar/sch_io_cadstar_archive.cpp:286
#, c-format
msgid "Cannot find the .csa file corresponding to library '%s'."
msgstr "라이브러리 '%s'에 해당하는 .csa 파일을 찾을 수 없습니다."

#: eeschema/sch_io/cadstar/sch_io_cadstar_archive.h:55
msgid "CADSTAR Schematic Archive files"
msgstr "CADSTAR 회로도 보관 파일"

#: eeschema/sch_io/cadstar/sch_io_cadstar_archive.h:61
msgid "CADSTAR Parts Library files"
msgstr "CADSTAR 부품 라이브러리 파일"

#: eeschema/sch_io/database/sch_io_database.cpp:84
#, c-format
msgid "Error reading database table %s: %s"
msgstr "데이터베이스 테이블 %s 읽기 오류: %s"

#: eeschema/sch_io/database/sch_io_database.cpp:232
#, c-format
msgid "Could not load database library: settings file %s missing or invalid"
msgstr ""
"데이터베이스 라이브러리를 로드할 수 없습니다: 설정 파일 %s이 없거나 잘못되었"
"습니다"

#: eeschema/sch_io/database/sch_io_database.cpp:273
#, c-format
msgid "Could not load database library: could not connect to database %s (%s)"
msgstr ""
"데이터베이스 라이브러리를 로드할 수 없음: %s 데이터베이스에 연결할 수 없음"
"(%s)"

#: eeschema/sch_io/database/sch_io_database.h:50
msgid "KiCad database library files"
msgstr "KiCad 데이터베이스 라이브러리 파일"

#: eeschema/sch_io/eagle/sch_io_eagle.cpp:632
#: eeschema/sch_io/eagle/sch_io_eagle.cpp:649
#: pcbnew/pcb_io/eagle/pcb_io_eagle.cpp:3144
#, c-format
msgid "Unable to read file '%s'."
msgstr "파일 '%s'을(를) 읽을 수 없습니다."

#: eeschema/sch_io/eagle/sch_io_eagle.cpp:641
#, c-format
msgid ""
"'%s' is an Eagle binary-format file; only Eagle XML-format files can be "
"imported."
msgstr ""
"'%s'는 Eagle 이진 형식 파일이며, Eagle XML 형식 파일만 가져올 수 있습니다."

#: eeschema/sch_io/eagle/sch_io_eagle.cpp:1732
#, c-format
msgid ""
"Error parsing Eagle file. Could not find '%s' instance but it is referenced "
"in the schematic."
msgstr ""
"Eagle 파일을 파싱하는 중에 오류가 발생하였습니다. '%s' 인스턴스를 찾을 수 없"
"습니다만, 회로도에서 참조되고 있습니다."

#: eeschema/sch_io/eagle/sch_io_eagle.cpp:1780
#, c-format
msgid "Could not find '%s' in the imported library."
msgstr "가져온 라이브러리에서 '%s'을(를) 찾을 수 없습니다."

#: eeschema/sch_io/eagle/sch_io_eagle.h:91
msgid "Eagle XML schematic files"
msgstr "Eagle XML 회로도 파일"

#: eeschema/sch_io/eagle/sch_io_eagle.h:96
msgid "Eagle XML library files"
msgstr "Eagle XML 라이브러리 파일"

#: eeschema/sch_io/easyeda/sch_io_easyeda.cpp:145
#: eeschema/sch_io/easyeda/sch_io_easyeda.cpp:295
#: eeschema/sch_io/easyeda/sch_io_easyeda.cpp:414
#: eeschema/sch_io/easyeda/sch_io_easyeda.cpp:458
#: eeschema/sch_io/easyeda/sch_io_easyeda.cpp:492
#, c-format
msgid "Unable to find a valid schematic file in '%s'"
msgstr "'%s'에서 올바른 회로도 파일을 찾을 수 없음"

#: eeschema/sch_io/easyeda/sch_io_easyeda.cpp:267
#: eeschema/sch_io/easyeda/sch_io_easyeda.cpp:272
#: eeschema/sch_io/easyeda/sch_io_easyeda.cpp:466
#: eeschema/sch_io/easyeda/sch_io_easyeda.cpp:471
#, c-format
msgid "Error loading symbol '%s' from library '%s': %s"
msgstr "심볼 '%s'를 라이브러리 '%s'에서 불러오는 중 오류 발생: %s"

#: eeschema/sch_io/easyeda/sch_io_easyeda.cpp:392
#: eeschema/sch_io/easyeda/sch_io_easyeda.cpp:397
#: eeschema/sch_io/easyeda/sch_io_easyeda.cpp:434
#: eeschema/sch_io/easyeda/sch_io_easyeda.cpp:439
#, c-format
msgid "Error enumerating symbol library '%s': %s"
msgstr "심볼 라이브러리 '%s' 열거 중 오류 발생: %s"

#: eeschema/sch_io/easyeda/sch_io_easyeda.cpp:530
#: eeschema/sch_io/easyeda/sch_io_easyeda.cpp:535
#, c-format
msgid "Error loading schematic '%s': %s"
msgstr "회로도 '%s' 로드 중 오류 발생: %s"

#: eeschema/sch_io/easyeda/sch_io_easyeda.h:50
#: pcbnew/pcb_io/easyeda/pcb_io_easyeda_plugin.h:37
msgid "EasyEDA (JLCEDA) Std files"
msgstr "EasyEDA (JLCEDA) 표준 파일"

#: eeschema/sch_io/easyedapro/sch_easyedapro_parser.cpp:72
#: pcbnew/pcb_io/easyedapro/pcb_io_easyedapro_parser.cpp:73
#, c-format
msgid "Failed to parse value: '%s'"
msgstr "값 구문 분석 실패: '%s'"

#: eeschema/sch_io/http_lib/sch_io_http_lib.cpp:59
msgid "httplib plugin missing library table handle!"
msgstr "httplib 플러그인에 라이브러리 테이블 핸들이 없음!"

#: eeschema/sch_io/http_lib/sch_io_http_lib.cpp:97
#, c-format
msgid "Error retriving data from HTTP library %s: %s"
msgstr "HTTP 라이브러리 %s에서 데이터를 검색하는 중 오류 발생: %s"

#: eeschema/sch_io/http_lib/sch_io_http_lib.cpp:238
#, c-format
msgid "HTTP library settings file %s missing or invalid"
msgstr "HTTP 라이브러리 설정 파일 %s이 없거나 손상됨"

#: eeschema/sch_io/http_lib/sch_io_http_lib.cpp:247
#, c-format
msgid "HTTP library settings file %s is missing the API version number!"
msgstr "HTTP 라이브러리 설정 파일 %s에 API 버전 번호가 없음!"

#: eeschema/sch_io/http_lib/sch_io_http_lib.cpp:256
#, c-format
msgid ""
"HTTP library settings file %s uses API version %s, but KiCad requires "
"version %s"
msgstr ""
"HTTP 라이브러리 설정 파일 %s이(가) API 버전 %s을(를) 사용하지만, KiCad에 버"
"전 %s이(가) 필요함"

#: eeschema/sch_io/http_lib/sch_io_http_lib.cpp:267
#, c-format
msgid "HTTP library settings file %s is missing the root URL!"
msgstr "HTTP 라이브러리 설정 파일 %s에 루트 URL이 없음!"

#: eeschema/sch_io/http_lib/sch_io_http_lib.cpp:279
#, c-format
msgid "HTTP library settings file %s has an invalid library type"
msgstr "HTTP 라이브러리 설정 파일 %s에 잘못된 라이브러리 유형이 있음"

#: eeschema/sch_io/http_lib/sch_io_http_lib.cpp:326
#, c-format
msgid "Could not connect to %s. Errors: %s"
msgstr "%s에 연결할 수 없습니다. 오류: %s"

#: eeschema/sch_io/http_lib/sch_io_http_lib.h:46
msgid "KiCad HTTP library files"
msgstr "KiCad HTTP 라이브러리 파일"

#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy.cpp:116
#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy.cpp:288
#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr.cpp:308
#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:101
#: pcbnew/pcb_io/altium/altium_pcb.cpp:291
#: pcbnew/pcb_io/eagle/pcb_io_eagle.cpp:307
#: pcbnew/pcb_io/eagle/pcb_io_eagle.cpp:347
#: pcbnew/pcb_io/easyeda/pcb_io_easyeda_plugin.cpp:152
#: pcbnew/pcb_io/easyedapro/pcb_io_easyedapro.cpp:116
#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:71
#: pcbnew/pcb_io/fabmaster/pcb_io_fabmaster.cpp:62
#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:221
#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:505
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:2434
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:148
msgid "Open cancelled by user."
msgstr "사용자에 의해 열기가 취소되었습니다."

#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy.cpp:373
#, c-format
msgid "'%s' does not appear to be an Eeschema file."
msgstr "'%s'은(는) Eeschema 파일이 아닙니다."

#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy.cpp:403
msgid "Missing 'EELAYER END'"
msgstr "'EELAYER END'을(를) 찾을 수 없습니다"

#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy.cpp:451
#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy.cpp:723
#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy.cpp:733
msgid "unexpected end of file"
msgstr "예기치 않은 파일의 끝"

#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy.cpp:596
#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy_helpers.cpp:78
#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy_helpers.cpp:107
#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy_helpers.cpp:139
#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy_helpers.cpp:171
#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy_helpers.cpp:198
#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy_helpers.cpp:211
#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy_helpers.cpp:244
#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy_helpers.cpp:257
#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy_helpers.cpp:276
#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy_lib_cache.cpp:562
msgid "unexpected end of line"
msgstr "예기치 못한 라인의 끝"

#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy.cpp:686
msgid "Unexpected end of file"
msgstr "예기치 않은 파일의 끝"

#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy.cpp:1080
msgid "expected 'Italics' or '~'"
msgstr "'Italics' 또는 '~' 가 필요함"

#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy.cpp:1343
msgid "symbol field text attributes must be 3 characters wide"
msgstr "심볼 필드 텍스트 속성은 3 글자 너비로 구성되어야 합니다"

#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy.cpp:2217
#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr.cpp:1546
#, c-format
msgid "Symbol library '%s' already exists."
msgstr "심볼 라이브러리 '%s'이(가) 이미 존재합니다."

#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy.cpp:2243
#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr.cpp:1572
#, c-format
msgid "Symbol library '%s' cannot be deleted."
msgstr "심볼 라이브러리 '%s'을(를) 삭제할 수 없습니다."

#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy.h:81
msgid "KiCad legacy symbol library files"
msgstr "KiCad 레거시 심볼 라이브러리 파일"

#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy_helpers.cpp:222
msgid "expected unquoted string"
msgstr "예기치 않은 따옴표 없는 문자열"

#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy_lib_cache.cpp:71
#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_lib_cache.cpp:55
#, c-format
msgid "Library file '%s' not found."
msgstr "라이브러리 파일 '%s'을(를) 찾을 수 없습니다."

#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy_lib_cache.cpp:85
msgid "Unexpected end of file."
msgstr "예기치 않은 파일의 끝."

#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy_lib_cache.cpp:182
#, c-format
msgid "Insufficient permissions to read library '%s'."
msgstr "라이브러리 '%s'을(를) 읽을 수 있는 권한이 없습니다."

#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy_lib_cache.cpp:191
msgid "symbol document library file is empty"
msgstr "심볼 문서 라이브러리 파일이 비어 있음"

#: eeschema/sch_io/kicad_legacy/sch_io_kicad_legacy_lib_cache.cpp:1900
#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_lib_cache.cpp:528
#, c-format
msgid "library %s does not contain a symbol named %s"
msgstr "라이브러리 %s은(는) 심볼 이름 %s을(를) 포함하고 있지 않습니다"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr.cpp:214
#, c-format
msgid ""
"Could not load sheet '%s' because it already appears as a direct ancestor in "
"the schematic hierarchy."
msgstr ""
"'%s' 시트가 이미 회로도 계층 구조에서 직접 상위 항목으로 나타나므로 로드할 "
"수 없습니다."

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:271
#, c-format
msgid "Cannot parse %s as a symbol"
msgstr "%s을(를) 기호로 구문 분석할 수 없음"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:308
msgid "Invalid symbol name"
msgstr "잘못된 심볼 이름"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:327
#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:2844
#, c-format
msgid "Symbol %s contains invalid character '%c'"
msgstr "심볼 %s에 잘못된 문자 '%c'가 포함되어 있습니다"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:334
msgid "Invalid library identifier"
msgstr "잘못된 라이브러리 식별자"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:395
msgid "Invalid parent symbol name"
msgstr "잘못된 상위 심볼 이름"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:410
#, c-format
msgid "No parent for extended symbol %s"
msgstr "확장 심볼 %s에 대한 상위 항목이 없음"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:425
msgid "Invalid symbol unit name"
msgstr "잘못된 심볼 유닛 이름"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:438
#, c-format
msgid "Invalid symbol unit name prefix %s"
msgstr "잘못된 심볼 유닛 이름 접두사 %s"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:448
#, c-format
msgid "Invalid symbol unit name suffix %s"
msgstr "잘못된 심볼 유닛 이름 접미사 %s"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:454
#, c-format
msgid "Invalid symbol unit number %s"
msgstr "잘못된 심볼 유닛 번호 %s"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:462
#, c-format
msgid "Invalid symbol convert number %s"
msgstr "잘못된 심볼 변환 번호 %s"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:802
#, c-format
msgid "Invalid hyperlink url '%s'"
msgstr "잘못된 하이퍼링크 URL '%s'"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:875
msgid "Invalid pin names definition"
msgstr "잘못된 핀 이름 정의"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:896
#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:2071
msgid "Invalid property name"
msgstr "잘못된 속성 이름"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:904
#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:2079
msgid "Empty property name"
msgstr "빈 속성 이름"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:925
#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:2087
msgid "Invalid property value"
msgstr "잘못된 속성 값"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:1523
msgid "Invalid pin name"
msgstr "잘못된 핀 이름"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:1561
msgid "Invalid pin number"
msgstr "잘못된 핀 번호"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:1598
msgid "Invalid alternate pin name"
msgstr "올바르지 않은 대체 핀 이름"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:1773
#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:1835
msgid "Invalid text string"
msgstr "잘못된 텍스트 문자열"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:1919
msgid "Invalid page type"
msgstr "잘못된 페이지 유형"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:2046
msgid "Invalid title block comment number"
msgstr "잘못된 제목 블록 주석 번호"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:2205
msgid "Invalid sheet pin name"
msgstr "잘못된 시트 핀 이름"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:2213
msgid "Empty sheet pin name"
msgstr "빈 시트 핀 이름"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:2809
msgid "Invalid symbol library name"
msgstr "잘못된 심볼 라이브러리 이름"

#: eeschema/sch_io/kicad_sexpr/sch_io_kicad_sexpr_parser.cpp:2850
msgid "Invalid symbol library ID"
msgstr "잘못된 심볼 라이브러리 ID"

#: eeschema/sch_io/ltspice/ltspice_schematic.cpp:220
#, c-format
msgid "File at '%s' was ignored. Using previously found file at '%s' instead."
msgstr ""
"'%s'의 파일이 무시되었습니다. '%s'에서 이전에 찾은 파일을 대신 사용합니다."

#: eeschema/sch_io/ltspice/ltspice_schematic.cpp:360
#, c-format
msgid "Expecting integer at line %d in file %s"
msgstr "%d 줄 %s 파일에 정수가 필요함"

#: eeschema/sch_io/ltspice/ltspice_schematic.cpp:383
#, c-format
msgid "Expected data missing on line %d in file %s"
msgstr "%d 줄 %s 파일에 필요한 데이터가 없음"

#: eeschema/sch_io/ltspice/ltspice_schematic.cpp:389
#, c-format
msgid "Extra data found on line %d in file %s"
msgstr "%d 라인 %s 파일에서 추가 데이터가 발견됨"

#: eeschema/sch_io/ltspice/ltspice_schematic.cpp:415
msgid "Expecting 0, 1, 2, 3 or 4"
msgstr "0, 1, 2, 3, 4를 예상"

#: eeschema/sch_io/ltspice/ltspice_schematic.cpp:429
msgid "Expecting NORMAL or WIDE"
msgstr "NORMAL 또는 WIDE 필요"

#: eeschema/sch_io/ltspice/ltspice_schematic.cpp:447
msgid "Expecting I, O, B, IN, OUT or BIDIR"
msgstr "I, O, B, IN, OUT, BIDIR를 예상"

#: eeschema/sch_io/ltspice/ltspice_schematic.cpp:468
msgid "Expecting R0, R90, R18, R270, M0, M90, M180 or M270"
msgstr "R0, R90, R18, R270, M0, M90, M180 또는 M270 필요"

#: eeschema/sch_io/ltspice/ltspice_schematic.cpp:490
msgid ""
"Expecting LEFT, CENTER, RIGHT, TOP, BOTTOM, VLEFT, VRIGHT, VCENTER, VTOP or "
"VBOTTOM"
msgstr ""
"LEFT, CENTER, RIGHT, TOP, BOTTOM, VLEFT, VRIGHT, VCENTER, VTOP, VBOTTOM를 예"
"상"

#: eeschema/sch_io/ltspice/ltspice_schematic.cpp:512
msgid ""
"Expecting NONE, BOTTOM, TOP, LEFT, RIGHT, VBOTTOM, VTOP, VCENTER, VLEFT or "
"VRIGHT"
msgstr ""
"NONE, BOTTOM, TOP, LEFT, RIGHT, VBOTTOM, VTOP, VCENTER, VLEFT, VRIGHT를 예상"

#: eeschema/sch_io/ltspice/ltspice_schematic.cpp:526
msgid "Expecting CELL or BLOCK"
msgstr "CELL 또는 BLOCK 필요"

#: eeschema/sch_io/ltspice/ltspice_schematic.cpp:545
#, c-format
msgid "Symbol '%s.asy' not found"
msgstr "심볼 '%s.asy'를 찾을 수 없음"

#: eeschema/sch_io/ltspice/sch_io_ltspice.h:49
msgid "LTspice schematic files"
msgstr "LTspice 회로도 파일"

#: eeschema/sch_io/sch_io_mgr.cpp:43 pcbnew/pcb_io/pcb_io_mgr.cpp:49
#, c-format
msgid "Plugin \"%s\" does not implement the \"%s\" function."
msgstr "플러그인 \"%s\"에는 \"%s\" 기능이 구현되어 있지 않습니다."

#: eeschema/sch_io/sch_io_mgr.cpp:44 pcbnew/pcb_io/pcb_io_mgr.cpp:50
#, c-format
msgid "Plugin type \"%s\" is not found."
msgstr "플러그인 타입 \"%s\"을 찾을 수 없습니다."

#: eeschema/sch_io/sch_io_mgr.cpp:100
#, c-format
msgid "Unknown SCH_FILE_T value: %d"
msgstr "알 수 없는 SCH_FILE_T 값: %d"

#: eeschema/sch_item.cpp:381
#: gerbview/dialogs/dialog_select_one_pcb_layer.cpp:151
#: pcbnew/board_connected_item.cpp:168 pcbnew/board_connected_item.cpp:171
#: pcbnew/board_item.cpp:340
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:75
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:27
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:59
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:59
#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:57
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:50
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:100
#: pcbnew/footprint.cpp:3483 pcbnew/footprint.cpp:3486
#: pcbnew/fp_text_grid_table.cpp:144
#: pcbnew/generators/pcb_tuning_pattern.cpp:1942 pcbnew/pad.cpp:1003
#: pcbnew/pad.cpp:1917 pcbnew/pcb_dimension.cpp:462
#: pcbnew/pcb_dimension.cpp:1197 pcbnew/pcb_marker.cpp:361
#: pcbnew/pcb_reference_image.cpp:261 pcbnew/pcb_reference_image.cpp:346
#: pcbnew/pcb_shape.cpp:478 pcbnew/pcb_shape.cpp:664 pcbnew/pcb_shape.cpp:666
#: pcbnew/pcb_target.cpp:153 pcbnew/pcb_text.cpp:237 pcbnew/pcb_textbox.cpp:363
#: pcbnew/pcb_track.cpp:1072 pcbnew/pcb_track.cpp:1139
#: pcbnew/pcb_track.cpp:1517 pcbnew/pcb_track.cpp:1524
#: pcbnew/tools/board_inspection_tool.cpp:236
#: pcbnew/tools/drawing_stackup_table_tool.cpp:214
#: pcbnew/tools/drawing_stackup_table_tool.cpp:225
#: pcbnew/widgets/pcb_properties_panel.cpp:254
#: pcbnew/widgets/pcb_properties_panel.cpp:255
#: pcbnew/widgets/pcb_properties_panel.cpp:259
#: pcbnew/widgets/search_handlers.cpp:84 pcbnew/widgets/search_handlers.cpp:142
#: pcbnew/widgets/search_handlers.cpp:207 pcbnew/zone.cpp:622
#: pcbnew/zone.cpp:1623 pcbnew/zone.cpp:1624
msgid "Layer"
msgstr "레이어"

#: eeschema/sch_item.cpp:388 pcbnew/board_item.cpp:342
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:127
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:164
#: pcbnew/dialogs/dialog_group_properties_base.cpp:40
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:52
#: pcbnew/dialogs/dialog_reference_image_properties_base.cpp:61
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:58
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:229
#: pcbnew/dialogs/dialog_text_properties_base.cpp:83
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:73
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:58
#: pcbnew/footprint.cpp:1312 pcbnew/pad.cpp:999 pcbnew/pcb_dimension.cpp:460
#: pcbnew/pcb_group.cpp:386 pcbnew/pcb_marker.cpp:364 pcbnew/pcb_shape.cpp:474
#: pcbnew/pcb_text.cpp:232 pcbnew/pcb_textbox.cpp:361 pcbnew/pcb_track.cpp:1181
#: pcbnew/tools/generator_tool.cpp:47 pcbnew/zone.cpp:591
msgid "Locked"
msgstr "잠김"

#: eeschema/sch_junction.cpp:291 pcbnew/microwave/microwave_polygon.cpp:135
#: pcbnew/pcb_target.cpp:155 pcbnew/pcb_target.cpp:238
msgid "Size"
msgstr "크기"

#: eeschema/sch_junction.cpp:364
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:104 pcbnew/pad.cpp:1027
#: pcbnew/pcb_track.cpp:1140 pcbnew/pcb_track.cpp:1520
msgid "Diameter"
msgstr "직경"

#: eeschema/sch_label.cpp:149
msgid "Tri-State"
msgstr "3-상태"

#: eeschema/sch_label.cpp:1189
msgid "Hierarchical Sheet Pin"
msgstr "계층 시트 핀"

#: eeschema/sch_label.cpp:1217 eeschema/sch_text.cpp:424
msgid "Justification"
msgstr "위치 맞춤"

#: eeschema/sch_label.cpp:1305 eeschema/sch_line.cpp:898
#: pcbnew/board_connected_item.cpp:173
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:39
#: pcbnew/dialogs/dialog_net_inspector.cpp:984
#: pcbnew/generators/pcb_tuning_pattern.cpp:445
#: pcbnew/generators/pcb_tuning_pattern.cpp:1936 pcbnew/pad.cpp:993
#: pcbnew/pad.cpp:1945 pcbnew/pcb_shape.cpp:697 pcbnew/pcb_track.cpp:1161
#: pcbnew/tools/pcb_control.cpp:1675
#: pcbnew/widgets/pcb_properties_panel.cpp:267
#: pcbnew/widgets/search_handlers.cpp:141 pcbnew/zone.cpp:577
#: pcbnew/zone.cpp:1630
msgid "Net"
msgstr "네트"

#: eeschema/sch_label.cpp:1308 eeschema/sch_line.cpp:902
msgid "Resolved netclass"
msgstr "확인된 네트클래스"

#: eeschema/sch_label.cpp:1325
msgid "Hierarchical Labels"
msgstr "계층 라벨"

#: eeschema/sch_label.cpp:1427
#, c-format
msgid "Label '%s'"
msgstr "라벨 '%s'"

#: eeschema/sch_label.cpp:1695
#, c-format
msgid "Directive Label [%s %s]"
msgstr "지시문 레이블 [%s %s]"

#: eeschema/sch_label.cpp:1905
#, c-format
msgid "Global Label '%s'"
msgstr "전역 라벨 '%s'"

#: eeschema/sch_label.cpp:2039
#, c-format
msgid "Hierarchical Label '%s'"
msgstr "계층 라벨 '%s'"

#: eeschema/sch_label.cpp:2151
msgid "Pin length"
msgstr "핀 길이"

#: eeschema/sch_line.cpp:99
msgid "Graphic Line"
msgstr "그래픽 라인"

#: eeschema/sch_line.cpp:743
#, c-format
msgid "Vertical Wire, length %s"
msgstr "수직선, 길이 %s"

#: eeschema/sch_line.cpp:744
#, c-format
msgid "Vertical Bus, length %s"
msgstr "수직 버스, 길이 %s"

#: eeschema/sch_line.cpp:745
#, c-format
msgid "Vertical Graphic Line, length %s"
msgstr "수직 그래픽 라인, 길이 %s"

#: eeschema/sch_line.cpp:752
#, c-format
msgid "Horizontal Wire, length %s"
msgstr "수평 도선, 길이 %s"

#: eeschema/sch_line.cpp:753
#, c-format
msgid "Horizontal Bus, length %s"
msgstr "수평 버스, 길이 %s"

#: eeschema/sch_line.cpp:754
#, c-format
msgid "Horizontal Graphic Line, length %s"
msgstr "수평 그래픽 선, 길이 %s"

#: eeschema/sch_line.cpp:761
#, c-format
msgid "Wire, length %s"
msgstr "선, 길이 %s"

#: eeschema/sch_line.cpp:762
#, c-format
msgid "Bus, length %s"
msgstr "버스, 길이 %s"

#: eeschema/sch_line.cpp:763
#, c-format
msgid "Graphic Line, length %s"
msgstr "그래픽 라인, 길이 %s"

#: eeschema/sch_line.cpp:937
msgid "Graphical"
msgstr "그래픽"

#: eeschema/sch_line.cpp:940
msgid "Line Type"
msgstr "라인 종류"

#: eeschema/sch_line.cpp:945
msgid "from netclass"
msgstr "네트클래스로부터"

#: eeschema/sch_marker.cpp:275
msgid "Electrical Rule Check Error"
msgstr "전기 규칙 검사 오류"

#: eeschema/sch_marker.h:100
msgid "ERC Marker"
msgstr "ERC 마커"

#: eeschema/sch_no_connect.h:97 eeschema/tools/sch_edit_tool.cpp:195
msgid "No Connect"
msgstr "연결 없음"

#: eeschema/sch_plotter.cpp:213 pcbnew/pcbnew_jobs_handler.cpp:461
#, c-format
msgid "Plotted to '%s'.\n"
msgstr "'%s'에 플롯됨.\n"

#: eeschema/sch_plotter.cpp:215 eeschema/sch_plotter.cpp:401
#: eeschema/sch_plotter.cpp:748 eeschema/sch_plotter.cpp:920
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias.cpp:174
#: pcbnew/dialogs/dialog_plot.cpp:1267
#: pcbnew/exporters/gendrill_Excellon_writer.cpp:155
#: pcbnew/exporters/gendrill_gerber_writer.cpp:129
msgid "Done."
msgstr "완료."

#: eeschema/sch_plotter.cpp:375 eeschema/sch_plotter.cpp:532
#: eeschema/sch_plotter.cpp:723 eeschema/sch_plotter.cpp:891
#: pcbnew/dialogs/dialog_plot.cpp:1244
#, c-format
msgid "Plotted to '%s'."
msgstr "'%s'에 플롯됨."

#: eeschema/sch_plotter.cpp:551
msgid "Done"
msgstr "완료"

#: eeschema/sch_plotter.cpp:1017
#, c-format
msgid "Failed to write plot files to folder '%s'."
msgstr "폴더 '%s'에 플롯 파일을 쓸 수 없습니다."

#: eeschema/sch_reference_list.cpp:674
#, c-format
msgid "Item not annotated: %s%s (unit %d)"
msgstr "주석이 없는 항목: %s%s (단위 %d)"

#: eeschema/sch_reference_list.cpp:681
#, c-format
msgid "Item not annotated: %s%s"
msgstr "주석이 없는 항목: %s%s"

#: eeschema/sch_reference_list.cpp:699
#, c-format
msgid "Error: symbol %s%s%s (unit %d) exceeds units defined (%d)"
msgstr "오류: 심볼 %s%s%s (유닛 %d)가 정의된 유닛 개수 (%d) 를 초과하였음"

#: eeschema/sch_reference_list.cpp:738
#, c-format
msgid "Duplicate items %s%s%s\n"
msgstr "중복된 항목 %s%s%s\n"

#: eeschema/sch_reference_list.cpp:763
#, c-format
msgid "Differing unit counts for item %s%s%s and %s%s%s\n"
msgstr "항목 %s%s%s 및 %s%s%s의 단위 수가 다릅니다.\n"

#: eeschema/sch_reference_list.cpp:779
#, c-format
msgid "Different values for %s%d%s (%s) and %s%d%s (%s)"
msgstr "서로 다른 값 : %s%d%s (%s) 과 %s%d%s (%s)"

#: eeschema/sch_screen.cpp:914 eeschema/sch_screen.cpp:1006
#, c-format
msgid "Setting schematic symbol '%s %s' library identifier to '%s'."
msgstr "회로도 심볼 '%s %s'의 라이브러리 식별자를 '%s'(으)로 설정합니다."

#: eeschema/sch_screen.cpp:930
#, c-format
msgid ""
"Schematic symbol reference '%s' library identifier is not valid. Unable to "
"link library symbol."
msgstr ""
"회로도 심볼 참조 '%s' 라이브러리 식별자는 유효하지 않습니다. 라이브러리 심볼"
"을 연결할 수 없습니다."

#: eeschema/sch_screen.cpp:946
#, c-format
msgid ""
"Symbol library '%s' not found and no fallback cache library available.  "
"Unable to link library symbol."
msgstr ""
"심볼 라이브러리 '%s'을(를) 찾을 수 없으며, 사용가능한 폴백 캐시 라이브러리가 "
"없습니다.  라이브러리 심볼을 연결할 수 없습니다."

#: eeschema/sch_screen.cpp:965
#, c-format
msgid "I/O error %s resolving library symbol %s"
msgstr "I/O 오류 %s 발생 (라이브러리 심볼 %s 확인 중)"

#: eeschema/sch_screen.cpp:985
#, c-format
msgid "Falling back to cache to set symbol '%s:%s' link '%s'."
msgstr "심볼 '%s:%s'을(를) 연결 '%s'(으)로 설정하기 위해 캐시로 대체합니다."

#: eeschema/sch_screen.cpp:1017
#, c-format
msgid "No library symbol found for schematic symbol '%s %s'."
msgstr "회로도 심볼 '%s %s'의 라이브러리 심볼을 찾지 못했습니다."

#: eeschema/sch_shape.cpp:437
#, c-format
msgid "Arc, radius %s"
msgstr "호, 반지름 %s"

#: eeschema/sch_shape.cpp:441
#, c-format
msgid "Circle, radius %s"
msgstr "원, 반지름 %s"

#: eeschema/sch_shape.cpp:450
#, c-format
msgid "Polyline, %d points"
msgstr "폴리선, %d개 점"

#: eeschema/sch_shape.cpp:454
#, c-format
msgid "Bezier Curve, %d points"
msgstr "베지어 곡선, %d 포인트"

#: eeschema/sch_sheet.cpp:805 eeschema/sch_sheet.cpp:1504
msgid "Sheet Name"
msgstr "시트 이름"

#: eeschema/sch_sheet.cpp:813
msgid "Hierarchical Path"
msgstr "계층 경로"

#: eeschema/sch_sheet.cpp:817
msgid "File Name"
msgstr "파일 이름"

#: eeschema/sch_sheet.cpp:1075
#, c-format
msgid "Hierarchical Sheet %s"
msgstr "계층 시트 %s"

#: eeschema/sch_sheet.cpp:1507 pcbnew/pcb_textbox.cpp:694
msgid "Border Width"
msgstr "테두리 너비"

#: eeschema/sch_sheet.cpp:1511
msgid "Border Color"
msgstr "테두리 색상"

#: eeschema/sch_sheet.cpp:1514
msgid "Background Color"
msgstr "배경색"

#: eeschema/sch_sheet_path.cpp:57 include/board_item.h:415
msgid "(Deleted Item)"
msgstr "(삭제된 항목)"

#: eeschema/sch_sheet_pin.cpp:338
#, c-format
msgid "Hierarchical Sheet Pin %s"
msgstr "계층 시트 핀 %s"

#: eeschema/sch_symbol.cpp:1431
msgid "Excluded from BOM"
msgstr "BOM에서 제외됨"

#: eeschema/sch_symbol.cpp:1437
msgid "Excluded from board"
msgstr "기판에서 제외됨"

#: eeschema/sch_symbol.cpp:1443
msgid "Excluded from simulation"
msgstr "시뮬레이션에서 제외"

#: eeschema/sch_symbol.cpp:1449 eeschema/sch_symbol.cpp:1881
#: eeschema/widgets/search_handlers.cpp:139 pcbnew/footprint.cpp:1327
msgid "DNP"
msgstr "DNP"

#: eeschema/sch_symbol.cpp:1872 eeschema/sch_text.cpp:407
#: eeschema/sch_textbox.cpp:448
msgid "Simulation"
msgstr "시뮬레이션"

#: eeschema/sch_symbol.cpp:1875
msgid "BOM"
msgstr "BOM"

#: eeschema/sch_symbol.cpp:1887 eeschema/sch_text.cpp:407
#: eeschema/sch_textbox.cpp:448
msgid "Exclude from"
msgstr "다음에서 제외"

#: eeschema/sch_symbol.cpp:1898
msgid "Power symbol"
msgstr "전원 심볼"

#: eeschema/sch_symbol.cpp:1915
msgid "flags"
msgstr "플래그"

#: eeschema/sch_symbol.cpp:1920
msgid "Missing parent"
msgstr "상위 항목 존재하지 않음"

#: eeschema/sch_symbol.cpp:1935
msgid "Undefined!!!"
msgstr "정의되어 있지 않습니다!!!"

#: eeschema/sch_symbol.cpp:1943
msgid "<Unknown>"
msgstr "<알 수 없음>"

#: eeschema/sch_symbol.cpp:1966
msgid "No library defined!"
msgstr "정의된 라이브러리가 없음!"

#: eeschema/sch_symbol.cpp:1968
#, c-format
msgid "Symbol not found in %s!"
msgstr "%s에서 심볼을 찾을 수 없음!"

#: eeschema/sch_symbol.cpp:2159
#, c-format
msgid "Symbol %s [%s]"
msgstr "심볼 %s [%s]"

#: eeschema/sch_symbol.cpp:2673
msgid "Mirror X"
msgstr "미러 X"

#: eeschema/sch_symbol.cpp:2675
msgid "Mirror Y"
msgstr "미러 Y"

#: eeschema/sch_symbol.cpp:2717 pcbnew/footprint.cpp:3501
msgid "Library Link"
msgstr "라이브러리 링크"

#: eeschema/sch_symbol.cpp:2720 pcbnew/footprint.cpp:3504
#: pcbnew/plot_board_layers.cpp:114
msgid "Library Description"
msgstr "라이브러리 설명"

#: eeschema/sch_symbol.cpp:2729
msgid "Exclude From Board"
msgstr "기판에서 제외"

#: eeschema/sch_symbol.cpp:2732
msgid "Exclude From Simulation"
msgstr "시뮬레이션에서 제외"

#: eeschema/sch_symbol.cpp:2735 pcbnew/footprint.cpp:3518
msgid "Exclude From Bill of Materials"
msgstr "BOM에서 제외"

#: eeschema/sch_symbol.cpp:2738 pcbnew/footprint.cpp:3521
msgid "Do not Populate"
msgstr "부착하지 않음"

#: eeschema/sch_text.cpp:404
msgid "Graphic Text"
msgstr "그래픽 텍스트"

#: eeschema/sch_text.cpp:420
msgid "Align center"
msgstr "가운데 맞춤"

#: eeschema/sch_text_help_md.h:2
msgid ""
"<table>\n"
"    <tr>\n"
"        <th>Markup</th>\n"
"        <th></th>\n"
"        <th>Result</th>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>^{superscript}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp><sup>superscript</sup>&nbsp;</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>Driver Board^{Rev A}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>Driver Board<sup>Rev A</sup></samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td><br></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>_{subscript}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp><sub>subscript</sub>&nbsp;</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>D_{0} - D_{15}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>D<sub>0</sub> - D<sub>15</sub></samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td> &nbsp;<br><samp>~{overbar}</samp><br> &nbsp;<br><samp>~{CLK}</"
"samp></td>\n"
"        <td></td>\n"
"        <td> <samp><u>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</u></"
"samp><br> <samp>overbar</samp><br> <samp><u>&nbsp;&nbsp;&nbsp;</u></"
"samp><br> <samp>CLK</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>${variable}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp><i>variable_value</i></samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>${REVISION}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>2020.1</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td><br></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>${refdes:field}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp><i>field_value</i> of symbol <i>refdes</i></"
"samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>${R3:VALUE}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>150K</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td><br></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td><br></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <th>Bus Definition</th>\n"
"        <th>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;"
"&nbsp;&nbsp;&nbsp;</th>\n"
"        <th>Resultant Nets</th>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>prefix[m..n]</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>prefixm to prefixn</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>D[0..7]</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>D0, D1, D2, D3, D4, D5, D6, D7</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td><br></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>{net1 net2 ...}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>net1, net2, ...</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>{SCL SDA}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>SCL, SDA</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td><br></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>prefix{net1 net2 ...}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>prefix.net1, prefix.net2, ...</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>USB1{D+ D-}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>USB1.D+, USB1.D-</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td><br></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>MEM{D[1..2] LATCH}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br> <samp>MEM.D1, MEM.D2, MEM.LATCH</samp> </td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>MEM{D_{[1..2]} ~{LATCH}}</samp></td>\n"
"        <td></td>\n"
"        <td> <samp>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<sub>&nbsp;</sub>&nbsp; "
"&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<sub>&nbsp;</sub>&nbsp; &nbsp;&nbsp;&nbsp;"
"&nbsp;<u>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</u></samp><br> <samp>MEM.D<sub>1</"
"sub>, MEM.D<sub>2</sub>, MEM.LATCH</samp> </td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td><br></td>\n"
"    </tr>\n"
"</table>\n"
"<p></p>\n"
"<p></p>\n"
"<i>Note that markup has precedence over bus definitions.</i>\n"
"\n"
msgstr ""
"<table>\n"
"    <tr>\n"
"        <th>마크업</th>\n"
"        <th></th>\n"
"        <th>결과</th>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>^{위 첨자}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp><sup>위 첨자</sup>&nbsp;</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>구동 보드^{Rev A}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>구동 보드<sup>Rev A</sup></samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td><br></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>_{아래 첨자}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp><sub>아래 첨자</sub>&nbsp;</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>D_{0} - D_{15}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>D<sub>0</sub> - D<sub>15</sub></samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td> &nbsp;<br><samp>~{윗줄}</samp><br> &nbsp;<br><samp>~{CLK}</"
"samp></td>\n"
"        <td></td>\n"
"        <td> <samp><u>&nbsp;&nbsp;&nbsp;&nbsp;</u></samp><br> <samp>윗줄</"
"samp><br> <samp><u>&nbsp;&nbsp;&nbsp;</u></samp><br> <samp>CLK</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>${변수}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp><i>변수_값</i></samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>${개정}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>2020.1</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td><br></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>${참조지정자:필드}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>심볼의 <i>참조 지정자 필드_값</i></samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>${R3:값}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>150K</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td><br></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td><br></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <th>버스 정의</th>\n"
"        <th>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;"
"&nbsp;&nbsp;&nbsp;</th>\n"
"        <th>생성된 네트</th>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>접두사[m..n]</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>접두사m 에서 접두사n까지</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>D[0..7]</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>D0, D1, D2, D3, D4, D5, D6, D7</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td><br></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>{네트1 네트2 ...}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>네트1, 네트2, ...</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>{SCL SDA}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>SCL, SDA</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td><br></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>접두사{네트1 네트2 ...}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>접두사.네트1, 접두사.네트2, ...</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>USB1{D+ D-}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br><samp>USB1.D+, USB1.D-</samp></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td><br></td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>MEM{D[1..2] LATCH}</samp></td>\n"
"        <td></td>\n"
"        <td>&nbsp;<br> <samp>MEM.D1, MEM.D2, MEM.LATCH</samp> </td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td>&nbsp;<br><samp>MEM{D_{[1..2]} ~{LATCH}}</samp></td>\n"
"        <td></td>\n"
"        <td> <samp>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<sub>&nbsp;</sub>&nbsp; "
"&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<sub>&nbsp;</sub>&nbsp; &nbsp;&nbsp;&nbsp;"
"&nbsp;<u>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</u></samp><br> <samp>MEM.D<sub>1</"
"sub>, MEM.D<sub>2</sub>, MEM.LATCH</samp> </td>\n"
"    </tr>\n"
"    <tr>\n"
"        <td><br></td>\n"
"    </tr>\n"
"</table>\n"
"<p></p>\n"
"<p></p>\n"
"<i>마크업은 버스 정의보다 우선합니다.</i>\n"
"\n"

#: eeschema/sch_validators.cpp:59
msgid "Signal name contains '{' and '}' but is not a valid bus name"
msgstr "신호 이름이 '{'와 '}'를 포함하지만 유효한 버스 이름이 아닙니다"

#: eeschema/sch_validators.cpp:64
msgid "Signal name contains '[' or ']' but is not a valid bus name."
msgstr "신호 이름이 '[' 또는 ']'을 포함하지만 유효한 버스 이름이 아닙니다."

#: eeschema/sheet.cpp:71
#, c-format
msgid ""
"The sheet changes cannot be made because the destination sheet already has "
"the sheet '%s' or one of its subsheets as a parent somewhere in the "
"schematic hierarchy."
msgstr ""
"목적지 시트는 이미 회로도 계층 어딘가에서 '%s' 시트 또는 해당 시트의 하위 시"
"트 중 하나를 상위 시트로 가지고 있기 때문에 시트 변경 사항은 적용될 수 없습니"
"다."

#: eeschema/sheet.cpp:92
#, c-format
msgid ""
"The schematic '%s' has not had its symbol library links remapped to the "
"symbol library table.  The project this schematic belongs to must first be "
"remapped before it can be imported into the current project."
msgstr ""
"회로도 '%s'은(는) 아직 심볼 라이브러리 링크를 심볼 라이브러리 테이블에 매핑하"
"지 않았습니다. 이것을 현재 프로젝트로 가져올 수 있도록, 회로도가 포함된 프로"
"젝트가 가장 먼저 매핑되어야 합니다."

#: eeschema/sheet.cpp:210
msgid ""
"The entire schematic could not be loaded.  Errors occurred attempting to "
"load hierarchical sheet schematics."
msgstr ""
"전체 회로도를 불러올 수 없습니다.  계층 시트 회로도를 불러오는 중에 오류가 발"
"생하였습니다."

#: eeschema/sheet.cpp:213
msgid "Schematic Load Error"
msgstr "회로도 불러오기 오류"

#: eeschema/sheet.cpp:216
msgid "Use partial schematic"
msgstr "부분적인 회로도를 사용하시오"

#: eeschema/sheet.cpp:295
msgid "Continue Load"
msgstr "계속 불러오기"

#: eeschema/sheet.cpp:296
msgid "Cancel Load"
msgstr "불러오기 취소"

#: eeschema/sheet.cpp:305
msgid ""
"There are hierarchical sheets in the loaded schematic file from an older "
"file version resulting in  missing symbol instance data.  This will result "
"in all of the symbols in the loaded schematic to use either the default "
"instance setting or fall back to the library symbol settings.  Loading the "
"project that uses this schematic file and saving to the lastest file version "
"will resolve this issue.\n"
"\n"
"Do you wish to continue?"
msgstr ""
"이전 파일 버전에서 로드된 회로도 파일에 계층 시트가 있어 심볼 인스턴스 데이터"
"가 누락되었습니다. 이렇게 하면 로드된 회로도의 모든 심볼이 기본 인스턴스 설정"
"을 사용하거나 라이브러리 심볼 설정으로 대체됩니다. 이 회로도 파일을 사용하는 "
"프로젝트를 로드하고 최신 파일 버전으로 저장하면 이 문제가 해결됩니다.\n"
"\n"
"계속하시겠습니까?"

#: eeschema/sheet.cpp:312 eeschema/sheet.cpp:340 eeschema/sheet.cpp:381
#: eeschema/sheet.cpp:430 eeschema/sheet.cpp:491
msgid "Continue Load Schematic"
msgstr "회로도 불러오기 계속 진행"

#: eeschema/sheet.cpp:336
msgid ""
"There are library names in the selected schematic that are missing from the "
"current project library table.  This may result in broken symbol library "
"references for the loaded schematic.\n"
"\n"
"Do you wish to continue?"
msgstr ""
"불러온 회로도에 포함된 라이브러리 이름 중의 일부가 프로젝트 라이브러리 테이블"
"에 존재하지 않습니다.  이는 회로도의 심볼 라이브러리 링크를 손상시킵니다. \n"
"\n"
" 계속하시겠습니까?"

#: eeschema/sheet.cpp:377
msgid ""
"The selected file was created as part of a different project.  Linking the "
"file to this project may result in missing or incorrect symbol library "
"references.\n"
"\n"
"Do you wish to continue?"
msgstr ""
"선택한 파일이 다른 프로젝트의 일부로 생성되었습니다. 이 프로젝트에 파일을 링"
"크하면 심볼 라이브러리 참조가 누락되거나 올바르지 않을 수 있습니다.\n"
"\n"
"계속하시겠습니까?"

#: eeschema/sheet.cpp:426
msgid ""
"There are symbol library names in the selected schematic that are missing "
"from the selected schematic project library table.  This may result in "
"broken symbol library references.\n"
"\n"
"Do you wish to continue?"
msgstr ""
"불러온 회로도에 포함된 라이브러리 이름 중의 일부가 회로도 프로젝트 라이브러"
"리 테이블에 존재하지 않습니다. 이는 회로도의 심볼 라이브러리 링크를 손상시킵"
"니다. \n"
"\n"
" 계속하시겠습니까?"

#: eeschema/sheet.cpp:487
msgid ""
"A duplicate library name that references a different library exists in the "
"current library table.  This conflict cannot be resolved and may result in "
"broken symbol library references.\n"
"\n"
"Do you wish to continue?"
msgstr ""
"현재 라이브러리 테이블에 서로 다른 라이브러리를 가리키는 중복된 라이브러리 이"
"름이 존재합니다.  이 충돌은 해결될 수 없으며, 회로도의 심볼 라이브러리 링크"
"를 손상시킵니다. \n"
"\n"
"계속하시겠습니까?"

#: eeschema/sheet.cpp:700
#, c-format
msgid ""
"The file name '%s' can cause issues with an existing file name\n"
"already defined in the schematic on systems that support case\n"
"insensitive file names.  This will cause issues if you copy this\n"
"project to an operating system that supports case insensitive file\n"
"names.\n"
"\n"
"Do you wish to continue?"
msgstr ""
"파일 이름 '%s'은(는) 대소문자를 구분하지 않는 파일 이름을 지원하는\n"
"시스템의 회로도에서 이미 정의된 기존 파일 이름과 문제를 일으킬\n"
"수 있습니다.  만약 이 프로젝트를 대소문자를 구분하지 않는 파일\n"
"이름을 지원하는 운영 체제에 복사할 경우 문제가 생길 가능성이\n"
"높습니다.\n"
"\n"
"계속하시겠습니까?"

#: eeschema/sheet.cpp:709
msgid "Do not show this message again."
msgstr "이 메시지를 다시 표시하지 마십시오."

#: eeschema/sheet.cpp:710
msgid "Create New Sheet"
msgstr "새 시트 만들기"

#: eeschema/sheet.cpp:711
msgid "Discard New Sheet"
msgstr "새로운 시트 버리기"

#: eeschema/sim/kibis/ibis_parser.cpp:67 eeschema/sim/kibis/ibis_parser.cpp:96
#: eeschema/sim/kibis/ibis_parser.cpp:119
msgid "Dimension of matrices should be >= 1."
msgstr "매트릭스의 차원은 >= 1이어야 합니다."

#: eeschema/sim/kibis/ibis_parser.cpp:73
msgid "Bandwidth of banded matrices should be >= 1."
msgstr "밴딩 매트릭스의 대역폭은 >= 1이어야합니다."

#: eeschema/sim/kibis/ibis_parser.cpp:81 eeschema/sim/kibis/ibis_parser.cpp:104
#: eeschema/sim/kibis/ibis_parser.cpp:127
msgid "There are NaN elements in a matrix."
msgstr "행렬에는 NaN 요소가 있습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:162
msgid "Invalid R_pkg value."
msgstr "잘못된 R_pkg 값입니다."

#: eeschema/sim/kibis/ibis_parser.cpp:167
msgid "Invalid L_pkg value."
msgstr "잘못된 L_pkg 값입니다."

#: eeschema/sim/kibis/ibis_parser.cpp:172
msgid "Invalid C_pkg value."
msgstr "잘못된 C_pkg 값입니다."

#: eeschema/sim/kibis/ibis_parser.cpp:186
msgid "Checking pin "
msgstr "핀 확인 중 "

#: eeschema/sim/kibis/ibis_parser.cpp:193
msgid "Pin name cannot be empty."
msgstr "Pin 이름은 비워둘 수 없습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:201
msgid "Signal name cannot be empty."
msgstr "신호 이름은 비워둘 수 없습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:209
msgid "Model name cannot be empty."
msgstr "모델 이름은 비워둘 수 없습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:217
msgid "Rpin is not valid."
msgstr "Rpin이 유효하지 않습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:225
msgid "Lpin is not valid."
msgstr "Lpin이 유효하지 않습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:233
msgid "Cpin is not valid."
msgstr "Cpin이 유효하지 않습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:247
msgid "Checking component "
msgstr "Component 확인 중 "

#: eeschema/sim/kibis/ibis_parser.cpp:254
msgid "Component: name cannot be empty."
msgstr "컴포넌트: 이름은 비워 둘 수 없음."

#: eeschema/sim/kibis/ibis_parser.cpp:263
msgid "Component: manufacturer cannot be empty."
msgstr "Component: 제조업체는 비어있을 수 없습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:272
msgid "Component: invalid package."
msgstr "컴포넌트: 잘못된 패키지."

#: eeschema/sim/kibis/ibis_parser.cpp:281
msgid "Component: no pin"
msgstr "Component: 핀 없음"

#: eeschema/sim/kibis/ibis_parser.cpp:378
msgid "Cannot interpolate the current based on this IV table."
msgstr "이 IV 테이블을 기반으로는 전류를 보간(Interpolate)할 수 없습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:396
msgid "There is an invalid voltage in an IV table"
msgstr "IV 테이블에 잘못된 전압이 있음"

#: eeschema/sim/kibis/ibis_parser.cpp:403
msgid "There is an invalid current in an IV table"
msgstr "IV 테이블에 무효 전류가 있습니다"

#: eeschema/sim/kibis/ibis_parser.cpp:446
msgid "Invalid R_load."
msgstr "잘못된 R_load."

#: eeschema/sim/kibis/ibis_parser.cpp:450
msgid "Invalid falling dV/dt."
msgstr "잘못된 하강 dV/dt."

#: eeschema/sim/kibis/ibis_parser.cpp:455
msgid "Invalid rising dV/dt."
msgstr "잘못된 상승 dV/dt."

#: eeschema/sim/kibis/ibis_parser.cpp:470
msgid "Model name cannot be empty"
msgstr "모델 이름은 비워둘 수 없습니다"

#: eeschema/sim/kibis/ibis_parser.cpp:475
msgid "Checking model "
msgstr "모델 확인 중 "

#: eeschema/sim/kibis/ibis_parser.cpp:482
msgid "Undefined model type."
msgstr "정의되지 않은 모델 유형."

#: eeschema/sim/kibis/ibis_parser.cpp:491
msgid "Invalid Vinh value."
msgstr "잘못된 Vinh 값입니다."

#: eeschema/sim/kibis/ibis_parser.cpp:499
msgid "Invalid Vinl value."
msgstr "잘못된 Vinh 값입니다."

#: eeschema/sim/kibis/ibis_parser.cpp:507
msgid "Invalid R_ref value."
msgstr "잘못된 R_ref 값입니다."

#: eeschema/sim/kibis/ibis_parser.cpp:515
msgid "Invalid C_ref value."
msgstr "잘못된 C_ref 값입니다."

#: eeschema/sim/kibis/ibis_parser.cpp:523
msgid "Invalid V_ref value."
msgstr "잘못된 V_ref 값."

#: eeschema/sim/kibis/ibis_parser.cpp:531
msgid "Invalid V_meas value."
msgstr "잘못된 V_meas 값."

#: eeschema/sim/kibis/ibis_parser.cpp:539
msgid "C_comp is invalid."
msgstr "C_comp는 유효하지 않습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:547
msgid "Temperature Range is invalid."
msgstr "온도 범위가 잘못되었습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:572
msgid "Voltage Range is invalid."
msgstr "전압 범위가 잘못되었습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:578
msgid "Invalid pulldown."
msgstr "잘못된 풀다운입니다."

#: eeschema/sim/kibis/ibis_parser.cpp:583
msgid "Invalid pullup."
msgstr "잘못된 풀업입니다."

#: eeschema/sim/kibis/ibis_parser.cpp:588
msgid "Invalid POWER clamp."
msgstr "잘못된 전원 클램프입니다."

#: eeschema/sim/kibis/ibis_parser.cpp:593
msgid "Invalid GND clamp."
msgstr "잘못된 GND 클램프입니다."

#: eeschema/sim/kibis/ibis_parser.cpp:602
msgid "Invalid Ramp"
msgstr "잘못된 Ramp"

#: eeschema/sim/kibis/ibis_parser.cpp:613
msgid "Checking Header..."
msgstr "헤더 확인 중..."

#: eeschema/sim/kibis/ibis_parser.cpp:620
msgid "Missing [IBIS Ver]"
msgstr "누락 [IBIS Ver]"

#: eeschema/sim/kibis/ibis_parser.cpp:629
msgid "The parser does not handle this IBIS version"
msgstr "이 파서는 해당 IBIS 버전을 처리하지 않습니다"

#: eeschema/sim/kibis/ibis_parser.cpp:638
msgid "Missing [File Rev]"
msgstr "[파일 개정판] 누락"

#: eeschema/sim/kibis/ibis_parser.cpp:647
msgid "Missing [File Name]"
msgstr "[파일 이름] 누락"

#: eeschema/sim/kibis/ibis_parser.cpp:673
msgid "Package model name cannot be empty."
msgstr "패키지 모델 이름은 비워둘 수 없습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:678
msgid "Checking package model "
msgstr "패키지 모델 확인중 "

#: eeschema/sim/kibis/ibis_parser.cpp:685
msgid "Manufacturer cannot be empty."
msgstr "제조업체 항목은 비워둘 수 없습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:694
msgid "OEM cannot be empty."
msgstr "OEM은 비워둘 수 없습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:703
msgid "Negative number of pins."
msgstr "핀 개수가 음수입니다."

#: eeschema/sim/kibis/ibis_parser.cpp:723
msgid "Empty pin number."
msgstr "핀번호가 비었음."

#: eeschema/sim/kibis/ibis_parser.cpp:734
msgid "Resistance matrix is incorrect."
msgstr "저항 행렬이 올바르지 않음."

#: eeschema/sim/kibis/ibis_parser.cpp:745
msgid "Capacitance matrix is undefined."
msgstr "커패시턴스 행렬이 정의되지 않음."

#: eeschema/sim/kibis/ibis_parser.cpp:754
msgid "Capacitance matrix is incorrect."
msgstr "커패시턴스 행렬이 올바르지 않음."

#: eeschema/sim/kibis/ibis_parser.cpp:763
msgid "Capacitance matrix is nullptr."
msgstr "커패시턴스 행렬이 널 포인터임."

#: eeschema/sim/kibis/ibis_parser.cpp:774
msgid "Inductance matrix is undefined."
msgstr "인덕턴스 행렬이 정의되지 않음."

#: eeschema/sim/kibis/ibis_parser.cpp:783
msgid "Inductance matrix is incorrect."
msgstr "인덕턴스 행렬이 올바르지 않음."

#: eeschema/sim/kibis/ibis_parser.cpp:792
msgid "Inductance matrix is nullptr."
msgstr "인덕턴스 행렬이 널 포인터임."

#: eeschema/sim/kibis/ibis_parser.cpp:808
msgid "Cannot open file "
msgstr "파일을 열 수 없습니다 "

#: eeschema/sim/kibis/ibis_parser.cpp:832
msgid "Unexpected end of file. Missing [END] ?"
msgstr "예기치 않은 EOF(end of file). [END]가 없습니까 ?"

#: eeschema/sim/kibis/ibis_parser.cpp:844
msgid "Error on line "
msgstr "오류 라인 "

#: eeschema/sim/kibis/ibis_parser.cpp:872
msgid "A line did not end properly."
msgstr "줄이 제대로 끝나지 않았습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:1008
#: eeschema/sim/kibis/ibis_parser.cpp:1025
msgid "Line exceeds maximum length."
msgstr "선이 최대 길이를 초과합니다."

#: eeschema/sim/kibis/ibis_parser.cpp:1051
msgid "Failed to read a double."
msgstr "실수형 읽기 실패."

#: eeschema/sim/kibis/ibis_parser.cpp:1057
#: eeschema/sim/kibis/ibis_parser.cpp:1101
msgid "Failed to read a word."
msgstr "단어를 읽지 못했습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:1094
msgid "Number is not an integer"
msgstr "숫자가 정수가 아닙니다"

#: eeschema/sim/kibis/ibis_parser.cpp:1188
msgid "New comment character is invalid."
msgstr "새 주석 문자가 잘못되었습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:1201
msgid "Invalid syntax. Should be |_char or &_char, etc..."
msgstr "잘못된 구문입니다. |_char 또는 &_char 등의 형식이어야합니다."

#: eeschema/sim/kibis/ibis_parser.cpp:1212
msgid "No extra argument was expected"
msgstr "추가 인수를 필요로 하지 않음"

#: eeschema/sim/kibis/ibis_parser.cpp:1364
msgid "Unknown keyword in "
msgstr "알 수 없는 키워드 "

#: eeschema/sim/kibis/ibis_parser.cpp:1364
msgid " context: "
msgstr " 문맥: "

#: eeschema/sim/kibis/ibis_parser.cpp:1430
msgid "Invalid ramp data"
msgstr "잘못된 램프 데이터"

#: eeschema/sim/kibis/ibis_parser.cpp:1530
msgid "Cannot specify a bandwidth for that kind of matrix"
msgstr "해당 종류의 매트릭스에 대한 대역폭을 지정할 수 없습니다"

#: eeschema/sim/kibis/ibis_parser.cpp:1549
msgid "Invalid row in matrix"
msgstr "행렬의 행이 잘못되었습니다"

#: eeschema/sim/kibis/ibis_parser.cpp:1579
msgid "Too much data for this matrix row."
msgstr "행렬의 행에 대한 데이터가 너무 많습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:1587
msgid "Too much data for this matrix."
msgstr "행렬에 대한 데이터가 너무 많습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:1592
#: eeschema/sim/kibis/ibis_parser.cpp:1625
msgid "Can't read a matrix element"
msgstr "행렬 요소를 읽을 수 없습니다"

#: eeschema/sim/kibis/ibis_parser.cpp:1630
msgid "Can't read a matrix index"
msgstr "행렬의 인덱스를 읽을 수 없습니다"

#: eeschema/sim/kibis/ibis_parser.cpp:1698
msgid "Unknown matrix type"
msgstr "알 수 없는 행렬 유형"

#: eeschema/sim/kibis/ibis_parser.cpp:1706
msgid "Missing matrix type"
msgstr "행렬 유형이 누락되었습니다"

#: eeschema/sim/kibis/ibis_parser.cpp:1712
msgid " Matrix is already init. But m_continue was not set ( internal error )"
msgstr ""
" 매트릭스가 이미 초기화되었습니다. 그러나 m_continue가 설정되지 않았습니다 "
"(내부 오류)"

#: eeschema/sim/kibis/ibis_parser.cpp:1738
msgid "Tried to read a row from an undefined matrix"
msgstr "정의되지 않은 행렬에서 행을 읽으려고 했습니다"

#: eeschema/sim/kibis/ibis_parser.cpp:1744
msgid "matrix pointer is null"
msgstr "행렬 포인터가 null입니다"

#: eeschema/sim/kibis/ibis_parser.cpp:1893
msgid "Typ-Min-Max Values requires at least Typ."
msgstr "Typ-Min-Max 값에는 최소한 Typ가 필요합니다."

#: eeschema/sim/kibis/ibis_parser.cpp:1986
msgid "Unknown Model_type "
msgstr "알 수 없는 모델_타입 "

#: eeschema/sim/kibis/ibis_parser.cpp:1993
msgid "Internal Error while reading model_type"
msgstr "model_type을 읽는 동안 내부 오류가 발생"

#: eeschema/sim/kibis/ibis_parser.cpp:2008
msgid "Unknown Enable: "
msgstr "알수 없는 활성화: "

#: eeschema/sim/kibis/ibis_parser.cpp:2015
#: eeschema/sim/kibis/ibis_parser.cpp:2037
msgid "Internal Error while reading Enable"
msgstr "읽는 도중 발생한 내부 오류"

#: eeschema/sim/kibis/ibis_parser.cpp:2030
msgid "Unknown polarity "
msgstr "알 수 없는 극성 "

#: eeschema/sim/kibis/ibis_parser.cpp:2067
msgid "Continued reading a model that did not begin. ( internal error )"
msgstr "시작되지 않은 모델 읽기를 계속 했습니다. (내부 오류)"

#: eeschema/sim/kibis/ibis_parser.cpp:2234
msgid "A [Package] line requires exactly 4 elements."
msgstr "1개의 [Package] 행에는 정확히 4개의 요소가 필요합니다."

#: eeschema/sim/kibis/ibis_parser.cpp:2287
msgid "Invalid pin entry: 6 values from a table with only 3."
msgstr "잘못된 핀 항목: 3개짜리 테이블에 6개의 값이 있습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:2297
msgid "Can't read a R, L or C value for a pin."
msgstr "핀에 대한 R, L 또는 C 값을 읽을 수 없습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:2320
msgid "Invalid field name in [Pin]"
msgstr "잘못된 필드 이름 [Pin]"

#: eeschema/sim/kibis/ibis_parser.cpp:2327
msgid "Missing argument in [Pin]"
msgstr "[Pin]에 인수 누락"

#: eeschema/sim/kibis/ibis_parser.cpp:2362
msgid "Wrong number of columns for pin mapping."
msgstr "핀 매핑에 대한 열 수가 잘못되었습니다."

#: eeschema/sim/kibis/ibis_parser.cpp:2402
msgid "Incorrect diff pin name"
msgstr "잘못된 차동 핀 이름"

#: eeschema/sim/kibis/ibis_parser.cpp:2407
msgid "Incorrect inv_pin name"
msgstr "잘못된 inv_pin 이름"

#: eeschema/sim/kibis/ibis_parser.cpp:2487
msgid "Unknown waveform type"
msgstr "알 수 없는 파형 유형"

#: eeschema/sim/kibis/ibis_parser.cpp:2498
msgid "Internal error detected, a waveform should exist"
msgstr "내부 오류가 감지되었습니다. 파형(waveform)이 있어야 합니다"

#: eeschema/sim/kibis/ibis_parser.cpp:2563
msgid "Internal error: Bad parser context."
msgstr "내부 오류: 잘못된 parser 문맥입니다."

#: eeschema/sim/kibis/ibis_parser.cpp:2601
msgid "Missing keyword."
msgstr "키워드가 없음."

#: eeschema/sim/kibis/kibis.cpp:455
msgid "waveform has less than two points"
msgstr "파형에 2개 미만의 포인트가 있습니다"

#: eeschema/sim/kibis/kibis.cpp:674 eeschema/sim/kibis/kibis.cpp:739
msgid "Cannot remove temporary output file"
msgstr "임시 출력 파일을 제거할 수 없음"

#: eeschema/sim/kibis/kibis.cpp:725
msgid "Error while reading temporary file"
msgstr "임시 파일을 읽는 중 오류 발생"

#: eeschema/sim/kibis/kibis.cpp:734
msgid "Error while creating temporary output file"
msgstr "임시 출력 파일을 생성하는 동안 오류가 발생됨"

#: eeschema/sim/kibis/kibis.cpp:771
msgid ""
"Kibis does not support DUT values yet. https://ibis.org/summits/nov16a/chen."
"pdf"
msgstr ""
"Kibis는 아직 DUT 값을 지원하지 않습니다. https://ibis.org/summits/nov16a/"
"chen.pdf"

#: eeschema/sim/kibis/kibis.cpp:874
msgid "Model has only one waveform pair, reduced accuracy"
msgstr "모델에는 하나의 파형쌍(waveform pair)만 있어 정확도가 감소함"

#: eeschema/sim/kibis/kibis.cpp:894 eeschema/sim/kibis/kibis.cpp:1099
msgid "Driver needs at least a pullup or a pulldown"
msgstr "드라이버는 최소한 풀업 또는 풀다운이 필요"

#: eeschema/sim/kibis/kibis.cpp:1082 eeschema/sim/kibis/kibis.cpp:1091
msgid ""
"There are two waveform pairs, but only one transistor. More equations than "
"unknowns."
msgstr ""
"2개의 파형이 있지만 트랜지스터는 1개입니다. 알수 없는 더 많은 방정식이 있습니"
"다."

#: eeschema/sim/kibis/kibis.cpp:1199
msgid "Model has no waveform pair, using [Ramp] instead, poor accuracy"
msgstr "모델에는 파형 쌍이 없습니다, 대신 [Ramp]를 사용, 낮은 정확도"

#: eeschema/sim/kibis/kibis.cpp:1212
msgid "Model has more than 2 waveform pairs, using the first two."
msgstr "모델에는 처음 2 개를 사용하여 2개 이상의 파형 쌍이 있습니다."

#: eeschema/sim/kibis/kibis.cpp:1250
msgid "Invalid model type for a driver."
msgstr "드라이버에 대한 잘못된 모델 유형입니다."

#: eeschema/sim/kibis/kibis.cpp:1302
msgid "Invalid model type for a device"
msgstr "디바이스에 대한 잘못된 모델"

#: eeschema/sim/kibis/kibis.cpp:1522 eeschema/sim/kibis/kibis.cpp:1568
msgid "Number of cycles should be greater than 0."
msgstr "주기 간격은 0보다 커야 합니다."

#: eeschema/sim/kibis/kibis.cpp:1528 eeschema/sim/kibis/kibis.cpp:1574
msgid "ON time should be greater than 0."
msgstr "ON 시간은 0보다 커야 합니다."

#: eeschema/sim/kibis/kibis.cpp:1534 eeschema/sim/kibis/kibis.cpp:1580
msgid "OFF time should be greater than 0."
msgstr "OFF 시간은 0보다 커야 합니다."

#: eeschema/sim/kibis/kibis.cpp:1542
msgid "Rising edge is longer than on time."
msgstr "상승 에지(edge)가 ON time보다 더 깁니다."

#: eeschema/sim/kibis/kibis.cpp:1551
msgid "Falling edge is longer than off time."
msgstr "하강 에지(Edge)가 OFF time보다 더 깁니다."

#: eeschema/sim/kibis/kibis.cpp:1588
msgid "Rising edge is longer than ON time."
msgstr "상승 에지가 ON 시간보다 더 길다."

#: eeschema/sim/kibis/kibis.cpp:1596
msgid "Falling edge is longer than OFF time."
msgstr "하강 에지가 OFF 시간보다 더 길다."

#: eeschema/sim/kibis/kibis.cpp:1610 eeschema/sim/kibis/kibis.cpp:1641
msgid "Bitrate should be greater than 0."
msgstr "비트 전송률은 0보다 커야 한다."

#: eeschema/sim/kibis/kibis.cpp:1616 eeschema/sim/kibis/kibis.cpp:1647
msgid "Number of bits should be greater than 0."
msgstr "비트 수는 0보다 커야 한다."

#: eeschema/sim/kibis/kibis.cpp:1628
msgid "Bitrate is too high for rising / falling edges"
msgstr "비트 전송률이 상승/하강 에지에 비해 너무 높음"

#: eeschema/sim/kibis/kibis.cpp:1655
msgid "Bitrate could be too high for rising / falling edges"
msgstr "비트 전송률이 상승/하강 에지에 비해 너무 높을 수 있음"

#: eeschema/sim/legacy_workbook.cpp:118
#, c-format
msgid "Error loading workbook: line %d: %s."
msgstr "통합 문서 로드 중 오류: %d 줄: %s."

#: eeschema/sim/legacy_workbook.cpp:133
msgid "expecting version"
msgstr "예상 버전"

#: eeschema/sim/legacy_workbook.cpp:150
msgid "expecting simulation tab count"
msgstr "예상 시뮬레이션 탭 개수"

#: eeschema/sim/legacy_workbook.cpp:164
msgid "expecting simulation tab type"
msgstr "예상되는 시뮬레이션 탭 유형"

#: eeschema/sim/legacy_workbook.cpp:210
msgid "expecting trace count"
msgstr "예상 트래이스 수"

#: eeschema/sim/legacy_workbook.cpp:226
msgid "expecting trace type"
msgstr "예상 트레이스 유형"

#: eeschema/sim/legacy_workbook.cpp:236
msgid "expecting trace name"
msgstr "예상되는 트레이스 이름"

#: eeschema/sim/legacy_workbook.cpp:246
msgid "expecting trace color"
msgstr "트레이스 색상 예상"

#: eeschema/sim/legacy_workbook.cpp:262
msgid "expecting measurement count"
msgstr "예상 측정 횟수"

#: eeschema/sim/legacy_workbook.cpp:274
msgid "expecting measurement definition"
msgstr "예상 측정 정의"

#: eeschema/sim/legacy_workbook.cpp:284
msgid "expecting measurement format definition"
msgstr "측정 형식 정의 요구"

#: eeschema/sim/sim_lib_mgr.cpp:83
#, c-format
msgid "Simulation model library not found at '%s'"
msgstr "'%s' 에서 시뮬레이션 모델 라이브러리를 찾을 수 없음"

#: eeschema/sim/sim_lib_mgr.cpp:88
#, c-format
msgid "Simulation model library not found at '%s' or '%s'"
msgstr "시뮬레이션 모델 라이브러리를 '%s' 또는 '%s'에서 찾을 수 없음"

#: eeschema/sim/sim_lib_mgr.cpp:316
#, c-format
msgid "Error loading simulation model library '%s': %s"
msgstr "시뮬레이션 모델 라이브러리 '%s'를로드 중 오류 발생: %s"

#: eeschema/sim/sim_lib_mgr.cpp:325
#, c-format
msgid "Error loading simulation model: no '%s' field"
msgstr "시뮬레이션 모델 로드 오류: '%s' 필드 없음"

#: eeschema/sim/sim_lib_mgr.cpp:330
#: pcbnew/dialogs/dialog_board_statistics.cpp:453
#: pcbnew/dialogs/dialog_board_statistics.cpp:454
#: pcbnew/dialogs/dialog_board_statistics.cpp:455
#: pcbnew/dialogs/dialog_board_statistics.cpp:686
#: pcbnew/dialogs/dialog_board_statistics.cpp:687
#: pcbnew/dialogs/dialog_board_statistics.cpp:688
#: pcbnew/generators/pcb_tuning_pattern.cpp:1331
msgid "unknown"
msgstr "알 수 없음"

#: eeschema/sim/sim_lib_mgr.cpp:339
#, c-format
msgid ""
"Error loading simulation model: could not find base model '%s' in library "
"'%s'"
msgstr ""
"시뮬레이션 모델 로드 오류: '%s' 라이브러리에서 기본 모델 '%s'를 찾을 수 없음"

#: eeschema/sim/sim_library_kibis.cpp:39 eeschema/sim/sim_model_kibis.cpp:76
#, c-format
msgid "Invalid IBIS file '%s'"
msgstr "잘못된 IBIS 파일 '%s'"

#: eeschema/sim/sim_model.cpp:414
#, c-format
msgid "No simulation model definition found for symbol '%s'."
msgstr "심볼 '%s'에 대한 시뮬레이션 모델 정의를 찾을 수 없습니다."

#: eeschema/sim/sim_model.cpp:421
msgid "No simulation model definition found."
msgstr "시뮬레이션 모델 정의를 찾을 수 없음."

#: eeschema/sim/sim_model.cpp:553 eeschema/sim/sim_model.cpp:612
#, c-format
msgid ""
"Error reading simulation model from symbol '%s':\n"
"%s"
msgstr ""
"심볼 '%s'에서 시뮬레이션 모델을 읽는 중 오류 발생:\n"
"%s"

#: eeschema/sim/sim_model.cpp:790
#, c-format
msgid "Unknown simulation model pin '%s'"
msgstr "알 수 없는 시뮬레이션 모델 핀 '%s'"

#: eeschema/sim/sim_model_kibis.cpp:81
#, c-format
msgid "Could not find IBIS component '%s'"
msgstr "IBIS 컴포넌트를 찾을 수 없습니다 ‘%s’"

#: eeschema/sim/sim_model_kibis.cpp:87
#, c-format
msgid "Invalid IBIS component '%s'"
msgstr "잘못된 IBIS 구성 요소 '%s'"

#: eeschema/sim/sim_model_kibis.cpp:91
#, c-format
msgid "Could not find IBIS pin '%s' in component '%s'"
msgstr "IBIS 핀 %s를 구성 요소 %s에서 찾을 수 없습니다"

#: eeschema/sim/sim_model_kibis.cpp:98
#, c-format
msgid "Invalid IBIS pin '%s' in component '%s'"
msgstr "잘못된 IBIS 핀 %s 구성 요소 %s"

#: eeschema/sim/sim_model_kibis.cpp:106
#, c-format
msgid "Could not find IBIS model '%s'"
msgstr "IBIS 모델을 찾을 수 없습니다’ %s‘"

#: eeschema/sim/sim_model_kibis.cpp:109
#, c-format
msgid "Invalid IBIS model '%s'"
msgstr "잘못된 IBIS 모델 '%s'"

#: eeschema/sim/sim_model_kibis.cpp:333
msgid "Power supply"
msgstr "전원 공급 장치"

#: eeschema/sim/sim_model_kibis.cpp:343
msgid "Parasitic pin resistance"
msgstr "기생 핀 저항"

#: eeschema/sim/sim_model_kibis.cpp:353
msgid "Parasitic pin inductance"
msgstr "기생 핀 인덕턴스"

#: eeschema/sim/sim_model_kibis.cpp:363
msgid "Parasitic pin capacitance"
msgstr "기생 핀 커패시턴스"

#: eeschema/sim/sim_model_kibis.cpp:407
msgid "DC Value"
msgstr "직류 값"

#: eeschema/sim/sim_model_kibis.cpp:425
msgid "ON time"
msgstr "ON 시간"

#: eeschema/sim/sim_model_kibis.cpp:433
msgid "OFF time"
msgstr "꺼짐 시간"

#: eeschema/sim/sim_model_kibis.cpp:441 eeschema/sim/sim_model_kibis.cpp:474
msgid "Delay"
msgstr "지연"

#: eeschema/sim/sim_model_kibis.cpp:449
msgid "Number of cycles"
msgstr "주기의 수"

#: eeschema/sim/sim_model_kibis.cpp:466
msgid "Bitrate"
msgstr "비트 전송률"

#: eeschema/sim/sim_model_kibis.cpp:482
msgid "Number of bits"
msgstr "비트 수"

#: eeschema/sim/sim_plot_tab.cpp:324
#, c-format
msgid "%d"
msgstr "%d"

#: eeschema/sim/sim_plot_tab.cpp:582
msgid "Amplitude"
msgstr "진폭"

#: eeschema/sim/sim_plot_tab.cpp:614
msgid "Noise (V/√Hz)"
msgstr "노이즈 (V/√Hz)"

#: eeschema/sim/sim_plot_tab.cpp:617
msgid "Noise (A/√Hz)"
msgstr "노이즈 (A/√Hz)"

#: eeschema/sim/sim_plot_tab.cpp:634
msgid "Intensity"
msgstr "강도"

#: eeschema/sim/sim_plot_tab.cpp:669 eeschema/sim/sim_plot_tab.cpp:782
msgid "Power"
msgstr "전원"

#: eeschema/sim/sim_plot_tab.cpp:724
msgid "Voltage (swept)"
msgstr "전압 (swept)"

#: eeschema/sim/sim_plot_tab.cpp:735
msgid "Current (swept)"
msgstr "전류 (swept)"

#: eeschema/sim/sim_plot_tab.cpp:746
msgid "Resistance (swept)"
msgstr "저항 (swept)"

#: eeschema/sim/sim_plot_tab.cpp:757
msgid "Temperature (swept)"
msgstr "온도 (swept)"

#: eeschema/sim/sim_plot_tab.cpp:775
msgid "Voltage (measured)"
msgstr "전압 (측정됨)"

#: eeschema/sim/sim_plot_tab.h:146 eeschema/sim/simulator_frame_ui.cpp:214
#: eeschema/sim/simulator_frame_ui.cpp:726
#: eeschema/sim/simulator_frame_ui.cpp:830
#: eeschema/sim/simulator_frame_ui.cpp:998
msgid " (gain)"
msgstr " (게인)"

#: eeschema/sim/sim_plot_tab.h:148 eeschema/sim/simulator_frame_ui.cpp:211
#: eeschema/sim/simulator_frame_ui.cpp:727
#: eeschema/sim/simulator_frame_ui.cpp:732
#: eeschema/sim/simulator_frame_ui.cpp:831
#: eeschema/sim/simulator_frame_ui.cpp:836
#: eeschema/sim/simulator_frame_ui.cpp:999
msgid " (phase)"
msgstr " (상)"

#: eeschema/sim/sim_tab.cpp:87 eeschema/sim/sim_tab.cpp:104
msgid ""
"Simulation provided no plots. Please refer to console window for results."
msgstr ""
"이 시뮬레이션이 제공하는 플롯이 없습니다. 결과를 확인하려면 콘솔 창을 참조하"
"세요."

#: eeschema/sim/simulator_frame.cpp:111
#: eeschema/sim/toolbars_simulator_frame.cpp:107
#: eeschema/tools/ee_actions.cpp:67
msgid "Simulator"
msgstr "시뮬레이터"

#: eeschema/sim/simulator_frame.cpp:332
msgid "Spice Simulator"
msgstr "Spice 시뮬레이터"

#: eeschema/sim/simulator_frame.cpp:344
msgid "Simulator requires a fully annotated schematic."
msgstr "시뮬레이터는 완전히 주석 처리된 회로도가 필요합니다."

#: eeschema/sim/simulator_frame.cpp:353 eeschema/sim/simulator_frame.cpp:368
#: eeschema/sim/simulator_frame.cpp:556 eeschema/tools/simulator_control.cpp:75
msgid ""
"Errors during netlist generation.\n"
"\n"
msgstr ""
"네트리스트 생성 중 오류.\n"
"\n"

#: eeschema/sim/simulator_frame.cpp:390
msgid ""
"You must run a TRAN simulation first; its resultswill be used for the fast "
"Fourier transform."
msgstr ""
"먼저 TRAN 시뮬레이션을 실행해야 합니다. 그 결과는 고속 푸리에 변환에 사용됩니"
"다."

#: eeschema/sim/simulator_frame.cpp:422
msgid ""
"Schematic sheet simulation command directive has changed.  Do you wish to "
"update the Simulation Command?"
msgstr ""
"회로도 시트 시뮬레이션 명령 지시문이 변경되었습니다.   시뮬레이션 명령을 업데"
"이트하시겠습니까?"

#: eeschema/sim/simulator_frame.cpp:444 eeschema/sim/simulator_frame.cpp:788
msgid "Another simulation is already running."
msgstr "다른 시뮬레이션이 이미 실행 중입니다."

#: eeschema/sim/simulator_frame.cpp:591
msgid "Save changes to workbook?"
msgstr "통합 문서에 변경 내용을 저장하시겠습니까?"

#: eeschema/sim/simulator_frame_ui.cpp:145
msgid "Measure Min"
msgstr "최소 측정값"

#: eeschema/sim/simulator_frame_ui.cpp:146
msgid "Measure Max"
msgstr "최대 측정값"

#: eeschema/sim/simulator_frame_ui.cpp:147
msgid "Measure Average"
msgstr "평균 측정값"

#: eeschema/sim/simulator_frame_ui.cpp:148
msgid "Measure RMS"
msgstr "RMS 측정"

#: eeschema/sim/simulator_frame_ui.cpp:149
msgid "Measure Peak-to-peak"
msgstr "피크-피크 측정"

#: eeschema/sim/simulator_frame_ui.cpp:153
msgid "Measure Frequency of Min"
msgstr "최소 주파수 측정"

#: eeschema/sim/simulator_frame_ui.cpp:154
msgid "Measure Frequency of Max"
msgstr "최대 주파수 측정"

#: eeschema/sim/simulator_frame_ui.cpp:158
msgid "Measure Time of Min"
msgstr "최소 시간 측정"

#: eeschema/sim/simulator_frame_ui.cpp:159
msgid "Measure Time of Max"
msgstr "최대 시간 측정"

#: eeschema/sim/simulator_frame_ui.cpp:162
msgid "Measure Integral"
msgstr "적분 측정"

#: eeschema/sim/simulator_frame_ui.cpp:167
msgid "Perform Fourier Analysis..."
msgstr "푸리에 분석 수행..."

#: eeschema/sim/simulator_frame_ui.cpp:214
#: eeschema/sim/simulator_frame_ui.cpp:731
#: eeschema/sim/simulator_frame_ui.cpp:835
#: eeschema/sim/simulator_frame_ui.cpp:997
msgid " (amplitude)"
msgstr " (진폭)"

#: eeschema/sim/simulator_frame_ui.cpp:271
#, c-format
msgid "Fourier Analysis of %s"
msgstr "%s의 푸리에 분석"

#: eeschema/sim/simulator_frame_ui.cpp:273
msgid "Fourier Analyses of Multiple Signals"
msgstr "다중 신호의 푸리에 해석"

#: eeschema/sim/simulator_frame_ui.cpp:275
msgid "Fundamental frequency:"
msgstr "기본 주파수:"

#: eeschema/sim/simulator_frame_ui.cpp:323
#, c-format
msgid "Format %s..."
msgstr "형식 %s..."

#: eeschema/sim/simulator_frame_ui.cpp:398
msgid "Format Value..."
msgstr "서식 값..."

#: eeschema/sim/simulator_frame_ui.cpp:401
msgid "Delete Measurement"
msgstr "측정 항목 삭제"

#: eeschema/sim/simulator_frame_ui.cpp:582
#: eeschema/sim/simulator_frame_ui.cpp:953
#, c-format
msgid "Analysis %u - "
msgstr "분석 %u - "

#: eeschema/sim/simulator_frame_ui.cpp:589
#: eeschema/sim/simulator_frame_ui.cpp:596
#: eeschema/sim/simulator_frame_ui_base.cpp:111
#: eeschema/sim/simulator_frame_ui_base.cpp:168
msgid "Signal"
msgstr "신호"

#: eeschema/sim/simulator_frame_ui.cpp:592
#: eeschema/sim/simulator_frame_ui_base.cpp:114
msgid "Cursor 1"
msgstr "커서 1"

#: eeschema/sim/simulator_frame_ui.cpp:593
#: eeschema/sim/simulator_frame_ui_base.cpp:115
msgid "Cursor 2"
msgstr "커서 2"

#: eeschema/sim/simulator_frame_ui.cpp:1148
#: eeschema/sim/simulator_frame_ui.cpp:2545
msgid "Diff"
msgstr "차동쌍"

#: eeschema/sim/simulator_frame_ui.cpp:1407
#: eeschema/sim/simulator_frame_ui.cpp:1420
#: eeschema/sim/simulator_frame_ui.cpp:1863
msgid "Could not apply tuned value(s):"
msgstr "조정된 값을 적용할 수 없음:"

#: eeschema/sim/simulator_frame_ui.cpp:1421
#: eeschema/sim/simulator_frame_ui.cpp:1853
#, c-format
msgid "%s is not tunable"
msgstr "%s는 조정할 수 없음"

#: eeschema/sim/simulator_frame_ui.cpp:1505
msgid "Error: no current simulation.\n"
msgstr "오류: 현재 시뮬레이션 없음.\n"

#: eeschema/sim/simulator_frame_ui.cpp:1514
msgid "Error: simulation type not defined.\n"
msgstr "오류: 시뮬레이션 유형이 정의되지 않음.\n"

#: eeschema/sim/simulator_frame_ui.cpp:1520
msgid "Error: simulation type doesn't support plotting.\n"
msgstr "오류: 시뮬레이션 유형이 플로팅을 지원하지 않음.\n"

#: eeschema/sim/simulator_frame_ui.cpp:2648
#: eeschema/sim/simulator_frame_ui.cpp:2763
#: eeschema/sim/simulator_frame_ui.cpp:2803
msgid ""
"\n"
"\n"
"Simulation results:\n"
"\n"
msgstr ""
"\n"
"\n"
"시뮬레이션 결과:\n"
"\n"

#: eeschema/sim/simulator_frame_ui_base.cpp:221
msgid "Measurement"
msgstr "측정"

#: eeschema/sim/simulator_frame_ui_base.cpp:223
#: gerbview/gerber_file_image.cpp:337
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:51
msgid "Format"
msgstr "형식"

#: eeschema/sim/spice_library_parser.cpp:166
#, c-format
msgid "Cannot create sim model from %s"
msgstr "%s에서 sim 모델을 생성할 수 없음"

#: eeschema/sim/spice_model_parser.cpp:85
#: eeschema/sim/spice_model_parser.cpp:187
#, c-format
msgid "Could not find model '%s' to copy for \"A Kind Of\" model '%s'"
msgstr "복사할 모델 '%s''를 \"A Kind Of\" 모델 '%s'에서 찾을 수 없음"

#: eeschema/sim/spice_simulator.cpp:57
msgid "DC Operating Point"
msgstr "DC 동작점"

#: eeschema/sim/spice_simulator.cpp:58
msgid "Small-Signal Analysis"
msgstr "소신호 분석"

#: eeschema/sim/spice_simulator.cpp:59
msgid "DC Sweep Analysis"
msgstr "DC 스윕 분석"

#: eeschema/sim/spice_simulator.cpp:60
msgid "Transient Analysis"
msgstr "과도 해석"

#: eeschema/sim/spice_simulator.cpp:61
msgid "Small-Signal Distortion Analysis"
msgstr "소신호 왜곡 분석"

#: eeschema/sim/spice_simulator.cpp:62
msgid "Noise Analysis"
msgstr "잡음 분석"

#: eeschema/sim/spice_simulator.cpp:63
msgid "Pole-Zero Analysis"
msgstr "극-영점 분석"

#: eeschema/sim/spice_simulator.cpp:64
msgid "Sensitivity Analysis"
msgstr "감도 분석"

#: eeschema/sim/spice_simulator.cpp:65
msgid "Transfer Function Analysis"
msgstr "전달 함수 해석"

#: eeschema/sim/spice_simulator.cpp:66
msgid "S-Parameter Analysis"
msgstr "S-파라미터 분석"

#: eeschema/sim/spice_simulator.cpp:67
msgid "Frequency Content Analysis"
msgstr "주파수 내용 분석"

#: eeschema/sim/spice_value.cpp:378
msgid "Please, fill required fields"
msgstr "필요한 필드를 채워주세요"

#: eeschema/sim/spice_value.cpp:396
#, c-format
msgid "'%s' is not a valid Spice value."
msgstr "'%s'은(는) 유효한 Spice 값이 아닙니다."

#: eeschema/sim/toolbars_simulator_frame.cpp:162
msgid "&Simulation"
msgstr "시뮬레이션(&S)"

#: eeschema/sim/user_defined_signals_help_md.h:2
msgid ""
"SPICE functions:\n"
"\n"
"    sqrt(x)\n"
"    sin(x)\n"
"    cos(x)\n"
"    tan(x)\n"
"    sinh(x)\n"
"    cosh(x)\n"
"    tanh(x)\n"
"    asin(x)\n"
"    acos(x)\n"
"    atan(x)\n"
"    asinh(x)\n"
"    acosh(x)\n"
"    atanh(x)\n"
"    arctan(x)\n"
"    exp(x)\n"
"    ln(x)\n"
"    log(x)\n"
"    abs(x)\n"
"    nint(x)\n"
"    int(x)\n"
"    floor(x)\n"
"    ceil(x)\n"
"    pow(x, y)\n"
"    pwr(x, y)\n"
"    min(x, y)\n"
"    max(x, y)\n"
"    sgn(x)\n"
"    ternary_fcn(x, y, z)\n"
"    gauss(nom, rvar, sigma)\n"
"    agauss(nom, avar, sigma)\n"
"    unif(nom, rvar)\n"
"    aunif(nom, avar)\n"
"    limit(nom, avar)\n"
msgstr ""
"SPICE 함수:\n"
"\n"
"    sqrt(x)\n"
"    sin(x)\n"
"    cos(x)\n"
"    tan(x)\n"
"    sinh(x)\n"
"    cosh(x)\n"
"    tanh(x)\n"
"    asin(x)\n"
"    acos(x)\n"
"    atan(x)\n"
"    asinh(x)\n"
"    acosh(x)\n"
"    atanh(x)\n"
"    arctan(x)\n"
"    exp(x)\n"
"    ln(x)\n"
"    log(x)\n"
"    abs(x)\n"
"    nint(x)\n"
"    int(x)\n"
"    floor(x)\n"
"    ceil(x)\n"
"    pow(x, y)\n"
"    pwr(x, y)\n"
"    min(x, y)\n"
"    max(x, y)\n"
"    sgn(x)\n"
"    ternary_fcn(x, y, z)\n"
"    gauss(nom, rvar, sigma)\n"
"    agauss(nom, avar, sigma)\n"
"    unif(nom, rvar)\n"
"    aunif(nom, avar)\n"
"    limit(nom, avar)\n"

#: eeschema/symbol_async_loader.cpp:108
#, c-format
msgid "Loading library %s..."
msgstr "로딩 라이브러리 %s..."

#: eeschema/symbol_async_loader.cpp:122 eeschema/symbol_async_loader.cpp:130
#, c-format
msgid ""
"Error loading symbol library %s.\n"
"\n"
"%s\n"
msgstr ""
"%s 심볼 라이브러리 로딩 오류.\n"
"\n"
"%s\n"

#: eeschema/symbol_checker.cpp:66
#, c-format
msgid ""
"<b>Warning: reference prefix</b><br>prefix ending by '%s' can create issues "
"if saved in a symbol library"
msgstr ""
"<b>경고: 참조 접두사</b><br>'%s'로 끝나는 접두사는 기호 라이브러리에 저장할 "
"경우 문제를 일으킬 수 있음"

#: eeschema/symbol_checker.cpp:118
#, c-format
msgid ""
"<b>Duplicate pin %s</b> %s at location <b>(%s, %s)</b> conflicts with pin "
"%s%s at location <b>(%s, %s)</b> in %s body style."
msgstr ""
"<b> 중복되는 핀 %s</b> %s 위치 <b>(%s, %s)</b> 가 핀 %s%s 위치 <b>(%s, %s)</"
"b> 와 충돌함 %s 본체 유형."

#: eeschema/symbol_checker.cpp:133
#, c-format
msgid ""
"<b>Duplicate pin %s</b> %s at location <b>(%s, %s)</b> conflicts with pin "
"%s%s at location <b>(%s, %s)</b> in units %s and %s of %s body style."
msgstr ""
"<b> 중복되는 핀 %s</b> %s 위치 <b>(%s, %s)</b> 가 핀 %s%s 위치 <b>(%s, %s)</"
"b> 와 충돌함 %s와 %s에서 %s의 본체 유형."

#: eeschema/symbol_checker.cpp:153
#, c-format
msgid ""
"<b>Duplicate pin %s</b> %s at location <b>(%s, %s)</b> conflicts with pin "
"%s%s at location <b>(%s, %s)</b>."
msgstr ""
"<b> 중복되는 핀 %s</b> %s (위치 <b>(%s, %s)</b>) 이(가) 핀 %s%s (위치 "
"<b>(%s, %s)</b>) 와 충돌합니다."

#: eeschema/symbol_checker.cpp:166
#, c-format
msgid ""
"<b>Duplicate pin %s</b> %s at location <b>(%s, %s)</b> conflicts with pin "
"%s%s at location <b>(%s, %s)</b> in units %s and %s."
msgstr ""
"<b> 중복되는 핀 %s</b> %s (위치 <b>(%s, %s)</b>) 가 핀 %s%s (위치 <b>(%s, "
"%s)</b>) 와 충돌합니다 (유닛 %s와 %s)."

#: eeschema/symbol_checker.cpp:194
msgid "<b>A Power Symbol should have only one unit</b><br><br>"
msgstr "<b>전원 심볼에는 하나의 유닛만 있어야 함</b><br><br>"

#: eeschema/symbol_checker.cpp:200
#, fuzzy
msgid "<b>A Power Symbol should not have DeMorgan variants</b><br><br>"
msgstr "<b>전원 심볼에는 핀이 하나만 있어야 함</b><br><br>"

#: eeschema/symbol_checker.cpp:206
msgid "<b>A Power Symbol should have only one pin</b><br><br>"
msgstr "<b>전원 심볼에는 핀이 하나만 있어야 함</b><br><br>"

#: eeschema/symbol_checker.cpp:215
msgid ""
"<b>Suspicious Power Symbol</b><br>Only an input or output power pin has "
"meaning<br><br>"
msgstr ""
"<b>의미 없는 전원 심볼은</b><br>입력 또는 출력 전원 핀에만 의미가 있음"
"<br><br>"

#: eeschema/symbol_checker.cpp:222
msgid ""
"<b>Suspicious Power Symbol</b><br>Invisible input power pins are no longer "
"required<br><br>"
msgstr ""
"<b>의미없는 전원 심볼</b><br>보이지 않는 입력 전원 핀은 없어도 됨<br><br>"

#: eeschema/symbol_checker.cpp:247
#, c-format
msgid ""
"Info: <b>Hidden power pin %s</b> %s at location <b>(%s, %s)</b> in %s body "
"style."
msgstr ""
"<b>숨은 전원 핀 %s</b> %s이(가) 위치 <b>(%s, %s)</b> %s 본체 유형에 있음."

#: eeschema/symbol_checker.cpp:257
#, c-format
msgid ""
"Info: <b>Hidden power pin %s</b> %s at location <b>(%s, %s)</b> in unit %c "
"of %s body style."
msgstr ""
"<b>숨은 전원 핀 %s</b> %s이(가) 위치 <b>(%s, %s)</b> %c 유닛에 %s 본체 유형"
"이 있음."

#: eeschema/symbol_checker.cpp:271
#, c-format
msgid "Info: <b>Hidden power pin %s</b> %s at location <b>(%s, %s)</b>."
msgstr ""
"<b>숨은 전원 핀 %s</b> %s이(가) 위치 <b>(%s, %s)</b> 에서 발견되었습니다."

#: eeschema/symbol_checker.cpp:279
#, c-format
msgid ""
"Info: <b>Hidden power pin %s</b> %s at location <b>(%s, %s)</b> in unit %c."
msgstr ""
"<b>숨은 전원 핀 %s</b> %s이(가) 위치 <b>(%s, %s)</b> 에서 발견되었습니다 (유"
"닛 %c)."

#: eeschema/symbol_checker.cpp:290
msgid ""
"(Hidden power pins will drive their pin names on to any connected nets.)"
msgstr "(숨은 전원 핀은 연결된 모든 네트에 자신의 핀 이름을 표시합니다.)"

#: eeschema/symbol_checker.cpp:305
#, c-format
msgid "<b>Off grid pin %s</b> %s at location <b>(%s, %s)</b> of %s body style."
msgstr ""
"<b>오프 그리드 핀 %s</b> %s이(가) 위치 <b>(%s, %s)</b> 에서 %s 본체 유형이 있"
"음."

#: eeschema/symbol_checker.cpp:315
#, c-format
msgid ""
"<b>Off grid pin %s</b> %s at location <b>(%s, %s)</b> in unit %c of %s body "
"style."
msgstr ""
"<b>오프 그리드 핀 %s</b> %s이(가) 위치 <b>(%s, %s)</b> 에 %c 유닛의 %s 본체 "
"유형에 있음."

#: eeschema/symbol_checker.cpp:329
#, c-format
msgid "<b>Off grid pin %s</b> %s at location <b>(%s, %s)</b>."
msgstr ""
"<b>그리드에서 벗어난 핀 %s</b> %s이(가) 위치 <b>(%s, %s)</b> 에서 발견되었습"
"니다."

#: eeschema/symbol_checker.cpp:337
#, c-format
msgid "<b>Off grid pin %s</b> %s at location <b>(%s, %s)</b> in unit %c."
msgstr ""
"<b>그리드에서 벗어난 핀 %s</b> %s이(가) 위치 <b>(%s, %s)</b> 에서 발견되었습"
"니다 (유닛 %c)."

#: eeschema/symbol_checker.cpp:379
#, c-format
msgid "<b>Graphic circle has radius = 0</b> at location <b>(%s, %s)</b>."
msgstr "<b>(%s, %s)</b> 위치에서 <b>그래픽 원의 반경 = 0</b>입니다."

#: eeschema/symbol_checker.cpp:390
#, c-format
msgid "<b>Graphic rectangle has size 0</b> at location <b>(%s, %s)</b>."
msgstr "<b>(%s, %s)</b> 에서 <b>그래픽 직사각형의 크기는 0</b>입니다."

#: eeschema/symbol_chooser_frame.cpp:69
msgid "Symbol Chooser"
msgstr "심볼 선택기"

#: eeschema/symbol_diff_frame.cpp:62
msgid "KiCad Symbol Difference Viewer"
msgstr "KiCad 심볼 차이점 뷰어"

#: eeschema/symbol_diff_frame.cpp:103 eeschema/symbol_viewer_frame.cpp:170
msgid ""
"Filter on symbol name, keywords, description and pin count.\n"
"Search terms are separated by spaces.  All search terms must match.\n"
"A term which is a number will also match against the pin count."
msgstr ""
"심볼 이름, 키워드, 설명과 핀 개수로 필터링할 수 있습니다.\n"
"검색어는 공백으로 구분됩니다.  모든 검색어가 일치해야 합니다.\n"
"숫자 항목도 핀 개수와 일치해야 합니다."

#: eeschema/symbol_editor/lib_logger.cpp:64
msgid ""
"Not all symbol libraries could be loaded.  Use the Manage Symbol\n"
"Libraries dialog to adjust paths and add or remove libraries."
msgstr ""
"모든 심볼 라이브러리를 불러올 수 없었습니다.  심볼 라이브러리 관리를 이용하"
"여\n"
"경로를 조정하고 라이브러리를 추가하거나 삭제하세요."

#: eeschema/symbol_editor/menubar_symbol_editor.cpp:68
#: eeschema/symbol_editor/menubar_symbol_editor.cpp:77
msgid "Symbol..."
msgstr "심볼..."

#: eeschema/symbol_editor/menubar_symbol_editor.cpp:78
msgid "View as PNG..."
msgstr "PNG로 보기..."

#: eeschema/symbol_editor/menubar_symbol_editor.cpp:79
msgid "Symbol as SVG..."
msgstr "심볼을 SVG로 내보내기..."

#: eeschema/symbol_editor/menubar_symbol_editor.cpp:86
#: eeschema/symbol_editor/symbol_edit_frame.cpp:102
msgid "Library Editor"
msgstr "라이브러리 편집기"

#: eeschema/symbol_editor/symbol_edit_frame.cpp:116
msgid "KiCad Symbol Editor"
msgstr "KiCad 심볼 편집기"

#: eeschema/symbol_editor/symbol_edit_frame.cpp:143
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1070
#: eeschema/symbol_library.cpp:517 eeschema/symbol_tree_model_adapter.cpp:74
#: eeschema/symbol_viewer_frame.cpp:274
msgid "Loading Symbol Libraries"
msgstr "심볼 라이브러리를 불러오는 중"

#: eeschema/symbol_editor/symbol_edit_frame.cpp:248
msgid "Library changes are unsaved"
msgstr "라이브러리 변경점 저장되지 않음"

#: eeschema/symbol_editor/symbol_edit_frame.cpp:259
msgid "Symbol library loading was cancelled by user."
msgstr "사용자가 심볼 라이브러리 로드를 취소했습니다."

#: eeschema/symbol_editor/symbol_edit_frame.cpp:807
#, c-format
msgid ""
"Editing symbol %s from schematic.  Saving will update the schematic only."
msgstr "회로도에서 %s 심볼을 편집합니다.  저장하면 회로도만을 업데이트합니다."

#: eeschema/symbol_editor/symbol_edit_frame.cpp:816
msgid "Manage symbol libraries"
msgstr "심볼 라이브러리 관리"

#: eeschema/symbol_editor/symbol_edit_frame.cpp:827
msgid ""
"Symbols in legacy libraries are not editable.  Use Manage Symbol Libraries "
"to migrate to current format."
msgstr ""
"오래된 라이브러리의 심볼들은 편집할 수 없습니다.  심볼 라이브러리 관리를 통"
"해 현재 형식으로 옮기십시오."

#: eeschema/symbol_editor/symbol_edit_frame.cpp:848
#, c-format
msgid "Symbol %s is a derived symbol.  Symbol graphics will not be editable."
msgstr "실볼 %s는 파생된 기호입니다.  심볼 그래픽은 편집할 수 없습니다."

#: eeschema/symbol_editor/symbol_edit_frame.cpp:926
#: eeschema/symbol_editor/symbol_edit_frame.cpp:977
#: eeschema/tools/sch_editor_control.cpp:395
#, c-format
msgid "Library '%s' already exists."
msgstr "라이브러리 '%s'이(가) 이미 존재합니다."

#: eeschema/symbol_editor/symbol_edit_frame.cpp:934
#, c-format
msgid ""
"Could not create the library file '%s'.\n"
"Make sure you have write permissions and try again."
msgstr ""
"라이브러리 파일 '%s'을(를) 만들 수 없습니다.\n"
"쓰기 사용 권한이 있는지 확인하고 다시 시도하십시오."

#: eeschema/symbol_editor/symbol_edit_frame.cpp:945
#: eeschema/symbol_editor/symbol_edit_frame.cpp:983
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:248
msgid "Could not open the library file."
msgstr "라이브러리 파일을 열 수 없습니다."

#: eeschema/symbol_editor/symbol_edit_frame.cpp:1076
#, c-format
msgid "Loading library '%s'..."
msgstr "라이브러리 로딩 '%s'…"

#: eeschema/symbol_editor/symbol_edit_frame.cpp:1170
#, c-format
msgid "Failed to save backup to '%s'."
msgstr "'%s'에 백업을 저장하지 못했습니다."

#: eeschema/symbol_editor/symbol_edit_frame.cpp:1409
#, c-format
msgid ""
"The current configuration does not include the library '%s'.\n"
"Use Manage Symbol Libraries to edit the configuration."
msgstr ""
"현재 설정은 라이브러리 '%s'을(를) 포함시키지 않습니다.\n"
"심볼 라이브러리 관리를 통해 설정을 편집하세요."

#: eeschema/symbol_editor/symbol_edit_frame.cpp:1412
msgid "Library not found in symbol library table."
msgstr "심볼 라이브러리 테이블에서 라이브러리를 찾을 수 없습니다."

#: eeschema/symbol_editor/symbol_edit_frame.cpp:1420
#, c-format
msgid ""
"The library '%s' is not enabled in the current configuration.\n"
"Use Manage Symbol Libraries to edit the configuration."
msgstr ""
"현재 설정은 라이브러리 '%s'을(를) 사용할 수 없습니다.\n"
"심볼 라이브러리 관리를 통해 설정을 편집하세요."

#: eeschema/symbol_editor/symbol_edit_frame.cpp:1423
msgid "Symbol library not enabled."
msgstr "심볼 라이브러리가 활성화되지 않았습니다."

#: eeschema/symbol_editor/symbol_edit_frame.cpp:1739
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1791
msgid "Error saving global library table."
msgstr "전역 라이브러리 테이블 저장 오류."

#: eeschema/symbol_editor/symbol_edit_frame.cpp:1740
#: eeschema/symbol_editor/symbol_edit_frame.cpp:1792
msgid "Error saving project library table."
msgstr "프로젝트 라이브러리 테이블을 저장하는 동안 오류가 발생했습니다."

#: eeschema/symbol_editor/symbol_editor.cpp:65
msgid "[from schematic]"
msgstr "[회로도에서]"

#: eeschema/symbol_editor/symbol_editor.cpp:75
msgid "[Read Only Library]"
msgstr "[읽기 전용 라이브러리]"

#: eeschema/symbol_editor/symbol_editor.cpp:79
msgid "[no symbol loaded]"
msgstr "[불러온 심볼 없음]"

#: eeschema/symbol_editor/symbol_editor.cpp:111
#: eeschema/tools/symbol_editor_control.cpp:682
msgid "No schematic currently open."
msgstr "현재 열려있는 회로도가 없습니다."

#: eeschema/symbol_editor/symbol_editor.cpp:127
#: eeschema/symbol_editor/symbol_editor.cpp:521
#: eeschema/symbol_editor/symbol_editor.cpp:1216
#: eeschema/tools/symbol_editor_control.cpp:188
#: eeschema/tools/symbol_editor_control.cpp:268
#: eeschema/tools/symbol_editor_control.cpp:310
#, c-format
msgid "Symbol library '%s' is not writable."
msgstr "심볼 라이브러리 '%s'에 쓸 수 없습니다."

#: eeschema/symbol_editor/symbol_editor.cpp:129
#: eeschema/symbol_editor/symbol_editor.cpp:523
#: eeschema/symbol_editor/symbol_editor.cpp:1217
msgid "You must save to a different location."
msgstr "반드시 다른 위치에 저장하여야 합니다."

#: eeschema/symbol_editor/symbol_editor.cpp:186
#: eeschema/symbol_editor/symbol_editor.cpp:1022
msgid "The current symbol has been modified.  Save changes?"
msgstr "현재 심볼은 변경되었습니다.  변경점을 저장할까요?"

#: eeschema/symbol_editor/symbol_editor.cpp:373
#, c-format
msgid "Deriving from symbol '%s'."
msgstr "심볼 '%s'에서 파생됨."

#: eeschema/symbol_editor/symbol_editor.cpp:393
#: eeschema/symbol_editor/symbol_editor.cpp:698
#: eeschema/tools/symbol_editor_control.cpp:375
#, c-format
msgid "Symbol '%s' already exists in library '%s'."
msgstr "심볼 '%s'은(는) 이미 라이브러리 '%s'에 존재합니다."

#: eeschema/symbol_editor/symbol_editor.cpp:399
#: eeschema/symbol_editor/symbol_editor.cpp:703
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:132
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:199
#: eeschema/tools/symbol_editor_control.cpp:380
#: kicad/tools/kicad_manager_control.cpp:329
#: pcbnew/dialogs/dialog_export_idf.cpp:175
#: pcbnew/dialogs/dialog_gencad_export_options.cpp:122
#: pcbnew/footprint_libraries_utils.cpp:376
#: pcbnew/footprint_libraries_utils.cpp:1118
#: pcbnew/footprint_libraries_utils.cpp:1258
#: pcbnew/tools/footprint_editor_control.cpp:452
msgid "Overwrite"
msgstr "덮어쓰기"

#: eeschema/symbol_editor/symbol_editor.cpp:568
msgid "Save Symbol As"
msgstr "다른 이름으로 심볼 저장"

#: eeschema/symbol_editor/symbol_editor.cpp:607
#: pcbnew/footprint_libraries_utils.cpp:1003
msgid "Save in library:"
msgstr "라이브러리에 저장:"

#: eeschema/symbol_editor/symbol_editor.cpp:686
#: pcbnew/footprint_libraries_utils.cpp:1086
msgid "A library must be specified."
msgstr "라이브러리를 지정해야 합니다."

#: eeschema/symbol_editor/symbol_editor.cpp:713
msgid ""
"Derived symbols must be saved in the same library as their parent symbol."
msgstr "파생 심볼은 상위 심볼과 같은 라이브러리에 저장되어야 합니다."

#: eeschema/symbol_editor/symbol_editor.cpp:762
#, c-format
msgid "Symbol name '%s' already in use."
msgstr "심볼 이름 '%s'이(가) 이미 사용 중입니다."

#: eeschema/symbol_editor/symbol_editor.cpp:800
#, c-format
msgid ""
"The symbol '%s' has been modified.\n"
"Do you want to remove it from the library?"
msgstr ""
"심볼 '%s'은(는) 변경되었습니다.\n"
"라이브러리에서 해당 심볼을 삭제할까요?"

#: eeschema/symbol_editor/symbol_editor.cpp:812
#, c-format
msgid ""
"The symbol %s is used to derive other symbols.\n"
"Deleting this symbol will delete all of the symbols derived from it.\n"
"\n"
"Do you wish to delete this symbol and all of its derivatives?"
msgstr ""
"심볼 %s은(는) 다른 심볼을 파생하는 데에 사용되었습니다.\n"
"이 심볼을 삭제하면 모든 파생 심볼도 함께 지워집니다.\n"
"\n"
"이 심볼과 모든 파생 심볼을 삭제할까요?"

#: eeschema/symbol_editor/symbol_editor.cpp:817
#: eeschema/tools/ee_actions.cpp:207
msgid "Delete Symbol"
msgstr "심볼 삭제"

#: eeschema/symbol_editor/symbol_editor.cpp:818
msgid "Keep Symbol"
msgstr "심볼 유지"

#: eeschema/symbol_editor/symbol_editor.cpp:958 pcbnew/files.cpp:326
#: pcbnew/footprint_libraries_utils.cpp:1172
#, c-format
msgid "Revert '%s' to last version saved?"
msgstr "마지막으로 저장된 버전으로 '%s'을(를) 되돌리시겠습니까?"

#: eeschema/symbol_editor/symbol_editor.cpp:1036
#, c-format
msgid "Symbol %s not found in library '%s'."
msgstr "심볼 %s이(가) 라이브러리 '%s'에서 찾을 수 없습니다."

#: eeschema/symbol_editor/symbol_editor.cpp:1065
msgid "No library specified."
msgstr "지정된 라이브러리가 없습니다."

#: eeschema/symbol_editor/symbol_editor.cpp:1084
#, c-format
msgid "Save Library '%s' As..."
msgstr "'%s' 라이브러리를 다른 이름으로 저장..."

#: eeschema/symbol_editor/symbol_editor.cpp:1124
#, c-format
msgid "Failed to save changes to symbol library file '%s'."
msgstr "심볼 라이브러리 파일 '%s'에 대한 변경 사항을 저장하지 못했습니다."

#: eeschema/symbol_editor/symbol_editor.cpp:1126
msgid "Error Saving Library"
msgstr "라이브러리 파일 저장 중 오류가 발생하였습니다"

#: eeschema/symbol_editor/symbol_editor.cpp:1172
#, c-format
msgid "Symbol library file '%s' saved."
msgstr "심볼 라이브러리 파일 '%s'이(가) 저장되었습니다."

#: eeschema/symbol_editor/symbol_editor.cpp:1271
msgid "Undefined!"
msgstr "정의 않됨!"

#: eeschema/symbol_editor/symbol_editor.cpp:1272
#: eeschema/symbol_viewer_frame.cpp:459 pcbnew/board_item.cpp:329
msgid "Parent"
msgstr "상위"

#: eeschema/symbol_editor/symbol_editor.cpp:1287
msgid "Body"
msgstr "보디"

#: eeschema/symbol_editor/symbol_editor.cpp:1290
msgid "Power Symbol"
msgstr "전원 심볼"

#: eeschema/symbol_editor/symbol_editor.cpp:1297
msgid "Datasheet"
msgstr "데이터 시트"

#: eeschema/symbol_editor/symbol_editor_import_export.cpp:81
msgid "Import Symbol"
msgstr "심볼 가져오기"

#: eeschema/symbol_editor/symbol_editor_import_export.cpp:96
#: pcbnew/load_select_footprint.cpp:345
#, c-format
msgid "Unable to find a reader for '%s'."
msgstr "'%s'의 리더를 찾을 수 없음."

#: eeschema/symbol_editor/symbol_editor_import_export.cpp:110
#, c-format
msgid "Cannot import symbol library '%s'."
msgstr "심볼 라이브러리 '%s'을(를) 가져올 수 없습니다."

#: eeschema/symbol_editor/symbol_editor_import_export.cpp:117
#, c-format
msgid "Symbol library file '%s' is empty."
msgstr "심볼 라이브러리 파일 '%s'이(가) 비어 있습니다."

#: eeschema/symbol_editor/symbol_editor_import_export.cpp:129
#: eeschema/symbol_editor/symbol_editor_import_export.cpp:194
#, c-format
msgid "Symbol %s already exists in library '%s'."
msgstr "심볼 %s은(는) 이미 라이브러리 '%s'에 존재합니다."

#: eeschema/symbol_editor/symbol_editor_import_export.cpp:161
msgid "Export Symbol"
msgstr "심볼 내보내기"

#: eeschema/symbol_editor/symbol_editor_import_export.cpp:186
#, c-format
msgid "Error occurred attempting to load symbol library file '%s'."
msgstr "심볼 라이브러리 파일 '%s'을(를) 불러오는 중에 오류가 발생했습니다."

#: eeschema/symbol_editor/symbol_editor_import_export.cpp:209
#, c-format
msgid "Insufficient permissions to save library '%s'."
msgstr "라이브러리 '%s'을(를) 저장할 수 있는 권한이 없습니다."

#: eeschema/symbol_editor/symbol_editor_import_export.cpp:229
#, c-format
msgid "Error creating symbol library '%s'."
msgstr "심볼 라이브러리 '%s'을(를) 만드는 동안 오류가 발생했습니다."

#: eeschema/symbol_editor/symbol_editor_import_export.cpp:236
#, c-format
msgid "Symbol %s saved to library '%s'."
msgstr "심볼 %s이(가) 라이브러리 '%s'에 저장되었습니다."

#: eeschema/symbol_lib_table.cpp:278
#, c-format
msgid ""
"Duplicate library nickname '%s' found in symbol library table file line %d"
msgstr ""
"중복 라이브러리 별명 '%s'이(가) 풋프린트 라이브러리 테이블 파일의 행 %d에 있"
"습니다"

#: eeschema/symbol_library.cpp:598 eeschema/symbol_tree_model_adapter.cpp:216
#, c-format
msgid "Error loading symbol library '%s'."
msgstr "심볼 라이브러리 '%s'을(를) 불러오는 중에 오류가 발생했습니다."

#: eeschema/symbol_library_manager.cpp:84
#: eeschema/symbol_tree_model_adapter.cpp:109
#: eeschema/symbol_viewer_frame.cpp:306
msgid "Errors loading symbols:"
msgstr "심볼 불러오는 중 오류 발생:"

#: eeschema/symbol_library_manager.cpp:162
#, c-format
msgid "Library '%s' not found in the Symbol Library Table."
msgstr "라이브러리 '%s'이(가) 심볼 라이브러리 테이블에서 찾을 수 없습니다."

#: eeschema/symbol_library_manager.cpp:414
msgid "Symbol not found."
msgstr "심볼을 찾을 수 없습니다."

#: eeschema/symbol_library_manager.cpp:622
#, c-format
msgid "Cannot load symbol '%s' from library '%s'."
msgstr "심볼 '%s'을(를) 라이브러리 '%s'에서 불러올 수 없습니다."

#: eeschema/symbol_library_manager.cpp:781
#, c-format
msgid "Cannot enumerate library '%s'."
msgstr "라이브러리 '%s'을(를) 열거할 수 없습니다."

#: eeschema/symbol_library_manager.cpp:843
#: eeschema/symbol_library_manager.cpp:848
#, c-format
msgid "Error updating library buffer: %s"
msgstr "라이브러리 버퍼 업데이트 오류 발생: %s"

#: eeschema/symbol_library_manager.cpp:853
msgid "Error updating library buffer."
msgstr "라이브러리 버퍼 업데이트 중 오류 발생."

#: eeschema/symbol_library_manager.cpp:993
#: eeschema/tools/sch_editor_control.cpp:442
#, c-format
msgid "Error saving symbol %s to library '%s'."
msgstr "심볼 %s을(를) 라이브러리 '%s'에 저장하는 동안 오류가 발생했습니다."

#: eeschema/symbol_tree_synchronizing_adapter.cpp:273
msgid "(failed to load)"
msgstr "(불러오기 실패하였습니다)"

#: eeschema/symbol_viewer_frame.cpp:110
msgid "KiCad Symbol Library Browser"
msgstr "KiCad 심볼 라이브러리 탐색"

#: eeschema/symbol_viewer_frame.cpp:1102 pcbnew/footprint_viewer_frame.cpp:1016
#: pcbnew/footprint_viewer_frame.cpp:1021
msgid "[no library selected]"
msgstr "[선택된 라이브러리 없음]"

#: eeschema/toolbars_symbol_viewer.cpp:51
msgid "Display previous symbol"
msgstr "이전 심볼 표시"

#: eeschema/toolbars_symbol_viewer.cpp:55
msgid "Display next symbol"
msgstr "다음 심볼 표시"

#: eeschema/toolbars_symbol_viewer.cpp:108
msgid "Symbol Viewer"
msgstr "심볼 뷰어"

#: eeschema/tools/assign_footprints.cpp:212
msgid "Load Symbol Footprint Link File"
msgstr "심볼 풋프린트 링크 파일 불러오기"

#: eeschema/tools/assign_footprints.cpp:223
msgid "Keep existing footprint field visibility"
msgstr "이미 존재하는 풋프린트 필드 가시성 유지"

#: eeschema/tools/assign_footprints.cpp:224
msgid "Show all footprint fields"
msgstr "모든 풋프린트 필드 표시"

#: eeschema/tools/assign_footprints.cpp:225
msgid "Hide all footprint fields"
msgstr "모든 풋프린트 필드 숨기기"

#: eeschema/tools/assign_footprints.cpp:227
msgid "Select the footprint field visibility setting."
msgstr "풋프린트 필드 가시성 설정을 선택하세요."

#: eeschema/tools/assign_footprints.cpp:228
msgid "Change Visibility"
msgstr "가시성 변경"

#: eeschema/tools/assign_footprints.cpp:238
#, c-format
msgid "Failed to open symbol-footprint link file '%s'."
msgstr "심볼-풋프린트 연결 파일 '%s'을(를) 열지 못했습니다."

#: eeschema/tools/backannotate.cpp:76
msgid "Select at least one property to back annotate."
msgstr "주석을 달기 위해 최소한 한 개의 속성을 선택하세요."

#: eeschema/tools/backannotate.cpp:100
msgid ""
"Cannot fetch PCB netlist because Schematic Editor is opened in stand-alone "
"mode.\n"
"You must launch the KiCad project manager and create a project."
msgstr ""
"회로도 편집기가 독립 실행형 모드로 열렸기 때문에 PCB 네트리스트를 가져올 수 "
"없습니다.\n"
"KiCad 프로젝트 관리자를 실행하고 프로젝트를 생성해야 합니다."

#: eeschema/tools/backannotate.cpp:168
#, c-format
msgid "Footprint '%s' has no assigned symbol."
msgstr "풋프린트 '%s' 에는 할당된 심볼이 없습니다."

#: eeschema/tools/backannotate.cpp:245
#, c-format
msgid "Footprints '%s' and '%s' linked to same symbol."
msgstr "풋프린트 '%s'와 '%s'이(가) 같은 심볼에 링크되어 있습니다."

#: eeschema/tools/backannotate.cpp:311
#, c-format
msgid "Cannot find symbol for footprint '%s'."
msgstr "풋프린트 '%s'에 대한 심볼을 찾을 수 없습니다."

#: eeschema/tools/backannotate.cpp:340
#, c-format
msgid ""
"Footprint '%s' is not present on PCB. Corresponding symbols in schematic "
"must be manually deleted (if desired)."
msgstr ""
"풋프린트 '%s'이(가) PCB에 존재하지 않습니다. 회로도의 대응하는 심볼은 수동으"
"로 삭제되어야 합니다 (필요할 경우)."

#: eeschema/tools/backannotate.cpp:353
msgid "Re-linking footprints requires a fully annotated schematic."
msgstr "풋프린트의 재연결은 완전히 주석 처리된 회로도가 필요합니다."

#: eeschema/tools/backannotate.cpp:356
msgid "Footprint re-linking cancelled by user."
msgstr "풋프린트의 재 연결이 사용자에 의해 취소되었습니다."

#: eeschema/tools/backannotate.cpp:381
msgid "true"
msgstr "참"

#: eeschema/tools/backannotate.cpp:381
msgid "false"
msgstr "거짓"

#: eeschema/tools/backannotate.cpp:387
#, c-format
msgid "Change '%s' reference designator to '%s'."
msgstr "'%s' 참조 지정자를 '%s'(으)로 변경합니다."

#: eeschema/tools/backannotate.cpp:403
#, c-format
msgid "Change %s footprint assignment from '%s' to '%s'."
msgstr "%s 풋프린트 할당을 '%s'에서 '%s'(으)로 변경합니다."

#: eeschema/tools/backannotate.cpp:420
#, c-format
msgid "Change %s value from '%s' to '%s'."
msgstr "%s 값을 '%s'에서 '%s'(으)로 변경합니다."

#: eeschema/tools/backannotate.cpp:437
#, c-format
msgid "Change %s 'Do not populate' from '%s' to '%s'."
msgstr "'%s'의 '채우지 않음'을 '%s'에서 '%s'로 변경."

#: eeschema/tools/backannotate.cpp:452
#, c-format
msgid "Change %s 'Exclude from bill of materials' from '%s' to '%s'."
msgstr "%s 'BOM에서 제외'를 '%s'에서 '%s'로 변경."

#: eeschema/tools/backannotate.cpp:475
#, c-format
msgid "Cannot find %s pin '%s'."
msgstr "%s 핀 '%s'을(를) 찾을 수 없습니다."

#: eeschema/tools/backannotate.cpp:518
#, c-format
msgid "Change field '%s' value to '%s'."
msgstr "필드 '%s' 값을 '%s'로 변경함."

#: eeschema/tools/backannotate.cpp:534
#, c-format
msgid "Add field '%s' with value '%s'."
msgstr "'%s' 필드를 '%s' 값으로 추가합니다."

#: eeschema/tools/backannotate.cpp:563
#, c-format
msgid "Delete field '%s.'"
msgstr "'%s.' 필드 삭제"

#: eeschema/tools/backannotate.cpp:703
#, c-format
msgid "Change %s pin %s net label from '%s' to '%s'."
msgstr "%s 핀 %s 네트 라벨을 '%s'에서 '%s'(으)로 변경합니다."

#: eeschema/tools/backannotate.cpp:725
#, c-format
msgid "Net %s cannot be changed to %s because it is driven by a power pin."
msgstr ""
"네트 %s은(는) 전원 핀에 의해 구동되고 있기 때문에, %s(으)로 교체될 수 없습니"
"다."

#: eeschema/tools/backannotate.cpp:734
#, c-format
msgid "Add label '%s' to %s pin %s net."
msgstr "'%s' 라벨을 %s 핀 %s 네트에 추가합니다."

#: eeschema/tools/ee_actions.cpp:47
msgid "Perform electrical rules check"
msgstr "전기 규칙 검사 수행"

#: eeschema/tools/ee_actions.cpp:53
msgid "Symbol Checker"
msgstr "심볼 검사기"

#: eeschema/tools/ee_actions.cpp:54
msgid "Show the symbol checker window"
msgstr "심볼 검사기 창 표시"

#: eeschema/tools/ee_actions.cpp:61
msgid "Show differences between schematic symbol and its library equivalent"
msgstr "회로도 심볼과 해당 라이브러리 간의 차이점 표시"

#: eeschema/tools/ee_actions.cpp:68
msgid "Show simulation window for running SPICE or IBIS simulations."
msgstr "SPICE 또는 IBIS 시뮬레이션을 실행하기 위한 시뮬레이션 창을 표시합니다."

#: eeschema/tools/ee_actions.cpp:77
msgid "Opens the datasheet in a browser"
msgstr "브라우저에서 데이터시트를 엽니다"

#: eeschema/tools/ee_actions.cpp:86 pcbnew/tools/pcb_actions.cpp:1987
msgid "Create Corner"
msgstr "코너 만들기"

#: eeschema/tools/ee_actions.cpp:87 pcbnew/tools/pcb_actions.cpp:1988
msgid "Create a corner"
msgstr "코너 만들기"

#: eeschema/tools/ee_actions.cpp:93 eeschema/tools/ee_point_editor.cpp:1517
#: pcbnew/tools/pcb_actions.cpp:1994
msgid "Remove Corner"
msgstr "코너 제거"

#: eeschema/tools/ee_actions.cpp:94 pcbnew/tools/pcb_actions.cpp:1995
msgid "Remove corner"
msgstr "코너 제거"

#: eeschema/tools/ee_actions.cpp:110
msgid "Select Node"
msgstr "노드 선택"

#: eeschema/tools/ee_actions.cpp:111
msgid "Select a connection item under the cursor"
msgstr "커서 아래의 연결 항목 선택"

#: eeschema/tools/ee_actions.cpp:118
msgid "Select Connection"
msgstr "연결 선택"

#: eeschema/tools/ee_actions.cpp:119
msgid "Select a complete connection"
msgstr "전체 연결 선택"

#: eeschema/tools/ee_actions.cpp:158
msgid "Save Library As..."
msgstr "다른 이름으로 라이브러리 저장..."

#: eeschema/tools/ee_actions.cpp:159
msgid "Save the current library to a new file."
msgstr "현재 라이브러리를 새 파일에 저장합니다."

#: eeschema/tools/ee_actions.cpp:165
msgid "New Symbol..."
msgstr "새 심볼..."

#: eeschema/tools/ee_actions.cpp:166
msgid "Create a new symbol"
msgstr "새 심볼 생성"

#: eeschema/tools/ee_actions.cpp:172
msgid "Derive from Existing Symbol"
msgstr "기존 심볼에서 파생"

#: eeschema/tools/ee_actions.cpp:173
msgid "Create a new symbol, derived from an existing symbol"
msgstr "기존 심볼에서 파생된 새 심볼 만들기"

#: eeschema/tools/ee_actions.cpp:179
msgid "Edit Symbol"
msgstr "심볼 편집"

#: eeschema/tools/ee_actions.cpp:180
msgid "Show selected symbol on editor canvas"
msgstr "편집기 캔버스에 선택한 심볼 표시"

#: eeschema/tools/ee_actions.cpp:186
msgid "Duplicate Symbol"
msgstr "중복 심볼"

#: eeschema/tools/ee_actions.cpp:187
msgid "Make a copy of the selected symbol"
msgstr "선택한 심볼의 복사본 만들기"

#: eeschema/tools/ee_actions.cpp:193
msgid "Rename Symbol..."
msgstr "심볼 이름 변경..."

#: eeschema/tools/ee_actions.cpp:194
msgid "Rename the selected symbol"
msgstr "선택한 심볼 이름 변경"

#: eeschema/tools/ee_actions.cpp:200
msgid "Save Copy As..."
msgstr "복사본 다른 이름으로 저장..."

#: eeschema/tools/ee_actions.cpp:201
msgid "Save a copy of the current symbol to a different library."
msgstr "현재 심볼의 복사본을 다른 라이브러리에 저장합니다."

#: eeschema/tools/ee_actions.cpp:208
msgid "Remove the selected symbol from its library"
msgstr "라이브러리에서 선택한 심볼 제거"

#: eeschema/tools/ee_actions.cpp:226
msgid "Paste Symbol"
msgstr "붙여넣기 심볼"

#: eeschema/tools/ee_actions.cpp:232
msgid "Import Symbol..."
msgstr "심볼 가져오기..."

#: eeschema/tools/ee_actions.cpp:233
msgid "Import a symbol to the current library"
msgstr "현재 라이브러리로 심볼 가져오기"

#: eeschema/tools/ee_actions.cpp:239
msgid "Export..."
msgstr "내보내기..."

#: eeschema/tools/ee_actions.cpp:240
msgid "Export a symbol to a new library file"
msgstr "새 라이브러리 파일로 심볼 내보내기"

#: eeschema/tools/ee_actions.cpp:246
msgid "Update Symbol Fields..."
msgstr "심볼 필드 업데이트..."

#: eeschema/tools/ee_actions.cpp:247
msgid "Update symbol to match changes made in parent symbol"
msgstr "부모 심볼의 변경 사항과 일치하도록 심볼 업데이트"

#: eeschema/tools/ee_actions.cpp:253
msgid "Set Unit Display Name..."
msgstr "단위 표시 이름 설정..."

#: eeschema/tools/ee_actions.cpp:254
msgid "Set the display name for a unit"
msgstr "장치의 표시 이름 설정"

#: eeschema/tools/ee_actions.cpp:259 eeschema/tools/ee_actions.cpp:260
msgid "Add Symbol to Schematic"
msgstr "회로도에 심볼 추가"

#: eeschema/tools/ee_actions.cpp:266
msgid "Show Pin Electrical Types"
msgstr "핀의 전기 유형을 표시"

#: eeschema/tools/ee_actions.cpp:267
msgid "Annotate pins with their electrical types"
msgstr "전기 유형으로 핀에 주석 달기"

#: eeschema/tools/ee_actions.cpp:273
msgid "Show Pin Numbers"
msgstr "핀 번호 표시"

#: eeschema/tools/ee_actions.cpp:274
msgid "Annotate pins with their numbers"
msgstr "핀에 번호로 주석 달기"

#: eeschema/tools/ee_actions.cpp:280
msgid "Show Symbol Tree"
msgstr "심볼 트리 표시"

#: eeschema/tools/ee_actions.cpp:286
msgid "Hide Symbol Tree"
msgstr "심볼 트리 숨기기"

#: eeschema/tools/ee_actions.cpp:292
msgid "Export View as PNG..."
msgstr "보기를 PNG로 내보내기..."

#: eeschema/tools/ee_actions.cpp:293
msgid "Create PNG file from the current view"
msgstr "현재 보기에서 PNG 파일 만들기"

#: eeschema/tools/ee_actions.cpp:299
msgid "Export Symbol as SVG..."
msgstr "심볼을 SVG로 내보내기..."

#: eeschema/tools/ee_actions.cpp:300
msgid "Create SVG file from the current symbol"
msgstr "현재 심볼에서 SVG 파일 생성"

#: eeschema/tools/ee_actions.cpp:306
msgid "Synchronized Pins Mode"
msgstr "핀 편집 동기화 모드"

#: eeschema/tools/ee_actions.cpp:307
msgid ""
"Synchronized Pins Mode\n"
"When enabled propagates all changes (except pin numbers) to other units.\n"
"Enabled by default for multiunit parts with interchangeable units."
msgstr ""
"핀 편집 동기화 모드\n"
"기능이 활성화된 경우 모든 변경 내용 (핀 번호 제외) 을 다른 유닛에 전달합니"
"다.\n"
"교체 가능한 유닛을 포함한 다중 유닛 부품에 대해서는 초기에 활성화됩니다."

#: eeschema/tools/ee_actions.cpp:320
#: eeschema/tools/symbol_editor_drawing_tools.cpp:288
msgid "Add Pin"
msgstr "핀 추가"

#: eeschema/tools/ee_actions.cpp:321
msgid "Add a pin"
msgstr "핀 추가"

#: eeschema/tools/ee_actions.cpp:329 eeschema/tools/ee_actions.cpp:512
#: eeschema/tools/sch_drawing_tools.cpp:1520
#: eeschema/tools/symbol_editor_drawing_tools.cpp:294
#: pagelayout_editor/tools/pl_actions.cpp:63 pcbnew/tools/pcb_actions.cpp:174
msgid "Add Text"
msgstr "텍스트 추가"

#: eeschema/tools/ee_actions.cpp:330 pagelayout_editor/tools/pl_actions.cpp:64
#: pcbnew/tools/pcb_actions.cpp:175
msgid "Add a text item"
msgstr "텍스트 항목 추가"

#: eeschema/tools/ee_actions.cpp:338 eeschema/tools/ee_actions.cpp:520
#: eeschema/tools/sch_drawing_tools.cpp:1846
#: eeschema/tools/symbol_editor_drawing_tools.cpp:474
#: pcbnew/tools/pcb_actions.cpp:182
msgid "Add Text Box"
msgstr "텍스트 상자 추가"

#: eeschema/tools/ee_actions.cpp:339
msgid "Add a text box item"
msgstr "텍스트 상자 항목 추가"

#: eeschema/tools/ee_actions.cpp:346 eeschema/tools/ee_actions.cpp:1303
msgid "Add Lines"
msgstr "선 추가"

#: eeschema/tools/ee_actions.cpp:347
msgid "Add connected graphic lines"
msgstr "연결된 그래픽 라인 추가"

#: eeschema/tools/ee_actions.cpp:355 pcbnew/tools/zone_create_helper.cpp:251
msgid "Add Polygon"
msgstr "다각형 추가"

#: eeschema/tools/ee_actions.cpp:356
msgid "Draw polygons"
msgstr "다각형 그리기"

#: eeschema/tools/ee_actions.cpp:364
msgid "Move Symbol Anchor"
msgstr "심볼 앵커 이동"

#: eeschema/tools/ee_actions.cpp:365
msgid "Specify a new location for the symbol anchor"
msgstr "심볼 앵커의 새 위치 지정"

#: eeschema/tools/ee_actions.cpp:374
msgid "Push Pin Length"
msgstr "푸시 핀 길이"

#: eeschema/tools/ee_actions.cpp:375
msgid "Copy pin length to other pins in symbol"
msgstr "핀 길이를 심볼의 다른 핀에 복사"

#: eeschema/tools/ee_actions.cpp:381
msgid "Push Pin Name Size"
msgstr "푸시 핀 이름 크기"

#: eeschema/tools/ee_actions.cpp:382
msgid "Copy pin name size to other pins in symbol"
msgstr "핀 이름 크기를 심볼의 다른 핀에 복사"

#: eeschema/tools/ee_actions.cpp:388
msgid "Push Pin Number Size"
msgstr "푸시 핀의 번호 크기"

#: eeschema/tools/ee_actions.cpp:389
msgid "Copy pin number size to other pins in symbol"
msgstr "핀 이름 크기를 심볼의 다른 핀에 복사"

#: eeschema/tools/ee_actions.cpp:400 eeschema/tools/sch_drawing_tools.cpp:401
msgid "Add Symbol"
msgstr "심볼 추가"

#: eeschema/tools/ee_actions.cpp:401
msgid "Add symbols"
msgstr "심볼 추가"

#: eeschema/tools/ee_actions.cpp:411
msgid "Add Power"
msgstr "전원 추가"

#: eeschema/tools/ee_actions.cpp:412
msgid "Add power symbols"
msgstr "전원 심볼 추가"

#: eeschema/tools/ee_actions.cpp:422 eeschema/tools/sch_drawing_tools.cpp:950
msgid "Add No Connect Flag"
msgstr "연결 없음 플래그 추가"

#: eeschema/tools/ee_actions.cpp:423
msgid "Draw no-connection flags"
msgstr "연결 없음 플래그 그리기"

#: eeschema/tools/ee_actions.cpp:433 eeschema/tools/sch_drawing_tools.cpp:957
msgid "Add Junction"
msgstr "접합 추가"

#: eeschema/tools/ee_actions.cpp:434
msgid "Draw junctions"
msgstr "교차점 그리기"

#: eeschema/tools/ee_actions.cpp:444 eeschema/tools/sch_drawing_tools.cpp:963
msgid "Add Wire to Bus Entry"
msgstr "버스 항목에 와이어 추가"

#: eeschema/tools/ee_actions.cpp:445
msgid "Add a wire entry to a bus"
msgstr "버스에 와이어 항목 추가"

#: eeschema/tools/ee_actions.cpp:455 eeschema/tools/sch_drawing_tools.cpp:1530
#: eeschema/tools/sch_drawing_tools.cpp:1535
#: eeschema/tools/sch_drawing_tools.cpp:1540
msgid "Add Label"
msgstr "라벨 추가"

#: eeschema/tools/ee_actions.cpp:456
msgid "Draw net labels"
msgstr "네트 라벨 그리기"

#: eeschema/tools/ee_actions.cpp:463
msgid "Add Net Class Directive"
msgstr "네트 클래스 지시문 추가"

#: eeschema/tools/ee_actions.cpp:464
msgid "Add net class directive labels"
msgstr "네트 클래스 지시문 레이블 추가"

#: eeschema/tools/ee_actions.cpp:473 eeschema/tools/sch_drawing_tools.cpp:1525
msgid "Add Hierarchical Label"
msgstr "계층 라벨 추가"

#: eeschema/tools/ee_actions.cpp:474
msgid "Add hierarchical labels"
msgstr "계층 라벨 추가"

#: eeschema/tools/ee_actions.cpp:483
msgid "Add Sheet"
msgstr "시트 추가"

#: eeschema/tools/ee_actions.cpp:484
msgid "Draw hierarchical sheets"
msgstr "계층 시트 그리기"

#: eeschema/tools/ee_actions.cpp:492
msgid "Import Sheet Pin"
msgstr "시트 핀 가져오기"

#: eeschema/tools/ee_actions.cpp:493
msgid "Import hierarchical sheet pins"
msgstr "계층 시트 핀 가져오기"

#: eeschema/tools/ee_actions.cpp:502
msgid "Add Global Label"
msgstr "전역 라벨 추가"

#: eeschema/tools/ee_actions.cpp:503
msgid "Add global labels"
msgstr "전역 라벨 추가"

#: eeschema/tools/ee_actions.cpp:513
msgid "Draw text items"
msgstr "텍스트 항목 그리기"

#: eeschema/tools/ee_actions.cpp:521
msgid "Draw text box items"
msgstr "텍스트 상자 항목 그리기"

#: eeschema/tools/ee_actions.cpp:529 pagelayout_editor/tools/pl_actions.cpp:54
msgid "Add Rectangle"
msgstr "직사각형 추가"

#: eeschema/tools/ee_actions.cpp:530
msgid "Draw rectangles"
msgstr "사각형 그리기"

#: eeschema/tools/ee_actions.cpp:538
msgid "Add Circle"
msgstr "원 추가"

#: eeschema/tools/ee_actions.cpp:539
msgid "Draw circles"
msgstr "원 그리기"

#: eeschema/tools/ee_actions.cpp:547
msgid "Add Arc"
msgstr "호 추가"

#: eeschema/tools/ee_actions.cpp:548
msgid "Draw arcs"
msgstr "원호 그리기"

#: eeschema/tools/ee_actions.cpp:556 eeschema/tools/sch_drawing_tools.cpp:705
msgid "Add Image"
msgstr "이미지 추가"

#: eeschema/tools/ee_actions.cpp:557
msgid "Add bitmap images"
msgstr "비트맵 이미지 추가"

#: eeschema/tools/ee_actions.cpp:574
msgid "Repeat Last Item"
msgstr "마지막 개체를 반복하기"

#: eeschema/tools/ee_actions.cpp:575
msgid "Duplicates the last drawn item"
msgstr "마지막으로 그린 항목 복제"

#: eeschema/tools/ee_actions.cpp:580 pcbnew/tools/pcb_actions.cpp:528
msgid "Rotate Clockwise"
msgstr "시계 방향 회전"

#: eeschema/tools/ee_actions.cpp:581 pcbnew/tools/pcb_actions.cpp:529
msgid "Rotates selected item(s) clockwise"
msgstr "선택 항목 시계 방향 회전"

#: eeschema/tools/ee_actions.cpp:589 pcbnew/tools/pcb_actions.cpp:539
msgid "Rotate Counterclockwise"
msgstr "반시계 방향 회전"

#: eeschema/tools/ee_actions.cpp:590
msgid "Rotates selected item(s) counter-clockwise"
msgstr "선택 항목 반시계 방향 회전"

#: eeschema/tools/ee_actions.cpp:598 pcbnew/tools/pcb_actions.cpp:564
msgid "Mirror Vertically"
msgstr "수직 방향 반전"

#: eeschema/tools/ee_actions.cpp:599
msgid "Flips selected item(s) from top to bottom"
msgstr "선택 항목 상하 반전"

#: eeschema/tools/ee_actions.cpp:607 pcbnew/tools/pcb_actions.cpp:557
msgid "Mirror Horizontally"
msgstr "수평 방향 반전"

#: eeschema/tools/ee_actions.cpp:608
msgid "Flips selected item(s) from left to right"
msgstr "선택 항목 좌우 반전"

#: eeschema/tools/ee_actions.cpp:615 pcbnew/tools/edit_tool_move_fct.cpp:146
#: pcbnew/tools/pcb_actions.cpp:572
msgid "Swap"
msgstr "스왑"

#: eeschema/tools/ee_actions.cpp:616 pcbnew/tools/pcb_actions.cpp:573
msgid "Swaps selected items' positions"
msgstr "선택한 항목의 위치를 바꿈"

#: eeschema/tools/ee_actions.cpp:624 pcbnew/tools/pcb_actions.cpp:668
msgid "Properties..."
msgstr "속성..."

#: eeschema/tools/ee_actions.cpp:625 pcbnew/tools/pcb_actions.cpp:669
msgid "Displays item properties dialog"
msgstr "개체 속성 대화창 표시"

#: eeschema/tools/ee_actions.cpp:633
msgid "Edit Reference Designator..."
msgstr "참조 지정자 편집..."

#: eeschema/tools/ee_actions.cpp:634
msgid "Displays reference designator dialog"
msgstr "참조 지정자 대화 상자 표시"

#: eeschema/tools/ee_actions.cpp:642
msgid "Edit Value..."
msgstr "값 편집..."

#: eeschema/tools/ee_actions.cpp:643
msgid "Displays value field dialog"
msgstr "값 필드 대화창 표시"

#: eeschema/tools/ee_actions.cpp:651
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:236
msgid "Edit Footprint..."
msgstr "풋프린트 편집..."

#: eeschema/tools/ee_actions.cpp:652
msgid "Displays footprint field dialog"
msgstr "풋프린트 필드 대화 표시"

#: eeschema/tools/ee_actions.cpp:660 eeschema/tools/sch_edit_tool.cpp:1644
msgid "Autoplace Fields"
msgstr "필드 자동 배치"

#: eeschema/tools/ee_actions.cpp:661
msgid "Runs the automatic placement algorithm on the symbol or sheet's fields"
msgstr "심볼 또는 시트의 필드에 대해 자동 배치 알고리즘을 실행"

#: eeschema/tools/ee_actions.cpp:667
msgid "Change Symbols..."
msgstr "심볼 변경..."

#: eeschema/tools/ee_actions.cpp:668
msgid "Assign different symbols from the library"
msgstr "라이브러리로부터 다른 심볼을 할당"

#: eeschema/tools/ee_actions.cpp:674
msgid "Update Symbols from Library..."
msgstr "라이브러리에서 심볼 업데이트..."

#: eeschema/tools/ee_actions.cpp:675
msgid "Update symbols to include any changes from the library"
msgstr "라이브러리의 변경점을 포함시키기 위해 심볼 업데이트"

#: eeschema/tools/ee_actions.cpp:682
msgid "Assign a different symbol from the library"
msgstr "라이브러리에서 다른 심볼 할당"

#: eeschema/tools/ee_actions.cpp:688
msgid "Update Symbol..."
msgstr "심볼 업데이트..."

#: eeschema/tools/ee_actions.cpp:689
msgid "Update symbol to include any changes from the library"
msgstr "라이브러리의 변경점을 포함시키기 위해 심볼 업데이트"

#: eeschema/tools/ee_actions.cpp:695 pcbnew/tools/pcb_actions.cpp:1119
msgid "Assign Netclass..."
msgstr "네트클래스 할당하기..."

#: eeschema/tools/ee_actions.cpp:696 pcbnew/tools/pcb_actions.cpp:1120
msgid "Assign a netclass to nets matching a pattern"
msgstr "패턴과 일치하는 네트에 네트클래스 할당"

#: eeschema/tools/ee_actions.cpp:702
msgid "De Morgan Conversion"
msgstr "드 모르간 변환"

#: eeschema/tools/ee_actions.cpp:703
msgid "Switch between De Morgan representations"
msgstr "드 모르간 표현 간 전환"

#: eeschema/tools/ee_actions.cpp:709
msgid "De Morgan Standard"
msgstr "드 모르간 표준"

#: eeschema/tools/ee_actions.cpp:710
msgid "Switch to standard De Morgan representation"
msgstr "표준 드 모르간 표현으로 전환"

#: eeschema/tools/ee_actions.cpp:716
msgid "De Morgan Alternate"
msgstr "드 모르간 대체"

#: eeschema/tools/ee_actions.cpp:717
msgid "Switch to alternate De Morgan representation"
msgstr "대체 드 모르간 표현으로 전환"

#: eeschema/tools/ee_actions.cpp:723
msgid "Change to Label"
msgstr "라벨로 바꾸기"

#: eeschema/tools/ee_actions.cpp:724
msgid "Change existing item to a label"
msgstr "기존 항목을 라벨로 변경"

#: eeschema/tools/ee_actions.cpp:732
msgid "Change to Directive Label"
msgstr "지시문 레이블로 변경"

#: eeschema/tools/ee_actions.cpp:733
msgid "Change existing item to a directive label"
msgstr "기존 항목을 지시문 레이블로 변경"

#: eeschema/tools/ee_actions.cpp:741
msgid "Change to Hierarchical Label"
msgstr "계층 라벨로 변경"

#: eeschema/tools/ee_actions.cpp:742
msgid "Change existing item to a hierarchical label"
msgstr "기존 항목을 계층 라벨로 변경"

#: eeschema/tools/ee_actions.cpp:750
msgid "Change to Global Label"
msgstr "전역 라벨로 바꾸기"

#: eeschema/tools/ee_actions.cpp:751
msgid "Change existing item to a global label"
msgstr "기존 항목을 전역 라벨로 변경"

#: eeschema/tools/ee_actions.cpp:759
msgid "Change to Text"
msgstr "텍스트로 바꾸기"

#: eeschema/tools/ee_actions.cpp:760
msgid "Change existing item to a text comment"
msgstr "존재하는 개체를 텍스트 주석으로 변환"

#: eeschema/tools/ee_actions.cpp:768
msgid "Change to Text Box"
msgstr "텍스트 상자로 변경"

#: eeschema/tools/ee_actions.cpp:769
msgid "Change existing item to a text box"
msgstr "기존 항목을 텍스트 상자로 변경"

#: eeschema/tools/ee_actions.cpp:777 eeschema/tools/sch_edit_tool.cpp:2432
msgid "Cleanup Sheet Pins"
msgstr "시트 핀 비우기"

#: eeschema/tools/ee_actions.cpp:778
msgid "Delete unreferenced sheet pins"
msgstr "참조되지 않은 시트 핀 제거"

#: eeschema/tools/ee_actions.cpp:783 pcbnew/tools/pcb_actions.cpp:836
msgid "Edit Text & Graphics Properties..."
msgstr "텍스트 및 그래픽 속성 편집..."

#: eeschema/tools/ee_actions.cpp:784
msgid "Edit text and graphics properties globally across schematic"
msgstr "회로도 전체에서 전역적으로 텍스트 및 그래픽 속성 편집"

#: eeschema/tools/ee_actions.cpp:790
msgid "Symbol Properties..."
msgstr "심볼 속성..."

#: eeschema/tools/ee_actions.cpp:791
msgid "Displays symbol properties dialog"
msgstr "심볼 속성 대화 상자 표시"

#: eeschema/tools/ee_actions.cpp:797
msgid "Pin Table..."
msgstr "핀 테이블..."

#: eeschema/tools/ee_actions.cpp:798
msgid "Displays pin table for bulk editing of pins"
msgstr "핀 일괄 편집을 위해 핀 테이블 표시"

#: eeschema/tools/ee_actions.cpp:804
msgid "Break"
msgstr "분리"

#: eeschema/tools/ee_actions.cpp:805
msgid "Divide into connected segments"
msgstr "연결된 세그먼트로 나누기"

#: eeschema/tools/ee_actions.cpp:811
msgid "Slice"
msgstr "분할"

#: eeschema/tools/ee_actions.cpp:812
msgid "Divide into unconnected segments"
msgstr "연결되지 않은 세그먼트로 나누기"

#: eeschema/tools/ee_actions.cpp:826 pcbnew/tools/pcb_actions.cpp:1241
msgid "Highlight net under cursor"
msgstr "커서 아래 네트 강조"

#: eeschema/tools/ee_actions.cpp:833 pcbnew/tools/pcb_actions.cpp:1256
msgid "Clear Net Highlighting"
msgstr "네트 강조 표시 삭제"

#: eeschema/tools/ee_actions.cpp:834 pcbnew/tools/pcb_actions.cpp:1257
msgid "Clear any existing net highlighting"
msgstr "기존 네트 강조 표시 지우기"

#: eeschema/tools/ee_actions.cpp:843
msgid "Highlight Nets"
msgstr "네트 강조"

#: eeschema/tools/ee_actions.cpp:844
msgid "Highlight wires and pins of a net"
msgstr "네트의 도선과 핀 강조"

#: eeschema/tools/ee_actions.cpp:851
msgid "Show Net Navigator"
msgstr "네트 탐색기 표시"

#: eeschema/tools/ee_actions.cpp:852
msgid "Toggle the net navigator panel visibility"
msgstr "네트 탐색기 패널 표시 여부 전환"

#: eeschema/tools/ee_actions.cpp:859
msgid "Edit with Symbol Editor"
msgstr "심볼 편집기로 편집"

#: eeschema/tools/ee_actions.cpp:860
msgid "Open the selected symbol in the Symbol Editor"
msgstr "심볼 편집기에서 선택한 심볼 열기"

#: eeschema/tools/ee_actions.cpp:866
msgid "Exclude from Bill of Materials"
msgstr "BOM에서 제외"

#: eeschema/tools/ee_actions.cpp:867
msgid "Set the exclude from bill of materials attribute"
msgstr "BOM에서 제외 속성 설정"

#: eeschema/tools/ee_actions.cpp:872
msgid "Include in Bill of Materials"
msgstr "BOM에 포함"

#: eeschema/tools/ee_actions.cpp:873
msgid "Clear the exclude from bill of materials attribute"
msgstr "BOM에서 제외 속성 지우기"

#: eeschema/tools/ee_actions.cpp:878
msgid "Toggle Exclude from Bill of Materials"
msgstr "BOM에서 제외 토글"

#: eeschema/tools/ee_actions.cpp:879
msgid "Toggle the exclude from bill of materials attribute"
msgstr "BOM에서 제외 속성 토글"

#: eeschema/tools/ee_actions.cpp:884
msgid "Exclude from Simulation"
msgstr "시뮬레이션에서 제외"

#: eeschema/tools/ee_actions.cpp:885
msgid "Set the exclude from simulation attribute"
msgstr "시뮬레이션 속성에서 제외 설정"

#: eeschema/tools/ee_actions.cpp:890
msgid "Include in Simulation"
msgstr "시뮬레이션에 포함"

#: eeschema/tools/ee_actions.cpp:891
msgid "Clear the exclude from simulation attribute"
msgstr "시뮬레이션에서 제외 속성 선택 취소"

#: eeschema/tools/ee_actions.cpp:896
msgid "Toggle Exclude from Simulation"
msgstr "시뮬레이션에서 제외 토글"

#: eeschema/tools/ee_actions.cpp:897
msgid "Toggle the exclude from simulation attribute"
msgstr "시뮬레이션에서 제외 속성 토글"

#: eeschema/tools/ee_actions.cpp:902
msgid "Exclude from Board"
msgstr "기판에서 제외"

#: eeschema/tools/ee_actions.cpp:903
msgid "Set the exclude from board attribute"
msgstr "보드에서 제외 속성 설정"

#: eeschema/tools/ee_actions.cpp:908
msgid "Include on Board"
msgstr "기판에 포함"

#: eeschema/tools/ee_actions.cpp:909
msgid "Clear the exclude from board attribute"
msgstr "보드에서 제외 속성 지우기"

#: eeschema/tools/ee_actions.cpp:914
msgid "Toggle Exclude from Board"
msgstr "기판에서 제외 토글"

#: eeschema/tools/ee_actions.cpp:915
msgid "Toggle the exclude from board attribute"
msgstr "보드에서 제외하기 속성 토글"

#: eeschema/tools/ee_actions.cpp:920
msgid "Set Do Not Populate"
msgstr "채우지 않도록 설정"

#: eeschema/tools/ee_actions.cpp:921
msgid "Set the do not populate attribute"
msgstr "채우기 안 함 속성 설정"

#: eeschema/tools/ee_actions.cpp:926
msgid "Unset Do Not Populate"
msgstr "부착하지 않음 설정 해제"

#: eeschema/tools/ee_actions.cpp:927
msgid "Clear the do not populate attribute"
msgstr "부착하지 않음 속성 지우기"

#: eeschema/tools/ee_actions.cpp:933
msgid "Toggle Do Not Populate"
msgstr "부착하지 않음 토글"

#: eeschema/tools/ee_actions.cpp:934
msgid "Toggle the do not populate attribute"
msgstr "부착하지 않음 속성 토글"

#: eeschema/tools/ee_actions.cpp:941
msgid "Open the library symbol in the Symbol Editor"
msgstr "심볼 편집기에서 심볼 라이브러리 열기"

#: eeschema/tools/ee_actions.cpp:947
msgid "Edit Symbol Fields..."
msgstr "심볼 필드 테이블 ..."

#: eeschema/tools/ee_actions.cpp:948
msgid "Bulk-edit fields of all symbols in schematic"
msgstr "심볼 필드 테이블 편집기"

#: eeschema/tools/ee_actions.cpp:954
msgid "Edit Symbol Library Links..."
msgstr "심볼 라이브러리 링크 편집..."

#: eeschema/tools/ee_actions.cpp:955
msgid "Edit links between schematic and library symbols"
msgstr "회로도와 라이브러리 심볼의 연결 편집"

#: eeschema/tools/ee_actions.cpp:961
msgid "Assign Footprints..."
msgstr "풋프린트 할당..."

#: eeschema/tools/ee_actions.cpp:962
msgid "Run footprint assignment tool"
msgstr "풋프린트 할당 도구 실행"

#: eeschema/tools/ee_actions.cpp:968
msgid "Import Footprint Assignments..."
msgstr "풋프린트 할당 가져오기..."

#: eeschema/tools/ee_actions.cpp:969
msgid ""
"Import symbol footprint assignments from .cmp file created by board editor"
msgstr "보드 편집기에서 만든 .cmp 파일에서 심볼 풋프린트 할당 가져오기"

#: eeschema/tools/ee_actions.cpp:975
msgid "Annotate Schematic..."
msgstr "회로도 주석 달기..."

#: eeschema/tools/ee_actions.cpp:976
msgid "Fill in schematic symbol reference designators"
msgstr "회로도 주석 달기"

#: eeschema/tools/ee_actions.cpp:982
msgid "Schematic Setup..."
msgstr "회로도 설정 ..."

#: eeschema/tools/ee_actions.cpp:983
msgid "Edit schematic setup including annotation styles and electrical rules"
msgstr "주석 스타일과 전기 규칙을 포함한 회로도 설정을 편집"

#: eeschema/tools/ee_actions.cpp:989
msgid "Edit Sheet Page Number..."
msgstr "시트 페이지 번호 편집..."

#: eeschema/tools/ee_actions.cpp:990
msgid "Edit the page number of the current or selected sheet"
msgstr "현재 또는 선택한 시트의 페이지 번호 편집"

#: eeschema/tools/ee_actions.cpp:995
msgid "Rescue Symbols..."
msgstr "심볼 복구..."

#: eeschema/tools/ee_actions.cpp:996
msgid "Find old symbols in project and rename/rescue them"
msgstr "프로젝트에서 오래된 심볼을 찾아, 이름을 바꾸거나 복구합니다"

#: eeschema/tools/ee_actions.cpp:1002
msgid "Remap Legacy Library Symbols..."
msgstr "이전 형식의 라이브러리 심볼을 매핑 ..."

#: eeschema/tools/ee_actions.cpp:1003
msgid ""
"Remap library symbol references in legacy schematics to the symbol library "
"table"
msgstr "오래된 회로도의 라이브러리 심볼 참조를 심볼 라이브러리 테이블에 리매핑"

#: eeschema/tools/ee_actions.cpp:1009
msgid "Export Drawing to Clipboard"
msgstr "도면을 클립보드로내보내기"

#: eeschema/tools/ee_actions.cpp:1010
msgid "Export drawing of current sheet to clipboard"
msgstr "현재 시트의 도면을 클립보드로 내보내기"

#: eeschema/tools/ee_actions.cpp:1018 pcbnew/tools/pcb_actions.cpp:329
msgid "Import Graphics..."
msgstr "그래픽 가져오기..."

#: eeschema/tools/ee_actions.cpp:1019 pcbnew/tools/pcb_actions.cpp:330
msgid "Import 2D drawing file"
msgstr "2D 도면 파일 가져오기"

#: eeschema/tools/ee_actions.cpp:1026
msgid "Switch to PCB Editor"
msgstr "PCB 편집기로 전환"

#: eeschema/tools/ee_actions.cpp:1027
msgid "Open PCB in board editor"
msgstr "PCB 편집기 열기"

#: eeschema/tools/ee_actions.cpp:1033
msgid "Export Netlist..."
msgstr "네트리스트 내보내기..."

#: eeschema/tools/ee_actions.cpp:1034
msgid "Export file containing netlist in one of several formats"
msgstr "여러 포맷 중 하나로 네트 리스트가 포함된 파일 내보내기"

#: eeschema/tools/ee_actions.cpp:1040
msgid "Generate Bill of Materials..."
msgstr "BOM 생성..."

#: eeschema/tools/ee_actions.cpp:1041
msgid "Generate a bill of materials for the current schematic"
msgstr "현재 회로도에 대한 BOM 생성"

#: eeschema/tools/ee_actions.cpp:1047
msgid "Generate Legacy Bill of Materials..."
msgstr "기존 BOM 생성..."

#: eeschema/tools/ee_actions.cpp:1048
msgid ""
"Generate a bill of materials for the current schematic (Legacy Generator)"
msgstr "현재 회로도에 대한 BOM 생성('기존 생성기')"

#: eeschema/tools/ee_actions.cpp:1054
msgid "Generate Bill of Materials (External)..."
msgstr "BOM 생성(외부)..."

#: eeschema/tools/ee_actions.cpp:1055
msgid ""
"Generate a bill of materials for the current schematic using external "
"generator"
msgstr "외부 생성기를 사용하여 현재 회로도에 대한 BOM 생성"

#: eeschema/tools/ee_actions.cpp:1061
msgid "Export Symbols to Library..."
msgstr "라이브러리로 심볼 내보내기..."

#: eeschema/tools/ee_actions.cpp:1062
msgid ""
"Add symbols used in schematic to an existing symbol library\n"
"(does not remove other symbols from this library)"
msgstr ""
"회로도에서 사용되는 심볼을 기존 심볼 라이브러리에 추가함\n"
"(이 라이브러리에서 다른 심볼을 제거하지 않음)"

#: eeschema/tools/ee_actions.cpp:1069
msgid "Export Symbols to New Library..."
msgstr "새 라이브러리로 심볼 내보내기..."

#: eeschema/tools/ee_actions.cpp:1070
msgid ""
"Create a new symbol library using the symbols used in the schematic\n"
"(if the library already exists it will be replaced)"
msgstr ""
"회로도에 사용된 심볼을 사용하여 새 심볼 라이브러리 생성\n"
"(이미 존재하는 라이브러리는 대체됨)"

#: eeschema/tools/ee_actions.cpp:1077
msgid "Select on PCB"
msgstr "PCB에서 선택"

#: eeschema/tools/ee_actions.cpp:1078
msgid "Select corresponding items in PCB editor"
msgstr "PCB 편집기에서 해당 항목 선택"

#: eeschema/tools/ee_actions.cpp:1084
msgid "Show Hidden Pins"
msgstr "숨은 핀 표시"

#: eeschema/tools/ee_actions.cpp:1085
msgid "Toggle display of hidden pins"
msgstr "숨은 핀 표시 전환"

#: eeschema/tools/ee_actions.cpp:1091
msgid "Show Hidden Fields"
msgstr "숨은 필드 표시"

#: eeschema/tools/ee_actions.cpp:1092
msgid "Toggle display of hidden text fields"
msgstr "비표시 텍스트 필드의 표시 전환"

#: eeschema/tools/ee_actions.cpp:1097
msgid "Show Directive Labels"
msgstr "지시문 라벨 표시"

#: eeschema/tools/ee_actions.cpp:1098
msgid "Toggle display of directive labels"
msgstr "지시문 라벨 표시 토글"

#: eeschema/tools/ee_actions.cpp:1103
msgid "Show ERC Warnings"
msgstr "ERC 경고 표시"

#: eeschema/tools/ee_actions.cpp:1104
msgid "Show markers for electrical rules checker warnings"
msgstr "전기 규칙 검사기 경고에 대한 마커 표시"

#: eeschema/tools/ee_actions.cpp:1109
msgid "Show ERC Errors"
msgstr "ERC 오류 표시"

#: eeschema/tools/ee_actions.cpp:1110
msgid "Show markers for electrical rules checker errors"
msgstr "전기 규칙 검사기 오류에 대한 마커 표시"

#: eeschema/tools/ee_actions.cpp:1115
msgid "Show ERC Exclusions"
msgstr "ERC 제외 표시"

#: eeschema/tools/ee_actions.cpp:1116
msgid "Show markers for excluded electrical rules checker violations"
msgstr "제외된 전기 규칙 검사기 위반에 대한 마커 표시"

#: eeschema/tools/ee_actions.cpp:1121
msgid "Show OP Voltages"
msgstr "OP 전압 표시"

#: eeschema/tools/ee_actions.cpp:1122
msgid "Show operating point voltage data from simulation"
msgstr "시뮬레이션에서 동작점 전압 데이터 표시"

#: eeschema/tools/ee_actions.cpp:1127
msgid "Show OP Currents"
msgstr "OP 전류 표시"

#: eeschema/tools/ee_actions.cpp:1128
msgid "Show operating point current data from simulation"
msgstr "시뮬레이션에서 동작점 현재 데이터 표시"

#: eeschema/tools/ee_actions.cpp:1133 eeschema/tools/ee_actions.cpp:1142
#: eeschema/tools/ee_actions.cpp:1151 eeschema/tools/ee_actions.cpp:1161
msgid "Line Mode for Wires and Buses"
msgstr "전선 및 버스용 직선 배치 모드"

#: eeschema/tools/ee_actions.cpp:1134
msgid "Draw and drag at any angle"
msgstr "어떤 각도로든 그리기 및 드래그"

#: eeschema/tools/ee_actions.cpp:1143
msgid "Constrain drawing and dragging to horizontal or vertical motions"
msgstr "드로잉 및 드래그를 수평 또는 수직 동작으로 제한"

#: eeschema/tools/ee_actions.cpp:1152
msgid ""
"Constrain drawing and dragging to horizontal, vertical, or 45-degree angle "
"motions"
msgstr "드로잉 및 드래그를 수평, 수직 또는 45도 각도 동작으로 제한"

#: eeschema/tools/ee_actions.cpp:1162
msgid "Switch to next line mode"
msgstr "다음 라인 모드로 전환"

#: eeschema/tools/ee_actions.cpp:1167
msgid "Annotate Automatically"
msgstr "자동으로 주석 달기"

#: eeschema/tools/ee_actions.cpp:1168
msgid "Toggle automatic annotation of new symbols"
msgstr "새 심볼의 자동 주석 토글"

#: eeschema/tools/ee_actions.cpp:1174
msgid "Repair Schematic"
msgstr "회로도 복구"

#: eeschema/tools/ee_actions.cpp:1175
msgid "Run various diagnostics and attempt to repair schematic"
msgstr "다양한 진단 실행 및 회로도 복구 시도"

#: eeschema/tools/ee_actions.cpp:1182 pcbnew/tools/pcb_actions.cpp:1334
msgid "Scripting Console"
msgstr "스크립팅 콘솔"

#: eeschema/tools/ee_actions.cpp:1183 pcbnew/tools/pcb_actions.cpp:1335
msgid "Show the Python scripting console"
msgstr "Python 스크립팅 콘솔 창 표시"

#: eeschema/tools/ee_actions.cpp:1191
msgid "Change Sheet"
msgstr "시트 변경"

#: eeschema/tools/ee_actions.cpp:1192
msgid "Change to provided sheet's contents in the schematic editor"
msgstr "회로도 편집기에서 제공된 시트의 내용을 변경합니다"

#: eeschema/tools/ee_actions.cpp:1198
msgid "Enter Sheet"
msgstr "시트로 들어가기"

#: eeschema/tools/ee_actions.cpp:1199
msgid "Display the selected sheet's contents in the schematic editor"
msgstr "회로도 편집기에서 선택한 시트의 내용을 표시합니다"

#: eeschema/tools/ee_actions.cpp:1207
msgid "Leave Sheet"
msgstr "시트 나가기"

#: eeschema/tools/ee_actions.cpp:1208
msgid "Display the parent sheet in the schematic editor"
msgstr "회로도 편집기의 상위 시트를 표시합니다"

#: eeschema/tools/ee_actions.cpp:1215
msgid "Navigate Up"
msgstr "위로 탐색"

#: eeschema/tools/ee_actions.cpp:1216
msgid "Navigate up one sheet in the hierarchy"
msgstr "계층 시트 나가기"

#: eeschema/tools/ee_actions.cpp:1223
msgid "Navigate Back"
msgstr "뒤로 탐색"

#: eeschema/tools/ee_actions.cpp:1224
msgid "Move backward in sheet navigation history"
msgstr "이전 시트로 이동"

#: eeschema/tools/ee_actions.cpp:1231
msgid "Navigate Forward"
msgstr "앞으로 탐색"

#: eeschema/tools/ee_actions.cpp:1232
msgid "Move forward in sheet navigation history"
msgstr "다음 시트로 이동"

#: eeschema/tools/ee_actions.cpp:1239
msgid "Previous Sheet"
msgstr "이전 시트"

#: eeschema/tools/ee_actions.cpp:1240
msgid "Move to previous sheet by number"
msgstr "번호별로 이전 시트로 이동"

#: eeschema/tools/ee_actions.cpp:1247
msgid "Next Sheet"
msgstr "다음 시트"

#: eeschema/tools/ee_actions.cpp:1248
msgid "Move to next sheet by number"
msgstr "번호로 다음 시트로 이동"

#: eeschema/tools/ee_actions.cpp:1255
msgid "Hierarchy Navigator"
msgstr "계층 탐색기"

#: eeschema/tools/ee_actions.cpp:1256
msgid "Show or hide the schematic sheet hierarchy navigator"
msgstr "회로도 시트 계층 네비게이터를 표시 또는 숨김"

#: eeschema/tools/ee_actions.cpp:1268
msgid "Add Wire"
msgstr "와이어 추가"

#: eeschema/tools/ee_actions.cpp:1269
msgid "Add a wire"
msgstr "도선 추가"

#: eeschema/tools/ee_actions.cpp:1280
msgid "Add Bus"
msgstr "버스 추가"

#: eeschema/tools/ee_actions.cpp:1281
msgid "Add a bus"
msgstr "버스 추가"

#: eeschema/tools/ee_actions.cpp:1291
#: eeschema/tools/sch_line_wire_bus_tool.cpp:71
#: eeschema/tools/sch_line_wire_bus_tool.cpp:120
msgid "Unfold from Bus"
msgstr "버스 전개"

#: eeschema/tools/ee_actions.cpp:1292
msgid "Break a wire out of a bus"
msgstr "버스에서 도선 끊기"

#: eeschema/tools/ee_actions.cpp:1304
msgid "Draw graphic lines"
msgstr "그래픽 선 그리기"

#: eeschema/tools/ee_actions.cpp:1313 pcbnew/tools/pcb_actions.cpp:2348
msgid "Undo Last Segment"
msgstr "마지막 세그먼트 되돌리기"

#: eeschema/tools/ee_actions.cpp:1314
msgid "Walks the current line back one segment."
msgstr "현재의 선을 1 세그먼트만큼 되돌립니다."

#: eeschema/tools/ee_actions.cpp:1321
msgid "Switch Segment Posture"
msgstr "세그먼트 자세 전환"

#: eeschema/tools/ee_actions.cpp:1322
msgid "Switches posture of the current segment."
msgstr "현재 세그먼트의 모양을 전환합니다."

#: eeschema/tools/ee_actions.cpp:1333 eeschema/tools/sch_move_tool.cpp:383
#: eeschema/tools/symbol_editor_move_tool.cpp:108
#: pagelayout_editor/tools/pl_actions.cpp:86
#: pcbnew/dialogs/panel_edit_options_base.cpp:77
#: pcbnew/tools/edit_tool_move_fct.cpp:232 pcbnew/tools/pcb_actions.cpp:447
msgid "Move"
msgstr "이동"

#: eeschema/tools/ee_actions.cpp:1334 pagelayout_editor/tools/pl_actions.cpp:87
#: pcbnew/tools/pcb_actions.cpp:448
msgid "Moves the selected item(s)"
msgstr "선택된 항목 이동"

#: eeschema/tools/ee_actions.cpp:1343 eeschema/tools/sch_move_tool.cpp:383
msgid "Drag"
msgstr "드래그"

#: eeschema/tools/ee_actions.cpp:1344
msgid "Drags the selected item(s)"
msgstr "선택된 항목 드래그"

#: eeschema/tools/ee_actions.cpp:1351
msgid "Align Elements to Grid"
msgstr "그리드에 요소 정렬"

#: eeschema/tools/ee_actions.cpp:1359
msgid "Save Current Sheet Copy As..."
msgstr "현재 시트를 다른이름으로 저장..."

#: eeschema/tools/ee_actions.cpp:1360
msgid "Save a copy of the current sheet to another location or name"
msgstr "현재 시트의 복사본을 다른 경로나 이름으로 저장"

#: eeschema/tools/ee_actions.cpp:1374
msgid "New Analysis Tab..."
msgstr "새 분석 탭..."

#: eeschema/tools/ee_actions.cpp:1382
msgid "Open Workbook..."
msgstr "통합 문서 열기..."

#: eeschema/tools/ee_actions.cpp:1390
msgid "Save Workbook"
msgstr "통합 문서 저장"

#: eeschema/tools/ee_actions.cpp:1398
msgid "Save Workbook As..."
msgstr "다른 이름으로 통합 문서 저장..."

#: eeschema/tools/ee_actions.cpp:1404
msgid "Export Current Plot as PNG..."
msgstr "현재 플롯을 PNG로 내보내기 ..."

#: eeschema/tools/ee_actions.cpp:1410
msgid "Export Current Plot as CSV..."
msgstr "현재 플롯을 CSV로 내보내기 ..."

#: eeschema/tools/ee_actions.cpp:1416
msgid "Show Legend"
msgstr "범례 보기"

#: eeschema/tools/ee_actions.cpp:1422
msgid "Dotted Current/Phase"
msgstr "점선 전류/위상"

#: eeschema/tools/ee_actions.cpp:1423
msgid "Draw secondary signal trace (current or phase) with a dotted line"
msgstr "점선으로 2차 신호 트레이스(전류 또는 위상) 그리기"

#: eeschema/tools/ee_actions.cpp:1428
msgid "Dark Mode Plots"
msgstr "암흑 모드 플롯"

#: eeschema/tools/ee_actions.cpp:1429
msgid "Draw plots with a black background"
msgstr "검은색 배경으로 플롯 그리기"

#: eeschema/tools/ee_actions.cpp:1434
msgid "Edit Analysis Tab..."
msgstr "분석 탭 편집..."

#: eeschema/tools/ee_actions.cpp:1435
msgid "Edit the SPICE command and plot setup for the current analysis tab"
msgstr "현재 분석 탭의 SPICE 명령 및 플롯 설정을 편집"

#: eeschema/tools/ee_actions.cpp:1442
msgid "Run Simulation"
msgstr "시뮬레이터 실행"

#: eeschema/tools/ee_actions.cpp:1448
msgid "Stop Simulation"
msgstr "시뮬레이션 중지"

#: eeschema/tools/ee_actions.cpp:1455
msgid "Probe Schematic..."
msgstr "회로도 검사..."

#: eeschema/tools/ee_actions.cpp:1456
msgid "Add a simulator probe"
msgstr "시뮬레이터 프로브 추가"

#: eeschema/tools/ee_actions.cpp:1463
msgid "Add Tuned Value..."
msgstr "조정된 값 추가..."

#: eeschema/tools/ee_actions.cpp:1464
msgid "Select a value to be tuned"
msgstr "조정하고 싶은 값을 선택하세요"

#: eeschema/tools/ee_actions.cpp:1470
msgid "User-defined Signals..."
msgstr "사용자 정의 신호..."

#: eeschema/tools/ee_actions.cpp:1471
msgid "Add, edit or delete user-defined simulation signals"
msgstr "사용자 정의 시뮬레이션 신호 추가, 수정 또는 삭제"

#: eeschema/tools/ee_actions.cpp:1477
msgid "Show SPICE Netlist"
msgstr "SPICE 네트리스트 보기"

#: eeschema/tools/ee_inspection_tool.cpp:237
msgid "No symbol issues found."
msgstr "심볼 문제가 발견되지 않았습니다."

#: eeschema/tools/ee_inspection_tool.cpp:241
msgid "Symbol Warnings"
msgstr "심볼 경고"

#: eeschema/tools/ee_inspection_tool.cpp:263
msgid "Select a symbol to diff against its library equivalent."
msgstr "라이브러리에 해당하는 심볼과 비교할 심볼을 선택합니다."

#: eeschema/tools/ee_inspection_tool.cpp:274
#, c-format
msgid "Symbol %s"
msgstr "심볼 %s"

#: eeschema/tools/ee_inspection_tool.cpp:280
#: pcbnew/tools/board_inspection_tool.cpp:1489
msgid "Summary"
msgstr "요약"

#: eeschema/tools/ee_inspection_tool.cpp:282
msgid "Schematic vs library diff for:"
msgstr "회로도와 라이브러리의 차이점:"

#: eeschema/tools/ee_inspection_tool.cpp:284
#: pcbnew/dialogs/dialog_footprint_associations.cpp:47
#: pcbnew/tools/board_inspection_tool.cpp:1493
msgid "Library: "
msgstr "라이브러리: "

#: eeschema/tools/ee_inspection_tool.cpp:285
#: pcbnew/tools/board_inspection_tool.cpp:1494
msgid "Library item: "
msgstr "라이브러리 항목: "

#: eeschema/tools/ee_inspection_tool.cpp:295
#: pcbnew/tools/board_inspection_tool.cpp:1512
msgid "The library is not included in the current configuration."
msgstr "현재 설정에 라이브러리가 포함되어 있지 않습니다."

#: eeschema/tools/ee_inspection_tool.cpp:297
#: eeschema/tools/ee_inspection_tool.cpp:303
msgid "Manage Symbol Libraries"
msgstr "심볼 라이브러리 관리"

#: eeschema/tools/ee_inspection_tool.cpp:301
#: pcbnew/tools/board_inspection_tool.cpp:1520
msgid "The library is not enabled in the current configuration."
msgstr "현재 설정에는 라이브러리가 활성화되지 않았습니다."

#: eeschema/tools/ee_inspection_tool.cpp:321
#: pcbnew/tools/board_inspection_tool.cpp:1540
#, c-format
msgid "The library no longer contains the item %s."
msgstr "라이브러리에 더 이상 %s 항목이 포함되어 있지 않습니다."

#: eeschema/tools/ee_inspection_tool.cpp:342
#: pcbnew/tools/board_inspection_tool.cpp:1546
msgid "No relevant differences detected."
msgstr "관련 차이점이 발견되지 않음."

#: eeschema/tools/ee_inspection_tool.cpp:344
#: pcbnew/tools/board_inspection_tool.cpp:1548
msgid "Visual"
msgstr "시각적"

#: eeschema/tools/ee_inspection_tool.cpp:435
msgid "No datasheet defined."
msgstr "정의된 데이터시트가 없습니다."

#: eeschema/tools/ee_point_editor.cpp:537
msgid "Move Point"
msgstr "지점 이동"

#: eeschema/tools/ee_point_editor.cpp:1493
msgid "Add Corner"
msgstr "모서리 추가"

#: eeschema/tools/sch_drawing_tools.cpp:285
msgid "Press <ESC> to cancel symbol creation."
msgstr "<ESC>를 눌러 심볼 생성을 취소하세요."

#: eeschema/tools/sch_drawing_tools.cpp:631 pcbnew/tools/drawing_tool.cpp:649
msgid "Press <ESC> to cancel image creation."
msgstr "<ESC>를 눌러 이미지 생성을 취소하세요."

#: eeschema/tools/sch_drawing_tools.cpp:682
#: pagelayout_editor/pl_editor_frame.cpp:877
#: pagelayout_editor/pl_editor_frame.cpp:885 pcbnew/tools/drawing_tool.cpp:701
#, c-format
msgid "Could not load image from '%s'."
msgstr "'%s'에서 이미지를 불러올 수 없습니다."

#: eeschema/tools/sch_drawing_tools.cpp:781
#: eeschema/tools/symbol_editor_drawing_tools.cpp:677
#: pcbnew/tools/drawing_tool.cpp:1497
msgid "No graphic items found in file."
msgstr "파일에 그래픽 항목이 없습니다."

#: eeschema/tools/sch_drawing_tools.cpp:811
#: eeschema/tools/sch_drawing_tools.cpp:893
#: eeschema/tools/symbol_editor_drawing_tools.cpp:712
#: eeschema/tools/symbol_editor_drawing_tools.cpp:801
msgid "Import Graphic"
msgstr "그래픽 불러오기"

#: eeschema/tools/sch_drawing_tools.cpp:1038
msgid "Junction location contains no joinable wires and/or pins."
msgstr "접합 위치에 접속 가능한 도선 또는 핀이 없습니다."

#: eeschema/tools/sch_drawing_tools.cpp:1490
#: eeschema/tools/symbol_editor_drawing_tools.cpp:181
msgid "Press <ESC> to cancel item creation."
msgstr "<ESC>를 눌러 개체 생성을 취소하세요."

#: eeschema/tools/sch_drawing_tools.cpp:1553
msgid "Click over a sheet."
msgstr "클릭하여 시트 간 이동."

#: eeschema/tools/sch_drawing_tools.cpp:1566
#: eeschema/tools/sch_drawing_tools.cpp:1652
msgid "No new hierarchical labels found."
msgstr "새 계층 라벨을 찾을 수 없습니다."

#: eeschema/tools/sch_drawing_tools.cpp:1579
msgid "Add Sheet Pin"
msgstr "시트 핀 추가"

#: eeschema/tools/sch_drawing_tools.cpp:1855
#: eeschema/tools/symbol_editor_drawing_tools.cpp:479
#, c-format
msgid "Add %s"
msgstr "추가 %s"

#: eeschema/tools/sch_drawing_tools.cpp:1910
#, c-format
msgid "Draw %s"
msgstr "그리기 %s"

#: eeschema/tools/sch_drawing_tools.cpp:2064
msgid "Press <ESC> to cancel sheet creation."
msgstr "<ESC>를 눌러 시트 생성을 취소하세요."

#: eeschema/tools/sch_edit_tool.cpp:77
msgid "Symbol Unit"
msgstr "심볼 단위"

#: eeschema/tools/sch_edit_tool.cpp:126
msgid "Pin Function"
msgstr "핀 기능"

#: eeschema/tools/sch_edit_tool.cpp:176
msgid "Pin Helpers"
msgstr "핀 도우미"

#: eeschema/tools/sch_edit_tool.cpp:455
msgid "Transform Selection"
msgstr "변환 선택"

#: eeschema/tools/sch_edit_tool.cpp:497
msgid "Edit Main Fields"
msgstr "기본 필드 편집하기"

#: eeschema/tools/sch_edit_tool.cpp:510 eeschema/tools/sch_edit_tool.cpp:2341
msgid "Change To"
msgstr "바꾸기"

#: eeschema/tools/sch_edit_tool.cpp:895
#: eeschema/tools/symbol_editor_edit_tool.cpp:194
#: pcbnew/tools/edit_tool.cpp:1821
msgid "Rotate"
msgstr "회전"

#: eeschema/tools/sch_edit_tool.cpp:1093 gerbview/gerber_draw_item.cpp:731
#: pcbnew/pcb_text.cpp:239 pcbnew/pcb_textbox.cpp:364
#: pcbnew/tools/edit_tool.cpp:2023
msgid "Mirror"
msgstr "미러"

#: eeschema/tools/sch_edit_tool.cpp:1255
msgid "Label value cannot go below zero"
msgstr "라벨 값은 0보다 작아서는 안 됩니다"

#: eeschema/tools/sch_edit_tool.cpp:1322
msgid "Repeat Item"
msgstr "반복 항목"

#: eeschema/tools/sch_edit_tool.cpp:1530 eeschema/tools/sch_edit_tool.cpp:1533
#: eeschema/tools/symbol_editor_edit_tool.cpp:558
#, c-format
msgid "Edit %s Field"
msgstr "편집 %s 필드"

#: eeschema/tools/sch_edit_tool.cpp:1535
#: eeschema/tools/symbol_editor_edit_tool.cpp:560
#, c-format
msgid "Edit '%s' Field"
msgstr "'%s' 필드 편집"

#: eeschema/tools/sch_edit_tool.cpp:2065 eeschema/tools/sch_edit_tool.cpp:2153
msgid "<empty>"
msgstr "<비어있음>"

#: eeschema/tools/sch_edit_tool.cpp:2405
msgid "Slice Wire"
msgstr "선 분할"

#: eeschema/tools/sch_edit_tool.cpp:2405
msgid "Break Wire"
msgstr "와이어 끊기"

#: eeschema/tools/sch_edit_tool.cpp:2423
msgid "Do you wish to delete the unreferenced pins from this sheet?"
msgstr "참조되지 않은 핀을 이 시트에서 삭제하겠습니까?"

#: eeschema/tools/sch_edit_tool.cpp:2484
#, c-format
msgid "Enter page number for sheet path%s"
msgstr "시트 경로 %s의 페이지 번호를 입력하세요"

#: eeschema/tools/sch_edit_tool.cpp:2487
#: eeschema/widgets/hierarchy_pane.cpp:331
msgid "Edit Sheet Page Number"
msgstr "시트 페이지 번호 편집"

#: eeschema/tools/sch_edit_tool.cpp:2552
msgid "Set Attribute"
msgstr "속성 설정"

#: eeschema/tools/sch_edit_tool.cpp:2589
msgid "Clear Attribute"
msgstr "속성 지우기"

#: eeschema/tools/sch_edit_tool.cpp:2626
msgid "Toggle Attribute"
msgstr "속성 전환"

#: eeschema/tools/sch_editor_control.cpp:152
#, c-format
msgid "Revert '%s' (and all sub-sheets) to last version saved?"
msgstr ""
"마지막으로 저장된 버전으로 (모든 하위 시트를 포함한) '%s'을(를) 되돌리시겠습"
"니까?"

#: eeschema/tools/sch_editor_control.cpp:342
msgid "Include power symbols in schematic to the library?"
msgstr "라이브러리 회로도에 전원 기호를 포함할까요?"

#: eeschema/tools/sch_editor_control.cpp:407
#, c-format
msgid "Could not add library '%s'."
msgstr "라이브러리 '%s'을(를) 추가 할 수 없음."

#: eeschema/tools/sch_editor_control.cpp:420
msgid "Update symbols in schematic to refer to new library?"
msgstr "새 라이브러리를 참조하도록 회로도의 심볼을 업데이트하시겠습니까?"

#: eeschema/tools/sch_editor_control.cpp:798
msgid "Error: duplicate sub-sheet names found in current sheet."
msgstr "오류: 현재 시트에서 중복되는 하위 시트 이름이 발견되었습니다."

#: eeschema/tools/sch_editor_control.cpp:905
msgid "No net selected."
msgstr "선택한 네트가 없음."

#: eeschema/tools/sch_editor_control.cpp:931
msgid "Net must be labeled to assign a netclass."
msgstr "네트클래스를 할당하려면 네트에 라벨을 지정해야 합니다."

#: eeschema/tools/sch_editor_control.cpp:1745
#, c-format
msgid ""
"The pasted sheet '%s'\n"
"was dropped because the destination already has the sheet or one of its "
"subsheets as a parent."
msgstr ""
"붙여넣은 시트 '%s'\n"
"는 제외되었습니다. 목적지 또는 목적지의 하위 시트 중 해당 시트를 상위 시트로 "
"갖는 시트가 발견되었습니다."

#: eeschema/tools/sch_editor_control.cpp:2221
msgid "Symbols with broken library symbol links cannot be edited."
msgstr "라이브러리 기호 링크가 끊어진 기호는 편집할 수 없습니다."

#: eeschema/tools/sch_editor_control.cpp:2591
#: pcbnew/tools/board_editor_control.cpp:603
#: pcbnew/tools/footprint_editor_control.cpp:746
#, c-format
msgid "%d duplicate IDs replaced.\n"
msgstr "%d 개의 중복된 ID를 교체하였습니다.\n"

#: eeschema/tools/sch_editor_control.cpp:2598
#: pcbnew/tools/board_editor_control.cpp:618
#: pcbnew/tools/footprint_editor_control.cpp:761
#, c-format
msgid "%d potential problems repaired."
msgstr "%d 개의 잠재적 문제점이 복구되었습니다."

#: eeschema/tools/sch_editor_control.cpp:2605
#: pcbnew/drc/drc_rule_parser.cpp:179
msgid "No errors found."
msgstr "오류가 발견되지 않았습니다."

#: eeschema/tools/sch_find_replace_tool.cpp:334
msgid "Reached end of schematic."
msgstr "회로도의 끝에 도달했습니다."

#: eeschema/tools/sch_find_replace_tool.cpp:335
msgid "Reached end of sheet."
msgstr "시트의 끝."

#: eeschema/tools/sch_find_replace_tool.cpp:339
msgid "Find again to wrap around to the start."
msgstr "처음으로 돌아가서 다시 검색합니다."

#: eeschema/tools/sch_line_wire_bus_tool.cpp:102
msgid "No bus selected"
msgstr "선택된 버스 없음"

#: eeschema/tools/sch_line_wire_bus_tool.cpp:111
msgid "Bus has no members"
msgstr "버스에 멤버가 없습니다"

#: eeschema/tools/sch_line_wire_bus_tool.cpp:705
msgid "Press <ESC> to cancel drawing."
msgstr "<ESC>를 눌러 그리기를 취소하세요."

#: eeschema/tools/sch_line_wire_bus_tool.cpp:1220
msgid "Draw Wires"
msgstr "선 그리기"

#: eeschema/tools/sch_move_tool.cpp:797
msgid "Press <ESC> to cancel drag."
msgstr "<ESC>를 눌러 드래그를 취소하세요."

#: eeschema/tools/sch_move_tool.cpp:799
#: pagelayout_editor/tools/pl_edit_tool.cpp:232
msgid "Press <ESC> to cancel move."
msgstr "<ESC>를 눌러 이동을 취소하세요."

#: eeschema/tools/sch_move_tool.cpp:1753
#: eeschema/tools/symbol_editor_move_tool.cpp:505
msgid "Align"
msgstr "정렬"

#: eeschema/tools/sch_navigate_tool.cpp:81
#, c-format
msgid "Page '%s' not found."
msgstr "'%s' 페이지를 찾을 수 없음."

#: eeschema/tools/simulator_control.cpp:94
msgid "Open Simulation Workbook"
msgstr "시뮬레이션 통합 문서 열기"

#: eeschema/tools/simulator_control.cpp:113
msgid "noname"
msgstr "이름 없음"

#: eeschema/tools/simulator_control.cpp:146
msgid "Save Simulation Workbook As"
msgstr "시뮬레이션 통합 문서 저장"

#: eeschema/tools/simulator_control.cpp:166
msgid "Save Plot as Image"
msgstr "플롯을 이미지로 저장"

#: eeschema/tools/simulator_control.cpp:191
msgid "Save Plot Data"
msgstr "플롯 데이터 저장"

#: eeschema/tools/simulator_control.cpp:406
msgid "SPICE Netlist"
msgstr "SPICE 네트리스트"

#: eeschema/tools/symbol_editor_control.cpp:181
msgid "No symbol library selected."
msgstr "선택한 심볼 라이브러리가 없습니다."

#: eeschema/tools/symbol_editor_control.cpp:301
#: eeschema/widgets/panel_symbol_chooser.cpp:663
msgid "No symbol selected"
msgstr "선택된 심볼 없음"

#: eeschema/tools/symbol_editor_control.cpp:327
#: pcbnew/tools/footprint_editor_control.cpp:406
msgid "New name:"
msgstr "새 이름:"

#: eeschema/tools/symbol_editor_control.cpp:327
msgid "Change Symbol Name"
msgstr "심볼 이름 변경"

#: eeschema/tools/symbol_editor_control.cpp:569
#: eeschema/tools/symbol_editor_control.cpp:607
msgid "No symbol to export"
msgstr "내보낼 심볼이 없습니다"

#: eeschema/tools/symbol_editor_control.cpp:578
#: pcbnew/footprint_edit_frame.cpp:1375
msgid "Export View as PNG"
msgstr "뷰를 PNG로 내보내기"

#: eeschema/tools/symbol_editor_control.cpp:589
#, c-format
msgid "Can't save file '%s'."
msgstr "파일 '%s'을(를) 저장할 수 없습니다."

#: eeschema/tools/symbol_editor_control.cpp:616
msgid "SVG File Name"
msgstr "SVG 파일 이름"

#: eeschema/tools/symbol_editor_edit_tool.cpp:650
#: eeschema/tools/symbol_editor_pin_tool.cpp:190
msgid "Edit Pin Properties"
msgstr "핀 속성 수정"

#: eeschema/tools/symbol_editor_edit_tool.cpp:666
msgid "Symbol is not derived from another symbol."
msgstr "심볼이 다른 심볼로부터 파생되지 않았습니다."

#: eeschema/tools/symbol_editor_edit_tool.cpp:694
#, c-format
msgid "Enter display name for unit %s"
msgstr "유닛 %s의 표시 이름 입력"

#: eeschema/tools/symbol_editor_edit_tool.cpp:703
msgid "Set Unit Display Name"
msgstr "장치 표시 이름 설정"

#: eeschema/tools/symbol_editor_pin_tool.cpp:230
#, c-format
msgid "This position is already occupied by another pin, in unit %d."
msgstr "유닛 %d 안의 해당 위치에 이미 다른 핀이 존재합니다."

#: eeschema/tools/symbol_editor_pin_tool.cpp:234
msgid "Place Pin Anyway"
msgstr "강제로 핀 배치"

#: eeschema/widgets/filedlg_hook_save_project.h:32
msgid "Create a new project for this schematic"
msgstr "이 회로도로부터 새로운 프로젝트 생성"

#: eeschema/widgets/hierarchy_pane.cpp:319
msgid "Edit Page Number"
msgstr "페이지 번호 편집"

#: eeschema/widgets/hierarchy_pane.cpp:327
#, c-format
msgid "Enter page number for sheet path %s"
msgstr "시트 경로 %s의 페이지 번호 입력"

#: eeschema/widgets/hierarchy_pane.cpp:371
#, c-format
msgid "(page %s)"
msgstr "(페이지 %s)"

#: eeschema/widgets/panel_symbol_chooser.cpp:168
#: pcbnew/widgets/panel_footprint_chooser.cpp:91
msgid "Recently Used"
msgstr "최근에 사용"

#: eeschema/widgets/panel_symbol_chooser.cpp:174
msgid "Already Placed"
msgstr "이미 배치됨"

#: eeschema/widgets/panel_symbol_chooser.cpp:562
msgid "No footprint specified"
msgstr "지정된 풋프린트 없음"

#: eeschema/widgets/panel_symbol_chooser.cpp:575
msgid "Invalid footprint specified"
msgstr "잘못된 풋프린트 지정"

#: eeschema/widgets/sch_properties_panel.cpp:202
#: pcbnew/widgets/pcb_properties_panel.cpp:231
msgid "Change property"
msgstr "속성 변경"

#: eeschema/widgets/search_handlers.cpp:136
#, fuzzy
msgid "Excl. sim"
msgstr "제외"

#: eeschema/widgets/search_handlers.cpp:137
#, fuzzy
msgid "Excl. BOM"
msgstr "BOM에서 제외됨"

#: eeschema/widgets/search_handlers.cpp:138
#, fuzzy
msgid "Excl. board"
msgstr "클립보드"

#: eeschema/widgets/search_handlers.cpp:355
#, fuzzy
msgid "Hierarchical"
msgstr "계층 경로"

#: eeschema/widgets/search_handlers.cpp:357
#, fuzzy
msgid "Directive"
msgstr "지시문 레이블"

#: eeschema/widgets/symbol_filedlg_save_as.h:33
msgid "Do not update library tables"
msgstr "라이브러리 테이블을 업데이트하지 마십시오"

#: eeschema/widgets/symbol_filedlg_save_as.h:35
msgid "Update existing library table entry"
msgstr "기존 라이브러리 테이블 업데이트"

#: eeschema/widgets/symbol_filedlg_save_as.h:37
msgid "Add new global library table entry"
msgstr "새로운 전역 라이브러리 테이블 항목 추가"

#: eeschema/widgets/symbol_filedlg_save_as.h:39
msgid "Add new project library table entry"
msgstr "새 프로젝트 라이브러리 테이블 항목 추가"

#: eeschema/widgets/tuner_slider.cpp:58 eeschema/widgets/tuner_slider.cpp:114
#, c-format
msgid "Tune %s"
msgstr "조정 %s"

#: eeschema/widgets/tuner_slider.cpp:75
#, c-format
msgid "%s has simulation model of type '%s %s'; only RLC passives be tuned"
msgstr "%s에 '%s %s' 유형의 시뮬레이션 모델이 있음; RLC 수동부품만 조정됨"

#: gerbview/clear_gbr_drawlayers.cpp:47
msgid "Current data will be lost?"
msgstr "현재의 작업 데이터가 손실됩니다. 계속하시겠습니까?"

#: gerbview/clear_gbr_drawlayers.cpp:78
#, c-format
msgid "Clear layer %d?"
msgstr "%d 레이어를 지울까요?"

#: gerbview/dialogs/dialog_draw_layers_settings_base.cpp:21
msgid "Active layer name:"
msgstr "활성 레이어 이름:"

#: gerbview/dialogs/dialog_draw_layers_settings_base.cpp:38
#: pcbnew/dialogs/dialog_position_relative.cpp:167
#: pcbnew/dialogs/dialog_position_relative_base.cpp:66
#: pcbnew/dialogs/dialog_text_properties.cpp:97
msgid "Offset X:"
msgstr "X 오프셋:"

#: gerbview/dialogs/dialog_draw_layers_settings_base.cpp:49
#: pcbnew/dialogs/dialog_position_relative.cpp:168
#: pcbnew/dialogs/dialog_position_relative_base.cpp:83
#: pcbnew/dialogs/dialog_text_properties.cpp:98
msgid "Offset Y:"
msgstr "Y 오프셋:"

#: gerbview/dialogs/dialog_draw_layers_settings_base.cpp:60
msgid "Rotate counterclockwise:"
msgstr "반시계 방향으로 회전:"

#: gerbview/dialogs/dialog_draw_layers_settings_base.cpp:77
msgid "Active layer"
msgstr "활성레이어"

#: gerbview/dialogs/dialog_draw_layers_settings_base.cpp:77
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:87
msgid "All layers"
msgstr "모든 레이어"

#: gerbview/dialogs/dialog_draw_layers_settings_base.cpp:77
msgid "All visible layers"
msgstr "모든 레이어 표시"

#: gerbview/dialogs/dialog_draw_layers_settings_base.h:64
msgid "Layers Settings"
msgstr "레이어 설정"

#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:144
#, c-format
msgid "Layer %d"
msgstr "레이어 %d"

#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:170
#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:229
#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:275
#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:327
#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:377
#: gerbview/dialogs/dialog_select_one_pcb_layer.cpp:143
msgid "Do not export"
msgstr "내보내지 않기"

#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:216
msgid "Gerbers with known layers: "
msgstr "기존 레이어의 거버: "

#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:218
msgid "Automatic Layer Assignment"
msgstr "자동 레이어 할당"

#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:332
#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:385
#: gerbview/dialogs/dialog_select_one_pcb_layer.cpp:135
msgid "Hole data"
msgstr "홀 데이터"

#: gerbview/dialogs/dialog_layers_select_to_pcb.cpp:430
msgid ""
"Exported board does not have enough copper layers to handle selected inner "
"layers"
msgstr ""
"내보내진 기판은 선택한 내부 레이어를 처리할 수 있을 만큼 구리 레이어가 충분하"
"지 않습니다"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:32
msgid "Layer selection:"
msgstr "레이어 선택:"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:78
msgid "Copper layers count:"
msgstr "동박 층 카운트:"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:82
#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:83
msgid "2 Layers"
msgstr "2 레이어"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:84
msgid "4 Layers"
msgstr "4 레이어"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:85
msgid "6 Layers"
msgstr "6 레이어"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:86
msgid "8 Layers"
msgstr "8 레이어"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:87
msgid "10 Layers"
msgstr "10 레이어"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:88
msgid "12 Layers"
msgstr "12 레이어"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:89
msgid "14 Layers"
msgstr "14 레이어"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:90
msgid "16 Layers"
msgstr "16 레이어"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:91
msgid "18 Layers"
msgstr "18 레이어"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:92
msgid "20 Layers"
msgstr "20 레이어"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:93
msgid "22 Layers"
msgstr "22 레이어"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:94
msgid "24 Layers"
msgstr "24 레이어"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:95
msgid "26 Layers"
msgstr "26 레이어"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:96
msgid "28 Layers"
msgstr "28 레이어"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:97
msgid "30 Layers"
msgstr "30 레이어"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:98
msgid "32 Layers"
msgstr "32 레이어"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:110
msgid "Store Choice"
msgstr "선택 내용 저장"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:113
msgid "Get Stored Choice"
msgstr "저장된 선택 사용"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.cpp:116
#: pcbnew/dialogs/dialog_move_exact_base.cpp:35
#: pcbnew/dialogs/dialog_move_exact_base.cpp:49
#: pcbnew/dialogs/dialog_move_exact_base.cpp:63
#: pcbnew/dialogs/dialog_position_relative_base.cpp:80
#: pcbnew/dialogs/dialog_position_relative_base.cpp:97
msgid "Reset"
msgstr "초기화"

#: gerbview/dialogs/dialog_layers_select_to_pcb_base.h:78
msgid "Layer Selection"
msgstr "레이어 선택"

#: gerbview/dialogs/dialog_print_gerbview.cpp:170
#: pcbnew/dialogs/dialog_export_svg_base.cpp:120
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:256
msgid "Print mirrored"
msgstr "대칭 인쇄"

#: gerbview/dialogs/dialog_print_gerbview.cpp:179
msgid "Included Layers"
msgstr "레이어 포함"

#: gerbview/dialogs/dialog_print_gerbview.cpp:193
msgid "Select all"
msgstr "전체 선택"

#: gerbview/dialogs/dialog_print_gerbview.cpp:195
msgid "Deselect all"
msgstr "전체 선택 해제"

#: gerbview/dialogs/dialog_select_one_pcb_layer.cpp:92
#, c-format
msgid "Select Layer: %s"
msgstr "레이어 선택: %s"

#: gerbview/dialogs/panel_gerbview_color_settings.cpp:100
#: gerbview/widgets/gerbview_layer_widget.cpp:129
msgid "DCodes"
msgstr "D코드"

#: gerbview/dialogs/panel_gerbview_color_settings.cpp:101
#: gerbview/widgets/gerbview_layer_widget.cpp:131
msgid "Negative Objects"
msgstr "네거티브 객체"

#: gerbview/dialogs/panel_gerbview_color_settings.cpp:109
#, c-format
msgid "Graphic Layer %d"
msgstr "그래픽 레이어 %d"

#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:37
msgid "Show D codes"
msgstr "D-Code 표시"

#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:41
#: pcbnew/dialogs/panel_edit_options_base.cpp:372
msgid "Show page limits"
msgstr "페이지 경계 표시"

#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:50
msgid "Drawing Mode"
msgstr "그리기 모드"

#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:60
msgid "Sketch flashed items"
msgstr "플래시 개체 스케치"

#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:63
msgid "Sketch lines"
msgstr "선 스케치"

#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:66
msgid "Sketch polygons"
msgstr "다각형 스케치"

#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:75
msgid "Page Size"
msgstr "페이지 크기"

#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:88
msgid "Full size"
msgstr "전체 크기"

#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:88
msgid "Size A4"
msgstr "A4 크기"

#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:88
msgid "Size A3"
msgstr "A3 크기"

#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:88
msgid "Size A2"
msgstr "A2 크기"

#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:88
msgid "Size A"
msgstr "A 크기"

#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:88
msgid "Size B"
msgstr "B 크기"

#: gerbview/dialogs/panel_gerbview_display_options_base.cpp:88
msgid "Size C"
msgstr "C 크기"

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:17
#: pcbnew/dialogs/dialog_export_2581_base.cpp:43
msgid "File Format"
msgstr "파일 형식"

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:27
msgid "These parameters are usually specified in files, but not always."
msgstr ""
"이 매개변수는 주로 파일을 특정하는 데 사용되지만, 항상 그런 것은 아닙니다."

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:33
msgid "File Units"
msgstr "파일 유닛"

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:37
msgid "No leading zeros (TZ format)"
msgstr "선행 0 없음 (TZ 형식)"

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:37
msgid "No trailing zeros (LZ format)"
msgstr "후행 0 없음 (LZ 형식)"

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:39
msgid "Zero Format"
msgstr "제로 형식"

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:41
msgid ""
"Integers in files can have their zeros stripped.\n"
"No leading zeros format means the leading zeros are stripped\n"
"No trailing zeros  format means the trailing zeros are stripped"
msgstr ""
"파일내의 정수는 0이 제거될 수 있습니다.\n"
"선행 0 형식이 없으면 선행 0이 제거됨을 의미함\n"
"후행 0 형식이 없으면 후행 0이 제거됨을 의미함"

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:51
msgid "Coordinates Format"
msgstr "좌표계 형식"

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:61
msgid "The coordinates format is not specified in Excellon format."
msgstr "Excellon 형식에서 좌표계 형식이 지정되지 않았습니다."

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:65
msgid "(The decimal format does not use these settings)"
msgstr "(십진수 형식은 이러한 설정을 사용하지 않습니다)"

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:74
msgid "Format for mm"
msgstr "mm에 대한 형식"

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:81
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:91
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:107
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:117
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:28
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:47
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:112
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:178
msgid "2"
msgstr "2"

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:81
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:91
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:107
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:117
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:48
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:113
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:179
msgid "3"
msgstr "3"

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:81
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:91
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:107
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:117
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:28
#: pcbnew/dialogs/dialog_create_array_base.cpp:443
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:49
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:114
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:180
msgid "4"
msgstr "4"

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:81
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:91
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:107
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:117
#: pcbnew/dialogs/dialog_create_array_base.cpp:44
#: pcbnew/dialogs/dialog_create_array_base.cpp:51
#: pcbnew/dialogs/dialog_create_array_base.cpp:74
#: pcbnew/dialogs/dialog_create_array_base.cpp:87
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:50
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:115
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:181
msgid "5"
msgstr "5"

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:81
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:91
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:107
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:117
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:28
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:51
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:116
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:182
msgid "6"
msgstr "6"

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:87
#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:113
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:405
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:461
msgid ":"
msgstr ":"

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:100
msgid "Format for inches"
msgstr "inch에 대한 형식"

#: gerbview/dialogs/panel_gerbview_excellon_settings_base.cpp:129
msgid "Usually: 3:3 in mm and 2:4 in inches"
msgstr "보통: mm로 3:3, 인치로 2:4"

#: gerbview/events_called_functions.cpp:181 gerbview/gerbview_frame.cpp:162
msgid "Layers Manager"
msgstr "레이어 관리자"

#: gerbview/excellon_read_drill_file.cpp:272
#, c-format
msgid "File %s not found."
msgstr "파일 '%s'을(를) 찾을 수 없습니다."

#: gerbview/excellon_read_drill_file.cpp:284
msgid "No empty layers to load file into."
msgstr "파일을 불러올 빈 레이어가 없습니다."

#: gerbview/excellon_read_drill_file.cpp:291
msgid "Error reading EXCELLON drill file"
msgstr "EXCELLON 드릴 파일 읽기 오류"

#: gerbview/excellon_read_drill_file.cpp:588
#, c-format
msgid "Unknown Excellon command &lt;%s&gt;"
msgstr "알 수 없는 Excellon 명령어 &lt;%s&gt;"

#: gerbview/excellon_read_drill_file.cpp:788
msgid "Tool definition shape not found"
msgstr "도구 정의 모양을 찾을 수 없음"

#: gerbview/excellon_read_drill_file.cpp:791
#, c-format
msgid "Tool definition '%c' not supported"
msgstr "도구 정의 '%c'은(는) 지원되지 않습니다"

#: gerbview/excellon_read_drill_file.cpp:872
#, c-format
msgid "Tool %d not defined"
msgstr "도구 %d 정의되지 않음"

#: gerbview/excellon_read_drill_file.cpp:1058
#, c-format
msgid "Unknown Excellon G Code: &lt;%s&gt;"
msgstr "알 수 없는 Excellon G Code: &lt;%s&gt;"

#: gerbview/files.cpp:43
msgid "<b>No more available layers</b> in GerbView to load files"
msgstr ""
"GerbView에서 파일을 열기 위한 <b>유효한 레이어가 이 이상 존재하지 않습니다</"
"b>"

#: gerbview/files.cpp:44
#, c-format
msgid "<b>Not loaded:</b> <i>%s</i>"
msgstr "<b> 불러오지 않음:</b> <i>%s</i>"

#: gerbview/files.cpp:45
#, c-format
msgid "<b>Memory was exhausted reading:</b> <i>%s</i>"
msgstr "<b>읽어들이는 중 메모리 부족:</b> <i>%s</i>"

#: gerbview/files.cpp:52 gerbview/files.cpp:202
msgid "Gerber files"
msgstr "거버 파일"

#: gerbview/files.cpp:88
msgid "Zip files"
msgstr "Zip 파일"

#: gerbview/files.cpp:105
msgid "Job files"
msgstr "Job 파일"

#: gerbview/files.cpp:182
msgid "Open Autodetected File(s)"
msgstr "자동 감지된 파일 열기"

#: gerbview/files.cpp:205
msgid "Top layer"
msgstr "상단 레이어"

#: gerbview/files.cpp:206
msgid "Bottom layer"
msgstr "하단 레이어"

#: gerbview/files.cpp:207
msgid "Bottom solder resist"
msgstr "하단 솔더 레지스트"

#: gerbview/files.cpp:208
msgid "Top solder resist"
msgstr "상단 솔더 레지스터"

#: gerbview/files.cpp:209
msgid "Bottom overlay"
msgstr "하단 오버레이"

#: gerbview/files.cpp:210
msgid "Top overlay"
msgstr "상단 오버레이"

#: gerbview/files.cpp:211
msgid "Bottom paste"
msgstr "하단 페이스트"

#: gerbview/files.cpp:212
msgid "Top paste"
msgstr "상단 페이스트"

#: gerbview/files.cpp:213
msgid "Keep-out layer"
msgstr "킵아웃 레이어"

#: gerbview/files.cpp:214
msgid "Mechanical layers"
msgstr "기술 레이어"

#: gerbview/files.cpp:218
msgid "Top Pad Master"
msgstr "상단 패드 마스터"

#: gerbview/files.cpp:219
msgid "Bottom Pad Master"
msgstr "하단 솔더 마스터"

#: gerbview/files.cpp:225
msgid "Open Gerber File(s)"
msgstr "거버 파일 열기"

#: gerbview/files.cpp:236
msgid "Open NC (Excellon) Drill File(s)"
msgstr "NC (Excellon) 드릴 파일 열기"

#: gerbview/files.cpp:274
msgid "File not found:"
msgstr "파일을 찾을 수 없음:"

#: gerbview/files.cpp:285
#, c-format
msgid "<b>A gerber job file cannot be loaded as a plot file</b> <i>%s</i>"
msgstr "<b>거버 작업 파일은 플롯 파일로 불러올 수 없습니다.</b> <i>%s</i>"

#: gerbview/files.cpp:298
msgid "Loading files..."
msgstr "파일 로드 중..."

#: gerbview/files.cpp:301 gerbview/files.cpp:308
#, c-format
msgid "Loading %u/%zu %s..."
msgstr "로딩 %u/%zu %s…"

#: gerbview/files.cpp:439
#, c-format
msgid "Zip file '%s' cannot be opened."
msgstr "Zip 파일 '%s'을(를) 열 수 없습니다."

#: gerbview/files.cpp:481
#, c-format
msgid "Skipped file '%s' (gerber job file)."
msgstr "건너뛴 파일 '%s'(거버 작업 파일)."

#: gerbview/files.cpp:526
#, c-format
msgid "<b>Unable to create temporary file '%s'.</b>"
msgstr "<b>임시 파일 '%s'을(를) 만들 수 없습니다.</b>"

#: gerbview/files.cpp:551
#, c-format
msgid "Skipped file '%s' (unknown type)."
msgstr "건너뛴 파일 '%s'(알 수 없는 유형)."

#: gerbview/files.cpp:590
#, c-format
msgid "<b>unzipped file %s read error</b>"
msgstr "<b>압축 해제된 파일 %s 읽기 오류</b>"

#: gerbview/files.cpp:638
msgid "Open Zip File"
msgstr "Zip 파일 열기"

#: gerbview/files.cpp:673 gerbview/job_file_reader.cpp:242
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:164
#: pcbnew/dialogs/dialog_footprint_wizard_list_base.cpp:91
#: pcbnew/dialogs/dialog_gendrill_base.cpp:204
msgid "Messages"
msgstr "메시지"

#: gerbview/gerber_draw_item.cpp:673
msgid "Attribute"
msgstr "속성"

#: gerbview/gerber_draw_item.cpp:676 gerbview/gerber_draw_item.cpp:686
msgid "No attribute"
msgstr "속성 없음"

#: gerbview/gerber_draw_item.cpp:682
#, c-format
msgid "D Code %d"
msgstr "D 코드 %d"

#: gerbview/gerber_draw_item.cpp:695
msgid "Graphic Layer"
msgstr "그래픽 레이어"

#: gerbview/gerber_draw_item.cpp:711
msgid "Start"
msgstr "시작"

#: gerbview/gerber_draw_item.cpp:714
msgid "End"
msgstr "끝"

#: gerbview/gerber_draw_item.cpp:725
msgid "Clear"
msgstr "지우기"

#: gerbview/gerber_draw_item.cpp:726 gerbview/gerber_file_image.cpp:355
msgid "Polarity"
msgstr "극성"

#: gerbview/gerber_draw_item.cpp:735
msgid "AB axis"
msgstr "AB 축"

#: gerbview/gerber_draw_item.cpp:747 gerbview/toolbars_gerber.cpp:142
#: gerbview/toolbars_gerber.cpp:145
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:264
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:28
msgid "Net:"
msgstr "네트:"

#: gerbview/gerber_draw_item.cpp:760
#, c-format
msgid "Cmp: %s  Pad: %s"
msgstr "컴포넌트: %s  패드: %s"

#: gerbview/gerber_draw_item.cpp:766
#, c-format
msgid "Cmp: %s  Pad: %s  Fct %s"
msgstr "컴포넌트: %s  패드: %s  Fct %s"

#: gerbview/gerber_draw_item.cpp:775 gerbview/toolbars_gerber.cpp:129
#: gerbview/toolbars_gerber.cpp:132
msgid "Cmp:"
msgstr "부품:"

#: gerbview/gerber_draw_item.cpp:1036
#, c-format
msgid "%s (D%d) on layer %d: %s"
msgstr "%s (D%d) - 레이어 %d: %s"

#: gerbview/gerber_file_image.cpp:342
msgid "Image name"
msgstr "이미지 이름"

#: gerbview/gerber_file_image.cpp:347
msgid "Graphic layer"
msgstr "그래픽 레이어"

#: gerbview/gerber_file_image.cpp:351
msgid "Img Rot."
msgstr "이미지 회전."

#: gerbview/gerber_file_image.cpp:359
msgid "X Justify"
msgstr "X 정렬"

#: gerbview/gerber_file_image.cpp:362
msgid "Y Justify"
msgstr "Y 정렬"

#: gerbview/gerber_file_image.cpp:368
msgid "Image Justify Offset"
msgstr "이미지 정당화 오프셋"

#: gerbview/gerber_file_image_list.cpp:197
#, c-format
msgid "Graphic layer %d"
msgstr "그래픽 레이어 %d"

#: gerbview/gerbview_frame.cpp:67 gerbview/menubar.cpp:134
#: gerbview/menubar.cpp:140
msgid "Clear Recent Zip Files"
msgstr "최근 Zip 파일 지우기"

#: gerbview/gerbview_frame.cpp:69 gerbview/menubar.cpp:92
#: gerbview/menubar.cpp:98
msgid "Clear Recent Drill Files"
msgstr "최근에 불러온 드릴 파일 목록 삭제"

#: gerbview/gerbview_frame.cpp:71 gerbview/menubar.cpp:112
#: gerbview/menubar.cpp:119
msgid "Clear Recent Job Files"
msgstr "최근 작업 파일 지우기"

#: gerbview/gerbview_frame.cpp:88
#: resources/linux/launchers/org.kicad.gerbview.desktop.in:11
msgid "KiCad Gerber Viewer"
msgstr "KiCad 거버 뷰어"

#: gerbview/gerbview_frame.cpp:679
msgid "Drawing layer not in use"
msgstr "사용하지 않는 도면층"

#: gerbview/gerbview_frame.cpp:696
msgid "(with X2 attributes)"
msgstr "(X2 속성)"

#: gerbview/gerbview_frame.cpp:705
#, c-format
msgid "Image name: \"%s\"  Layer name: \"%s\""
msgstr "이미지 이름: \"%s\"  레이어 이름: \"%s\""

#: gerbview/gerbview_frame.cpp:721
msgid "X2 attr"
msgstr "X2 속성"

#: gerbview/job_file_reader.cpp:156
msgid "This job file uses an outdated format. Please recreate it."
msgstr "이 작업 파일은 오래된 형식을 사용합니다. 재작성해 주세요."

#: gerbview/job_file_reader.cpp:192
msgid "Open Gerber Job File"
msgstr "거버 작업 파일 열기"

#: gerbview/menubar.cpp:68 gerbview/menubar.cpp:75
msgid "Clear Recent Gerber Files"
msgstr "최근 거버 파일 지우기"

#: gerbview/menubar.cpp:74 gerbview/menubar.cpp:97
msgid "Open Recent Gerber File"
msgstr "최근 거버 파일 열기"

#: gerbview/menubar.cpp:88
msgid "Open Recent Drill File"
msgstr "최근 드릴 파일 열기"

#: gerbview/menubar.cpp:118
msgid "Open Recent Job File"
msgstr "최근 작업 파일 열기"

#: gerbview/menubar.cpp:139
msgid "Open Recent Zip File"
msgstr "최근 압축 파일 열기"

#: gerbview/menubar.cpp:184
msgid "&Units"
msgstr "단위 (&U)"

#: gerbview/readgerb.cpp:65
#, c-format
msgid "File '%s' not found"
msgstr "파일 '%s'을(를) 찾을 수 없습니다"

#: gerbview/readgerb.cpp:90
msgid ""
"Warning: this file has no D-Code definition\n"
"Therefore the size of some items is undefined"
msgstr ""
"경고: 이 파일은 D-Code 정의를 가지고 있지 않습니다\n"
"따라서, 일부 개체의 크기가 정의되지 않습니다"

#: gerbview/readgerb.cpp:93
msgid ""
"Warning: this file has some missing D-Code definitions\n"
"Therefore the size of some items is undefined"
msgstr ""
"경고: 이 파일의 일부 D-Code가 정의되어 있지 않습니다\n"
"따라서, 일부 개체의 크기가 정의되지 않습니다"

#: gerbview/rs274d.cpp:413
msgid "Invalid Code Number"
msgstr "잘못된 코드 번호"

#: gerbview/rs274d.cpp:620
msgid "Invalid Gerber file: missing G74 or G75 arc command"
msgstr "유효하지 않은 거버 파일: G74 또는 G75 호 명령어 존재하지 않음"

#: gerbview/rs274x.cpp:229
#, c-format
msgid "RS274X: Invalid GERBER format command '%c' at line %d: \"%s\""
msgstr "RS274X: 유효하지 않은 GERBER 형식 명령어 '%c' - 행 %d: \"%s\""

#: gerbview/rs274x.cpp:232
#, c-format
msgid "GERBER file \"%s\" may not display as intended."
msgstr "GERBER 파일 \"%s\" 이 제대로 표시되지 않을 수 있습니다."

#: gerbview/rs274x.cpp:540
msgid "RS274X: Command \"IR\" rotation value not allowed"
msgstr "RS274X: 명령어 \"IR\" 회전값은 허용되지 않습니다"

#: gerbview/rs274x.cpp:648
msgid "RS274X: Command KNOCKOUT ignored by GerbView"
msgstr "RS274X: GerbView에서 밑색빼기 명령을 무시함"

#: gerbview/toolbars_gerber.cpp:131
msgid "Highlight items belonging to this component"
msgstr "이 컴포넌트에 속한 개체 강조"

#: gerbview/toolbars_gerber.cpp:144
msgid "Highlight items belonging to this net"
msgstr "이 네트에 속한 개체 강조"

#: gerbview/toolbars_gerber.cpp:158 gerbview/toolbars_gerber.cpp:161
msgid "Attr:"
msgstr "속성:"

#: gerbview/toolbars_gerber.cpp:160
msgid "Highlight items with this aperture attribute"
msgstr "이 조리개 속성을 가진 개체 강조"

#: gerbview/toolbars_gerber.cpp:174 gerbview/toolbars_gerber.cpp:176
msgid "DCode:"
msgstr "D코드:"

#: gerbview/toolbars_gerber.cpp:292
msgid "<No selection>"
msgstr "<선택되지 않음>"

#: gerbview/tools/gerbview_actions.cpp:41
msgid "Open Autodetected File(s)..."
msgstr "자동 감지된 파일 열기..."

#: gerbview/tools/gerbview_actions.cpp:42
msgid "Open Autodetected file(s) on a new layer."
msgstr "새 레이어에서 자동 감지된 파일을 엽니다."

#: gerbview/tools/gerbview_actions.cpp:48
msgid "Open Gerber Plot File(s)..."
msgstr "거버 플롯 파일 열기..."

#: gerbview/tools/gerbview_actions.cpp:49
msgid "Open Gerber plot file(s) on a new layer."
msgstr "새 레이어에서 거버 플롯 파일(들)을 엽니다."

#: gerbview/tools/gerbview_actions.cpp:55
msgid "Open Excellon Drill File(s)..."
msgstr "Excellon 드릴 파일 열기..."

#: gerbview/tools/gerbview_actions.cpp:56
msgid "Open Excellon drill file(s) on a new layer."
msgstr "새 레이어에서 Excellon 드릴 파일을 엽니다."

#: gerbview/tools/gerbview_actions.cpp:62
msgid "Open Gerber Job File..."
msgstr "거버 작업 파일 열기..."

#: gerbview/tools/gerbview_actions.cpp:63
msgid "Open a Gerber job file and its associated gerber plot files"
msgstr "거버 작업 파일과, 연관된 거버 플롯 파일을 엽니다"

#: gerbview/tools/gerbview_actions.cpp:69
msgid "Open Zip Archive File..."
msgstr "Zip 보관 파일 열기..."

#: gerbview/tools/gerbview_actions.cpp:70
msgid "Open a zipped archive (Gerber and Drill) file"
msgstr "압축된 보관 (거버와 드릴) 파일 열기"

#: gerbview/tools/gerbview_actions.cpp:76
msgid "Show Layers Manager"
msgstr "레이어 관리자 표시"

#: gerbview/tools/gerbview_actions.cpp:77
msgid "Show or hide the layer manager"
msgstr "레이어 관리자 표시 또는 숨김"

#: gerbview/tools/gerbview_actions.cpp:83
msgid "List DCodes..."
msgstr "디코드 목록..."

#: gerbview/tools/gerbview_actions.cpp:84
msgid "List D-codes defined in Gerber files"
msgstr "거버 파일에 정의된 D-code 목록"

#: gerbview/tools/gerbview_actions.cpp:90
msgid "Show Source..."
msgstr "소스 표시..."

#: gerbview/tools/gerbview_actions.cpp:91
msgid "Show source file for the current layer"
msgstr "현재 레이어의 소스 파일 표시"

#: gerbview/tools/gerbview_actions.cpp:97
msgid "Export to PCB Editor..."
msgstr "PCB 편집기로 내보내기..."

#: gerbview/tools/gerbview_actions.cpp:98
msgid "Export data as a KiCad PCB file"
msgstr "KiCad PCB 파일로 데이터 내보내기"

#: gerbview/tools/gerbview_actions.cpp:104
#: gerbview/widgets/gerbview_layer_widget.cpp:195
msgid "Clear Current Layer..."
msgstr "현재 레이어 지우기..."

#: gerbview/tools/gerbview_actions.cpp:105
msgid "Clear the selected graphic layer"
msgstr "선택한 그래픽 레이어 지우기"

#: gerbview/tools/gerbview_actions.cpp:111
msgid "Clear All Layers"
msgstr "모든 레이어 지우기"

#: gerbview/tools/gerbview_actions.cpp:112
msgid "Clear all layers. All data will be deleted"
msgstr "모든 레이어 지우기. 모든 데이터가 삭제됩니다"

#: gerbview/tools/gerbview_actions.cpp:118
msgid "Reload All Layers"
msgstr "모든 레이어 다시 불러오기"

#: gerbview/tools/gerbview_actions.cpp:119
msgid "Reload all layers. All data will be reloaded"
msgstr "모든 레이어를 재로드합니다. 모든 데이터가 재로드됩니다"

#: gerbview/tools/gerbview_actions.cpp:130
#: gerbview/tools/gerbview_actions.cpp:131
msgid "Clear Highlight"
msgstr "강조 지우기"

#: gerbview/tools/gerbview_actions.cpp:144
#: gerbview/tools/gerbview_actions.cpp:145
msgid "Highlight Component"
msgstr "컴포넌트 강조"

#: gerbview/tools/gerbview_actions.cpp:151
#: gerbview/tools/gerbview_actions.cpp:152
msgid "Highlight Attribute"
msgstr "속성 강조"

#: gerbview/tools/gerbview_actions.cpp:158
#: gerbview/tools/gerbview_actions.cpp:159
msgid "Highlight DCode"
msgstr "D코드 강조"

#: gerbview/tools/gerbview_actions.cpp:167
#: gerbview/tools/gerbview_actions.cpp:168
msgid "Next Layer"
msgstr "다음 레이어"

#: gerbview/tools/gerbview_actions.cpp:175
#: gerbview/tools/gerbview_actions.cpp:176
msgid "Previous Layer"
msgstr "이전 레이어"

#: gerbview/tools/gerbview_actions.cpp:182
msgid "Move Layer Up"
msgstr "레이어를 위로 이동"

#: gerbview/tools/gerbview_actions.cpp:183
msgid "Move Current Layer up"
msgstr "현재 레이어 위로 이동"

#: gerbview/tools/gerbview_actions.cpp:190
msgid "Move Layer Down"
msgstr "레이어를 아래로 이동"

#: gerbview/tools/gerbview_actions.cpp:191
#: gerbview/widgets/gerbview_layer_widget.cpp:192
msgid "Move Current Layer Down"
msgstr "현재 레이어 아래로 이동"

#: gerbview/tools/gerbview_actions.cpp:199
msgid "Sketch Lines"
msgstr "선 스케치"

#: gerbview/tools/gerbview_actions.cpp:200
msgid "Show lines in outline mode"
msgstr "외곽선 모드에서 선 표시"

#: gerbview/tools/gerbview_actions.cpp:208
msgid "Sketch Flashed Items"
msgstr "플래시 개체 스케치"

#: gerbview/tools/gerbview_actions.cpp:209
msgid "Show flashed items in outline mode"
msgstr "윤곽선 모드로 플래시 항목표시"

#: gerbview/tools/gerbview_actions.cpp:217
msgid "Sketch Polygons"
msgstr "다각형 스케치"

#: gerbview/tools/gerbview_actions.cpp:218
msgid "Show polygons in outline mode"
msgstr "외곽선 모드에서 다각형 표시"

#: gerbview/tools/gerbview_actions.cpp:225
msgid "Ghost Negative Objects"
msgstr "고스트 네거티브 객체"

#: gerbview/tools/gerbview_actions.cpp:226
msgid "Show negative objects in ghost color"
msgstr "네거티브 객체를 고스트 컬러로 표시"

#: gerbview/tools/gerbview_actions.cpp:234
msgid "Show DCodes"
msgstr "DCode 표시"

#: gerbview/tools/gerbview_actions.cpp:235
msgid "Show dcode number"
msgstr "D코드 번호 표시"

#: gerbview/tools/gerbview_actions.cpp:241
msgid "Show in Differential Mode"
msgstr "차동 모드로 표시"

#: gerbview/tools/gerbview_actions.cpp:242
msgid "Show layers in differential compare mode"
msgstr "차등 비교 모드에서 레이어 표시"

#: gerbview/tools/gerbview_actions.cpp:248
msgid "Show in XOR Mode"
msgstr "XOR 모드로 표시"

#: gerbview/tools/gerbview_actions.cpp:249
msgid "Show layers in exclusive-or compare mode"
msgstr "XOR 비교 모드에서 레이어 표시"

#: gerbview/tools/gerbview_actions.cpp:255
msgid "Flip Gerber View"
msgstr "거버 뷰 뒤집기"

#: gerbview/tools/gerbview_actions.cpp:256
msgid "Show as mirror image"
msgstr "이미지 반전시켜 표시"

#: gerbview/tools/gerbview_control.cpp:119
msgid "None of the Gerber layers contain any data"
msgstr "데이터를 가진 거버 레이어가 없습니다"

#: gerbview/tools/gerbview_control.cpp:126
msgid "Export as KiCad Board File"
msgstr "KiCad 기판 파일로 내보내기"

#: gerbview/tools/gerbview_inspection_tool.cpp:147
msgid "D Codes"
msgstr "D 코드"

#: gerbview/tools/gerbview_inspection_tool.cpp:175
#, c-format
msgid "Source file '%s' not found."
msgstr "소스 파일 '%s'을(를) 찾을 수 없습니다."

#: gerbview/tools/gerbview_inspection_tool.cpp:191
#, c-format
msgid "No file loaded on the active layer %d."
msgstr "활성화 레이어 %d에 불러온 파일이 없습니다."

#: gerbview/tools/gerbview_selection_tool.cpp:68
#, c-format
msgid "Highlight Items of Component '%s'"
msgstr "컴포넌트 '%s' 의 개체 강조"

#: gerbview/tools/gerbview_selection_tool.cpp:76
#, c-format
msgid "Highlight Items of Net '%s'"
msgstr "네트 '%s'의 개체 강조"

#: gerbview/tools/gerbview_selection_tool.cpp:86
#, c-format
msgid "Highlight Aperture Type '%s'"
msgstr "조리개 유형 '%s' 강조"

#: gerbview/tools/gerbview_selection_tool.cpp:94
#, c-format
msgid "Highlight DCode D%d"
msgstr "D코드 D%d 강조 표시"

#: gerbview/widgets/gerbview_layer_widget.cpp:78
#: gerbview/widgets/layer_widget.cpp:534
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:285
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:347
#: pcbnew/dialogs/dialog_export_svg_base.cpp:45
#: pcbnew/dialogs/panel_setup_layers.cpp:821
#: pcbnew/widgets/appearance_controls.cpp:1021
#: pcbnew/widgets/appearance_controls_base.cpp:32
msgid "Layers"
msgstr "레이어"

#: gerbview/widgets/gerbview_layer_widget.cpp:79
#: gerbview/widgets/layer_widget.cpp:556
msgid "Items"
msgstr "항목"

#: gerbview/widgets/gerbview_layer_widget.cpp:130
msgid "Show DCodes identification"
msgstr "DCode 식별 표시"

#: gerbview/widgets/gerbview_layer_widget.cpp:132
msgid "Show negative objects in this color"
msgstr "네거티브 객체를 이 색상으로 표시"

#: gerbview/widgets/gerbview_layer_widget.cpp:135
#: pcbnew/widgets/appearance_controls.cpp:350
msgid "Show the (x,y) grid dots"
msgstr "(x, y) 그리드 점을 표시"

#: gerbview/widgets/gerbview_layer_widget.cpp:137
msgid "Show drawing sheet border and title block"
msgstr "도면 시트 여백 및 제목 블록 표시"

#: gerbview/widgets/gerbview_layer_widget.cpp:139
msgid "Show drawing sheet page limits"
msgstr "드로잉 시트 페이지 제한 표시"

#: gerbview/widgets/gerbview_layer_widget.cpp:141
msgid "PCB Background"
msgstr "PCB 배경"

#: gerbview/widgets/gerbview_layer_widget.cpp:160
#: pcbnew/widgets/appearance_controls.cpp:1822
msgid "Show All Layers"
msgstr "모든 레이어 표시"

#: gerbview/widgets/gerbview_layer_widget.cpp:163
#: pcbnew/widgets/appearance_controls.cpp:1808
msgid "Hide All Layers But Active"
msgstr "활성화된 레이어를 제외하고 모두 숨기기"

#: gerbview/widgets/gerbview_layer_widget.cpp:167
msgid "Always Hide All Layers But Active"
msgstr "항상 활성화된 레이어를 제외하고 모두 숨기기"

#: gerbview/widgets/gerbview_layer_widget.cpp:170
#: pcbnew/widgets/appearance_controls.cpp:1825
msgid "Hide All Layers"
msgstr "모든 레이어 지우기"

#: gerbview/widgets/gerbview_layer_widget.cpp:175
msgid "Sort Layers if X2 Mode"
msgstr "X2 모드일 경우 레이어 정렬"

#: gerbview/widgets/gerbview_layer_widget.cpp:178
msgid "Sort Layers by File Extension"
msgstr "파일 확장자로 레이어 정렬"

#: gerbview/widgets/gerbview_layer_widget.cpp:184
msgid "Layers Display Parameters: Offset and Rotation"
msgstr "레이어 표시 매개변수: 오프셋 및 회전"

#: gerbview/widgets/gerbview_layer_widget.cpp:189
msgid "Move Current Layer Up"
msgstr "현재 레이어 위로 이동"

#: gerbview/widgets/layer_widget.cpp:129
msgid "Change Layer Color for"
msgstr "레이어 색상 변경"

#: gerbview/widgets/layer_widget.cpp:185
msgid "Change Render Color for"
msgstr "렌더링 색을 변경"

#: gerbview/widgets/layer_widget.cpp:339
#: pcbnew/widgets/appearance_controls.cpp:2147
#: pcbnew/widgets/appearance_controls.cpp:2386
msgid ""
"Left double click or middle click for color change, right click for menu"
msgstr ""
"왼쪽 더블 클릭 또는 가운데 버튼 클릭을 통해 색을 변경하고, 우클릭으로 메뉴 열"
"기"

#: gerbview/widgets/layer_widget.cpp:349
msgid "Enable this for visibility"
msgstr "표시를 위해 활성화"

#: gerbview/widgets/layer_widget.cpp:444
msgid "Left double click or middle click for color change"
msgstr "왼쪽 더블 클릭 또는 가운데 버튼 클릭을 통해 색을 변경"

#: include/dialogs/panel_color_settings.h:50
msgid "Reset all colors in this theme to the KiCad defaults"
msgstr "이 테마의 모든 색상을 KiCad 기본값으로 되돌리기"

#: include/kiway_player.h:224
msgid "This file is already open."
msgstr "이 파일은 이미 열려 있습니다."

#: include/libeval_compiler/libeval_compiler.h:342
msgid "Malformed expression"
msgstr "잘못된 식"

#: include/lockfile.h:106
msgid "Lock file already exists"
msgstr "잠금 파일이 이미 존재함"

#: include/lockfile.h:125
msgid "Failed to access lock file"
msgstr "잠금 파일에 액세스 실패"

#: include/panel_hotkeys_editor.h:57
msgid "Reset all hotkeys to the built-in KiCad defaults"
msgstr "모든 단축키를 기본 제공되는 KiCad 기본값으로 되돌리기"

#: include/stroke_params.h:74
msgid "Leave unchanged"
msgstr "변경하지 않고 그대로 두기"

#: include/widgets/resettable_panel.h:66
msgid "Reset all settings on this page to their default"
msgstr "이 페이지의 모든 설정을 기본값으로 되돌리기"

#: include/widgets/ui_common.h:44
msgid "-- mixed values --"
msgstr "-- 섞인 값 --"

#: include/widgets/wx_infobar.h:118
msgid "Hide this message."
msgstr "이 메시지를 숨깁니다."

#: include/wxstream_helper.h:49
msgid "Failed to output data"
msgstr "데이터 출력에 실패하였습니다"

#: kicad/cli/command.cpp:126
msgid "Input directory"
msgstr "입력 디렉토리"

#: kicad/cli/command.cpp:132
msgid "Input file"
msgstr "입력 파일"

#: kicad/cli/command.cpp:143
msgid "Output directory"
msgstr "출력 디렉토리"

#: kicad/cli/command.cpp:150
msgid "Output file"
msgstr "출력 파일"

#: kicad/cli/command.cpp:163
msgid ""
"Path to drawing sheet, this overrides any existing project defined sheet "
"when used"
msgstr "도면 시트의 경로를 사용하면 기존 프로젝트 정의 시트를 재정의함"

#: kicad/cli/command.cpp:177
msgid ""
"Overrides or adds project variables, can be used multiple times to declare "
"multiple variables.\n"
"Use in the format of '--define-var key=value' or '-D key=value'"
msgstr ""
"프로젝트 변수를 재정의하거나 추가하며, 여러 변수를 선언하는 데 여러 번 사용"
"할 수 있습니다.\n"
"'--define-var key=value' 또는 '-D key=value' 형식으로 사용하세요"

#: kicad/cli/command.h:32
msgid "Shows help message and exits"
msgstr "도움말 메시지 표시 및 종료"

#: kicad/cli/command_fp.h:31
msgid "Footprint and Footprint Libraries"
msgstr "풋프린트 및 풋프린트 라이브러리"

#: kicad/cli/command_fp_export.h:32 kicad/cli/command_sym_export.h:33
msgid "Export utilities (svg)"
msgstr "유틸리티 내보내기(svg)"

#: kicad/cli/command_fp_export_svg.cpp:37
msgid "Exports the footprint or entire footprint library to SVG"
msgstr "풋프린트 또는 전체 풋프린트 라이브러리를 SVG로 내보냄"

#: kicad/cli/command_fp_export_svg.cpp:45
msgid "Color theme to use (will default to footprint editor settings)"
msgstr "사용할 색상 테마(기본적으로 풋프린트 편집기 설정으로 설정됨)"

#: kicad/cli/command_fp_export_svg.cpp:50
msgid "Specific footprint to export within the library"
msgstr "라이브러리 내에서 내보낼 특정 풋프린트"

#: kicad/cli/command_fp_export_svg.cpp:75
msgid "Footprint library does not exist or is not accessible\n"
msgstr "풋프린트 라이브러리가 없거나 액세스할 수 없습니다.\n"

#: kicad/cli/command_fp_upgrade.cpp:35
msgid "Upgrades the footprint library to the current kicad version format"
msgstr "풋프린트 라이브러리를 현재 kicad 버전 형식으로 업그레이드"

#: kicad/cli/command_fp_upgrade.cpp:40
msgid "Forces the footprint library to be resaved regardless of versioning"
msgstr "버전 관리에 관계없이 풋프린트 라이브러리를 강제로 다시 저장함"

#: kicad/cli/command_fp_upgrade.cpp:55
msgid "Footprint library path does not exist or is not accessible\n"
msgstr "풋프린트 라이브러리 경로가 존재하지 않거나 액세스할 수 없음\n"

#: kicad/cli/command_pcb_drc.cpp:47
msgid "Runs the Design Rules Check (DRC) on the PCB and creates a report"
msgstr "PCB에서 DRC(설계 규칙 검사)를 실행하고 보고서를 생성함"

#: kicad/cli/command_pcb_drc.cpp:52 kicad/cli/command_sch_erc.cpp:50
msgid "Output file format, options: json, report"
msgstr "출력 파일 형식, 옵션: json, 보고서"

#: kicad/cli/command_pcb_drc.cpp:56 pcbnew/dialogs/dialog_drc_base.cpp:30
msgid "Report all errors for each track"
msgstr "각 배선별 모든 오류 보고"

#: kicad/cli/command_pcb_drc.cpp:60 pcbnew/dialogs/dialog_drc_base.cpp:41
msgid "Test for parity between PCB and schematic"
msgstr "PCB와 회로도 간 동등성 테스트"

#: kicad/cli/command_pcb_drc.cpp:65 kicad/cli/command_sch_erc.cpp:55
msgid "Report units; valid options: in, mm, mils"
msgstr "보고서 단위; 유효한 옵션: in, mm, mils"

#: kicad/cli/command_pcb_drc.cpp:69
msgid ""
"Report all DRC violations, this is equivalent to including all the other "
"severity arguments"
msgstr ""
"모든 DRC 위반을 보고하는 것은 다른 모든 심각도 인수를 포함하는 것과 동일함"

#: kicad/cli/command_pcb_drc.cpp:74
msgid ""
"Report all DRC error level violations, this can be combined with the other "
"severity arguments"
msgstr "모든 DRC 오류 수준 위반을 보고하며, 다른 심각도 인수와 결합할 수 있음"

#: kicad/cli/command_pcb_drc.cpp:79
msgid ""
"Report all DRC warning level violations, this can be combined with the other "
"severity arguments"
msgstr "모든 DRC 경고 수준 위반을 신고하면 다른 심각도 인수와 결합할 수 있음"

#: kicad/cli/command_pcb_drc.cpp:84
msgid ""
"Report all excluded DRC violations, this can be combined with the other "
"severity arguments"
msgstr "제외된 모든 DRC 위반을 보고하면 다른 심각도 인수와 결합할 수 있음"

#: kicad/cli/command_pcb_drc.cpp:89
msgid "Return a nonzero exit code if DRC violations exist"
msgstr "DRC 위반이 있는 경우 0이 아닌 종료 코드 반환"

#: kicad/cli/command_pcb_drc.cpp:146 kicad/cli/command_pcb_export_3d.cpp:208
#: kicad/cli/command_pcb_export_drill.cpp:148
#: kicad/cli/command_pcb_export_dxf.cpp:104
#: kicad/cli/command_pcb_export_pos.cpp:148 kicad/cli/command_sch_erc.cpp:133
msgid "Invalid units specified\n"
msgstr "단위가 잘못 지정됨\n"

#: kicad/cli/command_pcb_drc.cpp:161 kicad/cli/command_sch_erc.cpp:149
msgid "Invalid report format\n"
msgstr "잘못된 보고서 형식\n"

#: kicad/cli/command_pcb_export.h:33
msgid "Export utilities (Gerbers, drill, position files, etc)"
msgstr "내보내기 유틸리티(거버, 드릴, 위치 파일 등)"

#: kicad/cli/command_pcb_export_3d.cpp:66
msgid "Output file format, options: step, glb (binary glTF)"
msgstr "출력 파일 형식, 옵션: step, glb(바이너리 glTF)"

#: kicad/cli/command_pcb_export_3d.cpp:70
msgid "Overwrite output file"
msgstr "출력 파일 덮어쓰기"

#: kicad/cli/command_pcb_export_3d.cpp:76
msgid "Use Grid Origin for output origin"
msgstr "출력 원점에 그리드 원점 사용"

#: kicad/cli/command_pcb_export_3d.cpp:80
msgid "Use Drill Origin for output origin"
msgstr "출력 원점에 드릴 원점 사용"

#: kicad/cli/command_pcb_export_3d.cpp:85
msgid "Exclude 3D models for components with 'Unspecified' footprint type"
msgstr "풋프린트 유형이 '지정되지 않음'인 컴포넌트에 대한 3D 모델 제외"

#: kicad/cli/command_pcb_export_3d.cpp:91
msgid "Exclude 3D models for components with 'Do not populate' attribute"
msgstr "'부착 안 함' 속성이 있는 컴포넌트에 대한 3D 모델 제외"

#: kicad/cli/command_pcb_export_3d.cpp:95
msgid ""
"Substitute STEP or IGS models with the same name in place of VRML models"
msgstr "VRML 모델 대신 동일한 이름의 STEP 또는 IGS 모델로 대체"

#: kicad/cli/command_pcb_export_3d.cpp:100
msgid "Only generate a board with no components"
msgstr "부품 없이 보드만 생성"

#: kicad/cli/command_pcb_export_3d.cpp:104
msgid "Export tracks"
msgstr "트랙 내보내기"

#: kicad/cli/command_pcb_export_3d.cpp:109
#: pcbnew/dialogs/dialog_export_step_base.cpp:165
msgid "Export zones"
msgstr "내보내기 구역"

#: kicad/cli/command_pcb_export_3d.cpp:115
msgid "Minimum distance between points to treat them as separate ones"
msgstr "점을 별도의 점으로 취급하기 위한 점 사이의 최소 거리"

#: kicad/cli/command_pcb_export_3d.cpp:122
msgid "Do not optimize STEP file (enables writing parametric curves)"
msgstr "STEP 파일 최적화 안 함(파라미터 곡선 쓰기 활성화)"

#: kicad/cli/command_pcb_export_3d.cpp:129
msgid ""
"User-specified output origin ex. 1x1in, 1x1inch, 25.4x25.4mm (default unit "
"mm)"
msgstr "사용자 지정 출력 원점 예: 1x1in, 1x1inch, 25.4x25.4mm(기본 단위 mm)"

#: kicad/cli/command_pcb_export_3d.cpp:137
msgid "Output units; valid options: mm, m, in, tenths"
msgstr "출력 단위; 유효한 옵션: mm, m, in, 십분위수"

#: kicad/cli/command_pcb_export_3d.cpp:142
msgid ""
"Name of folder to create and store 3d models in, if not specified or empty, "
"the models will be embedded in main exported VRML file"
msgstr ""
"3D 모델을 생성하고 저장할 폴더의 이름, 지정하지 않거나 비어 있으면 내보낸 기"
"본 VRML 파일에 모델이 포함됨"

#: kicad/cli/command_pcb_export_3d.cpp:146
msgid "Used with --models-dir to output relative paths in the resulting file"
msgstr "결과 파일에 상대 경로를 출력하려면 --models-dir과 함께 사용함"

#: kicad/cli/command_pcb_export_3d.cpp:189
msgid "Invalid format specified\n"
msgstr "잘못된 형식이 지정됨\n"

#: kicad/cli/command_pcb_export_base.cpp:106
#, c-format
msgid "Invalid layer name \"%s\"\n"
msgstr "잘못된 레이어 이름 \"%s\"\n"

#: kicad/cli/command_pcb_export_base.cpp:120
msgid ""
"Comma separated list of untranslated layer names to include such as F.Cu,B.Cu"
msgstr "번역되지 않은 레이어 이름의 쉼표로 구분된 목록에 F.Cu,B.Cu이 포함됨"

#: kicad/cli/command_pcb_export_base.cpp:139
msgid "At least one layer must be specified\n"
msgstr "하나 이상의 레이어를 지정해야 함\n"

#: kicad/cli/command_pcb_export_drill.cpp:47
#: pcbnew/dialogs/dialog_gendrill_base.h:93
msgid "Generate Drill Files"
msgstr "드릴 파일 생성"

#: kicad/cli/command_pcb_export_drill.cpp:51
msgid "Valid options excellon, gerber."
msgstr "유효한 옵션 excellon, gerber."

#: kicad/cli/command_pcb_export_drill.cpp:56
msgid "Valid options are: absolute,plot"
msgstr "유효한 옵션: 절대, 플롯"

#: kicad/cli/command_pcb_export_drill.cpp:62
msgid "Valid options are: decimal,suppressleading,suppresstrailing,keep."
msgstr "유효한 옵션: 십진수, 선행 억제, 후행 억제, 유지."

#: kicad/cli/command_pcb_export_drill.cpp:67
msgid "Valid options are: route,alternate."
msgstr "유효한 옵션: 라우트, 대체입니다.."

#: kicad/cli/command_pcb_export_drill.cpp:72
msgid "Output units, valid options:in,mm"
msgstr "출력 단위, 유효한 옵션:in,mm"

#: kicad/cli/command_pcb_export_drill.cpp:76
#: pcbnew/dialogs/dialog_gendrill_base.cpp:52
msgid "Mirror Y axis"
msgstr "Y축을 기준으로 미러"

#: kicad/cli/command_pcb_export_drill.cpp:80
#: pcbnew/dialogs/dialog_gendrill_base.cpp:57
msgid "Minimal header"
msgstr "최소 헤더"

#: kicad/cli/command_pcb_export_drill.cpp:84
msgid "Generate independent files for NPTH and PTH holes"
msgstr "NPTH & PTH 홀에 대한 독립 파일 생성"

#: kicad/cli/command_pcb_export_drill.cpp:88
msgid "Generate map / summary of drill hits"
msgstr "맵 생성 / 드릴 요약"

#: kicad/cli/command_pcb_export_drill.cpp:93
msgid "Valid options: pdf,gerberx2,ps,dxf,svg"
msgstr "유효한 옵션: pdf,gerberx2,ps,dxf,svg"

#: kicad/cli/command_pcb_export_drill.cpp:97
msgid "Precision of Gerber coordinates (5 or 6)"
msgstr "거버 좌표의 정밀도(5 또는 6)"

#: kicad/cli/command_pcb_export_drill.cpp:115
msgid "Output must be a directory\n"
msgstr "출력은 디렉토리여야 합니다.\n"

#: kicad/cli/command_pcb_export_drill.cpp:132
msgid "Invalid drill format\n"
msgstr "잘못된 드릴 형식\n"

#: kicad/cli/command_pcb_export_drill.cpp:172
msgid "Invalid zeros format specified\n"
msgstr "제로 형식이 잘못 지정됨\n"

#: kicad/cli/command_pcb_export_drill.cpp:188
msgid "Invalid oval drill format specified\n"
msgstr "타원형 드릴 형식이 잘못 지정됨\n"

#: kicad/cli/command_pcb_export_drill.cpp:216
msgid "Invalid map format specified\n"
msgstr "맵 형식이 잘못 지정됨\n"

#: kicad/cli/command_pcb_export_drill.cpp:232
msgid "Invalid origin mode specified\n"
msgstr "원점 모드가 잘못 지정됨\n"

#: kicad/cli/command_pcb_export_drill.cpp:244
#: kicad/cli/command_pcb_export_gerber.cpp:120
msgid "Gerber coordinate precision should be either 5 or 6\n"
msgstr "거버 좌표 정밀도는 5 또는 6이어야 함\n"

#: kicad/cli/command_pcb_export_dxf.cpp:39
msgid "Generate a DXF from a list of layers"
msgstr "레이어 목록에서 DXF 생성하기"

#: kicad/cli/command_pcb_export_dxf.cpp:46
#: kicad/cli/command_pcb_export_gerber.cpp:44
#: kicad/cli/command_pcb_export_pdf.cpp:50
msgid "Exclude the reference designator text"
msgstr "참조 지정자 텍스트 제외"

#: kicad/cli/command_pcb_export_dxf.cpp:50
#: kicad/cli/command_pcb_export_gerber.cpp:48
#: kicad/cli/command_pcb_export_pdf.cpp:54
msgid "Exclude the value text"
msgstr "값 텍스트 제외"

#: kicad/cli/command_pcb_export_dxf.cpp:54
#: pcbnew/dialogs/dialog_plot_base.cpp:332
msgid "Plot graphic items using their contours"
msgstr "그래픽 개체의 윤곽선을 이용하여 플롯"

#: kicad/cli/command_pcb_export_dxf.cpp:58
#: kicad/cli/command_pcb_export_gerber.cpp:52
#: kicad/cli/command_pcb_export_pdf.cpp:58
msgid "Include the border and title block"
msgstr "테두리 및 제목 블록 포함"

#: kicad/cli/command_pcb_export_dxf.cpp:63
msgid "Output units, valid options: mm, in"
msgstr "출력 단위, 유효한 옵션: mm, in"

#: kicad/cli/command_pcb_export_dxf.cpp:83
#: kicad/cli/command_pcb_export_gerber.cpp:114
#: kicad/cli/command_pcb_export_ipc2581.cpp:119
#: kicad/cli/command_pcb_export_pdf.cpp:98
#: kicad/cli/command_pcb_export_pos.cpp:106
#: kicad/cli/command_pcb_export_svg.cpp:108
msgid "Board file does not exist or is not accessible\n"
msgstr "보드 파일이 존재하지 않거나 액세스할 수 없습니다.\n"

#: kicad/cli/command_pcb_export_gerber.cpp:41
msgid "Plot given layers to a single Gerber file"
msgstr "주어진 레이어를 단일 거버 파일로 플롯하기"

#: kicad/cli/command_pcb_export_gerber.cpp:56
msgid "Do not use the extended X2 format"
msgstr "확장 X2 형식을 사용하지 마십시오"

#: kicad/cli/command_pcb_export_gerber.cpp:60
msgid "Do not generate netlist attributes"
msgstr "네트리스트 속성을 생성하지 않음"

#: kicad/cli/command_pcb_export_gerber.cpp:64
#: pcbnew/dialogs/dialog_plot_base.cpp:212
msgid "Subtract soldermask from silkscreen"
msgstr "실크스크린에서 솔더 마스크 빼기"

#: kicad/cli/command_pcb_export_gerber.cpp:68
msgid "Disable aperture macros"
msgstr "조리개 매크로 비활성화"

#: kicad/cli/command_pcb_export_gerber.cpp:73
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:87
#: pcbnew/dialogs/dialog_plot_base.cpp:140
msgid "Use drill/place file origin"
msgstr "드릴/배치 파일 원점 사용"

#: kicad/cli/command_pcb_export_gerber.cpp:77
msgid "Precision of Gerber coordinates, valid options: 5 or 6"
msgstr "거버 좌표의 정밀도, 유효한 옵션: 5 또는 6"

#: kicad/cli/command_pcb_export_gerber.cpp:83
msgid "Use KiCad Gerber file extension"
msgstr "KiCad 거버 파일 확장자 사용"

#: kicad/cli/command_pcb_export_gerbers.cpp:43
msgid ""
"Plot multiple Gerbers for a PCB, including the ability to use stored board "
"plot settings"
msgstr ""
"저장된 보드 플롯 설정을 사용하는 기능을 포함하여 PCB에 대해 여러 거버를 플롯"
"함"

#: kicad/cli/command_pcb_export_gerbers.cpp:49
msgid ""
"Layers to include on each plot, comma separated list of untranslated layer "
"names to include such as F.Cu,B.Cu"
msgstr ""
"각 플롯에 포함할 레이어, 포함할 변환되지 않은 레이어 이름의 쉼표로 구분된 목"
"록(예: F.Cu,B.Cu)"

#: kicad/cli/command_pcb_export_gerbers.cpp:55
msgid "Use the Gerber plot settings already configured in the board file"
msgstr "기판 파일에 이미 구성된 거버 플롯 설정 사용"

#: kicad/cli/command_pcb_export_pdf.cpp:39
msgid "Generate PDF from a list of layers"
msgstr "레이어 목록에서 PDF 생성"

#: kicad/cli/command_pcb_export_pdf.cpp:46
#: kicad/cli/command_pcb_export_svg.cpp:49
msgid "Mirror the board (useful for trying to show bottom layers)"
msgstr "보드 미러링 (하단 레이어를 표시하는 데 유용)"

#: kicad/cli/command_pcb_export_pdf.cpp:71
msgid "Color theme to use (will default to PCB Editor settings)"
msgstr "사용할 색상 테마(PCB 편집기 설정이 기본값임)"

#: kicad/cli/command_pcb_export_pdf.cpp:75
#: kicad/cli/command_pcb_export_svg.cpp:77
msgid ""
"Set pad/via drill shape option (0 = no shape, 1 = small shape, 2 = actual "
"shape)"
msgstr ""
"패드/비아 드릴 모양 옵션 설정(0 = 모양 없음, 1 = 작은 모양, 2 = 실제 모양)"

#: kicad/cli/command_pcb_export_pos.cpp:46
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:62
msgid "Generate Position File"
msgstr "배치 파일 생성"

#: kicad/cli/command_pcb_export_pos.cpp:51
msgid "Valid options: front,back,both. Gerber format only supports \"both\"."
msgstr "유효한 옵션: 전면, 후면, 양면. Gerber 형식은 \"양면\"만 지원합니다."

#: kicad/cli/command_pcb_export_pos.cpp:55
msgid "Valid options: ascii,csv,gerber"
msgstr "유효한 옵션: ascii,csv,gerber"

#: kicad/cli/command_pcb_export_pos.cpp:61
msgid "Output units; ascii or csv format only; valid options: in,mm"
msgstr "출력 단위; ASCII 또는 CSV 형식만 해당; 유효한 옵션: in,mm"

#: kicad/cli/command_pcb_export_pos.cpp:65
msgid ""
"Use negative X coordinates for footprints on bottom layer (ascii or csv "
"formats only)"
msgstr ""
"맨 아래 레이어의 풋프린트에 음수 X 좌표 사용(ASCII 또는 csv 형식만 해당)"

#: kicad/cli/command_pcb_export_pos.cpp:70
msgid "Use drill/place file origin (ascii or csv only)"
msgstr "드릴/배치 파일 원점 사용(ascii 또는 csv만 해당)"

#: kicad/cli/command_pcb_export_pos.cpp:74
msgid "Include only SMD footprints (ascii or csv only)"
msgstr "SMD 풋프린트만 포함(ascii 또는 csv만)"

#: kicad/cli/command_pcb_export_pos.cpp:79
msgid "Exclude all footprints with through-hole pads (ascii or csv only)"
msgstr "스루홀 패드가 있는 모든 풋프린트 제외(ascii 또는 csv 만 해당)"

#: kicad/cli/command_pcb_export_pos.cpp:84
#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:81
msgid "Exclude all footprints with the Do Not Populate flag set"
msgstr "부착 안함 플래그가 설정된 모든 풋프린트 제외"

#: kicad/cli/command_pcb_export_pos.cpp:88
msgid "Include board edge layer (Gerber only)"
msgstr "기판 에지 레이어 포함(거버 전용)"

#: kicad/cli/command_pcb_export_pos.cpp:132
#: kicad/cli/command_sch_export_netlist.cpp:87 kicad/cli/command_version.cpp:71
msgid "Invalid format\n"
msgstr "잘못된 형식\n"

#: kicad/cli/command_pcb_export_pos.cpp:158
msgid "\"both\" not supported for Gerber format\n"
msgstr "거버 형식은 '양면'이 지원되지 않음\n"

#: kicad/cli/command_pcb_export_pos.cpp:174
msgid "Invalid side specified\n"
msgstr "면이 잘못 지정됨\n"

#: kicad/cli/command_pcb_export_svg.cpp:42
msgid "Generate SVG outputs of a given layer list"
msgstr "지정된 레이어 목록의 SVG 출력 생성"

#: kicad/cli/command_pcb_export_svg.cpp:54
msgid "Color theme to use (will default to PCB editor settings)"
msgstr "사용할 색상 테마(기본값은 PCB 편집기 설정)"

#: kicad/cli/command_pcb_export_svg.cpp:66
msgid ""
"Set page sizing mode (0 = page with frame and title block, 1 = current page "
"size, 2 = board area only)"
msgstr ""
"페이지 크기 설정 모드 설정(0 = 프레임 및 제목 블록이 있는 페이지, 1 = 현재 페"
"이지 크기, 2 = 보드 영역만)"

#: kicad/cli/command_pcb_export_svg.cpp:73
#: kicad/cli/command_sch_export_plot.cpp:73
msgid "No drawing sheet"
msgstr "도면 시트 없음"

#: kicad/cli/command_sch.h:31
msgid "Schematics"
msgstr "회로도"

#: kicad/cli/command_sch_erc.cpp:45
msgid ""
"Runs the Electrical Rules Check (ERC) on the schematic and creates a report"
msgstr "회로도에서 ERC(전기 규칙 검사)를 실행하고 보고서를 생성함"

#: kicad/cli/command_sch_erc.cpp:58
msgid ""
"Report all ERC violations, this is equivalent to including all the other "
"severity arguments"
msgstr ""
"모든 ERC 위반을 보고, 이것은 다른 모든 심각도 인수를 포함하는 것과 동일함"

#: kicad/cli/command_sch_erc.cpp:63
msgid ""
"Report all ERC error level violations, this can be combined with the other "
"severity arguments"
msgstr "모든 DRC 오류 수준 위반을 보고하며, 다른 심각도 인수와 결합할 수 있음"

#: kicad/cli/command_sch_erc.cpp:68
msgid ""
"Report all ERC warning level violations, this can be combined with the other "
"severity arguments"
msgstr ""
"모든 ERC 경고 수준 위반을 보고, 이것은 다른 심각도 인수와 결합될 수 있음"

#: kicad/cli/command_sch_erc.cpp:74
msgid ""
"Report all excluded ERC violations, this can be combined with the other "
"severity arguments"
msgstr "제외된 모든 ERC 위반을 보고, 이것은 다른 심각도 인수와 결합될 수 있음"

#: kicad/cli/command_sch_erc.cpp:79
msgid "Return a nonzero exit code if ERC violations exist"
msgstr "ERC 위반이 있는 경우 0이 아닌 종료 코드 반환"

#: kicad/cli/command_sch_export.h:33
msgid "Export utilities (netlist, pdf, bom, etc)"
msgstr "내보내기 유틸리티(네트리스트, PDF, BOM 등)"

#: kicad/cli/command_sch_export_bom.cpp:35
msgid "Generate a Bill of Materials (BOM)"
msgstr "부품 명세서(BOM) 생성"

#: kicad/cli/command_sch_export_bom.cpp:174
#: kicad/cli/command_sch_export_netlist.cpp:56
#: kicad/cli/command_sch_export_plot.cpp:122
#: kicad/cli/command_sch_export_pythonbom.cpp:51
msgid "Schematic file does not exist or is not accessible\n"
msgstr "회로도 파일이 없거나 액세스할 수 없습니다.\n"

#: kicad/cli/command_sch_export_netlist.cpp:35
msgid "Export a netlist"
msgstr "네트리스트 내보내기"

#: kicad/cli/command_sch_export_netlist.cpp:40
msgid ""
"Netlist output format, valid options: kicadsexpr, kicadxml, cadstar, "
"orcadpcb2, spice, spicemodel"
msgstr ""
"네트리스트 출력 형식, 유효한 옵션: kicadsexpr, kicadxml, cadstar, orcadpcb2, "
"spice, spicemodel"

#: kicad/cli/command_sch_export_plot.cpp:64
msgid "Color theme to use (will default to schematic settings)"
msgstr "사용할 색상 테마(기본값은 회로도 설정임)"

#: kicad/cli/command_sch_export_plot.cpp:80
msgid "Do not generate property popups in PDF"
msgstr "PDF에서 속성 팝업 생성 안 함"

#: kicad/cli/command_sch_export_plot.cpp:89
msgid "Avoid setting a background color (regardless of theme)"
msgstr "배경색 설정 금지(테마 상관없음)"

#: kicad/cli/command_sch_export_plot.cpp:95
msgid ""
"List of page numbers separated by comma to print, blank or unspecified is "
"equivalent to all pages"
msgstr ""
"인쇄할 쉼표로 구분된 페이지 번호 목록(공백 또는 미지정)은 모든 페이지와 동일"
"함"

#: kicad/cli/command_sch_export_plot.cpp:102
msgid "Pen size [mm]"
msgstr "펜 크기 [mm]"

#: kicad/cli/command_sch_export_plot.cpp:108
msgid "Origin and scale: 0 bottom left, 1 centered, 2 page fit, 3 content fit"
msgstr "원점 및 배율: 0 왼쪽 하단, 1 중앙, 2 페이지 맞춤, 3 콘텐츠 맞춤"

#: kicad/cli/command_sch_export_plot.cpp:172
msgid "HPGL origin option must be 0, 1, 2 or 3\n"
msgstr "HPGL 오리진 옵션은 0, 1, 2 또는 3이어야 함\n"

#: kicad/cli/command_sch_export_pythonbom.cpp:36
msgid ""
"Export the legacy BOM XML format used in the schematic editor with Python "
"scripts"
msgstr ""
"파이썬 스크립트를 사용하여 회로도 편집기에서 사용되는 이전 BOM XML 형식 내보"
"내기"

#: kicad/cli/command_sym.h:31
msgid "Symbol and Symbol Libraries"
msgstr "심볼 및 심볼 라이브러리"

#: kicad/cli/command_sym_export_svg.cpp:43
msgid "Exports the symbol or entire symbol library to SVG"
msgstr "심볼 또는 전체 심볼 라이브러리를 SVG로 내보내기"

#: kicad/cli/command_sym_export_svg.cpp:48
msgid "Color theme to use (will default to symbol editor settings)"
msgstr "사용할 색상 테마(기본값은 심볼 편집기 설정)"

#: kicad/cli/command_sym_export_svg.cpp:54
msgid "Specific symbol to export within the library"
msgstr "라이브러리에서 내보낼 특정 심볼"

#: kicad/cli/command_sym_export_svg.cpp:62
msgid "Include hidden pins"
msgstr "숨은 핀 포함"

#: kicad/cli/command_sym_export_svg.cpp:66
msgid "Include hidden fields"
msgstr "숨은 필드 포함"

#: kicad/cli/command_sym_export_svg.cpp:84
msgid "Symbol file does not exist or is not accessible\n"
msgstr "심볼 파일이 없거나 액세스할 수 없습니다.\n"

#: kicad/cli/command_sym_upgrade.cpp:39
msgid "Upgrades the symbol library to the current kicad version format"
msgstr "심볼 라이브러리를 현재 kicad 버전 형식으로 업그레이드"

#: kicad/cli/command_sym_upgrade.cpp:44
msgid "Forces the symbol library to be resaved regardless of versioning"
msgstr "버전 관리에 관계없이 심볼 라이브러리를 강제로 다시 저장함"

#: kicad/cli/command_sym_upgrade.cpp:59
msgid "Symbol library does not exist or is not accessible\n"
msgstr "심볼 라이브러리가 없거나 액세스할 수 없음\n"

#: kicad/cli/command_version.cpp:35
msgid "Reports the version info in various formats"
msgstr "다양한 형식으로 버전 정보 보고"

#: kicad/cli/command_version.cpp:39
msgid "version info format (plain, commit, about)"
msgstr "버전 정보 형식 (plain, commit, about)"

#: kicad/dialogs/dialog_template_selector.cpp:149
msgid "<h1>Template Selector</h1>"
msgstr "<h1>템플릿 선택기</h1>"

#: kicad/dialogs/dialog_template_selector.cpp:254
msgid "Select Templates Directory"
msgstr "템플릿 디렉토리 선택"

#: kicad/dialogs/dialog_template_selector_base.cpp:24
msgid "Folder:"
msgstr "폴더:"

#: kicad/dialogs/dialog_template_selector_base.cpp:126
msgid "Project Template Title"
msgstr "프로젝트 템플릿 제목"

#: kicad/dialogs/dialog_template_selector_base.h:67
msgid "Project Template Selector"
msgstr "프로젝트 템플릿 선택"

#: kicad/dialogs/dialog_update_check_prompt_base.cpp:27
msgid "Would you like to automatically check for updates on startup?"
msgstr "시작 시 업데이트를 자동으로 확인하시겠습니까?"

#: kicad/dialogs/dialog_update_check_prompt_base.cpp:31
#: resources/linux/launchers/org.kicad.kicad.desktop.in:12
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:6
msgid "KiCad"
msgstr "키캐드"

#: kicad/dialogs/dialog_update_check_prompt_base.h:45
msgid "Check for Updates"
msgstr "업데이트 확인"

#: kicad/dialogs/dialog_update_notice.cpp:38
#, c-format
msgid ""
"KiCad %s is now available (you have %s). Would you like to download it now?"
msgstr ""
"이제 KiCad %s를 사용할 수 있습니다(%s가 있음). 지금 다운로드하시겠습니까?"

#: kicad/dialogs/dialog_update_notice_base.cpp:30
msgid "A new version of KiCad is available!"
msgstr "새로운 버전의 KiCad를 사용할 수 있습니다!"

#: kicad/dialogs/dialog_update_notice_base.cpp:52
msgid "Skip this version"
msgstr "이 버전 건너뛰기"

#: kicad/dialogs/dialog_update_notice_base.cpp:60
msgid "Remind me later"
msgstr "나중에 알림"

#: kicad/dialogs/dialog_update_notice_base.cpp:66
msgid "Open Downloads Page"
msgstr "다운로드 페이지 열기"

#: kicad/dialogs/dialog_update_notice_base.h:56
msgid "Update Available"
msgstr "사용 가능한 업데이트"

#: kicad/dialogs/panel_kicad_launcher.cpp:130
msgid "Edit the project schematic"
msgstr "프로젝트 회로도 편집"

#: kicad/dialogs/panel_kicad_launcher.cpp:134
msgid "Edit global and/or project schematic symbol libraries"
msgstr "전역 프로젝트 회로도 심볼 라이브러리 편집"

#: kicad/dialogs/panel_kicad_launcher.cpp:138
msgid "Edit the project PCB design"
msgstr "프로젝트의 PCB 디자인 편집"

#: kicad/dialogs/panel_kicad_launcher.cpp:142
msgid "Edit global and/or project PCB footprint libraries"
msgstr "전역 프로젝트 PCB 풋프린트 라이브러리 편집"

#: kicad/dialogs/panel_kicad_launcher.cpp:146
msgid "Preview Gerber files"
msgstr "거버 파일 미리보기"

#: kicad/dialogs/panel_kicad_launcher.cpp:150
msgid "Convert bitmap images to schematic symbols or PCB footprints"
msgstr "비트맵 이미지를 회로도 심볼 또는 PCB 풋프린트로 변환"

#: kicad/dialogs/panel_kicad_launcher.cpp:154
msgid "Show tools for calculating resistance, current capacity, etc."
msgstr "저항과 전류 용량 등을 계산하기 위한 도구."

#: kicad/dialogs/panel_kicad_launcher.cpp:158
msgid ""
"Edit drawing sheet borders and title blocks for use in schematics and PCB "
"designs"
msgstr "회로도와 PCB 디자인에서 사용되는 시트와 제목 블록 편집"

#: kicad/dialogs/panel_kicad_launcher.cpp:164
msgid "Manage downloadable packages from KiCad and 3rd party repositories"
msgstr "KiCad와 타사 저장소에서 다운로드 가능한 패키지 관리"

#: kicad/files-io.cpp:46
msgid "KiCad project file"
msgstr "KiCad 프로젝트 파일"

#: kicad/files-io.cpp:66
msgid "Unzip Project"
msgstr "프로젝트 압축 풀기"

#: kicad/files-io.cpp:73
#, c-format
msgid ""
"\n"
"Open '%s'\n"
msgstr ""
"\n"
"열기 '%s'\n"

#: kicad/files-io.cpp:76
msgid "Target Directory"
msgstr "타겟 디렉토리"

#: kicad/files-io.cpp:82
#, c-format
msgid "Unzipping project in '%s'.\n"
msgstr "'%s'에서 프로젝트 압축을 푸는 중입니다.\n"

#: kicad/files-io.cpp:117
msgid "Archive Project Files"
msgstr "프로젝트 파일 보관"

#: kicad/import_proj.cpp:74
#, c-format
msgid ""
"Cannot copy file '%s'\n"
"to '%s'\n"
"The project cannot be imported."
msgstr ""
"파일 '%s'을(를)\n"
"'%s'(으)로 복사할 수 없습니다\n"
"프로젝트를 가져올 수 없습니다."

#: kicad/import_project.cpp:74
msgid "KiCad Project Destination"
msgstr "KiCad 프로젝트 위치"

#: kicad/import_project.cpp:104
msgid ""
"The selected directory is not empty.  We recommend you create projects in "
"their own clean directory.\n"
"\n"
"Do you want to create a new empty directory for the project?"
msgstr ""
"선택한 디렉토리가 비어있지 않습니다.  프로젝트를 빈 디렉토리에서 생성하는 것"
"을 권장합니다.\n"
"\n"
"이 프로젝트를 위한 빈 디렉토리를 생성하시겠습니까?"

#: kicad/import_project.cpp:119
msgid ""
"Error creating new directory. Please try a different path. The project "
"cannot be imported."
msgstr ""
"새로운 폴더 생성 중 오류가 발생했습니다. 다른 경로를 시도하십시오. 프로젝트"
"를 가져올 수 없습니다."

#: kicad/import_project.cpp:145
msgid "Import CADSTAR Archive Project Files"
msgstr "CADSTAR 보관 프로젝트 파일 가져오기"

#: kicad/import_project.cpp:153
msgid "Import Eagle Project Files"
msgstr "Eagle 프로젝트 파일 가져오기"

#: kicad/import_project.cpp:160
msgid "Import EasyEDA Std Backup"
msgstr "EasyEDA 표준 백업 가져오기"

#: kicad/import_project.cpp:167
msgid "Import EasyEDA Pro Project"
msgstr "EasyEDA Pro 프로젝트 가져오기"

#: kicad/kicad.cpp:320
#, c-format
msgid ""
"File '%s'\n"
"does not appear to be a valid KiCad project file."
msgstr ""
"파일 '%s'은(는)\n"
"유효한 KiCad 프로젝트 파일이 아닌 것 같습니다."

#: kicad/kicad_cli.cpp:133
msgid "Export GLB (binary GLTF)"
msgstr "GLB(바이너리 GLTF) 내보내기"

#: kicad/kicad_cli.cpp:134
msgid "Export STEP"
msgstr "STEP 내보내기"

#: kicad/kicad_cli.cpp:135
msgid "Export VRML"
msgstr "VRML 내보내기"

#: kicad/kicad_cli.cpp:149
msgid "Export DXF"
msgstr "DXF 내보내기"

#: kicad/kicad_cli.cpp:150
msgid "Export HPGL"
msgstr "HPGL 내보내기"

#: kicad/kicad_cli.cpp:151
msgid "Export PDF"
msgstr "PDF 내보내기"

#: kicad/kicad_cli.cpp:152
msgid "Export PS"
msgstr "PS 내보내기"

#: kicad/kicad_cli.cpp:153
msgid "Export SVG"
msgstr "SVG 내보내기"

#: kicad/kicad_cli.cpp:320
msgid "prints version information and exits"
msgstr "버전 정보를 출력하고 종료"

#: kicad/kicad_manager_frame.cpp:218
msgid "Project Files"
msgstr "프로젝트 파일"

#: kicad/kicad_manager_frame.cpp:222
msgid "Editors"
msgstr "편집기"

#: kicad/kicad_manager_frame.cpp:303
msgid "PCM Updates Available"
msgstr "PCM 업데이트 사용 가능"

#: kicad/kicad_manager_frame.cpp:304
#, c-format
msgid "%d package update(s) avaliable"
msgstr "%d 패키지 업데이트 가능"

#: kicad/kicad_manager_frame.cpp:759
msgid "Edit File in Text Editor"
msgstr "텍스트 편집기에서 파일 편집"

#: kicad/kicad_manager_frame.cpp:841
msgid "[no project loaded]"
msgstr "[불러온 프로젝트가 없습니다]"

#: kicad/kicad_manager_frame.cpp:884
#, c-format
msgid "Project: %s"
msgstr "프로젝트: %s"

#: kicad/kicad_manager_frame.cpp:920
msgid "Restoring session"
msgstr "세션 복원 중"

#: kicad/kicad_manager_frame.cpp:933
#, c-format
msgid "Restoring '%s'"
msgstr "'%s' 복원 중"

#: kicad/menubar.cpp:57
msgid "Clear Recent Projects"
msgstr "최근 프로젝트 지우기"

#: kicad/menubar.cpp:103
msgid "Import Non-KiCad Project..."
msgstr "KiCad 이외의 프로젝트 가져오기..."

#: kicad/menubar.cpp:106
msgid "CADSTAR Project..."
msgstr "CADSTAR 프로젝트..."

#: kicad/menubar.cpp:107
msgid "Import CADSTAR Archive Schematic and PCB (*.csa, *.cpa)"
msgstr "CADSTAR 보관 회로도와 PCB 가져오기 (*.csa, *.cpa)"

#: kicad/menubar.cpp:111
msgid "EAGLE Project..."
msgstr "Eagle 프로젝트..."

#: kicad/menubar.cpp:112
msgid "Import EAGLE CAD XML schematic and board"
msgstr "Eagle CAD XML 회로도와 기판 가져오기"

#: kicad/menubar.cpp:116
msgid "EasyEDA (JLCEDA) Std Backup..."
msgstr "EasyEDA (JLCEDA) 표준 백업..."

#: kicad/menubar.cpp:117
msgid "Import EasyEDA (JLCEDA) Standard schematic and board"
msgstr "EasyEDA(JLCEDA) 표준 회로도 및 기판 가져오기"

#: kicad/menubar.cpp:121
msgid "EasyEDA (JLCEDA) Pro Project..."
msgstr "EasyEDA (JLCEDA) Pro 프로젝트..."

#: kicad/menubar.cpp:122
msgid "Import EasyEDA (JLCEDA) Professional schematic and board"
msgstr "EasyEDA(JLCEDA) 전문가용 회로도 및 보드 가져오기"

#: kicad/menubar.cpp:128
msgid "&Archive Project..."
msgstr "프로젝트 보관 (&A)..."

#: kicad/menubar.cpp:129
msgid "Archive all needed project files into zip archive"
msgstr "필요한 모든 프로젝트 파일을 zip으로 보관"

#: kicad/menubar.cpp:133
msgid "&Unarchive Project..."
msgstr "프로젝트 압축 해제 (&U)..."

#: kicad/menubar.cpp:134 kicad/menubar.cpp:260
msgid "Unarchive project files from zip archive"
msgstr "zip 보관 프로젝트 파일 압축 해제"

#: kicad/menubar.cpp:162
msgid "Browse Project Files"
msgstr "프로젝트 파일 찾아보기"

#: kicad/menubar.cpp:163
msgid "Open project directory in file browser"
msgstr "파일 브라우저에서 프로젝트 폴더 열기"

#: kicad/menubar.cpp:196
msgid "Edit Local File..."
msgstr "로컬 파일 편집..."

#: kicad/menubar.cpp:197
msgid "Edit local file in text editor"
msgstr "텍스트 편집기에서 로컬 파일 편집"

#: kicad/menubar.cpp:253
msgid "Archive all project files"
msgstr "모든 프로젝트 파일 보관"

#: kicad/menubar.cpp:270
msgid "Reveal project folder in Finder"
msgstr "파인더에서 프로젝트 폴더 열기"

#: kicad/menubar.cpp:272
msgid "Open project directory in file explorer"
msgstr "파일 탐색기에서 프로젝트 디렉토리 열기"

#: kicad/pcm/dialogs/dialog_manage_repositories.cpp:53
msgid "Add Default Repository"
msgstr "기본 저장소 추가"

#: kicad/pcm/dialogs/dialog_manage_repositories.cpp:96
msgid "Please enter fully qualified repository url"
msgstr "권한이 있는 레포지토리 주소를 입력하세요"

#: kicad/pcm/dialogs/dialog_manage_repositories.cpp:97
#: kicad/pcm/dialogs/dialog_manage_repositories_base.cpp:59
msgid "Add repository"
msgstr "레포지토리 추가"

#: kicad/pcm/dialogs/dialog_manage_repositories_base.cpp:58
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:130
#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:131
msgid "Add Existing"
msgstr "기존의 값을 추가"

#: kicad/pcm/dialogs/dialog_manage_repositories_base.cpp:77
msgid "Remove repository"
msgstr "저장소 제거"

#: kicad/pcm/dialogs/dialog_manage_repositories_base.h:62
msgid "Manage Repositories"
msgstr "저장소 관리"

#: kicad/pcm/dialogs/dialog_pcm.cpp:50
#, c-format
msgid "Plugins (%d)"
msgstr "플러그인 (%d)"

#: kicad/pcm/dialogs/dialog_pcm.cpp:51
#, c-format
msgid "Libraries (%d)"
msgstr "라이브러리 (%d)"

#: kicad/pcm/dialogs/dialog_pcm.cpp:52
#, c-format
msgid "Color themes (%d)"
msgstr "색상 테마 (%d)"

#: kicad/pcm/dialogs/dialog_pcm.cpp:80
#, c-format
msgid "Are you sure you want to update pinned package from version %s to %s?"
msgstr "고정된 패키지를 %s 버전에서 %s로 업데이트하시겠습니까?"

#: kicad/pcm/dialogs/dialog_pcm.cpp:83
msgid "Confirm update"
msgstr "업데이트 확인"

#: kicad/pcm/dialogs/dialog_pcm.cpp:104 kicad/pcm/dialogs/panel_package.cpp:111
#: kicad/pcm/dialogs/panel_package.cpp:117
#: kicad/pcm/dialogs/panel_package_base.cpp:72
#: kicad/pcm/dialogs/panel_packages_view.cpp:717
#: kicad/pcm/dialogs/panel_packages_view_base.cpp:121
msgid "Install"
msgstr "설치"

#: kicad/pcm/dialogs/dialog_pcm.cpp:118 kicad/pcm/dialogs/panel_package.cpp:78
#: kicad/pcm/dialogs/panel_package.cpp:124
#: kicad/pcm/dialogs/panel_package.cpp:149
#: kicad/pcm/dialogs/panel_package.cpp:163
#: kicad/pcm/dialogs/panel_packages_view.cpp:718
msgid "Uninstall"
msgstr "제거"

#: kicad/pcm/dialogs/dialog_pcm.cpp:157 kicad/pcm/dialogs/dialog_pcm.cpp:388
#: kicad/pcm/dialogs/dialog_pcm_base.cpp:53
#, c-format
msgid "Repository (%d)"
msgstr "레포지토리 (%d)"

#: kicad/pcm/dialogs/dialog_pcm.cpp:165
msgid "Apply Pending Changes"
msgstr "보류 중인 변경 사항 적용"

#: kicad/pcm/dialogs/dialog_pcm.cpp:166
msgid "Discard Pending Changes"
msgstr "보류 중인 변경 사항 취소"

#: kicad/pcm/dialogs/dialog_pcm.cpp:211
msgid ""
"Are you sure you want to close the package manager and discard pending "
"changes?"
msgstr "패키지 매니저를 종료하고 대기 중인 변경 내용을 취소하시겠습니까?"

#: kicad/pcm/dialogs/dialog_pcm.cpp:292
msgid "Install Package"
msgstr "패키지 설치"

#: kicad/pcm/dialogs/dialog_pcm.cpp:405
#: kicad/pcm/dialogs/dialog_pcm_base.cpp:121
#, c-format
msgid "Pending (%d)"
msgstr "대기 중 (%d)"

#: kicad/pcm/dialogs/dialog_pcm.cpp:445
#: kicad/pcm/dialogs/dialog_pcm_base.cpp:62
#, c-format
msgid "Installed (%d)"
msgstr "설치됨 (%d)"

#: kicad/pcm/dialogs/dialog_pcm_base.cpp:37
msgid "Manage..."
msgstr "관리..."

#: kicad/pcm/dialogs/dialog_pcm_base.cpp:85
#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:112
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:110
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:131
msgid "Action"
msgstr "동작"

#: kicad/pcm/dialogs/dialog_pcm_base.cpp:86
msgid "Package"
msgstr "패키지"

#: kicad/pcm/dialogs/dialog_pcm_base.cpp:88
msgid "Repository"
msgstr "레포지토리"

#: kicad/pcm/dialogs/dialog_pcm_base.cpp:107
msgid "Discard action"
msgstr "작업 취소"

#: kicad/pcm/dialogs/dialog_pcm_base.cpp:134
msgid "Install from File..."
msgstr "파일에서 설치..."

#: kicad/pcm/dialogs/dialog_pcm_base.cpp:137
msgid "Open Package Directory"
msgstr "패키지 디렉토리 열기"

#: kicad/pcm/dialogs/dialog_pcm_base.h:76
msgid "Plugin And Content Manager"
msgstr "플러그인과 컨텐츠 매니저"

#: kicad/pcm/dialogs/dialog_pcm_progress.cpp:53
msgid "Aborting remaining tasks."
msgstr "남은 작업을 중단합니다."

#: kicad/pcm/dialogs/dialog_pcm_progress.cpp:131
#, c-format
msgid "Downloaded %lld/%lld kB"
msgstr "%lld/%lld kB 다운로드됨"

#: kicad/pcm/dialogs/dialog_pcm_progress_base.cpp:21
msgid "Download Progress"
msgstr "다운로드 진행률"

#: kicad/pcm/dialogs/dialog_pcm_progress_base.cpp:23
msgid "Waiting..."
msgstr "대기 중..."

#: kicad/pcm/dialogs/dialog_pcm_progress_base.cpp:42
msgid "Overall Progress"
msgstr "전체 진행 상황"

#: kicad/pcm/dialogs/dialog_pcm_progress_base.cpp:52
msgid "Details"
msgstr "상세"

#: kicad/pcm/dialogs/dialog_pcm_progress_base.h:58
msgid "Applying Package Changes"
msgstr "패키지 변경 적용"

#: kicad/pcm/dialogs/panel_package.cpp:71
msgid "Pin package"
msgstr "핀 패키지"

#: kicad/pcm/dialogs/panel_package.cpp:72
msgid ""
"Pinned packages don't affect available update notification and will not be "
"updated with 'Update All' button."
msgstr ""
"고정된 패키지는 사용 가능한 업데이트 알림에 영향을 주지 않으며 \"모두 업데이"
"트\" 버튼으로 업데이트되지 않습니다."

#: kicad/pcm/dialogs/panel_package.cpp:134
msgid "Install Pending"
msgstr "설치 보류 중"

#: kicad/pcm/dialogs/panel_package.cpp:140
msgid "Uninstall Pending"
msgstr "제거 보류 중"

#: kicad/pcm/dialogs/panel_package.cpp:173
msgid "Update Pending"
msgstr "업데이트 보류 중"

#: kicad/pcm/dialogs/panel_packages_view.cpp:228
msgid "Metadata"
msgstr "메타데이터"

#: kicad/pcm/dialogs/panel_packages_view.cpp:230
msgid "Package identifier: "
msgstr "패키지 식별자: "

#: kicad/pcm/dialogs/panel_packages_view.cpp:231
msgid "License: "
msgstr "라이센스: "

#: kicad/pcm/dialogs/panel_packages_view.cpp:245
msgid "Tags: "
msgstr "태그: "

#: kicad/pcm/dialogs/panel_packages_view.cpp:277
msgid "Author"
msgstr "제작자"

#: kicad/pcm/dialogs/panel_packages_view.cpp:280
msgid "Maintainer"
msgstr "관리자"

#: kicad/pcm/dialogs/panel_packages_view.cpp:284
msgid "Resources"
msgstr "리소스"

#: kicad/pcm/dialogs/panel_packages_view.cpp:518
msgid "Package download url is not specified"
msgstr "패키지 다운로드 url이 입력되지 않았습니다"

#: kicad/pcm/dialogs/panel_packages_view.cpp:519
msgid "Error downloading package"
msgstr "패키지 다운로드 중 에러 발생"

#: kicad/pcm/dialogs/panel_packages_view.cpp:530
msgid "Save Package"
msgstr "패키지 저장"

#: kicad/pcm/dialogs/panel_packages_view.cpp:543
msgid "Downloading package"
msgstr "패키지 다운로드 중"

#: kicad/pcm/dialogs/panel_packages_view.cpp:561
msgid ""
"Integrity of the downloaded package could not be verified, hash does not "
"match. Are you sure you want to keep this file?"
msgstr ""
"다운로드한 패키지의 무결성을 확인할 수 없습니다, 해시가 일치하지 않습니다. "
"이 파일을 이대로 보관하시겠습니까?"

#: kicad/pcm/dialogs/panel_packages_view.cpp:563
msgid "Keep downloaded file"
msgstr "다운로드한 파일 보존"

#: kicad/pcm/dialogs/panel_packages_view.cpp:613
#: kicad/pcm/pcm_task_manager.cpp:383
msgid ""
"This package version is incompatible with your KiCad version or platform. "
"Are you sure you want to install it anyway?"
msgstr ""
"이 패키지는 현재 KiCad 버전 또는 플랫폼과 호환되지 않습니다. 그래도 설치하시"
"겠습니까?"

#: kicad/pcm/dialogs/panel_packages_view.cpp:615
#: kicad/pcm/pcm_task_manager.cpp:385
msgid "Install package"
msgstr "패키지 설치"

#: kicad/pcm/dialogs/panel_packages_view.cpp:725
msgid "Pending"
msgstr "대기 중"

#: kicad/pcm/dialogs/panel_packages_view_base.cpp:38
msgid "Update All"
msgstr "모두 업데이트"

#: kicad/pcm/dialogs/panel_packages_view_base.cpp:91
msgid "Download Size"
msgstr "다운로드 크기"

#: kicad/pcm/dialogs/panel_packages_view_base.cpp:92
msgid "Install Size"
msgstr "설치 크기"

#: kicad/pcm/dialogs/panel_packages_view_base.cpp:93
msgid "Compatible"
msgstr "호환 가능"

#: kicad/pcm/dialogs/panel_packages_view_base.cpp:112
msgid "Show all versions"
msgstr "모든 버전 표시"

#: kicad/pcm/dialogs/panel_packages_view_base.cpp:118
msgid "Download"
msgstr "다운로드"

#: kicad/pcm/pcm.cpp:88
#, c-format
msgid "schema file '%s' not found"
msgstr "스키마 파일 '%s'을(를) 찾을 수 없습니다"

#: kicad/pcm/pcm.cpp:93
#, c-format
msgid "Error loading schema: %s"
msgstr "스키마를 불러오는 중에 오류가 발생하였습니다: %s"

#: kicad/pcm/pcm.cpp:120
#, c-format
msgid "Error loading installed packages list: %s"
msgstr "설치한 패키지 리스트를 불러오는 중 오류가 발생하였습니다: %s"

#: kicad/pcm/pcm.cpp:219 kicad/update_manager.cpp:110
#, c-format
msgid "Downloading %lld/%lld kB"
msgstr "%lld/%lld kB 다운로드 중"

#: kicad/pcm/pcm.cpp:246 kicad/update_manager.cpp:145
msgid "Download is too large."
msgstr "다운로드 파일이 너무 큽니다."

#: kicad/pcm/pcm.cpp:263
msgid "Fetching repository"
msgstr "레포지토리 취득"

#: kicad/pcm/pcm.cpp:268
msgid "Unable to load repository url"
msgstr "레포지토리 주소를 불러올 수 없습니다"

#: kicad/pcm/pcm.cpp:287
#, c-format
msgid "Unable to parse repository: %s"
msgstr "레포지토리를 파싱할 수 없습니다: %s"

#: kicad/pcm/pcm.cpp:288
msgid ""
"The given repository URL does not look like a valid KiCad package "
"repository. Please double check the URL."
msgstr ""
"지정된 리포지토리 URL이 유효한 KiCad 패키지 리포지토리처럼 보이지 않습니다. "
"URL을 다시 확인하십시오."

#: kicad/pcm/pcm.cpp:314
msgid "Fetching repository packages"
msgstr "레포지토리 패키지를 취득 중"

#: kicad/pcm/pcm.cpp:319
msgid "Unable to load repository packages url."
msgstr "레포지토리 패키지 주소를 불러올 수 없습니다."

#: kicad/pcm/pcm.cpp:329
msgid "Packages hash doesn't match. Repository may be corrupted."
msgstr "패키지 해시가 일치하지 않습니다. 레포지토리가 손상되었을 수 있습니다."

#: kicad/pcm/pcm.cpp:345
#, c-format
msgid ""
"Unable to parse packages metadata:\n"
"\n"
"%s"
msgstr ""
"패키지 메타데이터를 파싱할 수 없습니다:\n"
"\n"
"%s"

#: kicad/pcm/pcm.cpp:429
msgid "Failed to parse locally stored repository.json."
msgstr "로컬에 저장된 repository.json을 구문 분석하지 못함."

#: kicad/pcm/pcm.cpp:457
msgid ""
"Packages cache for current repository is corrupted, it will be redownloaded."
msgstr "현재 레포지토리에 대한 패키지가 손상되었습니다. 다시 다운로드됩니다."

#: kicad/pcm/pcm.cpp:510
msgid "Downloading resources"
msgstr "리소스 다운로드 중"

#: kicad/pcm/pcm.cpp:530
msgid ""
"Resources file hash doesn't match and will not be used. Repository may be "
"corrupted."
msgstr ""
"리소스 파일 해시가 일치하지 않아 사용되지 않습니다. 레포지토리가 손상되었을 "
"수 있습니다."

#: kicad/pcm/pcm.cpp:775
msgid "Local file"
msgstr "로컬 파일"

#: kicad/pcm/pcm.cpp:1104
msgid "PCM Update"
msgstr "PCM 업데이트"

#: kicad/pcm/pcm.cpp:1114
msgid "Preparing to fetch repositories"
msgstr "저장소 가져오기 준비하기"

#: kicad/pcm/pcm.cpp:1132
msgid "Fetching repository..."
msgstr "저장소 가져오기..."

#: kicad/pcm/pcm.cpp:1145
msgid "Reviewing packages..."
msgstr "패키지 검토하기..."

#: kicad/pcm/pcm_task_manager.cpp:74 kicad/pcm/pcm_task_manager.cpp:168
#, c-format
msgid "Version %s of package %s not found!"
msgstr "버전 %s 패키지 %s 찾을 수 없습니다!"

#: kicad/pcm/pcm_task_manager.cpp:83
msgid "Unable to create download directory!"
msgstr "다운로드 디렉토리를 생성할 수 없습니다!"

#: kicad/pcm/pcm_task_manager.cpp:132
#, c-format
msgid "Downloading package url: '%s'"
msgstr "패키지 url: '%s' 다운로드 중"

#: kicad/pcm/pcm_task_manager.cpp:146
#, c-format
msgid ""
"Failed to download url %s\n"
"%s"
msgstr ""
"URL 다운로드 실패 %s\n"
"%s"

#: kicad/pcm/pcm_task_manager.cpp:191
#, c-format
msgid ""
"Downloaded archive hash for package %s does not match repository entry. This "
"may indicate a problem with the package, if the issue persists report this "
"to repository maintainers."
msgstr ""
"패키지 %s에 대한 다운로드된 보관 해시가 저장소 항목과 일치하지 않습니다. 이"
"는 이 패키지에 문제가 있음을 나타낼 수 있으며, 문제가 지속되면 저장소 관리자"
"에게 문의하세요."

#: kicad/pcm/pcm_task_manager.cpp:206 kicad/pcm/pcm_task_manager.cpp:426
#, c-format
msgid "Removing previous version of package '%s'."
msgstr "이전 버전의 패키지 '%s'를 제거합니다."

#: kicad/pcm/pcm_task_manager.cpp:214
#, c-format
msgid "Installing package '%s'."
msgstr "패키지 '%s'를 설치 중."

#: kicad/pcm/pcm_task_manager.cpp:312
msgid "Aborting package installation."
msgstr "패키지 설치를 중단합니다."

#: kicad/pcm/pcm_task_manager.cpp:360
#, c-format
msgid ""
"Unable to parse package metadata:\n"
"\n"
"%s"
msgstr ""
"패키지 메타데이터를 파싱할 수 없습니다:\n"
"\n"
"%s"

#: kicad/pcm/pcm_task_manager.cpp:369
msgid "Archive does not contain a valid metadata.json file"
msgstr "보관문서에 유효한 metadata.json 파일이 존재하지 않습니다"

#: kicad/pcm/pcm_task_manager.cpp:378
msgid "Archive metadata must have a single version defined"
msgstr "보관문서 메타데이터는 하나의 버전이 정의되어 있어야 합니다"

#: kicad/pcm/pcm_task_manager.cpp:405
#, c-format
msgid ""
"Package with identifier %s is already installed. Would you like to update it "
"to the version from selected file?"
msgstr ""
"식별자 %s에 해당하는 패키지는 이미 설치되었습니다.선택한 파일의 버전으로 업데"
"이트 하시겠습니까?"

#: kicad/pcm/pcm_task_manager.cpp:408
msgid "Update package"
msgstr "패키지 업데이트"

#: kicad/pcm/pcm_task_manager.cpp:506
#, c-format
msgid "Removing directory %s"
msgstr "디렉토리 %s를 삭제합니다"

#: kicad/pcm/pcm_task_manager.cpp:514
#, c-format
msgid "Failed to remove directory %s"
msgstr "디렉토리 %s 삭제에 실패하였습니다"

#: kicad/pcm/pcm_task_manager.cpp:575
#, c-format
msgid "Package %s uninstalled"
msgstr "패키지 %s 제거됨"

#: kicad/pcm/pcm_task_manager.cpp:661
#, c-format
msgid "%d out of %d operations failed."
msgstr "%d 가 실패함 %d 작업 중."

#: kicad/pcm/pcm_task_manager.cpp:668
msgid "All operations completed successfully."
msgstr "모든 작업이 성공적으로 완료됨."

#: kicad/pcm/pcm_task_manager.cpp:673
#, c-format
msgid "%d out of %d operations were initialized but not successful."
msgstr "작업 %d개 중 %d개가 초기화되었지만 성공하지 못했습니다."

#: kicad/project_template.cpp:52
msgid "Could open the template path!"
msgstr "템플릿 경로를 열 수 있음!"

#: kicad/project_template.cpp:57
msgid "Couldn't open the meta information directory for this template!"
msgstr "이 템플릿에 대한 메타 정보 폴더를 열 수 없습니다!"

#: kicad/project_template.cpp:63
msgid "Couldn't find the meta HTML information file for this template!"
msgstr "이 템플릿의 메타 HTML 정보 파일을 찾을 수 없습니다!"

#: kicad/project_template.cpp:289
#, c-format
msgid "Cannot create folder '%s'."
msgstr "폴더 '%s'을(를) 만들 수 없습니다."

#: kicad/project_tree_item.cpp:132
msgid ""
"Changing file extension will change file type.\n"
"Do you want to continue ?"
msgstr ""
"확장자를 바꾸면 파일 형식이 변경됩니다.\n"
"그래도 계속 하시겠습니까?"

#: kicad/project_tree_item.cpp:134
msgid "Rename File"
msgstr "파일 이름 바꾸기"

#: kicad/project_tree_item.cpp:142
msgid "Unable to rename file ... "
msgstr "파일 이름을 바꿀 수 없습니다 ... "

#: kicad/project_tree_item.cpp:142
msgid "Permission error?"
msgstr "권한 오류?"

#: kicad/project_tree_item.cpp:161
#, c-format
msgid "Can not move '%s' to recycle bin."
msgstr "휴지통으로 '%s'을(를) 이동할 수 없습니다."

#: kicad/project_tree_item.cpp:164
#, c-format
msgid "Can not move '%s' to trash."
msgstr "'%s'을(를) 휴지통으로 이동할 수 없습니다."

#: kicad/project_tree_pane.cpp:283
msgid "Directory name:"
msgstr "디렉토리 이름:"

#: kicad/project_tree_pane.cpp:283
msgid "Create New Directory"
msgstr "새 디렉토리 만들기"

#: kicad/project_tree_pane.cpp:834
msgid "Switch to this Project"
msgstr "이 프로젝트로 전환"

#: kicad/project_tree_pane.cpp:835
msgid "Close all editors, and switch to the selected project"
msgstr "모든 편집기를 닫고 선택한 프로젝트로 전환"

#: kicad/project_tree_pane.cpp:842
msgid "New Directory..."
msgstr "새 디렉토리..."

#: kicad/project_tree_pane.cpp:843
msgid "Create a New Directory"
msgstr "새 디렉토리 만들기"

#: kicad/project_tree_pane.cpp:851 kicad/project_tree_pane.cpp:861
msgid "Reveal in Finder"
msgstr "파인더에서 열기"

#: kicad/project_tree_pane.cpp:852
msgid "Reveals the directory in a Finder window"
msgstr "파인더 창에서 디렉토리 열기"

#: kicad/project_tree_pane.cpp:854
msgid "Open Directory in File Explorer"
msgstr "파일 탐색기에서 디렉토리 열기"

#: kicad/project_tree_pane.cpp:855 pcbnew/tools/pcb_actions.cpp:995
msgid "Opens the directory in the default system file manager"
msgstr "기본 시스템 파일 매니저에서 디렉토리 열기"

#: kicad/project_tree_pane.cpp:862
msgid "Reveals the directories in a Finder window"
msgstr "파인더 창에서 디렉토리 열기"

#: kicad/project_tree_pane.cpp:864
msgid "Open Directories in File Explorer"
msgstr "파일 탐색기에서 디렉토리 열기"

#: kicad/project_tree_pane.cpp:865
msgid "Opens the directories in the default system file manager"
msgstr "기본 시스템 파일 매니저에서 디렉토리 열기"

#: kicad/project_tree_pane.cpp:876
msgid "Open the file in a Text Editor"
msgstr "텍스트 편집기에서 파일 열기"

#: kicad/project_tree_pane.cpp:878
msgid "Open files in a Text Editor"
msgstr "텍스트 편집기에서 파일 열기"

#: kicad/project_tree_pane.cpp:880
msgid "Edit in a Text Editor"
msgstr "텍스트 편집기에서 편집"

#: kicad/project_tree_pane.cpp:888
msgid "Rename File..."
msgstr "파일명 변경..."

#: kicad/project_tree_pane.cpp:889
msgid "Rename file"
msgstr "파일 이름 바꾸기"

#: kicad/project_tree_pane.cpp:893
msgid "Rename Files..."
msgstr "파일명 변경..."

#: kicad/project_tree_pane.cpp:894
msgid "Rename files"
msgstr "파일이름 바꾸기"

#: kicad/project_tree_pane.cpp:904
msgid "Delete the file and its content"
msgstr "파일 및 해당 내용 삭제"

#: kicad/project_tree_pane.cpp:906
msgid "Delete the files and their contents"
msgstr "파일 및 해당 내용 삭제"

#: kicad/project_tree_pane.cpp:921
msgid "Move to Trash"
msgstr "휴지통으로 이동"

#: kicad/project_tree_pane.cpp:933
msgid "Add Project to Version Control..."
msgstr "버전 관리에 프로젝트 추가..."

#: kicad/project_tree_pane.cpp:934
msgid "Initialize a new repository"
msgstr "새 저장소 초기화"

#: kicad/project_tree_pane.cpp:938
msgid "Commit Project..."
msgstr "프로젝트 커밋..."

#: kicad/project_tree_pane.cpp:939 kicad/project_tree_pane.cpp:953
msgid "Commit changes to the local repository"
msgstr "로컬 저장소에 변경 사항 커밋하기"

#: kicad/project_tree_pane.cpp:942
msgid "Push"
msgstr "올리기(Push)"

#: kicad/project_tree_pane.cpp:943
msgid "Push committed local changes to remote repository"
msgstr "커밋된 로컬 변경 내용을 원격 저장소로 푸시하기"

#: kicad/project_tree_pane.cpp:946
msgid "Pull"
msgstr "가져오기(Pull)"

#: kicad/project_tree_pane.cpp:947
msgid "Pull changes from remote repository into local"
msgstr "원격 저장소의 변경 내용을 로컬로 가져오기"

#: kicad/project_tree_pane.cpp:952
msgid "Commit File..."
msgstr "파일 커밋..."

#: kicad/project_tree_pane.cpp:967
msgid "Switch to branch "
msgstr "브랜치로 전환 "

#: kicad/project_tree_pane.cpp:972
msgid "Other..."
msgstr "기타..."

#: kicad/project_tree_pane.cpp:973
msgid "Switch to a different branch"
msgstr "다른 지점으로 전환"

#: kicad/project_tree_pane.cpp:976
msgid "Switch to Branch"
msgstr "브랜치로 전환"

#: kicad/project_tree_pane.cpp:980
msgid "Remove Version Control"
msgstr "버전 관리 삭제"

#: kicad/project_tree_pane.cpp:981
msgid "Delete all version control files from the project directory."
msgstr "프로젝트 디렉토리에서 모든 버전 관리 파일을 삭제합니다."

#: kicad/project_tree_pane.cpp:1039
#, c-format
msgid "Change filename: '%s'"
msgstr "파일 이름 변경: '%s'"

#: kicad/project_tree_pane.cpp:1041
msgid "Change filename"
msgstr "파일 이름 변경"

#: kicad/project_tree_pane.cpp:1378
msgid "Network path: not monitoring folder changes"
msgstr "네트워크 경로: 폴더 변경 사항을 모니터링하지 않음"

#: kicad/project_tree_pane.cpp:1384
msgid "Local path: monitoring folder changes"
msgstr "로컬 경로: 폴더 변경 사항을 모니터링"

#: kicad/project_tree_pane.cpp:1541
msgid "The selected directory is already a git project."
msgstr "선택한 디렉터리는 이미 git 프로젝트입니다."

#: kicad/project_tree_pane.cpp:1557
msgid "Failed to initialize git project."
msgstr "git 프로젝트 초기화에 실패했습니다."

#: kicad/project_tree_pane.cpp:1572
msgid "Set default remote"
msgstr "기본 원격 설정"

#: kicad/project_tree_pane.cpp:1625
msgid "Failed to set default remote."
msgstr "기본 원격 설정에 실패했습니다."

#: kicad/project_tree_pane.cpp:1642 kicad/project_tree_pane.cpp:1681
#: kicad/project_tree_pane.cpp:1703
msgid "Fetching Remote"
msgstr "원격 가져오기"

#: kicad/project_tree_pane.cpp:1710
msgid "Failed to push project"
msgstr "프로젝트 푸시 실패"

#: kicad/project_tree_pane.cpp:1772
#, c-format
msgid "Failed to lookup branch '%s': %s"
msgstr "분기 '%s' 조회에 실패함: %s"

#: kicad/project_tree_pane.cpp:1785
#, c-format
msgid "Failed to find branch head for '%s'"
msgstr "'%s'의 분기 헤드를 찾지 못함"

#: kicad/project_tree_pane.cpp:1796
#, c-format
msgid "Failed to switch to branch '%s'"
msgstr "'%s' 분기로 전환 실패"

#: kicad/project_tree_pane.cpp:1807
#, c-format
msgid "Failed to update HEAD reference for branch '%s'"
msgstr "분기 '%s'에 대한 헤드 참조를 업데이트하지 못함"

#: kicad/project_tree_pane.cpp:1826
msgid "Are you sure you want to remove git tracking from this project?"
msgstr "이 프로젝트에서 깃 추적을 제거하시겠습니까?"

#: kicad/project_tree_pane.cpp:1843
msgid "Failed to remove git directory"
msgstr "git 디렉토리를 제거하지 못함"

#: kicad/project_tree_pane.cpp:2158
msgid "Discarding commit due to empty commit message."
msgstr "커밋 메시지가 비어 있어 커밋을 취소합니다."

#: kicad/project_tree_pane.cpp:2164
msgid "Discarding commit due to empty file selection."
msgstr "빈 파일 선택으로 인해 커밋을 삭제합니다."

#: kicad/project_tree_pane.cpp:2170
#, c-format
msgid "Failed to get repository index: %s"
msgstr "저장소 인덱스를 가져오지 못함: %s"

#: kicad/project_tree_pane.cpp:2178
#, c-format
msgid "Failed to add file to index: %s"
msgstr "인덱스에 파일을 추가하지 못함: %s"

#: kicad/project_tree_pane.cpp:2186
#, c-format
msgid "Failed to write index: %s"
msgstr "인덱스 작성에 실패함: %s"

#: kicad/project_tree_pane.cpp:2193
#, c-format
msgid "Failed to write tree: %s"
msgstr "트리 작성 실패: %s"

#: kicad/project_tree_pane.cpp:2202
#, c-format
msgid "Failed to lookup tree: %s"
msgstr "트리 조회 실패: %s"

#: kicad/project_tree_pane.cpp:2210
#, c-format
msgid "Failed to get HEAD reference: %s"
msgstr "HEAD 참조를 가져오지 못함: %s"

#: kicad/project_tree_pane.cpp:2217
#, c-format
msgid "Failed to get commit: %s"
msgstr "커밋을 가져오지 못함: %s"

#: kicad/project_tree_pane.cpp:2233
#, c-format
msgid "Failed to create author signature: %s"
msgstr "작성자 서명 생성에 실패함: %s"

#: kicad/project_tree_pane.cpp:2243
#, c-format
msgid "Failed to create commit: %s"
msgstr "커밋 생성에 실패함: %s"

#: kicad/tools/kicad_manager_actions.cpp:43
msgid "New Project..."
msgstr "새 프로젝트..."

#: kicad/tools/kicad_manager_actions.cpp:44
msgid "Create new blank project"
msgstr "새 빈 프로젝트 만들기"

#: kicad/tools/kicad_manager_actions.cpp:52
msgid "New Project from Template..."
msgstr "새 프로젝트 템플릿..."

#: kicad/tools/kicad_manager_actions.cpp:53
msgid "Create new project from template"
msgstr "템플릿에서 새 프로젝트 만들기"

#: kicad/tools/kicad_manager_actions.cpp:60
msgid "Clone Project from Repository..."
msgstr "저장소에서 프로젝트 복제..."

#: kicad/tools/kicad_manager_actions.cpp:61
msgid "Clone a project from an existing repository"
msgstr "기존 저장소에서 프로젝트 복제"

#: kicad/tools/kicad_manager_actions.cpp:68
msgid "Open Demo Project..."
msgstr "데모 프로젝트 열기..."

#: kicad/tools/kicad_manager_actions.cpp:69
msgid "Open a demo project"
msgstr "데모 프로젝트를 엽니다"

#: kicad/tools/kicad_manager_actions.cpp:77
msgid "Open Project..."
msgstr "프로젝트 열기..."

#: kicad/tools/kicad_manager_actions.cpp:78
msgid "Open an existing project"
msgstr "기존 프로젝트 열기"

#: kicad/tools/kicad_manager_actions.cpp:85
msgid "Close Project"
msgstr "프로젝트 닫기"

#: kicad/tools/kicad_manager_actions.cpp:86
msgid "Close the current project"
msgstr "현재 프로젝트 닫기"

#: kicad/tools/kicad_manager_actions.cpp:105
msgid "Edit schematic"
msgstr "회로도 편집"

#: kicad/tools/kicad_manager_actions.cpp:116
msgid "Edit schematic symbols"
msgstr "회로도 심볼 편집"

#: kicad/tools/kicad_manager_actions.cpp:127
msgid "Edit PCB"
msgstr "PCB 편집"

#: kicad/tools/kicad_manager_actions.cpp:138
msgid "Edit PCB footprints"
msgstr "PCB 풋프린트 편집"

#: kicad/tools/kicad_manager_actions.cpp:149
msgid "Preview Gerber output files"
msgstr "거버 출력 파일 미리 보기"

#: kicad/tools/kicad_manager_actions.cpp:159
msgid "Convert bitmap images to schematic or PCB components"
msgstr "비트맵 이미지를 회로도 또는 PCB 부품으로 변환"

#: kicad/tools/kicad_manager_actions.cpp:167
#: pcb_calculator/pcb_calculator_frame.cpp:63
#: pcb_calculator/pcb_calculator_frame.cpp:213
#: pcb_calculator/pcb_calculator_frame.cpp:214
#: pcb_calculator/pcb_calculator_frame.cpp:241
msgid "Calculator Tools"
msgstr "계산기 도구"

#: kicad/tools/kicad_manager_actions.cpp:168
msgid "Run component calculations, track width calculations, etc."
msgstr "컴포넌트 계산, 배선 폭 계산 등을 실행합니다."

#: kicad/tools/kicad_manager_actions.cpp:178
msgid "Edit drawing sheet borders and title block"
msgstr "도면 시트 테두리와 제목 블록 편집"

#: kicad/tools/kicad_manager_actions.cpp:187
msgid "Run Plugin and Content Manager"
msgstr "플러그인과 컨텐츠 매니저 실행"

#: kicad/tools/kicad_manager_actions.cpp:193
msgid "Open Text Editor"
msgstr "텍스트 편집기 열기"

#: kicad/tools/kicad_manager_actions.cpp:194
msgid "Launch preferred text editor"
msgstr "선호하는 텍스트 편집기 열기"

#: kicad/tools/kicad_manager_control.cpp:73
msgid "Create New Project"
msgstr "새 프로젝트 생성"

#: kicad/tools/kicad_manager_control.cpp:121
msgid ""
"The selected folder is not empty.  It is recommended that you create "
"projects in their own empty folder.\n"
"\n"
"Do you want to continue?"
msgstr ""
"선택한 폴더가 비어있지 않습니다.  프로젝트를 빈 폴더에서 생성하는 것을 권장합"
"니다.\n"
"\n"
"계속하시겠습니까?"

#: kicad/tools/kicad_manager_control.cpp:152
msgid "Clone Project from Git Repository"
msgstr "Git 저장소에서 프로젝트 복제하기"

#: kicad/tools/kicad_manager_control.cpp:174
msgid "Cloning Repository"
msgstr "저장소 복제"

#: kicad/tools/kicad_manager_control.cpp:186
msgid "No project files were found in the repository."
msgstr "저장소에서 프로젝트 파일을 찾을 수 없습니다."

#: kicad/tools/kicad_manager_control.cpp:223
msgid "System Templates"
msgstr "시스템 템플릿"

#: kicad/tools/kicad_manager_control.cpp:232
msgid "User Templates"
msgstr "사용자 템플릿"

#: kicad/tools/kicad_manager_control.cpp:241
msgid "No project template was selected.  Cannot generate new project."
msgstr ""
"프로젝트 템플릿을 선택하지 않았습니다.  새로운 프로젝트를 생성할 수 없습니다."

#: kicad/tools/kicad_manager_control.cpp:249
msgid "New Project Folder"
msgstr "새로운 프로젝트 폴더"

#: kicad/tools/kicad_manager_control.cpp:298
#: kicad/tools/kicad_manager_control.cpp:667
#, c-format
msgid "Insufficient permissions to write to folder '%s'."
msgstr "폴더 '%s'에 저장할 수 있는 권한이 없습니다."

#: kicad/tools/kicad_manager_control.cpp:319
msgid "Overwriting files:"
msgstr "파일 덮어쓰기:"

#: kicad/tools/kicad_manager_control.cpp:325
msgid "Similar files already exist in the destination folder."
msgstr "목적지 폴더에 비슷한 파일이 이미 존재합니다."

#: kicad/tools/kicad_manager_control.cpp:344
msgid "A problem occurred creating new project from template."
msgstr "템플릿에서 새 프로젝트를 만드는 데 문제가 발생했습니다."

#: kicad/tools/kicad_manager_control.cpp:367
msgid "Open Existing Project"
msgstr "기존 프로젝트 열기"

#: kicad/tools/kicad_manager_control.cpp:592
#, c-format
msgid "Cannot copy folder '%s'."
msgstr "폴더 '%s'을(를) 복사할 수 없습니다."

#: kicad/tools/kicad_manager_control.cpp:638
msgid "Save Project To"
msgstr "프로젝트 저장"

#: kicad/tools/kicad_manager_control.cpp:658
#, c-format
msgid ""
"Folder '%s' could not be created.\n"
"\n"
"Please make sure you have write permissions and try again."
msgstr ""
"폴더 '%s'을(를) 생성될 수 없습니다.\n"
"\n"
"쓰기 권한을 가지고 있는지 확인 후 다시 시도하십시오."

#: kicad/tools/kicad_manager_control.cpp:669
msgid "Error!"
msgstr "오류!"

#: kicad/tools/kicad_manager_control.cpp:725
msgid "Create (or open) a project to edit a schematic."
msgstr "회로도를 편집할 프로젝트를 생성 (또는 열기) 합니다."

#: kicad/tools/kicad_manager_control.cpp:731
msgid "Create (or open) a project to edit a pcb."
msgstr "PCB를 편집할 프로젝트를 생성 (또는 열기) 합니다."

#: kicad/tools/kicad_manager_control.cpp:748
msgid "Application failed to load:\n"
msgstr "응용 프로그램 불러오기 실패:\n"

#: kicad/tools/kicad_manager_control.cpp:754
msgid "Application cannot start."
msgstr "응용 프로그램을 시작할 수 없음."

#: kicad/update_manager.cpp:164
msgid "Update Check"
msgstr "업데이트 확인"

#: kicad/update_manager.cpp:173
msgid "Requesting update info"
msgstr "업데이트 정보 요청하기"

#: kicad/update_manager.cpp:248
#, c-format
msgid "Unable to parse update response: %s"
msgstr "업데이트 응답을 구문 분석할 수 없음: %s"

#: kicad/widgets/filedlg_new_project.h:32
msgid "Create a new folder for the project"
msgstr "프로젝트에 새로운 폴더 생성"

#: libs/kiplatform/msw/environment.cpp:63
#, c-format
msgid "Error code: %d"
msgstr "오류 코드: %d"

#: pagelayout_editor/dialogs/design_inspector.cpp:226
msgid "Layout"
msgstr "레이아웃"

#: pagelayout_editor/dialogs/design_inspector.cpp:233
#, c-format
msgid "Size: %.1fx%.1fmm"
msgstr "크기: %.1fx%.1fmm"

#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:30
msgid "Y start:"
msgstr "Y 시작:"

#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:44
msgid "X start:"
msgstr "X 시작:"

#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:64
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:124
msgid "Origin"
msgstr "원본"

#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:68
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:128
#: pagelayout_editor/dialogs/properties_frame_base.cpp:275
#: pagelayout_editor/dialogs/properties_frame_base.cpp:328
msgid "Upper Right"
msgstr "오른쪽 상단"

#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:68
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:128
#: pagelayout_editor/dialogs/properties_frame_base.cpp:276
#: pagelayout_editor/dialogs/properties_frame_base.cpp:329
msgid "Upper Left"
msgstr "왼쪽 상단"

#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:68
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:128
#: pagelayout_editor/dialogs/properties_frame_base.cpp:274
#: pagelayout_editor/dialogs/properties_frame_base.cpp:277
#: pagelayout_editor/dialogs/properties_frame_base.cpp:330
msgid "Lower Right"
msgstr "오른쪽 하단"

#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:68
#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:128
#: pagelayout_editor/dialogs/properties_frame_base.cpp:278
#: pagelayout_editor/dialogs/properties_frame_base.cpp:327
#: pagelayout_editor/dialogs/properties_frame_base.cpp:331
msgid "Lower Left"
msgstr "왼쪽 하단"

#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:90
msgid "X end:"
msgstr "X 끝:"

#: pagelayout_editor/dialogs/dialog_new_dataitem_base.cpp:104
msgid "Y end:"
msgstr "Y 끝:"

#: pagelayout_editor/dialogs/dialog_new_dataitem_base.h:69
msgid "New Item"
msgstr "새 항목"

#: pagelayout_editor/dialogs/dialogs_for_printing.cpp:234
msgid "Print Drawing Sheet"
msgstr "도면 시트 인쇄"

#: pagelayout_editor/dialogs/dialogs_for_printing.cpp:239
msgid "An error occurred attempting to print the drawing sheet."
msgstr "도면 시트를 인쇄하는 동안 오류가 발생했습니다."

#: pagelayout_editor/dialogs/dialogs_for_printing.cpp:240
msgid "Printing"
msgstr "인쇄"

#: pagelayout_editor/dialogs/properties_frame.cpp:676
msgid "Predefined Keywords"
msgstr "사전 정의된 키워드"

#: pagelayout_editor/dialogs/properties_frame.cpp:679
msgid "Texts can include keywords."
msgstr "텍스트에는 키워드가 포함될 수 있습니다."

#: pagelayout_editor/dialogs/properties_frame.cpp:680
msgid "Keyword notation is ${keyword}"
msgstr "키워드 표기는 ${키워드}"

#: pagelayout_editor/dialogs/properties_frame.cpp:681
msgid "Each keyword is replaced by its value"
msgstr "각 키워드는 해당 값으로 대체됩니다"

#: pagelayout_editor/dialogs/properties_frame.cpp:682
msgid "These build-in keywords are always available:"
msgstr "다음 기본 제공 키워드는 항상 사용할 수 있습니다:"

#: pagelayout_editor/dialogs/properties_frame.cpp:686
msgid "(sheet number)"
msgstr "(시트 번호)"

#: pagelayout_editor/dialogs/properties_frame.cpp:687
msgid "(sheet count)"
msgstr "(시트 수)"

#: pagelayout_editor/dialogs/properties_frame.cpp:693
msgid "(paper size)"
msgstr "(용지 크기)"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:38
msgid "Show on all pages"
msgstr "모든 페이지에 표시"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:38
msgid "First page only"
msgstr "첫 페이지만"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:38
msgid "Subsequent pages only"
msgstr "후속 페이지만"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:161
#: pagelayout_editor/dialogs/properties_frame_base.cpp:474
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:195
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:139
msgid "Text width:"
msgstr "텍스트 너비:"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:172
#: pagelayout_editor/dialogs/properties_frame_base.cpp:488
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:214
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:155
msgid "Text height:"
msgstr "텍스트 높이:"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:183
msgid "Maximum width:"
msgstr "최대 너비:"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:185
#: pagelayout_editor/dialogs/properties_frame_base.cpp:198
msgid "Set to 0 to disable this constraint"
msgstr "값을 0으로 설정하여 제약을 비활성화"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:196
#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:266
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:500
msgid "Maximum height:"
msgstr "최대 높이:"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:226
msgid "Set to 0 to use default values"
msgstr "기본값을 사용하려면 0으로 설정하십시오"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:233
msgid "Comment:"
msgstr "주석:"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:270
#: pagelayout_editor/dialogs/properties_frame_base.cpp:323
msgid "From:"
msgstr "시작:"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:293
msgid "End Position"
msgstr "끝 위치"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:365
msgid "Rotation:"
msgstr "회전:"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:372
msgid "Bitmap DPI:"
msgstr "비트맵 DPI:"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:388
msgid "Repeat Parameters"
msgstr "매개변수 반복"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:396
msgid "Count:"
msgstr "개수:"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:406
msgid "Step text:"
msgstr "단계 텍스트:"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:411
msgid "Number of characters or digits to step text by for each repeat."
msgstr ""
"각 반복마다 텍스트 상에서 증가시킬 글자 또는 자릿수의 증가량을 지정합니다."

#: pagelayout_editor/dialogs/properties_frame_base.cpp:418
msgid "Step X:"
msgstr "X 단계:"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:423
msgid "Distance on the X axis to step for each repeat."
msgstr "각 반복에 대한 단계에 대한 X축의 거리."

#: pagelayout_editor/dialogs/properties_frame_base.cpp:431
msgid "Step Y:"
msgstr "Y 단계:"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:436
msgid "Distance to step on Y axis for each repeat."
msgstr "각 반복마다 Y축으로 증가시킬 이동 거리."

#: pagelayout_editor/dialogs/properties_frame_base.cpp:450
#: pagelayout_editor/dialogs/properties_frame_base.cpp:610
msgid "Apply"
msgstr "적용"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:459
msgid "Item Properties"
msgstr "항목 속성"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:502
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:385
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:144
msgid "Line thickness:"
msgstr "선 두께:"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:516
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:232
msgid "Text thickness:"
msgstr "텍스트 두께:"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:536
msgid "Set to Default"
msgstr "기본값으로 설정"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:543
msgid "Page Margins"
msgstr "페이지 여백"

#: pagelayout_editor/dialogs/properties_frame_base.cpp:622
#: pcbnew/dialogs/dialog_plot_base.cpp:68
#: pcbnew/dialogs/dialog_pns_settings_base.cpp:77
msgid "General Options"
msgstr "일반 설정"

#: pagelayout_editor/files.cpp:65 pagelayout_editor/files.cpp:109
msgid "The current drawing sheet has been modified. Save changes?"
msgstr "현재 도면 시트가 수정되었습니다. 변경 사항을 저장할까요?"

#: pagelayout_editor/files.cpp:81
#, c-format
msgid "File \"%s\" loaded"
msgstr "파일 \"%s\"을(를) 가져왔습니다"

#: pagelayout_editor/files.cpp:131
msgid "Append Existing Drawing Sheet"
msgstr "이미 존재하는 도면 시트 추가하기"

#: pagelayout_editor/files.cpp:142 pagelayout_editor/files.cpp:167
#, c-format
msgid "Unable to load %s file"
msgstr "%s 파일을 불러올 수 없습니다"

#: pagelayout_editor/files.cpp:149
#, c-format
msgid "File \"%s\" inserted"
msgstr "파일 \"%s\" 삽입됨"

#: pagelayout_editor/files.cpp:157
msgid "Open Drawing Sheet"
msgstr "도면 시트 열기"

#: pagelayout_editor/files.cpp:173
#, c-format
msgid "File \"%s\" saved."
msgstr "파일 '%s' 저장됨."

#: pagelayout_editor/files.cpp:182 pcbnew/router/router_tool.cpp:643
#, c-format
msgid "Unable to write '%s'."
msgstr "'%s'을(를) 쓸 수 없습니다."

#: pagelayout_editor/files.cpp:195
msgid "Save Drawing Sheet As"
msgstr "다른 이름으로 도면 시트 저장"

#: pagelayout_editor/files.cpp:244
msgid "Error reading drawing sheet"
msgstr "도면 시트를 읽어들이는 데 오류가 발생하였습니다"

#: pagelayout_editor/files.cpp:268
msgid "Layout file is read only."
msgstr "레이아웃 파일은 읽기 전용입니다."

#: pagelayout_editor/pl_editor_frame.cpp:99
msgid "KiCad Drawing Sheet Editor"
msgstr "KiCad 도면 시트 편집기"

#: pagelayout_editor/pl_editor_frame.cpp:163
msgid "coord origin: Right Bottom page corner"
msgstr "좌표 원점: 오른쪽 아래 페이지 모서리"

#: pagelayout_editor/pl_editor_frame.cpp:463
msgid "Error Init Printer info"
msgstr "프린터 정보 초기화 오류"

#: pagelayout_editor/pl_editor_frame.cpp:568
msgid "[no drawing sheet loaded]"
msgstr "[불러온 도면 시트가 없습니다]"

#: pagelayout_editor/pl_editor_frame.cpp:782
#, c-format
msgid "coord origin: %s"
msgstr "좌표 원점: %s"

#: pagelayout_editor/pl_editor_frame.cpp:923
msgid "New drawing sheet file is unsaved"
msgstr "새 도면 시트 파일이 저장되지 않았음"

#: pagelayout_editor/pl_editor_frame.cpp:927
msgid "Drawing sheet changes are unsaved"
msgstr "도면 시트의 변경점이 저장되지 않았습니다"

#: pagelayout_editor/pl_editor_frame.cpp:974
msgid "Page Width"
msgstr "페이지 폭"

#: pagelayout_editor/pl_editor_frame.cpp:975
msgid "Page Height"
msgstr "페이지 높이"

#: pagelayout_editor/toolbars_pl_editor.cpp:75
msgid "Left Top paper corner"
msgstr "용지의 왼쪽 위 모서리"

#: pagelayout_editor/toolbars_pl_editor.cpp:76
msgid "Right Bottom page corner"
msgstr "페이지의 오른쪽 아래 모서리"

#: pagelayout_editor/toolbars_pl_editor.cpp:77
msgid "Left Bottom page corner"
msgstr "페이지의 왼쪽 아래 모서리"

#: pagelayout_editor/toolbars_pl_editor.cpp:78
msgid "Right Top page corner"
msgstr "페이지의 오른쪽 위 모서리"

#: pagelayout_editor/toolbars_pl_editor.cpp:79
msgid "Left Top page corner"
msgstr "페이지의 왼쪽 위 모서리"

#: pagelayout_editor/toolbars_pl_editor.cpp:90
msgid "Origin of coordinates displayed to the status bar"
msgstr "좌표의 원점이 상태 바에 표시되었습니다"

#: pagelayout_editor/toolbars_pl_editor.cpp:105
msgid "Page 1"
msgstr "페이지 1"

#: pagelayout_editor/toolbars_pl_editor.cpp:106
msgid "Other pages"
msgstr "기타 페이지"

#: pagelayout_editor/toolbars_pl_editor.cpp:116
msgid ""
"Simulate page 1 or other pages to show how items\n"
"which are not on all page are displayed"
msgstr ""
"페이지 1 또는 다른 페이지를 시뮬레이션 함으로써 모든 페이지에 존재하지 않는\n"
"항목들이 어떻게 표시될 지 나타냅니다"

#: pagelayout_editor/tools/pl_actions.cpp:45
msgid "Add Line"
msgstr "선 추가"

#: pagelayout_editor/tools/pl_actions.cpp:46
msgid "Add a line"
msgstr "선 추가"

#: pagelayout_editor/tools/pl_actions.cpp:55
msgid "Add a rectangle"
msgstr "직사각형 추가"

#: pagelayout_editor/tools/pl_actions.cpp:72
msgid "Add Bitmap"
msgstr "비트맵 추가"

#: pagelayout_editor/tools/pl_actions.cpp:73
msgid "Add a bitmap image"
msgstr "비트맵 이미지 추가"

#: pagelayout_editor/tools/pl_actions.cpp:94
msgid "Append Existing Drawing Sheet..."
msgstr "기존 도면 시트 추가..."

#: pagelayout_editor/tools/pl_actions.cpp:95
msgid "Append an existing drawing sheet file to current file"
msgstr "이미 존재하는 도면 시트를 현재 파일에 추가"

#: pagelayout_editor/tools/pl_actions.cpp:105
msgid "Show Design Inspector"
msgstr "디자인 검사기 표시"

#: pagelayout_editor/tools/pl_actions.cpp:106
msgid "Show the list of items in the drawing sheet"
msgstr "도면 시트에 존재하는 개체 목록 표시"

#: pagelayout_editor/tools/pl_actions.cpp:112
msgid "Page Preview Settings..."
msgstr "페이지 미리보기 설정..."

#: pagelayout_editor/tools/pl_actions.cpp:113
msgid "Edit preview data for page size and title block"
msgstr "미리보기 데이터의 페이지 크기와 제목 블록을 편집"

#: pagelayout_editor/tools/pl_actions.cpp:119
msgid "Show Title Block in Preview Mode"
msgstr "미리보기 모드에서 제목 블록 표시"

#: pagelayout_editor/tools/pl_actions.cpp:120
msgid ""
"Show title block in preview mode:\n"
"text placeholders will be replaced with preview data."
msgstr ""
"미리보기 모드에서 제목 블록 표시하기:\n"
"텍스트 자리 표시자는 미리보기 데이터로 대체됩니다."

#: pagelayout_editor/tools/pl_actions.cpp:127
msgid "Show Title Block in Edit Mode"
msgstr "편집 모드에서 제목 블록 표시"

#: pagelayout_editor/tools/pl_actions.cpp:128
msgid ""
"Show title block in edit mode:\n"
"text placeholders are shown as ${keyword} tokens."
msgstr ""
"편집 모드에서 제목 블록 표시하기:\n"
"텍스트 자리 표시자는 ${keyword} 토큰으로 표시됩니다."

#: pagelayout_editor/tools/pl_edit_tool.cpp:530
msgid "Error writing objects to clipboard"
msgstr "클립보드에 객체 쓰는 중에 오류 발생"

#: pcb_calculator/attenuators/bridget_tee_formula.h:2
msgid ""
"### Bridged Tee Attenuator\n"
"___a___ is attenuation in dB<br>\n"
"___Z<sub>in</sub>___ is desired input impedance in &#x2126;<br>\n"
"___Z<sub>out</sub>___ is desired output impedance in &#x2126;<br>\n"
"___Z<sub>0</sub> = Z<sub>in</sub> = Z<sub>out</sub>___\n"
"\n"
"___L = 10<sup>a/20</sup>___<br>\n"
"___R1 = Z<sub>0</sub> &middot; (L&minus;1)___<br>\n"
"___R2 = Z<sub>0</sub> / (L&minus;1)___\n"
msgstr ""
"### 브리지 티형 감쇠기\n"
"___a___ 는 dB 단위의 감쇠이다<br>\n"
"___Z<sub>in</sub>___ &#x2126 에서 원하는 입력 임피던스;<br>\n"
"___Z<sub>out</sub>___ &#x2126 에서 원하는 출력 임피던스;<br>\n"
"___Z<sub>0</sub> = Z<sub>in</sub> = Z<sub>out</sub>___\n"
"\n"
"___L = 10<sup>a/20</up>___\n"
"___R<sub>1</sub> = Z<sub>0</sub> &middot; (L&minus;1)___<br>\n"
"___R<sub>2</sub> = Z<sub>0</sub> / (L&minus;1)___\n"

#: pcb_calculator/attenuators/pi_formula.h:2
msgid ""
"### Pi Attenuator\n"
"___a___ is attenuation in dB<br>\n"
"___Z<sub>in</sub>___ is desired input impedance in &#x2126;<br>\n"
"___Z<sub>out</sub>___ is desired output impedance in &#x2126;<br>\n"
"\n"
"___K = V<sub>I</sub>/V<sub>O</sub> = 10<sup>a/20</sup>___<br>\n"
"___L = K<sup>2</sup> = 10<sup>a/10</sup>___<br>\n"
"___A = (L+1) / (L&minus;1)___<br><br>\n"
"___R2 = (L&minus;1) / 2&middot;&radic;(Z<sub>in</sub> &middot; Z<sub>out</"
"sub> / L)___<br>\n"
"___R1 = 1 / (A/Z<sub>in</sub> &minus; 1/R2)___<br>\n"
"___R3 = 1 / (A/Z<sub>out</sub> &minus; 1/R2)___\n"
msgstr ""
"### 파이형 감쇠기\n"
"___a___ 는 dB 단위의 감쇠이다<br>\n"
"___Z<sub>in</sub>___ &#x2126 에서 원하는 입력 임피던스;<br>\n"
"___Z<sub>out</sub>___ &#x2126 에서 원하는 출력 임피던스;<br>\n"
"\n"
"___K = V<sub>I</sub>/V<sub>O</sub> = 10<sup>a/20</sup>___<br>\n"
"___L = K<sup>2</sup> = 10<sup>a/10</sup>___<br>\n"
"___A = (L+1) / (L&minus;1)___<br><br>\n"
"___R2 = (L&minus;1) / 2&middot;&radic;(Z<sub>in</sub> &middot; Z<sub>out</"
"sub> / L)___<br>\n"
"___R1 = 1 / (A/Z<sub>in</sub> &minus; 1/R2)___<br>\n"
"___R3 = 1 / (A/Z<sub>out</sub> &minus; 1/R2)___\n"

#: pcb_calculator/attenuators/splitter_formula.h:2
msgid ""
"### Split Attenuator\n"
"Attenuation is 6 dB<br>\n"
"___Z<sub>in</sub>___ is desired input impedance in &#x2126;<br>\n"
"___Z<sub>out</sub>___ is desired output impedance in &#x2126;<br>\n"
"___Z<sub>0</sub> = Z<sub>in</sub> = Z<sub>out</sub>___\n"
"\n"
"___R1 = R2 = R3 = Z<sub>0</sub>/3___\n"
msgstr ""
"### 분할 감쇠기\n"
"감쇠는 6 dB입니다<br>\n"
"___Z<sub>in</sub>___ 은 원하는 입력 임피던스 &#x2126; <br>\n"
"___Z<sub>out</sub>___ 은 원하는 출력 임피던스 &#x2126; <br>\n"
"___Z<sub>0</sub> = Z<sub>in</sub> = Z<sub>out</sub>___\n"
"\n"
"___R1 = R2 = R3 = Z<sub>0</sub>/3___\n"

#: pcb_calculator/attenuators/tee_formula.h:2
msgid ""
"### Tee Attenuator\n"
"___a___ is attenuation in dB<br>\n"
"___Z<sub>in</sub>___ is desired input impedance in &#x2126;<br>\n"
"___Z<sub>out</sub>___ is desired output impedance in &#x2126;<br>\n"
"\n"
"___K = V<sub>I</sub>/V<sub>O</sub> = 10<sup>a/20</sup>___<br>\n"
"___L = K<sup>2</sup> = 10<sup>a/10</sup>___<br>\n"
"___A = (L+1) / (L&minus;1)___<br><br>\n"
"___R2 = 2&middot;&radic;(L &middot; Z<sub>in</sub> &middot; Z<sub>out</"
"sub>) / (L&minus;1)___<br>\n"
"___R1 = Z<sub>in</sub> &middot; A &minus; R2___<br>\n"
"___R3 = Z<sub>out</sub> &middot; A &minus; R2___\n"
msgstr ""
"### 티형 감쇠기\n"
"___a___는 dB 단위의 감쇠이다<br>\n"
"___Z<sub>in</sub>___ &#x2126 에서 원하는 입력 임피던스;<br>\n"
"___Z<sub>out</sub>___ &#x2126 에서 원하는 출력 임피던스;<br>\n"
"\n"
"___K = V<sub>I</sub>/V<sub>O</sub> = 10<sup>a/20</sup>___<br>\n"
"___L = K<sup>2</sup> = 10<sup>a/10</sup>___<br>\n"
"___A = (L+1) / (L&minus;1)___<br><br>\n"
"___R2 = 2&middot;&radic;(L &middot; Z<sub>in</sub> &middot; Z<sub>out</"
"sub>) / (L&minus;1)___<br>\n"
"___R1 = Z<sub>in</sub> &middot; A &minus; R2___<br>\n"
"___R3 = Z<sub>out</sub> &middot; A &minus; R2___\n"

#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:33
msgid "Note: Values are minimal values"
msgstr "참고: 값은 최소 값입니다"

#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:57
msgid "Class 1"
msgstr "클래스 1"

#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:58
msgid "Class 2"
msgstr "클래스 2"

#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:59
msgid "Class 3"
msgstr "클래스 3"

#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:60
msgid "Class 4"
msgstr "클래스 4"

#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:61
msgid "Class 5"
msgstr "클래스 5"

#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:62
msgid "Class 6"
msgstr "클래스 6"

#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:73
msgid "Lines width"
msgstr "선 두께"

#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:74
msgid "Minimum clearance"
msgstr "최소 간격"

#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:75
msgid "Via: (diameter - drill)"
msgstr "비아: (직경 - 드릴)"

#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:76
msgid "Plated Pad: (diameter - drill)"
msgstr "도금 패드: (직경 - 드릴)"

#: pcb_calculator/calculator_panels/panel_board_class_base.cpp:77
msgid "NP Pad: (diameter - drill)"
msgstr "비도금 패드: (직경 - 드릴)"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:95
msgid "AWG0000"
msgstr "AWG0000"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:96
msgid "AWG000"
msgstr "AWG000"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:97
msgid "AWG00"
msgstr "AWG00"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:98
msgid "AWG0"
msgstr "AWG0"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:99
msgid "AWG1"
msgstr "AWG1"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:100
msgid "AWG2"
msgstr "AWG2"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:101
msgid "AWG3"
msgstr "AWG3"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:102
msgid "AWG4"
msgstr "AWG4"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:103
msgid "AWG5"
msgstr "AWG5"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:104
msgid "AWG6"
msgstr "AWG6"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:105
msgid "AWG7"
msgstr "AWG7"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:106
msgid "AWG8"
msgstr "AWG8"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:107
msgid "AWG9"
msgstr "AWG9"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:108
msgid "AWG10"
msgstr "AWG10"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:109
msgid "AWG11"
msgstr "AWG11"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:110
msgid "AWG12"
msgstr "AWG12"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:111
msgid "AWG13"
msgstr "AWG13"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:112
msgid "AWG14"
msgstr "AWG14"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:113
msgid "AWG15"
msgstr "AWG15"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:114
msgid "AWG16"
msgstr "AWG16"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:115
msgid "AWG17"
msgstr "AWG17"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:116
msgid "AWG18"
msgstr "AWG18"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:117
msgid "AWG19"
msgstr "AWG19"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:118
msgid "AWG20"
msgstr "AWG20"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:119
msgid "AWG21"
msgstr "AWG21"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:120
msgid "AWG22"
msgstr "AWG22"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:121
msgid "AWG23"
msgstr "AWG23"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:122
msgid "AWG24"
msgstr "AWG24"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:123
msgid "AWG25"
msgstr "AWG25"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:124
msgid "AWG26"
msgstr "AWG26"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:125
msgid "AWG27"
msgstr "AWG27"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:126
msgid "AWG28"
msgstr "AWG28"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:127
msgid "AWG29"
msgstr "AWG29"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:128
msgid "AWG30"
msgstr "AWG30"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:245
msgid "Electrical Resistivity in Ohm*m at 20 deg C"
msgstr "20 deg C에서 옴*m의 전기 저항"

#: pcb_calculator/calculator_panels/panel_cable_size.cpp:269
msgid "Temperature coefficient"
msgstr "온도 계수"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:26
msgid "Wire properties"
msgstr "와이어 속성"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:34
msgid "Standard Size:"
msgstr "표준 크기:"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:58
#: pcbnew/dialogs/dialog_board_statistics.cpp:107
msgid "Area:"
msgstr "면적:"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:65
msgid "mm^2"
msgstr "mm^2"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:69
msgid "Conductor resistivity:"
msgstr "도체 저항:"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:71
msgid "Specific resistance in Ohm*m at 20 deg C"
msgstr "20°C에서 옴*m의 비저항"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:83
#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:105
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:60
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:79
#: pcb_calculator/calculator_panels/panel_transline_base.cpp:100
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:136
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:158
#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:96
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:875
msgid "..."
msgstr "..."

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:89
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:75
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:142
msgid "ohm-meter"
msgstr "Ω•m"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:93
msgid "Temperature Coefficient:"
msgstr "온도 계수:"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:95
msgid "Thermal coefficient at 20 deg C"
msgstr "20℃에서의 열 계수"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:114
msgid "Linear resistance:"
msgstr "선형 저항:"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:126
#, c-format
msgid "Frequency for 100% skin depth:"
msgstr "침투깊이 100%를 위한 주파수:"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:138
msgid "Ampacity:"
msgstr "전류 용량:"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:149
msgid "Current density"
msgstr "현재 밀도"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:156
msgid "A/mm^2"
msgstr "A/mm^2"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:167
msgid "Application"
msgstr "응용 프로그램"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:175
msgid "Cable temperature:"
msgstr "케이블 온도:"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:177
msgid "Off-Load max conductor temp. Reference: 20 deg C"
msgstr "오프 로드 최대 컨덕터 온도. 참조: 20°C"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:186
#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:40
#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:55
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:49
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:176
msgid "deg C"
msgstr "℃"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:190
#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:92
msgid "Current:"
msgstr "전류:"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:201
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:152
msgid "Length:"
msgstr "길이:"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:203
msgid "Length includes the return path"
msgstr "길이에는 반환 경로가 포함됩니다"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:215
msgid "Resistance DC:"
msgstr "저항 DC:"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:217
msgid "DC Resistance of the conductor"
msgstr "컨덕터의 DC 저항"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:224
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:156
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:254
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:234
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:344
msgid "ohm"
msgstr "Ω"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:228
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:160
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:258
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:238
msgid "Voltage drop:"
msgstr "전압 강하:"

#: pcb_calculator/calculator_panels/panel_cable_size_base.cpp:240
msgid "Dissipated power:"
msgstr "소비된 전력:"

#: pcb_calculator/calculator_panels/panel_color_code_base.cpp:20
msgid "10% / 5%"
msgstr "10% / 5%"

#: pcb_calculator/calculator_panels/panel_color_code_base.cpp:20
msgid "<= 2%"
msgstr "<= 2%"

#: pcb_calculator/calculator_panels/panel_color_code_base.cpp:22
#: pcb_calculator/calculator_panels/panel_color_code_base.cpp:54
msgid "Tolerance"
msgstr "오차"

#: pcb_calculator/calculator_panels/panel_color_code_base.cpp:34
msgid "1st Band"
msgstr "첫 번째 밴드"

#: pcb_calculator/calculator_panels/panel_color_code_base.cpp:38
msgid "2nd Band"
msgstr "두 번째 밴드"

#: pcb_calculator/calculator_panels/panel_color_code_base.cpp:42
msgid "3rd Band"
msgstr "세 번째 밴드"

#: pcb_calculator/calculator_panels/panel_color_code_base.cpp:46
msgid "4th Band"
msgstr "네 번째 밴드"

#: pcb_calculator/calculator_panels/panel_color_code_base.cpp:50
msgid "Multiplier"
msgstr "곱셈 회로"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:19
msgid "IPC 2221"
msgstr "IPC 2221"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_base.cpp:21
msgid "IEC 60664"
msgstr "IEC 60664"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:24
msgid "Insulation for equipment within low-voltage supply systems"
msgstr "저전압 공급 시스템 내 장비 절연"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:31
msgid "Determine the transient impulse voltage to withstand"
msgstr "견딜 수 있는 과도 임펄스 전압 결정"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:41
msgid "Rated Voltage (RMS or DC):"
msgstr "정격 전압(RMS 또는 DC):"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:43
msgid "Voltage of the mains supply"
msgstr "주전원 전압"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:54
msgid "Overvoltage category:"
msgstr "과전압 범주:"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:56
msgid ""
"OVC I: Equipment with no direct connection to mains supply\n"
"\n"
"OVC II: Energy-consuming equipment to be supplied from the fixed "
"installation. (eg: appliances, portable tools, household loads). OVCIII "
"applies if there are reliability and avaibility requirements\n"
"\n"
"OVC III :  Equipment in fixed installations with reliability and avaibility "
"requirements. (eg: electrical switches, equipment for industrial use)\n"
"\n"
"OVC IV: Equipment at the origin of the installation (eg: electricity meters, "
"primary overcurrent protection devices)"
msgstr ""
"OVC I: 주 전원에 직접 연결되지 않는 장비\n"
"\n"
"OVC II: 고정된 설비에서 공급되는 에너지 소비 장비. (예: 가전제품, 휴대용 공"
"구, 가정용 부하). 신뢰성 및 가용성 요건이 있는 경우 OVCIII가 적용됨\n"
"\n"
"OVC III: 신뢰성 및 가용성 요건을 갖춘 고정 설비의 장비. (예: 전기 스위치, 산"
"업용 장비)\n"
"\n"
"OVC IV: 설치 원점에 있는 장비(예: 전기 계량기, 1차 과전류 보호 장치)"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:60
msgid "OVC I"
msgstr "OVC I"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:60
msgid "OVC II"
msgstr "OVC II"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:60
msgid "OVC III"
msgstr "OVC III"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:60
msgid "OVC IV"
msgstr "OVC IV"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:83
msgid "Impulse voltage:"
msgstr "임펄스 전압:"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:85
msgid ""
"Given the rated voltage and the overvoltage category, a device should "
"withstand this value without a breakdown of insulation. This impulse voltage "
"is a standard 1.2/50µs wave"
msgstr ""
"정격 전압과 과전압 범주를 고려할 때 장치는 절연 파괴 없이 이 값을 견뎌야 합니"
"다. 이 임펄스 전압은 표준 1.2/50µs 파동"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:95
#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:145
#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:160
msgid "kV"
msgstr "kV"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:109
msgid "Compute the clearance and creepage distances"
msgstr "간격 및 연면 거리 계산하기"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:119
msgid "RMS Voltage:"
msgstr "RMS 전압:"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:121
msgid "Expected RMS voltage."
msgstr "예상 RMS 전압."

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:134
msgid "Transient overvoltage:"
msgstr "과도 과전압:"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:136
msgid ""
"Transient overvoltages due to:\n"
"\n"
"- Atmospheric disturbances transmitted by the mains supply (eg: a lightning "
"strike)\n"
"- Switching loads in the main supplys\n"
"- External circuits\n"
"- Internal generation\n"
"\n"
"Events that last for a few milliseconds or less."
msgstr ""
"일시적인 과전압으로 인한\n"
"\n"
"- 주 전원 공급 장치에 의해 전달되는 대기 장애(예: 낙뢰)\n"
"- 주 전원 공급 장치의 스위칭 부하\n"
"- 외부 회로\n"
"- 내부 생성\n"
"\n"
"몇 밀리초 이하로 지속되는 이벤트."

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:149
msgid "Recurring peak voltage:"
msgstr "반복 피크 전압:"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:151
msgid ""
"- Steady-state voltage value\n"
"- Temporary overvoltage\n"
"- Recurring peak voltage\n"
"\n"
"Events of relatively long duration."
msgstr ""
"- 정상 상태 전압 값\n"
"- 일시적 과전압\n"
"- 반복되는 피크 전압\n"
"\n"
"비교적 긴 기간의 이벤트."

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:164
msgid "Type of insulation:"
msgstr "단열재 종류:"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:166
msgid ""
"Functional: insulation is necessary only for the functioning of the "
"equipment\n"
"\n"
"Basic: Insulation of hazardous-live parts.\n"
"\n"
"Reinforced: Single insulation that provides a degree of protection "
"equivalent to a double insulation. ( which is two separate basic "
"insulations, in case one of them fails  )."
msgstr ""
"기능: 단열은 장비의 기능을 위해서만 필요\n"
"\n"
"기본: 위험한 생명 부품의 단열.\n"
"\n"
"강화: 이중 절연과 동등한 수준의 보호 기능을 제공하는 단일 절연. (기본 단열재 "
"중 하나가 고장날 경우를 대비하여 두 개의 별도 기본 단열재)."

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:170
msgid "Functional"
msgstr "기능"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:170
msgid "Reinforced"
msgstr "강화됨"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:179
msgid "Pollution Degree:"
msgstr "오염도:"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:181
msgid ""
"PD1: No pollution or only dry, non-conductive pollution occurs\n"
"\n"
"PD2: Only non-conductive pollution occurs . Condensation may occur.\n"
"\n"
"PD3: Conductive pollution occurs, or non-conductive pollution occurs which "
"becomes conductive due to expected condensation.\n"
"\n"
"PD4: Continous conductivity occurs due to conductive dust, rain, ..."
msgstr ""
"PD1: 오염이 없거나 건조한 비전도성 오염만 발생함\n"
"\n"
"PD2: 비전도성 오염만 발생. 응결이 발생할 수 있음.\n"
"\n"
"PD3: 전도성 오염이 발생하거나 예상되는 응로 인해 전도성이 되는 비전도성 오염"
"이 발생함.\n"
"\n"
"PD4: 전도성 먼지, 비 등으로 인해 지속적인 전도성이 발생함 ..."

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:185
msgid "PD1"
msgstr "PD1"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:185
msgid "PD2"
msgstr "PD2"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:185
msgid "PD3"
msgstr "PD3"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:185
msgid "PD4"
msgstr "PD4"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:194
msgid "Material group:"
msgstr "재료 그룹:"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:196
msgid ""
"Materials with a high comparative tracking index (CTI) are better at "
"providing isolation.\n"
"\n"
"Material group I: 600 <= CTI\n"
"Material group II: 400 <= CTI < 600\n"
"Material group IIIa: 175 <= CTI < 400\n"
"Material group IIIb: 100 <= CTI < 175"
msgstr ""
"비교 추적 지수(CTI)가 높은 소재는 격리 기능이 더 뛰어납니다.\n"
"\n"
"재료 그룹 I: 600 <= CTI\n"
"재료 그룹 II: 400 <= CTI <600\n"
"재료 그룹 IIIa: 175 <= CTI <400\n"
"재료 그룹 IIIb: 100 <= CTI < 175"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:200
msgid "II"
msgstr "II"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:200
msgid "IIIa"
msgstr "IIIa"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:200
msgid "IIIb"
msgstr "IIIb"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:209
msgid "PCB material:"
msgstr "PCB 재료:"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:211
msgid ""
"Printed wiring material can benefit of a creepage distance reduction for RMS "
"voltages lower than 1000V"
msgstr ""
"인쇄된 배선 재료는 1000V 미만의 RMS 전압에서 옆면 거리 감소의 이점을 얻을 수 "
"있음"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:221
msgid "Max altitude:"
msgstr "최대고도:"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:223
msgid ""
"Coating and potting allows for clearance and creepage distances reduction. "
"Not supported by the calculator.\n"
"\n"
"A coating that could easily delaminate in the lifespan of the product (such "
"as a soldermask) should not be considered for a reduction."
msgstr ""
"코팅 및 포팅을 통해 공간거리 및 연면 거리를 줄일 수 있습니다. 계산기에서는 지"
"원되지 않습니다.\n"
"\n"
"제품 수명 동안 쉽게 박리될 수 있는 코팅(예: 솔더마스크)은 감소를 고려해서는 "
"안 됩니다."

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:254
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:197
msgid "Clearance:"
msgstr "클리어런스:"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:268
msgid "Creepage:"
msgstr "연면거리:"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:282
msgid "Min groove width:"
msgstr "최소 홈 너비:"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:284
msgid ""
"A groove which width is smaller has no effect on the path considered for "
"creepage"
msgstr "폭이 더 작은 홈은 연면거리로 간주되는 경로에 영향을 주지 않음"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_iec60664_base.cpp:313
msgid ""
"solid: clearance\n"
"dashed: creepage"
msgstr ""
"실선: 간격\n"
"점선: 연면거리"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:36
msgid "Voltage > 500 V:"
msgstr "전압 > 500V:"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:43
msgid "Update Values"
msgstr "값 갱신"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:51
msgid "Note: Values are minimal values (from IPC 2221)"
msgstr "참고: 값은 최소 값입니다 (IPC 2221로부터)"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:76
msgid "B1"
msgstr "B1"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:77
msgid "B2"
msgstr "B2"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:78
msgid "B3"
msgstr "B3"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:79
msgid "B4"
msgstr "B4"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:81
msgid "A6"
msgstr "A6"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:82
msgid "A7"
msgstr "A7"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:98
msgid "0 .. 15 V"
msgstr "0 .. 15 V"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:99
msgid "16 .. 30 V"
msgstr "16 .. 30V"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:100
msgid "31 .. 50 V"
msgstr "31 .. 50 V"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:101
msgid "51 .. 100 V"
msgstr "51 .. 100V"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:102
msgid "101 .. 150 V"
msgstr "101 .. 150 V"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:103
msgid "151 .. 170 V"
msgstr "151 .. 170 V"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:104
msgid "171 .. 250 V"
msgstr "171 .. 250V"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:105
msgid "251 .. 300 V"
msgstr "251 .. 300V"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:106
msgid "301 .. 500 V"
msgstr "301 .. 500 V"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:107
msgid " > 500 V"
msgstr " > 500 V"

#: pcb_calculator/calculator_panels/panel_electrical_spacing_ipc2221_base.cpp:117
msgid ""
"*  B1 - Internal Conductors\n"
"*  B2 - External Conductors, uncoated, sea level to 3050 m\n"
"*  B3 - External Conductors, uncoated, over 3050 m\n"
"*  B4 - External Conductors, with permanent polymer coating (any elevation)\n"
"*  A5 - External Conductors, with conformal coating over assembly (any "
"elevation)\n"
"*  A6 - External Component lead/termination, uncoated\n"
"*  A7 - External Component lead termination, with conformal coating (any "
"elevation)"
msgstr ""
"*  B1 - 내부 도체\n"
"*  B2 - 외부 도체, 코팅 없음, 해발 3050m까지\n"
"*  B3 - 외부 도체, 코팅 없으며, 3050m 이상\n"
"*  B4 - 외부 도체, 영구적인 폴리머 코팅 (모든 높이 가능)\n"
"*  A5 - 외부 도체, 조립 시에 등각 코팅됨 (모든 높이 가능)\n"
"*  A6 - 외부 부품 납 마감, 코팅 없음\n"
"*  A7 - 외부 부품 납 마감, 등각 코팅됨 (모든 높이 가능)"

#: pcb_calculator/calculator_panels/panel_eseries_display_base.cpp:21
msgid "E24,E48,E96"
msgstr "E24,E48,E96"

#: pcb_calculator/calculator_panels/panel_eseries_display_base.cpp:52
msgid "E1,E3,E6,E12"
msgstr "E1,E3,E6,E12"

#: pcb_calculator/calculator_panels/panel_fusing_current.cpp:231
msgid "Current calculation is underestimated due to long fusing time."
msgstr "긴 융합 시간으로 인해 현재 계산이 과소 평가되었습니다."

#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:31
msgid "Ambient temperature:"
msgstr "주변 온도:"

#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:48
msgid "Melting point:"
msgstr "녹는 점:"

#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:62
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:147
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:137
#: pcbnew/dialogs/dialog_track_via_size_base.cpp:25
msgid "Track width:"
msgstr "배선 너비:"

#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:77
msgid "Track thickness:"
msgstr "배선 두께:"

#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:106
msgid "Time to fuse:"
msgstr "퓨즈 시간:"

#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:113
msgid "s"
msgstr "s"

#: pcb_calculator/calculator_panels/panel_fusing_current_base.cpp:123
#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:168
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:221
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:99
msgid "Calculate"
msgstr "계산"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:46
msgid "Platinum"
msgstr "백금"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:47
msgid "Gold"
msgstr "금"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:48
msgid "Titanium"
msgstr "티탄"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:49
msgid "Stainless steel 18-9"
msgstr "스테인리스 18-9"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:50
msgid "Silver"
msgstr "은"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:51
msgid "Mercury"
msgstr "수은"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:52
msgid "Nickel"
msgstr "니켈"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:53
#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:850
#: pcbnew/dialogs/panel_setup_constraints_base.cpp:30
msgid "Copper"
msgstr "구리"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:54
msgid "Copper-Aluminium"
msgstr "구리-알루미늄"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:55
msgid "Brass"
msgstr "놋쇠"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:56
msgid "Bronze"
msgstr "청동"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:57
msgid "Tin"
msgstr "주석"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:58
msgid "Lead"
msgstr "납"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:59
msgid "Aluminium-Copper"
msgstr "알루미늄-구리"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:60
msgid "Cast iron"
msgstr "주철"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:61
msgid "Carbon steel"
msgstr "탄소강"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:62
msgid "Aluminium"
msgstr "알루미늄"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:63
msgid "Cadmium"
msgstr "카드뮴"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:64
msgid "Iron"
msgstr "철"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:65
msgid "Chrome"
msgstr "크롬"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:66
msgid "Zinc"
msgstr "아연"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:67
msgid "Manganese"
msgstr "망간"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion.cpp:68
msgid "Magnesium"
msgstr "마그네슘"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion_base.cpp:33
#: pcb_calculator/calculator_panels/panel_galvanic_corrosion_base.cpp:38
msgid "Copper (Cu)"
msgstr "구리 (Cu)"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion_base.cpp:64
msgid "Threshold voltage:"
msgstr "임계 전압:"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion_base.cpp:88
msgid "Material names:"
msgstr "재료 이름:"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion_base.cpp:92
msgid "Chemical symbols"
msgstr "화학 기호"

#: pcb_calculator/calculator_panels/panel_galvanic_corrosion_base.cpp:95
msgid "Names"
msgstr "이름"

#: pcb_calculator/calculator_panels/panel_r_calculator.cpp:64
#: pcb_calculator/calculator_panels/panel_r_calculator.cpp:148
msgid "Exact"
msgstr "정확히"

#: pcb_calculator/calculator_panels/panel_r_calculator.cpp:108
#, c-format
msgid "Incorrect required resistance value: %s"
msgstr "필요한 저항값이 잘못됨: %s"

#: pcb_calculator/calculator_panels/panel_r_calculator.cpp:156
msgid "Not worth using"
msgstr "사용 가치가 없음"

#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:21
msgid "Inputs"
msgstr "입력값"

#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:29
msgid "Required resistance:"
msgstr "필요한 저항값:"

#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:36
#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:47
#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:58
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:148
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:162
msgid "kOhm"
msgstr "kΩ"

#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:40
msgid "Exclude value 1:"
msgstr "제외할 값 1:"

#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:51
msgid "Exclude value 2:"
msgstr "제외할 값 2:"

#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:71
msgid "E1"
msgstr "E1"

#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:74
msgid "E3"
msgstr "E3"

#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:77
msgid "E6"
msgstr "E6"

#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:81
msgid "E12"
msgstr "E12"

#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:84
msgid "E24"
msgstr "E24"

#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:94
msgid "Solutions"
msgstr "해답"

#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:102
msgid "Simple solution:"
msgstr "간단한 해답:"

#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:111
#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:131
#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:151
msgid "Approximation:"
msgstr "근사값:"

#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:122
msgid "3R solution:"
msgstr "3R 해답:"

#: pcb_calculator/calculator_panels/panel_r_calculator_base.cpp:142
msgid "4R solution:"
msgstr "4R 해답:"

#: pcb_calculator/calculator_panels/panel_regulator.cpp:154
msgid "PCB Calculator data file"
msgstr "PCB 계산 데이터 파일"

#: pcb_calculator/calculator_panels/panel_regulator.cpp:159
msgid "Select PCB Calculator Data File"
msgstr "PCB 계산기 데이터 파일을 선택하시오"

#: pcb_calculator/calculator_panels/panel_regulator.cpp:174
msgid "Do you want to load this file and replace current regulator list?"
msgstr "파일을 불러와서 현재의 레귤레이터 목록을 대체하시겠습니까?"

#: pcb_calculator/calculator_panels/panel_regulator.cpp:191
#, c-format
msgid "Unable to read data file '%s'."
msgstr "'%s' 데이터 파일을 읽을 수 없습니다."

#: pcb_calculator/calculator_panels/panel_regulator.cpp:219
msgid "This regulator is already in list. Aborted"
msgstr "이 레귤레이터는 이미 목록에 있습니다. 동작이 중단됩니다"

#: pcb_calculator/calculator_panels/panel_regulator.cpp:251
#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:117
msgid "Remove Regulator"
msgstr "레귤레이터 삭제"

#: pcb_calculator/calculator_panels/panel_regulator.cpp:336
msgid "Vout must be greater than vref"
msgstr "Vout은 Vref보다 커야 합니다"

#: pcb_calculator/calculator_panels/panel_regulator.cpp:342
msgid "Vref set to 0 !"
msgstr "Vref가 0으로 설정되었습니다!"

#: pcb_calculator/calculator_panels/panel_regulator.cpp:348
msgid "Incorrect value for R1 R2"
msgstr "R1 R2에 대한 잘못된 값"

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:27
#: pcb_calculator/dialogs/dialog_regulator_form_base.cpp:48
msgid "Type:"
msgstr "유형:"

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:29
msgid ""
"Type of the regulator.\n"
"There are 2 types:\n"
"- regulators which have a dedicated sense pin for the voltage regulation.\n"
"- 3 terminal pins."
msgstr ""
"레귤레이터의 종류.\n"
"두 가지 종류가 있습니다:\n"
"- 전압 조정을 위한 전용 감지 핀이 있는 레귤레이터.\n"
"- 3개의 핀 단자."

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:33
#: pcb_calculator/dialogs/dialog_regulator_form_base.cpp:52
msgid "Standard Type"
msgstr "표준 형식"

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:33
#: pcb_calculator/dialogs/dialog_regulator_form_base.cpp:52
msgid "3 Terminal Type"
msgstr "3 단자 형식"

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:55
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:184
msgid "Formula"
msgstr "계산식"

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:79
msgid "Regulator"
msgstr "레귤레이터"

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:86
msgid "Regulators data file:"
msgstr "레귤레이터 데이터 파일:"

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:88
msgid "The name of the data file which stores known regulators parameters."
msgstr "알려진 레귤레이터 매개변수를 저장하는 데이터 파일의 이름입니다."

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:98
msgid "Browse"
msgstr "찾아보기"

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:107
msgid "Edit Regulator"
msgstr "레귤레이터 편집"

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:108
msgid "Edit the current selected regulator."
msgstr "현재 선택한 레귤레이터를 편집합니다."

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:112
msgid "Add Regulator"
msgstr "레귤레이터 추가"

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:113
msgid "Enter a new item to the current list of available regulators"
msgstr "현재 사용 가능한 레귤레이터의 리스트에 새로운 항목을 추가합니다"

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:118
msgid "Remove an item from the current list of available regulators"
msgstr "현재 사용 가능한 레귤레이터의 리스트에서 항목을 삭제합니다"

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:141
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:119
msgid "R1:"
msgstr "R1:"

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:155
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:130
msgid "R2:"
msgstr "R2:"

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:169
msgid "Vout:"
msgstr "Vout:"

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:183
#: pcb_calculator/dialogs/dialog_regulator_form_base.cpp:37
msgid "Vref:"
msgstr "Vref:"

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:185
msgid ""
"The internal reference voltage of the regulator.\n"
"Should not be 0."
msgstr ""
"레귤레이터의 내부 기준 전압입니다.\n"
"0이 될 수 없습니다."

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:199
#: pcb_calculator/dialogs/dialog_regulator_form_base.cpp:61
msgid "Iadj:"
msgstr "ladj:"

#: pcb_calculator/calculator_panels/panel_regulator_base.cpp:201
msgid "For 3 terminal regulators only, the  Adjust pin current."
msgstr "3 단자 레귤레이터 전용으로,  핀의 전류를 더합니다."

#: pcb_calculator/calculator_panels/panel_rf_attenuators.cpp:220
#, c-format
msgid "Attenuation more than %f dB"
msgstr "감쇠량은 %f dB보다 크게 설정하세요"

#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:24
msgid "Pi"
msgstr "파이"

#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:24
msgid "Tee"
msgstr "T형"

#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:24
msgid "Bridged tee"
msgstr "브릿지 T형"

#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:24
msgid "Resistive splitter"
msgstr "저항 분할형"

#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:26
msgid "Attenuators"
msgstr "감쇠기"

#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:51
msgid "Attenuation (a):"
msgstr "감쇠 (a):"

#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:60
msgid "dB"
msgstr "dB"

#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:64
msgid "Zin:"
msgstr "Zin:"

#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:73
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:86
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:126
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:137
#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:148
msgid "Ohms"
msgstr "옴"

#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:77
msgid "Zout:"
msgstr "Zout:"

#: pcb_calculator/calculator_panels/panel_rf_attenuators_base.cpp:141
msgid "R3:"
msgstr "R3:"

#: pcb_calculator/calculator_panels/panel_track_width.cpp:61
msgid "Temperature rise"
msgstr "온도 상승"

#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:31
msgid "Current (I):"
msgstr "전류 (I):"

#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:42
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:167
msgid "Temperature rise:"
msgstr "온도 상승:"

#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:53
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:54
msgid "Conductor length:"
msgstr "도체 길이:"

#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:66
msgid "Copper resistivity:"
msgstr "구리 저항:"

#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:95
msgid "External Layer Traces"
msgstr "외부 레이어 추적"

#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:103
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:199
msgid "Trace width (W):"
msgstr "배선 두께 (W):"

#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:115
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:213
msgid "Trace thickness (H):"
msgstr "트레이스 두께 (H):"

#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:136
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:234
msgid "Cross-section area:"
msgstr "단면적:"

#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:144
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:242
msgid "mm ^ 2"
msgstr "mm²"

#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:148
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:246
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:226
msgid "Resistance:"
msgstr "저항:"

#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:172
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:270
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:250
msgid "Power loss:"
msgstr "전력 손실:"

#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:180
#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:278
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:258
#: pcb_calculator/widgets/unit_selector.cpp:280
msgid "W"
msgstr "W"

#: pcb_calculator/calculator_panels/panel_track_width_base.cpp:191
msgid "Internal Layer Traces"
msgstr "내부 레이어 추적"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:23
msgid "Microstrip Line"
msgstr "마이크로스트립 선"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:23
msgid "Coplanar wave guide"
msgstr "동일 평면 도파관 (CPW)"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:23
msgid "Coplanar wave guide w/ ground plane"
msgstr "접지면을 포함한 동일 평면 도파관"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:23
msgid "Rectangular Waveguide"
msgstr "구형 도파관"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:23
msgid "Coaxial Line"
msgstr "동축 선"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:23
msgid "Coupled Microstrip Line"
msgstr "결합된 마이크로스트립 선"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:23
msgid "Stripline"
msgstr "스트립라인"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:23
msgid "Twisted Pair"
msgstr "연선"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:25
msgid "Transmission Line Type"
msgstr "전송 선 유형"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:42
msgid "Substrate Parameters"
msgstr "기판 매개변수"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:50
msgid "Er:"
msgstr "Er:"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:69
msgid "Tan delta:"
msgstr "Tan delta:"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:88
msgid "Rho:"
msgstr "Rho:"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:90
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:126
msgid "Specific resistance in ohms * meters"
msgstr "옴 * 미터 단위의 비저항"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:109
msgid "H:"
msgstr "H:"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:121
msgid "H_t:"
msgstr "H_t:"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:133
msgid "T:"
msgstr "T:"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:145
msgid "Rough:"
msgstr "균일성:"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:157
msgid "Insulator mu:"
msgstr "절연체 mu:"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:169
msgid "Conductor mu:"
msgstr "도체 mu:"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:188
msgid "Component Parameters"
msgstr "컴포넌트 매개변수"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:196
#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:27
msgid "Frequency:"
msgstr "주파수:"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:233
msgid "Physical Parameters"
msgstr "물리적 매개변수"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:298
msgid "Analyze"
msgstr "분석"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:307
msgid "Synthesize"
msgstr "합성"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:320
msgid "Electrical Parameters"
msgstr "전기적 매개변수"

#: pcb_calculator/calculator_panels/panel_transline_base.cpp:371
#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:218
msgid "Results"
msgstr "결과"

#: pcb_calculator/calculator_panels/panel_via_size.cpp:92
#: pcb_calculator/calculator_panels/panel_wavelength.cpp:258
#: pcb_calculator/transline_dlg_funct.cpp:43
msgid "Relative Dielectric Constants"
msgstr "비유전율"

#: pcb_calculator/calculator_panels/panel_via_size.cpp:105
msgid "Electrical Resistivity in Ohm*m"
msgstr "전기 저항 (Ω*m)"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:31
msgid "Finished hole diameter (D):"
msgstr "완성된 홀 직경 (D):"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:45
msgid "Plating thickness (T):"
msgstr "도금 두께 (T):"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:57
msgid "Via length:"
msgstr "비아 길이:"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:59
msgid "Via length is the board thickness for through hole vias"
msgstr "비아 길이는 스루홀 비아의 기판 두께"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:71
msgid "Via pad diameter:"
msgstr "비아 패드 직경:"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:73
msgid "Diameter of pad surrounding via (annular ring)"
msgstr "비아를 둘러싼 패드의 직경 (환형 고리)"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:85
msgid "Clearance hole diameter:"
msgstr "클리어런스 홀 직경:"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:87
msgid "Diameter of clearance hole in ground plane(s)"
msgstr "접지면의 클리어런스 홀 직경"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:99
msgid "Z0:"
msgstr "Z0:"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:101
msgid "Characteristic impedance of conductor"
msgstr "도체의 특성 임피던스"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:113
msgid "Applied current:"
msgstr "적용된 전류:"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:124
msgid "Plating resistivity:"
msgstr "도금 저항성:"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:146
msgid "Substrate relative permittivity:"
msgstr "기판 상대 유전율:"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:148
msgid "Relative dielectric constant (epsilon r)"
msgstr "비유전율 (엡실론 r)"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:169
msgid "Maximum acceptable rise in temperature"
msgstr "상승 온도의 최대 허용치"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:180
msgid "Pulse rise time:"
msgstr "펄스 상승 시간:"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:182
msgid "Pulse rise time to calculate reactance"
msgstr "리액턴스 계산을 위한 펄스 상승 시간"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:189
#: pcb_calculator/widgets/unit_selector.cpp:316
msgid "ns"
msgstr "ns"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:191
msgid "nanoseconds"
msgstr "나노초"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:201
msgid ""
"Warning:\n"
"Via pad diameter >= Clearance hole diameter.\n"
"Some parameters cannot be calculated for a via inside a copper zone."
msgstr ""
"주의:\n"
"비아 패드 직경 >= 클리어런스 홀 직경.\n"
"일부 매개변수는 구리 영역 내의 비아에 대해서 계산될 수 없습니다."

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:262
msgid "Thermal resistance:"
msgstr "열 저항:"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:264
msgid "Using thermal conductivity value 401 Watts/(meter-Kelvin)"
msgstr "열전도율 = 410 W/(m⋅K) 사용"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:272
msgid "deg C/W"
msgstr "°C/W"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:276
msgid "Estimated ampacity:"
msgstr "예상 전류용량:"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:278
msgid "Based on temperature rise"
msgstr "온도 상승에 따라"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:290
msgid "Capacitance:"
msgstr "정전용량:"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:298
msgid "pF"
msgstr "pF"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:300
msgid "pico-Farad"
msgstr "피코-패러드"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:304
msgid "Rise time degradation:"
msgstr "상승 시간 저하:"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:306
msgid "Rise time degradation for given Z0 and calculated capacitance"
msgstr "주어진 Z0과 계산된 정전용량에 대한 상승 시간 저하"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:314
#: pcb_calculator/widgets/unit_selector.cpp:317
msgid "ps"
msgstr "ps"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:316
msgid "picoseconds"
msgstr "피코초"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:320
msgid "Inductance:"
msgstr "인덕턴스:"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:328
msgid "nH"
msgstr "nH"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:330
msgid "nano-Henry"
msgstr "나노-헨리"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:334
msgid "Reactance:"
msgstr "리액턴스 :"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:336
msgid "Inductive reactance for given rise time and calculated inductance"
msgstr "주어진 상승 시간 및 계산된 유도용량에 대한 유도 리액턴스"

#: pcb_calculator/calculator_panels/panel_via_size_base.cpp:355
msgid "Top view of via"
msgstr "비아의 평면도"

#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:39
msgid "Period:"
msgstr "주기:"

#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:51
msgid "Wavelength in vacuum:"
msgstr "진공 속의 파장:"

#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:63
msgid "Wavelength in medium:"
msgstr "중간 파장:"

#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:75
msgid "Speed in medium:"
msgstr "중간 속도:"

#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:87
msgid "er:"
msgstr "er:"

#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:89
msgid "relative permittivity (dielectric constant)"
msgstr "상대적 유전율 (유전 상수)"

#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:99
msgid "mur:"
msgstr "mur:"

#: pcb_calculator/calculator_panels/panel_wavelength_base.cpp:101
msgid "relative permeability"
msgstr "상대 투자율"

#: pcb_calculator/datafile_read_write.cpp:76
msgid "Data file error."
msgstr "데이터 파일 오류."

#: pcb_calculator/dialogs/dialog_regulator_form_base.cpp:44
msgid "Volt"
msgstr "V"

#: pcb_calculator/dialogs/dialog_regulator_form_base.h:57
msgid "Regulator Parameters"
msgstr "레귤레이터 매개변수"

#: pcb_calculator/eseries_display_help.h:2
msgid ""
"Passive components are commonly made with E-series values appropriate to "
"their precision.\n"
"Capacitors commonly use E12 values. 10% and 5% resistors commonly use E24 "
"values. 1%\n"
"resistors use E96 values. Other series are not commonly used.\n"
"\n"
"To select a value begin with the calculated target value and then round it "
"to 2\n"
"significant figures for E24 or below or 3 significant figures for E48 and "
"up.\n"
"Then find the value in the table which is nearest to the significant "
"figures\n"
"remaining and substitute it for those figures.\n"
"\n"
"For example if the calculated target value is 16,834.2Ω then this rounds to "
"16,800Ω.\n"
"The nearest value to 168 is 169 and the selected E96 value is 16.9kΩ.\n"
"\n"
"The value 0 is a special case and is not present in any series."
msgstr ""
"수동 부품은 일반적으로 정밀도에 적합한 E-시리즈 값으로 제작됩니다.\n"
"커패시터는 일반적으로 E12 값을 사용합니다. 10% 및 5% 저항기는 일반적으로 E24 "
"값을 사용합니다. \n"
"1% 저항기는 E96 값을 사용합니다. 다른 계열은 일반적으로 사용되지 않습니다.\n"
"\n"
"값을 선택하려면 계산된 목표 값으로 시작한 다음 E24 이하인 경우 소수점 둘째 자"
"리로, \n"
"E48 이상인 경우 소수점 셋째 자리로 반올림합니다.\n"
"그런 다음 표에서 남은 유효 수치에 가장 가까운 값을 찾아서 \n"
"해당 수치로 대체합니다.\n"
"\n"
"예를 들어 계산된 목표 값이 16,834.2Ω인 경우 16,800Ω으로 반올림됩니다.\n"
"168에 가장 가까운 값은 169이며 선택한 E96 값은 16.9kΩ입니다.\n"
"\n"
"값 0은 특수한 경우이며 어떤 계열에도 존재하지 않습니다."

#: pcb_calculator/fusing_current_help.h:2
msgid ""
"You can use this calculator to check if a small track can handle a large "
"current for a short period of time.<br>\n"
"This tool allows you to design a track fuse but should be used as an "
"estimate only.\n"
"\n"
"The calculator estimates the energy required to heat the wire up<br>\n"
"to its melting point as well as the energy required for the change of phase."
"<br>\n"
"This energy is then compared to the one dissipated by the wire resistance."
msgstr ""
"이 계산기를 사용하여 작은 트랙이 짧은 시간 동안 큰 전류를 처리할 수 있는지 확"
"인할 수 있습니다.<br>\n"
"이 도구를 사용하면 트랙 퓨즈를 설계할 수 있지만 추정치로만 사용해야 합니다.\n"
"\n"
"계산기는 전선을 가열하는 데 필요한 에너지를 추정합니다<br>\n"
"녹는점과 상 변화에 필요한 에너지.<br>\n"
"그런 다음 이 에너지를 와이어 저항에 의해 소실된 에너지와 비교합니다."

#: pcb_calculator/galvanic_corrosion_help.h:2
msgid ""
"This table shows the difference in electrochemical potential between various "
"metals and alloys. Galvanic corrosion affects different metals in contact "
"and under certain conditions.<br>\n"
"The anode of an electrochemical pair gets oxidized and eaten away, while the "
"cathode gets dissolved metals plated onto it but stays protected.<br>\n"
"A positive number indicates that the row is anodic (-) and the column is "
"cathodic (+), cold and warm coloring hues also indicate rows' potential."
"<br>\n"
"EN 50310 suggests a voltage difference below 300mV. Known practices make use "
"of a third interface metal in between the main pair(ie the ENIG surface "
"finish).<br>\n"
"Selected cells shown with the default system's coloring choice after a table "
"refill.\n"
msgstr ""
"이 표는 다양한 금속과 합금 간의 전기화학적 전위차를 보여줍니다. 갈바닉 부식"
"은 접촉 및 특정 조건에서 다양한 금속에 영향을 미칩니다.<br>\n"
"전기화학 쌍의 양극은 산화되고 부식되는 반면 음극은 용해된 금속이 도금되지만 "
"보호된 상태를 유지합니다.<br>\n"
"양수는 행이 양극(-)이고 열이 음극(+)임을 나타냅니다. 차갑고 따뜻한 색조도 행"
"의 잠재력을 나타냅니다.<br>\n"
"EN 50310은 300mV 미만의 전압 차이를 제안합니다. 알려진 관행은 주 쌍(예: ENIG "
"표면 마감) 사이에 세 번째 인터페이스 금속을 사용합니다.<br>\n"
"테이블을 다시 채운 후 기본 시스템의 색상 선택과 함께 선택된 셀이 표시됩니"
"다.\n"

#: pcb_calculator/iec60664_help.h:2
msgid ""
"The goal of the IEC60664-1 is to provide guidance on designing insulation "
"for products that have a connection to mains supply.\n"
"\n"
"However some cases are not covered by this calculator:\n"
"\n"
"- For frequencies higher than 30kHz, the dielectric perfomances are "
"degraded. IEC60664-4 covers those cases\n"
"- When using a conformal coating or a potting in order to protect for "
"pollution, if all conditions specified by IEC60664-3 are met, the clearance "
"and creepage distances can be reduced. Soldermask is usually not considered "
"as a conformal coating.\n"
"- Insulations trough liquids, compressed air or gases other than air are not "
"in the scope of IEC60664"
msgstr ""
"IEC60664-1의 목표는 전원 공급 장치에 연결되는 제품의 단열 설계에 대한 지침을 "
"제공하는 것입니다.\n"
"\n"
"그러나 일부 사례는 이 계산기에서 다루지 않습니다:\n"
"\n"
"- 30kHz 이상의 주파수에서는 유전체 성능이 저하됩니다. IEC60664-4는 이러한 경"
"우를 다룹니다.\n"
"- 오염으로부터 보호하기 위해 컨포멀 코팅 또는 포팅을 사용하는 경우 IEC60664-3"
"에 지정된 모든 조건이 충족되면 클리어런스 및 연면 거리를 줄일 수 있습니다. 솔"
"더마스크는 일반적으로 컨포멀 코팅으로 간주되지 않습니다.\n"
"- 공기 이외의 액체, 압축 공기 또는 가스를 통한 단열재는 IEC60664의 범위에 포"
"함되지 않음"

#: pcb_calculator/pcb_calculator_frame.cpp:69
msgid "KiCad Calculator Tools"
msgstr "계산기 도구"

#: pcb_calculator/pcb_calculator_frame.cpp:163
msgid "General system design"
msgstr "일반 시스템 설계"

#: pcb_calculator/pcb_calculator_frame.cpp:165
msgid "Regulators"
msgstr "레귤레이터"

#: pcb_calculator/pcb_calculator_frame.cpp:166
msgid "Resistor Calculator"
msgstr "저항 계산기"

#: pcb_calculator/pcb_calculator_frame.cpp:168
msgid "Power, current and isolation"
msgstr "전력, 전류 및 절연"

#: pcb_calculator/pcb_calculator_frame.cpp:170
msgid "Electrical Spacing"
msgstr "전기적 간격"

#: pcb_calculator/pcb_calculator_frame.cpp:173
msgid "Fusing Current"
msgstr "융합 전류"

#: pcb_calculator/pcb_calculator_frame.cpp:174
msgid "Cable Size"
msgstr "케이블 크기"

#: pcb_calculator/pcb_calculator_frame.cpp:176
msgid "High Speed"
msgstr "고속"

#: pcb_calculator/pcb_calculator_frame.cpp:178
msgid "Wavelength"
msgstr "파장"

#: pcb_calculator/pcb_calculator_frame.cpp:179
msgid "RF Attenuators"
msgstr "RF 감쇠기"

#: pcb_calculator/pcb_calculator_frame.cpp:180
msgid "Transmission Lines"
msgstr "전송 라인"

#: pcb_calculator/pcb_calculator_frame.cpp:182
msgid "Memo"
msgstr "메모"

#: pcb_calculator/pcb_calculator_frame.cpp:184
msgid "E-Series"
msgstr "E-시리즈"

#: pcb_calculator/pcb_calculator_frame.cpp:185
msgid "Color Code"
msgstr "색상 코드"

#: pcb_calculator/pcb_calculator_frame.cpp:186
msgid "Board Classes"
msgstr "보드 클래스"

#: pcb_calculator/pcb_calculator_frame.cpp:187
msgid "Galvanic Corrosion"
msgstr "갈바닉 부식"

#: pcb_calculator/pcb_calculator_frame.cpp:360
msgid "Write Data Failed"
msgstr "데이터 쓰기 실패"

#: pcb_calculator/pcb_calculator_frame.cpp:364
msgid ""
"No data filename to save modifications.\n"
"Do you want to exit and abandon your changes?"
msgstr ""
"변경 사항을 저장하는 데이터 파일 이름이 없습니다.\n"
"변경 사항을 취소하고 종료합니까?"

#: pcb_calculator/pcb_calculator_frame.cpp:374
#, c-format
msgid ""
"Unable to write file '%s'\n"
"Do you want to exit and abandon your changes?"
msgstr ""
"파일 '%s'에 쓸 수 없습니다\n"
"변경 사항을 취소하고 종료 하시겠습니까?"

#: pcb_calculator/r_calculator_help.h:2
msgid ""
"- This calculator finds combinations of standard E-series (between 10Ω and "
"1MΩ) to create arbitrary values.\n"
"- You can enter the required resistance from 0.0025 to 4000 kΩ.\n"
"- Solutions using up to 4 components are given.\n"
"\n"
"The requested value is always excluded from the solution set.<br>\n"
"Optionally up to two additional values can be excluded in case of component "
"availability problems.\n"
"\n"
"Solutions are given in the following formats:\n"
"\n"
"\tR1 + R2 +...+ Rn\tresistors in series\n"
"\tR1 | R2 |...| Rn\tresistors in parallel\n"
"\tR1 + (R2|R3)...\t\tany combination of the above\n"
msgstr ""
"- 이 계산기는 표준 E 시리즈(10Ω에서 1MΩ 사이)의 조합을 찾아 임의의 값을 생성"
"합니다.\n"
"- 필요한 저항값을 0.0025~4000kΩ까지 입력할 수 있습니다.\n"
"- 최대 4개의 구성요소를 활용한 솔루션이 제공됩니다.\n"
"\n"
"요청된 값은 항상 솔루션 세트에서 제외됩니다.<br>\n"
"구성요소 가용성 문제가 있는 경우 선택적으로 최대 2개의 추가 값을 제외할 수 있"
"습니다.\n"
"\n"
"솔루션은 다음 형식으로 제공됩니다.\n"
"\n"
"\tR1 + R2 +...+ Rn\t직렬저항 조합\n"
"\tR1 | R2 |...| Rn\t\t병렬저항 조합\n"
"\tR1 + (R2|R3)...\t\t위의 임의의 조합\n"

#: pcb_calculator/tracks_width_versus_current_formula.h:2
msgid ""
"If you specify the maximum current, then the trace widths will be calculated "
"to suit.\n"
"\n"
"If you specify one of the trace widths, the maximum current it can handle "
"will be calculated. The width for the other trace to also handle this "
"current will then be calculated.\n"
"\n"
"The controlling value is shown in bold.\n"
"\n"
"The calculations are valid for currents up to 35 A (external) or 17.5 A "
"(internal), temperature rises up to 100 °C, and widths of up to 400 mils (10 "
"mm).\n"
"\n"
"The formula, from IPC 2221, is\n"
"<center>___I = K &middot; &Delta;T<sup>0.44</sup> &middot; (W &middot; "
"H)<sup>0.725</sup>___</center>\n"
"where:<br>\n"
"___I___ is maximum current in A<br>\n"
"___&Delta;T___ is temperature rise above ambient in &deg;C<br>\n"
"___W___ is width in mils<br>\n"
"___H___ is thickness (height) in mils<br>\n"
"___K___ is 0.024 for internal traces or 0.048 for external traces\n"
msgstr ""
"최대전류를 지정하면, 배선의 폭은 이에 맞추어 계산됩니다.\n"
"\n"
"배선의 폭 중 하나를 지정하면, 이를 처리할 수 있는 최대 전류가 계산됩니다. 이"
"후, 다른 배선에서 최대 전류를 처리하기 위한 폭 또한 계산됩니다.\n"
"\n"
"제어 값은 볼드체로 표시됩니다.\n"
"\n"
"계산값은 전류 최대 35A (외부) 또는 17.5A (내부), 온도 최대 100ºC, 그리고 폭 "
"400mil (10mm) 까지의 범위에서 유효합니다.\n"
"\n"
"IPC 2221에서의 수식은\n"
"<center>___I = K &middot; &Delta;T<sup>0.44</sup> &middot; (W &middot; "
"H)<sup>0.725</sup>___</center>\n"
"이때:<br>\n"
"___I___ = 최대 전류 (A)<br>\n"
"___&Delta;T___ = 주위 환경으로부터의 온도 상승 &deg;C<br>\n"
"___W___ = 폭 (mils)<br>\n"
"___H___ = 두께 (mils)<br>\n"
"___K___ 내부 배선은 0.024, 외부 배선은 0.048\n"

#: pcb_calculator/transline_dlg_funct.cpp:61
msgid "Dielectric Loss Factor"
msgstr "유전 손실 계수"

#: pcb_calculator/transline_dlg_funct.cpp:79
msgid "Specific Resistance"
msgstr "비저항"

#: pcb_calculator/transline_ident.cpp:93
msgid "Substrate relative permittivity (dielectric constant)"
msgstr "기판 상대 유전율(유전 상수)"

#: pcb_calculator/transline_ident.cpp:97
msgid "Dielectric loss (dissipation factor)"
msgstr "유전 손실 (유전 정접)"

#: pcb_calculator/transline_ident.cpp:103
msgid ""
"Electrical resistivity or specific electrical resistance of conductor "
"(ohm*meter)"
msgstr "도체의 전기 저항성 또는 특정한 전기 저항 (Ω・m)"

#: pcb_calculator/transline_ident.cpp:110
msgid "Frequency of the input signal"
msgstr "입력 신호의 주파수"

#: pcb_calculator/transline_ident.cpp:119
#: pcb_calculator/transline_ident.cpp:161
#: pcb_calculator/transline_ident.cpp:195
#: pcb_calculator/transline_ident.cpp:231
#: pcb_calculator/transline_ident.cpp:266
#: pcb_calculator/transline_ident.cpp:351
#: pcb_calculator/transline_ident.cpp:385
#, c-format
msgid "Effective %s:"
msgstr "유효 %s:"

#: pcb_calculator/transline_ident.cpp:120
#: pcb_calculator/transline_ident.cpp:162
#: pcb_calculator/transline_ident.cpp:196
#: pcb_calculator/transline_ident.cpp:232
#: pcb_calculator/transline_ident.cpp:267
#: pcb_calculator/transline_ident.cpp:352
#: pcb_calculator/transline_ident.cpp:386
msgid "Conductor losses:"
msgstr "도체 손실:"

#: pcb_calculator/transline_ident.cpp:121
#: pcb_calculator/transline_ident.cpp:163
#: pcb_calculator/transline_ident.cpp:197
#: pcb_calculator/transline_ident.cpp:233
#: pcb_calculator/transline_ident.cpp:268
#: pcb_calculator/transline_ident.cpp:353
#: pcb_calculator/transline_ident.cpp:387
msgid "Dielectric losses:"
msgstr "유전 손실:"

#: pcb_calculator/transline_ident.cpp:122
#: pcb_calculator/transline_ident.cpp:164
#: pcb_calculator/transline_ident.cpp:198
#: pcb_calculator/transline_ident.cpp:309
#: pcb_calculator/transline_ident.cpp:354
#: pcb_calculator/transline_ident.cpp:388
msgid "Skin depth:"
msgstr "표피의 깊이:"

#: pcb_calculator/transline_ident.cpp:125
#: pcb_calculator/transline_ident.cpp:167
#: pcb_calculator/transline_ident.cpp:201
#: pcb_calculator/transline_ident.cpp:313
#: pcb_calculator/transline_ident.cpp:357
msgid "Height of substrate"
msgstr "기판의 높이"

#: pcb_calculator/transline_ident.cpp:127
#: pcb_calculator/transline_ident.cpp:315
msgid "Height of box top"
msgstr "상자의 높이"

#: pcb_calculator/transline_ident.cpp:130
#: pcb_calculator/transline_ident.cpp:169
#: pcb_calculator/transline_ident.cpp:203
#: pcb_calculator/transline_ident.cpp:317
#: pcb_calculator/transline_ident.cpp:362
msgid "Strip thickness"
msgstr "스트립 두께"

#: pcb_calculator/transline_ident.cpp:132
#: pcb_calculator/transline_ident.cpp:319
msgid "Roughness"
msgstr "표면 거칠기"

#: pcb_calculator/transline_ident.cpp:133
#: pcb_calculator/transline_ident.cpp:320
msgid "Conductor roughness"
msgstr "도체 거칠기"

#: pcb_calculator/transline_ident.cpp:136
msgid "substrate"
msgstr "기판"

#: pcb_calculator/transline_ident.cpp:137
msgid "Relative permeability (mu) of substrate"
msgstr "기판의 상대 투자율 (mu)"

#: pcb_calculator/transline_ident.cpp:140
#: pcb_calculator/transline_ident.cpp:172
#: pcb_calculator/transline_ident.cpp:206
#: pcb_calculator/transline_ident.cpp:243
#: pcb_calculator/transline_ident.cpp:278
#: pcb_calculator/transline_ident.cpp:323
#: pcb_calculator/transline_ident.cpp:365
#: pcb_calculator/transline_ident.cpp:395
msgid "conductor"
msgstr "도체"

#: pcb_calculator/transline_ident.cpp:141
#: pcb_calculator/transline_ident.cpp:173
#: pcb_calculator/transline_ident.cpp:207
#: pcb_calculator/transline_ident.cpp:244
#: pcb_calculator/transline_ident.cpp:279
#: pcb_calculator/transline_ident.cpp:324
#: pcb_calculator/transline_ident.cpp:366
#: pcb_calculator/transline_ident.cpp:396
msgid "Relative permeability (mu) of conductor"
msgstr "도체의 상대 투과율 (mu)"

#: pcb_calculator/transline_ident.cpp:145
#: pcb_calculator/transline_ident.cpp:177
#: pcb_calculator/transline_ident.cpp:211
#: pcb_calculator/transline_ident.cpp:328
#: pcb_calculator/transline_ident.cpp:369
msgid "Line width"
msgstr "선 두께"

#: pcb_calculator/transline_ident.cpp:147
#: pcb_calculator/transline_ident.cpp:181
#: pcb_calculator/transline_ident.cpp:215
#: pcb_calculator/transline_ident.cpp:289
#: pcb_calculator/transline_ident.cpp:332
#: pcb_calculator/transline_ident.cpp:371
msgid "Line length"
msgstr "선 길이"

#: pcb_calculator/transline_ident.cpp:150
#: pcb_calculator/transline_ident.cpp:184
#: pcb_calculator/transline_ident.cpp:218
#: pcb_calculator/transline_ident.cpp:255
#: pcb_calculator/transline_ident.cpp:292
#: pcb_calculator/transline_ident.cpp:374
#: pcb_calculator/transline_ident.cpp:413
msgid "Characteristic impedance"
msgstr "특성 임피던스"

#: pcb_calculator/transline_ident.cpp:153
#: pcb_calculator/transline_ident.cpp:187
#: pcb_calculator/transline_ident.cpp:221
#: pcb_calculator/transline_ident.cpp:258
#: pcb_calculator/transline_ident.cpp:295
#: pcb_calculator/transline_ident.cpp:344
#: pcb_calculator/transline_ident.cpp:377
#: pcb_calculator/transline_ident.cpp:416
msgid "Electrical length"
msgstr "전기적 길이"

#: pcb_calculator/transline_ident.cpp:179
#: pcb_calculator/transline_ident.cpp:213
#: pcb_calculator/transline_ident.cpp:330
msgid "Gap width"
msgstr "갭 너비"

#: pcb_calculator/transline_ident.cpp:230
msgid "ZF(H10) = Ey / Hx:"
msgstr "ZF(H10) = Ey / Hx:"

#: pcb_calculator/transline_ident.cpp:234
#: pcb_calculator/transline_ident.cpp:269
msgid "TE-modes:"
msgstr "TE-모드:"

#: pcb_calculator/transline_ident.cpp:235
#: pcb_calculator/transline_ident.cpp:270
msgid "TM-modes:"
msgstr "TM-모드:"

#: pcb_calculator/transline_ident.cpp:239
#: pcb_calculator/transline_ident.cpp:274
msgid "insulator"
msgstr "절연체"

#: pcb_calculator/transline_ident.cpp:240
#: pcb_calculator/transline_ident.cpp:275
msgid "Relative permeability (mu) of insulator"
msgstr "절연체의 상대 투과율 (μ)"

#: pcb_calculator/transline_ident.cpp:248
msgid "Width of waveguide"
msgstr "도파관의 폭"

#: pcb_calculator/transline_ident.cpp:250
msgid "Height of waveguide"
msgstr "도파관의 높이"

#: pcb_calculator/transline_ident.cpp:252
msgid "Waveguide length"
msgstr "도파관 길이"

#: pcb_calculator/transline_ident.cpp:283
#: pcb_calculator/transline_ident.cpp:404
msgid "Din"
msgstr "Din"

#: pcb_calculator/transline_ident.cpp:284
#: pcb_calculator/transline_ident.cpp:405
msgid "Inner diameter (conductor)"
msgstr "내경 (도체)"

#: pcb_calculator/transline_ident.cpp:286
#: pcb_calculator/transline_ident.cpp:407
msgid "Dout"
msgstr "Dout"

#: pcb_calculator/transline_ident.cpp:287
#: pcb_calculator/transline_ident.cpp:408
msgid "Outer diameter (insulator)"
msgstr "외경 (절연체)"

#: pcb_calculator/transline_ident.cpp:303
#, c-format
msgid "Effective %s (even):"
msgstr "유효 %s (even):"

#: pcb_calculator/transline_ident.cpp:304
#, c-format
msgid "Effective %s (odd):"
msgstr "유효 %s (odd):"

#: pcb_calculator/transline_ident.cpp:305
msgid "Conductor losses (even):"
msgstr "도체 손실 (even):"

#: pcb_calculator/transline_ident.cpp:306
msgid "Conductor losses (odd):"
msgstr "도체 손실 (odd):"

#: pcb_calculator/transline_ident.cpp:307
msgid "Dielectric losses (even):"
msgstr "유전 손실 (even):"

#: pcb_calculator/transline_ident.cpp:308
msgid "Dielectric losses (odd):"
msgstr "유전 손실 (odd):"

#: pcb_calculator/transline_ident.cpp:310
msgid "Differential Impedance (Zd):"
msgstr "차동 임피던스(Zd):"

#: pcb_calculator/transline_ident.cpp:335
msgid "Zeven"
msgstr "Zeven"

#: pcb_calculator/transline_ident.cpp:336
msgid "Even mode impedance (lines driven by common voltages)"
msgstr "Even 모드 임피던스 (선로는 동일 전압에서 구동됨)"

#: pcb_calculator/transline_ident.cpp:339
msgid "Zodd"
msgstr "Zodd"

#: pcb_calculator/transline_ident.cpp:340
msgid "Odd mode impedance (lines driven by opposite (differential) voltages)"
msgstr "odd 모드 임피던스 (선로는 역 (차동) 전압에서 구동됨)"

#: pcb_calculator/transline_ident.cpp:359
msgid "Distance between strip and top metal"
msgstr "스트립 라인과 상단 금속 사이의 거리"

#: pcb_calculator/transline_ident.cpp:391
msgid "Twists"
msgstr "비틀림 수"

#: pcb_calculator/transline_ident.cpp:392
msgid "Number of twists per length"
msgstr "길이당 꼬임 수"

#: pcb_calculator/transline_ident.cpp:400
msgid "environment"
msgstr "환경"

#: pcb_calculator/transline_ident.cpp:401
msgid "Relative permittivity of environment"
msgstr "환경의 상대 유전율"

#: pcb_calculator/transline_ident.cpp:410
msgid "Cable length"
msgstr "케이블 길이"

#: pcb_calculator/widgets/unit_selector.cpp:35
msgid "um"
msgstr "um"

#: pcb_calculator/widgets/unit_selector.cpp:36
#: pcb_calculator/widgets/unit_selector.cpp:210
msgid "cm"
msgstr "cm"

#: pcb_calculator/widgets/unit_selector.cpp:37
msgid "mil"
msgstr "mil"

#: pcb_calculator/widgets/unit_selector.cpp:38
#: pcb_calculator/widgets/unit_selector.cpp:213
#: pcbnew/dialogs/dialog_export_idf_base.cpp:48
#: pcbnew/dialogs/dialog_export_step_base.cpp:72
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:67
msgid "inch"
msgstr "인치"

#: pcb_calculator/widgets/unit_selector.cpp:100
msgid "GHz"
msgstr "GHz"

#: pcb_calculator/widgets/unit_selector.cpp:101
msgid "MHz"
msgstr "MHz"

#: pcb_calculator/widgets/unit_selector.cpp:102
msgid "kHz"
msgstr "kHz"

#: pcb_calculator/widgets/unit_selector.cpp:129
msgid "rad"
msgstr "rad"

#: pcb_calculator/widgets/unit_selector.cpp:212
msgid "km"
msgstr "km"

#: pcb_calculator/widgets/unit_selector.cpp:214
msgid "feet"
msgstr "feet"

#: pcb_calculator/widgets/unit_selector.cpp:279
msgid "mW"
msgstr "mW"

#: pcb_calculator/widgets/unit_selector.cpp:288
msgid "m/s"
msgstr "m/s"

#: pcb_calculator/widgets/unit_selector.cpp:289
msgid "ft/s"
msgstr "ft/s"

#: pcb_calculator/widgets/unit_selector.cpp:290
msgid "km/h"
msgstr "km/h"

#: pcb_calculator/widgets/unit_selector.cpp:291
msgid "mi/h"
msgstr "mi/h"

#: pcbnew/array_creator.cpp:231
msgid "Create an array"
msgstr "배열 생성"

#: pcbnew/autorouter/ar_autoplacer.cpp:888
msgid "Autoplacing components..."
msgstr "부품 자동 배치 중..."

#: pcbnew/autorouter/ar_autoplacer.cpp:904
#, c-format
msgid "Autoplacing %s"
msgstr "자동 배치 %s"

#: pcbnew/autorouter/autoplace_tool.cpp:68
#, c-format
msgid "Board edges must be defined on the %s layer."
msgstr "기판의 모서리가 %s 레이어에 정의되어 있어야 합니다."

#: pcbnew/autorouter/autoplace_tool.cpp:89
msgid "Autoplace Components"
msgstr "부품 자동 배치"

#: pcbnew/autorouter/autoplace_tool.cpp:95
msgid "Autoplace components"
msgstr "부품 자동 배치"

#: pcbnew/board.cpp:807 pcbnew/drc/drc_cache_generator.cpp:155
msgid "Tessellating copper zones..."
msgstr "구리 영역 테셀레이션 중..."

#: pcbnew/board.cpp:1478 pcbnew/dialogs/dialog_board_statistics.cpp:692
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:78
#: pcbnew/dialogs/dialog_unused_pad_layers_base.cpp:27
#: pcbnew/footprint.cpp:1283 pcbnew/netinfo_item.cpp:108
#: pcbnew/pcb_draw_panel_gal.cpp:555 pcbnew/widgets/appearance_controls.cpp:329
#: pcbnew/widgets/panel_selection_filter.cpp:190
#: pcbnew/widgets/panel_selection_filter_base.cpp:45
msgid "Pads"
msgstr "패드"

#: pcbnew/board.cpp:1479 pcbnew/dialogs/dialog_board_statistics.cpp:698
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:155
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:80
#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:35
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:31
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:181
#: pcbnew/dialogs/dialog_unused_pad_layers_base.cpp:24
#: pcbnew/netinfo_item.cpp:123 pcbnew/pcb_draw_panel_gal.cpp:556
#: pcbnew/widgets/appearance_controls.cpp:328
#: pcbnew/widgets/panel_selection_filter.cpp:189
#: pcbnew/widgets/panel_selection_filter_base.cpp:41
msgid "Vias"
msgstr "비아"

#: pcbnew/board.cpp:1480 pcbnew/pcb_draw_panel_gal.cpp:557
msgid "Track Segments"
msgstr "배선 세그먼트"

#: pcbnew/board.cpp:1481 pcbnew/generators/pcb_tuning_pattern.cpp:1930
#: pcbnew/pcb_draw_panel_gal.cpp:558
#: pcbnew/widgets/appearance_controls.cpp:1025
#: pcbnew/widgets/appearance_controls.cpp:2358
#: pcbnew/widgets/appearance_controls_base.cpp:61
#: pcbnew/widgets/appearance_controls_base.cpp:151
#: pcbnew/widgets/search_handlers.cpp:271
msgid "Nets"
msgstr "네트"

#: pcbnew/board.cpp:1482 pcbnew/pcb_draw_panel_gal.cpp:559
msgid "Unrouted"
msgstr "라우팅되지 않음"

#: pcbnew/board_connected_item.cpp:194
msgid "NetClass"
msgstr "네트클래스"

#: pcbnew/board_connected_item.cpp:201
msgid "NetName"
msgstr "네트 이름"

#: pcbnew/board_connected_item.cpp:235
#: pcbnew/dialogs/dialog_board_setup.cpp:163
#: pcbnew/dialogs/dialog_global_deletion_base.cpp:43
#: pcbnew/dialogs/dialog_global_edit_teardrops.cpp:128
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:580
msgid "Teardrops"
msgstr "눈물 방울"

#: pcbnew/board_connected_item.cpp:237
msgid "Enable Teardrops"
msgstr "눈물방울 활성화"

#: pcbnew/board_connected_item.cpp:243
msgid "Best Length Ratio"
msgstr "최적 길이 비율"

#: pcbnew/board_connected_item.cpp:250
msgid "Max Length"
msgstr "최대 길이"

#: pcbnew/board_connected_item.cpp:256
msgid "Best Width Ratio"
msgstr "최적의 너비 비율"

#: pcbnew/board_connected_item.cpp:263
msgid "Max Width"
msgstr "최대 너비"

#: pcbnew/board_connected_item.cpp:269
msgid "Curve Points"
msgstr "곡선 점"

#: pcbnew/board_connected_item.cpp:275
msgid "Prefer Zone Connections"
msgstr "선호 영역 연결"

#: pcbnew/board_connected_item.cpp:281
msgid "Allow Teardrops To Span Two Tracks"
msgstr "눈물방울이 두 개의 트랙에 걸쳐 있도록 허용"

#: pcbnew/board_connected_item.cpp:287
msgid "Max Width Ratio"
msgstr "최대 너비 비율"

#: pcbnew/board_item.cpp:125
msgid "all copper layers"
msgstr "모근 구리 레이어"

#: pcbnew/board_item.cpp:136
msgid "and others"
msgstr "기타"

#: pcbnew/board_item.cpp:144
msgid "no layers"
msgstr "레이어 없음"

#: pcbnew/board_stackup_manager/board_stackup.cpp:339
#, c-format
msgid "Dielectric %d"
msgstr "유전체 %d"

#: pcbnew/board_stackup_manager/board_stackup.cpp:592
msgid "Top Silk Screen"
msgstr "상단 실크스크린"

#: pcbnew/board_stackup_manager/board_stackup.cpp:600
msgid "Top Solder Paste"
msgstr "상단 솔더 페이스트"

#: pcbnew/board_stackup_manager/board_stackup.cpp:608
msgid "Top Solder Mask"
msgstr "상단 솔더 마스크"

#: pcbnew/board_stackup_manager/board_stackup.cpp:652
msgid "Bottom Solder Mask"
msgstr "하단 솔더 마스크"

#: pcbnew/board_stackup_manager/board_stackup.cpp:660
msgid "Bottom Solder Paste"
msgstr "하단 솔더 페이스트"

#: pcbnew/board_stackup_manager/board_stackup.cpp:668
msgid "Bottom Silk Screen"
msgstr "하단 실크스크린"

#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager.cpp:45
msgid "Incorrect value for Epsilon R"
msgstr "엡실론 R에 대한 잘못된 값"

#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager.cpp:51
msgid "Incorrect value for Loss Tangent"
msgstr "손실 탄젠트에 대한 잘못된 값"

#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager.cpp:93
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:87
#: pcbnew/tools/drawing_stackup_table_tool.cpp:254
msgid "Material"
msgstr "재료"

#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager.cpp:94
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:102
#: pcbnew/tools/drawing_stackup_table_tool.cpp:274
msgid "Epsilon R"
msgstr "εR"

#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager.cpp:95
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:106
msgid "Loss Tan"
msgstr "탄젠트 손실"

#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager_base.cpp:35
msgid "Epsilon R:"
msgstr "εR:"

#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager_base.cpp:39
msgid "Loss Tan:"
msgstr "탄젠트 손실:"

#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager_base.cpp:60
msgid "Common materials:"
msgstr "공통 재료:"

#: pcbnew/board_stackup_manager/dialog_dielectric_list_manager_base.h:56
msgid "Dielectric Material Characteristics"
msgstr "유전체 재료 특성"

#: pcbnew/board_stackup_manager/panel_board_finish_base.cpp:20
msgid "Has castellated pads"
msgstr "카스텔레이티드 패드가 있음"

#: pcbnew/board_stackup_manager/panel_board_finish_base.cpp:23
msgid "Plated board edge"
msgstr "도금 패드 가장자리"

#: pcbnew/board_stackup_manager/panel_board_finish_base.cpp:31
msgid "Copper finish:"
msgstr "구리 마무리:"

#: pcbnew/board_stackup_manager/panel_board_finish_base.cpp:40
msgid "Edge card connectors:"
msgstr "에지 카드 커넥터:"

#: pcbnew/board_stackup_manager/panel_board_finish_base.cpp:44
msgid "Yes, bevelled"
msgstr "예, 경사진"

#: pcbnew/board_stackup_manager/panel_board_finish_base.cpp:48
msgid "Options for edge card connectors."
msgstr "에지 카드 커넥터용 옵션."

#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:116
msgid "Core"
msgstr "코어"

#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:117
msgid "PrePreg"
msgstr "프리프레그"

#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:213
#, c-format
msgid "Enter board thickness in %s:"
msgstr "%s에 보드 두께 입력:"

#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:218
#, c-format
msgid "Enter expected board thickness (min value %s):"
msgstr "예상되는 기판 두께를 입력하세요 (최소값은 %s입니다):"

#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:222
msgid "Adjust Unlocked Dielectric Layers"
msgstr "잠금 해제된 유전체 레이어 조정"

#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:231
#, c-format
msgid "Value too small (min value %s)."
msgstr "값이 너무 작습니다 (최소값 %s )."

#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:241
msgid "All dielectric  thickness layers are locked"
msgstr "모든 유전체 두께 레이어가 잠겨 있습니다"

#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:307
#, c-format
msgid "Layer '%s' (sublayer %d/%d)"
msgstr "레이어 '%s' (서브레이어 %d/%d)"

#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:322
msgid "Add Dielectric Layer"
msgstr "유전체 레이어 추가"

#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:325
#: pcbnew/dialogs/panel_setup_layers.cpp:848
msgid "Select layer to add:"
msgstr "추가할 레이어 선택:"

#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:370
#, c-format
msgid "Layer '%s' sublayer %d/%d"
msgstr "레이어 '%s' 하위 레이어 %d/%d"

#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:380
msgid "Remove Dielectric Layer"
msgstr "유전체 레이어 제거"

#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:383
msgid "Select layer to remove:"
msgstr "제거할 레이어 선택:"

#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:1165
msgid ""
"Incorrect value for Epsilon R (Epsilon R must be positive or null if not "
"used)"
msgstr ""
"Epsilon R에 대한 잘못된 값 (Epsilon R은 양수이거나 사용되지 않는 경우 null이"
"어야 함)"

#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:1186
msgid ""
"Incorrect value for Loss tg (Loss tg must be positive or null if not used)"
msgstr ""
"손실 탄젠트에 대한 잘못된 값 (손실 탄젠트값은 양수이거나 사용되지 않는 경우 "
"null이어야 함)"

#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:1232
msgid "A layer thickness is < 0. Fix it"
msgstr "레이어 두께가 < 0입니다. 수정하세요"

#: pcbnew/board_stackup_manager/panel_board_stackup.cpp:1684
msgid "Custom..."
msgstr "사용자 정의..."

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:22
#: pcbnew/dialogs/dialog_export_svg_base.cpp:50
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:500
msgid "Copper layers:"
msgstr "구리 레이어:"

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:24
#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:32
msgid "Select the number of copper layers in the stackup"
msgstr "스택업에서 동박 층의 수를 선택하세요"

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:28
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:53
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:118
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:184
msgid "8"
msgstr "8"

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:28
msgid "10"
msgstr "10"

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:28
msgid "12"
msgstr "12"

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:28
msgid "14"
msgstr "14"

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:28
msgid "16"
msgstr "16"

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:28
msgid "18"
msgstr "18"

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:28
msgid "20"
msgstr "20"

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:28
msgid "22"
msgstr "22"

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:28
msgid "24"
msgstr "24"

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:28
msgid "26"
msgstr "26"

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:28
msgid "28"
msgstr "28"

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:28
msgid "32"
msgstr "32"

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:39
msgid "Impedance controlled"
msgstr "임피던스 제어"

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:40
msgid ""
"If Impedance Controlled option is set,\n"
"Loss tangent and EpsilonR will be added to constraints."
msgstr ""
"임피던스 제어 옵션이 설정된 경우,\n"
"손실 탄젠트 및 EpsilonR이 제약 조건에 추가됩니다."

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:47
msgid "Add Dielectric Layer..."
msgstr "유전체 레이어 추가..."

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:50
msgid "Remove Dielectric Layer..."
msgstr "유전체 레이어 제거..."

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:79
#: pcbnew/build_BOM_from_board.cpp:108
msgid "Id"
msgstr "Id"

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:131
msgid "Board thickness from stackup:"
msgstr "스택업에서 기판 두께:"

#: pcbnew/board_stackup_manager/panel_board_stackup_base.cpp:141
msgid "Adjust Dielectric Thickness"
msgstr "유전체 두께 조정"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:38
msgid "ENIG"
msgstr "ENIG (무전해 니켈 금 도금)"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:39
msgid "ENEPIG"
msgstr "ENEPIG"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:40
msgid "HAL SnPb"
msgstr "HAL SnPb"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:41
msgid "HAL lead-free"
msgstr "HAL 무연납"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:42
msgid "Hard gold"
msgstr "하드 골드"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:43
msgid "Immersion tin"
msgstr "무전해 주석"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:44
msgid "Immersion nickel"
msgstr "치환 니켈도금"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:45
msgid "Immersion silver"
msgstr "치환 은도금"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:46
msgid "Immersion gold"
msgstr "무전해 금"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:47
msgid "HT_OSP"
msgstr "HT_OSP"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:48
msgid "OSP"
msgstr "OSP"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:50
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:69
#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:83
msgid "User defined"
msgstr "사용자 정의"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:62
msgid "Green"
msgstr "초록"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:63
msgid "Red"
msgstr "빨강"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:64
msgid "Blue"
msgstr "파랑"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:65
msgid "Purple"
msgstr "보라색"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:66
msgid "Black"
msgstr "검정색"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:67
msgid "White"
msgstr "흰색"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:68
msgid "Yellow"
msgstr "노랑"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:78
msgid "FR4 natural"
msgstr "FR4 내츄럴"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:79
msgid "PTFE natural"
msgstr "PTFE 내츄럴"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:80
msgid "Polyimide"
msgstr "폴리이미드"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:81
msgid "Phenolic natural"
msgstr "페놀 천연"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.cpp:82
msgid "Aluminum"
msgstr "알루미늄"

#: pcbnew/board_stackup_manager/stackup_predefined_prms.h:53
#: pcbnew/exporters/exporter_vrml.cpp:276
#: pcbnew/exporters/exporter_vrml.cpp:285
msgid "Not specified"
msgstr "지정하지 않음"

#: pcbnew/build_BOM_from_board.cpp:79
msgid "Cannot export BOM: there are no footprints on the PCB."
msgstr "BOM을 내보낼 수 없음: PCB에 풋프린트가 없습니다."

#: pcbnew/build_BOM_from_board.cpp:89
msgid "Save Bill of Materials"
msgstr "BOM 저장"

#: pcbnew/build_BOM_from_board.cpp:109
msgid "Designator"
msgstr "지정자"

#: pcbnew/build_BOM_from_board.cpp:111
msgid "Quantity"
msgstr "수량"

#: pcbnew/build_BOM_from_board.cpp:112
msgid "Designation"
msgstr "지정"

#: pcbnew/build_BOM_from_board.cpp:113
msgid "Supplier and ref"
msgstr "공급자와 참조"

#: pcbnew/cleanup_item.cpp:46
msgid "Remove track shorting two nets"
msgstr "두 개의 네트를 단락시키는 배선 제거"

#: pcbnew/cleanup_item.cpp:47
msgid "Remove via shorting two nets"
msgstr "두 개의 네트를 단락시켜 제거"

#: pcbnew/cleanup_item.cpp:48
msgid "Remove redundant via"
msgstr "중복된 비아 삭제"

#: pcbnew/cleanup_item.cpp:49
msgid "Remove duplicate track"
msgstr "중복된 배선 제거"

#: pcbnew/cleanup_item.cpp:50
msgid "Merge co-linear tracks"
msgstr "동일 선상의 배선 병합"

#: pcbnew/cleanup_item.cpp:51
msgid "Remove track not connected at both ends"
msgstr "양쪽 끝에 연결되지 않은 배선 제거"

#: pcbnew/cleanup_item.cpp:52
msgid "Remove via connected on less than 2 layers"
msgstr "2개 미만의 레이어에 연결된 비아 제거"

#: pcbnew/cleanup_item.cpp:53
msgid "Remove zero-length track"
msgstr "길이가 0인 배선 제거"

#: pcbnew/cleanup_item.cpp:54
msgid "Remove track inside pad"
msgstr "패드 내부 배선 제거"

#: pcbnew/cleanup_item.cpp:57
msgid "Remove zero-size graphic"
msgstr "크기가 0인 그래픽 제거"

#: pcbnew/cleanup_item.cpp:58
msgid "Remove duplicated graphic"
msgstr "중복된 그래픽 제거"

#: pcbnew/cleanup_item.cpp:59
msgid "Convert lines to rectangle"
msgstr "선을 직사각형으로 변환"

#: pcbnew/cleanup_item.cpp:60
msgid "Merge overlapping shapes into pad"
msgstr "겹치는 도형을 패드에 병합"

#: pcbnew/cleanup_item.cpp:64
msgid "Unknown cleanup action"
msgstr "알 수 없는 정리 작업"

#: pcbnew/connectivity/connectivity_data.cpp:109
msgid "Updating nets..."
msgstr "네트 업데이트 중..."

#: pcbnew/convert_shape_list_to_polygon.cpp:310
#: pcbnew/convert_shape_list_to_polygon.cpp:455
#: pcbnew/convert_shape_list_to_polygon.cpp:566
#: pcbnew/convert_shape_list_to_polygon.cpp:578
msgid "(self-intersecting)"
msgstr "(자체 교차)"

#: pcbnew/convert_shape_list_to_polygon.cpp:463
msgid "(not a closed shape)"
msgstr "(닫혀 있지 않은 모양)"

#: pcbnew/convert_shape_list_to_polygon.cpp:516
msgid "(multiple board outlines not supported)"
msgstr "(여러 보드 외곽선은 지원되지 않음)"

#: pcbnew/convert_shape_list_to_polygon.cpp:652
#, c-format
msgid "(Rectangle has null or very small size: %d nm)"
msgstr "(직사각형의 크기가 0이거나 매우 작음: %d nm)"

#: pcbnew/convert_shape_list_to_polygon.cpp:669
#, c-format
msgid "(Circle has null or very small radius: %d nm)"
msgstr "(원의 반지름이 0이거나 매우 작음: %d nm)"

#: pcbnew/convert_shape_list_to_polygon.cpp:689
#, c-format
msgid "(Segment has null or very small length: %d nm)"
msgstr "(세그먼트의 길이가 0이거나 매우 작음: %d nm)"

#: pcbnew/convert_shape_list_to_polygon.cpp:712
#, c-format
msgid "(Arc has null or very small size: %d nm)"
msgstr "(호의 크기가 0이거나 매우 작음: %d nm)"

#: pcbnew/cross-probing.cpp:105 pcbnew/dialogs/dialog_board_setup.cpp:193
#: pcbnew/dialogs/dialog_drc.cpp:242 pcbnew/pcb_edit_frame.cpp:2399
msgid "Custom Rules"
msgstr "사용자 정의 규칙"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:87
msgid "Only front"
msgstr "오직 전면"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:88
msgid "Only back"
msgstr "오직 후면"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:89
msgid "Only selected"
msgstr "선택한것만"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:95
msgid "Empty"
msgstr "비어있음"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:96
msgid "Invalid"
msgstr "유효하지 않음"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:97
msgid "Excluded"
msgstr "제외"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:122
msgid "Reannotate PCB"
msgstr "PCB에 다시 주석 처리"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:301
msgid "No PCB to reannotate!"
msgstr "주석을 추가할 PCB가 없습니다!"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:313
msgid "PCB successfully reannotated"
msgstr "PCB가 성공적으로 다시 주석 처리되었습니다"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:314
msgid ""
"PCB annotation changes should be synchronized with schematic using the "
"\"Update Schematic from PCB\" tool."
msgstr ""
"PCB 주석 변경은 \"PCB에서 회로도 업데이트\" 도구를 사용하여 회로도와 동기화해"
"야 합니다."

#: pcbnew/dialogs/dialog_board_reannotate.cpp:327
#, c-format
msgid ""
"\n"
"%s footprints will be reannotated."
msgstr ""
"\n"
"%s 풋프린트를 다시 주석 처리합니다."

#: pcbnew/dialogs/dialog_board_reannotate.cpp:332
#, c-format
msgid ""
"\n"
"Any reference types %s will not be annotated."
msgstr ""
"\n"
"참조 유형 %s은(는) 주석 처리되지 않습니다."

#: pcbnew/dialogs/dialog_board_reannotate.cpp:337
msgid ""
"\n"
"Locked footprints will not be annotated"
msgstr ""
"\n"
"잠긴 풋프린트에는 다시 주석 처리되지 않습니다"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:341
#, c-format
msgid ""
"\n"
"Front footprints will start at %s"
msgstr ""
"\n"
"전면 풋프린트는 %s에서 시작됩니다"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:350
#, c-format
msgid ""
"\n"
"Back footprints will start at %s."
msgstr ""
"\n"
"후면의 풋프린트는 %s에서 시작합니다."

#: pcbnew/dialogs/dialog_board_reannotate.cpp:351
msgid "the last front footprint + 1"
msgstr "전면의 마지막 풋프린트 + 1"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:359
#, c-format
msgid ""
"\n"
"Front footprints starting with '%s' will have the prefix removed."
msgstr ""
"\n"
"'%s'(으)로 시작하는 전면 풋프린트는 접두사가 제거됩니다."

#: pcbnew/dialogs/dialog_board_reannotate.cpp:365
#, c-format
msgid ""
"\n"
"Front footprints will have '%s' inserted as a prefix."
msgstr ""
"\n"
"전면 풋프린트에는 '%s'이(가) 접두사로 삽입됩니다."

#: pcbnew/dialogs/dialog_board_reannotate.cpp:375
#, c-format
msgid ""
"\n"
"Back footprints starting with '%s' will have the prefix removed."
msgstr ""
"\n"
"'%s'(으)로 시작하는 후면 풋프린트는 접두사가 제거됩니다."

#: pcbnew/dialogs/dialog_board_reannotate.cpp:381
#, c-format
msgid ""
"\n"
"Back footprints will have '%s' inserted as a prefix."
msgstr ""
"\n"
"후면 풋프린트에는 접두사로 '%s'이(가) 삽입됩니다."

#: pcbnew/dialogs/dialog_board_reannotate.cpp:389
#, c-format
msgid ""
"\n"
"Prior to sorting by %s, the coordinates of which will be rounded to a %s, %s "
"grid."
msgstr ""
"\n"
"%s(으)로 정렬하기 전에, 좌표가 %s, %s의 그리드로 반올림합니다."

#: pcbnew/dialogs/dialog_board_reannotate.cpp:391
msgid "footprint location"
msgstr "풋프린트 위치"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:392
msgid "reference designator location"
msgstr "참조 지정자의 위치"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:524
#, c-format
msgid ""
"\n"
"\n"
"There are %i types of reference designations\n"
"**********************************************************\n"
msgstr ""
"\n"
"\n"
"참조 지정 유형이 %i개 있습니다.\n"
"**********************************************************\n"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:538
#, c-format
msgid ""
"\n"
"Excluding: %s from reannotation\n"
"\n"
msgstr ""
"\n"
"재 주석에서 제외 : %s\n"
"\n"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:541
msgid ""
"\n"
"    Change Array\n"
"***********************\n"
msgstr ""
"\n"
"    배열 변경\n"
"***********************\n"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:549
msgid " will be ignored"
msgstr " 무시됩니다"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:563
msgid ""
"\n"
"No footprints"
msgstr ""
"\n"
"풋프린트 없음"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:569
#, c-format
msgid ""
"\n"
"*********** Sort on %s ***********"
msgstr ""
"\n"
"*********** %s에서 정렬 ***********"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:570
msgid "Footprint Coordinates"
msgstr "풋프린트 좌표"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:571
msgid "Reference Designator Coordinates"
msgstr "참조 지정자의 좌표"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:573
#, c-format
msgid ""
"\n"
"Sort Code %d"
msgstr ""
"\n"
"정렬 코드 %d"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:577
#, c-format
msgid ""
"\n"
"%d %s UUID: [%s], X, Y: %s, Rounded X, Y, %s"
msgstr ""
"\n"
"%d %s UUID: [%s], X, Y: %s, 반올림된 X, Y, %s"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:600
msgid "Selected options resulted in errors! Change them and try again."
msgstr "선택한 옵션에 오류가 발생했습니다! 변경하고 다시 시도하십시오."

#: pcbnew/dialogs/dialog_board_reannotate.cpp:607
#, c-format
msgid ""
"\n"
"PCB has %d empty or invalid reference designations.\n"
"Recommend running DRC with 'Test for parity between PCB and schematic' "
"checked.\n"
msgstr ""
"\n"
"PCB에 %d가 비어 있거나 잘못된 참조 지정이 있습니다.\n"
"'회로도에 대한 풋프린트 테스트'를 선택하고 DRC를 실행하는 것을 권장합니다.\n"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:614
#, c-format
msgid ""
"\n"
"RefDes: %s Footprint: %s:%s at %s on PCB."
msgstr ""
"\n"
"참조 지정자: %s 풋프린트: %s:%s이(가) PCB의 %s에 있음."

#: pcbnew/dialogs/dialog_board_reannotate.cpp:622
msgid "Reannotate anyway?"
msgstr "다시 주석을 달까요?"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:804
#, c-format
msgid "Duplicate instances of %s"
msgstr "중복된 항목 %s"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:810
msgid "Aborted: too many errors"
msgstr "중단됨: 오류가 너무 많음"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:864
msgid ""
"\n"
"\n"
"Front Footprints"
msgstr ""
"\n"
"\n"
"전면의 풋프린트"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:865
msgid ""
"\n"
"\n"
"Back Footprints"
msgstr ""
"\n"
"\n"
"후면 풋프린트"

#: pcbnew/dialogs/dialog_board_reannotate.cpp:930
msgid "Footprint not found in changelist"
msgstr "변경 목록에서 풋프린트를 찾을 수 없음"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:30
msgid "Footprint Order"
msgstr "풋프린트 순서"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:50
msgid "Horizontally: top left to bottom right"
msgstr "수평으로: 왼쪽 상단에서 오른쪽 하단"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:61
msgid "Horizontally: top right to bottom left"
msgstr "수평으로: 오른쪽 상단에서 왼쪽 하단"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:72
msgid "Horizontally: bottom left to top right"
msgstr "수평으로: 왼쪽 하단에서 오른쪽 상단"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:83
msgid "Horizontally:: bottom right to top left"
msgstr "수평으로:: 오른쪽 하단에서 왼쪽 상단"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:91
msgid "Vertically: top left to bottom right"
msgstr "수직으로: 왼쪽 상단에서 오른쪽 하단"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:102
msgid "Vertically: bottom left to top right"
msgstr "수직으로: 왼쪽 하단에서 오른쪽 상단"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:113
msgid "Vertically: top right to bottom left"
msgstr "수직으로: 오른쪽 상단에서 왼쪽 하단"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:124
msgid "Vertically: bottom right to top left"
msgstr "수직으로: 오른쪽 하단에서 왼쪽 상단"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:137
msgid "Based on location of:"
msgstr "위치의 기준:"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:141
msgid "Reference Designator"
msgstr "참조 지정자"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:147
msgid "Round locations to:"
msgstr "위치 반올림하여 정렬:"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:149
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:156
msgid ""
"Component position will be rounded\n"
"to this grid before sorting.\n"
"This helps with misaligned parts."
msgstr ""
"컴포넌트의 위치는 그리드에 대하여\n"
"정렬 전에 반올림됩니다.\n"
"이것은 부품이 잘못 정렬되었을 시에 도움이 됩니다."

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:168
msgid "Reannotation Scope"
msgstr "재주석 범위"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:184
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:155
#: pcbnew/footprint.cpp:1295
msgid "Front"
msgstr "전면"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:187
#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:155
#: pcbnew/dialogs/panel_setup_layers_base.cpp:569
msgid "Back"
msgstr "후면"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:211
msgid "Front reference start:"
msgstr "전면 참조 시작:"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:213
msgid "Starting reference designation for front."
msgstr "전면에 대한 참조 지정 시작."

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:217
#: pcbnew/dialogs/dialog_create_array_base.cpp:152
#: pcbnew/dialogs/dialog_create_array_base.cpp:231
#: pcbnew/dialogs/dialog_create_array_base.cpp:236
#: pcbnew/dialogs/dialog_create_array_base.cpp:245
#: pcbnew/dialogs/dialog_create_array_base.cpp:250
#: pcbnew/dialogs/dialog_create_array_base.cpp:503
#: pcbnew/dialogs/dialog_create_array_base.cpp:510
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:46
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:111
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:177
msgid "1"
msgstr "1"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:218
msgid "Default is 1"
msgstr "기본값은 1입니다"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:223
msgid "Back reference start:"
msgstr "후면 참조 시작:"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:225
msgid ""
"Blank continues from front or enter a number greater than the highest "
"reference designation on the front."
msgstr ""
"공백으로 비워둠으로써 전면의 값을 계속 사용하거나, 전면의 가장 큰 참조 지정자"
"보다 큰 값을 입력하세요."

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:230
msgid ""
"Leave blank or zero, or enter a number greater than the highest reference "
"designation on the front."
msgstr ""
"공백 또는 0으로 남겨 놓거나, 전면의 가장 큰 참조 지정자보다 큰 값을 입력하세"
"요."

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:235
msgid "Remove front prefix"
msgstr "전면 접두사를 삭제"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:236
msgid ""
"If checked will remove the front side prefix\n"
"in the front prefix box if present"
msgstr ""
"체크할 경우, 전면 접두사 박스에 값이 존재할 때\n"
"전면 접두사를 삭제합니다"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:240
msgid "Remove back prefix"
msgstr "후면 접두사 삭제"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:241
msgid ""
"If checked will remove the Back side prefix\n"
"in the back prefix box if present"
msgstr ""
"체크할 경우, 후면 접두사 박스에 값이 존재할 때\n"
"후면 접두사를 삭제합니다"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:245
msgid "Front prefix:"
msgstr "전면 접두사:"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:247
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:252
msgid "Optional prefix for component side reference designations (e.g. F_)"
msgstr "구성 요소 측면 참조 지정을 위한 옵션 접두사 (예: F_)"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:256
msgid "Back prefix:"
msgstr "후면 접두사:"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:258
#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:263
msgid "Optional prefix for solder side reference designations (e.g. B_)"
msgstr "납땜면의 참조 지정자에 대한 선택적 접두사 (예: B_)"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:267
msgid "Exclude locked footprints"
msgstr "잠긴 풋프린트 제외"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:268
msgid "Locked footprints will not be reannotated"
msgstr "잠긴 풋프린트는 다시 주석 처리되지 않습니다"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:272
msgid "Exclude references:"
msgstr "참조 제외:"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:274
msgid ""
"Do not re-annotate this type \n"
"of reference (R means R*)"
msgstr ""
"이 유형의 참조에 다시 주석을 달지 마십시오.\n"
"(R은 R*을 의미함)"

#: pcbnew/dialogs/dialog_board_reannotate_base.cpp:293
msgid "Reference Designators"
msgstr "참조 지정자"

#: pcbnew/dialogs/dialog_board_reannotate_base.h:107
msgid "Geographical Reannotation"
msgstr "지리적 재주석"

#: pcbnew/dialogs/dialog_board_setup.cpp:56
msgid "Board Setup"
msgstr "기판 설정"

#: pcbnew/dialogs/dialog_board_setup.cpp:57
msgid "Import Settings from Another Board..."
msgstr "다른 기판에서 설정 가져오기..."

#: pcbnew/dialogs/dialog_board_setup.cpp:83
msgid "Board Stackup"
msgstr "보드 스택업"

#: pcbnew/dialogs/dialog_board_setup.cpp:96
msgid "Board Editor Layers"
msgstr "기판 편집기 레이어"

#: pcbnew/dialogs/dialog_board_setup.cpp:104
msgid "Physical Stackup"
msgstr "물리적 스택업"

#: pcbnew/dialogs/dialog_board_setup.cpp:111
msgid "Board Finish"
msgstr "보드 마감"

#: pcbnew/dialogs/dialog_board_setup.cpp:118
#: pcbnew/dialogs/dialog_plot.cpp:1298
msgid "Solder Mask/Paste"
msgstr "솔더 마스크/페이스트"

#: pcbnew/dialogs/dialog_board_setup.cpp:120
msgid "Text & Graphics"
msgstr "텍스트와 그래픽"

#: pcbnew/dialogs/dialog_board_setup.cpp:127
msgid "Defaults"
msgstr "기본값"

#: pcbnew/dialogs/dialog_board_setup.cpp:142
msgid "Design Rules"
msgstr "디자인 규칙"

#: pcbnew/dialogs/dialog_board_setup.cpp:149
msgid "Constraints"
msgstr "제약"

#: pcbnew/dialogs/dialog_board_setup.cpp:156 pcbnew/edit_track_width.cpp:180
#: pcbnew/edit_track_width.cpp:204
msgid "Pre-defined Sizes"
msgstr "사전 정의된 크기"

#: pcbnew/dialogs/dialog_board_setup.cpp:175
msgid "Length-tuning Patterns"
msgstr "길이 조정 패턴"

#: pcbnew/dialogs/dialog_board_setup.cpp:213
msgid "Project is missing or read-only. Some settings will not be editable."
msgstr ""
"프로젝트를 찾을 수 없거나 읽기 전용입니다. 몇몇 설정은 수정할 수 없습니다."

#: pcbnew/dialogs/dialog_board_setup.cpp:270
#, c-format
msgid ""
"Error importing settings from board:\n"
"Associated project file %s could not be loaded"
msgstr ""
"보드에서 설정 가져오기 오류:\n"
"연결된 프로젝트 파일 %s을(를) 불러올 수 없습니다"

#: pcbnew/dialogs/dialog_board_setup.cpp:292 pcbnew/files.cpp:564
#: pcbnew/tools/pcb_control.cpp:1312
msgid "Loading PCB"
msgstr "PCB를 불러오는 중입니다"

#: pcbnew/dialogs/dialog_board_setup.cpp:315
#, c-format
msgid ""
"Error loading board file:\n"
"%s"
msgstr ""
"보드 파일 불러오기 오류:\n"
"%s"

#: pcbnew/dialogs/dialog_board_statistics.cpp:96
#: pcbnew/dialogs/dialog_board_statistics.cpp:706
msgid "Front Side"
msgstr "전면"

#: pcbnew/dialogs/dialog_board_statistics.cpp:98
#: pcbnew/dialogs/dialog_board_statistics.cpp:706
msgid "Back Side"
msgstr "후면"

#: pcbnew/dialogs/dialog_board_statistics.cpp:100
#: pcbnew/dialogs/dialog_board_statistics.cpp:706
msgid "Total"
msgstr "합계"

#: pcbnew/dialogs/dialog_board_statistics.cpp:145
msgid "THT:"
msgstr "THT:"

#: pcbnew/dialogs/dialog_board_statistics.cpp:146
#: pcbnew/dialogs/dialog_board_statistics.cpp:151
msgid "SMD:"
msgstr "SMD:"

#: pcbnew/dialogs/dialog_board_statistics.cpp:147
msgid "Unspecified:"
msgstr "지정되지 않음:"

#: pcbnew/dialogs/dialog_board_statistics.cpp:150
msgid "Through hole:"
msgstr "스루홀:"

#: pcbnew/dialogs/dialog_board_statistics.cpp:152
msgid "Connector:"
msgstr "연결선:"

#: pcbnew/dialogs/dialog_board_statistics.cpp:153
msgid "NPTH:"
msgstr "NPTH:"

#: pcbnew/dialogs/dialog_board_statistics.cpp:156
#: pcbnew/dialogs/dialog_gendrill_base.cpp:167
msgid "Through vias:"
msgstr "관통 비아:"

#: pcbnew/dialogs/dialog_board_statistics.cpp:157
msgid "Blind/buried:"
msgstr "매립/매장:"

#: pcbnew/dialogs/dialog_board_statistics.cpp:158
#: pcbnew/dialogs/dialog_gendrill_base.cpp:175
msgid "Micro vias:"
msgstr "마이크로 비아:"

#: pcbnew/dialogs/dialog_board_statistics.cpp:401
#: pcbnew/dialogs/dialog_board_statistics.cpp:415
#: pcbnew/dialogs/dialog_board_statistics.cpp:436
msgid "Total:"
msgstr "합계:"

#: pcbnew/dialogs/dialog_board_statistics.cpp:482
msgid "Round"
msgstr "둥근"

#: pcbnew/dialogs/dialog_board_statistics.cpp:483
msgid "Slot"
msgstr "슬롯"

#: pcbnew/dialogs/dialog_board_statistics.cpp:484
msgid "???"
msgstr "???"

#: pcbnew/dialogs/dialog_board_statistics.cpp:488
#: pcbnew/dialogs/dialog_board_statistics.cpp:493
#: pcbnew/dialogs/dialog_export_2581.cpp:153
#: pcbnew/dialogs/dialog_export_2581.cpp:160
#: pcbnew/dialogs/dialog_export_2581.cpp:278
#: pcbnew/dialogs/dialog_export_2581.h:93
#: pcbnew/dialogs/dialog_export_2581_base.cpp:133
#: pcbnew/dialogs/dialog_export_2581_base.cpp:157
msgid "N/A"
msgstr "N/A"

#: pcbnew/dialogs/dialog_board_statistics.cpp:504 pcbnew/pad.cpp:1247
msgid "PTH"
msgstr "PTH"

#: pcbnew/dialogs/dialog_board_statistics.cpp:504 pcbnew/pad.cpp:1250
msgid "NPTH"
msgstr "NPTH"

#: pcbnew/dialogs/dialog_board_statistics.cpp:666
msgid ""
"PCB statistics report\n"
"====================="
msgstr ""
"PCB 통계 보고서\n"
"======================="

#: pcbnew/dialogs/dialog_board_statistics.cpp:667
msgid "Date"
msgstr "날짜"

#: pcbnew/dialogs/dialog_board_statistics.cpp:669
msgid "Board name"
msgstr "보드 이름"

#: pcbnew/dialogs/dialog_board_statistics.cpp:680
#: pcbnew/dialogs/dialog_board_statistics.cpp:688
msgid "Area"
msgstr "지역"

#: pcbnew/dialogs/dialog_board_statistics.cpp:735
#: pcbnew/dialogs/dialog_board_statistics_base.cpp:39
msgid "Components"
msgstr "부품"

#: pcbnew/dialogs/dialog_board_statistics.cpp:741
msgid "Drill holes"
msgstr "드릴 홀"

#: pcbnew/dialogs/dialog_board_statistics.cpp:748
#, c-format
msgid "Error writing file '%s'."
msgstr "파일 쓰기 오류 '%s'."

#: pcbnew/dialogs/dialog_board_statistics_base.cpp:117
msgid "Board Size"
msgstr "보드 크기"

#: pcbnew/dialogs/dialog_board_statistics_base.cpp:196
msgid "Subtract holes from board area"
msgstr "기판 영역에서 홀 부분들을 뺍니다"

#: pcbnew/dialogs/dialog_board_statistics_base.cpp:199
msgid "Exclude footprints with no pads"
msgstr "패드가 없는 풋프린트 제외"

#: pcbnew/dialogs/dialog_board_statistics_base.cpp:229
msgid "X Size"
msgstr "X 크기"

#: pcbnew/dialogs/dialog_board_statistics_base.cpp:230
msgid "Y Size"
msgstr "Y 크기"

#: pcbnew/dialogs/dialog_board_statistics_base.cpp:231
msgid "Plated"
msgstr "도금"

#: pcbnew/dialogs/dialog_board_statistics_base.cpp:232
msgid "Via/Pad"
msgstr "비아/패드"

#: pcbnew/dialogs/dialog_board_statistics_base.cpp:233
msgid "Start Layer"
msgstr "시작 레이어"

#: pcbnew/dialogs/dialog_board_statistics_base.cpp:234
msgid "Stop Layer"
msgstr "종료 레이어"

#: pcbnew/dialogs/dialog_board_statistics_base.cpp:253
msgid "Drill Holes"
msgstr "드릴 홀"

#: pcbnew/dialogs/dialog_board_statistics_base.cpp:260
#: pcbnew/dialogs/dialog_gendrill_base.cpp:216
msgid "Generate Report File..."
msgstr "보고서 파일 생성..."

#: pcbnew/dialogs/dialog_board_statistics_base.h:68
msgid "Board Statistics"
msgstr "보드 통계"

#: pcbnew/dialogs/dialog_cleanup_graphics.cpp:48
#: pcbnew/footprint_libraries_utils.cpp:929
msgid "Update Footprint"
msgstr "풋프린트 업데이트"

#: pcbnew/dialogs/dialog_cleanup_graphics.cpp:56
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias.cpp:92
#: pcbnew/dialogs/dialog_import_netlist.cpp:83
#: pcbnew/dialogs/dialog_update_pcb.cpp:59
msgid "Update PCB"
msgstr "PCB 업데이트"

#: pcbnew/dialogs/dialog_cleanup_graphics.cpp:134
msgid "Graphics cleanup"
msgstr "그래픽 정리"

#: pcbnew/dialogs/dialog_cleanup_graphics_base.cpp:22
msgid "Merge lines into rectangles"
msgstr "선을 직사각형에 병합"

#: pcbnew/dialogs/dialog_cleanup_graphics_base.cpp:25
msgid "Delete redundant graphics"
msgstr "중복 그래픽 삭제"

#: pcbnew/dialogs/dialog_cleanup_graphics_base.cpp:28
msgid "Merge overlapping graphics into pads"
msgstr "겹치는 그래픽을 패드에 병합"

#: pcbnew/dialogs/dialog_cleanup_graphics_base.cpp:34
msgid ""
"(Pads which appear in a Net Tie pad group will not be considered for "
"merging.)"
msgstr "(Net Tie 패드 그룹에 나타나는 패드는 병합 대상에서 제외됩니다.)"

#: pcbnew/dialogs/dialog_cleanup_graphics_base.cpp:41
msgid "Fix discontinuities in board outlines"
msgstr "보드 윤곽선의 불연속성 수정"

#: pcbnew/dialogs/dialog_cleanup_graphics_base.cpp:46
#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:178
msgid "Tolerance:"
msgstr "허용오차:"

#: pcbnew/dialogs/dialog_cleanup_graphics_base.cpp:67
#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:72
msgid "Changes to be applied:"
msgstr "적용할 변경 사항:"

#: pcbnew/dialogs/dialog_cleanup_graphics_base.h:61
msgid "Cleanup Graphics"
msgstr "그래픽 정리"

#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias.cpp:90
msgid "Build Changes"
msgstr "변경 사항"

#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias.cpp:142
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:187
msgid "Checking zones..."
msgstr "영역 확인 중..."

#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias.cpp:150
msgid "Rebuilding connectivity..."
msgstr "연결 재구축 중..."

#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias.cpp:170
msgid "Board cleanup"
msgstr "보드 정리"

#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:25
msgid "Delete &tracks connecting different nets"
msgstr "다른 네트를 연결하는 배선 삭제 (&t)"

#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:26
msgid ""
"remove track segments connecting nodes belonging to different nets (short "
"circuit)"
msgstr "다른 네트에 속한 노드에 연결되는 배선 세그먼트 (회로의 단락) 를 삭제"

#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:30
msgid "&Delete redundant vias"
msgstr "중복 비아 삭제 (&d)"

#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:31
msgid "remove vias on through hole pads and superimposed vias"
msgstr "스루홀 패드와 겹쳐진 비아에서의 비아 삭제"

#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:35
msgid "Delete vias connected on only one layer"
msgstr "하나의 레이어에만 연결된 비아 삭제"

#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:38
msgid "&Merge co-linear tracks"
msgstr "동일선상의 배선 병합 (&M)"

#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:39
msgid "merge aligned track segments, and remove null segments"
msgstr "할당된 배션 세그먼트를 병합하고, 빈 세그먼트 제거"

#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:43
msgid "Delete tracks unconnected at one end"
msgstr "한쪽 끝이 연결되지 않은 배선 삭제"

#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:44
msgid "delete tracks having at least one dangling end"
msgstr "끝이 연결없이 매달린 배선이 하나 이상 있을 경우 삭제"

#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:48
msgid "Delete tracks fully inside pads"
msgstr "패드 내부의 배선 삭제"

#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.cpp:49
msgid "Delete tracks that have both start and end positions inside of a pad"
msgstr "패드 내부에 시작점과 끝점이 모두 있는 배선 삭제"

#: pcbnew/dialogs/dialog_cleanup_tracks_and_vias_base.h:60
msgid "Cleanup Tracks and Vias"
msgstr "배선 및 비아 정리"

#: pcbnew/dialogs/dialog_copper_zones.cpp:202
msgid "Teardrop on Vias/Pads Properties"
msgstr "비아/패드 속성의 눈물방울"

#: pcbnew/dialogs/dialog_copper_zones.cpp:206
msgid "Teardrop on Tracks Properties"
msgstr "트랙 속성의 눈물 방울"

#: pcbnew/dialogs/dialog_copper_zones.cpp:210
msgid "Teardrop Properties"
msgstr "눈물 방울 속성"

#: pcbnew/dialogs/dialog_copper_zones.cpp:216
#: pcbnew/dialogs/dialog_non_copper_zones_properties.cpp:106
#: pcbnew/dialogs/dialog_rule_area_properties.cpp:97
#: pcbnew/tools/convert_tool.cpp:62
msgid "Conversion Settings"
msgstr "변환 설정"

#: pcbnew/dialogs/dialog_copper_zones.cpp:219
#: pcbnew/dialogs/dialog_non_copper_zones_properties.cpp:109
#: pcbnew/dialogs/dialog_rule_area_properties.cpp:100
#: pcbnew/tools/convert_tool.cpp:84
msgid "Use centerlines"
msgstr "중심선 사용"

#: pcbnew/dialogs/dialog_copper_zones.cpp:223
#: pcbnew/dialogs/dialog_non_copper_zones_properties.cpp:113
#: pcbnew/dialogs/dialog_rule_area_properties.cpp:104
#: pcbnew/tools/convert_tool.cpp:96
msgid "Create bounding hull"
msgstr "경계 선체 만들기"

#: pcbnew/dialogs/dialog_copper_zones.cpp:227
#: pcbnew/dialogs/dialog_non_copper_zones_properties.cpp:118
#: pcbnew/dialogs/dialog_rule_area_properties.cpp:109
#: pcbnew/tools/convert_tool.cpp:134
msgid "Delete source objects after conversion"
msgstr "변환 후 소스 개체 삭제"

#: pcbnew/dialogs/dialog_copper_zones.cpp:236
msgid "Convert to Copper Zone"
msgstr "구리 영역으로 변환"

#: pcbnew/dialogs/dialog_copper_zones.cpp:401
#: pcbnew/dialogs/dialog_copper_zones_base.cpp:164
#: pcbnew/dialogs/dialog_non_copper_zones_properties.cpp:149
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:97
msgid "Chamfer distance:"
msgstr "모따기 거리:"

#: pcbnew/dialogs/dialog_copper_zones.cpp:403
#: pcbnew/dialogs/dialog_non_copper_zones_properties.cpp:151
msgid "Fillet radius:"
msgstr "모깍기 반경:"

#: pcbnew/dialogs/dialog_copper_zones.cpp:544
msgid "Thermal spoke width cannot be smaller than the minimum width."
msgstr "단열 살 너비는 최소 너비보다 작을 수 없습니다."

#: pcbnew/dialogs/dialog_copper_zones.cpp:564
#: pcbnew/dialogs/dialog_non_copper_zones_properties.cpp:326
msgid "No layer selected."
msgstr "선택한 레이어가 없습니다."

#: pcbnew/dialogs/dialog_copper_zones.cpp:819
msgid "<no net> will result in an isolated copper island."
msgstr "<no net>은 고립된 구리 영역을 생성합니다."

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:48
msgid ""
"Pattern to filter net names in filtered list.\n"
"Only net names matching this pattern are displayed."
msgstr ""
"리스트에서의 네트 이름을 필터링하기 위한 패턴.\n"
"이 패턴에 일치하는 네트 이름만이 표시됩니다."

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:55
msgid "Hide automatically generated net names"
msgstr "자동 생성된 네트 이름 숨기기"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:62
msgid "Sort nets by pad count"
msgstr "패드 수로 네트 정렬"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:95
msgid "Zone name:"
msgstr "영역 이름:"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:97
msgid "A unique name for this zone to identify it for DRC"
msgstr "DRC에서 식별하기 위한 이 영역의 고유 이름"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:104
msgid "Zone priority level:"
msgstr "정의된 영역 우선도:"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:106
msgid ""
"Zones are filled by priority level, level 3 has higher priority than level "
"2.\n"
"When a zone is inside another zone:\n"
"* If its priority is higher, its outlines are removed from the other zone.\n"
"* If its priority is equal, a DRC error is set."
msgstr ""
"영역들은 우선 순위에 따라 채워집니다, 레벨 3은 레벨 2보다 우선 순위가 높습니"
"다.\n"
"한 영역이 다른 영역 안에 있을 경우:\n"
"* 우선 순위가 높은 경우: 외곽선이 다른 영역에서 제거됩니다.\n"
"* 우선 순위가 동일한 경우: DRC 오류가 설정됩니다."

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:130
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:116
msgid "Outline display:"
msgstr "외곽선 표시:"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:134
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:59
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:120 pcbnew/zone.cpp:630
msgid "Hatched"
msgstr "해치됨"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:134
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:59
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:120
msgid "Fully hatched"
msgstr "완전히 해치됨"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:140
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:65
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:126
msgid "Outline hatch pitch:"
msgstr "윤곽선 해치 피치:"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:154
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:87
msgid "Corner smoothing:"
msgstr "모서리 다듬기:"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:158
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:91
#: pcbnew/dialogs/dialog_tuning_pattern_properties_base.cpp:88
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:113
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:242
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:371
msgid "Chamfer"
msgstr "모따기"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:158
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:91
#: pcbnew/dialogs/dialog_tuning_pattern_properties_base.cpp:88
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:113
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:242
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:371
msgid "Fillet"
msgstr "모깍기"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:190
msgid "Electrical Properties"
msgstr "전기적 속성"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:199
msgid "Copper clearance for this zone (set to 0 to use the netclass clearance)"
msgstr ""
"해당 영역에 대한 구리 클리어런스 (0으로 설정하면 네트클래스 클리어런스를 그대"
"로 사용합니다)"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:210
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:76
msgid "Minimum width:"
msgstr "최소 폭:"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:212
msgid "Minimum thickness of filled areas."
msgstr "채워진 영역의 최소 두께."

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:226
msgid "Pad connections:"
msgstr "패드 연결:"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:228
msgid ""
"Default pad connection type to zone.\n"
"This setting can be overridden by local  pad settings"
msgstr ""
"영역과의 패드 연결 유형 기본값입니다.\n"
"이 설정은 지역 패드 설정에 의해 재정의될 수 있습니다"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:232 pcbnew/footprint.cpp:3457
#: pcbnew/pad.cpp:1908 pcbnew/zone.cpp:1550
msgid "Thermal reliefs"
msgstr "단열판"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:232
msgid "Reliefs for PTH"
msgstr "PTH를 릴리프"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:238
msgid "Thermal relief gap:"
msgstr "단열판 간격:"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:240
msgid ""
"The distance that will be kept clear between the filled area of the zone and "
"a pad connected by thermal relief spokes."
msgstr "특정 영역의 채워진 영역과 단열판의 스포크에 연결된 패드 간 공백 간격."

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:245
msgid "Clearance between pads in the same net and filled areas."
msgstr "같은 네트와 채워진 영역에 존재하는 패드 사이의 클리어런스."

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:253
msgid "Thermal spoke width:"
msgstr "서멀 스포크 폭:"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:258
msgid "Width of copper in thermal reliefs."
msgstr "단열판의 구리 너비."

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:286
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:125
msgid "Fill type:"
msgstr "채우기 유형:"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:290
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:129
#: pcbnew/zone.cpp:1560
msgid "Solid fill"
msgstr "단색 채우기"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:290
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:129
#: pcbnew/zone.cpp:1561
msgid "Hatch pattern"
msgstr "해치 패턴"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:307
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:149
msgid "Hatch width:"
msgstr "해치 너비:"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:318
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:160
msgid "Hatch gap:"
msgstr "해치 간격:"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:329
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:171
msgid "Smoothing effort:"
msgstr "다듬기 작업:"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:331
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:173
msgid ""
"Value of smoothing effort\n"
"0 = no smoothing\n"
"1 = chamfer\n"
"2 = round corners\n"
"3 = round corners (finer shape)"
msgstr ""
"다듬기 작업의 설정값\n"
"0 = 다듬기 없음\n"
"1 = 모따기\n"
"2 = 모깍기\n"
"3 = 모깍기 (미세한 형상)"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:338
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:183
msgid "Smoothing amount:"
msgstr "다듬기 양:"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:340
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:185
msgid ""
"Ratio between smoothed corners size and the gap between lines\n"
"0 = no smoothing\n"
"1.0 = max radius/chamfer size (half gap value)"
msgstr ""
"다듬기 모서리 크기와 선 사이의 간격의 비율\n"
"0 = 다듬기 없음\n"
"1.0 = 최대 반경 / 모따기 크기 (갭의 절반값)"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:351
msgid "Remove islands:"
msgstr "고립된 영역 제거:"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:353
msgid "Choose what to do with unconnected copper islands"
msgstr "연결되지 않은 고립 영역으로 할 일을 선택"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:357 pcbnew/zone.cpp:1571
msgid "Below area limit"
msgstr "영역 제한 이하"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:363
msgid "Minimum island size:"
msgstr "고립된 영역 최소 크기:"

#: pcbnew/dialogs/dialog_copper_zones_base.cpp:366
msgid "Isolated islands smaller than this will be removed"
msgstr "이 값보다 작은 고립 영역은 삭제됩니다"

#: pcbnew/dialogs/dialog_copper_zones_base.h:135
msgid "Copper Zone Properties"
msgstr "구리 영역 속성"

#: pcbnew/dialogs/dialog_create_array.cpp:133
msgid "Numerals (0,1,2,...,9,10)"
msgstr "10진수 (0,1,2,...,9,10)"

#: pcbnew/dialogs/dialog_create_array.cpp:137
msgid "Hexadecimal (0,1,...,F,10,...)"
msgstr "16진수 (0,1,...,F,10,...)"

#: pcbnew/dialogs/dialog_create_array.cpp:141
msgid "Alphabet, minus IOSQXZ"
msgstr "IOSQXZ을 제외한 알파벳"

#: pcbnew/dialogs/dialog_create_array.cpp:145
msgid "Alphabet, full 26 characters"
msgstr "알파벳 26글자 전부"

#: pcbnew/dialogs/dialog_create_array.cpp:321
#, c-format
msgid "Bad numeric value for %s: %s"
msgstr "%s에 대한 부적절한 십진수 값: %s"

#: pcbnew/dialogs/dialog_create_array.cpp:357
#, c-format
msgid ""
"Could not determine numbering start from '%s': expected value consistent "
"with alphabet '%s'."
msgstr ""
"'%s'에서 번호 매기기 시작점을 결정할 수 없습니다. 예상 값은 알파벳 '%s'와 일"
"치해야 합니다."

#: pcbnew/dialogs/dialog_create_array.cpp:365
msgid "step value"
msgstr "단계 값"

#: pcbnew/dialogs/dialog_create_array.cpp:387
msgid "horizontal count"
msgstr "수평 개수"

#: pcbnew/dialogs/dialog_create_array.cpp:388
msgid "vertical count"
msgstr "수직값"

#: pcbnew/dialogs/dialog_create_array.cpp:396
msgid "stagger"
msgstr "스태거"

#: pcbnew/dialogs/dialog_create_array.cpp:452
msgid "point count"
msgstr "포인트 수"

#: pcbnew/dialogs/dialog_create_array.cpp:497
msgid "Bad parameters"
msgstr "부적절한 매개변수"

#: pcbnew/dialogs/dialog_create_array_base.cpp:33
msgid "Grid Array Size"
msgstr "그리드 배열 크기"

#: pcbnew/dialogs/dialog_create_array_base.cpp:40
msgid "Horizontal count:"
msgstr "수평 개수:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:47
msgid "Vertical count:"
msgstr "수직 개수:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:61
msgid "Items Spacing"
msgstr "항목 간격"

#: pcbnew/dialogs/dialog_create_array_base.cpp:68
msgid "Horizontal spacing:"
msgstr "수평 간격:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:70
msgid "Distance between columns"
msgstr "열 간 거리"

#: pcbnew/dialogs/dialog_create_array_base.cpp:81
msgid "Vertical spacing:"
msgstr "수직 간격:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:83
msgid "Distance between rows"
msgstr "행 간 거리"

#: pcbnew/dialogs/dialog_create_array_base.cpp:98
msgid "Grid Spacing Modifiers"
msgstr "그리드 간격 조절기"

#: pcbnew/dialogs/dialog_create_array_base.cpp:105
msgid "Horizontal offset:"
msgstr "수평 오프셋:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:107
msgid "Offset added to the next row position."
msgstr "다음 행 위치에 오프셋이 추가되었습니다."

#: pcbnew/dialogs/dialog_create_array_base.cpp:118
msgid "Vertical offset:"
msgstr "수직 오프셋:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:120
msgid "Offset added to the next column position"
msgstr "다음 열 위치에 오프셋이 추가됨"

#: pcbnew/dialogs/dialog_create_array_base.cpp:141
msgid "Stagger Settings"
msgstr "시차 설정"

#: pcbnew/dialogs/dialog_create_array_base.cpp:146
msgid "Stagger:"
msgstr "스태거:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:148
msgid "Value -1,  0 or 1 disable this option."
msgstr "-1, 0 또는 1 값을 입력하면 이 옵션이 비활성화됨."

#: pcbnew/dialogs/dialog_create_array_base.cpp:158
msgid "Rows"
msgstr "행"

#: pcbnew/dialogs/dialog_create_array_base.cpp:158
msgid "Columns"
msgstr "열"

#: pcbnew/dialogs/dialog_create_array_base.cpp:160
msgid "Stagger Type"
msgstr "스태거 타입"

#: pcbnew/dialogs/dialog_create_array_base.cpp:178
msgid "Horizontal, then vertical"
msgstr "수평 다음 수직"

#: pcbnew/dialogs/dialog_create_array_base.cpp:178
msgid "Vertical, then horizontal"
msgstr "수직 다음 수평"

#: pcbnew/dialogs/dialog_create_array_base.cpp:180
msgid "Numbering Direction"
msgstr "번호 매기기 방향"

#: pcbnew/dialogs/dialog_create_array_base.cpp:184
msgid "Reverse numbering on alternate rows/columns"
msgstr "대체 행/열에 대한 번호 매기기 방향 반전"

#: pcbnew/dialogs/dialog_create_array_base.cpp:187
#: pcbnew/dialogs/dialog_create_array_base.cpp:478
msgid "Use first free number"
msgstr "첫번째 빈 번호에 사용"

#: pcbnew/dialogs/dialog_create_array_base.cpp:187
#: pcbnew/dialogs/dialog_create_array_base.cpp:478
msgid "From start value"
msgstr "시작값에서"

#: pcbnew/dialogs/dialog_create_array_base.cpp:189
msgid "Initial Pad Number"
msgstr "첫 번째 패드 번호"

#: pcbnew/dialogs/dialog_create_array_base.cpp:193
msgid "Continuous (1, 2, 3...)"
msgstr "연속 (1, 2, 3...)"

#: pcbnew/dialogs/dialog_create_array_base.cpp:193
msgid "Coordinate (A1, A2, ... B1, ...)"
msgstr "좌표 (A1, A2, ... B1, ...)"

#: pcbnew/dialogs/dialog_create_array_base.cpp:195
msgid "Pad Numbering Scheme"
msgstr "패드 번호 매기기 방식"

#: pcbnew/dialogs/dialog_create_array_base.cpp:199
msgid "Primary axis numbering:"
msgstr "주축 번호 매기기:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:208
msgid "Secondary axis numbering:"
msgstr "보조축 번호 매기기:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:227
#: pcbnew/dialogs/dialog_create_array_base.cpp:499
msgid "Pad numbering start:"
msgstr "패드 번호 매기기 시작:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:241
#: pcbnew/dialogs/dialog_create_array_base.cpp:506
msgid "Pad numbering skip:"
msgstr "패드 번호 매기기 건너뛰기:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:268
msgid "Grid Array"
msgstr "그리드 배열"

#: pcbnew/dialogs/dialog_create_array_base.cpp:277
msgid "Items to duplicate"
msgstr "복제할 항목"

#: pcbnew/dialogs/dialog_create_array_base.cpp:279
msgid ""
"This is the position of the selected item,\n"
"or the position of the group to duplicate"
msgstr ""
"선택한 항목의 위치,\n"
"또는 복제할 그룹의 위치"

#: pcbnew/dialogs/dialog_create_array_base.cpp:289
msgid "Ref point pos X:"
msgstr "참조 지점 위치 X:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:300
msgid "Ref point pos Y:"
msgstr "참조 지점 위치 Y:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:318
msgid "Circular array params"
msgstr "원형 배열 매개변수"

#: pcbnew/dialogs/dialog_create_array_base.cpp:320
msgid "Set center by position"
msgstr "위치별 중심 설정"

#: pcbnew/dialogs/dialog_create_array_base.cpp:324
msgid "Set center by radius"
msgstr "반경으로 중심 설정"

#: pcbnew/dialogs/dialog_create_array_base.cpp:327
msgid ""
"This is the position of the center of the circle\n"
"defining the circular area to create"
msgstr ""
"원의 중심 위치\n"
"생성할 원형 영역을 정의"

#: pcbnew/dialogs/dialog_create_array_base.cpp:337
msgid "Center pos X:"
msgstr "중앙 위치 X:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:348
msgid "Center pos Y:"
msgstr "중앙 위치 Y:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:365
msgid ""
"Array radius,\n"
"from Ref point pos and array center:"
msgstr ""
"배열 반경,\n"
"기준점 위치 및 배열 중심에서:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:373
msgid "Distance between Ref point and Center pos."
msgstr "기준점과 중심 위치 사이의 거리."

#: pcbnew/dialogs/dialog_create_array_base.cpp:384
msgid ""
"Array angle,\n"
"from Ref point pos and array center:"
msgstr ""
"배열 각도,\n"
"기준점 위치 및 배열 중심에서:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:400
msgid "Angle between Ref point and Center pos."
msgstr "기준점과 중심 위치 사이의 각도."

#: pcbnew/dialogs/dialog_create_array_base.cpp:418
msgid "Duplicate parameters"
msgstr "중복 매개변수"

#: pcbnew/dialogs/dialog_create_array_base.cpp:431
msgid ""
"Positive angles represent an anti-clockwise rotation. An angle of 0 will "
"produce a full circle divided evenly into \"Count\" portions."
msgstr ""
"각도가 양수일 경우 반시계 방향 회전을 의미합니다. 각도가 0일 경우엔 완전한 원"
"을 \"Count\" 부분으로 균등하게 분할합니다."

#: pcbnew/dialogs/dialog_create_array_base.cpp:439
msgid "Item count:"
msgstr "항목 수:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:444
msgid "How many items in the array."
msgstr "배열의 항목 수."

#: pcbnew/dialogs/dialog_create_array_base.cpp:451
msgid "Rotate items:"
msgstr "항목 회전:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:457
msgid ""
"Rotate the item as well as move it - multi-selections will be rotated "
"together"
msgstr ""
"항목을 움직이면서 동시에 회전 - 여러 항목을 선택했을 경우 같이 회전됩니다"

#: pcbnew/dialogs/dialog_create_array_base.cpp:476
msgid "Numbering Options"
msgstr "번호 매기기 설정"

#: pcbnew/dialogs/dialog_create_array_base.cpp:480
msgid "Initial Pad Number:"
msgstr "초기 패드 번호:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:484
msgid "Pad Numbering:"
msgstr "패드 번호 매기기:"

#: pcbnew/dialogs/dialog_create_array_base.cpp:526
msgid "Circular Array"
msgstr "원형 배열"

#: pcbnew/dialogs/dialog_create_array_base.cpp:535
msgid "Footprint Annotation"
msgstr "풋프린트 주석"

#: pcbnew/dialogs/dialog_create_array_base.cpp:537
msgid "Keep existing reference designators"
msgstr "기존 참조 지정자 유지"

#: pcbnew/dialogs/dialog_create_array_base.cpp:540
msgid "Assign unique reference designators"
msgstr "고유 참조 지정자 할당"

#: pcbnew/dialogs/dialog_create_array_base.cpp:542
msgid ""
"This can conflict with reference designators in the schematic that have not "
"yet been synchronized with the board."
msgstr ""
"이것은 아직 보드와 동기화되지 않은 회로도의 참조 지정자와 충돌할 수 있습니다."

#: pcbnew/dialogs/dialog_create_array_base.h:142
msgid "Create Array"
msgstr "배열 생성"

#: pcbnew/dialogs/dialog_dimension_properties.cpp:222
msgid ""
"This item was on a non-existing layer.\n"
"It has been moved to the first defined layer."
msgstr ""
"이 항목은 존재하지 않는 레이어에 있습니다.\n"
"첫 번째 정의된 레이어로 이동되었습니다."

#: pcbnew/dialogs/dialog_dimension_properties.cpp:311
msgid "Change dimension properties"
msgstr "치수 속성 변경"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:22
msgid "Leader Format"
msgstr "지시선 형식"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:39
msgid "Text frame:"
msgstr "텍스트 프레임:"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:41
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:49
msgid "Draw a shape around the leader text"
msgstr "선두 텍스트의 주위에 형상 그리기"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:53
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:76
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:185
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:127
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:155
#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:25
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:257
#: pcbnew/dialogs/dialog_text_properties_base.cpp:89
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:76
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:165
#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:140
msgid "Layer:"
msgstr "레이어:"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:69
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:89
msgid "Dimension Format"
msgstr "치수 유형"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:98
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:104
msgid "Measured value of this dimension"
msgstr "현재 치수의 측정 값"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:108
msgid "Override value"
msgstr "값 재정의"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:109
msgid ""
"When checked, the actual measurement is ignored and any value can be entered"
msgstr "체크할 경우, 실제 측정치는 무시되고 임의의 값을 입력할 수 있습니다"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:116
#: pcbnew/dialogs/dialog_export_2581_base.cpp:51
#: pcbnew/dialogs/dialog_export_idf_base.cpp:44
#: pcbnew/dialogs/dialog_export_step_base.cpp:68
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:63
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:90
msgid "Units:"
msgstr "단위:"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:118
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:126
msgid ""
"Units of this dimension (\"automatic\" to follow the units selected in the "
"editor)"
msgstr "현재 치수의 단위 (\"자동\" 을 선택하면 편집기에서 선택한 단위를 사용)"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:132
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:137
msgid "Text to print before the dimension value"
msgstr "치수 값 앞에 출력할 텍스트"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:141
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:117
msgid "Units format:"
msgstr "단위 형식:"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:143
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:151
msgid "Choose how to display the units"
msgstr "단위 표시 방법을 선택"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:147
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:121
msgid "1234"
msgstr "1234"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:147
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:121
msgid "1234 mm"
msgstr "1234 mm"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:147
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:121
msgid "1234 (mm)"
msgstr "1234 (밀리미터)"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:157
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:162
msgid "Text to print after the dimension value"
msgstr "치수 값 뒤에 출력할 텍스트"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:166
#: pcbnew/dialogs/dialog_export_2581_base.cpp:61
#: pcbnew/dialogs/dialog_gendrill_base.cpp:126
#: pcbnew/dialogs/dialog_plot_base.cpp:368
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:132
msgid "Precision:"
msgstr "정밀도:"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:168
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:176
msgid "Choose how many digits of precision to display"
msgstr "표시할 자리수 정밀도를 선택"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:345
#: pcbnew/dialogs/dialog_text_properties_base.cpp:240
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:188
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:136
#: pcbnew/pcb_dimension.cpp:1405
msgid "0.0"
msgstr "0.0"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:136
#: pcbnew/pcb_dimension.cpp:1406
msgid "0.00"
msgstr "0.00"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:136
#: pcbnew/pcb_dimension.cpp:1407
msgid "0.000"
msgstr "0.000"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:136
#: pcbnew/pcb_dimension.cpp:1408
msgid "0.0000"
msgstr "0.0000"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:136
#: pcbnew/pcb_dimension.cpp:1409
msgid "0.00000"
msgstr "0.00000"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
#: pcbnew/pcb_dimension.cpp:1410
msgid "0.00 in / 0 mils / 0.0 mm"
msgstr "0.00 in / 0 mils / 0.0 mm"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
#: pcbnew/pcb_dimension.cpp:1411
msgid "0.000 / 0 / 0.00"
msgstr "0.000 / 0 / 0.00"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
#: pcbnew/pcb_dimension.cpp:1412
msgid "0.0000 / 0.0 / 0.000"
msgstr "0.0000 / 0.0 / 0.000"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:172
#: pcbnew/pcb_dimension.cpp:1413
msgid "0.00000 / 0.00 / 0.0000"
msgstr "0.00000 / 0.00 / 0.0000"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:180
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:155
msgid "Suppress trailing zeroes"
msgstr "뒷자리 0 표시하지 않음"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:181
msgid ""
"When checked, \"0.100\" will be shown as \"0.1\" even if the precision "
"setting is higher"
msgstr ""
"체크할 경우, 정밀도가 더 높게 설정되어 있어도 \"0.100\" 은 \"0.1\" 로 표시됩"
"니다"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:209
msgid "Dimension Text"
msgstr "치수 텍스트"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:272
#: pcbnew/dialogs/dialog_text_properties_base.cpp:170
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:141
msgid "Text width"
msgstr "텍스트너비"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:288
#: pcbnew/dialogs/dialog_text_properties_base.cpp:209
msgid "Text pos X"
msgstr "텍스트 위치 X"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:301
#: pcbnew/dialogs/dialog_text_properties_base.cpp:183
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:157
msgid "Text height"
msgstr "텍스트 높이"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:314
#: pcbnew/dialogs/dialog_text_properties_base.cpp:222
msgid "Text pos Y"
msgstr "텍스트 위치 Y"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:325
#: pcbnew/dialogs/dialog_target_properties_base.cpp:39
#: pcbnew/dialogs/dialog_text_properties_base.cpp:194
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:168
msgid "Thickness:"
msgstr "두께:"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:327
#: pcbnew/dialogs/dialog_text_properties_base.cpp:196
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:170
msgid "Text thickness"
msgstr "텍스트 두께"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:340
#: pcbnew/dialogs/dialog_text_properties_base.cpp:235
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:183
msgid "Text orientation"
msgstr "텍스트 방향"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:346
#: pcbnew/dialogs/dialog_text_properties_base.cpp:241
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:189
msgid "90.0"
msgstr "90.0"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:347
#: pcbnew/dialogs/dialog_text_properties_base.cpp:242
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:190
msgid "-90.0"
msgstr "-90.0"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:348
#: pcbnew/dialogs/dialog_text_properties_base.cpp:243
#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:191
msgid "180.0"
msgstr "180.0"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:351
msgid "Position mode:"
msgstr "위치 모드 :"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:355
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:109
msgid "Outside"
msgstr "외부"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:355
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:109
msgid "Inline"
msgstr "인라인"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:355
msgid "Manual"
msgstr "설명서"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:359
msgid "Choose how to position the text relative to the dimension line"
msgstr "치수선을 기준으로 텍스트를 어떻게 정렬할 지 선택합니다"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:363
msgid "Keep aligned with dimension"
msgstr "치수선을 따라 정렬하기"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:364
msgid "Automatically set the text orientation to match the dimension lines"
msgstr "치수선에 맞추어 자동으로 텍스트를 정렬합니다"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:378
msgid "Dimension Line"
msgstr "치수선"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:387
msgid "Thickness of the dimension lines"
msgstr "치수선의 두께"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:401
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:144
msgid "Arrow length:"
msgstr "화살표 길이:"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:412
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:160
msgid "Extension line offset:"
msgstr "연장선 옵셋 :"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:414
#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:419
msgid "Gap between the measured points and the start of the extension lines"
msgstr "측정된 점과 치수 보조선 시작점 사이의 간격"

#: pcbnew/dialogs/dialog_dimension_properties_base.cpp:427
msgid "Extension line overshoot:"
msgstr "연장선 초과:"

#: pcbnew/dialogs/dialog_dimension_properties_base.h:141
#: pcbnew/pcb_dimension.cpp:1435 pcbnew/pcb_dimension.cpp:1506
#: pcbnew/pcb_dimension.cpp:1587 pcbnew/pcb_dimension.cpp:1633
msgid "Dimension Properties"
msgstr "치수 속성"

#: pcbnew/dialogs/dialog_drc.cpp:125
msgid "Run DRC"
msgstr "DRC 실행"

#: pcbnew/dialogs/dialog_drc.cpp:275
msgid "DRC incomplete: could not compile custom design rules."
msgstr "DRC 미 완료: 사용자 정의 설계 규칙을 컴파일할 수 없습니다."

#: pcbnew/dialogs/dialog_drc.cpp:277 pcbnew/tools/board_inspection_tool.cpp:213
msgid "Show design rules."
msgstr "디자인 규칙을 표시합니다."

#: pcbnew/dialogs/dialog_drc.cpp:323
msgid "-------- DRC cancelled by user.<br><br>"
msgstr "-------- DRC가 사용자에 의해 취소되었습니다.<br><br>"

#: pcbnew/dialogs/dialog_drc.cpp:596
#, c-format
msgid "Remove all exclusions for violations of rule '%s'"
msgstr "규칙 '%s' 위반에 대한 모든 제외 제거"

#: pcbnew/dialogs/dialog_drc.cpp:608
#, c-format
msgid "Exclude all violations of rule '%s'"
msgstr "모든 규칙 '%s' 위반 제외"

#: pcbnew/dialogs/dialog_drc.cpp:619
msgid "Run Inspect > Clearance Resolution"
msgstr "검사 실행 > 클리어런스 해결"

#: pcbnew/dialogs/dialog_drc.cpp:632
msgid "Run Inspect > Constraints Resolution"
msgstr "검사 실행 > 제약 조건 해결"

#: pcbnew/dialogs/dialog_drc.cpp:636
msgid "Run Inspect > Compare Footprint with Library"
msgstr "검사 실행 > 라이브러리와 풋프린트 비교"

#: pcbnew/dialogs/dialog_drc.cpp:645 pcbnew/dialogs/dialog_drc.cpp:652
msgid "Violation severities can also be edited in the Board Setup... dialog"
msgstr "위반 심각도는 보드 설정... 대화 상자에서도 변경할 수 있음"

#: pcbnew/dialogs/dialog_drc.cpp:663
msgid "Open the Board Setup... dialog"
msgstr "기판 설정... 대화창 열기"

#: pcbnew/dialogs/dialog_drc.cpp:903
#, c-format
msgid "Report file '%s' created<br>"
msgstr "보고서 파일 '%s' 생성됨<br>"

#: pcbnew/dialogs/dialog_drc.cpp:1233
msgid "not run"
msgstr "실행 되지 않음"

#: pcbnew/dialogs/dialog_drc_base.cpp:27
msgid "Refill all zones before performing DRC"
msgstr "DRC 수행 전 모든 영역 다시 채우기"

#: pcbnew/dialogs/dialog_drc_base.cpp:31
msgid ""
"If selected, all DRC violations for tracks will be reported.  This can be "
"slow for complicated designs.\n"
"\n"
"If unselected, only the first DRC violation will be reported for each track "
"connection."
msgstr ""
"선택할 경우, 배선의 모든 DRC 위반은 보고될 것입니다.  복잡한 설계도에서는 느"
"려질 수 있습니다.\n"
"\n"
"선택을 해제할 경우, 각 배선 연결마다 첫 번째 DRC 위반만이 보고됩니다."

#: pcbnew/dialogs/dialog_drc_base.cpp:125
#, c-format
msgid "Unconnected Items (%s)"
msgstr "연결되지 않은 항목 (%s)"

#: pcbnew/dialogs/dialog_drc_base.cpp:140
#, c-format
msgid "Schematic Parity (%s)"
msgstr "회로도 동등성 (%s)"

#: pcbnew/dialogs/dialog_drc_base.h:106 pcbnew/tools/pcb_actions.cpp:408
msgid "Design Rules Checker"
msgstr "디자인 규칙 검사기"

#: pcbnew/dialogs/dialog_enum_pads_base.cpp:19
msgid "Pad names are restricted to 4 characters (including number)."
msgstr "패드 이름은 4자(숫자 포함)로 제한됩니다."

#: pcbnew/dialogs/dialog_enum_pads_base.cpp:32
msgid "Pad name prefix:"
msgstr "패드 이름 접두사:"

#: pcbnew/dialogs/dialog_enum_pads_base.cpp:47
msgid "First pad number:"
msgstr "첫 번째 패드 번호:"

#: pcbnew/dialogs/dialog_enum_pads_base.cpp:54
msgid "Numbering step:"
msgstr "번호 지정 단계:"

#: pcbnew/dialogs/dialog_enum_pads_base.h:50
msgid "Pad Enumeration Settings"
msgstr "패드 열거 설정"

#: pcbnew/dialogs/dialog_exchange_footprints.cpp:72
msgid "Change Footprints"
msgstr "풋프린트 변경"

#: pcbnew/dialogs/dialog_exchange_footprints.cpp:73
msgid "Change all footprints on board"
msgstr "기판내 모든 풋프린트 변경"

#: pcbnew/dialogs/dialog_exchange_footprints.cpp:74
msgid "Change selected footprint(s)"
msgstr "선택한 풋프린트 변경"

#: pcbnew/dialogs/dialog_exchange_footprints.cpp:75
msgid "Change footprints matching reference designator:"
msgstr "참조 지정자와 일치하는 풋프린트 변경:"

#: pcbnew/dialogs/dialog_exchange_footprints.cpp:76
msgid "Change footprints matching value:"
msgstr "풋프린트 일치 값 변경:"

#: pcbnew/dialogs/dialog_exchange_footprints.cpp:77
msgid "Change footprints with library id:"
msgstr "라이브러리 ID로 풋프린트 변경:"

#: pcbnew/dialogs/dialog_exchange_footprints.cpp:78
msgid "Update text layers and visibilities"
msgstr "텍스트 레이어 및 가시성 업데이트"

#: pcbnew/dialogs/dialog_exchange_footprints.cpp:79
msgid "Update text sizes, styles and positions"
msgstr "텍스트 크기, 스타일 및 위치 업데이트"

#: pcbnew/dialogs/dialog_exchange_footprints.cpp:80
msgid "Update fabrication attributes"
msgstr "기판 제조 속성 업데이트"

#: pcbnew/dialogs/dialog_exchange_footprints.cpp:81
msgid "Update 3D models"
msgstr "3D 모델 업데이트"

#: pcbnew/dialogs/dialog_exchange_footprints.cpp:85
msgid ""
"Update/reset strings: there are two cases these descriptions need to cover: "
"the user made overrides to a footprint on the PCB and wants to remove them, "
"or the user made changes to the library footprint and wants to propagate "
"them back to the PCB."
msgstr ""
"문자열 업데이트/초기화: 이러한 설명이 적용되는 두 가지 케이스가 있습니다: 사"
"용자가 PCB상의 풋프린트를 재정의한 후 이를 삭제하고 싶을 때, 또는 사용자가 라"
"이브러리 풋프린트를 변경한 뒤 이를 PCB에 반영하고자 할 때."

#: pcbnew/dialogs/dialog_exchange_footprints.cpp:354
#, c-format
msgid "Updated footprint %s (%s)"
msgstr "업데이트된 풋프린트 %s(%s)"

#: pcbnew/dialogs/dialog_exchange_footprints.cpp:360
#, c-format
msgid "Changed footprint %s from '%s' to '%s'"
msgstr "풋프린트 %s을 '%s'에서 '%s'로 변경"

#: pcbnew/dialogs/dialog_exchange_footprints.cpp:370
msgid "*** library footprint not found ***"
msgstr "*** 라이브러리 풋프린트를 찾을 수 없음 ***"

#: pcbnew/dialogs/dialog_exchange_footprints.cpp:390
msgid ": (no changes)"
msgstr ": (변경 사항 없음)"

#: pcbnew/dialogs/dialog_exchange_footprints.cpp:395
msgid ": OK"
msgstr ": 확인"

#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:25
msgid "Update all footprints on board"
msgstr "기판내 모든 풋프린트 업데이트"

#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:28
msgid "Update selected footprint(s)"
msgstr "선택한 풋프린트 업데이트"

#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:31
msgid "Update footprints matching reference designator:"
msgstr "참조 지정자와 일치하는 풋프린트 업데이트:"

#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:39
msgid "Update footprints matching value:"
msgstr "값과 일치하는 풋프린트 업데이트:"

#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:45
msgid "Update footprints with library id:"
msgstr "라이브러리 ID로 풋프린트 업데이트:"

#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:74
msgid "New footprint library id:"
msgstr "새 풋프린트 라이브러리 ID:"

#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:97
msgid "Remove text items which are not in library footprint"
msgstr "라이브러리 풋프린트에 없는 텍스트 항목 제거"

#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:102
msgid "Update/reset text layers and visibilities"
msgstr "텍스트 레이어 및 가시성 업데이트/초기화"

#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:105
msgid "Update/reset text sizes, styles and positions"
msgstr "텍스트 크기, 스타일 및 위치 업데이트/초기화"

#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:108
msgid "Update/reset fabrication attributes"
msgstr "기판 제조 속성 업데이트/초기화"

#: pcbnew/dialogs/dialog_exchange_footprints_base.cpp:111
msgid "Update/reset 3D models"
msgstr "3D 모델 업데이트/초기화"

#: pcbnew/dialogs/dialog_exchange_footprints_base.h:87
msgid "Update Footprints from Library"
msgstr "라이브러리에서 풋프린트 업데이트"

#: pcbnew/dialogs/dialog_export_2581.cpp:71
msgid "IPC-2581 Files (*.xml)|*.xml"
msgstr "IPC-2581 파일 (*.xml)|*.xml"

#: pcbnew/dialogs/dialog_export_2581.cpp:72
msgid "IPC-2581 Compressed Files (*.zip)|*.zip"
msgstr "IPC-2581 압축 파일 (*.zip)|*.zip"

#: pcbnew/dialogs/dialog_export_2581.cpp:74
msgid "Export IPC-2581 File"
msgstr "IPC-2581 파일 내보내기"

#: pcbnew/dialogs/dialog_export_2581.cpp:132
msgid "manufacturer"
msgstr "제조사"

#: pcbnew/dialogs/dialog_export_2581.cpp:140
msgid "mfg"
msgstr "mfg"

#: pcbnew/dialogs/dialog_export_2581_base.cpp:28
#: pcbnew/dialogs/dialog_export_step_base.cpp:28
#: pcbnew/dialogs/dialog_export_svg_base.cpp:30
msgid ""
"Enter a filename if you do not want to use default file names\n"
"Can be used only when printing the current sheet"
msgstr ""
"기본 파일명을 사용하고 싶지 않다면, 파일명을 입력하세요.\n"
"현재 시트를 출력할 때만 사용됩니다"

#: pcbnew/dialogs/dialog_export_2581_base.cpp:63
#: pcbnew/dialogs/dialog_export_2581_base.cpp:68
msgid "The number of values following the decimal separator"
msgstr "소수 구분자 뒤에 오는 값의 수"

#: pcbnew/dialogs/dialog_export_2581_base.cpp:72
msgid "Version:"
msgstr "버전:"

#: pcbnew/dialogs/dialog_export_2581_base.cpp:82
msgid "Compress output"
msgstr "출력 압축"

#: pcbnew/dialogs/dialog_export_2581_base.cpp:83
msgid "Compress output into 'zip' file"
msgstr "출력을 'zip' 파일로 압축"

#: pcbnew/dialogs/dialog_export_2581_base.cpp:94
msgid "BOM Columns"
msgstr "BOM 열"

#: pcbnew/dialogs/dialog_export_2581_base.cpp:101
msgid "Internal ID:"
msgstr "내부 ID:"

#: pcbnew/dialogs/dialog_export_2581_base.cpp:103
#: pcbnew/dialogs/dialog_export_2581_base.cpp:111
msgid ""
"Part ID number used internally during design.\n"
"This number must be unique to each part."
msgstr ""
"설계 시 내부적으로 사용되는 부품 ID 번호입니다.\n"
"이 번호는 각 부품마다 고유해야 합니다."

#: pcbnew/dialogs/dialog_export_2581_base.cpp:107
msgid "Generate Unique"
msgstr "고유 번호 생성"

#: pcbnew/dialogs/dialog_export_2581_base.cpp:115
msgid "Manufacturer P/N:"
msgstr "제조업체 P/N:"

#: pcbnew/dialogs/dialog_export_2581_base.cpp:117
#: pcbnew/dialogs/dialog_export_2581_base.cpp:125
msgid "Column containing the manufacturer part number"
msgstr "제조사 부품 번호가 포함된 열"

#: pcbnew/dialogs/dialog_export_2581_base.cpp:121
#: pcbnew/dialogs/dialog_export_2581_base.cpp:145
msgid "Omit"
msgstr "생략"

#: pcbnew/dialogs/dialog_export_2581_base.cpp:129
msgid "Manufacturer:"
msgstr "제조업체:"

#: pcbnew/dialogs/dialog_export_2581_base.cpp:141
msgid "Distributor P/N:"
msgstr "유통업체 P/N:"

#: pcbnew/dialogs/dialog_export_2581_base.cpp:149
msgid "Column containing the distributor part number"
msgstr "유통업체 부품 번호가 포함된 열"

#: pcbnew/dialogs/dialog_export_2581_base.cpp:153
msgid "Distributor:"
msgstr "유통업체:"

#: pcbnew/dialogs/dialog_export_2581_base.h:81
msgid "Export IPC-2581"
msgstr "IPC-2581 내보내기"

#: pcbnew/dialogs/dialog_export_idf.cpp:173
#: pcbnew/dialogs/dialog_gencad_export_options.cpp:120
#, c-format
msgid "File %s already exists."
msgstr "파일 %s이(가) 이미 존재합니다."

#: pcbnew/dialogs/dialog_export_idf_base.cpp:21
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:22
msgid "File name:"
msgstr "파일 이름:"

#: pcbnew/dialogs/dialog_export_idf_base.cpp:25
msgid "Select an IDF export filename"
msgstr "IDF 내보내기 파일명을 지정"

#: pcbnew/dialogs/dialog_export_idf_base.cpp:25
msgid "*.emn"
msgstr "*.emn"

#: pcbnew/dialogs/dialog_export_idf_base.cpp:34
msgid "Grid reference point:"
msgstr "그리드 기준점:"

#: pcbnew/dialogs/dialog_export_idf_base.cpp:38
msgid "Adjust automatically"
msgstr "자동 수정"

#: pcbnew/dialogs/dialog_export_idf_base.cpp:60
#: pcbnew/dialogs/dialog_export_step_base.cpp:78
msgid "X position:"
msgstr "X 위치:"

#: pcbnew/dialogs/dialog_export_idf_base.cpp:81
#: pcbnew/dialogs/dialog_export_step_base.cpp:93
msgid "Y position:"
msgstr "Y 위치:"

#: pcbnew/dialogs/dialog_export_idf_base.cpp:104
msgid "Output Units"
msgstr "출력 단위"

#: pcbnew/dialogs/dialog_export_idf_base.h:59
msgid "Export IDFv3"
msgstr "IDFv3 내보내기"

#: pcbnew/dialogs/dialog_export_step.cpp:218
msgid "Non-unity scaled models:"
msgstr "배율이 일정하지 않은 모델:"

#: pcbnew/dialogs/dialog_export_step.cpp:220
msgid ""
"Scaled models detected.  Model scaling is not reliable for mechanical export."
msgstr ""
"크기가 조정된 모델이 감지되었습니다. 모델의 크기 변환은 기계용 내보내기 시에 "
"불안정을 초래합니다."

#: pcbnew/dialogs/dialog_export_step.cpp:222
msgid "Model Scale Warning"
msgstr "모델 배율 경고"

#: pcbnew/dialogs/dialog_export_step.cpp:306
msgid "STEP export failed!  Please save the PCB and try again"
msgstr "STEP 내보내기 실패!  PCB를 저장하고 다시 시도하십시오"

#: pcbnew/dialogs/dialog_export_step.cpp:340
msgid "STEP files"
msgstr "STEP 파일"

#: pcbnew/dialogs/dialog_export_step.cpp:342
msgid "Binary glTF files"
msgstr "이진 glTF 파일"

#: pcbnew/dialogs/dialog_export_step.cpp:349
msgid "STEP Output File"
msgstr "STEP 출력 파일"

#: pcbnew/dialogs/dialog_export_step.cpp:368
msgid "No filename for output file"
msgstr "출력 파일의 파일명이 없음"

#: pcbnew/dialogs/dialog_export_step.cpp:400
#, c-format
msgid ""
"Board outline is missing or not closed using %.3f mm tolerance.\n"
"Run DRC for a full analysis."
msgstr ""
"기판의 외곽선이 누락되었거나 %.3f 허용 오차로 닫혀있지 않습니다.\n"
"전체 분석을 위해 DRC를 실행시키세요."

#: pcbnew/dialogs/dialog_export_step.cpp:412
msgid "STEP/GLTF Export"
msgstr "STEP/GLTF 내보내기"

#: pcbnew/dialogs/dialog_export_step_base.cpp:43
msgid "Coordinates"
msgstr "좌표"

#: pcbnew/dialogs/dialog_export_step_base.cpp:45
#: pcbnew/dialogs/dialog_gendrill_base.cpp:98
#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:23
msgid "Drill/place file origin"
msgstr "드릴/배치 파일 원점"

#: pcbnew/dialogs/dialog_export_step_base.cpp:48
#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:23
msgid "Grid origin"
msgstr "그리드 원점"

#: pcbnew/dialogs/dialog_export_step_base.cpp:51
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:44
msgid "User defined origin"
msgstr "사용자 정의 원점"

#: pcbnew/dialogs/dialog_export_step_base.cpp:54
#: pcbnew/dialogs/dialog_export_vrml_base.cpp:44
msgid "Board center origin"
msgstr "보드 중심 원점"

#: pcbnew/dialogs/dialog_export_step_base.cpp:61
msgid "User Defined Origin"
msgstr "사용자 정의 원점"

#: pcbnew/dialogs/dialog_export_step_base.cpp:115
msgid "Other Options"
msgstr "다른 옵션"

#: pcbnew/dialogs/dialog_export_step_base.cpp:117
msgid "Ignore 'Do not populate' components"
msgstr "'부착하지 않음' 컴포넌트 무시하기"

#: pcbnew/dialogs/dialog_export_step_base.cpp:118
msgid "Do not show components marked 'Do not populate'"
msgstr "'부착하지 않음'으로 표시된 컴포넌트를 표시하지 않음"

#: pcbnew/dialogs/dialog_export_step_base.cpp:122
msgid "Ignore 'Unspecified' components"
msgstr "'지정되지 않음' 컴포넌트 무시하기"

#: pcbnew/dialogs/dialog_export_step_base.cpp:123
msgid "Do not show components with Footprint Type 'Unspecified'"
msgstr "풋프린트 유형이 '지정되지 않음'인 컴포넌트를 표시하지 않음"

#: pcbnew/dialogs/dialog_export_step_base.cpp:127
msgid "Substitute similarly named models"
msgstr "비슷한 이름의 모델을 치환"

#: pcbnew/dialogs/dialog_export_step_base.cpp:128
msgid "Replace VRML models with STEP models of the same name"
msgstr "VRML 모델을 같은 이름의 STEP 모델로 교체"

#: pcbnew/dialogs/dialog_export_step_base.cpp:132
msgid "Overwrite old file"
msgstr "오래된 파일 덮어쓰기"

#: pcbnew/dialogs/dialog_export_step_base.cpp:140
msgid "Optimize STEP file"
msgstr "STEP 파일 최적화"

#: pcbnew/dialogs/dialog_export_step_base.cpp:141
msgid ""
"Disables writing parametric curves. Optimizes file size and write/read "
"times, but may reduce compatibility with other software."
msgstr ""
"파라메트릭 곡선 작성을 비활성화합니다. 파일 크기와 쓰기/읽기 시간을 최적화하"
"지만 다른 소프트웨어와의 호환성이 저하될 수 있습니다."

#: pcbnew/dialogs/dialog_export_step_base.cpp:145
msgid "Fuse shapes (time consuming)"
msgstr "퓨즈 모양(시간이 오래 걸림)"

#: pcbnew/dialogs/dialog_export_step_base.cpp:147
msgid "Combine intersecting geometry into one shape."
msgstr "교차하는 도형을 하나의 모양으로 결합합니다."

#: pcbnew/dialogs/dialog_export_step_base.cpp:151
msgid "Export as Compound shape"
msgstr "복합 도형으로 내보내기"

#: pcbnew/dialogs/dialog_export_step_base.cpp:153
msgid ""
"Merges all shapes into a single Compound shape. Useful for external software "
"that does de-duplication based on shape names."
msgstr ""
"모든 도형을 하나의 복합 도형으로 병합합니다. 도형 이름을 기반으로 중복 제거"
"를 수행하는 외부 소프트웨어에 유용합니다."

#: pcbnew/dialogs/dialog_export_step_base.cpp:160
msgid "Export tracks, pads and vias"
msgstr "트랙, 패드 및 비아 내보내기"

#: pcbnew/dialogs/dialog_export_step_base.cpp:161
msgid "Export tracks, pads and vias on external copper layers."
msgstr "외부 구리 층의 트랙과 비아를 내보냅니다."

#: pcbnew/dialogs/dialog_export_step_base.cpp:166
msgid "Export zones on external copper layers."
msgstr "외부 구리 층의 영역을 내보냅니다."

#: pcbnew/dialogs/dialog_export_step_base.cpp:170
msgid "Export silkscreen"
msgstr "실크스크린 내보내기"

#: pcbnew/dialogs/dialog_export_step_base.cpp:172
msgid "Export silkscreen graphics."
msgstr "실크스크린 그래픽 내보내기."

#: pcbnew/dialogs/dialog_export_step_base.cpp:176
msgid "Export solder mask"
msgstr "솔더 마스크 내보내기"

#: pcbnew/dialogs/dialog_export_step_base.cpp:178
msgid "Export solder mask graphics."
msgstr "솔더 마스크 그래픽 내보내기."

#: pcbnew/dialogs/dialog_export_step_base.cpp:182
msgid "Export solder paste"
msgstr "솔더 페이스트 내보내기"

#: pcbnew/dialogs/dialog_export_step_base.cpp:184
msgid "Export solder paste graphics."
msgstr "솔더 페이스트 그래픽 내보내기."

#: pcbnew/dialogs/dialog_export_step_base.cpp:188
msgid "Board outline chaining tolerance:"
msgstr "기판 외곽선 연결 허용치:"

#: pcbnew/dialogs/dialog_export_step_base.cpp:192
msgid "Tight (0.001 mm)"
msgstr "좁게 (0.001 mm)"

#: pcbnew/dialogs/dialog_export_step_base.cpp:192
msgid "Standard (0.01 mm)"
msgstr "표준(0.01mm)"

#: pcbnew/dialogs/dialog_export_step_base.cpp:192
msgid "Loose (0.1 mm)"
msgstr "느슨하게 (0.1mm)"

#: pcbnew/dialogs/dialog_export_step_base.cpp:196
msgid ""
"Tolerance sets the distance between two points that are considered joined "
"when building the board outlines."
msgstr ""
"허용 오차는 보드 윤곽선을 만들 때 결합된 것으로 간주되는 두 점 사이의 거리를 "
"설정합니다."

#: pcbnew/dialogs/dialog_export_step_base.h:93
msgid "Export STEP / GLTF"
msgstr "STEP / GLTF 내보내기"

#: pcbnew/dialogs/dialog_export_step_process.cpp:183
#, c-format
msgid "Process failed with exit code %d"
msgstr "종료 코드 %d로 인해 프로세스 실패함"

#: pcbnew/dialogs/dialog_export_step_process.cpp:191
msgid "Success"
msgstr "성공"

#: pcbnew/dialogs/dialog_export_step_process.cpp:246
msgid "Command line:\n"
msgstr "명령줄:\n"

#: pcbnew/dialogs/dialog_export_step_process_base.h:46
msgid "3D Export"
msgstr "3D 내보내기"

#: pcbnew/dialogs/dialog_export_svg.cpp:246
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:215
msgid "Use a relative path?"
msgstr "상대 경로를 사용하시겠습니까?"

#: pcbnew/dialogs/dialog_export_svg.cpp:256
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:224
#: pcbnew/dialogs/dialog_gendrill.cpp:319
msgid ""
"Cannot make path relative (target volume different from board file volume)!"
msgstr "상대 경로를 만들 수 없습니다 (타겟 볼륨이 기판 파일 볼륨과 다릅니다)!"

#: pcbnew/dialogs/dialog_export_svg.cpp:308
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:289
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:396
#: pcbnew/dialogs/dialog_plot.cpp:1124
#, c-format
msgid "Could not write plot files to folder '%s'."
msgstr "폴더 '%s' 에 플롯 파일을 쓸 수 없습니다."

#: pcbnew/dialogs/dialog_export_svg.cpp:355
#, c-format
msgid "Exported '%s'."
msgstr "'%s' 내보내기."

#: pcbnew/dialogs/dialog_export_svg_base.cpp:64
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:509
msgid "Technical layers:"
msgstr "기술 레이어:"

#: pcbnew/dialogs/dialog_export_svg_base.cpp:83
msgid "Print Mode"
msgstr "인쇄 모드"

#: pcbnew/dialogs/dialog_export_svg_base.cpp:85
msgid "Export as black elements on a white background"
msgstr "흰 배경에 검은색 요소로 내보내기"

#: pcbnew/dialogs/dialog_export_svg_base.cpp:89
msgid "Use current board theme"
msgstr "현재 보드 테마 사용"

#: pcbnew/dialogs/dialog_export_svg_base.cpp:114
msgid "Page with frame and title block"
msgstr "제목 블록과 프레임이 있는 페이지"

#: pcbnew/dialogs/dialog_export_svg_base.cpp:114
msgid "Current page size"
msgstr "현재 페이지 크기"

#: pcbnew/dialogs/dialog_export_svg_base.cpp:114
msgid "Board area only"
msgstr "보드 영역만"

#: pcbnew/dialogs/dialog_export_svg_base.cpp:116
msgid "SVG Page Size"
msgstr "SVG 페이지 크기"

#: pcbnew/dialogs/dialog_export_svg_base.cpp:121
msgid "Print the layer(s) horizontally mirrored"
msgstr "수평으로 반전된 레이어 출력"

#: pcbnew/dialogs/dialog_export_svg_base.cpp:125
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:262
msgid "Print one page per layer"
msgstr "레이어당 한 페이지 인쇄"

#: pcbnew/dialogs/dialog_export_svg_base.cpp:134
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:268
msgid "Print board edges on all pages"
msgstr "모든 페이지에 기판 모서리 인쇄"

#: pcbnew/dialogs/dialog_export_svg_base.h:76
msgid "Export SVG File"
msgstr "SVG 파일 내보내기"

#: pcbnew/dialogs/dialog_export_vrml.cpp:193
msgid "Are you sure you want to overwrite the existing file?"
msgstr "이미 존재하는 파일에 덮어쓰시겠습니까?"

#: pcbnew/dialogs/dialog_export_vrml.cpp:268
#: pcbnew/pcb_io/altium/altium_pcb.cpp:1620
#, c-format
msgid "Failed to create folder '%s'."
msgstr "폴더 '%s' 생성 실패."

#: pcbnew/dialogs/dialog_export_vrml_base.cpp:26
msgid "Save VRML Board File"
msgstr "VRML 기판 파일 저장"

#: pcbnew/dialogs/dialog_export_vrml_base.cpp:26
msgid "*.wrl"
msgstr "*.wrl"

#: pcbnew/dialogs/dialog_export_vrml_base.cpp:31
msgid "Footprint 3D model path:"
msgstr "풋프린트 3D 모델 경로:"

#: pcbnew/dialogs/dialog_export_vrml_base.cpp:46
msgid "Coordinate Origin Options"
msgstr "좌표 원점 옵션"

#: pcbnew/dialogs/dialog_export_vrml_base.cpp:53
msgid "User defined origin:"
msgstr "사용자 정의 원점:"

#: pcbnew/dialogs/dialog_export_vrml_base.cpp:109
msgid "meter"
msgstr "미터"

#: pcbnew/dialogs/dialog_export_vrml_base.cpp:109
msgid "0.1 Inch"
msgstr "0.1 인치"

#: pcbnew/dialogs/dialog_export_vrml_base.cpp:124
msgid "Copy 3D model files to 3D model path"
msgstr "3D 모델 경로에서 3D 모델 파일 복사"

#: pcbnew/dialogs/dialog_export_vrml_base.cpp:125
msgid ""
"If checked: copy 3D models to the destination folder\n"
"If not checked: Embed 3D models in the VRML board file"
msgstr ""
"체크할 경우: 목적지 폴더에 3D 모델을 복사\n"
"체크하지 않을 경우: VRML 기판 파일에 3D 모델 포함"

#: pcbnew/dialogs/dialog_export_vrml_base.cpp:129
msgid "Use relative paths to model files in board VRML file"
msgstr "VRML 기판 파일의 모델 파일에 상대 경로 사용"

#: pcbnew/dialogs/dialog_export_vrml_base.cpp:130
msgid "Use paths for model files in board VRML file relative to the VRML file"
msgstr "VRML 기판 파일의 모델 파일에 VRML 파일에 대한 상대 경로를 사용합니다"

#: pcbnew/dialogs/dialog_export_vrml_base.h:65
msgid "VRML Export Options"
msgstr "VRML 내보내기 옵션"

#: pcbnew/dialogs/dialog_filter_selection_base.cpp:22
#: pcbnew/widgets/panel_selection_filter.cpp:183
#: pcbnew/widgets/panel_selection_filter_base.cpp:19
msgid "All items"
msgstr "모든 항목"

#: pcbnew/dialogs/dialog_filter_selection_base.cpp:30
msgid "Include &footprints"
msgstr "풋프린트 포함 (&f)"

#: pcbnew/dialogs/dialog_filter_selection_base.cpp:33
msgid "Include t&ext items"
msgstr "텍스트 항목 포함 (&e)"

#: pcbnew/dialogs/dialog_filter_selection_base.cpp:36
msgid "Include &locked footprints"
msgstr "잠긴 풋프린트 포함 (&l)"

#: pcbnew/dialogs/dialog_filter_selection_base.cpp:39
msgid "Include &drawings"
msgstr "도면 포함 (&d)"

#: pcbnew/dialogs/dialog_filter_selection_base.cpp:42
msgid "Include &tracks"
msgstr "배선 포함 (&t)"

#: pcbnew/dialogs/dialog_filter_selection_base.cpp:45
msgid "Include &board outline layer"
msgstr "기판 외곽선 레이어 포함 (&b)"

#: pcbnew/dialogs/dialog_filter_selection_base.cpp:48
msgid "Include &vias"
msgstr "비아 포함 (&v)"

#: pcbnew/dialogs/dialog_filter_selection_base.cpp:51
msgid "Include &zones"
msgstr "영역 포함 (&z)"

#: pcbnew/dialogs/dialog_filter_selection_base.h:57
msgid "Filter Selected Items"
msgstr "선택된 항목 필터링"

#: pcbnew/dialogs/dialog_find.cpp:250
msgid "Searching..."
msgstr "찾는 중..."

#: pcbnew/dialogs/dialog_find.cpp:382
#, c-format
msgid "'%s' not found"
msgstr "%s을(를) 찾을 수 없음"

#: pcbnew/dialogs/dialog_find.cpp:390
msgid "No more items to show"
msgstr "더 이상 표시할 항목 없음"

#: pcbnew/dialogs/dialog_find.cpp:392
msgid "No hits"
msgstr "일치하지 않음"

#: pcbnew/dialogs/dialog_find.cpp:398
#, c-format
msgid "'%s' found"
msgstr "'%s' 발견"

#: pcbnew/dialogs/dialog_find.cpp:401
#, c-format
msgid "Hit(s): %d / %zu"
msgstr "조회수: %d / %zu"

#: pcbnew/dialogs/dialog_find_base.cpp:28
msgid "Search for:"
msgstr "찾기:"

#: pcbnew/dialogs/dialog_find_base.cpp:43
msgid "Match case"
msgstr "대소문자 일치"

#: pcbnew/dialogs/dialog_find_base.cpp:52
msgid "Wrap"
msgstr "순환"

#: pcbnew/dialogs/dialog_find_base.cpp:62
msgid "Search footprint reference designators"
msgstr "풋프린트 참조 지정자 검색"

#: pcbnew/dialogs/dialog_find_base.cpp:66
msgid "Search footprint values"
msgstr "풋프린트 값 검색"

#: pcbnew/dialogs/dialog_find_base.cpp:70
msgid "Search other text items"
msgstr "다른 텍스트 항목 검색"

#: pcbnew/dialogs/dialog_find_base.cpp:74
msgid "Search DRC markers"
msgstr "DRC 마커 검색"

#: pcbnew/dialogs/dialog_find_base.cpp:78
msgid "Search net names"
msgstr "네트 이름 검색"

#: pcbnew/dialogs/dialog_find_base.cpp:99
msgid "Restart Search"
msgstr "다시 검색"

#: pcbnew/dialogs/dialog_footprint_associations.cpp:48
msgid "Footprint: "
msgstr "풋프린트: "

#: pcbnew/dialogs/dialog_footprint_associations.cpp:97
msgid "Symbol:"
msgstr "심볼:"

#: pcbnew/dialogs/dialog_footprint_associations.cpp:98
msgid "Sheet: "
msgstr "시트: "

#: pcbnew/dialogs/dialog_footprint_associations_base.cpp:21
msgid "Library Association"
msgstr "라이브러리 연결"

#: pcbnew/dialogs/dialog_footprint_associations_base.cpp:62
msgid "Schematic Association"
msgstr "회로도 연결"

#: pcbnew/dialogs/dialog_footprint_associations_base.h:52
msgid "Footprint Associations"
msgstr "풋프린트 연결"

#: pcbnew/dialogs/dialog_footprint_checker.cpp:61
msgid "Run Checks"
msgstr "검사 실행"

#: pcbnew/dialogs/dialog_footprint_checker_base.h:69
#: pcbnew/tools/pcb_actions.cpp:778
msgid "Footprint Checker"
msgstr "풋프린트 검사기"

#: pcbnew/dialogs/dialog_footprint_chooser.cpp:35
msgid "Choose Footprint"
msgstr "풋프린트 선택"

#: pcbnew/dialogs/dialog_footprint_properties.cpp:75
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor.cpp:143
msgid "3D Models"
msgstr "3D 모델"

#: pcbnew/dialogs/dialog_footprint_properties.cpp:288
msgid ""
"Locked footprints cannot be freely moved and oriented on the canvas and can "
"only be selected when the 'Locked items' checkbox is checked in the "
"selection filter."
msgstr ""
"잠긴 풋프린트는 캔버스에서 자유롭게 이동하거나 방향을 바꿀 수 없으며, 선택 필"
"터에서 '잠긴 항목' 확인란이 선택된 경우에만 선택할 수 있습니다."

#: pcbnew/dialogs/dialog_footprint_properties.cpp:392
#, c-format
msgid "Text width must be at least %s."
msgstr "텍스트 너비는 %s 이상이어야 합니다."

#: pcbnew/dialogs/dialog_footprint_properties.cpp:405
#, c-format
msgid "Text width must be at most %s."
msgstr "텍스트 너비는 최대 %s여야 합니다."

#: pcbnew/dialogs/dialog_footprint_properties.cpp:419
#, c-format
msgid "Text height must be at least %s."
msgstr "텍스트 높이는 %s 이상이어야 합니다."

#: pcbnew/dialogs/dialog_footprint_properties.cpp:432
#, c-format
msgid "Text height must be at most %s."
msgstr "텍스트 높이는 최대 %s여야 합니다."

#: pcbnew/dialogs/dialog_footprint_properties.cpp:449
#, c-format
msgid ""
"Text thickness is too large for the text size.\n"
"It will be clamped at %s."
msgstr ""
"텍스트 크기에 비해 텍스트 두께가 너무 큽니다.\n"
"%s에서 고정됩니다."

#: pcbnew/dialogs/dialog_footprint_properties.cpp:583
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor.cpp:609
msgid "Modify footprint properties"
msgstr "풋프린트 속성 편집"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:53
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:53
#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:55
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:98
msgid "Text Items"
msgstr "텍스트 항목"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:61
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:54
#: pcbnew/fp_text_grid_table.cpp:146 pcbnew/pcb_text.cpp:569
#: pcbnew/pcb_text.cpp:586
msgid "Keep Upright"
msgstr "수직 유지"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:62
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:62
#: pcbnew/fp_text_grid_table.cpp:147
msgid "X Offset"
msgstr "X 오프셋"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:63
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:63
#: pcbnew/fp_text_grid_table.cpp:148
msgid "Y Offset"
msgstr "Y 오프셋"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:69
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:69
#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:66
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:56
#: pcbnew/plot_board_layers.cpp:86
msgid "Reference designator"
msgstr "참조 지정자"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:143
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:339
msgid "90"
msgstr "90"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:151
msgid "Side:"
msgstr "면:"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:185
#: pcbnew/footprint_libraries_utils.cpp:1204
msgid "Footprint type:"
msgstr "풋프린트 유형:"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:189
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:193
#: pcbnew/footprint.cpp:950 pcbnew/footprint_libraries_utils.cpp:1205
msgid "Through hole"
msgstr "스루홀"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:189
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:193
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:39 pcbnew/footprint.cpp:947
#: pcbnew/footprint_libraries_utils.cpp:1205 pcbnew/pad.cpp:1248
#: pcbnew/pad.cpp:1879
msgid "SMD"
msgstr "SMD"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:201
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:202
#: pcbnew/drc/drc_test_provider_library_parity.cpp:558
msgid "Not in schematic"
msgstr "회로도에 없음"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:204
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:205
#: pcbnew/drc/drc_test_provider_library_parity.cpp:562
msgid "Exclude from position files"
msgstr "부품 배치 파일에서 제외"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:210
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:211
msgid "Exempt from courtyard requirement"
msgstr "부품자리 요구 사항 면제"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:211
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:212
msgid "Will not generate \"missing courtyard\" DRC violations"
msgstr "\"누락된 부품자리\" DRC 위반을 생성하지 않습니다"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:230
msgid "Update Footprint from Library..."
msgstr "라이브러리에서 풋프린트 업데이트..."

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:233
#: pcbnew/tools/pcb_actions.cpp:808
msgid "Change Footprint..."
msgstr "풋프린트 변경..."

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:242
#: pcbnew/tools/pcb_actions.cpp:428
msgid "Edit Library Footprint..."
msgstr "라이브러리 풋프린트 편집..."

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:267
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:235
msgid "Clearances"
msgstr "클리어런스"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:269
msgid "Set values to 0 to use Board Setup values."
msgstr "보드 설정 값을 사용하려면 이 값을 0으로 설정하십시오."

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:279
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:247
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:949
msgid "Pad clearance:"
msgstr "패드 클리어런스:"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:281
msgid ""
"This is the local net clearance for all pad of this footprint\n"
"If 0, the Netclass values are used\n"
"This value can be superseded by a pad local value."
msgstr ""
"현재 풋프린트에 대한 모든 패드의 지역 네트 클리어런스 값을 의미합니다.\n"
"0으로 설정될 경우, 네트클래스 값이 사용됩니다.\n"
"이 값은 패드의 지역 값으로 대체될 수 있습니다."

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:292
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:260
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:962
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:54
msgid "Solder mask expansion:"
msgstr "솔더 마스크 확장:"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:294
msgid ""
"This is the local clearance between pads and the solder mask for this "
"footprint.\n"
"This value can be superseded by a pad local value.\n"
"If 0, the global value is used."
msgstr ""
"이 값은 해당 풋프린트의 패드와 솔더 마스크 간의 지역 클리어런스 값을 나타냅니"
"다.\n"
"이 값은 패드의 지역 값으로 대체될 수 있습니다.\n"
"0으로 설정될 경우, 전역 값이 적용됩니다."

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:305
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:273
#: pcbnew/drc/drc_test_provider_library_parity.cpp:554
msgid "Allow bridged solder mask apertures between pads"
msgstr "패드 사이에 브리지 솔더 마스크 구멍 허용"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:308
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:276
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:975
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:103
msgid "Solder paste absolute clearance:"
msgstr "솔더 페이스트의 절대 클리어런스:"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:310
msgid ""
"This is the local clearance between pads and the solder paste for this "
"footprint.\n"
"This value can be superseded by a pad local values.\n"
"The final clearance value is the sum of this value and the clearance value "
"ratio.\n"
"A negative value means a smaller stencil aperture size than pad size."
msgstr ""
"이 값은 해당 풋프린트의 패드와 솔더 페이스트 간의 지역 유격 값을 나타냅니"
"다.\n"
"이 값은 패드의 지역 값으로 대체될 수 있습니다.\n"
"최종 유격 값은 이 값과 유격 값의 비율의 합으로 결정됩니다.\n"
"값이 음수일 경우, 패드 크기보다 마스크 크기가 작음을 의미합니다."

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:321
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:289
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:988
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:118
msgid "Solder paste relative clearance:"
msgstr "솔더 페이스트의 상대 클리어런스:"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:323
#, c-format
msgid ""
"This is the local clearance ratio applied as a percentage of the pad width "
"and height for this footprint.\n"
"A value of 10 means the horizontal clearance value is 10% of the pad’s "
"width, and the vertical clearance value is 10% of the pad’s height.\n"
"This value can be superseded by a pad local value.\n"
"The final clearance value is the sum of this value and the absolute "
"clearance value.\n"
"A negative value means a smaller stencil aperture size than pad size."
msgstr ""
"이것은 이 풋프린트에 대한 패드 너비와 높이의 백분율로 적용된 로컬 유격 비율입"
"니다.\n"
"값이 10이면 수평 유격 값이 패드 너비의 10% o 이고 수직 유격 값이 패드 높이의 "
"10% o 임을 의미합니다.\n"
"이 값은 패드 로컬 값으로 대체될 수 있습니다.\n"
"최종 유격 값은 이 값과 절대 유격 값의 합입니다.\n"
"값이 음수일 경우, 패드 크기보다 마스크 크기가 작음을 의미합니다."

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:346
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:314
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1010
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1034
msgid ""
"Note: solder mask and paste values are used only for pads on copper layers."
msgstr "참고: 솔더 마스크와 페이스트의 값은 구리 레이어의 패드에만 이용됩니다."

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:350
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:318
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1014
msgid ""
"Note: solder paste clearances (absolute and relative) are added to determine "
"the final clearance."
msgstr ""
"참고: 솔더 페이스트 클리어런스는 (절대값이나 상대값 모두) 최종 클리어런스를 "
"결정하는 데에 더해져 사용됩니다."

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:358
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:326
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:827
msgid "Connection to Copper Zones"
msgstr "구리 영역 연결"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:360
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:328
msgid "Pad connection to zones:"
msgstr "영역과 패드 간 연결:"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:364
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:332
msgid "Use zone setting"
msgstr "영역 설정 사용"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:364
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:332
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:839
msgid "Thermal relief"
msgstr "단열판"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:377
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:399
msgid "Clearance Overrides and Settings"
msgstr "클리어런스 재정의 및 설정"

#: pcbnew/dialogs/dialog_footprint_properties_base.cpp:390
msgid ""
"The library ID and footprint ID currently assigned.  Use \"Change "
"Footprint...\" to assign a different footprint."
msgstr ""
"이미 할당된 라이브러리 ID와 풋프린트 ID 입니다.  \"풋프린트 바꾸기...\" 를 사"
"용하여 다른 풋프린트를 할당하세요."

#: pcbnew/dialogs/dialog_footprint_properties_base.h:122
#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.h:114
msgid "Footprint Properties"
msgstr "풋프린트 속성"

#: pcbnew/dialogs/dialog_footprint_properties_fp_editor.cpp:376
#: pcbnew/footprint_libraries_utils.cpp:1092
#: pcbnew/footprint_libraries_utils.cpp:1247
#: pcbnew/tools/footprint_editor_control.cpp:441
msgid "Footprint must have a name."
msgstr "풋프린트에는 이름이 있어야 합니다."

#: pcbnew/dialogs/dialog_footprint_properties_fp_editor.cpp:381
#, c-format
msgid "Footprint name may not contain '%s'."
msgstr "풋프린트 이름에는 '%s'이(가) 포함되지 않아야 합니다."

#: pcbnew/dialogs/dialog_footprint_properties_fp_editor.cpp:434
#, c-format
msgid "The text width must be between %s and %s."
msgstr "텍스트 너비는 %s와 %s 사이여야 합니다."

#: pcbnew/dialogs/dialog_footprint_properties_fp_editor.cpp:446
#, c-format
msgid "The text height must be between %s and %s."
msgstr "텍스트 높이는 %s와 %s 사이여야 합니다."

#: pcbnew/dialogs/dialog_footprint_properties_fp_editor.cpp:464
#: pcbnew/dialogs/dialog_text_properties.cpp:499
#: pcbnew/dialogs/dialog_textbox_properties.cpp:342
msgid ""
"The text thickness is too large for the text size.\n"
"It will be clamped."
msgstr ""
"텍스트의 굵기가 텍스트의 크기에 비해 너무 큽니다.\n"
"글씨가 깨질 수 있습니다."

#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:61
msgid "Unconstrained"
msgstr "제약 없음"

#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:107
msgid "Footprint name:"
msgstr "풋프린트 이름:"

#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:115
msgid "Description:"
msgstr "설명:"

#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:136
msgid "Private Layers"
msgstr "개인 레이어"

#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:189
msgid "Component type:"
msgstr "부품 유형:"

#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:237
msgid "Set values to 0 to use netclass values."
msgstr "네트클래스 값을 사용하려면 값을 0으로 설정하십시오."

#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:249
msgid ""
"This is the local net clearance for all pads of this footprint.\n"
"If 0, the Netclass values are used.\n"
"This value can be overridden on a pad-by-pad basis in the Local\n"
"Clearance and Settings tab of Pad Properties."
msgstr ""
"이 값은 해당 풋프린트의 모든 패드에 대한 지역 네트 클리어런스 값을 나타냅니"
"다.\n"
"0으로 설정할 경우, 네트클래스 값이 사용됩니다.\n"
"이 값은 패드 속성에 위치한 지역 클리어런스와 설정 탭에서\n"
"패드 단위로 재정의될 수 있습니다."

#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:262
msgid ""
"This is the local clearance between pads and the solder mask for \n"
"this footprint.\n"
"If 0, the global value is used.\n"
"This value can be overridden on a pad-by-pad basis in the Local\n"
"Clearance and Settings tab of Pad Properties."
msgstr ""
"이 값은 해당 풋프린트의 패드와 솔더 마스크 간 \n"
"지역 클리어런스 값을 나타냅니다.\n"
"0으로 설정할 경우, 전역 값이 사용됩니다.\n"
"이 값은 패드 속성에 위치한 지역 클리어런스와 설정 탭에서\n"
"패드 단위로 재정의될 수 있습니다."

#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:278
msgid ""
"This is the local clearance between pads and the solder paste for\n"
"this footprint.\n"
"The final clearance value is the sum of this value and the clearance value "
"ratio.\n"
"A negative value means a smaller stencil aperture size than pad size.\n"
"This value can be overridden on a pad-by-pad basis in the Local\n"
"Clearance and Settings tab of Pad Properties."
msgstr ""
"이 값은 해당 풋프린트의 패드와 솔더 페이스트 간 \n"
"지역 유격 값을 나타냅니다.\n"
"최종 유격 값은 이 값과 유격 값의 비율의 합으로 결정됩니다.\n"
"값이 음수일 경우, 패드 크기보다 마스크 크기가 작음을 의미합니다.\n"
"이 값은 패드 설정에 위치한 지역 유격과 설정 탭에서\n"
"패드 별로 재정의할 수 있습니다."

#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:291
#, c-format
msgid ""
"This is the local clearance ratio applied as a percentage of the pad width "
"and height for this footprint.\n"
"A value of 10 means the horizontal clearance value is 10% of the pad’s "
"width, and the vertical clearance value is 10% of the pad’s height.\n"
"The final clearance value is the sum of this value and the absolute "
"clearance value.\n"
"A negative value means a smaller stencil aperture size than pad size.\n"
"This value can be overridden on a pad-by-pad basis in the Local Clearance "
"and Settings tab of Pad Properties."
msgstr ""
"이것은 이 풋프린트에 대한 패드 너비와 높이의 백분율로 적용된 로컬 클리어런스 "
"비율입니다.\n"
"값이 10이면 수평 유격 값이 패드 너비의 10% o 이고 수직 클리어런스 값이 패드 "
"높이의 10% o 임을 의미합니다.\n"
"최종 유격 값은 이 값과 절대 유격 값의 합입니다.\n"
"값이 음수일 경우, 패드 크기보다 마스크 크기가 작음을 의미합니다.\n"
"이 값은 패드 속성의 로컬 유격 및 설정 탭에서 패드별로 재정의할 수 있습니다."

#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:342
msgid "Net Ties"
msgstr "네트 병합"

#: pcbnew/dialogs/dialog_footprint_properties_fp_editor_base.cpp:344
msgid "Pad groups allowed to short different nets:"
msgstr "패드 그룹은 다른 네트들을 단락 할 수 있습니다 :"

#: pcbnew/dialogs/dialog_footprint_wizard_list.cpp:153
msgid "All footprint generator scripts were loaded"
msgstr "모든 풋프린트 생성기 스크립트 불러오기 완료"

#: pcbnew/dialogs/dialog_footprint_wizard_list_base.cpp:65
msgid "Available Footprint Generators"
msgstr "사용가능한 풋프린트 생성기"

#: pcbnew/dialogs/dialog_footprint_wizard_list_base.cpp:70
msgid "Search paths:"
msgstr "경로 검색:"

#: pcbnew/dialogs/dialog_footprint_wizard_list_base.cpp:77
msgid "Not loadable python scripts:"
msgstr "불러올 수 없는 python 스크립트:"

#: pcbnew/dialogs/dialog_footprint_wizard_list_base.cpp:84
msgid "Show Trace"
msgstr "트레이스 표시"

#: pcbnew/dialogs/dialog_footprint_wizard_list_base.cpp:98
msgid "Update Python Modules"
msgstr "python 모듈 업데이트"

#: pcbnew/dialogs/dialog_footprint_wizard_list_base.h:65
msgid "Footprint Generators"
msgstr "풋프린트 생성기"

#: pcbnew/dialogs/dialog_footprint_wizard_list_base.h:85
msgid "Traceback of Python Script Errors"
msgstr "python 스크립트 오류에 대한 Traceback"

#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:312
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:444
#, c-format
msgid "Front (top side) placement file: '%s'."
msgstr "전면 (상단) 배치 파일: '%s'."

#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:315
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:337
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:448
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:494
#, c-format
msgid "Component count: %d."
msgstr "컴포넌트 수: %d."

#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:334
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:491
#, c-format
msgid "Back (bottom side) placement file: '%s'."
msgstr "후면 (바닥면) 배치 파일: '%s'."

#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:341
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:501
#, c-format
msgid "Full component count: %d."
msgstr "전체 컴포넌트 수: %d."

#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:344
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:453
#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:505
msgid "File generation successful."
msgstr "파일 생성 성공."

#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:370
msgid "No footprint for automated placement."
msgstr "자동 배치를 위한 풋프린트가 없습니다."

#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:442
#, c-format
msgid "Placement file: '%s'."
msgstr "배치 파일: '%s'."

#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:575
#, c-format
msgid ""
"Footprint report file created:\n"
"'%s'."
msgstr ""
"풋프린트 보고서 파일 생성:\n"
"'%s'."

#: pcbnew/dialogs/dialog_gen_footprint_position.cpp:576
msgid "Footprint Report"
msgstr "풋프린트 보고서"

#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:49
msgid "ASCII"
msgstr "ASCII"

#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:49
msgid "Gerber X3"
msgstr "거버 X3"

#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:61
msgid "Separate files for front, back"
msgstr "전면, 후면용 파일 분리"

#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:61
msgid "Single file for board"
msgstr "보드용 단일 파일"

#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:63
msgid "Files"
msgstr "파일"

#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:65
msgid ""
"Creates 2 files: one for each board side or\n"
"Creates only one file containing all footprints to place\n"
msgstr ""
"각 보드 면마다 하나씩 총 두 개의 파일을 생성하거나,\n"
"모든 배치된 풋프린트를 포함하는 단 하나의 파일을 생성합니다\n"

#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:75
msgid "Include only SMD footprints"
msgstr "SMD 풋프린트만 포함"

#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:78
msgid "Exclude all footprints with through hole pads"
msgstr "스루홀 패드가 있는 모든 풋프린트 제외"

#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:84
msgid "Include board edge layer"
msgstr "보드 에지 레이어 포함"

#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.cpp:90
msgid "Use negative X coordinates for footprints on bottom layer"
msgstr "하단 레이어의 풋 프린트에 음수 X 좌표 사용"

#: pcbnew/dialogs/dialog_gen_footprint_position_file_base.h:77
msgid "Generate Placement Files"
msgstr "부품 배치 파일 생성"

#: pcbnew/dialogs/dialog_gencad_export_options.cpp:41
msgid "Export to GenCAD settings"
msgstr "GenCAD 설정으로 내보내기"

#: pcbnew/dialogs/dialog_gencad_export_options.cpp:49
msgid "Select a GenCAD export filename"
msgstr "GenCAD로 내보낼 파일 이름 선택"

#: pcbnew/dialogs/dialog_gencad_export_options.cpp:136
msgid "Flip bottom footprint padstacks"
msgstr "풋프린트 패드스택의 바닥면 뒤집기"

#: pcbnew/dialogs/dialog_gencad_export_options.cpp:137
msgid "Generate unique pin names"
msgstr "고유한 핀 이름 생성"

#: pcbnew/dialogs/dialog_gencad_export_options.cpp:138
msgid "Generate a new shape for each footprint instance (do not reuse shapes)"
msgstr "각 풋프린트 인스턴스에 대하여 새로운 도형 생성 (도형 재사용 하지 않음)"

#: pcbnew/dialogs/dialog_gencad_export_options.cpp:139
msgid "Use drill/place file origin as origin"
msgstr "드릴/배치 파일 원점을 원점으로 사용"

#: pcbnew/dialogs/dialog_gencad_export_options.cpp:140
msgid "Save the origin coordinates in the file"
msgstr "원점 좌표를 파일에 저장"

#: pcbnew/dialogs/dialog_gendrill.cpp:76
msgid "Generate Drill File"
msgstr "드릴 파일 생성"

#: pcbnew/dialogs/dialog_gendrill.cpp:77
msgid "Generate Map File"
msgstr "맵 파일 생성"

#: pcbnew/dialogs/dialog_gendrill.cpp:407
#, c-format
msgid "Could not write drill and/or map files to folder '%s'."
msgstr "'%s' 폴더에 드릴 또는 맵 파일을 쓸 수 없습니다."

#: pcbnew/dialogs/dialog_gendrill.cpp:456
msgid "Save Drill Report File"
msgstr "드릴 기록 파일 저장"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:24
msgid "Output folder:"
msgstr "출력 폴더:"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:44
msgid "Drill File Format"
msgstr "드릴 파일 형식"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:46
msgid "Excellon"
msgstr "Excellon"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:53
msgid ""
"Not recommended.\n"
"Used mostly by users who make the boards themselves."
msgstr ""
"권장되지 않습니다.\n"
"주로 기판을 직접 제작하는 사용자들이 이용합니다."

#: pcbnew/dialogs/dialog_gendrill_base.cpp:58
msgid ""
"Not recommended.\n"
"Only use it for board houses which do not accept fully featured headers."
msgstr ""
"권장되지 않습니다.\n"
"모든 기능을 갖춘 헤더를 접수하지 않는 기판 제작 업체용으로만 사용하세요."

#: pcbnew/dialogs/dialog_gendrill_base.cpp:62
msgid "PTH and NPTH in single file"
msgstr "PTH와 NPTH를 하나의 파일로 합치기"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:63
msgid ""
"Not recommended.\n"
"Only use for board houses which ask for merged PTH and NPTH into a single "
"file."
msgstr ""
"권장되지 않습니다.\n"
"PTH와 NPTH를 하나의 파일로 합쳐 접수받는 기판 제작 업체용으로만 사용하세요."

#: pcbnew/dialogs/dialog_gendrill_base.cpp:67
msgid "Use route command (recommended)"
msgstr "라우트 명령어 사용 (권장)"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:67
msgid "Use alternate drill mode"
msgstr "대체 드릴 모드 사용"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:69
msgid "Oval Holes Drill Mode"
msgstr "타원 홀 드릴 모드"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:71
msgid ""
"Oval holes frequently create problems for board houses.\n"
"\"Use route command\" uses the usual G00 route command (recommended)\n"
" \"Use alternate mode\" uses another drill/ route command (G85)\n"
"(Use it only if the recommended command does not work)"
msgstr ""
"타원형 홀은 기판 제조 업체에 문제를 자주 일으킵니다.\n"
"\"라우트 명령어 사용\" 은 G00 라우트 명령어를 사용합니다 (권장합니다)\n"
"\"대체 모드\" 는 다른 드릴 / 라우트 명령어를 사용합니다 (G85)\n"
"(권장하는 명령어가 동작하지 않을 때만 사용하세요)"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:78
#: pcbnew/dialogs/dialog_gendrill_base.cpp:84
msgid "Gerber X2"
msgstr "거버 X2"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:84
msgid "PostScript"
msgstr "PostScript"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:86
msgid "Map File Format"
msgstr "맵 파일 형식"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:88
msgid "Creates a drill map in PDF or other formats"
msgstr "PDF 또는 다른 형식으로 드릴 맵 생성"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:98
msgid "Absolute"
msgstr "절대 경로"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:100
msgid "Drill Origin"
msgstr "드릴 원점"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:102
msgid ""
"Choose the coordinate origin: absolute or relative to the drill/place file "
"origin"
msgstr ""
"좌표 원점 선택: 드릴/배치 파일 원점에 대한 절대 또는 상대 좌표 원점 선택"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:108
msgid "Drill Units"
msgstr "드릴 단위"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:112
msgid "Decimal format (recommended)"
msgstr "십진수 형식 (권장)"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:112
msgid "Suppress leading zeros"
msgstr "앞 자리의 0 표시하지 않음"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:112
msgid "Suppress trailing zeros"
msgstr "뒷 자리의 0 표시하지 않음"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:112
msgid "Keep zeros"
msgstr "0 표시 유지"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:114
msgid "Zeros Format"
msgstr "0 표시 형식"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:116
msgid "Choose EXCELLON numbers notation"
msgstr "EXCELLON 수 표기법 선택"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:130 pcbnew/pcb_dimension.cpp:417
#: pcbnew/pcb_dimension.cpp:1475
msgid "Precision"
msgstr "정밀도"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:144
msgid "Hole Counts"
msgstr "홀 개수"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:151
msgid "Plated pads:"
msgstr "도금된 패드:"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:159
msgid "Non-plated pads:"
msgstr "도금되지 않은 패드:"

#: pcbnew/dialogs/dialog_gendrill_base.cpp:183
msgid "Buried vias:"
msgstr "숨겨진 비아:"

#: pcbnew/dialogs/dialog_generators_base.cpp:42
#, c-format
msgid "Generators A (%s)"
msgstr "생성기 A (%s)"

#: pcbnew/dialogs/dialog_generators_base.cpp:51
#, fuzzy
msgid "Rebuild selected"
msgstr "선택된 버스 없음"

#: pcbnew/dialogs/dialog_generators_base.cpp:54
#, fuzzy
msgid "Rebuild this type"
msgstr "로컬 연결선"

#: pcbnew/dialogs/dialog_generators_base.cpp:62
#, fuzzy
msgid "Rebuild All"
msgstr "모든 항목 교체"

#: pcbnew/dialogs/dialog_generators_base.h:63
#, fuzzy
msgid "Generator Objects"
msgstr "생성기 파일"

#: pcbnew/dialogs/dialog_get_footprint_by_name_base.cpp:28
#: pcbnew/dialogs/dialog_text_properties_base.cpp:67
msgid "Reference designator:"
msgstr "참조 지정자:"

#: pcbnew/dialogs/dialog_get_footprint_by_name_base.cpp:35
msgid "(specify multiple items separated by spaces for successive placement)"
msgstr "(연속 배치를 위해 공백으로 구분된 여러 항목을 지정)"

#: pcbnew/dialogs/dialog_get_footprint_by_name_base.cpp:39
msgid "Available footprints:"
msgstr "사용 가능한 풋프린트:"

#: pcbnew/dialogs/dialog_get_footprint_by_name_base.h:54
#: pcbnew/tools/pcb_actions.cpp:437
msgid "Get and Move Footprint"
msgstr "풋 프린트 가져오기 및 이동"

#: pcbnew/dialogs/dialog_global_deletion_base.cpp:23
msgid "Items to Delete"
msgstr "삭제할 항목"

#: pcbnew/dialogs/dialog_global_deletion_base.cpp:25
#: pcbnew/tools/board_editor_control.cpp:87
#: pcbnew/widgets/appearance_controls.cpp:330
#: pcbnew/widgets/panel_selection_filter.cpp:192
#: pcbnew/widgets/panel_selection_filter_base.cpp:53
#: pcbnew/widgets/search_handlers.cpp:138
msgid "Zones"
msgstr "영역"

#: pcbnew/dialogs/dialog_global_deletion_base.cpp:31
msgid "Board outlines"
msgstr "보드 외곽선"

#: pcbnew/dialogs/dialog_global_deletion_base.cpp:34
#: pcbnew/widgets/panel_selection_filter.cpp:191
#: pcbnew/widgets/panel_selection_filter_base.cpp:49
msgid "Graphics"
msgstr "그래픽"

#: pcbnew/dialogs/dialog_global_deletion_base.cpp:37
#: pcbnew/plot_board_layers.cpp:123
#: pcbnew/widgets/panel_selection_filter.cpp:186
#: pcbnew/widgets/panel_selection_filter_base.cpp:29
#: pcbnew/widgets/search_handlers.cpp:80
msgid "Footprints"
msgstr "풋프린트"

#: pcbnew/dialogs/dialog_global_deletion_base.cpp:40
msgid "Tracks && vias"
msgstr "배선 && 비아"

#: pcbnew/dialogs/dialog_global_deletion_base.cpp:46
msgid "Markers"
msgstr "마커"

#: pcbnew/dialogs/dialog_global_deletion_base.cpp:49
msgid "Clear board"
msgstr "보드 비우기"

#: pcbnew/dialogs/dialog_global_deletion_base.cpp:58
msgid "Filter Settings"
msgstr "설정 필터링"

#: pcbnew/dialogs/dialog_global_deletion_base.cpp:60
msgid "Locked graphics"
msgstr "잠긴 그래픽"

#: pcbnew/dialogs/dialog_global_deletion_base.cpp:63
msgid "Unlocked graphics"
msgstr "잠기지 않은 그래픽"

#: pcbnew/dialogs/dialog_global_deletion_base.cpp:66
msgid "Locked footprints"
msgstr "잠긴 풋프린트"

#: pcbnew/dialogs/dialog_global_deletion_base.cpp:69
msgid "Unlocked footprints"
msgstr "잠기지 않은 풋프린트"

#: pcbnew/dialogs/dialog_global_deletion_base.cpp:73
msgid "Locked tracks"
msgstr "잠긴 배선"

#: pcbnew/dialogs/dialog_global_deletion_base.cpp:76
msgid "Unlocked tracks"
msgstr "잠기지 않은 배선"

#: pcbnew/dialogs/dialog_global_deletion_base.cpp:87
msgid "Current layer only"
msgstr "현재 레이어만"

#: pcbnew/dialogs/dialog_global_deletion_base.cpp:89
msgid "Layer Filter"
msgstr "레이어 필터"

#: pcbnew/dialogs/dialog_global_deletion_base.cpp:105
msgid "Current layer:"
msgstr "현재 레이어:"

#: pcbnew/dialogs/dialog_global_deletion_base.h:72
msgid "Delete Items"
msgstr "항목 삭제"

#: pcbnew/dialogs/dialog_global_edit_teardrops.cpp:108
#, fuzzy
msgid "Set teardrops to default values for shape"
msgstr "기본값을 사용하려면 0으로 설정하십시오"

#: pcbnew/dialogs/dialog_global_edit_teardrops.cpp:109
#, fuzzy
msgid "Set teardrops to specified values:"
msgstr "지정된 값으로 설정:"

#: pcbnew/dialogs/dialog_global_edit_teardrops.cpp:113
#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:120
#, fuzzy
msgid "Add teardrops with default values for shape"
msgstr "모양에 대한 기본 값으로 눈물방울 추가"

#: pcbnew/dialogs/dialog_global_edit_teardrops.cpp:114
#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:129
#, fuzzy
msgid "Add teardrops with specified values:"
msgstr "지정된 값으로 설정:"

#: pcbnew/dialogs/dialog_global_edit_teardrops.cpp:483
#: pcbnew/dialogs/dialog_global_edit_teardrops.cpp:487
#: pcbnew/dialogs/dialog_global_edit_teardrops.cpp:491
#: pcbnew/dialogs/dialog_global_edit_teardrops.cpp:510
#, fuzzy
msgid "Edit Teardrops"
msgstr "눈물 방울 추가"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:27
#, fuzzy
msgid "PTH pads"
msgstr "%s의 NPTH 패드"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:31
msgid "SMD pads"
msgstr "SMD 패드"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:39
msgid "Track to track"
msgstr "트랙에서 트랙까지"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:46
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:39
msgid "Filter Items"
msgstr "항목 필터링"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:64
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:57
msgid "Filter items by net class:"
msgstr "네트 클래스로 항목 필터링:"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:78
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:67
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:71
msgid "Filter items by layer:"
msgstr "레이어별로 항목 필터링:"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:96
msgid "Round pads only"
msgstr "원형 패드만"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:99
msgid "Existing teardrops only"
msgstr "기존 티어드롭만 해당"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:114
msgid "Remove teardrops"
msgstr "눈물 방울 제거"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:123
msgid "Edit default values in Board Setup"
msgstr "보드 설정에서 기본값 수정"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:141
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:613
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:150
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:332
msgid "Prefer zone connection"
msgstr "선호 영역 연결"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:142
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:615
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:151
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:333
msgid ""
"Do not create teardrops on tracks connected to pads that are also connected "
"to a copper zone."
msgstr ""

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:146
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:619
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:380
#, fuzzy
msgid "Allow teardrops to span 2 track segments"
msgstr "티어 드롭이 두 트랙 세그먼트에 걸쳐 있도록 허용"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:147
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:621
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:381
msgid ""
"Allows a teardrop to spread over 2 tracks if the first track segment is too "
"short"
msgstr ""
"첫 번째 트랙 세그먼트가 너무 짧은 경우 눈물방울이 2개의 트랙에 퍼지도록 허용"
"함"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:163
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:637
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:397
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:155
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:337
#, fuzzy
msgid "Maximum track width:"
msgstr "최소 배선폭:"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:165
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:639
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:399
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:157
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:339
msgid ""
"Max pad/via size to track width ratio to create a teardrop.\n"
"100 always creates a teardrop."
msgstr ""
"최대 패드/비아 크기 대 트랙 너비 비율로 눈물 방울을 생성합니다.\n"
"100은 항상 눈물방울을 만듭니다."

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:170
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:163
msgid ""
"Tracks which are similar in size to the pad or via do not need teardrops."
msgstr "패드 또는 비아와 크기가 비슷한 트랙은 티어드롭이 필요하지 않습니다."

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:181
msgid "(as a percentage of pad/via size)"
msgstr "(패드/비아 크기의 백분율)"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:224
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:458
msgid "Best length:"
msgstr "최적 길이:"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:235
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:469
#, fuzzy
msgid "Maximum length:"
msgstr "최대 길이:"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:255
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:489
msgid "Best height:"
msgstr "최적 높이:"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:286
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:799
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:517
#, fuzzy
msgid "Curved edges"
msgstr "곡선"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.cpp:292
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:805
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:523
msgid "Points:"
msgstr "포인트:"

#: pcbnew/dialogs/dialog_global_edit_teardrops_base.h:108
#, fuzzy
msgid "Set Teardrops"
msgstr "눈물 방울 추가"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:138
msgid "Other text items"
msgstr "기타 텍스트 항목"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:139
msgid "Graphic items"
msgstr "그래픽 항목"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:140
#, fuzzy
msgid "Dimension items"
msgstr "치수선"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:258
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:183
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:60
msgid "Silk Layers"
msgstr "실크 레이어"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:259
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:184
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:61
msgid "Copper Layers"
msgstr "구리 레이어"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:260
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:185
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:62
msgid "Edge Cuts"
msgstr "기판 외형"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:261
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:186
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:63
msgid "Courtyards"
msgstr "부품자리"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:262
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:187
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:64
msgid "Fab Layers"
msgstr "Fab 레이어"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:263
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:188
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:65
msgid "Other Layers"
msgstr "기타 레이어"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:265
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:173
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:49
msgid "Line Thickness"
msgstr "선 굵기"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:273
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:174
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:50
#: pcbnew/pcb_dimension.cpp:431 pcbnew/pcb_textbox.cpp:369
msgid "Text Width"
msgstr "텍스트 너비"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:279
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:175
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:51
#: pcbnew/pcb_dimension.cpp:432 pcbnew/pcb_textbox.cpp:370
#: pcbnew/tools/board_inspection_tool.cpp:331
msgid "Text Height"
msgstr "텍스트 높이"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:285
#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:176
#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:52
#: pcbnew/pcb_dimension.cpp:430 pcbnew/pcb_textbox.cpp:368
#: pcbnew/tools/board_inspection_tool.cpp:346
msgid "Text Thickness"
msgstr "텍스트 두께"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:297
msgid "Upright"
msgstr "수직"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:341
#, fuzzy
msgid "Set to layer and dimension default values:"
msgstr "레이어 기본값으로 설정:"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp:343
#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:258
msgid "Set to layer default values:"
msgstr "레이어 기본값으로 설정:"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:34
msgid "Other footprint text items"
msgstr "기타 풋프린트 텍스트 항목"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:37
msgid "Footprint graphic items"
msgstr "풋프린트 그래픽 항목"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:40
#, fuzzy
msgid "Footprint dimension items"
msgstr "풋프린트 그래픽 항목"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:46
msgid "PCB graphic items"
msgstr "PCB 그래픽 항목"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:49
msgid "PCB text items"
msgstr "PCB 텍스트 항목"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:52
#, fuzzy
msgid "PCB dimension items"
msgstr "치수선"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:85
msgid "Filter items by parent footprint library id:"
msgstr "상위 풋프린트 라이브러리 ID로 항목 필터링:"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:112
#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:133
msgid "Set to specified values:"
msgstr "지정된 값으로 설정:"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:228
#: pcbnew/dialogs/dialog_text_properties_base.cpp:102
msgid "Keep upright"
msgstr "수직 방향 유지"

#: pcbnew/dialogs/dialog_global_edit_text_and_graphics_base.cpp:246
#, fuzzy
msgid "Center on footprint"
msgstr "상위 풋프린트"

#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:83
msgid "Filter tracks by width:"
msgstr "너비를 기준으로 트랙을 필터링함:"

#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:99
msgid "Filter vias by size:"
msgstr "크기별로 비아를 필터링함:"

#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:151
msgid "Via size:"
msgstr "비아 크기:"

#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.cpp:175
msgid "Set to net class / custom rule values"
msgstr "네트 클래스/사용자 지정 값으로 설정"

#: pcbnew/dialogs/dialog_global_edit_tracks_and_vias_base.h:83
msgid "Set Track and Via Properties"
msgstr "배선과 비아 속성 설정"

#: pcbnew/dialogs/dialog_global_fp_lib_table_config.cpp:31
#: pcbnew/drc/drc_engine.cpp:1428
msgid "footprint"
msgstr "풋프린트"

#: pcbnew/dialogs/dialog_global_fp_lib_table_config.cpp:60
#, c-format
msgid "Error occurred writing empty footprint library table '%s'."
msgstr ""
"빈 풋프린트 라이브러리 테이블 '%s'을(를) 쓰는 동안 오류가 발생했습니다."

#: pcbnew/dialogs/dialog_global_fp_lib_table_config.cpp:74
msgid "Please select a footprint library table file."
msgstr "풋프린트 라이브러리 테이블 파일을 선택하십시오."

#: pcbnew/dialogs/dialog_global_fp_lib_table_config.cpp:96
#, c-format
msgid "'%s' is not a valid footprint library table."
msgstr "'%s'은(는) 유효한 풋프린트 라이브러리 테이블이 아닙니다."

#: pcbnew/dialogs/dialog_global_fp_lib_table_config.cpp:107
#, c-format
msgid "Cannot create library table path '%s'."
msgstr "라이브러리 테이블 경로 '%s'을(를) 생성할 수 없습니다."

#: pcbnew/dialogs/dialog_global_fp_lib_table_config.cpp:115
#, c-format
msgid ""
"Cannot copy footprint library table from:\n"
"%s\n"
"to:\n"
"%s."
msgstr ""
"풋프린트 라이브러리 테이블을 복사할 수 없습니다:\n"
"%s\n"
"에서:\n"
"%s(으)로."

#: pcbnew/dialogs/dialog_global_fp_lib_table_config.cpp:134
msgid "Error loading footprint library table."
msgstr "풋프린트 라이브러리 테이블을 불러오는 중에 오류가 발생했습니다."

#: pcbnew/dialogs/dialog_group_properties.cpp:114
msgid "Modified group"
msgstr "수정된 그룹"

#: pcbnew/dialogs/dialog_group_properties_base.cpp:30
msgid "Group name:"
msgstr "그룹 이름:"

#: pcbnew/dialogs/dialog_group_properties_base.cpp:41
msgid "Prevents group from being moved on canvas"
msgstr "캔버스에서 개체가 움직이는 것을 방지"

#: pcbnew/dialogs/dialog_group_properties_base.cpp:45
msgid "Group members:"
msgstr "그룹 멤버:"

#: pcbnew/dialogs/dialog_group_properties_base.h:64
msgid "Group Properties"
msgstr "그룹 속성"

#: pcbnew/dialogs/dialog_import_netlist.cpp:81
msgid "Load and Test Netlist"
msgstr "네트리스트 로드 및 테스트"

#: pcbnew/dialogs/dialog_import_netlist.cpp:135
#: pcbnew/dialogs/dialog_import_netlist_base.h:70
msgid "Import Netlist"
msgstr "네트리스트 불러오기"

#: pcbnew/dialogs/dialog_import_netlist.cpp:160
msgid "Please choose a valid netlist file."
msgstr "유효한 네트리스트 파일을 선택하세요."

#: pcbnew/dialogs/dialog_import_netlist.cpp:166
#: pcbnew/dialogs/dialog_import_netlist.cpp:203
msgid "The netlist file does not exist."
msgstr "네트리스트 파일이 존재하지 않습니다."

#: pcbnew/dialogs/dialog_import_netlist.cpp:170
#: pcbnew/dialogs/dialog_update_pcb.cpp:146
msgid "Changes Applied to PCB"
msgstr "PCB에 변경점 반영됨"

#: pcbnew/dialogs/dialog_import_netlist.cpp:238
#, c-format
msgid "Reading netlist file '%s'.\n"
msgstr "'%s' 네트리스트 파일을 읽고 있습니다.\n"

#: pcbnew/dialogs/dialog_import_netlist.cpp:242
msgid "Using reference designators to match symbols and footprints.\n"
msgstr "참조 지정자를 사용하여 심볼과 풋프린트를 일치시킵니다.\n"

#: pcbnew/dialogs/dialog_import_netlist.cpp:244
msgid "Using tstamps (unique IDs) to match symbols and footprints.\n"
msgstr "tstamp (고유 ID) 를 사용하여 심볼과 풋프린트를 매칭합니다.\n"

#: pcbnew/dialogs/dialog_import_netlist_base.cpp:26
msgid "Netlist file:"
msgstr "네트리스트 파일:"

#: pcbnew/dialogs/dialog_import_netlist_base.cpp:42
msgid "Link footprints using component tstamps (unique ids)"
msgstr "컴포넌트의 tstamp (고유 ID) 를 사용하여 풋프린트를 연결"

#: pcbnew/dialogs/dialog_import_netlist_base.cpp:42
msgid "Link footprints using reference designators"
msgstr "참조 지정자를 이용하여 풋프린트 연결"

#: pcbnew/dialogs/dialog_import_netlist_base.cpp:44
msgid "Link Method"
msgstr "연결 방법"

#: pcbnew/dialogs/dialog_import_netlist_base.cpp:46
msgid ""
"Select whether to update footprint references to match their currently-"
"assigned symbols, or to re-assign footprints to symbols which match their "
"current references."
msgstr ""
"풋프린트 참조를 현재 할당된 심볼과 일치하도록 업데이트할 지, 풋프린트를 현재 "
"참조와 일치하도록 심볼에 재할당할 지 선택하세요."

#: pcbnew/dialogs/dialog_import_netlist_base.cpp:53
msgid "Replace footprints with those specified in netlist"
msgstr "네트리스트에 지정된 값으로 풋프린트 대체"

#: pcbnew/dialogs/dialog_import_netlist_base.cpp:56
msgid "Delete footprints with no components in netlist"
msgstr "네트리스트에 부품이 없는 풋프린트 삭제"

#: pcbnew/dialogs/dialog_import_netlist_base.cpp:59
msgid "Delete tracks shorting multiple nets"
msgstr "여러 네트를 단락시키는 배선 삭제"

#: pcbnew/dialogs/dialog_import_settings.cpp:47
#: pcbnew/dialogs/dialog_import_settings.cpp:100
msgid "Deselect All"
msgstr "모두 선택 해제"

#: pcbnew/dialogs/dialog_import_settings_base.cpp:51
msgid "Board layers and physical stackup"
msgstr "보드 레이어 및 물리적 스택업"

#: pcbnew/dialogs/dialog_import_settings_base.cpp:54
msgid "Solder mask/paste defaults"
msgstr "솔더 마스크/페이스트 기본값"

#: pcbnew/dialogs/dialog_import_settings_base.cpp:57
msgid "Text && graphics default properties"
msgstr "텍스트 및 그래픽 기본 속성"

#: pcbnew/dialogs/dialog_import_settings_base.cpp:60
msgid "Text && graphics formatting"
msgstr "텍스트 및 그래픽 서식"

#: pcbnew/dialogs/dialog_import_settings_base.cpp:63
msgid "Design rule constraints"
msgstr "디자인 규칙 제약"

#: pcbnew/dialogs/dialog_import_settings_base.cpp:66
msgid "Predefined track && via dimensions"
msgstr "사전 정의된 트랙 및 비아 치수"

#: pcbnew/dialogs/dialog_import_settings_base.cpp:69
msgid "Teardrop defaults"
msgstr "눈물방울 기본값"

#: pcbnew/dialogs/dialog_import_settings_base.cpp:72
msgid "Length-tuning pattern defaults"
msgstr "길이 조정 패턴 기본값"

#: pcbnew/dialogs/dialog_import_settings_base.cpp:78
msgid "Custom rules"
msgstr "사용자 정의 규칙"

#: pcbnew/dialogs/dialog_imported_layers.cpp:243
#: pcbnew/dialogs/dialog_imported_layers.cpp:251
msgid "Imported Layer"
msgstr "불러온 레이어"

#: pcbnew/dialogs/dialog_imported_layers.cpp:259
msgid "KiCad Layer"
msgstr "KiCad 레이어"

#: pcbnew/dialogs/dialog_imported_layers.cpp:339
msgid ""
"All required layers (marked with '*') must be matched. Please click on 'Auto-"
"Match Layers' to automatically match the remaining layers"
msgstr ""
"('*' 로 표시된) 모든 필수 레이어가 일치해야 합니다. 나머지 레이어를 자동으로 "
"일치시키려면 '레이어 자동 일치'를 클릭하세요"

#: pcbnew/dialogs/dialog_imported_layers.cpp:342
#: pcbnew/dialogs/dialog_imported_layers_base.cpp:22
msgid "Unmatched Layers"
msgstr "일치하지 않는 레이어"

#: pcbnew/dialogs/dialog_imported_layers_base.cpp:32
msgid "Imported Layers"
msgstr "불러온 레이어"

#: pcbnew/dialogs/dialog_imported_layers_base.cpp:36
msgid "KiCad Layers"
msgstr "KiCad 레이어"

#: pcbnew/dialogs/dialog_imported_layers_base.cpp:60
msgid "Add selected layers to matched layers list."
msgstr "일치하는 레이어 목록에 선택한 레이어를 추가합니다."

#: pcbnew/dialogs/dialog_imported_layers_base.cpp:65
msgid "Remove selected layers from matched layers list."
msgstr "일치한 레이어 목록 중 선택한 레이어를 삭제합니다."

#: pcbnew/dialogs/dialog_imported_layers_base.cpp:69
msgid "<<"
msgstr "<<"

#: pcbnew/dialogs/dialog_imported_layers_base.cpp:70
msgid "Remove all matched layers."
msgstr "일치하는 모든 레이어를 제거합니다."

#: pcbnew/dialogs/dialog_imported_layers_base.cpp:78
msgid "Matched Layers"
msgstr "일치하는 레이어"

#: pcbnew/dialogs/dialog_imported_layers_base.cpp:94
msgid "Auto-Match Layers"
msgstr "레이어 자동 일치"

#: pcbnew/dialogs/dialog_imported_layers_base.cpp:95
msgid "Automatically match any unmatched layers to their KiCad equivalent."
msgstr ""
"일치하지 않는 모든 레이어를 KiCad의 동등 레이어와 자동으로 일치시킵니다."

#: pcbnew/dialogs/dialog_imported_layers_base.h:65
msgid "Edit Mapping of Imported Layers"
msgstr "가져온 레이어의 매핑 편집"

#: pcbnew/dialogs/dialog_layer_selection_base.cpp:122
msgid "Top/Front layer:"
msgstr "상단/전면 레이어:"

#: pcbnew/dialogs/dialog_layer_selection_base.cpp:161
msgid "Bottom/Back layer:"
msgstr "하단/후면 레이어:"

#: pcbnew/dialogs/dialog_layer_selection_base.h:50
msgid "Select Layer"
msgstr "레이어 선택"

#: pcbnew/dialogs/dialog_layer_selection_base.h:79
msgid "Select Copper Layer Pair"
msgstr "구리 레이어 쌍 선택"

#: pcbnew/dialogs/dialog_move_exact.cpp:104
msgid "Rotate around item anchor"
msgstr "항목 앵커를 중심으로 회전"

#: pcbnew/dialogs/dialog_move_exact.cpp:107
msgid "Rotate around selection center"
msgstr "선택한 중심 주위로 회전"

#: pcbnew/dialogs/dialog_move_exact.cpp:110
#: pcbnew/dialogs/dialog_move_exact_base.cpp:69
msgid "Rotate around local coordinates origin"
msgstr "지역 좌표 원점을 중심으로 회전"

#: pcbnew/dialogs/dialog_move_exact.cpp:113
#: pcbnew/dialogs/dialog_move_exact_base.cpp:69
msgid "Rotate around drill/place origin"
msgstr "드릴/위치 원점을 중심으로 회전"

#: pcbnew/dialogs/dialog_move_exact.cpp:206
#: pcbnew/dialogs/dialog_position_relative.cpp:159
msgid "Distance:"
msgstr "거리:"

#: pcbnew/dialogs/dialog_move_exact.cpp:212
#: pcbnew/dialogs/dialog_move_exact_base.cpp:24
msgid "Move X:"
msgstr "X 이동:"

#: pcbnew/dialogs/dialog_move_exact.cpp:213
#: pcbnew/dialogs/dialog_move_exact_base.cpp:38
msgid "Move Y:"
msgstr "Y 이동:"

#: pcbnew/dialogs/dialog_move_exact.cpp:286
msgid ""
"Invalid movement values.  Movement would place selection outside of the "
"maximum board area."
msgstr "잘못된 이동 값입니다.  기판의 최대 영역보다 밖으로 이동할 수 없습니다."

#: pcbnew/dialogs/dialog_move_exact_base.cpp:52
msgid "Rotate:"
msgstr "회전:"

#: pcbnew/dialogs/dialog_move_exact_base.cpp:69
msgid "Rotate around center of selection"
msgstr "선택한 영역의 중심을 주위로 회전"

#: pcbnew/dialogs/dialog_move_exact_base.cpp:81
#: pcbnew/dialogs/dialog_position_relative_base.cpp:106
msgid "Use polar coordinates"
msgstr "극 좌표계 사용"

#: pcbnew/dialogs/dialog_move_exact_base.h:69
msgid "Move Item"
msgstr "항목 이동"

#: pcbnew/dialogs/dialog_net_inspector.cpp:984 pcbnew/netinfo_item.cpp:89
msgid "Net Code"
msgstr "네트 코드"

#: pcbnew/dialogs/dialog_net_inspector.cpp:986 pcbnew/netinfo_item.cpp:87
msgid "Net Name"
msgstr "네트 이름"

#: pcbnew/dialogs/dialog_net_inspector.cpp:988
msgid "Pad Count"
msgstr "패드 개수"

#: pcbnew/dialogs/dialog_net_inspector.cpp:990
msgid "Via Count"
msgstr "비아 개수"

#: pcbnew/dialogs/dialog_net_inspector.cpp:992
msgid "Via Length"
msgstr "비아 길이"

#: pcbnew/dialogs/dialog_net_inspector.cpp:994
msgid "Track Length"
msgstr "배선 길이"

#: pcbnew/dialogs/dialog_net_inspector.cpp:996
msgid "Die Length"
msgstr "다이 길이"

#: pcbnew/dialogs/dialog_net_inspector.cpp:998
msgid "Total Length"
msgstr "전체 길이"

#: pcbnew/dialogs/dialog_net_inspector.cpp:998 pcbnew/netinfo_item.cpp:133
msgid "Net Length"
msgstr "네트 길이"

#: pcbnew/dialogs/dialog_net_inspector.cpp:2079
#: pcbnew/dialogs/dialog_net_inspector.cpp:2136
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:52
msgid "Net name:"
msgstr "네트 이름:"

#: pcbnew/dialogs/dialog_net_inspector.cpp:2079
msgid "New Net"
msgstr "새 네트"

#: pcbnew/dialogs/dialog_net_inspector.cpp:2091
#: pcbnew/dialogs/dialog_net_inspector.cpp:2159
#, c-format
msgid "Net name '%s' is already in use."
msgstr "네트 이름 '%s'은(는) 이미 사용 중입니다."

#: pcbnew/dialogs/dialog_net_inspector.cpp:2136
msgid "Rename Net"
msgstr "네트 이름 바꾸기"

#: pcbnew/dialogs/dialog_net_inspector.cpp:2149
msgid "Net name cannot be empty."
msgstr "네트 이름은 빈 칸이 될 수 없습니다."

#: pcbnew/dialogs/dialog_net_inspector.cpp:2218
#, c-format
msgid "Net '%s' is in use.  Delete anyway?"
msgstr "네트 '%s'은(는) 사용 중입니다.  삭제할까요?"

#: pcbnew/dialogs/dialog_net_inspector.cpp:2259
#, c-format
msgid "Delete all nets in group '%s'?"
msgstr "그룹 '%s' 에 포함된 모든 네트를 삭제할까요?"

#: pcbnew/dialogs/dialog_net_inspector.cpp:2283
msgid "Report file"
msgstr "보고서 파일"

#: pcbnew/dialogs/dialog_net_inspector.cpp:2304
#, c-format
msgid "%s (%s)"
msgstr "%s (%s)"

#: pcbnew/dialogs/dialog_net_inspector_base.cpp:30
msgid "Net name filter:"
msgstr "네트 이름 필터 :"

#: pcbnew/dialogs/dialog_net_inspector_base.cpp:37
msgid "Show zero pad nets"
msgstr "패드가 0개인 네트 표시"

#: pcbnew/dialogs/dialog_net_inspector_base.cpp:41
msgid "Group by:"
msgstr "그룹화 기준:"

#: pcbnew/dialogs/dialog_net_inspector_base.cpp:47
#: pcbnew/dialogs/dialog_net_inspector_base.cpp:48
msgid "Wildcard"
msgstr "와일드카드"

#: pcbnew/dialogs/dialog_net_inspector_base.cpp:49
msgid "RegEx"
msgstr "정규표현"

#: pcbnew/dialogs/dialog_net_inspector_base.cpp:50
msgid "Wildcard Substr"
msgstr "와일드카드 부분 문자열"

#: pcbnew/dialogs/dialog_net_inspector_base.cpp:51
msgid "RegEx Substr"
msgstr "정규표현 부분 문자열"

#: pcbnew/dialogs/dialog_net_inspector_base.cpp:97
msgid "Create Report..."
msgstr "보고서 만들기..."

#: pcbnew/dialogs/dialog_net_inspector_base.h:72
#: pcbnew/tools/pcb_actions.cpp:1327
msgid "Net Inspector"
msgstr "네트 검사기"

#: pcbnew/dialogs/dialog_non_copper_zones_properties.cpp:127
msgid "Convert to Non Copper Zone"
msgstr "비 구리 영역으로 변환"

#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:55
msgid "Outline style:"
msgstr "외곽선 스타일:"

#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.cpp:145
msgid "degree"
msgstr "각도"

#: pcbnew/dialogs/dialog_non_copper_zones_properties_base.h:84
msgid "Non Copper Zone Properties"
msgstr "구리가 아닌 영역 속성"

#: pcbnew/dialogs/dialog_pad_properties.cpp:204
#: pcbnew/dialogs/dialog_pad_properties_base.h:285 pcbnew/pad.cpp:1949
msgid "Pad Properties"
msgstr "패드 속성"

#: pcbnew/dialogs/dialog_pad_properties.cpp:212
msgid "Default Pad Properties for Add Pad Tool"
msgstr "패드 도구 추가를 위한 기본 패드 속성"

#: pcbnew/dialogs/dialog_pad_properties.cpp:552
#, c-format
msgid "Footprint %s (%s), %s, rotated %g deg"
msgstr "풋프린트 %s (%s), %s, 회전 %g deg"

#: pcbnew/dialogs/dialog_pad_properties.cpp:555
#: pcbnew/dialogs/dialog_text_properties.cpp:311
msgid "back side (mirrored)"
msgstr "후면 (미러 처리됨)"

#: pcbnew/dialogs/dialog_pad_properties.cpp:555
#: pcbnew/dialogs/dialog_text_properties.cpp:312
msgid "front side"
msgstr "전면"

#: pcbnew/dialogs/dialog_pad_properties.cpp:901
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:325
msgid "All copper layers"
msgstr "모든 구리 레이어"

#: pcbnew/dialogs/dialog_pad_properties.cpp:902
#, c-format
msgid "%s, %s and connected layers"
msgstr "%s, %s 및 연결된 레이어"

#: pcbnew/dialogs/dialog_pad_properties.cpp:905
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:325
msgid "Connected layers only"
msgstr "연결된 레이어만"

#: pcbnew/dialogs/dialog_pad_properties.cpp:910 pcbnew/zone.cpp:603
#, c-format
msgid "%s and %s"
msgstr "%s와%s"

#: pcbnew/dialogs/dialog_pad_properties.cpp:1230
#: pcbnew/dialogs/dialog_pad_properties.cpp:1235
msgid "Error: Pad must have a positive size."
msgstr "오류: 패드의 크기는 양수여야 합니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1249
msgid "Warning: Pad hole not inside pad shape."
msgstr "경고: 패드 구멍이 패드 모양 안에 있지 않습니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1262
msgid "Warning: Pad hole will leave no copper."
msgstr "주의: 패드 구멍에 구리가 놓여있지 않습니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1267
msgid "Warning: Negative local clearance values will have no effect."
msgstr "경고: 음수 지역 클리어런스 값은 아무런 효과가 없습니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1284
msgid ""
"Warning: Negative solder mask clearances larger than some shape primitives. "
"Results may be surprising."
msgstr ""
"경고: 음수 솔더 마스크 클리어런스 값이 도형 기본 요소보다 큽니다. 뜻밖의 결과"
"가 나올 수 있습니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1293
msgid ""
"Warning: Negative solder mask clearance larger than pad. No solder mask will "
"be generated."
msgstr ""
"경고: 음수 솔더 마스크 클리어런스 값이 패드 값보다 더 큽니다. 솔더 마스크는 "
"생성되지 않습니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1312
msgid ""
"Warning: Negative solder paste margins larger than pad. No solder paste mask "
"will be generated."
msgstr ""
"경고: 음수 솔더 페이스트 간격이 패드 값보다 더 큽니다. 솔더 페이스트 마스크"
"는 생성되지 않습니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1319
msgid "Error: pad has no layer."
msgstr "오류: 패드에 레이어가 없습니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1325
msgid ""
"Warning: Plated through holes should normally have a copper pad on at least "
"one layer."
msgstr ""
"경고: 도금된 스루홀은 보통 적어도 한 층 이상의 구리 패드가 있어야 합니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1331
msgid "Error: Trapazoid delta is too large."
msgstr "오류: Trapazoid delta가 너무 큽니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1340
msgid "Error: Through hole pad has no hole."
msgstr "오류: 관통 구멍 패드에 구멍이 없습니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1347
msgid ""
"Warning: Connector pads normally have no solder paste. Use a SMD pad instead."
msgstr ""
"주의: 커넥터 패드는 일반적으로 솔더 페이스트가 없습니다. SMD 패드를 대신 사용"
"하세요."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1356
msgid "Error: SMD pad has a hole."
msgstr "오류: SMD 패드에 구멍이 있습니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1362
msgid "Warning: SMD pad has no outer layers."
msgstr "경고: SMD 패드에는 외부 레이어가 없습니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1370
msgid "Warning: Fiducial property makes no sense on NPTH pads."
msgstr "경고: NPTH 패드에서 기준점 속성은 의미가 없습니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1376
msgid "Warning: Testpoint property makes no sense on NPTH pads."
msgstr "경고: NPTH 패드에서 테스트포인트 속성은 의미가 없습니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1382
msgid "Warning: Heatsink property makes no sense of NPTH pads."
msgstr "경고: NPTH 패드에서 히트 싱크 속성은 의미가 없습니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1388
msgid "Warning: Castellated property is for PTH pads."
msgstr "경고: 카스텔레이티드 속성은 PTH 패드 전용입니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1394
msgid "Warning: BGA property is for SMD pads."
msgstr "경고: BGA 속성은 SMD 패드 전용입니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1403
msgid "Error: Negative corner size."
msgstr "오류: 모서리 크기가 음수입니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1405
msgid "Warning: Corner size will make pad circular."
msgstr "경고: 모서리 크기는 패드를 둥글게 만듭니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1415
msgid "Error: Custom pad shape must resolve to a single polygon."
msgstr "오류: 사용자 정의 패드 형상은 하나의 다각형으로 완성되어야 합니다."

#: pcbnew/dialogs/dialog_pad_properties.cpp:1421
msgid "Pad Properties Errors"
msgstr "패드 속성 오류"

#: pcbnew/dialogs/dialog_pad_properties.cpp:1422
msgid "Pad Properties Warnings"
msgstr "패드 속성 경고"

#: pcbnew/dialogs/dialog_pad_properties.cpp:1628
msgid "Modify pad"
msgstr "패드 수정"

#: pcbnew/dialogs/dialog_pad_properties.cpp:1661
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:371
msgid "Hole size X:"
msgstr "홀 크기 X:"

#: pcbnew/dialogs/dialog_pad_properties.cpp:1676
#: pcbnew/dialogs/dialog_pad_properties.cpp:1677
#: pcbnew/dialogs/dialog_pad_properties.cpp:1678
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:653
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:721
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:769
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:79
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:119
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:175
msgid "d"
msgstr "d"

#: pcbnew/dialogs/dialog_pad_properties.cpp:1682
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:311
msgid "Pad size X:"
msgstr "패드 사이즈 X:"

#: pcbnew/dialogs/dialog_pad_properties.cpp:1685
#: pcbnew/dialogs/dialog_pad_properties.cpp:1686
#: pcbnew/dialogs/dialog_pad_properties.cpp:1687
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:261
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:301
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:357
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:443
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:483
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:534
msgid "w"
msgstr "w"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:35
msgid "Pad type:"
msgstr "패드 형식:"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:39 pcbnew/pad.cpp:1878
msgid "Through-hole"
msgstr "스루홀"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:39
msgid "Edge Connector"
msgstr "에지 커넥터"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:39
msgid "NPTH, Mechanical"
msgstr "NPTH, 기계"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:39
msgid "SMD Aperture"
msgstr "SMD 조리개"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:45
msgid "Pad number:"
msgstr "패드 번호 :"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:95
msgid "Pad shape:"
msgstr "패드 형태:"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:99
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:365
msgid "Circular"
msgstr "원형"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:99
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:365 pcbnew/pad.cpp:1232
#: pcbnew/pad.cpp:1886
msgid "Oval"
msgstr "타원형"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:99
msgid "Rectangular"
msgstr "직사각형"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:99
msgid "Trapezoidal"
msgstr "사다리꼴"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:99 pcbnew/pad.cpp:1888
msgid "Rounded rectangle"
msgstr "모서리가 둥근 사각형"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:99 pcbnew/pad.cpp:1889
msgid "Chamfered rectangle"
msgstr "모따기 사각형"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:99
msgid "Chamfered with other corners rounded"
msgstr "다른 모서리를 둥글게 하여 모따기"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:99
msgid "Custom (circular base)"
msgstr "사용자 정의 (원형 베이스)"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:99
msgid "Custom (rectangular base)"
msgstr "사용자 정의 (사각형 베이스)"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:114
msgid "Trapezoid delta:"
msgstr "사다리꼴 델타:"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:125
msgid "Trapezoid axis:"
msgstr "사다리꼴 축:"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:146
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:284
msgid "Corner size:"
msgstr "모서리 크기:"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:148
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:286
msgid ""
"Corner radius in percent  of the pad width.\n"
"The width is the smaller value between size X and size Y.\n"
"The max value is 50 percent."
msgstr ""
"모서리 반경은 패드 폭에 대한 백분율로 표현됩니다.\n"
"사이즈 X와 Y 중 작은 값이 폭이 됩니다.\n"
"최대값은 50 퍼센트 입니다."

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:159
msgid "Corner radius:"
msgstr "모서리 반경:"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:161
msgid ""
"Corner radius.\n"
"Can be no more than half pad width.\n"
"The width is the smaller value between size X and size Y.\n"
"Note: IPC norm gives a max value = 0.25mm."
msgstr ""
"모서리 반경.\n"
"패드 폭의 절반 이상이 되면 안 됩니다.\n"
"사이즈 X와 Y 중 작은 값이 폭이 됩니다.\n"
"참고: IPC 기준에 의하면 최대치는 0.25mm입니다."

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:184
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:240
msgid "Chamfer size:"
msgstr "모따기 크기:"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:186
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:242
msgid ""
"Chamfer size in percent of the pad width.\n"
"The width is the smaller value between size X and size Y.\n"
"The max value is 50 percent."
msgstr ""
"모따기 크기는 패드 폭에 대한 백분율로 표현됩니다.\n"
"사이즈 X와 Y 중 작은 값이 폭이 됩니다.\n"
"최대값은 50 퍼센트 입니다."

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:203
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:259
msgid "Chamfer corners:"
msgstr "모따기 모서리:"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:205
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:261
msgid ""
"Chamfered corners. The position is relative to a pad orientation 0 degree."
msgstr "모따기된 모서리. 위치는 방향이 0도인 패드에 상대적입니다."

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:212
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:268
msgid "Top left"
msgstr "왼쪽 상단"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:216
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:272
msgid "Top right"
msgstr "오른쪽 상단"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:219
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:275
msgid "Bottom left"
msgstr "왼쪽 하단"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:222
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:278
msgid "Bottom right"
msgstr "오른쪽 하단"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:361
msgid "Hole shape:"
msgstr "구멍 모양:"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:402
msgid "Offset shape from hole"
msgstr "홀에서의 오프셋 형상"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:458
msgid "Specify pad to die length"
msgstr "다이 길이에 맞는 패드 지정"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:493
msgid ""
"Parent footprint on board is flipped.\n"
"Layers will be reversed."
msgstr ""
"보드의 상위 풋프린트가 뒤집어집니다.\n"
"레이어가 반전됩니다."

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:513
msgid "Front adhesive"
msgstr "전면 접착면"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:516
msgid "Back adhesive"
msgstr "후면 접착면"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:519
msgid "Front solder paste"
msgstr "전면 솔더 페이스트"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:522
msgid "Back solder paste"
msgstr "후면 솔더 페이스트"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:528
msgid "Back silk screen"
msgstr "후면 실크 스크린"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:534
msgid "Back solder mask"
msgstr "후면 솔더 마스크"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:537
msgid "Drafting notes"
msgstr "초안"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:540
msgid "E.C.O.1"
msgstr "E.C.O.1"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:543
msgid "E.C.O.2"
msgstr "E.C.O.2"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:549
msgid "Fabrication property:"
msgstr "제작 속성:"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:551
msgid ""
"Optional property to specify a special purpose or constraint in fabrication "
"files:\n"
"BGA attribute is for pads in BGA footprints\n"
"Fiducial local is a fiducial for the parent footprint\n"
"Fiducial global is a fiducial for the whole board\n"
"Test Point pad  is useful to specify test points in Gerber files\n"
"Heatsink pad  specify a thermal pad\n"
"Castellated specify castellated through hole pads on a board edge\n"
"These properties are specified in Gerber X2  files."
msgstr ""
"특수한 목적 또는 제약을 위해 기판 제조 파일에 추가할 수 있는 속성들:\n"
"BGA 속성은 BGA 풋프린트 패드용입니다\n"
"지역 기준은 상위 풋프린트에 대한 기준입니다\n"
"전역 기준은 전체 기판에 대한 기준입니다\n"
"테스트 포인트 패드는 거버 파일에서 테스트 포인트를 지정할 때 유용합니다\n"
"방열 패드는 단열 패드를 지정합니다\n"
"카스텔레이티드는 기판 가장자리의 단면에 위치한 성곽형 스루홀 패드를 지정합니"
"다\n"
"이러한 속성들은 거버 X2 파일에 지정되어 있습니다."

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:558 pcbnew/pad.cpp:1894
msgid "BGA pad"
msgstr "BGA 패드"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:558 pcbnew/pad.cpp:1896
msgid "Fiducial, local to footprint"
msgstr "풋프린트의 지역 기준"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:558 pcbnew/pad.cpp:1895
msgid "Fiducial, global to board"
msgstr "기판의 전역 기준"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:558 pcbnew/pad.cpp:1897
msgid "Test point pad"
msgstr "테스트 포인트 패드"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:558 pcbnew/pad.cpp:1898
msgid "Heatsink pad"
msgstr "히트 싱크 패드"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:558
msgid "Castellated pad (through hole only)"
msgstr "카스텔레이티드 패드 (스루홀 전용)"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:590
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:351
msgid "Board contains legacy teardrops."
msgstr "보드에는 기존 티어드롭이 포함되어 있습니다."

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:594
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:355
msgid "Use Edit > Edit Teardrops to apply automatic teardrops."
msgstr "자동 눈물 방울을 적용하려면 편집 > 티어드롭 편집을 사용합니다."

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:610
msgid "Add teardrops on pad's track connections"
msgstr "패드의 트랙 연결부에 눈물방울 추가하기"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:645
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:345
msgid "Tracks which are similar in size to the pad do not need teardrops."
msgstr "패드와 크기가 비슷한 트랙은 티어드롭이 필요하지 않습니다."

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:649
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:717
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:765
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:74
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:114
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:170
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:256
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:296
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:352
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:438
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:478
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:529
msgid "%("
msgstr "%("

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:659
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:727
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:775
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:85
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:125
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:181
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:267
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:307
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:363
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:449
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:489
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:540
msgid " )"
msgstr " )"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:675
msgid "Teardrop Shape"
msgstr "눈물방울 모양"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:706
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:63
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:245
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:427
msgid "Best length (L):"
msgstr "최적 길이(L):"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:734
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:92
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:274
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:456
msgid "Maximum length (L):"
msgstr "최대 길이:"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:754
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:103
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:285
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:467
msgid "Best width (W):"
msgstr "최적 너비(W):"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:782
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:132
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:314
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:496
msgid "Maximum width (W):"
msgstr "최대 너비(W):"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:835
msgid "Pad connection:"
msgstr "패드 연결:"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:839
msgid "From parent footprint"
msgstr "상위 풋프린트에서"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:845
msgid "Zone knockout:"
msgstr "영역 밑색빼기:"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:849
msgid "Pad shape"
msgstr "패드 모양"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:849
msgid "Pad convex hull"
msgstr "패드 볼록 선체"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:862
msgid "Thermal Relief Overrides"
msgstr "단열판 재정의"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:870
msgid "Relief gap:"
msgstr "단열판 간격:"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:881
msgid "Spoke width:"
msgstr "스포크 너비:"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:892
msgid "Spoke angle:"
msgstr "스포크 각도:"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:928
#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1056
msgid "Clearance Overrides"
msgstr "클리어런스 재정의"

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:931
msgid "Set values to 0 to use parent footprint or netclass values."
msgstr ""
"상위 풋프린트나 네트클래스 값을 사용하기 위해선 해당 값을 0으로 설정하세요."

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:935
msgid ""
"Positive clearance means area bigger than the pad (usual for mask clearance)."
msgstr ""
"클리어런스 값이 양수일 경우, 패드보다 넓은 면적을 의미합니다 (일반적으로 마스"
"크 클리어런스)."

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:939
msgid ""
"Negative clearance means area smaller than the pad (usual for paste "
"clearance)."
msgstr ""
"클리어런스 값이 음수일 경우, 패드보다 작은 면적을 의미합니다 (일반적으로 페이"
"스트 클리어런스)."

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:951
msgid ""
"This is the local net clearance for this pad.\n"
"If 0, the footprint local value or the Netclass value is used."
msgstr ""
"이 값은 현재 패드에 대한 지역 네트 클리어런스 값입니다.\n"
"0으로 설정될 경우, 풋프린트 지역 값 또는 네트클래스 값이 사용됩니다."

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:964
msgid ""
"This is the local clearance between this pad and the solder mask.\n"
"If 0, the footprint local value or the global value is used."
msgstr ""
"이 값은 현재 패드와 솔더 마스크 간의 지역 클리어런스 값입니다.\n"
"0으로 설정될 경우, 풋프린트 지역 값 또는 전역 값이 사용됩니다."

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:977
msgid ""
"This is the local clearance between this pad and the solder paste.\n"
"If 0, the footprint value or the global value is used.\n"
"The final clearance value is the sum of this value and the clearance value "
"ratio.\n"
"A negative value means a smaller mask size than pad size."
msgstr ""
"이 값은 해당 패드와 솔더 페이스트 간 지역 클리어런스 값을 나타냅니다.\n"
"값이 0일 경우, 풋프린트 값 또는 전역 값이 사용됩니다.\n"
"최종 클리어런스 값은 이 값과 클리어런스 값의 비율의 합으로 결정됩니다.\n"
"값이 음수일 경우, 패드 크기보다 마스크 크기가 작음을 의미합니다."

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:990
msgid ""
"This is the local clearance ratio in percent between this pad and the solder "
"paste.\n"
"A value of 10 means the clearance value is 10 percent of the pad size.\n"
"If 0, the footprint value or the global value is used.\n"
"The final clearance value is the sum of this value and the clearance value.\n"
"A negative value means a smaller mask size than pad size."
msgstr ""
"이 값은 해당 패드와 솔더 페이스트 간의 지역 클리어런스 값을 백분율로 나타냅니"
"다.\n"
"값이 10일 경우, 클리어런스 값은 패드 크기의 10 퍼센트라는 의미입니다.\n"
"값이 0일 경우, 풋프린트 값 또는 전역 값이 사용됩니다.\n"
"최종 클리어런스 값은 이 값과 클리어런스 값의 합으로 결정됩니다.\n"
"값이 음수일 경우, 패드 크기보다 마스크 크기가 작음을 의미합니다."

#: pcbnew/dialogs/dialog_pad_properties_base.cpp:1193
msgid "Preview pad in sketch mode"
msgstr "스케치 모드에서 패드 미리보기"

#: pcbnew/dialogs/dialog_plot.cpp:141
msgid "Plot on All Layers"
msgstr "모든 레이어에 플롯"

#: pcbnew/dialogs/dialog_plot.cpp:170
msgid "Move current selection up"
msgstr "현재 선택을 위로 이동"

#: pcbnew/dialogs/dialog_plot.cpp:177
msgid "Move current selection down"
msgstr "현재 선택을 아래로 이동"

#: pcbnew/dialogs/dialog_plot.cpp:189
msgid "Generate Drill Files..."
msgstr "드릴 파일 생성..."

#: pcbnew/dialogs/dialog_plot.cpp:474
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:291
msgid "Select Fab Layers"
msgstr "Fab 레이어 선택"

#: pcbnew/dialogs/dialog_plot.cpp:477
#, fuzzy
msgid "Select All Copper Layers"
msgstr "모든 구리 레이어 선택"

#: pcbnew/dialogs/dialog_plot.cpp:478
#, fuzzy
msgid "Deselect All Copper Layers"
msgstr "모든 구리 레이어 선택 취소"

#: pcbnew/dialogs/dialog_plot.cpp:481 pcbnew/dialogs/dialog_plot.cpp:546
#, fuzzy
msgid "Select All Layers"
msgstr "모든 레이어 선택"

#: pcbnew/dialogs/dialog_plot.cpp:482 pcbnew/dialogs/dialog_plot.cpp:547
#, fuzzy
msgid "Deselect All Layers"
msgstr "모든 레이어 선택 해제"

#: pcbnew/dialogs/dialog_plot.cpp:550
#, fuzzy
msgid "Order as Board Stackup"
msgstr "보드 스택업"

#: pcbnew/dialogs/dialog_plot.cpp:952
msgid "HPGL pen size constrained."
msgstr "HPGL 펜 크기는 제한되어 있습니다."

#: pcbnew/dialogs/dialog_plot.cpp:970
msgid "X scale constrained."
msgstr "X 배율은 고정되어 있습니다."

#: pcbnew/dialogs/dialog_plot.cpp:982
msgid "Y scale constrained."
msgstr "Y 배율은 고정되어 있습니다."

#: pcbnew/dialogs/dialog_plot.cpp:998
#, c-format
msgid ""
"Width correction constrained.  The width correction value must be in the "
"range of [%s; %s] for the current design rules."
msgstr ""
"너비 보정이 제한되어있음. 현재 디자인 규칙의 너비 보정 값은 [%s; %s] 범위에 "
"있어야 합니다."

#: pcbnew/dialogs/dialog_plot.cpp:1099
msgid "No layer selected, Nothing to plot"
msgstr "선택한 레이어가 없습니다. 아무것도 플롯하지 않았습니다"

#: pcbnew/dialogs/dialog_plot.cpp:1164
msgid "Warning: Scale option set to a very small value"
msgstr "경고: 배율 옵션이 매우 작은 값으로 설정됨"

#: pcbnew/dialogs/dialog_plot.cpp:1167
msgid "Warning: Scale option set to a very large value"
msgstr "경고: 배율 옵션이 매우 큰 값으로 설정됨"

#: pcbnew/dialogs/dialog_plot_base.cpp:24
msgid "Plot format:"
msgstr "플롯 유형:"

#: pcbnew/dialogs/dialog_plot_base.cpp:28
#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:38
msgid "Gerber"
msgstr "거버"

#: pcbnew/dialogs/dialog_plot_base.cpp:54
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:279
msgid "Include Layers"
msgstr "레이어 포함"

#: pcbnew/dialogs/dialog_plot_base.cpp:80
msgid "Plot footprint values"
msgstr "풋프린트 값 플롯"

#: pcbnew/dialogs/dialog_plot_base.cpp:84
msgid "Plot reference designators"
msgstr "참조 지정자를 플롯"

#: pcbnew/dialogs/dialog_plot_base.cpp:88
#, fuzzy
msgid "Plot footprint text"
msgstr "풋프린트 값 플롯"

#: pcbnew/dialogs/dialog_plot_base.cpp:92
msgid "Force plotting of invisible values / refs"
msgstr "비표시 값/참조 강제 플롯"

#: pcbnew/dialogs/dialog_plot_base.cpp:93
msgid "Force plot invisible footprint values and reference designators"
msgstr "보이지 않는 풋프린트 값과 참조 지정자를 강제로 플롯"

#: pcbnew/dialogs/dialog_plot_base.cpp:97
msgid "Sketch pads on fabrication layers"
msgstr "제작 층의 패드 그리기"

#: pcbnew/dialogs/dialog_plot_base.cpp:98
msgid "Include pad outlines on F.Fab and B.Fab layers when plotting"
msgstr "플롯 시, F.Fab 레이어와 B.Fab 레이어에 패드 외곽선을 포함"

#: pcbnew/dialogs/dialog_plot_base.cpp:102
msgid "Check zone fills before plotting"
msgstr "플로팅 전에 채워진 영역을 체크"

#: pcbnew/dialogs/dialog_plot_base.cpp:105
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:98
msgid "Tent vias"
msgstr "텐트 비아"

#: pcbnew/dialogs/dialog_plot_base.cpp:106
#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:99
msgid ""
"Tented vias: not plotted on soldermask layer\n"
"Not tented: vias are plotted on soldermask layer\n"
"(Solder mask is a negative layer)"
msgstr ""
"텐트형 비아: 솔더마스크 레이어에 플롯되지 않음\n"
"텐트되지 않음: 비아가 솔더마스크 레이어에 표시됨\n"
"(솔더 마스크는 네거티브 레이어)"

#: pcbnew/dialogs/dialog_plot_base.cpp:110
#: pcbnew/dialogs/dialog_print_pcbnew.cpp:242
msgid "Drill marks:"
msgstr "드릴 표시:"

#: pcbnew/dialogs/dialog_plot_base.cpp:114
msgid "Actual size"
msgstr "실제 크기"

#: pcbnew/dialogs/dialog_plot_base.cpp:120
msgid "Scaling:"
msgstr "배율:"

#: pcbnew/dialogs/dialog_plot_base.cpp:124
msgid "3:2"
msgstr "3:2"

#: pcbnew/dialogs/dialog_plot_base.cpp:124
msgid "2:1"
msgstr "2:1"

#: pcbnew/dialogs/dialog_plot_base.cpp:124
msgid "3:1"
msgstr "3:1"

#: pcbnew/dialogs/dialog_plot_base.cpp:130
msgid "Plot mode:"
msgstr "플롯 모드:"

#: pcbnew/dialogs/dialog_plot_base.cpp:134
msgid "Sketch"
msgstr "스케치"

#: pcbnew/dialogs/dialog_plot_base.cpp:141
msgid ""
"Use the drill/place file origin as the coordinate origin for plotted files"
msgstr "드릴/배치 파일 원점을 플롯한 파일의 좌표 원점으로 사용"

#: pcbnew/dialogs/dialog_plot_base.cpp:145
msgid "Mirrored plot"
msgstr "미러된 플롯"

#: pcbnew/dialogs/dialog_plot_base.cpp:148
msgid "Negative plot"
msgstr "음수 플롯"

#: pcbnew/dialogs/dialog_plot_base.cpp:165
msgid "Global solder mask minimum width and/or margin are not set to 0. "
msgstr "전역 솔더 마스크 최소 폭 또는 간격이 0으로 설정되지 않았습니다. "

#: pcbnew/dialogs/dialog_plot_base.cpp:169
msgid ""
"Most board manufacturers expect 0 and use their own constraints for solder "
"mask minimum width."
msgstr ""
"솔더 마스크의 최소 폭에서 대부분의 기판 제조 업체는 값을 0으로 생각하고 자체 "
"제약 조건을 사용합니다."

#: pcbnew/dialogs/dialog_plot_base.cpp:179
msgid "Board setup"
msgstr "보드 설정"

#: pcbnew/dialogs/dialog_plot_base.cpp:180
msgid "File > Board Setup..."
msgstr "파일 > 기판 설정..."

#: pcbnew/dialogs/dialog_plot_base.cpp:193
msgid "Gerber Options"
msgstr "거버 옵션"

#: pcbnew/dialogs/dialog_plot_base.cpp:200
msgid "Use Protel filename extensions"
msgstr "Protel 파일 이름 확장자 사용"

#: pcbnew/dialogs/dialog_plot_base.cpp:201
msgid ""
"Use Protel Gerber extensions (.GBL, .GTL, etc...)\n"
"No longer recommended. The official extension is .gbr"
msgstr ""
"Protel 거버 확장자를 사용합니다 (.GBL, .GTL, 그외...)\n"
"더이상 권장되지 않습니다. 공식 확장자는 .gbr 입니다"

#: pcbnew/dialogs/dialog_plot_base.cpp:206
msgid "Generate Gerber job file"
msgstr "거버 작업 파일 생성"

#: pcbnew/dialogs/dialog_plot_base.cpp:208
msgid ""
"Generate a Gerber job file that contains info about the board,\n"
"and the list of generated Gerber plot files"
msgstr ""
"현재 기판의 정보와 생성된 거버 플롯 파일 목록을 포함한\n"
"거버 작업 파일을 생성합니다"

#: pcbnew/dialogs/dialog_plot_base.cpp:213
msgid "Remove silkscreen from areas without soldermask"
msgstr "솔더 마스크가 없는 영역에서 실크스크린 제거"

#: pcbnew/dialogs/dialog_plot_base.cpp:217
msgid "Coordinate format:"
msgstr "좌표계 형식:"

#: pcbnew/dialogs/dialog_plot_base.cpp:221
msgid "4.5, unit mm"
msgstr "4.5, 단위 mm"

#: pcbnew/dialogs/dialog_plot_base.cpp:221
msgid "4.6, unit mm"
msgstr "4.6, 단위 mm"

#: pcbnew/dialogs/dialog_plot_base.cpp:227
msgid "Use extended X2 format (recommended)"
msgstr "확장된 X2 형식 사용 (권장)"

#: pcbnew/dialogs/dialog_plot_base.cpp:228
msgid ""
"Use X2 Gerber file format.\n"
"Include  mainly X2 attributes in Gerber headers.\n"
"If not checked, use X1 format.\n"
"In X1 format, these attributes are included as comments in files."
msgstr ""
"X2 거버 파일 형식을 사용합니다.\n"
"거버 헤더에 주로 X2 속성을 포함하게 됩니다.\n"
"체크하지 않으면, X1 형식을 사용하빈다.\n"
"X1 형식에선, 이러한 속성은 파일에 주석으로 포함됩니다."

#: pcbnew/dialogs/dialog_plot_base.cpp:232
msgid "Include netlist attributes"
msgstr "네트리스트 속성 포함"

#: pcbnew/dialogs/dialog_plot_base.cpp:233
msgid ""
"Include netlist metadata and aperture attributes in Gerber files.\n"
"They are comments in the X1 format.\n"
"Used to check connectivity in CAM tools and Gerber viewers."
msgstr ""
"거버 파일에 네트리스트 메타데이터와 조리개 속성을 포함합니다.\n"
"X1 형식의 주석입니다.\n"
"CAM 도구와 거버 뷰어의 연결을 확인하는 데 사용됩니다."

#: pcbnew/dialogs/dialog_plot_base.cpp:237
msgid "Disable aperture macros (not recommended)"
msgstr "조리개 매크로 비활성화 (권장하지 않음)"

#: pcbnew/dialogs/dialog_plot_base.cpp:238
msgid ""
"Disable aperture macros in Gerber files\n"
"Use *only* for broken Gerber viewers."
msgstr ""
"거버 파일에서 조리개 매크로를 비활성화합니다.\n"
"손상된 거버 뷰어에서*만* 사용하세요."

#: pcbnew/dialogs/dialog_plot_base.cpp:252
msgid "Default pen size:"
msgstr "기본 펜 사이즈:"

#: pcbnew/dialogs/dialog_plot_base.cpp:269
msgid "Postscript Options"
msgstr "Postscript 옵션"

#: pcbnew/dialogs/dialog_plot_base.cpp:279
msgid "X scale factor:"
msgstr "X 배율 설정:"

#: pcbnew/dialogs/dialog_plot_base.cpp:284
msgid "Set global X scale adjust for exact scale PostScript output."
msgstr "정확한 축척 PostScript 출력을 위해 전역 X 축척 조정을 설정합니다."

#: pcbnew/dialogs/dialog_plot_base.cpp:291
msgid "Y scale factor:"
msgstr "Y 배율 설정:"

#: pcbnew/dialogs/dialog_plot_base.cpp:296
msgid "Set global Y scale adjust for exact scale PostScript output."
msgstr "정확한 축척 PostScript 출력을 위해 전역 Y 축척 조정을 설정합니다."

#: pcbnew/dialogs/dialog_plot_base.cpp:303
msgid "Track width correction:"
msgstr "배선 너비 수정:"

#: pcbnew/dialogs/dialog_plot_base.cpp:308
msgid ""
"Set global width correction for exact width PostScript output.\n"
"These width correction is intended to compensate tracks width and also pads "
"and vias size errors.\n"
"The reasonable width correction value must be in a range of [-"
"(MinTrackWidth-1), +(MinClearanceValue-1)]."
msgstr ""
"정확한 PostScript 출력을 위해 전역 폭 보정을 설정합니다.\n"
"이 폭 보정은 배선의 폭과 패드, 비아 크기 오류를 보정하기 위해 설정됩니다.\n"
"합리적인 폭 보정 값은 [-(최소배선폭-1), +(최소클리어런스값-1)] 범위 내에 있어"
"야 합니다."

#: pcbnew/dialogs/dialog_plot_base.cpp:319
msgid "Force A4 output"
msgstr "강제로 A4로 출력"

#: pcbnew/dialogs/dialog_plot_base.cpp:325
msgid "DXF Options"
msgstr "DXF 옵션"

#: pcbnew/dialogs/dialog_plot_base.cpp:334
msgid "Uncheck to plot graphic items using their center lines"
msgstr "체크를 풀면 그래픽 개체의 중앙선을 이용하여 플롯합니다"

#: pcbnew/dialogs/dialog_plot_base.cpp:338
msgid "Export units:"
msgstr "내보내기 단위:"

#: pcbnew/dialogs/dialog_plot_base.cpp:346
msgid "The units to use for the exported DXF file"
msgstr "내보낸 DXF 파일에서 사용되는 단위"

#: pcbnew/dialogs/dialog_plot_base.cpp:350
msgid "Use KiCad font to plot text"
msgstr "KiCad 글꼴을 사용하여 텍스트 플롯"

#: pcbnew/dialogs/dialog_plot_base.cpp:351
msgid ""
"Check to use KiCad stroke font\n"
"Uncheck to plot single-line ASCII texts as editable text (using DXF font)"
msgstr ""
"KiCad 스트로크 서체를 사용하려면 체크하세요\n"
"체크를 풀면 한 줄의 ASCII 텍스트를 편집 가능한 텍스트로 플롯합니다 (DXF 서체 "
"사용)"

#: pcbnew/dialogs/dialog_plot_base.cpp:361
msgid "SVG Options"
msgstr "SVG 옵션"

#: pcbnew/dialogs/dialog_plot_base.cpp:373
msgid ""
"This number defines how many digits are exported that are below 1 mm.\n"
"User unit is 10^-<N> mm\n"
"Choose 4 if you are not sure."
msgstr ""
"이 숫자는 1mm 미만으로 내보내는 자릿수를 정의합니다.\n"
"사용자 단위는 10^-<N> mm입니다.\n"
"잘 모르겠다면 4번을 선택하세요."

#: pcbnew/dialogs/dialog_plot_base.cpp:410
msgid "Generate property popups for front footprints"
msgstr "앞면 풋프린트에 대한 속성 팝업 생성"

#: pcbnew/dialogs/dialog_plot_base.cpp:413
#, fuzzy
msgid "Generate property popups for back footprints"
msgstr "기판 제조용 거버 파일 생성"

#: pcbnew/dialogs/dialog_plot_base.cpp:441
msgid "Run DRC..."
msgstr "DRC 실행..."

#: pcbnew/dialogs/dialog_plot_base.cpp:444
#, c-format
msgid "(%d known DRC violations; %d exclusions)"
msgstr "(%d개의 알려진 DRC 위반; %d개 제외)"

#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions.cpp:55
msgid "Trace gap must be greater than 0."
msgstr "추적 간격은 0보다 커야 합니다."

#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions.cpp:65
#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions.cpp:66
#: pcbnew/router/pns_kicad_iface.cpp:699 pcbnew/router/pns_kicad_iface.cpp:781
#: pcbnew/router/pns_kicad_iface.cpp:782
msgid "user choice"
msgstr "사용자 선택"

#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions_base.cpp:36
#, fuzzy
msgid "Track gap:"
msgstr "배선 간 간격 추적:"

#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions_base.cpp:47
msgid "Via gap:"
msgstr "비아 간격:"

#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions_base.cpp:67
msgid "Via gap same as trace gap"
msgstr "비아 간격이 추적 간격보다 큽니다"

#: pcbnew/dialogs/dialog_pns_diff_pair_dimensions_base.h:57
msgid "Differential Pair Dimensions"
msgstr "차동 쌍 치수"

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:23
#: pcbnew/router/router_tool.cpp:2703
msgid "Mode"
msgstr "모드"

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:25
#: pcbnew/router/router_tool.cpp:2697
msgid "Highlight collisions"
msgstr "충돌 부분 강조"

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:31
#, fuzzy
msgid "Free angle mode"
msgstr "자유 각도"

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:34
msgid "Allow DRC violations"
msgstr "DRC 위반 허용"

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:35
msgid ""
"(Highlight collisions mode only) - allows one to establish a track even if "
"is violating the DRC rules."
msgstr ""
"(충돌 강조 모드에서만) - DRC 규칙을 위반했더라도 배선하는 것을 허용합니다."

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:45
#: pcbnew/router/router_tool.cpp:2699
msgid "Shove"
msgstr "밀어내기"

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:51
msgid "Shove vias"
msgstr "비아 밀어내기"

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:52
msgid ""
"When disabled, vias are treated as un-movable objects and hugged instead of "
"shoved."
msgstr ""
"비활성화될 경우, 비아는 움직일 수 없는 객체로 처리되며 밀어내기 대신 주위를 "
"둘러 배선됩니다."

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:56
msgid "Jump over obstacles"
msgstr "장애물 뛰어넘기"

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:57
msgid ""
"When enabled, the router tries to move colliding traces behind solid "
"obstacles (e.g. pads) instead of \"reflecting\" back the collision"
msgstr ""
"활성화하면, 라우터는 충돌을 \"반사\"하는 대신 고정된 장애물(예: 패드) 뒤로 경"
"로를 이동함"

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:67
#: pcbnew/router/router_tool.cpp:2698
msgid "Walk around"
msgstr "돌아가기"

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:82
msgid "Remove redundant tracks"
msgstr "중복 배선 제거"

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:83
msgid ""
"Removes loops while routing (e.g. if the new track ensures same connectivity "
"as an already existing one, the old track is removed).\n"
"Loop removal works locally (only between the start and end of the currently "
"routed trace)."
msgstr ""
"라우팅 중 중복되는 부분을 삭제합니다 (예를 들어, 새 배선이 이미 존재하는 것"
"과 같은 연결임이 확실할 경우, 이미 존재하는 배선이 삭제됩니다).\n"
"중복 삭제는 지역적으로 이루어집니다 (현재 라우팅되는 배선의 시작과 끝 사이에"
"서만 이루어짐)."

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:87
msgid "Optimize pad connections"
msgstr "패드 연결 최적화"

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:88
msgid ""
"When enabled, the router tries to break out pads/vias in a clean way, "
"avoiding acute angles and jagged breakout traces."
msgstr ""
"활성화될 경우, 라우터는 날카로운 각이나 들쭉날쭉한 배선을 피하면서 깔끔한 방"
"식으로 패드와 비아를 분리하도록 시도합니다."

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:92
msgid "Smooth dragged segments"
msgstr "세그먼트를 부드럽게 끌기"

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:93
msgid ""
"When enabled, the router attempts to merge several jagged segments into a "
"single straight one (dragging mode)."
msgstr ""
"활성화될 경우, 들쭉날쭉한 세그먼트를 합쳐 하나의 올곧은 것으로 만드려고 시도"
"합니다 (드래깅 모드)."

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:97
msgid "Suggest track finish"
msgstr "배선 마무리 제안"

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:102
msgid "Optimize entire track being dragged"
msgstr "모든 배선 최적화 끌기"

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:103
msgid ""
"When enabled, the entire portion of the track that is visible on the screen "
"will be optimized and re-routed when a segment is dragged.  When disabled, "
"only the area near the segment being dragged will be optimized."
msgstr ""
"활성화되었을 경우, 세그먼트가 드래그되었을 때 화면에 표시되는 배선의 모든 부"
"분이 최적화되고 재 라우팅됩니다. 비활성화될 경우, 드래그된 세그먼트의 주변 영"
"역만 최적화됩니다."

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:107
msgid "Use mouse path to set track posture"
msgstr "마우스 궤적으로 배선 모양 설정"

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:108
msgid ""
"When enabled, the posture of tracks will be guided by how the mouse is moved "
"from the starting location"
msgstr ""
"활성화되었을 경우, 시작 지점부터 마우스가 어떻게 움직였는지에 따라 배선의 모"
"양이 안내됩니다"

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:112
msgid "Fix all segments on click"
msgstr "클릭시 모든 세그먼트 고정"

#: pcbnew/dialogs/dialog_pns_settings_base.cpp:113
msgid ""
"When enabled, all track segments will be fixed in place up to the cursor "
"location.  When disabled, the last segment (closest to the cursor) will "
"remain free and follow the cursor."
msgstr ""
"활성화되었을 경우, 모든 배선 세그먼트가 커서의 위치까지 고정됩니다.  비활성화"
"될 경우, 마지막 세그먼트 (커서와 가장 가까운 것) 은 고정되지 않으며, 커서를 "
"따라갑니다."

#: pcbnew/dialogs/dialog_pns_settings_base.h:63
msgid "Interactive Router Settings"
msgstr "대화형 라우터 설정"

#: pcbnew/dialogs/dialog_position_relative.cpp:162
msgid "Reset to the current distance from the reference position."
msgstr "참조 위치에서 현재 거리를 초기화합니다."

#: pcbnew/dialogs/dialog_position_relative.cpp:163
msgid "Reset to the current angle from the reference position."
msgstr "참조 위치에서 현재 각도를 초기화합니다."

#: pcbnew/dialogs/dialog_position_relative.cpp:170
msgid "Reset to the current X offset from the reference position."
msgstr "참조 위치에서 현재 X 오프셋을 초기화합니다."

#: pcbnew/dialogs/dialog_position_relative.cpp:171
msgid "Reset to the current Y offset from the reference position."
msgstr "참조 위치에서 현재 Y 오프셋을 초기화합니다."

#: pcbnew/dialogs/dialog_position_relative.cpp:229
msgid "Reference location: grid origin"
msgstr "참조 위치: 그리드 원점"

#: pcbnew/dialogs/dialog_position_relative.cpp:233
msgid "Reference location: local coordinates origin"
msgstr "참조 위치: 지역 좌표 원점"

#: pcbnew/dialogs/dialog_position_relative.cpp:239
msgid "<none selected>"
msgstr "<선택되지 않음>"

#: pcbnew/dialogs/dialog_position_relative.cpp:244
#, c-format
msgid "Reference item: %s"
msgstr "참조 항목 : %s"

#: pcbnew/dialogs/dialog_position_relative_base.cpp:22
msgid "Reference item: <none selected>"
msgstr "참조 항목: <선택하지 않음>"

#: pcbnew/dialogs/dialog_position_relative_base.cpp:34
msgid "Use Local Origin"
msgstr "지역 원점 사용"

#: pcbnew/dialogs/dialog_position_relative_base.cpp:37
msgid "Use Grid Origin"
msgstr "그리드 원점 사용"

#: pcbnew/dialogs/dialog_position_relative_base.cpp:40
msgid "Select Item..."
msgstr "항목 선택..."

#: pcbnew/dialogs/dialog_position_relative_base.cpp:41
msgid ""
"Click and select a board item.\n"
"The anchor position will be the position of the selected item."
msgstr ""
"기판의 개체를 클릭하여 선택하세요.\n"
"고정 위치는 선택한 개체의 위치가 됩니다."

#: pcbnew/dialogs/dialog_position_relative_base.h:72
msgid "Position Relative To Reference Item"
msgstr "참조 항목의 상대 위치"

#: pcbnew/dialogs/dialog_print_pcbnew.cpp:112
msgid "Right-click for layer selection commands."
msgstr "레이어 선택 명령을 마우스 오른쪽 단추로 클릭합니다."

#: pcbnew/dialogs/dialog_print_pcbnew.cpp:215
msgid "Print according to objects tab of appearance manager"
msgstr "형상 관리자의 객체 탭에 따라 출력"

#: pcbnew/dialogs/dialog_print_pcbnew.cpp:243
msgid "No drill mark"
msgstr "드릴 마스크 없음"

#: pcbnew/dialogs/dialog_print_pcbnew.cpp:244
msgid "Small mark"
msgstr "작은 마크"

#: pcbnew/dialogs/dialog_print_pcbnew.cpp:245
msgid "Real drill"
msgstr "실제 드릴"

#: pcbnew/dialogs/dialog_print_pcbnew.cpp:294
msgid "Select all Copper Layers"
msgstr "모든 구리 레이어 선택"

#: pcbnew/dialogs/dialog_print_pcbnew.cpp:297
msgid "Deselect all Copper Layers"
msgstr "모든 구리 레이어 선택 취소"

#: pcbnew/dialogs/dialog_print_pcbnew.cpp:300
msgid "Select all Layers"
msgstr "모든 레이어 선택"

#: pcbnew/dialogs/dialog_print_pcbnew.cpp:303
msgid "Deselect all Layers"
msgstr "모든 레이어 선택 해제"

#: pcbnew/dialogs/dialog_produce_pcb_base.cpp:21
msgid "Select Manufacturer"
msgstr "제조업체 선택"

#: pcbnew/dialogs/dialog_produce_pcb_base.cpp:25
#, c-format
msgid "from %s"
msgstr "%s 에서"

#: pcbnew/dialogs/dialog_produce_pcb_base.cpp:29
#, c-format
msgid "Details: %s"
msgstr "세부 정보: %s"

#: pcbnew/dialogs/dialog_produce_pcb_base.cpp:33
msgid "Send project directly"
msgstr "프로젝트 직접 보내기"

#: pcbnew/dialogs/dialog_produce_pcb_base.cpp:37
msgid "Sends production files to manufacturer from KiCad"
msgstr "KiCad에서 제조업체에 프로덕션 파일 전송"

#: pcbnew/dialogs/dialog_produce_pcb_base.cpp:41
msgid "Produce PCB"
msgstr "PCB 생산"

#: pcbnew/dialogs/dialog_produce_pcb_base.h:44
msgid "Send PCB for production"
msgstr "생산을 위해 PCB 보내기"

#: pcbnew/dialogs/dialog_push_pad_properties.cpp:49
msgid "Change Pads on Current Footprint"
msgstr "현재 풋프린트의 패드 변경"

#: pcbnew/dialogs/dialog_push_pad_properties.cpp:50
msgid "Change Pads on Identical Footprints"
msgstr "동일한 풋프린트의 패드 교체"

#: pcbnew/dialogs/dialog_push_pad_properties_base.cpp:25
msgid "Do not modify pads having a different shape"
msgstr "서로 다른 형상의 패드 수정하지 않기"

#: pcbnew/dialogs/dialog_push_pad_properties_base.cpp:28
msgid "Do not modify pads having different layers"
msgstr "서로 다른 레이어의 패드 수정하지 않기"

#: pcbnew/dialogs/dialog_push_pad_properties_base.cpp:31
msgid "Do not modify pads having a different orientation"
msgstr "서로 다른 방향의 패드 수정하지 않기"

#: pcbnew/dialogs/dialog_push_pad_properties_base.cpp:34
msgid "Do not modify pads having a different type"
msgstr "서로 다른 유형의 패드 수정하지 않기"

#: pcbnew/dialogs/dialog_push_pad_properties_base.h:51
msgid "Push Pad Properties"
msgstr "패드 속성을 푸시"

#: pcbnew/dialogs/dialog_reference_image_properties.cpp:86
msgid ""
"Locked items cannot be freely moved and oriented on the canvas and can only "
"be selected when the 'Locked items' checkbox is checked in the selection "
"filter."
msgstr ""
"잠긴 항목은 캔버스에서 자유롭게 이동하거나 방향을 바꿀 수 없으며, 선택 필터에"
"서 '잠긴 항목' 확인란이 선택되어 있는 경우에만 선택할 수 있습니다."

#: pcbnew/dialogs/dialog_reference_image_properties_base.cpp:54
#, fuzzy
msgid "Associated layer:"
msgstr "연관 레이어"

#: pcbnew/dialogs/dialog_reference_image_properties_base.h:63
#, fuzzy
msgid "Reference Image Properties"
msgstr "이미지 속성"

#: pcbnew/dialogs/dialog_rule_area_properties.cpp:118
msgid "Convert to Rule Area"
msgstr "규칙 영역으로 변환"

#: pcbnew/dialogs/dialog_rule_area_properties.cpp:222
msgid "No layers selected."
msgstr "레이어가 선택되지 않았습니다."

#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:25
msgid "Layers:"
msgstr "레이어:"

#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:44
msgid "Area name:"
msgstr "영역 이름:"

#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:46
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:54
#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:131
msgid "A unique name for this rule area for use in DRC rules"
msgstr "이 규칙 영역에 대해서 DRC 규칙에서 사용될 고유 이름"

#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:69
msgid "Basic rules:"
msgstr "기본 규칙:"

#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:73
msgid "Keep out tracks"
msgstr "배선 금지"

#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:74
msgid "Prevent tracks from routing into this area"
msgstr "배선이 이 영역으로 라우팅되지 않도록 방지"

#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:78
msgid "Keep out vias"
msgstr "비아 금지"

#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:79
msgid "Prevent vias from being placed in this area"
msgstr "비아가 이 영역에 배치되지 않도록 방지"

#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:83
msgid "Keep out pads"
msgstr "패드 금지"

#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:84
msgid "Raise a DRC error if a pad overlaps this area"
msgstr "패드가 이 영역을 덮을 경우 DRC 오류 발생시키기"

#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:88
#, fuzzy
msgid "Keep out zone fills"
msgstr "구리 채움 금지"

#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:89
msgid "Zones will not fill copper into this area"
msgstr "이 영역에 구리 채우지 않기"

#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:93
msgid "Keep out footprints"
msgstr "풋프린트 금지"

#: pcbnew/dialogs/dialog_rule_area_properties_base.cpp:94
msgid "Raise a DRC error if a footprint courtyard overlaps this area"
msgstr "풋프린트 부품자리가 해당 영역과 겹칠 때 DRC 오류를 발생시킵니다"

#: pcbnew/dialogs/dialog_rule_area_properties_base.h:68
msgid "Rule Area Properties"
msgstr "규칙 영역 속성"

#: pcbnew/dialogs/dialog_shape_properties.cpp:196
msgid "Center Point"
msgstr "중심점"

#: pcbnew/dialogs/dialog_shape_properties.cpp:515
msgid "Modify drawing properties"
msgstr "그리기 속성 편집"

#: pcbnew/dialogs/dialog_shape_properties.cpp:538
msgid "Arc angle cannot be zero."
msgstr "호의 각도는 0이 될 수 없습니다."

#: pcbnew/dialogs/dialog_shape_properties.cpp:542
#: pcbnew/dialogs/dialog_shape_properties.cpp:558
#, c-format
msgid "Invalid Arc with radius %f and angle %f."
msgstr "반지름이 %f이고 각도가 %f인 잘못된 호."

#: pcbnew/dialogs/dialog_shape_properties.cpp:564
#: pcbnew/dialogs/dialog_shape_properties.cpp:596
msgid "Line width must be greater than zero."
msgstr "라인 폭은 0보다 커야 합니다."

#: pcbnew/dialogs/dialog_shape_properties.cpp:571
msgid "Radius must be greater than zero."
msgstr "반지름은 0보다 커야 합니다."

#: pcbnew/dialogs/dialog_shape_properties.cpp:574
msgid "Line width must be greater than zero for an unfilled circle."
msgstr "채워지지 않은 원의 경우 선 너비가 0보다 커야 합니다."

#: pcbnew/dialogs/dialog_shape_properties.cpp:581
msgid "Rectangle cannot be empty."
msgstr "사각형을 비워 둘 수 없습니다."

#: pcbnew/dialogs/dialog_shape_properties.cpp:584
msgid "Line width must be greater than zero for an unfilled rectangle."
msgstr "채워지지 않은 사각형의 경우 선 너비가 0보다 커야 합니다."

#: pcbnew/dialogs/dialog_shape_properties.cpp:590
msgid "Line width must be greater than zero for an unfilled polygon."
msgstr "채워지지 않은 다각형의 경우 선 너비가 0보다 커야 합니다."

#: pcbnew/dialogs/dialog_shape_properties.cpp:602
msgid "Line width must be greater than zero for an unfilled curve."
msgstr "채워지지 않은 곡선의 경우 선 너비는 0보다 커야 합니다."

#: pcbnew/dialogs/dialog_shape_properties.cpp:613
msgid "Error List"
msgstr "오류 목록"

#: pcbnew/dialogs/dialog_shape_properties_base.cpp:28
msgid "Start Point"
msgstr "시작점"

#: pcbnew/dialogs/dialog_shape_properties_base.cpp:54
msgid "End Point"
msgstr "끝점"

#: pcbnew/dialogs/dialog_shape_properties_base.cpp:88
#: pcbnew/dialogs/dialog_shape_properties_base.cpp:114
#, fuzzy
msgid "Bezier Control Point"
msgstr "베지어 곡선 제어점"

#: pcbnew/dialogs/dialog_shape_properties_base.cpp:206
msgid "Arc angle:"
msgstr "호각:"

#: pcbnew/dialogs/dialog_swap_layers.cpp:49
msgid "Move items on:"
msgstr "위에 있는 항목을 이동:"

#: pcbnew/dialogs/dialog_swap_layers.cpp:50
msgid "To layer:"
msgstr "이 레이어로:"

#: pcbnew/dialogs/dialog_swap_layers_base.h:48
msgid "Swap Layers"
msgstr "레이어 뒤바꾸기"

#: pcbnew/dialogs/dialog_target_properties.cpp:109
msgid "Modified alignment target"
msgstr "정렬 타겟의 마크 수정"

#: pcbnew/dialogs/dialog_target_properties_base.cpp:50
msgid "Shape:"
msgstr "형상:"

#: pcbnew/dialogs/dialog_target_properties_base.cpp:54
msgid "+"
msgstr "+"

#: pcbnew/dialogs/dialog_target_properties_base.cpp:54
msgid "X"
msgstr "X"

#: pcbnew/dialogs/dialog_target_properties_base.h:51
msgid "Target Properties"
msgstr "타겟 속성"

#: pcbnew/dialogs/dialog_text_properties.cpp:106
msgid "Footprint Reference Properties"
msgstr "풋프린트 참조 속성"

#: pcbnew/dialogs/dialog_text_properties.cpp:107
msgid "Reference:"
msgstr "참조:"

#: pcbnew/dialogs/dialog_text_properties.cpp:111
msgid "Footprint Value Properties"
msgstr "풋프린트 값 속성"

#: pcbnew/dialogs/dialog_text_properties.cpp:120
#, fuzzy
msgid "Footprint Field Properties"
msgstr "풋프린트 속성"

#: pcbnew/dialogs/dialog_text_properties.cpp:126
msgid "Footprint Text Properties"
msgstr "풋프린트 텍스트 속성"

#: pcbnew/dialogs/dialog_text_properties.cpp:308
#, c-format
msgid "Footprint %s (%s), %s, rotated %.1f deg"
msgstr "풋프린트 %s (%s), %s, 회전 %.1f deg"

#: pcbnew/dialogs/dialog_text_properties.cpp:531
msgid "Change text properties"
msgstr "텍스트 속성 편집"

#: pcbnew/dialogs/dialog_text_properties_base.cpp:99
#: pcbnew/fp_text_grid_table.cpp:149 pcbnew/pcb_dimension.cpp:1530
#: pcbnew/pcb_dimension.cpp:1566 pcbnew/pcb_dimension.cpp:1607
#: pcbnew/pcb_dimension.cpp:1652 pcbnew/pcb_dimension.cpp:1689
#: pcbnew/pcb_text.cpp:565
msgid "Knockout"
msgstr "밑색빼기"

#: pcbnew/dialogs/dialog_text_properties_base.cpp:103
msgid "Keep text upright"
msgstr "텍스트 직립을 유지"

#: pcbnew/dialogs/dialog_text_properties_base.cpp:258
msgid "Parent footprint description"
msgstr "상위 풋프린트 설명"

#: pcbnew/dialogs/dialog_textbox_properties.cpp:380
msgid "Change text box properties"
msgstr "텍스트 상자 속성 변경"

#: pcbnew/dialogs/dialog_textbox_properties_base.cpp:205
msgid "Border style:"
msgstr "테두리 스타일:"

#: pcbnew/dialogs/dialog_track_via_properties.cpp:548
#, c-format
msgid "Changing the net will also update %s pad %s to %s."
msgstr "네트를 변경하면 %s 패드 %s 또한 %s(으)로 업데이트됩니다."

#: pcbnew/dialogs/dialog_track_via_properties.cpp:557
#, c-format
msgid "Changing the net will also update %s pad %s and %s pad %s to %s."
msgstr "네트를 변경하면 %s 패드 %s 와 %s 패드 %s 또한 %s(으)로 업데이트됩니다."

#: pcbnew/dialogs/dialog_track_via_properties.cpp:566
#, c-format
msgid "Changing the net will also update %lu connected pads to %s."
msgstr "네트를 변경하면 %lu개의 연결된 패드 또한 %s(으)로 업데이트됩니다."

#: pcbnew/dialogs/dialog_track_via_properties.cpp:572
msgid "Change Nets"
msgstr "네트 변경"

#: pcbnew/dialogs/dialog_track_via_properties.cpp:572
msgid "Leave Nets Unchanged"
msgstr "네트 변경되지 않은 채로 놔두기"

#: pcbnew/dialogs/dialog_track_via_properties.cpp:595
#: pcbnew/dialogs/dialog_track_via_size.cpp:59
msgid "Via hole size must be smaller than via diameter"
msgstr "비아 홀 크기는 비아 직경보다 작아야 합니다"

#: pcbnew/dialogs/dialog_track_via_properties.cpp:604
msgid "Via start layer and end layer cannot be the same"
msgstr "비아의 시작 레이어와 끝 레이어는 같을 수 없습니다"

#: pcbnew/dialogs/dialog_track_via_properties.cpp:799
msgid "Edit track/via properties"
msgstr "배선/비아 속성 편집"

#: pcbnew/dialogs/dialog_track_via_properties.cpp:864
msgid "Updating nets"
msgstr "네트 업데이트"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:41
msgid "Automatically update via nets"
msgstr "네트워크를 통해 자동 업데이트"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:42
msgid ""
"Automatically change the net of this via when the pads or zones it touches "
"are changed"
msgstr ""
"붙어 있는 패드 또는 존이 변경되면 이 비아의 네트 또한 자동으로 변경됩니다"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:76
msgid "Start X:"
msgstr "시작 X:"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:94
msgid "End X:"
msgstr "끝 X:"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:120
#, fuzzy
msgid "Use net class / custom rule widths"
msgstr "네트 클래스 너비 사용"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:124
#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:225
msgid "Pre-defined sizes:"
msgstr "사전 정의된 크기:"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:222
#, fuzzy
msgid "Use net class / custom rule sizes"
msgstr "네트 클래스 크기 사용"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:238
#: pcbnew/dialogs/dialog_track_via_size_base.cpp:36
msgid "Via diameter:"
msgstr "비아 직경:"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:249
#: pcbnew/dialogs/dialog_track_via_size_base.cpp:47
msgid "Via hole:"
msgstr "비아 홀:"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:283
msgid "Via type:"
msgstr "비아 형식:"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:287
#: pcbnew/pcb_track.cpp:1469
msgid "Through"
msgstr "스루"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:287
#: pcbnew/pcb_track.cpp:1471
msgid "Micro"
msgstr "마이크로"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:287
#: pcbnew/pcb_track.cpp:1470
msgid "Blind/buried"
msgstr "블라인드/베리드"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:301
msgid "Start layer:"
msgstr "시작 레이어:"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:308
msgid "End layer:"
msgstr "끝 레이어:"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:321
msgid "Annular rings:"
msgstr "환형 폭:"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:325
msgid "Start, end, and connected layers"
msgstr "시작, 끝 그리고 연결된 레이어"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:377
#, fuzzy
msgid "Add teardrops on via's track connections"
msgstr "구멍이 있는 비아 및 패드에 눈물 방울 추가"

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:404
msgid "Tracks which are similar in size to the via do not need teardrops."
msgstr "비아와 크기가 비슷한 트랙은 눈물방울이 필요하지 않습니다."

#: pcbnew/dialogs/dialog_track_via_properties_base.cpp:418
msgid "(as a percentage of pad/via/track size)"
msgstr "(패드/비아/트랙 크기의 백분율)"

#: pcbnew/dialogs/dialog_track_via_properties_base.h:146
msgid "Track & Via Properties"
msgstr "배선과 비아 속성"

#: pcbnew/dialogs/dialog_track_via_size_base.h:53
msgid "Track and Via Dimensions"
msgstr "배선 및 비아 치수"

#: pcbnew/dialogs/dialog_tuning_pattern_properties.cpp:55
msgid "Target skew: "
msgstr "대상 편향: "

#: pcbnew/dialogs/dialog_tuning_pattern_properties.cpp:86
#: pcbnew/generators/pcb_tuning_pattern.cpp:2002
#: pcbnew/generators/pcb_tuning_pattern.cpp:2024 pcbnew/pad.cpp:1076
#: pcbnew/pcb_track.cpp:1110 pcbnew/pcb_track.cpp:1118
#: pcbnew/pcb_track.cpp:1148 pcbnew/pcb_track.cpp:1154
#: pcbnew/router/router_tool.cpp:2711 pcbnew/router/router_tool.cpp:2716
#: pcbnew/router/router_tool.cpp:2721 pcbnew/router/router_tool.cpp:2732
#: pcbnew/router/router_tool.cpp:2740 pcbnew/router/router_tool.cpp:2745
#: pcbnew/tools/pcb_control.cpp:1506 pcbnew/tools/pcb_control.cpp:1516
#: pcbnew/zone.cpp:646
#, c-format
msgid "(from %s)"
msgstr "(%s (으)로부터)"

#: pcbnew/dialogs/dialog_tuning_pattern_properties_base.cpp:31
msgid "Target length:"
msgstr "타겟 길이:"

#: pcbnew/dialogs/dialog_tuning_pattern_properties_base.cpp:42
msgid "Override custom rules"
msgstr "맞춤 규칙 무시"

#: pcbnew/dialogs/dialog_tuning_pattern_properties_base.cpp:45
msgid "(from 'rule name')"
msgstr "('규칙 이름'에서)"

#: pcbnew/dialogs/dialog_tuning_pattern_properties_base.cpp:49
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:38
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:167
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:296
msgid "Minimum amplitude (A):"
msgstr "최소 진폭 (A):"

#: pcbnew/dialogs/dialog_tuning_pattern_properties_base.cpp:60
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:55
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:184
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:313
msgid "Maximum amplitude (A):"
msgstr "최대 진폭 (A):"

#: pcbnew/dialogs/dialog_tuning_pattern_properties_base.cpp:71
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:66
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:195
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:324
msgid "Spacing (s):"
msgstr "간격 (s):"

#: pcbnew/dialogs/dialog_tuning_pattern_properties_base.cpp:76
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:74
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:203
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:332
#, fuzzy
msgid ""
"Minimum spacing between adjacent tuning segments. The resulting spacing may "
"be greater based on design rules."
msgstr ""
"인접한 미앤더 세그먼트간의 최소 간격입니다. 디자인 규칙에 따라 결과물의 간격"
"은 더 커질 수 있습니다."

#: pcbnew/dialogs/dialog_tuning_pattern_properties_base.cpp:84
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:109
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:238
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:367
msgid "Corner style:"
msgstr "모서리 스타일:"

#: pcbnew/dialogs/dialog_tuning_pattern_properties_base.cpp:94
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:119
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:248
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:377
msgid "Radius (r):"
msgstr "반경 (r):"

#: pcbnew/dialogs/dialog_tuning_pattern_properties_base.cpp:105
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:133
#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:262
#: pcbnew/generators/pcb_tuning_pattern.cpp:2427
msgid "Single-sided"
msgstr "단면"

#: pcbnew/dialogs/dialog_tuning_pattern_properties_base.h:74
#, fuzzy
msgid "Tuning Pattern Properties"
msgstr "선 속성"

#: pcbnew/dialogs/dialog_unused_pad_layers.cpp:51
msgid "Remove Unused Layers"
msgstr "사용하지 않은 레이어 삭제"

#: pcbnew/dialogs/dialog_unused_pad_layers.cpp:52
#, fuzzy
msgid "Restore All Layers"
msgstr "모든 레이어 다시 불러오기"

#: pcbnew/dialogs/dialog_unused_pad_layers.cpp:157
msgid "Set Unused Pad Properties"
msgstr "사용하지 않은 패드 속성 설정"

#: pcbnew/dialogs/dialog_unused_pad_layers_base.cpp:33
#, fuzzy
msgid "&Selected only"
msgstr "선택한 대상만 (&S)"

#: pcbnew/dialogs/dialog_unused_pad_layers_base.cpp:36
msgid "Keep &outside layers"
msgstr "외곽 레이어 유지 (&o)"

#: pcbnew/dialogs/dialog_unused_pad_layers_base.h:58
#, fuzzy
msgid "Unused Pads"
msgstr "에지 레이어 포함"

#: pcbnew/dialogs/dialog_update_pcb_base.cpp:32
msgid "Delete footprints with no symbols"
msgstr "심볼이 없는 풋프린트 삭제"

#: pcbnew/dialogs/dialog_update_pcb_base.cpp:33
msgid ""
"Remove from the board unlocked footprints which are not linked to a "
"schematic symbol."
msgstr ""
"회로도 심볼에 연결되지 않고, 잠겨있지 않은 풋프린트를 기판에서 삭제합니다."

#: pcbnew/dialogs/dialog_update_pcb_base.cpp:37
msgid "Replace footprints with those specified in the schematic"
msgstr "회로도에 지정된 풋프린트로 대체"

#: pcbnew/dialogs/dialog_update_pcb_base.cpp:39
msgid ""
"Normally footprints on the board should be changed to match footprint "
"assignment changes made in the schematic. Uncheck this only if you don't "
"want to change existing footprints on the board."
msgstr ""
"일반적으로 기판의 풋프린트는 회로도에서의 풋프린트 할당 변경점과 일치하도록 "
"변경되어야 합니다. 기판의 기존 풋프린트를 변경하고 싶지 않을 때만 체크를 해제"
"하세요."

#: pcbnew/dialogs/dialog_update_pcb_base.h:53
msgid "Update PCB from Schematic"
msgstr "회로도에서 PCB 업데이트"

#: pcbnew/dialogs/panel_edit_options_base.cpp:29
msgid "Constrain actions to H, V, 45 degrees"
msgstr "수평, 수직, 45도로 제한"

#: pcbnew/dialogs/panel_edit_options_base.cpp:35
msgid "Step for &rotate commands:"
msgstr "회전 명령을 위한 스텝 (&r):"

#: pcbnew/dialogs/panel_edit_options_base.cpp:40
msgid "Set increment (in degrees) for context menu and hotkey rotation."
msgstr "컨텍스트 메뉴와 단축키 회전의 증감값을 (단위: 도) 설정합니다."

#: pcbnew/dialogs/panel_edit_options_base.cpp:52
msgid "Arc editing mode:"
msgstr "호 편집 모드:"

#: pcbnew/dialogs/panel_edit_options_base.cpp:59
msgid "Keep center, adjust radius"
msgstr "중심 유지, 반경 조정"

#: pcbnew/dialogs/panel_edit_options_base.cpp:59
msgid "Keep endpoints or direction of starting point"
msgstr "끝점 또는 시작점 방향 유지"

#: pcbnew/dialogs/panel_edit_options_base.cpp:70
msgid "Track mouse-drag mode:"
msgstr "마우스 드래그 모드 배선:"

#: pcbnew/dialogs/panel_edit_options_base.cpp:77
msgid "Drag (45 degree mode)"
msgstr "드래그 (45도 모드)"

#: pcbnew/dialogs/panel_edit_options_base.cpp:77
msgid "Drag (free angle)"
msgstr "드래그 (자유 각도)"

#: pcbnew/dialogs/panel_edit_options_base.cpp:83
#, fuzzy
msgid "Flip board items left/right (default is top/bottom)"
msgstr "보드 항목 좌/우로 뒤집기 (기본값은 상/하)"

#: pcbnew/dialogs/panel_edit_options_base.cpp:86
msgid "Allow free pads"
msgstr "자유 패드 허용"

#: pcbnew/dialogs/panel_edit_options_base.cpp:87
msgid ""
"If checked, pads can be moved with respect to the rest of the footprint."
msgstr "체크할 경우, 패드를 나머지 풋프린트와 관련하여 움직일 수 있습니다."

#: pcbnew/dialogs/panel_edit_options_base.cpp:157
#: pcbnew/dialogs/panel_edit_options_base.cpp:229
msgid "Toggle selection"
msgstr "선택 항목을 전환합니다."

#: pcbnew/dialogs/panel_edit_options_base.cpp:157
#: pcbnew/dialogs/panel_edit_options_base.cpp:229
msgid "Highlight net (for pads or tracks)"
msgstr "네트 강조 (패드 또는 배선용)."

#: pcbnew/dialogs/panel_edit_options_base.cpp:261
#: pcbnew/dialogs/panel_edit_options_base.cpp:284
msgid "Magnetic Points"
msgstr "자기점"

#: pcbnew/dialogs/panel_edit_options_base.cpp:263
msgid "Magnetic pads"
msgstr "자기 패드"

#: pcbnew/dialogs/panel_edit_options_base.cpp:267
msgid "Magnetic graphics"
msgstr "자기 그래픽"

#: pcbnew/dialogs/panel_edit_options_base.cpp:291
msgid "Snap to pads:"
msgstr "패드에 맞춤:"

#: pcbnew/dialogs/panel_edit_options_base.cpp:293
#: pcbnew/dialogs/panel_edit_options_base.cpp:301
msgid "Capture cursor when the mouse enters a pad area"
msgstr "마우스가 패드 영역에 들어갈 때 커서 캡처"

#: pcbnew/dialogs/panel_edit_options_base.cpp:297
#: pcbnew/dialogs/panel_edit_options_base.cpp:311
msgid "When creating tracks"
msgstr "배선 생성 시"

#: pcbnew/dialogs/panel_edit_options_base.cpp:305
msgid "Snap to tracks:"
msgstr "배선에 맞춤:"

#: pcbnew/dialogs/panel_edit_options_base.cpp:307
#: pcbnew/dialogs/panel_edit_options_base.cpp:315
msgid "Capture cursor when the mouse approaches a track"
msgstr "마우스가 배선에 접근할 때 커서 캡처"

#: pcbnew/dialogs/panel_edit_options_base.cpp:319
msgid "Snap to graphics:"
msgstr "그래픽에 맞춤:"

#: pcbnew/dialogs/panel_edit_options_base.cpp:321
#: pcbnew/dialogs/panel_edit_options_base.cpp:329
msgid "Capture cursor when the mouse approaches graphical control points"
msgstr "마우스가 그래픽 제어점에 접근할 때 커서 캡처"

#: pcbnew/dialogs/panel_edit_options_base.cpp:342
msgid "Always show selected ratsnest"
msgstr "선택한 연결선 항상 표시"

#: pcbnew/dialogs/panel_edit_options_base.cpp:345
#: pcbnew/tools/pcb_actions.cpp:1364
msgid "Show ratsnest with curved lines"
msgstr "곡선을 포함한 연결선 표시"

#: pcbnew/dialogs/panel_edit_options_base.cpp:351
#, fuzzy
msgid "Ratsnest line thickness:"
msgstr "선 두께:"

#: pcbnew/dialogs/panel_edit_options_base.cpp:374
msgid "Draw an outline to show the sheet size."
msgstr "시트 크기를 보여주기 위해 외곽선을 그립니다."

#: pcbnew/dialogs/panel_edit_options_base.cpp:378
msgid "Show courtyard collisions when moving/dragging"
msgstr "이동/끌기 시 부품자리 겹침 표시"

#: pcbnew/dialogs/panel_edit_options_base.cpp:382
msgid "Automatically refill zones"
msgstr "영역 자동 채우기"

#: pcbnew/dialogs/panel_edit_options_base.cpp:384
msgid "If checked, zones will be re-filled after each edit operation"
msgstr "선택하면 각 편집 작업 후 영역이 다시 채워짐"

#: pcbnew/dialogs/panel_fp_editor_color_settings.cpp:113
msgid "Internal Layers"
msgstr "내부 레이어"

#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:379
#: pcbnew/dialogs/panel_setup_text_and_graphics.cpp:224
#, c-format
msgid ""
"%s: Incorrect line width.\n"
"It must be between %s and %s"
msgstr ""
"%s: 선 너비가 잘못되었습니다.\n"
"%s에서 %s 사이여야 함"

#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:404
#: pcbnew/dialogs/panel_setup_text_and_graphics.cpp:249
#, c-format
msgid ""
"%s: Text size is incorrect.\n"
"Size must be between %s and %s"
msgstr ""
"%s: 텍스트 크기가 잘못되었습니다.\n"
"크기는 %s에서 %s 사이여야 함"

#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:422
#: pcbnew/dialogs/panel_setup_text_and_graphics.cpp:267
#, c-format
msgid ""
"%s: Text thickness is too large.\n"
"It will be truncated to %s"
msgstr ""
"%s: 텍스트 두께가 너무 큽니다.\n"
"%s로 잘려짐"

#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:428
#: pcbnew/dialogs/panel_setup_text_and_graphics.cpp:273
#, c-format
msgid ""
"%s: Text thickness is too small.\n"
"It will be truncated to %s"
msgstr ""
"%s: 텍스트 두께가 너무 작습니다.\n"
"%s로 잘려짐"

#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:477
#: pcbnew/dialogs/panel_setup_text_and_graphics.cpp:315
#, fuzzy
msgid "Parameter error"
msgstr "매개변수"

#: pcbnew/dialogs/panel_fp_editor_defaults.cpp:518
msgid "Reference and value are mandatory."
msgstr "참조와 값은 필수입니다."

#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:23
msgid "Default field properties for new footprints:"
msgstr "새 풋프린트에 대한 기본 텍스트 항목:"

#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:73
msgid "Default text items for new footprints:"
msgstr "새 풋프린트에 대한 기본 텍스트 항목:"

#: pcbnew/dialogs/panel_fp_editor_defaults_base.cpp:149
msgid "Default properties for new graphic items:"
msgstr "새 그래픽 항목에 대한 기본 속성:"

#: pcbnew/dialogs/panel_fp_lib_table.cpp:466
#, c-format
msgid "folder with %s files"
msgstr "%s 파일이 있는 폴더"

#: pcbnew/dialogs/panel_fp_lib_table.cpp:565
#, c-format
msgid "Illegal character '%c' in nickname '%s'."
msgstr "허용되지 않는 문자 '%c'이(가) 별칭 '%s' 에서 발견되었습니다."

#: pcbnew/dialogs/panel_fp_lib_table.cpp:810
#, fuzzy
msgid ""
"Select one or more rows containing libraries to save as current KiCad format."
msgstr ""
"오래된 형식 (*.lib) 의 라이브러리가 포함된 행을 하나 이상 선택하여 현재 "
"KiCad 형식 (*.kicad_sym) 으로 저장합니다."

#: pcbnew/dialogs/panel_fp_lib_table.cpp:818
#, fuzzy, c-format
msgid "Save '%s' as current KiCad format and replace entry in table?"
msgstr ""
"'%s'을(를) 현재 KiCad 형식 (*.kicad_sym) 으로 저장하고 테이블에서 레거시 항목"
"을 바꾸시겠습니까?"

#: pcbnew/dialogs/panel_fp_lib_table.cpp:824
#, fuzzy, c-format
msgid "Save %d libraries as current KiCad format and replace entries in table?"
msgstr ""
"%d개의 오래된 형식 라이브러리를 현재 KiCad 형식 (*.kicad_sym) 으로 저장하고 "
"테이블에서 오래된 항목을 교체하시겠습니까?"

#: pcbnew/dialogs/panel_fp_lib_table.cpp:854
#, fuzzy, c-format
msgid ""
"Folder '%s' already exists. Do you want overwrite any existing footprints?"
msgstr "'%s' 파일이 이미 있습니다. 이 파일을 덮어쓰시겠습니까?"

#: pcbnew/dialogs/panel_fp_lib_table.cpp:884
#, c-format
msgid "Failed to save footprint library file '%s'."
msgstr "심볼 라이브러리 파일 '%s'을(를) 저장하지 못했습니다."

#: pcbnew/dialogs/panel_fp_lib_table.cpp:959
#, c-format
msgid "Select %s Library"
msgstr "%s 라이브러리 선택"

#: pcbnew/dialogs/panel_fp_lib_table.cpp:1016
msgid "Warning: Duplicate Nicknames"
msgstr "경고: 중복된 닉네임"

#: pcbnew/dialogs/panel_fp_lib_table_base.cpp:97
msgid "LIbrary Format"
msgstr "라이브러리 형식"

#: pcbnew/dialogs/panel_fp_properties_3d_model.cpp:404
msgid "No filename entered"
msgstr "파일 이름을 입력하지 않았습니다"

#: pcbnew/dialogs/panel_fp_properties_3d_model.cpp:409
msgid "Illegal filename"
msgstr "잘못된 파일 이름"

#: pcbnew/dialogs/panel_fp_properties_3d_model.cpp:414
#: pcbnew/microwave/microwave_polygon.cpp:223
msgid "File not found"
msgstr "파일을 찾을 수 없음"

#: pcbnew/dialogs/panel_fp_properties_3d_model.cpp:419
msgid "Unable to open file"
msgstr "파일을 열 수 없습니다"

#: pcbnew/dialogs/panel_fp_properties_3d_model.cpp:424
msgid "Unknown error"
msgstr "알 수 없는 오류"

#: pcbnew/dialogs/panel_fp_properties_3d_model_base.cpp:35
msgid "3D Model(s)"
msgstr "3D 모델"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:49
msgid "Net names:"
msgstr "네트 이름:"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:53
msgid "Do not show"
msgstr "숨기기"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:53
msgid "Show on pads"
msgstr "패드에 표시"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:53
msgid "Show on tracks"
msgstr "배선에 보이기"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:53
msgid "Show on pads & tracks"
msgstr "패드와 배선에 표시"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:59
#: pcbnew/tools/pcb_actions.cpp:1420
msgid "Show pad numbers"
msgstr "패드 번호 표시"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:69
msgid "Clearance Outlines"
msgstr "클리어런스 외곽선"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:85
#, fuzzy
msgid "Do not show clearances"
msgstr "다시 표시 안 함"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:85
msgid "Show when routing"
msgstr "배선 시에 표시"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:85
msgid "Show when routing w/ via clearance at end"
msgstr "배선 시 끝에 비아 클리어런스도 함께표시"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:85
msgid "Show when routing and editing"
msgstr "배선 및 편집 시에 표시하기"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:85
msgid "Show always"
msgstr "항상 표시"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:91
msgid "Show pad clearance"
msgstr "패드 클리어런스 표시"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:110
#, fuzzy
msgid "Show all fields when parent footprint is selected"
msgstr "풋프린트 선택 시 심볼 강조 표시"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:130
#, fuzzy
msgid "Select/highlight objects corresponding to schematic selection"
msgstr "Schematic 편집기에서 해당 항목 선택"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:132
msgid "Highlight footprints corresponding to selected symbols"
msgstr "선택된 심볼에 상응하는 연결부 강조"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:138
msgid "Ensures that cross-probed footprints are visible in the current view"
msgstr "현재 뷰에서 교차 탐색된 풋프린트가 표시되게 함"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:148
msgid "Highlight nets when they are highlighted in the schematic editor"
msgstr "회로도 편집기에서 강조 표시된 네트를 강조"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:152
msgid "Refresh 3D view automatically"
msgstr "3D 뷰를 자동으로 새로고침"

#: pcbnew/dialogs/panel_pcb_display_options_base.cpp:153
msgid ""
"When enabled, edits to the board will cause the 3D view to refresh (may be "
"slow with larger boards)"
msgstr ""
"활성화되었을 경우, 이 기판을 편집하면 3D 뷰가 자동으로 갱신됩니다 (큰 기판일 "
"수록 느려질 수 있습니다)"

#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:36
msgid "Icon"
msgstr "아이콘"

#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:37
#, fuzzy
msgid "Show Button"
msgstr "버튼 표시"

#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:39
msgid "Category"
msgstr "카테고리"

#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:63
msgid "Move Up"
msgstr "위로 이동"

#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:68
msgid "Move Down"
msgstr "아래로 이동"

#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:76
#: pcbnew/tools/pcb_actions.cpp:994
msgid "Open Plugin Directory"
msgstr "플러그인 디렉토리 열기"

#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:81
msgid "Reload Plugins"
msgstr "플러그인 리로드"

#: pcbnew/dialogs/panel_pcbnew_action_plugins_base.cpp:86
msgid "Show Plugin Errors"
msgstr "플러그인 오류 표시"

#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:23
msgid "Page origin"
msgstr "페이지 원점"

#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:25
msgid "Display Origin"
msgstr "원점 표시"

#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:27
msgid "Select which origin is used for X,Y coordinate display."
msgstr "X,Y 좌표 표시에 사용할 원점을 선택합니다."

#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:31
msgid "Increases right"
msgstr "오른쪽 증가"

#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:31
msgid "Increases left"
msgstr "왼쪽 증가"

#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:33
msgid "X Axis"
msgstr "X축"

#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:35
msgid "Select which the direction on the screen in which the X axis increases."
msgstr "화면상에서 X축 값이 증가하는 방향을 선택하세요."

#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:39
msgid "Increases up"
msgstr "위쪽 증가"

#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:39
msgid "Increases down"
msgstr "아래쪽 증가"

#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:41
msgid "Y Axis"
msgstr "Y축"

#: pcbnew/dialogs/panel_pcbnew_display_origin_base.cpp:43
msgid "Select which the direction on the screen in which the Y axis increases."
msgstr "화면상에서 Y축 값이 증가하는 방향을 선택하세요."

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:46
msgid "Minimum clearance:"
msgstr "최소 클리어런스:"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:51
msgid ""
"The minimum clearance between copper items which do not belong to the same "
"net.  If set, this is an absolute minimum which cannot be reduced by "
"netclasses, custom rules, or other settings."
msgstr ""
"같은 네트에 존재하지 않는 두 개의 구리 개체 사이의 최소 클리어런스.   이 값"
"이 설정되면, 해당 값은 절대적 최소값이 되며 네트클래스, 사용자 정의 규칙 또"
"는 기타 설정으로 줄일 수 없게 됩니다."

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:62
msgid "Minimum track width:"
msgstr "최소 배선폭:"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:67
msgid ""
"The minimum track width.  If set, this is an absolute minimum and cannot be "
"reduced by netclasses, custom rules, or other settings."
msgstr ""
"배선의 최소 폭.   이 값이 설정되면, 해당 값은 절대적 최소값이 되며 네트클래"
"스, 사용자 정의 규칙 또는 기타 설정으로 줄일 수 없게 됩니다."

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:79
msgid "Minimum connection width:"
msgstr "최소 연결 너비:"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:84
msgid "The minimum copper width of connected copper items."
msgstr "연결된 구리 항목의 최소 구리 너비입니다."

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:96
msgid "Minimum annular width:"
msgstr "최소 환형 폭:"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:101
msgid ""
"The minimum annular ring width.  If set, this is an absolute minimum and "
"cannot be reduced by netclasses, custom rules, or other settings."
msgstr ""
"환형 고리의 최소 폭.   이 값이 설정되면, 해당 값은 절대적 최소값이 되며 네트"
"클래스, 사용자 정의 규칙 또는 기타 설정으로 줄일 수 없게 됩니다."

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:112
msgid "Minimum via diameter:"
msgstr "최소 비아 직경:"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:117
msgid ""
"The minimum via diameter.  If set, this is an absolute minimum and cannot be "
"reduced by netclasses, custom rules, or other settings."
msgstr ""
"비아 직경의 최소값.   이 값이 설정되면, 해당 값은 절대적 최소값이 되며 네트클"
"래스, 사용자 정의 규칙 또는 기타 설정으로 줄일 수 없게 됩니다."

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:128
msgid "Copper to hole clearance:"
msgstr "구리부터 홀 클리어런스:"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:133
msgid ""
"The minimum clearance between a hole and an unassociated copper item.  If "
"set, this is an absolute minimum and cannot be reduced by custom rules or "
"other settings."
msgstr ""
"홀과 연관성이 없는 구리 객체간의 클리어런스 최소값. 이 값이 설정되면, 해당 값"
"은 절대적 최소값이 되며 사용자 정의 규칙 또는 기타 설정으로 줄일 수 없게 됩니"
"다."

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:144
msgid "Copper to edge clearance:"
msgstr "구리부터 모서리 클리어런스:"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:149
msgid ""
"The minimum clearance between the board edge and any copper item.  If set, "
"this is an absolute minimum and cannot be reduced by custom rules or other "
"settings."
msgstr ""
"기판 모서리와 모든 구리 객체 간의 클리어런스 최소값.  이 값이 설정되면, 해당 "
"값은 절대적 최소값이 되며 사용자 정의 규칙 또는 기타 설정으로 줄일 수 없게 됩"
"니다."

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:169
msgid "Holes"
msgstr "홀"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:185
msgid "Minimum through hole:"
msgstr "최소 스루홀:"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:190
msgid ""
"The minimum through-hole size.  If set, this is an absolute minimum and "
"cannot be reduced by netclasses, custom rules or other settings."
msgstr ""
"스루홀 크기 최소값.  이 값이 설정되면, 해당 값은 절대적 최소값이 되며 네트클"
"래스, 사용자 정의 규칙 또는 기타 설정으로 줄일 수 없게 됩니다."

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:201
msgid "Hole to hole clearance:"
msgstr "홀 간 클리어런스:"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:206
msgid ""
"The minimum clearance between two drilled holes.   If set, this is an "
"absolute minimum and cannot be reduced by custom rules or other settings. "
"(Note: does not apply to milled holes.)"
msgstr ""
"드릴로 뚫은 두 개의 홀 사이의 클리어런스 최소값.  이 값이 설정되면, 해당 값"
"은 절대적 최소값이 되며 사용자 정의 규칙 또는 기타 설정으로 줄일 수 없게 됩니"
"다. (참고: 밀링된 홀에는 적용되지 않습니다.)"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:226
msgid "uVias"
msgstr "마이크로 비아"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:242
msgid "Minimum uVia diameter:"
msgstr "최소 마이크로 비아 직경:"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:247
msgid ""
"The minimum diameter for micro-vias.  If set, this is an absolute minimum "
"and cannot be reduced by netclasses, custom rules, or other settings."
msgstr ""
"마이크로 비아에 대한 최소 직경.  이 값이 설정되면, 해당 값은 절대적 최소값이 "
"되며 네트클래스, 사용자 정의 규칙 또는 기타 설정으로 줄일 수 없게 됩니다."

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:258
msgid "Minimum uVia hole:"
msgstr "최소 마이크로 비아홀:"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:263
msgid ""
"The minimum micro-via hole size.  If set, this is an absolute minimum and "
"cannot be reduced by netclasses, custom rules, or other settings."
msgstr ""
"마이크로 비아 홀의 최소 크기. 이 값이 설정되면, 해당 값은 절대적 최소값이 되"
"며 네트클래스, 사용자 정의 규칙 또는 기타 설정으로 줄일 수 없게 됩니다."

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:283
msgid "Silkscreen"
msgstr "실크스크린"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:299
msgid "Minimum item clearance:"
msgstr "최소 개체 클리어런스:"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:304
msgid ""
"Minimum clearance between two items on the same silkscreen layer.  If set "
"this can improve legibility.  (Note: does not apply to multiple shapes "
"within a single footprint.)"
msgstr ""
"같은 실크스크린 레이어 상의 두 개체에 대한 최소 클리어런스.  이 값이 설정될 "
"경우, 가독성을 높일 수 있습니다. (참고: 단일 풋 프린트 내의 여러 모양에는 적"
"용되지 않습니다.)"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:315
msgid "Minimum text height:"
msgstr "최소 텍스트 높이:"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:329
msgid "Minimum text thickness:"
msgstr "최소 텍스트 두께:"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:355
msgid "Arc/circle approximated by segments"
msgstr "호/원을 세그먼트로 근사하기"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:368
#, fuzzy
msgid "Maximum allowed deviation:"
msgstr "최대 허용 편차:"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:370
msgid ""
"This is the maximum distance between a circle and the polygonal shape that "
"approximate it.\n"
"The error max defines the number of segments of this polygon."
msgstr ""
"원과 근사되는 다각형 도형 사이의 최대 거리입니다.\n"
"오류의 최대값이 해당 다각형의 세그먼트 수를 정의합니다."

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:375
msgid ""
"The maximum allowed deviation between a true arc or circle and segments used "
"to approximate it.  Smaller values produce smoother graphics at the expense "
"of performance."
msgstr ""
"실제 호와 근사된 세그먼트 간의 최대 허용 편차값입니다.  이 값이 작을 수록 성"
"능은 저하되지만 더 부드러운 그래픽이 생성됩니다."

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:386
#, c-format
msgid "Note: zone filling can be slow when < %s."
msgstr "참고: %s < 의 경우에 존 채우기는 느려질 수 있습니다."

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:398
msgid "Zone fill strategy"
msgstr "영역 채우기 방법"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:408
msgid "Allow fillets outside zone outline"
msgstr "바깥 영역 외곽선에 대해 모깍기 허용"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:420
#, fuzzy
msgid "Minimum thermal relief spoke count:"
msgstr "최소 단열판 스포크 수:"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:439
msgid "Length tuning"
msgstr "길이 조정"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:443
msgid "Include stackup height in track length calculations"
msgstr "스택업의 높이를 배선 길이 계산에 포함"

#: pcbnew/dialogs/panel_setup_constraints_base.cpp:444
msgid ""
"When enabled, the distance between copper layers will be included in track "
"length calculations for tracks with vias.  When disabled, via stackup height "
"is ignored."
msgstr ""
"활성화되면, 구리 레이어간의 거리가 비아가 있는 배선의 길이 계산에 포함됩니"
"다.  비활성화되면, 비아 스택업 높이는 무시됩니다."

#: pcbnew/dialogs/panel_setup_formatting_base.cpp:56
#, fuzzy
msgid "When Adding Footprints to Board"
msgstr "풋프린트 편집기에서 열기"

#: pcbnew/dialogs/panel_setup_formatting_base.cpp:58
#, fuzzy
msgid "Apply board defaults to footprint fields"
msgstr "모든 풋프린트 필드 표시"

#: pcbnew/dialogs/panel_setup_formatting_base.cpp:61
msgid "Apply board defaults to footprint text"
msgstr "풋프린트 텍스트에 보드 기본 설정 적용"

#: pcbnew/dialogs/panel_setup_formatting_base.cpp:64
msgid "Apply board defaults to non-copper footprint shapes"
msgstr "비구리 풋프린트 형상에 보드 기본값 적용"

#: pcbnew/dialogs/panel_setup_layers.cpp:435
msgid "Use the Physical Stackup page to change the number of copper layers."
msgstr "구리 레이어의 수를 바꾸기 위해 물리 스택업 페이지를 사용합니다."

#: pcbnew/dialogs/panel_setup_layers.cpp:469
#, c-format
msgid ""
"Footprints have some items on removed layers:\n"
"%s\n"
"These items will be no longer accessible\n"
"Do you wish to continue?"
msgstr ""
"풋프린트에 삭제된 레이어의 항목이 포함되어 있습니다:\n"
"%s\n"
"이 항목들은 더이상 접근이 불가능합니다\n"
"계속하시겠습니까?"

#: pcbnew/dialogs/panel_setup_layers.cpp:480
msgid ""
"Items have been found on removed layers. This operation will delete all "
"items from removed layers and cannot be undone.\n"
"Do you wish to continue?"
msgstr ""
"삭제된 레이어에서 다수의 개체가 발견되었습니다. 이 동작은 삭제된 레이어의 개"
"체들을 모두 삭제하며, 되돌릴 수 없습니다.\n"
"계속하시겠습니까?"

#: pcbnew/dialogs/panel_setup_layers.cpp:676
msgid "Layer must have a name."
msgstr "레이어는 이름이 있어야 합니다."

#: pcbnew/dialogs/panel_setup_layers.cpp:682
#, c-format
msgid "%s are forbidden in layer names."
msgstr "%s은(는) 레이어 이름에 사용할 수 없습니다."

#: pcbnew/dialogs/panel_setup_layers.cpp:689
msgid "Layer name \"signal\" is reserved."
msgstr "레이어 이름 \"signal\"가 이미 사용 중입니다."

#: pcbnew/dialogs/panel_setup_layers.cpp:698
#, c-format
msgid "Layer name '%s' already in use."
msgstr "레이어 이름 '%s'이(가) 이미 사용 중입니다."

#: pcbnew/dialogs/panel_setup_layers.cpp:798
#, c-format
msgid ""
"Imported settings have fewer copper layers than the current board (%i "
"instead of %i).\n"
"\n"
"Continue and delete the extra inner copper layers from the current board?"
msgstr ""
"불러온 설정은 현재 기판보다 구리 레이어의 개수가 적습니다 (불러온 설정 %i개, "
"현재 기판 %i개).\n"
"\n"
"현재 기판에서 여분의 내부 구리 레이어를 삭제하고 계속하시겠습니까?"

#: pcbnew/dialogs/panel_setup_layers.cpp:807
msgid "Inner Layers To Be Deleted"
msgstr "삭제될 내부 레이어"

#: pcbnew/dialogs/panel_setup_layers.cpp:842
msgid "All user-defined layers have already been added."
msgstr "모든 사용자 정의 레이어가 이미 추가되었습니다."

#: pcbnew/dialogs/panel_setup_layers.cpp:846
msgid "Add User-defined Layer"
msgstr "사용자 정의 레이어 추가"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:26
msgid "Add User Defined Layer..."
msgstr "사용자 정의 레이어 추가..."

#: pcbnew/dialogs/panel_setup_layers_base.cpp:55
msgid "CrtYd_Front"
msgstr "CrtYd_Front"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:60
#: pcbnew/dialogs/panel_setup_layers_base.cpp:648
msgid "Off-board, testing"
msgstr "Off-board, 테스트용"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:67
msgid "If you want a fabrication layer for the front side of the board"
msgstr "기판의 전면에 기판 제조 레이어를 사용하고 싶은 경우"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:71
msgid "Fab_Front"
msgstr "Fab_Front"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:74
#: pcbnew/dialogs/panel_setup_layers_base.cpp:638
msgid "Off-board, manufacturing"
msgstr "Off-board, 제조용"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:79
msgid "If you want an adhesive template for the front side of the board"
msgstr "기판의 전면에 접착면 템플릿을 사용하고 싶은 경우"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:83
msgid "Adhes_Front"
msgstr "Adhes_Front"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:86
#: pcbnew/dialogs/panel_setup_layers_base.cpp:98
#: pcbnew/dialogs/panel_setup_layers_base.cpp:110
#: pcbnew/dialogs/panel_setup_layers_base.cpp:122
#: pcbnew/dialogs/panel_setup_layers_base.cpp:590
#: pcbnew/dialogs/panel_setup_layers_base.cpp:602
#: pcbnew/dialogs/panel_setup_layers_base.cpp:614
#: pcbnew/dialogs/panel_setup_layers_base.cpp:626
msgid "On-board, non-copper"
msgstr "On-board, 비 구리 레이어"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:91
msgid "If you want a solder paste layer for front side of the board"
msgstr "기판의 전면에 솔더 페이스트 레이어를 사용하고 싶은 경우"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:95
msgid "SoldP_Front"
msgstr "SoldP_Front"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:103
msgid "If you want a silk screen layer for the front side of the board"
msgstr "기판의 전면에 실크스크린 레이어를 사용하고 싶은 경우"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:107
msgid "SilkS_Front"
msgstr "SilkS_Front"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:115
msgid "If you want a solder mask layer for the front of the board"
msgstr "기판의 전면에 솔더 마스크 레이어를 사용하고 싶은 경우"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:119
msgid "Mask_Front"
msgstr "Mask_Front"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:127
msgid "If you want a front copper layer"
msgstr "전면 구리 레이어를 사용하고 싶은 경우"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:131
msgid "Front_layer"
msgstr "Front_layer"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:132
msgid "Layer name of front (top) copper layer"
msgstr "전면 (상단) 구리 레이어 이름"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:136
#: pcbnew/dialogs/panel_setup_layers_base.cpp:150
#: pcbnew/dialogs/panel_setup_layers_base.cpp:164
#: pcbnew/dialogs/panel_setup_layers_base.cpp:178
#: pcbnew/dialogs/panel_setup_layers_base.cpp:192
#: pcbnew/dialogs/panel_setup_layers_base.cpp:206
#: pcbnew/dialogs/panel_setup_layers_base.cpp:220
#: pcbnew/dialogs/panel_setup_layers_base.cpp:234
#: pcbnew/dialogs/panel_setup_layers_base.cpp:248
#: pcbnew/dialogs/panel_setup_layers_base.cpp:262
#: pcbnew/dialogs/panel_setup_layers_base.cpp:276
#: pcbnew/dialogs/panel_setup_layers_base.cpp:290
#: pcbnew/dialogs/panel_setup_layers_base.cpp:304
#: pcbnew/dialogs/panel_setup_layers_base.cpp:318
#: pcbnew/dialogs/panel_setup_layers_base.cpp:332
#: pcbnew/dialogs/panel_setup_layers_base.cpp:346
#: pcbnew/dialogs/panel_setup_layers_base.cpp:360
#: pcbnew/dialogs/panel_setup_layers_base.cpp:374
#: pcbnew/dialogs/panel_setup_layers_base.cpp:388
#: pcbnew/dialogs/panel_setup_layers_base.cpp:402
#: pcbnew/dialogs/panel_setup_layers_base.cpp:416
#: pcbnew/dialogs/panel_setup_layers_base.cpp:430
#: pcbnew/dialogs/panel_setup_layers_base.cpp:444
#: pcbnew/dialogs/panel_setup_layers_base.cpp:458
#: pcbnew/dialogs/panel_setup_layers_base.cpp:472
#: pcbnew/dialogs/panel_setup_layers_base.cpp:486
#: pcbnew/dialogs/panel_setup_layers_base.cpp:500
#: pcbnew/dialogs/panel_setup_layers_base.cpp:514
#: pcbnew/dialogs/panel_setup_layers_base.cpp:528
#: pcbnew/dialogs/panel_setup_layers_base.cpp:542
#: pcbnew/dialogs/panel_setup_layers_base.cpp:556
#: pcbnew/dialogs/panel_setup_layers_base.cpp:574
msgid "signal"
msgstr "신호"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:136
#: pcbnew/dialogs/panel_setup_layers_base.cpp:150
#: pcbnew/dialogs/panel_setup_layers_base.cpp:164
#: pcbnew/dialogs/panel_setup_layers_base.cpp:178
#: pcbnew/dialogs/panel_setup_layers_base.cpp:192
#: pcbnew/dialogs/panel_setup_layers_base.cpp:206
#: pcbnew/dialogs/panel_setup_layers_base.cpp:220
#: pcbnew/dialogs/panel_setup_layers_base.cpp:234
#: pcbnew/dialogs/panel_setup_layers_base.cpp:248
#: pcbnew/dialogs/panel_setup_layers_base.cpp:262
#: pcbnew/dialogs/panel_setup_layers_base.cpp:276
#: pcbnew/dialogs/panel_setup_layers_base.cpp:290
#: pcbnew/dialogs/panel_setup_layers_base.cpp:304
#: pcbnew/dialogs/panel_setup_layers_base.cpp:318
#: pcbnew/dialogs/panel_setup_layers_base.cpp:332
#: pcbnew/dialogs/panel_setup_layers_base.cpp:346
#: pcbnew/dialogs/panel_setup_layers_base.cpp:360
#: pcbnew/dialogs/panel_setup_layers_base.cpp:374
#: pcbnew/dialogs/panel_setup_layers_base.cpp:388
#: pcbnew/dialogs/panel_setup_layers_base.cpp:402
#: pcbnew/dialogs/panel_setup_layers_base.cpp:416
#: pcbnew/dialogs/panel_setup_layers_base.cpp:430
#: pcbnew/dialogs/panel_setup_layers_base.cpp:444
#: pcbnew/dialogs/panel_setup_layers_base.cpp:458
#: pcbnew/dialogs/panel_setup_layers_base.cpp:472
#: pcbnew/dialogs/panel_setup_layers_base.cpp:486
#: pcbnew/dialogs/panel_setup_layers_base.cpp:500
#: pcbnew/dialogs/panel_setup_layers_base.cpp:514
#: pcbnew/dialogs/panel_setup_layers_base.cpp:528
#: pcbnew/dialogs/panel_setup_layers_base.cpp:542
#: pcbnew/dialogs/panel_setup_layers_base.cpp:556
#: pcbnew/dialogs/panel_setup_layers_base.cpp:574
msgid "power plane"
msgstr "전원면"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:136
#: pcbnew/dialogs/panel_setup_layers_base.cpp:150
#: pcbnew/dialogs/panel_setup_layers_base.cpp:164
#: pcbnew/dialogs/panel_setup_layers_base.cpp:178
#: pcbnew/dialogs/panel_setup_layers_base.cpp:192
#: pcbnew/dialogs/panel_setup_layers_base.cpp:206
#: pcbnew/dialogs/panel_setup_layers_base.cpp:220
#: pcbnew/dialogs/panel_setup_layers_base.cpp:234
#: pcbnew/dialogs/panel_setup_layers_base.cpp:248
#: pcbnew/dialogs/panel_setup_layers_base.cpp:262
#: pcbnew/dialogs/panel_setup_layers_base.cpp:276
#: pcbnew/dialogs/panel_setup_layers_base.cpp:290
#: pcbnew/dialogs/panel_setup_layers_base.cpp:304
#: pcbnew/dialogs/panel_setup_layers_base.cpp:318
#: pcbnew/dialogs/panel_setup_layers_base.cpp:332
#: pcbnew/dialogs/panel_setup_layers_base.cpp:346
#: pcbnew/dialogs/panel_setup_layers_base.cpp:360
#: pcbnew/dialogs/panel_setup_layers_base.cpp:374
#: pcbnew/dialogs/panel_setup_layers_base.cpp:388
#: pcbnew/dialogs/panel_setup_layers_base.cpp:402
#: pcbnew/dialogs/panel_setup_layers_base.cpp:416
#: pcbnew/dialogs/panel_setup_layers_base.cpp:430
#: pcbnew/dialogs/panel_setup_layers_base.cpp:444
#: pcbnew/dialogs/panel_setup_layers_base.cpp:458
#: pcbnew/dialogs/panel_setup_layers_base.cpp:472
#: pcbnew/dialogs/panel_setup_layers_base.cpp:486
#: pcbnew/dialogs/panel_setup_layers_base.cpp:500
#: pcbnew/dialogs/panel_setup_layers_base.cpp:514
#: pcbnew/dialogs/panel_setup_layers_base.cpp:528
#: pcbnew/dialogs/panel_setup_layers_base.cpp:542
#: pcbnew/dialogs/panel_setup_layers_base.cpp:556
#: pcbnew/dialogs/panel_setup_layers_base.cpp:574
msgid "mixed"
msgstr "혼합"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:136
#: pcbnew/dialogs/panel_setup_layers_base.cpp:150
#: pcbnew/dialogs/panel_setup_layers_base.cpp:164
#: pcbnew/dialogs/panel_setup_layers_base.cpp:178
#: pcbnew/dialogs/panel_setup_layers_base.cpp:192
#: pcbnew/dialogs/panel_setup_layers_base.cpp:206
#: pcbnew/dialogs/panel_setup_layers_base.cpp:220
#: pcbnew/dialogs/panel_setup_layers_base.cpp:234
#: pcbnew/dialogs/panel_setup_layers_base.cpp:248
#: pcbnew/dialogs/panel_setup_layers_base.cpp:262
#: pcbnew/dialogs/panel_setup_layers_base.cpp:276
#: pcbnew/dialogs/panel_setup_layers_base.cpp:290
#: pcbnew/dialogs/panel_setup_layers_base.cpp:304
#: pcbnew/dialogs/panel_setup_layers_base.cpp:318
#: pcbnew/dialogs/panel_setup_layers_base.cpp:332
#: pcbnew/dialogs/panel_setup_layers_base.cpp:346
#: pcbnew/dialogs/panel_setup_layers_base.cpp:360
#: pcbnew/dialogs/panel_setup_layers_base.cpp:374
#: pcbnew/dialogs/panel_setup_layers_base.cpp:388
#: pcbnew/dialogs/panel_setup_layers_base.cpp:402
#: pcbnew/dialogs/panel_setup_layers_base.cpp:416
#: pcbnew/dialogs/panel_setup_layers_base.cpp:430
#: pcbnew/dialogs/panel_setup_layers_base.cpp:444
#: pcbnew/dialogs/panel_setup_layers_base.cpp:458
#: pcbnew/dialogs/panel_setup_layers_base.cpp:472
#: pcbnew/dialogs/panel_setup_layers_base.cpp:486
#: pcbnew/dialogs/panel_setup_layers_base.cpp:500
#: pcbnew/dialogs/panel_setup_layers_base.cpp:514
#: pcbnew/dialogs/panel_setup_layers_base.cpp:528
#: pcbnew/dialogs/panel_setup_layers_base.cpp:542
#: pcbnew/dialogs/panel_setup_layers_base.cpp:556
#: pcbnew/dialogs/panel_setup_layers_base.cpp:574
msgid "jumper"
msgstr "점퍼"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:140
#: pcbnew/dialogs/panel_setup_layers_base.cpp:154
#: pcbnew/dialogs/panel_setup_layers_base.cpp:168
#: pcbnew/dialogs/panel_setup_layers_base.cpp:182
#: pcbnew/dialogs/panel_setup_layers_base.cpp:196
#: pcbnew/dialogs/panel_setup_layers_base.cpp:210
#: pcbnew/dialogs/panel_setup_layers_base.cpp:224
#: pcbnew/dialogs/panel_setup_layers_base.cpp:238
#: pcbnew/dialogs/panel_setup_layers_base.cpp:252
#: pcbnew/dialogs/panel_setup_layers_base.cpp:266
#: pcbnew/dialogs/panel_setup_layers_base.cpp:280
#: pcbnew/dialogs/panel_setup_layers_base.cpp:294
#: pcbnew/dialogs/panel_setup_layers_base.cpp:308
#: pcbnew/dialogs/panel_setup_layers_base.cpp:322
#: pcbnew/dialogs/panel_setup_layers_base.cpp:336
#: pcbnew/dialogs/panel_setup_layers_base.cpp:350
#: pcbnew/dialogs/panel_setup_layers_base.cpp:364
#: pcbnew/dialogs/panel_setup_layers_base.cpp:378
#: pcbnew/dialogs/panel_setup_layers_base.cpp:392
#: pcbnew/dialogs/panel_setup_layers_base.cpp:406
#: pcbnew/dialogs/panel_setup_layers_base.cpp:420
#: pcbnew/dialogs/panel_setup_layers_base.cpp:434
#: pcbnew/dialogs/panel_setup_layers_base.cpp:448
#: pcbnew/dialogs/panel_setup_layers_base.cpp:462
#: pcbnew/dialogs/panel_setup_layers_base.cpp:476
#: pcbnew/dialogs/panel_setup_layers_base.cpp:490
#: pcbnew/dialogs/panel_setup_layers_base.cpp:504
#: pcbnew/dialogs/panel_setup_layers_base.cpp:518
#: pcbnew/dialogs/panel_setup_layers_base.cpp:532
#: pcbnew/dialogs/panel_setup_layers_base.cpp:546
#: pcbnew/dialogs/panel_setup_layers_base.cpp:560
#: pcbnew/dialogs/panel_setup_layers_base.cpp:578
msgid ""
"Copper layer type for Freerouter and other external routers.\n"
"Power plane layers are removed from Freerouter's layer menus."
msgstr ""
"Freerouter와 기타 외부 라우터를 위한 구리 레이어.\n"
"전원면 레이어는 Freerouter의 레이어 메뉴에서 삭제됩니다."

#: pcbnew/dialogs/panel_setup_layers_base.cpp:147
msgid "In1"
msgstr "In1"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:161
msgid "In2"
msgstr "In2"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:175
msgid "In3"
msgstr "In3"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:189
msgid "In4"
msgstr "In4"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:203
msgid "In5"
msgstr "In5"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:217
msgid "In6"
msgstr "In6"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:231
msgid "In7"
msgstr "In7"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:245
msgid "In8"
msgstr "In8"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:259
msgid "In9"
msgstr "In9"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:273
msgid "In10"
msgstr "In10"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:287
msgid "In11"
msgstr "In11"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:301
msgid "In12"
msgstr "In12"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:315
msgid "In13"
msgstr "In13"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:329
msgid "In14"
msgstr "In14"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:343
msgid "In15"
msgstr "In15"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:357
msgid "In16"
msgstr "In16"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:371
msgid "In17"
msgstr "In17"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:385
msgid "In18"
msgstr "In18"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:399
msgid "In19"
msgstr "In19"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:413
msgid "In20"
msgstr "In20"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:427
msgid "In21"
msgstr "In21"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:441
msgid "In22"
msgstr "In22"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:455
msgid "In23"
msgstr "In23"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:469
msgid "In24"
msgstr "In24"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:483
msgid "In25"
msgstr "In25"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:497
msgid "In26"
msgstr "In26"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:511
msgid "In27"
msgstr "In27"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:525
msgid "In28"
msgstr "In28"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:539
msgid "In29"
msgstr "In29"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:553
msgid "In30"
msgstr "In30"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:565
msgid "If you want a back copper layer"
msgstr "후면 구리 레이어를 사용하고 싶은 경우"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:570
msgid "Layer name of back (bottom) copper layer"
msgstr "후면 (바닥) 구리 레이어의 이름"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:583
msgid "If you want a solder mask layer for the back side of the board"
msgstr "기판의 후면에 솔더 마스크 레이어를 사용하고 싶은 경우"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:587
msgid "SoldM_Back"
msgstr "SoldM_Back"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:595
msgid "If you want a silk screen layer for the back side of the board"
msgstr "기판의 후면에 실크스크린 레이어를 사용하고 싶은 경우"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:599
msgid "SilkS_Back"
msgstr "SilkS_Back"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:607
msgid "If you want a solder paste layer for the back side of the board"
msgstr "기판의 후면에 솔더 페이스트 레이어를 사용하고 싶은 경우"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:611
msgid "SoldP_Back"
msgstr "SoldP_Back"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:619
msgid "If you want an adhesive layer for the back side of the board"
msgstr "기판의 후면에 접착 레이어를 사용하고 싶은 경우"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:623
msgid "Adhes_Back"
msgstr "Adhes_Back"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:631
msgid "If you want a fabrication layer for the back side of the board"
msgstr "기판의 후면에 기판 제조 레이어를 사용하고 싶은 경우"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:635
msgid "Fab_Back"
msgstr "Fab_Back"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:645
msgid "CrtYd_Back"
msgstr "CrtYd_Back"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:655
msgid "Pcb_Edges"
msgstr "Pcb_Edges"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:658
msgid "Board contour"
msgstr "기판의 윤곽"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:665
msgid "Margin"
msgstr "Margin"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:668
msgid "Edge_Cuts setback"
msgstr "Edge_Cuts 오프셋"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:675
msgid "Eco1"
msgstr "Eco1"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:678
#: pcbnew/dialogs/panel_setup_layers_base.cpp:688
#: pcbnew/dialogs/panel_setup_layers_base.cpp:700
#: pcbnew/dialogs/panel_setup_layers_base.cpp:712
msgid "Auxiliary"
msgstr "보조자"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:685
msgid "Eco2"
msgstr "Eco2"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:693
msgid "If you want a separate layer for comments or notes"
msgstr "주석이나 메모를 위해 별개의 레이어를 사용하고 싶은 경우"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:697
msgid "Comments"
msgstr "주석"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:705
msgid "If you want a layer for documentation drawings"
msgstr "문서 도면에 대한 레이어를 사용하고 싶은 경우"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:709
msgid "Drawings"
msgstr "도면"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:719
msgid "User1"
msgstr "사용자1"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:722
#: pcbnew/dialogs/panel_setup_layers_base.cpp:732
#: pcbnew/dialogs/panel_setup_layers_base.cpp:742
#: pcbnew/dialogs/panel_setup_layers_base.cpp:752
#: pcbnew/dialogs/panel_setup_layers_base.cpp:762
#: pcbnew/dialogs/panel_setup_layers_base.cpp:772
#: pcbnew/dialogs/panel_setup_layers_base.cpp:782
#: pcbnew/dialogs/panel_setup_layers_base.cpp:792
#: pcbnew/dialogs/panel_setup_layers_base.cpp:802
msgid "User defined layer"
msgstr "사용자 정의 레이어"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:729
msgid "User2"
msgstr "사용자2"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:739
msgid "User3"
msgstr "사용자3"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:749
msgid "User4"
msgstr "사용자4"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:759
msgid "User5"
msgstr "사용자5"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:769
msgid "User6"
msgstr "사용자6"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:779
msgid "User7"
msgstr "사용자7"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:789
msgid "User8"
msgstr "사용자8"

#: pcbnew/dialogs/panel_setup_layers_base.cpp:799
msgid "User9"
msgstr "사용자9"

#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:32
msgid ""
"Use your board manufacturer's recommendations for solder mask expansion and "
"minimum web width."
msgstr ""
"솔더 마스크 확장 및 최소 너비에 대한 보드 제조업체의 권장 사항을 사용하십시"
"오."

#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:36
msgid "If none are provided, setting the values to zero is suggested."
msgstr "아무 값도 제공되지 않았다면, 0으로 설정하는 것을 권장합니다."

#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:56
msgid ""
"Global clearance between pads and the solder mask.\n"
"This value can be superseded by local values for a footprint or a pad."
msgstr ""
"패드와 솔더 마스크 간의 전역 클리어런스 값입니다.\n"
"풋프린트 또는 패드의 지역 값으로 대체될 수 있습니다."

#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:61
msgid ""
"Positive clearance means area bigger than the pad (usual for solder mask "
"clearance)."
msgstr ""
"클리어런스가 양수일 땐 영역이 패드 크기보다 큼을 의미합니다 (대부분 솔더 마스"
"크 클리어런스)."

#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:69
msgid "Solder mask minimum web width:"
msgstr "솔더 마스크의 최소 웹 폭:"

#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:71
msgid ""
"Min. dist between 2 pad areas.\n"
"Two pad areas nearer than this value will be merged during plotting.\n"
"This parameter is only used to plot solder mask layers.\n"
"Leave at 0 unless you know what you are doing."
msgstr ""
"두 패드 영역 사이의 최소 거리입니다.\n"
"두 패드 영역 사이 거리가 이보다 더 가깝다면, 플로팅 중에 영역이 합쳐집니다.\n"
"이 매개변수는 솔더 마스크 레이어를 플롯할 때만 사용됩니다.\n"
"무엇을 하려는지 확실히 알고 있는 경우가 아니라면, 0으로 두는 것을 권장합니다."

#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:76
msgid ""
"Minimum distance between openings in the solder mask.  Pad openings closer "
"than this distance will be plotted as a single opening."
msgstr ""
"솔더 마스크의 개구부 사이의 최소 거리입니다.  패드 개구부의 거리가 이보다 가"
"까울 경우 하나로 합쳐져 플롯됩니다."

#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:84
msgid "Solder mask to copper clearance:"
msgstr "구리 간극에 대한 솔더 마스크:"

#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:95
msgid "Allow bridged solder mask apertures between pads within footprints"
msgstr "풋프린트 내의 패드 사이에 브리지된 솔더 마스크 구멍 허용"

#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:105
msgid ""
"Global clearance between pads and the solder paste.\n"
"This value can be superseded by local values for a footprint or a pad.\n"
"Final clearance value is the sum of this value and the clearance value ratio."
msgstr ""
"이 값은 패드와 솔더 페이스트 간의 전역 클리어런스값을 나타냅니다.\n"
"이 값은 각 풋프린트 또는 패드의 지역 값으로 대체될 수 있습니다.\n"
"최종 클리어런스 값은 이 값과 클리어런스 값의 비율의 합으로 결정됩니다."

#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:110
msgid ""
"Negative clearance means area smaller than the pad (usual for solder paste "
"clearance)."
msgstr ""
"클리어런스가 음수일 땐 영역이 패드 크기보다 작음을 의미합니다 (대부분 솔더 페"
"이스트 클리어런스)."

#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:120
msgid ""
"Global clearance ratio in percent between pads and the solder paste.\n"
"A value of 10 means the clearance value is 10 percent of the pad size.\n"
"This value can be superseded by local values for a footprint or a pad.\n"
"Final clearance value is the sum of this value and the clearance value."
msgstr ""
"이 값은 패드와 솔더 페이스트 간의 전역 클리어런스값을 백분율로 나타냅니다.\n"
"값이 10일 경우, 클리어런스 값은 패드 크기의 10 퍼센트라는 의미입니다.\n"
"이 값은 각 풋프린트 또는 패드의 지역 값으로 대체될 수 있습니다.\n"
"최종 클리어런스 값은 이 값과 클리어런스 값의 합으로 결정됩니다."

#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:125
msgid "Additional clearance as a percentage of the pad size."
msgstr "추가 클리어런스는 패드 사이즈에 대해 백분율로 지정됩니다."

#: pcbnew/dialogs/panel_setup_mask_and_paste_base.cpp:136
msgid ""
"Note: Solder paste clearances (absolute and relative) are added to determine "
"the final clearance."
msgstr ""
"참고: 솔더 페이스트 클리어런스 (상대값과 절대값 모두) 는 최종 클리어런스를 결"
"정하는 데에 더해져 사용됩니다."

#: pcbnew/dialogs/panel_setup_rules.cpp:105
msgid "Cancel Changes?"
msgstr "변경을 취소 하겠습니까?"

#: pcbnew/dialogs/panel_setup_rules.cpp:644
msgid "DRC rules"
msgstr "DRC 규칙"

#: pcbnew/dialogs/panel_setup_rules.cpp:651
#: pcbnew/drc/drc_rule_condition.cpp:64
msgid "ERROR:"
msgstr "오류:"

#: pcbnew/dialogs/panel_setup_rules.cpp:714
msgid "Design rules cannot be added without a project"
msgstr "디자인 규칙은 프로젝트 없이 추가가 불가능합니다"

#: pcbnew/dialogs/panel_setup_rules_base.cpp:23
msgid "DRC rules:"
msgstr "DRC 규칙:"

#: pcbnew/dialogs/panel_setup_rules_base.cpp:77
msgid "Check rule syntax"
msgstr "규칙 문법을 체크"

#: pcbnew/dialogs/panel_setup_rules_help_md.h:2
msgid ""
"### Top-level Clauses\n"
"\n"
"    (version <number>)\n"
"\n"
"    (rule <rule_name> <rule_clause> ...)\n"
"\n"
"\n"
"<br>\n"
"\n"
"### Rule Clauses\n"
"\n"
"    (constraint <constraint_type> ...)\n"
"\n"
"    (condition \"<expression>\")\n"
"\n"
"    (layer \"<layer_name>\")\n"
"\n"
"    (severity <severity_name>)\n"
"\n"
"\n"
"<br>\n"
"\n"
"### Constraints\n"
"\n"
"| Constraint type           | Argument "
"type                                                                                                          "
"| "
"Description                                                                                                                                                                                                                                                                                                                                                                                                                                             "
"|\n"
"|---------------------------|------------------------------------------------------------------------------------------------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|\n"
"| `annular_width`           | min/opt/"
"max                                                                                                            "
"| Checks the width of annular rings on vias."
"<br>                                                                                                                                                                                                                                                                                                                                                                                                          "
"|\n"
"| `clearance`               | "
"min                                                                                                                    "
"| Specifies the **electrical** clearance between copper objects of different "
"nets.  (See `physical_clearance` if you wish to specify clearance between "
"objects regardless of net.)<br><br>To allow copper objects to overlap "
"(collide), create a `clearance` constraint with the `min` value less than "
"zero (for example, `-1`)."
"<br>                                                                                                                      "
"|\n"
"| `courtyard_clearance`     | "
"min                                                                                                                    "
"| Checks the clearance between footprint courtyards and generates an error "
"if any two courtyards are closer than the `min` distance.  If a footprint "
"does not have a courtyard shape, no errors will be generated from this "
"constraint."
"<br>                                                                                                                                                                                                               "
"|\n"
"| `diff_pair_gap`           | min/opt/"
"max                                                                                                            "
"| Checks the gap between coupled tracks in a differential pair.  Coupled "
"tracks are segments that are parallel to each other.  Differential pair gap "
"is not tested on uncoupled portions of a differential pair (for example, the "
"fanout from a component)."
"<br>                                                                                                                                                                                           "
"|\n"
"| `diff_pair_uncoupled`     | "
"max                                                                                                                    "
"| Checks the distance that a differential pair track is routed uncoupled "
"from the other polarity track in the pair (for example, where the pair fans "
"out from a component, or becomes uncoupled to pass around another object "
"such as a via)."
"<br>                                                                                                                                                                                                         "
"|\n"
"| `disallow`                | "
"`track`<br>`via`<br>`micro_via`<br>`buried_via`<br>`pad`<br>`zone`<br>`text`<br>`graphic`<br>`hole`<br>`footprint`<br> "
"| Specify one or more object types to disallow, separated by spaces.  For "
"example, `(constraint disallow track)` or `(constraint disallow track via "
"pad)`.  If an object of this type matches the rule condition, a DRC error "
"will be created.<br><br>This constraint is essentially the same as a keepout "
"rule area, but can be used to create more specific keepout restrictions."
"<br>                                                                   |\n"
"| `edge_clearance`          | min/opt/"
"max                                                                                                            "
"| Checks the clearance between objects and the board edge.<br><br>This can "
"also be thought of as the \"milling tolerance\" as the board edge will "
"include all graphical items on the `Edge.Cuts` layer as well as any *oval* "
"pad holes.  (See `physical_hole_clearance` for the drilling "
"tolerance.)<br>                                                                                                                                                    "
"|\n"
"| `length`                  | min/"
"max                                                                                                                "
"| Checks the total routed length for the nets that match the rule condition "
"and generates an error for each net that is below the `min` value (if "
"specified) or above the `max` value (if specified) of the constraint."
"<br>                                                                                                                                                                                                                               "
"|\n"
"| `hole`                    | min/"
"max                                                                                                                "
"| Checks the size (diameter) of a drilled hole in a pad or via.  For oval "
"holes, the smaller (minor) diameter will be tested against the `min` value "
"(if specified) and the larger (major) diameter will be tested against the "
"`max` value (if specified)."
"<br>                                                                                                                                                                                            "
"|\n"
"| `hole_clearance`          | "
"min                                                                                                                    "
"| Checks the clearance between a drilled hole in a pad or via and copper "
"objects on a different net.  The clearance is measured from the diameter of "
"the hole, not its center."
"<br>                                                                                                                                                                                                                                                                        "
"|\n"
"| `hole_to_hole`            | "
"min                                                                                                                    "
"| Checks the clearance between mechanically-drilled holes in pads and vias.  "
"The clearance is measured between the diameters of the holes, not between "
"their centers.<br><br>This constraint is soley for the protection of drill "
"bits.  The clearance between **laser-drilled** (microvias) and other non-"
"mechanically-drilled holes is not checked, nor is the clearance between "
"**milled** (oval-shaped) and other non-mechanically-drilled holes.<br> |\n"
"| `physical_clearance`      | "
"min                                                                                                                    "
"| Checks the clearance between two objects on a given layer (including non-"
"copper layers).<br><br>While this can perform more general-purpose checks "
"than `clearance`, it is much slower.  Use `clearance` where possible."
"<br>                                                                                                                                                                                                                            "
"|\n"
"| `physical_hole_clearance` | "
"min                                                                                                                    "
"| Checks the clearance between a drilled hole in a pad or via and another "
"object, regardless of net. The clearance is measured from the diameter of "
"the hole, not its center.<br><br>This can also be thought of as the "
"\"drilling tolerance\" as it only includes **round** holes (see "
"`edge_clearance` for the milling tolerance)."
"<br>                                                                                                                    "
"|\n"
"| `silk_clearance`          | min/opt/"
"max                                                                                                            "
"| Checks the clearance between objects on silkscreen layers and other "
"objects."
"<br>                                                                                                                                                                                                                                                                                                                                                                        "
"|\n"
"| `skew`                    | "
"max                                                                                                                    "
"| Checks the total skew for the nets that match the rule condition, that is, "
"the difference between the length of each net and the average of all the "
"lengths of each net that is matched by the rule.  If the absolute value of "
"the difference between that average and the length of any one net is above "
"the constraint `max` value, an error will be generated."
"<br>                                                                                   "
"|\n"
"| `thermal_relief_gap`      | "
"min                                                                                                                    "
"| Specifies the width of the gap between a pad and a zone with a thermal-"
"relief connection."
"<br>                                                                                                                                                                                                                                                                                                                                                           "
"|\n"
"| `thermal_spoke_width`     | "
"opt                                                                                                                    "
"| Specifies the width of the spokes connecting a pad to a zone with a "
"thermal-relief connection."
"<br>                                                                                                                                                                                                                                                                                                                                                      "
"|\n"
"| `track_width`             | min/opt/"
"max                                                                                                            "
"| Checks the width of track and arc segments.  An error will be generated "
"for each segment that has a width below the `min` value (if specified) or "
"above the `max` value (if specified)."
"<br>                                                                                                                                                                                                                                                             "
"|\n"
"| `via_count`               | "
"max                                                                                                                    "
"| Counts the number of vias on every net matched by the rule condition.  If "
"that number exceeds the constraint `max` value on any matched net, an error "
"will be generated for that net."
"<br>                                                                                                                                                                                                                                                               "
"|\n"
"| `zone_connection`         | "
"`solid`<br>`thermal_reliefs`<br>`none`                                                                                 "
"| Specifies the connection to be made between a zone and a pad."
"<br>                                                                                                                                                                                                                                                                                                                                                                                       "
"|\n"
"\n"
"\n"
"### Items\n"
"\n"
" * `A` &nbsp;&nbsp; _the first (or only) item under test_\n"
" * `B` &nbsp;&nbsp; _the second item under test (for binary tests)_\n"
" * `L` &nbsp;&nbsp; _the layer currently under test_\n"
"\n"
"<br>\n"
"\n"
"### Severity Names\n"
"\n"
" * warning\n"
" * error\n"
" * exclusion\n"
" * ignore\n"
"\n"
"<br>\n"
"\n"
"### Examples\n"
"\n"
"    (version 1)\n"
"\n"
"    (rule HV\n"
"       (constraint clearance (min 1.5mm))\n"
"       (condition \"A.NetClass == 'HV'\"))\n"
"\n"
"\n"
"    (rule HV\n"
"       (layer outer)\n"
"       (constraint clearance (min 1.5mm))\n"
"       (condition \"A.NetClass == 'HV'\"))\n"
"\n"
"\n"
"    (rule HV_HV\n"
"       # wider clearance between HV tracks\n"
"       (constraint clearance (min \"1.5mm + 2.0mm\"))\n"
"       (condition \"A.NetClass == 'HV' && B.NetClass == 'HV'\"))\n"
"\n"
"\n"
"    (rule HV_unshielded\n"
"       (constraint clearance (min 2mm))\n"
"       (condition \"A.NetClass == 'HV' && !A.enclosedByArea('Shield*')\"))\n"
"\n"
"\n"
"    (rule heavy_thermals\n"
"       (constraint thermal_spoke_width (min 0.5mm))\n"
"       (condition \"A.NetClass == 'HV'\"))\n"
"<br><br>\n"
"\n"
"### Notes\n"
"\n"
"Version clause must be the first clause.  It indicates the syntax version of "
"the file so that \n"
"future rules parsers can perform automatic updates.  It should be\n"
"set to \"1\".\n"
"\n"
"Rules should be ordered by specificity.  Later rules take\n"
"precedence over earlier rules; once a matching rule is found\n"
"no further rules will be checked.\n"
"\n"
"Use Ctrl+/ to comment or uncomment line(s).\n"
"<br><br><br>\n"
"\n"
"### Expression functions\n"
"\n"
"All function parameters support simple wildcards (`*` and `?`).\n"
"<br><br>\n"
"\n"
"    A.intersectsCourtyard('<footprint_refdes>')\n"
"True if any part of `A` lies within the given footprint's principal "
"courtyard.\n"
"<br><br>\n"
"\n"
"    A.intersectsFrontCourtyard('<footprint_refdes>')\n"
"True if any part of `A` lies within the given footprint's front courtyard.\n"
"<br><br>\n"
"\n"
"    A.intersectsBackCourtyard('<footprint_refdes>')\n"
"True if any part of `A` lies within the given footprint's back courtyard.\n"
"<br><br>\n"
"\n"
"    A.intersectsArea('<zone_name>')\n"
"True if any part of `A` lies within the given zone's outline.\n"
"<br><br>\n"
"\n"
"    A.enclosedByArea('<zone_name>')\n"
"True if all of `A` lies within the given zone's outline.\n"
"\n"
"NB: this is potentially a more expensive call than `intersectsArea()`.  Use "
"`intersectsArea()`\n"
"where possible.\n"
"<br><br>\n"
"\n"
"    A.getField('<field_name>')\n"
"The value of the given field. Only footprints have fields, so a field is "
"only returned if\n"
"`A` is a footprint.\n"
"<br><br>\n"
"\n"
"    A.isPlated()\n"
"True if `A` has a hole which is plated.\n"
"<br><br>\n"
"\n"
"    A.inDiffPair('<net_name>')\n"
"True if `A` has a net that is part of the specified differential pair.\n"
"`<net_name>` is the base name of the differential pair.  For example, "
"`inDiffPair('/CLK')`\n"
"matches items in the `/CLK_P` and `/CLK_N` nets.\n"
"<br><br>\n"
"\n"
"    AB.isCoupledDiffPair()\n"
"True if `A` and `B` are members of the same diff pair.\n"
"<br><br>\n"
"\n"
"    A.memberOfGroup('<group_name>')\n"
"True if `A` is a member of the given group. The name can contain wildcards.\n"
"Includes nested membership.\n"
"<br><br>\n"
"\n"
"    A.memberOfFootprint('<footprint_reference>')\n"
"True if `A` is a member of a footprint matching the given reference "
"designator.  The\n"
"reference can contain wildcards.\n"
"<br><br>\n"
"\n"
"    A.memberOfSheet('<sheet_path>')\n"
"True if `A` is a member of the given schematic sheet. The sheet path can "
"contain wildcards.\n"
"<br><br>\n"
"\n"
"    A.existsOnLayer('<layer_name>')\n"
"True if `A` exists on the given layer.  The layer name can be\n"
"either the name assigned in Board Setup > Board Editor Layers or\n"
"the canonical name (ie: `F.Cu`).\n"
"\n"
"NB: this returns true if `A` is on the given layer, independently\n"
"of whether or not the rule is being evaluated for that layer.\n"
"For the latter use a `(layer \"layer_name\")` clause in the rule.\n"
"<br><br>\n"
"\n"
"### More Examples\n"
"\n"
"    (rule \"copper keepout\"\n"
"       (constraint disallow track via zone)\n"
"       (condition \"A.intersectsArea('zone3')\"))\n"
"\n"
"\n"
"    (rule \"BGA neckdown\"\n"
"       (constraint track_width (min 0.2mm) (opt 0.25mm))\n"
"       (constraint clearance (min 0.05mm) (opt 0.08mm))\n"
"       (condition \"A.intersectsCourtyard('U3')\"))\n"
"\n"
"\n"
"    # prevent silk over tented vias\n"
"    (rule silk_over_via\n"
"       (constraint silk_clearance (min 0.2mm))\n"
"       (condition \"A.Type == '*Text' && B.Type == 'Via'\"))\n"
"\n"
"\n"
"    (rule \"Distance between Vias of Different Nets\"\n"
"        (constraint hole_to_hole (min 0.254mm))\n"
"        (condition \"A.Type == 'Via' && B.Type == 'Via' && A.Net != B."
"Net\"))\n"
"\n"
"    (rule \"Clearance between Pads of Different Nets\"\n"
"        (constraint clearance (min 3.0mm))\n"
"        (condition \"A.Type == 'Pad' && B.Type == 'Pad' && A.Net != B."
"Net\"))\n"
"\n"
"\n"
"    (rule \"Via Hole to Track Clearance\"\n"
"        (constraint hole_clearance (min 0.254mm))\n"
"        (condition \"A.Type == 'Via' && B.Type == 'Track'\"))\n"
"\n"
"    (rule \"Pad to Track Clearance\"\n"
"        (constraint clearance (min 0.2mm))\n"
"        (condition \"A.Type == 'Pad' && B.Type == 'Track'\"))\n"
"\n"
"\n"
"    (rule \"clearance-to-1mm-cutout\"\n"
"        (constraint edge_clearance (min 0.8mm))\n"
"        (condition \"A.Layer == 'Edge.Cuts' && A.Line_Width == 1.0mm\"))\n"
"\n"
"\n"
"    (rule \"Max Drill Hole Size Mechanical\"\n"
"        (constraint hole_size (max 6.3mm))\n"
"        (condition \"A.Pad_Type == 'NPTH, mechanical'\"))\n"
"\n"
"    (rule \"Max Drill Hole Size PTH\"\n"
"        (constraint hole_size (max 6.35mm))\n"
"        (condition \"A.Pad_Type == 'Through-hole'\"))\n"
"\n"
"\n"
"    # Specify an optimal gap for a particular diff-pair\n"
"    (rule \"dp clock gap\"\n"
"        (constraint diff_pair_gap (opt \"0.8mm\"))\n"
"        (condition \"A.inDiffPair('/CLK')\"))\n"
"\n"
"    # Specify a larger clearance around any diff-pair\n"
"    (rule \"dp clearance\"\n"
"        (constraint clearance (min \"1.5mm\"))\n"
"        (condition \"A.inDiffPair('*') && !AB.isCoupledDiffPair()\"))\n"
"\n"
"\n"
"    # Don't use thermal reliefs on heatsink pads\n"
"    (rule heat_sink_pad\n"
"        (constraint zone_connection solid)\n"
"        (condition \"A.Fabrication_Property == 'Heatsink pad'\"))\n"
"\n"
"    # Require all four thermal relief spokes to connect to parent zone\n"
"    (rule fully_spoked_pads\n"
"        (constraint min_resolved_spokes 4))\n"
"\n"
"    # Set thermal relief gap & spoke width for all zones\n"
"    (rule defined_relief\n"
"        (constraint thermal_relief_gap (min 10mil))\n"
"        (constraint thermal_spoke_width (min 12mil)))\n"
"\n"
"    # Override thermal relief gap & spoke width for GND and PWR zones\n"
"    (rule defined_relief_pwr\n"
"        (constraint thermal_relief_gap (min 10mil))\n"
"        (constraint thermal_spoke_width (min 12mil))\n"
"        (condition \"A.Name == 'zone_GND' || A.Name == 'zone_PWR'\"))\n"
"\n"
"\n"
"    # Prevent solder wicking from SMD pads\n"
"    (rule holes_in_pads\n"
"        (constraint physical_hole_clearance (min 0.2mm))\n"
"        (condition \"B.Pad_Type == 'SMD'\"))\n"
"\n"
"    # Disallow solder mask margin overrides\n"
"    (rule \"disallow solder mask margin overrides\"\n"
"        (constraint assertion \"A.Soldermask_Margin_Override == 0mm\")\n"
"        (condition \"A.Type == 'Pad'\"))\n"
"\n"
"\n"
"    # Enforce a mechanical clearance between components and board edge\n"
"    (rule front_mechanical_board_edge_clearance\n"
"        (layer \"F.Courtyard\")\n"
"        (constraint physical_clearance (min 3mm))\n"
"        (condition \"B.Layer == 'Edge.Cuts'\"))\n"
"\n"
"\n"
"    # Check current-carrying capacity\n"
"    (rule high-current\n"
"        (constraint track_width (min 1.0mm))\n"
"        (constraint connection_width (min 0.8mm))\n"
"        (condition \"A.NetClass == 'Power'\"))\n"
"\n"
"\n"
"    # Separate drill bit and milling cutter size constraints\n"
"    (rule \"Plated through-hole size\"\n"
"        (constraint hole_size (min 0.2mm) (max 6.35mm))\n"
"        (condition \"A.isPlated() && A.Hole_Size_X == A.Hole_Size_Y\"))\n"
"\n"
"    (rule \"Plated slot size\"\n"
"        (constraint hole_size (min 0.5mm))\n"
"        (condition \"A.isPlated() && A.Hole_Size_X != A.Hole_Size_Y\"))\n"
"\n"
"\n"
"### Documentation\n"
"\n"
"For the full documentation see [https://docs.kicad.org](https://docs.kicad."
"org/GetMajorMinorVersion/en/pcbnew/pcbnew.html#custom_design_rules)."
msgstr ""

#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:19
#, fuzzy
msgid "Default properties for round shapes:"
msgstr "새 그래픽 항목에 대한 기본 속성:"

#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:38
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:220
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:402
msgid "Edges:"
msgstr "가장자리:"

#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:42
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:224
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:406
msgid "Straight lines"
msgstr "직선"

#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:45
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:227
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:409
msgid "Curved"
msgstr "곡선"

#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:143
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:325
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:507
msgid "Curve points:"
msgstr "곡선 점:"

#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:188
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:370
#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:547
#, fuzzy
msgid "Allow teardrop to span two track segments"
msgstr "티어 드롭이 두 트랙 세그먼트에 걸쳐 있도록 허용"

#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:201
#, fuzzy
msgid "Default properties for rectangular shapes:"
msgstr "새 그래픽 항목에 대한 기본 속성:"

#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:383
msgid "Properties for track-to-track teardrops:"
msgstr "트랙 간 티어드롭의 속성:"

#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:514
msgid "Maximum track width"
msgstr "최대 배선폭"

#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:516
#, fuzzy
msgid ""
"Max track width ratio to create a teardrop.\n"
"100 always creates a teardrop."
msgstr ""
"최대 패드/비아 크기 대 트랙 너비 비율로 눈물 방울을 생성합니다.\n"
"100은 항상 눈물방울을 만듭니다."

#: pcbnew/dialogs/panel_setup_teardrops_base.cpp:522
msgid "Tracks which are similar in size do not need teardrops."
msgstr "크기가 비슷한 트랙은 티어드롭이 필요하지 않습니다."

#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:21
#, fuzzy
msgid "Default properties for new graphics and text:"
msgstr "새 그래픽 항목에 대한 기본 속성:"

#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:78
msgid "Default properties for new dimension objects:"
msgstr "새 치수 객체에 대한 기본 속성:"

#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:98
msgid ""
"Default units for dimensions (\"automatic\" to follow the chosen UI units)"
msgstr "치수에 대한 기본 유닛 (\"자동\" 을 선택하면 UI가 고른 단위에 따릅니다)"

#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:105
msgid "Text position:"
msgstr "텍스트 위치:"

#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:113
msgid "Where to position the dimension text relative to the dimension line"
msgstr "치수선에 대해서 치수 텍스트를 어디에 배치할 것인지 결정"

#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:127
msgid "Keep text aligned"
msgstr "치수선에 텍스트 정렬"

#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:128
msgid "When checked, dimension text will be kept aligned with dimension lines"
msgstr "체크할 경우, 치수 텍스트는 치수 선에 맞추어 정렬됩니다"

#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:140
msgid "How many digits of precision to show"
msgstr "표시할 정밀도 자리수 개수"

#: pcbnew/dialogs/panel_setup_text_and_graphics_base.cpp:156
msgid ""
"When checked, \"1.2300\" will be rendered as \"1.23\" even if precision is "
"set to show more digits"
msgstr ""
"체크할 경우, 정밀도가 더 많은 자리수를 표시하도록 설정되어 있더라도"
"\"1.2300\"은 \"1.23\"으로 표시됩니다"

#: pcbnew/dialogs/panel_setup_tracks_and_vias.cpp:373
msgid "No via hole size defined."
msgstr "비아 홀 크기가 정의되지 않았습니다."

#: pcbnew/dialogs/panel_setup_tracks_and_vias.cpp:387
msgid "No differential pair gap defined."
msgstr "차동 쌍 간격이 정의되지 않았습니다."

#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:52
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:117
#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:183
msgid "7"
msgstr "7"

#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:105 pcbnew/pad.cpp:1056
#: pcbnew/pcb_track.cpp:1141 pcbnew/pcb_track.cpp:1522
#: pcbnew/tools/board_inspection_tool.cpp:1029
#: pcbnew/tools/board_inspection_tool.cpp:1058
msgid "Hole"
msgstr "홀"

#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:153
msgid "Differential pairs:"
msgstr "차동 쌍:"

#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:170
msgid "Gap"
msgstr "간격"

#: pcbnew/dialogs/panel_setup_tracks_and_vias_base.cpp:171
msgid "Via Gap"
msgstr "비아 간격"

#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:19
#, fuzzy
msgid "Default properties for single-track tuning:"
msgstr "새 그래픽 항목에 대한 기본 속성:"

#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:148
#, fuzzy
msgid "Default properties for differential-pairs:"
msgstr "새 그래픽 항목에 대한 기본 속성:"

#: pcbnew/dialogs/panel_setup_tuning_patterns_base.cpp:277
#, fuzzy
msgid "Default properties for differential-pair skews:"
msgstr "새 그래픽 항목에 대한 기본 속성:"

#: pcbnew/drc/drc_cache_generator.cpp:123
msgid "Gathering copper items..."
msgstr "구리 개체를 모으는 중..."

#: pcbnew/drc/drc_engine.cpp:146
msgid "board setup constraints"
msgstr "보드 설정 제약 조건"

#: pcbnew/drc/drc_engine.cpp:172
msgid "board setup constraints zone fill strategy"
msgstr "보드의 구역 채우기 전략 제한"

#: pcbnew/drc/drc_engine.cpp:177
msgid "board setup constraints silk"
msgstr "기판 구성 제약 실크"

#: pcbnew/drc/drc_engine.cpp:183
msgid "board setup constraints silk text height"
msgstr "보드의 최대 실크 텍스트 높이 제한"

#: pcbnew/drc/drc_engine.cpp:189
msgid "board setup constraints silk text thickness"
msgstr "보드의 최대 실크 텍스트 두께 제한"

#: pcbnew/drc/drc_engine.cpp:195
msgid "board setup constraints hole"
msgstr "기판 구성 제약 홀"

#: pcbnew/drc/drc_engine.cpp:200
msgid "board setup constraints edge"
msgstr "기판 구성 제약 모서리"

#: pcbnew/drc/drc_engine.cpp:205
msgid "board setup constraints courtyard"
msgstr "부품자리 제약조건 기판 설정"

#: pcbnew/drc/drc_engine.cpp:212
msgid "board setup micro-via constraints"
msgstr "기판 설정 마이크로 비아 제약"

#: pcbnew/drc/drc_engine.cpp:246 pcbnew/drc/drc_engine.cpp:325
#, c-format
msgid "netclass '%s'"
msgstr "네트클래스 '%s'"

#: pcbnew/drc/drc_engine.cpp:272 pcbnew/drc/drc_engine.cpp:290
#: pcbnew/drc/drc_engine.cpp:307
#, c-format
msgid "netclass '%s' (diff pair)"
msgstr "네트클래스 '%s' (차동 쌍)"

#: pcbnew/drc/drc_engine.cpp:353
#, fuzzy, c-format
msgid "netclass '%s' (uvia)"
msgstr "네트클래스 '%s' (차동 쌍)"

#: pcbnew/drc/drc_engine.cpp:428
msgid "keepout area"
msgstr "금지 영역"

#: pcbnew/drc/drc_engine.cpp:430
#, c-format
msgid "keepout area '%s'"
msgstr "금지 영역 '%s'"

#: pcbnew/drc/drc_engine.cpp:624
#, c-format
msgid "Resolved zone connection type: %s."
msgstr "확인된 영역 연결 유형: %s."

#: pcbnew/drc/drc_engine.cpp:642
#, c-format
msgid "Pad is not a through hole pad; connection will be: %s."
msgstr "패드는 PTH 패드가 아닙니다; %s가 연결 됩니다."

#: pcbnew/drc/drc_engine.cpp:759 pcbnew/drc/drc_engine.cpp:769
#, c-format
msgid "Local override on %s; clearance: %s."
msgstr "%s에 대한 지역 재정의; 클리어런스: %s."

#: pcbnew/drc/drc_engine.cpp:784 pcbnew/drc/drc_engine.cpp:1392
#: pcbnew/drc/drc_engine.cpp:1408
msgid "board minimum"
msgstr "기판 최소값"

#: pcbnew/drc/drc_engine.cpp:787 pcbnew/drc/drc_engine.cpp:1386
#: pcbnew/drc/drc_engine.cpp:1402
#, c-format
msgid "Board minimum clearance: %s."
msgstr "보드 최소 클리어런스: %s."

#: pcbnew/drc/drc_engine.cpp:796
msgid "board minimum hole"
msgstr "기판 최소 홀"

#: pcbnew/drc/drc_engine.cpp:799
#, c-format
msgid "Board minimum hole clearance: %s."
msgstr "기판 최소 홀 클리어런스: %s."

#: pcbnew/drc/drc_engine.cpp:818
#, c-format
msgid "Local override on %s; zone connection: %s."
msgstr "%s에 대한 로컬 재정의; 영역연결: %s."

#: pcbnew/drc/drc_engine.cpp:835
#, c-format
msgid "Local override on %s; thermal relief gap: %s."
msgstr "%s의 로컬 재정의; 단열판 갭: %s."

#: pcbnew/drc/drc_engine.cpp:852
#, c-format
msgid "Local override on %s; thermal spoke width: %s."
msgstr "%s의 로컬 재정의; 단열 스포크 너바: %s."

#: pcbnew/drc/drc_engine.cpp:861
#, c-format
msgid "%s min thickness: %s."
msgstr "%s 최소 두께 : %s."

#: pcbnew/drc/drc_engine.cpp:875
#, c-format
msgid "Checking assertion \"%s\"."
msgstr "규칙 \"%s\" 확인 중."

#: pcbnew/drc/drc_engine.cpp:881 pcbnew/drc/drc_engine.cpp:1512
msgid "Assertion passed."
msgstr "규칙이 통과되었습니다."

#: pcbnew/drc/drc_engine.cpp:885 pcbnew/drc/drc_engine.cpp:1516
msgid "--> Assertion failed. <--"
msgstr "--> 규칙에 실패했습니다. <--"

#: pcbnew/drc/drc_engine.cpp:905
#, c-format
msgid "Checking %s clearance: %s."
msgstr "%s 클리어런스 확인 중: %s."

#: pcbnew/drc/drc_engine.cpp:911
#, c-format
msgid "Checking %s max uncoupled length: %s."
msgstr "%s의 결합되지 않은 최대 길이 확인중: %s."

#: pcbnew/drc/drc_engine.cpp:917
#, c-format
msgid "Checking %s max skew: %s."
msgstr "확인 중 %s 최대 왜곡구간: %s."

#: pcbnew/drc/drc_engine.cpp:923
#, c-format
msgid "Checking %s gap: %s."
msgstr "%s 간격 확인: %s."

#: pcbnew/drc/drc_engine.cpp:929
#, c-format
msgid "Checking %s thermal spoke width: %s."
msgstr "%s의 단열 스포크 폭 확인 중: %s."

#: pcbnew/drc/drc_engine.cpp:935
#, c-format
msgid "Checking %s min spoke count: %s."
msgstr "확인 중 %s 최소 스포크 개수: %s."

#: pcbnew/drc/drc_engine.cpp:942
#, c-format
msgid "Checking %s zone connection: %s."
msgstr "%s 영역 연결 확인: %s."

#: pcbnew/drc/drc_engine.cpp:974
#, c-format
msgid "Checking %s track width: opt %s."
msgstr "확인 중 %s 배선 폭: 선택 %s."

#: pcbnew/drc/drc_engine.cpp:980
#, fuzzy, c-format
msgid "Checking %s track width: min %s."
msgstr "확인 중 %s 배선 폭: 선택 %s."

#: pcbnew/drc/drc_engine.cpp:988
#, c-format
msgid "Checking %s annular width: min %s."
msgstr "확인 중 %s 랜드 폭: 최소 %s."

#: pcbnew/drc/drc_engine.cpp:996
#, c-format
msgid "Checking %s via diameter: opt %s."
msgstr "%s 비아 직경 확인: 선택 %s."

#: pcbnew/drc/drc_engine.cpp:1002
#, fuzzy, c-format
msgid "Checking %s via diameter: min %s."
msgstr "%s 비아 직경 확인: 선택 %s."

#: pcbnew/drc/drc_engine.cpp:1011
#, c-format
msgid "Checking %s hole size: opt %s."
msgstr "확인 중 %s 홀 크기: 선택 %s."

#: pcbnew/drc/drc_engine.cpp:1017
#, fuzzy, c-format
msgid "Checking %s hole size: min %s."
msgstr "확인 중 %s 홀 크기: 선택 %s."

#: pcbnew/drc/drc_engine.cpp:1027
#, c-format
msgid "Checking %s: min %s."
msgstr "확인 중 %s: 최소 %s."

#: pcbnew/drc/drc_engine.cpp:1035
#, c-format
msgid "Checking %s diff pair gap: opt %s."
msgstr "%s의 차동 쌍 유격 확인 중: 선택 %s."

#: pcbnew/drc/drc_engine.cpp:1041
#, fuzzy, c-format
msgid "Checking %s clearance: min %s."
msgstr "%s 클리어런스 확인 중: %s."

#: pcbnew/drc/drc_engine.cpp:1049
#, fuzzy, c-format
msgid "Checking %s hole to hole: min %s."
msgstr "확인 중 %s 홀 크기: 선택 %s."

#: pcbnew/drc/drc_engine.cpp:1055 pcbnew/drc/drc_engine.cpp:1081
#: pcbnew/drc/drc_engine.cpp:1525
#, c-format
msgid "Checking %s."
msgstr "%s 확인 중."

#: pcbnew/drc/drc_engine.cpp:1070
#, c-format
msgid "Checking %s: min %s; opt %s; max %s."
msgstr "%s 확인 중: 최소 %s; 최적 %s; 최대 %s."

#: pcbnew/drc/drc_engine.cpp:1091
#, fuzzy
msgid "Netclass clearances apply only between copper items."
msgstr "기판과 네트클래스 클리어런스는 구리 개체 사이에만 적용됩니다."

#: pcbnew/drc/drc_engine.cpp:1095 pcbnew/drc/drc_engine.cpp:1100
#, fuzzy, c-format
msgid "%s contains no copper.  Rule ignored."
msgstr "%s는 드릴 구멍이 아닙니다. 규칙이 무시되었습니다."

#: pcbnew/drc/drc_engine.cpp:1156
msgid "Keepout constraint not met."
msgstr "킵아웃 제약 조건을 충족하지 못함."

#: pcbnew/drc/drc_engine.cpp:1158
msgid "Disallow constraint not met."
msgstr "제약 조건이 충족되지 않은 경우 허용 안 함."

#: pcbnew/drc/drc_engine.cpp:1180
msgid "Keepout layer(s) not matched."
msgstr "킵아웃 레이어가 일치하지 않습니다."

#: pcbnew/drc/drc_engine.cpp:1184 pcbnew/drc/drc_engine.cpp:1205
#: pcbnew/drc/drc_engine.cpp:1529
#, c-format
msgid "Rule layer '%s' not matched; rule ignored."
msgstr "규칙 레이어 '%s' 일치하지 않음; 규칙이 무시되었습니다."

#: pcbnew/drc/drc_engine.cpp:1189 pcbnew/drc/drc_engine.cpp:1210
msgid "Rule layer not matched; rule ignored."
msgstr "규칙 레이어가 일치하지 않음; 규칙이 무시되었습니다."

#: pcbnew/drc/drc_engine.cpp:1201
#, fuzzy
msgid "Constraint layer not matched."
msgstr "킵아웃 레이어가 일치하지 않습니다."

#: pcbnew/drc/drc_engine.cpp:1221
#, c-format
msgid "%s is not a drilled hole; rule ignored."
msgstr "%s는 드릴 구멍이 아닙니다. 규칙이 무시되었습니다."

#: pcbnew/drc/drc_engine.cpp:1231
msgid "Unconditional constraint applied."
msgstr "무조건 제약 조건 적용."

#: pcbnew/drc/drc_engine.cpp:1235 pcbnew/drc/drc_engine.cpp:1535
msgid "Unconditional rule applied."
msgstr "조건 없는 규칙이 적용되었습니다."

#: pcbnew/drc/drc_engine.cpp:1240
msgid "Unconditional rule applied; overrides previous constraints."
msgstr "무조건 규칙 적용; 이전 제약 조건을 무시합니다."

#: pcbnew/drc/drc_engine.cpp:1254 pcbnew/drc/drc_engine.cpp:1540
#, c-format
msgid "Checking rule condition \"%s\"."
msgstr "규칙 조건 \"%s\" 확인 중."

#: pcbnew/drc/drc_engine.cpp:1264
msgid "Constraint applied."
msgstr "제약이 적용되었습니다."

#: pcbnew/drc/drc_engine.cpp:1268 pcbnew/drc/drc_engine.cpp:1546
msgid "Rule applied."
msgstr "규칙 적용."

#: pcbnew/drc/drc_engine.cpp:1273
msgid "Rule applied; overrides previous constraints."
msgstr "규칙이 적용되었습니다; 이전 제약은 재정의되었습니다."

#: pcbnew/drc/drc_engine.cpp:1281
msgid "Membership not satisfied; constraint ignored."
msgstr "멤버십을 만족하지 못하였습니다; 제약은 무시됩니다."

#: pcbnew/drc/drc_engine.cpp:1282 pcbnew/drc/drc_engine.cpp:1551
msgid "Condition not satisfied; rule ignored."
msgstr "조건을 만족하지 못하였습니다; 규칙은 무시됩니다."

#: pcbnew/drc/drc_engine.cpp:1342 pcbnew/drc/drc_engine.cpp:1364
#, fuzzy, c-format
msgid "Local clearance on %s: %s."
msgstr "%s의 지역 클리어런스 값; 클리어런스: %s."

#: pcbnew/drc/drc_engine.cpp:1423
#, c-format
msgid "%s zone connection: %s."
msgstr "%s 영역 연결: %s."

#: pcbnew/drc/drc_engine.cpp:1439
#, c-format
msgid "%s pad connection: %s."
msgstr "%s 패드 연결: %s."

#: pcbnew/drc/drc_engine.cpp:1444 pcbnew/drc/drc_engine.cpp:1461
#: pcbnew/drc/drc_engine.cpp:1478 pcbnew/zone.cpp:384 pcbnew/zone.cpp:495
msgid "zone"
msgstr "구역"

#: pcbnew/drc/drc_engine.cpp:1456
#, c-format
msgid "%s thermal relief gap: %s."
msgstr "%s 단열판 갭: %s."

#: pcbnew/drc/drc_engine.cpp:1473
#, c-format
msgid "%s thermal spoke width: %s."
msgstr "%s 단열 스포크 폭: %s."

#: pcbnew/drc/drc_engine.cpp:1506
#, c-format
msgid "Checking rule assertion \"%s\"."
msgstr "규칙 조건 \"%s\" 확인 중."

#: pcbnew/drc/drc_item.cpp:45 pcbnew/zone.cpp:1716
msgid "Electrical"
msgstr "전기"

#: pcbnew/drc/drc_item.cpp:46
msgid "Design for Manufacturing"
msgstr "제조용 설계"

#: pcbnew/drc/drc_item.cpp:47
msgid "Schematic Parity"
msgstr "회로도 동등성"

#: pcbnew/drc/drc_item.cpp:48
msgid "Signal Integrity"
msgstr "신호 무결성"

#: pcbnew/drc/drc_item.cpp:49
msgid "Readability"
msgstr "가독성"

#: pcbnew/drc/drc_item.cpp:53
msgid "Missing connection between items"
msgstr "개체 간의 연결 누락"

#: pcbnew/drc/drc_item.cpp:57
msgid "Items shorting two nets"
msgstr "두 개의 네트를 단락시키는 개체"

#: pcbnew/drc/drc_item.cpp:61
msgid "Items not allowed"
msgstr "허용되지 않은 개체"

#: pcbnew/drc/drc_item.cpp:65
msgid "Text (or dimension) on Edge.Cuts layer"
msgstr "Edge.Cuts 레이어의 텍스트 (또는 치수)"

#: pcbnew/drc/drc_item.cpp:69
msgid "Clearance violation"
msgstr "클리어런스 위반"

#: pcbnew/drc/drc_item.cpp:73
msgid "Tracks crossing"
msgstr "배선 교차"

#: pcbnew/drc/drc_item.cpp:77
msgid "Board edge clearance violation"
msgstr "기판 모서리 클리어런스 위반"

#: pcbnew/drc/drc_item.cpp:81
msgid "Copper zones intersect"
msgstr "구리 영역 교차"

#: pcbnew/drc/drc_item.cpp:85
msgid "Isolated copper fill"
msgstr "격리된 구리 채움"

#: pcbnew/drc/drc_item.cpp:89
msgid "Thermal relief connection to zone incomplete"
msgstr "불완전한 영역에 대한 열 방출 연결"

#: pcbnew/drc/drc_item.cpp:93
msgid "Via is not connected or connected on only one layer"
msgstr "비아가 연결되지 않았거나 단 하나의 레이어에만 연결됨"

#: pcbnew/drc/drc_item.cpp:97
msgid "Track has unconnected end"
msgstr "배선에 연결되지 않은 끝이 존재"

#: pcbnew/drc/drc_item.cpp:101
msgid "Hole clearance violation"
msgstr "홀 클리어런스 위반"

#: pcbnew/drc/drc_item.cpp:105
msgid "Drilled holes too close together"
msgstr "드릴된 홀이 너무 가까움"

#: pcbnew/drc/drc_item.cpp:109
msgid "Drilled holes co-located"
msgstr "드릴된 홀이 너무 가까이 배치됨"

#: pcbnew/drc/drc_item.cpp:113
msgid "Copper connection too narrow"
msgstr "구리 도선 연결이 너무 좁습니다"

#: pcbnew/drc/drc_item.cpp:117
msgid "Track width"
msgstr "배선 두께"

#: pcbnew/drc/drc_item.cpp:121
msgid "Annular width"
msgstr "환형 폭"

#: pcbnew/drc/drc_item.cpp:125
#, fuzzy
msgid "Hole size out of range"
msgstr "드릴 허용 범위 벗어남"

#: pcbnew/drc/drc_item.cpp:129
msgid "Via diameter"
msgstr "비아 지름"

#: pcbnew/drc/drc_item.cpp:133
msgid "Padstack is not valid"
msgstr "패드스택이 유효하지 않음"

#: pcbnew/drc/drc_item.cpp:137
#, fuzzy
msgid "Micro via hole size out of range"
msgstr "마이크로 비아 드릴 허용 범위 초과"

#: pcbnew/drc/drc_item.cpp:141
msgid "Courtyards overlap"
msgstr "부품자리 겹침"

#: pcbnew/drc/drc_item.cpp:145
msgid "Footprint has no courtyard defined"
msgstr "풋프린트에 부품자리가 정의되지 않음"

#: pcbnew/drc/drc_item.cpp:149
msgid "Footprint has malformed courtyard"
msgstr "풋프린트에 잘못된 부품자리가 있음"

#: pcbnew/drc/drc_item.cpp:153
msgid "PTH inside courtyard"
msgstr "부품자리 내부에 PTH 있음"

#: pcbnew/drc/drc_item.cpp:157
msgid "NPTH inside courtyard"
msgstr "부품자리 내부에 NPTH 있음"

#: pcbnew/drc/drc_item.cpp:161
msgid "Item on a disabled copper layer"
msgstr "비활성화된 구리 레이어의 항목"

#: pcbnew/drc/drc_item.cpp:165
msgid "Board has malformed outline"
msgstr "보드에 잘못된 외곽선 존재"

#: pcbnew/drc/drc_item.cpp:169
msgid "Duplicate footprints"
msgstr "중복된 풋프린트"

#: pcbnew/drc/drc_item.cpp:173
msgid "Missing footprint"
msgstr "풋프린트 누락됨"

#: pcbnew/drc/drc_item.cpp:177
msgid "Extra footprint"
msgstr "여분의 풋프린트 존재"

#: pcbnew/drc/drc_item.cpp:181
msgid "Pad net doesn't match schematic"
msgstr "패드 네트와 회로도가 불일치"

#: pcbnew/drc/drc_item.cpp:185
#, fuzzy
msgid "Footprint attributes don't match symbol"
msgstr "풋프린트 라이브러리의 사본과 일치하지 않음"

#: pcbnew/drc/drc_item.cpp:189
msgid "Footprint not found in libraries"
msgstr "라이브러리에서 풋프린트를 찾을 수 없음"

#: pcbnew/drc/drc_item.cpp:193
msgid "Footprint doesn't match copy in library"
msgstr "풋프린트 라이브러리의 사본과 일치하지 않음"

#: pcbnew/drc/drc_item.cpp:201
msgid "Assertion failure"
msgstr "규칙 실패"

#: pcbnew/drc/drc_item.cpp:205
msgid "Copper sliver"
msgstr "구리 슬리버"

#: pcbnew/drc/drc_item.cpp:209
msgid "Solder mask aperture bridges items with different nets"
msgstr "다른 네트를 가진 솔더 마스크 조리개 브리지 항목"

#: pcbnew/drc/drc_item.cpp:213
msgid "Silkscreen clipped by solder mask"
msgstr "실크스크린 영역이 솔더 마스크 영역에 의해 잘림"

#: pcbnew/drc/drc_item.cpp:217
msgid "Silkscreen clipped by board edge"
msgstr "보드 가장자리로 클리핑 된 실크 스크린"

#: pcbnew/drc/drc_item.cpp:221
msgid "Silkscreen overlap"
msgstr "실크스크린 겹침"

#: pcbnew/drc/drc_item.cpp:225
msgid "Text height out of range"
msgstr "텍스트 높이가 범위를 벗어남"

#: pcbnew/drc/drc_item.cpp:229
msgid "Text thickness out of range"
msgstr "텍스트 두께가 범위를 벗어남"

#: pcbnew/drc/drc_item.cpp:233
msgid "Trace length out of range"
msgstr "추적 길이 허용 범위 벗어남"

#: pcbnew/drc/drc_item.cpp:237
msgid "Skew between traces out of range"
msgstr "배선 간 스큐가 허용 범위 벗어남"

#: pcbnew/drc/drc_item.cpp:241
msgid "Too many vias on a connection"
msgstr "연결에 비아 너무 많음"

#: pcbnew/drc/drc_item.cpp:245
msgid "Differential pair gap out of range"
msgstr "차동 쌍 간격이 허용 범위 벗어남"

#: pcbnew/drc/drc_item.cpp:249
msgid "Differential uncoupled length too long"
msgstr "차동 비결합 길이 너무 긺"

#: pcbnew/drc/drc_item.cpp:253
msgid "Footprint is not valid"
msgstr "Footprint는 유효하지 않습니다"

#: pcbnew/drc/drc_item.cpp:257
msgid "Footprint component type doesn't match footprint pads"
msgstr "풋프린트 컴포넌트 유형이 풋프린트 패드와 일치하지 않습니다"

#: pcbnew/drc/drc_item.cpp:261
msgid "Through hole pad has no hole"
msgstr "스루홀 패드에 구멍이 없음"

#: pcbnew/drc/drc_item.cpp:434
#, c-format
msgid "Rule: %s"
msgstr "규칙: %s"

#: pcbnew/drc/drc_item.cpp:436
msgid "Local override"
msgstr "지역 재정의"

#: pcbnew/drc/drc_rule.h:156
#, fuzzy, c-format
msgid "rule '%s'"
msgstr "규칙 %s"

#: pcbnew/drc/drc_rule_condition.cpp:52
msgid "ERROR in expression."
msgstr "표현식에 오류가 있습니다."

#: pcbnew/drc/drc_rule_condition.cpp:100 pcbnew/drc/drc_rule_parser.cpp:61
#: pcbnew/drc/drc_rule_parser.cpp:573
#, c-format
msgid "ERROR: <a href='%d:%d'>%s</a>%s"
msgstr "오류: <a href='%d:%d'>%s</a>%s"

#: pcbnew/drc/drc_rule_parser.cpp:68 pcbnew/drc/drc_rule_parser.cpp:580
#, c-format
msgid "ERROR: %s%s"
msgstr "오류: %s%s"

#: pcbnew/drc/drc_rule_parser.cpp:79
#, c-format
msgid "The '%s' keyword has been deprecated.  Please use '%s' instead."
msgstr "'%s' 키워드는 더 이상 사용되지 않습니다.  대신 '%s'를 사용하십시오."

#: pcbnew/drc/drc_rule_parser.cpp:117 pcbnew/drc/drc_rule_parser.cpp:200
#: pcbnew/drc/drc_rule_parser.cpp:477
msgid "Missing '('."
msgstr "'('가 누락되었습니다."

#: pcbnew/drc/drc_rule_parser.cpp:123
msgid "Missing version statement."
msgstr "버전 설명이 누락되었습니다."

#: pcbnew/drc/drc_rule_parser.cpp:135
msgid "Missing version number."
msgstr "버전 번호가 누락되었습니다."

#: pcbnew/drc/drc_rule_parser.cpp:147
#, c-format
msgid "Unrecognized item '%s'.| Expected version number."
msgstr "인식할 수 없는 항목 '%s'.| 버전 번호가 필요합니다."

#: pcbnew/drc/drc_rule_parser.cpp:154 pcbnew/drc/drc_rule_parser.cpp:233
#: pcbnew/drc/drc_rule_parser.cpp:466 pcbnew/drc/drc_rule_parser.cpp:497
#: pcbnew/drc/drc_rule_parser.cpp:518 pcbnew/drc/drc_rule_parser.cpp:538
#: pcbnew/drc/drc_rule_parser.cpp:636
#, c-format
msgid "Unrecognized item '%s'."
msgstr "인식할 수 없는 항목 '%s'."

#: pcbnew/drc/drc_rule_parser.cpp:167 pcbnew/drc/drc_rule_parser.cpp:249
#: pcbnew/drc/drc_rule_parser.cpp:545
msgid "Incomplete statement."
msgstr "불완전한 선언입니다."

#: pcbnew/drc/drc_rule_parser.cpp:171 pcbnew/drc/drc_rule_parser.cpp:253
#: pcbnew/drc/drc_rule_parser.cpp:332 pcbnew/drc/drc_rule_parser.cpp:376
#: pcbnew/drc/drc_rule_parser.cpp:408 pcbnew/drc/drc_rule_parser.cpp:549
#: pcbnew/drc/drc_rule_parser.cpp:665
#, c-format
msgid "Unrecognized item '%s'.| Expected %s."
msgstr "인식할 수 없는 항목 '%s'.| %s이(가) 필요합니다."

#: pcbnew/drc/drc_rule_parser.cpp:193
msgid "Missing rule name."
msgstr "규칙 이름이 누락되었습니다."

#: pcbnew/drc/drc_rule_parser.cpp:215
msgid "Missing condition expression."
msgstr "조건식이 누락되었습니다."

#: pcbnew/drc/drc_rule_parser.cpp:226 pcbnew/drc/drc_rule_parser.cpp:460
#, c-format
msgid "Unrecognized item '%s'.| Expected quoted expression."
msgstr "인식할 수 없는 항목 '%s'.| 인용 표현식이 필요합니다."

#: pcbnew/drc/drc_rule_parser.cpp:261 pcbnew/drc/drc_rule_parser.cpp:372
#: pcbnew/drc/drc_rule_parser.cpp:385 pcbnew/drc/drc_rule_parser.cpp:404
#: pcbnew/drc/drc_rule_parser.cpp:415 pcbnew/drc/drc_rule_parser.cpp:441
#: pcbnew/drc/drc_rule_parser.cpp:558 pcbnew/drc/drc_rule_parser.cpp:673
msgid "Missing ')'."
msgstr "')'가 누락되었습니다."

#: pcbnew/drc/drc_rule_parser.cpp:292
#, c-format
msgid "Missing constraint type.|  Expected %s."
msgstr "제약 형식이 누락되었습니다.|  %s이(가) 필요합니다."

#: pcbnew/drc/drc_rule_parser.cpp:344
#, c-format
msgid "Rule already has a '%s' constraint."
msgstr "규칙에 이미 '%s' 제약이 포함되어 있습니다."

#: pcbnew/drc/drc_rule_parser.cpp:436
msgid "Expecting number."
msgstr "예상 번호."

#: pcbnew/drc/drc_rule_parser.cpp:451
msgid "Missing assertion expression."
msgstr "규칙 조건이 누락되었습니다."

#: pcbnew/drc/drc_rule_parser.cpp:488
msgid "Missing min value."
msgstr "최소값이 누락되었습니다."

#: pcbnew/drc/drc_rule_parser.cpp:508
msgid "Missing max value."
msgstr "최대값이 누락되었습니다."

#: pcbnew/drc/drc_rule_parser.cpp:529
msgid "Missing opt value."
msgstr "최적값이 누락되었습니다."

#: pcbnew/drc/drc_rule_parser.cpp:603
msgid "Missing layer name or type."
msgstr "레이어 이름 또는 형식이 누락되었습니다."

#: pcbnew/drc/drc_rule_parser.cpp:629
#, c-format
msgid "Unrecognized layer '%s'."
msgstr "인식할 수 없는 레이어 '%s'."

#: pcbnew/drc/drc_rule_parser.cpp:653
msgid "Missing severity name."
msgstr "심각도 이름이 없음."

#: pcbnew/drc/drc_test_provider_annular_width.cpp:88
msgid "Checking pad & via annular rings..."
msgstr "패드와 비아 환형 링 확인 중..."

#: pcbnew/drc/drc_test_provider_annular_width.cpp:248
#, c-format
msgid "(%s min annular width %s; actual %s)"
msgstr "(%s 최소 랜드 폭 %s; 실제 값 %s)"

#: pcbnew/drc/drc_test_provider_annular_width.cpp:256
#, c-format
msgid "(%s max annular width %s; actual %s)"
msgstr "(%s 최대 환형 폭 %s; 실제 값 %s)"

#: pcbnew/drc/drc_test_provider_connection_width.cpp:625
msgid "Checking nets for minimum connection width..."
msgstr "네트의 최소 연결 너비 확인 중..."

#: pcbnew/drc/drc_test_provider_connection_width.cpp:768
#, c-format
msgid "(%s minimum connection width %s; actual %s)"
msgstr "(%s 최소 연결 폭 %s; 실제 %s)"

#: pcbnew/drc/drc_test_provider_connectivity.cpp:71
msgid "Checking pad, via and zone connections..."
msgstr "패드, 비아와 영역 연결 확인 중..."

#: pcbnew/drc/drc_test_provider_connectivity.cpp:139
msgid "Checking net connections..."
msgstr "네트 연결 확인 중..."

#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:141
msgid "Checking track & via clearances..."
msgstr "배선과 비아 클리어런스 확인 중..."

#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:148
msgid "Checking hole clearances..."
msgstr "홀 클리어런스 확인 중..."

#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:156
msgid "Checking pad clearances..."
msgstr "패드 클리어런스 확인 중..."

#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:164
msgid "Checking pads..."
msgstr "패드 확인 중..."

#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:172
msgid "Checking copper graphic clearances..."
msgstr "구리 영역 간격을 확인 중..."

#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:180
msgid "Checking copper zone clearances..."
msgstr "구리 영역 클리어런스 확인 중..."

#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:268
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:535
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:795
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:828
#, c-format
msgid "(nets %s and %s)"
msgstr "(네트 %s 와 %s)"

#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:283
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:338
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:419
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:458
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:542
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:841
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:873
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:894
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:915
#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:1366
#: pcbnew/drc/drc_test_provider_courtyard_clearance.cpp:232
#: pcbnew/drc/drc_test_provider_courtyard_clearance.cpp:265
#: pcbnew/drc/drc_test_provider_edge_clearance.cpp:118
#: pcbnew/drc/drc_test_provider_physical_clearance.cpp:580
#: pcbnew/drc/drc_test_provider_physical_clearance.cpp:638
#: pcbnew/drc/drc_test_provider_physical_clearance.cpp:716
#: pcbnew/drc/drc_test_provider_physical_clearance.cpp:732
#: pcbnew/drc/drc_test_provider_physical_clearance.cpp:820
#: pcbnew/drc/drc_test_provider_physical_clearance.cpp:859
#: pcbnew/drc/drc_test_provider_silk_clearance.cpp:235
#: pcbnew/drc/drc_test_provider_solder_mask.cpp:298
#, c-format
msgid "(%s clearance %s; actual %s)"
msgstr "(%s 클리어런스 %s; 실제 값 %s)"

#: pcbnew/drc/drc_test_provider_copper_clearance.cpp:339
#, c-format
msgid "(%s clearance %s; actual < 0)"
msgstr "(%s 클리어런스 %s; 실제값 < 0)"

#: pcbnew/drc/drc_test_provider_courtyard_clearance.cpp:85
msgid "Checking footprint courtyard definitions..."
msgstr "풋프린트 부품자리 정의 확인 중..."

#: pcbnew/drc/drc_test_provider_courtyard_clearance.cpp:90
msgid "Gathering footprint courtyards..."
msgstr "풋프린트 부품자리 모으는 중..."

#: pcbnew/drc/drc_test_provider_courtyard_clearance.cpp:150
msgid "Checking footprints for overlapping courtyards..."
msgstr "겹치는 부품자리 풋프린트 확인 중..."

#: pcbnew/drc/drc_test_provider_diff_pair_coupling.cpp:457
#, c-format
msgid "(%s maximum uncoupled length %s; actual %s)"
msgstr "(%s 최대 비결합 길이 %s, 실제 %s)"

#: pcbnew/drc/drc_test_provider_diff_pair_coupling.cpp:525
#, c-format
msgid "(%s minimum gap %s; actual %s)"
msgstr "(%s 최소 간격 %s; 실제 %s)"

#: pcbnew/drc/drc_test_provider_diff_pair_coupling.cpp:532
#, c-format
msgid "(%s maximum gap %s; actual %s)"
msgstr "(%s 최대 간격 %s; 실제 %s)"

#: pcbnew/drc/drc_test_provider_disallow.cpp:72
msgid "Checking keepouts & disallow constraints..."
msgstr "킵아웃 및 불허 제약 조건 확인..."

#: pcbnew/drc/drc_test_provider_edge_clearance.cpp:150
msgid "Checking copper to board edge clearances..."
msgstr "구리와 기판 모서리 클리어런스 확인 중..."

#: pcbnew/drc/drc_test_provider_edge_clearance.cpp:155
msgid "Checking silk to board edge clearances..."
msgstr "실크에서 기판까지 모서리 클리어런스 확인 중..."

#: pcbnew/drc/drc_test_provider_hole_size.cpp:75
msgid "Checking pad holes..."
msgstr "패드 홀 확인 중..."

#: pcbnew/drc/drc_test_provider_hole_size.cpp:93
msgid "Checking via holes..."
msgstr "비아 홀 확인 중..."

#: pcbnew/drc/drc_test_provider_hole_size.cpp:98
msgid "Checking micro-via holes..."
msgstr "마이크로 비아 홀 확인 중..."

#: pcbnew/drc/drc_test_provider_hole_size.cpp:158
#: pcbnew/drc/drc_test_provider_hole_size.cpp:227
#: pcbnew/drc/drc_test_provider_track_width.cpp:133
#, c-format
msgid "(%s min width %s; actual %s)"
msgstr "(%s 최소 폭 %s; 실제 값 %s)"

#: pcbnew/drc/drc_test_provider_hole_size.cpp:165
#: pcbnew/drc/drc_test_provider_hole_size.cpp:234
#: pcbnew/drc/drc_test_provider_track_width.cpp:140
#, c-format
msgid "(%s max width %s; actual %s)"
msgstr "(%s 최대 폭 %s; 실제 값 %s)"

#: pcbnew/drc/drc_test_provider_hole_to_hole.cpp:120
msgid "Checking hole to hole clearances..."
msgstr "홀과 홀 사이 클리어런스 확인 중..."

#: pcbnew/drc/drc_test_provider_hole_to_hole.cpp:304
#, c-format
msgid "(%s min %s; actual %s)"
msgstr "(%s 최소 값 %s; 실제 값 %s)"

#: pcbnew/drc/drc_test_provider_library_parity.cpp:123
#, c-format
msgid "Pad %s"
msgstr "패드 %s"

#: pcbnew/drc/drc_test_provider_library_parity.cpp:200
#, c-format
msgid "%s has clearance override."
msgstr "%s에 클리어런스 재정의가 있음."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:202
#, c-format
msgid "%s has solder mask expansion override."
msgstr "%s 에 솔더 마스크 확장 재정의가 있음."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:204
#: pcbnew/drc/drc_test_provider_library_parity.cpp:206
#, c-format
msgid "%s has solder paste clearance override."
msgstr "%s에 솔더 페이스트 간격 재정의가 있음."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:209
#, c-format
msgid "%s has zone connection override."
msgstr "%s에 영역 연결 재정의가 있음."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:211
#, fuzzy, c-format
msgid "%s has thermal relief gap override."
msgstr "%s 방열 간격이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:213
#, fuzzy, c-format
msgid "%s has thermal relief spoke width override."
msgstr "해결된 단열판 스포크 너비: %s."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:215
#, fuzzy, c-format
msgid "%s has thermal relief spoke angle override."
msgstr "해결된 단열판 스포크 너비: %s."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:217
#, c-format
msgid "%s has zone knockout setting override."
msgstr "%s에 영역 녹아웃 설정 재정의가 있음."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:228
#, fuzzy, c-format
msgid "%s pad to die length differs."
msgstr "%s 해치 너비가 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:230
#, fuzzy, c-format
msgid "%s position differs."
msgstr "%s 우선 순위가 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:233
#, c-format
msgid "%s has different numbers."
msgstr "%s의 숫자가 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:255
#: pcbnew/drc/drc_test_provider_library_parity.cpp:450
#, fuzzy, c-format
msgid "%s layers differ."
msgstr "%s 레이어는 필수입니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:261
#, fuzzy, c-format
msgid "%s pad shape type differs."
msgstr "%s 채움 유형이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:264
#, fuzzy, c-format
msgid "%s pad type differs."
msgstr "%s 채움 유형이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:266
#, fuzzy, c-format
msgid "%s fabrication property differs."
msgstr "%s 패드 연결 속성이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:271
#, c-format
msgid "%s orientation differs."
msgstr "%s 방향이 다름."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:274
#, fuzzy, c-format
msgid "%s size differs."
msgstr "%s 필드가 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:276
#, fuzzy, c-format
msgid "%s trapezoid delta differs."
msgstr "%s 필드가 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:284
#, fuzzy, c-format
msgid "%s rounded corners differ."
msgstr "%s 모서리가 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:295
#, fuzzy, c-format
msgid "%s chamfered corners differ."
msgstr "%s 모서리가 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:301
#, fuzzy, c-format
msgid "%s shape offset from hole differs."
msgstr "%s 패드 연결 속성이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:304
#, fuzzy, c-format
msgid "%s drill shape differs."
msgstr "%s 채움 유형이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:306
#, fuzzy, c-format
msgid "%s drill size differs."
msgstr "%s 채움 유형이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:344
#, fuzzy, c-format
msgid "%s shape primitives differ."
msgstr "%s 레이어는 필수입니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:428
#, c-format
msgid "%s corner smoothing setting differs."
msgstr "%s 모서리 다듬기 설정이 다름."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:430
#, c-format
msgid "%s corner smoothing radius differs."
msgstr "%s 모서리 다듬기 반경이 다름."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:432
#, c-format
msgid "%s name differs."
msgstr "%s 이름이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:434
#, c-format
msgid "%s priority differs."
msgstr "%s 우선 순위가 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:437
#, c-format
msgid "%s keep-out property differs."
msgstr "%s 금지 속성이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:439
#, c-format
msgid "%s keep out copper fill setting differs."
msgstr "%s 구리 채움 금지 설정이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:441
#, c-format
msgid "%s keep out footprints setting differs."
msgstr "%s 부품자리 금지 설정이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:443
#, c-format
msgid "%s keep out pads setting differs."
msgstr "%s 패드 차단 설정이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:445
#, fuzzy, c-format
msgid "%s keep out tracks setting differs."
msgstr "%s 트랙 유지 설정이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:447
#, c-format
msgid "%s keep out vias setting differs."
msgstr "%s 비아 금지 설정이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:453
#, c-format
msgid "%s pad connection property differs."
msgstr "%s 패드 연결 속성이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:455
#, fuzzy, c-format
msgid "%s local clearance differs."
msgstr "해결된 클리어런스: %s."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:457
#, c-format
msgid "%s thermal relief gap differs."
msgstr "%s 방열 간격이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:459
#, fuzzy, c-format
msgid "%s thermal relief spoke width differs."
msgstr "해결된 단열판 스포크 너비: %s."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:462
#, c-format
msgid "%s min thickness differs."
msgstr "%s 최소 두께가 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:465
#, c-format
msgid "%s remove islands setting differs."
msgstr "%s 아일랜드 제거 설정이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:467
#, c-format
msgid "%s minimum island size setting differs."
msgstr "%s 최소 아일랜드 크기 설정이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:470
#, c-format
msgid "%s fill type differs."
msgstr "%s 채움 유형이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:472
#, c-format
msgid "%s hatch width differs."
msgstr "%s 해치 너비가 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:474
#, c-format
msgid "%s hatch gap differs."
msgstr "%s 해치 간격이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:476
#, c-format
msgid "%s hatch orientation differs."
msgstr "%s 해치 방향이 다름."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:478
#, c-format
msgid "%s hatch smoothing level differs."
msgstr "%s 해치 다듬기 수준이 다름."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:480
#, c-format
msgid "%s hatch smoothing amount differs."
msgstr "%s 해치 다듬기 양이 다름."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:482
#, c-format
msgid "%s minimum hatch hole setting differs."
msgstr "%s 최소 해치 홀 설정이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:488
#, c-format
msgid "%s outline corner count differs."
msgstr "%s 외곽선 모서리 개수가 다름."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:503
#, c-format
msgid "%s corners differ."
msgstr "%s 모서리가 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:544
msgid "Footprint descriptions differ."
msgstr "풋프린트 설명이 다름."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:545
msgid "Footprint keywords differ."
msgstr "풋프린트 키워드가 다름."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:550
msgid "Footprint types differ."
msgstr "풋프린트 유형이 다름."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:553
#: pcbnew/drc/drc_test_provider_library_parity.cpp:557
#: pcbnew/drc/drc_test_provider_library_parity.cpp:561
#: pcbnew/drc/drc_test_provider_library_parity.cpp:568
#: pcbnew/drc/drc_test_provider_library_parity.cpp:573
#: pcbnew/drc/drc_test_provider_library_parity.cpp:580
#: pcbnew/drc/drc_test_provider_schematic_parity.cpp:163
#: pcbnew/drc/drc_test_provider_schematic_parity.cpp:176
#, fuzzy, c-format
msgid "'%s' settings differ."
msgstr "%s 우선 순위가 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:574
#: pcbnew/footprint.cpp:3528
#, fuzzy
msgid "Exempt From Courtyard Requirement"
msgstr "부품자리 요구 사항 면제"

#: pcbnew/drc/drc_test_provider_library_parity.cpp:598
msgid "Pad clearance overridden."
msgstr "패드 간격이 재정의됨."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:600
msgid "Solder mask expansion overridden."
msgstr "솔더 마스크 확장 재정의."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:602
msgid "Solder paste absolute clearance overridden."
msgstr "솔더 페이스트 절대 간격이 재정의됨."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:604
msgid "Solder paste relative clearance overridden."
msgstr "솔더 페이스트 상대 간격이 재정의됨."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:607
msgid "Zone connection overridden."
msgstr "영역 연결이 재정의됨."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:611
#: pcbnew/drc/drc_test_provider_library_parity.cpp:616
msgid "Net tie pad groups differ."
msgstr "네트 타이 패드 그룹이 다릅니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:693
msgid "Pad count differs."
msgstr "패드 개수가 다름."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:714
msgid "Rule area count differs."
msgstr "규칙 영역 개수가 다름."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:733
msgid "No project loaded, skipping library parity tests."
msgstr "로드된 프로젝트가 없습니다. 라이브러리 패리티 테스트를 건너뜁니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:737
msgid "Loading footprint library table..."
msgstr "풋프린트 라이브러리 테이블 로드 중..."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:747
msgid "Checking board footprints against library..."
msgstr "라이브러리에 대한 보드 풋프린트 확인 중..."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:779
#, c-format
msgid "The current configuration does not include the library '%s'."
msgstr "현재 구성에 라이브러리 '%s'이(가) 포함되어 있지 않습니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:793
#, c-format
msgid "The library '%s' is not enabled in the current configuration."
msgstr "라이브러리 '%s'이(가) 현재 구성에서 사용하도록 설정되어 있지 않습니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:829
#, c-format
msgid "Footprint '%s' not found in library '%s'."
msgstr "풋프린트 '%s'이(가) 라이브러리 '%s'에서 찾을 수 없습니다."

#: pcbnew/drc/drc_test_provider_library_parity.cpp:842
#, c-format
msgid "Footprint '%s' does not match copy in library '%s'."
msgstr "풋프린트 '%s'이(가) 라이브러리 '%s'의 복사본과 일치하지 않습니다."

#: pcbnew/drc/drc_test_provider_matched_length.cpp:114
#, c-format
msgid "(%s min length %s; actual %s)"
msgstr "(%s 최소 길이 %s; 실제 %s)"

#: pcbnew/drc/drc_test_provider_matched_length.cpp:121
#, c-format
msgid "(%s max length %s; actual %s)"
msgstr "(%s 최대 길이 %s; 실제 %s)"

#: pcbnew/drc/drc_test_provider_matched_length.cpp:158
#, c-format
msgid "(%s max skew %s; actual %s; average net length %s; actual %s)"
msgstr "(%s 최대 스큐: %s, 실제 값: %s, 평균 네트 길이: %s, 실제 값: %s)"

#: pcbnew/drc/drc_test_provider_matched_length.cpp:187
#, c-format
msgid "(%s max count %d; actual %d)"
msgstr "(%s 최대 개수 %d; 실제 값 %d)"

#: pcbnew/drc/drc_test_provider_matched_length.cpp:219
msgid "Gathering length-constrained connections..."
msgstr "길이가 제한된 연결을 모으는 중..."

#: pcbnew/drc/drc_test_provider_matched_length.cpp:339
msgid "<unconstrained>"
msgstr "<제약 없음>"

#: pcbnew/drc/drc_test_provider_matched_length.cpp:349
msgid "Checking length constraints..."
msgstr "길이 제한 확인 중..."

#: pcbnew/drc/drc_test_provider_misc.cpp:119
#, fuzzy
msgid "(Suspicious items found on Edge.Cuts layer)"
msgstr "(Edge.Cuts 레이어에서 모서리를 찾지 못했습니다)"

#: pcbnew/drc/drc_test_provider_misc.cpp:145
msgid "(no edges found on Edge.Cuts layer)"
msgstr "(Edge.Cuts 레이어에서 모서리를 찾지 못했습니다)"

#: pcbnew/drc/drc_test_provider_misc.cpp:231
#, c-format
msgid "(layer %s)"
msgstr "(레이어 %s)"

#: pcbnew/drc/drc_test_provider_misc.cpp:375
msgid "Checking board outline..."
msgstr "보드 외곽선 확인 중..."

#: pcbnew/drc/drc_test_provider_misc.cpp:383
msgid "Checking disabled layers..."
msgstr "비활성화된 레이어 확인 중..."

#: pcbnew/drc/drc_test_provider_misc.cpp:391
msgid "Checking text variables..."
msgstr "텍스트 변수 확인 중..."

#: pcbnew/drc/drc_test_provider_misc.cpp:399
msgid "Checking assertions..."
msgstr "규칙 확인..."

#: pcbnew/drc/drc_test_provider_physical_clearance.cpp:108
msgid "Gathering physical items..."
msgstr "물리적 항목 수집 중..."

#: pcbnew/drc/drc_test_provider_physical_clearance.cpp:183
msgid "Checking physical clearances..."
msgstr "물리적 여유 공간 확인 중..."

#: pcbnew/drc/drc_test_provider_physical_clearance.cpp:531
#, c-format
msgid "Internal clearance violation (%s clearance %s; actual %s)"
msgstr "내부 유격 위반 (%s 유격 %s; 실제 %s)"

#: pcbnew/drc/drc_test_provider_schematic_parity.cpp:116
#, c-format
msgid "Missing footprint %s (%s)"
msgstr "풋프린트 누락 %s (%s)"

#: pcbnew/drc/drc_test_provider_schematic_parity.cpp:132
#, fuzzy, c-format
msgid "Footprint %s value (%s) doesn't match symbol value (%s)."
msgstr "풋프린트 라이브러리의 사본과 일치하지 않음"

#: pcbnew/drc/drc_test_provider_schematic_parity.cpp:147
#, fuzzy, c-format
msgid "%s footprint (%s) doesn't match that given by symbol (%s)."
msgstr "패드 네트 (%s) 와 회로도 (%s) 에 지정된 네트가 일치하지 않습니다."

#: pcbnew/drc/drc_test_provider_schematic_parity.cpp:198
msgid "No corresponding pin found in schematic."
msgstr "회로도에서 대응하는 핀을 찾지 못했습니다."

#: pcbnew/drc/drc_test_provider_schematic_parity.cpp:208
#, c-format
msgid "Pad missing net given by schematic (%s)."
msgstr "회로도 (%s) 에서 지정된 네트의 패드를 찾지 못했습니다."

#: pcbnew/drc/drc_test_provider_schematic_parity.cpp:219
#, c-format
msgid "Pad net (%s) doesn't match net given by schematic (%s)."
msgstr "패드 네트 (%s) 와 회로도 (%s) 에 지정된 네트가 일치하지 않습니다."

#: pcbnew/drc/drc_test_provider_schematic_parity.cpp:252
#, c-format
msgid "No pad found for pin %s in schematic."
msgstr "회로도에서 핀 %s에 해당하는 패드를 찾지 못했습니다."

#: pcbnew/drc/drc_test_provider_schematic_parity.cpp:287
msgid "Checking PCB to schematic parity..."
msgstr "PCB와 회로도의 동등성 확인 중..."

#: pcbnew/drc/drc_test_provider_silk_clearance.cpp:96
msgid "Checking silkscreen for overlapping items..."
msgstr "겹쳐진 개체에 대한 실크스크린 확인 중..."

#: pcbnew/drc/drc_test_provider_sliver_checker.cpp:84
msgid "Running sliver detection on copper layers..."
msgstr "구리 층에서 조각탐지 실행 중..."

#: pcbnew/drc/drc_test_provider_solder_mask.cpp:56
msgid "board setup solder mask min width"
msgstr "보드 설정 솔더 마스크 최소 너비"

#: pcbnew/drc/drc_test_provider_solder_mask.cpp:542
#: pcbnew/drc/drc_test_provider_solder_mask.cpp:636
msgid "Front solder mask aperture bridges items with different nets"
msgstr "전면 솔더 마스크 조리개는 다른 네트를 사용하여 항목을 연결합니다"

#: pcbnew/drc/drc_test_provider_solder_mask.cpp:544
#: pcbnew/drc/drc_test_provider_solder_mask.cpp:638
msgid "Rear solder mask aperture bridges items with different nets"
msgstr "후면 솔더 마스크 조리개는 다른 네트를 가진 항목을 연결합니다"

#: pcbnew/drc/drc_test_provider_solder_mask.cpp:761
msgid "Building solder mask..."
msgstr "솔더 마스크 구축..."

#: pcbnew/drc/drc_test_provider_solder_mask.cpp:769
msgid "Checking solder mask to silk clearance..."
msgstr "실크 클리어런스에 대한 솔더 마스크를 검사..."

#: pcbnew/drc/drc_test_provider_solder_mask.cpp:774
msgid "Checking solder mask web integrity..."
msgstr "솔더 마스크 웹 무결성 확인..."

#: pcbnew/drc/drc_test_provider_text_dims.cpp:87
msgid "Checking text dimensions..."
msgstr "텍스트 크기 확인..."

#: pcbnew/drc/drc_test_provider_text_dims.cpp:107
#, c-format
msgid "(%s min height %s; actual %s)"
msgstr "(%s 최소 높이 %s; 실제 %s)"

#: pcbnew/drc/drc_test_provider_text_dims.cpp:122
#, c-format
msgid "(%s max height %s; actual %s)"
msgstr "(%s 최대 높이 %s; 실제 %s)"

#: pcbnew/drc/drc_test_provider_text_dims.cpp:217
msgid "(TrueType font characters with insufficient stroke weight)"
msgstr "(획의 두께가 부족한 TrueType 글꼴 문자)"

#: pcbnew/drc/drc_test_provider_text_dims.cpp:233
#, c-format
msgid "(%s min thickness %s; actual %s)"
msgstr "(%s 최소 두께 %s; 실제 %s)"

#: pcbnew/drc/drc_test_provider_text_dims.cpp:248
#, c-format
msgid "(%s max thickness %s; actual %s)"
msgstr "(%s 최대 두께%s; 실제 %s)"

#: pcbnew/drc/drc_test_provider_track_width.cpp:74
msgid "Checking track widths..."
msgstr "배선 폭 확인 중..."

#: pcbnew/drc/drc_test_provider_via_diameter.cpp:74
msgid "Checking via diameters..."
msgstr "비아 지름 확인 중..."

#: pcbnew/drc/drc_test_provider_via_diameter.cpp:118
#, c-format
msgid "(%s min diameter %s; actual %s)"
msgstr "(%s 최소 직경 %s; 실제 값 %s)"

#: pcbnew/drc/drc_test_provider_via_diameter.cpp:125
#, c-format
msgid "(%s max diameter %s; actual %s)"
msgstr "(%s 최대 직경 %s; 실제 값 %s)"

#: pcbnew/drc/drc_test_provider_zone_connections.cpp:222
#, c-format
msgid "(layer %s; %d spokes connected to isolated island)"
msgstr "(레이어 %s, 고립된 섬에 연결된 %d 스포크)"

#: pcbnew/drc/drc_test_provider_zone_connections.cpp:229
#, c-format
msgid "(layer %s; %s min spoke count %d; actual %d)"
msgstr "(레이어 %s; %s 최소 스포크 수 %d; 실제 %d)"

#: pcbnew/drc/drc_test_provider_zone_connections.cpp:254
msgid "Checking thermal reliefs..."
msgstr "단열판 확인..."

#: pcbnew/edit_zone_helpers.cpp:85
msgid "Modify zone properties"
msgstr "영역 속성 수정"

#: pcbnew/exporters/export_d356.cpp:380
msgid "Export D-356 Test File"
msgstr "D-356 테스트 파일 내보내기"

#: pcbnew/exporters/export_footprint_associations.cpp:73
msgid "Save Footprint Association File"
msgstr "풋프린트 연결 파일 저장"

#: pcbnew/exporters/export_hyperlynx.cpp:169
msgid ""
"File contains pad shapes that are not supported by the Hyperlynx exporter "
"(supported shapes are oval, rectangle, rounded rectangle, and circle)."
msgstr ""
"파일에 Hyperlynx 내보내기 도구에서 지원하지 않는 패드 도형이 포함되어 있습니"
"다 (지원되는 도형은 타원, 직사각형과 원 입니다)."

#: pcbnew/exporters/export_hyperlynx.cpp:173
msgid "They have been exported as oval pads."
msgstr "이들은 타원 패드로 출력되었습니다."

#: pcbnew/exporters/export_hyperlynx.cpp:288
#: pcbnew/exporters/exporter_vrml.cpp:781
#: pcbnew/exporters/step/exporter_step.cpp:382
#: pcbnew/specctra_import_export/specctra_export.cpp:119
msgid "Board outline is malformed. Run DRC for a full analysis."
msgstr "기판의 외곽선이 잘못되었습니다. DRC를 실행하여 전체 분석을 진행하세요."

#: pcbnew/exporters/export_idf.cpp:653 pcbnew/exporters/export_idf.cpp:662
#: pcbnew/exporters/export_idf.cpp:670
msgid "IDF Export Failed:\n"
msgstr "IDF 내보내기 실패:\n"

#: pcbnew/exporters/exporter_vrml.cpp:810
msgid "VRML Export Failed: Could not add holes to contours."
msgstr "VRML 내보내기 실패: 윤곽에 홀을 추가할 수 없습니다."

#: pcbnew/exporters/exporter_vrml.cpp:1241
msgid "No project when exporting the VRML file"
msgstr "VRML 파일을 내보낼 때 프로젝트 없음"

#: pcbnew/exporters/exporter_vrml.cpp:1305
msgid "VRML Export Failed:\n"
msgstr "VRML 내보내기 실패:\n"

#: pcbnew/exporters/gendrill_Excellon_writer.cpp:129
#, c-format
msgid "Created file '%s'"
msgstr "생성된 파일 '%s'"

#: pcbnew/exporters/gendrill_file_writer_base.cpp:350
#: pcbnew/exporters/gendrill_gerber_writer.cpp:116
#, c-format
msgid "Created file '%s'."
msgstr "'%s' 파일 생성됨."

#: pcbnew/exporters/gerber_jobfile_writer.cpp:159
#, c-format
msgid "Created Gerber job file '%s'."
msgstr "거버 작업 파일 '%s'을(를) 생성하였습니다."

#: pcbnew/exporters/gerber_jobfile_writer.cpp:592
msgid "Board stackup settings not up to date."
msgstr "기판 시작 설정이 최신이 아닙니다."

#: pcbnew/exporters/step/exporter_step.cpp:502
msgid "Determining PCB data\n"
msgstr "PCB 데이터 결정\n"

#: pcbnew/exporters/step/exporter_step.cpp:505
#, c-format
msgid "Board Thickness from stackup: %.3f mm\n"
msgstr "스택업에서 기판 두께: %.3f mm\n"

#: pcbnew/exporters/step/exporter_step.cpp:519
#, c-format
msgid "Build %s data\n"
msgstr "%s 데이터 구축\n"

#: pcbnew/exporters/step/exporter_step.cpp:523
msgid ""
"\n"
"** Error building STEP board model. Export aborted. **\n"
msgstr ""
"\n"
"** STEP 보드 모델을 빌드하는 동안 오류가 발생했습니다. 내보내기가 중단되었습"
"니다. **\n"

#: pcbnew/exporters/step/exporter_step.cpp:527
#, c-format
msgid "Writing %s file\n"
msgstr "%s 파일 쓰기\n"

#: pcbnew/exporters/step/exporter_step.cpp:537
#, c-format
msgid ""
"\n"
"** Error writing %s file. **\n"
msgstr ""
"\n"
"** %s 파일을 쓰는 중 오류 발생. **\n"

#: pcbnew/exporters/step/exporter_step.cpp:543
#, c-format
msgid "%s file '%s' created.\n"
msgstr "%s 파일 '%s' 생성됨.\n"

#: pcbnew/exporters/step/exporter_step.cpp:550
#: pcbnew/exporters/step/exporter_step.cpp:556
#, c-format
msgid ""
"\n"
"** Error exporting %s file. Export aborted. **\n"
msgstr ""
"\n"
"** %s 파일을 내보내는 중 오류 발생. 내보내기가 중단됨 **\n"

#: pcbnew/exporters/step/exporter_step.cpp:565
#, c-format
msgid ""
"Unable to create %s file.\n"
"Check that the board has a valid outline and models."
msgstr ""
"%s 파일을 생성할 수 없습니다.\n"
"보드에 유효한 아웃라인과 모델이 있는지 확인하십시오."

#: pcbnew/exporters/step/exporter_step.cpp:571
#, c-format
msgid "%s file has been created, but there are warnings."
msgstr "%s 파일이 생성되었지만 경고가 있습니다."

#: pcbnew/exporters/step/exporter_step.cpp:580
#, c-format
msgid ""
"\n"
"Export time %.3f s\n"
msgstr ""
"\n"
"내보내기 시간 %.3f s\n"

#: pcbnew/exporters/step/step_pcb_model.cpp:954
#, c-format
msgid "Build holes for %s\n"
msgstr "%s에 구멍 만들기\n"

#: pcbnew/exporters/step/step_pcb_model.cpp:959
#, c-format
msgid "Cutting %d/%d %s\n"
msgstr "절단 %d/%d %s\n"

#: pcbnew/exporters/step/step_pcb_model.cpp:986
#, fuzzy
msgid "shapes"
msgstr "+ 모양"

#: pcbnew/exporters/step/step_pcb_model.cpp:994
#, fuzzy
msgid "pads"
msgstr "패드 없음"

#: pcbnew/exporters/step/step_pcb_model.cpp:995
#, fuzzy
msgid "tracks"
msgstr "배선"

#: pcbnew/exporters/step/step_pcb_model.cpp:996
#, fuzzy
msgid "zones"
msgstr "구역"

#: pcbnew/files.cpp:146
msgid "All KiCad Board Files"
msgstr "모든 KiCad 기판 파일"

#: pcbnew/files.cpp:173
msgid "Open Board File"
msgstr "기판 파일 열기"

#: pcbnew/files.cpp:174
msgid "Import Non KiCad Board File"
msgstr "비 KiCad 기판 파일 가져오기"

#: pcbnew/files.cpp:206
msgid "Save Board File As"
msgstr "다른 이름으로 기판 파일 저장"

#: pcbnew/files.cpp:232
msgid "Printed circuit board"
msgstr "인쇄 회로 기판"

#: pcbnew/files.cpp:299
#, c-format
msgid "Recovery file '%s' not found."
msgstr "복구 파일 '%s'을(를) 찾을 수 없습니다."

#: pcbnew/files.cpp:304
#, c-format
msgid "OK to load recovery file '%s'?"
msgstr "복구 파일 '%s'을(를) 불러오시겠습니까?"

#: pcbnew/files.cpp:347
#, c-format
msgid "Current board will be closed, save changes to '%s' before continuing?"
msgstr ""
"현재 기판은 닫힐 것입니다. 계속하기 전에 '%s'에 변경 사항을 저장할까요?"

#: pcbnew/files.cpp:361
msgid "Current Board will be closed. Continue?"
msgstr "현재 기판이 닫힙니다. 계속하시겠습니까?"

#: pcbnew/files.cpp:478
msgid ""
"If the zones on this board are refilled the Copper Edge Clearance setting "
"will be used (see Board Setup > Design Rules > Constraints).\n"
"This may result in different fills from previous KiCad versions which used "
"the line thicknesses of the board boundary on the Edge Cuts layer."
msgstr ""
"기판의 영역이 다시 채워질 때, 구리 모서리 클리어런스가 사용됩니다 (기판 설정 "
"> 디자인 규칙 > 제약 을 참조하세요).\n"
"이는 Edge Cuts 레이어에 기판 테두리 선 굵기를 사용하던 이전 KiCad 버전과는 다"
"른 채움 결과를 내보낼 것입니다."

#: pcbnew/files.cpp:524
#, c-format
msgid "PCB '%s' is already open by '%s' at '%s'."
msgstr "PCB '%s'은(는) '%s'에 의해 '%s'에서 이미 열려 있습니다."

#: pcbnew/files.cpp:535
msgid "The current PCB has been modified.  Save changes?"
msgstr "현재 PCB는 수정되었습니다.  변경사항을 저장할까요?"

#: pcbnew/files.cpp:554
#, c-format
msgid "PCB '%s' does not exist. Do you wish to create it?"
msgstr "PCB '%s'은(는) 존재하지 않습니다. 생성할까요?"

#: pcbnew/files.cpp:563
msgid "Creating PCB"
msgstr "PCB 생성"

#: pcbnew/files.cpp:654
#, fuzzy
msgid "File format is not supported"
msgstr "(여러 보드 외곽선은 지원되지 않음)"

#: pcbnew/files.cpp:694 pcbnew/files.cpp:704
#, c-format
msgid "Error loading PCB '%s'."
msgstr "PCB '%s'을(를) 불러오는 중에 오류가 발생했습니다."

#: pcbnew/files.cpp:713
#, c-format
msgid "Memory exhausted loading PCB '%s'"
msgstr "PCB '%s' 불러오는 중 메모리 부족이 발생하였습니다"

#: pcbnew/files.cpp:826
#, c-format
msgid "Error saving footprint %s to project specific library."
msgstr ""
"프로젝트의 특정 라이브러리에 풋프린트 %s을(를) 저장하는 동안 오류가 발생했습"
"니다."

#: pcbnew/files.cpp:857
msgid "Error saving project specific footprint library table."
msgstr ""
"프로젝트 특정 풋프린트 라이브러리 테이블을 저장하는 도중 오류가 발생했습니다."

#: pcbnew/files.cpp:949 pcbnew/files.cpp:1088 pcbnew/files.cpp:1256
#: pcbnew/footprint_libraries_utils.cpp:268
#, c-format
msgid "Insufficient permissions to write file '%s'."
msgstr "'%s' 파일 저장에 필요한 권한이 충분하지 않습니다."

#: pcbnew/files.cpp:981 pcbnew/files.cpp:1133
#, c-format
msgid "Error saving custom rules file '%s'."
msgstr "사용자 정의 규칙 파일 '%s'을(를) 저장하는 동안 오류가 발생했습니다."

#: pcbnew/files.cpp:1007 pcbnew/files.cpp:1109
#, c-format
msgid ""
"Error saving board file '%s'.\n"
"%s"
msgstr ""
"보드 파일 '%s'을(를) 저장하는 중 오류 발생.\n"
"%s"

#: pcbnew/files.cpp:1027
#, c-format
msgid ""
"Error saving board file '%s'.\n"
"Failed to rename temporary file '%s."
msgstr ""
"보드 파일 '%s'을(를) 저장하는 중 오류 발생.\n"
"임시 파일 '%s'의 이름을 바꾸지 못함."

#: pcbnew/files.cpp:1137
#, c-format
msgid ""
"Board copied to:\n"
"%s"
msgstr ""
"기판이 복사됨:\n"
"%s"

#: pcbnew/files.cpp:1250
msgid "The board must be saved before generating IPC2581 file."
msgstr "IPC2581 파일을 생성하기 전에 보드를 저장해야 합니다."

#: pcbnew/files.cpp:1266
#, fuzzy
msgid "Generating IPC2581 file"
msgstr "IPC-D-356 네트리스트 파일 생성"

#: pcbnew/files.cpp:1289 pcbnew/pcbnew_jobs_handler.cpp:1168
#, fuzzy, c-format
msgid ""
"Error generating IPC2581 file '%s'.\n"
"%s"
msgstr ""
"보드 파일 '%s'을(를) 저장하는 중 오류 발생.\n"
"%s"

#: pcbnew/files.cpp:1353 pcbnew/pcbnew_jobs_handler.cpp:1200
#, fuzzy, c-format
msgid ""
"Error generating IPC2581 file '%s'.\n"
"Failed to rename temporary file '%s."
msgstr ""
"보드 파일 '%s'을(를) 저장하는 중 오류 발생.\n"
"임시 파일 '%s'의 이름을 바꾸지 못함."

#: pcbnew/footprint.cpp:952 pcbnew/footprint_libraries_utils.cpp:1205
msgid "Other"
msgstr "기타"

#: pcbnew/footprint.cpp:1281
msgid "Footprint Name"
msgstr "풋프린트 이름"

#: pcbnew/footprint.cpp:1285 pcbnew/footprint.cpp:1339
#, c-format
msgid "Doc: %s"
msgstr "문서: %s"

#: pcbnew/footprint.cpp:1286 pcbnew/footprint.cpp:1340
#, c-format
msgid "Keywords: %s"
msgstr "키워드: %s"

#: pcbnew/footprint.cpp:1295 pcbnew/footprint.cpp:1296
msgid "Board Side"
msgstr "보드 측면"

#: pcbnew/footprint.cpp:1296
msgid "Back (Flipped)"
msgstr "후면 (뒤집힘)"

#: pcbnew/footprint.cpp:1315
msgid "autoplaced"
msgstr "자동 배치"

#: pcbnew/footprint.cpp:1318
msgid "not in schematic"
msgstr "회로도에 없음"

#: pcbnew/footprint.cpp:1321
msgid "exclude from pos files"
msgstr "pos 파일에서 제외"

#: pcbnew/footprint.cpp:1324
msgid "exclude from BOM"
msgstr "BOM에서 제외"

#: pcbnew/footprint.cpp:1329
msgid "Status: "
msgstr "상태: "

#: pcbnew/footprint.cpp:1329
msgid "Attributes:"
msgstr "속성:"

#: pcbnew/footprint.cpp:1335
#, c-format
msgid "3D-Shape: %s"
msgstr "3D 형태: %s"

#: pcbnew/footprint.cpp:1335
msgid "<none>"
msgstr "<없음>"

#: pcbnew/footprint.cpp:1726
msgid "<no reference designator>"
msgstr "<참조 지정자 없음>"

#: pcbnew/footprint.cpp:1728
#, c-format
msgid "Footprint %s"
msgstr "풋프린트 %s"

#: pcbnew/footprint.cpp:2749
#, c-format
msgid "(expected 'Through hole'; actual '%s')"
msgstr "(예상 '스루 홀'; 실제 '%s')"

#: pcbnew/footprint.cpp:2752
#, c-format
msgid "(expected 'SMD'; actual '%s')"
msgstr "(기대값 'SMD'; 실제 '%s')"

#: pcbnew/footprint.cpp:2780
msgid "(PTH pad has no copper layers)"
msgstr "(PTH 패드에는 구리레이어가 없습니다)"

#: pcbnew/footprint.cpp:2799
msgid "(PTH pad's hole leaves no copper)"
msgstr "(PTH 패드의 홀은 구리를 남기지 않습니다)"

#: pcbnew/footprint.cpp:2808
msgid "(SMD pad appears on both front and back copper)"
msgstr "(SMD 패드는 전면 및 후면 쿠퍼 모두에게 나타납니다)"

#: pcbnew/footprint.cpp:2815 pcbnew/footprint.cpp:2828
msgid "(SMD pad copper and mask layers don't match)"
msgstr "(SMD 패드 쿠퍼와 마스크 레이어가 일치하지 않음)"

#: pcbnew/footprint.cpp:2820 pcbnew/footprint.cpp:2833
msgid "(SMD pad copper and paste layers don't match)"
msgstr "(SMD 패드 쿠퍼와 페이스트 레이어가 일치하지 않음)"

#: pcbnew/footprint.cpp:3013
#, c-format
msgid "(net-tie pad group contains unknown pad number %s)"
msgstr "(네트 타이 패드 그룹에 알 수 없는 패드 번호 %s가 포함됨)"

#: pcbnew/footprint.cpp:3018
#, c-format
msgid "(pad %s appears in more than one net-tie pad group)"
msgstr "(패드 %s는 하나 이상의 네트 타이 패드 그룹에 나타남)"

#: pcbnew/footprint.cpp:3455 pcbnew/pad.cpp:1906 pcbnew/zone.cpp:1548
msgid "Inherited"
msgstr "상속"

#: pcbnew/footprint.cpp:3459 pcbnew/pad.cpp:1910 pcbnew/zone.cpp:1552
msgid "Thermal reliefs for PTH"
msgstr "PTH용 단열판"

#: pcbnew/footprint.cpp:3513
#, fuzzy
msgid "Not in Schematic"
msgstr "회로도에 없음"

#: pcbnew/footprint.cpp:3515
#, fuzzy
msgid "Exclude From Position Files"
msgstr "부품 배치 파일에서 제외"

#: pcbnew/footprint.cpp:3525 pcbnew/pad.cpp:2020
msgid "Overrides"
msgstr "재설정"

#: pcbnew/footprint.cpp:3531 pcbnew/pad.cpp:2022
msgid "Clearance Override"
msgstr "클리어런스 재정의"

#: pcbnew/footprint.cpp:3535 pcbnew/pad.cpp:2030
msgid "Solderpaste Margin Override"
msgstr "솔더 페이스트 간격 재정의"

#: pcbnew/footprint.cpp:3540 pcbnew/pad.cpp:2034
msgid "Solderpaste Margin Ratio Override"
msgstr "솔더 페이스트 간격 비율 재정의"

#: pcbnew/footprint.cpp:3545 pcbnew/pad.cpp:2039
msgid "Zone Connection Style"
msgstr "영역 연결 스타일"

#: pcbnew/footprint.h:263
#, c-format
msgid "footprint %s"
msgstr "풋프린트 %s"

#: pcbnew/footprint_chooser_frame.cpp:73
#, fuzzy
msgid "Footprint Chooser"
msgstr "풋프린트 검사기"

#: pcbnew/footprint_chooser_frame.cpp:83
#, fuzzy
msgid "Apply footprint filters"
msgstr "풋프린트 필터 추가"

#: pcbnew/footprint_edit_frame.cpp:115
msgid "KiCad Footprint Editor"
msgstr "KiCad 풋프린트 편집기"

#: pcbnew/footprint_edit_frame.cpp:204 pcbnew/zone_settings.cpp:275
msgid "Inner layers"
msgstr "내부 레이어"

#: pcbnew/footprint_edit_frame.cpp:245 pcbnew/footprint_edit_frame.cpp:910
#: pcbnew/pcb_edit_frame.cpp:307 pcbnew/pcb_edit_frame.cpp:1578
msgid "Selection Filter"
msgstr "선택 필터"

#: pcbnew/footprint_edit_frame.cpp:291
msgid "Footprint changes are unsaved"
msgstr "풋프린트 변경사항이 저장되지 않았습니다"

#: pcbnew/footprint_edit_frame.cpp:543
#, c-format
msgid "Editing %s from board.  Saving will update the board only."
msgstr "%s을(를) 기판에서 수정 중입니다.  저장하면 기판만을 업데이트합니다."

#: pcbnew/footprint_edit_frame.cpp:952
#, c-format
msgid "[from %s]"
msgstr "[%s에서]"

#: pcbnew/footprint_edit_frame.cpp:987
msgid "[no footprint loaded]"
msgstr "[불러온 풋프린트가 없음]"

#: pcbnew/footprint_edit_frame.cpp:1043
msgid "Updating Footprint Libraries"
msgstr "풋프린트 라이브러리 업데이트 중"

#: pcbnew/footprint_edit_frame.cpp:1366
msgid "No footprint selected."
msgstr "선택된 풋프린트가 없음."

#: pcbnew/footprint_editor_utils.cpp:247
msgid "Edit Zone"
msgstr "영역 편집"

#: pcbnew/footprint_editor_utils.cpp:326
#, c-format
msgid ""
"The current configuration does not include a library named '%s'.\n"
"Use Manage Footprint Libraries to edit the configuration."
msgstr ""
"현재 설정은 '%s' 라이브러리를 포함하지 않습니다.\n"
"풋프린트 라이브러리 관리를 사용하여 설정을 편집하세요."

#: pcbnew/footprint_editor_utils.cpp:329
msgid "Library not found in footprint library table."
msgstr "풋프린트 라이브러리 테이블에서 라이브러리를 찾을 수 없습니다."

#: pcbnew/footprint_editor_utils.cpp:338
#, c-format
msgid ""
"The library '%s' is not enabled in the current configuration.\n"
"Use Manage Footprint Libraries to edit the configuration."
msgstr ""
"라이브러리 '%s'은(는) 현재 설정에서 활성화되어 있지 않습니다.\n"
"풋프린트 라이브러리 관리를 사용하여 설정을 편집합니다."

#: pcbnew/footprint_editor_utils.cpp:341
msgid "Footprint library not enabled."
msgstr "풋프린트 라이브러리가 활성화되지 않았습니다."

#: pcbnew/footprint_info_impl.cpp:124
msgid "Fetching footprint libraries..."
msgstr "풋프린트 라이브러리 가져오기..."

#: pcbnew/footprint_info_impl.cpp:155
msgid "Loading footprints..."
msgstr "풋프린트 로딩…"

#: pcbnew/footprint_libraries_utils.cpp:63
msgid ""
"Writing/modifying legacy libraries (.mod files) is not allowed\n"
"Please save the current library to the new .pretty format\n"
"and update your footprint lib table\n"
"to save your footprint (a .kicad_mod file) in the .pretty library folder"
msgstr ""
"오래된 라이브러리 (.mod 파일) 를 쓰거나 편집하는 것은 허용되지 않습니다\n"
"현재 라이브러리를 새로운 .pretty 형식으로 저장하고\n"
"풋프린트 라이브러리 테이블을 업데이트하여\n"
"풋프린트 (.kicad_mod 파일) 를 .pretty 라이브러리 폴더에 저장할 수 있도록 하세"
"요"

#: pcbnew/footprint_libraries_utils.cpp:69
msgid ""
"Modifying legacy libraries (.mod files) is not allowed\n"
"Please save the current library under the new .pretty format\n"
"and update your footprint lib table\n"
"before deleting a footprint"
msgstr ""
"오래된 라이브러리 (.mod 파일) 를 편집하는 것은 허용되지 않습니다\n"
"현재 라이브러리를 새로운 .pretty 형식으로 저장하고\n"
"풋프린트를 삭제하기 전에\n"
"풋프린트 라이브러리 테이블을 업데이트하세요"

#: pcbnew/footprint_libraries_utils.cpp:122
msgid "Import Footprint"
msgstr "풋프린트 불러오기"

#: pcbnew/footprint_libraries_utils.cpp:168
msgid "Not a footprint file."
msgstr "풋프린트 파일이 아닙니다."

#: pcbnew/footprint_libraries_utils.cpp:183
#, c-format
msgid "Unable to load footprint '%s' from '%s'"
msgstr "풋프린트 '%s'을(를) '%s'에서 불러올 수 없습니다"

#: pcbnew/footprint_libraries_utils.cpp:239
msgid "Export Footprint"
msgstr "풋프린트 내보내기"

#: pcbnew/footprint_libraries_utils.cpp:282
#, c-format
msgid "Footprint exported to file '%s'."
msgstr "풋프린트를 '%s' 파일로 내보냈습니다."

#: pcbnew/footprint_libraries_utils.cpp:368
#, c-format
msgid "Library %s is read only."
msgstr "%s 라이브러리는 읽기 전용입니다."

#: pcbnew/footprint_libraries_utils.cpp:374
#, c-format
msgid "Library %s already exists."
msgstr "라이브러리 %s이(가) 이미 존재합니다."

#: pcbnew/footprint_libraries_utils.cpp:543
#: pcbnew/pcb_io/geda/pcb_io_geda.cpp:960
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:2661
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:2738
#, c-format
msgid "Library '%s' is read only."
msgstr "%s 라이브러리는 읽기 전용입니다."

#: pcbnew/footprint_libraries_utils.cpp:549
#, c-format
msgid "Delete footprint '%s' from library '%s'?"
msgstr "풋프린트 '%s'을(를) '%s' 라이브러리에서 삭제하겠습니까?"

#: pcbnew/footprint_libraries_utils.cpp:566
#, c-format
msgid "Footprint '%s' deleted from library '%s'"
msgstr "풋프린트 '%s'이(가) 라이브러리 '%s'에서 삭제되었습니다"

#: pcbnew/footprint_libraries_utils.cpp:581
msgid "No footprints to export!"
msgstr "내보낼 풋프린트가 없음!"

#: pcbnew/footprint_libraries_utils.cpp:610
#, c-format
msgid "Update footprints on board to refer to %s?"
msgstr "기판상의 풋프린트를 %s를 참조하여 업데이트하시겠습니까?"

#: pcbnew/footprint_libraries_utils.cpp:660
msgid "Update footprints on board to refer to new library?"
msgstr "기판상의 풋프린트를 새 라이브러리를 참조하여 업데이트하시겠습니까?"

#: pcbnew/footprint_libraries_utils.cpp:854
#: pcbnew/footprint_viewer_frame.cpp:744
msgid "No board currently open."
msgstr "현재 열린 기판이 없습니다."

#: pcbnew/footprint_libraries_utils.cpp:880
msgid ""
"Unable to find the footprint on the main board.\n"
"Cannot save."
msgstr ""
"메인 기판에서 풋프린트를 찾을 수 없습니다.\n"
"저장할 수 없습니다."

#: pcbnew/footprint_libraries_utils.cpp:888
#: pcbnew/footprint_viewer_frame.cpp:752
msgid "Previous footprint placement still in progress."
msgstr "이전의 풋프린트 배치가 진행 중입니다."

#: pcbnew/footprint_libraries_utils.cpp:942
#, fuzzy
msgid "Insert Footprint"
msgstr "풋프린트 불러오기"

#: pcbnew/footprint_libraries_utils.cpp:963
msgid "Save Footprint As"
msgstr "풋프린트를 다른 이름으로 저장"

#: pcbnew/footprint_libraries_utils.cpp:1112
#, c-format
msgid "Footprint %s already exists in %s."
msgstr "풋프린트 %s은(는) 이미 %s에 존재합니다."

#: pcbnew/footprint_libraries_utils.cpp:1156
#, c-format
msgid "Footprint '%s' replaced in '%s'"
msgstr "풋프린트 '%s'이(가) '%s'에서 교체되었습니다"

#: pcbnew/footprint_libraries_utils.cpp:1157
#, c-format
msgid "Footprint '%s' added to '%s'"
msgstr "풋프린트 '%s'이(가) '%s'에 추가되었습니다"

#: pcbnew/footprint_libraries_utils.cpp:1203
msgid "Enter footprint name:"
msgstr "풋프린트 이름:"

#: pcbnew/footprint_libraries_utils.cpp:1203
msgid "New Footprint"
msgstr "새 풋프린트"

#: pcbnew/footprint_libraries_utils.cpp:1253
#: pcbnew/tools/footprint_editor_control.cpp:447
#, fuzzy, c-format
msgid "Footprint '%s' already exists in library '%s'."
msgstr "풋프린트 이름 '%s'가 이미 라이브러리 '%s'에서 사용됨."

#: pcbnew/footprint_viewer_frame.cpp:116
#, fuzzy
msgid "KiCad Footprint Library Browser"
msgstr "풋프린트 라이브러리 브라우저"

#: pcbnew/footprint_viewer_frame.cpp:158
msgid ""
"Filter on footprint name, keywords, description and pad count.\n"
"Search terms are separated by spaces.  All search terms must match.\n"
"A term which is a number will also match against the pad count."
msgstr ""
"풋프린트 이름, 키워드, 설명과 패드 개수로 필터링할 수 있습니다.\n"
"검색어는 공백으로 구분됩니다.  모든 검색어가 일치하여야 합니다.\n"
"숫자 검색어는 패드 개수에 대해서도 일치합니다."

#: pcbnew/footprint_wizard_frame.cpp:83
#: pcbnew/footprint_wizard_frame_functions.cpp:81
msgid "Footprint Wizard"
msgstr "풋프린트 마법사"

#: pcbnew/footprint_wizard_frame.cpp:567
#, c-format
msgid "ModView: 3D Viewer [%s]"
msgstr "ModView: 3D 뷰어 [%s]"

#: pcbnew/footprint_wizard_frame.cpp:588
msgid "Select wizard script to run"
msgstr "실행할 마법사 스크립트를 선택"

#: pcbnew/footprint_wizard_frame.cpp:593
msgid "Reset wizard parameters to default"
msgstr "마법사 매개변수를 기본값으로 초기화"

#: pcbnew/footprint_wizard_frame.cpp:598
msgid "Select previous parameters page"
msgstr "이전의 매개변수 페이지를 선택"

#: pcbnew/footprint_wizard_frame.cpp:601
msgid "Select next parameters page"
msgstr "다음의 매개변수 페이지를 선택"

#: pcbnew/footprint_wizard_frame.cpp:618
msgid "Export footprint to editor"
msgstr "풋프린트를 편집기로 내보내기"

#: pcbnew/footprint_wizard_frame_functions.cpp:87
msgid "no wizard selected"
msgstr "선택한 마법사 없음"

#: pcbnew/footprint_wizard_frame_functions.cpp:139
msgid "Couldn't reload footprint wizard"
msgstr "풋프린트 마법사를 다시 불러올 수 없습니다"

#: pcbnew/generate_footprint_info.cpp:43
msgid "Documentation"
msgstr "문서"

#: pcbnew/generate_footprint_info.cpp:81
#, c-format
msgid "Error loading footprint %s from library '%s'."
msgstr ""
"풋프린트 %s을(를) '%s' 라이브러리에서 불러오는 중에 오류가 발생하였습니다."

#: pcbnew/generators/pcb_tuning_pattern.cpp:254
#: pcbnew/generators/pcb_tuning_pattern.cpp:259
#: pcbnew/generators/pcb_tuning_pattern.cpp:2031
#, fuzzy
msgid "Tuning Pattern"
msgstr "패턴"

#: pcbnew/generators/pcb_tuning_pattern.cpp:264
#, fuzzy
msgid "Tuning Patterns"
msgstr "패턴"

#: pcbnew/generators/pcb_tuning_pattern.cpp:446
#, fuzzy
msgid "Tuning"
msgstr "경고"

#: pcbnew/generators/pcb_tuning_pattern.cpp:1328
msgid "too long"
msgstr "매우 김"

#: pcbnew/generators/pcb_tuning_pattern.cpp:1329
msgid "too short"
msgstr "매우 짧음"

#: pcbnew/generators/pcb_tuning_pattern.cpp:1330
msgid "tuned"
msgstr "조정됨"

#: pcbnew/generators/pcb_tuning_pattern.cpp:1404
#, fuzzy
msgid "Edit Tuning Pattern"
msgstr "텍스트 편집기에서 편집"

#: pcbnew/generators/pcb_tuning_pattern.cpp:1877
msgid "current skew"
msgstr "현재 왜곡도"

#: pcbnew/generators/pcb_tuning_pattern.cpp:1879
msgid "current length"
msgstr "현재 길이"

#: pcbnew/generators/pcb_tuning_pattern.cpp:1965
#, fuzzy
msgid "Routed Lengths"
msgstr "배선 길이"

#: pcbnew/generators/pcb_tuning_pattern.cpp:1971 pcbnew/pcb_track.cpp:1093
msgid "Routed Length"
msgstr "배선 길이"

#: pcbnew/generators/pcb_tuning_pattern.cpp:1977 pcbnew/pad.cpp:2014
#: pcbnew/pcb_track.cpp:1098
msgid "Pad To Die Length"
msgstr "패드에서 다이까지의 길이"

#: pcbnew/generators/pcb_tuning_pattern.cpp:1980 pcbnew/pcb_track.cpp:1101
msgid "Full Length"
msgstr "총 길이"

#: pcbnew/generators/pcb_tuning_pattern.cpp:1992
#, c-format
msgid "Target Skew: %s"
msgstr "대상 편향: %s"

#: pcbnew/generators/pcb_tuning_pattern.cpp:1993
#: pcbnew/generators/pcb_tuning_pattern.cpp:2015
#, fuzzy
msgid "(from tuning pattern properties)"
msgstr "치수 속성"

#: pcbnew/generators/pcb_tuning_pattern.cpp:2001
#, fuzzy, c-format
msgid "Skew Constraints: %s"
msgstr "너비 제한: 최소 %s"

#: pcbnew/generators/pcb_tuning_pattern.cpp:2014
#, c-format
msgid "Target Length: %s"
msgstr "대상 길이: %s"

#: pcbnew/generators/pcb_tuning_pattern.cpp:2023
#, fuzzy, c-format
msgid "Length Constraints: %s"
msgstr "너비 제한: 최소 %s"

#: pcbnew/generators/pcb_tuning_pattern.cpp:2222
#, fuzzy
msgid "Tune"
msgstr "조정 %s"

#: pcbnew/generators/pcb_tuning_pattern.cpp:2319
#, fuzzy
msgid "Single track"
msgstr "단일 페이지"

#: pcbnew/generators/pcb_tuning_pattern.cpp:2320
msgid "Differential pair"
msgstr "차동 쌍"

#: pcbnew/generators/pcb_tuning_pattern.cpp:2321
#, fuzzy
msgid "Diff pair skew"
msgstr "차동 쌍"

#: pcbnew/generators/pcb_tuning_pattern.cpp:2335
#, fuzzy
msgid "Pattern Properties"
msgstr "핀 속성"

#: pcbnew/generators/pcb_tuning_pattern.cpp:2350
#, fuzzy
msgid "Tuning Mode"
msgstr "라인 모델"

#: pcbnew/generators/pcb_tuning_pattern.cpp:2356
msgid "Min Amplitude"
msgstr "최소 진폭"

#: pcbnew/generators/pcb_tuning_pattern.cpp:2363
msgid "Max Amplitude"
msgstr "최대 진폭"

#: pcbnew/generators/pcb_tuning_pattern.cpp:2370
msgid "Initial Side"
msgstr "초기 상태"

#: pcbnew/generators/pcb_tuning_pattern.cpp:2376
msgid "Min Spacing"
msgstr "최소 간격"

#: pcbnew/generators/pcb_tuning_pattern.cpp:2382
msgid "Corner Radius %"
msgstr "모서리 반경 %"

#: pcbnew/generators/pcb_tuning_pattern.cpp:2404
msgid "Target Length"
msgstr "타겟 길이"

#: pcbnew/generators/pcb_tuning_pattern.cpp:2413
msgid "Target Skew"
msgstr "대상 기울기"

#: pcbnew/generators/pcb_tuning_pattern.cpp:2421
msgid "Override Custom Rules"
msgstr "맞춤 규칙 무시"

#: pcbnew/generators/pcb_tuning_pattern.cpp:2433
#, fuzzy
msgid "Rounded"
msgstr "둥근"

#: pcbnew/import_gfx/dialog_import_graphics.cpp:230
#, fuzzy
msgid "Please select a file to import."
msgstr "유효한 레이어를 선택하세요."

#: pcbnew/import_gfx/dialog_import_graphics.cpp:236
msgid "Please select a valid layer."
msgstr "유효한 레이어를 선택하세요."

#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:59
#, fuzzy
msgid "DXF default line width:"
msgstr "기본 선 너비:"

#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:61
msgid "Used when the DXF items in file have no line thickness set"
msgstr "파일에 선 굵기가 설정되지 않은 DXF 항목이 있을 때 사용됨"

#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:72
#, fuzzy
msgid "DXF default units:"
msgstr "기본 단위:"

#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:74
msgid "Used when the DXF file has no unit set"
msgstr "DXF 파일에 단위가 설정되지 않은 경우 사용"

#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:97
msgid "Place at:"
msgstr "위치:"

#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:98
msgid "If not checked: use interactive placement."
msgstr "선택하지 않은 경우: 대화형 배치를 사용함."

#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:142
msgid ""
"If checked, use the selected layer in this dialog\n"
"If unchecked, use the Board Editor active layer"
msgstr ""
"선택하면 이 대화 상자에서 선택한 레이어를 사용\n"
"체크하지 않으면 보드 편집기 활성 레이어를 사용"

#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:158
#, fuzzy
msgid "Group imported items"
msgstr "개체 그룹화"

#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:160
#, fuzzy
msgid "Add all imported items to a new group"
msgstr "모든 불러온 개체를 새로운 그룹에 추가"

#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:173
msgid "Fix discontinuities"
msgstr "불연속 수정"

#: pcbnew/import_gfx/dialog_import_graphics_base.cpp:174
msgid ""
"Trim/extend open shapes or add segments to make vertices of shapes coincide"
msgstr ""
"열린 도형을 트리밍/확장하거나 도형의 꼭짓점이 일치하도록 세그먼트를 추가함"

#: pcbnew/initpcb.cpp:47
msgid ""
"Current Board will be lost and this operation cannot be undone. Continue?"
msgstr ""
"현재 기판의 정보가 사라집니다. 이 작업은 되돌릴 수 없습니다. 계속하시겠습니"
"까?"

#: pcbnew/initpcb.cpp:115 pcbnew/tools/footprint_editor_control.cpp:200
msgid "The current footprint has been modified.  Save changes?"
msgstr "현재 풋프린트가 수정되었습니다.  변경사항을 저장할까요?"

#: pcbnew/kicad_clipboard.cpp:444
msgid "Clipboard content is not KiCad compatible"
msgstr "클립보드의 내용물이 KiCad와 호환되지 않습니다"

#: pcbnew/load_select_footprint.cpp:285
#, c-format
msgid "Footprints [%u items]"
msgstr "풋프린트 [%u 항목]"

#: pcbnew/load_select_footprint.cpp:352
#, fuzzy, c-format
msgid "Unable to find a writer for '%s'."
msgstr "'%s'에 대한 PDF 뷰어를 찾을 수 없음."

#: pcbnew/load_select_footprint.cpp:366
#, c-format
msgid "Footprint '%s' saved."
msgstr "풋프린트 '%s'이(가) 저장되었습니다."

#: pcbnew/load_select_footprint.cpp:376
#, c-format
msgid "Footprint library '%s' saved as '%s'."
msgstr "풋프린트 라이브러리 '%s'이(가) '%s'(으)로 저장되었습니다."

#: pcbnew/menubar_footprint_editor.cpp:67
#: pcbnew/menubar_footprint_editor.cpp:76
msgid "Footprint..."
msgstr "풋프린트…"

#: pcbnew/menubar_footprint_editor.cpp:77
msgid "View as &PNG..."
msgstr "&PNG로 보기..."

#: pcbnew/menubar_footprint_editor.cpp:78
msgid "Create a PNG file from the current view"
msgstr "현재 시점으로부터 PNG 파일 생성하기"

#: pcbnew/menubar_footprint_editor.cpp:134 pcbnew/menubar_pcb_editor.cpp:243
msgid "&Drawing Mode"
msgstr "드로잉 모드 (&D)"

#: pcbnew/menubar_footprint_editor.cpp:144 pcbnew/menubar_pcb_editor.cpp:268
msgid "&Contrast Mode"
msgstr "고대비 모드 (&C)"

#: pcbnew/menubar_footprint_editor.cpp:205
msgid "&Load Footprint from PCB..."
msgstr "PCB에서 풋프린트 불러오기 (&L)..."

#: pcbnew/menubar_footprint_editor.cpp:206
msgid "Load a footprint from the current board into the editor"
msgstr "현재 기판으로부터 풋프린트를 편집기로 불러오기"

#: pcbnew/menubar_footprint_editor.cpp:210
msgid "&Insert Footprint on PCB"
msgstr "PCB에 풋프린트 삽입 (&I)"

#: pcbnew/menubar_footprint_editor.cpp:211
msgid "Insert footprint onto current board"
msgstr "현재 기판에 풋프린트 삽입"

#: pcbnew/menubar_pcb_editor.cpp:104
msgid "Resc&ue"
msgstr "복구 (&u)"

#: pcbnew/menubar_pcb_editor.cpp:105
msgid "Clear board and get last rescue file automatically saved by PCB editor"
msgstr ""
"보드 삭제 후 PCB 편집기에 의해 자동 저장된 마지막 복구 파일을 불러옵니다"

#: pcbnew/menubar_pcb_editor.cpp:115
msgid "Specctra Session..."
msgstr "Specctra 세션..."

#: pcbnew/menubar_pcb_editor.cpp:117
msgid "Non-KiCad Board File..."
msgstr "비 KiCad 기판 파일..."

#: pcbnew/menubar_pcb_editor.cpp:118
msgid "Import board file from other applications"
msgstr "다른 응용 프로그램에서 기판 파일 가져오기"

#: pcbnew/menubar_pcb_editor.cpp:129
msgid "Specctra DSN..."
msgstr "Specctra DSN..."

#: pcbnew/menubar_pcb_editor.cpp:130
msgid "GenCAD..."
msgstr "GenCAD..."

#: pcbnew/menubar_pcb_editor.cpp:130
msgid "Export GenCAD board representation"
msgstr "GenCAD 보드 표현을 내보내기"

#: pcbnew/menubar_pcb_editor.cpp:132
msgid "VRML..."
msgstr "VRML..."

#: pcbnew/menubar_pcb_editor.cpp:132
msgid "Export VRML 3D board representation"
msgstr "VRML 3D 보드 표현 내보내기"

#: pcbnew/menubar_pcb_editor.cpp:134
msgid "IDFv3..."
msgstr "IDFv3..."

#: pcbnew/menubar_pcb_editor.cpp:134
msgid "Export IDF 3D board representation"
msgstr "IDF 3D 보드 표현 내보내기"

#: pcbnew/menubar_pcb_editor.cpp:136
msgid "STEP..."
msgstr "STEP..."

#: pcbnew/menubar_pcb_editor.cpp:136
msgid "Export STEP 3D board representation"
msgstr "STEP 3D 보드 표현 내보내기"

#: pcbnew/menubar_pcb_editor.cpp:138
msgid "SVG..."
msgstr "SVG..."

#: pcbnew/menubar_pcb_editor.cpp:138
msgid "Export SVG board representation"
msgstr "SVG 기판 표현 내보내기"

#: pcbnew/menubar_pcb_editor.cpp:140
msgid "Footprint Association (.cmp) File..."
msgstr "풋프린트 연결 (.cmp) 파일..."

#: pcbnew/menubar_pcb_editor.cpp:141
msgid "Export footprint association file (*.cmp) for schematic back annotation"
msgstr "회로도 역주석을 위한 풋프린트 연결 파일(*.cmp) 내보내기"

#: pcbnew/menubar_pcb_editor.cpp:143
msgid "Hyperlynx..."
msgstr "Hyperlynx..."

#: pcbnew/menubar_pcb_editor.cpp:150
msgid "Footprints to Library..."
msgstr "풋프린트를 라이브러리로 내보내기..."

#: pcbnew/menubar_pcb_editor.cpp:151
msgid ""
"Add footprints used on board to an existing footprint library\n"
"(does not remove other footprints from this library)"
msgstr ""
"기판에서 사용되는 풋프린트를 기존 풋프린트 라이브러리에 추가합니다\n"
"(이 라이브러리에서 다른 풋프린트를 제거하지 않음)"

#: pcbnew/menubar_pcb_editor.cpp:155
msgid "Footprints to New Library..."
msgstr "풋프린트를 새 라이브러리로 내보내기.."

#: pcbnew/menubar_pcb_editor.cpp:156
msgid ""
"Create a new footprint library containing the footprints used on board\n"
"(if the library already exists it will be replaced)"
msgstr ""
"기판에서 사용된 풋프린트를 포함하는 새 풋프린트 라이브러리를 만듭니다\n"
"(이미 존재하는 라이브러리는 대체됨)"

#: pcbnew/menubar_pcb_editor.cpp:164
msgid "Fabrication Outputs"
msgstr "기판 제조 출력"

#: pcbnew/menubar_pcb_editor.cpp:297
msgid "Add Microwave Shape"
msgstr "마이크로파 형태 추가"

#: pcbnew/menubar_pcb_editor.cpp:318
#, fuzzy
msgid "Add Dimension"
msgstr "치수"

#: pcbnew/menubar_pcb_editor.cpp:339
msgid "Auto-Place Footprints"
msgstr "풋프린트 자동 배치"

#: pcbnew/menubar_pcb_editor.cpp:430
msgid "External Plugins"
msgstr "외부 플러그인"

#: pcbnew/menubar_pcb_editor.cpp:462
msgid "Ro&ute"
msgstr "배선하기 (&u)"

#: pcbnew/microwave/microwave_footprint.cpp:57
msgid "Gap Size:"
msgstr "갭 크기:"

#: pcbnew/microwave/microwave_footprint.cpp:63
msgid "Stub Size:"
msgstr "스텁 크기:"

#: pcbnew/microwave/microwave_footprint.cpp:70
msgid "Arc Stub Radius Value:"
msgstr "호 스텁 반경 값:"

#: pcbnew/microwave/microwave_footprint.cpp:81
#: pcbnew/microwave/microwave_footprint.cpp:95
msgid "Create Microwave Footprint"
msgstr "마이크로파 풋프린트 생성"

#: pcbnew/microwave/microwave_footprint.cpp:94
msgid "Angle in degrees:"
msgstr "각도 (도 기준):"

#: pcbnew/microwave/microwave_footprint.cpp:106
msgid "Incorrect number, abort"
msgstr "잘못된 번호, 중단됨"

#: pcbnew/microwave/microwave_inductor.cpp:316
msgid "Add microwave inductor"
msgstr "마이크로파 인덕터 추가"

#: pcbnew/microwave/microwave_inductor.cpp:366
msgid "Length of Trace:"
msgstr "추적의 길이:"

#: pcbnew/microwave/microwave_inductor.cpp:376
msgid "Requested length < minimum length"
msgstr "요청한 길이 < 최소 길이"

#: pcbnew/microwave/microwave_inductor.cpp:390
msgid "Requested length too large"
msgstr "요청한 길이가 너무 큼"

#: pcbnew/microwave/microwave_inductor.cpp:393
msgid "Requested length too small"
msgstr "요청한 길이가 너무 작음"

#: pcbnew/microwave/microwave_inductor.cpp:396
msgid "Requested length can't be represented"
msgstr "요청한 길이를 표현할 수 없습니다"

#: pcbnew/microwave/microwave_inductor.cpp:404
msgid "Component Value:"
msgstr "컴포넌트 값:"

#: pcbnew/microwave/microwave_polygon.cpp:110
msgid "Complex Shape"
msgstr "복합적인 형상"

#: pcbnew/microwave/microwave_polygon.cpp:127
msgid "Symmetrical"
msgstr "대칭"

#: pcbnew/microwave/microwave_polygon.cpp:167
msgid "Read Shape Description File..."
msgstr "형상 설명 파일 읽기..."

#: pcbnew/microwave/microwave_polygon.cpp:209
msgid "Shape Description File"
msgstr "형상 설명 파일"

#: pcbnew/microwave/microwave_polygon.cpp:313
msgid "Shape has a null size."
msgstr "형상의 크기가 없습니다."

#: pcbnew/microwave/microwave_polygon.cpp:319
msgid "Shape has no points."
msgstr "형상에 포인트가 없습니다."

#: pcbnew/microwave/microwave_tool.cpp:92
msgid "Place microwave feature"
msgstr "마이크로파 특성 배치"

#: pcbnew/netinfo_item.cpp:137
msgid "On Board"
msgstr "기판 위"

#: pcbnew/netinfo_item.cpp:140
msgid "In Package"
msgstr "패키지"

#: pcbnew/netlist_reader/board_netlist_updater.cpp:140
#, c-format
msgid "Cannot add %s (no footprint assigned)."
msgstr "%s을(를) 추가할 수 없습니다 (할당된 풋프린트 없음)."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:152
#, c-format
msgid "Cannot add %s (footprint '%s' not found)."
msgstr "%s을(를) 추가할 수 없습니다 (풋프린트 '%s'을(를) 찾을 수 없음)."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:162
#, c-format
msgid "Add %s (footprint '%s')."
msgstr "%s 추가 (풋프린트 '%s')."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:192
#, c-format
msgid "Added %s (footprint '%s')."
msgstr "%s이(가) 추가되었습니다 (풋프린트 '%s')."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:210
#, c-format
msgid "Cannot update %s (no footprint assigned)."
msgstr "%s을(를) 업데이트할 수 없습니다 (할당된 풋프린트 없음)."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:222
#, c-format
msgid "Cannot update %s (footprint '%s' not found)."
msgstr "%s을(를) 업데이트할 수 없습니다 (풋프린트 '%s'을(를) 찾을 수 없음)."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:232
#, c-format
msgid "Change %s footprint from '%s' to '%s'."
msgstr "풋프린트 %s을(를) '%s'에서 '%s'(으)로 변경합니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:244
#, c-format
msgid "Changed %s footprint from '%s' to '%s'."
msgstr "풋프린트 %s을(를) '%s'에서 '%s'(으)로 변경하였습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:277
#, c-format
msgid "Change %s reference designator to %s."
msgstr "참조 지정자 %s을(를) %s(으)로 변경합니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:283
#, c-format
msgid "Changed %s reference designator to %s."
msgstr "참조 지정자 %s을(를) %s(으)로 변경하였습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:299
#, c-format
msgid "Change %s value from %s to %s."
msgstr "값 %s을(를) %s에서 %s(으)로 변경합니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:306
#, c-format
msgid "Changed %s value from %s to %s."
msgstr "값 %s을(를) %s에서 %s(으)로 변경하였습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:345
#, c-format
msgid "Update %s symbol association from %s to %s."
msgstr "%s 심볼 관련성을 %s에서 %s(으)로 업데이트합니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:352
#, c-format
msgid "Updated %s symbol association from %s to %s."
msgstr "%s 심볼 관련성을 %s에서 %s(으)로 업데이트하였습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:399
#, c-format
msgid "Update %s fields."
msgstr "%s 필드 업데이트."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:410
#, c-format
msgid "Remove %s footprint fields not in symbol."
msgstr "심볼에 없는 %s 풋프린트 필드 제거."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:419
#, c-format
msgid "Updated %s fields."
msgstr "%s 필드 업데이트."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:464
#, c-format
msgid "Removed %s footprint fields not in symbol."
msgstr "심볼에 없는 %s 풋프린트 필드를 제거했습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:495
#, c-format
msgid "Update %s sheetname to '%s'."
msgstr "%s 시트 이름을 '%s'로 업데이트합니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:502
#, c-format
msgid "Updated %s sheetname to '%s'."
msgstr "%s 시트 이름을 '%s'로 업데이트했습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:514
#, c-format
msgid "Update %s sheetfile to '%s'."
msgstr "%s 시트 파일을 '%s'로 업데이트합니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:521
#, c-format
msgid "Updated %s sheetfile to '%s'."
msgstr "%s 시트 파일을 '%s'로 업데이트했습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:533
#, c-format
msgid "Update %s footprint filters to '%s'."
msgstr "%s 풋프린트 필터를 '%s'로 업데이트합니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:540
#, c-format
msgid "Updated %s footprint filters to '%s'."
msgstr "%s 풋프린트 필터를 '%s'로 업데이트했습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:555
#, c-format
msgid "Add %s 'exclude from BOM' fabrication attribute."
msgstr "%s에 'BOM에서 제외' 제작 속성을 추가합니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:560
#, c-format
msgid "Remove %s 'exclude from BOM' fabrication attribute."
msgstr "%s에서 'BOM에서 제외' 제작 속성을 제거합니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:571
#, c-format
msgid "Added %s 'exclude from BOM' fabrication attribute."
msgstr "%s에 'BOM에서 제외' 제작 속성이 추가되었습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:577
#, c-format
msgid "Removed %s 'exclude from BOM' fabrication attribute."
msgstr "%s에 'BOM에서 제외' 제작 속성이 제거되었습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:595
#, fuzzy, c-format
msgid "Add %s 'Do not place' fabrication attribute."
msgstr "%s에 'BOM에서 제외' 제작 속성을 추가합니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:600
#, fuzzy, c-format
msgid "Remove %s 'Do not place' fabrication attribute."
msgstr "%s에서 'BOM에서 제외' 제작 속성을 제거합니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:611
#, fuzzy, c-format
msgid "Added %s 'Do not place' fabrication attribute."
msgstr "%s에 'BOM에서 제외' 제작 속성이 추가되었습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:617
#, fuzzy, c-format
msgid "Removed %s 'Do not place' fabrication attribute."
msgstr "%s에 'BOM에서 제외' 제작 속성이 제거되었습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:702
#, c-format
msgid "Disconnect %s pin %s."
msgstr "%s 핀 %s의 연결을 끊습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:708
#, c-format
msgid "Disconnected %s pin %s."
msgstr "%s 핀 %s의 연결이 끊어졌습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:718
#, c-format
msgid "No net found for component %s pad %s (no pin %s in symbol)."
msgstr "컴포넌트 %s 패드 %s에 대한 네트를 찾을 수 없습니다(심볼에 핀 %s 없음)."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:779
#, c-format
msgid "Add net %s."
msgstr "네트 %s을(를) 추가합니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:789
#, c-format
msgid "Reconnect %s pin %s from %s to %s."
msgstr "%s 핀 %s을(를) %s에서 %s(으)로 재연결합니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:797
#, c-format
msgid "Reconnected %s pin %s from %s to %s."
msgstr "%s 핀 %s이(가) %s에서 %s(으)로 재연결되었습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:808
#, c-format
msgid "Connect %s pin %s to %s."
msgstr "%s 핀 %s을(를) %s에 연결합니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:815
#, c-format
msgid "Connected %s pin %s to %s."
msgstr "%s 핀 %s을(를) %s에 연결했습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:896
#, c-format
msgid "Reconnect via from %s to %s."
msgstr "비아를 %s에서 %s(으)로 다시 연결합니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:916
#, c-format
msgid "Reconnected via from %s to %s."
msgstr "비아가 %s에서 %s(으)로 다시 연결되었습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:926
#, c-format
msgid "Via connected to unknown net (%s)."
msgstr "비아가 알 수 없는 네트 (%s) 에 연결되었습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:971
#, c-format
msgid "Reconnect copper zone '%s' from %s to %s."
msgstr "구리 영역 '%s'을(를) %s에서 %s(으)로 다시 연결합니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:978
#, c-format
msgid "Reconnect copper zone from %s to %s."
msgstr "구리 영역을 %s에서 %s(으)로 다시 연결합니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:1001
#, c-format
msgid "Reconnected copper zone '%s' from %s to %s."
msgstr "구리 영역 '%s'이(가) %s에서 %s(으)로 다시 연결되었습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:1008
#, c-format
msgid "Reconnected copper zone from %s to %s."
msgstr "구리 영역이 %s에서 %s(으)로 다시 연결되었습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:1021
#, c-format
msgid "Copper zone '%s' has no pads connected."
msgstr "구리 영역 '%s' 에는 연결된 패드가 없습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:1029
#, c-format
msgid "Copper zone on layer %s at (%s, %s) has no pads connected."
msgstr "레이어 %s의 (%s, %s) 구리 영역에는 연결된 패드가 없습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:1070
#, c-format
msgid ""
"Symbol %s has pins with no number.  These pins can not be matched to pads in "
"%s."
msgstr ""
"심볼 %s에는 번호가 없는 핀이 있습니다. 이 핀은 %s의 패드와 일치시킬 수 없습니"
"다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:1080
#, c-format
msgid "%s pad %s not found in %s."
msgstr "%s 패드 %s을(를) %s에서 찾을 수 없습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:1130
#, c-format
msgid "Processing symbol '%s:%s'."
msgstr "심볼 '%s:%s' 처리 중입니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:1199
#, c-format
msgid "Multiple footprints found for '%s'."
msgstr "'%s'에 대해 여러 풋프린트를 찾았습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:1230
#, c-format
msgid "Cannot remove unused footprint %s (locked)."
msgstr "사용하지 않은 풋프린트 %s을(를) 제거할 수 없습니다 (잠김)."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:1235
#, c-format
msgid "Could not remove unused footprint %s (locked)."
msgstr "사용하지 않은 풋프린트 %s을(를) 제거할 수 없습니다 (잠김)."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:1248
#, c-format
msgid "Remove unused footprint %s."
msgstr "사용하지 않은 풋프린트 %s을(를) 제거합니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:1256
#, c-format
msgid "Removed unused footprint %s."
msgstr "사용하지 않은 풋프린트 %s을(를) 제거했습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:1283
#, c-format
msgid "Removed unused net %s."
msgstr "사용하지 않은 네트 %s을(를) 제거했습니다."

#: pcbnew/netlist_reader/board_netlist_updater.cpp:1294
msgid "Update netlist"
msgstr "네트리스트 업데이트"

#: pcbnew/netlist_reader/board_netlist_updater.cpp:1315
#, c-format
msgid "Total warnings: %d, errors: %d."
msgstr "총 경고: %d개, 오류: %d개."

#: pcbnew/netlist_reader/kicad_netlist_reader.cpp:271
#, c-format
msgid "Cannot find component with ref '%s' in netlist."
msgstr "네트리스트에서 참조 '%s'에 해당하는 컴포넌트를 찾을 수 없습니다."

#: pcbnew/netlist_reader/kicad_netlist_reader.cpp:480
#, c-format
msgid ""
"Invalid footprint ID in\n"
"file: '%s'\n"
"line: %d\n"
"offset: %d"
msgstr ""
"잘못된 풋프린트 ID가\n"
"파일: '%s'\n"
"행: %d\n"
"오프셋: %d에서 발견됨"

#: pcbnew/netlist_reader/legacy_netlist_reader.cpp:114
msgid "Cannot parse time stamp in symbol section of netlist."
msgstr "네트리스트의 심볼 영역에선 타임 스탬프를 파싱할 수 없습니다."

#: pcbnew/netlist_reader/legacy_netlist_reader.cpp:124
msgid "Cannot parse footprint name in symbol section of netlist."
msgstr "네트리스트의 심볼 영역에선 풋프린트를 파싱할 수 없습니다."

#: pcbnew/netlist_reader/legacy_netlist_reader.cpp:138
msgid "Cannot parse reference designator in symbol section of netlist."
msgstr "네트리스트의 심볼 영역에서 참조 지정자를 파싱할 수 없습니다."

#: pcbnew/netlist_reader/legacy_netlist_reader.cpp:148
msgid "Cannot parse value in symbol section of netlist."
msgstr "네트리스트의 심볼 영역에서 값을 파싱할 수 없습니다."

#: pcbnew/netlist_reader/legacy_netlist_reader.cpp:185
msgid "Cannot parse pin name in symbol net section of netlist."
msgstr "네트리스트의 심볼 네트 영역에서 핀 이름을 파싱할 수 없습니다."

#: pcbnew/netlist_reader/legacy_netlist_reader.cpp:194
msgid "Cannot parse net name in symbol net section of netlist."
msgstr "네트리스트의 심볼 네트 영역에서 네트 이름을 파싱할 수 없습니다."

#: pcbnew/netlist_reader/legacy_netlist_reader.cpp:242
#, c-format
msgid "Cannot find symbol %s in footprint filter section of netlist."
msgstr "네트리스트의 풋프린트 필터 영역에서 심볼 %s을(를) 찾을 수 없습니다."

#: pcbnew/netlist_reader/netlist.cpp:63
#, c-format
msgid "Cannot open netlist file '%s'."
msgstr "네트리스트 파일 '%s'을(를) 열 수 없습니다."

#: pcbnew/netlist_reader/netlist.cpp:74
#, c-format
msgid ""
"Error loading netlist.\n"
"%s"
msgstr ""
"네트리스트를 불러오는 도중에 오류가 발생하였습니다.\n"
"%s"

#: pcbnew/netlist_reader/netlist.cpp:164
#, c-format
msgid "No footprint defined for symbol %s."
msgstr "심볼 %s에 대해 지정된 풋프린트가 없음."

#: pcbnew/netlist_reader/netlist.cpp:191
#, c-format
msgid "Footprint of %s changed: board footprint '%s', netlist footprint '%s'."
msgstr ""
"%s의 풋프린트가 변경되었습니다: 기판 풋프린트 '%s', 네트리스트 풋프린트 '%s'."

#: pcbnew/netlist_reader/netlist.cpp:214
#, c-format
msgid "%s footprint ID '%s' is not valid."
msgstr "%s 풋프린트 ID '%s'은(는) 유효하지 않습니다."

#: pcbnew/netlist_reader/netlist.cpp:231
#, c-format
msgid ""
"%s footprint '%s' not found in any libraries in the footprint library table."
msgstr "%s 풋 프린트 라이브러리 테이블에서 \"%s \"풋프린트를 찾을 수 없습니다."

#: pcbnew/netlist_reader/netlist_reader.cpp:184
#, c-format
msgid ""
"Invalid footprint ID in\n"
"file: '%s'\n"
"line: %d"
msgstr ""
"잘못된 풋프린트 ID가\n"
"파일: '%s'\n"
"행: %d에서 발견됨"

#: pcbnew/pad.cpp:825 pcbnew/pad.cpp:948 pcbnew/pad.cpp:957 pcbnew/pad.cpp:966
msgid "pad"
msgstr "패드"

#: pcbnew/pad.cpp:989 pcbnew/pad.cpp:1967
msgid "Pin Type"
msgstr "핀 유형"

#: pcbnew/pad.cpp:1014
msgid "BGA"
msgstr "BGA"

#: pcbnew/pad.cpp:1015
msgid "Fiducial global"
msgstr "전역 기준"

#: pcbnew/pad.cpp:1016
msgid "Fiducial local"
msgstr "지역 기준"

#: pcbnew/pad.cpp:1017
msgid "Test point"
msgstr "테스트 포인트"

#: pcbnew/pad.cpp:1018
msgid "Heat sink"
msgstr "히트 싱크"

#: pcbnew/pad.cpp:1019
msgid "Castellated"
msgstr "카스텔레이티드"

#: pcbnew/pad.cpp:1048
msgid "Length in Package"
msgstr "패키지 내부 길이"

#: pcbnew/pad.cpp:1062
msgid "Hole X / Y"
msgstr "홀 X / Y"

#: pcbnew/pad.cpp:1074 pcbnew/pcb_track.cpp:1108 pcbnew/pcb_track.cpp:1146
#: pcbnew/router/router_tool.cpp:2714 pcbnew/router/router_tool.cpp:2743
#: pcbnew/zone.cpp:644
#, c-format
msgid "Min Clearance: %s"
msgstr "최소 클리어런스: %s"

#: pcbnew/pad.cpp:1234
msgid "Trap"
msgstr "트랩"

#: pcbnew/pad.cpp:1235
msgid "Roundrect"
msgstr "모서리를 둥글린 직사각형"

#: pcbnew/pad.cpp:1236
msgid "Chamferedrect"
msgstr "모따기된 직사각형"

#: pcbnew/pad.cpp:1237
msgid "CustomShape"
msgstr "사용자 정의 도형"

#: pcbnew/pad.cpp:1249
msgid "Conn"
msgstr "커넥터"

#: pcbnew/pad.cpp:1262
#, c-format
msgid "Pad %s of %s on %s"
msgstr "%s의 %s에 대한 패드 (%s 위)"

#: pcbnew/pad.cpp:1269
#, c-format
msgid "NPTH pad of %s"
msgstr "%s의 NPTH 패드"

#: pcbnew/pad.cpp:1273
#, c-format
msgid "PTH pad %s of %s"
msgstr "%s의 PTH 패드%s"

#: pcbnew/pad.cpp:1282
#, c-format
msgid "Pad %s %s of %s on %s"
msgstr "패드 %s %s의 %s 위%s"

#: pcbnew/pad.cpp:1290
#, c-format
msgid "NPTH of %s"
msgstr "%s의 NPTH"

#: pcbnew/pad.cpp:1294
#, c-format
msgid "PTH pad %s %s of %s"
msgstr "%s의 PTH 패드%s%s"

#: pcbnew/pad.cpp:1880
msgid "Edge connector"
msgstr "모서리 커넥터"

#: pcbnew/pad.cpp:1881
msgid "NPTH, mechanical"
msgstr "NPTH, 기계 홀"

#: pcbnew/pad.cpp:1887
msgid "Trapezoid"
msgstr "사다리꼴"

#: pcbnew/pad.cpp:1899
msgid "Castellated pad"
msgstr "카스텔레이티드 패드"

#: pcbnew/pad.cpp:1951
msgid "Pad Type"
msgstr "패드 유형"

#: pcbnew/pad.cpp:1955
#, fuzzy
msgid "Pad Shape"
msgstr "패드 모양"

#: pcbnew/pad.cpp:1959
msgid "Pad Number"
msgstr "패드 번호"

#: pcbnew/pad.cpp:1971
msgid "Size X"
msgstr "X 크기"

#: pcbnew/pad.cpp:1974
msgid "Size Y"
msgstr "Y 크기"

#: pcbnew/pad.cpp:1987
#, fuzzy
msgid "Corner Radius Ratio"
msgstr "둥근 모서리 반경 비율"

#: pcbnew/pad.cpp:1999
msgid "Hole Size X"
msgstr "홀 사이즈 X"

#: pcbnew/pad.cpp:2005
msgid "Hole Size Y"
msgstr "홀 사이즈 Y"

#: pcbnew/pad.cpp:2011
msgid "Fabrication Property"
msgstr "기판 제조 속성"

#: pcbnew/pad.cpp:2026
msgid "Soldermask Margin Override"
msgstr "솔더 마스크 여백 재정의"

#: pcbnew/pad.cpp:2044 pcbnew/zone.cpp:1743
msgid "Thermal Relief Spoke Width"
msgstr "단열판 스포크 폭"

#: pcbnew/pad.cpp:2049
msgid "Thermal Relief Spoke Angle"
msgstr "단열판 스포크 각도"

#: pcbnew/pad.cpp:2053 pcbnew/zone.cpp:1737
msgid "Thermal Relief Gap"
msgstr "단열판 간격"

#: pcbnew/pcb_base_frame.cpp:1209
msgid ""
"The library containing the current footprint has changed.\n"
"Do you want to reload the footprint?"
msgstr ""
"현재 풋프린트가 포함된 라이브러리가 변경되었습니다.\n"
"풋프린트를 다시 로드하시겠습니까?"

#: pcbnew/pcb_dimension.cpp:398 pcbnew/pcb_dimension.cpp:1449
msgid "Prefix"
msgstr "접두사"

#: pcbnew/pcb_dimension.cpp:402 pcbnew/pcb_dimension.cpp:1457
msgid "Override Text"
msgstr "텍스트 재정의"

#: pcbnew/pcb_dimension.cpp:420 pcbnew/pcb_dimension.cpp:1453
msgid "Suffix"
msgstr "접미사"

#: pcbnew/pcb_dimension.cpp:550
#, c-format
msgid "Dimension '%s' on %s"
msgstr "치수 '%s' (%s 위)"

#: pcbnew/pcb_dimension.cpp:1416
msgid "1234.0"
msgstr "1234.0"

#: pcbnew/pcb_dimension.cpp:1417
msgid "1234.0 mm"
msgstr "1234.0 mm"

#: pcbnew/pcb_dimension.cpp:1418
msgid "1234.0 (mm)"
msgstr "1234.0 (밀리미터)"

#: pcbnew/pcb_dimension.cpp:1471
msgid "Units Format"
msgstr "단위 형식"

#: pcbnew/pcb_dimension.cpp:1479
msgid "Suppress Trailing Zeroes"
msgstr "뒷자리 0 표시하지 않음"

#: pcbnew/pcb_dimension.cpp:1508
msgid "Crossbar Height"
msgstr "크로스바 높이"

#: pcbnew/pcb_dimension.cpp:1512
msgid "Extension Line Overshoot"
msgstr "연장선 초과"

#: pcbnew/pcb_dimension.cpp:1589
msgid "Leader Length"
msgstr "지시선 길이"

#: pcbnew/pcb_dimension.cpp:1635
msgid "Text Frame"
msgstr "텍스트 프레임"

#: pcbnew/pcb_edit_frame.cpp:212
msgid "KiCad PCB Editor"
msgstr "KiCad PCB 편집기"

#: pcbnew/pcb_edit_frame.cpp:218
msgid "Export netlist used to update schematics"
msgstr "회로도를 업데이트하기 위해 사용된 네트리스트 내보내기"

#: pcbnew/pcb_edit_frame.cpp:423
msgid "New PCB file is unsaved"
msgstr "새 PCB 파일이 저장되지 않았음"

#: pcbnew/pcb_edit_frame.cpp:1509
msgid "Board file is read only."
msgstr "기판 파일은 읽기 전용입니다."

#: pcbnew/pcb_edit_frame.cpp:1544
msgid "PCB file changes are unsaved"
msgstr "PCB 파일 변경점이 저장되지 않음"

#: pcbnew/pcb_edit_frame.cpp:1840
msgid "The schematic for this board cannot be found."
msgstr "이 기판의 회로도를 찾을 수 없습니다."

#: pcbnew/pcb_edit_frame.cpp:1866
msgid ""
"Cannot update the PCB because PCB editor is opened in stand-alone mode. In "
"order to create or update PCBs from schematics, you must launch the KiCad "
"project manager and create a project."
msgstr ""
"PCB 에디터가 스탠드얼론 모드로 실행 중이기 때문에 PCB를 업데이트할 수 없습니"
"다. 회로도로부터 PCB를 생성하거나 업데이트하려면, KiCad 프로젝트 매니저를 실"
"행하여 프로젝트를 생성하세요."

#: pcbnew/pcb_edit_frame.cpp:1891 pcbnew/pcbnew_jobs_handler.cpp:1035
msgid "Eeschema netlist"
msgstr "Eeschema 네트리스트"

#: pcbnew/pcb_edit_frame.cpp:1902
msgid ""
"Received an error while reading netlist.  Please report this issue to the "
"KiCad team using the menu Help->Report Bug."
msgstr ""
"넷리스트를 읽는 동안 오류가 발생했습니다. 도움말->버그 보고 메뉴를 사용하여 "
"KiCad 팀에 이 문제를 보고하십시오."

#: pcbnew/pcb_edit_frame.cpp:1929
#, c-format
msgid "Schematic file '%s' not found."
msgstr "회로도 파일 '%s'을(를) 찾을 수 없습니다."

#: pcbnew/pcb_edit_frame.cpp:1959
msgid "Eeschema failed to load."
msgstr "Eeschema 로드에 실패했습니다."

#: pcbnew/pcb_edit_frame.cpp:2393
msgid "Edit design rules"
msgstr "디자인 규칙 편집"

#: pcbnew/pcb_edit_frame.cpp:2405
msgid "Could not compile custom design rules."
msgstr "사용자 정의 디자인 규칙을 컴파일할 수 없습니다."

#: pcbnew/pcb_edit_frame.cpp:2443
msgid "Export Hyperlynx Layout"
msgstr "Hyperlynx 레이아웃 내보내기"

#: pcbnew/pcb_edit_frame.cpp:2495
msgid "Violation Report"
msgstr "위반 보고서"

#: pcbnew/pcb_edit_frame.cpp:2505
msgid "Clearance Report"
msgstr "클리어런스 보고서"

#: pcbnew/pcb_edit_frame.cpp:2515
msgid "Constraints Report"
msgstr "제약 보고서"

#: pcbnew/pcb_edit_frame.cpp:2525 pcbnew/tools/pcb_actions.cpp:1884
msgid "Compare Footprint with Library"
msgstr "라이브러리와 풋프린트 비교"

#: pcbnew/pcb_field.cpp:93
#, fuzzy
msgid "User Field"
msgstr "사용자 필드"

#: pcbnew/pcb_field.cpp:102
#, c-format
msgid "Reference '%s'"
msgstr "참조 '%s'"

#: pcbnew/pcb_field.cpp:106
#, c-format
msgid "Value '%s' of %s"
msgstr "값 '%s' (%s)"

#: pcbnew/pcb_field.cpp:111
#, fuzzy, c-format
msgid "Footprint '%s' of %s"
msgstr "풋프린트 텍스트 '%s'의%s"

#: pcbnew/pcb_field.cpp:115
#, fuzzy, c-format
msgid "Datasheet '%s' of %s"
msgstr "값 '%s' (%s)"

#: pcbnew/pcb_field.cpp:123
#, c-format
msgid "Field '%s' of %s"
msgstr "필드 '%s'의 %s"

#: pcbnew/pcb_generator.cpp:187 pcbnew/pcb_generator.cpp:224
#, fuzzy
msgid "Update Order"
msgstr "업데이트됨"

#: pcbnew/pcb_generator.cpp:222
#, fuzzy
msgid "Generator Properties"
msgstr "스크립트 생성기 속성"

#: pcbnew/pcb_group.cpp:368
#, c-format
msgid "Unnamed Group, %zu members"
msgstr "이름없는 그룹, %zu 멤버"

#: pcbnew/pcb_group.cpp:370
#, c-format
msgid "Group '%s', %zu members"
msgstr "그룹 '%s', %zu 멤버"

#: pcbnew/pcb_group.cpp:382
msgid "<unnamed>"
msgstr "<이름 없음>"

#: pcbnew/pcb_group.cpp:383
msgid "Members"
msgstr "멤버"

#: pcbnew/pcb_io/altium/altium_parser_pcb.cpp:135
#, c-format
msgid "Unknown mapping of the Altium layer '%s'."
msgstr "Altium 레이어 '%s' 에 대하여 알 수 없는 매핑이 있습니다."

#: pcbnew/pcb_io/altium/altium_parser_pcb.cpp:183
#, c-format
msgid "Unknown Mode string: '%s'."
msgstr "알 수 없는 모드 문자열: '%s'."

#: pcbnew/pcb_io/altium/altium_parser_pcb.cpp:210
#, c-format
msgid "Unknown Record name string: '%s'."
msgstr "알 수 없는 레코드 이름 문자열: '%s'."

#: pcbnew/pcb_io/altium/altium_parser_pcb.cpp:224
#, c-format
msgid "Unknown Extended Primitive Information type: '%s'."
msgstr "알 수 없는 확장 기본 정보 유형: '%s'."

#: pcbnew/pcb_io/altium/altium_parser_pcb.cpp:864
#, c-format
msgid "Pads6 stream has unexpected length for subrecord 6: %d."
msgstr ""
"Pads6 스트림이 서브레코드 6에 대하여 예상치 못한 길이 %d을(를) 얻었습니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:255
#, c-format
msgid ""
"Altium layer (%d) has no KiCad equivalent. It has been moved to KiCad layer "
"Eco1_User."
msgstr ""
"Altium 레이어(%d)에는 KiCad에 해당하는 항목이 없습니다. KiCad 레이어 "
"Eco1_User로 이동되었습니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:440
#, c-format
msgid "'%s' was not parsed correctly."
msgstr "'%s'은(는) 제대로 파싱되지 않았습니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:448
#, c-format
msgid "'%s' was not fully parsed."
msgstr "'%s'은(는) 완전히 파싱되지 않았습니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:465
msgid ""
"This file does not appear to be in a valid PCB Binary Version 6.0 format. In "
"Altium Designer, make sure to save as \"PCB Binary Files (*.PcbDoc)\"."
msgstr ""
"이 파일은 유효한 PCB 바이너리 버전 6.0 형식이 아닌 것 같습니다. Altium "
"Designer에서 \"PCB 바이너리 파일(*.PcbDoc)\"로 저장해야 합니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:503
#, c-format
msgid "File not found: '%s' for directory '%s'."
msgstr "파일을 찾을 수 없음: '%s' 디렉터리에 대한 '%s' 파일입니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:651
#: pcbnew/pcb_io/altium/pcb_io_altium_designer.cpp:291
#, c-format
msgid "Footprint directory not found: '%s'."
msgstr "풋프린트 디렉토리를 찾을 수 없음: '%s'."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:659
#: pcbnew/pcb_io/altium/altium_pcb.cpp:688
#: pcbnew/pcb_io/altium/pcb_io_altium_designer.cpp:208
#, c-format
msgid "File not found: '%s'."
msgstr "파일을 찾지 못했습니다: '%s'."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:770
#, c-format
msgid "Record of unknown type: '%d'."
msgstr "알 수 없는 유형의 기록: '%d'."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:863
msgid "Loading extended primitive information data..."
msgstr "확장된 기본 정보 데이터 로드 중..."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:884
msgid "Loading board data..."
msgstr "보드 데이터 로드 중..."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:1064
msgid "Loading netclasses..."
msgstr "네트클래스 로드 중..."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:1090
#, c-format
msgid ""
"More than one Altium netclass with name '%s' found. Only the first one will "
"be imported."
msgstr ""
"이름이 '%s'인 Altium 넷클래스가 두 개 이상 발견되었습니다. 첫 번째 클래스만 "
"가져옵니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:1110
msgid "Loading components..."
msgstr "컴포넌트 로드 중..."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:1171
msgid "Loading component 3D models..."
msgstr "컴포넌트 3D 모델을 불러오는 중..."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:1250
#: pcbnew/pcb_io/altium/altium_pcb.cpp:1351
#: pcbnew/pcb_io/altium/altium_pcb.cpp:1428
#: pcbnew/pcb_io/altium/altium_pcb.cpp:1506
#: pcbnew/pcb_io/altium/altium_pcb.cpp:1530
#, c-format
msgid ""
"Dimension found on an Altium layer (%d) with no KiCad equivalent. It has "
"been moved to KiCad layer Eco1_User."
msgstr ""
"Altium 레이어 (%d) 에서 KiCad에 대응되지 않는 치수를 발견하였습니다. KiCad 레"
"이어 Eco1_User로 이동되었습니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:1552
msgid "Loading dimension drawings..."
msgstr "치수 도면 로드 중..."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:1573
#: pcbnew/pcb_io/altium/altium_pcb.cpp:1580
#, c-format
msgid "Ignored dimension of kind %d (not yet supported)."
msgstr "%d 종류의 치수를 무시하였습니다 (아직 지원되지 않음)."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:1621
msgid "No 3D-models will be imported."
msgstr "3D 모델을 가져오지 않았습니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:1650
#, c-format
msgid "File not found: '%s'. 3D-model not imported."
msgstr "파일을 찾을 수 없음: '%s'. 3D 모델을 가져올 수 없습니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:1688
msgid "Loading nets..."
msgstr "네트 불러오는 중..."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:1712
#: pcbnew/pcb_io/altium/altium_pcb.cpp:1946
msgid "Loading polygons..."
msgstr "다각형을 불러오는 중..."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:1858
msgid "Loading rules..."
msgstr "규칙 불러오는 중..."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:1926
msgid "Loading board regions..."
msgstr "기판 영역 불러오는 중..."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:2027
#: pcbnew/pcb_io/altium/altium_pcb.cpp:2138
#, fuzzy, c-format
msgid ""
"Dashed outline found on an Altium layer (%d) with no KiCad equivalent. It "
"has been moved to KiCad layer Eco1_User."
msgstr ""
"Altium 레이어 (%d) 에서 KiCad에 대응되지 않는 영역을 발견하였습니다. KiCad 레"
"이어 Eco1_User로 이동되었습니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:2068
#: pcbnew/pcb_io/altium/altium_pcb.cpp:2171
#, c-format
msgid "Ignored polygon shape of kind %d (not yet supported)."
msgstr "%d 종류의 다각형 형상이 무시되었습니다 (아직 지원되지 않음)."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:2323
msgid "Loading zone fills..."
msgstr "영역 채우기 불러오는 중..."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:2398
msgid "Loading arcs..."
msgstr "호 불러오는 중..."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:2641
msgid "Loading pads..."
msgstr "패드 불러오는 중..."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:2724
#, c-format
msgid "Footprint %s pad %s is not marked as multilayer, but is a TH pad."
msgstr ""
"풋프린트 %s 패드 %s은(는) 다중 레이어로 마크되지 않았으나, TH 패드입니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:2745
#, c-format
msgid "Footprint %s pad %s has a square hole (not yet supported)."
msgstr "풋프린트 %s 패드 %s에 사각형 홀이 존재합니다 (아직 지원되지 않음)."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:2772
#, c-format
msgid ""
"Footprint %s pad %s has a hole-rotation of %f degrees. KiCad only supports "
"90 degree rotations."
msgstr ""
"풋프린트 %s 패드 %s은(는) %f도로 회전된 홀이 존재합니다. KiCad는 90도 회전만"
"을 지원합니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:2784
#, c-format
msgid "Footprint %s pad %s uses a hole of unknown kind %d."
msgstr "풋프린트 %s 패드 %s은(는) 알 수 없는 종류 %d 홀을 사용합니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:2801
#, c-format
msgid "Footprint %s pad %s uses a complex pad stack (not yet supported.)"
msgstr ""
"풋프린트 %s 패드 %s은(는) 복잡한 패드 스택을 사용합니다 (아직 지원되지 않음)"

#: pcbnew/pcb_io/altium/altium_pcb.cpp:2838
#, c-format
msgid "Footprint %s pad %s uses an unknown pad-shape."
msgstr "풋프린트 %s 패드 %s은(는) 알 수 없는 패드 형태를 사용합니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:2896
#: pcbnew/pcb_io/altium/altium_pcb.cpp:2917
#, c-format
msgid ""
"Non-copper pad %s found on an Altium layer (%d) with no KiCad equivalent. It "
"has been moved to KiCad layer Eco1_User."
msgstr ""
"KiCad에 대응되지 않는 비 구리 패드 %s을(를) Altium 레이어 (%d) 에서 발견하였"
"습니다. KiCad 레이어 Eco1_User로 이동되었습니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:2936
#, c-format
msgid "Non-copper pad %s is connected to a net, which is not supported."
msgstr ""
"비 구리 패드 %s이(가) 네트에 연결되었습니다. 이는 아직 지원되지 않습니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:2942
#, c-format
msgid "Non-copper pad %s has a hole, which is not supported."
msgstr "비 구리 패드 %s에 홀이 존재합니다. 이는 아직 지원되지 않습니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:2947
#, c-format
msgid "Non-copper pad %s has a complex pad stack (not yet supported)."
msgstr "비 구리 패드 %s에 복잡한 패드 스택을 사용합니다 (아직 지원되지 않음)."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:3089
#, c-format
msgid "Non-copper pad %s uses an unknown pad-shape."
msgstr "비 구리 패드 %s은(는) 알 수 없는 패드 형태를 사용합니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:3099
msgid "Loading vias..."
msgstr "비아 불러오는 중..."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:3140
#, c-format
msgid ""
"Via from layer %d to %d uses a non-copper layer, which is not supported."
msgstr ""
"레이어 %d에서 %d에 해당하는 비아는 비 구리 레이어를 사용합니다. 이는 아직 지"
"원되지 않습니다."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:3159
msgid "Loading tracks..."
msgstr "배선 불러오는 중..."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:3367
msgid "Loading unicode strings..."
msgstr "유니코드 문자열 로드 중..."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:3381
msgid "Loading text..."
msgstr "텍스트 불러오는 중..."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:3410
#: pcbnew/pcb_io/altium/altium_pcb.cpp:3423
#, c-format
msgid "Ignored barcode on Altium layer %d (not yet supported)."
msgstr "Altium 레이어 %d의 바코드를 무시하였습니다 (아직 지원되지 않음)."

#: pcbnew/pcb_io/altium/altium_pcb.cpp:3529
msgid "Loading rectangles..."
msgstr "직사각형 불러오는 중..."

#: pcbnew/pcb_io/altium/pcb_io_altium_circuit_maker.h:37
msgid "Altium Circuit Maker PCB files"
msgstr "알티움 서킷 메이커 PCB 파일"

#: pcbnew/pcb_io/altium/pcb_io_altium_circuit_studio.h:36
msgid "Altium Circuit Studio PCB files"
msgstr "알티움 서킷 스튜디오 PCB 파일"

#: pcbnew/pcb_io/altium/pcb_io_altium_designer.cpp:269
msgid "No footprints in library"
msgstr "라이브러리에 풋프린트 없음"

#: pcbnew/pcb_io/altium/pcb_io_altium_designer.h:42
msgid "Altium Designer PCB files"
msgstr "알티움 디자이너 PCB 파일"

#: pcbnew/pcb_io/altium/pcb_io_altium_designer.h:47
msgid "Altium PCB Library or Integrated Library"
msgstr "Altium PCB 라이브러리 또는 통합 라이브러리"

#: pcbnew/pcb_io/altium/pcb_io_solidworks.h:31
msgid "Solidworks PCB files"
msgstr "솔리드웍스 PCB 파일"

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:91
msgid ""
"The selected file indicates that nets might be out of synchronisation with "
"the schematic. It is recommended that you carry out an 'Align Nets' "
"procedure in CADSTAR and re-import, to avoid inconsistencies between the PCB "
"and the schematic. "
msgstr ""
"선택한 파일은 네트가 회로도와 동기화되지 않았을 수도 있음을 나타내고 있습니"
"다. PCB와 회로도 사이의 불일치를 피하기 위해 사용자가 직접 CADSTAR에서 '네트 "
"정렬' 을 수행하고 다시 가져올 것을 권장합니다. "

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:131
#, c-format
msgid ""
"Unable to determine zone fill priorities for layer '%s'. A best attempt has "
"been made but it is possible that DRC errors exist and that manual editing "
"of the zone priorities is required."
msgstr ""
"레이어 '%s'에 대한 영역 채우기 우선 순위를 결정할 수 없습니다. 최선의 시도가 "
"이루어졌지만 DRC 오류가 존재할 수 있으며 영역 우선 순위를 수동으로 편집해야 "
"합니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:145
msgid ""
"The CADSTAR design contains Trunk routing elements, which have no KiCad "
"equivalent. These elements were not loaded."
msgstr ""
"CADSTAR 디자인에 KiCad에서 대응되지 않는 트렁크 라우팅 요소가 포함되어 있습니"
"다. 이 요소들은 불러와지지 않습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:152
#, c-format
msgid ""
"The CADSTAR design contains variants which has no KiCad equivalent. Only the "
"variant '%s' was loaded."
msgstr ""
"CADSTAR 디자인에 KiCad에서 대응되지 않는 변형이 포함되어 있습니다. 변형 "
"'%s'만 불러옵니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:164
msgid ""
"CADSTAR fonts are different to the ones in KiCad. This will likely result in "
"alignment issues that may cause DRC errors. Please review the imported text "
"elements carefully and correct manually if required."
msgstr ""
"CADSTAR 글꼴은 KiCad의 글꼴과 다릅니다.이로 인해 DRC에 잘못된 정렬 문제가 발"
"생할 수 있습니다.가져온 텍스트 요소를주의 깊게 검토하고 필요한 경우 수동으로 "
"수정하십시오."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:240
#, c-format
msgid ""
"The CADSTAR layer '%s' has no KiCad equivalent. All elements on this layer "
"have been mapped to KiCad layer '%s' instead."
msgstr ""
"CADSTAR 레이어 '%s'은(는) KiCad에서 대응되지 않습니다. 해당 레이어 위의 요소"
"들은 KiCad 레이어 '%s'에 대신 매핑됩니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:253
#, c-format
msgid ""
"The CADSTAR layer '%s' has been assumed to be a technical layer. All "
"elements on this layer have been mapped to KiCad layer '%s'."
msgstr ""
"CADSTAR 레이어 '%s'은(는) 기술 레이어로 간주됩니다. 해당 레이어 위의 요소들"
"은 KiCad 레이어 '%s'에 대신 매핑됩니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:325
#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:349
#, c-format
msgid ""
"The CADSTAR construction layer '%s' is on the outer surface of the board. It "
"has been ignored."
msgstr "CADSTAR 구성 레이어 '%s'는 보드의 외부 표면에 있어 무시되었습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:588
#, c-format
msgid "Unexpected layer '%s' in layer stack."
msgstr "레이어 스택에 예기치 않은 레이어 '%s'이(가) 있습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:745
#, c-format
msgid "Design rule %s was not found. This was ignored."
msgstr "디자인 규칙 %s을(를) 찾을 수 없습니다. 이는 무시되었습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:775
msgid ""
"KiCad design rules are different from CADSTAR ones. Only the compatible "
"design rules were imported. It is recommended that you review the design "
"rules that have been applied."
msgstr ""
"KiCad 디자인 규칙은 CADSTAR의 규칙과 차이가 있습니다. 호환되는 디자인 규칙만"
"이 가져와집니다. 적용된 디자인 규칙을 검토하는 것을 권장합니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:866
#, c-format
msgid ""
"Footprint definition '%s' has component copper associated to a pad on "
"multiple layers. Custom padstacks are not supported in KiCad. The copper "
"items have been imported as graphical elements."
msgstr ""
"풋프린트 정의 '%s'에 여러 레이어에 있는 패드에 연결된 컴포넌트 구리가 있습니"
"다. 사용자 정의 패드 스택은 KiCad에서 지원되지 않습니다. 구리 항목은 그래픽 "
"요소로 가져왔습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:997
#, c-format
msgid ""
"The CADSTAR area '%s' in library component '%s' does not have a KiCad "
"equivalent. The area is neither a via nor route keepout area. The area was "
"not imported."
msgstr ""
"CADSTAR 영역 '%s' (라이브러리 컴포넌트 '%s' 에 있음) 은 KiCad에서 대응되지 않"
"습니다. 비아 영역도, 라우트 금지 영역도 아닙니다. 영역은 불러와지지 않습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1083
#, c-format
msgid ""
"The CADSTAR pad definition '%s' is a complex pad stack, which is not "
"supported in KiCad. Please review the imported pads as they may require "
"manual correction."
msgstr ""
"CADSTAR 패드 정의 '%s'은(는) 복잡한 패드 스택으로, KiCad에서 지원하지 않습니"
"다. 수동으로 수정해 주어야 할 가능성이 있으므로 가져온 패드들을 검토하세요."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1301
#, c-format
msgid ""
"The CADSTAR pad definition '%s' has the hole shape outside the pad shape. "
"The hole has been moved to the center of the pad."
msgstr ""
"CADSTAR 패드 정의 '%s'은(는) 패드 형상 바깥에 홀 형상이 존재합니다. 홀은 패드"
"의 정중앙으로 이동되었습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1331
#, c-format
msgid "The CADSTAR pad definition '%s' has import errors: %s"
msgstr "CADSTAR 패드 정의 '%s' 불러오기 오류가 발생하였습니다: %s"

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1351
#, c-format
msgid "Unable to find pad index '%d' in footprint '%s'."
msgstr "패드 인덱스 '%d'를 풋프린트 '%s'에서 찾을 수 없습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1384
#, c-format
msgid "Unable to find group ID %s in the group definitions."
msgstr "그룹 ID %s을(를) 그룹 정의에서 찾을 수 없습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1390
#, c-format
msgid ""
"Unable to find sub group %s in the group map (parent group ID=%s, Name=%s)."
msgstr ""
"그룹 맵에서 서브 그룹 %s을(를) 찾을 수 없습니다 (상위 그룹 ID=%s, 이름=%s)."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1472
#, c-format
msgid ""
"Dimension ID %s is an angled dimension, which has no KiCad equivalent. An "
"aligned dimension was loaded instead."
msgstr ""
"치수 ID %s은(는) 각이 있는 치수로, KiCad에서 대응되지 않습니다. 정렬된 치수"
"를 대신 불러옵니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1483
#, c-format
msgid ""
"Dimension ID %s has 'External' style in CADSTAR. External dimension styles "
"are not yet supported in KiCad. The dimension object was imported with an "
"internal dimension style instead."
msgstr ""
"치수 ID %s은(는) CADSTAR에서 '외부' 스타일을 포함합니다. 외부 치수 스타일은 "
"KiCad에서 지원하지 않습니다. 치수 객체는 내부 치수 스타일로 불러옵니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1540
#, c-format
msgid "Unexpected Dimension type (ID %s). This was not imported."
msgstr "예기치 않은 치수 유형 (ID %s). 이는 불러와지지 않습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1675
#, c-format
msgid ""
"Dimension %s is an angular dimension which has no KiCad equivalent. The "
"object was not imported."
msgstr ""
"치수 %s은(는) 각이 있는 치수로, KiCad에서 대응되지 않습니다. 이 객체는 불러와"
"지지 않습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1715
#, c-format
msgid ""
"The CADSTAR area '%s' is marked as a placement area in CADSTAR. Placement "
"areas are not supported in KiCad. Only the supported elements for the area "
"were imported."
msgstr ""
"CADSTAR 영역 '%s'은(는) CADSTAR에서 배치 영역으로 표시됩니다. 배치 영역은 "
"KiCad에서 아직 지원하지 않습니다. 영역 내에서 지원되는 원소만 불러옵니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1724
#, c-format
msgid ""
"The CADSTAR area '%s' does not have a KiCad equivalent. Pure Placement areas "
"are not supported."
msgstr ""
"CADSTAR 영역 '%s'은(는) KiCad에서 대응되지 않습니다. 순수 배치 영역은 지원되"
"지 않습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1751
#, c-format
msgid "Unable to find component '%s' in the library(Symdef ID: '%s')"
msgstr "라이브러리에서 컴포넌트 '%s'을(를) 찾을 수 없습니다 (Symdef ID: '%s')"

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1875
#, c-format
msgid "Unable to find documentation symbol in the library (Symdef ID: '%s')"
msgstr "라이브러리에서 문서 심볼을 찾을 수 없습니다 (Symdef ID: '%s')"

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1944
#, c-format
msgid ""
"The CADSTAR template '%s' has the setting 'Allow in No Routing Areas' "
"enabled. This setting has no KiCad equivalent, so it has been ignored."
msgstr ""
"CADSTAR 템플릿 '%s'에 'Allow in No Routing Areas' 설정이 활성화되어 있습니"
"다. 이 설정은 KiCad에 해당하는 설정이 없으므로 무시되었습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1952
#, c-format
msgid ""
"The CADSTAR template '%s' has the setting 'Box Isolated Pins' enabled. This "
"setting has no KiCad equivalent, so it has been ignored."
msgstr ""
"CADSTAR 템플릿 '%s'에 'Box Isolated Pins' 설정이 활성화되어 있습니다. 이 설정"
"은 KiCad에 해당하는 설정이 없으므로 무시되었습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1960
#, c-format
msgid ""
"The CADSTAR template '%s' has the setting 'Automatic Repour' enabled. This "
"setting has no KiCad equivalent, so it has been ignored."
msgstr ""
"CADSTAR 템플릿 '%s'에 'Automatic Repour' 설정이 활성화되어 있습니다. 이 설정"
"은 KiCad에 해당하는 설정이 없으므로 무시되었습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1971
#, c-format
msgid ""
"The CADSTAR template '%s' has a non-zero value defined for the 'Sliver "
"Width' setting. There is no KiCad equivalent for this, so this setting was "
"ignored."
msgstr ""
"CADSTAR 템플릿 '%s'에 'Sliver Width'설정에 0이 아닌 값이 정의되어 있습니다. "
"이 설정은 KiCad에 해당하는 설정이 없으므로 무시되었습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:1981
#, c-format
msgid ""
"The CADSTAR template '%s' has different settings for 'Retain Poured Copper - "
"Disjoint' and 'Retain Poured Copper - Isolated'. KiCad does not distinguish "
"between these two settings. The setting for disjoint copper has been applied "
"as the minimum island area of the KiCad Zone."
msgstr ""
"CADSTAR 템플릿 '%s' 에는 서로 다른 설정 'Retain Poured Copper - Disjoint'와 "
"'Retain Poured Copper - Isolated'이 존재합니다. KiCad에선 해당 두 설정을 구분"
"하지 않습니다. 분리된 구리의 설정은 KiCad 영역의 최소 고립 영역 면적으로 적용"
"됩니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:2032
#, c-format
msgid ""
"The CADSTAR template '%s' has different settings for thermal relief in pads "
"and vias. KiCad only supports one single setting for both. The setting for "
"pads has been applied."
msgstr ""
"CADSTAR 템플릿 '%s'에는 패드와 비아의 단열판에 대한 설정이 서로 다릅니다. "
"KiCad는 패드와 비아에 공통된 하나의 설정만 지원합니다. 패드에 대한 설정이 적"
"용되었습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:2049
#, c-format
msgid ""
"The CADSTAR template '%s' has thermal reliefs in the original design but the "
"spoke width (%.2f mm) is thinner than the minimum thickness of the zone "
"(%.2f mm). KiCad requires the minimum thickness of the zone to be preserved. "
"Therefore the minimum thickness has been applied as the new spoke width and "
"will be applied next time the zones are filled."
msgstr ""
"CADSTAR 템플릿 '%s'는 원래 디자인에 열 릴리프가 있지만 스포크 너비(%.2f mm)"
"가 영역의 최소 두께(%.2f mm)보다 얇습니다. KiCad는 영역의 최소 두께를 유지해"
"야 합니다. 따라서 최소 두께가 새 스포크 너비로 적용되었으며 다음에 구역이 채"
"워질 때 적용됩니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:2096
#, c-format
msgid ""
"The CADSTAR layer '%s' is defined as a power plane layer. However no net "
"with such name exists. The layer has been loaded but no copper zone was "
"created."
msgstr ""
"CADSTAR 레이어 '%s'은(는) 전원면으로 정의되어 있습니다. 허나 해당 이름을 가"
"진 네트가 존재하지 않습니다. 레이어는 불러와지지만 구리 영역은 생성되지 않습"
"니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:2198
msgid ""
"The CADSTAR design contains COPPER elements, which have no direct KiCad "
"equivalent. These have been imported as a KiCad Zone if solid or hatch "
"filled, or as a KiCad Track if the shape was an unfilled outline (open or "
"closed)."
msgstr ""
"CADSTAR 디자인에는 직접적인 KiCad와 동등한 것이 없는 COPPER 요소가 포함되어 "
"있습니다. 솔리드 또는 해치가 채워진 경우 KiCad 영역으로 가져왔고, 모양이 채워"
"지지 않은 윤곽선(열린 또는 닫힌)인 경우 KiCad 트랙으로 가져왔습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:2301
#, c-format
msgid ""
"The net '%s' references component ID '%s' which does not exist. This has "
"been ignored."
msgstr ""
"네트 '%s'은(는) 컴포넌트 ID '%s'을(를) 참조하지만, 이는 존재하지 않습니다. 따"
"라서 무시됩니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:2307
#, c-format
msgid ""
"The net '%s' references non-existent pad index '%d' in component '%s'. This "
"has been ignored."
msgstr ""
"네트 '%s'은(는) 존재하지 않는 패드 번호 '%d'을(를) 참조합니다 (컴포넌트 "
"'%s'에서). 따라서 무시됩니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:2473
msgid "Text Variables could not be set as there is no project loaded."
msgstr "불러온 프로젝트가 없기 때문에 텍스트 변수를 설정할 수 없습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:2558
msgid ""
"The CADSTAR design contains teardrops. This importer does not yet support "
"them, so the teardrops in the design have been ignored."
msgstr ""
"CADSTAR 디자인에는 티어드롭이 포함되어 있습니다. 이 importer는 아직 그들을 지"
"원하지 않으므로 디자인의 티어드롭은 무시되었습니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:2589
#, c-format
msgid ""
"The CADSTAR via code '%s' has different shape from a circle defined. KiCad "
"only supports circular vias so this via type has been changed to be a via "
"with circular shape of %.2f mm diameter."
msgstr ""
"CADSTAR 비아 코드 '%s'은(는) 정의된 원형과 다른 도형입니다. KiCad는 원형 비아"
"만을 지원하며, 따라서 해당 비아 유형은 직경 %.2f mm의 원형 비아로 변경되었습"
"니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:2799
#, c-format
msgid ""
"The shape for '%s' is Hatch filled in CADSTAR, which has no KiCad "
"equivalent. Using solid fill instead."
msgstr ""
"'%s'은(는) 해치로 채워진 CADSTAR 형상으로, KiCad에 해당하는 형상이 없습니다. "
"대신 솔리드 채우기를 사용합니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:3613
#, c-format
msgid ""
"The CADSTAR Hatching code '%s' has %d hatches defined. KiCad only supports 2 "
"hatches (crosshatching) 90 degrees apart. The imported hatching is "
"crosshatched."
msgstr ""
"CADSTAR 해칭 코드 '%s'은(는) %d 개의 해치가 정의되어 있습니다. KiCad는 단 2개"
"만의 90도 떨어져 있는 해치를 지원합니다 (크로스해칭). 불러온 해칭은 크로스해"
"치로 변환됩니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:3623
#, c-format
msgid ""
"The CADSTAR Hatching code '%s' has different line widths for each hatch. "
"KiCad only supports one width for the hatching. The imported hatching uses "
"the width defined in the first hatch definition, i.e. %.2f mm."
msgstr ""
"CADSTAR 해칭 코드 '%s'은(는) 각 해치별로 다른 선 굵기를 가집니다. KiCad는 해"
"칭에 대해 하나의 폭만을 지원합니다. 불러온 해칭은 첫 번째 해치에 정의된 폭을 "
"사용합니다 (예: %.2fmm)."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:3635
#, c-format
msgid ""
"The CADSTAR Hatching code '%s' has different step sizes for each hatch. "
"KiCad only supports one step size for the hatching. The imported hatching "
"uses the step size defined in the first hatching definition, i.e. %.2f mm."
msgstr ""
"CADSTAR 해칭 코드 '%s'은(는) 각 해치별로 다른 스텝 크기를 가집니다. KiCad는 "
"해칭에 대해 하나의 스텝 크기를 지원합니다. 불러와진 해칭은 첫 번째 해치에 정"
"의된 스텝 크기를 사용합니다 (예: %.2fmm)."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:3648
#, c-format
msgid ""
"The hatches in CADSTAR Hatching code '%s' have an angle  difference of %.1f "
"degrees. KiCad only supports hatching 90 degrees apart.  The imported "
"hatching has two hatches 90 degrees apart, oriented %.1f degrees from "
"horizontal."
msgstr ""
"CADSTAR 해칭 코드 '%s'은(는) 각 해치별로 %.1f도의 각도 차이를 가집니다. KiCad"
"는 해칭에 대해 90도 차이만을 지원합니다. 불러와진 해칭은 수평으로 %.1f도 방향"
"으로 90도 떨어져 있는 2개의 해치가 됩니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:3718
#, c-format
msgid ""
"Dimension ID %s uses a type of unit that is not supported in KiCad. "
"Millimeters were applied instead."
msgstr ""
"치수 ID %s은(는) KiCad에서 지원하지 않는 단위 유형을 사용합니다. 밀리미터가 "
"대신 적용됩니다."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:4003
msgid ""
"The CADSTAR design contains nets with a 'Net Class' assigned. KiCad does not "
"have an equivalent to CADSTAR's Net Class so these elements were not "
"imported. Note: KiCad's version of 'Net Class' is closer to CADSTAR's 'Net "
"Route Code' (which has been imported for all nets)."
msgstr ""
"CADSTAR 디자인은 '네트 클래스' 가 할당된 네트를 포함합니다. KiCad는 CADSTAR"
"의 네트 클래스와 호환되는 클래스를 갖고 있지 않기 때문에, 해당 요소들은 가져"
"올 수 없습니다. 참고: KiCad의 '네트 클래스' 버전은 CADSTAR의 '네트 라우터 코"
"드' 와 더 비슷합니다 (모든 네트에 대해 가져오기 된)."

#: pcbnew/pcb_io/cadstar/cadstar_pcb_archive_loader.cpp:4013
msgid ""
"The CADSTAR design contains nets with a 'Spacing Class' assigned. KiCad does "
"not have an equivalent to CADSTAR's Spacing Class so these elements were not "
"imported. Please review the design rules as copper pours will affected by "
"this."
msgstr ""
"CADSTAR 디자인에는 '간격 클래스' 가 할당된 네트가 포함되어 있습니다. KiCad는 "
"CADSTAR의 간격 클래스에 대응하지 않으므로, 이 요소들은 불러와지지 않습니다. "
"구리 주입 시에 영향이 갈 수 있으니 디자인 규칙을 검토하세요."

#: pcbnew/pcb_io/cadstar/pcb_io_cadstar_archive.h:37
msgid "CADSTAR PCB Archive files"
msgstr "CADSTAR PCB 보관 파일"

#: pcbnew/pcb_io/eagle/pcb_io_eagle.cpp:358
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:198
#, c-format
msgid "Unable to read file '%s'"
msgstr "파일을 읽을 수 없음 '%s'"

#: pcbnew/pcb_io/eagle/pcb_io_eagle.cpp:1137
#, c-format
msgid "<package> '%s' duplicated in <library> '%s'"
msgstr "<패키지> '%s'이(가) <라이브러리> '%s'에 복제됨"

#: pcbnew/pcb_io/eagle/pcb_io_eagle.cpp:1214
#, c-format
msgid "No '%s' package in library '%s'."
msgstr "'%s' 패키지가 라이브러리 '%s'에 없습니다."

#: pcbnew/pcb_io/eagle/pcb_io_eagle.cpp:1447
#: pcbnew/pcb_io/eagle/pcb_io_eagle.cpp:2266
#, c-format
msgid "Ignoring a polygon since Eagle layer '%s' (%d) was not mapped"
msgstr ""
"Eagle 레이어 '%s' (%d) 이(가) 매핑되지 않았기 때문에 다각형을 무시합니다"

#: pcbnew/pcb_io/eagle/pcb_io_eagle.cpp:1531
#, c-format
msgid "Skipping a polygon on layer '%s' (%d): outline count is not 1"
msgstr "레이어 '%s'(%d)에서 다각형 무시: 윤곽선 개수가 1이 아님"

#: pcbnew/pcb_io/eagle/pcb_io_eagle.cpp:1822
#, c-format
msgid "Ignoring a wire since Eagle layer '%s' (%d) was not mapped"
msgstr ""
"Eagle 레이어 '%s' (%d) 이(가) 매핑되지 않았기 때문에 와이어를 무시합니다"

#: pcbnew/pcb_io/eagle/pcb_io_eagle.cpp:1987
#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:2423
#: pcbnew/pcb_io/geda/pcb_io_geda.cpp:579
#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:1577
#, c-format
msgid ""
"Invalid zero-sized pad ignored in\n"
"file: %s"
msgstr ""
"잘못된 제로 사이즈 패드 무시됨\n"
"파일: %s"

#: pcbnew/pcb_io/eagle/pcb_io_eagle.cpp:1999
#, c-format
msgid "Ignoring a text since Eagle layer '%s' (%d) was not mapped"
msgstr ""
"Eagle 레이어 '%s' (%d) 이(가) 매핑되지 않았기 때문에 텍스트를 무시합니다"

#: pcbnew/pcb_io/eagle/pcb_io_eagle.cpp:2149
#, c-format
msgid "Ignoring a rectangle since Eagle layer '%s' (%d) was not mapped"
msgstr ""
"Eagle 레이어 '%s' (%d) 이(가) 매핑되지 않았기 때문에 사각형을 무시합니다"

#: pcbnew/pcb_io/eagle/pcb_io_eagle.cpp:2342
#, c-format
msgid "Ignoring a circle since Eagle layer '%s' (%d) was not mapped"
msgstr "Eagle 레이어 '%s' (%d) 이(가) 매핑되지 않았기 때문에 원을 무시합니다"

#: pcbnew/pcb_io/eagle/pcb_io_eagle.h:136
#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.h:71
msgid "Eagle ver. 6.x XML PCB files"
msgstr "Eagle 버전 6.x XML PCB 파일"

#: pcbnew/pcb_io/eagle/pcb_io_eagle.h:141
msgid "Eagle ver. 6.x XML library files"
msgstr "Eagle 버전 6.x XML 라이브러리 파일"

#: pcbnew/pcb_io/easyeda/pcb_io_easyeda_parser.cpp:783
#, c-format
msgid "Unknown SVGNODE nodeType %d"
msgstr "알 수 없는 SVGNODE 노드 타입 %d"

#: pcbnew/pcb_io/easyeda/pcb_io_easyeda_plugin.cpp:166
#, c-format
msgid "Unable to find a valid board in '%s'"
msgstr "'%s'에서 올바른 보드를 찾을 수 없음"

#: pcbnew/pcb_io/easyeda/pcb_io_easyeda_plugin.cpp:264
#: pcbnew/pcb_io/easyeda/pcb_io_easyeda_plugin.cpp:269
#, c-format
msgid "Error loading board '%s': %s"
msgstr "보드 '%s' 로드 오류: %s"

#: pcbnew/pcb_io/easyeda/pcb_io_easyeda_plugin.cpp:294
#: pcbnew/pcb_io/easyeda/pcb_io_easyeda_plugin.cpp:387
#, c-format
msgid "Unable to find valid footprints in '%s'"
msgstr "'%s'에서 유효한 풋프린트를 찾을 수 없음"

#: pcbnew/pcb_io/easyeda/pcb_io_easyeda_plugin.cpp:360
#: pcbnew/pcb_io/easyeda/pcb_io_easyeda_plugin.cpp:365
#, c-format
msgid "Error enumerating footprints in library '%s': %s"
msgstr "라이브러리 '%s'에서 풋프린트를 열거하는 중 오류 발생: %s"

#: pcbnew/pcb_io/easyeda/pcb_io_easyeda_plugin.cpp:512
#: pcbnew/pcb_io/easyeda/pcb_io_easyeda_plugin.cpp:517
#, c-format
msgid "Error reading footprint '%s' from library '%s': %s"
msgstr "풋프린트 '%s'를 라이브러리 '%s': %s에서 읽는 중 오류 발생"

#: pcbnew/pcb_io/easyedapro/pcb_io_easyedapro.cpp:342
#: pcbnew/pcb_io/easyedapro/pcb_io_easyedapro.cpp:398
#, fuzzy, c-format
msgid "Cannot load footprint '%s' from '%s'"
msgstr "풋프린트 '%s'을(를) '%s'에서 불러올 수 없습니다"

#: pcbnew/pcb_io/easyedapro/pcb_io_easyedapro.cpp:380
#, c-format
msgid "Footprint '%s' not found in project '%s'"
msgstr "풋프린트 '%s'를 라이브러리 '%s'에서 찾을 수 없음"

#: pcbnew/pcb_io/easyedapro/pcb_io_easyedapro.h:40
#: pcbnew/pcb_io/easyedapro/pcb_io_easyedapro.h:45
msgid "EasyEDA (JLCEDA) Pro project"
msgstr "EasyEDA(JLCEDA) Pro 프로젝트"

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:249
#, c-format
msgid "Unknown FABMASTER section %s:%s at row %zu."
msgstr "알 수 없는 FABMASTER 섹션 %s: %s이(가) 행 %zu에 있습니다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:266
#, c-format
msgid "Invalid row size in J row %zu. Expecting 11 elements but found %zu."
msgstr ""
"유효하지 않은 행 크기가 J 행 %zu에 있습니다. 11개의 원소가 필요하지만, %zu개"
"가 발견되었습니다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:289
msgid "Could not find units value, defaulting to mils."
msgstr "단위 값을 찾을 수 없습니다. 기본값인 mils로 대체됩니다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:313
#, c-format
msgid "Could not find column label %s."
msgstr "열 라벨 %s을(를) 찾을 수 없습니다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:357
#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:440
#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:680
#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:831
#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:918
#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:1226
#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:1351
#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:1587
#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:1666
#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:1733
#, c-format
msgid "Invalid row size in row %zu. Expecting %zu elements but found %zu."
msgstr ""
"유효하지 않은 행 크기가 행 %zu에 있습니다. %zu개의 원소가 필요하지, %zu개가 "
"발견되었습니다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:492
#, c-format
msgid "Expecting drill size value but found %s!%s!%s in row %zu."
msgstr "드릴 크기 값을 예상했으나, %s!%s!%s이(가) 행 %zu에서 발견되었습니다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:540
#, c-format
msgid "Expecting pad size values but found %s : %s in row %zu."
msgstr ""
"패드 크기 값을 예상했으나, %s이(가) 발견되었습니다 : %s은(는) 행 %zu에 있습니"
"다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:562
#, c-format
msgid "Invalid pad size in row %zu."
msgstr "행 %zu의 패드 크기가 유효하지 않습니다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:597
#, c-format
msgid "Expecting pad offset values but found %s:%s in row %zu."
msgstr ""
"패드 오프셋 값을 예상했으나, %s이(가) 발견되었습니다 : %s은(는) 행 %zu에 있습"
"니다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:642
#, c-format
msgid "Unknown pad shape name '%s' on layer '%s' in row %zu."
msgstr ""
"알 수 없는 패드 형상 이름 '%s'이(가) 레이어 '%s', 행 %zu에서 발견되었습니다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:964
#, c-format
msgid "Invalid format for id string '%s' in custom pad row %zu."
msgstr ""
"id 문자열 '%s'에 대해 유효하지 않은 유형이 사용자 정의 패드 행 %zu에서 발견되"
"었습니다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:1005
#, c-format
msgid "Could not insert graphical item %d into padstack '%s'."
msgstr "그래픽 개체 %d을(를) 패드스택 '%s'에 삽입할 수 없습니다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:1012
#, c-format
msgid "Unrecognized pad shape primitive '%s' in row %zu."
msgstr "인식할 수 없는 패드 모양 기본 요소 '%s'이(가) %zu 행에 있습니다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:1123
#, c-format
msgid "Invalid token count. Expected 8 but found %zu."
msgstr "토큰 개수가 잘못되었습니다. 8개가 필요하지만, %zu개를 찾았습니다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:1258
#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:1447
#, c-format
msgid "Invalid format for record_tag string '%s' in row %zu."
msgstr ""
"record_tag 문자열 '%s' 에 대해 유효하지 않은 유형이 행 %zu에서 발견되었습니"
"다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:1418
#, c-format
msgid "Invalid row size in row %zu.  Expecting %zu elements but found %zu."
msgstr ""
"행 %zu의 행 크기가 잘못되었습니다.  %zu 개의 원소가 필요하지만, %zu개가 발견"
"되었습니다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:1457
#, c-format
msgid "Unhandled graphic item '%s' in row %zu."
msgstr "처리되지 않은 그래픽 개체 '%s'이(가) 행 %zu에서 발견되었습니다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:1488
#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:1503
#, c-format
msgid "Duplicate item for ID %d and sequence %d in row %zu."
msgstr "ID %d와 시퀀스 %d에 대해 중복된 개체가 행 %zu에서 발견되었습니다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:2266
#, c-format
msgid "Unable to locate padstack %s in file %s\n"
msgstr "%s 파일에서 %s 패드 스택을 찾을 수 없습니다.\n"

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:2337
#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:2366
#, c-format
msgid "Invalid custom pad '%s'. Replacing with circular pad."
msgstr "유효하지 않은 사용자 정의 패드 '%s'입니다. 원형 패드로 교체됩니다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:2374
#, c-format
msgid "Could not find custom pad '%s'."
msgstr "사용자 정의 패드 '%s'을(를) 찾을 수 없습니다."

#: pcbnew/pcb_io/fabmaster/import_fabmaster.cpp:2621
#, c-format
msgid "Expecting etch data to be on copper layer. Row found on layer '%s'"
msgstr ""
"구리 레이어 위에 에칭 데이터가 필요합니다. 레이어 '%s'에서 행이 발견되었습니"
"다"

#: pcbnew/pcb_io/fabmaster/pcb_io_fabmaster.cpp:69
msgid "Could not read file "
msgstr "파일을 읽을 수 없음 "

#: pcbnew/pcb_io/fabmaster/pcb_io_fabmaster.h:38
msgid "Fabmaster PCB files"
msgstr "Fabmaster PCB 파일"

#: pcbnew/pcb_io/geda/pcb_io_geda.cpp:92
#, c-format
msgid "Cannot convert '%s' to an integer."
msgstr "'%s'을(를) 정수형으로 변환할 수 없습니다."

#: pcbnew/pcb_io/geda/pcb_io_geda.cpp:228
#: pcbnew/pcb_io/geda/pcb_io_geda.cpp:874
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:167
#, c-format
msgid "Footprint library '%s' not found."
msgstr "풋프린트 라이브러리 '%s'을(를) 찾을 수 없습니다."

#: pcbnew/pcb_io/geda/pcb_io_geda.cpp:282
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:228
#, c-format
msgid "Library '%s' has no footprint '%s'."
msgstr "라이브러리 '%s'에 '%s' 풋프린트가 없음."

#: pcbnew/pcb_io/geda/pcb_io_geda.cpp:347
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:854
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:1062
#, c-format
msgid "Unknown token '%s'"
msgstr "알 수 없는 토큰 '%s'"

#: pcbnew/pcb_io/geda/pcb_io_geda.cpp:354
#, c-format
msgid "Element token contains %d parameters."
msgstr "원소 토큰이 %d개의 매개변수를 포함하고 있습니다."

#: pcbnew/pcb_io/geda/pcb_io_geda.cpp:979
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:2782
#, c-format
msgid "Insufficient permissions to delete folder '%s'."
msgstr "'%s' 폴더를 삭제에 필요한 권한이 충분하지 않음."

#: pcbnew/pcb_io/geda/pcb_io_geda.cpp:987
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:2790
#, c-format
msgid "Library folder '%s' has unexpected sub-folders."
msgstr "라이브러리 폴더 '%s'에 예기치 못한 하위 폴더가 존재합니다."

#: pcbnew/pcb_io/geda/pcb_io_geda.cpp:1006
#, c-format
msgid "Unexpected file '%s' found in library '%s'."
msgstr "예기치 못한 파일 '%s'이(가) 라이브러리 '%s'에서 발견되었습니다."

#: pcbnew/pcb_io/geda/pcb_io_geda.cpp:1025
#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:3258
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:2827
#, c-format
msgid "Footprint library '%s' cannot be deleted."
msgstr "풋프린트 라이브러리 '%s'을(를) 삭제할 수 없습니다."

#: pcbnew/pcb_io/geda/pcb_io_geda.h:52
#, fuzzy
msgid "gEDA PCB footprint file"
msgstr "풋프린트 필터 추가"

#: pcbnew/pcb_io/geda/pcb_io_geda.h:57
#, fuzzy
msgid "gEDA PCB footprint library directory"
msgstr "Altium PCB 풋프린트 라이브러리 파일"

#: pcbnew/pcb_io/ipc2581/pcb_io_ipc2581.cpp:305
#, fuzzy
msgid "Generating content section"
msgstr "연결 선택"

#: pcbnew/pcb_io/ipc2581/pcb_io_ipc2581.cpp:1120
#, fuzzy
msgid "Generating history section"
msgstr "번호 매기기 방향"

#: pcbnew/pcb_io/ipc2581/pcb_io_ipc2581.cpp:1147
#: pcbnew/pcb_io/ipc2581/pcb_io_ipc2581.cpp:2734
#, fuzzy
msgid "Generating BOM section"
msgstr "렌더링 옵션"

#: pcbnew/pcb_io/ipc2581/pcb_io_ipc2581.cpp:1311
msgid "Generating CAD data"
msgstr "CAD 데이터 생성"

#: pcbnew/pcb_io/ipc2581/pcb_io_ipc2581.cpp:2347
#, c-format
msgid "Exporting Layer %s, Net %s"
msgstr "레이어 %s 내보내기, 네트 %s"

#: pcbnew/pcb_io/ipc2581/pcb_io_ipc2581.cpp:2889
#, fuzzy
msgid "Generating logistic section"
msgstr "배치 파일 생성"

#: pcbnew/pcb_io/ipc2581/pcb_io_ipc2581.cpp:2901
msgid "Saving file"
msgstr "파일 저장"

#: pcbnew/pcb_io/ipc2581/pcb_io_ipc2581.cpp:2933
#, fuzzy
msgid "Failed to save file to buffer"
msgstr "만들기 실패"

#: pcbnew/pcb_io/ipc2581/pcb_io_ipc2581.h:88
msgid "IPC-2581 Production File"
msgstr "IPC-2581 생산 파일"

#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:653
#, c-format
msgid "File '%s' has an unrecognized version: %d."
msgstr "파일 '%s'에 인식할 수 없는 버전이 있습니다: %d."

#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:796
#, c-format
msgid "Unknown sheet type '%s' on line: %d."
msgstr "알 수 없는 시트 유형 '%s'이(가) 행 '%d'에서 발견되었습니다."

#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:1362
#, c-format
msgid "Missing '$EndMODULE' for MODULE '%s'."
msgstr "MODULE '%s'에 대한 '$EndMODULE'이 누락되었습니다."

#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:1412
#, c-format
msgid "Unknown padshape '%c=0x%02x' on line: %d of footprint: '%s'."
msgstr ""
"알 수 없는 패드 형상 '%c=0x%02x' 이(가) 행: %d 풋프린트: '%s' 에서 발견되었습"
"니다."

#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:1601
#, fuzzy, c-format
msgid "Unknown PCB_SHAPE type:'%c=0x%02x' on line %d of footprint '%s'."
msgstr ""
"알 수 없는 FP_SHAPE 유형:'%c=0x%02x'이(가) 행: %d 풋프린트: '%s' 에서 발견되"
"었습니다."

#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:2362
#, c-format
msgid "Duplicate NETCLASS name '%s'."
msgstr "네트클래스 이름 '%s'을(를) 복제합니다."

#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:2443
#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:2454
#, c-format
msgid "Bad ZAux for CZONE_CONTAINER \"%s\""
msgstr "CZONE_CONTAINER \"%s\"에 대해 유효하지 않은 ZAux"

#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:2469
#, c-format
msgid "Bad ZSmoothing for CZONE_CONTAINER \"%s\""
msgstr "CZONE_CONTAINER \"%s\"에 대해 유효하지 않은 Z다듬기"

#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:2521
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:6147
msgid ""
"The legacy segment zone fill mode is no longer supported.\n"
"Zone fills will be converted on a best-effort basis."
msgstr ""
"오래된 세그먼트 영역 채우기 모드는 더 이상 지원되지 않습니다.\n"
"영역 채우기는 최선의 노력으로 변환됩니다."

#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:2547
#, c-format
msgid "Bad ZClearance padoption for CZONE_CONTAINER \"%s\""
msgstr "CZONE_CONTAINER \"%s\"에 대한 옳지 않은 Z 클리어런스 패드옵션"

#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:2844
#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:2883
#, c-format
msgid ""
"Invalid floating point number in file: '%s'\n"
"line: %d, offset: %d"
msgstr ""
"파일 '%s'에 잘못된 부동 소수점 값 있음:\n"
"행: %d, 오프셋: %d"

#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:2854
#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:2893
#, c-format
msgid ""
"Missing floating point number in file: '%s'\n"
"line: %d, offset: %d"
msgstr ""
"파일 '%s'에 부동 소수점 숫자 누락됨:\n"
"행: %d, 오프셋: %d"

#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:3032
#, c-format
msgid "File '%s' is empty."
msgstr "%s 파일을 찾을 수 없습니다."

#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.cpp:3035
#, c-format
msgid "File '%s' is not a legacy library."
msgstr "파일 '%s'은(는) 레거시 라이브러리가 아닙니다."

#: pcbnew/pcb_io/kicad_legacy/pcb_io_kicad_legacy.h:76
msgid "Legacy footprint library files"
msgstr "레거시 풋프린트 라이브러리 파일"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:94
#, c-format
msgid "Cannot create footprint library '%s'."
msgstr "풋프린트 라이브러리 '%s'을(를) 만들 수 없습니다."

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:100
#, c-format
msgid "Footprint library '%s' is read only."
msgstr "풋프린트 라이브러리 '%s'은(는) 읽기 전용입니다."

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:141
#, c-format
msgid "Cannot rename temporary file '%s' to '%s'"
msgstr "임시 파일 '%s'의 이름을 '%s'(으)로 변경할 수 없음"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:306
msgid "Internal Group Data Error"
msgstr "내부 그룹 데이터 오류"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:307
#, c-format
msgid ""
"Please report this bug.  Error validating group structure: %s\n"
"\n"
"Save anyway?"
msgstr ""
"이 버그를 보고해주세요.  그룹 구조의 유효성 검사 중에 오류가 발생하였습니다: "
"%s\n"
"\n"
"그래도 저장하시겠습니까?"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:309
msgid "Save Anyway"
msgstr "강제로 저장"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:1459
#, c-format
msgid "unknown pad type: %d"
msgstr "알 수 없는 패드 유형: %d"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:2100
#, c-format
msgid "unknown via type %d"
msgstr "알 수 없는 비아 유형 %d"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:2328
#, c-format
msgid "unknown zone corner smoothing type %d"
msgstr "알 수 없는 영역 모서리 다듬기 유형 %d"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:2480
msgid "This file does not contain a PCB."
msgstr "이 파일에는 PCB가 포함되어 있지 않습니다."

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:2647
#, c-format
msgid ""
"Library '%s' does not exist.\n"
"Would you like to create it?"
msgstr ""
"라이브러리 '%s'이(가) 존재하지 않습니다.\n"
"생성하시겠습니까?"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:2652
msgid "Library Not Found"
msgstr "라이브러리를 찾을 수 없습니다"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:2679
#, c-format
msgid "Footprint file name '%s' is not valid."
msgstr "풋프린트 파일 이름 '%s'이(가) 잘못되었습니다."

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:2685
#, c-format
msgid "Insufficient permissions to delete '%s'."
msgstr "'%s' 삭제에 필요한 권한이 충분하지 않음."

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:2757
#, c-format
msgid "Cannot overwrite library path '%s'."
msgstr "라이브러리 경로 '%s'을(를) 덮어쓸 수 없습니다."

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.cpp:2809
#, c-format
msgid "Unexpected file '%s' found in library path '%s'."
msgstr "예기치 못한 파일 '%s'이(가) 라이브러리 경로 '%s'에서 발견되었습니다."

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr.h:293
#, fuzzy
msgid "KiCad footprint file"
msgstr "KiCad 풋프린트 파일"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:281
#, c-format
msgid "Cannot interpret date code %d"
msgstr "날짜 코드 %d을(를) 해석할 수 없습니다"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:1089
#, c-format
msgid ""
"Items found on undefined layers (%s).\n"
"Do you wish to rescue them to the %s layer?"
msgstr ""
"정의되지 않은 레이어에서 발견된 항목 (%s).\n"
"%s 레이어로 복구하시겠습니까?"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:1094
msgid "Undefined Layers Warning"
msgstr "미정의 레이어 경고"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:1213
#, c-format
msgid "Cannot create generated object of type '%s'"
msgstr "'%s' 유형의 생성된 개체를 만들 수 없음"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:1350
#, c-format
msgid "Page type '%s' is not valid."
msgstr "페이지 유형 '%s'이(가) 잘못되었습니다."

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:1904
#, c-format
msgid "Layer '%s' in file '%s' at line %d is not in fixed layer hash."
msgstr "레이어 '%s' (파일 '%s', 행 %d) 가 고정 레이어 해시에 없습니다."

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:1941
#, c-format
msgid "%d is not a valid layer count"
msgstr "%d는 유효한 레이어 번호가 아닙니다"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:2615
#, c-format
msgid "Duplicate NETCLASS name '%s' in file '%s' at line %d, offset %d."
msgstr ""
"중복 네트클래스 이름 '%s'이(가) 파일 '%s'의 라인 %d, 오프셋 %d에서 발견되었습"
"니다."

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:2995
#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:5372
#, c-format
msgid ""
"Invalid net ID in\n"
"file: '%s'\n"
"line: %d\n"
"offset: %d."
msgstr ""
"잘못된 네트 ID가\n"
"파일: '%s'\n"
"행: %d\n"
"오프셋: %d에서 발견됨."

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:3163
#, c-format
msgid "Cannot handle footprint text type %s"
msgstr "풋프린트 텍스트 유형 %s을(를) 처리할 수 없습니다"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:3929
#, c-format
msgid ""
"Invalid footprint ID in\n"
"file: %s\n"
"line: %d\n"
"offset: %d."
msgstr ""
"잘못된 풋프린트 ID가 발견됨\n"
"파일: %s\n"
"행: %d\n"
"오프셋: %d."

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:4616
#, c-format
msgid ""
"Invalid net ID in\n"
"file: %s\n"
"line: %d offset: %d"
msgstr ""
"잘못된 네트 ID가\n"
"파일: %s\n"
"행: %d 오프셋: %d에서 발견됨"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:4635
#, c-format
msgid ""
"Net name doesn't match ID in\n"
"file: %s\n"
"line: %d offset: %d"
msgstr ""
"네트 이름이 ID와 일치하지 않음\n"
"파일: %s\n"
"행: %d 오프셋: %d"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:4936
#, c-format
msgid ""
"Invalid zero-sized pad pinned to %s in\n"
"file: %s\n"
"line: %d\n"
"offset: %d"
msgstr ""
"%s에 고정된 잘못된 0 크기의 패드가 있음\n"
"파일: %s\n"
"행: %d\n"
"오프셋: %d"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:5287
#, c-format
msgid ""
"Invalid net ID in\n"
"file: %s\n"
"line: %d\n"
"offset: %d."
msgstr ""
"잘못된 네트 ID가 발견됨\n"
"파일: %s\n"
"행: %d\n"
"오프셋: %d."

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:5473
#, c-format
msgid ""
"Invalid net ID in\n"
"file: %s\n"
"line: %d\n"
"offset: %d"
msgstr ""
"잘못된 네트 ID가 발견됨\n"
"파일: %s\n"
"행: %d\n"
"오프셋: %d"

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:5603
#, c-format
msgid ""
"Invalid net ID in\n"
"file: %s;\n"
"line: %d\n"
"offset: %d."
msgstr ""
"잘못된 네트 ID가 발견됨\n"
"파일: %s;\n"
"행: %d\n"
"오프셋: %d."

#: pcbnew/pcb_io/kicad_sexpr/pcb_io_kicad_sexpr_parser.cpp:6116
msgid ""
"Legacy zone fill strategy is not supported anymore.\n"
"Zone fills will be converted on best-effort basis."
msgstr ""
"오래된 영역 채우기 전략은 더 이상 지원되지 않습니다.\n"
"영역 채우기는 최선의 노력으로 변환됩니다."

#: pcbnew/pcb_io/pcad/pcad_pcb.cpp:48 pcbnew/pcb_io/pcad/pcad_pcb.cpp:59
#: pcbnew/pcb_io/pcad/pcad_pcb.cpp:70
#, c-format
msgid "Unknown PCad layer %u"
msgstr "알 수 없는 PCad 레이어 %u"

#: pcbnew/pcb_io/pcad/pcad_pcb.cpp:753
msgid "KiCad only supports 32 signal layers."
msgstr "KiCad는 32개의 신호 레이어만을 지원합니다."

#: pcbnew/pcb_io/pcad/pcad_via.cpp:92
msgid "Unable to find library section."
msgstr "라이브러리 섹션을 찾을 수 없습니다."

#: pcbnew/pcb_io/pcad/pcad_via.cpp:107
#, c-format
msgid "Unable to find viaStyleDef %s."
msgstr "StyleDef %s을(를) 통해 찾을 수 없습니다."

#: pcbnew/pcb_io/pcad/pcb_io_pcad.h:44
msgid "P-Cad 200x ASCII PCB files"
msgstr "P-Cad 200x ASCII PCB 파일"

#: pcbnew/pcb_io/pcb_io.cpp:121
msgid ""
"Selected file contains multiple footprints. Only the first one will be "
"imported."
msgstr ""
"선택한 파일에 여러 개의 풋프린트가 포함되어 있습니다. 첫 번째 파일만 가져옵니"
"다."

#: pcbnew/pcb_io/pcb_io.cpp:179
#, fuzzy
msgid "Enable <b>debug</b> logging for Footprint*() functions in this PCB_IO."
msgstr ""
"Footprint*() 함수 로그를 얻기 위해서 현재 플러그인의 <b>디버그</b>를 활성화합"
"니다."

#: pcbnew/pcb_io/pcb_io.cpp:182
msgid "Regular expression <b>footprint name</b> filter."
msgstr "정규표현식을 통해 <b>풋프린트 이름</b> 을 필터링합니다."

#: pcbnew/pcb_io/pcb_io.cpp:185
msgid ""
"Enable transaction logging. The mere presence of this option turns on the "
"logging, no need to set a Value."
msgstr ""
"트랜잭션 로깅을 허용합니다. 이 옵션이 있다면 로깅이 켜지므로 값을 설정하지 않"
"아도 됩니다."

#: pcbnew/pcb_io/pcb_io.cpp:190
msgid "User name for <b>login</b> to some special library server."
msgstr "특별한 라이브러리 서버에 <b>로그인 </b> 하기 위한 유저명."

#: pcbnew/pcb_io/pcb_io.cpp:193
msgid "Password for <b>login</b> to some special library server."
msgstr "특별한 라이브러리 서버에 <b>로그인 </b> 하기 위한 비밀번호."

#: pcbnew/pcb_io/pcb_io.cpp:200
#, fuzzy
msgid ""
"Enter the python module which implements the PCB_IO::Footprint*() functions."
msgstr "PLUGIN::Footprint*() 함수를 구현하는 python 모듈을 입력하세요."

#: pcbnew/pcb_io/pcb_io_mgr.cpp:86
#, c-format
msgid "UNKNOWN (%d)"
msgstr "알 수 없음 (%d)"

#: pcbnew/pcb_layer_box_selector.cpp:62
msgid "(not activated)"
msgstr "(활성화되지 않음)"

#: pcbnew/pcb_marker.cpp:195
msgid "Violation"
msgstr "위반"

#: pcbnew/pcb_marker.cpp:200 pcbnew/pcb_marker.cpp:203
#: pcbnew/pcb_marker.cpp:206
msgid "Severity"
msgstr "심각도"

#: pcbnew/pcb_marker.cpp:264
#, c-format
msgid "Marker (%s)"
msgstr "마커 (%s)"

#: pcbnew/pcb_reference_image.cpp:347
msgid "Associated Layer"
msgstr "연관 레이어"

#: pcbnew/pcb_reference_image.cpp:358
msgid "Greyscale"
msgstr "그레이스케일"

#: pcbnew/pcb_shape.cpp:471
msgid "Drawing"
msgstr "도면"

#: pcbnew/pcb_shape.cpp:486
#, fuzzy, c-format
msgid "%s %s on %s"
msgstr "%s %s on %s"

#: pcbnew/pcb_shape.cpp:491
#, c-format
msgid "%s on %s"
msgstr "%s (%s)"

#: pcbnew/pcb_shape.cpp:741
#, fuzzy
msgid "Pad Primitives"
msgstr "기본 요소 추가"

#: pcbnew/pcb_target.cpp:151
msgid "PCB Target"
msgstr "PCB 타겟"

#: pcbnew/pcb_text.cpp:226
msgid "PCB Text"
msgstr "PCB 텍스트"

#: pcbnew/pcb_text.cpp:235
msgid "Display"
msgstr "표시"

#: pcbnew/pcb_text.cpp:386
#, c-format
msgid "Footprint Text '%s' of %s"
msgstr "풋프린트 텍스트 '%s'의%s"

#: pcbnew/pcb_text.cpp:390
#, c-format
msgid "PCB Text '%s' on %s"
msgstr "PCB 텍스트 '%s' (%s)"

#: pcbnew/pcb_textbox.cpp:468
#, c-format
msgid "PCB Text Box on %s"
msgstr "PCB 텍스트 상자 %s"

#: pcbnew/pcb_textbox.cpp:679
#, fuzzy
msgid "Border Properties"
msgstr "곡선 속성"

#: pcbnew/pcb_textbox.cpp:689
msgid "Border Style"
msgstr "테두리 스타일"

#: pcbnew/pcb_track.cpp:139
#, c-format
msgid "Blind/Buried Via %s on %s"
msgstr "숨겨진 비아 %s on %s"

#: pcbnew/pcb_track.cpp:140
#, c-format
msgid "Micro Via %s on %s"
msgstr "마이크로 비아 %s on %s"

#: pcbnew/pcb_track.cpp:141
#, c-format
msgid "Via %s on %s"
msgstr "비아 %s on %s"

#: pcbnew/pcb_track.cpp:364
msgid "removed annular ring"
msgstr "환형 고리 제거됨"

#: pcbnew/pcb_track.cpp:1055
msgid "Track (arc)"
msgstr "배선(호)"

#: pcbnew/pcb_track.cpp:1082
msgid "Segment Length"
msgstr "세그먼트 길이"

#: pcbnew/pcb_track.cpp:1117
#, fuzzy, c-format
msgid "Width Constraints: %s"
msgstr "너비 제한: 최소 %s"

#: pcbnew/pcb_track.cpp:1129
msgid "Micro Via"
msgstr "마이크로 비아"

#: pcbnew/pcb_track.cpp:1130
msgid "Blind/Buried Via"
msgstr "숨겨진 비아"

#: pcbnew/pcb_track.cpp:1131
msgid "Through Via"
msgstr "관통 비아"

#: pcbnew/pcb_track.cpp:1152
#, c-format
msgid "Min Annular Width: %s"
msgstr "최소 환형 폭: %s"

#: pcbnew/pcb_track.cpp:1168
msgid "NetCode"
msgstr "네트 코드"

#: pcbnew/pcb_track.cpp:1297
#, c-format
msgid "Track (arc) %s on %s, length %s"
msgstr "배선 (호) %s on %s, 길이 %s"

#: pcbnew/pcb_track.cpp:1298
#, c-format
msgid "Track %s on %s, length %s"
msgstr "배선 %s on %s, 길이 %s"

#: pcbnew/pcb_track.cpp:1515
msgid "Via Properties"
msgstr "비아 속성"

#: pcbnew/pcb_track.cpp:1525 pcbnew/widgets/pcb_properties_panel.cpp:260
msgid "Layer Top"
msgstr "레이어 상단"

#: pcbnew/pcb_track.cpp:1527 pcbnew/widgets/pcb_properties_panel.cpp:261
msgid "Layer Bottom"
msgstr "레이어 하단"

#: pcbnew/pcb_track.cpp:1529
msgid "Via Type"
msgstr "비아 유형"

#: pcbnew/pcbexpr_evaluator.cpp:422
msgid "must be mm, in, or mil"
msgstr "mm, in 또는 mil이어야 합니다"

#: pcbnew/pcbexpr_functions.cpp:74
#, c-format
msgid "Missing layer name argument to %s."
msgstr "%s에 대한 레이어 이름 인수가 없습니다."

#: pcbnew/pcbexpr_functions.cpp:127
#, c-format
msgid "Unrecognized layer '%s'"
msgstr "인식할 수 없는 레이어 '%s'"

#: pcbnew/pcbexpr_functions.cpp:240
#, c-format
msgid "Missing footprint argument (A, B, or reference designator) to %s."
msgstr "%s에 대한 풋프린트 인수(A, B 또는 참조 지정자)가 누락되었습니다."

#: pcbnew/pcbexpr_functions.cpp:462
msgid "Footprint's courtyard is not a single, closed shape."
msgstr "풋프린트의 부품자리는 하나의 닫힌 형태가 아닙니다."

#: pcbnew/pcbexpr_functions.cpp:474
msgid "Footprint has no front courtyard."
msgstr "풋프린트에 전면 부품자리가 없습니다."

#: pcbnew/pcbexpr_functions.cpp:489
msgid "Footprint has no back courtyard."
msgstr "풋프린트에 후면 부품자리가 없습니다."

#: pcbnew/pcbexpr_functions.cpp:605
#, c-format
msgid "Missing rule-area argument (A, B, or rule-area name) to %s."
msgstr "%s에 대한 규칙 영역 인수(A, B 또는 규칙 영역 이름)가 누락되었습니다."

#: pcbnew/pcbexpr_functions.cpp:780
#, c-format
msgid "Missing group name argument to %s."
msgstr "%s에 대한 그룹 이름 인수가 없습니다."

#: pcbnew/pcbexpr_functions.cpp:826
#, fuzzy, c-format
msgid "Missing sheet name argument to %s."
msgstr "%s에 대한 레이어 이름 인수가 없습니다."

#: pcbnew/pcbexpr_functions.cpp:873
#, fuzzy, c-format
msgid "Missing footprint argument (reference designator) to %s."
msgstr "%s에 대한 풋프린트 인수(A, B 또는 참조 지정자)가 누락되었습니다."

#: pcbnew/pcbexpr_functions.cpp:990
#, c-format
msgid "Missing diff-pair name argument to %s."
msgstr "%s에 대한 diff-pair 이름 인수가 없습니다."

#: pcbnew/pcbexpr_functions.cpp:1057
#, c-format
msgid "Missing field name argument to %s."
msgstr "%s에 대한 필드 이름 인수가 없습니다."

#: pcbnew/pcbnew.cpp:483
msgid ""
"An error occurred attempting to load the global footprint library table.\n"
"Please edit this global footprint library table in Preferences menu."
msgstr ""
"전역 풋프린트 라이브러리 테이블을 불러오는 도중 오류가 발생하였습니다.\n"
"설정 메뉴에서 전역 풋프린트 라이브러리 테이블을 편집하세요."

#: pcbnew/pcbnew_jobs_handler.cpp:108 pcbnew/pcbnew_jobs_handler.cpp:232
#: pcbnew/pcbnew_jobs_handler.cpp:258 pcbnew/pcbnew_jobs_handler.cpp:315
#: pcbnew/pcbnew_jobs_handler.cpp:386 pcbnew/pcbnew_jobs_handler.cpp:520
#: pcbnew/pcbnew_jobs_handler.cpp:573 pcbnew/pcbnew_jobs_handler.cpp:695
#: pcbnew/pcbnew_jobs_handler.cpp:965 pcbnew/pcbnew_jobs_handler.cpp:1135
msgid "Loading board\n"
msgstr "보드 로드 중\n"

#: pcbnew/pcbnew_jobs_handler.cpp:164
#, c-format
msgid "Successfully exported VRML to %s"
msgstr "VRML을 %s로 내보냈습니다"

#: pcbnew/pcbnew_jobs_handler.cpp:169
msgid "Error exporting VRML"
msgstr "VRML 내보내기 오류"

#: pcbnew/pcbnew_jobs_handler.cpp:241
msgid "Successfully created svg file"
msgstr "성공적으로 svg 파일을 생성함"

#: pcbnew/pcbnew_jobs_handler.cpp:243 pcbnew/pcbnew_jobs_handler.cpp:950
msgid "Error creating svg file"
msgstr "svg 파일 생성 오류"

#: pcbnew/pcbnew_jobs_handler.cpp:468 pcbnew/pcbnew_jobs_handler.cpp:550
#, c-format
msgid "Failed to plot to '%s'.\n"
msgstr "'%s'로 플롯 실패.\n"

#: pcbnew/pcbnew_jobs_handler.cpp:581
msgid "Failed to create output directory\n"
msgstr "출력 디렉토리 생성 실패\n"

#: pcbnew/pcbnew_jobs_handler.cpp:771 pcbnew/pcbnew_jobs_handler.cpp:843
msgid "Loading footprint library\n"
msgstr "풋프린트 라이브러리 로드\n"

#: pcbnew/pcbnew_jobs_handler.cpp:809
msgid "Saving footprint library\n"
msgstr "풋프린트 라이브러리 저장\n"

#: pcbnew/pcbnew_jobs_handler.cpp:822
msgid "Unable to save library\n"
msgstr "라이브러리를 저장할 수 없음\n"

#: pcbnew/pcbnew_jobs_handler.cpp:828
msgid "Footprint library was not updated\n"
msgstr "풋프린트 라이브러리가 업데이트되지 않음\n"

#: pcbnew/pcbnew_jobs_handler.cpp:893
msgid "The given footprint could not be found to export."
msgstr "내보낼 지정된 풋프린트를 찾을 수 없습니다."

#: pcbnew/pcbnew_jobs_handler.cpp:934
#, c-format
msgid "Plotting footprint '%s' to '%s'\n"
msgstr "풋프린트 '%s'를 '%s'로 플로팅\n"

#: pcbnew/pcbnew_jobs_handler.cpp:1008
msgid "Running DRC...\n"
msgstr "DRC 실행...\n"

#: pcbnew/pcbnew_jobs_handler.cpp:1026
#, fuzzy
msgid "Failed to find schematic for parity tests.\n"
msgstr "회로도 파일을 로드하지 못했습니다.\n"

#: pcbnew/pcbnew_jobs_handler.cpp:1041
#, fuzzy
msgid "Failed to fetch schematic netlist for parity tests.\n"
msgstr "회로도 파일을 로드하지 못했습니다.\n"

#: pcbnew/pcbnew_jobs_handler.cpp:1062 pcbnew/tools/drc_tool.cpp:194
msgid "DRC"
msgstr "DRC"

#: pcbnew/pcbnew_jobs_handler.cpp:1085
#, c-format
msgid "Found %d unconnected items\n"
msgstr "%d개의 연결되지 않은 항목 발견\n"

#: pcbnew/pcbnew_jobs_handler.cpp:1091
#, c-format
msgid "Found %d schematic parity issues\n"
msgstr "%d 회로도 패리티 문제 발견\n"

#: pcbnew/pcbnew_jobs_handler.cpp:1106
#, c-format
msgid "Unable to save DRC report to %s\n"
msgstr "ERC 보고서를 %s에 저장할 수 없음\n"

#: pcbnew/pcbnew_jobs_handler.cpp:1111
#, c-format
msgid "Saved DRC Report to %s\n"
msgstr "DRC 보고서를 %s에 저장함\n"

#: pcbnew/pcbnew_printout.cpp:116
msgid "Multiple Layers"
msgstr "여러 레이어"

#: pcbnew/project_pcb.cpp:64
msgid "Error loading project footprint libraries."
msgstr "프로젝트 풋프린트 라이브러리를 불러오는 중에 오류가 발생했습니다."

#: pcbnew/python/scripting/pcbnew_action_plugins.cpp:82
msgid "Exception on python action plugin code"
msgstr "python 액션 플러그인 코드에서의 예외 사항"

#: pcbnew/python/scripting/pcbnew_action_plugins.cpp:138
#: pcbnew/python/scripting/pcbnew_footprint_wizards.cpp:83
#, c-format
msgid "Method '%s' not found, or not callable"
msgstr "메서드 '%s'을(를) 찾을 수 없거나, 호출할 수 없음"

#: pcbnew/python/scripting/pcbnew_action_plugins.cpp:139
#: pcbnew/python/scripting/pcbnew_footprint_wizards.cpp:84
msgid "Unknown Method"
msgstr "알 수 없는 메서드"

#: pcbnew/python/scripting/pcbnew_action_plugins.cpp:412
msgid "Apply action script"
msgstr "액션 스크립트 적용"

#: pcbnew/python/scripting/pcbnew_footprint_wizards.cpp:70
msgid "Exception on python footprint wizard code"
msgstr "python 풋프린트 마법사 코드에서의 예외 사항"

#: pcbnew/router/pns_diff_pair_placer.cpp:496
msgid ""
"Unable to find complementary differential pair nets. Make sure the names of "
"the nets belonging to a differential pair end with either N/P or +/-."
msgstr ""
"보조 차동 쌍 네트를 찾을 수 없습니다. 차동 쌍에 속한 네트의 이름이 N/P 또는 "
"+/-으로 끝나는지 확인하세요."

#: pcbnew/router/pns_diff_pair_placer.cpp:513
msgid ""
"Can't find a suitable starting point.  If starting from an existing "
"differential pair make sure you are at the end."
msgstr ""
"적합한 시작 지점을 찾을 수 없습니다. 이미 존재하는 차동 쌍에서 시작한다면, "
"끝 지점에 도달하였는지 확인하세요."

#: pcbnew/router/pns_diff_pair_placer.cpp:568
#, c-format
msgid "Can't find a suitable starting point for coupled net \"%s\"."
msgstr "네트 쌍 \"%s\" 에 대한 적합한 시작 지점을 찾을 수 없습니다."

#: pcbnew/router/pns_dp_meander_placer.cpp:80
#: pcbnew/router/pns_meander_placer.cpp:63
msgid "Please select a track whose length you want to tune."
msgstr "길이를 조정하고 싶은 배선을 선택하세요."

#: pcbnew/router/pns_dp_meander_placer.cpp:94
msgid ""
"Unable to find complementary differential pair net for length tuning. Make "
"sure the names of the nets belonging to a differential pair end with either "
"_N/_P or +/-."
msgstr ""
"길이 조정을 위한 보조 차동 쌍 네트를 찾을 수 없습니다. 차동 쌍에 속하는 네트"
"의 이름이 _N/_P 또는 +/-으로 끝나는지 확인하세요."

#: pcbnew/router/pns_kicad_iface.cpp:655 pcbnew/router/pns_kicad_iface.cpp:745
#: pcbnew/router/router_tool.cpp:798
msgid "board minimum clearance"
msgstr "보드 최소 클리어런스"

#: pcbnew/router/pns_kicad_iface.cpp:669 pcbnew/router/pns_kicad_iface.cpp:744
#: pcbnew/router/router_tool.cpp:760 pcbnew/router/router_tool.cpp:785
msgid "board minimum track width"
msgstr "기판 최소 트랙 너비"

#: pcbnew/router/pns_kicad_iface.cpp:676 pcbnew/router/router_tool.cpp:762
msgid "existing track"
msgstr "기존 배선"

#: pcbnew/router/pns_kicad_iface.cpp:697
msgid "netclass 'Default'"
msgstr "네트클래스 '기본값'"

#: pcbnew/router/pns_kicad_iface.cpp:1261
#, c-format
msgid "%s is malformed."
msgstr "%s의 형식이 잘못되었습니다."

#: pcbnew/router/pns_kicad_iface.cpp:1264
msgid ""
"This zone cannot be handled by the router.\n"
"Please verify it is not a self-intersecting polygon."
msgstr ""
"이 영역은 라우터가 처리할 수 없습니다.\n"
"자체 교차하는 다각형이 아닌지 확인하세요."

#: pcbnew/router/pns_kicad_iface.cpp:1987
#, fuzzy
msgid "Routing"
msgstr "라우팅 배선"

#: pcbnew/router/pns_meander_skew_placer.cpp:52
msgid "Please select a differential pair trace you want to tune."
msgstr "조정을 원하는 차동 쌍을 선택하세요."

#: pcbnew/router/pns_meander_skew_placer.cpp:68
msgid ""
"Unable to find complementary differential pair net for skew tuning. Make "
"sure the names of the nets belonging to a differential pair end with either "
"_N/_P or +/-."
msgstr ""
"스큐 조율을 위한 보조 차동 쌍을 찾을 수 없습니다. 차동 쌍에 속하는 네트의 이"
"름이 _N/_P 또는 +/-으로 끝나는지 확인하세요."

#: pcbnew/router/pns_router.cpp:213
msgid "Diff pair gap is less than board minimum clearance."
msgstr "치수 쌍 간격이 기판의 최소 클리어런스보다 작습니다."

#: pcbnew/router/pns_router.cpp:246
msgid "Cannot start routing from a non-plated hole."
msgstr "도금되지 않은 홀부터 라우팅을 시작할 수 없습니다."

#: pcbnew/router/pns_router.cpp:256
#, c-format
msgid "Rule area '%s' disallows tracks."
msgstr "규칙 영역 '%s'이(가) 배선을 허용하지 않습니다."

#: pcbnew/router/pns_router.cpp:261
msgid "Rule area disallows tracks."
msgstr "규칙 영역이 배션을 허용하지 않습니다."

#: pcbnew/router/pns_router.cpp:269
msgid "Cannot start routing from a text item."
msgstr "텍스트 개체로부터 라우팅을 시작할 수 없습니다."

#: pcbnew/router/pns_router.cpp:315 pcbnew/router/pns_router.cpp:380
msgid "The routing start point violates DRC."
msgstr "라우팅 시작 지점이 DRC를 위반합니다."

#: pcbnew/router/pns_router.cpp:324
msgid "Cannot start a differential pair in the middle of nowhere."
msgstr "아무것도 없는 공간에서 차동 쌍을 시작할 수 없습니다."

#: pcbnew/router/router_tool.cpp:115
msgid "Place Through Via"
msgstr "관통 비아 배치"

#: pcbnew/router/router_tool.cpp:116
msgid "Adds a through-hole via at the end of currently routed track."
msgstr "현재 라우팅된 배선의 끝에 스루홀 비아를 추가합니다."

#: pcbnew/router/router_tool.cpp:126
msgid "Place Blind/Buried Via"
msgstr "블라인드/ 베리드 비아 배치"

#: pcbnew/router/router_tool.cpp:127
msgid "Adds a blind or buried via at the end of currently routed track."
msgstr "현재 라우팅된 배선의 끝에 블라인드 / 베리드 비아를 추가합니다."

#: pcbnew/router/router_tool.cpp:137
msgid "Place Microvia"
msgstr "마이크로비아 배치"

#: pcbnew/router/router_tool.cpp:138
msgid "Adds a microvia at the end of currently routed track."
msgstr "현재 라우팅된 배선의 끝에 마이크로 비아를 추가합니다."

#: pcbnew/router/router_tool.cpp:148
msgid "Select Layer and Place Through Via..."
msgstr "레이어를 선택하여 관통 비아를 배치..."

#: pcbnew/router/router_tool.cpp:149
msgid ""
"Select a layer, then add a through-hole via at the end of currently routed "
"track."
msgstr "레이어를 선택하고, 현재 라우팅중인 배선의 끝에 스루홀을 추가합니다."

#: pcbnew/router/router_tool.cpp:159
msgid "Select Layer and Place Blind/Buried Via..."
msgstr "레이어를 선택하여 블라인드/베리드 비아를 배치..."

#: pcbnew/router/router_tool.cpp:160
msgid ""
"Select a layer, then add a blind or buried via at the end of currently "
"routed track."
msgstr ""
"레이어를 선택하고, 현재 라우팅중인 배선의 끝에 블라인드 또는 베리드 비아를 추"
"가합니다."

#: pcbnew/router/router_tool.cpp:168
msgid "Select Layer and Place Micro Via..."
msgstr "레이어를 선택하고 마이크로 비아를 배치..."

#: pcbnew/router/router_tool.cpp:169
msgid ""
"Select a layer, then add a micro via at the end of currently routed track."
msgstr ""
"레이어를 선택하고, 현재 라우팅중인 배선의 끝에 마이크로 비아를 추가합니다."

#: pcbnew/router/router_tool.cpp:179
msgid "Custom Track/Via Size..."
msgstr "사용자 정의 배선/비아 크기..."

#: pcbnew/router/router_tool.cpp:180
msgid "Shows a dialog for changing the track width and via size."
msgstr "배선의 폭과 비아 사이즈를 편집하는 대화 창을 표시합니다."

#: pcbnew/router/router_tool.cpp:188
msgid "Switch Track Posture"
msgstr "배선의 모양을 전환"

#: pcbnew/router/router_tool.cpp:189
msgid "Switches posture of the currently routed track."
msgstr "현재 라우팅중인 배선의 모양을 전환합니다."

#: pcbnew/router/router_tool.cpp:196
msgid "Track Corner Mode"
msgstr "배선 코너 모드"

#: pcbnew/router/router_tool.cpp:197
msgid "Switches between sharp/rounded and 45°/90° corners when routing tracks."
msgstr ""
"트랙을 라우팅할 때 모서리를 예리/둥근 모양과 45°/90° 사이를 전환합니다."

#: pcbnew/router/router_tool.cpp:221
msgid "Select Track/Via Width"
msgstr "배선/비아 너비 선택"

#: pcbnew/router/router_tool.cpp:239
msgid "Use Starting Track Width"
msgstr "시작 배선 너비 사용"

#: pcbnew/router/router_tool.cpp:240
msgid "Route using the width of the starting track."
msgstr "시작 배선의 폭을 사용하여 라우팅합니다."

#: pcbnew/router/router_tool.cpp:244 pcbnew/router/router_tool.cpp:369
msgid "Use Net Class Values"
msgstr "네트 클래스 값 사용"

#: pcbnew/router/router_tool.cpp:245
msgid "Use track and via sizes from the net class"
msgstr "네트 클래스의 배선과 비아 크기를 사용합니다"

#: pcbnew/router/router_tool.cpp:249 pcbnew/router/router_tool.cpp:374
#: pcbnew/tools/drawing_tool.cpp:108
msgid "Use Custom Values..."
msgstr "사용자 정의 값 사용..."

#: pcbnew/router/router_tool.cpp:250 pcbnew/tools/drawing_tool.cpp:109
msgid "Specify custom track and via sizes"
msgstr "사용자 정의 배선 및 비아 크기 설정"

#: pcbnew/router/router_tool.cpp:261
msgid "Track netclass width"
msgstr "배선 네트클래스 폭"

#: pcbnew/router/router_tool.cpp:263
#, c-format
msgid "Track %s"
msgstr "배선 %s"

#: pcbnew/router/router_tool.cpp:277
msgid "Via netclass values"
msgstr "비아 네트클래스 값"

#: pcbnew/router/router_tool.cpp:282 pcbnew/tools/drawing_tool.cpp:120
#, c-format
msgid "Via %s, hole %s"
msgstr "비아 %s, 홀 %s"

#: pcbnew/router/router_tool.cpp:288 pcbnew/tools/drawing_tool.cpp:126
#, c-format
msgid "Via %s"
msgstr "비아 %s"

#: pcbnew/router/router_tool.cpp:354
msgid "Select Differential Pair Dimensions"
msgstr "차동 쌍 치수 선택"

#: pcbnew/router/router_tool.cpp:370
msgid "Use differential pair dimensions from the net class"
msgstr "네트 클래스로부터 차동 쌍 치수 사용"

#: pcbnew/router/router_tool.cpp:375
msgid "Specify custom differential pair dimensions"
msgstr "사용자 정의 차동 쌍 치수 지정"

#: pcbnew/router/router_tool.cpp:392
#, c-format
msgid "Width %s"
msgstr "너비 %s"

#: pcbnew/router/router_tool.cpp:397
#, c-format
msgid "Width %s, via gap %s"
msgstr "너비 %s, 비아 간격 %s"

#: pcbnew/router/router_tool.cpp:406
#, c-format
msgid "Width %s, gap %s"
msgstr "폭 %s, 간격 %s"

#: pcbnew/router/router_tool.cpp:412
#, c-format
msgid "Width %s, gap %s, via gap %s"
msgstr "너비 %s, 간격 %s, 비아 간격 %s"

#: pcbnew/router/router_tool.cpp:474
msgid "Interactive Router"
msgstr "대화형 라우터"

#: pcbnew/router/router_tool.cpp:586
msgid "Save router log"
msgstr "라우터 로그 저장"

#: pcbnew/router/router_tool.cpp:1126
msgid "Blind/buried via need 2 different layers."
msgstr "블라인드/매몰 비아는 2개의 다른 레이어가 필요합니다."

#: pcbnew/router/router_tool.cpp:1204
msgid "Tracks on Copper layers only."
msgstr "구리 레이어에만 있는 배선입니다."

#: pcbnew/router/router_tool.cpp:1876 pcbnew/router/router_tool.cpp:2559
msgid "The selected item is locked."
msgstr "선택한 항목이 잠겨 있습니다."

#: pcbnew/router/router_tool.cpp:1878
msgid "Drag Anyway"
msgstr "강제 드래그"

#: pcbnew/router/router_tool.cpp:1936 pcbnew/router/router_tool.cpp:2419
#, c-format
msgid "(%s to commit anyway.)"
msgstr "(%s는 무조건 커밋)"

#: pcbnew/router/router_tool.cpp:1940 pcbnew/router/router_tool.cpp:2423
#, fuzzy
msgid "Track violates DRC."
msgstr "비아 위치가 DRC를 위반합니다."

#: pcbnew/router/router_tool.cpp:2561 pcbnew/tools/pcb_actions.cpp:2396
msgid "Break Track"
msgstr "배선 끊기"

#: pcbnew/router/router_tool.cpp:2642
#, c-format
msgid "Routing Diff Pair: %s"
msgstr "라우팅 차동 쌍: %s"

#: pcbnew/router/router_tool.cpp:2654 pcbnew/router/router_tool.cpp:2664
#, c-format
msgid "Resolved Netclass: %s"
msgstr "확인된 네트클래스: %s"

#: pcbnew/router/router_tool.cpp:2661
#, c-format
msgid "Routing Track: %s"
msgstr "라우팅 배선: %s"

#: pcbnew/router/router_tool.cpp:2669
msgid "Routing Track"
msgstr "라우팅 배선"

#: pcbnew/router/router_tool.cpp:2670
msgid "(no net)"
msgstr "(네트 없음)"

#: pcbnew/router/router_tool.cpp:2679
msgid "Free-angle"
msgstr "자유 각도"

#: pcbnew/router/router_tool.cpp:2685
msgid "45-degree"
msgstr "45 도"

#: pcbnew/router/router_tool.cpp:2686
msgid "45-degree rounded"
msgstr "45도 둥근"

#: pcbnew/router/router_tool.cpp:2687
msgid "90-degree"
msgstr "90 도"

#: pcbnew/router/router_tool.cpp:2688
msgid "90-degree rounded"
msgstr "90도 둥근"

#: pcbnew/router/router_tool.cpp:2693
msgid "Corner Style"
msgstr "모서리 스타일"

#: pcbnew/router/router_tool.cpp:2709 pcbnew/router/router_tool.cpp:2738
#, c-format
msgid "Track Width: %s"
msgstr "배선 너비: %s"

#: pcbnew/router/router_tool.cpp:2719
#, c-format
msgid "Diff Pair Gap: %s"
msgstr "차동 쌍 간격: %s"

#: pcbnew/router/router_tool.cpp:2730 pcbnew/tools/pcb_control.cpp:1515
#, c-format
msgid "DP Max Uncoupled-length: %s"
msgstr "DP 최대 비결합 길이: %s"

#: pcbnew/sel_layer.cpp:351
msgid "Warning: top and bottom layers are same."
msgstr "경고: 상단 및 하단 레이어가 동일합니다."

#: pcbnew/specctra_import_export/specctra_export.cpp:98
msgid "BOARD exported OK."
msgstr "기판 내보내기 완료."

#: pcbnew/specctra_import_export/specctra_export.cpp:100
msgid "Unable to export, please fix and try again"
msgstr "내보내기 할 수 없습니다. 수정 후 다시 시도해주세요"

#: pcbnew/specctra_import_export/specctra_export.cpp:1095
#, c-format
msgid "Footprint with value of '%s' has an empty reference designator."
msgstr "값이 '%s'인 풋프린트에는 빈 참조 지정자가 있습니다."

#: pcbnew/specctra_import_export/specctra_export.cpp:1105
#, c-format
msgid "Multiple footprints have the reference designator '%s'."
msgstr "여러 풋프린트에는 참조 지정자 '%s'가 있습니다."

#: pcbnew/specctra_import_export/specctra_import.cpp:72
msgid ""
"Board may be corrupted, do not save it.\n"
" Fix problem and try again"
msgstr ""
"기판이 손상되어 있는 것 같습니다. 저장하지 마세요.\n"
" 문제점을 수정한 후 다시 시도하세요"

#: pcbnew/specctra_import_export/specctra_import.cpp:91
msgid "Session file imported and merged OK."
msgstr "세션 파일 불러오기 및 합치기 완료."

#: pcbnew/specctra_import_export/specctra_import.cpp:151
#, c-format
msgid "Session file uses invalid layer id '%s'."
msgstr "세션 파일이 유효하지 않은 레이어 id '%s'을(를) 사용합니다."

#: pcbnew/specctra_import_export/specctra_import.cpp:210
msgid "Session via padstack has no shapes"
msgstr "세션 비아 패드스택의 형상이 없습니다"

#: pcbnew/specctra_import_export/specctra_import.cpp:219
#, c-format
msgid "Unsupported via shape: %s."
msgstr "지원되지 않는 비아 모양: %s."

#: pcbnew/specctra_import_export/specctra_import.cpp:240
#: pcbnew/specctra_import_export/specctra_import.cpp:268
#, c-format
msgid "Unsupported via shape: %s"
msgstr "지원되지 않는 비아 형상: %s"

#: pcbnew/specctra_import_export/specctra_import.cpp:278
#, c-format
msgid "Session file uses invalid layer id '%s'"
msgstr "세션 파일이 잘못된 레이어 ID '%s'를 사용합니다"

#: pcbnew/specctra_import_export/specctra_import.cpp:334
msgid "Session file is missing the \"session\" section"
msgstr "세션 파일이 \"session\" 섹션에 존재하지 않습니다"

#: pcbnew/specctra_import_export/specctra_import.cpp:337
msgid "Session file is missing the \"routes\" section"
msgstr "세션 파일이 \"routes\" 섹션에 존재하지 않습니다"

#: pcbnew/specctra_import_export/specctra_import.cpp:340
msgid "Session file is missing the \"library_out\" section"
msgstr "세션 파일이 \"library_out\" 섹션에 존재하지 않습니다"

#: pcbnew/specctra_import_export/specctra_import.cpp:391
#, c-format
msgid "Reference '%s' not found."
msgstr "참조 '%s'을(를) 찾을 수 없습니다."

#: pcbnew/specctra_import_export/specctra_import.cpp:520
#, c-format
msgid "A wire_via refers to missing padstack '%s'."
msgstr "wire_via가 누락된 패드스택 '%s'을(를) 참조합니다."

#: pcbnew/toolbars_footprint_editor.cpp:92
msgid "Load footprint from current board"
msgstr "현재 기판에서 풋프린트 로드"

#: pcbnew/toolbars_footprint_editor.cpp:96
msgid "Insert footprint into current board"
msgstr "현재 기판에 풋프린트 삽입"

#: pcbnew/toolbars_footprint_editor.cpp:282 pcbnew/toolbars_pcb_editor.cpp:756
msgid "+/- to switch"
msgstr "+/-로 스위치"

#: pcbnew/toolbars_footprint_viewer.cpp:62
msgid "Display previous footprint"
msgstr "이전 풋프린트 표시"

#: pcbnew/toolbars_footprint_viewer.cpp:65
msgid "Display next footprint"
msgstr "다음 풋프린트 표시"

#: pcbnew/toolbars_footprint_viewer.cpp:78
msgid "Insert footprint in board"
msgstr "기판에 풋프린트 삽입"

#: pcbnew/toolbars_pcb_editor.cpp:530
msgid ""
"Select the default width for new tracks. Note that this width can be "
"overridden by the board minimum width, or by the width of an existing track "
"if the 'Use Existing Track Width' feature is enabled."
msgstr ""
"새로운 배선에 대한 폭 기본값을 선택하세요. 참고로 이 폭은 기판 최소 폭 또는 "
"'이미 존재하는 배선 폭 사용하기' 기능이 활성화 되어 있을 때 존재하는 배선의 "
"폭으로 재정의될 수 있습니다."

#: pcbnew/toolbars_pcb_editor.cpp:537
msgid ""
"When routing from an existing track use its width instead of the current "
"width setting"
msgstr ""
"이미 존재하는 배선으로부터 라우팅할 때, 해당 배선의 폭을 현재 폭 설정 대신 사"
"용합니다"

#: pcbnew/toolbars_pcb_editor.cpp:658
msgid "Track: use netclass width"
msgstr "배선: 네트클래스 폭 사용하기"

#: pcbnew/toolbars_pcb_editor.cpp:664
#, c-format
msgid "Track: %s (%s)"
msgstr "배선: %s (%s)"

#: pcbnew/toolbars_pcb_editor.cpp:673 pcbnew/toolbars_pcb_editor.cpp:741
msgid "Edit Pre-defined Sizes..."
msgstr "미리 정의된 크기 편집..."

#: pcbnew/toolbars_pcb_editor.cpp:710
msgid "Via: use netclass sizes"
msgstr "비아: 네트클래스 크기 사용하기"

#: pcbnew/toolbars_pcb_editor.cpp:733
#, c-format
msgid "Via: %s (%s)"
msgstr "비아: %s (%s)"

#: pcbnew/tools/board_editor_control.cpp:117
msgid "Locking"
msgstr "잠금"

#: pcbnew/tools/board_editor_control.cpp:383
msgid "Specctra Session File"
msgstr "Specctra 세션 파일"

#: pcbnew/tools/board_editor_control.cpp:410
msgid "Specctra DSN File"
msgstr "Specctra DSN 파일"

#: pcbnew/tools/board_editor_control.cpp:434
msgid "Export Board Netlist"
msgstr "기판 네트리스트 내보내기"

#: pcbnew/tools/board_editor_control.cpp:435
msgid "KiCad board netlist files"
msgstr "KiCad 기판 네트리스트 파일"

#: pcbnew/tools/board_editor_control.cpp:449
#, c-format
msgid "Path `%s` is read only."
msgstr "`%s` 경로는 읽기 전용입니다."

#: pcbnew/tools/board_editor_control.cpp:450
msgid "I/O Error"
msgstr "I/O 오류"

#: pcbnew/tools/board_editor_control.cpp:546
#, c-format
msgid "Orphaned net %s re-parented.\n"
msgstr "고립된 네트 %s이(가) 다시 보호되었습니다.\n"

#: pcbnew/tools/board_editor_control.cpp:625
msgid "No board problems found."
msgstr "기판 문제가 발견되지 않았습니다."

#: pcbnew/tools/board_editor_control.cpp:636
msgid "Updating PCB requires a fully annotated schematic."
msgstr "PCB 업데이트를 위해서는 완전히 주석 처리된 회로도가 필요합니다."

#: pcbnew/tools/board_editor_control.cpp:650
msgid ""
"Cannot update schematic because Pcbnew is opened in stand-alone mode. In "
"order to create or update PCBs from schematics, you must launch the KiCad "
"project manager and create a project."
msgstr ""
"Pcbnew가 스탠드얼론 모드로 실행 중이기 때문에 회로도를 업데이트할 수 없습니"
"다. 회로도로부터 PCB를 생성하거나 업데이트하려면, KiCad 프로젝트 매니저를 실"
"행하여 프로젝트를 생성하세요."

#: pcbnew/tools/board_editor_control.cpp:1161
msgid "Place a footprint"
msgstr "풋프린트 배치"

#: pcbnew/tools/board_editor_control.cpp:1276 pcbnew/tools/pcb_actions.cpp:1181
msgid "Lock"
msgstr "잠금"

#: pcbnew/tools/board_editor_control.cpp:1276 pcbnew/tools/pcb_actions.cpp:1188
msgid "Unlock"
msgstr "잠금 해제"

#: pcbnew/tools/board_editor_control.cpp:1305
msgid "Zones have insufficient overlap for merging."
msgstr "영역이 병합하기에 충분하지 않습니다."

#: pcbnew/tools/board_editor_control.cpp:1351
msgid "Some zone netcodes did not match and were not merged."
msgstr "일부 영역 네트코드가 일치하지 않아 병합되지 않았습니다."

#: pcbnew/tools/board_editor_control.cpp:1357
msgid "Some zone priorities did not match and were not merged."
msgstr "일부 영역 우선 순위가 일치하지 않아 병합되지 않았습니다."

#: pcbnew/tools/board_editor_control.cpp:1363
msgid "Some zones were rule areas and were not merged."
msgstr "일부 영역은 규칙 영역이었고 병합되지 않았습니다."

#: pcbnew/tools/board_editor_control.cpp:1369
msgid "Some zone layer sets did not match and were not merged."
msgstr "일부 구역 레이어 세트가 일치하지 않아 병합되지 않았습니다."

#: pcbnew/tools/board_editor_control.cpp:1386
msgid "Some zones did not intersect and were not merged."
msgstr "일부 영역은 교차하지 않고 병합되지 않았습니다."

#: pcbnew/tools/board_editor_control.cpp:1453
#, fuzzy
msgid "Duplicate Zone"
msgstr "중복 영역"

#: pcbnew/tools/board_editor_control.cpp:1526
msgid "Selection contains no items with labeled nets."
msgstr "선택 항목에는 레이블이 지정된 네트가 있는 항목이 없습니다."

#: pcbnew/tools/board_inspection_tool.cpp:65
msgid "Net Inspection Tools"
msgstr "Net Inspection 도구"

#: pcbnew/tools/board_inspection_tool.cpp:200
#, c-format
msgid "[netclass %s]"
msgstr "[네트클래스 %s]"

#: pcbnew/tools/board_inspection_tool.cpp:211
msgid "Report incomplete: could not compile custom design rules."
msgstr "보고서 완료되지 않음: 사용자 정의 디자인 규칙을 컴파일할 수 없습니다."

#: pcbnew/tools/board_inspection_tool.cpp:316
msgid "Uncoupled Length"
msgstr "연결되지 않은 길이"

#: pcbnew/tools/board_inspection_tool.cpp:317
msgid "Diff pair uncoupled length resolution for:"
msgstr "결합되지 않은 길이의 차동 쌍 해결:"

#: pcbnew/tools/board_inspection_tool.cpp:325
#: pcbnew/tools/board_inspection_tool.cpp:926
#, c-format
msgid "Resolved max uncoupled length: %s."
msgstr "확인된 최대 비연결 길이: %s."

#: pcbnew/tools/board_inspection_tool.cpp:332
#: pcbnew/tools/board_inspection_tool.cpp:1339
msgid "Text height resolution for:"
msgstr "텍스트 높이 해법:"

#: pcbnew/tools/board_inspection_tool.cpp:340
#, c-format
msgid "Resolved height constraints: min %s; max %s."
msgstr "확인된 높이 제한: 최소 %s; 최대 %s."

#: pcbnew/tools/board_inspection_tool.cpp:347
#: pcbnew/tools/board_inspection_tool.cpp:1355
msgid "Text thickness resolution for:"
msgstr "텍스트 두께 해결:"

#: pcbnew/tools/board_inspection_tool.cpp:355
#, c-format
msgid "Resolved thickness constraints: min %s; max %s."
msgstr "확인된 두께 제약 조건: 최소 %s; 최대 %s."

#: pcbnew/tools/board_inspection_tool.cpp:362
#: pcbnew/tools/board_inspection_tool.cpp:1262
msgid "Track width resolution for:"
msgstr "다음을 위한 배선 폭 계산:"

#: pcbnew/tools/board_inspection_tool.cpp:370
#, c-format
msgid "Resolved width constraints: min %s; max %s."
msgstr "확인된 너비 제약 조건: 최소 %s; 최대 %s."

#: pcbnew/tools/board_inspection_tool.cpp:376
msgid "Connection Width"
msgstr "연결 폭"

#: pcbnew/tools/board_inspection_tool.cpp:377
msgid "Connection width resolution for:"
msgstr "연결 폭 해법:"

#: pcbnew/tools/board_inspection_tool.cpp:385
#, c-format
msgid "Resolved min connection width: %s."
msgstr "확인된 최소 연결 너비: %s."

#: pcbnew/tools/board_inspection_tool.cpp:390
#: pcbnew/tools/board_inspection_tool.cpp:1280
msgid "Via Diameter"
msgstr "비아 직경"

#: pcbnew/tools/board_inspection_tool.cpp:391
#: pcbnew/tools/board_inspection_tool.cpp:1281
msgid "Via diameter resolution for:"
msgstr "다음을 위한 비아 직경 계산:"

#: pcbnew/tools/board_inspection_tool.cpp:399
#, c-format
msgid "Resolved diameter constraints: min %s; max %s."
msgstr "확인된 직경 제약 조건: 최소 %s; 최대 %s."

#: pcbnew/tools/board_inspection_tool.cpp:405
msgid "Via Annulus"
msgstr "비아 환형 폭"

#: pcbnew/tools/board_inspection_tool.cpp:406
#: pcbnew/tools/board_inspection_tool.cpp:1298
msgid "Via annular width resolution for:"
msgstr "다음을 위한 비아 환형 폭 계산:"

#: pcbnew/tools/board_inspection_tool.cpp:414
#, c-format
msgid "Resolved annular width constraints: min %s; max %s."
msgstr "확인된 환형 폭 제약 조건: 최소 %s, 최대 %s."

#: pcbnew/tools/board_inspection_tool.cpp:421
#: pcbnew/tools/board_inspection_tool.cpp:1318
msgid "Hole Size"
msgstr "홀 크기"

#: pcbnew/tools/board_inspection_tool.cpp:422
#: pcbnew/tools/board_inspection_tool.cpp:1319
#, fuzzy
msgid "Hole size resolution for:"
msgstr "다음을 위한 홀 직경 계산:"

#: pcbnew/tools/board_inspection_tool.cpp:430
#, c-format
msgid "Resolved hole size constraints: min %s; max %s."
msgstr "확인된 구멍 크기 제약 조건: 최소 %s, 최대 %s."

#: pcbnew/tools/board_inspection_tool.cpp:436
msgid "Hole Clearance"
msgstr "구멍 유격"

#: pcbnew/tools/board_inspection_tool.cpp:437
#: pcbnew/tools/board_inspection_tool.cpp:1039
msgid "Hole clearance resolution for:"
msgstr "다음을 위한 홀 클리어런스 계산:"

#: pcbnew/tools/board_inspection_tool.cpp:445
#: pcbnew/tools/board_inspection_tool.cpp:548
msgid "Items belong to the same net. Clearance is 0."
msgstr "개체가 같은 네트에 속해 있습니다. 클리어런스는 0으로 설정됩니다."

#: pcbnew/tools/board_inspection_tool.cpp:454
#: pcbnew/tools/board_inspection_tool.cpp:474
#: pcbnew/tools/board_inspection_tool.cpp:491
#: pcbnew/tools/board_inspection_tool.cpp:506
#: pcbnew/tools/board_inspection_tool.cpp:557
#: pcbnew/tools/board_inspection_tool.cpp:577
#: pcbnew/tools/board_inspection_tool.cpp:824
#: pcbnew/tools/board_inspection_tool.cpp:838
#: pcbnew/tools/board_inspection_tool.cpp:882
#: pcbnew/tools/board_inspection_tool.cpp:980
#: pcbnew/tools/board_inspection_tool.cpp:1004
#: pcbnew/tools/board_inspection_tool.cpp:1048
#: pcbnew/tools/board_inspection_tool.cpp:1077
#: pcbnew/tools/board_inspection_tool.cpp:1116
#: pcbnew/tools/board_inspection_tool.cpp:1145
#: pcbnew/tools/board_inspection_tool.cpp:1211
#, c-format
msgid "Resolved min clearance: %s."
msgstr "확인된 최소 간격: %s."

#: pcbnew/tools/board_inspection_tool.cpp:460
#: pcbnew/tools/board_inspection_tool.cpp:1194
msgid "Physical hole clearance resolution for:"
msgstr "물리적 홀 유격 해법:"

#: pcbnew/tools/board_inspection_tool.cpp:469
#: pcbnew/tools/board_inspection_tool.cpp:1206
msgid "No 'physical_hole_clearance' constraints defined."
msgstr "'물리적 구멍 간격' 제약 조건이 정의되지 않음."

#: pcbnew/tools/board_inspection_tool.cpp:480
msgid "Hole to Hole"
msgstr "구멍 대 구멍"

#: pcbnew/tools/board_inspection_tool.cpp:481
#: pcbnew/tools/board_inspection_tool.cpp:1068
msgid "Hole-to-hole clearance resolution for:"
msgstr "구멍 대 구멍 유격 해법:"

#: pcbnew/tools/board_inspection_tool.cpp:495
msgid "Edge Clearance"
msgstr "가장자리 유격"

#: pcbnew/tools/board_inspection_tool.cpp:496
#: pcbnew/tools/board_inspection_tool.cpp:1107
msgid "Edge clearance resolution for:"
msgstr "다음을 위한 가장자리 클리어런스 계산:"

#: pcbnew/tools/board_inspection_tool.cpp:540
#: pcbnew/tools/board_inspection_tool.cpp:852
msgid "Clearance resolution for:"
msgstr "다음을 위한 클리어런스 계산:"

#: pcbnew/tools/board_inspection_tool.cpp:563
#: pcbnew/tools/board_inspection_tool.cpp:1128
msgid "Physical clearance resolution for:"
msgstr "기계적 유격 분해능:"

#: pcbnew/tools/board_inspection_tool.cpp:572
#: pcbnew/tools/board_inspection_tool.cpp:1140
msgid "No 'physical_clearance' constraints defined."
msgstr "정의된 '물리적 유격' 제약 조건이 없음."

#: pcbnew/tools/board_inspection_tool.cpp:583
#: pcbnew/tools/board_inspection_tool.cpp:1397
msgid "Assertions"
msgstr "규칙"

#: pcbnew/tools/board_inspection_tool.cpp:584
#: pcbnew/tools/board_inspection_tool.cpp:1398
msgid "Assertions for:"
msgstr "다음을 위한 규칙:"

#: pcbnew/tools/board_inspection_tool.cpp:615
msgid "Select two items for a clearance resolution report."
msgstr "클리어런스 해결 보고서를 위해 두 개체를 선택하세요."

#: pcbnew/tools/board_inspection_tool.cpp:630
#: pcbnew/tools/board_inspection_tool.cpp:643
msgid "Cannot generate clearance report on empty group."
msgstr "빈 그룹으로는 클리어런스 보고서를 생성할 수 없습니다."

#: pcbnew/tools/board_inspection_tool.cpp:658
#, fuzzy
msgid "Cannot generate clearance report on footprint with no pads."
msgstr "빈 그룹으로는 클리어런스 보고서를 생성할 수 없습니다."

#: pcbnew/tools/board_inspection_tool.cpp:673
#, fuzzy
msgid ""
"Cannot generate clearance report on footprint with multiple pads.  Select a "
"single pad."
msgstr "빈 그룹으로는 클리어런스 보고서를 생성할 수 없습니다."

#: pcbnew/tools/board_inspection_tool.cpp:729
msgid "Zone connection resolution for:"
msgstr "다음을 위한 영역 연결 해결:"

#: pcbnew/tools/board_inspection_tool.cpp:737
#, fuzzy
msgid "Thermal-relief gap resolution for:"
msgstr "단열판 갭 분해능:"

#: pcbnew/tools/board_inspection_tool.cpp:746
#, c-format
msgid "Resolved thermal relief gap: %s."
msgstr "확인된 단열판 간격: %s."

#: pcbnew/tools/board_inspection_tool.cpp:751
#, fuzzy
msgid "Thermal-relief spoke width resolution for:"
msgstr "단열판 갭 분해능:"

#: pcbnew/tools/board_inspection_tool.cpp:760
#, c-format
msgid "Resolved spoke width: %s."
msgstr "확인된 스포크 너비: %s."

#: pcbnew/tools/board_inspection_tool.cpp:765
#, fuzzy
msgid "Thermal-relief min spoke count resolution for:"
msgstr "단열판 갭 분해능:"

#: pcbnew/tools/board_inspection_tool.cpp:774
#, c-format
msgid "Resolved min spoke count: %d."
msgstr "확인된 최소 스포크 수: %d."

#: pcbnew/tools/board_inspection_tool.cpp:783
#: pcbnew/tools/board_inspection_tool.cpp:831
msgid "Zone clearance resolution for:"
msgstr "구역 클리어런스 해결:"

#: pcbnew/tools/board_inspection_tool.cpp:787
#, c-format
msgid "Zone clearance: %s."
msgstr "구역 클리어런스: %s."

#: pcbnew/tools/board_inspection_tool.cpp:797
#, c-format
msgid "Overridden by larger physical clearance from %s;clearance: %s."
msgstr "%s로 더 큰 물리적 유격에 의해 재정의 됨; 유격: %s."

#: pcbnew/tools/board_inspection_tool.cpp:813
#, fuzzy, c-format
msgid "Overridden by larger physical hole clearance from %s; clearance: %s."
msgstr "%s에서 더 큰 물리적 구멍 간격으로 재정의됨; 간격: %s."

#: pcbnew/tools/board_inspection_tool.cpp:857
#, fuzzy
msgid "Items belong to the same net. Min clearance is 0."
msgstr "개체가 같은 네트에 속해 있습니다. 클리어런스는 0으로 설정됩니다."

#: pcbnew/tools/board_inspection_tool.cpp:872
#, fuzzy
msgid "Min clearance is 0."
msgstr "클리어런스: %s."

#: pcbnew/tools/board_inspection_tool.cpp:876
#, c-format
msgid "Resolved clearance: %s; clearance will not be tested."
msgstr "확인된 클리어런스: %s; 클리어런스는 테스트되지 않음."

#: pcbnew/tools/board_inspection_tool.cpp:899
msgid "Diff Pair"
msgstr "차동 쌍"

#: pcbnew/tools/board_inspection_tool.cpp:900
#, fuzzy
msgid "Diff-pair gap resolution for:"
msgstr "차동 쌍 간격 해결:"

#: pcbnew/tools/board_inspection_tool.cpp:905
#, c-format
msgid "Resolved gap constraints: min %s; opt %s; max %s."
msgstr "확인된 간격 제약조건: 최소 %s; 최적 %s; 최대 %s."

#: pcbnew/tools/board_inspection_tool.cpp:913
#, fuzzy
msgid "Diff-pair max uncoupled length resolution for:"
msgstr "최대 길이를 벗어난 차동 쌍 해결:"

#: pcbnew/tools/board_inspection_tool.cpp:919
msgid "No 'diff_pair_uncoupled' constraints defined."
msgstr "정의된 '차동 쌍 연결 해제' 제약 조건이 없음."

#: pcbnew/tools/board_inspection_tool.cpp:950
#, c-format
msgid "Note: %s is tented; clearance will only be applied to holes."
msgstr "참고 : %s는 텐트입니다. 클리어런스는 구멍(holes)에만 적용됩니다."

#: pcbnew/tools/board_inspection_tool.cpp:967
msgid "Silkscreen clearance resolution for:"
msgstr "다음을 위한 실크스크린 클리어런스 계산:"

#: pcbnew/tools/board_inspection_tool.cpp:995
msgid "Courtyard clearance resolution for:"
msgstr "다음을 위한 부품자리 클리어런스 해결:"

#: pcbnew/tools/board_inspection_tool.cpp:1123
msgid "Physical Clearances"
msgstr "물리적 허용 범위"

#: pcbnew/tools/board_inspection_tool.cpp:1238
msgid "Select an item for a constraints resolution report."
msgstr "제약 조건 해결 보고서 항목을 선택하세요."

#: pcbnew/tools/board_inspection_tool.cpp:1270
#, c-format
msgid "Resolved width constraints: min %s; opt %s; max %s."
msgstr "확인된 너비 제약 조건: 최소 %s; 최적 %s; 최대 %s."

#: pcbnew/tools/board_inspection_tool.cpp:1290
#, c-format
msgid "Resolved diameter constraints: min %s; opt %s; max %s."
msgstr "확인된 지름 제약 조건: 최소 %s; 최적 %s; 최대 %s."

#: pcbnew/tools/board_inspection_tool.cpp:1297
msgid "Via Annular Width"
msgstr "비아 환형 폭"

#: pcbnew/tools/board_inspection_tool.cpp:1307
#, c-format
msgid "Resolved annular width constraints: min %s; opt %s; max %s."
msgstr "확인된 환형 폭 제약 조건: 최소 %s; 최적 %s; 최대 %s."

#: pcbnew/tools/board_inspection_tool.cpp:1328
#, c-format
msgid "Resolved hole size constraints: min %s; opt %s; max %s."
msgstr "확인된 구멍 크기 제약 조건: 최소 %s; 최적 %s; 최대 %s."

#: pcbnew/tools/board_inspection_tool.cpp:1347
#, c-format
msgid "Resolved height constraints: min %s; opt %s; max %s."
msgstr "확인된 높이 제약 조건: 최소 %s; 최적 %s; 최대 %s."

#: pcbnew/tools/board_inspection_tool.cpp:1363
#, c-format
msgid "Resolved thickness constraints: min %s; opt %s; max %s."
msgstr "확인된 두께 제약 조건: 최소 %s; 최적 %s; 최대 %s."

#: pcbnew/tools/board_inspection_tool.cpp:1371
msgid "Keepouts"
msgstr "킵아웃"

#: pcbnew/tools/board_inspection_tool.cpp:1372
msgid "Keepout resolution for:"
msgstr "다음을 위한 킵아웃 계산:"

#: pcbnew/tools/board_inspection_tool.cpp:1382
#: pcbnew/tools/board_inspection_tool.cpp:1406
msgid "Report may be incomplete: some footprint courtyards are malformed."
msgstr "보고서가 불완전할 수 있음: 일부 풋프린트 부품자리가 잘못되었습니다."

#: pcbnew/tools/board_inspection_tool.cpp:1384
#: pcbnew/tools/board_inspection_tool.cpp:1408
msgid "Run DRC for a full analysis."
msgstr "전체 분석을 위해 DRC를 실행시킵니다."

#: pcbnew/tools/board_inspection_tool.cpp:1391
msgid "Item <b>disallowed</b> at current location."
msgstr "현재 경로에서 항목이 <b>사용 불가능</b>합니다."

#: pcbnew/tools/board_inspection_tool.cpp:1393
msgid "Item allowed at current location."
msgstr "현재 경로에서 항목이 사용 가능합니다."

#: pcbnew/tools/board_inspection_tool.cpp:1446
#, fuzzy
msgid "Select a footprint to diff with its library equivalent."
msgstr "라이브러리에 대한 보드 풋프린트 확인 중..."

#: pcbnew/tools/board_inspection_tool.cpp:1464
msgid "Select a footprint for a footprint associations report."
msgstr "풋프린트 연결 보고서에서 풋프린트를 선택하세요."

#: pcbnew/tools/board_inspection_tool.cpp:1491
#, fuzzy
msgid "Board vs library diff for:"
msgstr "라이브러리 파일:"

#: pcbnew/tools/board_inspection_tool.cpp:1514
#: pcbnew/tools/board_inspection_tool.cpp:1522
msgid "Manage Footprint Libraries"
msgstr "풋프린트 라이브러리 관리"

#: pcbnew/tools/convert_tool.cpp:77
msgid "Copy line width of first object"
msgstr "첫 번째 개체의 선 너비 복사"

#: pcbnew/tools/convert_tool.cpp:98
msgid "Gap:"
msgstr "간격:"

#: pcbnew/tools/convert_tool.cpp:263
msgid "Create from Selection"
msgstr "선택 항목 생성"

#: pcbnew/tools/convert_tool.cpp:422
msgid "Could not convert selection"
msgstr "선택 항목을 변환할 수 없음"

#: pcbnew/tools/convert_tool.cpp:422
#, fuzzy
msgid "Objects must form a closed shape"
msgstr "(닫혀 있지 않은 모양)"

#: pcbnew/tools/convert_tool.cpp:533
msgid "Convert to Polygon"
msgstr "다각형으로 변환"

#: pcbnew/tools/convert_tool.cpp:535
#, fuzzy
msgid "Create Polygon"
msgstr "영역 만들기"

#: pcbnew/tools/convert_tool.cpp:540
#, fuzzy
msgid "Convert to Zone"
msgstr "선으로 변환"

#: pcbnew/tools/convert_tool.cpp:542
#, fuzzy
msgid "Create Zone"
msgstr "영역 만들기"

#: pcbnew/tools/convert_tool.cpp:1109
#, fuzzy
msgid "Create Lines"
msgstr "목록 작성 (&C)"

#: pcbnew/tools/convert_tool.cpp:1196
#, fuzzy
msgid "Create Arc"
msgstr "배열 생성"

#: pcbnew/tools/drawing_stackup_table_tool.cpp:246
msgid "Layer Name"
msgstr "레이어 이름"

#: pcbnew/tools/drawing_stackup_table_tool.cpp:261
msgid "Thickness (mm)"
msgstr "두께 (mm)"

#: pcbnew/tools/drawing_stackup_table_tool.cpp:262
msgid "Thickness (inches)"
msgstr "두께 (인치)"

#: pcbnew/tools/drawing_stackup_table_tool.cpp:263
msgid "Thickness (mils)"
msgstr "두께 (마일)"

#: pcbnew/tools/drawing_stackup_table_tool.cpp:278
msgid "Loss Tangent"
msgstr "손실 접선"

#: pcbnew/tools/drawing_stackup_table_tool.cpp:301
msgid "Dielectric"
msgstr "유전체"

#: pcbnew/tools/drawing_stackup_table_tool.cpp:354
msgid "Insert board stackup table"
msgstr "기판 스택업 테이블 삽입"

#: pcbnew/tools/drawing_stackup_table_tool.cpp:398
msgid "BOARD CHARACTERISTICS"
msgstr "기판 특성"

#: pcbnew/tools/drawing_stackup_table_tool.cpp:413
msgid "Copper Layer Count: "
msgstr "구리 레이어 수: "

#: pcbnew/tools/drawing_stackup_table_tool.cpp:425
msgid "Board overall dimensions: "
msgstr "보드 전체 치수 : "

#: pcbnew/tools/drawing_stackup_table_tool.cpp:435
msgid "Min track/spacing: "
msgstr "최소 배선/간격: "

#: pcbnew/tools/drawing_stackup_table_tool.cpp:445
msgid "Copper Finish: "
msgstr "구리 마감: "

#: pcbnew/tools/drawing_stackup_table_tool.cpp:453
msgid "Castellated pads: "
msgstr "카스텔레이티드 패드: "

#: pcbnew/tools/drawing_stackup_table_tool.cpp:461
msgid "Board Thickness: "
msgstr "보드 두께: "

#: pcbnew/tools/drawing_stackup_table_tool.cpp:475
msgid "Min hole diameter: "
msgstr "최소 홀 직경: "

#: pcbnew/tools/drawing_stackup_table_tool.cpp:484
msgid "Impedance Control: "
msgstr "임피던스 제어: "

#: pcbnew/tools/drawing_stackup_table_tool.cpp:492
msgid "Plated Board Edge: "
msgstr "도금 된 보드 가장자리: "

#: pcbnew/tools/drawing_stackup_table_tool.cpp:500
msgid "Edge card connectors: "
msgstr "에지 카드 커넥터: "

#: pcbnew/tools/drawing_stackup_table_tool.cpp:508
msgid "Yes, Bevelled"
msgstr "예, 경사진"

#: pcbnew/tools/drawing_tool.cpp:89
msgid "Select Via Size"
msgstr "크기를 통해 선택"

#: pcbnew/tools/drawing_tool.cpp:362 pcbnew/tools/drawing_tool.cpp:2041
#: pcbnew/tools/pcb_actions.cpp:100
msgid "Draw Line"
msgstr "선 그리기"

#: pcbnew/tools/drawing_tool.cpp:426
#, fuzzy
msgid "Draw Text Box"
msgstr "텍스트 상자 그리기"

#: pcbnew/tools/drawing_tool.cpp:426 pcbnew/tools/pcb_actions.cpp:119
msgid "Draw Rectangle"
msgstr "사각형 그리기"

#: pcbnew/tools/drawing_tool.cpp:474 pcbnew/tools/pcb_actions.cpp:129
msgid "Draw Circle"
msgstr "원 그리기"

#: pcbnew/tools/drawing_tool.cpp:521 pcbnew/tools/pcb_actions.cpp:139
msgid "Draw Arc"
msgstr "원호 그리기"

#: pcbnew/tools/drawing_tool.cpp:722
#, fuzzy
msgid "Place Image"
msgstr "이미지 배치"

#: pcbnew/tools/drawing_tool.cpp:961
#, fuzzy
msgid "Place Text"
msgstr "시트 설치"

#: pcbnew/tools/drawing_tool.cpp:1288
#, fuzzy
msgid "Draw Dimension"
msgstr "치수선 그리기"

#: pcbnew/tools/drawing_tool.cpp:1747
#, fuzzy
msgid "Move Footprint Anchor"
msgstr "풋프린트 앵커 배치"

#: pcbnew/tools/drawing_tool.cpp:3028
#, fuzzy
msgid "Select Net:"
msgstr "선택한 네트:"

#: pcbnew/tools/drawing_tool.cpp:3200
msgid "Via location violates DRC."
msgstr "비아 위치가 DRC를 위반합니다."

#: pcbnew/tools/drawing_tool.cpp:3409
msgid "Place via"
msgstr "비아 설치 (V)"

#: pcbnew/tools/drc_tool.cpp:151
msgid "Refilling all zones..."
msgstr "모든 영역을 다시 채우는 중..."

#: pcbnew/tools/drc_tool.cpp:160
msgid "Schematic parity tests require a fully annotated schematic."
msgstr "회로도의 동등성 테스트에는 완전히 주석 처리된 회로도가 필요합니다."

#: pcbnew/tools/edit_tool.cpp:99
msgid "Positioning Tools"
msgstr "포지셔닝 도구"

#: pcbnew/tools/edit_tool.cpp:120
#, fuzzy
msgid "Shape Modification"
msgstr "형상 설정"

#: pcbnew/tools/edit_tool.cpp:547
#, c-format
msgid "Unable to resize arc tracks of %s or greater."
msgstr "%s 이상의 호 배선의 크기를 조정할 수 없습니다."

#: pcbnew/tools/edit_tool.cpp:881
msgid "Drag Arc Track"
msgstr "호 배선 그리기"

#: pcbnew/tools/edit_tool.cpp:945
msgid "Edit track width/via size"
msgstr "배선 너비/크기를 통해 편집"

#: pcbnew/tools/edit_tool.cpp:980
msgid "At least two straight track segments must be selected."
msgstr "최소한 두 개의 직선 배선 세그먼트가 선택되어야 합니다."

#: pcbnew/tools/edit_tool.cpp:984 pcbnew/tools/edit_tool.cpp:1149
#: pcbnew/tools/pcb_actions.cpp:601
msgid "Fillet Tracks"
msgstr "배선 모깍기"

#: pcbnew/tools/edit_tool.cpp:984 pcbnew/tools/edit_tool.cpp:1176
msgid "Enter fillet radius:"
msgstr "모깍기 반경을 입력:"

#: pcbnew/tools/edit_tool.cpp:994 pcbnew/tools/edit_tool.cpp:1186
msgid ""
"A radius of zero was entered.\n"
"The fillet operation was not performed."
msgstr ""
"반경에 0이 입력되었습니다.\n"
"모깍기 작업은 수행되지 않습니다."

#: pcbnew/tools/edit_tool.cpp:1156
msgid "Unable to fillet the selected track segments."
msgstr "선택한 배선 세그먼트를 모깍기 할 수 없습니다."

#: pcbnew/tools/edit_tool.cpp:1158
msgid "Some of the track segments could not be filleted."
msgstr "일부 배선 세그먼트를 모깍기 할 수 없습니다."

#: pcbnew/tools/edit_tool.cpp:1176
#: pcbnew/tools/item_modification_routine.cpp:63
msgid "Fillet Lines"
msgstr "모깍기 라인"

#: pcbnew/tools/edit_tool.cpp:1210
#: pcbnew/tools/item_modification_routine.cpp:175
msgid "Chamfer Lines"
msgstr "모따기 선"

#: pcbnew/tools/edit_tool.cpp:1210
#, fuzzy
msgid "Enter chamfer setback:"
msgstr "모따기 거리:"

#: pcbnew/tools/edit_tool.cpp:1224
#, fuzzy
msgid ""
"A setback of zero was entered.\n"
"The chamfer operation was not performed."
msgstr ""
"반경에 0이 입력되었습니다.\n"
"모깍기 작업은 수행되지 않습니다."

#: pcbnew/tools/edit_tool.cpp:1316
msgid "A shape with least two lines must be selected."
msgstr "두 개 이상의 선이 있는 도형을 선택해야 합니다."

#: pcbnew/tools/edit_tool.cpp:1391
#, fuzzy
msgid "Exactly two lines must be selected to extend them."
msgstr "두 개 이상의 선이 있는 도형을 선택해야 합니다."

#: pcbnew/tools/edit_tool.cpp:1488 pcbnew/tools/pcb_actions.cpp:621
#, fuzzy
msgid "Heal Shapes"
msgstr "전역 라벨 모양"

#: pcbnew/tools/edit_tool.cpp:1488
msgid "Tolerance value:"
msgstr "공차 값:"

#: pcbnew/tools/edit_tool.cpp:1525
msgid "Heal shapes"
msgstr "형상 복구"

#: pcbnew/tools/edit_tool.cpp:2093 pcbnew/tools/pcb_actions.cpp:550
msgid "Change Side / Flip"
msgstr "배치면 변경 / 반전"

#: pcbnew/tools/edit_tool.cpp:2405
msgid "Move exact"
msgstr "수치 지정 후 이동"

#: pcbnew/tools/edit_tool.cpp:2558
#, c-format
msgid "Duplicated %d item(s)"
msgstr "중복된 %d개 항목"

#: pcbnew/tools/edit_tool.cpp:2785
msgid "Select reference point for the copy..."
msgstr "복사본에 대한 참조점 선택..."

#: pcbnew/tools/edit_tool.cpp:2786 pcbnew/tools/edit_tool.cpp:2803
msgid "Selection copied"
msgstr "선택 항목이 복사됨"

#: pcbnew/tools/edit_tool.cpp:2787
msgid "Copy canceled"
msgstr "복사 취소됨"

#: pcbnew/tools/edit_tool_move_fct.cpp:201
msgid "Pack footprints"
msgstr "풋프린트 잠금"

#: pcbnew/tools/edit_tool_move_fct.cpp:326
#, c-format
msgid ""
"Click to place %s (item %zu of %zu)\n"
"Press <esc> to cancel all; double-click to finish"
msgstr ""
"클릭하여 배치 %s(항목 %zu 의 %zu)\n"
"모두 취소는 <esc> ; 완료는 더블클릭"

#: pcbnew/tools/edit_tool_move_fct.cpp:339
#, c-format
msgid "%s pad %s"
msgstr "%s 패드 %s"

#: pcbnew/tools/edit_tool_move_fct.cpp:375
msgid "Select reference point for move..."
msgstr "이동할 기준점 선택..."

#: pcbnew/tools/footprint_editor_control.cpp:364
msgid "_copy"
msgstr "_복사"

#: pcbnew/tools/footprint_editor_control.cpp:406
msgid "Change Footprint Name"
msgstr "풋프린트 이름 변경"

#: pcbnew/tools/footprint_editor_control.cpp:766
msgid "No footprint problems found."
msgstr "풋프린트 문제가 발견되지 않았습니다."

#: pcbnew/tools/generator_tool.cpp:173
#, fuzzy
msgid "Regenerate All"
msgstr "모두 삭제"

#: pcbnew/tools/generator_tool.cpp:180
#, c-format
msgid "Update %s"
msgstr "업데이트 %s"

#: pcbnew/tools/generator_tool.cpp:235
#, fuzzy
msgid "Regenerate Selected"
msgstr "경로 해제 선택됨"

#: pcbnew/tools/generator_tool.cpp:254
#, fuzzy
msgid "Regenerate Item"
msgstr "반복 항목"

#: pcbnew/tools/group_tool.cpp:44
msgid "Grouping"
msgstr "그룹화"

#: pcbnew/tools/group_tool.cpp:65
msgid "Group is in inconsistent state:"
msgstr "그룹의 상태가 일관되지 않습니다:"

#: pcbnew/tools/group_tool.cpp:144
msgid "Click on new member..."
msgstr "새로운 멤버를 클릭하세요..."

#: pcbnew/tools/group_tool.cpp:278 pcbnew/tools/pcb_actions.cpp:1195
msgid "Group Items"
msgstr "그룹 항목"

#: pcbnew/tools/group_tool.cpp:319 pcbnew/tools/pcb_actions.cpp:1202
#, fuzzy
msgid "Ungroup Items"
msgstr "그룹 해제"

#: pcbnew/tools/item_modification_routine.cpp:71
msgid "Unable to fillet the selected lines."
msgstr "선택한 선을 모깎기할 수 없습니다."

#: pcbnew/tools/item_modification_routine.cpp:75
msgid "Some of the lines could not be filleted."
msgstr "일부 선을 모깎기할 수 없습니다."

#: pcbnew/tools/item_modification_routine.cpp:183
#, fuzzy
msgid "Unable to chamfer the selected lines."
msgstr "선택한 선을 모깎기할 수 없습니다."

#: pcbnew/tools/item_modification_routine.cpp:187
#, fuzzy
msgid "Some of the lines could not be chamfered."
msgstr "일부 선을 모깎기할 수 없습니다."

#: pcbnew/tools/item_modification_routine.cpp:242
#: pcbnew/tools/pcb_actions.cpp:628
msgid "Extend Lines to Meet"
msgstr "만날 선 연장"

#: pcbnew/tools/item_modification_routine.cpp:250
#, fuzzy
msgid "Unable to extend the selected lines to meet."
msgstr "선택한 선을 모깎기할 수 없습니다."

#: pcbnew/tools/item_modification_routine.cpp:254
#, fuzzy
msgid "Some of the lines could not be extended to meet."
msgstr "일부 선을 모깎기할 수 없습니다."

#: pcbnew/tools/item_modification_routine.cpp:382
msgid "Merge polygons."
msgstr "다각형 병합."

#: pcbnew/tools/item_modification_routine.cpp:390
#, fuzzy
msgid "Unable to merge the selected polygons."
msgstr "선택한 선을 모깎기할 수 없습니다."

#: pcbnew/tools/item_modification_routine.cpp:394
#, fuzzy
msgid "Some of the polygons could not be merged."
msgstr "일부 선을 모깎기할 수 없습니다."

#: pcbnew/tools/item_modification_routine.cpp:420
msgid "Subtract polygons."
msgstr "다각형 빼기."

#: pcbnew/tools/item_modification_routine.cpp:428
#, fuzzy
msgid "Unable to subtract the selected polygons."
msgstr "선택한 선을 모깎기할 수 없습니다."

#: pcbnew/tools/item_modification_routine.cpp:432
#, fuzzy
msgid "Some of the polygons could not be subtracted."
msgstr "일부 선을 모깎기할 수 없습니다."

#: pcbnew/tools/item_modification_routine.cpp:461
msgid "Intersect polygons."
msgstr "다각형 교차하기."

#: pcbnew/tools/item_modification_routine.cpp:469
#, fuzzy
msgid "Unable to intersect the selected polygons."
msgstr "선택한 선을 모깎기할 수 없습니다."

#: pcbnew/tools/item_modification_routine.cpp:473
#, fuzzy
msgid "Some of the polygons could not be intersected."
msgstr "일부 선을 모깎기할 수 없습니다."

#: pcbnew/tools/pad_tool.cpp:162
msgid "Paste Pad Properties"
msgstr "패드 속성 붙여넣기"

#: pcbnew/tools/pad_tool.cpp:269
msgid "Push Pad Settings"
msgstr "푸시 패드 설정"

#: pcbnew/tools/pad_tool.cpp:374
#, c-format
msgid ""
"Click on pad %s\n"
"Press <esc> to cancel all; double-click to finish"
msgstr ""
"패드 %s 클릭\n"
"모두 취소는 <esc>; 더블클릭은 완료"

#: pcbnew/tools/pad_tool.cpp:401 pcbnew/tools/pad_tool.cpp:499
msgid "Renumber pads"
msgstr "패드 번호 다시 매기기"

#: pcbnew/tools/pad_tool.cpp:638
msgid "Place pad"
msgstr "패드 배치"

#: pcbnew/tools/pad_tool.cpp:670 pcbnew/tools/pad_tool.cpp:683
#, fuzzy
msgid "Edit Pad"
msgstr "패드 편집"

#: pcbnew/tools/pad_tool.cpp:757
#, c-format
msgid "Pad Edit Mode.  Press %s again to exit."
msgstr "패드 편집 모드.  %s을(를) 다시 눌러 종료하세요."

#: pcbnew/tools/pad_tool.cpp:762
#, c-format
msgid "Pad Edit Mode.  Press %s to exit."
msgstr "패드 편집 모드.  %s을(를) 눌러 종료하세요."

#: pcbnew/tools/pcb_actions.cpp:53
msgid "Create Polygon from Selection..."
msgstr "선택에서 다각형 만들기..."

#: pcbnew/tools/pcb_actions.cpp:54
msgid "Creates a graphic polygon from the selection"
msgstr "다각형 그래픽 생성"

#: pcbnew/tools/pcb_actions.cpp:60
msgid "Create Zone from Selection..."
msgstr "선택 범위에서 영역 만들기..."

#: pcbnew/tools/pcb_actions.cpp:61
msgid "Creates a copper zone from the selection"
msgstr "구리 영역 생성"

#: pcbnew/tools/pcb_actions.cpp:67
msgid "Create Rule Area from Selection..."
msgstr "선택 범위에서 규칙 영역 만들기..."

#: pcbnew/tools/pcb_actions.cpp:68
msgid "Creates a rule area from the selection"
msgstr "규칙 영역 생성"

#: pcbnew/tools/pcb_actions.cpp:74
msgid "Create Lines from Selection..."
msgstr "선택 항목에서 선 생성..."

#: pcbnew/tools/pcb_actions.cpp:75
msgid "Creates graphic lines from the selection"
msgstr "선택 영역에서 그래픽 선 생성"

#: pcbnew/tools/pcb_actions.cpp:81
msgid "Create Arc from Selection"
msgstr "선택 범위에서 호 생성"

#: pcbnew/tools/pcb_actions.cpp:82
msgid "Creates an arc from the selected line segment"
msgstr "선택한 선 세그먼트에서 호 생성"

#: pcbnew/tools/pcb_actions.cpp:88
msgid "Create Tracks from Selection"
msgstr "선택 범위에서 배선 생성"

#: pcbnew/tools/pcb_actions.cpp:89
msgid "Creates tracks from the selected graphic lines"
msgstr "선택한 그래픽 선으로부터 배선 생성"

#: pcbnew/tools/pcb_actions.cpp:101
msgid "Draw a line"
msgstr "선 그리기"

#: pcbnew/tools/pcb_actions.cpp:110
msgid "Draw Graphic Polygon"
msgstr "그래픽 폴리곤 그리기"

#: pcbnew/tools/pcb_actions.cpp:111
msgid "Draw a graphic polygon"
msgstr "그래픽 다각형 그리기"

#: pcbnew/tools/pcb_actions.cpp:120
msgid "Draw a rectangle"
msgstr "직사각형 그리기"

#: pcbnew/tools/pcb_actions.cpp:130
msgid "Draw a circle"
msgstr "원 그리기"

#: pcbnew/tools/pcb_actions.cpp:140
msgid "Draw an arc"
msgstr "호 그리기"

#: pcbnew/tools/pcb_actions.cpp:148
msgid "Add Board Characteristics"
msgstr "보드 특성 추가"

#: pcbnew/tools/pcb_actions.cpp:149
msgid "Add a board characteristics table on a graphic layer"
msgstr "그래픽 레이어 기판의 특성 표를 추가합니다"

#: pcbnew/tools/pcb_actions.cpp:156
msgid "Add Stackup Table"
msgstr "스택업 테이블 추가"

#: pcbnew/tools/pcb_actions.cpp:157
msgid "Add a board stackup table on a graphic layer"
msgstr "그래픽 레이어에 기판 스택업 테이블 추가"

#: pcbnew/tools/pcb_actions.cpp:163
msgid "Add Reference Image"
msgstr "참조 이미지 추가"

#: pcbnew/tools/pcb_actions.cpp:164
msgid ""
"Add a bitmap image to be used as a reference (image will not be included in "
"any output)"
msgstr ""
"참조로 사용할 비트맵 이미지를 추가합니다 (이미지는 출력에 포함되지 않음)"

#: pcbnew/tools/pcb_actions.cpp:183
msgid "Add a wrapped text item"
msgstr "래핑된 텍스트 항목 추가"

#: pcbnew/tools/pcb_actions.cpp:192
msgid "Increase Spacing"
msgstr "간격 늘리기"

#: pcbnew/tools/pcb_actions.cpp:193
#, fuzzy
msgid "Increase tuning pattern spacing by one step."
msgstr "미앤더 간격을 한 단계씩 증가시킵니다."

#: pcbnew/tools/pcb_actions.cpp:201
msgid "Decrease Spacing"
msgstr "간격 줄이기"

#: pcbnew/tools/pcb_actions.cpp:202
#, fuzzy
msgid "Decrease tuning pattern spacing by one step."
msgstr "미앤더 간격을 한 단계씩 감소시킵니다."

#: pcbnew/tools/pcb_actions.cpp:210
msgid "Increase Amplitude"
msgstr "진폭 증가"

#: pcbnew/tools/pcb_actions.cpp:211
#, fuzzy
msgid "Increase tuning pattern amplitude by one step."
msgstr "미앤더 진폭을 한 단계씩 증가시킵니다."

#: pcbnew/tools/pcb_actions.cpp:219
msgid "Decrease Amplitude"
msgstr "진폭 감소"

#: pcbnew/tools/pcb_actions.cpp:220
#, fuzzy
msgid "Decrease tuning pattern amplitude by one step."
msgstr "미앤더 진폭을 한 단계씩 감소시킵니다."

#: pcbnew/tools/pcb_actions.cpp:229
msgid "Add Aligned Dimension"
msgstr "정렬된 치수선 추가"

#: pcbnew/tools/pcb_actions.cpp:230
msgid "Add an aligned linear dimension"
msgstr "정렬된 선형 치수선 추가"

#: pcbnew/tools/pcb_actions.cpp:237
msgid "Add Center Dimension"
msgstr "중심 치수선 추가"

#: pcbnew/tools/pcb_actions.cpp:238
msgid "Add a center dimension"
msgstr "중심 치수선 추가"

#: pcbnew/tools/pcb_actions.cpp:245
msgid "Add Radial Dimension"
msgstr "방사형 치수 추가"

#: pcbnew/tools/pcb_actions.cpp:246
msgid "Add a radial dimension"
msgstr "방사형 치수 추가"

#: pcbnew/tools/pcb_actions.cpp:253
msgid "Add Orthogonal Dimension"
msgstr "대각 치수선 추가"

#: pcbnew/tools/pcb_actions.cpp:254
msgid "Add an orthogonal dimension"
msgstr "대각 치수선 추가"

#: pcbnew/tools/pcb_actions.cpp:261
msgid "Add Leader"
msgstr "지시선 추가"

#: pcbnew/tools/pcb_actions.cpp:262
msgid "Add a leader dimension"
msgstr "리더 치수선 추가"

#: pcbnew/tools/pcb_actions.cpp:275
msgid "Add Filled Zone"
msgstr "채움 영역 추가"

#: pcbnew/tools/pcb_actions.cpp:276
msgid "Add a filled zone"
msgstr "채움 영역 추가"

#: pcbnew/tools/pcb_actions.cpp:286
msgid "Add Vias"
msgstr "비아 추가"

#: pcbnew/tools/pcb_actions.cpp:287
msgid "Add free-standing vias"
msgstr "독립형 비아를 추가"

#: pcbnew/tools/pcb_actions.cpp:296
msgid "Add Rule Area"
msgstr "규칙 영역 추가"

#: pcbnew/tools/pcb_actions.cpp:297
msgid "Add a rule area (keepout)"
msgstr "규칙 영역 (킵아웃) 추가"

#: pcbnew/tools/pcb_actions.cpp:307
msgid "Add a Zone Cutout"
msgstr "영역 컷아웃을 추가"

#: pcbnew/tools/pcb_actions.cpp:308
msgid "Add a cutout area of an existing zone"
msgstr "기존 영역에 새 컷아웃 영역 추가"

#: pcbnew/tools/pcb_actions.cpp:318
msgid "Add a Similar Zone"
msgstr "유사 영역을 추가"

#: pcbnew/tools/pcb_actions.cpp:319
msgid "Add a zone with the same settings as an existing zone"
msgstr "이미 존재하는 영역의 설정과 동일한 설정의 영역 추가"

#: pcbnew/tools/pcb_actions.cpp:339
msgid "Place the Footprint Anchor"
msgstr "풋프린트 앵커 배치"

#: pcbnew/tools/pcb_actions.cpp:340
msgid "Set the coordinate origin point (anchor) of the footprint"
msgstr "풋프린트의 좌표 원점 (앵커) 설정"

#: pcbnew/tools/pcb_actions.cpp:349
msgid "Increase Line Width"
msgstr "라인 너비 늘리기"

#: pcbnew/tools/pcb_actions.cpp:350
msgid "Increase the line width"
msgstr "선의 폭 늘리기"

#: pcbnew/tools/pcb_actions.cpp:357
msgid "Decrease Line Width"
msgstr "라인 너비 줄이기"

#: pcbnew/tools/pcb_actions.cpp:358
msgid "Decrease the line width"
msgstr "라인 너비 줄이기"

#: pcbnew/tools/pcb_actions.cpp:365
msgid "Switch Arc Posture"
msgstr "호의 모양 전환"

#: pcbnew/tools/pcb_actions.cpp:366
msgid "Switch the arc posture"
msgstr "호의 모양을 전환합니다"

#: pcbnew/tools/pcb_actions.cpp:372
msgid "Snap to Objects on the Active Layer Only"
msgstr "활성 레이어의 개체에만 스냅"

#: pcbnew/tools/pcb_actions.cpp:373
msgid "Enables snapping to objects on the active layer only"
msgstr "활성 레이어의 개체에만 스냅을 활성화함"

#: pcbnew/tools/pcb_actions.cpp:378
#, fuzzy
msgid "Snap to Objects on All Layers"
msgstr "Edge.Cuts를 모든 레이어에 플롯"

#: pcbnew/tools/pcb_actions.cpp:379
#, fuzzy
msgid "Enables snapping to objects on all visible layers"
msgstr "표시 레이어의 개체에만 연결선 표시"

#: pcbnew/tools/pcb_actions.cpp:385
#, fuzzy
msgid "Toggle Snapping Between Active and All Layers"
msgstr "활성 레이어와 모든 레이어 간 스냅 전환"

#: pcbnew/tools/pcb_actions.cpp:386
msgid "Toggles between snapping on all visible layers and only the active area"
msgstr "모든 가시 레이어와 활성 영역 사이에서 스냅 전환"

#: pcbnew/tools/pcb_actions.cpp:392
msgid "Delete Last Point"
msgstr "마지막 점 삭제"

#: pcbnew/tools/pcb_actions.cpp:393
msgid "Delete the last point added to the current item"
msgstr "현재 개체의 마지막으로 추가된 점 삭제"

#: pcbnew/tools/pcb_actions.cpp:399
msgid "Close Outline"
msgstr "외곽선 닫기"

#: pcbnew/tools/pcb_actions.cpp:400
msgid "Close the in progress outline"
msgstr "작성중인 외곽선을 닫습니다"

#: pcbnew/tools/pcb_actions.cpp:409
msgid "Show the design rules checker window"
msgstr "디자인 규칙 검사기 창 표시"

#: pcbnew/tools/pcb_actions.cpp:420
msgid "Open in Footprint Editor"
msgstr "풋프린트 편집기에서 열기"

#: pcbnew/tools/pcb_actions.cpp:421 pcbnew/tools/pcb_actions.cpp:429
msgid "Opens the selected footprint in the Footprint Editor"
msgstr "선택한 풋프린트를 풋프린트 편집기에서 열기"

#: pcbnew/tools/pcb_actions.cpp:438
msgid ""
"Selects a footprint by reference designator and places it under the cursor "
"for moving"
msgstr "참조 지정자로 풋프린트를 선택하여, 이동을 위해 커서 아래에 배치"

#: pcbnew/tools/pcb_actions.cpp:457
msgid "Move Individually"
msgstr "개별적으로 이동"

#: pcbnew/tools/pcb_actions.cpp:458
msgid "Moves the selected items one-by-one"
msgstr "선택한 항목을 하나씩 이동"

#: pcbnew/tools/pcb_actions.cpp:466
msgid "Move with Reference"
msgstr "레퍼런스에 따라 이동"

#: pcbnew/tools/pcb_actions.cpp:467
msgid "Moves the selected item(s) with a specified starting point"
msgstr "지정된 시작점으로 선택한 항목을 이동합니다"

#: pcbnew/tools/pcb_actions.cpp:475
msgid "Copy with Reference"
msgstr "레퍼런스에 따라 복사"

#: pcbnew/tools/pcb_actions.cpp:476
msgid "Copy selected item(s) to clipboard with a specified starting point"
msgstr "선택한 항목을 지정된 시작점이 있는 클립보드에 복사"

#: pcbnew/tools/pcb_actions.cpp:485
msgid "Duplicate and Increment"
msgstr "복사 및 증가"

#: pcbnew/tools/pcb_actions.cpp:486
msgid "Duplicates the selected item(s), incrementing pad numbers"
msgstr "선택한 개체를 복제, 패드의 번호 증가"

#: pcbnew/tools/pcb_actions.cpp:494
msgid "Move Exactly..."
msgstr "정확하게 이동..."

#: pcbnew/tools/pcb_actions.cpp:495
msgid "Moves the selected item(s) by an exact amount"
msgstr "선택한 개체를 지정된 수치만큼 이동"

#: pcbnew/tools/pcb_actions.cpp:501
msgid "Move Corner To..."
msgstr "모서리 이동 위치..."

#: pcbnew/tools/pcb_actions.cpp:502
#, fuzzy
msgid "Move the active corner to an exact location"
msgstr "선택한 개체를 지정된 수치만큼 이동"

#: pcbnew/tools/pcb_actions.cpp:508
msgid "Move Midpoint To..."
msgstr "중간점 이동 위치..."

#: pcbnew/tools/pcb_actions.cpp:509
#, fuzzy
msgid "Move the active midpoint to an exact location"
msgstr "선택한 개체를 지정된 수치만큼 이동"

#: pcbnew/tools/pcb_actions.cpp:517
msgid "Create Array..."
msgstr "어레이 생성..."

#: pcbnew/tools/pcb_actions.cpp:518
msgid "Create array"
msgstr "어레이 생성"

#: pcbnew/tools/pcb_actions.cpp:540
msgid "Rotates selected item(s) counterclockwise"
msgstr "선택 항목 반시계 방향 회전"

#: pcbnew/tools/pcb_actions.cpp:551
msgid "Flips selected item(s) to opposite side of board"
msgstr "선택한 항목을 기판의 반대쪽으로 뒤집습니다"

#: pcbnew/tools/pcb_actions.cpp:558
msgid "Mirrors selected item across the Y axis"
msgstr "선택한 항목을 Y축 미러링"

#: pcbnew/tools/pcb_actions.cpp:565
msgid "Mirrors selected item across the X axis"
msgstr "선택한 항목을 X축 미러링"

#: pcbnew/tools/pcb_actions.cpp:580
msgid "Pack and Move Footprints"
msgstr "풋프린트 포장 및 이동"

#: pcbnew/tools/pcb_actions.cpp:581
msgid ""
"Sorts selected footprints by reference, packs based on size and initiates "
"movement"
msgstr "선택한 풋프린트를 참조별로 정렬하고 크기에 따라 포장하고 이동을 시작함"

#: pcbnew/tools/pcb_actions.cpp:589
msgid "Skip item"
msgstr "항목 건너뛰기"

#: pcbnew/tools/pcb_actions.cpp:595
msgid "Change Track Width"
msgstr "배선 너비 변경"

#: pcbnew/tools/pcb_actions.cpp:596
msgid "Updates selected track & via sizes"
msgstr "선택한 배선 & 비아 크기를 업데이트"

#: pcbnew/tools/pcb_actions.cpp:602
msgid "Adds arcs tangent to the selected straight track segments"
msgstr "선택한 직선 배선 세그먼트에 호 탄젠트를 추가합니다"

#: pcbnew/tools/pcb_actions.cpp:607
msgid "Fillet Lines..."
msgstr "모깍기 선..."

#: pcbnew/tools/pcb_actions.cpp:608
msgid "Adds arcs tangent to the selected lines"
msgstr "선택한 선에 접하는 호 탄젠트 추가"

#: pcbnew/tools/pcb_actions.cpp:614
#, fuzzy
msgid "Chamfer Lines..."
msgstr "모따기 선"

#: pcbnew/tools/pcb_actions.cpp:615
msgid "Cut away corners between selected lines"
msgstr "선택한 선 사이의 모서리 잘라내기"

#: pcbnew/tools/pcb_actions.cpp:622
msgid ""
"Connect shapes, possibly extending or cutting them, or adding extra geometry"
msgstr "도형을 연결하여 확장, 자르기, 추가 형상을 추가할 수 있음"

#: pcbnew/tools/pcb_actions.cpp:629
msgid "Extend lines to meet each other"
msgstr "서로 만나도록 선을 연장"

#: pcbnew/tools/pcb_actions.cpp:634
msgid "Merge Polygons"
msgstr "다각형 병합"

#: pcbnew/tools/pcb_actions.cpp:635
msgid "Merge selected polygons into a single polygon"
msgstr "선택한 다각형을 단일 다각형으로 병합"

#: pcbnew/tools/pcb_actions.cpp:641
#, fuzzy
msgid "Subtract Polygons"
msgstr "다각형 스케치"

#: pcbnew/tools/pcb_actions.cpp:642
msgid "Subtract selected polygons from the last one selected"
msgstr "마지막으로 선택한 다각형에서 선택한 다각형 빼기"

#: pcbnew/tools/pcb_actions.cpp:648
#, fuzzy
msgid "Intersect Polygons"
msgstr "영역 만들기"

#: pcbnew/tools/pcb_actions.cpp:649
#, fuzzy
msgid "Create the intersection of the selected polygons"
msgstr "선택한 그래픽 선으로부터 배선 생성"

#: pcbnew/tools/pcb_actions.cpp:657
msgid "Delete Full Track"
msgstr "전체 배선 삭제"

#: pcbnew/tools/pcb_actions.cpp:658
msgid "Deletes selected item(s) and copper connections"
msgstr "선택한 항목 및 구리 연결 삭제"

#: pcbnew/tools/pcb_actions.cpp:678 pcbnew/tools/pcb_actions.cpp:679
msgid "Show Footprint Tree"
msgstr "풋프린트 트리 표시"

#: pcbnew/tools/pcb_actions.cpp:685 pcbnew/tools/pcb_actions.cpp:686
msgid "Hide Footprint Tree"
msgstr "풋프린트 트리 숨기기"

#: pcbnew/tools/pcb_actions.cpp:694
msgid "New Footprint..."
msgstr "새 풋프린트..."

#: pcbnew/tools/pcb_actions.cpp:695
msgid "Create a new, empty footprint"
msgstr "비어 있는 새 풋프린트 만들기"

#: pcbnew/tools/pcb_actions.cpp:701
msgid "Create Footprint..."
msgstr "풋프린트 만들기…"

#: pcbnew/tools/pcb_actions.cpp:702
msgid "Create a new footprint using the Footprint Wizard"
msgstr "풋프린트 마법사로 새 풋프린트 생성"

#: pcbnew/tools/pcb_actions.cpp:708
msgid "Edit Footprint"
msgstr "풋프린트 편집"

#: pcbnew/tools/pcb_actions.cpp:709
msgid "Show selected footprint on editor canvas"
msgstr "편집기 캔버스에 선택한 풋프린트 표시"

#: pcbnew/tools/pcb_actions.cpp:715
msgid "Duplicate Footprint"
msgstr "풋프린트 복제"

#: pcbnew/tools/pcb_actions.cpp:716
msgid "Make a copy of the selected footprint"
msgstr "선택한 풋프린트의의 복사본 만들기"

#: pcbnew/tools/pcb_actions.cpp:722
msgid "Rename Footprint..."
msgstr "풋프린트 이름 바꾸기..."

#: pcbnew/tools/pcb_actions.cpp:723
msgid "Rename the selected footprint"
msgstr "선택한 풋프린트 이름 바꾸기"

#: pcbnew/tools/pcb_actions.cpp:729 pcbnew/tools/pcb_actions.cpp:730
msgid "Delete Footprint from Library"
msgstr "라이브러리에서 풋프린트 삭제"

#: pcbnew/tools/pcb_actions.cpp:736 pcbnew/tools/pcb_actions.cpp:737
msgid "Cut Footprint"
msgstr "풋프린트 자르기"

#: pcbnew/tools/pcb_actions.cpp:743 pcbnew/tools/pcb_actions.cpp:744
msgid "Copy Footprint"
msgstr "풋프린트 복사"

#: pcbnew/tools/pcb_actions.cpp:750 pcbnew/tools/pcb_actions.cpp:751
msgid "Paste Footprint"
msgstr "풋프린트 붙여넣기"

#: pcbnew/tools/pcb_actions.cpp:757
msgid "Import Footprint..."
msgstr "풋프린트 가져오기..."

#: pcbnew/tools/pcb_actions.cpp:758
msgid "Import footprint from file"
msgstr "파일에서 풋프린트 가져오기"

#: pcbnew/tools/pcb_actions.cpp:764
#, fuzzy
msgid "Export Current Footprint..."
msgstr "풋프린트 내보내기..."

#: pcbnew/tools/pcb_actions.cpp:765
#, fuzzy
msgid "Export edited footprint to file"
msgstr "파일로 풋프린트 내보내기"

#: pcbnew/tools/pcb_actions.cpp:771
msgid "Footprint Properties..."
msgstr "풋프린트 속성..."

#: pcbnew/tools/pcb_actions.cpp:772
msgid "Edit footprint properties"
msgstr "풋프린트 속성 편집"

#: pcbnew/tools/pcb_actions.cpp:779
msgid "Show the footprint checker window"
msgstr "풋프린트 검사기 창 표시"

#: pcbnew/tools/pcb_actions.cpp:787
msgid "Update Footprint..."
msgstr "풋프린트 업데이트..."

#: pcbnew/tools/pcb_actions.cpp:788
msgid "Update footprint to include any changes from the library"
msgstr "라이브러리의 모든 변경 사항을 포함하도록 풋프린트 업데이트"

#: pcbnew/tools/pcb_actions.cpp:794
msgid "Update Footprints from Library..."
msgstr "풋프린트 라이브러리 업데이트..."

#: pcbnew/tools/pcb_actions.cpp:795
msgid "Update footprints to include any changes from the library"
msgstr "라이브러리에서 모든 변경점을 포함하도록 풋프린트 업데이트"

#: pcbnew/tools/pcb_actions.cpp:801
msgid "Remove Unused Pads..."
msgstr "미사용 패드 제거..."

#: pcbnew/tools/pcb_actions.cpp:802
msgid ""
"Remove or restore the unconnected inner layers on through hole pads and vias"
msgstr ""
"스루홀 패드나 비아 상에서 연결되지 않은 내부 레이어를 제거하거나 복원합니다"

#: pcbnew/tools/pcb_actions.cpp:809
msgid "Assign a different footprint from the library"
msgstr "라이브러리로부터 다른 풋프린트 할당"

#: pcbnew/tools/pcb_actions.cpp:815
msgid "Change Footprints..."
msgstr "풋프린트 변경…"

#: pcbnew/tools/pcb_actions.cpp:816
msgid "Assign different footprints from the library"
msgstr "라이브러리로부터 다른 풋프린트 할당"

#: pcbnew/tools/pcb_actions.cpp:822
msgid "Swap Layers..."
msgstr "레이어 교체..."

#: pcbnew/tools/pcb_actions.cpp:823
msgid "Move tracks or drawings from one layer to another"
msgstr "한 레이어에서 다른 레이어로 배선 또는 도면 이동"

#: pcbnew/tools/pcb_actions.cpp:829
msgid "Edit Track & Via Properties..."
msgstr "배선 & 비아 속성 편집..."

#: pcbnew/tools/pcb_actions.cpp:830
msgid "Edit track and via properties globally across board"
msgstr "기판 전체의 배선과 비아 속성을 편집"

#: pcbnew/tools/pcb_actions.cpp:837
msgid "Edit Text and graphics properties globally across board"
msgstr "기판 전체의 텍스트와 그래픽 속성을 편집"

#: pcbnew/tools/pcb_actions.cpp:843
#, fuzzy
msgid "Edit Teardrops..."
msgstr "Teardrops 추가..."

#: pcbnew/tools/pcb_actions.cpp:844
#, fuzzy
msgid "Add, remove or edit teardrops globally across board"
msgstr "기판 전체의 배선과 비아 속성을 편집"

#: pcbnew/tools/pcb_actions.cpp:850
msgid "Global Deletions..."
msgstr "전역 삭제..."

#: pcbnew/tools/pcb_actions.cpp:851
msgid "Delete tracks, footprints and graphic items from board"
msgstr "기판에서 배선, 풋프린트, 그래픽 개체를 삭제"

#: pcbnew/tools/pcb_actions.cpp:857
msgid "Cleanup Tracks & Vias..."
msgstr "배선 및 비아 정리..."

#: pcbnew/tools/pcb_actions.cpp:858
msgid "Cleanup redundant items, shorting items, etc."
msgstr "중복된 항목, 잘못된 항목 등을 정리합니다."

#: pcbnew/tools/pcb_actions.cpp:864
msgid "Cleanup Graphics..."
msgstr "그래픽 정리..."

#: pcbnew/tools/pcb_actions.cpp:865
msgid "Cleanup redundant items, etc."
msgstr "중복된 항목 등을 정리합니다."

#: pcbnew/tools/pcb_actions.cpp:873
msgid "Add Microwave Gap"
msgstr "마이크로웨이브 간격 추가"

#: pcbnew/tools/pcb_actions.cpp:874
msgid "Create gap of specified length for microwave applications"
msgstr "마이크로웨이브 어플리케이션용 지정 길이 간격 만들기"

#: pcbnew/tools/pcb_actions.cpp:882
msgid "Add Microwave Stub"
msgstr "마이크로웨이브 스텁 추가"

#: pcbnew/tools/pcb_actions.cpp:883
msgid "Create stub of specified length for microwave applications"
msgstr "마이크로웨이브 어플리케이션용 지정 길이 스터브 만들기"

#: pcbnew/tools/pcb_actions.cpp:891
msgid "Add Microwave Arc Stub"
msgstr "마이크로웨이브 호 스텁 추가"

#: pcbnew/tools/pcb_actions.cpp:892
msgid "Create stub (arc) of specified size for microwave applications"
msgstr "고주파 애플리케이션을 위해 지정된 크기의 스텁(호) 생성"

#: pcbnew/tools/pcb_actions.cpp:900
msgid "Add Microwave Polygonal Shape"
msgstr "마이크로웨이브 다각형 모양 추가"

#: pcbnew/tools/pcb_actions.cpp:901
msgid "Create a microwave polygonal shape from a list of vertices"
msgstr "정점목록에서 마이크로파 다각형 모양 만들기"

#: pcbnew/tools/pcb_actions.cpp:909
msgid "Add Microwave Line"
msgstr "마이크로웨이브 라인 추가"

#: pcbnew/tools/pcb_actions.cpp:910
msgid "Create line of specified length for microwave applications"
msgstr "마이크로웨이브 어플리케이션용 지정 길이 선 만들기"

#: pcbnew/tools/pcb_actions.cpp:920
msgid "Copy Pad Properties to Default"
msgstr "패드 속성을 기본값으로 복사"

#: pcbnew/tools/pcb_actions.cpp:921
msgid "Copy current pad's properties"
msgstr "현재 패드의 속성을 복사"

#: pcbnew/tools/pcb_actions.cpp:927
msgid "Paste Default Pad Properties to Selected"
msgstr "패드 속성 기본값을 선택한 패드에 붙여넣기"

#: pcbnew/tools/pcb_actions.cpp:928
msgid "Replace the current pad's properties with those copied earlier"
msgstr "현재 패드의 속성을 복사한 속성으로 교체"

#: pcbnew/tools/pcb_actions.cpp:934
msgid "Push Pad Properties to Other Pads..."
msgstr "패드 속성을 다른 패드에 푸시..."

#: pcbnew/tools/pcb_actions.cpp:935
msgid "Copy the current pad's properties to other pads"
msgstr "현재 패드의 속성을 다른 패드에 복사"

#: pcbnew/tools/pcb_actions.cpp:941
msgid "Renumber Pads..."
msgstr "패드 숫자 재지정..."

#: pcbnew/tools/pcb_actions.cpp:942
msgid "Renumber pads by clicking on them in the desired order"
msgstr "패드를 원하는 순서대로 클릭하여 번호 재지정"

#: pcbnew/tools/pcb_actions.cpp:949
msgid "Add Pad"
msgstr "패드 추가"

#: pcbnew/tools/pcb_actions.cpp:950
msgid "Add a pad"
msgstr "패드 추가"

#: pcbnew/tools/pcb_actions.cpp:958
msgid "Edit Pad as Graphic Shapes"
msgstr "패드를 그래픽 모양으로 편집"

#: pcbnew/tools/pcb_actions.cpp:959
msgid "Ungroups a custom-shaped pad for editing as individual graphic shapes"
msgstr "사용자 정의 형상 패드를 개별 그래픽 형상으로 편집하기 위해 그룹화 해제"

#: pcbnew/tools/pcb_actions.cpp:966
msgid "Finish Pad Edit"
msgstr "패드 편집 완료"

#: pcbnew/tools/pcb_actions.cpp:967
msgid "Regroups all touching graphic shapes into the edited pad"
msgstr "모든 관련있는 그래픽 형상을 편집된 패드에 재그룹화"

#: pcbnew/tools/pcb_actions.cpp:973
msgid "Default Pad Properties..."
msgstr "패드 속성 기본값..."

#: pcbnew/tools/pcb_actions.cpp:974
msgid "Edit the pad properties used when creating new pads"
msgstr "새로운 패드를 생성할 때 사용되는 패드 속성 편집"

#: pcbnew/tools/pcb_actions.cpp:983
msgid "Refresh Plugins"
msgstr "플러그인 새로고침"

#: pcbnew/tools/pcb_actions.cpp:984
msgid "Reload all python plugins and refresh plugin menus"
msgstr "python 플러그인을 전부 다시 불러온 후 플러그인 메뉴 새로고침"

#: pcbnew/tools/pcb_actions.cpp:991
msgid "Reveal Plugin Folder in Finder"
msgstr "파인더에서 플러그인 폴더 표시"

#: pcbnew/tools/pcb_actions.cpp:992
msgid "Reveals the plugins folder in a Finder window"
msgstr "파인더 창에서 플러그인 폴더를 표시"

#: pcbnew/tools/pcb_actions.cpp:1004
msgid "Board Setup..."
msgstr "기판 설정..."

#: pcbnew/tools/pcb_actions.cpp:1005
msgid "Edit board setup including layers, design rules and various defaults"
msgstr "레이어, 디자인 규칙과 기타 기본값을 포함하여 기판 설정을 편집"

#: pcbnew/tools/pcb_actions.cpp:1011
msgid "Import Netlist..."
msgstr "네트리스트 가져오기..."

#: pcbnew/tools/pcb_actions.cpp:1012
msgid "Read netlist and update board connectivity"
msgstr "네트리스트를 읽어들여 기판 연결 정보를 업데이트"

#: pcbnew/tools/pcb_actions.cpp:1018
msgid "Import Specctra Session..."
msgstr "스펙트라 세션 가져오기..."

#: pcbnew/tools/pcb_actions.cpp:1019
msgid "Import routed Specctra session (*.ses) file"
msgstr "라우트된 Specctra session (*.ses) 파일 가져오기"

#: pcbnew/tools/pcb_actions.cpp:1025
msgid "Export Specctra DSN..."
msgstr "스펙트라 DSN 내보내기..."

#: pcbnew/tools/pcb_actions.cpp:1026
msgid "Export Specctra DSN routing info"
msgstr "Specctra DSN 라우팅 정보 내보내기"

#: pcbnew/tools/pcb_actions.cpp:1032
msgid "Gerbers (.gbr)..."
msgstr "거버 파일(.gbr)..."

#: pcbnew/tools/pcb_actions.cpp:1033
msgid "Generate Gerbers for fabrication"
msgstr "기판 제조용 거버 파일 생성"

#: pcbnew/tools/pcb_actions.cpp:1039
msgid "Drill Files (.drl)..."
msgstr "드릴 파일 (.drl)..."

#: pcbnew/tools/pcb_actions.cpp:1040
msgid "Generate Excellon drill file(s)"
msgstr "Excellon 드릴 파일 생성"

#: pcbnew/tools/pcb_actions.cpp:1046
#, fuzzy
msgid "Component Placement (.pos, .gbr)..."
msgstr "부품 배치 파일(.pos)..."

#: pcbnew/tools/pcb_actions.cpp:1047
msgid "Generate component placement file(s) for pick and place"
msgstr "선택 및 배치를 위한 부품 배치 파일 생성"

#: pcbnew/tools/pcb_actions.cpp:1053
msgid "Footprint Report (.rpt)..."
msgstr "풋프린터 보고서 (.rpt)..."

#: pcbnew/tools/pcb_actions.cpp:1054
msgid "Create report of all footprints from current board"
msgstr "현재 기판에서 모든 풋프린트에 대한 보고서 만들기"

#: pcbnew/tools/pcb_actions.cpp:1060
msgid "IPC-2581 File (.xml)..."
msgstr "IPC-2581 파일(.xml)..."

#: pcbnew/tools/pcb_actions.cpp:1061
#, fuzzy
msgid "Generate an IPC-2581 file"
msgstr "IPC-D-356 네트리스트 파일 생성"

#: pcbnew/tools/pcb_actions.cpp:1067
msgid "IPC-D-356 Netlist File..."
msgstr "IPC-D-356 네트리스트 파일..."

#: pcbnew/tools/pcb_actions.cpp:1068
msgid "Generate IPC-D-356 netlist file"
msgstr "IPC-D-356 네트리스트 파일 생성"

#: pcbnew/tools/pcb_actions.cpp:1074
msgid "Bill of Materials..."
msgstr "BOM..."

#: pcbnew/tools/pcb_actions.cpp:1075
msgid "Create bill of materials from board"
msgstr "기판에서 BOM (Bill of materials) 을 생성"

#: pcbnew/tools/pcb_actions.cpp:1084
msgid "Switch Track Width to Next"
msgstr "배선 폭을 다음과 같이 변경"

#: pcbnew/tools/pcb_actions.cpp:1085
msgid "Change track width to next pre-defined size"
msgstr "배선 너비를 미리 정의된 다음 크기로 변경"

#: pcbnew/tools/pcb_actions.cpp:1092
msgid "Switch Track Width to Previous"
msgstr "배선 너비를 이전으로 전환"

#: pcbnew/tools/pcb_actions.cpp:1093
msgid "Change track width to previous pre-defined size"
msgstr "배선 너비를 사전 정의된 이전 크기로 변경"

#: pcbnew/tools/pcb_actions.cpp:1100
msgid "Increase Via Size"
msgstr "비아 크기 증가"

#: pcbnew/tools/pcb_actions.cpp:1101
msgid "Change via size to next pre-defined size"
msgstr "다음의 이미 지정된 값으로 비아 크기를 변경합니다"

#: pcbnew/tools/pcb_actions.cpp:1108
msgid "Decrease Via Size"
msgstr "비아 크기 감소"

#: pcbnew/tools/pcb_actions.cpp:1109
msgid "Change via size to previous pre-defined size"
msgstr "이전의 이미 지정된 값으로 비아 크기를 변경합니다"

#: pcbnew/tools/pcb_actions.cpp:1126
msgid "Merge Zones"
msgstr "병합 영역"

#: pcbnew/tools/pcb_actions.cpp:1127
msgid "Merge zones"
msgstr "영역 병합"

#: pcbnew/tools/pcb_actions.cpp:1132
msgid "Duplicate Zone onto Layer..."
msgstr "레이어상의 영역 중복..."

#: pcbnew/tools/pcb_actions.cpp:1133
msgid "Duplicate zone outline onto a different layer"
msgstr "다른 레이어 상에 영역 외곽선 중복"

#: pcbnew/tools/pcb_actions.cpp:1141
msgid "Add Footprint"
msgstr "풋프린트 추가"

#: pcbnew/tools/pcb_actions.cpp:1142
msgid "Add a footprint"
msgstr "풋프린트 추가"

#: pcbnew/tools/pcb_actions.cpp:1150
msgid "Drill/Place File Origin"
msgstr "드릴/배치 파일 원점"

#: pcbnew/tools/pcb_actions.cpp:1151
msgid "Place origin point for drill files and component placement files"
msgstr "드릴 파일과 부품 배치 파일 원점 배치"

#: pcbnew/tools/pcb_actions.cpp:1159
#, fuzzy
msgid "Reset Drill Origin"
msgstr "그리드 원점 재설정"

#: pcbnew/tools/pcb_actions.cpp:1166
msgid "Toggle Lock"
msgstr "잠금 토글"

#: pcbnew/tools/pcb_actions.cpp:1167
msgid "Lock or unlock selected items"
msgstr "선택한 항목 잠금 또는 잠금 해제"

#: pcbnew/tools/pcb_actions.cpp:1175
msgid ""
"Limit actions to horizontal, vertical, or 45 degrees from the starting point"
msgstr "작업을 시작점에서 수평, 수직 또는 45도로 제한합니다"

#: pcbnew/tools/pcb_actions.cpp:1182
msgid "Prevent items from being moved and/or resized on the canvas"
msgstr "캔버스에서 개체가 움직이거나 크기가 변형되는 것을 방지"

#: pcbnew/tools/pcb_actions.cpp:1189
msgid "Allow items to be moved and/or resized on the canvas"
msgstr "캔버스상의 개체 움직이기와 크기 변환을 허용"

#: pcbnew/tools/pcb_actions.cpp:1196
msgid "Group the selected items so that they are treated as a single item"
msgstr "선택한 항목을 단일 항목으로 처리하도록 그룹화"

#: pcbnew/tools/pcb_actions.cpp:1203
msgid "Ungroup any selected groups"
msgstr "선택한 그룹의 그룹 해제"

#: pcbnew/tools/pcb_actions.cpp:1209
msgid "Remove Items"
msgstr "항목 제거"

#: pcbnew/tools/pcb_actions.cpp:1210
msgid "Remove items from group"
msgstr "그룹에서 항목 제거"

#: pcbnew/tools/pcb_actions.cpp:1216
msgid "Enter Group"
msgstr "그룹에 들어가기"

#: pcbnew/tools/pcb_actions.cpp:1217
msgid "Enter the group to edit items"
msgstr "그룹에 접근하여 항목을 편집합니다"

#: pcbnew/tools/pcb_actions.cpp:1223
msgid "Leave Group"
msgstr "그룹에서 나가기"

#: pcbnew/tools/pcb_actions.cpp:1224
msgid "Leave the current group"
msgstr "현재 그룹에서 나가기"

#: pcbnew/tools/pcb_actions.cpp:1230
msgid "Append Board..."
msgstr "보드 추가…"

#: pcbnew/tools/pcb_actions.cpp:1231
msgid "Open another board and append its contents to this board"
msgstr "다른 기판를 열어 해당 기판의 내용을 이 기판에 추가"

#: pcbnew/tools/pcb_actions.cpp:1248
msgid "Toggle Last Net Highlight"
msgstr "마지막 네트 강조 표시 전환"

#: pcbnew/tools/pcb_actions.cpp:1249
msgid "Toggle between last two highlighted nets"
msgstr "마지막의 두 강조된 네트 간 전환"

#: pcbnew/tools/pcb_actions.cpp:1263
msgid "Toggle Net Highlight"
msgstr "네트 강조 표시 전환"

#: pcbnew/tools/pcb_actions.cpp:1264
msgid "Toggle net highlighting"
msgstr "네트 강조 표시 전환"

#: pcbnew/tools/pcb_actions.cpp:1272
msgid "Highlight all copper items on the selected net(s)"
msgstr "선택한 네트의 모든 구리 항목을 강조 표시"

#: pcbnew/tools/pcb_actions.cpp:1283
msgid "Hide Net in Ratsnest"
msgstr "Ratsnest에서 네트숨기기"

#: pcbnew/tools/pcb_actions.cpp:1284
msgid "Hide the selected net in the ratsnest of unconnected net lines/arcs"
msgstr "연결되지 않은 네트 라인/호의 레츠네스트에서 선택한 네트 숨기기"

#: pcbnew/tools/pcb_actions.cpp:1291
msgid "Show Net in Ratsnest"
msgstr "래츠네스트에서 네트 보기"

#: pcbnew/tools/pcb_actions.cpp:1292
msgid "Show the selected net in the ratsnest of unconnected net lines/arcs"
msgstr "연결되지 않은 네트 라인 / 아크의 레츠네스트에 선택된 그물을 보여줍니다"

#: pcbnew/tools/pcb_actions.cpp:1299
msgid "Switch to Schematic Editor"
msgstr "회로도 편집기로 전환"

#: pcbnew/tools/pcb_actions.cpp:1300
#, fuzzy
msgid "Open schematic in schematic editor"
msgstr "회로도 편집기에서 열기"

#: pcbnew/tools/pcb_actions.cpp:1310
msgid "Local Ratsnest"
msgstr "지역 연결선"

#: pcbnew/tools/pcb_actions.cpp:1311
msgid "Toggle ratsnest display of selected item(s)"
msgstr "선택한 개체에 대해 연결선 표시 전환"

#: pcbnew/tools/pcb_actions.cpp:1328
msgid "Show the net inspector"
msgstr "네트 검사기 표시"

#: pcbnew/tools/pcb_actions.cpp:1348
msgid "Flip Board View"
msgstr "보드 뷰 반전"

#: pcbnew/tools/pcb_actions.cpp:1349
msgid "View board from the opposite side"
msgstr "기판을 반대편 시점으로 보기"

#: pcbnew/tools/pcb_actions.cpp:1356
msgid "Show Ratsnest"
msgstr "연결선 표시"

#: pcbnew/tools/pcb_actions.cpp:1357
msgid "Show board ratsnest"
msgstr "기판 연결선 표시"

#: pcbnew/tools/pcb_actions.cpp:1363
msgid "Curved Ratsnest Lines"
msgstr "곡선 연결선"

#: pcbnew/tools/pcb_actions.cpp:1370
msgid "Ratsnest Mode (3-state)"
msgstr "연결선 모드 (3 상태)"

#: pcbnew/tools/pcb_actions.cpp:1371
msgid ""
"Cycle between showing ratsnests for all layers, just visible layers, and none"
msgstr ""
"모든 레이어 / 현재 레이어 / 표시하지 않음 간 ratsnests연결선 표시 방법 전환"

#: pcbnew/tools/pcb_actions.cpp:1376
msgid "Net Color Mode (3-state)"
msgstr "네트 색 모드 (3개 상태)"

#: pcbnew/tools/pcb_actions.cpp:1377
msgid ""
"Cycle between using net and netclass colors for all nets, just ratsnests, "
"and none"
msgstr ""
"모든 네트 / ratsnests연결선 / 사용하지 않음 간 네트와 네트 클래스 색상 사용 "
"전환"

#: pcbnew/tools/pcb_actions.cpp:1384
msgid "Sketch Tracks"
msgstr "배선 스케치"

#: pcbnew/tools/pcb_actions.cpp:1385
msgid "Show tracks in outline mode"
msgstr "외곽선 모드에서 배선 표시"

#: pcbnew/tools/pcb_actions.cpp:1391
msgid "Sketch Pads"
msgstr "패드 스케치"

#: pcbnew/tools/pcb_actions.cpp:1392
msgid "Show pads in outline mode"
msgstr "외곽선 모드에서 패드 표시"

#: pcbnew/tools/pcb_actions.cpp:1398
msgid "Sketch Vias"
msgstr "비아 스케치"

#: pcbnew/tools/pcb_actions.cpp:1399
msgid "Show vias in outline mode"
msgstr "외곽선 모드에서 비아 표시"

#: pcbnew/tools/pcb_actions.cpp:1405
msgid "Sketch Graphic Items"
msgstr "그래픽 개체 스케치"

#: pcbnew/tools/pcb_actions.cpp:1406
msgid "Show graphic items in outline mode"
msgstr "외곽선 모드에서 그래픽 개체 표시"

#: pcbnew/tools/pcb_actions.cpp:1412
msgid "Sketch Text Items"
msgstr "텍스트 개체 스케치"

#: pcbnew/tools/pcb_actions.cpp:1413
msgid "Show footprint texts in line mode"
msgstr "라인 모드에서 풋프린트 텍스트 표시"

#: pcbnew/tools/pcb_actions.cpp:1419
#, fuzzy
msgid "Show Pad Numbers"
msgstr "핀 번호 표시"

#: pcbnew/tools/pcb_actions.cpp:1426
msgid "Draw Zone Fills"
msgstr "영역 채움 그리기"

#: pcbnew/tools/pcb_actions.cpp:1427
msgid "Show filled areas of zones"
msgstr "영역의 채워진 구역 표시"

#: pcbnew/tools/pcb_actions.cpp:1433
msgid "Draw Zone Outlines"
msgstr "영역 외곽선 그리기"

#: pcbnew/tools/pcb_actions.cpp:1434
msgid "Show only zone boundaries"
msgstr "영역 경계만 표시"

#: pcbnew/tools/pcb_actions.cpp:1440 pcbnew/tools/pcb_actions.cpp:1441
msgid "Draw Zone Fill Fracture Borders"
msgstr "부러진 경계선으로 영역 채움 그리기"

#: pcbnew/tools/pcb_actions.cpp:1447 pcbnew/tools/pcb_actions.cpp:1448
msgid "Draw Zone Fill Triangulation"
msgstr "삼각형으로 영역 채움 그리기"

#: pcbnew/tools/pcb_actions.cpp:1454
msgid "Toggle Zone Display"
msgstr "영역 표시 전환"

#: pcbnew/tools/pcb_actions.cpp:1455
msgid "Cycle between showing zone fills and just their outlines"
msgstr "영역 채움과 영역의 외곽선 표시 주기"

#: pcbnew/tools/pcb_actions.cpp:1516 pcbnew/tools/pcb_actions.cpp:1517
msgid "Switch to Component (F.Cu) layer"
msgstr "부품 레이어 (F.Cu) 로 전환"

#: pcbnew/tools/pcb_actions.cpp:1526
#, fuzzy
msgid "Switch to Inner Layer 1"
msgstr "내부 레이어 1로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1527
msgid "Switch to Inner layer 1"
msgstr "내부 레이어 1로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1536
#, fuzzy
msgid "Switch to Inner Layer 2"
msgstr "내부 레이어 2로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1537
msgid "Switch to Inner layer 2"
msgstr "내부 레이어 2로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1546
#, fuzzy
msgid "Switch to Inner Layer 3"
msgstr "내부 레이어 3으로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1547
msgid "Switch to Inner layer 3"
msgstr "내부 레이어 3으로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1556
#, fuzzy
msgid "Switch to Inner Layer 4"
msgstr "내부 레이어 4로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1557
msgid "Switch to Inner layer 4"
msgstr "내부 레이어 4로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1566
#, fuzzy
msgid "Switch to Inner Layer 5"
msgstr "내부 레이어 5로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1567
msgid "Switch to Inner layer 5"
msgstr "내부 레이어 5로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1576
#, fuzzy
msgid "Switch to Inner Layer 6"
msgstr "내부 레이어 6으로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1577
msgid "Switch to Inner layer 6"
msgstr "내부 레이어 6으로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1585
#, fuzzy
msgid "Switch to Inner Layer 7"
msgstr "내부 레이어 7로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1586
msgid "Switch to Inner layer 7"
msgstr "내부 레이어 7로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1594
#, fuzzy
msgid "Switch to Inner Layer 8"
msgstr "내부 레이어 8로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1595
msgid "Switch to Inner layer 8"
msgstr "내부 레이어 8로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1603
#, fuzzy
msgid "Switch to Inner Layer 9"
msgstr "내부 레이어 9로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1604
msgid "Switch to Inner layer 9"
msgstr "내부 레이어 9로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1612
#, fuzzy
msgid "Switch to Inner Layer 10"
msgstr "내부 레이어 10으로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1613
msgid "Switch to Inner layer 10"
msgstr "내부 레이어 10으로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1621
#, fuzzy
msgid "Switch to Inner Layer 11"
msgstr "내부 레이어 11로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1622
msgid "Switch to Inner layer 11"
msgstr "내부 레이어 11로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1630
#, fuzzy
msgid "Switch to Inner Layer 12"
msgstr "내부 레이어 12로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1631
msgid "Switch to Inner layer 12"
msgstr "내부 레이어 12로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1639
#, fuzzy
msgid "Switch to Inner Layer 13"
msgstr "내부 레이어 13으로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1640
msgid "Switch to Inner layer 13"
msgstr "내부 레이어 13으로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1648
#, fuzzy
msgid "Switch to Inner Layer 14"
msgstr "내부 레이어 14로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1649
msgid "Switch to Inner layer 14"
msgstr "내부 레이어 14로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1657
#, fuzzy
msgid "Switch to Inner Layer 15"
msgstr "내부 레이어 15로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1658
msgid "Switch to Inner layer 15"
msgstr "내부 레이어 15로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1666
#, fuzzy
msgid "Switch to Inner Layer 16"
msgstr "내부 레이어 16으로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1667
msgid "Switch to Inner layer 16"
msgstr "내부 레이어 16으로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1675
#, fuzzy
msgid "Switch to Inner Layer 17"
msgstr "내부 레이어 17로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1676
msgid "Switch to Inner layer 17"
msgstr "내부 레이어 17로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1684
#, fuzzy
msgid "Switch to Inner Layer 18"
msgstr "내부 레이어 18로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1685
msgid "Switch to Inner layer 18"
msgstr "내부 레이어 18로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1693
#, fuzzy
msgid "Switch to Inner Layer 19"
msgstr "내부 레이어 19로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1694
msgid "Switch to Inner layer 19"
msgstr "내부 레이어 19로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1702
#, fuzzy
msgid "Switch to Inner Layer 20"
msgstr "내부 레이어 20으로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1703
msgid "Switch to Inner layer 20"
msgstr "내부 레이어 20으로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1711
#, fuzzy
msgid "Switch to Inner Layer 21"
msgstr "내부 레이어 21로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1712
msgid "Switch to Inner layer 21"
msgstr "내부 레이어 21로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1720
#, fuzzy
msgid "Switch to Inner Layer 22"
msgstr "내부 레이어 22로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1721
msgid "Switch to Inner layer 22"
msgstr "내부 레이어 22로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1729
#, fuzzy
msgid "Switch to Inner Layer 23"
msgstr "내부 레이어 23으로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1730
msgid "Switch to Inner layer 23"
msgstr "내부 레이어 23으로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1738
#, fuzzy
msgid "Switch to Inner Layer 24"
msgstr "내부 레이어 24로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1739
msgid "Switch to Inner layer 24"
msgstr "내부 레이어 24로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1747
#, fuzzy
msgid "Switch to Inner Layer 25"
msgstr "내부 레이어 25로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1748
msgid "Switch to Inner layer 25"
msgstr "내부 레이어 25로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1756
#, fuzzy
msgid "Switch to Inner Layer 26"
msgstr "내부 레이어 26으로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1757
msgid "Switch to Inner layer 26"
msgstr "내부 레이어 26으로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1765
#, fuzzy
msgid "Switch to Inner Layer 27"
msgstr "내부 레이어 27로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1766
msgid "Switch to Inner layer 27"
msgstr "내부 레이어 27로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1774
#, fuzzy
msgid "Switch to Inner Layer 28"
msgstr "내부 레이어 28로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1775
msgid "Switch to Inner layer 28"
msgstr "내부 레이어 28로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1783
#, fuzzy
msgid "Switch to Inner Layer 29"
msgstr "내부 레이어 29로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1784
msgid "Switch to Inner layer 29"
msgstr "내부 레이어 29로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1792
#, fuzzy
msgid "Switch to Inner Layer 30"
msgstr "내부 레이어 30으로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1793
msgid "Switch to Inner layer 30"
msgstr "내부 레이어 30으로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1803
#, fuzzy
msgid "Switch to Copper (B.Cu) Layer"
msgstr "구리 레이어 (B.Cu) 로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1804
msgid "Switch to Copper (B.Cu) layer"
msgstr "구리 레이어 (B.Cu) 로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1813 pcbnew/tools/pcb_actions.cpp:1814
msgid "Switch to Next Layer"
msgstr "다음 레이어로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1822 pcbnew/tools/pcb_actions.cpp:1823
msgid "Switch to Previous Layer"
msgstr "이전 레이어로 스위치"

#: pcbnew/tools/pcb_actions.cpp:1831
msgid "Toggle Layer"
msgstr "레이어 전환"

#: pcbnew/tools/pcb_actions.cpp:1832
msgid "Switch between layers in active layer pair"
msgstr "활성화된 레이어 쌍 간 레이어 전환"

#: pcbnew/tools/pcb_actions.cpp:1841
msgid "Increase Layer Opacity"
msgstr "레이어 투명도 증가"

#: pcbnew/tools/pcb_actions.cpp:1842
msgid "Make the current layer less transparent"
msgstr "현재 레이어를 덜 투명하게 하기"

#: pcbnew/tools/pcb_actions.cpp:1851
msgid "Decrease Layer Opacity"
msgstr "레이어 투명도 감소"

#: pcbnew/tools/pcb_actions.cpp:1852
msgid "Make the current layer more transparent"
msgstr "현재 레이어를 더 투명하게 하기"

#: pcbnew/tools/pcb_actions.cpp:1864
msgid "Show Board Statistics"
msgstr "기판의 통계 표시"

#: pcbnew/tools/pcb_actions.cpp:1865
msgid "Shows board statistics"
msgstr "기판의 통계 표시"

#: pcbnew/tools/pcb_actions.cpp:1870
msgid "Clearance Resolution"
msgstr "클리어런스 해결"

#: pcbnew/tools/pcb_actions.cpp:1871
msgid ""
"Show clearance resolution for the active layer between two selected objects"
msgstr "선택한 두 객체에 대하여 활성화된 레이어의 클리어런스 해법을 표시"

#: pcbnew/tools/pcb_actions.cpp:1877
msgid "Constraints Resolution"
msgstr "제약 조건 해결"

#: pcbnew/tools/pcb_actions.cpp:1878
msgid "Show constraints resolution for the selected object"
msgstr "선택한 객체에 대한 제약 조건 해법 표시"

#: pcbnew/tools/pcb_actions.cpp:1885
msgid "Show differences between board footprint and its library equivalent"
msgstr "보드 풋프린트와 해당 라이브러리 간의 차이점 표시"

#: pcbnew/tools/pcb_actions.cpp:1891
#, fuzzy
msgid "Show Footprint Associations"
msgstr "풋프린트 회전"

#: pcbnew/tools/pcb_actions.cpp:1892
msgid "Show footprint library and schematic symbol associations"
msgstr "풋프린트 라이브러리 및 회로도 심볼 연결 표시"

#: pcbnew/tools/pcb_actions.cpp:1899
msgid "Geographical Reannotate..."
msgstr "지리적 재 주석..."

#: pcbnew/tools/pcb_actions.cpp:1900
msgid "Reannotate PCB in geographical order"
msgstr "PCB를 위치 순으로 다시 주석 처리합니다"

#: pcbnew/tools/pcb_actions.cpp:1906
msgid "Repair Board"
msgstr "기판 복구"

#: pcbnew/tools/pcb_actions.cpp:1907
msgid "Run various diagnostics and attempt to repair board"
msgstr "다양한 진단을 실행하여 기판 수리를 시도합니다"

#: pcbnew/tools/pcb_actions.cpp:1914
msgid "Repair Footprint"
msgstr "풋프린트 복구"

#: pcbnew/tools/pcb_actions.cpp:1915
msgid "Run various diagnostics and attempt to repair footprint"
msgstr "다양한 진단을 실행하여 풋프린트 수리를 시도합니다"

#: pcbnew/tools/pcb_actions.cpp:1923 pcbnew/tools/placement_tool.cpp:231
msgid "Align to Top"
msgstr "위쪽 맞춤"

#: pcbnew/tools/pcb_actions.cpp:1924
msgid "Aligns selected items to the top edge"
msgstr "선택한 항목을 위쪽 모서리에 정렬"

#: pcbnew/tools/pcb_actions.cpp:1930 pcbnew/tools/placement_tool.cpp:275
msgid "Align to Bottom"
msgstr "아래쪽 맞춤"

#: pcbnew/tools/pcb_actions.cpp:1931
msgid "Aligns selected items to the bottom edge"
msgstr "선택한 항목을 아래쪽 모서리에 정렬"

#: pcbnew/tools/pcb_actions.cpp:1937 pcbnew/tools/placement_tool.cpp:330
msgid "Align to Left"
msgstr "왼쪽 맞춤"

#: pcbnew/tools/pcb_actions.cpp:1938
msgid "Aligns selected items to the left edge"
msgstr "선택한 항목을 왼쪽 모서리에 정렬"

#: pcbnew/tools/pcb_actions.cpp:1944 pcbnew/tools/placement_tool.cpp:385
msgid "Align to Right"
msgstr "오른쪽 맞춤"

#: pcbnew/tools/pcb_actions.cpp:1945
msgid "Aligns selected items to the right edge"
msgstr "선택한 항목을 오른쪽 모서리에 정렬"

#: pcbnew/tools/pcb_actions.cpp:1951
msgid "Align to Vertical Center"
msgstr "수직 중앙에 맞춤"

#: pcbnew/tools/pcb_actions.cpp:1952
msgid "Aligns selected items to the vertical center"
msgstr "선택한 항목을 수직 중앙에 정렬"

#: pcbnew/tools/pcb_actions.cpp:1958
msgid "Align to Horizontal Center"
msgstr "수평 중앙에 맞춤"

#: pcbnew/tools/pcb_actions.cpp:1959
msgid "Aligns selected items to the horizontal center"
msgstr "선택한 항목을 수평 중앙에 정렬"

#: pcbnew/tools/pcb_actions.cpp:1965 pcbnew/tools/placement_tool.cpp:535
msgid "Distribute Horizontally"
msgstr "수평 배치"

#: pcbnew/tools/pcb_actions.cpp:1966
msgid "Distributes selected items along the horizontal axis"
msgstr "선택한 항목을 수평 축을 따라 배치"

#: pcbnew/tools/pcb_actions.cpp:1972 pcbnew/tools/placement_tool.cpp:660
msgid "Distribute Vertically"
msgstr "수직 배치"

#: pcbnew/tools/pcb_actions.cpp:1973
msgid "Distributes selected items along the vertical axis"
msgstr "선택한 항목을 수직 축을 따라 배치"

#: pcbnew/tools/pcb_actions.cpp:2001
#, fuzzy
msgid "Keep Arc Center, Adjust Radius"
msgstr "아크 중심 유지, 반경 조정"

#: pcbnew/tools/pcb_actions.cpp:2002
msgid "Switch arc editing mode to keep center, adjust radius and endpoints"
msgstr "호 편집 모드를 전환하여 중심을 유지하고 반지름과 끝점을 조정함"

#: pcbnew/tools/pcb_actions.cpp:2008
#, fuzzy
msgid "Keep Arc Endpoints or Direction of Starting Point"
msgstr "끝점 또는 시작점 방향 유지"

#: pcbnew/tools/pcb_actions.cpp:2009
msgid ""
"Switch arc editing mode to keep endpoints, or to keep direction of the other "
"point"
msgstr "호 편집 모드를 전환하여 끝점을 유지하거나 다른 점의 방향을 유지함"

#: pcbnew/tools/pcb_actions.cpp:2032
msgid "Position Relative To..."
msgstr "상대 위치..."

#: pcbnew/tools/pcb_actions.cpp:2033
msgid "Positions the selected item(s) by an exact amount relative to another"
msgstr "선택한 항목을 다른 항목의 위치에 정확한 양만큼 상대적으로 배치"

#: pcbnew/tools/pcb_actions.cpp:2087
msgid "Select/Expand Connection"
msgstr "연결 선택/확장"

#: pcbnew/tools/pcb_actions.cpp:2088
msgid ""
"Selects a connection or expands an existing selection to junctions, pads, or "
"entire connections"
msgstr "접합, 패드 또는 전체 연결에 대한 연결 선택 또는 기존 선택 확장"

#: pcbnew/tools/pcb_actions.cpp:2094
msgid "Unroute Selected"
msgstr "경로 해제 선택됨"

#: pcbnew/tools/pcb_actions.cpp:2095
msgid "Unroutes selected items to the nearest pad."
msgstr "선택한 항목을 가장 가까운 패드로 언라우트함."

#: pcbnew/tools/pcb_actions.cpp:2109
msgid "Select All Tracks in Net"
msgstr "네트의 모든 배선 선택"

#: pcbnew/tools/pcb_actions.cpp:2110
msgid "Selects all tracks & vias belonging to the same net."
msgstr "같은 네트에 속한 모든 배선 & 비아를 선택합니다."

#: pcbnew/tools/pcb_actions.cpp:2116
msgid "Deselect All Tracks in Net"
msgstr "네트의 모든 배선 선택 해제"

#: pcbnew/tools/pcb_actions.cpp:2117
msgid "Deselects all tracks & vias belonging to the same net."
msgstr "같은 네트에 속한 모든 배선 & 비아를 선택 해제합니다."

#: pcbnew/tools/pcb_actions.cpp:2124
msgid "Select All Unconnected Footprints"
msgstr "연결되지 않은 모든 풋프린트 선택"

#: pcbnew/tools/pcb_actions.cpp:2125
msgid "Selects all unconnected footprints belonging to each selected net."
msgstr "선택한 각 네트에 속하는 연결되지 않은 모든 풋프린트를 선택합니다."

#: pcbnew/tools/pcb_actions.cpp:2131
msgid "Grab Nearest Unconnected Footprints"
msgstr "연결되지 않은 가장 가까운 풋프린트 잡기"

#: pcbnew/tools/pcb_actions.cpp:2132
msgid ""
"Selects and initiates moving the nearest unconnected footprint on each "
"selected net."
msgstr ""
"선택한 각 네트에서 가장 가까운 연결되지 않은 풋프린트를 선택하고 이동을 시작"
"합니다."

#: pcbnew/tools/pcb_actions.cpp:2138
msgid "Selects all footprints and tracks in the schematic sheet"
msgstr "회로도 시트의 모든 배선과 풋프린트 선택"

#: pcbnew/tools/pcb_actions.cpp:2144
msgid "Items in Same Hierarchical Sheet"
msgstr "같은 계층 시트 안의 개체"

#: pcbnew/tools/pcb_actions.cpp:2145
msgid "Selects all footprints and tracks in the same schematic sheet"
msgstr "같은 회로도 시트에 속한 모든 풋프린트와 배선을 선택합니다"

#: pcbnew/tools/pcb_actions.cpp:2151
msgid "Select on Schematic"
msgstr "회로도에서 선택"

#: pcbnew/tools/pcb_actions.cpp:2152
msgid "Selects corresponding items in Schematic editor"
msgstr "Schematic 편집기에서 해당 항목 선택"

#: pcbnew/tools/pcb_actions.cpp:2158
msgid "Filter Selected Items..."
msgstr "선택한 항목 필터링..."

#: pcbnew/tools/pcb_actions.cpp:2159
msgid "Remove items from the selection by type"
msgstr "선택한 항목에서 특정 유형의 항목 제거"

#: pcbnew/tools/pcb_actions.cpp:2168
msgid "Draft Fill Selected Zone(s)"
msgstr "선택 영역 초안 채우기"

#: pcbnew/tools/pcb_actions.cpp:2169
msgid ""
"Update copper fill of selected zone(s) without regard to other interacting "
"zones"
msgstr "다른 상호 작용 영역에 관계없이 선택한 영역의 구리 채우기"

#: pcbnew/tools/pcb_actions.cpp:2178 pcbnew/tools/zone_filler_tool.cpp:166
msgid "Fill All Zones"
msgstr "모든 영역 채우기"

#: pcbnew/tools/pcb_actions.cpp:2179
msgid "Update copper fill of all zones"
msgstr "모든 영역의 구리 채움 업데이트"

#: pcbnew/tools/pcb_actions.cpp:2189
msgid "Unfill Selected Zone(s)"
msgstr "선택한 영역 채우기 해제"

#: pcbnew/tools/pcb_actions.cpp:2190
msgid "Remove copper fill from selected zone(s)"
msgstr "선택 영역의 구리 채움 제거"

#: pcbnew/tools/pcb_actions.cpp:2198 pcbnew/tools/zone_filler_tool.cpp:426
msgid "Unfill All Zones"
msgstr "모든 영역 비우기"

#: pcbnew/tools/pcb_actions.cpp:2199
msgid "Remove copper fill from all zones"
msgstr "모든 영역의 구리 채움 제거"

#: pcbnew/tools/pcb_actions.cpp:2208
msgid "Place Selected Footprints"
msgstr "선택한 풋프린트 배치"

#: pcbnew/tools/pcb_actions.cpp:2209
msgid "Performs automatic placement of selected components"
msgstr "선택한 부품에 대해 자동 배치를 수행"

#: pcbnew/tools/pcb_actions.cpp:2214
msgid "Place Off-Board Footprints"
msgstr "기판 밖의 풋프린트 배치"

#: pcbnew/tools/pcb_actions.cpp:2215
msgid "Performs automatic placement of components outside board area"
msgstr "기판 영역 밖에 있는 부품에 대해 자동 배치를 수행"

#: pcbnew/tools/pcb_actions.cpp:2225
msgid "Route Single Track"
msgstr "단일 배선 라우트"

#: pcbnew/tools/pcb_actions.cpp:2226
msgid "Route tracks"
msgstr "배선 라우트"

#: pcbnew/tools/pcb_actions.cpp:2237
msgid "Route Differential Pair"
msgstr "차동 쌍 라우트"

#: pcbnew/tools/pcb_actions.cpp:2238
msgid "Route differential pairs"
msgstr "차동 쌍 라우트"

#: pcbnew/tools/pcb_actions.cpp:2248
msgid "Interactive Router Settings..."
msgstr "대화형 라우터 설정..."

#: pcbnew/tools/pcb_actions.cpp:2249
msgid "Open Interactive Router settings"
msgstr "대화형 라우터 설정 열기"

#: pcbnew/tools/pcb_actions.cpp:2255
msgid "Differential Pair Dimensions..."
msgstr "차동 쌍 치수..."

#: pcbnew/tools/pcb_actions.cpp:2256
msgid "Open Differential Pair Dimension settings"
msgstr "차동 쌍 치수 설정 열기"

#: pcbnew/tools/pcb_actions.cpp:2262
msgid "Router Highlight Mode"
msgstr "라우터 강조 모드"

#: pcbnew/tools/pcb_actions.cpp:2263
msgid "Switch router to highlight mode"
msgstr "라우터를 강조 모드로 전환"

#: pcbnew/tools/pcb_actions.cpp:2270
msgid "Router Shove Mode"
msgstr "라우터 밀어내기 모드"

#: pcbnew/tools/pcb_actions.cpp:2271
msgid "Switch router to shove mode"
msgstr "라우터를 밀어내기 모드로 전환"

#: pcbnew/tools/pcb_actions.cpp:2278
msgid "Router Walkaround Mode"
msgstr "라우터 돌아가기 모드"

#: pcbnew/tools/pcb_actions.cpp:2279
msgid "Switch router to walkaround mode"
msgstr "라우터를 돌아가기 모드로 전환"

#: pcbnew/tools/pcb_actions.cpp:2286
msgid "Cycle Router Mode"
msgstr "라우터 모드 사이클"

#: pcbnew/tools/pcb_actions.cpp:2287
msgid "Cycle router to the next mode"
msgstr "라우터를 다음 모드로 순환"

#: pcbnew/tools/pcb_actions.cpp:2292
msgid "Set Layer Pair..."
msgstr "레이어 쌍 설정..."

#: pcbnew/tools/pcb_actions.cpp:2293
msgid "Change active layer pair for routing"
msgstr "라우팅을 위한 활성화된 레이어 쌍 변경"

#: pcbnew/tools/pcb_actions.cpp:2303 pcbnew/tools/pcb_actions.cpp:2304
msgid "Tune length of a single track"
msgstr "단일 배선의 길이를 조정"

#: pcbnew/tools/pcb_actions.cpp:2315 pcbnew/tools/pcb_actions.cpp:2316
msgid "Tune length of a differential pair"
msgstr "차동 쌍의 길이를 조정"

#: pcbnew/tools/pcb_actions.cpp:2323
#, fuzzy
msgid "Tune Length of a Single Track"
msgstr "단일 배선의 길이를 조정"

#: pcbnew/tools/pcb_actions.cpp:2324
#, fuzzy
msgid "Tune Length of a Differential Pair"
msgstr "차동 쌍의 길이를 조정"

#: pcbnew/tools/pcb_actions.cpp:2333
#, fuzzy
msgid "Tune Skew of a Differential Pair"
msgstr "차동 쌍의 스큐를 조정"

#: pcbnew/tools/pcb_actions.cpp:2334
msgid "Tune skew of a differential pair"
msgstr "차동 쌍의 스큐를 조정"

#: pcbnew/tools/pcb_actions.cpp:2349
msgid "Walks the current track back one segment."
msgstr "현재의 배선을 1 세그먼트만큼 되돌립니다."

#: pcbnew/tools/pcb_actions.cpp:2355
msgid "Route From Other End"
msgstr "다른 끝에서 경로"

#: pcbnew/tools/pcb_actions.cpp:2356
msgid ""
"Commits current segments and starts next segment from nearest ratsnest end."
msgstr ""
"현재 세그먼트를 커밋하고 가장 가까운 ratsnest 끝에서 다음 세그먼트를 시작합니"
"다."

#: pcbnew/tools/pcb_actions.cpp:2362
msgid "Attempt Finish"
msgstr "시도 완료"

#: pcbnew/tools/pcb_actions.cpp:2363
msgid "Attempts to complete current route to nearest ratsnest end."
msgstr "가장 가까운 ratnest 끝까지 현재 경로를 완료하려고 시도합니다."

#: pcbnew/tools/pcb_actions.cpp:2370
msgid "Route Selected"
msgstr "선택한 경로"

#: pcbnew/tools/pcb_actions.cpp:2371
msgid "Sequentially route selected items from ratsnest anchor."
msgstr "래트네스트 앵커에서 선택한 항목을 순차적으로 라우팅합니다."

#: pcbnew/tools/pcb_actions.cpp:2379
msgid "Route Selected From Other End"
msgstr "다른 끝에서 선택한 경로"

#: pcbnew/tools/pcb_actions.cpp:2380
msgid "Sequentially route selected items from other end of ratsnest anchor."
msgstr "래트네스트 앵커의 다른 끝에서 선택된 항목을 순차적으로 라우팅합니다."

#: pcbnew/tools/pcb_actions.cpp:2388
msgid "Attempt Finish Selected (Autoroute)"
msgstr "선택한 완료 시도(자동 경로)"

#: pcbnew/tools/pcb_actions.cpp:2389
msgid "Sequentially attempt to automatically route all selected pads."
msgstr "선택한 모든 패드를 자동으로 라우팅하도록 순차적으로 시도합니다."

#: pcbnew/tools/pcb_actions.cpp:2397
msgid ""
"Splits the track segment into two segments connected at the cursor position."
msgstr "배선 세그먼트를 커서 위치에 연결된 두 개의 세그먼트로 분리합니다."

#: pcbnew/tools/pcb_actions.cpp:2405
#, fuzzy
msgid "Drag 45 Degree Mode"
msgstr "드래그 (45도 모드)"

#: pcbnew/tools/pcb_actions.cpp:2406
msgid "Drags the track segment while keeping connected tracks at 45 degrees."
msgstr "배선과 45도 연결을 유지하면서 배선 세그먼트를 드래그합니다."

#: pcbnew/tools/pcb_actions.cpp:2414
#, fuzzy
msgid "Drag Free Angle"
msgstr "드래그 (자유 각도)"

#: pcbnew/tools/pcb_actions.cpp:2415
msgid ""
"Drags the nearest joint in the track without restricting the track angle."
msgstr ""
"배선 각도를 제한하지 않으면서 배선의 가장 가까운 연결부를 드래그합니다."

#: pcbnew/tools/pcb_actions.cpp:2425
msgid "Update All Tuning Patterns"
msgstr "모든 조정 패턴 업데이트"

#: pcbnew/tools/pcb_actions.cpp:2426
msgid "Attempt to re-tune existing tuning patterns within their bounds"
msgstr "기존 튜닝 패턴을 해당 범위 내에서 다시 조정 시도"

#: pcbnew/tools/pcb_actions.cpp:2433
#, fuzzy
msgid "Rebuild All Generators"
msgstr "생성기 제거"

#: pcbnew/tools/pcb_actions.cpp:2434
msgid "Rebuilds geometry of all generators"
msgstr "모든 생성기의 형상을 재구축"

#: pcbnew/tools/pcb_actions.cpp:2441
#, fuzzy
msgid "Rebuild Selected Generators"
msgstr "생성기 제거"

#: pcbnew/tools/pcb_actions.cpp:2442
msgid "Rebuilds geometry of selected generator(s)"
msgstr "선택한 생성기의 형상을 재구축"

#: pcbnew/tools/pcb_actions.cpp:2470
msgid "Generators Manager"
msgstr "생성기 관리자"

#: pcbnew/tools/pcb_actions.cpp:2471
msgid "Show a manager dialog for Generator objects"
msgstr "생성기 개체의 관리자 대화 상자 표시"

#: pcbnew/tools/pcb_control.cpp:234
msgid "Don't show again"
msgstr "다시 표시 안 함"

#: pcbnew/tools/pcb_control.cpp:248
#, c-format
msgid ""
"Not all zones are filled. Use Edit > Fill All Zones (%s) if you wish to see "
"all fills."
msgstr ""
"모든 영역이 채워지지 않았습니다. 모든 채워진 영역을 보기 위해서 편집 > 모든 "
"영역 채우기 (%s) 를 사용하세요."

#: pcbnew/tools/pcb_control.cpp:343
msgid "Dimmed"
msgstr "흐리게"

#: pcbnew/tools/pcb_control.cpp:344
#, fuzzy
msgid "Hidden"
msgstr "숨겨진 텍스트"

#: pcbnew/tools/pcb_control.cpp:353
msgid "Inactive Layer Display"
msgstr "비활성 레이어 표시"

#: pcbnew/tools/pcb_control.cpp:645
msgid "Item locked."
msgstr "항목이 잠겨 있습니다."

#: pcbnew/tools/pcb_control.cpp:860
msgid ""
"Warning: some pasted items were on layers which are not present in the "
"current board.\n"
"These items could not be pasted.\n"
msgstr ""
"경고 : 붙여 넣은 일부 항목은 현재 보드에 존재하지 않는 레이어에 있습니다.\n"
"이 항목은 붙여넣을 수 없습니다.\n"

#: pcbnew/tools/pcb_control.cpp:1026
msgid "Invalid clipboard contents"
msgstr "잘못된 클립보드 내용"

#: pcbnew/tools/pcb_control.cpp:1320
#, c-format
msgid ""
"Error loading board.\n"
"%s"
msgstr ""
"기판 불러오기 중 오류.\n"
"%s"

#: pcbnew/tools/pcb_control.cpp:1355
msgid "Append Board"
msgstr "보드 추가"

#: pcbnew/tools/pcb_control.cpp:1416
msgid "Active Layer"
msgstr "활성 레이어"

#: pcbnew/tools/pcb_control.cpp:1417 pcbnew/widgets/appearance_controls.cpp:373
#: pcbnew/widgets/appearance_controls_base.cpp:165
msgid "All Layers"
msgstr "모든 레이어"

#: pcbnew/tools/pcb_control.cpp:1429
msgid "Object Snapping"
msgstr "개체 스냅"

#: pcbnew/tools/pcb_control.cpp:1505
#, fuzzy, c-format
msgid "DP Gap Constraints: %s"
msgstr "너비 제한: 최소 %s"

#: pcbnew/tools/pcb_control.cpp:1552
msgid "Resolved clearance"
msgstr "확인된 클리어런스"

#: pcbnew/tools/pcb_control.cpp:1557
msgid "Actual clearance"
msgstr "실제 유격"

#: pcbnew/tools/pcb_control.cpp:1600
msgid "Resolved hole clearance"
msgstr "확인된 구멍 간격"

#: pcbnew/tools/pcb_control.cpp:1605
msgid "Actual hole clearance"
msgstr "실제 홀 유격"

#: pcbnew/tools/pcb_control.cpp:1638
msgid "Resolved edge clearance"
msgstr "확인된 가장자리 간격"

#: pcbnew/tools/pcb_control.cpp:1643
msgid "Resolved margin clearance"
msgstr "확인된 여유 간격"

#: pcbnew/tools/pcb_control.cpp:1654
msgid "Selected Items"
msgstr "선택한 항목"

#: pcbnew/tools/pcb_point_editor.cpp:677
#, fuzzy
msgid "Drag Corner"
msgstr "모서리 드래그"

#: pcbnew/tools/pcb_point_editor.cpp:745
#, fuzzy
msgid "Move Midpoint to Location"
msgstr "풋프린트 위치"

#: pcbnew/tools/pcb_point_editor.cpp:746
#, fuzzy
msgid "Move Midpoint"
msgstr "핀 이동"

#: pcbnew/tools/pcb_point_editor.cpp:750
#, fuzzy
msgid "Move Corner to Location"
msgstr "제거"

#: pcbnew/tools/pcb_point_editor.cpp:751
#, fuzzy
msgid "Move Corner"
msgstr "제거"

#: pcbnew/tools/pcb_point_editor.cpp:2404
#, fuzzy
msgid "Add Zone Corner"
msgstr "영역 모서리 추가"

#: pcbnew/tools/pcb_point_editor.cpp:2424
#, fuzzy
msgid "Split Segment"
msgstr "세그먼트 분리"

#: pcbnew/tools/pcb_point_editor.cpp:2496
#, fuzzy
msgid "Remove Zone Corner"
msgstr "코너 제거"

#: pcbnew/tools/pcb_point_editor.cpp:2498
#, fuzzy
msgid "Remove Polygon Corner"
msgstr "영역/다각형 모서리를 삭제"

#: pcbnew/tools/pcb_selection_tool.cpp:1270
msgid "Select/Expand Connection..."
msgstr "연결 선택/확장..."

#: pcbnew/tools/placement_tool.cpp:62
msgid "Align/Distribute"
msgstr "정렬/분포"

#: pcbnew/tools/placement_tool.cpp:429
#, fuzzy
msgid "Align to Middle"
msgstr "중간 맞춤"

#: pcbnew/tools/placement_tool.cpp:473
#, fuzzy
msgid "Align to Center"
msgstr "가운데 맞춤"

#: pcbnew/tools/position_relative_tool.cpp:146
msgid "Position Relative"
msgstr "상대 위치"

#: pcbnew/tools/position_relative_tool.cpp:166
msgid "Click on reference item..."
msgstr "참조 항목을 선택..."

#: pcbnew/tools/zone_create_helper.cpp:197
#, fuzzy
msgid "Add Zone Cutout"
msgstr "영역 컷아웃을 추가"

#: pcbnew/tools/zone_create_helper.cpp:229
msgid "Add a zone"
msgstr "영역 추가"

#: pcbnew/tools/zone_filler_tool.cpp:89
msgid "Checking Zones"
msgstr "영역 확인 중"

#: pcbnew/tools/zone_filler_tool.cpp:95 pcbnew/tools/zone_filler_tool.cpp:174
#: pcbnew/tools/zone_filler_tool.cpp:353
msgid "Fill Zone(s)"
msgstr "영역 채우기"

#: pcbnew/tools/zone_filler_tool.cpp:143 pcbnew/tools/zone_filler_tool.cpp:230
msgid "Show DRC rules"
msgstr "DRC 규칙 표시"

#: pcbnew/tools/zone_filler_tool.cpp:150 pcbnew/tools/zone_filler_tool.cpp:237
msgid "Rules"
msgstr "규칙"

#: pcbnew/tools/zone_filler_tool.cpp:156 pcbnew/tools/zone_filler_tool.cpp:243
msgid "Zone fills may be inaccurate.  DRC rules contain errors."
msgstr ""
"영역 채우기는 정확하지 않을 수 있습니다.  DRC 규칙은 오류를 포함합니다."

#: pcbnew/tools/zone_filler_tool.cpp:254
#, c-format
msgid "Refill %d Zones"
msgstr "%d개의 영역 다시 채우기"

#: pcbnew/tools/zone_filler_tool.cpp:263
msgid "Auto-fill Zone(s)"
msgstr "자동 채우기 영역"

#: pcbnew/tools/zone_filler_tool.cpp:274
#: pcbnew/widgets/appearance_controls.cpp:3324
msgid "Open Preferences"
msgstr "설정 열기"

#: pcbnew/tools/zone_filler_tool.cpp:286
msgid ""
"Automatic refill of zones can be turned off in Preferences if it becomes too "
"slow."
msgstr "영역 자동 채우기가 너무 느리면 환경설정에서 끌 수 있습니다."

#: pcbnew/tools/zone_filler_tool.cpp:347
msgid "Fill Zone"
msgstr "영역 채우기"

#: pcbnew/tools/zone_filler_tool.cpp:407
msgid "Unfill Zone"
msgstr "영역 채우기 제거"

#: pcbnew/tracks_cleaner.cpp:68
msgid "Checking null tracks and vias..."
msgstr "null 배선 및 비아를 확인하는 중..."

#: pcbnew/tracks_cleaner.cpp:70
msgid "Removing null tracks and vias..."
msgstr "null 배선 및 비아를 제거하는 중..."

#: pcbnew/tracks_cleaner.cpp:81
msgid "Checking redundant tracks..."
msgstr "필요 없는 배선 확인 중..."

#: pcbnew/tracks_cleaner.cpp:83
msgid "Removing redundant tracks..."
msgstr "필요 없는 배선 제거 중..."

#: pcbnew/tracks_cleaner.cpp:97
msgid "Checking shorting tracks..."
msgstr "단락 트랙 확인 중..."

#: pcbnew/tracks_cleaner.cpp:99
msgid "Removing shorting tracks..."
msgstr "단락 트랙 제거 중..."

#: pcbnew/tracks_cleaner.cpp:112
msgid "Checking tracks in pads..."
msgstr "패드의 배선 확인 중..."

#: pcbnew/tracks_cleaner.cpp:114
msgid "Removing tracks in pads..."
msgstr "패드에서 트랙을 제거하는 중..."

#: pcbnew/tracks_cleaner.cpp:128
msgid "Checking dangling tracks and vias..."
msgstr "댕글링 트랙 및 비아 확인 중..."

#: pcbnew/tracks_cleaner.cpp:133
msgid "Removing dangling tracks..."
msgstr "댕글링 트랙 제거 중..."

#: pcbnew/tracks_cleaner.cpp:136
msgid "Removing dangling vias..."
msgstr "댕글링 비아 제거 중..."

#: pcbnew/tracks_cleaner.cpp:150
msgid "Checking collinear tracks..."
msgstr "동일선상의 트랙 확인 중..."

#: pcbnew/tracks_cleaner.cpp:152
msgid "Merging collinear tracks..."
msgstr "동일 선상에 있는 트랙 병합 중..."

#: pcbnew/undo_redo.cpp:483
msgid "Incomplete undo/redo operation: some items not found"
msgstr "완료되지 않은 실행 취소/다시 실행 동작: 일부 항목을 찾을 수 없습니다"

#: pcbnew/widgets/appearance_controls.cpp:327
msgid "Show tracks"
msgstr "배선 표시"

#: pcbnew/widgets/appearance_controls.cpp:328
msgid "Show all vias"
msgstr "모든 비아 표시"

#: pcbnew/widgets/appearance_controls.cpp:329
msgid "Show all pads"
msgstr "모든 패드 표시"

#: pcbnew/widgets/appearance_controls.cpp:330
msgid "Show copper zones"
msgstr "구리 영역 표시"

#: pcbnew/widgets/appearance_controls.cpp:331
msgid "Images"
msgstr "이미지"

#: pcbnew/widgets/appearance_controls.cpp:331
msgid "Show user images"
msgstr "사용자 이미지 표시"

#: pcbnew/widgets/appearance_controls.cpp:333
msgid "Footprints Front"
msgstr "전면의 풋프린트"

#: pcbnew/widgets/appearance_controls.cpp:333
msgid "Show footprints that are on board's front"
msgstr "기판의 전면에 있는 풋프린트 표시"

#: pcbnew/widgets/appearance_controls.cpp:334
msgid "Footprints Back"
msgstr "후면의 풋프린트"

#: pcbnew/widgets/appearance_controls.cpp:334
msgid "Show footprints that are on board's back"
msgstr "기판의 후면에 있는 풋프린트 표시"

#: pcbnew/widgets/appearance_controls.cpp:335
msgid "Through-hole Pads"
msgstr "스루홀 패드"

#: pcbnew/widgets/appearance_controls.cpp:335
msgid "Show through-hole pads"
msgstr "스루홀 패드 표시"

#: pcbnew/widgets/appearance_controls.cpp:339
msgid "Hidden Text"
msgstr "숨겨진 텍스트"

#: pcbnew/widgets/appearance_controls.cpp:339
#, fuzzy
msgid "Show text marked as hidden"
msgstr "숨겨진 풋프린트 텍스트를 표시"

#: pcbnew/widgets/appearance_controls.cpp:342
msgid "Show unconnected nets as a ratsnest"
msgstr "연결되지 않은 네트를 연결선으로 표시"

#: pcbnew/widgets/appearance_controls.cpp:343
msgid "DRC Warnings"
msgstr "DRC 경고"

#: pcbnew/widgets/appearance_controls.cpp:343
msgid "DRC violations with a Warning severity"
msgstr "경고 수준의 DRC 위반"

#: pcbnew/widgets/appearance_controls.cpp:344
msgid "DRC Errors"
msgstr "DRC 오류"

#: pcbnew/widgets/appearance_controls.cpp:344
msgid "DRC violations with an Error severity"
msgstr "오류 수준의 DRC 위반"

#: pcbnew/widgets/appearance_controls.cpp:345
msgid "DRC Exclusions"
msgstr "DRC 제외"

#: pcbnew/widgets/appearance_controls.cpp:345
msgid "DRC violations which have been individually excluded"
msgstr "개별적으로 제외된 DRC 위반"

#: pcbnew/widgets/appearance_controls.cpp:346
msgid "Show footprint and text origins as a cross"
msgstr "풋프린트와 텍스트 원점을 십자로 표시"

#: pcbnew/widgets/appearance_controls.cpp:347
msgid "Locked Item Shadow"
msgstr "잠긴 항목 그림자"

#: pcbnew/widgets/appearance_controls.cpp:347
msgid "Show a shadow marker on locked items"
msgstr "잠긴 항목에 그림자 마커 표시"

#: pcbnew/widgets/appearance_controls.cpp:348
#, fuzzy
msgid "Conflict Footprint Shadow"
msgstr "충돌하는 항목의 그림자"

#: pcbnew/widgets/appearance_controls.cpp:348
#, fuzzy
msgid "Show a shadow marker on conflicting footprints"
msgstr "잠긴 항목에 그림자 마커 표시"

#: pcbnew/widgets/appearance_controls.cpp:349
msgid "Show drawing sheet borders and title block"
msgstr "도면 시트 경계선과 제목 블록 표시"

#: pcbnew/widgets/appearance_controls.cpp:371
msgid "No Layers"
msgstr "레이어가 없습니다"

#: pcbnew/widgets/appearance_controls.cpp:375
msgid "All Copper Layers"
msgstr "모든 구리 레이어"

#: pcbnew/widgets/appearance_controls.cpp:378
msgid "Inner Copper Layers"
msgstr "내부 구리 레이어"

#: pcbnew/widgets/appearance_controls.cpp:381
msgid "Front Layers"
msgstr "전면 레이어"

#: pcbnew/widgets/appearance_controls.cpp:384
msgid "Front Assembly View"
msgstr "전면에서 조립체 보기"

#: pcbnew/widgets/appearance_controls.cpp:387
msgid "Back Layers"
msgstr "후면 레이어"

#: pcbnew/widgets/appearance_controls.cpp:390
msgid "Back Assembly View"
msgstr "후면에서 조립체 보기"

#: pcbnew/widgets/appearance_controls.cpp:441
#, c-format
msgid ""
"Save and restore layer visibility combinations.\n"
"Use %s+Tab to activate selector.\n"
"Successive Tabs while holding %s down will cycle through presets in the "
"popup."
msgstr ""
"레이어 가시성 조합을 저장하고 복원합니다.\n"
"%s+Tab을 사용하여 선택기를 활성화합니다.\n"
"%s를 누른 상태에서 연속 탭을 누르면 팝업의 사전 설정이 순환됩니다."

#: pcbnew/widgets/appearance_controls.cpp:448
#, c-format
msgid ""
"Save and restore view location and zoom.\n"
"Use %s+Tab to activate selector.\n"
"Successive Tabs while holding %s down will cycle through viewports in the "
"popup."
msgstr ""
"뷰 방향과 확대/축소를 저장하고 복원합니다.\n"
"%s+Tab을 사용하여 선택기를 활성화합니다.\n"
"%s를 누른 상태에서 연속 탭하면 팝업의 뷰포트를 순환합니다."

#: pcbnew/widgets/appearance_controls.cpp:463
msgid "Filter nets"
msgstr "네트 필터링"

#: pcbnew/widgets/appearance_controls.cpp:609
#: pcbnew/widgets/appearance_controls.cpp:1770
msgid "Layer Display Options"
msgstr "레이어 표시 옵션"

#: pcbnew/widgets/appearance_controls.cpp:621
#: pcbnew/widgets/appearance_controls.cpp:1776
#, c-format
msgid "Inactive layers (%s):"
msgstr "비활성 레이어 (%s):"

#: pcbnew/widgets/appearance_controls.cpp:623
#: pcbnew/widgets/appearance_controls.cpp:1778
msgid "Inactive layers:"
msgstr "비활성 레이어:"

#: pcbnew/widgets/appearance_controls.cpp:637
#: pcbnew/widgets/appearance_controls.cpp:1783
msgid "Inactive layers will be shown in full color"
msgstr "활성화되지 않은 레이어를 풀 컬러로 표시"

#: pcbnew/widgets/appearance_controls.cpp:642
#: pcbnew/widgets/appearance_controls.cpp:1785
msgid "Dim"
msgstr "흐리기"

#: pcbnew/widgets/appearance_controls.cpp:644
#: pcbnew/widgets/appearance_controls.cpp:1786
msgid "Inactive layers will be dimmed"
msgstr "활성화되지 않은 레이어를 흐리게 표시"

#: pcbnew/widgets/appearance_controls.cpp:649
#: pcbnew/widgets/appearance_controls.cpp:1788
msgid "Hide"
msgstr "숨김"

#: pcbnew/widgets/appearance_controls.cpp:651
#: pcbnew/widgets/appearance_controls.cpp:1789
msgid "Inactive layers will be hidden"
msgstr "비활성화한 레이어는 숨겨짐"

#: pcbnew/widgets/appearance_controls.cpp:662
#: pcbnew/widgets/appearance_controls.cpp:1791
msgid "Flip board view"
msgstr "기판 뷰를 반전"

#: pcbnew/widgets/appearance_controls.cpp:684
#: pcbnew/widgets/appearance_controls.cpp:2463
msgid "Net Display Options"
msgstr "네트 표시 옵션"

#: pcbnew/widgets/appearance_controls.cpp:696
#: pcbnew/widgets/appearance_controls.cpp:2468
#, c-format
msgid "Net colors (%s):"
msgstr "네트 색상 (%s):"

#: pcbnew/widgets/appearance_controls.cpp:698
#: pcbnew/widgets/appearance_controls.cpp:2470
msgid "Net colors:"
msgstr "네트 색상:"

#: pcbnew/widgets/appearance_controls.cpp:703
#: pcbnew/widgets/appearance_controls.cpp:2473
msgid "Choose when to show net and netclass colors"
msgstr "네트 및 네트 클래스 색상을 표시할 시기 선택"

#: pcbnew/widgets/appearance_controls.cpp:712
#: pcbnew/widgets/appearance_controls.cpp:2476
msgid "Net and netclass colors are shown on all copper items"
msgstr "모든 구리 개체에 대해 네트와 네트클래스 색상 표시"

#: pcbnew/widgets/appearance_controls.cpp:720
#: pcbnew/widgets/appearance_controls.cpp:2479
msgid "Net and netclass colors are shown on the ratsnest only"
msgstr "연결선에 대해서만 네트와 네트클래스 색상 표시"

#: pcbnew/widgets/appearance_controls.cpp:727
#: pcbnew/widgets/appearance_controls.cpp:2482
msgid "Net and netclass colors are not shown"
msgstr "네트와 네트클래스 색상 표시하지 않음"

#: pcbnew/widgets/appearance_controls.cpp:738
#: pcbnew/widgets/appearance_controls.cpp:2487
#, c-format
msgid "Ratsnest display (%s):"
msgstr "연결선 표시 (%s):"

#: pcbnew/widgets/appearance_controls.cpp:740
#: pcbnew/widgets/appearance_controls.cpp:2489
msgid "Ratsnest display:"
msgstr "연결선 표시:"

#: pcbnew/widgets/appearance_controls.cpp:745
#: pcbnew/widgets/appearance_controls.cpp:2492
msgid "Choose which ratsnest lines to display"
msgstr "어떤 연결선을 표시할 지 선택"

#: pcbnew/widgets/appearance_controls.cpp:755
#: pcbnew/widgets/appearance_controls.cpp:2495
msgid "Show ratsnest lines to items on all layers"
msgstr "모든 레이어의 개체에 연결선 표시"

#: pcbnew/widgets/appearance_controls.cpp:760
#: pcbnew/widgets/appearance_controls.cpp:2497
msgid "Visible layers"
msgstr "표시 레이어"

#: pcbnew/widgets/appearance_controls.cpp:762
#: pcbnew/widgets/appearance_controls.cpp:2498
msgid "Show ratsnest lines to items on visible layers"
msgstr "표시 레이어의 개체에만 연결선 표시"

#: pcbnew/widgets/appearance_controls.cpp:769
#: pcbnew/widgets/appearance_controls.cpp:2501
msgid "Hide all ratsnest lines"
msgstr "모든 연결선 숨기기"

#: pcbnew/widgets/appearance_controls.cpp:920
msgid "Set Net Color"
msgstr "네트 색상 설정"

#: pcbnew/widgets/appearance_controls.cpp:922
#, fuzzy
msgid "Clear Net Color"
msgstr "선명한 색상"

#: pcbnew/widgets/appearance_controls.cpp:928
#, c-format
msgid "Highlight %s"
msgstr "강조 %s"

#: pcbnew/widgets/appearance_controls.cpp:931
#: pcbnew/widgets/appearance_controls.cpp:2330
#, c-format
msgid "Select Tracks and Vias in %s"
msgstr "%s의 배선과 비아 선택"

#: pcbnew/widgets/appearance_controls.cpp:934
#: pcbnew/widgets/appearance_controls.cpp:2333
#, c-format
msgid "Unselect Tracks and Vias in %s"
msgstr "%s의 배선과 비아 선택 해제"

#: pcbnew/widgets/appearance_controls.cpp:939
msgid "Show All Nets"
msgstr "모든 네트 보기"

#: pcbnew/widgets/appearance_controls.cpp:941
msgid "Hide All Other Nets"
msgstr "모든 다른 네트 숨기기"

#: pcbnew/widgets/appearance_controls.cpp:973
#, c-format
msgid "Click to hide ratsnest for %s"
msgstr "%s에 대한 연결선을 숨기려면 클릭"

#: pcbnew/widgets/appearance_controls.cpp:974
#, c-format
msgid "Click to show ratsnest for %s"
msgstr "%s에 대한 연결선을 표시하려면 클릭"

#: pcbnew/widgets/appearance_controls.cpp:983
msgid ""
"Double click (or middle click) to change color; right click for more actions"
msgstr "더블 클릭 (또는 가운데 클릭) 으로 색상 변경; 우클릭으로 다른 동작 선택"

#: pcbnew/widgets/appearance_controls.cpp:1022
#: pcbnew/widgets/appearance_controls_base.cpp:45
msgid "Objects"
msgstr "객체"

#: pcbnew/widgets/appearance_controls.cpp:1557
msgid "Double click or middle click for color change, right click for menu"
msgstr "더블 클릭 또는 가운데 클릭으로 색상 변경, 우클릭으로 메뉴 열기"

#: pcbnew/widgets/appearance_controls.cpp:1563
msgid "Show or hide this layer"
msgstr "이 레이어 표시 또는 숨기기"

#: pcbnew/widgets/appearance_controls.cpp:1636
msgid "Adhesive on board's front"
msgstr "기판 전면의 접착면"

#: pcbnew/widgets/appearance_controls.cpp:1637
msgid "Adhesive on board's back"
msgstr "기판 후면의 접착면"

#: pcbnew/widgets/appearance_controls.cpp:1638
msgid "Solder paste on board's front"
msgstr "기판 전면의 솔더 페이스트"

#: pcbnew/widgets/appearance_controls.cpp:1639
msgid "Solder paste on board's back"
msgstr "기판 후면의 솔더 페이스트"

#: pcbnew/widgets/appearance_controls.cpp:1640
msgid "Silkscreen on board's front"
msgstr "기판 전면의 실크스크린"

#: pcbnew/widgets/appearance_controls.cpp:1641
msgid "Silkscreen on board's back"
msgstr "기판 후면의 실크스크린"

#: pcbnew/widgets/appearance_controls.cpp:1642
msgid "Solder mask on board's front"
msgstr "기판 전면의 솔더 마스크"

#: pcbnew/widgets/appearance_controls.cpp:1643
msgid "Solder mask on board's back"
msgstr "기판 후면의 솔더 마스크"

#: pcbnew/widgets/appearance_controls.cpp:1644
msgid "Explanatory drawings"
msgstr "설명용 그림"

#: pcbnew/widgets/appearance_controls.cpp:1645
msgid "Explanatory comments"
msgstr "설명용 주석"

#: pcbnew/widgets/appearance_controls.cpp:1646
#: pcbnew/widgets/appearance_controls.cpp:1647
msgid "User defined meaning"
msgstr "사용자 정의"

#: pcbnew/widgets/appearance_controls.cpp:1648
msgid "Board's perimeter definition"
msgstr "기판 둘레 정의"

#: pcbnew/widgets/appearance_controls.cpp:1649
msgid "Board's edge setback outline"
msgstr "기판의 모서리 오프셋 외곽선"

#: pcbnew/widgets/appearance_controls.cpp:1650
msgid "Footprint courtyards on board's front"
msgstr "기판 전면의 풋프린트 부품자리"

#: pcbnew/widgets/appearance_controls.cpp:1651
msgid "Footprint courtyards on board's back"
msgstr "기판 후면의 풋프린트 부품자리"

#: pcbnew/widgets/appearance_controls.cpp:1652
msgid "Footprint assembly on board's front"
msgstr "기판 전면의 풋프린트 조립체"

#: pcbnew/widgets/appearance_controls.cpp:1653
msgid "Footprint assembly on board's back"
msgstr "기판 후면의 풋프린트 조립체"

#: pcbnew/widgets/appearance_controls.cpp:1654
msgid "User defined layer 1"
msgstr "사용자 정의 레이어 1"

#: pcbnew/widgets/appearance_controls.cpp:1655
msgid "User defined layer 2"
msgstr "사용자 정의 레이어 2"

#: pcbnew/widgets/appearance_controls.cpp:1656
msgid "User defined layer 3"
msgstr "사용자 정의 레이어 3"

#: pcbnew/widgets/appearance_controls.cpp:1657
msgid "User defined layer 4"
msgstr "사용자 정의 레이어 4"

#: pcbnew/widgets/appearance_controls.cpp:1658
msgid "User defined layer 5"
msgstr "사용자 정의 레이어 5"

#: pcbnew/widgets/appearance_controls.cpp:1659
msgid "User defined layer 6"
msgstr "사용자 정의 레이어 6"

#: pcbnew/widgets/appearance_controls.cpp:1660
msgid "User defined layer 7"
msgstr "사용자 정의 레이어 7"

#: pcbnew/widgets/appearance_controls.cpp:1661
msgid "User defined layer 8"
msgstr "사용자 정의 레이어 8"

#: pcbnew/widgets/appearance_controls.cpp:1662
msgid "User defined layer 9"
msgstr "사용자 정의 레이어 9"

#: pcbnew/widgets/appearance_controls.cpp:1710
msgid "Front copper layer"
msgstr "전면 구리 레이어"

#: pcbnew/widgets/appearance_controls.cpp:1711
msgid "Back copper layer"
msgstr "후면 구리 레이어"

#: pcbnew/widgets/appearance_controls.cpp:1712
msgid "Inner copper layer"
msgstr "내부 구리 레이어"

#: pcbnew/widgets/appearance_controls.cpp:1800
msgid "Show All Copper Layers"
msgstr "모든 구리 레이어 표시"

#: pcbnew/widgets/appearance_controls.cpp:1802
msgid "Hide All Copper Layers"
msgstr "모든 구리 레이어 숨기기"

#: pcbnew/widgets/appearance_controls.cpp:1813
msgid "Show All Non Copper Layers"
msgstr "모든 비 구리 레이어 표시"

#: pcbnew/widgets/appearance_controls.cpp:1817
msgid "Hide All Non Copper Layers"
msgstr "모든 비 구리 레이어 숨기기"

#: pcbnew/widgets/appearance_controls.cpp:1831
msgid "Show Only Front Assembly Layers"
msgstr "전면 조립 레이어만 표시"

#: pcbnew/widgets/appearance_controls.cpp:1834
msgid "Show Only Front Layers"
msgstr "전면 레이어만 표시"

#: pcbnew/widgets/appearance_controls.cpp:1841
msgid "Show Only Inner Layers"
msgstr "내부 레이어만 표시"

#: pcbnew/widgets/appearance_controls.cpp:1845
msgid "Show Only Back Layers"
msgstr "후면 레이어만 표시"

#: pcbnew/widgets/appearance_controls.cpp:1849
msgid "Show Only Back Assembly Layers"
msgstr "후면 조립 레이어만 표시"

#: pcbnew/widgets/appearance_controls.cpp:2210
#, c-format
msgid "Set opacity of %s"
msgstr "%s의 불투명도 설정"

#: pcbnew/widgets/appearance_controls.cpp:2320
msgid "Set Netclass Color"
msgstr "네트클래스 색상 설정"

#: pcbnew/widgets/appearance_controls.cpp:2327
#, c-format
msgid "Highlight Nets in %s"
msgstr "%s 내의 네트 강조 표시"

#: pcbnew/widgets/appearance_controls.cpp:2338
msgid "Show All Netclasses"
msgstr "모든 네트클래스 표시"

#: pcbnew/widgets/appearance_controls.cpp:2340
msgid "Hide All Other Netclasses"
msgstr "다른 모든 네트클래스 숨기기"

#: pcbnew/widgets/appearance_controls.cpp:2401
#, c-format
msgid "Show or hide ratsnest for nets in %s"
msgstr "%s 내의 네트 연결선 표시 또는 숨기기"

#: pcbnew/widgets/appearance_controls.cpp:3337
msgid ""
"The current color theme is read-only.  Create a new theme in Preferences to "
"enable color editing."
msgstr ""
"현재 색상 테마는 읽기 전용입니다.  설정에서 새로운 테마를 만들어 색상 편집을 "
"허용하세요."

#: pcbnew/widgets/appearance_controls_base.cpp:71
msgid "Show the Net Inspector"
msgstr "네트 검사기 표시"

#: pcbnew/widgets/appearance_controls_base.cpp:123
msgid "Configure net classes"
msgstr "네트 클래스 설정"

#: pcbnew/widgets/filedlg_hook_save_project.h:32
msgid "Create a new project for this board"
msgstr "이 기판으로부터 새로운 프로젝트 생성"

#: pcbnew/widgets/legacyfiledlg_netlist_options.h:35
msgid "Omit extra information"
msgstr "추가 정보 생략"

#: pcbnew/widgets/legacyfiledlg_netlist_options.h:36
msgid "Omit nets"
msgstr "네트 생략"

#: pcbnew/widgets/legacyfiledlg_netlist_options.h:38
msgid "Do not prefix path with footprint UUID."
msgstr "경로의 앞에 풋프린트 UUID를 붙이지 않습니다."

#: pcbnew/widgets/panel_footprint_chooser.cpp:334
msgid "No footprint selected"
msgstr "선택된 풋프린트 없음"

#: pcbnew/widgets/panel_selection_filter.cpp:146
#, c-format
msgid "Only %s"
msgstr "%s만"

#: pcbnew/widgets/panel_selection_filter.cpp:184
#: pcbnew/widgets/panel_selection_filter_base.cpp:23
msgid "Locked items"
msgstr "잠긴 항목"

#: pcbnew/widgets/panel_selection_filter.cpp:185
#: pcbnew/widgets/panel_selection_filter_base.cpp:25
msgid "Allow selection of locked items"
msgstr "잠긴 항목 선택 허용"

#: pcbnew/widgets/panel_selection_filter.cpp:193
#: pcbnew/widgets/panel_selection_filter_base.cpp:57
msgid "Rule Areas"
msgstr "규칙 영역"

#: pcbnew/widgets/panel_selection_filter.cpp:194
#: pcbnew/widgets/panel_selection_filter_base.cpp:61
msgid "Dimensions"
msgstr "치수"

#: pcbnew/widgets/panel_selection_filter.cpp:195
#: pcbnew/widgets/panel_selection_filter_base.cpp:65
msgid "Other items"
msgstr "기타 항목"

#: pcbnew/widgets/search_handlers.cpp:143 pcbnew/zone.cpp:584
#: pcbnew/zone.cpp:1634
msgid "Priority"
msgstr "우선순위"

#: pcbnew/widgets/search_handlers.cpp:246
msgid "Textbox"
msgstr "텍스트 상자"

#: pcbnew/widgets/search_handlers.cpp:274
#: pcbnew/widgets/search_handlers.cpp:353
#, fuzzy
msgid "Class"
msgstr "클래스 1"

#: pcbnew/widgets/search_handlers.cpp:307
#: pcbnew/widgets/search_handlers.cpp:391
msgid "No Net"
msgstr "네트 없음"

#: pcbnew/zone.cpp:547
msgid "Cutout"
msgstr "컷아웃"

#: pcbnew/zone.cpp:556
msgid "No vias"
msgstr "비아 없음"

#: pcbnew/zone.cpp:559
msgid "No tracks"
msgstr "배선 없음"

#: pcbnew/zone.cpp:562
msgid "No pads"
msgstr "패드 없음"

#: pcbnew/zone.cpp:565
msgid "No copper zones"
msgstr "구리 영역 없음"

#: pcbnew/zone.cpp:568
msgid "No footprints"
msgstr "풋프린트 없음"

#: pcbnew/zone.cpp:571
msgid "Restrictions"
msgstr "제한"

#: pcbnew/zone.cpp:599
#, c-format
msgid "%s"
msgstr "%s"

#: pcbnew/zone.cpp:609
#, c-format
msgid "%s, %s and %s"
msgstr "%s, %s 와 %s"

#: pcbnew/zone.cpp:616
#, c-format
msgid "%s, %s and %d more"
msgstr "%s, %s and %d 이상"

#: pcbnew/zone.cpp:634 pcbnew/zone.cpp:1643
msgid "Fill Mode"
msgstr "채우기 모드"

#: pcbnew/zone.cpp:636
msgid "Filled Area"
msgstr "채워진 영역"

#: pcbnew/zone.cpp:657
msgid "Corner Count"
msgstr "모서리 수"

#: pcbnew/zone.cpp:692
msgid "Rule Area"
msgstr "규칙 영역"

#: pcbnew/zone.cpp:694
msgid "Teardrop Area"
msgstr "눈물 방울 지역"

#: pcbnew/zone.cpp:696
msgid "Copper Zone"
msgstr "구리 영역"

#: pcbnew/zone.cpp:698
msgid "Non-copper Zone"
msgstr "비 구리 영역"

#: pcbnew/zone.cpp:833
#, fuzzy, c-format
msgid "on %s"
msgstr "on %s"

#: pcbnew/zone.cpp:837
#, fuzzy, c-format
msgid "on %s and %s"
msgstr "%s와%s"

#: pcbnew/zone.cpp:843
#, fuzzy, c-format
msgid "on %s, %s and %s"
msgstr "on %s, %s and %s"

#: pcbnew/zone.cpp:850
#, c-format
msgid "on %s, %s and %zu more"
msgstr "on %s, %s and %zu 이상"

#: pcbnew/zone.cpp:860
#, fuzzy, c-format
msgid "Rule Area Cutout %s"
msgstr "%s의 규칙 영역 컷아웃"

#: pcbnew/zone.cpp:862
#, fuzzy, c-format
msgid "Zone Cutout %s"
msgstr "%s의 영역 컷아웃"

#: pcbnew/zone.cpp:867
#, c-format
msgid "Rule Area %s"
msgstr "규칙 영역 %s"

#: pcbnew/zone.cpp:869
#, fuzzy, c-format
msgid "Zone %s %s"
msgstr "영역 %s (%s 상의)"

#: pcbnew/zone.cpp:1665
#, fuzzy
msgid "Cannot be less than zone minimum width"
msgstr "단열 살 너비는 최소 너비보다 작을 수 없습니다."

#: pcbnew/zone.cpp:1671
#, fuzzy
msgid "Hatch Width"
msgstr "해치 너비:"

#: pcbnew/zone.cpp:1678
#, fuzzy
msgid "Hatch Gap"
msgstr "해치 간격:"

#: pcbnew/zone.cpp:1685
msgid "Hatch Minimum Hole Ratio"
msgstr ""

#: pcbnew/zone.cpp:1693
#, fuzzy
msgid "Smoothing Effort"
msgstr "다듬기 작업:"

#: pcbnew/zone.cpp:1699
#, fuzzy
msgid "Smoothing Amount"
msgstr "다듬기 양:"

#: pcbnew/zone.cpp:1705
#, fuzzy
msgid "Remove Islands"
msgstr "고립된 영역 제거:"

#: pcbnew/zone.cpp:1710
#, fuzzy
msgid "Minimum Island Area"
msgstr "고립된 영역 최소 크기:"

#: pcbnew/zone.cpp:1725
msgid "Minimum Width"
msgstr "최소 폭"

#: pcbnew/zone.cpp:1733
msgid "Pad Connections"
msgstr "패드 연결"

#: pcbnew/zone_filler.cpp:106
msgid "Checking zone fills..."
msgstr "영역 채우기 확인 중..."

#: pcbnew/zone_filler.cpp:107
msgid "Building zone fills..."
msgstr "영역 채우기 실행 중..."

#: pcbnew/zone_filler.cpp:521
msgid "Removing isolated copper islands..."
msgstr "고립된 구리 영역 제거 중..."

#: pcbnew/zone_filler.cpp:730
msgid "Zone fills are out-of-date. Refill?"
msgstr "영역 채우기가 오래되었습니다. 다시 채울까요?"

#: pcbnew/zone_filler.cpp:732
msgid "Refill"
msgstr "다시 채우기"

#: pcbnew/zone_filler.cpp:732
msgid "Continue without Refill"
msgstr "채우지 않고 계속"

#: pcbnew/zones.h:60
msgid "inherited"
msgstr "승계"

#: pcbnew/zones.h:62
msgid "thermal reliefs"
msgstr "단열판"

#: pcbnew/zones.h:63
msgid "solid"
msgstr "실선"

#: pcbnew/zones.h:64
msgid "thermal reliefs for PTH"
msgstr "PTH용 단열판"

#: plugins/3d/vrml/vrml.cpp:237
msgid "[INFO] load failed: input line too long\n"
msgstr "[INFO] 불러오기 실패: 입력 행이 너무 깁니다\n"

#: resources/linux/launchers/org.kicad.bitmap2component.desktop.in:6
#, fuzzy
msgid "bitmap2component;Bitmap;Converter;"
msgstr "bitmap2component;Bitmap;Converter;"

#: resources/linux/launchers/org.kicad.bitmap2component.desktop.in:12
msgid "Bitmap to Component Converter"
msgstr "비트맵을 부품으로 변환"

#: resources/linux/launchers/org.kicad.bitmap2component.desktop.in:13
msgid "Create a component from a bitmap for use with KiCad"
msgstr "비트맵으로부터 KiCad용 부품 생성"

#: resources/linux/launchers/org.kicad.eeschema.desktop.in:11
msgid "KiCad Schematic Editor (Standalone)"
msgstr "KiCad 회로도 편집기 (스탠드얼론)"

#: resources/linux/launchers/org.kicad.eeschema.desktop.in:12
msgid "Schematic Capture Tool"
msgstr "회로도 캡쳐 도구"

#: resources/linux/launchers/org.kicad.eeschema.desktop.in:13
msgid "Standalone schematic editor for KiCad schematics"
msgstr "KiCad 회로도용 스탠드얼론 회로도 편집기"

#: resources/linux/launchers/org.kicad.eeschema.desktop.in:14
msgid "eeschema"
msgstr "eeschema"

#: resources/linux/launchers/org.kicad.gerbview.desktop.in:12
msgid "Gerber File Viewer"
msgstr "거버 파일 뷰어"

#: resources/linux/launchers/org.kicad.gerbview.desktop.in:13
msgid "View Gerber files"
msgstr "거버 파일 보기"

#: resources/linux/launchers/org.kicad.gerbview.desktop.in:14
msgid "gerbview;PCB;Gerber;"
msgstr "gerbview;PCB;거버;"

#: resources/linux/launchers/org.kicad.kicad.desktop.in:10
msgid "Projectmanager;"
msgstr "프로젝트 관리자;"

#: resources/linux/launchers/org.kicad.kicad.desktop.in:13
msgid "EDA Suite"
msgstr "EDA 제품군"

#: resources/linux/launchers/org.kicad.kicad.desktop.in:14
msgid "Suite of tools for schematic design and circuit board layout"
msgstr "회로도 디자인 및 회로 기판 레이아웃을 위한 도구 모음"

#: resources/linux/launchers/org.kicad.pcbcalculator.desktop.in:10
msgid "KiCad PCB Calculator"
msgstr "KiCad PCB 계산기"

#: resources/linux/launchers/org.kicad.pcbcalculator.desktop.in:11
msgid "PCB;Calculator;"
msgstr "PCB;계산기;"

#: resources/linux/launchers/org.kicad.pcbcalculator.desktop.in:12
msgid "PCB Calculator"
msgstr "PCB 계산기"

#: resources/linux/launchers/org.kicad.pcbcalculator.desktop.in:13
msgid "Calculator for various electronics-related computations"
msgstr "여러 전자 관련 계산을 위한 계산기"

#: resources/linux/launchers/org.kicad.pcbnew.desktop.in:5
msgid "pcbnew;PCB;Circuit;Layout;Design;Editor;Footprint;"
msgstr "pcbnew;PCB;회로;레이아웃;디자인;편집기;풋프린트;"

#: resources/linux/launchers/org.kicad.pcbnew.desktop.in:12
msgid "KiCad PCB Editor (Standalone)"
msgstr "KiCad PCB 편집기 (독립실행)"

#: resources/linux/launchers/org.kicad.pcbnew.desktop.in:13
msgid "PCB layout editor"
msgstr "PCB 레이아웃 편집기"

#: resources/linux/launchers/org.kicad.pcbnew.desktop.in:14
msgid "Standalone circuit board editor for KiCad boards"
msgstr "KiCad 기판을 위한 스탠드얼론 회로 기판 편집기"

#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:13
msgid "An EDA suite for schematic and circuit board design"
msgstr "회로도 및 회로 기판 설계를 위한 EDA 제품군"

#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:34
msgid "EDA"
msgstr "EDA"

#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:37
msgid "Circuit board"
msgstr "회로 기판"

#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:51
msgid ""
"KiCad is a free and open-source electronics design automation (EDA) suite. "
"It features schematic capture, integrated circuit simulation, printed "
"circuit board (PCB) layout, 3D rendering, and plotting/data export to "
"numerous formats. KiCad also includes a high-quality component library "
"featuring thousands of symbols, footprints, and 3D models. KiCad has minimal "
"system requirements and runs on Linux, Windows, and macOS."
msgstr ""
"KiCad는 무료 오픈소스 전자 설계 자동화 (EDA) 제품군입니다. 회로도 캡쳐, 집적"
"회로 시뮬레이션, 인쇄 회로 기판 (PCB) 레이아웃, 3D 렌더링, 다양한 형식으로의 "
"플로팅 / 데이터 내보내기 등의 기능이 있습니다. KiCad는 수천여 개의 심볼, 풋프"
"린트, 3D 모델이 포함된 높은 퀄리티의 컴포넌트 라이브러리가 포함되어 있습니"
"다. KiCad는 최소한의 시스템 요건을 가지고 있으며, Linux, Windows와 MacOS에서 "
"작동합니다."

#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:58
msgid "KiCad Main Window"
msgstr "KiCad 메인 창"

#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:68
msgid "KiCad PCB Layout Editor"
msgstr "KiCad PCB 레이아웃 편집기"

#: resources/linux/metainfo/org.kicad.kicad.metainfo.xml.in:85
msgid "The KiCad Developers"
msgstr "KiCad 개발자들"

#: resources/linux/mime/kicad-gerbers.xml.in:5
msgid "Gerber file"
msgstr "거버 파일"

#: resources/linux/mime/kicad-gerbers.xml.in:27
msgid "Excellon drill file"
msgstr "Excellon 드릴 파일"

#: resources/linux/mime/kicad-kicad.xml.in:5
msgid "KiCad Project"
msgstr "KiCad 프로젝트"

#: resources/linux/mime/kicad-kicad.xml.in:12
msgid "KiCad Schematic"
msgstr "KiCad 회로도"

#: resources/linux/mime/kicad-kicad.xml.in:27
msgid "KiCad Printed Circuit Board"
msgstr "KiCad 인쇄 회로 기판"

#: resources/linux/mime/kicad-kicad.xml.in:41
#, fuzzy
msgid "KiCad Footprint"
msgstr "KiCad 풋프린트 편집기"

#: resources/linux/mime/kicad-kicad.xml.in:55
#, fuzzy
msgid "KiCad Schematic Symbol"
msgstr "회로도 심볼"

#: resources/linux/mime/kicad-kicad.xml.in:69
#, fuzzy
msgid "KiCad Drawing Sheet"
msgstr "KiCad 도면 시트 편집기"

#~ msgid ""
#~ "Would you like to save the router\n"
#~ "event log for debugging purposes?"
#~ msgstr ""
#~ "디버깅을 위한 라우팅 이벤트 로그를\n"
#~ "저장하시겠습니까?"

#~ msgid "Exclude from schematic bill of materials"
#~ msgstr "회로도 자재 명세서에서 제외"

#~ msgid "Convert Symbol"
#~ msgstr "심볼 변경"

#~ msgid "<b>A Power Symbol should have no convert option</b><br><br>"
#~ msgstr "<b>전원 심볼에는 변환 옵션이 없어야 함</b><br><br>"

#~ msgid "Export Settings to Other Similar Zones"
#~ msgstr "다른 유사한 영역으로 설정 내보내기"

#~ msgid ""
#~ "Export this zone setup (excluding layer and net selection) to other "
#~ "similar copper zones (teardrops or usual copper zones)."
#~ msgstr ""
#~ "이 영역 설정(레이어 및 네트 선택 제외)을 다른 유사한 구리 영역(눈물 방울 "
#~ "또는 일반 구리 영역)으로 내보냅니다."

#~ msgid "Do you wish to delete excluded markers as well?"
#~ msgstr "제외된 마커도 함께 삭제하시겠습니까?"

#~ msgid "Delete exclusions"
#~ msgstr "제외 삭제"

#~ msgid "Tune Length"
#~ msgstr "길이 조정"

#, fuzzy
#~ msgid "Tune length of a single track or differential pair"
#~ msgstr "차동 쌍의 길이를 조정"

#~ msgid "Enter the text placed on selected layer."
#~ msgstr "선택한 레이어에 위치할 텍스트를 입력하세요."

#~ msgid "no"
#~ msgstr "아니오"

#~ msgid "yes"
#~ msgstr "예"

#~ msgid "Converted"
#~ msgstr "변환"

#, c-format
#~ msgid ""
#~ "<b>Duplicate pin %s</b> %s at location <b>(%.3f, %.3f)</b> conflicts with "
#~ "pin %s%s at location <b>(%.3f, %.3f)</b> of converted."
#~ msgstr ""
#~ "<b> 중복되는 핀 %s</b> %s (위치 <b>(%.3f, %.3f)</b>) 가 변환된 핀 %s%s (위"
#~ "치 <b>(%.3f, %.3f)</b>) 와 충돌합니다."

#, c-format
#~ msgid ""
#~ "<b>Duplicate pin %s</b> %s at location <b>(%.3f, %.3f)</b> conflicts with "
#~ "pin %s%s at location <b>(%.3f, %.3f)</b> in units %s and %s of converted."
#~ msgstr ""
#~ "<b> 중복되는 핀 %s</b> %s (위치 <b>(%.3f, %.3f)</b>) 가 핀 %s%s (위치 "
#~ "<b>(%.3f, %.3f)</b>) 와 충돌합니다 (단위 %s와 %s 변환됨)."

#, c-format
#~ msgid ""
#~ "Info: <b>Hidden power pin %s</b> %s at location <b>(%s, %s)</b> of "
#~ "converted."
#~ msgstr ""
#~ "<b>숨은 전원 핀 %s</b> %s이(가) 위치 <b>(%s, %s)</b> 에서 발견되었습니다 "
#~ "(변환됨)."

#, c-format
#~ msgid ""
#~ "<b>Off grid pin %s</b> %s at location <b>(%.3s, %.3s)</b> in unit %c of "
#~ "converted."
#~ msgstr ""
#~ "<b>그리드에서 벗어난 핀 %s</b> %s이(가) 위치 <b>(%.3s, %.3s)</b> 에서 발견"
#~ "되었습니다 (변환된 유닛 %c)."

#~ msgid "Convert"
#~ msgstr "변환"

#~ msgid "Symbol must have a newName."
#~ msgstr "심볼에는 새 이름을 지정해야 함."

#~ msgid "Allow bridged solder mask apertures between pads settings differ."
#~ msgstr "패드 간에 브리지 솔더 마스크 구멍 설정이 다를 수 있도록 허용합니다."

#~ msgid "Exempt from courtyard requirement settings differ."
#~ msgstr "부품자리 요구 사항 설정에서 제외됨."

#~ msgid "no symbol selected"
#~ msgstr "선택한 심볼이 없습니다"

#~ msgid "symbol is not multi-unit"
#~ msgstr "심볼은 다중 단위가 아닙니다"

#, fuzzy
#~ msgid "no pin selected"
#~ msgstr "<선택되지 않음>"

#, fuzzy
#~ msgid "no alternate pin functions defined"
#~ msgstr "대체 핀 정의"

#, fuzzy
#~ msgid "Toggle Exclude from BOM"
#~ msgstr "BOM에서 제외"

#~ msgid "Generate BOM..."
#~ msgstr "BOM 생성..."

#, fuzzy
#~ msgid "Generate BOM (Legacy)..."
#~ msgstr "BOM 생성..."

#, fuzzy
#~ msgid "Offset X"
#~ msgstr "X 오프셋:"

#, fuzzy
#~ msgid "Offset Y"
#~ msgstr "Y 오프셋:"

#, fuzzy
#~ msgid "Rotation CCW"
#~ msgstr "회전"

#~ msgid "Zero format"
#~ msgstr "0 표시 형식"

#, fuzzy
#~ msgid ""
#~ "Output units; ascii or csv format only; valid options: mm, m, in, tenths"
#~ msgstr "출력 단위; ASCII 또는 CSV 형식만 해당; 유효한 옵션: in,mm"

#~ msgid "Max width:"
#~ msgstr "최대 너비:"

#~ msgid "Min clearance"
#~ msgstr "최소 클리어런스"

#~ msgid "VRML Units for Output Files"
#~ msgstr "출력 파일에서 사용되는 VRML 단위"

#, fuzzy
#~ msgid "Pos X:"
#~ msgstr "위치 X"

#, fuzzy
#~ msgid "Amplitude (A) min:"
#~ msgstr "최소 진폭 (Amin):"

#, fuzzy
#~ msgid "Max track width:"
#~ msgstr "최소 배선폭:"

#, fuzzy
#~ msgid "Max track width"
#~ msgstr "최소 배선 폭"

#~ msgid "BOM..."
#~ msgstr "부품 목록..."

#, fuzzy
#~ msgid "Reset View"
#~ msgstr "보기 재설정"

#~ msgid "Reset view"
#~ msgstr "보기 재설정"

#~ msgid ">>"
#~ msgstr ">>"

#~ msgid "OUTPUTSTREAM_OUTPUTFORMATTER write error"
#~ msgstr "OUTPUTSTREAM_OUTPUTFORMATTER 쓰기 오류"

#, fuzzy
#~ msgid "current"
#~ msgstr "전류"

#, c-format
#~ msgid ""
#~ "The automatic save master file\n"
#~ "'%s'\n"
#~ "could not be deleted."
#~ msgstr ""
#~ "자동 저장 마스터 파일\n"
#~ "'%s'은(는)\n"
#~ "삭제될 수 없습니다."

#~ msgid ""
#~ "This file must be manually removed or the auto save feature will be\n"
#~ "shown every time the schematic editor is launched."
#~ msgstr ""
#~ "이 파일은 수동으로 제거해야 하며 자동 저장 기능은\n"
#~ "회로도 편집기가 시작될 때마다 표시됩니다."

#~ msgid "Unable to read string, input is empty."
#~ msgstr "문자열을 읽을 수 없으며 입력이 비어 있습니다."

#~ msgid "Finish drawing shape"
#~ msgstr "형상 그리기 완료"

#~ msgid "Finish Sheet"
#~ msgstr "시트 완료"

#~ msgid "Finish drawing sheet"
#~ msgstr "시트 그리기 종료"

#~ msgid "Finish Wire or Bus"
#~ msgstr "도선 또는 버스 종료"

#~ msgid "Complete drawing at current segment"
#~ msgstr "현재 세그먼트 그리기 완료"

#~ msgid "Finish Wire"
#~ msgstr "도선 종료"

#~ msgid "Complete wire with current segment"
#~ msgstr "현재 세그먼트에서 도선 작성 완료"

#~ msgid "Complete bus with current segment"
#~ msgstr "현재 세그먼트에서 버스 작성 완료"

#~ msgid "Finish Lines"
#~ msgstr "라인 종료"

#~ msgid "Complete connected lines with current segment"
#~ msgstr "현재 세그먼트에서 라인 연결 완료"

#~ msgid "Export tracks (extremely time consuming)"
#~ msgstr "트랙 내보내기(시간이 많이 소요됨)"

#, fuzzy
#~ msgid "Export zones (extremely time consuming)"
#~ msgstr "트랙 내보내기(시간이 많이 소요됨)"

#~ msgid "Export tracks (time consuming)"
#~ msgstr "트랙 내보내기(시간 소요)"

#, fuzzy
#~ msgid "(as a percentage of pad size)"
#~ msgstr "추가 클리어런스는 패드 사이즈에 대해 백분율로 지정됩니다."

#~ msgid ""
#~ "Note: a blank reference designator or value will use the footprint name."
#~ msgstr "참고: 빈 참조 지정자 또는 값은 풋프린트 이름을 사용합니다."

#, fuzzy
#~ msgid "(as a percentage of larger track width)"
#~ msgstr "차동 쌍 배선 폭"

#, fuzzy
#~ msgid "Library description"
#~ msgstr "드로우 설정:"

#~ msgid "Tune Skew"
#~ msgstr "왜곡 조정"

#~ msgid "Target skew:"
#~ msgstr "타겟 스큐:"

#, fuzzy
#~ msgid "Set layer:"
#~ msgstr "시작 레이어:"

#~ msgid "Altium PCB footprint library files"
#~ msgstr "Altium PCB 풋프린트 라이브러리 파일"

#~ msgid "Finish Track"
#~ msgstr "배선 완료"

#~ msgid "Stops laying the current track."
#~ msgstr "현재 배선의 배치를 중단합니다."

#~ msgid "Grid Options"
#~ msgstr "그리드 설정"

#~ msgid "Cursor Options"
#~ msgstr "커서 설정"

#~ msgid "Create Logo File"
#~ msgstr "로고 파일 생성"

#~ msgid "Icon scale:"
#~ msgstr "아이콘 배율:"

#~ msgid "Grey"
#~ msgstr "회색"

#~ msgid "Image Scale:"
#~ msgstr "이미지 배율:"

#~ msgid "Save Report to File"
#~ msgstr "보고서 파일 저장"

#~ msgid "Select with Browser"
#~ msgstr "브라우저에서 선택"

#~ msgid "Selected Output Filename"
#~ msgstr "선택된 출력 파일명"

#, c-format
#~ msgid "Choose Power Symbol (%d items loaded)"
#~ msgstr "전원 심볼 선택 (%d개 항목 불러옴)"

#, c-format
#~ msgid "Choose Symbol (%d items loaded)"
#~ msgstr "심볼 선택 (%d개 항목 불러옴)"

#~ msgid "Image File Name"
#~ msgstr "이미지 파일 이름"

#~ msgid "Board File Name"
#~ msgstr "기판 파일 이름"

#~ msgid "Load File to Edit"
#~ msgstr "편집할 파일 불러오기"

#~ msgid "Choose package file"
#~ msgstr "패키지 파일 선택"

#~ msgid "Open"
#~ msgstr "열기"

#~ msgid "Save As"
#~ msgstr "다른 이름으로 저장"

#~ msgid "Select a STEP export filename"
#~ msgstr "STEP 내보내기 파일명을 지정"

#~ msgid "temp"
#~ msgstr "temp"

#~ msgid "uVia Diameter"
#~ msgstr "마이크로비아 직경"

#~ msgid "Select Netlist"
#~ msgstr "네트리스트 선택"

#~ msgid "Single Track Length Tuning"
#~ msgstr "단일 배선 길이 조율"

#~ msgid "Differential Pair Length Tuning"
#~ msgstr "차동 쌍 길이 조율"

#~ msgid "Differential Pair Skew Tuning"
#~ msgstr "차동 쌍 스큐 조율"

#~ msgid "Length / Skew"
#~ msgstr "길이 / 스큐"

#~ msgid "Tune from:"
#~ msgstr "조정 전:"

#~ msgid "Tune to:"
#~ msgstr "조정 후:"

#~ msgid "Constraint:"
#~ msgstr "제약:"

#~ msgid "From Design Rules"
#~ msgstr "설계 규칙에서"

#~ msgid "Meandering"
#~ msgstr "미앤더링"

#~ msgid "Miter style:"
#~ msgstr "마이터 스타일:"

#~ msgid "45 degree"
#~ msgstr "45도"

#~ msgid "arc"
#~ msgstr "호"

#~ msgid "Miter radius (r):"
#~ msgstr "마이터 반경 (r):"

#~ msgid "Trace Length Tuning"
#~ msgstr "추적 길이 조율"

#, fuzzy
#~ msgid "Apply board defaults to footprint text && graphics"
#~ msgstr "회로도 개인 텍스트 및 그래픽"

#, fuzzy
#~ msgid "Format Footprints when Added to Board"
#~ msgstr "풋프린트를 편집기로 내보내기"

#~ msgid "Drill out of range"
#~ msgstr "드릴 허용 범위 벗어남"

#~ msgid "3D model scale doesn't match: "
#~ msgstr "3D 모델 배율이 일치하지 않음: "

#~ msgid "3D model rotation doesn't match: "
#~ msgstr "3D 모델 회전이 일치하지 않음: "

#~ msgid "3D model offset doesn't match: "
#~ msgstr "3D 모델 오프셋이 일치하지 않음: "

#~ msgid "3D model opacity doesn't match: "
#~ msgstr "3D 모델 불투명도가 일치하지 않음: "

#~ msgid "3D model doesn't match: "
#~ msgstr "3D 모델이 일치하지 않음: "

#~ msgid "3D model visibility doesn't match: "
#~ msgstr "3D 모델 가시성이 일치하지 않음: "

#~ msgid "3D model count differs."
#~ msgstr "3D 모델 수가 다릅니다."

#~ msgid "Footprint Image File Name"
#~ msgstr "풋프린트 이미지 파일명"

#~ msgid "KiCad Footprint Library Viewer"
#~ msgstr "KiCad 풋프린트 라이브러리 뷰어"

#, fuzzy
#~ msgid "Manage footprint libraries"
#~ msgstr "풋프린트 라이브러리 관리..."

#, fuzzy, c-format
#~ msgid ""
#~ "Footprint library not found. The current configuration does not include "
#~ "library '%s'."
#~ msgstr "현재 구성에 라이브러리 '%s'이(가) 포함되어 있지 않습니다."

#, fuzzy, c-format
#~ msgid ""
#~ "Footprint library not enabled. Library '%s' is not enabled in the current "
#~ "configuration."
#~ msgstr ""
#~ "라이브러리 '%s'이(가) 현재 구성에서 사용하도록 설정되어 있지 않습니다."

#~ msgid "doc url"
#~ msgstr "doc url"

#~ msgid "Open File"
#~ msgstr "파일 열기"

#~ msgid "Graphic layer:"
#~ msgstr "그래픽 레이어:"

#~ msgid "Bitmap Properties"
#~ msgstr "비트맵 속성"

#, c-format
#~ msgid "Width Constraints: min %s, max %s"
#~ msgstr "너비 제한: 최소 %s, 최대 %s"

#~ msgid "New Track"
#~ msgstr "새 배선"

#~ msgid "Starts laying a new track."
#~ msgstr "새로운 배선을 시작합니다."

#~ msgid "End Track"
#~ msgstr "배선 종료"

#~ msgid "Stops laying the current meander."
#~ msgstr "현재 진행중인 미앤더 배선을 중지합니다."

#~ msgid "Length Tuner"
#~ msgstr "길이 조정기"

#~ msgid "?"
#~ msgstr "?"

#~ msgid "Too long: skew "
#~ msgstr "너무 긺: 스큐 "

#~ msgid "Too short: skew "
#~ msgstr "너무 짧음: 스큐 "

#~ msgid "Spoke width resolution for:"
#~ msgstr "스포크 폭 해상도:"

#~ msgid "Spoke count resolution for:"
#~ msgstr "스포크 수 해상도:"

#, c-format
#~ msgid "Width constraints: min %s; opt %s; max %s."
#~ msgstr "폭 제약: 최소 %s; 최적 %s; 최대 %s."

#, c-format
#~ msgid "Diameter constraints: min %s; opt %s; max %s."
#~ msgstr "직경 제한: 최소 %s; 최적 %s; 최대 %s."

#, c-format
#~ msgid "Annular width constraints: min %s; opt %s; max %s."
#~ msgstr "랜드 폭 제약: 최소 %s; 최적 %s; 최대 %s."

#, c-format
#~ msgid "Text height constraints: min %s; opt %s; max %s."
#~ msgstr "글자 높이 제약: 최소 %s; 최적 %s; 최대 %s."

#, c-format
#~ msgid "Text thickness constraints: min %s; opt %s; max %s."
#~ msgstr "글자 폭 제약: 최소 %s; 최적 %s; 최대 %s."

#~ msgid "Recombine pad"
#~ msgstr "패드 재결합"

#~ msgid "Edit pad shapes"
#~ msgstr "패드 모양 편집"

#~ msgid "Add bitmap image"
#~ msgstr "비트맵 이미지 추가"

#~ msgid "Length Tuning Settings..."
#~ msgstr "길이 조절 설정..."

#~ msgid "Sets the length tuning parameters for currently routed item."
#~ msgstr "현재 라우팅된 항목의 길이 조율 매개변수를 설정합니다."

#~ msgid "Select Drawing Sheet File"
#~ msgstr "도면 시트 파일 선택"

#~ msgid "&About KiCad"
#~ msgstr "KiCad 정보 (&A)"

#, c-format
#~ msgid "Could not write BOM output to '%s'."
#~ msgstr "BOM 출력을 '%s'에 쓸 수 없습니다."

#~ msgid "Symbol pin or wire end off grid"
#~ msgstr "심볼 핀 또는 와이어 끝 오프 그리드"

#, c-format
#~ msgid ""
#~ "Inconsitent pin numbers in symbol %s compared to the one defined in part "
#~ "%s. The part was not loaded."
#~ msgstr ""
#~ "심볼의 핀 번호가 %s 에 정의된 것과 부품 %s이 일치하지 않아 부품이 로드되"
#~ "지 않았습니다."

#, c-format
#~ msgid ""
#~ "'%s' is an Eagle binary-format schematic file; only Eagle XML-format "
#~ "schematics can be imported."
#~ msgstr ""
#~ "'%s' 은 Eagle 바이너리 형식의 회로도 파일이며, Eagle XML 형식의 회로도만 "
#~ "가져올 수 있습니다."

#~ msgid "KiCad Symbol Library Viewer"
#~ msgstr "KiCad 심볼 라이브러리 뷰어"

#~ msgid "Choose symbol"
#~ msgstr "심볼 선택"

#~ msgid "Open simulation workbook"
#~ msgstr "시뮬레이션 워크북 열기"

#~ msgid "Save package"
#~ msgstr "패키지 저장"

#~ msgid ""
#~ "Locked footprints cannot be freely moved and oriented on the canvas and "
#~ "can only be selected when the 'Locked items' checkbox is enabled in the "
#~ "selection filter."
#~ msgstr ""
#~ "풋프린트가 잠겨있어 캔버스상에서 자유롭게 움직이거나 방향을 바꿀 수 없으"
#~ "며, 선택 필터의 '잠긴 항목' 체크박스가 활성화된 경우에만 선택할 수 있습니"
#~ "다."

#~ msgid "Set to net class values:"
#~ msgstr "네트 클래스 값으로 설정:"

#~ msgid "Trace gap:"
#~ msgstr "배선 간 간격 추적:"

#~ msgid "Min spacing (s):"
#~ msgstr "최소 간격 (s):"

#~ msgid ""
#~ "Minimum spacing between adjacent meander segments. The resulting spacing "
#~ "may be greater based on design rules."
#~ msgstr ""
#~ "인접한 미앤더 세그먼트간의 최소 간격입니다. 디자인 규칙에 따라 결과물의 간"
#~ "격은 더 커질 수 있습니다."

#~ msgid "Use net class widths"
#~ msgstr "네트 클래스 너비 사용"

#~ msgid "Use net class sizes"
#~ msgstr "네트 클래스 크기 사용"

#, fuzzy
#~ msgid "When Adding Footprints to PCB"
#~ msgstr "풋프린트 편집기에서 열기"

#, fuzzy
#~ msgid "Apply board defaults to footprint graphics"
#~ msgstr "기본 풋프린트 존재하지 않음"

#~ msgid "Micro via drill out of range"
#~ msgstr "마이크로 비아 드릴 허용 범위 초과"

#, c-format
#~ msgid "rule %s"
#~ msgstr "규칙 %s"

#, c-format
#~ msgid "Width Constraints: min %s"
#~ msgstr "너비 제한: 최소 %s"

#~ msgid "Increase meander spacing by one step."
#~ msgstr "미앤더 간격을 한 단계씩 증가시킵니다."

#~ msgid "Decrease meander spacing by one step."
#~ msgstr "미앤더 간격을 한 단계씩 감소시킵니다."

#~ msgid "Increase meander amplitude by one step."
#~ msgstr "미앤더 진폭을 한 단계씩 증가시킵니다."

#~ msgid "Decrease meander amplitude by one step."
#~ msgstr "미앤더 진폭을 한 단계씩 감소시킵니다."

#~ msgid "Too long: "
#~ msgstr "너무 긺: "

#~ msgid "Too short: "
#~ msgstr "너무 짧음: "

#~ msgid "Tuned: "
#~ msgstr "조정됨: "

#~ msgid "Tuned: skew "
#~ msgstr "조정됨: 스큐 "

#, c-format
#~ msgid "Resolved min connection width constraint: %s."
#~ msgstr "해결된 최소 연결 폭 제약 조건: %s."

#~ msgid "Hole diameter resolution for:"
#~ msgstr "다음을 위한 홀 직경 계산:"

#, c-format
#~ msgid "Resolved clearance: %s."
#~ msgstr "해결된 클리어런스: %s."

#~ msgid "Hole to hole clearance resolution for:"
#~ msgstr "구멍 대 구멍 유격 해상도:"

#~ msgid "Thermal relief gap resolution for:"
#~ msgstr "단열판 갭 분해능:"

#, c-format
#~ msgid "Resolved thermal relief spoke width: %s."
#~ msgstr "해결된 단열판 스포크 너비: %s."

#, c-format
#~ msgid "Resolved min thermal relief spoke count: %d."
#~ msgstr "최소 단열판 스포크 수: %d."

#, fuzzy
#~ msgid "Clearance is 0."
#~ msgstr "클리어런스: %s."

#~ msgid "Diff pair gap resolution for:"
#~ msgstr "차동 쌍 간격 해결:"

#~ msgid "Diff pair max uncoupled length resolution for:"
#~ msgstr "최대 길이를 벗어난 차동 쌍 해결:"

#~ msgid "Simplifying polygons on F_Cu"
#~ msgstr "F_Cu 다각형 단순화"

#~ msgid "Simplifying polygons on B_Cu"
#~ msgstr "B_Cu 다각형 단순화"

#~ msgid "Center pivot rotation"
#~ msgstr "중심 피벗 회전"

#~ msgid "Enable animation"
#~ msgstr "애니메이션 활성화"

#~ msgid "Animation speed:"
#~ msgstr "애니메이션 속도:"

#~ msgid "Symbol Footprint Association Files (.equ)"
#~ msgstr "심볼 풋프린트 관련된 파일 (.equ)"

#~ msgid "Remove"
#~ msgstr "제거"

#~ msgid "Edit File"
#~ msgstr "파일 편집"

#~ msgid "Available environment variables for relative paths:"
#~ msgstr "상대 경로에 사용 가능한 환경 변수들:"

#~ msgid "Relative"
#~ msgstr "상대 경로"

#~ msgid "Path Type"
#~ msgstr "경로 유형"

#~ msgid "Output file name"
#~ msgstr "출력 파일 이름"

#~ msgid "Color theme to use (will default to pcbnew settings)"
#~ msgstr "사용할 색상 테마(기본값은 pcbnew 설정임)"

#~ msgid "Circle Properties"
#~ msgstr "원 속성"

#~ msgid "Arc Properties"
#~ msgstr "호 속성"

#~ msgid "Polygon Properties"
#~ msgstr "다각형 속성"

#~ msgid "Rectangle Properties"
#~ msgstr "사각형 속성"

#~ msgid "Line Segment Properties"
#~ msgstr "도선 세그먼트 속성"

#~ msgid "Curve Properties"
#~ msgstr "곡선 속성"

#~ msgid "Graphic Item Properties"
#~ msgstr "그래픽 항목 속성"

#, fuzzy
#~ msgid ""
#~ "### Top-level Clauses\n"
#~ "\n"
#~ "    (version <number>)\n"
#~ "\n"
#~ "    (rule <rule_name> <rule_clause> ...)\n"
#~ "\n"
#~ "\n"
#~ "<br>\n"
#~ "\n"
#~ "### Rule Clauses\n"
#~ "\n"
#~ "    (constraint <constraint_type> ...)\n"
#~ "\n"
#~ "    (condition \"<expression>\")\n"
#~ "\n"
#~ "    (layer \"<layer_name>\")\n"
#~ "\n"
#~ "    (severity <severity_name>)\n"
#~ "\n"
#~ "\n"
#~ "<br>\n"
#~ "\n"
#~ "### Constraint Types\n"
#~ "\n"
#~ " * annular\\_width\n"
#~ " * assertion\n"
#~ " * clearance\n"
#~ " * connection\\_width\n"
#~ " * courtyard_clearance\n"
#~ " * diff\\_pair\\_gap\n"
#~ " * diff\\_pair\\_uncoupled\n"
#~ " * disallow\n"
#~ " * edge\\_clearance\n"
#~ " * length\n"
#~ " * hole\\_clearance\n"
#~ " * hole\\_size\n"
#~ " * min\\_resolved\\_spokes\n"
#~ " * physical\\_clearance\n"
#~ " * physical\\_hole\\_clearance\n"
#~ " * silk\\_clearance\n"
#~ " * skew\n"
#~ " * text\\_height\n"
#~ " * text\\_thickness\n"
#~ " * thermal\\_relief\\_gap\n"
#~ " * thermal\\_spoke\\_width\n"
#~ " * track\\_width\n"
#~ " * via\\_count\n"
#~ " * via\\_diameter\n"
#~ " * zone\\_connection\n"
#~ "\n"
#~ "Note: `clearance` and `hole_clearance` rules are not run against items of "
#~ "the same net; `physical_clearance` and `physical_hole_clearance` rules "
#~ "are.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "### Items\n"
#~ "\n"
#~ " * `A` &nbsp;&nbsp; _the first (or only) item under test_\n"
#~ " * `B` &nbsp;&nbsp; _the second item under test (for binary tests)_\n"
#~ " * `L` &nbsp;&nbsp; _the layer currently under test_\n"
#~ "\n"
#~ "<br>\n"
#~ "\n"
#~ "### Item Types\n"
#~ "\n"
#~ " * buried\\_via\n"
#~ " * graphic\n"
#~ " * hole\n"
#~ " * micro\\_via\n"
#~ " * pad\n"
#~ " * text\n"
#~ " * track\n"
#~ " * via\n"
#~ " * zone\n"
#~ "\n"
#~ "<br>\n"
#~ "\n"
#~ "### Zone Connections\n"
#~ "\n"
#~ " * solid\n"
#~ " * thermal\\_reliefs\n"
#~ " * none\n"
#~ "\n"
#~ "<br>\n"
#~ "\n"
#~ "### Severity Names\n"
#~ "\n"
#~ " * warning\n"
#~ " * error\n"
#~ " * exclusion\n"
#~ " * ignore\n"
#~ "\n"
#~ "<br>\n"
#~ "\n"
#~ "### Examples\n"
#~ "\n"
#~ "    (version 1)\n"
#~ "\n"
#~ "    (rule HV\n"
#~ "       (constraint clearance (min 1.5mm))\n"
#~ "       (condition \"A.NetClass == 'HV'\"))\n"
#~ "\n"
#~ "\n"
#~ "    (rule HV\n"
#~ "       (layer outer)\n"
#~ "       (constraint clearance (min 1.5mm))\n"
#~ "       (condition \"A.NetClass == 'HV'\"))\n"
#~ "\n"
#~ "\n"
#~ "    (rule HV_HV\n"
#~ "       # wider clearance between HV tracks\n"
#~ "       (constraint clearance (min \"1.5mm + 2.0mm\"))\n"
#~ "       (condition \"A.NetClass == 'HV' && B.NetClass == 'HV'\"))\n"
#~ "\n"
#~ "\n"
#~ "    (rule HV_unshielded\n"
#~ "       (constraint clearance (min 2mm))\n"
#~ "       (condition \"A.NetClass == 'HV' && !A."
#~ "enclosedByArea('Shield*')\"))\n"
#~ "\n"
#~ "\n"
#~ "    (rule heavy_thermals\n"
#~ "       (constraint thermal_spoke_width (min 0.5mm))\n"
#~ "       (condition \"A.NetClass == 'HV'\"))\n"
#~ "<br><br>\n"
#~ "\n"
#~ "### Notes\n"
#~ "\n"
#~ "Version clause must be the first clause.  It indicates the syntax version "
#~ "of the file so that \n"
#~ "future rules parsers can perform automatic updates.  It should be\n"
#~ "set to \"1\".\n"
#~ "\n"
#~ "Rules should be ordered by specificity.  Later rules take\n"
#~ "precedence over earlier rules; once a matching rule is found\n"
#~ "no further rules will be checked.\n"
#~ "\n"
#~ "Use Ctrl+/ to comment or uncomment line(s).\n"
#~ "<br><br><br>\n"
#~ "\n"
#~ "### Expression functions\n"
#~ "\n"
#~ "All function parameters support simple wildcards (`*` and `?`).\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.intersectsCourtyard('<footprint_refdes>')\n"
#~ "True if any part of `A` lies within the given footprint's principal "
#~ "courtyard.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.intersectsFrontCourtyard('<footprint_refdes>')\n"
#~ "True if any part of `A` lies within the given footprint's front "
#~ "courtyard.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.intersectsBackCourtyard('<footprint_refdes>')\n"
#~ "True if any part of `A` lies within the given footprint's back "
#~ "courtyard.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.intersectsArea('<zone_name>')\n"
#~ "True if any part of `A` lies within the given zone's outline.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.enclosedByArea('<zone_name>')\n"
#~ "True if all of `A` lies within the given zone's outline.  \n"
#~ "\n"
#~ "NB: this is potentially a more expensive call than `intersectsArea()`.  "
#~ "Use `intersectsArea()` \n"
#~ "where possible.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.isPlated()\n"
#~ "True if `A` has a hole which is plated.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.inDiffPair('<net_name>')\n"
#~ "True if `A` has a net that is part of the specified differential pair.\n"
#~ "`<net_name>` is the base name of the differential pair.  For example, "
#~ "`inDiffPair('/CLK')`\n"
#~ "matches items in the `/CLK_P` and `/CLK_N` nets.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    AB.isCoupledDiffPair()\n"
#~ "True if `A` and `B` are members of the same diff pair.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.memberOfGroup('<group_name>')\n"
#~ "True if `A` is a member of the given group. The name can contain "
#~ "wildcards.\n"
#~ "Includes nested membership.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.memberOfFootprint('<footprint_reference>')\n"
#~ "True if `A` is a member of a footprint matching the given reference "
#~ "designator.  The\n"
#~ "reference can contain wildcards.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.existsOnLayer('<layer_name>')\n"
#~ "True if `A` exists on the given layer.  The layer name can be\n"
#~ "either the name assigned in Board Setup > Board Editor Layers or\n"
#~ "the canonical name (ie: `F.Cu`).\n"
#~ "\n"
#~ "NB: this returns true if `A` is on the given layer, independently\n"
#~ "of whether or not the rule is being evaluated for that layer.\n"
#~ "For the latter use a `(layer \"layer_name\")` clause in the rule.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    !!! A.memberOf('<group_name>') !!!\n"
#~ "Deprecated; use `memberOfGroup()` instead.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    !!! A.insideCourtyard('<footprint_refdes>') !!!\n"
#~ "Deprecated; use `intersectsCourtyard()` instead.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    !!! A.insideFrontCourtyard('<footprint_refdes>') !!!\n"
#~ "Deprecated; use `intersectsFrontCourtyard()` instead.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    !!! A.insideBackCourtyard('<footprint_refdes>') !!!\n"
#~ "Deprecated; use `intersectsBackCourtyard()` instead.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    !!! A.insideArea('<zone_name>') !!!\n"
#~ "Deprecated; use `intersectsArea()` instead.\n"
#~ "<br><br><br>\n"
#~ "\n"
#~ "### More Examples\n"
#~ "\n"
#~ "    (rule \"copper keepout\"\n"
#~ "       (constraint disallow track via zone)\n"
#~ "       (condition \"A.intersectsArea('zone3')\"))\n"
#~ "\n"
#~ "\n"
#~ "    (rule \"BGA neckdown\"\n"
#~ "       (constraint track_width (min 0.2mm) (opt 0.25mm))\n"
#~ "       (constraint clearance (min 0.05mm) (opt 0.08mm))\n"
#~ "       (condition \"A.intersectsCourtyard('U3')\"))\n"
#~ "\n"
#~ "\n"
#~ "    # prevent silk over tented vias\n"
#~ "    (rule silk_over_via\n"
#~ "       (constraint silk_clearance (min 0.2mm))\n"
#~ "       (condition \"A.Type == '*Text' && B.Type == 'Via'\"))\n"
#~ "\n"
#~ "\n"
#~ "    (rule \"Distance between Vias of Different Nets\"\n"
#~ "        (constraint hole_to_hole (min 0.254mm))\n"
#~ "        (condition \"A.Type == 'Via' && B.Type == 'Via' && A.Net != B."
#~ "Net\"))\n"
#~ "\n"
#~ "    (rule \"Clearance between Pads of Different Nets\"\n"
#~ "        (constraint clearance (min 3.0mm))\n"
#~ "        (condition \"A.Type == 'Pad' && B.Type == 'Pad' && A.Net != B."
#~ "Net\"))\n"
#~ "\n"
#~ "\n"
#~ "    (rule \"Via Hole to Track Clearance\"\n"
#~ "        (constraint hole_clearance (min 0.254mm))\n"
#~ "        (condition \"A.Type == 'Via' && B.Type == 'Track'\"))\n"
#~ "\n"
#~ "    (rule \"Pad to Track Clearance\"\n"
#~ "        (constraint clearance (min 0.2mm))\n"
#~ "        (condition \"A.Type == 'Pad' && B.Type == 'Track'\"))\n"
#~ "\n"
#~ "\n"
#~ "    (rule \"clearance-to-1mm-cutout\"\n"
#~ "        (constraint clearance (min 0.8mm))\n"
#~ "        (condition \"A.Layer == 'Edge.Cuts' && A.Thickness == 1.0mm\"))\n"
#~ "\n"
#~ "\n"
#~ "    (rule \"Max Drill Hole Size Mechanical\"\n"
#~ "        (constraint hole_size (max 6.3mm))\n"
#~ "        (condition \"A.Pad_Type == 'NPTH, mechanical'\"))\n"
#~ "\n"
#~ "    (rule \"Max Drill Hole Size PTH\"\n"
#~ "        (constraint hole_size (max 6.35mm))\n"
#~ "        (condition \"A.Pad_Type == 'Through-hole'\"))\n"
#~ "\n"
#~ "\n"
#~ "    # Specify an optimal gap for a particular diff-pair\n"
#~ "    (rule \"dp clock gap\"\n"
#~ "        (constraint diff_pair_gap (opt \"0.8mm\"))\n"
#~ "        (condition \"A.inDiffPair('/CLK')\"))\n"
#~ "\n"
#~ "    # Specify a larger clearance around any diff-pair\n"
#~ "    (rule \"dp clearance\"\n"
#~ "        (constraint clearance (min \"1.5mm\"))\n"
#~ "        (condition \"A.inDiffPair('*') && !AB.isCoupledDiffPair()\"))\n"
#~ "\n"
#~ "\n"
#~ "    # Don't use thermal reliefs on heatsink pads\n"
#~ "    (rule heat_sink_pad\n"
#~ "        (constraint zone_connection solid)\n"
#~ "        (condition \"A.Fabrication_Property == 'Heatsink pad'\"))\n"
#~ "\n"
#~ "    # Require all four thermal relief spokes to connect to parent zone\n"
#~ "    (rule fully_spoked_pads\n"
#~ "        (constraint min_resolved_spokes 4))\n"
#~ "\n"
#~ "    # Set thermal relief gap & spoke width for all zones\n"
#~ "    (rule defined_relief\n"
#~ "        (constraint thermal_relief_gap (min 10mil))\n"
#~ "        (constraint thermal_spoke_width (min 12mil)))\n"
#~ "\n"
#~ "    # Override thermal relief gap & spoke width for GND and PWR zones\n"
#~ "    (rule defined_relief_pwr\n"
#~ "        (constraint thermal_relief_gap (min 10mil))\n"
#~ "        (constraint thermal_spoke_width (min 12mil))\n"
#~ "        (condition \"A.Name == 'zone_GND' || A.Name == 'zone_PWR'\"))\n"
#~ "\n"
#~ "\n"
#~ "    # Prevent solder wicking from SMD pads\n"
#~ "    (rule holes_in_pads\n"
#~ "        (constraint physical_hole_clearance (min 0.2mm))\n"
#~ "        (condition \"B.Pad_Type == 'SMD'\"))\n"
#~ "\n"
#~ "    # Disallow solder mask margin overrides\n"
#~ "    (rule \"disallow solder mask margin overrides\"\n"
#~ "        (constraint assertion \"A.Soldermask_Margin_Override == 0mm\")\n"
#~ "        (condition \"A.Type == 'Pad'\"))\n"
#~ "\n"
#~ "\n"
#~ "    # Enforce a mechanical clearance between components and board edge\n"
#~ "    (rule front_mechanical_board_edge_clearance\n"
#~ "        (layer \"F.Courtyard\")\n"
#~ "        (constraint physical_clearance (min 3mm))\n"
#~ "        (condition \"B.Layer == 'Edge.Cuts'\"))\n"
#~ "\n"
#~ "\n"
#~ "    # Check current-carrying capacity\n"
#~ "    (rule high-current\n"
#~ "        (constraint track_width (min 1.0mm))\n"
#~ "        (constraint connection_width (min 0.8mm))\n"
#~ "        (condition \"A.NetClass == 'Power'\"))\n"
#~ "\n"
#~ "### Documentation\n"
#~ "\n"
#~ "For the full documentation see [https://docs.kicad.org](https://docs."
#~ "kicad.org/GetMajorMinorVersion/en/pcbnew/pcbnew.html#custom_design_rules)."
#~ msgstr ""
#~ "### 최상위 조항\n"
#~ "\n"
#~ "    (version <number>)\n"
#~ "\n"
#~ "    (rule <rule_name> <rule_clause> ...)\n"
#~ "\n"
#~ "\n"
#~ "<br>\n"
#~ "\n"
#~ "### Rule 규칙 조항\n"
#~ "\n"
#~ "    (constraint <constraint_type> ...)\n"
#~ "\n"
#~ "    (condition \"<expression>\")\n"
#~ "\n"
#~ "    (layer \"<layer_name>\")\n"
#~ "\n"
#~ "    (severity <severity_name>)\n"
#~ "\n"
#~ "\n"
#~ "<br>\n"
#~ "\n"
#~ "### 제약 유형\n"
#~ "\n"
#~ " * annular\\_width\n"
#~ " * assertion\n"
#~ " * clearance\n"
#~ " * connection\\_width\n"
#~ " * courtyard_clearance\n"
#~ " * diff\\_pair\\_gap\n"
#~ " * diff\\_pair\\_uncoupled\n"
#~ " * disallow\n"
#~ " * edge\\_clearance\n"
#~ " * length\n"
#~ " * hole\\_clearance\n"
#~ " * hole\\_size\n"
#~ " * min\\_resolved\\_spokes\n"
#~ " * physical\\_clearance\n"
#~ " * physical\\_hole\\_clearance\n"
#~ " * silk\\_clearance\n"
#~ " * skew\n"
#~ " * text\\_height\n"
#~ " * text\\_thickness\n"
#~ " * thermal\\_relief\\_gap\n"
#~ " * thermal\\_spoke\\_width\n"
#~ " * track\\_width\n"
#~ " * via\\_count\n"
#~ " * via\\_diameter\n"
#~ " * zone\\_connection\n"
#~ "\n"
#~ "참고: 'clearance' 및 'hole_clearance' 규칙은 동일한 네트의 항목에 대해 실"
#~ "행되지 않습니다. `physical_clearance` 및 `physical_hole_clearance` 규칙이 "
#~ "있습니다.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "### 항목\n"
#~ "\n"
#~ " * `A` &nbsp;&nbsp; _the first (or only) item under test_\n"
#~ " * `B` &nbsp;&nbsp; _the second item under test (for binary tests)_\n"
#~ " * `L` &nbsp;&nbsp; _the layer currently under test_\n"
#~ "\n"
#~ "<br>\n"
#~ "\n"
#~ "### 항목 유형\n"
#~ "\n"
#~ " * buried\\_via\n"
#~ " * graphic\n"
#~ " * hole\n"
#~ " * micro\\_via\n"
#~ " * pad\n"
#~ " * text\n"
#~ " * track\n"
#~ " * via\n"
#~ " * zone\n"
#~ "\n"
#~ "<br>\n"
#~ "\n"
#~ "### 영역 연결\n"
#~ "\n"
#~ " * solid\n"
#~ " * thermal\\_reliefs\n"
#~ " * none\n"
#~ "\n"
#~ "<br>\n"
#~ "\n"
#~ "### 심각도 이름\n"
#~ "\n"
#~ " * warning\n"
#~ " * error\n"
#~ " * exclusion\n"
#~ " * ignore\n"
#~ "\n"
#~ "<br>\n"
#~ "\n"
#~ "### 규칙 예\n"
#~ "\n"
#~ "    (version 1)\n"
#~ "\n"
#~ "    (rule HV\n"
#~ "       (constraint clearance (min 1.5mm))\n"
#~ "       (condition \"A.NetClass == 'HV'\"))\n"
#~ "\n"
#~ "\n"
#~ "    (rule HV\n"
#~ "       (layer outer)\n"
#~ "       (constraint clearance (min 1.5mm))\n"
#~ "       (condition \"A.NetClass == 'HV'\"))\n"
#~ "\n"
#~ "\n"
#~ "    (rule HV_HV\n"
#~ "       # wider clearance between HV tracks\n"
#~ "       (constraint clearance (min \"1.5mm + 2.0mm\"))\n"
#~ "       (condition \"A.NetClass == 'HV' && B.NetClass == 'HV'\"))\n"
#~ "\n"
#~ "\n"
#~ "    (rule HV_unshielded\n"
#~ "       (constraint clearance (min 2mm))\n"
#~ "       (condition \"A.NetClass == 'HV' && !A."
#~ "enclosedByArea('Shield*')\"))\n"
#~ "\n"
#~ "\n"
#~ "    (rule heavy_thermals\n"
#~ "       (constraint thermal_spoke_width (min 0.5mm))\n"
#~ "       (condition \"A.NetClass == 'HV'\"))\n"
#~ "<br><br>\n"
#~ "\n"
#~ "### 메모\n"
#~ "\n"
#~ "버전 절은 첫 번째 절이어야 합니다. \n"
#~ "향후 규칙 구문 분석기가 자동 업데이트를 수행할 수 있도록 파일의 구문 버전"
#~ "을 나타냅니다. \n"
#~ "\"1\"로 설정해야 합니다.\n"
#~ "\n"
#~ "규칙은 특이성에 따라 정렬되어야 합니다. \n"
#~ "최신 규칙이 이전 규칙보다 우선합니다. \n"
#~ "일치하는 규칙이 발견되면 더 이상 규칙을 확인하지 않습니다.\n"
#~ "\n"
#~ "행에 주석을 달거나 주석을 제거하려면 Ctrl+/를 사용하십시오.\n"
#~ "<br><br><br>\n"
#~ "\n"
#~ "### 표현식 함수\n"
#~ "\n"
#~ "모든 함수 매개변수는 단순 와일드카드(`*` 와 `?`)를 지원합니다.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.intersectsCourtyard('<footprint_refdes>')\n"
#~ "'A'의 일부가 주어진 풋프린트의 주요 코트야드 내에 있는 경우 참입니다.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.intersectsFrontCourtyard('<footprint_refdes>')\n"
#~ "'A'의 일부가 주어진 풋프린트의 앞마당자리에 있으면 참입니다.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.intersectsBackCourtyard('<footprint_refdes>')\n"
#~ "'A'의 일부가 주어진 풋프린트의 뒷마당자리에 있으면 참입니다.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.intersectsArea('<zone_name>')\n"
#~ "'A'의 일부가 지정된 영역의 윤곽선 내에 있으면 참입니다.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.enclosedByArea('<zone_name>')\n"
#~ "모든 `A`가 지정된 영역의 윤곽선 내에 있으면 참입니다.  \n"
#~ "\n"
#~ "NB: 이것은 잠재적으로 `intersectsArea()`보다 비용이 더 많이 드는 호출입니"
#~ "다.  \n"
#~ "가능한 경우 `intersectsArea()`를 사용하십시오.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.isPlated()\n"
#~ "'A'에 도금된 구멍이 있으면 참입니다.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.inDiffPair('<net_name>')\n"
#~ "'A'에 지정된 차등 쌍의 일부인 네트가 있는 경우 참입니다.\n"
#~ "`<net_name>`은 차등 쌍의 기본 이름입니다. 예: `inDiffPair('/CLK')`\n"
#~ "`/CLK_P` 및 `/CLK_N` 네트의 항목과 일치합니다.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    AB.isCoupledDiffPair()\n"
#~ "'A'와 'B'가 동일한 차동 쌍의 구성원이면 참입니다.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.memberOf('<group_name>')\n"
#~ "'A'가 주어진 그룹의 구성원이면 참입니다. 중첩된 구성원을 포함합니다.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    A.existsOnLayer('<layer_name>')\n"
#~ "True if `A` exists on the given layer.  The layer name can be\n"
#~ "either the name assigned in Board Setup > Board Editor Layers or\n"
#~ "the canonical name (ie: `F.Cu`).\n"
#~ "\n"
#~ "NB: this returns true if `A` is on the given layer, independently\n"
#~ "of whether or not the rule is being evaluated for that layer.\n"
#~ "For the latter use a `(layer \"layer_name\")` clause in the rule.\n"
#~ "주어진 레이어에 'A'가 존재하면 참입니다. \n"
#~ "레이어 이름은 Board Setup > Board Editor Layers에서 할당된 이름이거나 \n"
#~ "정식 이름(예: 'F.Cu')일 수 있습니다.\n"
#~ "\n"
#~ "NB: 규칙이 해당 레이어에 대해 평가되고 있는지 여부와 관계없이 \n"
#~ "'A'가 주어진 레이어에 있으면 true를 반환합니다.\n"
#~ "후자의 경우 규칙에서 `(layer \"layer_name\")` 절을 사용합니다.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    !!! A.insideCourtyard('<footprint_refdes>') !!!\n"
#~ "더 이상 사용되지 않음. 대신 `intersectsCourtyard()`를 사용하세요.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    !!! A.insideFrontCourtyard('<footprint_refdes>') !!!\n"
#~ "더 이상 사용되지 않음. 대신 `intersectsFrontCourtyard()`를 사용하세요.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    !!! A.insideBackCourtyard('<footprint_refdes>') !!!\n"
#~ "Deprecated; use `intersectsBackCourtyard()` instead.\n"
#~ "<br><br>\n"
#~ "\n"
#~ "    !!! A.insideArea('<zone_name>') !!!\n"
#~ "더 이상 사용되지 않음. 대신 `intersectsArea()`를 사용하세요.\n"
#~ "<br><br><br>\n"
#~ "\n"
#~ "### 추가 규칙 예\n"
#~ "\n"
#~ "    (rule \"copper keepout\"\n"
#~ "       (constraint disallow track via zone)\n"
#~ "       (condition \"A.intersectsArea('zone3')\"))\n"
#~ "\n"
#~ "\n"
#~ "    (rule \"BGA neckdown\"\n"
#~ "       (constraint track_width (min 0.2mm) (opt 0.25mm))\n"
#~ "       (constraint clearance (min 0.05mm) (opt 0.08mm))\n"
#~ "       (condition \"A.intersectsCourtyard('U3')\"))\n"
#~ "\n"
#~ "\n"
#~ "    # prevent silk over tented vias\n"
#~ "    (rule silk_over_via\n"
#~ "       (constraint silk_clearance (min 0.2mm))\n"
#~ "       (condition \"A.Type == '*Text' && B.Type == 'Via'\"))\n"
#~ "\n"
#~ "\n"
#~ "    (rule \"Distance between Vias of Different Nets\"\n"
#~ "        (constraint hole_to_hole (min 0.254mm))\n"
#~ "        (condition \"A.Type == 'Via' && B.Type == 'Via' && A.Net != B."
#~ "Net\"))\n"
#~ "\n"
#~ "    (rule \"Clearance between Pads of Different Nets\"\n"
#~ "        (constraint clearance (min 3.0mm))\n"
#~ "        (condition \"A.Type == 'Pad' && B.Type == 'Pad' && A.Net != B."
#~ "Net\"))\n"
#~ "\n"
#~ "\n"
#~ "    (rule \"Via Hole to Track Clearance\"\n"
#~ "        (constraint hole_clearance (min 0.254mm))\n"
#~ "        (condition \"A.Type == 'Via' && B.Type == 'Track'\"))\n"
#~ "\n"
#~ "    (rule \"Pad to Track Clearance\"\n"
#~ "        (constraint clearance (min 0.2mm))\n"
#~ "        (condition \"A.Type == 'Pad' && B.Type == 'Track'\"))\n"
#~ "\n"
#~ "\n"
#~ "    (rule \"clearance-to-1mm-cutout\"\n"
#~ "        (constraint clearance (min 0.8mm))\n"
#~ "        (condition \"A.Layer == 'Edge.Cuts' && A.Thickness == 1.0mm\"))\n"
#~ "\n"
#~ "\n"
#~ "    (rule \"Max Drill Hole Size Mechanical\"\n"
#~ "        (constraint hole_size (max 6.3mm))\n"
#~ "        (condition \"A.Pad_Type == 'NPTH, mechanical'\"))\n"
#~ "\n"
#~ "    (rule \"Max Drill Hole Size PTH\"\n"
#~ "        (constraint hole_size (max 6.35mm))\n"
#~ "        (condition \"A.Pad_Type == 'Through-hole'\"))\n"
#~ "\n"
#~ "\n"
#~ "    # 특정 차동 쌍에 대한 최적의 간격을 지정합니다.\n"
#~ "    (rule \"dp clock gap\"\n"
#~ "        (constraint diff_pair_gap (opt \"0.8mm\"))\n"
#~ "        (condition \"A.inDiffPair('/CLK')\"))\n"
#~ "\n"
#~ "    # 차동 쌍 주변에 더 큰 간격을 지정하십시오.\n"
#~ "    (rule \"dp clearance\"\n"
#~ "        (constraint clearance (min \"1.5mm\"))\n"
#~ "        (condition \"A.inDiffPair('*') && !AB.isCoupledDiffPair()\"))\n"
#~ "\n"
#~ "\n"
#~ "    # 방열판 패드에 방열 릴리프를 사용하지 마십시오.\n"
#~ "    (rule heat_sink_pad\n"
#~ "        (constraint zone_connection solid)\n"
#~ "        (condition \"A.Fabrication_Property == 'Heatsink pad'\"))\n"
#~ "\n"
#~ "    # 상위 영역에 연결하려면 4개의 열 완화 스포크가 모두 필요합니다.\n"
#~ "    (rule fully_spoked_pads\n"
#~ "        (constraint min_resolved_spokes 4))\n"
#~ "\n"
#~ "    # 모든 영역에 대한 열 완화 간격 및 스포크 너비 설정\n"
#~ "    (rule defined_relief\n"
#~ "        (constraint thermal_relief_gap (min 10mil))\n"
#~ "        (constraint thermal_spoke_width (min 12mil)))\n"
#~ "\n"
#~ "    # GND 및 PWR 영역에 대한 열 완화 간격 및 스포크 폭 재정의\n"
#~ "    (rule defined_relief_pwr\n"
#~ "        (constraint thermal_relief_gap (min 10mil))\n"
#~ "        (constraint thermal_spoke_width (min 12mil))\n"
#~ "        (condition \"A.Name == 'zone_GND' || A.Name == 'zone_PWR'\"))\n"
#~ "\n"
#~ "\n"
#~ "    # SMD 패드에서 솔더 위킹 방지\n"
#~ "    (rule holes_in_pads\n"
#~ "        (constraint physical_hole_clearance (min 0.2mm))\n"
#~ "        (condition \"B.Pad_Type == 'SMD'\"))\n"
#~ "\n"
#~ "    # 솔더 마스크 마진 오버라이드를 허용하지 않음\n"
#~ "    (rule \"disallow solder mask margin overrides\"\n"
#~ "        (constraint assertion \"A.Soldermask_Margin_Override == 0mm\")\n"
#~ "        (condition \"A.Type == 'Pad'\"))\n"
#~ "\n"
#~ "\n"
#~ "    # 콤포넌트와 보드 가장자리 사이의 기계적 여유 공간을 적용합니다.\n"
#~ "    (rule front_mechanical_board_edge_clearance\n"
#~ "        (layer \"F.Courtyard\")\n"
#~ "        (constraint physical_clearance (min 3mm))\n"
#~ "        (condition \"B.Layer == 'Edge.Cuts'\"))\n"
#~ "\n"
#~ "\n"
#~ "    # 통전용량 확인\n"
#~ "    (rule high-current\n"
#~ "        (constraint track_width (min 1.0mm))\n"
#~ "        (constraint connection_width (min 0.8mm))\n"
#~ "        (condition \"A.NetClass == 'Power'\"))"

#, c-format
#~ msgid "Choose Footprint (%d items loaded)"
#~ msgstr "풋프린트 선택 (%d개의 항목 불러옴)"

#, c-format
#~ msgid ""
#~ "Save and restore view orientation and zoom.\n"
#~ "Use %s+Tab to activate selector.\n"
#~ "Successive Tabs while holding %s down will cycle through viewports in the "
#~ "popup."
#~ msgstr ""
#~ "뷰 방향과 확대/축소를 저장하고 복원합니다.\n"
#~ "%s+Tab을 사용하여 선택기를 활성화합니다.\n"
#~ "%s를 누른 상태에서 연속 탭하면 팝업의 뷰포트를 순환합니다."

#~ msgid "Toggle SMD 3D models"
#~ msgstr "SMD 3D 모델로 전환"

#~ msgid "Toggle realistic mode"
#~ msgstr "현실적 모드 전환"

#~ msgid "Toggle board body display"
#~ msgstr "기판 본체 표시 전환"

#~ msgid "Toggle zone display"
#~ msgstr "구역 표시 전환"

#~ msgid "Toggle adhesive display"
#~ msgstr "접착면 디스플레이 전환"

#~ msgid "Toggle display of adhesive layers"
#~ msgstr "접착 레이어 표시 전환"

#~ msgid "Toggle silkscreen display"
#~ msgstr "실크스크린 디스플레이 전환"

#~ msgid "Toggle display of silkscreen layers"
#~ msgstr "실크 스크린 레이어 표시 전환"

#~ msgid "Toggle solder mask display"
#~ msgstr "솔더 마스크 표시 전환"

#~ msgid "Toggle display of solder mask layers"
#~ msgstr "솔더 마스크 레이어 표시 전환"

#~ msgid "Toggle solder paste display"
#~ msgstr "솔더 페이스트 표시 전환"

#~ msgid "Toggle display of solder paste layers"
#~ msgstr "솔더 페이스트 레이어 표시 전환"

#~ msgid "Toggle comments display"
#~ msgstr "설명 표시 전환"

#~ msgid "Toggle display of comments and drawings layers"
#~ msgstr "주석 및 도면 레이어 표시 전환"

#~ msgid "Toggle ECO display"
#~ msgstr "ECO 디스플레이 전환"

#~ msgid "Toggle display of ECO layers"
#~ msgstr "ECO 레이어 표시 전환"

#~ msgid "Environment Colors"
#~ msgstr "환경 색상"

#~ msgid "Board Colors"
#~ msgstr "기판 색상"

#~ msgid "Use board stackup colors"
#~ msgstr "기판 스택업 색상 사용"

#~ msgid "Silkscreen top:"
#~ msgstr "실크 스크린 상단:"

#~ msgid "Silkscreen bottom:"
#~ msgstr "실크 스크린 하단:"

#~ msgid "Solder mask top:"
#~ msgstr "솔더 마스크 상단:"

#~ msgid "Solder mask bottom:"
#~ msgstr "솔더 마스크 하단:"

#~ msgid "Copper/surface finish:"
#~ msgstr "구리/표면 마감:"

#~ msgid "Board Layers"
#~ msgstr "보드 레이어"

#~ msgid "User Layers (not shown in realistic mode)"
#~ msgstr "사용자 레이어(실제 모드에는 표시되지 않음)"

#~ msgid "Realistic mode"
#~ msgstr "현실적인 모드"

#~ msgid "Current Grid"
#~ msgstr "전류 그리드"

#~ msgid "User Defined Grid"
#~ msgstr "사용자 정의 그리드"

#~ msgid "Size X:"
#~ msgstr "크기 X:"

#~ msgid "Size Y:"
#~ msgstr "크기 Y:"

#~ msgid "Reset Grid Sizes"
#~ msgstr "그리드 크기 재설정"

#~ msgid "Resets the list of grid sizes to default values"
#~ msgstr "그리드 크기 목록을 기본 값으로 재설정합니다"

#~ msgid "Grid Properties..."
#~ msgstr "그리드 속성..."

#, c-format
#~ msgid "User grid: %s (%s)"
#~ msgstr "사용자 그리드: %s (%s)"

#~ msgid "Grid Style"
#~ msgstr "그리드 스타일"

#~ msgid "px"
#~ msgstr "px"

#~ msgid "Cursor Shape"
#~ msgstr "커서 모양"

#~ msgid "Cursor shape for drawing, placement and movement tools"
#~ msgstr "그리기, 배치 및 이동 도구에 대한 커서 모양 설정"

#~ msgid "KiCad drawing symbol files"
#~ msgstr "KiCad 도형 심볼 파일"

#~ msgid "All KiCad symbol library files"
#~ msgstr "모든 KiCad 심볼 라이브러리 파일"

#~ msgid "Geda PCB footprint library files"
#~ msgstr "Geda PCB 풋프린트 라이브러리 파일"

#~ msgid "Drawing Properties"
#~ msgstr "그리기 속성"

#, fuzzy
#~ msgid "Off"
#~ msgstr "오프셋"

#~ msgid "Alternate Pin Assignments"
#~ msgstr "대체 핀 할당"

#, c-format
#~ msgid "Unexpected file extension: '%s'."
#~ msgstr "예기치 않은 파일 확장자: '%s'."

#, c-format
#~ msgid "Unsupported ellipse was not imported at (X = %d; Y = %d)."
#~ msgstr "지원되지 않는 타원은 (X = %d; Y = %d)에서 가져오지 못했습니다."

#, c-format
#~ msgid "Deriving from '%s', the root symbol of '%s'."
#~ msgstr "'%s'에서 파생된, '%s'의 루트 심볼."

#~ msgid "This new symbol has no name and cannot be created."
#~ msgstr "새로운 심볼은 이름이 없기 때문에 생성될 수 없습니다."

#~ msgid "No library specified.  Symbol could not be saved."
#~ msgstr "지정된 라이브러리가 없습니다.  심볼을 저장할 수 없습니다."

#, c-format
#~ msgid "Symbol '%s' already exists in library '%s'"
#~ msgstr "심볼 '%s'은(는) 이미 라이브러리 '%s'에 존재합니다"

#~ msgid "Symbol name cannot be empty."
#~ msgstr "심볼 이름은 비워둘 수 없습니다."

#~ msgid ""
#~ "Creating a project will enable features such as text variables, net "
#~ "classes, and ERC exclusions"
#~ msgstr ""
#~ "새로운 프로젝트를 생성함으로써 문자열 변수, 네트 클래스와 ERC 제외와 같은 "
#~ "기능들이 활성화됩니다"

#~ msgid "Do not perform any additional operations after saving library."
#~ msgstr "라이브러리를 저장한 후 추가적인 작업을 수행하지 않습니다."

#~ msgid ""
#~ "Update symbol library table entry to point to new library.\n"
#~ "\n"
#~ "The original library will no longer be available for use."
#~ msgstr ""
#~ "새로운 라이브러리로 심볼 라이브러리 테이블 항목을 업데이트합니다.\n"
#~ "\n"
#~ "기존 라이브러리는 더이상 사용할 수 없게 됩니다."

#~ msgid ""
#~ "Add new entry to the global symbol library table.\n"
#~ "\n"
#~ "The symbol library table nickname is suffixed with\n"
#~ "an integer to prevent duplicate table entries."
#~ msgstr ""
#~ "전역 심볼 라이브러리 테이블에 새로운 항목을 추가합니다.\n"
#~ "\n"
#~ "심볼 라이브러리 테이블 별칭에는 접미사로 정수가 붙으며,\n"
#~ "이는 테이블 항목들이 겹치지 않도록 합니다."

#~ msgid ""
#~ "Add new entry to the project symbol library table.\n"
#~ "\n"
#~ "The symbol library table nickname is suffixed with\n"
#~ "an integer to prevent duplicate table entries."
#~ msgstr ""
#~ "프로젝트 심볼 라이브러리 테이블에 새로운 항목을 추가합니다.\n"
#~ "\n"
#~ "심볼 라이브러리 테이블 별칭에는 접미사로 정수가 붙으며,\n"
#~ "이는 테이블 항목들이 겹치지 않도록 합니다."

#~ msgid "Plot only the first page (no sub-sheets)"
#~ msgstr "첫 페이지만 플롯(하위 시트 없음)"

#~ msgid "Footprint path does not exist or is not accessible\n"
#~ msgstr "풋프린트 경로가 없거나 액세스할 수 없습니다.\n"

#~ msgid "Horizontal center:"
#~ msgstr "수평 중심:"

#~ msgid "Vertical center:"
#~ msgstr "수직 중심:"

#~ msgid "Center Point:"
#~ msgstr "중심점:"

#~ msgid "Ring"
#~ msgstr "링"

#~ msgid "Line width may not be 0 for unfilled shapes."
#~ msgstr "채워지지 않은 도형의 경우, 선의 굵기는 0이 될 수 없습니다."

#, c-format
#~ msgid "Corner %d"
#~ msgstr "모서리 %d"

#~ msgid "Polygon must have at least 3 corners"
#~ msgstr "다각형은 최소 3개 이상의 모서리가 있어야 합니다"

#~ msgid "Polygon must have at least 3 corners after simplification"
#~ msgstr "다각형은 단순화된 이후에도 3개 이상의 모서리가 있어야 합니다"

#~ msgid "Polygon can not be self-intersecting"
#~ msgstr "다각형은 자체 교차할 수 없습니다"

#~ msgid "Note: redundant corners removed"
#~ msgstr "참고: 중복된 모서리 제거됨"

#~ msgid "Select a corner to add the new corner after."
#~ msgstr "다음에 새 모서리를 추가할 모서리를 선택하세요."

#~ msgid "Select a corner to delete."
#~ msgstr "삭제할 모서리를 선택하세요."

#~ msgid "Start point"
#~ msgstr "시작점"

#~ msgid "Control point 1"
#~ msgstr "재어점 1"

#~ msgid "Control point 2"
#~ msgstr "제어점 2"

#~ msgid "End point"
#~ msgstr "종점"

#~ msgid "Move vector"
#~ msgstr "벡터 이동"

#~ msgid "Scaling factor:"
#~ msgstr "배율:"

#~ msgid "Duplicate:"
#~ msgstr "복제:"

#~ msgid "Coordinates are relative to anchor pad, rotated 0.0 deg."
#~ msgstr "좌표는 앵커 패드의 상대값이어야 하며, 0.0도 회전됩니다."

#~ msgid "Pad Custom Shape Geometry Transform"
#~ msgstr "패드 사용자 정의 형상 지오메트리 변환"

#~ msgid "Basic Shape Polygon"
#~ msgstr "다각형 기본 모양"

#~ msgid "width"
#~ msgstr "폭"

#~ msgid "from"
#~ msgstr "시작"

#~ msgid "to"
#~ msgstr "to"

#~ msgid "center"
#~ msgstr "중심"

#~ msgid "start"
#~ msgstr "시작"

#~ msgid "angle"
#~ msgstr "각도"

#~ msgid "at"
#~ msgstr "에"

#~ msgid "radius"
#~ msgstr "반경"

#, c-format
#~ msgid "corners count %d"
#~ msgstr "모서리 수 %d"

#~ msgid "Number box"
#~ msgstr "번호 상자"

#~ msgid "Unknown primitive"
#~ msgstr "근원을 알 수 없음"

#~ msgid "No shape selected"
#~ msgstr "선택한 모양이 없음"

#~ msgid "Ring/Circle"
#~ msgstr "링/원형"

#~ msgid "Shape type:"
#~ msgstr "모양 유형:"

#~ msgid "Primitives list:"
#~ msgstr "기본 요소 리스트:"

#~ msgid "Note: coordinates are relative to anchor pad, orientation 0."
#~ msgstr "참고: 좌표는 앵커 패드의 상대값이어야 하며, 방향 0입니다."

#~ msgid "Edit Primitive"
#~ msgstr "기본 요소 편집"

#~ msgid "Transform Primitive"
#~ msgstr "기본 요소 변환"

#~ msgid "Delete Primitive"
#~ msgstr "기본 요소 삭제"

#~ msgid "Custom Shape Primitives"
#~ msgstr "사용자 정의 형상 기본 요소"

#~ msgid "Net Names"
#~ msgstr "네트 이름"

#~ msgid "Show or hide net names on pads and/or tracks."
#~ msgstr "패드와 (또는) 배선의 네트 이름을 표시하거나 숨깁니다."

#~ msgid "Track && Via Clearances"
#~ msgstr "배선과 비아 클리어런스"

#~ msgid ""
#~ "Show clearance outlines around tracks, and optionally the via clearance "
#~ "around the end of the track while routing."
#~ msgstr ""
#~ "트랙 주변에 클리어런스 아웃라인을 표시하고 선택적으로 라우팅하는 동안 트"
#~ "랙 끝 주위에 비아 클리어런스를 표시합니다."

#~ msgid "The following directories could not be opened: \n"
#~ msgstr "다음 폴더는 열 수 없습니다: \n"

#~ msgid "Failed to open directories to look for libraries"
#~ msgstr "라이브러리를 찾기 위한 디렉토리를 열기 실패"

#~ msgid "No library specified.  Footprint could not be saved."
#~ msgstr "특정된 라이브러리가 없습니다.  풋프린트는 저장될 수 없습니다."

#~ msgid "No footprint name specified.  Footprint could not be saved."
#~ msgstr ""
#~ "풋프린트 이름이 특정되지 않았습니다.  풋프린트는 저장될 수 없습니다."

#~ msgid "No footprint name defined."
#~ msgstr "정의된 풋프린트 이름이 없습니다."

#, c-format
#~ msgid ""
#~ "The current configuration does not include library '%s'.  Use Manage "
#~ "Footprint Libraries to edit the configuration."
#~ msgstr ""
#~ "현재 설정은 '%s' 라이브러리를 포함하지 않습니다.  풋프린트 라이브러리 관리"
#~ "를 사용하여 설정을 편집하세요."

#~ msgid "Footprint library not found."
#~ msgstr "풋프린트 라이브러리를 찾을 수 없습니다."

#, c-format
#~ msgid ""
#~ "Library '%s' is not enabled in the current configuration.  Use Manage "
#~ "Footprint Libraries to edit the configuration."
#~ msgstr ""
#~ "라이브러리 '%s'은(는) 현재 설정에서 활성화되어 있지 않습니다.  풋프린트 라"
#~ "이브러리 관리를 사용하여 설정을 편집합니다."

#~ msgid "Footprint name cannot be empty."
#~ msgstr "Footprint 이름은 비어있을 수 없습니다."

#~ msgid ""
#~ "Creating a project will enable features such as design rules, net "
#~ "classes, and layer presets"
#~ msgstr ""
#~ "새로운 프로젝트를 생성함으로써 디자인 규칙, 네트 클래스와 레이어 프리셋 등"
#~ "의 기능을 사용할 수 있습니다"

#, fuzzy
#~ msgid "35"
#~ msgstr "3"

#, fuzzy
#~ msgid "Change Item Type"
#~ msgstr "텍스트로 바꾸기"

#, fuzzy
#~ msgid "Include soldermask over vias"
#~ msgstr "비아에서 솔더 마스크 제거"

#~ msgid "Cannot start routing from a graphic."
#~ msgstr "그래픽 개체로부터 라우팅을 시작할 수 없습니다."

#, c-format
#~ msgid ""
#~ "Event file: %s\n"
#~ "Board dump: %s"
#~ msgstr ""
#~ "이벤트 파일: %s\n"
#~ "기판 덤프: %s"

#~ msgid "Board Thickness"
#~ msgstr "보드 두께"

#~ msgid "You need to select DC source"
#~ msgstr "DC 소스를 선택하여야 합니다"

#~ msgid "No valid simulation is configured."
#~ msgstr "유효한 시뮬레이션이 설정되지 않았습니다."

#~ msgid ""
#~ "A valid simulation can be configured by selecting a simulation tab, "
#~ "setting the simulation parameters and clicking the OK button with the tab "
#~ "selected."
#~ msgstr ""
#~ "유효한 시뮬레이션은 시뮬레이션 탭을 선택하여 시뮬레이션 매개변수를 설정한 "
#~ "후, 탭이 선택된 상태에서 OK 버튼을 누름으로써 설정할 수 있습니다."

#~ msgid "Exit Without Valid Simulation"
#~ msgstr "유효한 시뮬레이션 없이 종료"

#~ msgid "Configure Valid Simulation"
#~ msgstr "유효한 시뮬레이션 설정"

#~ msgid "DC Transfer"
#~ msgstr "DC 전송"

#~ msgid "Distortion"
#~ msgstr "왜곡"

#~ msgid "Number of points:"
#~ msgstr "포인트 개수:"

#~ msgid "Noise"
#~ msgstr "노이즈"

#~ msgid "This tab has no settings"
#~ msgstr "이 탭에는 설정이 없습니다"

#~ msgid "(optional; default off)"
#~ msgstr "(선택 사항; 기본값 꺼짐)"

#~ msgid "Transient"
#~ msgstr "과도현상"

#~ msgid "Simulation Command"
#~ msgstr "시뮬레이션 명령"

#~ msgid "100"
#~ msgstr "100"

#~ msgid "50"
#~ msgstr "50"

#~ msgid "noise [(V or A)^2/Hz]"
#~ msgstr "노이즈 [(V or A)^2/Hz]"

#, c-format
#~ msgid "Plot%u - "
#~ msgstr "플롯%u - "

#~ msgid "DC Sweep"
#~ msgstr "DC 스윕"

#~ msgid "Pole-zero"
#~ msgstr "극점-영점"

#~ msgid "UNKNOWN!"
#~ msgstr "알려지지 않음!"

#~ msgid "Spice value cannot be empty"
#~ msgstr "Spice 값은 비워둘 수 없습니다"

#~ msgid "Invalid Spice value string"
#~ msgstr "유효하지 않은 Spice 값 문자열"

#~ msgid "Invalid unit prefix"
#~ msgstr "잘못된 단위 접두사"

#~ msgid "Move Activate"
#~ msgstr "이동 활성화"

#~ msgid "Symbol Move Activate"
#~ msgstr "심볼 이동 활성화"

#~ msgid "New Plot"
#~ msgstr "새 플롯"

#~ msgid "Simulation Command..."
#~ msgstr "시뮬레이션 명령..."

#, c-format
#~ msgid "Removing downloaded archive '%s'."
#~ msgstr "다운로드한 보관문서 '%s'를 삭제합니다."

#~ msgid "Extracted package\n"
#~ msgstr "추출된 패키지\n"

#~ msgid "Do not tent vias"
#~ msgstr "비아를 덮지 않기"

#~ msgid "DRC violation: highlight obstacles"
#~ msgstr "DRC 위반: 장애물 강조 표시"

#~ msgid "DRC violation: shove tracks and vias"
#~ msgstr "DRC 위반: 배선과 비아 밀어내기"

#~ msgid "DRC violation: walk around obstacles"
#~ msgstr "DRC 위반: 장애물 둘러보기"

#~ msgid "Free angle mode (no shove/walkaround)"
#~ msgstr "자유 각도 모드 (밀어내기 / 둘러보기 없음)"

#~ msgid "No modifier"
#~ msgstr "수식 키 없음"

#~ msgid "Track Editing"
#~ msgstr "배선 편집"

#~ msgid "Mouse drag track behavior:"
#~ msgstr "마우스 드래그시의 배선 동작:"

#~ msgid ""
#~ "Choose the action to perform when dragging a track segment with the mouse"
#~ msgstr "배선의 세그먼트를 마우스로 드래그할 때 취할 행동을 선택하세요"

#~ msgid "Moves the track segment without moving connected tracks"
#~ msgstr "연결된 배선을 움직이지 않고 배선 세그먼트 움직이기"

#, c-format
#~ msgid "Pad %s differs."
#~ msgstr "패드 %s가 다릅니다."

#, c-format
#~ msgid "Pad %s has overrides."
#~ msgstr "패드 %s에 재정의가 있습니다."

#~ msgid "Converting zone fills"
#~ msgstr "영역 채우기 변환"

#~ msgid "Convert Zone(s)"
#~ msgstr "영역 변환"

#~ msgid "Loading zones..."
#~ msgstr "영역 불러오는 중..."

#~ msgid "Legacy Zone Warning"
#~ msgstr "레거시 영역 경고"

#~ msgid ""
#~ "The segment zone fill mode is no longer supported.\n"
#~ "Convert zones to smoothed polygon fills?"
#~ msgstr ""
#~ "세그먼트 채우기 모드는 더 이상 지원되지 않습니다.\n"
#~ "영역을 부드러운 다각형 채우기로 변환할까요?"

#~ msgid "Convert shapes to polygon"
#~ msgstr "도형을 다각형으로 변환"

#~ msgid "Convert shapes to zone"
#~ msgstr "모양을 영역으로 변환"

#~ msgid "Convert polygons to lines"
#~ msgstr "다각형을 선으로 변환"

#~ msgid "Create arc from line segment"
#~ msgstr "선 세그먼트로부터 호 작성"

#~ msgid "Draw a line segment"
#~ msgstr "선 세그먼트 그리기"

#~ msgid "Place a text"
#~ msgstr "텍스트 배치"

#~ msgid "Place a DXF_SVG drawing"
#~ msgstr "DXF_SVG 도면 배치"

#~ msgid "Move the footprint reference anchor"
#~ msgstr "풋프린트 참조 앵커 이동"

#~ msgid "Align to top"
#~ msgstr "위쪽 맞춤"

#~ msgid "Align to bottom"
#~ msgstr "아래쪽 맞춤"

#~ msgid "Align to left"
#~ msgstr "왼쪽 맞춤"

#~ msgid "Align to right"
#~ msgstr "오른쪽 맞춤"

#~ msgid "Distribute horizontally"
#~ msgstr "수평 배치"

#~ msgid "Distribute vertically"
#~ msgstr "수직 배치"

#~ msgid "Add a zone cutout"
#~ msgstr "영역 컷아웃을 추가"

#~ msgid "Add a graphical polygon"
#~ msgstr "그래픽 다각형 추가"

#, c-format
#~ msgid "Rule Area on %s"
#~ msgstr "%s의 규칙 영역"

#~ msgid "Edit ignored violations..."
#~ msgstr "무시된 위반 수정..."

#~ msgid "Symbol descriptions differ."
#~ msgstr "심볼 설명이 다릅니다."

#, fuzzy
#~ msgid "Draw pins"
#~ msgstr "도면"

#, fuzzy
#~ msgid "Draw lines"
#~ msgstr "선 그리기"

#~ msgid "Text items must have some content."
#~ msgstr "텍스트 개체는 내용이 있어야 합니다."

#~ msgid "Fabrication Attributes"
#~ msgstr "기판 제조 속성"

#, c-format
#~ msgid "Update %s properties."
#~ msgstr "%s 속성을 업데이트합니다."

#, c-format
#~ msgid "Updated %s properties."
#~ msgstr "%s 속성이 업데이트되었습니다."

#, c-format
#~ msgid "Duplicate netclass name '%s'."
#~ msgstr "중복된 네트클래스 이름 '%s'."

#~ msgid "bitmap2component"
#~ msgstr "bitmap을 구성요소로"

#~ msgid "gerbview"
#~ msgstr "gerbview"

#~ msgid "pcbnew"
#~ msgstr "pcbnew"

#~ msgid "Load source image"
#~ msgstr "소스 이미지 로드"

#~ msgid "Quit Image Converter"
#~ msgstr "이미지 변환기 종료"

#~ msgid "Entry contains trailing white space."
#~ msgstr "항목 뒤에 공백이 있습니다."

#~ msgid "Entry contains leading white space."
#~ msgstr "항목 앞에 공백이 있습니다."

#, c-format
#~ msgid "'%s' is not a valid library identifier format."
#~ msgstr "%s은(는) 유효한 라이브러리 식별자 포맷이 아닙니다."

#~ msgid "Library Identifier Validation Error"
#~ msgstr "라이브러리 식별자 검증 오류"

#~ msgid "Only include selected items"
#~ msgstr "선택한 항목만 포함하기"

#~ msgid ""
#~ "Check this option if the symbol has an alternate body style (De Morgan)"
#~ msgstr ""
#~ "심볼에 대체 바디 스타일이 있는 경우 이 옵션을 확인합니다 (드 모르간)"

#~ msgid "The Reference column cannot be hidden."
#~ msgstr "참조 열은 숨겨질 수 없습니다."

#~ msgid ""
#~ "Enable <b>debug</b> logging for Symbol*() functions in this SCH_PLUGIN."
#~ msgstr ""
#~ "이 SCH_PLUGIN에서 Symbol*() 함수에 대한 <b>debug</b> 로깅을 활성화 합니"
#~ "다 ."

#~ msgid "Regular expression <b>symbol name</b> filter."
#~ msgstr "정규 표현식으로 <b>심볼 이름</b> 을 필터링합니다."

#~ msgid ""
#~ "Enter the python symbol which implements the SCH_PLUGIN::Symbol*() "
#~ "functions."
#~ msgstr "SCH_PLUGIN::Symbol*() 함수를 실행하는 python 심볼을 입력하십시오."

#~ msgid "Gerber (experimental)"
#~ msgstr "거버 (실험적 요소)"

#~ msgid "Start point X:"
#~ msgstr "X 시작점:"

#~ msgid "Start point Y:"
#~ msgstr "Y 시작점:"

#~ msgid "Pre-defined widths:"
#~ msgstr "사전 정의된 너비:"

#~ msgid "Options Editor..."
#~ msgstr "옵션 편집기..."

#, c-format
#~ msgid ""
#~ "Could not load footprint '%s' from library '%s'.\n"
#~ "\n"
#~ "%s"
#~ msgstr ""
#~ "풋프린트 '%s'을(를) 라이브러리 '%s'에서 불러올 수 없습니다.\n"
#~ "\n"
#~ "%s"

#~ msgid "Remove Teardrops"
#~ msgstr "눈물 방울(Teardrops) 제거"

#, fuzzy
#~ msgid "Filling Zones"
#~ msgstr "영역 채우기"

#, c-format
#~ msgid "%d teardrops created"
#~ msgstr "%d 눈물방울 생성됨"

#, c-format
#~ msgid "%d teardrops removed."
#~ msgstr "%d 눈물방울이 제거됨."

#~ msgid "Round shapes:"
#~ msgstr "둥근 모양:"

#~ msgid "Rect shapes:"
#~ msgstr "직사각형 모양:"

#~ msgid "Vias and PTH pads"
#~ msgstr "Vias와 PTH 패드"

#~ msgid "Add teardrops to not driiled pads, like SMD"
#~ msgstr "SMD와 같이 드릴패드가 아닌 곳에 눈물 방울을 추가하시오"

#~ msgid "Add teardrops to two connected tracks of different widths"
#~ msgstr "너비가 다른 두 개의 연결된 트랙에 눈물 방울 추가"

#~ msgid ""
#~ "Pads inside a  copper zone outline of same net have no teardrop.\n"
#~ "Check this option to allow teardrop for these pads."
#~ msgstr ""
#~ "동일한 네트의 구리 영역 아웃라인 내부의 패드에는 눈물 방울이 없습니다.\n"
#~ "이 패드에 눈물방울을 허용하려면 이 옵션을 선택합니다."

#~ msgid "Number of segments to build a teardrop with curved shape"
#~ msgstr "곡선 모양의 눈물방울을 만들기 위한 세그먼트 수"

#, fuzzy
#~ msgid "Generate raw teardrops"
#~ msgstr "생성 오류"

#~ msgid "(Shapes will be adjusted for clearances on next zone fill.)"
#~ msgstr "(다음 영역 채우기에서 간격에 맞게 모양이 조정됩니다.)"

#~ msgid "Add teardrops"
#~ msgstr "눈물 방울 추가"

#, fuzzy
#~ msgid "Add teardrops and refill zones"
#~ msgstr "패드영역에 티어드롭을 놓습니다"

#~ msgid "Board Layer for Outline"
#~ msgstr "외곽선용 기판 레이어"

#~ msgid ""
#~ "Choose the board layer to place the outline.\n"
#~ "The reference designator and value are always placed on the silk screen "
#~ "layer (but will be marked invisible)."
#~ msgstr ""
#~ "외곽선을 그릴 기판 레이어를 선택합니다.\n"
#~ "참조 지정자와 값은 항상 실크 스크린 레이어에 배치됩니다 (단, 숨겨짐으로 설"
#~ "정됩니다)."

#, fuzzy
#~ msgid "(De Morgan) "
#~ msgstr "드모르간"

#, fuzzy
#~ msgid "Update teardrops before performing DRC"
#~ msgstr "DRC 수행 전 모든 영역 다시 채우기"

#~ msgid "&Find"
#~ msgstr "찾기 (&F)"

#~ msgid "Replace &All"
#~ msgstr "모두 바꾸기 (&A)"

#~ msgid "Sheet file must have a '.kicad_sch' extension."
#~ msgstr "시트 파일의 확장자는 반드시 '.kicad_sch' 여야 합니다."

#~ msgid "Invalid Schematic File"
#~ msgstr "잘못된 회로도 파일"

#~ msgid "Volts"
#~ msgstr "볼트"

#~ msgid "Amperes"
#~ msgstr "암페어"

#~ msgid "Hertz"
#~ msgstr "헤르츠"

#~ msgid "Number of points"
#~ msgstr "포인트 수"

#~ msgid "Start frequency [Hz]"
#~ msgstr "시작 주파수 [Hz]"

#~ msgid "Stop frequency [Hz]"
#~ msgstr "정지 주파수 [Hz]"

#~ msgid "Save as CSV"
#~ msgstr "CSV파일로 저장"

#~ msgid "Add Field..."
#~ msgstr "필드 추가..."

#~ msgid "Remove Field..."
#~ msgstr "필드 제거..."

#~ msgid "Export as CSV..."
#~ msgstr "CSV파일로 내보내기..."

#, c-format
#~ msgid "Failed to generate a name for '%s': exceeded UINT64_MAX"
#~ msgstr "'%s'에 대한 이름 생성 실패: UINT64_MAX 초과"

#~ msgid "The name of the field cannot be empty."
#~ msgstr "필드의 이름은 비워 둘 수 없습니다."

#, c-format
#~ msgid ""
#~ "Simulation model type must be the same as of its base class: '%s', but is "
#~ "'%s'"
#~ msgstr "시뮬레이션 모델 유형은 기본 클래스 '%s'와 동일해야 하지만 '%s'임"

#~ msgid ""
#~ "Errors during netlist generation; simulation aborted.\n"
#~ "\n"
#~ msgstr ""
#~ "네트리스트 생성 중 오류; 시뮬레이션이 중단되었습니다.\n"
#~ "\n"

#~ msgid "Simulator..."
#~ msgstr "시뮬레이터..."

#~ msgid "Simulate circuit in SPICE"
#~ msgstr "Spice에서 회로 시뮬레이션"

#~ msgid "Add a junction"
#~ msgstr "접합 추가"

#~ msgid "Add text"
#~ msgstr "텍스트 추가"

#~ msgid "Add a text box"
#~ msgstr "텍스트 상자 추가"

#~ msgid "Add a circle"
#~ msgstr "원 추가"

#~ msgid "Add an arc"
#~ msgstr "호 추가"

#, fuzzy
#~ msgid "PTH and NPTH in separate files"
#~ msgstr "PTH & NPTH를 별도의 파일로"

#~ msgid "KiCad Error"
#~ msgstr "KiCad 오류"

#~ msgid "Constraints Resolution Report"
#~ msgstr "제약 해결 보고서"

#~ msgid "Run clearance resolution tool..."
#~ msgstr "클리어런스 해결 도구 실행..."

#~ msgid "Run constraints resolution tool..."
#~ msgstr "제약 해결 도구 실행..."

#~ msgid "Are you sure you want to delete the entire board?"
#~ msgstr "전체 보드를 삭제 하겠습니까?"

#~ msgid "Are you sure you want to delete the selected items?"
#~ msgstr "선택한 항목을 삭제 하겠습니까?"

#~ msgid "Highlight footprints when symbols selected"
#~ msgstr "심볼이 선택되었을때 연결부 강조"

#~ msgid ""
#~ "Text will not be readable with a thickness greater than\n"
#~ "1/4 its width or height."
#~ msgstr ""
#~ "텍스트의 굵기가 글자 폭 또는 높이의 1/4보다 커지면\n"
#~ "읽을 수 없게 됩니다."

#, c-format
#~ msgid "Footprint Text Box of %s"
#~ msgstr "풋프린트 텍스트 상자 %s"

#, fuzzy
#~ msgid "Check Footprint against Library"
#~ msgstr "라이브러리에 대한 보드 풋프린트 확인 중..."

#, fuzzy
#~ msgid "The current configuration does not include the library."
#~ msgstr "현재 구성에 라이브러리 '%s'이(가) 포함되어 있지 않습니다."

#, fuzzy
#~ msgid "Footprint matches library equivalent."
#~ msgstr "라이브러리 에디터 실행"

#, fuzzy
#~ msgid "Check Footprint against Library..."
#~ msgstr "라이브러리에 대한 보드 풋프린트 확인 중..."

#~ msgid "Power symbol value field text cannot be changed."
#~ msgstr "전원 심볼 값 필드 텍스트는 변경할 수 없습니다."

#, c-format
#~ msgid "Could not find a pin named '%s' in simulation model of type '%s'"
#~ msgstr "'%s'라는 핀을 '%s' 유형의 시뮬레이션 모델에서 찾을 수 없음"

#, c-format
#~ msgid ""
#~ "Could not find a parameter named '%s' in simulation model of type '%s'"
#~ msgstr "'%s'라는 매개 변수를 '%s' 유형의 시뮬레이션 모델에서 찾을 수 없음"

#, c-format
#~ msgid "V(%s) (gain)"
#~ msgstr "V(%s) (게인)"

#, c-format
#~ msgid "V(%s) (phase)"
#~ msgstr "V(%s) (위상)"

#~ msgid "Unknown SIM_VALUE type"
#~ msgstr "알 수 없는 SIM_VALUE 유형"

#~ msgid ""
#~ "After packages are (un)installed KiCad may need to be restarted to "
#~ "reflect changes in the global library table."
#~ msgstr ""
#~ "패키지를 (제거) 설치한 후 전역 라이브러리 테이블의 변경 사항을 반영하기 위"
#~ "해 KiCad를 다시 시작해야 할 수 있습니다."

#, c-format
#~ msgid "Checking board setup constraints track width: min %s."
#~ msgstr "보드 설정에서 제한 배선 폭을 확인 중: 최소 %s."

#, c-format
#~ msgid "Checking board setup constraints via diameter: min %s."
#~ msgstr "기판 설정에 따른 제한 비아 홀 지름 확인 중 :최소 %s."

#, c-format
#~ msgid "Checking board setup constraints hole size: min %s."
#~ msgstr "기판 설정에 따른 제한 구멍 크기 확인 중 :최소 %s."

#, c-format
#~ msgid "Checking board setup constraints clearance: min %s."
#~ msgstr "기판 설정에 따른 제한 간격 확인 중 :최소 %s."

#, c-format
#~ msgid "Checking board setup constraints hole to hole: min %s."
#~ msgstr "구멍 대 구멍: 최소 %s 보드 설정 제약 조건 확인."

#~ msgid "Create Netlist and Run Simulator Command"
#~ msgstr "네트리스트 생성 및 시뮬레이터 명령줄 실행"

#~ msgid "Add signal by name:"
#~ msgstr "이름으로 신호 추가:"

#~ msgid "Add Signals"
#~ msgstr "신호 추가"

#~ msgid "Path Substitutions:"
#~ msgstr "경로 대체:"

#~ msgid "Add signals to plot"
#~ msgstr "플롯에 신호 추가"

#~ msgid "Probe"
#~ msgstr "프로브"

#~ msgid "Probe signals on the schematic"
#~ msgstr "회로도에서의 신호 조사"

#~ msgid "Tune component values"
#~ msgstr "컴포넌트 값 조정"

#~ msgid "Simulation command and settings"
#~ msgstr "시뮬레이션 명령 및 설정"

#~ msgid " (mag)"
#~ msgstr " (mag)"

#~ msgid "You need to run plot-providing simulation first."
#~ msgstr "플롯 제공 시뮬레이션을 먼저 실행하여야 합니다."

#~ msgid "Remove Signal"
#~ msgstr "신호 제거"

#~ msgid "Remove the signal from the plot"
#~ msgstr "플롯에서 신호 제거"

#~ msgid "Hide Cursor"
#~ msgstr "커서 숨김"

#~ msgid "File"
#~ msgstr "파일"

#~ msgid "Add Signals..."
#~ msgstr "신호 추가..."

#~ msgid "Probe from schematics"
#~ msgstr "회로도에서 검사"

#~ msgid "Tune Component Value"
#~ msgstr "컴포넌트 값 조정"

#~ msgid ""
#~ "Shows current simulation's netlist. Useful for debugging SPICE errors."
#~ msgstr ""
#~ "현재 시뮬레이션의 네트리스트를 표시합니다. Spice 오류를 디버깅할 때 유용합"
#~ "니다."

#~ msgid "Settings..."
#~ msgstr "설정..."

#~ msgid "Show &Grid"
#~ msgstr "격자 표시 (&G)"

#~ msgid "White Background"
#~ msgstr "흰 바탕"

#~ msgid "View"
#~ msgstr "보기"

#~ msgid "Signals"
#~ msgstr "신호"

#~ msgid "Cursors"
#~ msgstr "커서"

#~ msgid "Reannotate:"
#~ msgstr "주석 재작성:"

#~ msgid "Text Width:"
#~ msgstr "텍스트 너비:"

#~ msgid "Text Height:"
#~ msgstr "텍스트 높이:"

#~ msgid "Res&tore unused layers"
#~ msgstr "사용하지 않은 레이어 복원 (&t)"

#~ msgid "Remove Unused Pads"
#~ msgstr "미사용 패드 제거"

#~ msgid "Reading file "
#~ msgstr "파일 읽는중 "

#~ msgid "Filter other symbol fields by name:"
#~ msgstr "이름으로 다른 심볼 필드 필터링:"

#~ msgid "Last Change"
#~ msgstr "마지막 변경"

#, c-format
#~ msgid "Add %s 'exclude from position files' fabrication attribute."
#~ msgstr "%s '위치 파일에서 제외' 제작 속성을 추가합니다."

#, c-format
#~ msgid "Remove %s 'exclude from position files' fabrication attribute."
#~ msgstr "%s '위치 파일에서 제외' 제작 속성을 제거합니다."

#, c-format
#~ msgid "Added %s 'exclude from position files' fabrication attribute."
#~ msgstr "%s '위치 파일에서 제외' 제작 속성을 추가합니다."

#, c-format
#~ msgid "Removed %s 'exclude from position files' fabrication attribute."
#~ msgstr "%s '위치 파일에서 제외' 제작 속성이 제거되었습니다."

#~ msgid "Libraries by Scope"
#~ msgstr "범위별 라이브러리"

#~ msgid "Path Substitutions"
#~ msgstr "경로 대체"

#~ msgid "Edge Clearance Warning"
#~ msgstr "모서리 클리어런스 경고"

#~ msgid "Netlist Load Error."
#~ msgstr "네트리스트 불러오기 오류."

#~ msgid "Netlist Load Error"
#~ msgstr "네트리스트 불러오기 오류"

#~ msgid "Print border and title block"
#~ msgstr "테두리 및 제목 블록 인쇄"

#~ msgid "Print sheet &reference and title block"
#~ msgstr "시트 참조와 타이틀 블록을 출력 (&r)"

#~ msgid "Print in &black and white only"
#~ msgstr "흑백으로만 출력 (&b)"

#~ msgid "Symbol Annotation"
#~ msgstr "심볼 주석"

#~ msgid "Pin to Pin Connections"
#~ msgstr "핀과 핀 연결"

#~ msgid "Color Theme"
#~ msgstr "색상 테마"

#, fuzzy
#~ msgid "Black and white only"
#~ msgstr "흑백"

#~ msgid "Plot border and title block"
#~ msgstr "외곽선과 제목 블록을 플롯"

#, fuzzy
#~ msgid "Plot in black and white"
#~ msgstr "흑백으로만 출력 (&b)"

#~ msgid "Pre-defined track and via dimensions:"
#~ msgstr "사전 정의된 배선 및 비아 치수:"

#~ msgid "Value may not be empty."
#~ msgstr "값을 비워둘 수 없습니다."

#~ msgid "Add Junctions to Selection where needed"
#~ msgstr "필요에 따라 선택 영역에 접합 추가"

#~ msgid "Recursively annotate subsheets"
#~ msgstr "하위 시트에 반복적으로 주석 달기"

#, fuzzy, c-format
#~ msgid ""
#~ "Error reading simulation model library '%s':\n"
#~ "%s"
#~ msgstr "시뮬레이션 모델 라이브러리 '%s'를로드 중 오류 발생: %s"

#~ msgid "Pin Text"
#~ msgstr "핀 텍스트"

#~ msgid "Hide Signal"
#~ msgstr "신호 숨김"

#~ msgid "Divide a wire into segments which can be dragged independently"
#~ msgstr "도선을 독립적으로 드래그될 수 있는 세그먼트로 분할"

#~ msgid "Divide a bus into segments which can be dragged independently"
#~ msgstr "버스를 독립적으로 드래그될 수 있는 세그먼트로 분할"

#~ msgid " X "
#~ msgstr " X "

#~ msgid "Change Edit Method"
#~ msgstr "편집 방식 변경"

#~ msgid "Change edit method constraints"
#~ msgstr "편집 방식의 제약 변경"

#~ msgid "Adjust passive symbol values (e.g. M -> Meg; 100 nF -> 100n)"
#~ msgstr "수동 심볼값을 조정 (예시: M -> Meg; 100 nF -> 100n)"

#~ msgid "Sim Parameters"
#~ msgstr "시뮬레이션 매개변수"

#~ msgid "Save as Image"
#~ msgstr "이미지로 저장"

#~ msgid "Save as .csv File"
#~ msgstr ".csv 파일로 저장"

#~ msgid "Add a power port"
#~ msgstr "전원 포트 추가"

#~ msgid "Invalid Bezier curve created"
#~ msgstr "잘못된 베지어 곡선이 생성됨"

#~ msgid "Open schematic in Eeschema"
#~ msgstr "Eeschema에서 회로도 열기"

#~ msgid "Min Width"
#~ msgstr "최소 너비"

#~ msgid "Viewports (Shift+Tab):"
#~ msgstr "뷰포트(Shift+Tab):"

#~ msgid "Bitmap size:"
#~ msgstr "비트맵 크기:"

#~ msgid "Output Parameters"
#~ msgstr "출력 매개변수"

#~ msgid "Load Bitmap"
#~ msgstr "비트맵 불러오기"

#~ msgid "Image Options"
#~ msgstr "이미지 옵션"

#~ msgid "Multiple objects selected"
#~ msgstr "여러 객체가 선택됨"

#~ msgid ""
#~ "# 1 - Full documentation\n"
#~ "\n"
#~ "The Eeschema documentation (*eeschema.html*) describes this intermediate "
#~ "netlist and gives examples(chapter ***creating customized netlists and "
#~ "bom files***).\n"
#~ "\n"
#~ "# 2 - The intermediate Netlist File\n"
#~ "\n"
#~ "BOM files (and netlist files) can be created from an *Intermediate "
#~ "netlist file* created by Eeschema.\n"
#~ "\n"
#~ "This file uses XML syntax and is called the intermediate netlist. The "
#~ "intermediate netlist includes a large amount of data about your board and "
#~ "because of this, it can be used with post-processing to create a BOM or "
#~ "other reports.\n"
#~ "\n"
#~ "Depending on the output (BOM or netlist), different subsets of the "
#~ "complete Intermediate Netlist file will be used in the post-processing.\n"
#~ "\n"
#~ "# 3 - Conversion to a new format\n"
#~ "\n"
#~ "By applying a post-processing filter to the Intermediate netlist file you "
#~ "can generate foreign netlist files as well as BOM files. Because this "
#~ "conversion is a text to text transformation, this post-processing filter "
#~ "can be written using *Python*, *XSLT*, or any other tool capable of "
#~ "taking XML as input.\n"
#~ "\n"
#~ "XSLT itself is a XML language suitable for XML transformations. There is "
#~ "a free program called `xsltproc` that you can download and install. The "
#~ "`xsltproc` program can be used to read the Intermediate XML netlist input "
#~ "file, apply a style-sheet to transform the input, and save the results in "
#~ "an output file. Use of `xsltproc` requires a style-sheet file using XSLT "
#~ "conventions. The full conversion process is handled by Eeschema, after it "
#~ "is configured once to run `xsltproc` in a specific way.\n"
#~ "\n"
#~ "A Python script is somewhat more easy to create.\n"
#~ "\n"
#~ "# 4 - Initialization of the dialog window\n"
#~ "\n"
#~ "You should add a new plugin (a script) in the plugin list by clicking on "
#~ "the Add Plugin button.\n"
#~ "\n"
#~ "## 4.1 - Plugin Configuration Parameters\n"
#~ "\n"
#~ "The Eeschema plug-in configuration dialog requires the following "
#~ "information:\n"
#~ "\n"
#~ " * The title: for instance, the name of the netlist format.\n"
#~ " * The command line to launch the converter (usually a script).\n"
#~ "\n"
#~ "***Note (Windows only):***\n"
#~ "*By default, the command line runs with hidden console window and output "
#~ "is redirected to \"Plugin info\" field. To show the window of the running "
#~ "command, set the checkbox \"Show console window\".*\n"
#~ "\n"
#~ "Once you click on the generate button the following will happen:\n"
#~ "\n"
#~ "1. Eeschema creates an intermediate netlist file \\*.xml, for instance "
#~ "`test.xml`.\n"
#~ "2. Eeschema runs the script from the command line to create the final "
#~ "output file.\n"
#~ "\n"
#~ "## 4.2 - Generate netlist files with the command line\n"
#~ "\n"
#~ "Assuming we are using the program `xsltproc.exe` to apply the sheet style "
#~ "to the intermediate file, `xsltproc.exe` is executed with the following "
#~ "command.\n"
#~ "\n"
#~ "```\n"
#~ "xsltproc.exe -o <output filename> <style-sheet filename> <input XML file "
#~ "to convert>\n"
#~ "```\n"
#~ "\n"
#~ "On Windows the command line is the following.\n"
#~ "\n"
#~ "```\n"
#~ "f:/kicad/bin/xsltproc.exe -o \"%O\" f:/kicad/bin/plugins/myconverter.xsl "
#~ "\"%I\"\n"
#~ "```\n"
#~ "\n"
#~ "On Linux the command becomes as following.\n"
#~ "\n"
#~ "```\n"
#~ "xsltproc -o \"%O\" /usr/local/kicad/bin/plugins/myconverter .xsl \"%I\"\n"
#~ "```\n"
#~ "where `myconverter.xsl` is the style-sheet that you are applying.\n"
#~ "\n"
#~ "Do not forget the double quotes around the file names, this allows them "
#~ "to have spaces after the substitution by Eeschema.\n"
#~ "\n"
#~ "If a Python script is used, the command line is something like (depending "
#~ "on the Python script):\n"
#~ "\n"
#~ "```\n"
#~ "python f:/kicad/bin/plugins/bom-in-python/myconverter.py \"%I\" \"%O\"\n"
#~ "```\n"
#~ "\n"
#~ "or\n"
#~ "\n"
#~ "```\n"
#~ "python /usr/local/kicad/bin/plugins/bom-in-python/myconverter .xsl \"%I\" "
#~ "\"%O\"\n"
#~ "```\n"
#~ "\n"
#~ "The command line format accepts parameters for filenames. The supported "
#~ "formatting parameters are:\n"
#~ "\n"
#~ " * `%B`: base filename of selected output file, minus path and "
#~ "extension.\n"
#~ " * `%P`: project directory, without name and without trailing '/'.\n"
#~ " * `%I`: complete filename and path of the temporary input file\n"
#~ "(the intermediate net file).\n"
#~ " * `%O`: complete filename and path (but without extension) of the user\n"
#~ "chosen output file.\n"
#~ "\n"
#~ "`%I` will be replaced by the actual intermediate file name (usually the "
#~ "full root sheet filename with extension \".xml\").\n"
#~ "`%O` will be replaced by the actual output file name (the full root sheet "
#~ "filename minus extension).\n"
#~ "`%B` will be replaced by the actual output short file name (the short "
#~ "root sheet filename minus extension).\n"
#~ "`%P` will be replaced by the actual current project path.\n"
#~ "\n"
#~ "## 4.3 - Command line format:\n"
#~ "\n"
#~ "### 4.3.1 - Remark:\n"
#~ "\n"
#~ "Most of time, the created file must have an extension, depending on its "
#~ "type.\n"
#~ "Therefore you have to add to the option ***%O*** the right file "
#~ "extension.\n"
#~ "\n"
#~ "For instance:\n"
#~ "\n"
#~ " * **%O.csv** to create a .csv file (comma separated value file).\n"
#~ " * **%O.htm** to create a .html file.\n"
#~ " * **%O.bom** to create a .bom file.\n"
#~ "\n"
#~ "### 4.3.2 Example for xsltproc:\n"
#~ "\n"
#~ "The command line format for xsltproc is the following:\n"
#~ "\n"
#~ "```\n"
#~ "<path of xsltproc> xsltproc <xsltproc parameters>\n"
#~ "```\n"
#~ "\n"
#~ "On Windows:\n"
#~ "```\n"
#~ "f:/kicad/bin/xsltproc.exe -o \"%O.bom\" f:/kicad/bin/plugins/"
#~ "netlist_form_pads-pcb.xsl \"%I\"\n"
#~ "```\n"
#~ "\n"
#~ "On Linux:\n"
#~ "```\n"
#~ "xsltproc -o \"%O.bom\" /usr/local/kicad/bin/plugins/netlist_form_pads-pcb."
#~ "xsl \"%I\"\n"
#~ "```\n"
#~ "\n"
#~ "The above examples assume `xsltproc` is installed on your PC under "
#~ "Windows and xsl files located in `<path_to_kicad>/kicad/bin/plugins/`.\n"
#~ "\n"
#~ "\n"
#~ "### 4.3.3 Example for Python scripts:\n"
#~ "\n"
#~ "Assuming python is installed on your PC, and python scripts are located "
#~ "in\n"
#~ "\n"
#~ " `<path_to_kicad>/kicad/bin/plugins/bom-in-python/`,\n"
#~ "\n"
#~ "the command line format for python is something like:\n"
#~ "\n"
#~ "```\n"
#~ "python <script file name> <input filename> <output filename>\n"
#~ "```\n"
#~ "\n"
#~ "On Windows:\n"
#~ "```\n"
#~ "python.exe f:/kicad/bin/plugins/bom-in-python/my_python_script.py \"%I\" "
#~ "\"%O.html\"\n"
#~ "```\n"
#~ "\n"
#~ "On Linux:\n"
#~ "```\n"
#~ "python /usr/local/kicad/bin/plugins/bom-in-python/my_python_script.py "
#~ "\"%I\" \"%O.csv\"\n"
#~ "```\n"
#~ msgstr ""
#~ "# 1 - 전체 문서\n"
#~ "\n"
#~ "Eeschema 문서 (*eeschema.html*) 은 해당 중간 네트리스트를 설명하고, 예시"
#~ "를 제시합니다. (챕터 ***사용자 정의 네트리스트와 BOM 파일***)\n"
#~ "\n"
#~ "# 2 - 중간 네트리스트 파일\n"
#~ "\n"
#~ "BOM 파일 (과 네트리스트 파일) 은 Eeschema에 의해 만들어진 *중간 네트리스"
#~ "트 파일* 로부터 생성될 수 있습니다.\n"
#~ "\n"
#~ "이러한 파일들은 XML 문법 구조를 따르며, 중간 네트리스트라 불립니다. 중간 "
#~ "네트리스트는 당신의 보드에 대한 많은 양의 데이터를 담고 있으며, 이 때문에 "
#~ "BOM 또는 다른 기록을 작성할 때 사용될 수 있습니다.\n"
#~ "\n"
#~ "출력 결과가 무엇인지에 따라 (BOM 또는 네트리스트), 완전한 중간 네트리스트"
#~ "의 하위 집합들이 후처리에 사용됩니다.\n"
#~ "\n"
#~ "# 3 - 새로운 포맷으로 변환\n"
#~ "\n"
#~ "후처리 필터를 중간 네트리스트에 적용함으로써, 당신은 외부 네트리스트 파일"
#~ "과 BOM 파일을 생성할 수 있습니다. 변환이 문자 간 이루어지기 때문에, 이 후"
#~ "처리 필터는 *Python*, *XSLT* 또는 XML을 입력값으로 받아들일 수 있는 모든 "
#~ "툴로 작성될 수 있습니다.\n"
#~ "\n"
#~ "XSLT 자체는 XML 변환에 최적인 XML 언어입니다. `xsltproc` 이라는 무료 프로"
#~ "그램을 설치함으로써 중급 XML 네트리스트 입력 파일을 읽어들이거나, 입력 파"
#~ "일을 변환하기 위해 스타일시트를 적용하거나, 결과값을 출력하여 저장할 수 있"
#~ "습니다. `xsltproc`을 사용하기 위해서는 XSLT 변환을 위한 스타일시트 파일이 "
#~ "필요합니다. 모든 변환 과정은 (`xsltproc`을 실행하도록 특별한 방법으로 설정"
#~ "한 이후) Eeschema에 의해 이루어집니다.\n"
#~ "\n"
#~ "Python 스크립트는 훨씬 쉽게 생성할 수 있습니다.\n"
#~ "\n"
#~ "# 4 - 대화 창 초기화\n"
#~ "\n"
#~ "\"플러그인 추가하기\" 버튼을 누름으로써 플러그인 (스크립트) 를 추가해야 합"
#~ "니다.\n"
#~ "\n"
#~ "## 4.1 - 플러그인 설정 매개변수\n"
#~ "\n"
#~ "Eeschema 플러그인 설정 대화 상자는 다음의 정보를 필요로 합니다:\n"
#~ "\n"
#~ " * 제목: 예를 들면, 네트리스트 포맷의 이름.\n"
#~ " * 변환기를 실행시키기 위한 명령줄 (주로 스크립트 형태로 제작됩니다).\n"
#~ "\n"
#~ "***주의사항 (Windows 사용자 전용):***\n"
#~ "* 기본값으로, 명령줄은 숨겨진 콘솔 창에서 실행되고, 출력값은 \"플러그인 정"
#~ "보\" 필드에 리디렉션됩니다. 실행되고 있는 명령을 창에 보이기 위해서는, "
#~ "\"콘솔 창 표시\" 체크박스를 체크하세요. *\n"
#~ "\n"
#~ "생성 버튼을 클릭하면 다음과 같은 행동이 실행됩니다 :\n"
#~ "\n"
#~ "1. Eeschema는 \\*.xml 형식의 중간 네트리스트 파일을 생성합니다. 예를 들어 "
#~ "`test.xml`.\n"
#~ "2. Eeschema는 명령줄의 스크립트를 실행하여 최종 출력 파일을 생성합니다.\n"
#~ "\n"
#~ "## 4.2 - 명령줄을 통해 네트리스트 파일 생성하기\n"
#~ "\n"
#~ "`xsltproc.exe` 프로그램을 사용한다고 가정하고, 스타일시트를 중간 파일에 적"
#~ "용하기 위해선 `xsltproc.exe`는 다음과 같은 명령줄로 실행되어야 합니다.\n"
#~ "\n"
#~ "```\n"
#~ "xsltproc.exe -o <출력 파일명> <스타일시트 파일명> <변환할 XML 파일명>\n"
#~ "```\n"
#~ "\n"
#~ "Windows 운영체제에서 명령줄은 다음과 같습니다.\n"
#~ "\n"
#~ "```\n"
#~ "f:/kicad/bin/xsltproc.exe -o \"%O\" f:/kicad/bin/plugins/myconverter.xsl "
#~ "\"%I\"\n"
#~ "```\n"
#~ "\n"
#~ "리눅스에서 명령줄은 다음과 같습니다.\n"
#~ "\n"
#~ "```\n"
#~ "xsltproc -o \"%O\" /usr/local/kicad/bin/plugins/myconverter.xsl \"%I\"\n"
#~ "```\n"
#~ "이때 `myconverter.xsl`은 여러분이 적용하고자 하는 스타일시트 파일명입니"
#~ "다.\n"
#~ "\n"
#~ "파일명 양 옆의 쌍따옴표를 잊지 마세요. 이들은 Eeschema에 의해 파일이 대체"
#~ "된 후 공백을 갖게 해 줍니다.\n"
#~ "\n"
#~ "Python 스크립트를 사용할 경우, 명령줄은 다음과 비슷해야 합니다 (어떤 "
#~ "Python 스크립트를 쓰느냐에 따라 다릅니다):\n"
#~ "\n"
#~ "```\n"
#~ "python f:/kicad/bin/plugins/bom-in-python/myconverter.py \"%I\" \"%O\"\n"
#~ "```\n"
#~ "\n"
#~ "또는\n"
#~ "\n"
#~ "```\n"
#~ "python /usr/local/kicad/bin/plugins/bom-in-python/myconverter .xsl \"%I\" "
#~ "\"%O\"\n"
#~ "```\n"
#~ "\n"
#~ "명령줄 포맷은 파일명을 위한 매개변수를 받습니다. 형식 지정용 매개변수는 다"
#~ "음과 같습니다:\n"
#~ "\n"
#~ " * `%B`: 선택한 출력 파일에 대한 기본 파일명, 확장자와 경로 제외\n"
#~ " * `%P`: 프로젝트 디렉토리, 이름과 딸려오는 '/' 제외\n"
#~ " * `%I`: 임시 입력 파일 (중간 네트 파일) 의 \n"
#~ "완전한 파일명과 경로\n"
#~ " * `%O`: 사용자가 선택한 출력 파일의 완전한 파일명과 경로 \n"
#~ "(확장자 제외)\n"
#~ "\n"
#~ "`%I` 는 실제 중간 파일명으로 대체됩니다 (보통 \".xml\" 확장자를 가진 완전"
#~ "한 루트 시트 파일명).\n"
#~ "`%O` 는 실제 출력 파일명으로 대체됩니다 (확장자를 제외한 완전한 루트 시트 "
#~ "파일명).\n"
#~ "`%B` 는 실제 짧은 출력 파일명으로 대체됩니다 (확장자를 제외한 짧은 루트 시"
#~ "트 파일명)\n"
#~ "`%P` 는 현재 프로젝트 경로로 대체됩니다.\n"
#~ "\n"
#~ "## 4.3 - 명령줄 형식:\n"
#~ "\n"
#~ "### 4.3.1 - 비고:\n"
#~ "\n"
#~ "대부분, 생성된 파일은 파일 형식에 따라 확장자를 가져야 합니다.\n"
#~ "그러므로 여러분은 정확한 파일 확장자를 위해 ***%O*** 옵션을 추가하여야 합"
#~ "니다.\n"
#~ "\n"
#~ "예를 들어:\n"
#~ "\n"
#~ " * **%O.csv** 는 .csv 파일을 생성합니다. (반점으로 구분된 값 파일)\n"
#~ " * **%O.htm** 는 .html 파일을 생성합니다.\n"
#~ " * **%O.bom** 는 .bom 파일을 생성합니다.\n"
#~ "\n"
#~ " ### 4.3.2 xsltproc 예시:\n"
#~ "\n"
#~ "xsltproc을 사용하기 위한 명령줄 형식은 다음과 같습니다:\n"
#~ "\n"
#~ "```\n"
#~ "<xsltproc 경로> xsltproc <xsltproc 매개변수>\n"
#~ "```\n"
#~ "\n"
#~ "Windows에서:\n"
#~ "```\n"
#~ "f:/kicad/bin/xsltproc.exe -o \"%O.bom\" f:/kicad/bin/plugins/"
#~ "netlist_form_pads-pcb.xsl \"%I\"\n"
#~ "```\n"
#~ "\n"
#~ "리눅스에서:\n"
#~ "```\n"
#~ "xsltproc -o \"%O.bom\" /usr/local/kicad/bin/plugins/netlist_form_pads-pcb."
#~ "xsl \"%I\"\n"
#~ "```\n"
#~ "\n"
#~ "위의 예시는 `xsltproc`이 사용자의 PC 내부 Windows 하위에 설치되어 있고, "
#~ "xsl 파일이 `<kicad_경로>/kicad/bin/plugins/` 에 존재한다고 가정합니다.\n"
#~ "\n"
#~ "\n"
#~ "### 4.3.3 Python 스크립트 예시:\n"
#~ "\n"
#~ "Python이 PC에 설치되어 있고, Python 스크립트가 다음의 경로에 저장되어 있다"
#~ "고 가정합니다.\n"
#~ "\n"
#~ " `<kicad_경로>/kicad/bin/plugins/bom-in-python/`\n"
#~ "\n"
#~ "Python을 위한 명령줄은 다음과 비슷합니다:\n"
#~ "\n"
#~ "```\n"
#~ "python <스크립트 파일명> <입력 파일명> <출력 파일명>\n"
#~ "```\n"
#~ "\n"
#~ "Windows에서:\n"
#~ "```\n"
#~ "python.exe f:/kicad/bin/plugins/bom-in-python/my_python_script.py \"%I\" "
#~ "\"%O.html\"\n"
#~ "```\n"
#~ "\n"
#~ "리눅스에서:\n"
#~ "```\n"
#~ "python /usr/local/kicad/bin/plugins/bom-in-python/my_python_script.py "
#~ "\"%I\" \"%O.csv\"\n"
#~ "```\n"

#, c-format
#~ msgid "Failed reading model library '%s'."
#~ msgstr "모델 라이브러리 '%s'을(를) 읽지 못했습니다."

#~ msgid "Source"
#~ msgstr "소스"

#~ msgid "Instance"
#~ msgstr "인스턴스"

#~ msgid "Store in Reference and Value"
#~ msgstr "참조 및 값을 저장"

#~ msgid "Alias of"
#~ msgstr "별칭"

#~ msgid ""
#~ "Multiple symbols have the same reference designator.\n"
#~ "Annotation must be corrected before simulating."
#~ msgstr ""
#~ "여러 심볼의 참조 지정자가 동일합니다.\n"
#~ "시뮬레이션하기 전에 주석을 수정해야 합니다."

#, c-format
#~ msgid "%s describes %lu pins, expected %u"
#~ msgstr "%s 설명 %lu 핀, 예상 %u"

#, c-format
#~ msgid "Invalid symbol pin index: '%s'"
#~ msgstr "잘못된 기호 핀 인덱스: '%s'"

#~ msgid "10A Log"
#~ msgstr "10A 로그"

#~ msgid "15A Log"
#~ msgstr "15A 로그"

#~ msgid "15A Log S"
#~ msgstr "15A 로그 S"

#~ msgid "10C Rev Log"
#~ msgstr "10C 개정 로그"

#~ msgid "15C Rev Log"
#~ msgstr "15C 개정 로그"

#~ msgid "15C Rev Log S"
#~ msgstr "15C 개정 로그 S"

#~ msgid "0B Lin"
#~ msgstr "0B Lin"

#~ msgid "4B S-Curve"
#~ msgstr "4B S-커브"

#~ msgid "5B S-Curve"
#~ msgstr "5B S-커브"

#~ msgid "Characteristic Curve"
#~ msgstr "특성 곡선"

#~ msgid "Gerber files (.g* .lgr .pho)"
#~ msgstr "거버 파일 (.g* .lgr .pho)"

#~ msgid "Ignore source object line widths"
#~ msgstr "소스 개체 선 너비 무시"

#~ msgid "Conversion settings:"
#~ msgstr "변환 설정:"

#~ msgid "Graphics Editing"
#~ msgstr "그래픽 편집"

#~ msgid "Limit actions to 45 degrees from start"
#~ msgstr "시작점에서 45도로 동작 제한"

#, c-format
#~ msgid "No such file: %s"
#~ msgstr "해당 파일 없음: %s"

#~ msgid ""
#~ "** Output already exists. Export aborted. **\n"
#~ "Enable the force overwrite flag to overwrite it."
#~ msgstr ""
#~ "** 출력이 이미 존재합니다. 내보내기가 중단되었습니다. **\n"
#~ "덮어쓰려면 강제 덮어쓰기 플래그를 활성화합니다."

#, c-format
#~ msgid "Read file: '%s'\n"
#~ msgstr "파일 읽기: '%s'\n"

#~ msgid ""
#~ "\n"
#~ "** Error reading kicad_pcb file. **\n"
#~ msgstr ""
#~ "\n"
#~ "** kicad_pcb 파일을 읽는 동안 오류가 발생했습니다. **\n"

#~ msgid "Library ID"
#~ msgstr "라이브러리 ID"

#~ msgid "Cannot remove temporary input file"
#~ msgstr "임시 입력 파일을 제거할 수 없음"

#~ msgid "Origin X"
#~ msgstr "원점 X"

#~ msgid "Origin Y"
#~ msgstr "원점 Y"

#~ msgid "Self-intersecting polygons are not allowed"
#~ msgstr "자체 교차하는 다각형은 허용되지 않습니다"

#~ msgid "Self-intersecting polygons are not allowed."
#~ msgstr "자체 교차하는 다각형은 허용되지 않습니다."

#~ msgid "Shadow on Locked Items"
#~ msgstr "잠긴 항목의 그림자"

#~ msgid "Shadow on Conflicts"
#~ msgstr "풋프린트 충돌시 그림자"

#~ msgid "Show a shadow on overlapping courtyards while moving footprints"
#~ msgstr "풋프린트를 움직이는 동안 겹치는 영역에서 그림자로 표시"

#~ msgid "Layer presets"
#~ msgstr "레이어 사전 설정"

#~ msgid "PcbNew"
#~ msgstr "PCBNEW"

#~ msgid "Eeschema"
#~ msgstr "Eeschema"

#~ msgid "3D configuration directory is unknown"
#~ msgstr "3D 구성 디렉토리를 알 수 없음"

#~ msgid "Write 3D search path list"
#~ msgstr "3D 검색 경로 목록 쓰기"

#~ msgid "Problems writing configuration file"
#~ msgstr "설정 파일 쓰기 문제"

#~ msgid "H Align (fields only):"
#~ msgstr "수평 정렬 (필드 전용):"

#~ msgid "V Align (fields only):"
#~ msgstr "수직 정렬 (필드 전용):"

#, c-format
#~ msgid ""
#~ "'%s' is not a valid symbol library table.\n"
#~ "\n"
#~ "%s"
#~ msgstr ""
#~ "'%s'은(는) 올바른 심볼 라이브러리 테이블이 아닙니다.\n"
#~ "\n"
#~ "%s"

#, c-format
#~ msgid ""
#~ "Error loading global symbol library table.\n"
#~ "\n"
#~ "%s"
#~ msgstr ""
#~ "전역 심볼 라이브러리 테이블 불러오기 오류.\n"
#~ "\n"
#~ "%s"

#, c-format
#~ msgid ""
#~ "Failed to write project symbol library table. Error:\n"
#~ "  %s"
#~ msgstr ""
#~ "프로젝트 심볼 라이브러리 테이블을 쓰지 못했습니다. 오류:\n"
#~ "%s"

#, c-format
#~ msgid "Failed to infer model from Value '%s'"
#~ msgstr "값' %s'에서 모델 유추에 실패"

#, c-format
#~ msgid "Failed to set parameter '%s' to '%s' in model '%s'"
#~ msgstr "매개 변수 '%s'를 '%s'로 모델 '%s'에서 설정하지 못함"

#~ msgid "Warning: Pad size is less than zero."
#~ msgstr "경고: 패드 크기가 0보다 작습니다."

#, fuzzy
#~ msgid "pcb_filename"
#~ msgstr "파일 이름:"

#, fuzzy
#~ msgid "display this message"
#~ msgstr "이 메시지를 숨깁니다."

#, fuzzy
#~ msgid "Kicad2step Converter"
#~ msgstr "KiCad 이미지 변환기"

#, fuzzy
#~ msgid "Alias:"
#~ msgstr "별칭: "

#, c-format
#~ msgid "Duplicate items %s%s\n"
#~ msgstr "중복된 항목 %s%s\n"

#~ msgid "Spice device:"
#~ msgstr "Spice 장치:"

#~ msgid "Default for all sheet instances"
#~ msgstr "모든 시트 인스턴스의 기본값"

#~ msgid ""
#~ "Check to make the unit and reference, value, and\n"
#~ "footprint fields the default for all sheet instances\n"
#~ "of this symbol"
#~ msgstr ""
#~ "이 심볼의 모든 시트 인스턴스에 대한\n"
#~ "단위 및 참조, 값 및 풋프린트 필드를\n"
#~ "기본값으로 설정하려면 선택하시오"

#~ msgid "Spice Model..."
#~ msgstr "스파이스 모델..."

#~ msgid "Modeling accuracy"
#~ msgstr "모델링 정확도"

#~ msgid "Bus has no members to assign netclass to."
#~ msgstr "버스에 네트클래스를 할당할 멤버가 없습니다."

#~ msgid ""
#~ "When two metals are in contact, there will be a potential difference "
#~ "between them that will lead to corrosion.\n"
#~ "In order to avoid corrosion, it is good practice to keep the difference "
#~ "below 300mV.\n"
#~ "\n"
#~ "One of the metal will be anodic (+) and will be attacked. The other one "
#~ "will be cathodic and will be protected.\n"
#~ "In the table below, if the number is positive then the row is anodic and "
#~ "the column is cathodic. \n"
#~ "\n"
#~ "You can use an interface metal, just like with the ENIG surface finish "
#~ "that uses nickel as an interface between gold and copper to prevent "
#~ "corrosion."
#~ msgstr ""
#~ "두 금속이 접촉하면 부식을 일으키는 전위차가 있습니다.\n"
#~ "부식을 방지하려면 차이를 300mV 미만으로 유지하는 것이 좋습니다.\n"
#~ "\n"
#~ "금속 중 하나는 양극(+)이며 공격을 받습니다. 다른 하나는 음극이며 보호됩니"
#~ "다.\n"
#~ "아래 표에서 숫자가 양수이면 행은 양극이고 열은 음극입니다.\n"
#~ "\n"
#~ "부식을 방지하기 위해 금과 구리 사이의 계면으로 니켈을 사용하는 ENIG 표면 "
#~ "마감과 마찬가지로 계면 금속을 사용할 수 있습니다."

#~ msgid "Center:"
#~ msgstr "가운데:"

#, c-format
#~ msgid "minimum gap: %s; "
#~ msgstr "최소 간격: %s; "

#, c-format
#~ msgid "maximum gap: %s; "
#~ msgstr "최대 간격: %s; "

#, c-format
#~ msgid "actual: %s)"
#~ msgstr "실제 값: %s)"

#, c-format
#~ msgid "(expected 'Other'; actual '%s')"
#~ msgstr "(예측 'Other'; 실제 '%s')"

#~ msgid "Remove Teardrops..."
#~ msgstr "Teardrops 제거..."

#~ msgid "File Browser..."
#~ msgstr "파일 탐색기..."

#~ msgid "3D Search Paths"
#~ msgstr "3D 검색 경로"

#, fuzzy
#~ msgid "Search for items"
#~ msgstr "다른 텍스트 항목 검색"

#~ msgid "Exclude components with no pins"
#~ msgstr "핀이 없는 부품 제외"

#~ msgid "ring"
#~ msgstr "링"

#~ msgid "circle"
#~ msgstr "원형"

#~ msgid "Select PCB grid units"
#~ msgstr "PCB 그리드 유닛 선택"

#~ msgid "No-connects"
#~ msgstr "연결되지 않음"

#~ msgid "Delete Field"
#~ msgstr "필드 삭제"

#~ msgid "Select field:"
#~ msgstr "필드 선택:"

#, c-format
#~ msgid "Pin's owner (%d) not found."
#~ msgstr "핀의 소유자 (%d) 를 찾을 수 없습니다."

#, c-format
#~ msgid "Label's owner (%d) not found."
#~ msgstr "라벨의 소유자 (%d) 를 찾을 수 없습니다."

#, c-format
#~ msgid "Bezier's owner (%d) not found."
#~ msgstr "베지에의 소유자 (%d) 를 찾을 수 없습니다."

#, c-format
#~ msgid "Polyline's owner (%d) not found."
#~ msgstr "폴리라인의 소유자 (%d) 를 찾을 수 없습니다."

#, c-format
#~ msgid "Polygon's owner (%d) not found."
#~ msgstr "다각형의 소유자 (%d) 를 찾을 수 없습니다."

#, c-format
#~ msgid "Rounded rectangle's owner (%d) not found."
#~ msgstr "모서리가 둥근 직사각형의 소유자 (%d) 를 찾을 수 없습니다."

#, c-format
#~ msgid "Arc's owner (%d) not found."
#~ msgstr "호의 소유자 (%d) 를 찾을 수 없습니다."

#, c-format
#~ msgid "Line's owner (%d) not found."
#~ msgstr "선의 소유자 (%d) 를 찾을 수 없습니다."

#~ msgid "Signal harness, belonging to the part is not currently supported."
#~ msgstr "부품에 속하는 신호 하네스는 현재 지원되지 않습니다."

#~ msgid "Harness connector, belonging to the part is not currently supported."
#~ msgstr "부품에 속한 하네스 커넥터는 현재 지원되지 않습니다."

#, c-format
#~ msgid "Harness entry's parent (%d) not found."
#~ msgstr "하네스 항목의 상위 항목(%d)을 찾을 수 없습니다."

#, c-format
#~ msgid "Harness type's parent (%d) not found."
#~ msgstr "하네스 유형의 상위(%d)를 찾을 수 없습니다."

#, c-format
#~ msgid "Rectangle's owner (%d) not found."
#~ msgstr "직사각형의 소유자 (%d) 를 찾을 수 없습니다."

#, c-format
#~ msgid "Sheet entry's owner (%d) not found."
#~ msgstr "시트 항목의 소유자 (%d) 를 찾을 수 없습니다."

#, c-format
#~ msgid "Sheetname's owner (%d) not found."
#~ msgstr "시트 이름의 소유자 (%d) 를 찾을 수 없습니다."

#, c-format
#~ msgid "Filename's owner (%d) not found."
#~ msgstr "파일 이름의 소유자 (%d) 를 찾을 수 없습니다."

#, c-format
#~ msgid "Designator's owner (%d) not found."
#~ msgstr "지정자의 소유자 (%d) 를 찾을 수 없습니다."

#, c-format
#~ msgid "Implementation's owner (%d) not found."
#~ msgstr "구현의 소유자 (%d) 를 찾을 수 없습니다."

#, c-format
#~ msgid "Footprint's owner (%d) not found."
#~ msgstr "풋프린트의 소유자 (%d) 를 찾을 수 없습니다."

#~ msgid "Lines drawn horizontally and vertically"
#~ msgstr "수평과 수직으로 선그리기"

#~ msgid "Lines drawn horizontally, vertically, and at a 45 degree angle"
#~ msgstr "수평, 수직, 45도 각도로만 도선 그리기"

#~ msgid "Separate sense pin"
#~ msgstr "분리된 감지 핀"

#~ msgid "3 terminals regulator"
#~ msgstr "3 단자 레귤레이터"

#~ msgid "Loss Tg"
#~ msgstr "손실 Tg"

#~ msgid "Loss Tg:"
#~ msgstr "탄젠트 손실:"

#~ msgid "Show pad <no net> indicator"
#~ msgstr "패드의 <네트 없음> 표시기 표시"

#~ msgid "No-Connects"
#~ msgstr "연결 없음"

#~ msgid "Show a marker on pads which have no net connected"
#~ msgstr "네트에 연결되지 않은 패드의 마커를 표시"

#, c-format
#~ msgid "Could not find library file %s."
#~ msgstr "라이브러리 파일 %s을(를) 찾을 수 없습니다."

#~ msgid "&Vias"
#~ msgstr "비아 (&V)"

#~ msgid "&Pads"
#~ msgstr "패드 (&P)"

#, c-format
#~ msgid "Through hole pad %s of %s"
#~ msgstr "%s의 %s에 대한 스루홀 패드"

#, c-format
#~ msgid "Through hole pad %s %s of %s"
#~ msgstr "관통 구멍 패드 %s %s의 %s"

#~ msgid "Net Tools"
#~ msgstr "인터넷 도구"

#~ msgid "Special Tools"
#~ msgstr "특수 도구"

#~ msgid "Highlight Selected Net"
#~ msgstr "선택한 네트 강조"

#~ msgid "Hide Net"
#~ msgstr "네트 숨기기"

#~ msgid "Hide the ratsnest for the selected net"
#~ msgstr "선택한 네트의 모든 연결선 숨김"

#~ msgid "Show the ratsnest for the selected net"
#~ msgstr "선택한 네트의 연결선 표시"

#~ msgid "Bus Aliases"
#~ msgstr "버스 별칭"

#~ msgid "Alias Name"
#~ msgstr "별칭 이름"

#~ msgid "Rename"
#~ msgstr "이름 변경"

#~ msgid "Alias Members"
#~ msgstr "별칭 멤버"

#~ msgid "Member Name"
#~ msgstr "멤버 이름"

#~ msgid "Bus Alias Name"
#~ msgstr "버스 별칭 이름"

#, c-format
#~ msgid ""
#~ "Error parsing spice code <%s>\n"
#~ "%s"
#~ msgstr ""
#~ "에러 파싱 스파이스 코드 <%s>\n"
#~ "%s"

#, c-format
#~ msgid ""
#~ "Error parsing param <%s>\n"
#~ "%s"
#~ msgstr ""
#~ "<%s> 매개변수 구문 분석 오류\n"
#~ "%s"

#, c-format
#~ msgid ""
#~ "Error parsing pin field <%s>\n"
#~ "%s"
#~ msgstr ""
#~ "에러 파싱 핀 필드 <%s>\n"
#~ "%s"

#~ msgid "Bus Definitions..."
#~ msgstr "버스 정의..."

#~ msgid "Manage bus definitions"
#~ msgstr "버스 정의 관리"

#~ msgid "Navigate to page"
#~ msgstr "페이지로 이동"

#~ msgid ""
#~ "Do not allow position of pad relative to parent footprint to be changed"
#~ msgstr "상위 풋프린트에 대응하는 패드의 위치 변경을 허용하지 않습니다"

#~ msgid "Environment Variable Help"
#~ msgstr "환경 변수 도움말"

#~ msgid "Filter Nets"
#~ msgstr "필터 네트"

#~ msgid "Net class filter:"
#~ msgstr "네트 클래스 필터 :"

#~ msgid "Apply Filters"
#~ msgstr "필터 적용"

#~ msgid "Assign Net Class"
#~ msgstr "네트 클래스 지정"

#~ msgid "New net class:"
#~ msgstr "새로운 네트 클래스:"

#~ msgid "Assign To All Listed Nets"
#~ msgstr "나열된 모든 네트에 할당"

#~ msgid "Assign To Selected Nets"
#~ msgstr "선택한 네트에 할당"

#, c-format
#~ msgid "Unknown Record id: %d."
#~ msgstr "알 수 없는 레코드 ID: %d."

#~ msgid "Floating point number with incorrect locale"
#~ msgstr "잘못된 로케일이 있는 부동 소수점 숫자"

#~ msgid "Missing floating point number"
#~ msgstr "부동 소수점 숫자 누락"

#~ msgid "Assign Netclass"
#~ msgstr "네트클래스 할당"

#~ msgid "Select netclass:"
#~ msgstr "네트클래스 선택:"

#~ msgid "Edit Symbol Name"
#~ msgstr "심볼 이름 편집"

#~ msgid "Auto-finish Track"
#~ msgstr "배선 자동 완료"

#~ msgid "Automatically finishes laying the current track."
#~ msgstr "현재 트랙의 배치를 자동으로 마칩니다."

#, c-format
#~ msgid "Net Class: %s"
#~ msgstr "네트 클래스: %s"

#, c-format
#~ msgid "Multiple symbols have identical reference IDs of '%s'."
#~ msgstr "다수의 심볼이 동일한 참조 ID '%s'을(를) 가지고 있습니다."

#, c-format
#~ msgid "Session file uses invalid layer id \"%s\""
#~ msgstr "세션 파일이 유효하지 않은 레이어 id '%s'을(를) 사용합니다"

#~ msgid "Max height"
#~ msgstr "최대 높이"

#~ msgid "percent of d"
#~ msgstr "d의 %"

#~ msgid "Max height/d"
#~ msgstr "최대 높이/d"

#~ msgid "percent of H/d"
#~ msgstr "H/d의 %"

#~ msgid "Not drilled pads"
#~ msgstr "드릴패드가 아님"

#~ msgid "Style for round shapes"
#~ msgstr "둥근 셰이프스타일"

#~ msgid "Style for rect shapes"
#~ msgstr "직사각형의 스타일"

#~ msgid "Style for tracks"
#~ msgstr "트랙 스타일"

#~ msgid "Allows use two tracks"
#~ msgstr "두 개의 트랙을 사용할 수 있음"

#~ msgid "Teardrop Settings"
#~ msgstr "티어드롭 설정"

#, c-format
#~ msgid "Net %s\tNetClass %s\tPadName %s"
#~ msgstr "네트 %s\t네트클래스 %s\t패드 이름 %s"

#~ msgid "Reformat passive symbol values"
#~ msgstr "수동 심볼 값 재 포맷"

#~ msgid "Reformat passive symbol values e.g. 1M -> 1Meg"
#~ msgstr "수동 심볼 값 재 포맷 예시: 1M -> 1Meg"

#~ msgid "Diode"
#~ msgstr "다이오드"

#~ msgid "BJT"
#~ msgstr "BJT"

#~ msgid "MOSFET"
#~ msgstr "MOSFET"

#~ msgid "JFET"
#~ msgstr "JFET"

#~ msgid "Subcircuit"
#~ msgstr "서브 회로"

#~ msgid "Code Model"
#~ msgstr "코드 모델"

#~ msgid ""
#~ "Symbol pin numbering don't always match the required SPICE pin order\n"
#~ "Check the symbol and use \"Alternate node sequence\" to reorder the pins, "
#~ "if necessary"
#~ msgstr ""
#~ "심볼 핀 번호는 요구하는 Spice 핀 순서와 항상 맞지 않습니다.\n"
#~ "필요하다면, 심볼을 확인하고 \"대체 노드 시퀀스\" 를 사용하여 핀을 재정렬하"
#~ "세요"

#~ msgid "For a Diode, pin order is anode, cathode"
#~ msgstr "다이오드에 대해서, 핀 순서는 애노드, 캐소드 순입니다"

#~ msgid ""
#~ "For a BJT, pin order is collector, base, emitter, substrate (optional)"
#~ msgstr ""
#~ "BJT에 대해서, 핀 순서는 컬렉터, 베이스, 이미터, 서브스트레이트 (선택사항) "
#~ "순입니다"

#~ msgid "For a MOSFET, pin order is drain, gate, source"
#~ msgstr "MOSFET에 대해서, 핀 순서는 드레인, 게이트, 소스 순입니다"

#~ msgid "For a JFET, pin order is drain, gate, source"
#~ msgstr "JFET에 대해서, 핀 순서는 드레인, 게이트, 소스 순입니다"

#~ msgid "Invalid Impedance value"
#~ msgstr "무효 임피던스 값"

#~ msgid "Invalid delay value"
#~ msgstr "잘못된 지연 값"

#~ msgid "Invalid frequency value"
#~ msgstr "잘못된 주파수 값"

#~ msgid "Invalid length in wavelength value"
#~ msgstr "파장 값의 유효하지 않은 길이"

#~ msgid "Invalid resistance value"
#~ msgstr "잘못된 저항 값"

#~ msgid "Invalid capacitance value"
#~ msgstr "잘못된 정전 용량 값"

#~ msgid "Invalid inductance value"
#~ msgstr "무효 인덕턴스 값"

#~ msgid "Invalid conductance value"
#~ msgstr "잘못된 컨덕턴스 값"

#~ msgid "Invalid length value"
#~ msgstr "잘못된 길이 값"

#, c-format
#~ msgid ""
#~ "You need to specify at least the first %d parameters for the transient "
#~ "source"
#~ msgstr "과도 소스에 대하여 최소한 앞의 %d개 매개변수를 지정해주어야 합니다"

#~ msgid ""
#~ "You cannot leave interleaved empty fields when defining a transient source"
#~ msgstr "과도 소스를 정의할 때 인터리브된 공백 필드를 남겨둘 수 없습니다"

#~ msgid "Select library"
#~ msgstr "라이브러리 선택"

#~ msgid "Offset:"
#~ msgstr "오프셋:"

#~ msgid "Standard deviation:"
#~ msgstr "표준 편차:"

#~ msgid "Mean:"
#~ msgstr "평균:"

#~ msgid "Lambda:"
#~ msgstr "람다:"

#~ msgid "type of random generator for source is invalid"
#~ msgstr "소스에 대한 난수 발생기의 형식이 유효하지 않습니다"

#~ msgid "Resistor"
#~ msgstr "저항"

#~ msgid "Capacitor"
#~ msgstr "커패시터"

#~ msgid "Inductor"
#~ msgstr "인덕터"

#~ msgid ""
#~ "In Spice values, the decimal separator is the point.\n"
#~ "Values can use Spice unit symbols."
#~ msgstr ""
#~ "Spice 값에서 소수점은 마침표 (.) 가 사용됩니다.\n"
#~ "해당 값은 Spice 유닛 심볼을 사용할 수 있습니다."

#~ msgid "Spice unit symbols in values (case insensitive):"
#~ msgstr "값에 대한 Spice 유닛 심볼 (대소문자 구분 없음):"

#~ msgid "Select file..."
#~ msgstr "파일 선택..."

#~ msgid "Note:"
#~ msgstr "참고:"

#~ msgid "note"
#~ msgstr "메모"

#~ msgid "DC:"
#~ msgstr "직류:"

#~ msgid "Volts/Amps"
#~ msgstr "V/A"

#~ msgid "AC magnitude:"
#~ msgstr "AC 진도:"

#~ msgid "radians"
#~ msgstr "라디안"

#~ msgid "Initial value:"
#~ msgstr "초기 값:"

#~ msgid "Delay time:"
#~ msgstr "지연 시간:"

#~ msgid "Rise time:"
#~ msgstr "상승 시간:"

#~ msgid "Pulse width:"
#~ msgstr "펄스 폭:"

#~ msgid "Pulse"
#~ msgstr "펄스"

#~ msgid "DC offset:"
#~ msgstr "DC 오프셋:"

#~ msgid "Damping factor:"
#~ msgstr "댐핑 팩터:"

#~ msgid "1/seconds"
#~ msgstr "1/sec"

#~ msgid "Sinusoidal"
#~ msgstr "사인 곡선"

#~ msgid "Rise delay time:"
#~ msgstr "상승 지연 시간:"

#~ msgid "Rise time constant:"
#~ msgstr "상승 시간 제한:"

#~ msgid "Fall delay time:"
#~ msgstr "하강 지연 시간:"

#~ msgid "Fall time constant:"
#~ msgstr "하강 시간 제한:"

#~ msgid "Exponential"
#~ msgstr "지수 함수"

#~ msgid "Piece-wise linear"
#~ msgstr "조각별 선형"

#~ msgid "Time:"
#~ msgstr "시간:"

#~ msgid "second"
#~ msgstr "초"

#~ msgid "Piece-wise Linear"
#~ msgstr "조각별 선형"

#~ msgid "Carrier frequency:"
#~ msgstr "캐리어 주파수:"

#~ msgid "Modulation index:"
#~ msgstr "변조 지수:"

#~ msgid "Carrier phase:"
#~ msgstr "캐리어 펄스:"

#~ msgid "degrees"
#~ msgstr "각도"

#~ msgid "Signal phase:"
#~ msgstr "신호 펄스:"

#~ msgid "FM"
#~ msgstr "FM"

#~ msgid "Modulating frequency:"
#~ msgstr "변조 주파수:"

#~ msgid "Signal delay:"
#~ msgstr "신호 지연:"

#~ msgid "AM"
#~ msgstr "AM"

#~ msgid "Uniform"
#~ msgstr "균일 분포"

#~ msgid "Gaussian"
#~ msgstr "가우시안"

#~ msgid "Poisson"
#~ msgstr "포아송"

#~ msgid "Individual value duration:"
#~ msgstr "개별 값 지속시간:"

#~ msgid "Time delay:"
#~ msgstr "시간 지연:"

#~ msgid "Random"
#~ msgstr "랜덤"

#~ msgid "External data"
#~ msgstr "외부 데이터"

#~ msgid "Source Type"
#~ msgstr "소스 유형"

#~ msgid "Propagation delay"
#~ msgstr "전파 지연"

#~ msgid "Length in wavelength"
#~ msgstr "파장 길이"

#~ msgid "Use time delay"
#~ msgstr "시간 지연 사용"

#~ msgid "Use frequency and number of wavelength"
#~ msgstr "사용 주파수 및 파장 수"

#~ msgid "Delay / Electrical length"
#~ msgstr "지연/전기적 길이"

#~ msgid "Lossless"
#~ msgstr "무손실"

#~ msgid "Resistance per unit length"
#~ msgstr "단위 길이당 저항"

#~ msgid "ohm / unit"
#~ msgstr "옴 / 단위"

#~ msgid "Inductance per unit length"
#~ msgstr "단위 길이당 인덕턴스"

#~ msgid "henry / unit"
#~ msgstr "헨리 / 단위"

#~ msgid "Capacitance per unit length"
#~ msgstr "단위 길이당 정전 용량"

#~ msgid "farad / unit"
#~ msgstr "패럿 / 단위"

#~ msgid "Conductance per unit length"
#~ msgstr "단위 길이당 컨덕턴스"

#~ msgid "siemens / unit"
#~ msgstr "지멘스 / 단위"

#~ msgid "Extra parameters"
#~ msgstr "추가 매개변수"

#~ msgid ""
#~ "The following types of lines have been implemented so far:\n"
#~ "\n"
#~ "- RLC\n"
#~ "- RC\n"
#~ "- LC\n"
#~ "- RG\n"
#~ "\n"
#~ "Any other combination will yield erroneous results and should not be "
#~ "tried."
#~ msgstr ""
#~ "지금까지 구현된 라인 유형은 다음과 같습니다:\n"
#~ "\n"
#~ "- RLC\n"
#~ "- RC\n"
#~ "- LC\n"
#~ "- RG\n"
#~ "\n"
#~ "다른 조합은 잘못된 결과를 생성하므로 시도해서는 안 됩니다."

#~ msgid "Lossy"
#~ msgstr "손실"

#~ msgid "Transmission Line"
#~ msgstr "전송선"

#~ msgid "Alternate node sequence:"
#~ msgstr "대체 노드 시퀀스:"

#~ msgid "GerbView"
#~ msgstr "거버뷰"

#~ msgid "Fomatting"
#~ msgstr "서식 지정"

#~ msgid "HatchBorder Lines"
#~ msgstr "해치 경계선"

#~ msgid "Image Editor"
#~ msgstr "이미지 편집기"

#~ msgid "The radius cannot be zero."
#~ msgstr "반경은 0이 될 수 없습니다."

#~ msgid "The arc angle cannot be zero."
#~ msgstr "호의 각도는 0이 될 수 없습니다."

#~ msgid "The rectangle cannot be empty."
#~ msgstr "직사각형은 비어있을 수 없습니다."

#~ msgid "File Open Error"
#~ msgstr "파일 열기 오류"

#~ msgid "Highlight the selected net"
#~ msgstr "선택한 네트 강조"

#~ msgid "Allowed features"
#~ msgstr "허용 기능"

#~ msgid "Allow blind/buried vias"
#~ msgstr "블라인드/베리드 비아 허용"

#~ msgid "Allow micro vias (uVias)"
#~ msgstr "마이크로 비아 (uVias) 허용"

#~ msgid "Show board setup"
#~ msgstr "기판 설정 표시"

#~ msgid ""
#~ "Blind/buried vias must first be enabled in Board Setup > Design Rules > "
#~ "Constraints."
#~ msgstr ""
#~ "기판 설정 > 디자인 규칙 > 제약 에서 블라인드/베리드 비아를 먼저 활성화하여"
#~ "야 합니다."

#~ msgid ""
#~ "Microvias must first be enabled in Board Setup > Design Rules > "
#~ "Constraints."
#~ msgstr ""
#~ "기판 설정 > 디자인 규칙 > 제약 에서 마이크로 비아를 먼저 활성화하여야 합니"
#~ "다."

#~ msgid "Scroll cross-probed items into view"
#~ msgstr "교차 조사 항목 표시로 스크롤"

#~ msgid "In1.Cu"
#~ msgstr "In1.Cu"

#~ msgid "In2.Cu"
#~ msgstr "In2.Cu"

#~ msgid "In3.Cu"
#~ msgstr "In3.Cu"

#~ msgid "In4.Cu"
#~ msgstr "In4.Cu"

#~ msgid "In5.Cu"
#~ msgstr "In5.Cu"

#~ msgid "In6.Cu"
#~ msgstr "In6.Cu"

#~ msgid "In7.Cu"
#~ msgstr "In7.Cu"

#~ msgid "In8.Cu"
#~ msgstr "In8.Cu"

#~ msgid "In9.Cu"
#~ msgstr "In9.Cu"

#~ msgid "In10.Cu"
#~ msgstr "In10.Cu"

#~ msgid "In11.Cu"
#~ msgstr "In11.Cu"

#~ msgid "In12.Cu"
#~ msgstr "In12.Cu"

#~ msgid "In13.Cu"
#~ msgstr "In13.Cu"

#~ msgid "In14.Cu"
#~ msgstr "In14.Cu"

#~ msgid "In15.Cu"
#~ msgstr "In15.Cu"

#~ msgid "In16.Cu"
#~ msgstr "In16.Cu"

#~ msgid "In17.Cu"
#~ msgstr "In17.Cu"

#~ msgid "In18.Cu"
#~ msgstr "In18.Cu"

#~ msgid "In19.Cu"
#~ msgstr "In19.Cu"

#~ msgid "In20.Cu"
#~ msgstr "In20.Cu"

#~ msgid "In21.Cu"
#~ msgstr "In21.Cu"

#~ msgid "In22.Cu"
#~ msgstr "In22.Cu"

#~ msgid "In23.Cu"
#~ msgstr "In23.Cu"

#~ msgid "In24.Cu"
#~ msgstr "In24.Cu"

#~ msgid "In25.Cu"
#~ msgstr "In25.Cu"

#~ msgid "In26.Cu"
#~ msgstr "In26.Cu"

#~ msgid "In27.Cu"
#~ msgstr "In27.Cu"

#~ msgid "In28.Cu"
#~ msgstr "In28.Cu"

#~ msgid "In29.Cu"
#~ msgstr "In29.Cu"

#~ msgid "In30.Cu"
#~ msgstr "In30.Cu"

#~ msgid "F.Adhesive"
#~ msgstr "F.Adhesive"

#~ msgid "B.Paste"
#~ msgstr "B.Paste"

#~ msgid "F.Paste"
#~ msgstr "F.Paste"

#~ msgid "Edge.Cuts"
#~ msgstr "Edge.Cuts"

#~ msgid "F.Courtyard"
#~ msgstr "F.Courtyard"

#~ msgid "B.Courtyard"
#~ msgstr "B.Courtyard"

#~ msgid "F.Fab"
#~ msgstr "F.Fab"

#~ msgid "B.Fab"
#~ msgstr "B.Fab"

#~ msgid "User.1"
#~ msgstr "사용자.1"

#~ msgid "User.2"
#~ msgstr "사용자.2"

#~ msgid "User.3"
#~ msgstr "사용자.3"

#~ msgid "User.4"
#~ msgstr "사용자.4"

#~ msgid "User.5"
#~ msgstr "사용자.5"

#~ msgid "User.6"
#~ msgstr "사용자.6"

#~ msgid "User.7"
#~ msgstr "사용자.7"

#~ msgid "User.8"
#~ msgstr "사용자.8"

#~ msgid "User.9"
#~ msgstr "사용자.9"

#, c-format
#~ msgid "Violations (%d)"
#~ msgstr "위반 (%d)"

#, c-format
#~ msgid "Ignored Tests (%d)"
#~ msgstr "무시된 테스트(%d)"

#, c-format
#~ msgid "Unit %c"
#~ msgstr "단위 %c"

#~ msgid "DPs evaluated:"
#~ msgstr "평가된 차동 쌍:"

#~ msgid "Keep hierarchy navigator open"
#~ msgstr "계층 탐색기 열기 유지"

#, fuzzy
#~ msgid ""
#~ "Lines drawn horizontally and vertically, with a 45 degree angle start"
#~ msgstr "작업을 시작점에서 수평, 수직 또는 45도로 제한합니다"

#, fuzzy
#~ msgid "Add Default"
#~ msgstr "기본값"

#~ msgid "Constrain outline to H, V and 45 degrees"
#~ msgstr "외곽선을 수평, 수직 또는 45도 각도로 제한"

#~ msgid "Constrain outline to H, V and 45 deg"
#~ msgstr "외곽선을 수평, 수직 또는 45도 각도로 제한"

#~ msgid "Draw the area using horizontal, vertical and 45 degree lines only"
#~ msgstr "이 영역에서는 수평, 수직, 45도 각도 선으로만 그리기"

#~ msgid "Add Layer Alignment Target"
#~ msgstr "레이어 정렬 타겟을 추가"

#~ msgid "Add a layer alignment target"
#~ msgstr "레이어 정렬 타겟을 추가"

#~ msgid "Draw selected text items as box"
#~ msgstr "선택된 텍스트 항목을 상자로 그리기"

#, c-format
#~ msgid "%s closed [pid=%d]\n"
#~ msgstr "%s 닫힘 [pid=%d]\n"

#, c-format
#~ msgid "%s %s opened [pid=%ld]\n"
#~ msgstr "%s %s 열림 [pid=%ld]\n"

#~ msgid "Checking mechanical clearances..."
#~ msgstr "기계식 클리어런스 확인..."

#, c-format
#~ msgid "The name '%s' conflicts with an existing entry in the library '%s'."
#~ msgstr "'%s'이라는 이름은 라이브러리의 기존 항목과 충돌합니다.[%s'."

#~ msgid "Hierarchical path: "
#~ msgstr "계층 경로: "

#, c-format
#~ msgid "Selecting all from sheet \"%s\""
#~ msgstr "시트 \"%s\"에서 모두 선택"

#, fuzzy
#~ msgid "Check zones..."
#~ msgstr "영역 확인 중..."

#, fuzzy
#~ msgid "Check items..."
#~ msgstr "핀 확인..."

#, fuzzy
#~ msgid "Items checked..."
#~ msgstr "항목이 잠겨 있습니다."

#, fuzzy
#~ msgid "Finished..."
#~ msgstr "찾기"

#~ msgid "Too large value for pad delta size."
#~ msgstr "패드 델타 크기에 대한 값이 너무 큽니다."

#~ msgid "Warning: Through hole pad has no hole."
#~ msgstr "경고: 스루홀 패드에는 홀이 없습니다."

#~ msgid "default"
#~ msgstr "기본값"

#, c-format
#~ msgid "Footprint %s zone connection: %s."
#~ msgstr "풋프린트 %s 영역 연결: %s."

#, c-format
#~ msgid "Expected \"SMD\" type but set to \"%s\""
#~ msgstr "\"SMD\" 형식을 예상하였으나 \"%s\"(으)로 설정되었습니다"

#, c-format
#~ msgid "Expected \"Other\" type but set to \"%s\""
#~ msgstr "\"기타\" 형식을 예상하였으나 \"%s\"(으)로 설정되었습니다"

#, c-format
#~ msgid "Minimum thermal spoke count: %d."
#~ msgstr "최소 단열 스포크 수: %d."

#~ msgid "Items are not connected.  No thermal spokes will be generated."
#~ msgstr "항목이 연결되지 않았습니다. 단열 스포크가 생성되지 않습니다."

#~ msgid "Mechanical"
#~ msgstr "기계적인"

#~ msgid "Reference designator hidden (it is required and can not be deleted)."
#~ msgstr "참조 지정자가 숨겨져 있습니다(필수이며 삭제할 수 없음)."

#~ msgid "Value hidden (it is required and can not be deleted)."
#~ msgstr "숨겨진 값 (필수이며 삭제할 수 없음)."

#, fuzzy
#~ msgid "Clean vias and tracks"
#~ msgstr "패드와 배선에 표시"

#, fuzzy
#~ msgid "Remove misconnected"
#~ msgstr "네트가 없습니다. (연결 안 됨)"

#, fuzzy
#~ msgid "Delete tracks in pads"
#~ msgstr "패드 내부의 배선 삭제"

#, fuzzy
#~ msgid "Merge segments"
#~ msgstr "세그먼트 결합:"

#~ msgid "Normal save as operation"
#~ msgstr "일반적인 저장 수행"

#~ msgid "Replace library table entry"
#~ msgstr "라이브러리 테이블 항목 대체"

#~ msgid "track width"
#~ msgstr "배선 두께"

#~ msgid "annular width"
#~ msgstr "환형 폭"

#~ msgid "via diameter"
#~ msgstr "비아 지름"

#~ msgid "constraint"
#~ msgstr "강제"

#~ msgid "Set line width to 0 to use Schematic Editor line widths."
#~ msgstr "회로도 편집기 선 너비를 사용하려면 너비를 0으로 설정합니다."

#~ msgid "Set line color to transparent to use Schematic Editor colors."
#~ msgstr "회로도 편집기 색상을 사용하도록 선 색상을 투명하게 설정합니다."

#~ msgid "Constrain buses and wires to H or V"
#~ msgstr "버스와 와이어를 수평 또는 수직 방향으로 제한"

#~ msgid "Switch H & V only mode for new wires and buses"
#~ msgstr "새 전선 및 버스에 대한 H & V 전용 모드 전환"

#~ msgid "Plot the contents of the PCB edge layer on all layers"
#~ msgstr "PCB 에지 레이어의 내용물을 모든 레이어에 그림으로 표시"

#~ msgid "Synchronized pins edit mode, and this pin is new"
#~ msgstr "동기화된 핀 편집 모드이며, 이 핀은 새로운 핀입니다"

#~ msgid ""
#~ "Similar pins will be automatically added to other units, if this pin is "
#~ "not common to all units"
#~ msgstr ""
#~ "모든 유닛에 대해 핀이 공통적으로 사용되지 않을 경우, 비슷한 핀은 자동으로 "
#~ "다른 유닛에 추가됩니다"

#~ msgid "Synchronized pins edit mode"
#~ msgstr "동기화된 핀 편집 모드"

#~ msgid ""
#~ "Similar pins at the same location will be edited. Pin number of other "
#~ "pins will be not modified"
#~ msgstr ""
#~ "같은 경로의 비슷한 핀이 편집됩니다. 다른 핀의 핀 번호는 수정되지 않습니다"

#~ msgid "info"
#~ msgstr "정보"

#, c-format
#~ msgid "(pad \"%s\")"
#~ msgstr "(패드\"%s\")"

#~ msgid "Bl/Buried vias"
#~ msgstr "Bl/Buried 비아"

#, c-format
#~ msgid ""
#~ "The project library table '%s' does not exist or cannot be read.  This "
#~ "may result in broken symbol links for the schematic.  Do you wish to "
#~ "continue?"
#~ msgstr ""
#~ "프로젝트 라이브러리 테이블 '%s'은(는) 존재하지 않거나 읽을 수 없습니다.  "
#~ "이는 회로도의 심볼 링크를 손상시킵니다.  계속하시겠습니까?"

#~ msgid ""
#~ "Warning: Pad drill will leave no copper or drill shape and pad shape do "
#~ "not overlap."
#~ msgstr ""
#~ "경고: 패드 드릴은 구리를 남기지 않거나, 드릴 형상과 패드 형상이 겹치지 않"
#~ "아야 합니다."

#~ msgid "No netlist provided, skipping schematic parity tests."
#~ msgstr "넷리스트가 제공되지 않아 회로도 패리티 테스트를 건너뜁니다."

#, c-format
#~ msgid "Testing %d silkscreen features against %d board items."
#~ msgstr "%d개의 실크스크린 기능을 %d개의 기판 개체에 대해 테스트 중입니다."

#~ msgid "H align:"
#~ msgstr "수평 정렬:"

#~ msgid "V align:"
#~ msgstr "수직 정렬:"

#~ msgid "Via Drill"
#~ msgstr "비아 드릴"

#~ msgid "uVia Drill"
#~ msgstr "마이크로 비아 드릴"

#~ msgid "Via drill size must be smaller than via diameter"
#~ msgstr "비아 드릴 크기는 비아 직경보다 작아야 합니다"

#~ msgid "Via drill:"
#~ msgstr "비아 드릴:"

#~ msgid "Track Width and Via Size"
#~ msgstr "배선 너비 및 비아 크기"

#~ msgid "Copper zone net has no pads"
#~ msgstr "구리 영역 네트에는 패드가 없음"

#~ msgid "Drill"
#~ msgstr "드릴"

#, c-format
#~ msgid "Via %s, drill %s"
#~ msgstr "비아%s, 드릴%s"

#~ msgid "Zone has no connections."
#~ msgstr "영역에 연결이 없습니다."

#~ msgid "TransLine "
#~ msgstr "전송선 "

#~ msgid "Refill zones after Zone Properties dialog"
#~ msgstr "영역 속성 대화창을 닫은 후 영역 다시 채우기"

#, c-format
#~ msgid ""
#~ "Polygon found on an Altium layer (%d) with no KiCad equivalent. It has "
#~ "been moved to KiCad layer Eco1_User."
#~ msgstr ""
#~ "Altium 레이어 (%d) 에서 KiCad에 대응되지 않는 다각형을 발견하였습니다. "
#~ "KiCad 레이어 Eco1_User로 이동되었습니다."

#~ msgid "Performing polygon fills..."
#~ msgstr "다각형 채우기 수행중..."

#~ msgid "Mimic legacy behavior"
#~ msgstr "이전의 동작을 모방"

#~ msgid ""
#~ "Produces a slightly smoother outline at the expense of performance, some "
#~ "export fidelity issues, and overly aggressive higher-priority zone "
#~ "knockouts."
#~ msgstr ""
#~ "성능, 일부 내보내기 충실도 이슈, 지나치게 위협적인 고우선도 영역의 녹아웃"
#~ "을 희생하여 조금 더 매끄러운 외곽선을 생성합니다."

#~ msgid "Smoothed polygons (best performance)"
#~ msgstr "부드러운 다각형 (최대 성능)"

#~ msgid ""
#~ "Better performance, exact export fidelity, and more complete filling near "
#~ "higher-priority zones."
#~ msgstr ""
#~ "성능을 향상시키고, 완벽한 내보내기 충실도와 고우선도 영역 주위에서의 더욱 "
#~ "완벽한 채우기를 보입니다."

#~ msgid "Units are not interchangeable"
#~ msgstr "유닛은 교환 불가"

#~ msgid ""
#~ "Check this option to allow symbols with multiple units to have different\n"
#~ "elements.  Uncheck this option when all symbol units are identical "
#~ "except\n"
#~ "for pin numbers."
#~ msgstr ""
#~ "여러 유닛의 심볼들이 다른 요소를 가지도록 하려면 이 옵션을 선택하십시오.\n"
#~ "모든 심볼 유닛이 핀 번호를 제외하고 동일할 경우,\n"
#~ "이 옵션을 선택 취소하십시오."

#~ msgid "Net Class Flag"
#~ msgstr "네트 클래스 플래그"

#~ msgid "ERC completed.<br><br>"
#~ msgstr "ERC가 완료되었습니다.<br><br>"

#~ msgid "Violations"
#~ msgstr "위반"

#~ msgid "Delete Markers"
#~ msgstr "마커 삭제"

#~ msgid "Net Class Flag Properties"
#~ msgstr "네트 클래스 플래그 속성"

#~ msgid "Change to Net Class Flag"
#~ msgstr "네트 클래스 플래그로 변경"

#~ msgid "Change existing item to a net class flag"
#~ msgstr "기존 항목을 네트 클래스 플래그로 변경"

#~ msgid "Highlight on PCB"
#~ msgstr "PCB에 강조"

#~ msgid "Loading Gerber files..."
#~ msgstr "Gerber 파일 불러오는 중..."

#~ msgid ""
#~ "Open Gerber plot file(s) on the current layer. Previous data will be "
#~ "deleted"
#~ msgstr "현재 레이어에 거버 플롯 파일을 엽니다. 이전 데이터는 삭제됩니다"

#~ msgid ""
#~ "Open Excellon drill file(s) on the current layer. Previous data will be "
#~ "deleted"
#~ msgstr "현재 레이어에 Excellon 드릴 파일을 엽니다. 이전 데이터는 사라집니다"

#~ msgid "DRC Control"
#~ msgstr "DRC 제어"

#~ msgid ""
#~ "The units that are used for a SVG user units.\n"
#~ "Choose Millimeter when you are not sure."
#~ msgstr ""
#~ "SVG 사용자 단위에 대해 사용되는 단위입니다.\n"
#~ "무엇인지 모르겠다면, 밀리미터를 선택하세요."

#, c-format
#~ msgid ""
#~ "Arc keepout found on an Altium layer (%d) with no KiCad equivalent. It "
#~ "has been moved to KiCad layer Eco1_User."
#~ msgstr ""
#~ "Altium 레이어 (%d) 에서 KiCad에 대응되지 않는 호 킵아웃을 발견하였습니다. "
#~ "KiCad 레이어 Eco1_User로 이동되었습니다."

#, c-format
#~ msgid ""
#~ "Track keepout found on an Altium layer (%d) with no KiCad equivalent. It "
#~ "has been moved to KiCad layer Eco1_User."
#~ msgstr ""
#~ "Altium 레이어 (%d) 에서 KiCad에 대응되지 않는 배선 킵아웃을 발견하였습니"
#~ "다. KiCad 레이어 Eco1_User로 이동되었습니다."

#, c-format
#~ msgid ""
#~ "Track found on an Altium layer (%d) with no KiCad equivalent. It has been "
#~ "moved to KiCad layer Eco1_User."
#~ msgstr ""
#~ "Altium 레이어 (%d) 에서 KiCad에 대응되지 않는 배선이 발견됨. KiCad 레이어 "
#~ "Eco1_User로 이동되었습니다."

#, c-format
#~ msgid ""
#~ "Text found on an Altium layer (%d) with no KiCad equivalent. It has been "
#~ "moved to KiCad layer Eco1_User."
#~ msgstr ""
#~ "Altium 레이어 (%d) 에서 KiCad에 대응되지 않는 텍스트를 발견하였습니다. "
#~ "KiCad 레이어 Eco1_User로 이동되었습니다."

#, c-format
#~ msgid ""
#~ "Fill found on an Altium layer (%d) with no KiCad equivalent. It has been "
#~ "moved to KiCad layer Eco1_User."
#~ msgstr ""
#~ "Altium 레이어 (%d) 에서 KiCad에 대응되지 않는 채움을 발견하였습니다. "
#~ "KiCad 레이어 Eco1_User로 이동되었습니다."

#~ msgid "Random direction factor of the cast rays"
#~ msgstr "투사 광선의 임의 방향 계수"

#~ msgid "sq. mm"
#~ msgstr "sq. mm"

#~ msgid "cu. mm"
#~ msgstr "cu. mm"

#~ msgid "sq. mils"
#~ msgstr "sq. mils"

#~ msgid "cu. mils"
#~ msgstr "cu. mils"

#~ msgid "sq. in"
#~ msgstr "sq. in"

#~ msgid "cu. in"
#~ msgstr "cu. in"

#~ msgid "the translation for paper size must preserve original spellings"
#~ msgstr "용지 크기에 대한 번역은 원래 철자를 보존해야 합니다"

#~ msgid "Sheet background color:"
#~ msgstr "시트 배경색:"

#~ msgid "Label requires non-empty text."
#~ msgstr "라벨에는 비어 있지 않은 텍스트가 필요합니다."

#~ msgid "Text Size:"
#~ msgstr "텍스트 크기:"

#~ msgid "Bold and italic"
#~ msgstr "굵기와 기울임"

#~ msgid "Save changes to schematic before closing?"
#~ msgstr "회로도를 닫기 전에 변경 내용을 저장 하겠습니까?"

#~ msgid "Pending install"
#~ msgstr "설치 보류 중"

#~ msgid "Pending uninstall"
#~ msgstr "제거 보류 중"

#~ msgid "Mirror text"
#~ msgstr "텍스트 반전"

#~ msgid "Justification:"
#~ msgstr "위치 맞춤:"

#~ msgid "Footprint can be freely moved and oriented on the canvas."
#~ msgstr ""
#~ "풋프린트는 캔버스상에서 자유롭게 움직이거나 방향을 바꿀 수 있습니다."

#~ msgid "Unlock footprint"
#~ msgstr "풋프린트 잠금 해제"

#~ msgid "Allow 90 degree rotated placement:"
#~ msgstr "90도 회전 배치 허용:"

#~ msgid "Allow 180 degree rotated placement:"
#~ msgstr "180도 회전 배치 허용:"

#~ msgid "Layers setup"
#~ msgstr "레이어 설정"

#~ msgid "Custom pad shape in zone:"
#~ msgstr "영역에서의 사용자 정의 패드 형상:"

#~ msgid "Use pad shape"
#~ msgstr "패드 모양 사용"

#~ msgid "Checking silkscreen for potential soldermask clipping..."
#~ msgstr "실크스크린이 솔더 마스크를 자를 가능성에 대해 확인 중..."

#, c-format
#~ msgid "Testing %d mask apertures against %d silkscreen features."
#~ msgstr ""
#~ "%d개의 마스크 개구부를 %d개의 실크스크린 기능에 대하여 테스트 중입니다."

#~ msgid "Items share no relevant layers:"
#~ msgstr "관련 계층을 공유하지 않는 개체:"

#~ msgid "Draw a leader"
#~ msgstr "지시선 그리기"

#~ msgid "Others"
#~ msgstr "기타"

#~ msgid ""
#~ "KiCad can use your graphics card to give you a smoother and faster "
#~ "experience. This option is turned off by default since it is not "
#~ "compatible with all computers.\n"
#~ "\n"
#~ "Would you like to try enabling graphics acceleration?\n"
#~ "\n"
#~ "If you'd like to choose later, select Accelerated Graphics in the "
#~ "Preferences menu."
#~ msgstr ""
#~ "KiCad는 그래픽 카드를 사용하여 더 부드럽고 빠른 환경을 제공할 수 있습니"
#~ "다. 이 옵션은 모든 컴퓨터와 호환되지 않으므로 기본적으로 꺼져 있습니다.\n"
#~ "\n"
#~ "그래픽 가속을 활성화해 보시겠습니까?\n"
#~ "\n"
#~ "나중에 선택하려면 기본 설정 메뉴에서 가속 그래픽을 선택합니다."

#~ msgid "Enable Graphics Acceleration"
#~ msgstr "그래픽 가속 활성화"

#~ msgid "&Enable Acceleration"
#~ msgstr "가속 활성화 (&E)"

#~ msgid "&No Thanks"
#~ msgstr "괜찮습니다 (&N)"

#~ msgid "Notes"
#~ msgstr "메모"

#~ msgid "Sheet name"
#~ msgstr "시트 이름"

#~ msgid "Sheet file"
#~ msgstr "시트 파일"

#, c-format
#~ msgid ""
#~ "Cannot print '%s'.\n"
#~ "\n"
#~ "Unknown file type."
#~ msgstr ""
#~ "'%s'을(를) 인쇄할 수 없습니다.\n"
#~ "\n"
#~ "알 수 없는 파일 형식입니다."

#~ msgid "Discard changes"
#~ msgstr "변경 사항 취소"

#~ msgid "All downloads finished"
#~ msgstr "모든 다운로드가 완료됨"

#, c-format
#~ msgid "License: %s\n"
#~ msgstr "라이센스: %s\n"

#~ msgid "Pick a package on the left panel to view it's description."
#~ msgstr "패키지를 왼쪽 패널로 선택하여 설명을 확인하세요."

#~ msgid "Dl Size"
#~ msgstr "DL 크기"

#~ msgid "Comp"
#~ msgstr "회사"

#~ msgid "Versions"
#~ msgstr "버전"

#~ msgid "Print the contents of the file"
#~ msgstr "파일 내용 인쇄"

#, c-format
#~ msgid "Min Width: %s"
#~ msgstr "최소 너비: %s"

#~ msgid ""
#~ "Zdiff =\n"
#~ "2*Z0( (1 - 0.48exp( -0.96*S/H ) )"
#~ msgstr ""
#~ "Zdiff =\n"
#~ "2*Z0( (1 - 0.48exp( -0.96*S/H ) )"

#~ msgid "Zcommon = Zeven / 2"
#~ msgstr "Zcommon = Zeven / 2"

#, c-format
#~ msgid "Field name \"%s\" already in use."
#~ msgstr "\"%s\" 필드 이름이 이미 사용 중입니다."

#~ msgid "Add new pins for alternate body style (DeMorgan) to symbol?"
#~ msgstr ""
#~ "심볼에 대체 바디 스타일 (드 모르간) 에 대한 새 핀을 추가하시겠습니까?"

#~ msgid "PI"
#~ msgstr "π"

#~ msgid ""
#~ "Show or hide the track and via clearance area. If \"New track\" is "
#~ "selected, track clearance area is shown only when creating the track."
#~ msgstr ""
#~ "배선과 비아 클리어런스 영역을 표시하거나 숨깁니다. \"새로운 배선\" 이 선택"
#~ "될 경우, 배선 클리어런스 영역은 배선이 생성될 때만 보여집니다."

#~ msgid "<invalid>"
#~ msgstr "<잘못됨>"

#~ msgid "Ref."
#~ msgstr "레퍼런스"

#, c-format
#~ msgid "Through hole pad of %s"
#~ msgstr "%s의 스루홀 패드"

#~ msgid "Footprint text front"
#~ msgstr "전면의 풋프린트 텍스트"

#~ msgid "Footprint text back"
#~ msgstr "후면의 풋프린트 텍스트"

#~ msgid ""
#~ "### Bridged Tee Attenuator\n"
#~ "__Zin__ desired input impedance in &#x2126;<br>\n"
#~ "__Zout__ desired output impedance<br>\n"
#~ "__Z<sub>0</sub> = Zin = Zout__<br><br>\n"
#~ "\n"
#~ "* __a__ attenuation in dB\n"
#~ "* __L = 10<sup>a/20</sup>__ (the loss)<br><br>\n"
#~ "* ___R1 = Z<sub>0</sub> \\* (L - 1)___\n"
#~ "* ___R2 = Z<sub>0</sub> / (L - 1)___"
#~ msgstr ""
#~ "### 브릿지 T형 감쇠기\n"
#~ "__Zin__ 입력 임피던스 기대값 in &#x2126;<br>\n"
#~ "__Zout__ 출력 임피던스 기대값<br>\n"
#~ "__Z<sub>0</sub> = Zin = Zout__<br><br>\n"
#~ "\n"
#~ "* __a__ 감쇠량 (dB)\n"
#~ "* __L = 10<sup>a/20</sup>__ (손실)<br><br>\n"
#~ "* ___R1 = Z<sub>0</sub> \\* (L - 1)___\n"
#~ "* ___R2 = Z<sub>0</sub> / (L - 1)___"

#~ msgid ""
#~ "### PI Attenuator\n"
#~ "__Zin__ desired input impedance in &#x2126;<br>\n"
#~ "__Zout__ desired output impedance<br>\n"
#~ "__Zin = Zout__<br><br>\n"
#~ "\n"
#~ "* __a__ attenuation in dB\n"
#~ "* __L = 10<sup>a/20</sup>__ (the loss)\n"
#~ "* __A = (L + 1) / (L - 1)__<br><br>\n"
#~ "* ___R2 = (L- 1) / 2 \\* &radic; ( (Zin \\* Zout) / L)___\n"
#~ "* ___R1 = 1 / (A / Zin - 1 / R2)___\n"
#~ "* ___R3 = 1 / (A / Zout - 1 / R2)___"
#~ msgstr ""
#~ "### π형 감쇠기\n"
#~ "__Zin__ 입력 임피던스 기대값 in &#x2126;<br>\n"
#~ "__Zout__ 출력 임피던스 기대값<br>\n"
#~ "__Zin = Zout__<br><br>\n"
#~ "\n"
#~ "* __a__ 감쇠량 (dB)\n"
#~ "* __L = 10<sup>a/20</sup>__ (손실)\n"
#~ "* __A = (L + 1) / (L - 1)__<br><br>\n"
#~ "* ___R2 = (L- 1) / 2 \\* &radic; ( (Zin \\* Zout) / L)___\n"
#~ "* ___R1 = 1 / (A / Zin - 1 / R2)___\n"
#~ "* ___R3 = 1 / (A / Zout - 1 / R2)___"

#~ msgid "Mouse drag behavior:"
#~ msgstr "마우스 끌기 동작:"

#~ msgid "Interactive drag"
#~ msgstr "인터랙티브 드래그"

#~ msgid "Toggle 45 Limit"
#~ msgstr "토글 45도 제한"

#~ msgid "OpenGL"
#~ msgstr "OpenGL"

#~ msgid "Footprint R1 (300K), back side (mirrored), rotated 180.0º"
#~ msgstr "풋프린트 R1 (300K), 후면 (미러링됨), 180.0º 회전"

#~ msgid "PolyLine"
#~ msgstr "폴리선"

#~ msgid "Arcs in symbols cannot exceed 180 degrees."
#~ msgstr "심볼의 호 각도는 180도를 넘어갈 수 없습니다."

#~ msgid "Error: illegal or empty filename."
#~ msgstr "오류: 파일 이름이 잘못되었거나 비어 있습니다."

#, c-format
#~ msgid ""
#~ "The CADSTAR template '%s' has thermal reliefs in the original design but "
#~ "there is no KiCad equivalent to the original CADSTAR settings. Solid fill "
#~ "has been applied instead. When the template is re-filled the thermal "
#~ "reliefs will be removed."
#~ msgstr ""
#~ "CADSTAR 템플릿 '%s' 의 원본 디자인에는 단열판이 존재하나, KiCad는 원본 "
#~ "CADSTAR 설정에 대응되지 않습니다. 패드의 설정이 공통 설정으로 반영됩니다. "
#~ "대신 솔리드 채우기가 적용됩니다. 템플릿이 다시 채워지면 단열판은 제거됩니"
#~ "다."

#~ msgid "Drawing sheet file"
#~ msgstr "도면 시트 파일"

#~ msgid "Browse..."
#~ msgstr "찾아보기..."

#~ msgid ""
#~ "Left click (and drag) actions depend on 3 modifier keys:\n"
#~ "Alt, Shift and Ctrl"
#~ msgstr ""
#~ "좌클릭 (및 끌기) 동작은 3개의 수정자 키에 따라 달라집니다.\n"
#~ "Alt, Shift 및 Ctrl입니다."

#~ msgid "Toggle selected state of item(s)."
#~ msgstr "선택한 항목 상태를 전환합니다."

#~ msgid "Alt+Shift"
#~ msgstr "Alt+Shift"

#~ msgid ""
#~ "Left click (and drag) actions depend on 3 modifier keys:\n"
#~ "Alt, Shift and Cmd"
#~ msgstr ""
#~ "좌클릭 (및 끌기) 동작은 3개의 수정자 키에 따라 달라집니다.\n"
#~ "Alt, Shift 및 Cmd"

#~ msgid "Cmd+Shift"
#~ msgstr "Cmd+Shift"

#~ msgid "Nodes"
#~ msgstr "노드"

#~ msgid "Graphic Shape"
#~ msgstr "그래픽 모양"

#~ msgid "Board Text"
#~ msgstr "보드 텍스트"

#~ msgid "Board Marker"
#~ msgstr "보드 마카"

#~ msgid "Aligned Dimension"
#~ msgstr "정렬된 치수"

#~ msgid "Orthogonal Dimension"
#~ msgstr "직교 치수"

#~ msgid "Center Dimension"
#~ msgstr "중심 치수"

#~ msgid "Schematic Marker"
#~ msgstr "회로도 마커"

#~ msgid "Schematic Text"
#~ msgstr "회로도 텍스트"

#~ msgid "Schematic Field"
#~ msgstr "회로도 필드"

#~ msgid "Symbol Text"
#~ msgstr "심볼 텍스트"

#~ msgid "Validate"
#~ msgstr "검증"

#, c-format
#~ msgid "Remove single pad net %s."
#~ msgstr "단일 패드 네트 %s을(를) 제거합니다."

#, c-format
#~ msgid "Removed single pad net %s."
#~ msgstr "단일 패드 네트 %s을(를) 제거하였습니다."

#~ msgid "Change to isometric perspective"
#~ msgstr "등각 투시로 변경"

#~ msgid "Days"
#~ msgstr "일"

#~ msgid "No editor defined in KiCad. Please choose it."
#~ msgstr "KiCad에 편집기가 지정되어 있지 않습니다. 선택해 주세요."

#~ msgid "No editor defined. Please select one."
#~ msgstr "편집기가 정의되지 않았습니다. 선택해 주세요."

#~ msgid "Delete nets containing only a single pad"
#~ msgstr "한 개의 패드만을 포함한 네트 삭제"

#~ msgid "Generate warnings for pads with no net"
#~ msgstr "네트가 없는 패드에 대하여 경고 생성"

#~ msgid ""
#~ "Display a warning if a pad in a footprint does not appear in netlist.\n"
#~ "Only pads on a copper layer and having a name are tested."
#~ msgstr ""
#~ "풋프린트에 존재하는 패드가 네트리스트에 보이지 않을 때 경고를 표시합니"
#~ "다.\n"
#~ "구리 레이어에 존재하고 이름을 가진 패드만 테스트됩니다."

#~ msgid ""
#~ "Clear the net name of pads when there is only one pad belonging to this "
#~ "net."
#~ msgstr "이 네트에 속하는 패드가 단 한 개일 때, 패드의 네트 이름을 지웁니다."

#~ msgid "Automatically zoom to fit"
#~ msgstr "화면에 맞게 자동으로 확대/축소"

#~ msgid "Zoom to fit when changing footprint"
#~ msgstr "풋프린트 수정 중에 화면에 맞게 채우기"

#~ msgid "Zdiff = Zodd * 2"
#~ msgstr "Zdiff = Zodd * 2"

#~ msgid "Shift+Alt"
#~ msgstr "Shift+Alt"

#~ msgid "Alt+Cmd"
#~ msgstr "Alt+Cmd"

#~ msgid "Info"
#~ msgstr "정보"

#~ msgid "Show Clarify Selection Menu"
#~ msgstr "선택 항목 지우기 메뉴 표시"

#~ msgid "Ignore H/V/45 Constraints"
#~ msgstr "H/V/45 제약 조건 무시"

#~ msgid "Do not forget to choose a title for this netlist control page"
#~ msgstr "이 네트리스트 제어 페이지의 제목을 선택하는 것을 잊지 마십시오"

#, c-format
#~ msgid "Schematic file '%s' is already open."
#~ msgstr "회로도 파일 '%s'은(는) 이미 열려 있습니다."

#~ msgid "L&imit graphic lines to H, V and 45 degrees"
#~ msgstr "그래픽 선의 각도를 수평, 수직, 45도로 제한 (&i)"

#~ msgid "Limit Lines to 45 deg"
#~ msgstr "선을 45도 각도로 제한"

#~ msgid "Limit graphic lines to H, V and 45 degrees"
#~ msgstr "그래픽 라인을 H, V 및 45도로 제한"

#~ msgid "Show 3D through hole models"
#~ msgstr "3D 스루홀 모델 표시"

#~ msgid "Show 3D virtual models"
#~ msgstr "3D 가상 모델 표시"

#~ msgid "There are no unreferenced pins in this sheet to remove."
#~ msgstr "이 시트에는 삭제할 참조되지 않은 핀이 존재하지 않습니다."

#, c-format
#~ msgid "Custom (%s)"
#~ msgstr "사용자 정의 (%s)"

#~ msgid "STEP files (*.stp;*.step)|*.stp;*.step"
#~ msgstr "STEP 파일 (*.stp;*.step)|*.stp;*.step"

#~ msgid "If you want a courtyard layer for the front side of the board"
#~ msgstr "기판의 전면에 코트야드 레이어를 사용하고 싶은 경우"

#~ msgid "If you want a courtyard layer for the back side of the board"
#~ msgstr "기판의 후면에 코트야드 레이어를 사용하고 싶은 경우"

#~ msgid "If you want a board perimeter layer"
#~ msgstr "기판 경계 레이어를 사용하고 싶은 경우"

#~ msgid "All Files (*.*)|*.*"
#~ msgstr "모든 파일 (*.*)|*.*"

#~ msgid "Executable file (*.exe)|*.exe"
#~ msgstr "실행 파일 (*.exe)|*.exe"

#~ msgid "Executable file (*)|*"
#~ msgstr "실행 파일 (*)|*"

#~ msgid "Top layer (*.GTL)|*.GTL;*.gtl|"
#~ msgstr "상단 레이어 (*.GTL)|*.GTL;*.gtl|"

#~ msgid "Bottom layer (*.GBL)|*.GBL;*.gbl|"
#~ msgstr "하단 레이어 (*.GBL)|*.GBL;*.gbl|"

#~ msgid "Bottom solder resist (*.GBS)|*.GBS;*.gbs|"
#~ msgstr "하단 솔더 레지스트 (*.GBS)|*.GBS;*.gbs|"

#~ msgid "Top solder resist (*.GTS)|*.GTS;*.gts|"
#~ msgstr "상단 솔더 레지스트 (*.GTS)|*.GTS;*.gts|"

#~ msgid "Bottom overlay (*.GBO)|*.GBO;*.gbo|"
#~ msgstr "하단 오버레이 (*.GBO)|*.GBO;*.gbo|"

#~ msgid "Top overlay (*.GTO)|*.GTO;*.gto|"
#~ msgstr "상단 오버레이 (*.GBO)|*.GBO;*.gbo|"

#~ msgid "Bottom paste (*.GBP)|*.GBP;*.gbp|"
#~ msgstr "하단 페이스트 (*.GBP)|*.GBP;*.gbp|"

#~ msgid "Top paste (*.GTP)|*.GTP;*.gtp|"
#~ msgstr "상단 페이스트 (*.GTP)|*.GTP;*.gtp|"

#~ msgid "Keep-out layer (*.GKO)|*.GKO;*.gko|"
#~ msgstr "킵아웃 레이어 (*.GKO)|*.GKO;*.gko|"

#~ msgid "Mechanical layers (*.GMx)|*.GM1;*.gm1;*.GM2;*.gm2;*.GM3;*.gm3|"
#~ msgstr "메카니컬 레이어 (*.GMx)|*.GM1;*.gm1;*.GM2;*.gm2;*.GM3;*.gm3|"

#~ msgid "Top Pad Master (*.GPT)|*.GPT;*.gpt|"
#~ msgstr "상단 패드 마스터 (*.GPT)|*.GPT;*.gpt|"

#~ msgid "Bottom Pad Master (*.GPB)|*.GPB;*.gpb|"
#~ msgstr "하단 패드 마스터 (*.GPB)|*.GPB;*.gpb|"

#~ msgid "Background bottom:"
#~ msgstr "배경색 하단:"

#~ msgid "Load Colors from Board Stackup"
#~ msgstr "기판 스택업에서 색상 불러오기"

#~ msgid "Doc Files"
#~ msgstr "문서 파일"

#, c-format
#~ msgid "Doc File '%s' not found"
#~ msgstr "문서 파일 '%s'을(를) 찾을 수 없음"

#~ msgid "Text Editor"
#~ msgstr "텍스트 에디터"

#~ msgid "Error. You must provide a Title"
#~ msgstr "오류: 제목을 입력해야 합니다"

#, c-format
#~ msgid "Setting schematic symbol '%s %s' library identifier to '%s'. "
#~ msgstr "회로도 심볼 '%s %s' 라이브러리 식별자를 '%s'(으)로 설정했습니다. "

#, c-format
#~ msgid "File \"%s\" not found"
#~ msgstr "파일 \"%s\"을 찾을 수 없음"

#~ msgid "Bad or missing parameters!"
#~ msgstr "매개변수가 잘못되었거나 누락되었습니다!"

#~ msgid "Available materials:"
#~ msgstr "사용 가능한 재료:"

#~ msgid "Dielectric Materials"
#~ msgstr "유전체"

#~ msgid "HatchBorder pattern"
#~ msgstr "해치 외곽선 패턴"

#~ msgid "Smooth amount:"
#~ msgstr "매끄러움 강도:"

#~ msgid "Error: Corner size not a number."
#~ msgstr "오류: 모서리 크기가 숫자가 아닙니다."

#, c-format
#~ msgid "Checking %s; silk clearance: %s."
#~ msgstr "%s 확인 중; 실크 클리어런스: %s."

#, c-format
#~ msgid "Checking %s; edge clearance: %s."
#~ msgstr "%s 확인 중; 가장자리 클리어런스: %s."

#~ msgid "Read descr shape file"
#~ msgstr "모양 파일 설명 읽기"

#, c-format
#~ msgid "Overridden by %s; connection type: %s."
#~ msgstr "%s(으)로 재정의됩니다; 연결 유형: %s."

#, c-format
#~ msgid "%s not present on layer %s.  No clearance defined."
#~ msgstr ""
#~ "%s이(가) 레이어 %s에 존재하지 않습니다.  정의된 클리어런스가 없습니다."

#~ msgid "Converts selected line segment to an arc"
#~ msgstr "선택한 선 세그먼트를 호로 변환"

#~ msgid "Convert to Tracks"
#~ msgstr "배선으로 변환"

#~ msgid "Converts selected graphic lines to tracks"
#~ msgstr "선택한 그래픽 선을 배선으로 변환"

#~ msgid "Wireframe Zones"
#~ msgstr "와이어프레임 영역"

#~ msgid "Sketch Zones"
#~ msgstr "영역 스케치"

#~ msgid "Show solid areas of zones in outline mode"
#~ msgstr "외곽선 모드에서 영역 내의 솔리드 구역 표시"

#, fuzzy
#~ msgid "Run command:"
#~ msgstr "시뮬레이터 명령:"

#, fuzzy
#~ msgid "Info messages:"
#~ msgstr "메시지:"

#, fuzzy
#~ msgid "Error messages:"
#~ msgstr "메시지:"

#, fuzzy, c-format
#~ msgid "Unable to create \"%s\""
#~ msgstr "<%s>을(를) 생성할 수 없습니다."

#, fuzzy
#~ msgid "Show nets matching:"
#~ msgstr "텍스트 스케치 보이기"

#, fuzzy
#~ msgid "Show all nets"
#~ msgstr "모두 보이기"

#, fuzzy, c-format
#~ msgid "Unable to create report file '%s'<br>"
#~ msgstr "%s 파일을 만들 수 없습니다."

#, fuzzy, c-format
#~ msgid "Unable to create %s"
#~ msgstr "<%s>을(를) 생성할 수 없습니다."

#, fuzzy, c-format
#~ msgid "Unable to create '%s'."
#~ msgstr "<%s>을(를) 생성할 수 없습니다."

#, c-format
#~ msgid "** Unable to create %s **\n"
#~ msgstr "**%s 을(를) 생성할 수 없음**\n"

#, c-format
#~ msgid "Report file %s created\n"
#~ msgstr "%s 보고서 파일이 생성됨\n"

#, fuzzy, c-format
#~ msgid "Unable to create job file '%s'."
#~ msgstr "%s 파일을 만들 수 없습니다."

#, fuzzy
#~ msgid "Fill zone(s)"
#~ msgstr "영역 채우기"

#, fuzzy
#~ msgid "Fill All"
#~ msgstr "채우기"

#, fuzzy
#~ msgid "Fill all zones"
#~ msgstr "영역 채우기"

#, fuzzy
#~ msgid "Unfill zone(s)"
#~ msgstr "영역 채우기"

#~ msgid "Raytracing Options"
#~ msgstr "레이트레이싱 옵션"

#~ msgid "Choose Colors"
#~ msgstr "색상 선택"

#~ msgid "Background Top Color..."
#~ msgstr "배경 색상 Top ..."

#~ msgid "Background Bottom Color..."
#~ msgstr "배경 색상 Bottom ..."

#~ msgid "Silkscreen Color..."
#~ msgstr "실크 스크린 색상 ..."

#~ msgid "Solder Mask Color..."
#~ msgstr "솔더 마스크 색상..."

#~ msgid "Solder Paste Color..."
#~ msgstr "솔더 페이스트 색상 ..."

#~ msgid "Board Body Color..."
#~ msgstr "보드 본체 색상..."

#~ msgid "Set display options, and some layers visibility"
#~ msgstr "디스플레이 옵션 및 레이어 가시성 설정"

#~ msgid "OpenGL Render Options"
#~ msgstr "OpenGL 렌더 옵션"

#~ msgid "Post-processing"
#~ msgstr "후 처리"

#~ msgid "1:"
#~ msgstr "1:"

#~ msgid "5:"
#~ msgstr "5:"

#~ msgid "2:"
#~ msgstr "2:"

#~ msgid "6:"
#~ msgstr "6:"

#~ msgid "3:"
#~ msgstr "3:"

#~ msgid "7:"
#~ msgstr "7:"

#~ msgid "4:"
#~ msgstr "4:"

#~ msgid "8:"
#~ msgstr "8:"

#~ msgid "Reset to defaults"
#~ msgstr "기본값으로 재설정"

#~ msgid "3D Display Options"
#~ msgstr "3D 디스플레이 옵션"

#~ msgid "Copper Color"
#~ msgstr "구리 색상"

#~ msgid "Solder Paste Color"
#~ msgstr "솔더 페이스트 색상"

#~ msgid "Use Diffuse Only"
#~ msgstr "확산 만 사용"

#~ msgid "CAD Color Style"
#~ msgstr "CAD 색상 스타일"

#~ msgid "Procedural Textures"
#~ msgstr "텍스처 자동화"

#~ msgid "Apply procedural textures to materials (slow)"
#~ msgstr "자동화 텍스처를 재료에 적용 (느림)"

#~ msgid "Add Floor"
#~ msgstr "층 추가"

#~ msgid "Adds a floor plane below the board (slow)"
#~ msgstr "보드 아래에 바닥 평면을 추가 (느림)"

#~ msgid "Refractions"
#~ msgstr "굴절"

#~ msgid "Render materials with refractive properties on final render (slow)"
#~ msgstr "최종 렌더링시 굴절 속성이있는 재질 렌더링 (느림)"

#~ msgid "Reflections"
#~ msgstr "반사"

#~ msgid "Render materials with reflective properties on final render (slow)"
#~ msgstr "최종 렌더링시 반사 속성이있는 재질 렌더링 (느림)"

#~ msgid "Render with improved quality on final render (slow)"
#~ msgstr "최종 렌더링에서 향상된 품질로 렌더링 (느림)"

#, c-format
#~ msgid "%s is already running. Continue?"
#~ msgstr "%s 가 이미 실행 중입니다. 계속 하시겠습니까?"

#, c-format
#~ msgid "Archive file \"%s\": Failed!\n"
#~ msgstr "%s 아카이브 파일: 실패!\n"

#, fuzzy
#~ msgid "Common to all &units in component"
#~ msgstr "변환 유닛"

#, fuzzy, c-format
#~ msgid "Plot: \"%s\" OK.\n"
#~ msgstr "플로트: %s\n"

#, c-format
#~ msgid "Unable to create file \"%s\".\n"
#~ msgstr "%s 파일을 만들 수 없음.\n"

#, c-format
#~ msgid "Cannot create file \"%s\".\n"
#~ msgstr "%s 파일을 만들 수 없음.\n"

#, fuzzy, c-format
#~ msgid "Library \"%s\" not found."
#~ msgstr "%s 라이브러리를 찾을 수 없습니다."

#, fuzzy
#~ msgid "Append Schematic"
#~ msgstr "새 회로도 (&S)"

#, fuzzy, c-format
#~ msgid "Failed to save symbol library file \"%s\""
#~ msgstr "문서 라이브러리 파일 만들기 실패"

#, fuzzy
#~ msgid "[no file]"
#~ msgstr "파일 열기:"

#, c-format
#~ msgid ""
#~ "Invalid symbol names definition in\n"
#~ "file: '%s'\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "잘못된 기호 이름 정의\n"
#~ "파일: '%s'\n"
#~ "라인: %d\n"
#~ "옵셋: %d"

#, c-format
#~ msgid ""
#~ "Invalid property value in\n"
#~ "file: '%s'\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "잘못된 속성 값\n"
#~ "파일: '%s'\n"
#~ "라인: %d\n"
#~ "옵셋: %d"

#, c-format
#~ msgid ""
#~ "Invalid symbol library ID in\n"
#~ "file: \"%s\"\n"
#~ "line: %d\n"
#~ "offset: %d"
#~ msgstr ""
#~ "잘못된 기호 라이브러리 ID\n"
#~ "파일: \"%s\"\n"
#~ "라인: %d\n"
#~ "옵셋: %d"

#, fuzzy, c-format
#~ msgid "Error occurred loading schematic file \"%s\"."
#~ msgstr "회로도 라이브러리 열기 시작"

#, fuzzy, c-format
#~ msgid "Library \"%s\" already exists"
#~ msgstr "라이브러리가 이미 사용 중입니다."

#, fuzzy, c-format
#~ msgid "Symbol \"%s\" already exists in library \"%s\""
#~ msgstr "은(는) 라이브러리에 이미 존재합니다."

#, fuzzy, c-format
#~ msgid "Symbol name \"%s\" not found in library \"%s\""
#~ msgstr "%s 라이브러리의 %s 컴포넌트가 삭제되었습니다."

#, fuzzy, c-format
#~ msgid "Symbol \"%s\" already exists in library \"%s\"."
#~ msgstr "은(는) 라이브러리에 이미 존재합니다."

#, fuzzy, c-format
#~ msgid "Cannot load symbol \"%s\" from library \"%s\" (%s)"
#~ msgstr "%s 라이브러리의 %s 컴포넌트가 삭제되었습니다."

#, fuzzy, c-format
#~ msgid "An error \"%s\" occurred saving symbol \"%s\" to library \"%s\""
#~ msgstr "회로도 라이브러리 열기 시작"

#, fuzzy, c-format
#~ msgid "Cannot create file \"%s\""
#~ msgstr "%s 파일을 만들 수 없습니다."

#, fuzzy, c-format
#~ msgid "Error when loading file \"%s\""
#~ msgstr "%d 에러: [%s] 거버 파일을 읽는 중 발생"

#, fuzzy
#~ msgid "Dielectric Layers List"
#~ msgstr "%d 레이어 삭제"

#, fuzzy
#~ msgid "Dielectric Layers"
#~ msgstr "%d 레이어 삭제"

#, fuzzy, c-format
#~ msgid "Unable to create file \"%s\""
#~ msgstr "%s 파일을 만들 수 없습니다."

#, fuzzy
#~ msgid "Drill and plot origin"
#~ msgstr "드릴 원점:"

#, fuzzy, c-format
#~ msgid "Unable to create file \"%s\"."
#~ msgstr "%s 파일을 만들 수 없습니다."

#, fuzzy, c-format
#~ msgid "\"%s\" not found"
#~ msgstr "을(를) 찾을 수 없습니다."

#, fuzzy, c-format
#~ msgid "\"%s\" found"
#~ msgstr "<%s>을(를) 찾았습니다."

#, fuzzy, c-format
#~ msgid "File \"%s\" not found."
#~ msgstr "%s 파일을 찾을 수 없습니다."

#, fuzzy, c-format
#~ msgid "Unable to create \"%s\"."
#~ msgstr "<%s>을(를) 생성할 수 없습니다."

#, fuzzy, c-format
#~ msgid "%s%s [from %s.%s]"
#~ msgstr "%s 라이브러리의 %s 컴포넌트가 삭제되었습니다."

#, fuzzy, c-format
#~ msgid "Unable to create or write file \"%s\""
#~ msgstr "%s 파일을 만들 수 없습니다."

#, fuzzy, c-format
#~ msgid "Library \"%s\" is read only"
#~ msgstr "%s 라이브러리를 찾을 수 없습니다."

#, fuzzy, c-format
#~ msgid "No write permissions to delete file \"%s\""
#~ msgstr "%d 에러: [%s] 거버 파일을 읽는 중 발생"

#, fuzzy, c-format
#~ msgid "User does not have permission to delete directory \"%s\"."
#~ msgstr "%d 에러: [%s] 거버 파일을 읽는 중 발생"

#, fuzzy, c-format
#~ msgid "Page layout description file \"%s\" not found."
#~ msgstr "%s 파일을 찾을 수 없습니다."

#, fuzzy
#~ msgid "Balanced Antialiasing"
#~ msgstr "이탈리아어"

#, fuzzy
#~ msgid "Page layout design files"
#~ msgstr "현재 로드된 라이브러리를 디스크에 저장 (파일 업데이트)"

#, fuzzy, c-format
#~ msgid "Error loading schematic file \"%s\""
#~ msgstr "회로도 라이브러리 열기 시작"

#, fuzzy
#~ msgid "Plugin Type"
#~ msgstr "핀 형식"

#, fuzzy
#~ msgid "Delete Directory"
#~ msgstr "디렉토리 삭제 (&D)"

#~ msgid "Delete File"
#~ msgstr "파일 삭제"

#, fuzzy
#~ msgid "Delete Multiple Items"
#~ msgstr "항목 삭제"

#, fuzzy
#~ msgid "Template Error"
#~ msgstr "만들기 에러 "

#, fuzzy
#~ msgid "Print Page Layout"
#~ msgstr "페이지 인쇄 %d"

#~ msgid "The current page layout has been modified. Save changes?"
#~ msgstr "현재 페이지 레이아웃이 수정되었습니다. 변경 내용을 저장할까요?"

#~ msgid "The current page layout has been modified.  Save changes?"
#~ msgstr "현재 페이지 레이아웃이 수정되었습니다.  변경 내용을 저장할까요?"

#, fuzzy
#~ msgid "New page layout file is unsaved"
#~ msgstr "새 프로젝트 만들기"

#, fuzzy
#~ msgid "Page layout changes are unsaved"
#~ msgstr "현재 로드된 라이브러리를 디스크에 저장 (파일 업데이트)"

#, fuzzy
#~ msgid "Thermal clearance:"
#~ msgstr "마스크 유격"

#, fuzzy
#~ msgid "Thermal Width"
#~ msgstr "트랙 두께"

#, fuzzy
#~ msgid "Thermal Gap"
#~ msgstr "써멀"

#, fuzzy
#~ msgid "Thermal Clearance"
#~ msgstr "마스크 유격"

#, fuzzy, c-format
#~ msgid ""
#~ "Html or pdf help file \n"
#~ "%s\n"
#~ "or\n"
#~ "%s could not be found."
#~ msgstr "도움말 파일을 찾을 수 없습니다."

#, fuzzy
#~ msgid "DC source:"
#~ msgstr "소스 보이기 (&S)"

#, fuzzy
#~ msgid "Vertical up"
#~ msgstr "세로쓰기"

#, fuzzy
#~ msgid "Horizontal right"
#~ msgstr "가로/세로"

#, fuzzy
#~ msgid "Vertical down"
#~ msgstr "세로쓰기"

#, fuzzy
#~ msgid "Close Simulation"
#~ msgstr "시뮬레이터 실행 (&R)"

#, fuzzy
#~ msgid ""
#~ "\n"
#~ "Annotation not performed!\n"
#~ msgstr "애노테이션이 필요합니다!"

#, fuzzy
#~ msgid ""
#~ "\n"
#~ "Reannotate failed!\n"
#~ msgstr "회전 -"

#, fuzzy
#~ msgid "Update schematic"
#~ msgstr "회로도 열기"

#, fuzzy
#~ msgid "Pagination"
#~ msgstr "방향"

#, fuzzy
#~ msgid "All layers on single page"
#~ msgstr "모든 레이어 지우기"

#, fuzzy
#~ msgid "Exclude PCB edge layer"
#~ msgstr "에지 레이어 포함"

#, fuzzy
#~ msgid "locked"
#~ msgstr "잠김"

#, fuzzy
#~ msgid "Eeschema Schematic Editor"
#~ msgstr "EESchema (회로도 에디터)"

#, fuzzy
#~ msgid "PcbNew PCB Layout"
#~ msgstr "거버 파일:"

#, fuzzy
#~ msgid "PcbNew 3D Viewer"
#~ msgstr "3D 뷰어"

#, fuzzy
#~ msgid "Eeschema (Standalone)"
#~ msgstr "EESchema에 대하여 (&A)"

#, fuzzy
#~ msgid "Electronic schematic capture"
#~ msgstr "회로도 파일:"

#, fuzzy
#~ msgid "KiCad electronic schematic design (standalone)"
#~ msgstr "회로도 파일:"

#, fuzzy
#~ msgid "Pcbnew (Standalone)"
#~ msgstr "PCBNEW 도움말 (&H)"

#, fuzzy
#~ msgid "PCB layout"
#~ msgstr "텍스트 에디터"

#, fuzzy
#~ msgid "KiCad printed circuit board layout (standalone)"
#~ msgstr "보드 인쇄"

#, fuzzy
#~ msgid "Gerber File"
#~ msgstr "거버 파일:"

#, fuzzy
#~ msgid "Do not show again."
#~ msgstr "영역 숨기기"

#, fuzzy
#~ msgid "Lock pads"
#~ msgstr "잠김"

#, fuzzy
#~ msgid "low"
#~ msgstr "로우 입력"

#, fuzzy
#~ msgid "Lock pads of newly added footprints"
#~ msgstr "풋프린트 이동"

#, fuzzy
#~ msgid "Enable PSpice model simulation"
#~ msgstr "시뮬레이터 실행 (&R)"

#, fuzzy
#~ msgid "Enable HSpice model simulation"
#~ msgstr "시뮬레이터 실행 (&R)"

#, fuzzy
#~ msgid "Ngspice"
#~ msgstr "&Spice"

#, fuzzy, c-format
#~ msgid "Change %s footprint from \"%s\" to \"%s\"."
#~ msgstr "컴포넌트 %s: 라이브러리에서 %s 풋프린트를 찾을 수 없습니다."

#, fuzzy
#~ msgid "Empty Text!"
#~ msgstr "텍스트 편집"

#~ msgid "Options:"
#~ msgstr "설정"

#, fuzzy
#~ msgid "Custom layer set"
#~ msgstr "커퍼 텍스트 두께"

#, fuzzy
#~ msgid "All layers on"
#~ msgstr "모든 레이어 지우기"

#, fuzzy
#~ msgid "Eeschema (.lib file)"
#~ msgstr "회로도 파일:"

#, fuzzy
#~ msgid "Net Class Memberships"
#~ msgstr "네트 코드"

#, fuzzy
#~ msgid "Accelerated Graphics"
#~ msgstr "그래픽 추가"

#, fuzzy
#~ msgid "Standard Graphics"
#~ msgstr "표준"

#, fuzzy
#~ msgid "Use software graphics (fall-back)"
#~ msgstr "그래픽"

#, fuzzy
#~ msgid "Print the frame references."
#~ msgstr "모듈 레퍼런스 인쇄"

#, fuzzy
#~ msgid "Table Name"
#~ msgstr "네트 이름"

#, fuzzy
#~ msgid "Add a sheet pin"
#~ msgstr "시트 추가"

#, fuzzy
#~ msgid "Export to Pcbnew..."
#~ msgstr "PCBNEW로 내보내기 (&E)"

#, fuzzy
#~ msgid "Export data in Pcbnew format"
#~ msgstr "PCBNEW로 내보내기 (&E)"

#, fuzzy
#~ msgid "Show worksheet"
#~ msgstr "트랙 스케치 보이기"

#, fuzzy
#~ msgid "Add the selected items to a new group"
#~ msgstr "선택된 항목 잘라내기"

#, fuzzy
#~ msgid "View Gerber Files"
#~ msgstr "새 거버 파일 (&G)"

#, fuzzy
#~ msgid "Convert Image"
#~ msgstr "변환"

#, fuzzy
#~ msgid "Edit Worksheet"
#~ msgstr "핀 시트 편집"

#, fuzzy
#~ msgid "Zin"
#~ msgstr "핀"

#, fuzzy
#~ msgid "Tracks & Vias"
#~ msgstr "트랙 작업 (&T)"

#, fuzzy
#~ msgid "Save Copy of Symbol"
#~ msgstr "전원 심볼"

#~ msgid "Messages:"
#~ msgstr "메시지:"

#, fuzzy
#~ msgid "Available Values"
#~ msgstr "기본값"

#, fuzzy
#~ msgid "Save to Board"
#~ msgstr "보드 저장"

#, fuzzy
#~ msgid "Save to Library"
#~ msgstr "새 라이브러리"

#, fuzzy
#~ msgid "Save changes to library"
#~ msgstr "현재 보드 저장"

#, fuzzy, c-format
#~ msgid "Multiple item %s%s (unit %d)\n"
#~ msgstr "복수 항목 %s%s"

#, fuzzy
#~ msgid "Annotation is incomplete. ERC cannot be run."
#~ msgstr "치수 속성"

#, fuzzy
#~ msgid "Annotation not complete. ERC cannot be run."
#~ msgstr "치수 속성"

#, fuzzy
#~ msgid "Show Annotation dialog."
#~ msgstr "치수 속성"

#, fuzzy
#~ msgid "Schematic netlist not available"
#~ msgstr "회로도 파일:"

#, fuzzy
#~ msgid "Settings"
#~ msgstr "패드 설정"

#, fuzzy
#~ msgid "global"
#~ msgstr "전체 적용"

#, fuzzy
#~ msgid "project"
#~ msgstr "프로젝트 (&P)"

#, fuzzy
#~ msgid "Filter Selection"
#~ msgstr "삭제 선택"

#, fuzzy
#~ msgid "Generate Footprint Position Files"
#~ msgstr "풋프린트 삭제"

#, fuzzy
#~ msgid "Select Library Table"
#~ msgstr "탐색할 라이브러리 선택"

#, fuzzy
#~ msgid "Footprint Positions (.pos)..."
#~ msgstr "풋프린트 회전"

#, fuzzy
#~ msgid "Add footprints with pads unlocked"
#~ msgstr "풋프린트 필터"

#, fuzzy, c-format
#~ msgid "Saving symbol in \"%s\""
#~ msgstr "[%s]에 심볼 저장"

#, fuzzy, c-format
#~ msgid "An error occurred saving symbol file \"%s\""
#~ msgstr "회로도 라이브러리 열기 시작"

#~ msgid "Import existing drawings"
#~ msgstr "기존 드로잉 가져오기"

#~ msgid "Export current drawing"
#~ msgstr "현재 드로잉 내보내기"

#, fuzzy
#~ msgid "No pins!"
#~ msgstr "핀 보이기"

#, fuzzy
#~ msgid "Marker Information"
#~ msgstr "마커를 찾을 수 없습니다."

#, fuzzy
#~ msgid "Set to 0 for default"
#~ msgstr "비아홀 크기 초기화"

#, fuzzy
#~ msgid "Step"
#~ msgstr "X 증분값:"

#, fuzzy
#~ msgid "Incorrect value for pad offset."
#~ msgstr "잘못된 번호, 중지"

#, fuzzy
#~ msgid "&Keep unused layers"
#~ msgstr "정의된 홀"

#, fuzzy
#~ msgid "Flip"
#~ msgstr "플립 (S)"

#, fuzzy
#~ msgid "Position:"
#~ msgstr "위치 "

#, fuzzy
#~ msgid "Clarify selection"
#~ msgstr "삭제 선택"

#, fuzzy
#~ msgid "Clarify Selection"
#~ msgstr "선택"

#, fuzzy
#~ msgid "Convert..."
#~ msgstr "변환"

#, fuzzy
#~ msgid "Tight"
#~ msgstr "오른쪽"

#, fuzzy
#~ msgid "Drill too small"
#~ msgstr "비아 드릴"

#, fuzzy, c-format
#~ msgid "(%s %s; actual %s)"
#~ msgstr "유닛 %d %c"

#, fuzzy
#~ msgid "Global label"
#~ msgstr "전역 라벨 추가"

#, fuzzy
#~ msgid "Pin number"
#~ msgstr "펜 번호:"

#, fuzzy
#~ msgid "Net name"
#~ msgstr "네트 이름"

#, fuzzy
#~ msgid "Sheet label"
#~ msgstr "시트 라벨"

#, fuzzy
#~ msgid "Associate footprint"
#~ msgstr "선택된 부품 보기"

#, fuzzy
#~ msgid "Associate selected footprint with selected components"
#~ msgstr "텍스트 에디터로 열기 (&O)"

#, fuzzy
#~ msgid "component"
#~ msgstr "Component"

#, fuzzy, c-format
#~ msgid "%s %s found"
#~ msgstr "을(를) 찾을 수 없습니다."

#, fuzzy, c-format
#~ msgid "Component %s not found"
#~ msgstr "[%s] 컴포넌트를 찾을 수 없습니다."

#, fuzzy
#~ msgid "symbols"
#~ msgstr "전원 심볼"

#, fuzzy
#~ msgid "Reset field visibilities"
#~ msgstr "시트 속성"

#, fuzzy
#~ msgid "Plot sheet background color"
#~ msgstr "배경색 선택"

#, fuzzy
#~ msgid "No Colon in Nicknames"
#~ msgstr "컴포넌트 이름이 없습니다!"

#, fuzzy
#~ msgid "Symbol library not found."
#~ msgstr "라이브러리 에디터 실행"

#, fuzzy, c-format
#~ msgid ""
#~ "Library \"%s\" is read only and must be saved as a different library."
#~ msgstr "하나의 라이브러리 파일에 풋프린트 압축 또는 추가"

#, fuzzy
#~ msgid "Select symbol to browse"
#~ msgstr "탐색할 부품 선택"

#, fuzzy, c-format
#~ msgid "Change '%s' global labels to '%s'."
#~ msgstr "전역 라벨로 바꾸기"

#, fuzzy, c-format
#~ msgid "Change '%s' hierarchical label to '%s'."
#~ msgstr "라벨로 바꾸기"

#, fuzzy
#~ msgid "Run Cvpcb"
#~ msgstr "Cvpcb 종료"

#, fuzzy
#~ msgid "Edit Component Name"
#~ msgstr "컴포넌트 이름이 없습니다!"

#, fuzzy
#~ msgid "Default Values:"
#~ msgstr "기본값"

#, fuzzy
#~ msgid "3D Settings"
#~ msgstr "3D 설정"

#, fuzzy, c-format
#~ msgid "%s footprint \"%s\" (from \"%s\") to \"%s\""
#~ msgstr "%s 라이브러리의 %s 컴포넌트가 삭제되었습니다."

#, fuzzy
#~ msgid "Reset text layers and visibilities"
#~ msgstr "시트 속성"

#, fuzzy
#~ msgid "Reset text sizes, styles and positions"
#~ msgstr "기존 드로잉 가져오기"

#, fuzzy
#~ msgid "Reset 3D models"
#~ msgstr "D-Code 보이기"

#, fuzzy
#~ msgid "Keepout violation"
#~ msgstr "트랙 삭제"

#, fuzzy, c-format
#~ msgid "Wrote board file: \"%s\""
#~ msgstr "보드 파일 쓰기:"

#, fuzzy, c-format
#~ msgid "Component \"%s\" replaced in \"%s\""
#~ msgstr "%s 컴포넌트가 %s에 저장되었습니다."

#, fuzzy, c-format
#~ msgid "Component \"%s\" added in \"%s\""
#~ msgstr "%s 컴포넌트가 %s에 저장되었습니다."

#, fuzzy
#~ msgid "Locked items cannot be deleted"
#~ msgstr "%s 라이브러리를 찾을 수 없습니다."

#, fuzzy
#~ msgid "Toggle Locking"
#~ msgstr "잠김"

#, fuzzy
#~ msgid "Bitmap Info:"
#~ msgstr "KiCad 정보"

#, fuzzy
#~ msgid "Format:"
#~ msgstr "플로트 형식"

#, fuzzy
#~ msgid "Change \"%s\" reference designator to \"%s\"."
#~ msgstr "설정 (&P)"

#, fuzzy
#~ msgid "Drill/Place Origin"
#~ msgstr "드릴 원점:"

#, fuzzy
#~ msgid "Processing courtyard of \"%s\": %s"
#~ msgstr "라이브러리 파일 저장 중 에러"

#, fuzzy
#~ msgid "Line width (DXF import):"
#~ msgstr "선 두께"

#, fuzzy
#~ msgid "Zone Outline %s on %s"
#~ msgstr "모듈 배치 %s %s"

#, fuzzy
#~ msgid "Modify module properties"
#~ msgstr "모듈 속성"

#, fuzzy
#~ msgid "Other corners:"
#~ msgstr "설정"

#, fuzzy
#~ msgid "Via Length:"
#~ msgstr "핀 길이:"

#, fuzzy
#~ msgid "Constant"
#~ msgstr "풋프린트"

#, fuzzy
#~ msgid "From Stackup"
#~ msgstr "보드 파일:"

#, fuzzy
#~ msgid "Create microwave module"
#~ msgstr "동일한 모듈 바꾸기"

#, fuzzy
#~ msgid "Preferences...\tCTRL+,"
#~ msgstr "설정 (&P)"

#, fuzzy
#~ msgid "Annotation not complete.  ERC cannot be run.  "
#~ msgstr "치수 속성"

#, fuzzy
#~ msgid ""
#~ "\n"
#~ "\n"
#~ "Front Modules"
#~ msgstr "모듈이 없습니다."

#, fuzzy
#~ msgid ""
#~ "\n"
#~ "\n"
#~ "Back Modules"
#~ msgstr "모듈이 없습니다."

#, fuzzy
#~ msgid "%s selected footprint"
#~ msgstr "선택된 부품 보기"

#, fuzzy
#~ msgid "Net Id"
#~ msgstr "네트 코드"

#, fuzzy
#~ msgid "Via count"
#~ msgstr "세로쓰기"

#, fuzzy
#~ msgid "Board length"
#~ msgstr "보드 파일:"

#, fuzzy
#~ msgid "Aborted by user"
#~ msgstr "이미 사용 중입니다."

#, fuzzy
#~ msgid "Default 3D Path"
#~ msgstr "기본 형식"

#, fuzzy
#~ msgid "Unselect all"
#~ msgstr "선택 해제"

#, fuzzy
#~ msgid "3D shape libraries to be downloaded:"
#~ msgstr "라이브러리가 로드되지 않았습니다."

#, fuzzy
#~ msgid "in symbol %c"
#~ msgstr "필드 편집"

#, fuzzy
#~ msgid "of converted"
#~ msgstr "  변환"

#, fuzzy
#~ msgid "of normal"
#~ msgstr "  표준"

#, fuzzy
#~ msgid "Use auxiliary axis as origin"
#~ msgstr "보조축"

#, fuzzy
#~ msgid "Auxiliary axis"
#~ msgstr "보조축"

#, fuzzy
#~ msgid "Incorrect value for pad drill: pad drill bigger than pad size"
#~ msgstr "비아 드릴에 부적합한 값입니다. 비아 드릴은 변경되지 않았습니다."

#, fuzzy
#~ msgid "Archive Footprints"
#~ msgstr "풋프린트 압축"

#, fuzzy
#~ msgid "&Archive Footprints in Existing Library..."
#~ msgstr "하나의 라이브러리 파일에 풋프린트 압축 또는 추가"

#, fuzzy
#~ msgid "&Create New Library and Archive Footprints..."
#~ msgstr "새 라이브러리 만든 후 현재 모듈 저장"

#, fuzzy
#~ msgid "Field Locate Reference"
#~ msgstr "모듈 레퍼런스:"

#, fuzzy
#~ msgid "Field Locate Value"
#~ msgstr "필드 이름:"

#, fuzzy
#~ msgid "Field Locate Footprint"
#~ msgstr "풋프린트"

#, fuzzy
#~ msgid " X:"
#~ msgstr " X"

#, fuzzy
#~ msgid " Y:"
#~ msgstr " Y"

#, fuzzy
#~ msgid "key words"
#~ msgstr "키워드:"

#, fuzzy
#~ msgid "library"
#~ msgstr "라이브러리"

#, fuzzy
#~ msgid "new"
#~ msgstr "새 파일 (&N)"

#, fuzzy
#~ msgid "Run"
#~ msgstr "실행 (&R)"

#, fuzzy
#~ msgid "milli"
#~ msgstr "mm"

#, fuzzy
#~ msgid "k"
#~ msgstr "확인"

#, fuzzy
#~ msgid "1e3"
#~ msgstr "&13"

#, fuzzy
#~ msgid "1e6"
#~ msgstr "&16"

#, fuzzy
#~ msgid "Key words:"
#~ msgstr "키워드:"

#, fuzzy
#~ msgid "Key words"
#~ msgstr "키워드:"

#, fuzzy
#~ msgid "File: "
#~ msgstr "파일"

#, fuzzy
#~ msgid " in units %c and %c"
#~ msgstr "유닛 %d %c"

#, fuzzy
#~ msgid "  of converted"
#~ msgstr "  변환"

#, fuzzy
#~ msgid "  of normal"
#~ msgstr "  표준"

#, fuzzy
#~ msgid "- Width: "
#~ msgstr "두께"

#, fuzzy
#~ msgid "- Height: "
#~ msgstr "오른쪽"

#, fuzzy
#~ msgid ""
#~ "Pads\n"
#~ "----"
#~ msgstr "패드"

#, fuzzy
#~ msgid ""
#~ "Vias\n"
#~ "----"
#~ msgstr "비아"

#, fuzzy
#~ msgid ""
#~ "Components\n"
#~ "----------"
#~ msgstr "컴포넌트"

#~ msgid "Unable to create "
#~ msgstr "다음을 생성할 수 없습니다: "

#~ msgid ""
#~ "Show active layer selections\n"
#~ "and select layer pair for route and place via"
#~ msgstr ""
#~ "활성 레이어 선택 보이기 및\n"
#~ "배선, 비아 설치를 위한 레이어쌍 선택"

#, fuzzy
#~ msgid "Key Words: %s"
#~ msgstr "키워드:"

#~ msgid "Zoom +"
#~ msgstr "확대 +"

#~ msgid "Zoom -"
#~ msgstr "축소 -"

#~ msgid "Right View"
#~ msgstr "오른쪽에서 보기"

#~ msgid "Left View"
#~ msgstr "왼쪽에서 보기"

#, fuzzy
#~ msgid "Move Left <-"
#~ msgstr "왼쪽으로 이동 <-"

#, fuzzy
#~ msgid "Move Right ->"
#~ msgstr "오른쪽으로 이동 ->"

#~ msgid "Move Up ^"
#~ msgstr "위쪽으로 이동 ^"

#~ msgid "&Exit"
#~ msgstr "끝내기 (&E)"

#, fuzzy
#~ msgid "Zoom &In"
#~ msgstr "확대"

#, fuzzy
#~ msgid "Zoom &Out"
#~ msgstr "확대"

#, fuzzy
#~ msgid "&Redraw"
#~ msgstr "새로 고침"

#, fuzzy
#~ msgid "Move right"
#~ msgstr "오른쪽으로 이동 ->"

#, fuzzy
#~ msgid "OpenGL Options"
#~ msgstr "업데이트 설정"

#, fuzzy
#~ msgid "Show Copper Thickness"
#~ msgstr "핀 보이기"

#, fuzzy
#~ msgid "Zoom in"
#~ msgstr "확대"

#, fuzzy
#~ msgid "Zoom out"
#~ msgstr "확대"

#, fuzzy
#~ msgid "Redraw view"
#~ msgstr "새로 고침"

#, fuzzy
#~ msgid "List Hotkeys"
#~ msgstr "D-Codes 목록 (&L)"

#, fuzzy
#~ msgid "Zoom in "
#~ msgstr "확대"

#, fuzzy
#~ msgid "Viewer 3D"
#~ msgstr "3D 뷰어"

#, fuzzy
#~ msgid "Blue 1"
#~ msgstr "값 "

#, fuzzy
#~ msgid "Brown 1"
#~ msgstr "찾아보기"

#, fuzzy
#~ msgid "Blue 2"
#~ msgstr "값 "

#, fuzzy
#~ msgid "Brown 2"
#~ msgstr "찾아보기"

#, fuzzy
#~ msgid "Blue 3"
#~ msgstr "값 "

#, fuzzy
#~ msgid "Blue 4"
#~ msgstr "값 "

#, fuzzy
#~ msgid "Half Size"
#~ msgstr "가로 크기"

#, fuzzy
#~ msgid "Graphics (Accelerated):"
#~ msgstr "그래픽"

#, fuzzy
#~ msgid "Reset Hotkeys"
#~ msgstr "D-Codes 목록 (&L)"

#, fuzzy
#~ msgid "Set to Defaults"
#~ msgstr "비아홀 크기 초기화"

#, fuzzy
#~ msgid "Import..."
#~ msgstr "가져오기"

#, fuzzy
#~ msgid "Export these hotkey definitions to an external file"
#~ msgstr "단축키 설정 파일:"

#, fuzzy
#~ msgid "Could not create backup file \"%s\""
#~ msgstr "%s 파일을 만들 수 없습니다."

#, fuzzy
#~ msgid "Read Hotkey Configuration File:"
#~ msgstr "단축키 설정 파일:"

#, fuzzy
#~ msgid "Write Hotkey Configuration File:"
#~ msgstr "단축키 설정 파일:"

#~ msgid "Block Move"
#~ msgstr "블록 이동"

#~ msgid "Block Drag"
#~ msgstr "블록 드래그"

#, fuzzy
#~ msgid "Block Duplicate"
#~ msgstr "블록 삭제"

#~ msgid "Block Delete"
#~ msgstr "블록 삭제"

#~ msgid "Block Copy"
#~ msgstr "블록 복사"

#~ msgid "Block Paste"
#~ msgstr "불록 붙여넣기"

#, fuzzy
#~ msgid "Block Flip"
#~ msgstr "블록 복사"

#, fuzzy
#~ msgid "Redraw View"
#~ msgstr "새로 고침"

#, fuzzy
#~ msgid "Marker Info"
#~ msgstr "마커를 찾았습니다."

#~ msgid "French"
#~ msgstr "프랑스어"

#~ msgid "Spanish"
#~ msgstr "스페인어"

#~ msgid "Portuguese"
#~ msgstr "포르투갈어"

#~ msgid "Italian"
#~ msgstr "이탈리아어"

#, fuzzy
#~ msgid "German"
#~ msgstr "써멀"

#~ msgid "Slovenian"
#~ msgstr "슬로바니아어"

#, fuzzy
#~ msgid "Slovak"
#~ msgstr "슬로바니아어"

#~ msgid "Hungarian"
#~ msgstr "헝가리어"

#~ msgid "Polish"
#~ msgstr "폴란드어"

#~ msgid "Dutch"
#~ msgstr "독일어"

#, fuzzy
#~ msgid "Bulgarian"
#~ msgstr "헝가리어"

#, fuzzy
#~ msgid "Unable to find \"%s\" template config file."
#~ msgstr "데이터 파일을 찾을 수 없습니다."

#, fuzzy
#~ msgid "Restore All to Default"
#~ msgstr "비아홀 크기 초기화"

#, fuzzy
#~ msgid "View Footprint"
#~ msgstr "풋프린트"

#, fuzzy
#~ msgid "Drawing Options"
#~ msgstr "드로우 설정:"

#, fuzzy
#~ msgid "Graphic items sketch mode"
#~ msgstr "트랙 스케치 모드 보이기"

#, fuzzy
#~ msgid "Texts sketch mode"
#~ msgstr "트랙 스케치 모드 보이기"

#, fuzzy
#~ msgid "Show pad &numbers"
#~ msgstr "패드 번호 보이기"

#, fuzzy
#~ msgid "Auto-zoom"
#~ msgstr "자동 확대"

#, fuzzy
#~ msgid "Display polar coordinates"
#~ msgstr "좌표 보이기"

#, fuzzy
#~ msgid "Set units to millimeters"
#~ msgstr "mm"

#, fuzzy
#~ msgid "Change cursor shape"
#~ msgstr "커서 모양 바꾸기"

#, fuzzy
#~ msgid "Show texts in line mode"
#~ msgstr "패드 채움 모드 보이기"

#, fuzzy
#~ msgid "Display options"
#~ msgstr "표시 설정"

#, fuzzy
#~ msgid "Zoom in (F1)"
#~ msgstr "확대 + (F1)"

#, fuzzy
#~ msgid "Zoom out (F2)"
#~ msgstr "축소 - (F2)"

#, fuzzy
#~ msgid "Redraw view (F3)"
#~ msgstr "새로 고침 (F3)"

#, fuzzy
#~ msgid "3D Display (Alt+3)"
#~ msgstr "3D 표시"

#, fuzzy
#~ msgid "&Save Schematic\tCtrl+S"
#~ msgstr "회로도 저장 (&S)"

#, fuzzy
#~ msgid "&Configure Paths..."
#~ msgstr "설정"

#, fuzzy
#~ msgid "Duplicate time stamp (%s) for %s%d and %s%d"
#~ msgstr "핀 중복  %4.4s (핀 %s 위치 %d, %d, 및 핀 %s 위치 %d, %d)"

#, fuzzy
#~ msgid "Plugin nickname:"
#~ msgstr "플러그인 파일:"

#~ msgid "Add Plugin"
#~ msgstr "플러그인 추가"

#~ msgid "Plugin files:"
#~ msgstr "플러그인 파일:"

#, fuzzy
#~ msgid "BOM plugins:"
#~ msgstr "플러그인 파일:"

#, fuzzy
#~ msgid "Symbol name \"%s\" already exists in library \"%s\"."
#~ msgstr "%s 라이브러리의 %s 컴포넌트가 삭제되었습니다."

#, fuzzy
#~ msgid "Aliases:"
#~ msgstr "별명"

#, fuzzy
#~ msgid "Add alias"
#~ msgstr "별명"

#, fuzzy
#~ msgid "Delete alias"
#~ msgstr "항목 삭제"

#, fuzzy
#~ msgid "Library reference is not valid."
#~ msgstr "라이브러리 파일이 아닙니다."

#, fuzzy
#~ msgid "Library Reference:"
#~ msgstr "새 라이브러리"

#, fuzzy
#~ msgid "Browse library"
#~ msgstr "라이브러리 탐색: "

#, fuzzy
#~ msgid "General:"
#~ msgstr "일반"

#~ msgid "Marker not found"
#~ msgstr "마커를 찾을 수 없습니다."

#, fuzzy
#~ msgid "ERC File"
#~ msgstr "ERC 파일:"

#, fuzzy
#~ msgid "ERC Report:"
#~ msgstr "ERC 파일 리포트"

#, fuzzy
#~ msgid "Warnings:"
#~ msgstr "경고"

#, fuzzy
#~ msgid "Errors:"
#~ msgstr "에러"

#, fuzzy
#~ msgid "Create ERC file report"
#~ msgstr "파일 만들기"

#, fuzzy
#~ msgid "Error List:"
#~ msgstr "에러"

#, fuzzy
#~ msgid "Label to Label Connections"
#~ msgstr "연결 삭제"

#, fuzzy
#~ msgid "Pin n&umber:"
#~ msgstr "펜 번호:"

#, fuzzy
#~ msgid "&Orientation:"
#~ msgstr "방향"

#, fuzzy
#~ msgid "General Settings:"
#~ msgstr "일반 설정"

#~ msgid "&Run Simulator"
#~ msgstr "시뮬레이터 실행 (&R)"

#, fuzzy
#~ msgid "Generate Netlist"
#~ msgstr "네트리스트 읽기"

#, fuzzy
#~ msgid "Add Plugin..."
#~ msgstr "플러그인 추가"

#, fuzzy
#~ msgid "Remove Plugin..."
#~ msgstr "플러그인 찾아보기 (&B)"

#, fuzzy
#~ msgid "Browse Plugins"
#~ msgstr "플러그인 찾아보기 (&B)"

#, fuzzy
#~ msgid "&File name:"
#~ msgstr "파일 이름:"

#, fuzzy
#~ msgid "&Sheet name:"
#~ msgstr "시트 이름:"

#, fuzzy
#~ msgid "Unique timestamp:"
#~ msgstr "타임스탬프"

#, fuzzy
#~ msgid "Status..."
#~ msgstr "시작"

#, fuzzy
#~ msgid "&Grid size:"
#~ msgstr "그리드 크기:"

#, fuzzy
#~ msgid "Fields to Update:"
#~ msgstr "추가할 필드"

#, fuzzy
#~ msgid "&Line thickness:"
#~ msgstr "선 설정"

#, fuzzy
#~ msgid "ERC err unspecified"
#~ msgstr "지정하지 않음"

#, fuzzy
#~ msgid "Save Project File"
#~ msgstr "프로젝트 파일 저장 (&P)"

#, fuzzy
#~ msgid "Duplicate sheet name"
#~ msgstr "중복"

#, fuzzy
#~ msgid "Global label %s is not connected to any other global label."
#~ msgstr "경고: %s 전역 라벨이 시트 라벨에 연결되어 있지 않습니다."

#, fuzzy
#~ msgid "Pin %s (%s) of component %s is not driven (Net %d)."
#~ msgstr "경고: %s 핀이 연결되어 있지 않습니다. (%d 네트)"

#, fuzzy
#~ msgid "field %s"
#~ msgstr "필드"

#, fuzzy
#~ msgid "Undo last command"
#~ msgstr "마지막 수정 되돌리기"

#, fuzzy
#~ msgid "Zoom to fit schematic page"
#~ msgstr "회로도로 내보내기"

#, fuzzy
#~ msgid "Redraw schematic view"
#~ msgstr "새 프로젝트"

#~ msgid "Delete item"
#~ msgstr "항목 삭제"

#, fuzzy
#~ msgid "Find symbols and text"
#~ msgstr "컴포넌트 및 텍스트 찾기"

#, fuzzy
#~ msgid "Place wire"
#~ msgstr "노드 설치"

#, fuzzy
#~ msgid "Place bus"
#~ msgstr "셀 배치"

#, fuzzy
#~ msgid "Place wire to bus entry"
#~ msgstr "버스에 와이어 추가"

#, fuzzy
#~ msgid "Place bus to bus entry"
#~ msgstr "버스에 버스 추가"

#, fuzzy
#~ msgid "Place net label"
#~ msgstr "셀 배치"

#, fuzzy
#~ msgid "Place junction"
#~ msgstr "교차점 삭제"

#, fuzzy
#~ msgid "Place hierarchical pin in sheet"
#~ msgstr "시트에 계층구조 핀 추가"

#, fuzzy
#~ msgid "Add graphic rectangle to symbol body"
#~ msgstr "그래픽 선 또는 다각형 추가"

#, fuzzy
#~ msgid "Add arcs to symbol body"
#~ msgstr "이전 보드에 새 보드 추가"

#, fuzzy
#~ msgid "Add lines and polygons to symbol body"
#~ msgstr "선 및 다각형 추가"

#, fuzzy
#~ msgid "Zoom Center"
#~ msgstr "가운데"

#, fuzzy
#~ msgid "Zoom Redraw"
#~ msgstr "새로 고침"

#, fuzzy
#~ msgid "Add Graphic PolyLine"
#~ msgstr "그래픽 추가"

#, fuzzy
#~ msgid "Add Graphic Text"
#~ msgstr "그래픽 텍스트 추가"

#, fuzzy
#~ msgid "Orient Normal Component"
#~ msgstr "컴포넌트 방향 설정"

#, fuzzy
#~ msgid "Edit Item"
#~ msgstr "네트 편집"

#, fuzzy
#~ msgid "Edit Symbol Footprint"
#~ msgstr "풋프린트 이동"

#, fuzzy
#~ msgid "Move Schematic Item"
#~ msgstr "회로도 저장 (&S)"

#, fuzzy
#~ msgid "Delete Item"
#~ msgstr "항목 삭제"

#, fuzzy
#~ msgid "Delete Node"
#~ msgstr "노드 삭제"

#, fuzzy
#~ msgid "Move Library Item"
#~ msgstr "활성 라이브러리가 없습니다."

#, fuzzy
#~ msgid "Highlight Connection"
#~ msgstr "연결 삭제"

#, fuzzy
#~ msgid "Failed to save backup document to file "
#~ msgstr "문서 라이브러리 파일 만들기 실패"

#~ msgid "End Tool"
#~ msgstr "도구 마침"

#, fuzzy
#~ msgid "&Paste"
#~ msgstr "붙여넣기"

#, fuzzy
#~ msgid "Pastes copied item(s)"
#~ msgstr "선택된 항목 잘라내기"

#, fuzzy
#~ msgid "Edit Arc Options"
#~ msgstr "호 설정"

#, fuzzy
#~ msgid "Drag Circle Outline"
#~ msgstr "원 설정"

#, fuzzy
#~ msgid "Edit Circle Options..."
#~ msgstr "원 설정"

#, fuzzy
#~ msgid "Edit Rectangle Options..."
#~ msgstr "사각형 설정"

#, fuzzy
#~ msgid "Drag Edge Point"
#~ msgstr "세그먼트 드래그"

#~ msgid "Line End"
#~ msgstr "선 마침"

#, fuzzy
#~ msgid "Push Pin Size to Selected Pin"
#~ msgstr "선택된 핀에 핀 크기"

#, fuzzy
#~ msgid "Push Pin Size to Others"
#~ msgstr "다른 핀에 핀 크기 적용"

#, fuzzy
#~ msgid "Push Pin Name Size to Selected Pin"
#~ msgstr "선택된 핀에 핀 이름 크기 적용"

#, fuzzy
#~ msgid "Push Pin Num Size to Selected Pin"
#~ msgstr "선택된 핀에 핀 번호 크기 적용"

#~ msgid "Cancel Block"
#~ msgstr "블록 취소"

#, fuzzy
#~ msgid "Zoom Block"
#~ msgstr "블록 이동"

#, fuzzy
#~ msgid "Cut Block"
#~ msgstr "블록 복사"

#~ msgid "Copy Block"
#~ msgstr "블록 복사"

#, fuzzy
#~ msgid "Duplicate Block"
#~ msgstr "블록 삭제"

#~ msgid "Delete Block"
#~ msgstr "블록 삭제"

#~ msgid "No component"
#~ msgstr "컴포넌트 없음"

#, fuzzy
#~ msgid "Creates an empty library"
#~ msgstr "새 디렉토리 만들기"

#, fuzzy
#~ msgid "Save &As..."
#~ msgstr "다른 이름으로 저장 (&S)..."

#, fuzzy
#~ msgid "Save all library and symbol changes"
#~ msgstr ""
#~ "\n"
#~ "모든 라이브러리를 탐색하시겠습니까?"

#, fuzzy
#~ msgid "&Revert"
#~ msgstr "안 함"

#, fuzzy
#~ msgid "&Export Symbol..."
#~ msgstr "보드 내보내기"

#, fuzzy
#~ msgid "Create a library file containing only the current symbol"
#~ msgstr "현재 레이어의 소스 파일 보이기"

#, fuzzy
#~ msgid "Quit Library Editor"
#~ msgstr "라이브러리 에디터 실행"

#, fuzzy
#~ msgid "&Undo"
#~ msgstr "되돌리기 (&U)\t"

#, fuzzy
#~ msgid "&Redo"
#~ msgstr "다시 실행 (&R)\t"

#~ msgid "Redo the last undo command"
#~ msgstr "마지막 되돌리기 명령 취소"

#, fuzzy
#~ msgid "&Properties..."
#~ msgstr "속성"

#, fuzzy
#~ msgid "Show pin table"
#~ msgstr "핀 이름 보이기"

#, fuzzy
#~ msgid "Grid Settings..."
#~ msgstr "패드 설정"

#, fuzzy
#~ msgid "Graphic &Text"
#~ msgstr "그래픽 텍스트 추가"

#, fuzzy
#~ msgid "&Rectangle"
#~ msgstr "사각형 추가"

#, fuzzy
#~ msgid "&Circle"
#~ msgstr "원"

#, fuzzy
#~ msgid "Electrical Rules &Checker"
#~ msgstr "회로도 ERC"

#, fuzzy
#~ msgid "Check duplicate and off grid pins"
#~ msgstr "중복 핀 테스트"

#, fuzzy
#~ msgid "Create new symbol"
#~ msgstr "새 파일 만들기:"

#, fuzzy
#~ msgid "Show as \"De Morgan\" normal symbol"
#~ msgstr "드모르강 표준 부품으로 표시"

#, fuzzy
#~ msgid "Symbol Library &Browser"
#~ msgstr "라이브러리 브라우저"

#, fuzzy
#~ msgid "&Leave Sheet"
#~ msgstr "시트 나가기"

#, fuzzy
#~ msgid "Return to parent schematic sheet"
#~ msgstr "현재 시트를 다른 이름으로 저장..."

#, fuzzy
#~ msgid "&Symbol"
#~ msgstr "전원 심볼"

#, fuzzy
#~ msgid "&Power Port"
#~ msgstr "전원 출력"

#, fuzzy
#~ msgid "&Wire"
#~ msgstr "와이어"

#, fuzzy
#~ msgid "Bus &to Bus Entry"
#~ msgstr "버스에 버스 추가"

#, fuzzy
#~ msgid "&Junction"
#~ msgstr "교차점"

#, fuzzy
#~ msgid "&Label"
#~ msgstr "라벨"

#, fuzzy
#~ msgid "Gl&obal Label"
#~ msgstr "전역 라벨"

#, fuzzy
#~ msgid "Hierarchical Pi&n to Sheet"
#~ msgstr "시트에 계층구조 핀 추가"

#, fuzzy
#~ msgid "&Graphic Text"
#~ msgstr "그래픽 텍스트 추가"

#, fuzzy
#~ msgid "Start new schematic root sheet"
#~ msgstr "회로도 인쇄"

#, fuzzy
#~ msgid "Open recently opened schematic"
#~ msgstr "회로도로 내보내기"

#, fuzzy
#~ msgid "Save &Current Sheet"
#~ msgstr "시트 저장 (&C)"

#, fuzzy
#~ msgid "&Import"
#~ msgstr "가져오기"

#, fuzzy
#~ msgid "Import files"
#~ msgstr "Cmp 파일:"

#~ msgid "E&xport"
#~ msgstr "내보내기 (&X)"

#, fuzzy
#~ msgid "Print schematic sheet"
#~ msgstr "회로도 인쇄"

#, fuzzy
#~ msgid "Close Eeschema"
#~ msgstr "EESchema 종료"

#, fuzzy
#~ msgid "&Copy"
#~ msgstr "문서 복사"

#, fuzzy
#~ msgid "&Delete"
#~ msgstr "삭제"

#~ msgid "Run Pcbnew"
#~ msgstr "PCBNEW 실행"

#, fuzzy
#~ msgid "Symbol Library &Editor"
#~ msgstr "라이브러리 에디터 실행"

#, fuzzy
#~ msgid "Generate &Netlist File..."
#~ msgstr "네트리스트 파일 열기 (&L)"

#, fuzzy
#~ msgid "Open Eeschema Manual"
#~ msgstr "설정 저장 (&S)"

#, fuzzy
#~ msgid "Configure Pa&ths..."
#~ msgstr "설정"

#, fuzzy
#~ msgid "&Save Project File..."
#~ msgstr "프로젝트 파일 저장 (&P)"

#, fuzzy
#~ msgid "Save project preferences into a project file"
#~ msgstr "모든 프로젝트 파일 저장 후 Zip 압축하기"

#, fuzzy
#~ msgid "Load P&roject File..."
#~ msgstr "프로젝트 파일 열기:"

#, fuzzy
#~ msgid "Net count = %d"
#~ msgstr "세스먼트 수 = %d, 길이 = "

#, fuzzy
#~ msgid "Edit Label..."
#~ msgstr "라벨 편집"

#, fuzzy
#~ msgid "Edit Image..."
#~ msgstr "라벨 편집"

#, fuzzy
#~ msgid "Delete No Connect"
#~ msgstr "연결 삭제"

#~ msgid "Delete Drawing"
#~ msgstr "드로잉 삭제"

#, fuzzy
#~ msgid "Move Value"
#~ msgstr "라벨 이동"

#, fuzzy
#~ msgid "Move Footprint Field"
#~ msgstr "풋프린트 이동"

#~ msgid "Move Field"
#~ msgstr "필드 이동"

#, fuzzy
#~ msgid "Rotate Footprint Field"
#~ msgstr "필드 회전"

#, fuzzy
#~ msgid "Edit Footprint Field..."
#~ msgstr "풋프린트 필터"

#, fuzzy
#~ msgid "Move %s"
#~ msgstr "이동"

#, fuzzy
#~ msgid "Open Documentation"
#~ msgstr "풋프린트 문서"

#, fuzzy
#~ msgid "Edit Properties..."
#~ msgstr "속성"

#, fuzzy
#~ msgid "Edit with Library Editor"
#~ msgstr "라이브러리 에디터 실행"

#, fuzzy
#~ msgid "Delete Junction"
#~ msgstr "교차점 삭제"

#, fuzzy
#~ msgid "Wire End"
#~ msgstr "선 마침"

#, fuzzy
#~ msgid "Add Label..."
#~ msgstr "라벨 추가"

#, fuzzy
#~ msgid "Add Global Label..."
#~ msgstr "전역 라벨 추가"

#~ msgid "Delete Bus"
#~ msgstr "버스 삭제"

#, fuzzy
#~ msgid "Place"
#~ msgstr "노드 설치"

#, fuzzy
#~ msgid "Resize"
#~ msgstr "시트 크기 재설정"

#, fuzzy
#~ msgid "Window Zoom"
#~ msgstr "창 확대/축소"

#, fuzzy
#~ msgid "Drag Block"
#~ msgstr "블록 저장"

#, fuzzy
#~ msgid "Rotate Block CCW"
#~ msgstr "블록 회전"

#, fuzzy
#~ msgid "Marker Error Info"
#~ msgstr "마커를 찾을 수 없습니다."

#, fuzzy
#~ msgid "Move Bus Entry"
#~ msgstr "버스 이동"

#, fuzzy
#~ msgid "Set Bus Entry Shape \\"
#~ msgstr "버스 설정: -45도"

#, fuzzy
#~ msgid "Delete Bus Entry"
#~ msgstr "버스 삭제"

#, fuzzy
#~ msgid "Match %i of %i: %s in sheet %s"
#~ msgstr "시트 내의 항목 (&S)"

#, fuzzy
#~ msgid "Draw wires and buses in any direction"
#~ msgstr "어느 방향으로나 선 그리기"

#, fuzzy
#~ msgid "Do not show hidden pins"
#~ msgstr "숨은 핀 숨기기"

#, fuzzy
#~ msgid "Time Stamp"
#~ msgstr "타임스탬프"

#, fuzzy
#~ msgid "field name"
#~ msgstr "필드 이름:"

#, fuzzy
#~ msgid "reference field"
#~ msgstr "설정 (&P)"

#, fuzzy
#~ msgid "value field"
#~ msgstr "필드 이동"

#, fuzzy
#~ msgid "user defined field"
#~ msgstr "사용자 그리드"

#, fuzzy
#~ msgid "Add no connect"
#~ msgstr "미연결 플래그 추가"

#, fuzzy
#~ msgid "Add lines"
#~ msgstr "선 추가"

#~ msgid "Add bus to bus entry"
#~ msgstr "버스에 버스 추가"

#, fuzzy
#~ msgid "Add sheet"
#~ msgstr "시트 추가"

#, fuzzy
#~ msgid "Add component"
#~ msgstr "컴포넌트 추가"

#, fuzzy
#~ msgid "Add power"
#~ msgstr "전원 추가"

#, fuzzy
#~ msgid "Library:Symbol"
#~ msgstr "라이브러리: "

#, fuzzy
#~ msgid "Show &grid"
#~ msgstr "그리드 보이기"

#, fuzzy
#~ msgid "New schematic"
#~ msgstr "새 회로도 (&S)"

#, fuzzy
#~ msgid "Save (all sheets)"
#~ msgstr "모두 저장"

#, fuzzy
#~ msgid "Edit Page settings"
#~ msgstr "페이지 설정"

#, fuzzy
#~ msgid "Leave sheet"
#~ msgstr "시트 나가기"

#, fuzzy
#~ msgid "Generate netlist"
#~ msgstr "일반 설정"

#, fuzzy
#~ msgid "View symbol documents"
#~ msgstr "컴포넌트 문서 보기"

#, fuzzy
#~ msgid "Open Eeschema manual"
#~ msgstr "설정 저장 (&S)"

#, fuzzy
#~ msgid "&About Eeschema"
#~ msgstr "EESchema 종료"

#, fuzzy
#~ msgid "About Eeschema schematic designer"
#~ msgstr "EESchema (회로도 에디터)"

#, fuzzy
#~ msgid "Symbol Library Browser -- %s"
#~ msgstr "라이브러리 브라우저"

#, fuzzy
#~ msgid "&New Library..."
#~ msgstr "새 라이브러리"

#, fuzzy
#~ msgid "&Add Library..."
#~ msgstr "라이브러리"

#, fuzzy
#~ msgid "New Sy&mbol..."
#~ msgstr "전원 심볼"

#, fuzzy
#~ msgid "E&xport Symbol..."
#~ msgstr "전원 심볼"

#~ msgid "Zoom "
#~ msgstr "확대"

#, fuzzy
#~ msgid "Toggle High Contrast Mode"
#~ msgstr "고대비 모드 표시"

#, fuzzy
#~ msgid "DCodes Display Mode"
#~ msgstr "3D 표시"

#, fuzzy
#~ msgid "Gerbview Hotkeys"
#~ msgstr "GERBVIEW 정보"

#, fuzzy
#~ msgid "Open a recently opened Gerber file"
#~ msgstr "화면을 지운 후 거버 파일 열기"

#~ msgid "&Close"
#~ msgstr "닫기 (&C)"

#, fuzzy
#~ msgid "Zoom to fit"
#~ msgstr "확대"

#, fuzzy
#~ msgid "Display &Polar Coordinates"
#~ msgstr "좌표 보이기"

#, fuzzy
#~ msgid "Show &DCodes"
#~ msgstr "D-Codes 보이기"

#, fuzzy
#~ msgid "Show Normal Mode"
#~ msgstr "3D 모드로 보드 보이기"

#, fuzzy
#~ msgid "Show layers in normal mode"
#~ msgstr "패드 채움 모드 보이기"

#, fuzzy
#~ msgid "Show Stacked Mode"
#~ msgstr "트랙 채움 모드 보이기"

#, fuzzy
#~ msgid "Show layers in stacked mode"
#~ msgstr "패드 채움 모드 보이기"

#, fuzzy
#~ msgid "Show Transparency Mode"
#~ msgstr "트랙 스케치 모드 보이기"

#, fuzzy
#~ msgid "Gerbview &Manual"
#~ msgstr "GERBVIEW 정보"

#~ msgid "Clear all layers"
#~ msgstr "모든 레이어 지우기"

#, fuzzy
#~ msgid "Enable high contrast display mode"
#~ msgstr "고대비 모드 표시"

#, fuzzy
#~ msgid "Show flashed items in fill mode"
#~ msgstr "패드 채움 모드 보이기"

#, fuzzy
#~ msgid "Show lines in fill mode"
#~ msgstr "패드 채움 모드 보이기"

#, fuzzy
#~ msgid "Show polygons in fill mode"
#~ msgstr "패드 채움 모드 보이기"

#~ msgid " OK\n"
#~ msgstr " OK\n"

#, fuzzy
#~ msgid " >>Error\n"
#~ msgstr "에러"

#, fuzzy
#~ msgid "Refresh Project Tree"
#~ msgstr "프로젝트 목록 새로 고침"

#, fuzzy
#~ msgid "Run Eeschema"
#~ msgstr "EESchema 종료"

#, fuzzy
#~ msgid "Run LibEdit"
#~ msgstr "핀 편집"

#, fuzzy
#~ msgid "Run FpEditor"
#~ msgstr "Module 에디터"

#, fuzzy
#~ msgid "Run Gerbview"
#~ msgstr "GERBVIEW 종료"

#, fuzzy
#~ msgid "Run PcbCalculator"
#~ msgstr "시뮬레이터 실행 (&R)"

#, fuzzy
#~ msgid "Run PlEditor"
#~ msgstr "Module 에디터"

#, fuzzy
#~ msgid "Open Project"
#~ msgstr "프로젝트 열기 (&O)"

#~ msgid "&New"
#~ msgstr "새 파일 (&N)"

#, fuzzy
#~ msgid "Create new project"
#~ msgstr "새 프로젝트 만들기"

#~ msgid "Refresh project tree"
#~ msgstr "프로젝트 목록 새로 고침"

#, fuzzy
#~ msgid "Configure footprint library table"
#~ msgstr "하나의 라이브러리 파일에 풋프린트 압축 또는 추가"

#, fuzzy
#~ msgid "&List Hotkeys"
#~ msgstr "D-Codes 목록 (&L)"

#~ msgid "&Browse"
#~ msgstr "찾아보기 (&B)"

#~ msgid "&Delete File"
#~ msgstr "파일 삭제 (&D)"

#, fuzzy
#~ msgid "Do you really want to delete \"%s\""
#~ msgstr "다음을 정말 삭제하시겠습니까: "

#, fuzzy
#~ msgid "Page 1 option:"
#~ msgstr "패드 설정"

#, fuzzy
#~ msgid "Not on page 1"
#~ msgstr "페이지에 맞추기"

#, fuzzy
#~ msgid "Vertical align:"
#~ msgstr "세로쓰기"

#, fuzzy
#~ msgid "Origin:"
#~ msgstr "드릴 원점:"

#, fuzzy
#~ msgid "Place Item"
#~ msgstr "노드 설치"

#, fuzzy
#~ msgid "Move Start Point"
#~ msgstr "핀 이동"

#, fuzzy
#~ msgid "Save current page layout design file"
#~ msgstr "현재 로드된 라이브러리를 디스크에 저장 (파일 업데이트)"

#, fuzzy
#~ msgid "Print Pre&view..."
#~ msgstr "미리 보기 (&V)"

#, fuzzy
#~ msgid "&Background Black"
#~ msgstr "백그라운드 색상"

#, fuzzy
#~ msgid "Hide &Grid"
#~ msgstr "사용자 그리드"

#, fuzzy
#~ msgid "&Line..."
#~ msgstr "선"

#, fuzzy
#~ msgid "&Rectangle..."
#~ msgstr "사각형 추가"

#, fuzzy
#~ msgid "&Text..."
#~ msgstr "텍스트"

#, fuzzy
#~ msgid "Open the Page Layout Editor Manual"
#~ msgstr "텍스트 에디터로 열기 (&O)"

#, fuzzy
#~ msgid "Add Line..."
#~ msgstr "선 추가"

#, fuzzy
#~ msgid "Add Text..."
#~ msgstr "텍스트 추가"

#, fuzzy
#~ msgid "Selection Clarification"
#~ msgstr "레이어쌍 선택"

#, fuzzy
#~ msgid "Page settings"
#~ msgstr "페이지 설정"

#, fuzzy
#~ msgid "Auto-place selected components"
#~ msgstr "컴포넌트 삭제: "

#, fuzzy
#~ msgid "Footprint not selected"
#~ msgstr "네트가 선택되지 않았습니다."

#~ msgid "Pad not selected"
#~ msgstr "패드가 선택되지 않았습니다."

#~ msgid "No memory for autorouting"
#~ msgstr "자동 배선을 위한 메모리가 부족합니다."

#, fuzzy
#~ msgid "No footprint found!"
#~ msgstr "컴포넌트를 찾을 수 없습니다."

#~ msgid "Abort routing?"
#~ msgstr "배선을 중지하시겠습니까?"

#, fuzzy
#~ msgid "Block Operation"
#~ msgstr "트랙 작업 (&T)"

#, fuzzy
#~ msgid "Change symbol path \"%s:%s\" to \"%s\"."
#~ msgstr "새 풋프린트 추가"

#, fuzzy
#~ msgid "Checking netlist symbol footprint \"%s:%s:%s\"."
#~ msgstr "새 풋프린트 추가"

#, fuzzy
#~ msgid "Cannot add new symbol %s due to missing footprint %s."
#~ msgstr "새 풋프린트 추가"

#, fuzzy
#~ msgid "Symbol %s pad %s not found in footprint %s.\n"
#~ msgstr "컴포넌트 %s: 라이브러리에서 %s 풋프린트를 찾을 수 없습니다."

#, fuzzy
#~ msgid "Netlist Path"
#~ msgstr "네트리스트:"

#, fuzzy
#~ msgid "Insert"
#~ msgstr "표준+삽입"

#~ msgid "Virtual"
#~ msgstr "가상"

#, fuzzy
#~ msgid "No 3D shape"
#~ msgstr "3D 형상:"

#, fuzzy
#~ msgid "<no reference>"
#~ msgstr "모듈 레퍼런스:"

#, fuzzy
#~ msgid "NC Name"
#~ msgstr "네트 이름"

#, fuzzy
#~ msgid "NC Clearance"
#~ msgstr "유격"

#, fuzzy
#~ msgid "NC Width"
#~ msgstr "두께"

#, fuzzy
#~ msgid "NC Via Size"
#~ msgstr "비아 크기"

#, fuzzy
#~ msgid "NC Via Drill"
#~ msgstr "비아 드릴"

#, fuzzy
#~ msgid "Segments"
#~ msgstr "세그먼트"

#, fuzzy
#~ msgid "(Keepout)"
#~ msgstr "보존"

#, fuzzy
#~ msgid "Delete NET?"
#~ msgstr "네트를 삭제하시겠습니까?"

#, fuzzy
#~ msgid "Import Settings..."
#~ msgstr "색상 설정..."

#, fuzzy
#~ msgid "Delete &dangling tracks"
#~ msgstr "트랙 삭제"

#, fuzzy
#~ msgid "Cleaning Options"
#~ msgstr "정리 설정"

#, fuzzy
#~ msgid "List Unconnected"
#~ msgstr "미연결 목록"

#, fuzzy
#~ msgid "Report file \"%s\" created"
#~ msgstr "만들기 중 에러"

#, fuzzy
#~ msgid "Create report file:"
#~ msgstr "새 파일 만들기:"

#, fuzzy
#~ msgid "Enable writing report to this file"
#~ msgstr "네트리스트 파일을 만들 수 없습니다."

#, fuzzy
#~ msgid "Problems / Markers (%d)"
#~ msgstr "마커 삭제"

#, fuzzy
#~ msgid "Library reference:"
#~ msgstr "새 라이브러리"

#~ msgid "Marker found"
#~ msgstr "마커를 찾았습니다."

#~ msgid "Find Marker"
#~ msgstr "마커 찾기"

#, fuzzy
#~ msgid "Filter items by parent footprint identifier:"
#~ msgstr "풋프린트 필터"

#, fuzzy
#~ msgid "No footprints."
#~ msgstr "풋프린트 이동"

#, fuzzy
#~ msgid "No duplicate."
#~ msgstr "중복"

#, fuzzy
#~ msgid "No extra footprints."
#~ msgstr "풋프린트 이동"

#~ msgid "Not in Netlist:"
#~ msgstr "네트리스트에 없음:"

#, fuzzy
#~ msgid "Re-associate footprints by reference"
#~ msgstr "풋프린트 레퍼런스"

#, fuzzy
#~ msgid "Delete extra footprints"
#~ msgstr "풋프린트 이동"

#, fuzzy
#~ msgid "Delete single-pad nets"
#~ msgstr "핀 시트 삭제"

#, fuzzy
#~ msgid "%s, rotated %.1f deg"
#~ msgstr "호 %.1f 도"

#, fuzzy
#~ msgid "Shape offset X:"
#~ msgstr "형상 옵셋:"

#, fuzzy
#~ msgid "Shape offset Y:"
#~ msgstr "형상 옵셋:"

#, fuzzy
#~ msgid "side and rotation"
#~ msgstr "영역 회전"

#, fuzzy
#~ msgid "Show pad in outline mode"
#~ msgstr "패드 채움 모드 보이기"

#, fuzzy
#~ msgid "Default line width constrained."
#~ msgstr "기본 선 굵기"

#, fuzzy
#~ msgid "Plot footprint references"
#~ msgstr "풋프린트 레퍼런스"

#, fuzzy
#~ msgid "&Reference:"
#~ msgstr "레퍼런스:"

#, fuzzy
#~ msgid "V&alue:"
#~ msgstr "값:"

#, fuzzy
#~ msgid "Legacy Toolset Routing Options"
#~ msgstr "핀 설정"

#, fuzzy
#~ msgid "Auto-delete old tracks"
#~ msgstr "이전 트랙 자동 삭제 기능 사용"

#, fuzzy
#~ msgid "&Use double segmented tracks"
#~ msgstr "더블 세그먼트 트랙"

#, fuzzy
#~ msgid "PCB thickness:"
#~ msgstr "그리드 (인치):"

#, fuzzy
#~ msgid "Mask_Back_layer"
#~ msgstr "Draft layer"

#, fuzzy
#~ msgid "Eco1_layer"
#~ msgstr "Comp layer"

#, fuzzy
#~ msgid "Eco2_layer"
#~ msgstr "Comp layer"

#, fuzzy
#~ msgid "Comments_layer"
#~ msgstr "Comments "

#, fuzzy
#~ msgid "Drawings_layer"
#~ msgstr "Drawings "

#, fuzzy
#~ msgid "dPair Width"
#~ msgstr "기본 선 굵기"

#, fuzzy
#~ msgid "Track clearances"
#~ msgstr "마스크 유격"

#, fuzzy
#~ msgid "Track too close to pad"
#~ msgstr "트랙 및 비아"

#, fuzzy
#~ msgid "Track too close to via"
#~ msgstr "트랙 및 비아"

#, fuzzy
#~ msgid "Via too close to track"
#~ msgstr "새 트랙"

#, fuzzy
#~ msgid "Track too close to copper area"
#~ msgstr "그래픽은 커퍼 레이어에 추가할 수 없습니다."

#, fuzzy
#~ msgid "Pad too close to pad"
#~ msgstr "클립보드로 3D 이미지 복사"

#, fuzzy
#~ msgid "Track width too small"
#~ msgstr "트랙 두께"

#, fuzzy
#~ msgid "Footprint %s found, but it is locked"
#~ msgstr "%s 풋프린트를 찾았습니다. 그러나 잠겨 있습니다"

#, fuzzy
#~ msgid "Add tracks"
#~ msgstr "트랙 추가"

#, fuzzy
#~ msgid "Add footprint"
#~ msgstr "새 풋프린트 추가"

#, fuzzy
#~ msgid "Warning: zone display is OFF!!!"
#~ msgstr "경고: 표시 영역 비활성!!!"

#, fuzzy
#~ msgid "Adjust zero"
#~ msgstr "영점 조정"

#, fuzzy
#~ msgid "Adjust grid origin"
#~ msgstr "사용자 그리드 설정"

#~ msgid "Add graphic arc"
#~ msgstr "그래픽 호 추가"

#~ msgid "Add graphic circle"
#~ msgstr "그래픽 원 추가"

#~ msgid "Copper layer global delete not allowed!"
#~ msgstr "커퍼 레이어는 전체를 삭제할 수 없습니다!"

#, fuzzy
#~ msgid "Delete everything on layer %s?"
#~ msgstr "드로우 레이어 삭제"

#, fuzzy
#~ msgid "Segs Count"
#~ msgstr "변환"

#, fuzzy
#~ msgid "Warning: unable to create backup file \"%s\""
#~ msgstr "경고: 백업 파일을 만들 수 없습니다."

#, fuzzy
#~ msgid "Backup file: \"%s\""
#~ msgstr "백업 파일:"

#, fuzzy
#~ msgid "Duplicate Block (shift + drag mouse)"
#~ msgstr "블록 삭제 (Shift+Ctrl+드래그)"

#~ msgid "Mirror Block (alt + drag mouse)"
#~ msgstr "블록 미러 (Alt+마우스 드래그)"

#~ msgid "Rotate Block (ctrl + drag mouse)"
#~ msgstr "블록 회전 (Ctrl+드래그)"

#~ msgid "Delete Block (shift+ctrl + drag mouse)"
#~ msgstr "블록 삭제 (Shift+Ctrl+드래그)"

#, fuzzy
#~ msgid "Move Block Exactly..."
#~ msgstr "블록 이동"

#, fuzzy
#~ msgid "Transform Footprint"
#~ msgstr "풋프린트"

#~ msgid "Move Pad"
#~ msgstr "패드 이동"

#, fuzzy
#~ msgid "Delete Pad"
#~ msgstr "패드 삭제"

#, fuzzy
#~ msgid "Duplicate Pad"
#~ msgstr "중복"

#, fuzzy
#~ msgid "End Edge"
#~ msgstr "에지 마침"

#, fuzzy
#~ msgid "Global Changes"
#~ msgstr "변경 없음"

#, fuzzy
#~ msgid "Change Body Items Width"
#~ msgstr "항목 바꾸기"

#, fuzzy
#~ msgid "Change Body Items Layer..."
#~ msgstr "항목 바꾸기"

#~ msgid "Place anchor"
#~ msgstr "앵커 설치"

#, fuzzy
#~ msgid "Cannot delete REFERENCE!"
#~ msgstr "텍스트는 레퍼런스입니다!"

#, fuzzy
#~ msgid "OK to delete footprint \"%s\" in library \"%s\""
#~ msgstr "%s 라이브러리 안의 %s 모듈이 삭제됩니다."

#, fuzzy
#~ msgid "Footprint already exists on board."
#~ msgstr "%s 라이브러리의 %s 컴포넌트가 삭제되었습니다."

#, fuzzy
#~ msgid "&Create Footprint from Wizard..."
#~ msgstr "풋프린트 압축 만들기"

#, fuzzy
#~ msgid "&Edit Footprint"
#~ msgstr "풋프린트"

#, fuzzy
#~ msgid "E&xport Footprint..."
#~ msgstr "풋프린트"

#, fuzzy
#~ msgid "Show footprint in 3D viewer"
#~ msgstr "3D 모드로 보드 보이기"

#, fuzzy
#~ msgid "Find components and text in current loaded board"
#~ msgstr "컴포넌트 및 텍스트 찾기 (Ctrl F)"

#, fuzzy
#~ msgid "Delete Track Segment"
#~ msgstr "세그먼트 삭제"

#, fuzzy
#~ msgid "Add New Track"
#~ msgstr "트랙 추가"

#, fuzzy
#~ msgid "Select Layer and Add Through Via"
#~ msgstr "비아 레이어쌍 선택"

#, fuzzy
#~ msgid "Add MicroVia"
#~ msgstr "마이어 추가"

#, fuzzy
#~ msgid "Add Blind/Buried Via"
#~ msgstr "숨은 비아"

#, fuzzy
#~ msgid "Drag Track Keep Slope"
#~ msgstr "세그먼트 드래그, 기울기 유지"

#, fuzzy
#~ msgid "Edit with Footprint Editor"
#~ msgstr "텍스트 에디터로 편집 (&E)"

#, fuzzy
#~ msgid "Flip Item"
#~ msgstr "항목 찾기"

#, fuzzy
#~ msgid "Move Item Exactly"
#~ msgstr "텍스트 이동"

#, fuzzy
#~ msgid "Lock/Unlock Footprint"
#~ msgstr "풋프린트"

#, fuzzy
#~ msgid "Place DXF"
#~ msgstr "노드 설치"

#, fuzzy
#~ msgid "Select Single Track"
#~ msgstr "단일 페이지"

#, fuzzy
#~ msgid "Select Connected Tracks"
#~ msgstr "미연결 트랙 삭제:"

#, fuzzy
#~ msgid "Routing Options"
#~ msgstr "사각형 설정"

#, fuzzy
#~ msgid "Custom Track/Via Size"
#~ msgstr "트랙 및 비아 크기"

#, fuzzy
#~ msgid "Not Handled Items"
#~ msgstr "회전 -"

#, fuzzy
#~ msgid "Export current footprint to a file"
#~ msgstr "현재 드로잉 내보내기"

#, fuzzy
#~ msgid "Print current footprint"
#~ msgstr "현재 프린터로 인쇄"

#, fuzzy
#~ msgid "Redo last action"
#~ msgstr "마지막 수정 되돌리기"

#, fuzzy
#~ msgid "Edit default pad properties"
#~ msgstr "부품 속성 편집"

#, fuzzy
#~ msgid "Footprint &Library Browser"
#~ msgstr "라이브러리 브라우저"

#, fuzzy
#~ msgid "&3D Viewer"
#~ msgstr "3D 뷰어"

#, fuzzy
#~ msgid "Grid &Settings..."
#~ msgstr "패드 설정"

#, fuzzy
#~ msgid "Sketch Footprint &Edges"
#~ msgstr "풋프린트 삭제"

#, fuzzy
#~ msgid "Sketch Footprint Te&xt"
#~ msgstr "풋프린트 텍스트"

#, fuzzy
#~ msgid "Select how items are displayed"
#~ msgstr "항목 표시 방법 선택"

#, fuzzy
#~ msgid "&High Contrast Mode"
#~ msgstr "고대비 모드 표시"

#, fuzzy
#~ msgid "Use high contrast display mode"
#~ msgstr "고대비 모드 표시"

#, fuzzy
#~ msgid "&Pad"
#~ msgstr "패드 채움 (&P)"

#, fuzzy
#~ msgid "&Text"
#~ msgstr "텍스트"

#~ msgid "Add graphic text"
#~ msgstr "그래픽 텍스트 추가"

#, fuzzy
#~ msgid "&Line"
#~ msgstr "선"

#, fuzzy
#~ msgid "&Polygon"
#~ msgstr "다각형:"

#, fuzzy
#~ msgid "Add graphic polygon"
#~ msgstr "그래픽 선 또는 다각형 추가"

#, fuzzy
#~ msgid "A&nchor"
#~ msgstr "앵커"

#, fuzzy
#~ msgid "&Grid Origin"
#~ msgstr "드릴 원점:"

#, fuzzy
#~ msgid "&Tune Track Length"
#~ msgstr "트랙 마침 (end)"

#, fuzzy
#~ msgid "&List Nets"
#~ msgstr "네트 목록:"

#, fuzzy
#~ msgid "View list of nets with names and IDs"
#~ msgstr "네트 목록 (이름 및 아이디)"

#, fuzzy
#~ msgid "Perform design rules check"
#~ msgstr "PCB DRC"

#, fuzzy
#~ msgid "&Footprint"
#~ msgstr "풋프린트"

#, fuzzy
#~ msgid "Add via"
#~ msgstr "패드 추가"

#, fuzzy
#~ msgid "&Zone"
#~ msgstr "영역"

#, fuzzy
#~ msgid "Add filled zone"
#~ msgstr "영역 추가"

#, fuzzy
#~ msgid "Add text on copper layers or graphic text"
#~ msgstr "커퍼 레이어 텍스트 포함"

#, fuzzy
#~ msgid "&Dimension"
#~ msgstr "치수 (&D)"

#, fuzzy
#~ msgid "&Autoplace selected components"
#~ msgstr "컴포넌트 삭제: "

#, fuzzy
#~ msgid "Fill &All Zones"
#~ msgstr "영역 채우기"

#, fuzzy
#~ msgid "Fill all zones on the board"
#~ msgstr "영역 채우기"

#, fuzzy
#~ msgid "&Unfill All Zones"
#~ msgstr "영역 채우기"

#, fuzzy
#~ msgid "Clean stubs, vias, delete break points or unconnected tracks"
#~ msgstr "스터브, 비아, 브레이크 포인트 지우기"

#, fuzzy
#~ msgid "Do not show filled areas in zones"
#~ msgstr "영역 숨기기"

#, fuzzy
#~ msgid "Create new board"
#~ msgstr "만들기 에러 "

#, fuzzy
#~ msgid "Open existing board"
#~ msgstr "보드 열기"

#~ msgid "Save current board"
#~ msgstr "현재 보드 저장"

#, fuzzy
#~ msgid "Sa&ve As..."
#~ msgstr "다른 이름으로 저장 (&S)..."

#, fuzzy
#~ msgid "Save copy of the current board"
#~ msgstr "현재 보드 저장"

#, fuzzy
#~ msgid "Clear board and get previous backup version of board"
#~ msgstr "이전 보드 삭제 후 이전 버전 보드 열기"

#~ msgid "Export board"
#~ msgstr "보드 내보내기"

#, fuzzy
#~ msgid "&Footprint (.rpt) Report..."
#~ msgstr "풋프린트 텍스트"

#, fuzzy
#~ msgid "Plot board in HPGL, PostScript or Gerber RS-274X format)"
#~ msgstr "플로트 (HPLG, Postscript 또는 Gerber 형식)"

#, fuzzy
#~ msgid "Archive or add all footprints in library file"
#~ msgstr "하나의 라이브러리 파일에 풋프린트 압축 또는 추가"

#, fuzzy
#~ msgid "Close Pcbnew"
#~ msgstr "PCBNEW 실행"

#, fuzzy
#~ msgid "Export GenCAD format"
#~ msgstr "GenCAD 형식으로 내보내기"

#, fuzzy
#~ msgid "STEP export"
#~ msgstr "내보내기"

#, fuzzy
#~ msgid "Only one pad for this footprint."
#~ msgstr "모듈에 패드가 한 개밖에 없습니다."

#~ msgid "Unable to drag this segment: too many segments connected"
#~ msgstr ""
#~ "이 세그먼트를 드래그 할 수 없습니다: 너무 많은 세그먼트가 연결되어 있습니"
#~ "다."

#~ msgid "Add Gap"
#~ msgstr "간격 추가"

#, fuzzy
#~ msgid "Dimension not allowed on Copper or Edge Cut layers"
#~ msgstr "치수는 커퍼 레이어에 추가할 수 없습니다."

#, fuzzy
#~ msgid "Delete All Drawings on Layer"
#~ msgstr "드로잉 삭제"

#, fuzzy
#~ msgid "Delete Last Corner"
#~ msgstr "레이어 삭제"

#, fuzzy
#~ msgid "Get and Move Footprint..."
#~ msgstr "풋프린트 이동"

#, fuzzy
#~ msgid "Select Working Layer..."
#~ msgstr "작업 레이어 선택"

#~ msgid "Select Track Width"
#~ msgstr "트랙 두께 선택"

#~ msgid "Drag Via"
#~ msgstr "비아 드래그"

#, fuzzy
#~ msgid "Drag Segments, Keep Slope"
#~ msgstr "세그먼트 드래그, 기울기 유지"

#~ msgid "Drag Segment"
#~ msgstr "세그먼트 드래그"

#~ msgid "Place Node"
#~ msgstr "노드 설치"

#, fuzzy
#~ msgid "Place Micro Via"
#~ msgstr "비아 설치 (V)"

#, fuzzy
#~ msgid "Change Via Size and Drill"
#~ msgstr "드릴 바꾸기"

#, fuzzy
#~ msgid "Change Segment Width"
#~ msgstr "두께 바꾸기"

#~ msgid "Delete Track"
#~ msgstr "트랙 삭제"

#~ msgid "Delete Net"
#~ msgstr "네트 삭제"

#, fuzzy
#~ msgid "Set Track and Via Sizes..."
#~ msgstr "트랙 및 비아 크기"

#~ msgid "Set Flags"
#~ msgstr "플래그 설정"

#~ msgid "Locked: No"
#~ msgstr "잠김: 아니오"

#~ msgid "Track Locked: Yes"
#~ msgstr "트랙 잠김: 예"

#~ msgid "Track Locked: No"
#~ msgstr "트랙 잠김: 아니오"

#~ msgid "Net Locked: Yes"
#~ msgstr "네트 잠김: 예"

#~ msgid "Net Locked: No"
#~ msgstr "네트 잠김: 아니오"

#, fuzzy
#~ msgid "Place Edge Outline"
#~ msgstr "에지 설치"

#, fuzzy
#~ msgid "Place Corner"
#~ msgstr "노드 설치"

#, fuzzy
#~ msgid "Place Zone"
#~ msgstr "노드 설치"

#, fuzzy
#~ msgid "Delete Corner"
#~ msgstr "레이어 삭제"

#, fuzzy
#~ msgid "Drag Outline Segment"
#~ msgstr "세그먼트 드래그"

#, fuzzy
#~ msgid "Move Zone"
#~ msgstr "영역 이동"

#, fuzzy
#~ msgid "Delete Zone Outline"
#~ msgstr "영역 삭제"

#~ msgid "Drag Pad"
#~ msgstr "패드 드래그"

#, fuzzy
#~ msgid "Auto Width"
#~ msgstr "두께 설정"

#, fuzzy
#~ msgid "Use Netclass Values"
#~ msgstr "네트 이름 사용"

#, fuzzy
#~ msgid "Display rectangular coordinates"
#~ msgstr "좌표 보이기"

#, fuzzy
#~ msgid "Show outlines in filled mode"
#~ msgstr "패드 채움 모드 보이기"

#, fuzzy
#~ msgid "Show outlines in sketch mode"
#~ msgstr "패드 스케치 모드 보이기"

#, fuzzy
#~ msgid "Show texts in filled mode"
#~ msgstr "패드 채움 모드 보이기"

#, fuzzy
#~ msgid "Show texts in sketch mode"
#~ msgstr "패드 스케치 모드 보이기"

#, fuzzy
#~ msgid "PCB Cursor"
#~ msgstr "커서"

#, fuzzy
#~ msgid "Added a track"
#~ msgstr "트랙 추가"

#, fuzzy
#~ msgid "Route Track"
#~ msgstr "트랙 삭제"

#, fuzzy
#~ msgid "New footprint"
#~ msgstr "풋프린트 이동"

#, fuzzy
#~ msgid "Print footprint"
#~ msgstr "풋프린트 압축"

#, fuzzy
#~ msgid "Redo last undo command"
#~ msgstr "마지막 되돌리기 명령 취소"

#, fuzzy
#~ msgid "Default pad properties"
#~ msgstr "패드 속성"

#~ msgid "Display Polar Coord ON"
#~ msgstr "좌표 보이기 사용"

#~ msgid "Show Pads Sketch"
#~ msgstr "패드 스케치 보이기"

#~ msgid "Show Texts Sketch"
#~ msgstr "텍스트 스케치 보이기"

#~ msgid "Show Edges Sketch"
#~ msgstr "에지 스케치 보이기"

#, fuzzy
#~ msgid "Close footprint viewer"
#~ msgstr "풋프린트 압축 만들기"

#, fuzzy
#~ msgid "&Fit on Screen"
#~ msgstr "실크스크린에 패드 인쇄"

#, fuzzy
#~ msgid "3&D Viewer"
#~ msgstr "3D 뷰어"

#, fuzzy
#~ msgid "&About Pcbnew"
#~ msgstr "PCBNEW 실행"

#, fuzzy
#~ msgid "New board"
#~ msgstr "새 보드 (&N)"

#~ msgid "Plot (HPGL, PostScript, or GERBER format)"
#~ msgstr "플로트 (HPLG, Postscript 또는 Gerber 형식)"

#, fuzzy
#~ msgid "Open footprint editor"
#~ msgstr "풋프린트 필터"

#, fuzzy
#~ msgid "Open footprint viewer"
#~ msgstr "풋프린트 필터"

#, fuzzy
#~ msgid "Enable design rule checking"
#~ msgstr "PCB DRC"

#, fuzzy
#~ msgid "Display local ratsnest"
#~ msgstr "로컬 연결선 표시 (패드 또는 모듈)"

#, fuzzy
#~ msgid "Add footprints"
#~ msgstr "새 풋프린트 추가"

#, fuzzy
#~ msgid "Show vias in fill mode"
#~ msgstr "패드 채움 모드 보이기"

#, fuzzy
#~ msgid "High contrast display mode"
#~ msgstr "고대비 모드 표시"

#, fuzzy
#~ msgid "Place the footprint anchor"
#~ msgstr "풋프린트 압축 만들기"

#, fuzzy
#~ msgid "Add zone cutout"
#~ msgstr "영역 추가"

#, fuzzy
#~ msgid "Add similar zone"
#~ msgstr "영역 추가"

#, fuzzy
#~ msgid "Edit Activate"
#~ msgstr "비아 편집"

#, fuzzy
#~ msgid "Copy selected content to clipboard"
#~ msgstr "클립보드로 3D 이미지 복사"

#, fuzzy
#~ msgid "Add pads"
#~ msgstr "패드 추가"

#, fuzzy
#~ msgid "Create polynomial shape for microwave applications"
#~ msgstr "마이크로웨이브 어플리케이션용 지정 길이 다각형 만들기"

#, fuzzy
#~ msgid "Add Stub (Arc)"
#~ msgstr "스터브 추가"

#, fuzzy
#~ msgid "Paste content from clipboard"
#~ msgstr "클립보드로 플로트"

#, fuzzy
#~ msgid "Find Item..."
#~ msgstr "항목 찾기"

#, fuzzy
#~ msgid "Area: DRC outline error"
#~ msgstr "만들기 에러 "

#, fuzzy
#~ msgid "No entry selected"
#~ msgstr "레이어가 선택되지 않았습니다."

#, fuzzy
#~ msgid "Delete alias entry"
#~ msgstr "버스 삭제"

#, fuzzy
#~ msgid "Move alias up"
#~ msgstr "드로우 레이어 이동"

#, fuzzy
#~ msgid "Move alias down"
#~ msgstr "아래쪽으로 이동"

#, fuzzy
#~ msgid "Create zones of layer %s"
#~ msgstr "프로젝트 파일 만들기:"

#, fuzzy
#~ msgid "Silk Screen Color"
#~ msgstr "Silkscreen Copper"

#, fuzzy
#~ msgid "Custom User Grid"
#~ msgstr "사용자 그리드 설정"

#~ msgid "Block Rotate"
#~ msgstr "블록 회전"

#~ msgid "Block Mirror"
#~ msgstr "블록 미러"

#, fuzzy
#~ msgid "Edit selected path prefix"
#~ msgstr "선택된 부품 보기"

#, fuzzy
#~ msgid "Save and Exit"
#~ msgstr "크기 및 두께"

#, fuzzy
#~ msgid "Hotkeys Editor"
#~ msgstr "Module 에디터"

#, fuzzy
#~ msgid "Warning!"
#~ msgstr "경고"

#, fuzzy
#~ msgid "Select show icons in menus and icons sizes"
#~ msgstr "글꼴 및 글꼴 크기 선택"

#, fuzzy
#~ msgid "Size%s"
#~ msgstr "크기"

#~ msgid "Pos "
#~ msgstr "위치 "

#~ msgid "Y"
#~ msgstr " Y"

#, fuzzy
#~ msgid "&Hotkeys Options"
#~ msgstr "플로트 설정:"

#, fuzzy
#~ msgid "Edit hotkeys configuration and preferences"
#~ msgstr "단축키 설정 파일:"

#, fuzzy
#~ msgid "KiCad project files (*.pro)|*."
#~ msgstr "프로젝트 파일 열기:"

#, fuzzy
#~ msgid "Gerber files (*.pho)|*."
#~ msgstr "거버 파일:"

#, fuzzy
#~ msgid "Failed to open file \"%s\""
#~ msgstr "파일 열기 실패"

#, fuzzy
#~ msgid "Edit Plugin File"
#~ msgstr "플러그인 파일:"

#, fuzzy
#~ msgid "Plugin Information:"
#~ msgstr "플러그인 파일:"

#, fuzzy
#~ msgid "Library Component Properties"
#~ msgstr "라이브러리 컴포넌트 속성"

#, fuzzy
#~ msgid "Alias List of %s"
#~ msgstr "(다음의 별명: "

#, fuzzy
#~ msgid "Properties for %s"
#~ msgstr "항목 속성: "

#, fuzzy
#~ msgid "Number of Units (max allowed %d)"
#~ msgstr "유닛 개수:"

#, fuzzy
#~ msgid "New Alias:"
#~ msgstr "새 별명:"

#, fuzzy
#~ msgid "Alias List:"
#~ msgstr "별명"

#, fuzzy
#~ msgid "Orientation (degrees):"
#~ msgstr "방향"

#~ msgid "Fields:"
#~ msgstr "필드"

#, fuzzy
#~ msgid "Delete optional field"
#~ msgstr "치수 삭제"

#, fuzzy
#~ msgid "Create new custom field"
#~ msgstr "프로젝트 파일 만들기:"

#, fuzzy
#~ msgid "Open in Browser"
#~ msgstr "라이브러리 브라우저"

#, fuzzy
#~ msgid "&Text:"
#~ msgstr "텍스트:"

#, fuzzy
#~ msgid "&Size:"
#~ msgstr "크기:"

#, fuzzy
#~ msgid "O&rientation:"
#~ msgstr "방향"

#, fuzzy
#~ msgid "S&hape:"
#~ msgstr "형상"

#, fuzzy
#~ msgid "Chip Name"
#~ msgstr "칩 이름:"

#, fuzzy
#~ msgid "Field Properties"
#~ msgstr "마이어 속성"

#, fuzzy
#~ msgid "&Part ID notation:"
#~ msgstr "형상 회전:"

#, fuzzy
#~ msgid "&Show grid"
#~ msgstr "그리드 보이기"

#, fuzzy
#~ msgid "Controls"
#~ msgstr "DRC 제어"

#, fuzzy
#~ msgid "De&lete"
#~ msgstr "삭제"

#, fuzzy
#~ msgid "Error list:"
#~ msgstr "히스토리 목록:"

#, fuzzy
#~ msgid "Initialize to Default"
#~ msgstr "비아홀 크기 초기화"

#, fuzzy
#~ msgid "&Width:"
#~ msgstr "두께"

#, fuzzy
#~ msgid "Sharing:"
#~ msgstr "정렬"

#, fuzzy
#~ msgid "Fill &foreground"
#~ msgstr "파일을 찾을 수 없습니다."

#, fuzzy
#~ msgid "Fill &background"
#~ msgstr "흰색"

#, fuzzy
#~ msgid "Pin Pos X:"
#~ msgstr "핀 설정"

#, fuzzy
#~ msgid "Pin Pos Y:"
#~ msgstr "핀 설정"

#, fuzzy
#~ msgid "Library Text Properties"
#~ msgstr "텍스트 속성"

#, fuzzy
#~ msgid "Default Netlist Filename:"
#~ msgstr "네트리스트 파일 열기 (&L)"

#, fuzzy
#~ msgid "General Options:"
#~ msgstr "일반 설정"

#, fuzzy
#~ msgid "Print options:"
#~ msgstr "핀 설정"

#, fuzzy
#~ msgid "Path Segment"
#~ msgstr "세그먼트 편집"

#, fuzzy
#~ msgid "Save and Load"
#~ msgstr "보드 저장"

#, fuzzy
#~ msgid "History"
#~ msgstr "히스토리 목록:"

#, fuzzy
#~ msgid "Save All Libraries"
#~ msgstr ""
#~ "\n"
#~ "모든 라이브러리를 탐색하시겠습니까?"

#, fuzzy
#~ msgid "&Save Symbol"
#~ msgstr "[%s]에 심볼 저장"

#, fuzzy
#~ msgid "Save All &Libraries"
#~ msgstr ""
#~ "\n"
#~ "모든 라이브러리를 탐색하시겠습니까?"

#, fuzzy
#~ msgid "Symbol Library Editor - "
#~ msgstr "라이브러리 에디터 실행"

#, fuzzy
#~ msgid "Edit Field %s"
#~ msgstr "필드 편집"

#, fuzzy
#~ msgid "Library &Browser"
#~ msgstr "라이브러리 브라우저"

#, fuzzy
#~ msgid "General &Options"
#~ msgstr "일반 설정"

#, fuzzy
#~ msgid "Create S&VG File..."
#~ msgstr "SVG 파일 만들기"

#, fuzzy
#~ msgid "Create a new empty symbol"
#~ msgstr "새 네트리스트 만들기"

#, fuzzy
#~ msgid "Export the current symbol"
#~ msgstr "현재 드로잉 내보내기"

#, fuzzy
#~ msgid "&Fields..."
#~ msgstr "필드"

#, fuzzy
#~ msgid "General &Options..."
#~ msgstr "일반 설정"

#, fuzzy
#~ msgid "Vert."
#~ msgstr "꼭지점"

#, fuzzy
#~ msgid "Horiz."
#~ msgstr "가로"

#, fuzzy
#~ msgid "value"
#~ msgstr "값"

#, fuzzy
#~ msgid "Deselect current tool"
#~ msgstr "현재 툴 선택 해제"

#, fuzzy
#~ msgid "Save current symbol"
#~ msgstr "현재 보드 저장"

#, fuzzy
#~ msgid "Import symbol"
#~ msgstr "심볼 드로잉 가져오기"

#, fuzzy
#~ msgid "Export symbol"
#~ msgstr "심볼 드로잉 내보내기"

#, fuzzy
#~ msgid "Library Browser"
#~ msgstr "라이브러리 브라우저"

#, fuzzy
#~ msgid "Revert Library"
#~ msgstr "새 라이브러리"

#, fuzzy
#~ msgid "Remove Symbol"
#~ msgstr "전원 심볼"

#, fuzzy
#~ msgid "Cut Symbol"
#~ msgstr "전원 심볼"

#~ msgid "No layer selected"
#~ msgstr "레이어가 선택되지 않았습니다."

#~ msgid "There was a problem printing"
#~ msgstr "인쇄에 문제가 있습니다!"

#, fuzzy
#~ msgid "Graphic layers:"
#~ msgstr "그래픽"

#~ msgid "Scale 0.5"
#~ msgstr "스케일 0.5"

#~ msgid "Scale 0.7"
#~ msgstr "스케일 0.7"

#, fuzzy
#~ msgid "Approximate scale 1"
#~ msgstr "근사 스케일 1"

#, fuzzy
#~ msgid "Accurate scale 1"
#~ msgstr "정밀 스케일 1"

#~ msgid "Scale 1.4"
#~ msgstr "스케일 1.4"

#~ msgid "Scale 2"
#~ msgstr "스케일 2"

#~ msgid "Scale 3"
#~ msgstr "스케일 3"

#~ msgid "Scale 4"
#~ msgstr "스케일 4"

#, fuzzy
#~ msgid "X scale:"
#~ msgstr "자동 스케일"

#, fuzzy
#~ msgid "Y scale:"
#~ msgstr "자동 스케일"

#~ msgid "Set Y scale adjust for exact scale plotting"
#~ msgstr "정밀 스케일 플로트용 Y 스케일 설정"

#, fuzzy
#~ msgid "Full size without page limits"
#~ msgstr "페이지 경계 보이기"

#, fuzzy
#~ msgid "Page Borders"
#~ msgstr "보드 저장"

#~ msgid "Lines:"
#~ msgstr "선"

#~ msgid "Polygons:"
#~ msgstr "다각형:"

#~ msgid "&Options"
#~ msgstr "설정 (&O)"

#, fuzzy
#~ msgid "Set options to draw items"
#~ msgstr "컴포넌트 선택 (%d 항목)"

#, fuzzy
#~ msgid "Set &Text Editor..."
#~ msgstr "텍스트 에디터"

#, fuzzy
#~ msgid "Select your preferred text editor"
#~ msgstr "사용자 에디터 선택"

#~ msgid "&Miscellaneous"
#~ msgstr "기타 (&M)"

#, fuzzy
#~ msgid "&Set Text Editor..."
#~ msgstr "텍스트 에디터"

#, fuzzy
#~ msgid "Set your preferred text editor"
#~ msgstr "사용자 에디터 선택"

#, fuzzy
#~ msgid "&Favorite PDF Viewer"
#~ msgstr "지정 PDF 뷰어"

#, fuzzy
#~ msgid "Use favorite PDF viewer"
#~ msgstr "지정 PDF 뷰어"

#, fuzzy
#~ msgid "Set &PDF Viewer..."
#~ msgstr "PDF 뷰어 선택"

#, fuzzy
#~ msgid "Set favorite PDF viewer"
#~ msgstr "지정 PDF 뷰어"

#, fuzzy
#~ msgid "&PDF Viewer"
#~ msgstr "3D 뷰어"

#, fuzzy
#~ msgid "PDF viewer preferences"
#~ msgstr "설정 파일 저장:"

#, fuzzy
#~ msgid "You must choose a PDF viewer before using this option."
#~ msgstr "이 설정은 사용 전에 먼저 PDF 뷰어를 선택해야 합니다."

#~ msgid "Footprints NOT LOCKED will be moved"
#~ msgstr "잠기지 않은 풋프린트도 이동됩니다."

#~ msgid "Footprints NOT PLACED will be moved"
#~ msgstr "배치되지 않은 풋프린트도 이동됩니다."

#, fuzzy
#~ msgid "No PCB edge found, unknown board size!"
#~ msgstr "PCB 에지가 없습니다. 보드 크기를 알 수 없습니다."

#~ msgid "Cols"
#~ msgstr "열"

#~ msgid "Cells."
#~ msgstr "셀"

#, fuzzy
#~ msgid "OK to abort?"
#~ msgstr "중지하시겠습니까?"

#, fuzzy
#~ msgid "Component \"%s\" pad \"%s\" not found in footprint \"%s\"\n"
#~ msgstr "컴포넌트 %s: 라이브러리에서 %s 풋프린트를 찾을 수 없습니다."

#~ msgid "TimeStamp"
#~ msgstr "타임스탬프"

#, fuzzy
#~ msgid "Plot: \"%s\" OK."
#~ msgstr "플로트: %s\n"

#, fuzzy
#~ msgid "Print SVG Options:"
#~ msgstr "핀 설정"

#, fuzzy
#~ msgid "Display:"
#~ msgstr "표시"

#, fuzzy
#~ msgid "Hidden net filter:"
#~ msgstr "방향 필터"

#, fuzzy
#~ msgid "Settings:"
#~ msgstr "패드 설정"

#, fuzzy
#~ msgid "Default pad connection:"
#~ msgstr "연결 삭제"

#, fuzzy
#~ msgid "THT thermal"
#~ msgstr "써멀"

#, fuzzy
#~ msgid "Fill mode:"
#~ msgstr "영역 채우기"

#, fuzzy
#~ msgid "Arbitrary"
#~ msgstr "라이브러리"

#, fuzzy
#~ msgid "H, V, and 45 deg only"
#~ msgstr "수평, 수직 및 45도"

#, fuzzy
#~ msgid "Via Dia"
#~ msgstr "비아 드릴"

#, fuzzy
#~ msgid "uVia Dia"
#~ msgstr "비아 드릴"

#, fuzzy
#~ msgid "Net Classes Editor"
#~ msgstr "에디터 선택 (&S)"

#, fuzzy
#~ msgid "Routing Options:"
#~ msgstr "플로트 설정:"

#, fuzzy
#~ msgid "Custom Via Sizes:"
#~ msgstr "비아 크기"

#, fuzzy
#~ msgid "Via 1"
#~ msgstr "비아 %.1f"

#, fuzzy
#~ msgid "Via 2"
#~ msgstr "비아 %.1f"

#, fuzzy
#~ msgid "Via 3"
#~ msgstr "비아 %.3f"

#, fuzzy
#~ msgid "Via 4"
#~ msgstr "비아 %.1f"

#, fuzzy
#~ msgid "Via 5"
#~ msgstr "비아 %.1f"

#, fuzzy
#~ msgid "Via 6"
#~ msgstr "비아 %.1f"

#, fuzzy
#~ msgid "Via 7"
#~ msgstr "비아 %.1f"

#, fuzzy
#~ msgid "Via 8"
#~ msgstr "비아 %.1f"

#, fuzzy
#~ msgid "Via 9"
#~ msgstr "비아 %.1f"

#, fuzzy
#~ msgid "Via 10"
#~ msgstr "비아 %.1f"

#, fuzzy
#~ msgid "Via 11"
#~ msgstr "비아 %.1f"

#, fuzzy
#~ msgid "Via 12"
#~ msgstr "비아 %.1f"

#, fuzzy
#~ msgid "Custom Track Widths:"
#~ msgstr "트랙 두께"

#, fuzzy
#~ msgid "Track 1"
#~ msgstr "트랙"

#, fuzzy
#~ msgid "Track 2"
#~ msgstr "트랙"

#, fuzzy
#~ msgid "Track 3"
#~ msgstr "트랙"

#, fuzzy
#~ msgid "Track 4"
#~ msgstr "트랙"

#, fuzzy
#~ msgid "Track 5"
#~ msgstr "트랙"

#, fuzzy
#~ msgid "Track 6"
#~ msgstr "트랙"

#, fuzzy
#~ msgid "Track 7"
#~ msgstr "트랙"

#, fuzzy
#~ msgid "Track 8"
#~ msgstr "트랙"

#, fuzzy
#~ msgid "Track 9"
#~ msgstr "트랙"

#, fuzzy
#~ msgid "Track 10"
#~ msgstr "트랙 %.1f"

#, fuzzy
#~ msgid "Track 11"
#~ msgstr "트랙 %.1f"

#, fuzzy
#~ msgid "Track 12"
#~ msgstr "트랙 %.1f"

#, fuzzy
#~ msgid "Global Design Rules"
#~ msgstr "전체 삭제"

#, fuzzy
#~ msgid "Design Rules Editor"
#~ msgstr "Module 에디터 열기"

#~ msgid "New track"
#~ msgstr "새 트랙"

#, fuzzy
#~ msgid "Delete every marker"
#~ msgstr "마커 삭제"

#, fuzzy
#~ msgid "Delete Current Marker"
#~ msgstr "현재 레이어 삭제"

#, fuzzy
#~ msgid "Marker count:"
#~ msgstr "마커를 찾았습니다."

#, fuzzy
#~ msgid "Edit 3D file name"
#~ msgstr "보드 파일명:"

#, fuzzy
#~ msgid "Local Settings:"
#~ msgstr "패드 설정"

#, fuzzy
#~ msgid "3D Shape Name:"
#~ msgstr "3D 형상 이름:"

#~ msgid "Add 3D Shape"
#~ msgstr "3D 형상 추가"

#~ msgid "Remove 3D Shape"
#~ msgstr "3D 형상 제거"

#, fuzzy
#~ msgid "Edit Filename"
#~ msgstr "파일 이름:"

#, fuzzy
#~ msgid "Edit 3D Shape Name"
#~ msgstr "3D 형상 이름:"

#, fuzzy
#~ msgid "Document link:"
#~ msgstr "문서 파일: "

#, fuzzy
#~ msgid "Footprint name in library:"
#~ msgstr "풋프린트 이름:"

#, fuzzy
#~ msgid "3D Shape Names:"
#~ msgstr "3D 형상 이름:"

#, fuzzy
#~ msgid "Modify module text"
#~ msgstr "모듈 텍스트"

#, fuzzy
#~ msgid "File \"%s\" created\n"
#~ msgstr "만들기 실패"

#, fuzzy
#~ msgid "** Could not create file \"%s\" ***\n"
#~ msgstr "%s 파일을 만들 수 없습니다."

#, fuzzy
#~ msgid "No footprints!"
#~ msgstr "풋프린트 이동"

#, fuzzy
#~ msgid "%s current footprint (%s)"
#~ msgstr "새 풋프린트 추가"

#, fuzzy
#~ msgid "Append"
#~ msgstr "보드 추가"

#, fuzzy
#~ msgid "Append a blank row"
#~ msgstr "보드 추가"

#, fuzzy
#~ msgid "Pcbnew Error"
#~ msgstr "PCBNEW 정보"

#, fuzzy
#~ msgid "Default Via Drill:"
#~ msgstr "기본 비아 드릴"

#, fuzzy
#~ msgid "&Auto save (minutes):"
#~ msgstr "자동 저장 (분)"

#, fuzzy
#~ msgid "&Show ratsnest"
#~ msgstr "연결선 보이기"

#, fuzzy
#~ msgid "Show the full ratsnest."
#~ msgstr "모듈 연결선 보이기"

#, fuzzy
#~ msgid "General Settings"
#~ msgstr "일반 설정"

#~ msgid "History list:"
#~ msgstr "히스토리 목록:"

#, fuzzy
#~ msgid "Search by Keyword"
#~ msgstr "키워드 검색"

#~ msgid "List All"
#~ msgstr "모든 목록"

#, fuzzy
#~ msgid "Set All Tracks and Vias to Netclass value"
#~ msgstr "트랙 및 비아 크기 모두 편집"

#, fuzzy
#~ msgid "Current Settings:"
#~ msgstr "페이지 설정"

#, fuzzy
#~ msgid "Current NetClass:"
#~ msgstr "현재 필드: "

#, fuzzy
#~ msgid "Track size"
#~ msgstr "트랙"

#, fuzzy
#~ msgid "Via drill"
#~ msgstr "비아 드릴"

#, fuzzy
#~ msgid "Global Edition Option:"
#~ msgstr "플로트 설정:"

#, fuzzy
#~ msgid "Global Edition of Tracks and Vias"
#~ msgstr "트랙 및 비아 모두 편집"

#~ msgid "Pad Filter :"
#~ msgstr "패드 필터"

#, fuzzy
#~ msgid "Item thickness:"
#~ msgstr "찾을 항목:"

#, fuzzy
#~ msgid "Default thickness:"
#~ msgstr "기본값"

#, fuzzy
#~ msgid "Graphic segment width:"
#~ msgstr "그래픽 세그먼트 두께"

#, fuzzy
#~ msgid "Copper text thickness:"
#~ msgstr "커퍼 텍스트 두께"

#, fuzzy
#~ msgid "Edge width:"
#~ msgstr "보드 에지 두께"

#, fuzzy
#~ msgid "Text and Drawings"
#~ msgstr "텍스트 및 드로잉"

#, fuzzy
#~ msgid "Pads Mask Clearance"
#~ msgstr "마스크 유격"

#, fuzzy
#~ msgid "&Text line width:"
#~ msgstr "텍스트 모듈 두께"

#, fuzzy
#~ msgid "Text &height:"
#~ msgstr "텍스트 에디터"

#, fuzzy
#~ msgid "Text &width:"
#~ msgstr "텍스트 방향"

#, fuzzy
#~ msgid "Footprint Editor Options"
#~ msgstr "풋프린트 회전"

#, fuzzy
#~ msgid "Move vector X:"
#~ msgstr "사각형 이동"

#, fuzzy
#~ msgid "Move vector Y:"
#~ msgstr "사각형 이동"

#, fuzzy
#~ msgid "Current position"
#~ msgstr "현재 시트"

#, fuzzy
#~ msgid "Override default footprint anchor with:"
#~ msgstr "풋프린트 압축 만들기"

#, fuzzy
#~ msgid "Footprint center"
#~ msgstr "풋프린트 필터"

#~ msgid "Timestamp"
#~ msgstr "타임스탬프"

#~ msgid "Keep"
#~ msgstr "보존"

#, fuzzy
#~ msgid "Exchange Footprint:"
#~ msgstr "풋프린트 압축"

#, fuzzy
#~ msgid "Single Pad Nets:"
#~ msgstr "단일 페이지"

#, fuzzy
#~ msgid "Read Current Netlist"
#~ msgstr "네트리스트 읽기"

#, fuzzy
#~ msgid "Silent mode"
#~ msgstr "인쇄 모드"

#~ msgid "Any"
#~ msgstr "모두"

#, fuzzy
#~ msgid "H, V and 45 deg"
#~ msgstr "수평, 수직 및 45도"

#, fuzzy
#~ msgid "Zone Edge Orientation:"
#~ msgstr "영역 에지 방향"

#, fuzzy
#~ msgid "Polygon:"
#~ msgstr "다각형:"

#, fuzzy
#~ msgid "No footprint"
#~ msgstr "풋프린트 이동"

#, fuzzy
#~ msgid "polygon"
#~ msgstr "다각형:"

#, fuzzy
#~ msgid "Net pad clearance:"
#~ msgstr "마스크 유격"

#, fuzzy
#~ msgid "Import Primitives"
#~ msgstr "핀 시트 가져오기"

#, fuzzy
#~ msgid "1.0"
#~ msgstr "180"

#, fuzzy
#~ msgid "Orientation (deg):"
#~ msgstr "방향"

#, fuzzy
#~ msgid "val"
#~ msgstr "타원형"

#, fuzzy
#~ msgid "Anchor position X:"
#~ msgstr "위치 기준"

#, fuzzy
#~ msgid "Select Anchor Position"
#~ msgstr "일반 설정 선택"

#~ msgid "Scale 1"
#~ msgstr "스케일 1"

#, fuzzy
#~ msgid "Scale 8"
#~ msgstr "스케일 1"

#, fuzzy
#~ msgid "Scale 16"
#~ msgstr "스케일 1"

#, fuzzy
#~ msgid "Approx. scale 1"
#~ msgstr "근사 스케일 1"

#, fuzzy
#~ msgid "Generic Options:"
#~ msgstr "일반 설정"

#, fuzzy
#~ msgid "Print frame ref"
#~ msgstr "용지 레퍼런스 인쇄"

#, fuzzy
#~ msgid "Pads Drill Options:"
#~ msgstr "패드 드릴 설정"

#, fuzzy
#~ msgid "1 Page per layer"
#~ msgstr "레이어마다 한 페이지씩"

#~ msgid "Page Print:"
#~ msgstr "페이지 인쇄"

#, fuzzy
#~ msgid "Select Footprint Library Folder"
#~ msgstr "작업 라이브러리 선택"

#, fuzzy
#~ msgid "Common:"
#~ msgstr "주석1:"

#, fuzzy
#~ msgid "Drill:"
#~ msgstr "드릴"

#, fuzzy
#~ msgid "Update complete"
#~ msgstr "업데이트 설정"

#, fuzzy
#~ msgid "Match footprints by:"
#~ msgstr "풋프린트 이동"

#, fuzzy
#~ msgid "Modified dimensions properties"
#~ msgstr "모듈 속성"

#, fuzzy
#~ msgid "Too small track width"
#~ msgstr "트랙 두께"

#, fuzzy
#~ msgid "New Width:"
#~ msgstr "두께 설정"

#, fuzzy
#~ msgid "Apply Pad Properties"
#~ msgstr "패드 속성"

#, fuzzy
#~ msgid "Set Line Width..."
#~ msgstr "기본 선 굵기"

#, fuzzy
#~ msgid "Library \"%s\" exists, OK to replace ?"
#~ msgstr "%s 파일은 이미 존재합니다. 덮어쓰시겠습니까?"

#~ msgid "Undo last edition"
#~ msgstr "마지막 수정 되돌리기"

#, fuzzy
#~ msgid "Delete Track or Footprint"
#~ msgstr "풋프린트 삭제"

#, fuzzy
#~ msgid "Select Trivial Connection"
#~ msgstr "연결 삭제"

#, fuzzy
#~ msgid "Create new library \"%s\"?"
#~ msgstr "새 디렉토리 만들기"

#, fuzzy
#~ msgid ""
#~ "\n"
#~ "Key words: "
#~ msgstr "키워드:"

#, fuzzy
#~ msgid "Set Acti&ve Library..."
#~ msgstr "활성 라이브러리가 없습니다."

#, fuzzy
#~ msgid "Select active library"
#~ msgstr "작업 라이브러리 선택"

#, fuzzy
#~ msgid "&Open Footprint..."
#~ msgstr "풋프린트"

#, fuzzy
#~ msgid "&Active Library..."
#~ msgstr "활성 라이브러리가 없습니다."

#, fuzzy
#~ msgid "Export active library"
#~ msgstr "활성 라이브러리가 없습니다."

#, fuzzy
#~ msgid "P&roperties..."
#~ msgstr "속성"

#, fuzzy
#~ msgid "&Library Browser"
#~ msgstr "라이브러리 브라우저"

#, fuzzy
#~ msgid "Te&xts and Drawings..."
#~ msgstr "텍스트 및 드로잉"

#, fuzzy
#~ msgid "Adjust dimensions for texts and drawings"
#~ msgstr "텍스트 및 드로잉 두께 설정"

#, fuzzy
#~ msgid "Push updated footprint through to current board"
#~ msgstr "현재 보드로 모듈 삽입"

#, fuzzy
#~ msgid "&Delete a Footprint in Active Library"
#~ msgstr "현재 라이브러리에서 부품 삭제"

#, fuzzy
#~ msgid "General &Settings..."
#~ msgstr "일반 설정"

#, fuzzy
#~ msgid "&Display Options..."
#~ msgstr "표시 설정 (&D)"

#, fuzzy
#~ msgid "&Setup"
#~ msgstr "설정 저장 (&S)"

#, fuzzy
#~ msgid "Enable and set layer properties"
#~ msgstr "라벨 속성"

#, fuzzy
#~ msgid "Open design rules editor"
#~ msgstr "Module 에디터 열기"

#, fuzzy
#~ msgid "Pads to &Mask Clearance..."
#~ msgstr "마스크 유격"

#, fuzzy
#~ msgid "&General Settings"
#~ msgstr "일반 설정 (&G)"

#, fuzzy
#~ msgid "Select general options for Pcbnew"
#~ msgstr "PCBNEW 일반 설정 선택"

#, fuzzy
#~ msgid "Set Footp&rint Field Sizes..."
#~ msgstr "풋프린트 필터"

#, fuzzy
#~ msgid "Global Spread and Place"
#~ msgstr "전체 이동 후 배치"

#, fuzzy
#~ msgid "Spread out All Footprints"
#~ msgstr "풋프린트 이동"

#, fuzzy
#~ msgid "Unlock All Footprints"
#~ msgstr "풋프린트"

#, fuzzy
#~ msgid "Lock All Footprints"
#~ msgstr "풋프린트"

#, fuzzy
#~ msgid "The item is locked. Do you want to continue?"
#~ msgstr ""
#~ "확장자를 바꾸면 파일 형식이 변경됩니다.\n"
#~ "그래도 계속 하시겠습니까?"

#, fuzzy
#~ msgid "Save footprint in active library"
#~ msgstr "하나의 라이브러리 파일에 풋프린트 압축 또는 추가"

#, fuzzy
#~ msgid "Create new library and save current footprint"
#~ msgstr "현재 부품을 저장할 새 라이브러리 만들기"

#, fuzzy
#~ msgid "Delete part from active library"
#~ msgstr "현재 라이브러리에서 부품 삭제"

#, fuzzy
#~ msgid "Import footprint"
#~ msgstr "부품 가져오기"

#, fuzzy
#~ msgid "Export footprint"
#~ msgstr "부품 내보내기"

#, fuzzy
#~ msgid "Trivial Connection"
#~ msgstr "연결 삭제"

#, fuzzy
#~ msgid "Selects whole copper connection."
#~ msgstr "연결 삭제"

#, fuzzy
#~ msgid "Whole Net"
#~ msgstr "네트가 아닙니다."

#, fuzzy
#~ msgid "Via "
#~ msgstr "비아 %.1f"

#, fuzzy
#~ msgid "Pad to die"
#~ msgstr "패드 크기"

#, fuzzy
#~ msgid "Default Value"
#~ msgstr "기본 비아 드릴"

#, fuzzy
#~ msgid "Default Fields"
#~ msgstr "필드 삭제"

#~ msgid "Delete Zones ?"
#~ msgstr "영역을 삭제하시겠습니까?"

#~ msgid "Delete Board edges ?"
#~ msgstr "보드 에지를 삭제하시겠습니까?"

#~ msgid "Delete draw items?"
#~ msgstr "드로잉 항목을 삭제하시겠습니까?"

#~ msgid "Delete Tracks?"
#~ msgstr "트랙을 삭제하시겠습니까?"

#~ msgid "Delete Modules?"
#~ msgstr "모듈을 삭제하시겠습니까?"

#~ msgid "Delete Pcb Texts"
#~ msgstr "PCB 텍스트를 삭제하시겠습니까?"

#~ msgid "Add Drawing"
#~ msgstr "드로잉 추가"

#~ msgid "File <%s> not found"
#~ msgstr "<%s> 파일을 찾을 수 없습니다."

#~ msgid "Module [%s] not found"
#~ msgstr "[%s] 모듈을 찾을 수 없습니다."

#~ msgid " No modules to archive!"
#~ msgstr " 압축할 모듈이 없습니다!"

#~ msgid " added in "
#~ msgstr "이(가) 다음에 추가되었습니다: "

#~ msgid "Module Editor (lib: "
#~ msgstr "Module Editor (lib: "

#~ msgid "Library exists "
#~ msgstr "라이브러리가 이미 존재합니다: "

#~ msgid "Move Module  (M)"
#~ msgstr "모듈 이동  (M)"

#~ msgid "Drag Module  (G)"
#~ msgstr "모듈 드래그  (G)"

#~ msgid "Rotate Module +  (R)"
#~ msgstr "모듈 회전 +  (R)"

#~ msgid "Rotate Module -"
#~ msgstr "모듈 회전 -"

#~ msgid "Invert Module  (S)"
#~ msgstr "모듈 반전  (S)"

#~ msgid "Track %.3f"
#~ msgstr "트랙 %.3f"

#~ msgid "Copy Block (shift + drag mouse)"
#~ msgstr "블록 복사 (Shift+드래그)"

#~ msgid "Flip Block (alt + drag mouse)"
#~ msgstr "블록 플립 (Alt+드래그)"

#~ msgid "Fix Module"
#~ msgstr "모듈 고정"

#~ msgid "Free Module"
#~ msgstr "모듈 풀림"

#~ msgid "Auto place Module"
#~ msgstr "자동 모듈 배치"

#~ msgid "Autoroute"
#~ msgstr "자동 배선"

#~ msgid "New Pad Settings"
#~ msgstr "새 패드 설정"

#~ msgid "Autoroute Pad"
#~ msgstr "자동 배선 패드"

#~ msgid "Autoroute Net"
#~ msgstr "자동 배선 네트"

#~ msgid "Move Text Mod."
#~ msgstr "텍스트 모듈 이동"

#~ msgid "Edit Text Mod."
#~ msgstr "텍스트 모듈 편집"

#~ msgid "Delete Text Mod."
#~ msgstr "텍스트 모듈 삭제"

#~ msgid "Move Drawing"
#~ msgstr "드로잉 이동"

#~ msgid "End edge zone"
#~ msgstr "에지 영역 마침"

#~ msgid "Delete edge zone"
#~ msgstr "에지 영역 삭제"

#~ msgid "Rotate Text"
#~ msgstr "텍스트 회전"

#~ msgid "Delete Text"
#~ msgstr "텍스트 삭제"

#~ msgid "Delete Mire"
#~ msgstr "마이어 삭제"

#~ msgid "Free All Modules"
#~ msgstr "모듈 모두 풀기"

#~ msgid "Fixe All Modules"
#~ msgstr "모듈 모두 고정"

#~ msgid "Move New Modules"
#~ msgstr "새 모듈 이동"

#~ msgid "Autoplace Next Module"
#~ msgstr "다음 모듈 자동 배치"

#~ msgid "Orient All Modules"
#~ msgstr "모듈 모두 방향 설정"

#~ msgid "Global Autoroute"
#~ msgstr "전체 자동 배선"

#~ msgid "Autoroute All Modules"
#~ msgstr "모듈 모두 자동 배선"

#~ msgid "Global AutoRouter"
#~ msgstr "전체 자동 배선기"

#~ msgid "Read Global AutoRouter Data"
#~ msgstr "전체 자동 배선 데이터 읽기"

#~ msgid "Export Via hole to alt value"
#~ msgstr "대체 비아홀 크기로 내보내기"

#~ msgid "Export via hole to others id vias"
#~ msgstr "다른 아이디 비아 크기로 내보내기"

#~ msgid "Edit ALL Vias (no track)"
#~ msgstr "비아 모두 편집 (트랙 제외)"

#~ msgid "Edit ALL Tracks (no via)"
#~ msgstr "트랙 모두 편집 (비아 제외)"

#~ msgid "Stub"
#~ msgstr "스터브"

#~ msgid "Arc Stub"
#~ msgstr "호 스터브"

#~ msgid " (inch):"
#~ msgstr " (인치)"

#~ msgid "Gap (mm):"
#~ msgstr "간격 (밀리미터):"

#~ msgid "Gap (inch):"
#~ msgstr "간격 (인치):"

#~ msgid "Scan Lib: %s"
#~ msgstr "라이브러리 검색: %s"

#~ msgid "Module <%s> not found"
#~ msgstr "<%s> 모듈을 찾을 수 없습니다."

#~ msgid "Module Editor: module modified!, Continue ?"
#~ msgstr "Module 에디터: 모듈이 변경되었습니다. 그래도 계속 하시겠습니까?"

#~ msgid "shape X"
#~ msgstr "x 모양"

#~ msgid "Mire Shape:"
#~ msgstr "마이어 모양"

#~ msgid "Read Netlist "
#~ msgstr "네트리스트 읽기"

#~ msgid "Cmp %s: Mismatch! module is [%s] and netlist said [%s]\n"
#~ msgstr ""
#~ "컴포넌트 %s: 불일치! %s 모듈과 [%s] 네트리스트가 일치하지 않습니다.\n"

#~ msgid "Module [%s]: Pad [%s] not found"
#~ msgstr "모듈 [%s]: [%s] 패드를 찾을 수 없습니다."

#~ msgid "No modules in NetList"
#~ msgstr "네트리스트에 모듈이 없습니다."

#~ msgid "Lack:"
#~ msgstr "부족:"

#~ msgid "File <%s> not found, use Netlist for lib module selection"
#~ msgstr ""
#~ "<%s> 파일을 찾을 수 없습니다. 라이브러리 모듈 선택에 네트리스트를 사용하십"
#~ "시오."

#~ msgid "Netlist Selection:"
#~ msgstr "네트리스트 선택:"

#~ msgid "Board modified, Save before exit ?"
#~ msgstr "보드가 변경되었습니다. 저장하시겠습니까?"

#~ msgid "DRC Off (Disable !!!), Currently: DRC is active"
#~ msgstr "DRC 해제 (사용 안 함 !!!), 현재 상태: DRC 활성"

#~ msgid "DRC On (Currently: DRC is inactive !!!)"
#~ msgstr "DRC 켬 (현재 상태: DRC 비활성 !!!)"

#~ msgid "Grid not show"
#~ msgstr "그리드 숨기기"

#~ msgid "General ratsnest not show"
#~ msgstr "일반 연결선 숨기기"

#~ msgid "Disable Auto Delete old Track"
#~ msgstr "이전 트랙 자동 삭제 기능 해제"

#~ msgid "Pcbnew is already running, Continue?"
#~ msgstr "PCBNEW는 이미 실행 중입니다. 그래도 계속 하시겠습니까?"

#~ msgid "New Board"
#~ msgstr "새 보드"

#~ msgid "Undelete"
#~ msgstr "되돌리기"

#~ msgid "Mode Module: Manual and Automatic Move or Place for modules"
#~ msgstr "모드 모듈: 수동 및 자동 이동 또는 배치"

#~ msgid "Mode Track and Autorouting"
#~ msgstr "모드 트랙 및 자동 배선"

#~ msgid "Drc OFF"
#~ msgstr "DRC 해제"

#~ msgid "Display Grid OFF"
#~ msgstr "그리드 표시 해제"

#~ msgid "Units = Inch"
#~ msgstr "단위 = 인치"

#~ msgid "Units = mm"
#~ msgstr "단위 = 밀리미터"

#~ msgid "Show General Ratsnest"
#~ msgstr "일반 연결선 보이기"

#~ msgid "Enable Auto Del Track"
#~ msgstr "트랙 자동 삭제 기능 사용"

#~ msgid ""
#~ "Display auxiliary vertical toolbar (tools for micro wave applications)\n"
#~ " This is a very experimental feature (under development)"
#~ msgstr ""
#~ "수직 툴바 보이기 (마이크로웨이브 어플리케이션 툴)\n"
#~ " 이 기능은 아직 개발 단계인 시험적인 기능입니다."

#~ msgid "Add modules"
#~ msgstr "모듈 추가"

#~ msgid "Add Mires"
#~ msgstr "마이어 추가"

#~ msgid "Spot min"
#~ msgstr "최소 점 크기"

#~ msgid "Pen Speed (cm/s)"
#~ msgstr "펜 속도 (센티미터/초):"

#~ msgid "Set pen speed in cm/s"
#~ msgstr "펜 속도 설정 (센티미터/초)"

#~ msgid "Pen Ovr"
#~ msgstr "펜 오버레이"

#~ msgid "Set plot overlay for filling"
#~ msgstr "채움 플로트 오버레이 설정"

#~ msgid "Enable/disable print/plot pads on Silkscreen layers"
#~ msgstr "실크스크린 레이어에 패드 인쇄/플로트 사용/해제"

#~ msgid "Always Print Pads"
#~ msgstr "항상 패드 인쇄"

#~ msgid "Enable/disable print/plot module value on Silkscreen layers"
#~ msgstr "실크스크린 레이어에 모듈값 인쇄/플로트 사용/해제"

#~ msgid "Enable/disable print/plot module reference on Silkscreen layers"
#~ msgstr "실크스크린 레이어에 모듈 레퍼런스 인쇄/플로트 사용/해제"

#~ msgid "Print other module texts"
#~ msgstr "기타 모듈 텍스트 인쇄"

#~ msgid "Enable/disable print/plot module field texts on Silkscreen layers"
#~ msgstr "실크스크린 레이어에 모듈 필드 인쇄/플로트 사용/해제"

#~ msgid "Force Print Invisible Texts"
#~ msgstr "숨은 텍스트 인쇄"

#~ msgid "Scale 1.5"
#~ msgstr "스케일 1.5"

#~ msgid "Scale Opt"
#~ msgstr "스케일 설정"

#~ msgid "Plot Mirror"
#~ msgstr "미러 플로트"

#~ msgid "Print/plot vias on mask layers. They are in this case not protected"
#~ msgstr "마스크 레이어 비아 인쇄/플로트. 현재 보호되지 않음."

#~ msgid "Org = Centre"
#~ msgstr "원점 = 가운데"

#~ msgid "Draw origin ( 0,0 )in on sheet center"
#~ msgstr "용지 가운데에 원점 (0,0) 설정"

#~ msgid "TextPCB properties"
#~ msgstr "텍스트 속성"

#~ msgid "unable to create file "
#~ msgstr "파일을 만들 수 없음"

#~ msgid "<%s> Not Found"
#~ msgstr "<%s>을(를) 찾을 수 없습니다."

#~ msgid "Adjust size,shape,layers... for Pads"
#~ msgstr "패드의 크기, 모양, 레이어 등 설정"

#~ msgid "On line doc"
#~ msgstr "온라인 문서"

#~ msgid "Pcbnew &About"
#~ msgstr "PCBNEW에 대하여 (&A)"

#~ msgid "&3D Display"
#~ msgstr "3D 표시 (&3)"

#~ msgid "Delete old Board and Load new Board"
#~ msgstr "이전 보드 삭제 후 새 보드 열기"

#~ msgid "Clear old PCB and init a new one"
#~ msgstr "이전 PCB 삭제 후 새 보드 초기화"

#~ msgid "P&rint"
#~ msgstr "인쇄 (&R)"

#~ msgid "&Plot"
#~ msgstr "플로트 (&P)"

#~ msgid "&Module report"
#~ msgstr "모듈 리포트 (&M)"

#~ msgid "E&xit"
#~ msgstr "종료 (&X)"

#~ msgid "Quit pcbnew"
#~ msgstr "PCBNEW 종료"

#~ msgid "&Libs and Dir"
#~ msgstr "라이브러리 및 디렉토리 (&L)"

#~ msgid "Setting Libraries, Directories and others..."
#~ msgstr "라이브러리, 디렉토리 등 설정"

#~ msgid "&Colors"
#~ msgstr "색상 (&C)"

#~ msgid "Select Colors and Display for PCB items"
#~ msgstr "PCB 항목 색상 선택 및 표시"

#~ msgid "Save options in current directory"
#~ msgstr "현재 디렉토리에 설정 저장"

#~ msgid "&Read Setup"
#~ msgstr "설정 읽기 (&R)"

#~ msgid "Read options from a selected config file"
#~ msgstr "선택된 파일로부터 설정 읽기"

#~ msgid "Adjust size and width for tracks, vias"
#~ msgstr "트랙, 비아 크기 및 두께 설정"

#~ msgid "Create &Modules Pos"
#~ msgstr "모듈 위치 만들기 (&M)"

#~ msgid "Gen Position modules file"
#~ msgstr "모듈 위치 파일 만들기"

#~ msgid "Create &Drill file"
#~ msgstr "드릴 파일 만들기 (&D)"

#~ msgid "Gen Drill (EXCELLON] file and/or Drill sheet"
#~ msgstr "드릴 파일 (EXCELLON) 및/또는 드릴 시트 만들기"

#~ msgid "Create &Cmp file"
#~ msgstr "컴포넌트 파일 만들기 (&C)"

#~ msgid "Recreate .cmp file for CvPcb"
#~ msgstr "CvPcb용 .cmp 파일 다시 만들기"

#~ msgid "Delete Tracks, Modules, Texts... on Board"
#~ msgstr "보드의 트랙, 모듈, 텍스트 등 삭제"

#~ msgid "Scale X"
#~ msgstr "X 스케일"

#~ msgid "Scale Y"
#~ msgstr "Y 스케일"

#~ msgid "Transform Module"
#~ msgstr "모듈 변환"

#~ msgid "Move edge"
#~ msgstr "에지 이동"

#~ msgid "Edit Width (Current)"
#~ msgstr "두께 편집 (현재)"

#~ msgid "Edit Width (All)"
#~ msgstr "두께 편집 (모두)"

#~ msgid "Edit Layer (Current)"
#~ msgstr "레이어 편집 (현재)"

#~ msgid "Edit Layer (All)"
#~ msgstr "레이어 편집 (모두)"

#~ msgid "Delete edge"
#~ msgstr "에지 삭제"

#~ msgid "Create temporary file: "
#~ msgstr "임시 파일 만들기"

#~ msgid "Lecture fichier de routage "
#~ msgstr "자동 배선 파일을 읽는 중: "

#~ msgid "Zone clearance value (mm):"
#~ msgstr "영역 유격값 (밀리미터):"

#~ msgid "New zone segment width: "
#~ msgstr "새 영역 세그먼트 두께: "

#~ msgid "Delete Current Zone Edges"
#~ msgstr "현재 영역 에지 삭제"

#~ msgid "Pad Cmp"
#~ msgstr "패드 컴포넌트"

#~ msgid "Text Module Cu"
#~ msgstr "텍스트 모듈 커퍼"

#~ msgid "Text Module Cmp"
#~ msgstr "텍스트 모듈 컴포넌트"

#~ msgid "Text Module invisible"
#~ msgstr "텍스트 모듈 숨기기"

#~ msgid "Show Noconnect"
#~ msgstr "미연결 보이기"

#~ msgid "Show Modules Cmp"
#~ msgstr "모듈 컴포넌트 보이기"

#~ msgid "Show Modules Cu"
#~ msgstr "모듈 커퍼 보이기"

#~ msgid "Exit"
#~ msgstr "닫기"

#~ msgid "Save Module in working library"
#~ msgstr "작업 라이브러리에 모듈 저장"

#~ msgid "New Module"
#~ msgstr "새 모듈"

#~ msgid "Replace module in current BOARD"
#~ msgstr "현재 보드의 모듈 대체"

#~ msgid "import module"
#~ msgstr "모듈 가져오기"

#~ msgid "export module"
#~ msgstr "모듈 내보내기"

#~ msgid "Grid %.1f"
#~ msgstr "그리드 %.1f"

#~ msgid "Grid %.3f"
#~ msgstr "그리드 %.3f"

#~ msgid "Exchange Modules"
#~ msgstr "모듈 교환"

#~ msgid "Change module"
#~ msgstr "모듈 바꾸기"

#~ msgid "Ch. same module+value"
#~ msgstr "동일한 모듈+값 바꾸기"

#~ msgid "Change all"
#~ msgstr "모두 바꾸기"

#~ msgid "Browse Libs modules"
#~ msgstr "라이브러리 모듈 찾아보기"

#~ msgid "Current Module"
#~ msgstr "현재 모듈"

#~ msgid "Change modules <%s> -> <%s> (val = %s)?"
#~ msgstr "모듈 바꾸기 <%s> -> <%s> (값 = %s)?"

#~ msgid "Change modules <%s> -> <%s> ?"
#~ msgstr "모듈 바꾸기 <%s> -> <%s> ?"

#~ msgid "Change ALL modules ?"
#~ msgstr "모듈을 모두 바꾸시겠습니까?"

#~ msgid "Change module %s (%s)  "
#~ msgstr "모듈 바꾸기 %s (%s)  "

#~ msgid "No Modules!"
#~ msgstr "모듈이 없습니다!"

#~ msgid "Display Polar Coord"
#~ msgstr "좌표 표시"

#~ msgid "Big"
#~ msgstr "큰 모양"

#~ msgid "Max Links:"
#~ msgstr "최대 연결수"

#~ msgid "Drc ON"
#~ msgstr "DRC 활성"

#~ msgid "Tracks Auto Del"
#~ msgstr "트랙 자동 삭제"

#~ msgid "Track 45 Only"
#~ msgstr "45도 트랙만"

#~ msgid "Segments 45 Only"
#~ msgstr "45도 세그먼트만"

#~ msgid "Auto PAN"
#~ msgstr "자동 화면 이동"

#~ msgid "Track Width: %s   Vias Size : %s"
#~ msgstr "트랙 두께: %s  비아 크기: %s"

#~ msgid "Include Modules"
#~ msgstr "모듈 포함"

#~ msgid "Track rotation"
#~ msgstr "트랙 회전"

#~ msgid "Block mirroring"
#~ msgstr "블록 미러"

#~ msgid "Zone mirroring"
#~ msgstr "영역 미러"

#~ msgid "Module copy"
#~ msgstr "모듈 복사"

#~ msgid "show"
#~ msgstr "보이기"

#~ msgid "Locate Pin %s (module %s)"
#~ msgstr "핀 배치 %s (모듈 %s)"

#~ msgid "Delete Texts"
#~ msgstr "텍스트 삭제"

#~ msgid "Delete Edges"
#~ msgstr "에지 삭제"

#~ msgid "Delete Modules"
#~ msgstr "모듈 삭제"

#~ msgid "Include AutoRouted Tracks"
#~ msgstr "자동 배선 트랙 포함"

#~ msgid "Files ext:"
#~ msgstr "파일 확장자"

#~ msgid "Del"
#~ msgstr "삭제"

#~ msgid "Lib Modules Dir:"
#~ msgstr "라이브러리 모듈 디렉토리:"

#~ msgid "Lib ext: "
#~ msgstr "라이브러리 확장자: "

#~ msgid "Net ext: "
#~ msgstr "네트 확장자: "

#~ msgid "Library exists! No Change"
#~ msgstr "라이브러리가 존재합니다! 변경되지 않았습니다."

#~ msgid "Goto Module Editor"
#~ msgstr "Module 에디터 실행"

#~ msgid "Doc"
#~ msgstr "문서"

#~ msgid "Componant"
#~ msgstr "Component"

#~ msgid "Orient (0.1 deg)"
#~ msgstr "방향 (0.1도):"

#~ msgid "Rot 90"
#~ msgstr "90도 회전"

#~ msgid "Rot 180"
#~ msgstr "180도 회전"

#~ msgid "Delete [%s]"
#~ msgstr "삭제 [%s]"

#~ msgid "Blind Via"
#~ msgstr "블라인드 비아"

#~ msgid ""
#~ "You have selected VIA Blind or VIA Buried\n"
#~ "WARNING: this feature is EXPERIMENTAL!!! Accept ?"
#~ msgstr ""
#~ "블라인드 또는 숨은 비아가 선택되었습니다.\n"
#~ "경고: 시험적인 기능입니다. 그래도 진행하시겠습니까?"

#~ msgid "New Width (1/10000\"):"
#~ msgstr "새 두께 (1/10000\"):"

#~ msgid "Add Modules"
#~ msgstr "모듈 추가"

#~ msgid "Segment is being edited"
#~ msgstr "세그먼트가 수정 중이었습니다."

#~ msgid "Delta"
#~ msgstr "증분값"

#~ msgid "Pad Drill"
#~ msgstr "패드 드릴"

#~ msgid "Pad Orient (0.1 deg)"
#~ msgstr "패드 방향 (0.1도):"

#~ msgid "COTATION"
#~ msgstr "치수"

#~ msgid "Module"
#~ msgstr "모듈"

#~ msgid "  Arc  "
#~ msgstr "  호  "

#~ msgid "NoConn"
#~ msgstr "미연결"

#~ msgid "Move Modules ?"
#~ msgstr "모듈을 이동하시겠습니까?"

#~ msgid "Autoplace modules: No boad edges detected, unable to place modules"
#~ msgstr "자동 배치 모듈: 보드 에지를 찾을 수 없어 모듈을 배치할 수 없습니다."

#~ msgid "Ok to set module orientation to %d degrees ?"
#~ msgstr "모듈 방향을 %d(으)로 설정하시겠습니까?"

#~ msgid "Loop"
#~ msgstr "루프"

#~ msgid "3D Frame already opened"
#~ msgstr "3D 프레임이 이미 열려 있습니다."

#~ msgid "KeyW: "
#~ msgstr "키워드: "

#~ msgid "RefP"
#~ msgstr "레퍼런스"

#~ msgid "X Pos"
#~ msgstr "X 위치"

#~ msgid "Y pos"
#~ msgstr "Y 위치"

#~ msgid "ViaDef"
#~ msgstr "비아 설정"

#~ msgid "Clean Null Segments"
#~ msgstr "널 세그먼트 지우기"

#~ msgid "Merge"
#~ msgstr "결합"

#~ msgid "Merge: "
#~ msgstr "결합:"

#~ msgid "NetCtr"
#~ msgstr "네트 제어"

#~ msgid "Pad Net Name :"
#~ msgstr "패드 네트 이름 :"

#~ msgid "Adhesive Copper"
#~ msgstr "Adhesive Copper"

#~ msgid ""
#~ "Unconnected:\n"
#~ "Pad @ %.4f,%.4f and\n"
#~ "Pad @ %.4f,%.4f\n"
#~ msgstr ""
#~ "미연결:\n"
#~ "패드 @ %.4f,%.4f 및\n"
#~ "패드 @ %.4f,%.4f\n"

#~ msgid "Active routes: %d\n"
#~ msgstr "배선 활성화: %d\n"

#~ msgid "OK! (No unconnect)\n"
#~ msgstr "양호! (미연결 없음)\n"

#~ msgid "** End Drc: %d errors **\n"
#~ msgstr "** DRC 마침: %d 에러 **\n"

#~ msgid "** End Drc: No Error **\n"
#~ msgstr "** DRC 마침: 에러 없음 **\n"

#~ msgid "SegmNb"
#~ msgstr "SegmNb"

#~ msgid "Track Err"
#~ msgstr "트랙 에러"

#~ msgid "Tst Tracks\n"
#~ msgstr "트랙 테스트\n"

#~ msgid "%d Err type %d sur PAD @ %d,%d\n"
#~ msgstr "%d 에러 형식 %d sur 패드 @ %d,%d\n"

#~ msgid "%d Err type %d: sur VIA @ %d,%d\n"
#~ msgstr "%d 에러 형식 %d: sur 비아 @ %d,%d\n"

#~ msgid "%d Err type %d: sur SEGMENT @ %d,%d\n"
#~ msgstr "%d 에러 형식 %d: sur 세그먼트 @ %d,%d\n"

#~ msgid "%d Err pad to pad (PAD @ %d,%d and PAD @ %d,%d\n"
#~ msgstr "%d 에러 패드-패드 (패드 @ %d,%d 및 패드 @ %d,%d\n"

#~ msgid "Edit All Via Sizes"
#~ msgstr "비아 크기 모두 편집"

#~ msgid "Text is VALUE!"
#~ msgstr "텍스트는 값입니다!"

#~ msgid "GenCAD file:"
#~ msgstr "GenCAD 파일:"

#~ msgid "Recovery file "
#~ msgstr "복구 파일 "

#~ msgid "Board Modified: Continue ?"
#~ msgstr "보드 변경됨: 그래도 계속 하시겠습니까?"

#~ msgid "Drill tools"
#~ msgstr "드릴 도구"

#~ msgid "3:3"
#~ msgstr "3:3"

#~ msgid "Drill Origine:"
#~ msgstr "드릴 원점"

#~ msgid "drill sheet (HPGL)"
#~ msgstr "드릴 시트 (HPGL)"

#~ msgid "drill sheet (PostScript)"
#~ msgstr "드릴 시트 (Postscript)"

#~ msgid "Drill Sheet:"
#~ msgstr "드릴 시트"

#~ msgid "Speed (cm/s)"
#~ msgstr "속도 (센티미터/초):"

#~ msgid "&Execute"
#~ msgstr "실행 (&E)"

#~ msgid "Unable to create file <%s>"
#~ msgstr "<%s> 파일을 만들 수 없습니다."

#~ msgid "Pads Global Edit"
#~ msgstr "패드 전체 편집"

#~ msgid "Change Module"
#~ msgstr "모듈 바꾸기"

#~ msgid "Change Id Modules"
#~ msgstr "모듈 아이디 바꾸기"

#~ msgid "Modules:"
#~ msgstr "모듈"

#~ msgid "Edges Module Width"
#~ msgstr "에지 모듈 두께"

#~ msgid "Text Module Size V"
#~ msgstr "텍스트 모듈 세로 크기"

#~ msgid "Text Module Size H"
#~ msgstr "텍스트 모듈 가로 크기"

#~ msgid "Module Edges:"
#~ msgstr "모듈 에지"

#~ msgid "Pads:"
#~ msgstr "패드"

#~ msgid "Show Pad NoConnect"
#~ msgstr "미연결 패드 보이기"

#~ msgid "Grid Size Units"
#~ msgstr "그리드 크기 단위"

#~ msgid "User Grid Size X"
#~ msgstr "사용자 그리드 크기 X:"

#~ msgid "User Grid Size Y"
#~ msgstr "사용자 그리드 크기 Y:"

#~ msgid "Bad Tracks Deletion:"
#~ msgstr "잘못된 트랙 삭제:"

#~ msgid "Exchange Module:"
#~ msgstr "모듈 교환:"

#~ msgid "Read"
#~ msgstr "읽기"

#~ msgid "Module Test"
#~ msgstr "모듈 테스트"

#~ msgid "This sheet has no data, cleanup aborted"
#~ msgstr "이 시트에 데이터가 없습니다. 비우기 중지됨"

#~ msgid "&3"
#~ msgstr "&3"

#~ msgid "&9"
#~ msgstr "&9"

#~ msgid "&10"
#~ msgstr "&10"

#~ msgid "&15"
#~ msgstr "&15"

#~ msgid "Parts per package"
#~ msgstr "패키지당 부품수"

#~ msgid "Show Pin Num"
#~ msgstr "핀 번호 보이기"

#~ msgid "Skew:"
#~ msgstr "스큐:"

#~ msgid "Sub Components (i.e. U2A, U2B ...)"
#~ msgstr "서브 컴포넌트 (예: U2A, U2B ...)"

#~ msgid "Hierachy Pins by Name"
#~ msgstr "이름에 의한 계층구조 핀"

#~ msgid "Launch list browser"
#~ msgstr "목록 브라우저 실행"

#~ msgid ""
#~ "\n"
#~ "#Glob labels ( order = Sheet Number )\n"
#~ msgstr ""
#~ "\n"
#~ "#전역 라벨 (정렬 = 시트 번호)\n"

#~ msgid ""
#~ "\n"
#~ "#Glob labels ( order = Alphab. )\n"
#~ msgstr ""
#~ "\n"
#~ "#전역 라벨 (정렬 = 알파벳)\n"

#~ msgid ""
#~ "\n"
#~ "#End List\n"
#~ msgstr ""
#~ "\n"
#~ "#목록 마침\n"

#~ msgid ""
#~ "\n"
#~ "#Cmp ( order = Reference )"
#~ msgstr ""
#~ "\n"
#~ "#컴포넌트 (정렬 = 레퍼런스)"

#~ msgid " (with SubCmp)"
#~ msgstr " (서브 컴포넌트 포함)"

#~ msgid "#End Cmp\n"
#~ msgstr "#컴포넌트 마침\n"

#~ msgid ""
#~ "\n"
#~ "#Cmp ( order = Value )"
#~ msgstr ""
#~ "\n"
#~ "#컴포넌트 (정렬 = 값)"

#~ msgid "> %-28.28s Global        (Sheet %.2d) pos: %3.3f, %3.3f\n"
#~ msgstr "> %-28.28s 전체        (시트 %.2d) 위치: %3.3f, %3.3f\n"

#~ msgid "> %-28.28s Sheet %-7.7s (Sheet %.2d) pos: %3.3f, %3.3f\n"
#~ msgstr "> %-28.28s 시트 %-7.7s (시트 %.2d) 위치: %3.3f, %3.3f\n"

#~ msgid "Previous Annotation will be deleted. Continue ?"
#~ msgstr "이전의 애노테이션은 삭제됩니다. 그래도 계속 하시겠습니까?"

#~ msgid "( unit %d)"
#~ msgstr "(유닛 %d)"

#~ msgid "Error item %s%s"
#~ msgstr "에러 항목 %s%s"

#~ msgid " unit %d and no more than %d parts"
#~ msgstr " 유닛 %d은(는) %d 부품 뿐입니다."

#~ msgid " (unit %d)"
#~ msgstr " (유닛 %d)"

#~ msgid "Normal (50 mils)"
#~ msgstr "표준 (50 밀)"

#~ msgid "Small (25 mils)"
#~ msgstr "세밀 (25 밀)"

#~ msgid "Very small (10 mils)"
#~ msgstr "매우 세밀 (10 밀)"

#~ msgid "Special (2 mils)"
#~ msgstr "스페셜2 (2 밀)"

#~ msgid "Special (1 mil)"
#~ msgstr "스페셜3 (1 밀)"

#~ msgid "Wires - Bus orient"
#~ msgstr "와이어 - 버스 방향"

#~ msgid "Auto increment params"
#~ msgstr "자동 인수 증가"

#~ msgid "Page Size A4"
#~ msgstr "용지 크기 A4"

#~ msgid "Page Size A"
#~ msgstr "용지 크기 A"

#~ msgid "B/W"
#~ msgstr "흑백 이미지"

#~ msgid "Plot Color:"
#~ msgstr "플로트 색상"

#~ msgid "&Plot CURRENT"
#~ msgstr "현재 화면 플로트 (&P)"

#~ msgid "Plot A&LL"
#~ msgstr "모두 플로트 (&L)"

#~ msgid "Messages :"
#~ msgstr "메시지:"

#~ msgid "-> Total Errors:  "
#~ msgstr "-> 총 에러수:  "

#~ msgid "-> Last Warnings: "
#~ msgstr "-> 마지막 경고: "

#~ msgid "-> Last Errors:   "
#~ msgstr "-> 마지막 에러:   "

#~ msgid "Write erc report"
#~ msgstr "ERC 리포트 작성"

#~ msgid "&Test Erc"
#~ msgstr "ERC 테스트 (&T)"

#~ msgid " Text : "
#~ msgstr " 텍스트"

#~ msgid "Page Size A3"
#~ msgstr "용지 크기 A3"

#~ msgid "Page Size A2"
#~ msgstr "용지 크기 A2"

#~ msgid "Page Size A0"
#~ msgstr "용지 크기 A0"

#~ msgid "Page Size B"
#~ msgstr "용지 크기 B"

#~ msgid "Page Size C"
#~ msgstr "용지 크기 C"

#~ msgid "Page Size D"
#~ msgstr "용지 크기 D"

#~ msgid "Page Size E"
#~ msgstr "용지 크기 E"

#~ msgid "Pen Width ( mils )"
#~ msgstr "펜 굵기 (밀):"

#~ msgid "Pen Speed ( cm/s )"
#~ msgstr "펜 속도 (센티미터/초):"

#~ msgid "Plot Offset X"
#~ msgstr "플로트 옵셋 X:"

#~ msgid "Plot Offset Y"
#~ msgstr "플로트 옵셋 Y:"

#~ msgid "&Accept Offset"
#~ msgstr "옵셋 확인 (&A)"

#~ msgid "** Plot End **\n"
#~ msgstr "** 플로트 마침 **\n"

#~ msgid "Plot  "
#~ msgstr "플로트"

#~ msgid "clock inv"
#~ msgstr "반전 클럭"

#~ msgid "low clock"
#~ msgstr "로우 클럭"

#~ msgid "low out"
#~ msgstr "로우 출력"

#~ msgid "Occupied by other pin, Continue ?"
#~ msgstr "다른 핀에서 사용하고 있습니다. 그래도 계속 하시겠습니까?"

#~ msgid "  Unit %d"
#~ msgstr "  유닛 %d"

#~ msgid "  Convert"
#~ msgstr "  변환"

#~ msgid "  Normal"
#~ msgstr "  표준"

#~ msgid "Push/Pop Hierarchy"
#~ msgstr "계층구조 보이기/숨기기"

#~ msgid "Add PinSheet"
#~ msgstr "핀 시트 추가"

#~ msgid "Add Component"
#~ msgstr "컴포넌트 추가"

#~ msgid "Delete SHEET!!"
#~ msgstr "시트 삭제!!"

#~ msgid "&Del Annotate"
#~ msgstr "애노테이트 삭제 (&D)"

#~ msgid "Pin Num :"
#~ msgstr "핀 번호:"

#~ msgid "No Draw"
#~ msgstr "숨기기"

#~ msgid "Pin Orient:"
#~ msgstr "핀 방향"

#~ msgid "Pin Shape:"
#~ msgstr "핀 모양"

#~ msgid "Bidi"
#~ msgstr "양방향"

#~ msgid "3 States"
#~ msgstr "3-스테이트"

#~ msgid "Find &Next Item (F5)"
#~ msgstr "다음 항목 찾기 (&N) (F5)"

#~ msgid "Next Marker (F5)"
#~ msgstr "다음 마커 (F5)"

#~ msgid "Find Cmp in &Lib"
#~ msgstr "라이브러리에서 컴포넌트 찾기"

#~ msgid "delete noconn"
#~ msgstr "미연결 삭제"

#~ msgid "delete Marker"
#~ msgstr "마커 삭제"

#~ msgid "End drawing"
#~ msgstr "드로잉 마침"

#~ msgid "Move Component   (M)"
#~ msgstr "컴포넌트 이동 (M)"

#~ msgid "Rotate +  (R)"
#~ msgstr "회전 +  (R)"

#~ msgid "Mirror --  (X)"
#~ msgstr "미러 --  (X)"

#~ msgid "Mirror ||  (Y)"
#~ msgstr "미러 ||  (Y)"

#~ msgid "Normal  (N)"
#~ msgstr "표준 (N)"

#~ msgid "Delete Component"
#~ msgstr "컴포넌트 삭제"

#~ msgid "Move Glabel"
#~ msgstr "전역 라벨 이동"

#~ msgid "Rotate GLabel  (R)"
#~ msgstr "전역 라벨 회전 (R)"

#~ msgid "Delete Glabel"
#~ msgstr "전역 라벨 삭제"

#~ msgid "Rotate Label  (R)"
#~ msgstr "라벨 회전 (R)"

#~ msgid "Rotate Text (R)"
#~ msgstr "텍스트 회전 (R)"

#~ msgid "End Bus"
#~ msgstr "버스 마침"

#~ msgid "Move PinSheet"
#~ msgstr "핀 시트 이동"

#~ msgid "Win. Zoom (Midd butt drag mouse)"
#~ msgstr "창 확대/축소 (가운데 버튼 드래그)"

#~ msgid "Drag Block (ctrl + drag mouse)"
#~ msgstr "블록 드래그 (Ctrl+드래그)"

#~ msgid "Del. Block (shift+ctrl + drag mouse)"
#~ msgstr "블록 삭제 (Shift+Ctrl+드래그)"

#~ msgid "&PcbNew"
#~ msgstr "&PCBNEW"

#~ msgid "&OrcadPcb2"
#~ msgstr "&OrcadPcb2"

#~ msgid "&CadStar"
#~ msgstr "&CadStar"

#~ msgid "NetList Formats:"
#~ msgstr "네트리스트 형식"

#~ msgid "Net file Ext: "
#~ msgstr "네트 파일 확장자: "

#~ msgid "Library file Ext: "
#~ msgstr "라이브러리 파일 확장자: "

#~ msgid "Schematic file Ext: "
#~ msgstr "회로도 파일 확장자: "

#~ msgid "Libraries:"
#~ msgstr "라이브러리:"

#~ msgid "Library files path:"
#~ msgstr "라이브러리 파일 경로:"

#~ msgid "Void"
#~ msgstr "채우지 않음"

#~ msgid "BgFilled"
#~ msgstr "백그라운드 채움"

#~ msgid "Pos"
#~ msgstr "위치 "

#~ msgid "Component [%s] not found!"
#~ msgstr "[%s] 컴포넌트를 찾을 수 없습니다!"

#~ msgid "No Field to move"
#~ msgstr "이동할 필드가 없습니다."

#~ msgid ""
#~ "Part is a POWER, value cannot be modified!\n"
#~ "You must create a new power"
#~ msgstr ""
#~ "전원 부품입니다. 값을 변경할 수 없습니다!\n"
#~ "새 전원을 만들어야 합니다."

#~ msgid "Reference needed !, No change"
#~ msgstr "레퍼런스가 없습니다! 변경되지 않았습니다."

#~ msgid "Value needed !, No change"
#~ msgstr "값이 없습니다! 변경되지 않았습니다."

#~ msgid "Pwr Symb"
#~ msgstr "전원 심볼"

#~ msgid "Val"
#~ msgstr "값"

#~ msgid "RefLib"
#~ msgstr "레퍼런스 라이브러리"

#~ msgid "Lib"
#~ msgstr "라이브러리"

#~ msgid "PinNum"
#~ msgstr "핀 번호"

#~ msgid " Part:   "
#~ msgstr " 부품:"

#~ msgid "Current Part not saved, continue ?"
#~ msgstr "현재 부품이 저장되지 않았습니다. 그래도 계속 하시겠습니까?"

#~ msgid "Ok to modify Library File "
#~ msgstr "다음 라이브러리 파일을 수정합니다: "

#~ msgid "Delete old component ?"
#~ msgstr "이전 컴포넌트를 삭제하시겠습니까?"

#~ msgid "Component %s exists, Change it ?"
#~ msgstr "%s 컴포넌트는 이미 존재합니다. 바꾸시겠습니까?"

#~ msgid "Pcb"
#~ msgstr "PCB"

#~ msgid "Fld1"
#~ msgstr "필드1"

#~ msgid "Fld2"
#~ msgstr "필드2"

#~ msgid "Fld3"
#~ msgstr "필드3"

#~ msgid "Fld4"
#~ msgstr "필드4"

#~ msgid "Fld5"
#~ msgstr "필드5"

#~ msgid "Fld6"
#~ msgstr "필드6"

#~ msgid "Fld7"
#~ msgstr "필드7"

#~ msgid "Fld8"
#~ msgstr "필드8"

#~ msgid "LibEdit: Part modified!, Continue ?"
#~ msgstr "LibEdit: 부품이 수정되었습니다. 그래도 계속 하시겠습니까?"

#~ msgid "Library %s modified!, Continue ?"
#~ msgstr "%s 라이브러리가 수정되었습니다. 그래도 계속 하시겠습니까?"

#~ msgid " Tst Pins OK!"
#~ msgstr "핀 테스트 양호!"

#~ msgid "Sheet %s (file %s) modified. Save it?"
#~ msgstr "%s 시트가 수정되었습니다 (%s 파일). 저장하시겠습니까?"

#~ msgid "go to library browse"
#~ msgstr "라이브러리 브라우저 실행"

#~ msgid "Netlist generation"
#~ msgstr "네트리스트 만들기"

#~ msgid "Bill of material and/or Crossreferences"
#~ msgstr "BOM 및/또는 크로스 레퍼런스"

#~ msgid "Hierarchy Push/Pop"
#~ msgstr "계층구조 보이기/숨기기"

#~ msgid "import glabel from sheet & create pinsheet"
#~ msgstr "시트로부터 전역 라벨 가져오기 및 핀 시트 만들기"

#~ msgid "Add graphic text (comment)"
#~ msgstr "그래픽 텍스트 (주석) 추가"

#~ msgid "File "
#~ msgstr "파일"

#~ msgid "Sheets"
#~ msgstr "시트"

#~ msgid "PinNam"
#~ msgstr "핀 이름"

#~ msgid "Body Bg"
#~ msgstr "보디 백그라운드"

#~ msgid "Erc Mark"
#~ msgstr "ERC 마크"

#~ msgid "File <"
#~ msgstr "<"

#~ msgid "> is empty!"
#~ msgstr "> 파일은 빈 파일입니다!"

#~ msgid "> is NOT EESCHEMA library!"
#~ msgstr "> 파일은 EESchema 라이브러리가 아닙니다!"

#~ msgid "> header read error"
#~ msgstr "> 라이브러리 헤더 읽기 에러"

#~ msgid "Clear Schematic Hierarchy (modified!)?"
#~ msgstr "회로도 계층구조를 지우시겠습니까? (수정됨!)"

#~ msgid ""
#~ "Ready\n"
#~ "Working dir: \n"
#~ msgstr ""
#~ "준비 완료\n"
#~ "작업 디렉토리: \n"

#~ msgid "File %s not found (new project ?)"
#~ msgstr "%s 파일을 찾을 수 없습니다. 새 프로젝트를 만드시겠습니까?"

#~ msgid "No FileName in SubSheet"
#~ msgstr "서브 시트에 파일 이름이 없습니다."

#~ msgid " is NOT EESchema file"
#~ msgstr "은(는) EESchema 파일이 아닙니다."

#~ msgid "Eeschema is already running, Continue?"
#~ msgstr "EESchema가 이미 실행 중입니다. 그래도 계속 하시겠습니까?"

#~ msgid "Warning Pin %s Unconnected"
#~ msgstr "경고: %s 핀이 연결되어 있지 않습니다."

#~ msgid "ERC control"
#~ msgstr "ERC 제어"

#~ msgid "ERC: %s (X= %2.3f inches, Y= %2.3f inches\n"
#~ msgstr "ERC: %s (X= %2.3f 인치, Y= %2.3f 인치\n"

#~ msgid ""
#~ "\n"
#~ " >> Errors ERC: %d\n"
#~ msgstr ""
#~ "\n"
#~ " >> ERC 에러: %d\n"

#~ msgid "Clear SubHierarchy ?"
#~ msgstr "서브 계층구조를 지우시겠습니까?"

#~ msgid "Marker found in "
#~ msgstr "마커를 다음에서 찾았습니다: "

#~ msgid "Marker Not Found"
#~ msgstr "마커를 찾을 수 없습니다."

#~ msgid " in lib "
#~ msgstr " 라이브러리: "

#~ msgid " found only in cache"
#~ msgstr "은(는) 캐시에서만 찾았습니다."

#~ msgid "0k"
#~ msgstr "확인"

#~ msgid ""
#~ "Note: this new library will be available only if it is loaded by "
#~ "eeschema\n"
#~ "Modify eeschema config if you want use it"
#~ msgstr ""
#~ "노트: 새 라이브러리는 EESchema에 의해서만 사용 가능합니다.\n"
#~ "사용 전 먼저 EESchema 설정을 수정하십시오."

#~ msgid "Failed to create archive lib file "
#~ msgstr "압축 라이브러리 파일 만들기 실패"

#~ msgid "Move Arc"
#~ msgstr "호 이동"

#~ msgid "Arc Delete"
#~ msgstr "호 삭제"

#~ msgid "Move Circle"
#~ msgstr "원 이동"

#~ msgid "Circle Delete"
#~ msgstr "원 삭제"

#~ msgid "Rect Delete"
#~ msgstr "사각형 삭제"

#~ msgid "Text Delete"
#~ msgstr "텍스트 삭제"

#~ msgid "Field Rotate"
#~ msgstr "필드 회전"

#~ msgid "Mirror Block (ctrl + drag mouse)"
#~ msgstr "블록 미러 (Ctrl+드래그)"

#~ msgid "No new text: no change"
#~ msgstr "새 텍스트 없음: 변경되지 않았습니다."

#~ msgid "Load a schematic project (Schematic, libraries...)"
#~ msgstr "프로젝트 파일 열기 (회로도, 라이브러리...)"

#~ msgid "Plotting in Postscript format"
#~ msgstr "Postscript 형식으로 플로팅"

#~ msgid "Plotting in HPGL format"
#~ msgstr "HPGL 형식으로 플로팅"

#~ msgid "Plot SVG"
#~ msgstr "SVG 플로트"

#~ msgid "Plotting in SVG format"
#~ msgstr "SVG 형식으로 플로팅"

#~ msgid "Plot Hplg, Postscript, SVG"
#~ msgstr "HPGL, PS, SVG 플로트"

#~ msgid "Save options in <project>.pro"
#~ msgstr "<project>.pro에 설정 저장"

#~ msgid "Kicad &Help"
#~ msgstr "KiCad 도움말"

#~ msgid "List"
#~ msgstr "목록"

#~ msgid "Hierar."
#~ msgstr "계층구조"

#~ msgid "Bad Bus Label: "
#~ msgstr "잘못된 버스 라벨: "

#~ msgid "&Netlist"
#~ msgstr "네트리스트 (&N)"

#~ msgid "Must be Annotated, Continue ?"
#~ msgstr "애노테이트가 필요합니다. 그래도 계속 하시겠습니까?"

#~ msgid "Schematic modified, Save before exit ?"
#~ msgstr "회로도가 수정되었습니다. 끝내기 전에 저장하시겠습니까?"

#~ msgid "Select component (%d items)"
#~ msgstr " 컴포넌트 선택 (%d 항목)"

#~ msgid "PinSheet Shape:"
#~ msgstr "핀 시트 모양:"

#~ msgid "Warning: more than 1 part in Symbol File"
#~ msgstr "경고: 심볼 파일에 1개 이상의 부품이 있습니다."

#~ msgid "New component"
#~ msgstr "새 부품"

#~ msgid "Save current component into current loaded library (in memory)"
#~ msgstr "현재 부품을 로드된 라이브러리에 저장 (메모리)"

#~ msgid "import component"
#~ msgstr "부품 가져오기"

#~ msgid "show as \"De Morgan\" normal part"
#~ msgstr "드모르강 표준 부품으로 표시"

#~ msgid "show as \"De Morgan\" convert part"
#~ msgstr "드모르강 변환 부품으로 표시"

#~ msgid "Documents"
#~ msgstr "문서:"

#~ msgid "Edit pins part per part (Carefully use!)"
#~ msgstr "부품마다 핀 편집 (주의 요망!)"

#~ msgid "1:1 zoom"
#~ msgstr "1:1 확대"

#~ msgid "Current Part: <%s> (is Alias of <%s>)"
#~ msgstr "현재 부품: <%s> (<%s>의 별명)"

#~ msgid "Error: Root Part <%s> not found"
#~ msgstr "에러: 루트 부분 <%s>을(를) 찾을 수 없습니다."

#~ msgid "Current Part: <%s>"
#~ msgstr "현재 부품: <%s>"

#~ msgid "Doc:"
#~ msgstr "문서:"

#~ msgid "DocFileName:"
#~ msgstr "문서 파일 이름:"

#~ msgid "Left justify"
#~ msgstr "왼쪽 맞춤"

#~ msgid "Right justify"
#~ msgstr "오른쪽 맞춤"

#~ msgid "Bottom justify"
#~ msgstr "아래쪽 맞춤"

#~ msgid "Top justify"
#~ msgstr "위쪽 맞춤"

#~ msgid "Current field: XXXXXX"
#~ msgstr "현재 필드: XXXXXX"

#~ msgid "Vert Justify"
#~ msgstr "세로 맞춤"

#~ msgid "Ok to Delete Alias LIST"
#~ msgstr "별명 목록을 삭제합니다."

#~ msgid "This is the Root Part"
#~ msgstr "이것이 루트 부분입니다."

#~ msgid "Part as \"De Morgan\" anymore"
#~ msgstr "더 이상 드모르강 부품으로 표시하지 않음"

#~ msgid "Delete Convert items"
#~ msgstr "변환 항목 삭제"

#~ msgid "Size "
#~ msgstr "크기 "

#~ msgid "Component properties (Not found in lib)"
#~ msgstr "컴포넌트 속성 (라이브러리에서 찾을 수 없음)"

#~ msgid "Unit 1"
#~ msgstr "유닛 1"

#~ msgid "Unit 2"
#~ msgstr "유닛 2"

#~ msgid "Unit 3"
#~ msgstr "유닛 3"

#~ msgid "Unit 4"
#~ msgstr "유닛 4"

#~ msgid "Unit 5"
#~ msgstr "유닛 5"

#~ msgid "Unit 6"
#~ msgstr "유닛 6"

#~ msgid "Unit 7"
#~ msgstr "유닛 7"

#~ msgid "Unit 8"
#~ msgstr "유닛 8"

#~ msgid "Unit 9"
#~ msgstr "유닛 9"

#~ msgid "Unit 10"
#~ msgstr "유닛 10"

#~ msgid "Unit 11"
#~ msgstr "유닛 11"

#~ msgid "Unit 12"
#~ msgstr "유닛 12"

#~ msgid "Unit 13"
#~ msgstr "유닛 13"

#~ msgid "Unit 14"
#~ msgstr "유닛 14"

#~ msgid "Unit 15"
#~ msgstr "유닛 15"

#~ msgid "Unit 16"
#~ msgstr "유닛 16"

#~ msgid "Unit 17"
#~ msgstr "유닛 17"

#~ msgid "Unit 18"
#~ msgstr "유닛 18"

#~ msgid "Unit 19"
#~ msgstr "유닛 19"

#~ msgid "Unit 20"
#~ msgstr "유닛 20"

#~ msgid "Unit 21"
#~ msgstr "유닛 21"

#~ msgid "Unit 22"
#~ msgstr "유닛 22"

#~ msgid "Unit 23"
#~ msgstr "유닛 23"

#~ msgid "Unit 24"
#~ msgstr "유닛 24"

#~ msgid "Unit 25"
#~ msgstr "유닛 25"

#~ msgid "Unit 26"
#~ msgstr "유닛 26"

#~ msgid "Orient:"
#~ msgstr "방향"

#~ msgid "Mirror --"
#~ msgstr "미러 --"

#~ msgid "List of Material"
#~ msgstr "부품 목록"

#~ msgid " List items : "
#~ msgstr "항목 목록:"

#~ msgid "Module: "
#~ msgstr "모듈: "

#~ msgid "Pad &Num"
#~ msgstr "패드 번호 (&N)"

#~ msgid "&Filaire"
#~ msgstr "채우지 않음 (&F)"

#~ msgid "&Filled"
#~ msgstr "채움 (&F)"

#~ msgid "Texts:"
#~ msgstr "텍스트"

#~ msgid "Read Cfg"
#~ msgstr "설정 읽기"

#~ msgid "View &Net + Pkg"
#~ msgstr "네트+패키지 보기 (&N)"

#~ msgid "Equiv"
#~ msgstr "등가"

#~ msgid "Library: <%s> not found"
#~ msgstr "라이브러리: <%s> 찾을 수 없음"

#~ msgid "%d equivalences"
#~ msgstr "%d 등가"

#~ msgid "Problem when saving files, Exit anyway"
#~ msgstr "파일 저장에 문제가 있습니다. 종료되었습니다."

#~ msgid "Componants: %d (free: %d)"
#~ msgstr "컴포넌트: %d (자유: %d)"

#~ msgid "font for dialog boxes"
#~ msgstr "대화상자"

#~ msgid "font for Lists"
#~ msgstr "목록창"

#~ msgid "font for Status Line"
#~ msgstr "상태줄"

#~ msgid "Choose font type and size for dialogs, infos and status box"
#~ msgstr "대화상자, 정보, 상태줄 글꼴의 형식과 크기 선택"

#~ msgid "%s %s pin %s : Different Nets"
#~ msgstr "%s %s 핀 %s: 상이한 네트"

#~ msgid "Components: %d (free: %d)"
#~ msgstr "컴포넌트: %d (자유: %d)"

#~ msgid "Save Net List & Cmp"
#~ msgstr "네트리스트 및 컴포넌트 저장"

#~ msgid "Unable to create component file (.cmp)"
#~ msgstr "컴포넌트 파일을 만들 수 없습니다. (.cmp)"

#~ msgid "Load Net List"
#~ msgstr "네트리스트 열기"

#~ msgid "Modules: %d"
#~ msgstr "모듈: %d"

#~ msgid "Library file <%s> is not a module library"
#~ msgstr "<%s> 라이브러리 파일은 모듈 라이브러리가 아닙니다."

#~ msgid "Lib Dir:"
#~ msgstr "라이브러리 디렉토리:"

#~ msgid "Net Input Ext:"
#~ msgstr "네트 입력 확장자: "

#~ msgid "Pkg Ext:"
#~ msgstr "패키지 확장자: "

#~ msgid "Cmp ext:"
#~ msgstr "컴포넌트 확장자: "

#~ msgid "Lib ext:"
#~ msgstr "라이브러리 확장자: "

#~ msgid "NetOut ext:"
#~ msgstr "네트 출력 확장자: "

#~ msgid "Equiv ext:"
#~ msgstr "등가 확장자: "

#~ msgid "Retro ext:"
#~ msgstr "Retro 확장자: "

#~ msgid "Netlist Format: EESchema"
#~ msgstr "네트리스트 형식: EESchema"

#~ msgid "Netlist Format: Pcad"
#~ msgstr "네트리스트 형식: P-CAD"

#~ msgid "Save Nelist and Cmp list"
#~ msgstr "네트리스트 및 컴포넌트 리스트 저장"

#~ msgid "Create stuff file (component/module list)"
#~ msgstr "스터프 파일 만들기 (컴포넌트/모듈 목록)"

#~ msgid "Display/print component documentation (footprint.pdf)"
#~ msgstr "컴포넌트 문서 표시/인쇄 (footprint.pdf)"

#~ msgid "&Save Netlist"
#~ msgstr "네트리스트 파일 저장 (&S)"

#~ msgid "Save New Netlist and Cmp file"
#~ msgstr "새 네트리스트 파일 및 컴포넌트 파일 저장"

#~ msgid "Cvpcb &About"
#~ msgstr "Cvpcb에 대하여 (&A)"

#~ msgid "Format Netlist: ViewLogic net&pkg"
#~ msgstr "형식 네트리스트: ViewLogic 네트 및 패키지"

#~ msgid "Component [%s] not found in .pkg file"
#~ msgstr ".pkg 파일에서 [%s] 컴포넌트를 찾을 수 없습니다."

#~ msgid "Netlist file "
#~ msgstr "네트리스트 파일"

#~ msgid "&Unzip Archive"
#~ msgstr "압축 풀기 (&U)"

#~ msgid "Use the default (system) PDF viewer used to browse datasheets"
#~ msgstr "시스템 기본 PDF 뷰어 사용"

#~ msgid "Use your favourite PDF viewer used to browse datasheets"
#~ msgstr "사용자 지정 PDF 뷰어 사용"

#~ msgid "Select your favourite PDF viewer used to browse datasheets"
#~ msgstr "사용자 PDF 뷰어 선택"

#~ msgid "Pdf Browser"
#~ msgstr "PDF 브라우저"

#~ msgid "Kicad &About"
#~ msgstr "KiCad에 대하여 (&A)"

#~ msgid "Cvpcb (Componants to modules)"
#~ msgstr "Cvpcb (컴포넌트 -> 모듈)"

#~ msgid "Pcbnew ( board editor )"
#~ msgstr "PCBNEW (보드 에디터)"

#~ msgid "GerbView ( Gerber viewer )"
#~ msgstr "GERBVIEW (거버 뷰어)"

#~ msgid " exists! OK to continue?"
#~ msgstr " 종료됩니다. 그래도 계속 하시겠습니까?"

#~ msgid "Unzip in "
#~ msgstr "다음으로 압축 해제: "

#~ msgid ""
#~ "\n"
#~ "Create Zip Archive "
#~ msgstr ""
#~ "\n"
#~ "Zip 압축 만들기"

#~ msgid ""
#~ "Ready\n"
#~ "Working dir: %s\n"
#~ msgstr ""
#~ "준비 완료\n"
#~ "작업 디렉토리: %s\n"

#~ msgid ""
#~ "\n"
#~ "Working dir: "
#~ msgstr ""
#~ "\n"
#~ "작업 디렉토리: "

#~ msgid "GERBER PLOT files:"
#~ msgstr "거버 플로트 파일:"

#~ msgid "D CODES files:"
#~ msgstr "D-Codes 파일:"

#~ msgid "format: 2.3"
#~ msgstr "형식: 2.3"

#~ msgid "format 3.4"
#~ msgstr "형식: 3.4"

#~ msgid "Gerbview Draw Options"
#~ msgstr "GERBVIEW 드로우 설정"

#~ msgid "Spots:"
#~ msgstr "점"

#~ msgid "Tool"
#~ msgstr "도구"

#~ msgid "D CODE"
#~ msgstr "D-Codes"

#~ msgid "D type"
#~ msgstr "D 형식"

#~ msgid "Ok to delete block ?"
#~ msgstr "블록을 삭제하시겠습니까?"

#~ msgid "List D codes"
#~ msgstr "D-Codes 목록"

#~ msgid "Layer modified,  Continue ?"
#~ msgstr "레이어가 수정되었습니다. 그래도 계속 하시겠습니까?"

#~ msgid "Load new Gerber file on currrent layer"
#~ msgstr "현재 레이어에 새 거버 파일 열기"

#~ msgid "Inc Layer and load Gerber file"
#~ msgstr "레이어 증가 후 거버 파일 열기"

#~ msgid "Increment layer number, and Load Gerber file"
#~ msgstr "레이어 번호 증가 후 거버 파일 열기"

#~ msgid "Load Drill"
#~ msgstr "드릴 열기"

#~ msgid "Load Drill File (EXCELLON Format)"
#~ msgstr "드릴 파일 열기 (EXCELLON 형식)"

#~ msgid "Save current layers (GERBER format)"
#~ msgstr "현재 레이어 저장 (거버 형식)"

#~ msgid "&File ext"
#~ msgstr "파일 확장자 (&F)"

#~ msgid "Select Colors and Display for layers"
#~ msgstr "레이어 색상 및 표시 선택"

#~ msgid "&Save Gerbview Setup"
#~ msgstr "설정 저장 (&S)"

#~ msgid "List and Edit DCodes"
#~ msgstr "D-Codes 목록 및 편집"

#~ msgid "&Delete Layer"
#~ msgstr "레이어 삭제 (&D)"

#~ msgid "Gerbview is already running, Continue?"
#~ msgstr "GERBVIEW가 이미 실행 중입니다. 그래도 계속 하시겠습니까?"

#~ msgid "Delete zones ?"
#~ msgstr "영역을 삭제하시겠습니까?"

#~ msgid "Copy Block (shift mouse)"
#~ msgstr "블록 복사 (Shift+마우스)"

#~ msgid "Delete Block (ctrl + drag mouse)"
#~ msgstr "블록 삭제 (Ctrl+드래그)"

#~ msgid "DCode File Ext:"
#~ msgstr "D-Codes 파일 확장자: "

#~ msgid "Too many include files!!"
#~ msgstr "너무 많은 파일을 포함하고 있습니다!"

#~ msgid "Gerbview Layer Colors:"
#~ msgstr "GERBVIEW 레이어 색상:"

#~ msgid "New World"
#~ msgstr "새 좌표계"

#~ msgid "Print World"
#~ msgstr "좌표계 인쇄"

#~ msgid "No tool"
#~ msgstr "도구 없음"

#~ msgid "Tool "
#~ msgstr "도구"

#~ msgid "Add Flashes"
#~ msgstr "플래쉬 추가"

#~ msgid "Show Spots Sketch"
#~ msgstr "점 스케치 보이기"

#~ msgid "Show Lines Sketch"
#~ msgstr "선 스케치 보이기"

#~ msgid "Block Save"
#~ msgstr "블록 저장"

#~ msgid "Block Invert"
#~ msgstr "블록 반전"

#~ msgid " (\"):"
#~ msgstr " (\"):"

#~ msgid "Copper   "
#~ msgstr "Copper   "

#~ msgid "Inner L1 "
#~ msgstr "Inner L1 "

#~ msgid "Inner L2 "
#~ msgstr "Inner L2 "

#~ msgid "Inner L3 "
#~ msgstr "Inner L3 "

#~ msgid "Inner L4 "
#~ msgstr "Inner L4 "

#~ msgid "Inner L5 "
#~ msgstr "Inner L5 "

#~ msgid "Inner L6 "
#~ msgstr "Inner L6 "

#~ msgid "Inner L7 "
#~ msgstr "Inner L7 "

#~ msgid "Inner L8 "
#~ msgstr "Inner L8 "

#~ msgid "Inner L9 "
#~ msgstr "Inner L9 "

#~ msgid "Inner L10"
#~ msgstr "Inner L10"

#~ msgid "Inner L11"
#~ msgstr "Inner L11"

#~ msgid "Inner L12"
#~ msgstr "Inner L12"

#~ msgid "Inner L13"
#~ msgstr "Inner L13"

#~ msgid "Inner L14"
#~ msgstr "Inner L14"

#~ msgid "Adhes Cop"
#~ msgstr "Adhes Cop"

#~ msgid "Adhes Cmp"
#~ msgstr "Adhes Cmp"

#~ msgid "SoldP Cop"
#~ msgstr "SoldP Cop"

#~ msgid "SoldP Cmp"
#~ msgstr "SoldP Cmp"

#~ msgid "SilkS Cop"
#~ msgstr "SilkS Cop"

#~ msgid "SilkS Cmp"
#~ msgstr "SilkS Cmp"

#~ msgid "Mask Copp"
#~ msgstr "Mask Copp"

#~ msgid "Mask Cmp "
#~ msgstr "Mask Cmp "

#~ msgid "Edges Pcb"
#~ msgstr "Edges Pcb"

#~ msgid "---      "
#~ msgstr "---      "

#~ msgid "Doc File "
#~ msgstr "문서 파일"

#~ msgid " Cannot find the PDF viewer (xpdf, gpdf or konqueror) in /usr/bin/"
#~ msgstr ""
#~ "  /usr/bin/에서 PDF 뷰어를 찾을 수 없습니다. (xpdf, gpdf 또는 konqueror)"

#~ msgid "Rotate X ->"
#~ msgstr "회전 X ->"

#~ msgid "Rotate X <-"
#~ msgstr "회전 X <-"

#~ msgid "Rotate Y ->"
#~ msgstr "회전 Y ->"

#~ msgid "Rotate Y <-"
#~ msgstr "회전 Y <-"

#~ msgid "Rotate Z ->"
#~ msgstr "회전 Z ->"

#~ msgid "Rotate Z <-"
#~ msgstr "회전 Z <-"

#~ msgid "Create Image (png format)"
#~ msgstr "이미지 만들기 (png 형식)"

#~ msgid "Create Image (jpeg format)"
#~ msgstr "이미지 만들기 (jpeg 형식)"

#~ msgid "Printer Problem!"
#~ msgstr "프린터에 문제가 있습니다!"

#~ msgid "There was a problem previewing"
#~ msgstr "미리 보기에 문제가 있습니다!"

#~ msgid "Based on wxWidgets"
#~ msgstr "wxWidgets에 기초하였습니다."

#~ msgid ""
#~ "\n"
#~ "\n"
#~ "Web sites:\n"
#~ msgstr ""
#~ "\n"
#~ "\n"
#~ "웹사이트:\n"

#~ msgid "TextMod properties"
#~ msgstr "모듈 텍스트 속성"

#~ msgid "Dialog"
#~ msgstr "대화상자"

#~ msgid "Length(inch):"
#~ msgstr "길이(인치):"

#~ msgid "Length(mm):"
#~ msgstr "길이(밀리미터):"

#~ msgid "Unable to create line: Requested length is too big"
#~ msgstr "선을 작성할 수 없습니다: 입력된 길이가 너무 깁니다."

#~ msgid "Component Creation"
#~ msgstr "컴포넌트 만들기"

#~ msgid "EESchema Locate"
#~ msgstr "EESchema 위치"

#~ msgid "EESchema Plot PS"
#~ msgstr "EESchema PS 플로트"

#~ msgid "EESchema Plot HPGL"
#~ msgstr "EESchema HPGL 플로트"

#~ msgid "EESchema Erc"
#~ msgstr "EESchema ERC"

#~ msgid "Layers 1-16"
#~ msgstr "Layers 1-16"

#~ msgid "Layers 17-32"
#~ msgstr "Layers 17-32"

#~ msgid "Layer 2"
#~ msgstr "Layer 2"

#~ msgid "Layer 3"
#~ msgstr "Layer 3"

#~ msgid "Layer 4"
#~ msgstr "Layer 4"

#~ msgid "Layer 5"
#~ msgstr "Layer 5"

#~ msgid "Layer 6"
#~ msgstr "Layer 6"

#~ msgid "Layer 7"
#~ msgstr "Layer 7"

#~ msgid "Layer 8"
#~ msgstr "Layer 8"

#~ msgid "Layer 9"
#~ msgstr "Layer 9"

#~ msgid "Layer 10"
#~ msgstr "Layer 10"

#~ msgid "Layer 11"
#~ msgstr "Layer 11"

#~ msgid "Layer 12"
#~ msgstr "Layer 12"

#~ msgid "Layer 13"
#~ msgstr "Layer 13"

#~ msgid "Layer 14"
#~ msgstr "Layer 14"

#~ msgid "Layer 15"
#~ msgstr "Layer 15"

#~ msgid "Layer 16"
#~ msgstr "Layer 16"

#~ msgid "Layer 17"
#~ msgstr "Layer 17"

#~ msgid "Layer 18"
#~ msgstr "Layer 18"

#~ msgid "Layer 19"
#~ msgstr "Layer 19"

#~ msgid "Layer 20"
#~ msgstr "Layer 20"

#~ msgid "Layer 21"
#~ msgstr "Layer 21"

#~ msgid "Layer 22"
#~ msgstr "Layer 22"

#~ msgid "Layer 23"
#~ msgstr "Layer 23"

#~ msgid "Layer 24"
#~ msgstr "Layer 24"

#~ msgid "Layer 25"
#~ msgstr "Layer 25"

#~ msgid "Layer 26"
#~ msgstr "Layer 26"

#~ msgid "Layer 27"
#~ msgstr "Layer 27"

#~ msgid "Layer 28"
#~ msgstr "Layer 28"

#~ msgid "Layer 29"
#~ msgstr "Layer 29"

#~ msgid "Layer 30"
#~ msgstr "Layer 30"

#~ msgid "Layer 31"
#~ msgstr "Layer 31"

#~ msgid "Layer 32"
#~ msgstr "Layer 32"

#~ msgid "User Page Size X: "
#~ msgstr "사용자 크기 X: "

#~ msgid "User Page Size Y: "
#~ msgstr "사용자 크기 Y: "

#~ msgid "Print as text for spreadsheet import"
#~ msgstr "스프레드시트에서 읽을 수 있는 텍스트로 인쇄"

#~ msgid "Add Field 3"
#~ msgstr "필드 3 추가"

#~ msgid "Add Field 4"
#~ msgstr "필드 4 추가"

#~ msgid "Add Field 5"
#~ msgstr "필드 5 추가"

#~ msgid "Add Field 6"
#~ msgstr "필드 6 추가"

#~ msgid "Add Field 7"
#~ msgstr "필드 7 추가"

#~ msgid "Add Field 8"
#~ msgstr "필드 8 추가"

#~ msgid "Mirror Block ||"
#~ msgstr "블록 미러 ||"

#~ msgid "Footprints (All): %d"
#~ msgstr "풋프린트 (모두): %d"

#~ msgid "Display the full footprint list (without filtering)"
#~ msgstr "모든 풋프린트 목록 표시 (필터링 안 됨)"

#~ msgid "Drill Shape:"
#~ msgstr "드릴 모양:"

#~ msgid "Move (M)"
#~ msgstr "이동 (M)"

#~ msgid "Drag (G)"
#~ msgstr "드래그  (G)"

#~ msgid "Rotate  + (R)"
#~ msgstr "회전 +  (R)"

#~ msgid "delete"
#~ msgstr "삭제"

#~ msgid "Size A1"
#~ msgstr "A1 크기"

#~ msgid "Size A0"
#~ msgstr "A0 크기"

#~ msgid "Size D"
#~ msgstr "D 크기"

#~ msgid "Size E"
#~ msgstr "E 크기"

#~ msgid "New &PCB"
#~ msgstr "새 PCB (&P)"

#~ msgid "Create a New PCB File"
#~ msgstr "새 PCB 파일 만들기"

#~ msgid "Create a New Txt File"
#~ msgstr "새 텍스트 파일 만들기"

#~ msgid "New &File"
#~ msgstr "새 파일 (&F)"

#~ msgid "&Rename Directory"
#~ msgstr "디렉토리 이름 바꾸기 (&R)"

#~ msgid "&Rename the Directory"
#~ msgstr "디렉토리 이름 바꾸기 (&R)"

#~ msgid "Delete the File"
#~ msgstr "파일 삭제"

#~ msgid "Pcb Text"
#~ msgstr "PCB 텍스트"

#~ msgid "Move Segment"
#~ msgstr "세그먼트 이동"

#~ msgid "&Contents"
#~ msgstr "목차 (&C)"

#~ msgid "Load Board    Ctrl-O"
#~ msgstr "보드 열기         Ctrl-O"

#~ msgid "&Save board    Ctrl-S"
#~ msgstr "보드 저장 (&S)    Ctrl-S"

#~ msgid "Ok to change the existing file ?"
#~ msgstr "기존 파일을 변경하시겠습니까 ?"

#~ msgid "Delete Segment (backspace)"
#~ msgstr "세그먼트 삭제 (backspace)"

#~ msgid "Move and Auto Place"
#~ msgstr "이동 및 자동 배치"

#~ msgid "Text for spreadsheet import"
#~ msgstr "스프래드시트 형식 텍스트"

#~ msgid ";"
#~ msgstr ";"

#~ msgid "Field separator for spreadsheet import:"
#~ msgstr "스프래드시트 필드 분리자"

#~ msgid "Add above"
#~ msgstr "위로 추가"

#~ msgid "Save application preferences"
#~ msgstr "응용 프로그램의 설정을 저장합니다."

#~ msgid "&Read preferences"
#~ msgstr "설정 읽기 (&R)"

#~ msgid "Read application preferences"
#~ msgstr "응용 프로그램의 설정을 불러옵니다."

#~ msgid "Delete module?"
#~ msgstr "모듈을 삭제하시겠습니까?"

#~ msgid "key "
#~ msgstr "단축키: "

#~ msgid "Unable to read "
#~ msgstr "다음을 읽을 수 없습니다: "

#~ msgid "Show the current hotkey config"
#~ msgstr "현재 단축키 설정 보이기"

#~ msgid "Create Hotkey config file"
#~ msgstr "단축키 설정 파일 만들기"

#~ msgid "Create or Recreate the hotkey config file from current hotkey list"
#~ msgstr ""
#~ "현재 단축키 목록으로부터 단축키 설정 파일을 새로 만들거나 다시 만듭니다."

#~ msgid "Reread Hotkey config file"
#~ msgstr "단축키 설정 파일 다시 읽기"

#~ msgid "Reread the hotkey config file"
#~ msgstr "단축키 설정 파일을 다시 읽습니다."

#~ msgid "Edit Hotkey config file"
#~ msgstr "단축키 설정 파일 편집"

#~ msgid "Run the text editor and edit the hotkey config file"
#~ msgstr "텍스트 에디터로 단축키 설정 파일을 편집합니다."

#~ msgid "Use home directory to load or store Hotkey config files"
#~ msgstr "홈 디렉토리에서 단축키 설정 파일을 읽거나 저장합니다."

#~ msgid "Use kicad/template directory to load or store Hotkey config files"
#~ msgstr "kicad/template 디렉토리에서 단축키 설정 파일을 읽거나 저장합니다."

#~ msgid "Hotkey config location"
#~ msgstr "단축키 설정 위치"

#~ msgid "Hotkey config file location selection (home directory or kicad tree)"
#~ msgstr "단축키 설정 위치 선택 (홈 디렉토리 또는 kicad 트리)"

#~ msgid "zoom +"
#~ msgstr "확대 +"

#~ msgid "zoom -"
#~ msgstr "축소 -"

#~ msgid "redraw"
#~ msgstr "새로 고침"

#~ msgid "Create &List"
#~ msgstr "목록 만들기 (&L)"

#~ msgid "Save NetList and Components List files"
#~ msgstr "네트리스트 및 컴포넌트 목록 파일 저장"

#~ msgid ""
#~ "Extend dangling tracks which partially cover a pad or via, all the way to "
#~ "pad or via center"
#~ msgstr ""
#~ "부분적으로 패드 또는 비아를 덮고 있는 달링 트랙을 트랙 또는 비아 중심으로 "
#~ "확장합니다."

#~ msgid "Clean pcb"
#~ msgstr "PCB 정리"

#~ msgid "Default library file path:"
#~ msgstr "기본 라이브러리 파일 경로:"

#~ msgid "Delete component in current library"
#~ msgstr "현재 라이브러리의 컴포넌트 삭제"

#~ msgid "D code File Ext:"
#~ msgstr "D-Code 파일 확장자:"

#~ msgid "Save Cfg..."
#~ msgstr "설정 저장..."

#, fuzzy
#~ msgid "Place a module"
#~ msgstr "노드 설치"

#, fuzzy
#~ msgid "Antipad clearance:"
#~ msgstr "마스크 유격"

#, c-format
#~ msgid "Grid: %s (%s)"
#~ msgstr "그리드: %s (%s)"

#, fuzzy
#~ msgid "Selection Control"
#~ msgstr "선택 영역만"

#~ msgid "Radius:"
#~ msgstr "반경:"

#, fuzzy, c-format
#~ msgid "Could not find Spice item with reference '%s'"
#~ msgstr "IBIS 모델을 찾을 수 없습니다’ %s‘"

#~ msgid "Could not open configuration file"
#~ msgstr "설정 파일을 열 수 없음"

#, c-format
#~ msgid "Update footprint %s from '%s' to '%s'"
#~ msgstr "풋프린트 %s을(를) '%s'에서 '%s'(으)로 업데이트"

#~ msgid "Move and Place"
#~ msgstr "이동 및 배치"

#~ msgid "Convert to Arc"
#~ msgstr "호로 변환"

#, fuzzy, c-format
#~ msgid "Could not create file \"%s\"."
#~ msgstr "%s 파일을 만들 수 없습니다."

#, fuzzy, c-format
#~ msgid "Failed to delete '%s'"
#~ msgstr "만들기 실패"

#, fuzzy
#~ msgid "Rebuild Ratsnest"
#~ msgstr "로컬 연결선"

#, fuzzy
#~ msgid "Edit Field..."
#~ msgstr "필드 편집"

#, fuzzy
#~ msgid "&Project..."
#~ msgstr "프로젝트 (&P)"

#, fuzzy
#~ msgid "Polygons"
#~ msgstr "다각형:"

#, fuzzy
#~ msgid "Edit Pad..."
#~ msgstr "패드 편집"

#, fuzzy
#~ msgid "&Single Track"
#~ msgstr "단일 페이지"

#, fuzzy
#~ msgid "Footprint properties"
#~ msgstr "치수 속성"

#~ msgid "Delete All"
#~ msgstr "모두 삭제"

#, fuzzy
#~ msgid "Use default netname"
#~ msgstr "네트 이름 사용"

#, fuzzy
#~ msgid "Error Messages:"
#~ msgstr "메시지:"

#~ msgid "Failed to find part "
#~ msgstr "부품 찾기 실패"

#~ msgid "Glabel Shape:"
#~ msgstr "전역 라벨 모양"

#~ msgid "Select an existing project descriptor"
#~ msgstr "프로젝트 열기"