/* * This program source code file is part of KiCad, a free EDA CAD application. * * Copyright (C) 2019 Jean-Pierre Charras, jp.charras at wanadoo.fr * Copyright (C) 2013 Dick Hollenbeck, dick@softplc.com * Copyright (C) 2008-2013 Wayne Stambaugh * Copyright (C) 1992-2019 KiCad Developers, see AUTHORS.txt for contributors. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, you may find one here: * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html * or you may search the http://www.gnu.org website for the version 2 license, * or you may write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include // for enum RECT_CHAMFER_POSITIONS definition // list of pad shapes, ordered like the pad shape wxChoice in dialog. static PAD_SHAPE_T code_shape[] = { PAD_SHAPE_CIRCLE, PAD_SHAPE_OVAL, PAD_SHAPE_RECT, PAD_SHAPE_TRAPEZOID, PAD_SHAPE_ROUNDRECT, PAD_SHAPE_CHAMFERED_RECT, PAD_SHAPE_CUSTOM, // choice = CHOICE_SHAPE_CUSTOM_CIRC_ANCHOR PAD_SHAPE_CUSTOM // choice = PAD_SHAPE_CUSTOM_RECT_ANCHOR }; // the ordered index of the pad shape wxChoice in dialog. // keep it consistent with code_shape[] and dialog strings enum CODE_CHOICE { CHOICE_SHAPE_CIRCLE = 0, CHOICE_SHAPE_OVAL, CHOICE_SHAPE_RECT, CHOICE_SHAPE_TRAPEZOID, CHOICE_SHAPE_ROUNDRECT, CHOICE_SHAPE_CHAMFERED_RECT, CHOICE_SHAPE_CUSTOM_CIRC_ANCHOR, CHOICE_SHAPE_CUSTOM_RECT_ANCHOR }; static PAD_ATTR_T code_type[] = { PAD_ATTRIB_STANDARD, PAD_ATTRIB_SMD, PAD_ATTRIB_CONN, PAD_ATTRIB_HOLE_NOT_PLATED, PAD_ATTRIB_SMD // Aperture pad :type SMD with no copper layers, // only on tech layers (usually only on paste layer }; // Default mask layers setup for pads according to the pad type static const LSET std_pad_layers[] = { D_PAD::StandardMask(), // PAD_ATTRIB_STANDARD: D_PAD::SMDMask(), // PAD_ATTRIB_SMD: D_PAD::ConnSMDMask(), // PAD_ATTRIB_CONN: D_PAD::UnplatedHoleMask(), // PAD_ATTRIB_HOLE_NOT_PLATED: D_PAD::ApertureMask() }; void PCB_BASE_FRAME::InstallPadOptionsFrame( D_PAD* aPad ) { DIALOG_PAD_PROPERTIES dlg( this, aPad ); dlg.ShowQuasiModal(); // QuasiModal required for NET_SELECTOR } DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES( PCB_BASE_FRAME* aParent, D_PAD* aPad ) : DIALOG_PAD_PROPERTIES_BASE( aParent ), m_parent( aParent ), m_canUpdate( false ), m_posX( aParent, m_posXLabel, m_posXCtrl, m_posXUnits ), m_posY( aParent, m_posYLabel, m_posYCtrl, m_posYUnits ), m_sizeX( aParent, m_sizeXLabel, m_sizeXCtrl, m_sizeXUnits, true ), m_sizeY( aParent, m_sizeYLabel, m_sizeYCtrl, m_sizeYUnits, true ), m_offsetX( aParent, m_offsetXLabel, m_offsetXCtrl, m_offsetXUnits, true ), m_offsetY( aParent, m_offsetYLabel, m_offsetYCtrl, m_offsetYUnits, true ), m_padToDie( aParent, m_padToDieLabel, m_padToDieCtrl, m_padToDieUnits, true ), m_trapDelta( aParent, m_trapDeltaLabel, m_trapDeltaCtrl, m_trapDeltaUnits, true ), m_cornerRadius( aParent, m_cornerRadiusLabel, m_tcCornerRadius, m_cornerRadiusUnits, true ), m_holeX( aParent, m_holeXLabel, m_holeXCtrl, m_holeXUnits, true ), m_holeY( aParent, m_holeYLabel, m_holeYCtrl, m_holeYUnits, true ), m_OrientValidator( 1, &m_OrientValue ), m_clearance( aParent, m_clearanceLabel, m_clearanceCtrl, m_clearanceUnits, true ), m_maskClearance( aParent, m_maskClearanceLabel, m_maskClearanceCtrl, m_maskClearanceUnits, true ), m_pasteClearance( aParent, m_pasteClearanceLabel, m_pasteClearanceCtrl, m_pasteClearanceUnits, true ), m_spokeWidth( aParent, m_spokeWidthLabel, m_spokeWidthCtrl, m_spokeWidthUnits, true ), m_thermalGap( aParent, m_thermalGapLabel, m_thermalGapCtrl, m_thermalGapUnits, true ) { m_currentPad = aPad; // aPad can be NULL, if the dialog is called // from the footprint editor to set default pad setup m_board = m_parent->GetBoard(); m_PadNetSelector->SetNetInfo( &m_board->GetNetInfo() ); m_OrientValidator.SetRange( -360.0, 360.0 ); m_orientation->SetValidator( m_OrientValidator ); m_OrientValidator.SetWindow( m_orientation ); m_cbShowPadOutline->SetValue( m_sketchPreview ); m_FlippedWarningIcon->SetBitmap( KiBitmap( dialog_warning_xpm ) ); m_nonCopperWarningIcon->SetBitmap( KiBitmap( dialog_warning_xpm ) ); m_padMaster = &m_parent->GetDesignSettings().m_Pad_Master; m_dummyPad = new D_PAD( (MODULE*) NULL ); if( aPad ) { *m_dummyPad = *aPad; m_dummyPad->ClearFlags( SELECTED|HIGHLIGHTED|BRIGHTENED ); } else // We are editing a "master" pad, i.e. a template to create new pads *m_dummyPad = *m_padMaster; initValues(); wxFont infoFont = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT ); infoFont.SetSymbolicSize( wxFONTSIZE_SMALL ); m_techLayersLabel->SetFont( infoFont ); m_parentInfoLine1->SetFont( infoFont ); m_parentInfoLine2->SetFont( infoFont ); m_nonCopperNote->SetFont( infoFont ); m_staticTextInfoPaste->SetFont( infoFont ); infoFont.SetStyle( wxFONTSTYLE_ITALIC ); m_staticTextInfoNegVal->SetFont( infoFont ); m_staticTextInfoPosValue->SetFont( infoFont ); // Usually, TransferDataToWindow is called by OnInitDialog // calling it here fixes all widget sizes so FinishDialogSettings can safely fix minsizes TransferDataToWindow(); // Initialize canvas to be able to display the dummy pad: prepareCanvas(); SetInitialFocus( m_PadNumCtrl ); m_sdbSizerOK->SetDefault(); m_canUpdate = true; m_PadNetSelector->Connect( NET_SELECTED, wxCommandEventHandler( DIALOG_PAD_PROPERTIES::OnValuesChanged ), NULL, this ); // Now all widgets have the size fixed, call FinishDialogSettings FinishDialogSettings(); } DIALOG_PAD_PROPERTIES::~DIALOG_PAD_PROPERTIES() { m_PadNetSelector->Disconnect( NET_SELECTED, wxCommandEventHandler( DIALOG_PAD_PROPERTIES::OnValuesChanged ), NULL, this ); delete m_dummyPad; delete m_axisOrigin; } bool DIALOG_PAD_PROPERTIES::m_sketchPreview = false; // Stores the pad draw option during a session void DIALOG_PAD_PROPERTIES::OnInitDialog( wxInitDialogEvent& event ) { m_selectedColor = COLOR4D( 1.0, 1.0, 1.0, 0.7 ); // Needed on some WM to be sure the pad is redrawn according to the final size // of the canvas, with the right zoom factor redraw(); } void DIALOG_PAD_PROPERTIES::OnCancel( wxCommandEvent& event ) { // Mandatory to avoid m_panelShowPadGal trying to draw something // in a non valid context during closing process: m_panelShowPadGal->StopDrawing(); // Now call default handler for wxID_CANCEL command event event.Skip(); } void DIALOG_PAD_PROPERTIES::enablePrimitivePage( bool aEnable ) { // Enable or disable the widgets in page managing custom shape primitives m_listCtrlPrimitives->Enable( aEnable ); m_buttonDel->Enable( aEnable ); m_buttonEditShape->Enable( aEnable ); m_buttonAddShape->Enable( aEnable ); m_buttonDup->Enable( aEnable ); m_buttonGeometry->Enable( aEnable ); } void DIALOG_PAD_PROPERTIES::prepareCanvas() { // Initialize the canvas to display the pad // Show the X and Y axis. It is usefull because pad shape can have an offset // or be a complex shape. KIGFX::COLOR4D axis_color = LIGHTBLUE; m_axisOrigin = new KIGFX::ORIGIN_VIEWITEM( axis_color, KIGFX::ORIGIN_VIEWITEM::CROSS, Millimeter2iu( 0.2 ), VECTOR2D( m_dummyPad->GetPosition() ) ); m_axisOrigin->SetDrawAtZero( true ); m_panelShowPadGal->UseColorScheme( &m_parent->Settings().Colors() ); m_panelShowPadGal->SwitchBackend( m_parent->GetCanvas()->GetBackend() ); m_panelShowPadGal->SetStealsFocus( false ); bool mousewheelPan = m_parent->GetCanvas()->GetViewControls()->IsMousewheelPanEnabled(); m_panelShowPadGal->GetViewControls()->EnableMousewheelPan( mousewheelPan ); m_panelShowPadGal->Show(); m_panelShowPad->Hide(); KIGFX::VIEW* view = m_panelShowPadGal->GetView(); // fix the pad render mode (filled/not filled) auto settings = static_cast( view->GetPainter()->GetSettings() ); bool sketchMode = m_cbShowPadOutline->IsChecked(); settings->SetSketchMode( LAYER_PADS_TH, sketchMode ); settings->SetSketchMode( LAYER_PAD_FR, sketchMode ); settings->SetSketchMode( LAYER_PAD_BK, sketchMode ); settings->SetSketchModeGraphicItems( sketchMode ); // gives a non null grid size (0.001mm) because GAL layer does not like a 0 size grid: double gridsize = 0.001 * IU_PER_MM; view->GetGAL()->SetGridSize( VECTOR2D( gridsize, gridsize ) ); // And do not show the grid: view->GetGAL()->SetGridVisibility( false ); view->Add( m_dummyPad ); view->Add( m_axisOrigin ); m_panelShowPadGal->StartDrawing(); Connect( wxEVT_SIZE, wxSizeEventHandler( DIALOG_PAD_PROPERTIES::OnResize ) ); } void DIALOG_PAD_PROPERTIES::OnPaintShowPanel( wxPaintEvent& event ) { wxPaintDC dc( m_panelShowPad ); PAD_DRAWINFO drawInfo; COLOR4D color = COLOR4D::BLACK; if( m_dummyPad->GetLayerSet()[F_Cu] ) color = m_parent->Settings().Colors().GetItemColor( LAYER_PAD_FR ); if( m_dummyPad->GetLayerSet()[B_Cu] ) color = color.LegacyMix( m_parent->Settings().Colors().GetItemColor( LAYER_PAD_BK ) ); // What could happen: the pad color is *actually* black, or no copper was selected if( color == BLACK ) color = LIGHTGRAY; drawInfo.m_Color = color; drawInfo.m_HoleColor = DARKGRAY; drawInfo.m_Offset = m_dummyPad->GetPosition(); drawInfo.m_Display_padnum = true; drawInfo.m_Display_netname = true; drawInfo.m_ShowPadFilled = !m_sketchPreview; if( m_dummyPad->GetAttribute() == PAD_ATTRIB_HOLE_NOT_PLATED ) drawInfo.m_ShowNotPlatedHole = true; // Shows the local pad clearance drawInfo.m_PadClearance = m_dummyPad->GetLocalClearance(); wxSize dc_size = dc.GetSize(); dc.SetDeviceOrigin( dc_size.x / 2, dc_size.y / 2 ); // Calculate a suitable scale to fit the available draw area int dim = m_dummyPad->GetBoundingRadius() *2; // Invalid x size. User could enter zero, or have deleted all text prior to // entering a new value; this is also treated as zero. If dim is left at // zero, the drawing scale is zero and we get a crash. if( dim == 0 ) { // If drill size has been set, use that. Otherwise default to 1mm. dim = m_dummyPad->GetDrillSize().x; if( dim == 0 ) dim = Millimeter2iu( 1.0 ); } if( m_dummyPad->GetLocalClearance() > 0 ) dim += m_dummyPad->GetLocalClearance() * 2; double scale = (double) dc_size.x / dim; // If the pad is a circle, use the x size here instead. int ysize; if( m_dummyPad->GetShape() == PAD_SHAPE_CIRCLE ) ysize = m_dummyPad->GetSize().x; else ysize = m_dummyPad->GetSize().y; dim = ysize + std::abs( m_dummyPad->GetDelta().x ); // Invalid y size. See note about x size above. if( dim == 0 ) { dim = m_dummyPad->GetDrillSize().y; if( dim == 0 ) dim = Millimeter2iu( 0.1 ); } if( m_dummyPad->GetLocalClearance() > 0 ) dim += m_dummyPad->GetLocalClearance() * 2; double altscale = (double) dc_size.y / dim; scale = std::min( scale, altscale ); // Give a margin scale *= 0.7; dc.SetUserScale( scale, scale ); GRResetPenAndBrush( &dc ); m_dummyPad->PrintShape( &dc, drawInfo ); // draw selected primitives: long select = m_listCtrlPrimitives->GetFirstSelected(); while( select >= 0 ) { PAD_CS_PRIMITIVE& primitive = m_primitives[select]; // The best way to calculate parameters to draw a primitive is to // use a dummy DRAWSEGMENT and use its methods // Note: in legacy canvas, the pad has the 0,0 position DRAWSEGMENT dummySegment; primitive.ExportTo( &dummySegment ); dummySegment.Rotate( wxPoint( 0, 0), m_dummyPad->GetOrientation() ); switch( primitive.m_Shape ) { case S_SEGMENT: // usual segment : line with rounded ends if( !m_sketchPreview ) GRFilledSegment( NULL, &dc, dummySegment.GetStart(), dummySegment.GetEnd(), primitive.m_Thickness, m_selectedColor ); else GRCSegm( NULL, &dc, dummySegment.GetStart(), dummySegment.GetEnd(), primitive.m_Thickness, m_selectedColor ); break; case S_ARC: // Arc with rounded ends if( !m_sketchPreview ) GRArc1( NULL, &dc, dummySegment.GetArcEnd(), dummySegment.GetArcStart(), dummySegment.GetCenter(), primitive.m_Thickness, m_selectedColor ); else { GRArc1( NULL, &dc, dummySegment.GetArcEnd(), dummySegment.GetArcStart(), dummySegment.GetCenter(), 0, m_selectedColor ); /* GRArc1( NULL, &dc, dummySegment.GetArcEnd(), dummySegment.GetArcStart(), dummySegment.GetCenter() - primitive.m_Thickness, 0, m_selectedColor );*/ } break; case S_CIRCLE: // ring or circle if( primitive.m_Thickness ) { if( !m_sketchPreview ) GRCircle( nullptr, &dc, dummySegment.GetCenter(), primitive.m_Radius, primitive.m_Thickness, m_selectedColor ); else { GRCircle( nullptr, &dc, dummySegment.GetCenter(), primitive.m_Radius + primitive.m_Thickness/2, 0, m_selectedColor ); GRCircle( nullptr, &dc, dummySegment.GetCenter(), primitive.m_Radius - primitive.m_Thickness/2, 0, m_selectedColor ); } } else { if( !m_sketchPreview ) GRFilledCircle( nullptr, &dc, dummySegment.GetCenter(), primitive.m_Radius, m_selectedColor ); else GRCircle( nullptr, &dc, dummySegment.GetCenter(), primitive.m_Radius, 0, m_selectedColor ); } break; case S_POLYGON: // polygon { std::vector poly = dummySegment.BuildPolyPointsList(); GRClosedPoly( nullptr, &dc, poly.size(), &poly[0], !m_sketchPreview, primitive.m_Thickness, m_selectedColor, m_selectedColor ); } break; default: break; } select = m_listCtrlPrimitives->GetNextSelected( select ); } // Draw X and Y axis. This is particularly useful to show the // reference position of pads with offset and no hole, or custom pad shapes const int t = 0; // line thickness GRLine( nullptr, &dc, -int( dc_size.x/scale ), 0, int( dc_size.x/scale ), 0, t, LIGHTBLUE ); GRLine( nullptr, &dc, 0, -int( dc_size.y/scale ), 0, int( dc_size.y/scale ), t, LIGHTBLUE ); event.Skip(); } void DIALOG_PAD_PROPERTIES::updateRoundRectCornerValues() { // Note: use m_tcCornerSizeRatio->ChangeValue() to avoid generating a wxEVT_TEXT event if( m_dummyPad->GetShape() == PAD_SHAPE_ROUNDRECT || m_dummyPad->GetShape() == PAD_SHAPE_CHAMFERED_RECT ) { auto ratio = wxString::Format( "%.1f", m_dummyPad->GetRoundRectRadiusRatio() * 100 ); m_tcCornerSizeRatio->ChangeValue( ratio ); m_cornerRadius.SetValue( m_dummyPad->GetRoundRectCornerRadius() ); ratio = wxString::Format( "%.1f", m_dummyPad->GetChamferRectRatio() * 100 ); m_tcChamferRatio->ChangeValue( ratio ); } else if( m_dummyPad->GetShape() == PAD_SHAPE_RECT ) { m_tcCornerSizeRatio->ChangeValue( "0" ); m_cornerRadius.SetValue( 0 ); } else { m_tcCornerSizeRatio->ChangeValue( wxEmptyString ); m_cornerRadius.SetValue( wxEmptyString ); } } void DIALOG_PAD_PROPERTIES::onCornerRadiusChange( wxCommandEvent& event ) { if( m_dummyPad->GetShape() != PAD_SHAPE_ROUNDRECT && m_dummyPad->GetShape() != PAD_SHAPE_CHAMFERED_RECT ) return; double rrRadius = m_cornerRadius.GetValue(); if( rrRadius < 0.0 ) { rrRadius = 0.0; m_tcCornerRadius->ChangeValue( wxString::Format( "%.1f", rrRadius ) ); } transferDataToPad( m_dummyPad ); m_dummyPad->SetRoundRectCornerRadius(rrRadius ); auto ratio = wxString::Format( "%.1f", m_dummyPad->GetRoundRectRadiusRatio() * 100 ); m_tcCornerSizeRatio->ChangeValue( ratio ); redraw(); } void DIALOG_PAD_PROPERTIES::onCornerSizePercentChange( wxCommandEvent& event ) { if( m_dummyPad->GetShape() != PAD_SHAPE_ROUNDRECT && m_dummyPad->GetShape() != PAD_SHAPE_CHAMFERED_RECT ) return; wxString value = m_tcCornerSizeRatio->GetValue(); double ratioPercent; bool asChanged = false; if( value.ToDouble( &ratioPercent ) ) { // Clamp ratioPercent to acceptable value (0.0 to 50.0) if( ratioPercent < 0.0 ) { ratioPercent = 0.0; value.Printf( "%.1f", ratioPercent ); m_tcCornerSizeRatio->ChangeValue( value ); } if( ratioPercent > 50.0 ) { ratioPercent = 0.5; value.Printf( "%.1f", ratioPercent*100.0 ); m_tcCornerSizeRatio->ChangeValue( value ); } asChanged = true; } value = m_tcChamferRatio->GetValue(); if( value.ToDouble( &ratioPercent ) ) { // Clamp ratioPercent to acceptable value (0.0 to 50.0) if( ratioPercent < 0.0 ) { ratioPercent = 0.0; value.Printf( "%.1f", ratioPercent ); m_tcChamferRatio->ChangeValue( value ); } if( ratioPercent > 50.0 ) { ratioPercent = 0.5; value.Printf( "%.1f", ratioPercent*100.0 ); m_tcChamferRatio->ChangeValue( value ); } asChanged = true; } if( asChanged ) { transferDataToPad( m_dummyPad ); m_cornerRadius.ChangeValue( m_dummyPad->GetRoundRectCornerRadius() ); redraw(); } } void DIALOG_PAD_PROPERTIES::initValues() { wxString msg; double angle; // Disable pad net name wxTextCtrl if the caller is the footprint editor // because nets are living only in the board managed by the board editor m_canEditNetName = m_parent->IsType( FRAME_PCB_EDITOR ); // Setup layers names from board // Should be made first, before calling m_rbCopperLayersSel->SetSelection() m_rbCopperLayersSel->SetString( 0, m_board->GetLayerName( F_Cu ) ); m_rbCopperLayersSel->SetString( 1, m_board->GetLayerName( B_Cu ) ); m_PadLayerAdhCmp->SetLabel( m_board->GetLayerName( F_Adhes ) ); m_PadLayerAdhCu->SetLabel( m_board->GetLayerName( B_Adhes ) ); m_PadLayerPateCmp->SetLabel( m_board->GetLayerName( F_Paste ) ); m_PadLayerPateCu->SetLabel( m_board->GetLayerName( B_Paste ) ); m_PadLayerSilkCmp->SetLabel( m_board->GetLayerName( F_SilkS ) ); m_PadLayerSilkCu->SetLabel( m_board->GetLayerName( B_SilkS ) ); m_PadLayerMaskCmp->SetLabel( m_board->GetLayerName( F_Mask ) ); m_PadLayerMaskCu->SetLabel( m_board->GetLayerName( B_Mask ) ); m_PadLayerECO1->SetLabel( m_board->GetLayerName( Eco1_User ) ); m_PadLayerECO2->SetLabel( m_board->GetLayerName( Eco2_User ) ); m_PadLayerDraft->SetLabel( m_board->GetLayerName( Dwgs_User ) ); m_isFlipped = false; if( m_currentPad ) { m_isFlipped = m_currentPad->IsFlipped(); // Diplay parent footprint info MODULE* footprint = m_currentPad->GetParent(); wxString msg1, msg2; if( footprint ) { wxString side = footprint->IsFlipped() ? _( "back side (mirrored)" ) : _( "front side" ); msg1.Printf( _("Footprint %s (%s),"), footprint->GetReference(), footprint->GetValue() ); msg2.Printf( _("%s, rotated %.1f deg"), side, footprint->GetOrientation() / 10.0 ); } m_parentInfoLine1->SetLabel( msg1 ); m_parentInfoLine2->SetLabel( msg2 ); } if( m_isFlipped ) { wxPoint pt = m_dummyPad->GetOffset(); pt.y = -pt.y; m_dummyPad->SetOffset( pt ); wxSize sz = m_dummyPad->GetDelta(); sz.y = -sz.y; m_dummyPad->SetDelta( sz ); // flip pad's layers m_dummyPad->SetLayerSet( FlipLayerMask( m_dummyPad->GetLayerSet() ) ); // flip custom pad shapes m_dummyPad->FlipPrimitives(); } m_primitives = m_dummyPad->GetPrimitives(); m_FlippedWarningSizer->Show( m_isFlipped ); m_PadNumCtrl->SetValue( m_dummyPad->GetName() ); m_PadNetSelector->SetSelectedNetcode( m_dummyPad->GetNetCode() ); // Display current pad parameters units: m_posX.SetValue( m_dummyPad->GetPosition().x ); m_posY.SetValue( m_dummyPad->GetPosition().y ); m_holeX.SetValue( m_dummyPad->GetDrillSize().x ); m_holeY.SetValue( m_dummyPad->GetDrillSize().y ); m_sizeX.SetValue( m_dummyPad->GetSize().x ); m_sizeY.SetValue( m_dummyPad->GetSize().y ); m_offsetX.SetValue( m_dummyPad->GetOffset().x ); m_offsetY.SetValue( m_dummyPad->GetOffset().y ); if( m_dummyPad->GetDelta().x ) { m_trapDelta.SetValue( m_dummyPad->GetDelta().x ); m_trapAxisCtrl->SetSelection( 0 ); } else { m_trapDelta.SetValue( m_dummyPad->GetDelta().y ); m_trapAxisCtrl->SetSelection( 1 ); } m_padToDie.SetValue( m_dummyPad->GetPadToDieLength() ); m_clearance.SetValue( m_dummyPad->GetLocalClearance() ); m_maskClearance.SetValue( m_dummyPad->GetLocalSolderMaskMargin() ); m_spokeWidth.SetValue( m_dummyPad->GetThermalWidth() ); m_thermalGap.SetValue( m_dummyPad->GetThermalGap() ); m_pasteClearance.SetValue( m_dummyPad->GetLocalSolderPasteMargin() ); // Prefer "-0" to "0" for normally negative values if( m_dummyPad->GetLocalSolderPasteMargin() == 0 ) m_pasteClearanceCtrl->SetValue( wxT( "-" ) + m_pasteClearanceCtrl->GetValue() ); msg.Printf( wxT( "%f" ), m_dummyPad->GetLocalSolderPasteMarginRatio() * 100.0 ); if( m_dummyPad->GetLocalSolderPasteMarginRatio() == 0.0 && msg[0] == '0' ) // Sometimes Printf adds a sign if the value is small m_SolderPasteMarginRatioCtrl->SetValue( wxT( "-" ) + msg ); else m_SolderPasteMarginRatioCtrl->SetValue( msg ); switch( m_dummyPad->GetLocalZoneConnection() ) { default: case PAD_ZONE_CONN_INHERITED: m_ZoneConnectionChoice->SetSelection( 0 ); break; case PAD_ZONE_CONN_FULL: m_ZoneConnectionChoice->SetSelection( 1 ); break; case PAD_ZONE_CONN_THERMAL: m_ZoneConnectionChoice->SetSelection( 2 ); break; case PAD_ZONE_CONN_NONE: m_ZoneConnectionChoice->SetSelection( 3 ); break; } if( m_dummyPad->GetCustomShapeInZoneOpt() == CUST_PAD_SHAPE_IN_ZONE_CONVEXHULL ) m_ZoneCustomPadShape->SetSelection( 1 ); else m_ZoneCustomPadShape->SetSelection( 0 ); if( m_currentPad ) { angle = m_currentPad->GetOrientation(); MODULE* footprint = m_currentPad->GetParent(); if( footprint ) angle -= footprint->GetOrientation(); if( m_isFlipped ) angle = -angle; m_dummyPad->SetOrientation( angle ); } angle = m_dummyPad->GetOrientation(); NORMALIZE_ANGLE_180( angle ); // ? normalizing is in D_PAD::SetOrientation() // Set layers used by this pad: : setPadLayersList( m_dummyPad->GetLayerSet() ); // Pad Orient // Note: use ChangeValue() instead of SetValue() so that we don't generate events m_orientation->ChangeValue( StringFromValue( DEGREES, angle ) ); switch( m_dummyPad->GetShape() ) { default: case PAD_SHAPE_CIRCLE: m_PadShape->SetSelection( CHOICE_SHAPE_CIRCLE ); break; case PAD_SHAPE_OVAL: m_PadShape->SetSelection( CHOICE_SHAPE_OVAL ); break; case PAD_SHAPE_RECT: m_PadShape->SetSelection( CHOICE_SHAPE_RECT ); break; case PAD_SHAPE_TRAPEZOID: m_PadShape->SetSelection( CHOICE_SHAPE_TRAPEZOID ); break; case PAD_SHAPE_ROUNDRECT: m_PadShape->SetSelection( CHOICE_SHAPE_ROUNDRECT ); break; case PAD_SHAPE_CHAMFERED_RECT: m_PadShape->SetSelection( CHOICE_SHAPE_CHAMFERED_RECT ); break; case PAD_SHAPE_CUSTOM: if( m_dummyPad->GetAnchorPadShape() == PAD_SHAPE_RECT ) m_PadShape->SetSelection( CHOICE_SHAPE_CUSTOM_RECT_ANCHOR ); else m_PadShape->SetSelection( CHOICE_SHAPE_CUSTOM_CIRC_ANCHOR ); break; } m_cbTopLeft->SetValue( (m_dummyPad->GetChamferPositions() & RECT_CHAMFER_TOP_LEFT) ); m_cbTopRight->SetValue( (m_dummyPad->GetChamferPositions() & RECT_CHAMFER_TOP_RIGHT) ); m_cbBottomLeft->SetValue( (m_dummyPad->GetChamferPositions() & RECT_CHAMFER_BOTTOM_LEFT) ); m_cbBottomRight->SetValue( (m_dummyPad->GetChamferPositions() & RECT_CHAMFER_BOTTOM_RIGHT) ); enablePrimitivePage( PAD_SHAPE_CUSTOM == m_dummyPad->GetShape() ); // Type of pad selection bool aperture = m_dummyPad->GetAttribute() == PAD_ATTRIB_CONN && m_dummyPad->IsAperturePad(); bool mechanical = m_dummyPad->GetAttribute() == PAD_ATTRIB_HOLE_NOT_PLATED; if( aperture ) { m_PadType->SetSelection( 4 ); } else { switch( m_dummyPad->GetAttribute() ) { case PAD_ATTRIB_STANDARD: m_PadType->SetSelection( 0 ); break; case PAD_ATTRIB_SMD: m_PadType->SetSelection( 1 ); break; case PAD_ATTRIB_CONN: m_PadType->SetSelection( 2 ); break; case PAD_ATTRIB_HOLE_NOT_PLATED: m_PadType->SetSelection( 3 ); break; } } // Disable Pad name,and pad to die length for mechanical and aperture pads m_PadNumText->Enable( !mechanical && !aperture ); m_PadNumCtrl->Enable( !mechanical && !aperture ); m_PadNameText->Enable( !mechanical && !aperture && m_canEditNetName && m_currentPad ); m_PadNetSelector->Enable( !mechanical && !aperture && m_canEditNetName && m_currentPad ); m_padToDie.Enable( !mechanical && !aperture ); if( m_dummyPad->GetDrillShape() != PAD_DRILL_SHAPE_OBLONG ) m_holeShapeCtrl->SetSelection( 0 ); else m_holeShapeCtrl->SetSelection( 1 ); // Update some dialog widgets state (Enable/disable options): wxCommandEvent cmd_event; setPadLayersList( m_dummyPad->GetLayerSet() ); OnDrillShapeSelected( cmd_event ); OnPadShapeSelection( cmd_event ); updateRoundRectCornerValues(); // Update basic shapes list displayPrimitivesList(); } // A small helper function, to display coordinates: static wxString formatCoord( EDA_UNITS_T aUnits, wxPoint aCoord ) { return wxString::Format( "(X:%s Y:%s)", MessageTextFromValue( aUnits, aCoord.x, true ), MessageTextFromValue( aUnits, aCoord.y, true ) ); } void DIALOG_PAD_PROPERTIES::displayPrimitivesList() { m_listCtrlPrimitives->ClearAll(); wxListItem itemCol; itemCol.SetImage(-1); for( int ii = 0; ii < 5; ++ii ) m_listCtrlPrimitives->InsertColumn(ii, itemCol); wxString bs_info[5]; for( unsigned ii = 0; ii < m_primitives.size(); ++ii ) { const PAD_CS_PRIMITIVE& primitive = m_primitives[ii]; for( unsigned jj = 0; jj < 5; ++jj ) bs_info[jj].Empty(); bs_info[4] = wxString::Format( _( "width %s" ), MessageTextFromValue( m_units, primitive.m_Thickness, true ) ); switch( primitive.m_Shape ) { case S_SEGMENT: // usual segment : line with rounded ends bs_info[0] = _( "Segment" ); bs_info[1] = _( "from " ) + formatCoord( m_units, primitive.m_Start ); bs_info[2] = _( "to " ) + formatCoord( m_units, primitive.m_End ); break; case S_CURVE: // Bezier segment bs_info[0] = _( "Bezier" ); bs_info[1] = _( "from " ) + formatCoord( m_units, primitive.m_Start ); bs_info[2] = _( "to " ) + formatCoord( m_units, primitive.m_End ); break; case S_ARC: // Arc with rounded ends bs_info[0] = _( "Arc" ); bs_info[1] = _( "center " ) + formatCoord( m_units, primitive.m_Start );// Center bs_info[2] = _( "start " ) + formatCoord( m_units, primitive.m_End ); // Start point bs_info[3] = wxString::Format( _( "angle %s" ), FormatAngle( primitive.m_ArcAngle ) ); break; case S_CIRCLE: // ring or circle if( primitive.m_Thickness ) bs_info[0] = _( "ring" ); else bs_info[0] = _( "circle" ); bs_info[1] = formatCoord( m_units, primitive.m_Start ); bs_info[2] = wxString::Format( _( "radius %s" ), MessageTextFromValue( m_units, primitive.m_Radius, true ) ); break; case S_POLYGON: // polygon bs_info[0] = "Polygon"; bs_info[1] = wxString::Format( _( "corners count %d" ), (int) primitive.m_Poly.size() ); break; default: bs_info[0] = "Unknown primitive"; break; } long tmp = m_listCtrlPrimitives->InsertItem(ii, bs_info[0]); m_listCtrlPrimitives->SetItemData(tmp, ii); for( int jj = 0, col = 0; jj < 5; ++jj ) { m_listCtrlPrimitives->SetItem(tmp, col++, bs_info[jj]); } } // Now columns are filled, ensure correct width of columns for( unsigned ii = 0; ii < 5; ++ii ) m_listCtrlPrimitives->SetColumnWidth( ii, wxLIST_AUTOSIZE ); } void DIALOG_PAD_PROPERTIES::OnResize( wxSizeEvent& event ) { redraw(); event.Skip(); } void DIALOG_PAD_PROPERTIES::onChangePadMode( wxCommandEvent& event ) { m_sketchPreview = m_cbShowPadOutline->GetValue(); KIGFX::VIEW* view = m_panelShowPadGal->GetView(); // fix the pad render mode (filled/not filled) KIGFX::PCB_RENDER_SETTINGS* settings = static_cast( view->GetPainter()->GetSettings() ); settings->SetSketchMode( LAYER_PADS_TH, m_sketchPreview ); settings->SetSketchMode( LAYER_PAD_FR, m_sketchPreview ); settings->SetSketchMode( LAYER_PAD_BK, m_sketchPreview ); settings->SetSketchModeGraphicItems( m_sketchPreview ); redraw(); } void DIALOG_PAD_PROPERTIES::OnPadShapeSelection( wxCommandEvent& event ) { bool is_custom = false; switch( m_PadShape->GetSelection() ) { case CHOICE_SHAPE_CIRCLE: m_trapDelta.Enable( false ); m_trapAxisLabel->Enable( false ); m_trapAxisCtrl->Enable( false ); m_sizeY.Enable( false ); m_offsetX.Enable( false ); m_offsetY.Enable( false ); break; case CHOICE_SHAPE_OVAL: m_trapDelta.Enable( false ); m_trapAxisLabel->Enable( false ); m_trapAxisCtrl->Enable( false ); m_sizeY.Enable( true ); m_offsetX.Enable( true ); m_offsetY.Enable( true ); break; case CHOICE_SHAPE_RECT: m_trapDelta.Enable( false ); m_trapAxisLabel->Enable( false ); m_trapAxisCtrl->Enable( false ); m_sizeY.Enable( true ); m_offsetX.Enable( true ); m_offsetY.Enable( true ); break; case CHOICE_SHAPE_TRAPEZOID: m_trapDelta.Enable( true ); m_trapAxisLabel->Enable( true ); m_trapAxisCtrl->Enable( true ); m_sizeY.Enable( true ); m_offsetX.Enable( true ); m_offsetY.Enable( true ); break; case CHOICE_SHAPE_ROUNDRECT: case CHOICE_SHAPE_CHAMFERED_RECT: m_trapDelta.Enable( false ); m_trapAxisLabel->Enable( false ); m_trapAxisCtrl->Enable( false ); m_sizeY.Enable( true ); m_offsetX.Enable( true ); m_offsetY.Enable( true ); // Ensure m_tcCornerSizeRatio contains the right value: m_tcCornerSizeRatio->ChangeValue( wxString::Format( "%.1f", m_dummyPad->GetRoundRectRadiusRatio()*100 ) ); break; case CHOICE_SHAPE_CUSTOM_CIRC_ANCHOR: // PAD_SHAPE_CUSTOM, circular anchor case CHOICE_SHAPE_CUSTOM_RECT_ANCHOR: // PAD_SHAPE_CUSTOM, rect anchor is_custom = true; m_trapDelta.Enable( false ); m_trapAxisLabel->Enable( false ); m_trapAxisCtrl->Enable( false ); m_sizeY.Enable( m_PadShape->GetSelection() == CHOICE_SHAPE_CUSTOM_RECT_ANCHOR ); m_offsetX.Enable( false ); m_offsetY.Enable( false ); break; } enablePrimitivePage( is_custom ); // A few widgets are enabled only for rounded rect and chamfered pads: bool chamfered_rect_enable = m_PadShape->GetSelection() == CHOICE_SHAPE_CHAMFERED_RECT; bool round_rect_enable = m_PadShape->GetSelection() == CHOICE_SHAPE_ROUNDRECT || chamfered_rect_enable; m_staticTextCornerSizeRatio->Enable( round_rect_enable ); m_tcCornerSizeRatio->Enable( round_rect_enable ); m_staticTextCornerSizeRatioUnit->Enable( round_rect_enable ); m_cornerRadius.Enable( round_rect_enable ); m_cbTopLeft->Enable( chamfered_rect_enable ); m_cbTopRight->Enable( chamfered_rect_enable ); m_cbBottomLeft->Enable( chamfered_rect_enable ); m_cbBottomRight->Enable( chamfered_rect_enable ); m_tcChamferRatio->Enable( chamfered_rect_enable ); m_staticTextcps->Enable( is_custom ); m_ZoneCustomPadShape->Enable( is_custom ); transferDataToPad( m_dummyPad ); updateRoundRectCornerValues(); redraw(); } void DIALOG_PAD_PROPERTIES::OnDrillShapeSelected( wxCommandEvent& event ) { transferDataToPad( m_dummyPad ); redraw(); } void DIALOG_PAD_PROPERTIES::PadOrientEvent( wxCommandEvent& event ) { transferDataToPad( m_dummyPad ); redraw(); } void DIALOG_PAD_PROPERTIES::PadTypeSelected( wxCommandEvent& event ) { int ii = m_PadType->GetSelection(); if( (unsigned)ii >= arrayDim( code_type ) ) // catches < 0 also ii = 0; bool hasHole, hasConnection; switch( ii ) { default: case 0: /* PTH */ hasHole = true; hasConnection = true; break; case 1: /* SMD */ hasHole = false; hasConnection = true; break; case 2: /* CONN */ hasHole = false; hasConnection = true; break; case 3: /* NPTH */ hasHole = true; hasConnection = false; break; case 4: /* Aperture */ hasHole = false; hasConnection = false; break; } LSET layer_mask = std_pad_layers[ii]; setPadLayersList( layer_mask ); if( !hasHole ) { m_holeX.SetValue( 0 ); m_holeY.SetValue( 0 ); } else if ( m_holeX.GetValue() == 0 && m_currentPad ) { m_holeX.SetValue( m_currentPad->GetDrillSize().x ); m_holeY.SetValue( m_currentPad->GetDrillSize().y ); } if( !hasConnection ) { m_PadNumCtrl->SetValue( wxEmptyString ); m_PadNetSelector->SetSelectedNetcode( 0 ); m_padToDie.SetValue( 0 ); } else if( m_PadNumCtrl->GetValue().IsEmpty() && m_currentPad ) { m_PadNumCtrl->SetValue( m_currentPad->GetName() ); m_PadNetSelector->SetSelectedNetcode( m_currentPad->GetNetCode() ); } transferDataToPad( m_dummyPad ); redraw(); } void DIALOG_PAD_PROPERTIES::OnUpdateUI( wxUpdateUIEvent& event ) { int ii = m_PadType->GetSelection(); if( (unsigned)ii >= arrayDim( code_type ) ) // catches < 0 also ii = 0; bool hasHole, hasConnection; switch( ii ) { default: case 0: /* PTH */ hasHole = true; hasConnection = true; break; case 1: /* SMD */ hasHole = false; hasConnection = true; break; case 2: /* CONN */ hasHole = false; hasConnection = true; break; case 3: /* NPTH */ hasHole = true; hasConnection = false; break; case 4: /* Aperture */ hasHole = false; hasConnection = false; break; } // Enable/disable hole controls m_holeShapeLabel->Enable( hasHole ); m_holeShapeCtrl->Enable( hasHole ); m_holeX.Enable( hasHole ); m_holeY.Enable( hasHole && m_holeShapeCtrl->GetSelection() == 1 ); // Enable/disable Pad number, net and pad length-to-die m_PadNumText->Enable( hasConnection ); m_PadNumCtrl->Enable( hasConnection ); m_PadNameText->Enable( hasConnection ); m_PadNetSelector->Enable( hasConnection && m_canEditNetName && m_currentPad ); m_padToDie.Enable( hasConnection ); // Enable/disable Copper Layers control m_rbCopperLayersSel->Enable( ii != 4 ); } void DIALOG_PAD_PROPERTIES::setPadLayersList( LSET layer_mask ) { LSET cu_set = layer_mask & LSET::AllCuMask(); if( cu_set == LSET( F_Cu ) ) m_rbCopperLayersSel->SetSelection( 0 ); else if( cu_set == LSET( B_Cu ) ) m_rbCopperLayersSel->SetSelection( 1 ); else if( cu_set.any() ) m_rbCopperLayersSel->SetSelection( 2 ); else m_rbCopperLayersSel->SetSelection( 3 ); m_PadLayerAdhCmp->SetValue( layer_mask[F_Adhes] ); m_PadLayerAdhCu->SetValue( layer_mask[B_Adhes] ); m_PadLayerPateCmp->SetValue( layer_mask[F_Paste] ); m_PadLayerPateCu->SetValue( layer_mask[B_Paste] ); m_PadLayerSilkCmp->SetValue( layer_mask[F_SilkS] ); m_PadLayerSilkCu->SetValue( layer_mask[B_SilkS] ); m_PadLayerMaskCmp->SetValue( layer_mask[F_Mask] ); m_PadLayerMaskCu->SetValue( layer_mask[B_Mask] ); m_PadLayerECO1->SetValue( layer_mask[Eco1_User] ); m_PadLayerECO2->SetValue( layer_mask[Eco2_User] ); m_PadLayerDraft->SetValue( layer_mask[Dwgs_User] ); } // Called when select/deselect a layer. void DIALOG_PAD_PROPERTIES::OnSetLayers( wxCommandEvent& event ) { transferDataToPad( m_dummyPad ); redraw(); } // test if all values are acceptable for the pad bool DIALOG_PAD_PROPERTIES::padValuesOK() { bool error = transferDataToPad( m_dummyPad ); bool skip_tstoffset = false; // the offset prm is not always tested wxArrayString error_msgs; wxString msg; // Test for incorrect values if( (m_dummyPad->GetSize().x <= 0) || ((m_dummyPad->GetSize().y <= 0) && (m_dummyPad->GetShape() != PAD_SHAPE_CIRCLE)) ) { error_msgs.Add( _( "Pad size must be greater than zero" ) ); } if( (m_dummyPad->GetSize().x < m_dummyPad->GetDrillSize().x) || (m_dummyPad->GetSize().y < m_dummyPad->GetDrillSize().y) ) { error_msgs.Add( _( "Incorrect value for pad drill: pad drill bigger than pad size" ) ); skip_tstoffset = true; // offset prm will be not tested because if the drill value // is incorrect the offset prm is always seen as incorrect, even if it is 0 } if( m_dummyPad->GetLocalClearance() < 0 ) { error_msgs.Add( _( "Pad local clearance must be zero or greater than zero" ) ); } // Some pads need a negative solder mask clearance (mainly for BGA with small pads) // However the negative solder mask clearance must not create negative mask size // Therefore test for minimal acceptable negative value // Hovewer, a negative value can give strange result with custom shapes, so it is not // allowed for custom pad shape if( m_dummyPad->GetLocalSolderMaskMargin() < 0 ) { if( m_dummyPad->GetShape() == PAD_SHAPE_CUSTOM ) error_msgs.Add( _( "Pad local solder mask clearance must be zero or greater than zero" ) ); else { int min_smClearance = -std::min( m_dummyPad->GetSize().x, m_dummyPad->GetSize().y )/2; if( m_dummyPad->GetLocalSolderMaskMargin() <= min_smClearance ) { error_msgs.Add( wxString::Format( _( "Pad local solder mask clearance must be greater than %s" ), StringFromValue( GetUserUnits(), min_smClearance, true, true ) ) ); } } } // Some pads need a positive solder paste clearance (mainly for BGA with small pads) // Hovewer, a positive value can create issues if the resulting shape is too big. // (like a solder paste creating a solder paste area on a neighbour pad or on the solder mask) // So we could ask for user to confirm the choice // Currently there are no test LSET padlayers_mask = m_dummyPad->GetLayerSet(); if( padlayers_mask == 0 ) error_msgs.Add( _( "Error: pad has no layer" ) ); if( !padlayers_mask[F_Cu] && !padlayers_mask[B_Cu] ) { if( m_dummyPad->GetDrillSize().x || m_dummyPad->GetDrillSize().y ) { // Note: he message is shown in an HTML window msg = _( "Error: the pad is not on a copper layer and has a hole" ); if( m_dummyPad->GetAttribute() == PAD_ATTRIB_HOLE_NOT_PLATED ) { msg += wxT( "

" ); msg += _( "For NPTH pad, set pad size value to pad drill value," " if you do not want this pad plotted in gerber files" ); } error_msgs.Add( msg ); } } if( !skip_tstoffset ) { wxPoint max_size; max_size.x = std::abs( m_dummyPad->GetOffset().x ); max_size.y = std::abs( m_dummyPad->GetOffset().y ); max_size.x += m_dummyPad->GetDrillSize().x / 2; max_size.y += m_dummyPad->GetDrillSize().y / 2; if( ( m_dummyPad->GetSize().x / 2 < max_size.x ) || ( m_dummyPad->GetSize().y / 2 < max_size.y ) ) { error_msgs.Add( _( "Incorrect value for pad offset" ) ); } } if( error ) error_msgs.Add( _( "Too large value for pad delta size" ) ); switch( m_dummyPad->GetAttribute() ) { case PAD_ATTRIB_HOLE_NOT_PLATED: // Not plated, but through hole, a hole is expected case PAD_ATTRIB_STANDARD : // Pad through hole, a hole is also expected if( m_dummyPad->GetDrillSize().x <= 0 || ( m_dummyPad->GetDrillSize().y <= 0 && m_dummyPad->GetDrillShape() == PAD_DRILL_SHAPE_OBLONG ) ) error_msgs.Add( _( "Error: Through hole pad: drill diameter set to 0" ) ); break; case PAD_ATTRIB_CONN: // Connector pads are smd pads, just they do not have solder paste. if( padlayers_mask[B_Paste] || padlayers_mask[F_Paste] ) error_msgs.Add( _( "Error: Connector pads are not on the solder paste layer\n" "Use SMD pads instead" ) ); // Fall trough case PAD_ATTRIB_SMD: // SMD and Connector pads (One external copper layer only) { LSET innerlayers_mask = padlayers_mask & LSET::InternalCuMask(); if( ( padlayers_mask[F_Cu] && padlayers_mask[B_Cu] ) || innerlayers_mask.count() != 0 ) error_msgs.Add( _( "Error: only one external copper layer allowed for SMD or Connector pads" ) ); } break; } if( m_dummyPad->GetShape() == PAD_SHAPE_ROUNDRECT || m_dummyPad->GetShape() == PAD_SHAPE_CHAMFERED_RECT ) { wxString value = m_tcCornerSizeRatio->GetValue(); double rrRadiusRatioPercent; if( !value.ToDouble( &rrRadiusRatioPercent ) ) error_msgs.Add( _( "Incorrect corner size value" ) ); else { if( rrRadiusRatioPercent < 0.0 ) error_msgs.Add( _( "Incorrect (negative) corner size value" ) ); else if( rrRadiusRatioPercent > 50.0 ) error_msgs.Add( _( "Corner size value must be smaller than 50%" ) ); } } if( m_dummyPad->GetShape() == PAD_SHAPE_CUSTOM ) { if( !m_dummyPad->MergePrimitivesAsPolygon( ) ) error_msgs.Add( _( "Incorrect pad shape: the shape must be equivalent to only one polygon" ) ); } if( error_msgs.GetCount() ) { HTML_MESSAGE_BOX dlg( this, _("Pad setup errors list" ) ); dlg.ListSet( error_msgs ); dlg.ShowModal(); } return error_msgs.GetCount() == 0; } void DIALOG_PAD_PROPERTIES::redraw() { KIGFX::VIEW* view = m_panelShowPadGal->GetView(); m_panelShowPadGal->StopDrawing(); // The layer used to place primitive items selected when editing custom pad shapes // we use here a layer never used in a pad: #define SELECTED_ITEMS_LAYER Dwgs_User view->SetTopLayer( SELECTED_ITEMS_LAYER ); KIGFX::PCB_RENDER_SETTINGS* settings = static_cast( view->GetPainter()->GetSettings() ); settings->SetLayerColor( SELECTED_ITEMS_LAYER, m_selectedColor ); view->Update( m_dummyPad ); // delete previous items if highlight list while( m_highlight.size() ) { delete m_highlight.back(); // the dtor also removes item from view m_highlight.pop_back(); } // highlight selected primitives: long select = m_listCtrlPrimitives->GetFirstSelected(); while( select >= 0 ) { PAD_CS_PRIMITIVE& primitive = m_primitives[select]; DRAWSEGMENT* dummySegment = new DRAWSEGMENT; dummySegment->SetLayer( SELECTED_ITEMS_LAYER ); primitive.ExportTo( dummySegment ); dummySegment->Rotate( wxPoint( 0, 0), m_dummyPad->GetOrientation() ); dummySegment->Move( m_dummyPad->GetPosition() ); // Update selected primitive (highlight selected) switch( primitive.m_Shape ) { case S_SEGMENT: case S_ARC: case S_CURVE: break; case S_CIRCLE: // ring or circle if( primitive.m_Thickness == 0 ) // filled circle { // the filled circle option does not exist in a DRAWSEGMENT // but it is easy to create it with a circle having the // right radius and outline width wxPoint end = dummySegment->GetCenter(); end.x += primitive.m_Radius / 2; dummySegment->SetEnd( end ); dummySegment->SetWidth( primitive.m_Radius ); } break; case S_POLYGON: break; default: delete dummySegment; dummySegment = nullptr; break; } if( dummySegment ) { view->Add( dummySegment ); m_highlight.push_back( dummySegment ); } select = m_listCtrlPrimitives->GetNextSelected( select ); } BOX2I bbox = m_dummyPad->ViewBBox(); if( bbox.GetSize().x > 0 && bbox.GetSize().y > 0 ) { // gives a size to the full drawable area BOX2I drawbox; drawbox.Move( m_dummyPad->GetPosition() ); drawbox.Inflate( bbox.GetSize().x * 2, bbox.GetSize().y * 2 ); view->SetBoundary( drawbox ); // Autozoom view->SetViewport( BOX2D( bbox.GetOrigin(), bbox.GetSize() ) ); // Add a margin view->SetScale( m_panelShowPadGal->GetView()->GetScale() * 0.7 ); m_panelShowPadGal->StartDrawing(); m_panelShowPadGal->Refresh(); } } bool DIALOG_PAD_PROPERTIES::TransferDataToWindow() { if( !wxDialog::TransferDataToWindow() ) return false; if( !m_panelGeneral->TransferDataToWindow() ) return false; if( !m_localSettingsPanel->TransferDataToWindow() ) return false; return true; } bool DIALOG_PAD_PROPERTIES::TransferDataFromWindow() { BOARD_COMMIT commit( m_parent ); if( !wxDialog::TransferDataFromWindow() ) return false; if( !m_panelGeneral->TransferDataFromWindow() ) return false; if( !m_localSettingsPanel->TransferDataFromWindow() ) return false; if( !padValuesOK() ) return false; int isign = m_isFlipped ? -1 : 1; transferDataToPad( m_padMaster ); // m_padMaster is a pattern: ensure there is no net for this pad: m_padMaster->SetNetCode( NETINFO_LIST::UNCONNECTED ); if( !m_currentPad ) // Set current Pad parameters return true; commit.Modify( m_currentPad ); // redraw the area where the pad was, without pad (delete pad on screen) m_currentPad->SetFlags( DO_NOT_DRAW ); m_parent->GetCanvas()->Refresh(); m_currentPad->ClearFlags( DO_NOT_DRAW ); // Update values m_currentPad->SetShape( m_padMaster->GetShape() ); m_currentPad->SetAttribute( m_padMaster->GetAttribute() ); m_currentPad->SetPosition( m_padMaster->GetPosition() ); wxSize size; MODULE* footprint = m_currentPad->GetParent(); if( footprint ) { footprint->SetLastEditTime(); // compute the pos 0 value, i.e. pad position for footprint with orientation = 0 // i.e. relative to footprint origin (footprint position) wxPoint pt = m_currentPad->GetPosition() - footprint->GetPosition(); RotatePoint( &pt, -footprint->GetOrientation() ); m_currentPad->SetPos0( pt ); m_currentPad->SetOrientation( m_padMaster->GetOrientation() * isign + footprint->GetOrientation() ); } m_currentPad->SetSize( m_padMaster->GetSize() ); size = m_padMaster->GetDelta(); size.y *= isign; m_currentPad->SetDelta( size ); m_currentPad->SetDrillSize( m_padMaster->GetDrillSize() ); m_currentPad->SetDrillShape( m_padMaster->GetDrillShape() ); wxPoint offset = m_padMaster->GetOffset(); offset.y *= isign; m_currentPad->SetOffset( offset ); m_currentPad->SetPadToDieLength( m_padMaster->GetPadToDieLength() ); if( m_padMaster->GetShape() != PAD_SHAPE_CUSTOM ) m_padMaster->DeletePrimitivesList(); m_currentPad->SetAnchorPadShape( m_padMaster->GetAnchorPadShape() ); m_currentPad->SetPrimitives( m_padMaster->GetPrimitives() ); if( m_isFlipped ) { m_currentPad->SetLayerSet( FlipLayerMask( m_currentPad->GetLayerSet() ) ); m_currentPad->FlipPrimitives(); } m_currentPad->SetLayerSet( m_padMaster->GetLayerSet() ); if( m_isFlipped ) { m_currentPad->SetLayerSet( FlipLayerMask( m_currentPad->GetLayerSet() ) ); } m_currentPad->SetName( m_padMaster->GetName() ); int padNetcode = NETINFO_LIST::UNCONNECTED; // For PAD_ATTRIB_HOLE_NOT_PLATED, ensure there is no net name selected if( m_padMaster->GetAttribute() != PAD_ATTRIB_HOLE_NOT_PLATED ) padNetcode = m_PadNetSelector->GetSelectedNetcode(); m_currentPad->SetNetCode( padNetcode ); m_currentPad->SetLocalClearance( m_padMaster->GetLocalClearance() ); m_currentPad->SetLocalSolderMaskMargin( m_padMaster->GetLocalSolderMaskMargin() ); m_currentPad->SetLocalSolderPasteMargin( m_padMaster->GetLocalSolderPasteMargin() ); m_currentPad->SetLocalSolderPasteMarginRatio( m_padMaster->GetLocalSolderPasteMarginRatio() ); m_currentPad->SetThermalWidth( m_padMaster->GetThermalWidth() ); m_currentPad->SetThermalGap( m_padMaster->GetThermalGap() ); m_currentPad->SetRoundRectRadiusRatio( m_padMaster->GetRoundRectRadiusRatio() ); m_currentPad->SetChamferRectRatio( m_padMaster->GetChamferRectRatio() ); m_currentPad->SetChamferPositions( m_padMaster->GetChamferPositions() ); m_currentPad->SetZoneConnection( m_padMaster->GetZoneConnection() ); // rounded rect pads with radius ratio = 0 are in fact rect pads. // So set the right shape (and perhaps issues with a radius = 0) if( m_currentPad->GetShape() == PAD_SHAPE_ROUNDRECT && m_currentPad->GetRoundRectRadiusRatio() == 0.0 ) { m_currentPad->SetShape( PAD_SHAPE_RECT ); } // define the way the clearance area is defined in zones m_currentPad->SetCustomShapeInZoneOpt( m_padMaster->GetCustomShapeInZoneOpt() ); if( footprint ) footprint->CalculateBoundingBox(); m_parent->SetMsgPanel( m_currentPad ); // redraw the area where the pad was m_parent->GetCanvas()->Refresh(); commit.Push( _( "Modify pad" ) ); return true; } bool DIALOG_PAD_PROPERTIES::transferDataToPad( D_PAD* aPad ) { wxString msg; if( !Validate() ) return true; if( !m_panelGeneral->Validate() ) return true; if( !m_localSettingsPanel->Validate() ) return true; if( !m_spokeWidth.Validate( 0, INT_MAX ) ) return false; m_OrientValidator.TransferFromWindow(); aPad->SetAttribute( code_type[m_PadType->GetSelection()] ); aPad->SetShape( code_shape[m_PadShape->GetSelection()] ); aPad->SetAnchorPadShape( m_PadShape->GetSelection() == CHOICE_SHAPE_CUSTOM_RECT_ANCHOR ? PAD_SHAPE_RECT : PAD_SHAPE_CIRCLE ); if( aPad->GetShape() == PAD_SHAPE_CUSTOM ) aPad->SetPrimitives( m_primitives ); // Read pad clearances values: aPad->SetLocalClearance( m_clearance.GetValue() ); aPad->SetLocalSolderMaskMargin( m_maskClearance.GetValue() ); aPad->SetLocalSolderPasteMargin( m_pasteClearance.GetValue() ); aPad->SetThermalWidth( m_spokeWidth.GetValue() ); aPad->SetThermalGap( m_thermalGap.GetValue() ); double dtmp = 0.0; msg = m_SolderPasteMarginRatioCtrl->GetValue(); msg.ToDouble( &dtmp ); // A -50% margin ratio means no paste on a pad, the ratio must be >= -50% if( dtmp < -50.0 ) dtmp = -50.0; // A margin ratio is always <= 0 // 0 means use full pad copper area if( dtmp > 0.0 ) dtmp = 0.0; aPad->SetLocalSolderPasteMarginRatio( dtmp / 100 ); switch( m_ZoneConnectionChoice->GetSelection() ) { default: case 0: aPad->SetZoneConnection( PAD_ZONE_CONN_INHERITED ); break; case 1: aPad->SetZoneConnection( PAD_ZONE_CONN_FULL ); break; case 2: aPad->SetZoneConnection( PAD_ZONE_CONN_THERMAL ); break; case 3: aPad->SetZoneConnection( PAD_ZONE_CONN_NONE ); break; } aPad->SetPosition( wxPoint( m_posX.GetValue(), m_posY.GetValue() ) ); aPad->SetPos0( wxPoint( m_posX.GetValue(), m_posY.GetValue() ) ); if( m_holeShapeCtrl->GetSelection() == 0 ) { aPad->SetDrillShape( PAD_DRILL_SHAPE_CIRCLE ); aPad->SetDrillSize( wxSize( m_holeX.GetValue(), m_holeX.GetValue() ) ); } else { aPad->SetDrillShape( PAD_DRILL_SHAPE_OBLONG ); aPad->SetDrillSize( wxSize( m_holeX.GetValue(), m_holeY.GetValue() ) ); } if( aPad->GetShape() == PAD_SHAPE_CIRCLE ) aPad->SetSize( wxSize( m_sizeX.GetValue(), m_sizeX.GetValue() ) ); else aPad->SetSize( wxSize( m_sizeX.GetValue(), m_sizeY.GetValue() ) ); // Read pad length die aPad->SetPadToDieLength( m_padToDie.GetValue() ); // For a trapezoid, test delta value (be sure delta is not too large for pad size) // remember DeltaSize.x is the Y size variation bool error = false; if( aPad->GetShape() == PAD_SHAPE_TRAPEZOID ) { wxSize delta; // For a trapezoid, only one of delta.x or delta.y is not 0, depending on // the direction. if( m_trapAxisCtrl->GetSelection() == 0 ) delta.x = m_trapDelta.GetValue(); else delta.y = m_trapDelta.GetValue(); if( delta.x < 0 && delta.x <= -aPad->GetSize().y ) { delta.x = -aPad->GetSize().y + 2; error = true; } if( delta.x > 0 && delta.x >= aPad->GetSize().y ) { delta.x = aPad->GetSize().y - 2; error = true; } if( delta.y < 0 && delta.y <= -aPad->GetSize().x ) { delta.y = -aPad->GetSize().x + 2; error = true; } if( delta.y > 0 && delta.y >= aPad->GetSize().x ) { delta.y = aPad->GetSize().x - 2; error = true; } aPad->SetDelta( delta ); } aPad->SetOffset( wxPoint( m_offsetX.GetValue(), m_offsetY.GetValue() ) ); aPad->SetOrientation( m_OrientValue * 10.0 ); aPad->SetName( m_PadNumCtrl->GetValue() ); aPad->SetNetCode( m_PadNetSelector->GetSelectedNetcode() ); int chamfers = 0; if( m_cbTopLeft->GetValue() ) chamfers |= RECT_CHAMFER_TOP_LEFT; if( m_cbTopRight->GetValue() ) chamfers |= RECT_CHAMFER_TOP_RIGHT; if( m_cbBottomLeft->GetValue() ) chamfers |= RECT_CHAMFER_BOTTOM_LEFT; if( m_cbBottomRight->GetValue() ) chamfers |= RECT_CHAMFER_BOTTOM_RIGHT; aPad->SetChamferPositions( chamfers ); // Clear some values, according to the pad type and shape switch( aPad->GetShape() ) { case PAD_SHAPE_CIRCLE: aPad->SetOffset( wxPoint( 0, 0 ) ); aPad->SetDelta( wxSize( 0, 0 ) ); break; case PAD_SHAPE_RECT: aPad->SetDelta( wxSize( 0, 0 ) ); break; case PAD_SHAPE_OVAL: aPad->SetDelta( wxSize( 0, 0 ) ); break; case PAD_SHAPE_TRAPEZOID: break; case PAD_SHAPE_ROUNDRECT: case PAD_SHAPE_CHAMFERED_RECT: aPad->SetDelta( wxSize( 0, 0 ) ); break; case PAD_SHAPE_CUSTOM: aPad->SetOffset( wxPoint( 0, 0 ) ); aPad->SetDelta( wxSize( 0, 0 ) ); // The pad custom has a "anchor pad" (a basic shape: round or rect pad) // that is the minimal area of this pad, and is usefull to ensure a hole // diameter is acceptable, and is used in Gerber files as flashed area // reference if( aPad->GetAnchorPadShape() == PAD_SHAPE_CIRCLE ) aPad->SetSize( wxSize( m_sizeX.GetValue(), m_sizeX.GetValue() ) ); // define the way the clearance area is defined in zones aPad->SetCustomShapeInZoneOpt( m_ZoneCustomPadShape->GetSelection() == 0 ? CUST_PAD_SHAPE_IN_ZONE_OUTLINE : CUST_PAD_SHAPE_IN_ZONE_CONVEXHULL ); break; default: ; } switch( aPad->GetAttribute() ) { case PAD_ATTRIB_STANDARD: break; case PAD_ATTRIB_CONN: case PAD_ATTRIB_SMD: // SMD and PAD_ATTRIB_CONN has no hole. // basically, SMD and PAD_ATTRIB_CONN are same type of pads // PAD_ATTRIB_CONN has just a default non technical layers that differs from SMD // and are intended to be used in virtual edge board connectors // However we can accept a non null offset, // mainly to allow complex pads build from a set of basic pad shapes aPad->SetDrillSize( wxSize( 0, 0 ) ); break; case PAD_ATTRIB_HOLE_NOT_PLATED: // Mechanical purpose only: // no offset, no net name, no pad name allowed aPad->SetOffset( wxPoint( 0, 0 ) ); aPad->SetName( wxEmptyString ); aPad->SetNetCode( NETINFO_LIST::UNCONNECTED ); break; default: DisplayError( NULL, wxT( "Error: unknown pad type" ) ); break; } if( aPad->GetShape() == PAD_SHAPE_ROUNDRECT || aPad->GetShape() == PAD_SHAPE_CHAMFERED_RECT ) { wxString value = m_tcCornerSizeRatio->GetValue(); double ratioPercent; if( value.ToDouble( &ratioPercent ) ) aPad->SetRoundRectRadiusRatio( ratioPercent / 100.0 ); value = m_tcChamferRatio->GetValue(); if( value.ToDouble( &ratioPercent ) ) aPad->SetChamferRectRatio( ratioPercent / 100.0 ); } LSET padLayerMask; switch( m_rbCopperLayersSel->GetSelection() ) { case 0: padLayerMask.set( F_Cu ); break; case 1: padLayerMask.set( B_Cu ); break; case 2: padLayerMask |= LSET::AllCuMask(); break; case 3: break; // No copper layers } if( m_PadLayerAdhCmp->GetValue() ) padLayerMask.set( F_Adhes ); if( m_PadLayerAdhCu->GetValue() ) padLayerMask.set( B_Adhes ); if( m_PadLayerPateCmp->GetValue() ) padLayerMask.set( F_Paste ); if( m_PadLayerPateCu->GetValue() ) padLayerMask.set( B_Paste ); if( m_PadLayerSilkCmp->GetValue() ) padLayerMask.set( F_SilkS ); if( m_PadLayerSilkCu->GetValue() ) padLayerMask.set( B_SilkS ); if( m_PadLayerMaskCmp->GetValue() ) padLayerMask.set( F_Mask ); if( m_PadLayerMaskCu->GetValue() ) padLayerMask.set( B_Mask ); if( m_PadLayerECO1->GetValue() ) padLayerMask.set( Eco1_User ); if( m_PadLayerECO2->GetValue() ) padLayerMask.set( Eco2_User ); if( m_PadLayerDraft->GetValue() ) padLayerMask.set( Dwgs_User ); aPad->SetLayerSet( padLayerMask ); return error; } void DIALOG_PAD_PROPERTIES::OnValuesChanged( wxCommandEvent& event ) { if( m_canUpdate ) { transferDataToPad( m_dummyPad ); // If the pad size has changed, update the displayed values // for rounded rect pads updateRoundRectCornerValues(); redraw(); } } void DIALOG_PAD_PROPERTIES::editPrimitive() { long select = m_listCtrlPrimitives->GetFirstSelected(); if( select < 0 ) { wxMessageBox( _( "No shape selected" ) ); return; } PAD_CS_PRIMITIVE& shape = m_primitives[select]; if( shape.m_Shape == S_POLYGON ) { DIALOG_PAD_PRIMITIVE_POLY_PROPS dlg( this, m_parent, &shape ); if( dlg.ShowModal() != wxID_OK ) return; dlg.TransferDataFromWindow(); } else { DIALOG_PAD_PRIMITIVES_PROPERTIES dlg( this, m_parent, &shape ); if( dlg.ShowModal() != wxID_OK ) return; dlg.TransferDataFromWindow(); } displayPrimitivesList(); if( m_canUpdate ) { transferDataToPad( m_dummyPad ); redraw(); } } void DIALOG_PAD_PROPERTIES::OnPrimitiveSelection( wxListEvent& event ) { // Called on a double click on the basic shapes list // To Do: highligth the primitive(s) currently selected. redraw(); } /// Called on a double click on the basic shapes list void DIALOG_PAD_PROPERTIES::onPrimitiveDClick( wxMouseEvent& event ) { editPrimitive(); } // Called on a click on basic shapes list panel button void DIALOG_PAD_PROPERTIES::onEditPrimitive( wxCommandEvent& event ) { editPrimitive(); } // Called on a click on basic shapes list panel button void DIALOG_PAD_PROPERTIES::onDeletePrimitive( wxCommandEvent& event ) { long select = m_listCtrlPrimitives->GetFirstSelected(); if( select < 0 ) return; // Multiple selections are allowed. get them and remove corresponding shapes std::vector indexes; indexes.push_back( select ); while( ( select = m_listCtrlPrimitives->GetNextSelected( select ) ) >= 0 ) indexes.push_back( select ); // Erase all select shapes for( unsigned ii = indexes.size(); ii > 0; --ii ) m_primitives.erase( m_primitives.begin() + indexes[ii-1] ); displayPrimitivesList(); if( m_canUpdate ) { transferDataToPad( m_dummyPad ); redraw(); } } void DIALOG_PAD_PROPERTIES::onAddPrimitive( wxCommandEvent& event ) { // Ask user for shape type wxString shapelist[] = { _( "Segment" ), _( "Arc" ), _( "Bezier" ), _( "Ring/Circle" ), _( "Polygon" ) }; int type = wxGetSingleChoiceIndex( _( "Shape type:" ), _( "Add Primitive" ), arrayDim( shapelist ), shapelist, 0, this ); // User pressed cancel if( type == -1 ) return; STROKE_T listtype[] = { S_SEGMENT, S_ARC, S_CURVE, S_CIRCLE, S_POLYGON }; PAD_CS_PRIMITIVE primitive( listtype[type] ); primitive.m_Thickness = m_board->GetDesignSettings().GetLineThickness( F_Cu ); if( listtype[type] == S_POLYGON ) { DIALOG_PAD_PRIMITIVE_POLY_PROPS dlg( this, m_parent, &primitive ); if( dlg.ShowModal() != wxID_OK ) return; } else { DIALOG_PAD_PRIMITIVES_PROPERTIES dlg( this, m_parent, &primitive ); if( dlg.ShowModal() != wxID_OK ) return; } m_primitives.push_back( primitive ); displayPrimitivesList(); if( m_canUpdate ) { transferDataToPad( m_dummyPad ); redraw(); } } void DIALOG_PAD_PROPERTIES::onGeometryTransform( wxCommandEvent& event ) { long select = m_listCtrlPrimitives->GetFirstSelected(); if( select < 0 ) { wxMessageBox( _( "No shape selected" ) ); return; } // Multiple selections are allowed. Build selected shapes list std::vector shapeList; shapeList.push_back( &m_primitives[select] ); while( ( select = m_listCtrlPrimitives->GetNextSelected( select ) ) >= 0 ) shapeList.push_back( &m_primitives[select] ); DIALOG_PAD_PRIMITIVES_TRANSFORM dlg( this, m_parent, shapeList, false ); if( dlg.ShowModal() != wxID_OK ) return; // Transfert new settings: dlg.Transform(); displayPrimitivesList(); if( m_canUpdate ) { transferDataToPad( m_dummyPad ); redraw(); } } void DIALOG_PAD_PROPERTIES::onDuplicatePrimitive( wxCommandEvent& event ) { long select = m_listCtrlPrimitives->GetFirstSelected(); if( select < 0 ) { wxMessageBox( _( "No shape selected" ) ); return; } // Multiple selections are allowed. Build selected shapes list std::vector shapeList; shapeList.push_back( &m_primitives[select] ); while( ( select = m_listCtrlPrimitives->GetNextSelected( select ) ) >= 0 ) shapeList.push_back( &m_primitives[select] ); DIALOG_PAD_PRIMITIVES_TRANSFORM dlg( this, m_parent, shapeList, true ); if( dlg.ShowModal() != wxID_OK ) return; // Transfer new settings // save duplicates to a separate vector to avoid m_primitives reallocation, // as shapeList contains pointers to its elements std::vector duplicates; dlg.Transform( &duplicates, dlg.GetDuplicateCount() ); std::move( duplicates.begin(), duplicates.end(), std::back_inserter( m_primitives ) ); displayPrimitivesList(); if( m_canUpdate ) { transferDataToPad( m_dummyPad ); redraw(); } }