/* * This program source code file is part of KiCad, a free EDA CAD application. * * Copyright (C) 2012 Jean-Pierre Charras, jean-pierre.charras@ujf-grenoble.fr * Copyright (C) 2012 SoftPLC Corporation, Dick Hollenbeck * Copyright (C) 2012 Wayne Stambaugh * Copyright (C) 1992-2012 KiCad Developers, see AUTHORS.txt for contributors. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, you may find one here: * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html * or you may search the http://www.gnu.org website for the version 2 license, * or you may write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA */ /** * @file export_gencad.cpp * @brief Export GenCAD 1.4 format. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include static bool CreateHeaderInfoData( FILE* aFile, PCB_EDIT_FRAME* frame ); static void CreateArtworksSection( FILE* aFile ); static void CreateTracksInfoData( FILE* aFile, BOARD* aPcb ); static void CreateBoardSection( FILE* aFile, BOARD* aPcb ); static void CreateComponentsSection( FILE* aFile, BOARD* aPcb ); static void CreateDevicesSection( FILE* aFile, BOARD* aPcb ); static void CreateRoutesSection( FILE* aFile, BOARD* aPcb ); static void CreateSignalsSection( FILE* aFile, BOARD* aPcb ); static void CreateShapesSection( FILE* aFile, BOARD* aPcb ); static void CreatePadsShapesSection( FILE* aFile, BOARD* aPcb ); static void FootprintWriteShape( FILE* File, MODULE* module ); // layer name for Gencad export static const wxString GenCADLayerName[32] = { wxT( "BOTTOM" ), wxT( "INNER1" ), wxT( "INNER2" ), wxT( "INNER3" ), wxT( "INNER4" ), wxT( "INNER5" ), wxT( "INNER6" ), wxT( "INNER7" ), wxT( "INNER8" ), wxT( "INNER9" ), wxT( "INNER10" ), wxT( "INNER11" ), wxT( "INNER12" ), wxT( "INNER13" ), wxT( "INNER14" ), wxT( "TOP" ), wxT( "LAYER17" ), wxT( "LAYER18" ), wxT( "SOLDERPASTE_BOTTOM" ), wxT( "SOLDERPASTE_TOP" ), wxT( "SILKSCREEN_BOTTOM" ), wxT( "SILKSCREEN_TOP" ), wxT( "SOLDERMASK_BOTTOM" ), wxT( "SOLDERMASK_TOP" ), wxT( "LAYER25" ), wxT( "LAYER26" ), wxT( "LAYER27" ), wxT( "LAYER28" ), wxT( "LAYER29" ), wxT( "LAYER30" ), wxT( "LAYER31" ), wxT( "LAYER32" ) }; // flipped layer name for Gencad export (to make CAM350 imports correct) static const wxString GenCADLayerNameFlipped[32] = { wxT( "TOP" ), wxT( "INNER14" ), wxT( "INNER13" ), wxT( "INNER12" ), wxT( "INNER11" ), wxT( "INNER10" ), wxT( "INNER9" ), wxT( "INNER8" ), wxT( "INNER7" ), wxT( "INNER6" ), wxT( "INNER5" ), wxT( "INNER4" ), wxT( "INNER3" ), wxT( "INNER2" ), wxT( "INNER1" ), wxT( "BOTTOM" ), wxT( "LAYER17" ), wxT( "LAYER18" ), wxT( "SOLDERPASTE_TOP" ), wxT( "SOLDERPASTE_BOTTOM" ), wxT( "SILKSCREEN_TOP" ), wxT( "SILKSCREEN_BOTTOM" ), wxT( "SOLDERMASK_TOP" ), wxT( "SOLDERMASK_BOTTOM" ), wxT( "LAYER25" ), wxT( "LAYER26" ), wxT( "LAYER27" ), wxT( "LAYER28" ), wxT( "LAYER29" ), wxT( "LAYER30" ), wxT( "LAYER31" ), wxT( "LAYER32" ) }; // These are the export origin (the auxiliary axis) static int GencadOffsetX, GencadOffsetY; /* GerbTool chokes on units different than INCH so this is the conversion * factor */ const static double SCALE_FACTOR = 10000.0 * IU_PER_DECIMILS; /* Two helper functions to calculate coordinates of modules in gencad values * (GenCAD Y axis from bottom to top) */ static double MapXTo( int aX ) { return (aX - GencadOffsetX) / SCALE_FACTOR; } static double MapYTo( int aY ) { return (GencadOffsetY - aY) / SCALE_FACTOR; } /* Driver function: processing starts here */ void PCB_EDIT_FRAME::ExportToGenCAD( wxCommandEvent& aEvent ) { wxFileName fn = GetBoard()->GetFileName(); wxString msg, ext, wildcard; FILE* file; ext = wxT( "cad" ); wildcard = _( "GenCAD 1.4 board files (.cad)|*.cad" ); fn.SetExt( ext ); wxFileDialog dlg( this, _( "Save GenCAD Board File" ), wxGetCwd(), fn.GetFullName(), wildcard, wxFD_SAVE | wxFD_OVERWRITE_PROMPT ); if( dlg.ShowModal() == wxID_CANCEL ) return; if( ( file = wxFopen( dlg.GetPath(), wxT( "wt" ) ) ) == NULL ) { msg = _( "Unable to create " ) + dlg.GetPath(); DisplayError( this, msg ); return; } SetLocaleTo_C_standard(); // No pesky decimal separators in gencad // Update some board data, to ensure a reliable gencad export GetBoard()->ComputeBoundingBox(); // Save the auxiliary origin for the rest of the module GencadOffsetX = GetOriginAxisPosition().x; GencadOffsetY = GetOriginAxisPosition().y; // No idea on *why* this should be needed... maybe to fix net names? Compile_Ratsnest( NULL, true ); /* Temporary modification of footprints that are flipped (i.e. on bottom * layer) to convert them to non flipped footprints. * This is necessary to easily export shapes to GenCAD, * that are given as normal orientation (non flipped, rotation = 0)) * these changes will be undone later */ BOARD* pcb = GetBoard(); MODULE* module; for( module = pcb->m_Modules; module != NULL; module = module->Next() ) { module->SetFlag( 0 ); if( module->GetLayer() == LAYER_N_BACK ) { module->Flip( module->GetPosition() ); module->SetFlag( 1 ); } } /* Gencad has some mandatory and some optional sections: some importer * need the padstack section (which is optional) anyway. Also the * order of the section *is* important */ CreateHeaderInfoData( file, this ); // Gencad header CreateBoardSection( file, pcb ); // Board perimeter CreatePadsShapesSection( file, pcb ); // Pads and padstacks CreateArtworksSection( file ); // Empty but mandatory /* Gencad splits a component info in shape, component and device. * We don't do any sharing (it would be difficult since each module is * customizable after placement) */ CreateShapesSection( file, pcb ); CreateComponentsSection( file, pcb ); CreateDevicesSection( file, pcb ); // In a similar way the netlist is split in net, track and route CreateSignalsSection( file, pcb ); CreateTracksInfoData( file, pcb ); CreateRoutesSection( file, pcb ); fclose( file ); SetLocaleTo_Default(); // revert to the current locale // Undo the footprints modifications (flipped footprints) for( module = pcb->m_Modules; module != NULL; module = module->Next() ) { if( module->GetFlag() ) { module->Flip( module->GetPosition() ); module->SetFlag( 0 ); } } } // Comparator for sorting pads with qsort static int PadListSortByShape( const void* aRefptr, const void* aObjptr ) { const D_PAD* padref = *(D_PAD**) aRefptr; const D_PAD* padcmp = *(D_PAD**) aObjptr; return D_PAD::Compare( padref, padcmp ); } // Sort vias for uniqueness static int ViaSort( const void* aRefptr, const void* aObjptr ) { TRACK* padref = *(TRACK**) aRefptr; TRACK* padcmp = *(TRACK**) aObjptr; if( padref->GetWidth() != padcmp->GetWidth() ) return padref->GetWidth() - padcmp->GetWidth(); if( padref->GetDrillValue() != padcmp->GetDrillValue() ) return padref->GetDrillValue() - padcmp->GetDrillValue(); if( padref->ReturnMaskLayer() != padcmp->ReturnMaskLayer() ) return padref->ReturnMaskLayer() - padcmp->ReturnMaskLayer(); return 0; } // The ARTWORKS section is empty but (officially) mandatory static void CreateArtworksSection( FILE* aFile ) { /* The artworks section is empty */ fputs( "$ARTWORKS\n", aFile ); fputs( "$ENDARTWORKS\n\n", aFile ); } // Emit PADS and PADSTACKS. They are sorted and emitted uniquely. // Via name is synthesized from their attributes, pads are numbered static void CreatePadsShapesSection( FILE* aFile, BOARD* aPcb ) { std::vector pads; std::vector padstacks; std::vector vias; std::vector viastacks; padstacks.resize( 1 ); // We count pads from 1 // The master layermask (i.e. the enabled layers) for padstack generation unsigned master_layermask = aPcb->GetDesignSettings().GetEnabledLayers(); fputs( "$PADS\n", aFile ); // Enumerate and sort the pads if( aPcb->GetPadCount() > 0 ) { pads = aPcb->GetPads(); qsort( &pads[0], aPcb->GetPadCount(), sizeof( D_PAD* ), PadListSortByShape ); } // The same for vias for( TRACK* track = aPcb->m_Track; track != NULL; track = track->Next() ) { if( track->Type() == PCB_VIA_T ) { vias.push_back( track ); } } qsort( &vias[0], vias.size(), sizeof(TRACK*), ViaSort ); // Emit vias pads TRACK* old_via = 0; for( unsigned i = 0; i < vias.size(); i++ ) { TRACK* via = vias[i]; if( old_via && 0 == ViaSort( &old_via, &via ) ) continue; old_via = via; viastacks.push_back( via ); fprintf( aFile, "PAD V%d.%d.%X ROUND %g\nCIRCLE 0 0 %g\n", via->GetWidth(), via->GetDrillValue(), via->ReturnMaskLayer(), via->GetDrillValue() / SCALE_FACTOR, via->GetWidth() / (SCALE_FACTOR * 2) ); } // Emit component pads D_PAD* old_pad = 0; int pad_name_number = 0; for( unsigned i = 0; iSetSubRatsnest( pad_name_number ); if( old_pad && 0==D_PAD::Compare( old_pad, pad ) ) continue; // already created old_pad = pad; pad_name_number++; pad->SetSubRatsnest( pad_name_number ); fprintf( aFile, "PAD P%d", pad->GetSubRatsnest() ); padstacks.push_back( pad ); // Will have its own padstack later int dx = pad->GetSize().x / 2; int dy = pad->GetSize().y / 2; switch( pad->GetShape() ) { default: case PAD_CIRCLE: fprintf( aFile, " ROUND %g\n", pad->GetDrillSize().x / SCALE_FACTOR ); /* Circle is center, radius */ fprintf( aFile, "CIRCLE %g %g %g\n", pad->GetOffset().x / SCALE_FACTOR, -pad->GetOffset().y / SCALE_FACTOR, pad->GetSize().x / (SCALE_FACTOR * 2) ); break; case PAD_RECT: fprintf( aFile, " RECTANGULAR %g\n", pad->GetDrillSize().x / SCALE_FACTOR ); // Rectangle is begin, size *not* begin, end! fprintf( aFile, "RECTANGLE %g %g %g %g\n", (-dx + pad->GetOffset().x ) / SCALE_FACTOR, (-dy - pad->GetOffset().y ) / SCALE_FACTOR, dx / (SCALE_FACTOR / 2), dy / (SCALE_FACTOR / 2) ); break; case PAD_OVAL: // Create outline by 2 lines and 2 arcs { // OrCAD Layout call them OVAL or OBLONG - GenCAD call them FINGERs fprintf( aFile, " FINGER %g\n", pad->GetDrillSize().x / SCALE_FACTOR ); int dr = dx - dy; if( dr >= 0 ) // Horizontal oval { int radius = dy; fprintf( aFile, "LINE %g %g %g %g\n", (-dr + pad->GetOffset().x) / SCALE_FACTOR, (-pad->GetOffset().y - radius) / SCALE_FACTOR, (dr + pad->GetOffset().x ) / SCALE_FACTOR, (-pad->GetOffset().y - radius) / SCALE_FACTOR ); // GenCAD arcs are (start, end, center) fprintf( aFile, "ARC %g %g %g %g %g %g\n", (dr + pad->GetOffset().x) / SCALE_FACTOR, (-pad->GetOffset().y - radius) / SCALE_FACTOR, (dr + pad->GetOffset().x) / SCALE_FACTOR, (-pad->GetOffset().y + radius) / SCALE_FACTOR, (dr + pad->GetOffset().x) / SCALE_FACTOR, -pad->GetOffset().y / SCALE_FACTOR ); fprintf( aFile, "LINE %g %g %g %g\n", (dr + pad->GetOffset().x) / SCALE_FACTOR, (-pad->GetOffset().y + radius) / SCALE_FACTOR, (-dr + pad->GetOffset().x) / SCALE_FACTOR, (-pad->GetOffset().y + radius) / SCALE_FACTOR ); fprintf( aFile, "ARC %g %g %g %g %g %g\n", (-dr + pad->GetOffset().x) / SCALE_FACTOR, (-pad->GetOffset().y + radius) / SCALE_FACTOR, (-dr + pad->GetOffset().x) / SCALE_FACTOR, (-pad->GetOffset().y - radius) / SCALE_FACTOR, (-dr + pad->GetOffset().x) / SCALE_FACTOR, -pad->GetOffset().y / SCALE_FACTOR ); } else // Vertical oval { dr = -dr; int radius = dx; fprintf( aFile, "LINE %g %g %g %g\n", (-radius + pad->GetOffset().x) / SCALE_FACTOR, (-pad->GetOffset().y - dr) / SCALE_FACTOR, (-radius + pad->GetOffset().x ) / SCALE_FACTOR, (-pad->GetOffset().y + dr) / SCALE_FACTOR ); fprintf( aFile, "ARC %g %g %g %g %g %g\n", (-radius + pad->GetOffset().x ) / SCALE_FACTOR, (-pad->GetOffset().y + dr) / SCALE_FACTOR, (radius + pad->GetOffset().x ) / SCALE_FACTOR, (-pad->GetOffset().y + dr) / SCALE_FACTOR, pad->GetOffset().x / SCALE_FACTOR, (-pad->GetOffset().y + dr) / SCALE_FACTOR ); fprintf( aFile, "LINE %g %g %g %g\n", (radius + pad->GetOffset().x) / SCALE_FACTOR, (-pad->GetOffset().y + dr) / SCALE_FACTOR, (radius + pad->GetOffset().x) / SCALE_FACTOR, (-pad->GetOffset().y - dr) / SCALE_FACTOR ); fprintf( aFile, "ARC %g %g %g %g %g %g\n", (radius + pad->GetOffset().x) / SCALE_FACTOR, (-pad->GetOffset().y - dr) / SCALE_FACTOR, (-radius + pad->GetOffset().x) / SCALE_FACTOR, (-pad->GetOffset().y - dr) / SCALE_FACTOR, pad->GetOffset().x / SCALE_FACTOR, (-pad->GetOffset().y - dr) / SCALE_FACTOR ); } break; } case PAD_TRAPEZOID: fprintf( aFile, " POLYGON %g\n", pad->GetDrillSize().x / SCALE_FACTOR ); // XXX TO BE IMPLEMENTED! and I don't know if it could be actually imported by something break; } } fputs( "\n$ENDPADS\n\n", aFile ); // Now emit the padstacks definitions, using the combined layer masks fputs( "$PADSTACKS\n", aFile ); // Via padstacks for( unsigned i = 0; i < viastacks.size(); i++ ) { TRACK* via = viastacks[i]; unsigned mask = via->ReturnMaskLayer() & master_layermask; fprintf( aFile, "PADSTACK VIA%d.%d.%X %g\n", via->GetWidth(), via->GetDrillValue(), mask, via->GetDrillValue() / SCALE_FACTOR ); for( int layer = 0; layer < 32; layer++ ) { if( mask & (1 << layer) ) { fprintf( aFile, "PAD V%d.%d.%X %s 0 0\n", via->GetWidth(), via->GetDrillValue(), mask, TO_UTF8( GenCADLayerName[layer] ) ); } } } /* Component padstacks * CAM350 don't apply correctly the FLIP semantics for padstacks, i.e. doesn't * swap the top and bottom layers... so I need to define the shape as MIRRORX * and define a separate 'flipped' padstack... until it appears yet another * noncompliant importer */ for( unsigned i = 1; i < padstacks.size(); i++ ) { D_PAD* pad = padstacks[i]; // Straight padstack fprintf( aFile, "PADSTACK PAD%d %g\n", i, pad->GetDrillSize().x / SCALE_FACTOR ); for( int layer = 0; layer < 32; layer++ ) { if( pad->GetLayerMask() & (1 << layer) & master_layermask ) { fprintf( aFile, "PAD P%d %s 0 0\n", i, TO_UTF8( GenCADLayerName[layer] ) ); } } // Flipped padstack fprintf( aFile, "PADSTACK PAD%dF %g\n", i, pad->GetDrillSize().x / SCALE_FACTOR ); for( int layer = 0; layer < 32; layer++ ) { if( pad->GetLayerMask() & (1 << layer) & master_layermask ) { fprintf( aFile, "PAD P%d %s 0 0\n", i, TO_UTF8( GenCADLayerNameFlipped[layer] ) ); } } } fputs( "$ENDPADSTACKS\n\n", aFile ); } /* Creates the footprint shape list. * Since module shape is customizable after the placement we cannot share them; * instead we opt for the one-module-one-shape-one-component-one-device approach */ static void CreateShapesSection( FILE* aFile, BOARD* aPcb ) { MODULE* module; D_PAD* pad; const char* layer; int orient; wxString pinname; const char* mirror = "0"; fputs( "$SHAPES\n", aFile ); for( module = aPcb->m_Modules; module != NULL; module = module->Next() ) { FootprintWriteShape( aFile, module ); for( pad = module->Pads(); pad != NULL; pad = pad->Next() ) { /* Funny thing: GenCAD requires the pad side even if you use * padstacks (which are theorically optional but gerbtools *requires* them). Now the trouble thing is that 'BOTTOM' * is interpreted by someone as a padstack flip even * if the spec explicitly says it's not... */ layer = "ALL"; if( ( pad->GetLayerMask() & ALL_CU_LAYERS ) == LAYER_BACK ) { layer = ( module->GetFlag() ) ? "TOP" : "BOTTOM"; } else if( ( pad->GetLayerMask() & ALL_CU_LAYERS ) == LAYER_FRONT ) { layer = ( module->GetFlag() ) ? "BOTTOM" : "TOP"; } pad->ReturnStringPadName( pinname ); if( pinname.IsEmpty() ) pinname = wxT( "none" ); orient = pad->GetOrientation() - module->GetOrientation(); NORMALIZE_ANGLE_POS( orient ); // Bottom side modules use the flipped padstack fprintf( aFile, (module->GetFlag()) ? "PIN %s PAD%dF %g %g %s %g %s\n" : "PIN %s PAD%d %g %g %s %g %s\n", TO_UTF8( pinname ), pad->GetSubRatsnest(), pad->GetPos0().x / SCALE_FACTOR, -pad->GetPos0().y / SCALE_FACTOR, layer, orient / 10.0, mirror ); } } fputs( "$ENDSHAPES\n\n", aFile ); } /* Creates the section $COMPONENTS (Footprints placement) * Bottom side components are difficult to handle: shapes must be mirrored or * flipped, silk layers need to be handled correctly and so on. Also it seems * that *noone* follows the specs... */ static void CreateComponentsSection( FILE* aFile, BOARD* aPcb ) { fputs( "$COMPONENTS\n", aFile ); for( MODULE* module = aPcb->m_Modules; module != NULL; module = module->Next() ) { TEXTE_MODULE* textmod; const char* mirror; const char* flip; int orient = module->GetOrientation(); if( module->GetFlag() ) { mirror = "0"; flip = "FLIP"; NEGATE_AND_NORMALIZE_ANGLE_POS( orient ); } else { mirror = "0"; flip = "0"; } fprintf( aFile, "\nCOMPONENT %s\n", TO_UTF8( module->GetReference() ) ); fprintf( aFile, "DEVICE %s_%s\n", TO_UTF8( module->GetReference() ), TO_UTF8( module->GetValue() ) ); fprintf( aFile, "PLACE %g %g\n", MapXTo( module->GetPosition().x ), MapYTo( module->GetPosition().y ) ); fprintf( aFile, "LAYER %s\n", (module->GetFlag()) ? "BOTTOM" : "TOP" ); fprintf( aFile, "ROTATION %g\n", orient / 10.0 ); fprintf( aFile, "SHAPE %s %s %s\n", TO_UTF8( module->GetReference() ), mirror, flip ); // Text on silk layer: RefDes and value (are they actually useful?) textmod = &module->Reference(); for( int ii = 0; ii < 2; ii++ ) { int orient = textmod->GetOrientation(); wxString layer = GenCADLayerName[(module->GetFlag()) ? SILKSCREEN_N_BACK : SILKSCREEN_N_FRONT]; fprintf( aFile, "TEXT %g %g %g %g %s %s \"%s\"", textmod->GetPos0().x / SCALE_FACTOR, -textmod->GetPos0().y / SCALE_FACTOR, textmod->GetSize().x / SCALE_FACTOR, orient / 10.0, mirror, TO_UTF8( layer ), TO_UTF8( textmod->GetText() ) ); // Please note, the width is approx fprintf( aFile, " 0 0 %g %g\n", ( textmod->GetSize().x * textmod->GetLength() ) / SCALE_FACTOR, textmod->GetSize().y / SCALE_FACTOR ); textmod = &module->Value(); // Dirty trick for the second iteration } // The SHEET is a 'generic description' for referencing the component fprintf( aFile, "SHEET \"RefDes: %s, Value: %s\"\n", TO_UTF8( module->GetReference() ), TO_UTF8( module->GetValue() ) ); } fputs( "$ENDCOMPONENTS\n\n", aFile ); } /* Emit the netlist (which is actually the thing for which GenCAD is used these * days!); tracks are handled later */ static void CreateSignalsSection( FILE* aFile, BOARD* aPcb ) { wxString msg; NETINFO_ITEM* net; D_PAD* pad; MODULE* module; int NbNoConn = 1; fputs( "$SIGNALS\n", aFile ); for( unsigned ii = 0; ii < aPcb->GetNetCount(); ii++ ) { net = aPcb->FindNet( ii ); if( net->GetNetname() == wxEmptyString ) // dummy netlist (no connection) { wxString msg; msg << wxT( "NoConnection" ) << NbNoConn++; net->SetNetname( msg ); } if( net->GetNet() <= 0 ) // dummy netlist (no connection) continue; msg = wxT( "SIGNAL " ) + net->GetNetname(); fputs( TO_UTF8( msg ), aFile ); fputs( "\n", aFile ); for( module = aPcb->m_Modules; module != NULL; module = module->Next() ) { for( pad = module->Pads(); pad != NULL; pad = pad->Next() ) { wxString padname; if( pad->GetNet() != net->GetNet() ) continue; pad->ReturnStringPadName( padname ); msg.Printf( wxT( "NODE %s %s" ), GetChars( module->GetReference() ), GetChars( padname ) ); fputs( TO_UTF8( msg ), aFile ); fputs( "\n", aFile ); } } } fputs( "$ENDSIGNALS\n\n", aFile ); } // Creates the header section static bool CreateHeaderInfoData( FILE* aFile, PCB_EDIT_FRAME* aFrame ) { wxString msg; BOARD *board = aFrame->GetBoard(); fputs( "$HEADER\n", aFile ); fputs( "GENCAD 1.4\n", aFile ); // Please note: GenCAD syntax requires quoted strings if they can contain spaces msg.Printf( wxT( "USER \"%s %s\"\n" ), GetChars( wxGetApp().GetAppName() ), GetChars( GetBuildVersion() ) ); fputs( TO_UTF8( msg ), aFile ); msg = wxT( "DRAWING \"" ) + board->GetFileName() + wxT( "\"\n" ); fputs( TO_UTF8( msg ), aFile ); const TITLE_BLOCK& tb = aFrame->GetTitleBlock(); msg = wxT( "REVISION \"" ) + tb.GetRevision() + wxT( " " ) + tb.GetDate() + wxT( "\"\n" ); fputs( TO_UTF8( msg ), aFile ); fputs( "UNITS INCH\n", aFile ); msg.Printf( wxT( "ORIGIN %g %g\n" ), MapXTo( aFrame->GetOriginAxisPosition().x ), MapYTo( aFrame->GetOriginAxisPosition().y ) ); fputs( TO_UTF8( msg ), aFile ); fputs( "INTERTRACK 0\n", aFile ); fputs( "$ENDHEADER\n\n", aFile ); return true; } /* * Sort function used to sort tracks segments: * items are sorted by netcode, then by width then by layer */ static int TrackListSortByNetcode( const void* refptr, const void* objptr ) { const TRACK* ref, * cmp; int diff; ref = *( (TRACK**) refptr ); cmp = *( (TRACK**) objptr ); if( ( diff = ref->GetNet() - cmp->GetNet() ) ) return diff; if( ( diff = ref->GetWidth() - cmp->GetWidth() ) ) return diff; if( ( diff = ref->GetLayer() - cmp->GetLayer() ) ) return diff; return 0; } /* Creates the section ROUTES * that handles tracks, vias * TODO: add zones * section: * $ROUTE * ... * $ENROUTE * Track segments must be sorted by nets */ static void CreateRoutesSection( FILE* aFile, BOARD* aPcb ) { TRACK* track, ** tracklist; int vianum = 1; int old_netcode, old_width, old_layer; int nbitems, ii; unsigned master_layermask = aPcb->GetDesignSettings().GetEnabledLayers(); // Count items nbitems = 0; for( track = aPcb->m_Track; track != NULL; track = track->Next() ) nbitems++; for( track = aPcb->m_Zone; track != NULL; track = track->Next() ) { if( track->Type() == PCB_ZONE_T ) nbitems++; } tracklist = (TRACK**) operator new( (nbitems + 1)* sizeof( TRACK* ) ); nbitems = 0; for( track = aPcb->m_Track; track != NULL; track = track->Next() ) tracklist[nbitems++] = track; for( track = aPcb->m_Zone; track != NULL; track = track->Next() ) { if( track->Type() == PCB_ZONE_T ) tracklist[nbitems++] = track; } tracklist[nbitems] = NULL; qsort( tracklist, nbitems, sizeof(TRACK*), TrackListSortByNetcode ); fputs( "$ROUTES\n", aFile ); old_netcode = -1; old_width = -1; old_layer = -1; for( ii = 0; ii < nbitems; ii++ ) { track = tracklist[ii]; if( old_netcode != track->GetNet() ) { old_netcode = track->GetNet(); NETINFO_ITEM* net = aPcb->FindNet( track->GetNet() ); wxString netname; if( net && (net->GetNetname() != wxEmptyString) ) netname = net->GetNetname(); else netname = wxT( "_noname_" ); fprintf( aFile, "ROUTE %s\n", TO_UTF8( netname ) ); } if( old_width != track->GetWidth() ) { old_width = track->GetWidth(); fprintf( aFile, "TRACK TRACK%d\n", track->GetWidth() ); } if( (track->Type() == PCB_TRACE_T) || (track->Type() == PCB_ZONE_T) ) { if( old_layer != track->GetLayer() ) { old_layer = track->GetLayer(); fprintf( aFile, "LAYER %s\n", TO_UTF8( GenCADLayerName[track->GetLayer() & 0x1F] ) ); } fprintf( aFile, "LINE %g %g %g %g\n", MapXTo( track->GetStart().x ), MapYTo( track->GetStart().y ), MapXTo( track->GetEnd().x ), MapYTo( track->GetEnd().y ) ); } if( track->Type() == PCB_VIA_T ) { fprintf( aFile, "VIA VIA%d.%d.%X %g %g ALL %g via%d\n", track->GetWidth(), track->GetDrillValue(), track->ReturnMaskLayer() & master_layermask, MapXTo( track->GetStart().x ), MapYTo( track->GetStart().y ), track->GetDrillValue() / SCALE_FACTOR, vianum++ ); } } fputs( "$ENDROUTES\n\n", aFile ); delete tracklist; } /* Creates the section $DEVICES * This is a list of footprints properties * ( Shapes are in section $SHAPE ) */ static void CreateDevicesSection( FILE* aFile, BOARD* aPcb ) { MODULE* module; fputs( "$DEVICES\n", aFile ); for( module = aPcb->m_Modules; module != NULL; module = module->Next() ) { fprintf( aFile, "DEVICE \"%s\"\n", TO_UTF8( module->GetReference() ) ); fprintf( aFile, "PART \"%s\"\n", TO_UTF8( module->GetValue() ) ); fprintf( aFile, "PACKAGE \"%s\"\n", TO_UTF8( module->GetLibRef() ) ); // The TYPE attribute is almost freeform const char* ty = "TH"; if( module->GetAttributes() & MOD_CMS ) ty = "SMD"; if( module->GetAttributes() & MOD_VIRTUAL ) ty = "VIRTUAL"; fprintf( aFile, "TYPE %s\n", ty ); } fputs( "$ENDDEVICES\n\n", aFile ); } /* Creates the section $BOARD. * We output here only the board perimeter */ static void CreateBoardSection( FILE* aFile, BOARD* aPcb ) { fputs( "$BOARD\n", aFile ); // Extract the board edges for( EDA_ITEM* drawing = aPcb->m_Drawings; drawing != 0; drawing = drawing->Next() ) { if( drawing->Type() == PCB_LINE_T ) { DRAWSEGMENT* drawseg = dynamic_cast( drawing ); if( drawseg->GetLayer() == EDGE_N ) { // XXX GenCAD supports arc boundaries but I've seen nothing that reads them fprintf( aFile, "LINE %g %g %g %g\n", MapXTo( drawseg->GetStart().x ), MapYTo( drawseg->GetStart().y ), MapXTo( drawseg->GetEnd().x ), MapYTo( drawseg->GetEnd().y ) ); } } } fputs( "$ENDBOARD\n\n", aFile ); } /* Creates the section "$TRACKS" * This sections give the list of widths (tools) used in tracks and vias * format: * $TRACK * TRACK * $ENDTRACK * * Each tool name is build like this: "TRACK" + track width. * For instance for a width = 120 : name = "TRACK120". */ static void CreateTracksInfoData( FILE* aFile, BOARD* aPcb ) { TRACK* track; int last_width = -1; // Find thickness used for traces // XXX could use the same sorting approach used for pads std::vector trackinfo; unsigned ii; for( track = aPcb->m_Track; track != NULL; track = track->Next() ) { if( last_width != track->GetWidth() ) // Find a thickness already used. { for( ii = 0; ii < trackinfo.size(); ii++ ) { if( trackinfo[ii] == track->GetWidth() ) break; } if( ii == trackinfo.size() ) // not found trackinfo.push_back( track->GetWidth() ); last_width = track->GetWidth(); } } for( track = aPcb->m_Zone; track != NULL; track = track->Next() ) { if( last_width != track->GetWidth() ) // Find a thickness already used. { for( ii = 0; ii < trackinfo.size(); ii++ ) { if( trackinfo[ii] == track->GetWidth() ) break; } if( ii == trackinfo.size() ) // not found trackinfo.push_back( track->GetWidth() ); last_width = track->GetWidth(); } } // Write data fputs( "$TRACKS\n", aFile ); for( ii = 0; ii < trackinfo.size(); ii++ ) { fprintf( aFile, "TRACK TRACK%d %g\n", trackinfo[ii], trackinfo[ii] / SCALE_FACTOR ); } fputs( "$ENDTRACKS\n\n", aFile ); } /* Creates the shape of a footprint (section SHAPE) * The shape is always given "normal" (Orient 0, not mirrored) * It's almost guaranteed that the silk layer will be imported wrong but * the shape also contains the pads! */ static void FootprintWriteShape( FILE* aFile, MODULE* module ) { EDGE_MODULE* PtEdge; EDA_ITEM* PtStruct; // Control Y axis change sign for flipped modules int Yaxis_sign = -1; // Flip for bottom side components if( module->GetFlag() ) Yaxis_sign = 1; /* creates header: */ fprintf( aFile, "\nSHAPE %s\n", TO_UTF8( module->GetReference() ) ); if( module->GetAttributes() & MOD_VIRTUAL ) { fprintf( aFile, "INSERT SMD\n" ); } else { if( module->GetAttributes() & MOD_CMS ) { fprintf( aFile, "INSERT SMD\n" ); } else { fprintf( aFile, "INSERT TH\n" ); } } #if 0 /* ATTRIBUTE name and value is unspecified and the original exporter * got the syntax wrong, so CAM350 rejected the whole shape! */ if( module->m_Attributs != MOD_DEFAULT ) { fprintf( aFile, "ATTRIBUTE" ); if( module->m_Attributs & MOD_CMS ) fprintf( aFile, " PAD_SMD" ); if( module->m_Attributs & MOD_VIRTUAL ) fprintf( aFile, " VIRTUAL" ); fprintf( aFile, "\n" ); } #endif // Silk outline; wildly interpreted by various importers: // CAM350 read it right but only closed shapes // ProntoPlace double-flip it (at least the pads are correct) // GerberTool usually get it right... for( PtStruct = module->GraphicalItems(); PtStruct != NULL; PtStruct = PtStruct->Next() ) { switch( PtStruct->Type() ) { case PCB_MODULE_TEXT_T: // If we wanted to export text, this is not the correct section break; case PCB_MODULE_EDGE_T: PtEdge = (EDGE_MODULE*) PtStruct; if( PtEdge->GetLayer() == SILKSCREEN_N_FRONT || PtEdge->GetLayer() == SILKSCREEN_N_BACK ) { switch( PtEdge->GetShape() ) { case S_SEGMENT: fprintf( aFile, "LINE %g %g %g %g\n", (PtEdge->m_Start0.x) / SCALE_FACTOR, (Yaxis_sign * PtEdge->m_Start0.y) / SCALE_FACTOR, (PtEdge->m_End0.x) / SCALE_FACTOR, (Yaxis_sign * PtEdge->m_End0.y ) / SCALE_FACTOR ); break; case S_CIRCLE: { int radius = (int) hypot( (double) ( PtEdge->m_End0.x - PtEdge->m_Start0.x ), (double) ( PtEdge->m_End0.y - PtEdge->m_Start0.y ) ); fprintf( aFile, "CIRCLE %g %g %g\n", PtEdge->m_Start0.x / SCALE_FACTOR, Yaxis_sign * PtEdge->m_Start0.y / SCALE_FACTOR, radius / SCALE_FACTOR ); break; } case S_ARC: { int arcendx, arcendy; arcendx = PtEdge->m_End0.x - PtEdge->m_Start0.x; arcendy = PtEdge->m_End0.y - PtEdge->m_Start0.y; RotatePoint( &arcendx, &arcendy, -PtEdge->GetAngle() ); arcendx += PtEdge->GetStart0().x; arcendy += PtEdge->GetStart0().y; if( Yaxis_sign == -1 ) { // Flipping Y flips the arc direction too fprintf( aFile, "ARC %g %g %g %g %g %g\n", (arcendx) / SCALE_FACTOR, (Yaxis_sign * arcendy) / SCALE_FACTOR, (PtEdge->m_End0.x) / SCALE_FACTOR, (Yaxis_sign * PtEdge->GetEnd0().y) / SCALE_FACTOR, (PtEdge->GetStart0().x) / SCALE_FACTOR, (Yaxis_sign * PtEdge->GetStart0().y) / SCALE_FACTOR ); } else { fprintf( aFile, "ARC %g %g %g %g %g %g\n", (PtEdge->GetEnd0().x) / SCALE_FACTOR, (Yaxis_sign * PtEdge->GetEnd0().y) / SCALE_FACTOR, (arcendx) / SCALE_FACTOR, (Yaxis_sign * arcendy) / SCALE_FACTOR, (PtEdge->GetStart0().x) / SCALE_FACTOR, (Yaxis_sign * PtEdge->GetStart0().y) / SCALE_FACTOR ); } break; } default: DisplayError( NULL, wxT( "Type Edge Module invalid." ) ); break; } } break; default: break; } } }