C++ 1 source_name 0 0 res UTF-8 connect panel_setup_constraints_base 1000 none 1 panel_setup_constraints_base . 1 1 1 1 UI 0 1 0 0 wxAUI_MGR_DEFAULT 1 1 impl_virtual 0 wxID_ANY PANEL_SETUP_CONSTRAINTS_BASE -1,-1 ; forward_declare 0 wxTAB_TRAVERSAL bMainSizer wxHORIZONTAL none 5 wxEXPAND | wxALL 1 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_scrolledWindow 1 public 1 Resizable 5 5 1 ; ; forward_declare 0 wxVSCROLL bScrolledSizer wxHORIZONTAL none 5 wxEXPAND|wxRIGHT 0 sbFeatureConstraints wxVERTICAL none 5 wxEXPAND|wxLEFT 1 4 wxBOTH 0 fgFeatureConstraints wxFLEX_GROWMODE_SPECIFIED none 0 0 4 wxALIGN_CENTER_HORIZONTAL|wxBOTTOM|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Copper 0 0 0 1 m_staticText23 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxEXPAND 1 0 protected 0 5 wxEXPAND 1 0 protected 0 5 wxEXPAND 1 0 protected 0 5 wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_bitmapClearance 1 protected 1 Resizable 1 ; ; forward_declare 0 5 wxALIGN_CENTER_VERTICAL|wxRIGHT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Minimum clearance: 0 0 0 1 m_clearanceTitle 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxALIGN_CENTER_VERTICAL|wxEXPAND|wxTOP|wxBOTTOM 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_clearanceCtrl 1 protected 1 Resizable 1 ; ; forward_declare 0 The minimum clearance between copper items which do not belong to the same net. If set, this is an absolute minimum which cannot be reduced by netclasses, custom rules, or other settings. wxFILTER_NONE wxDefaultValidator 5 wxALIGN_CENTER_VERTICAL|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY mm 0 0 0 1 m_clearanceUnits 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_bitmapMinTrackWidth 1 protected 1 Resizable 1 ; ; forward_declare 0 5 wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxRIGHT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Minimum track width: 0 0 0 1 m_TrackMinWidthTitle 1 protected 1 Resizable 1 wxALIGN_LEFT 0 -1 5 wxALIGN_LEFT|wxEXPAND|wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 120,-1 1 m_TrackMinWidthCtrl 1 protected 1 Resizable 1 0 The minimum track width. If set, this is an absolute minimum and cannot be reduced by netclasses, custom rules, or other settings. wxString wxFILTER_NUMERIC wxTextValidator 5 wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY mm 0 0 0 1 m_TrackMinWidthUnits 1 protected 1 Resizable 1 wxALIGN_LEFT 0 -1 5 wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_bitmapMinConn 1 protected 1 Resizable 1 ; ; forward_declare 0 5 wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxRIGHT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Minimum connection width: 0 0 0 1 m_MinConnTitle 1 protected 1 Resizable 1 wxALIGN_LEFT 0 -1 5 wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxBOTTOM|wxEXPAND|wxTOP 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 120,-1 1 m_MinConnCtrl 1 protected 1 Resizable 1 0 The minimum track width. If set, this is an absolute minimum and cannot be reduced by netclasses, custom rules, or other settings. wxString wxFILTER_NUMERIC wxTextValidator 5 wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY mm 0 0 0 1 m_MinConnUnits 1 protected 1 Resizable 1 wxALIGN_LEFT 0 -1 5 wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_bitmapMinViaAnnulus 1 protected 1 Resizable 1 ; ; forward_declare 0 5 wxALIGN_CENTER_VERTICAL|wxRIGHT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Minimum annular width: 0 0 0 1 m_ViaMinAnnulusTitle 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxALIGN_CENTER_VERTICAL|wxEXPAND|wxTOP|wxBOTTOM 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_ViaMinAnnulusCtrl 1 protected 1 Resizable 1 ; ; forward_declare 0 The minimum annular ring width. If set, this is an absolute minimum and cannot be reduced by netclasses, custom rules, or other settings. wxFILTER_NONE wxDefaultValidator 5 wxALIGN_CENTER_VERTICAL|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY mm 0 0 0 1 m_ViaMinAnnulusUnits 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_bitmapMinViaDiameter 1 protected 1 Resizable 1 ; ; forward_declare 0 5 wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxRIGHT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Minimum via diameter: 0 0 0 1 m_ViaMinTitle 1 protected 1 Resizable 1 wxALIGN_LEFT 0 -1 5 wxALIGN_CENTER_VERTICAL|wxEXPAND|wxTOP|wxBOTTOM 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_SetViasMinSizeCtrl 1 protected 1 Resizable 1 ; 0 The minimum via diameter. If set, this is an absolute minimum and cannot be reduced by netclasses, custom rules, or other settings. wxString wxFILTER_NUMERIC wxTextValidator 5 wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY mm 0 0 0 1 m_ViaMinUnits 1 protected 1 Resizable 1 wxALIGN_LEFT 0 -1 5 wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_bitmapHoleClearance 1 protected 1 Resizable 1 ; ; forward_declare 0 5 wxTOP|wxBOTTOM|wxRIGHT|wxALIGN_CENTER_VERTICAL 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Copper to hole clearance: 0 0 0 1 m_HoleClearanceLabel 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxEXPAND|wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_HoleClearanceCtrl 1 protected 1 Resizable 1 ; ; forward_declare 0 The minimum clearance between a hole and an unassociated copper item. If set, this is an absolute minimum and cannot be reduced by custom rules or other settings. wxFILTER_NONE wxDefaultValidator 5 wxALL|wxALIGN_CENTER_VERTICAL 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY mm 0 0 0 1 m_HoleClearanceUnits 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_bitmapEdgeClearance 1 protected 1 Resizable 1 ; ; forward_declare 0 5 wxALIGN_CENTER_VERTICAL|wxRIGHT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Copper to edge clearance: 0 0 0 1 m_EdgeClearanceLabel 1 protected 1 Resizable 1 ; forward_declare 0 -1 5 wxEXPAND|wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_EdgeClearanceCtrl 1 protected 1 Resizable 1 ; forward_declare 0 The minimum clearance between the board edge and any copper item. If set, this is an absolute minimum and cannot be reduced by custom rules or other settings. wxFILTER_NONE wxDefaultValidator 5 wxALIGN_CENTER_VERTICAL|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY mm 0 0 0 1 m_EdgeClearanceUnits 1 protected 1 Resizable 1 ; forward_declare 0 -1 10 wxTOP|wxEXPAND 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_staticline3 1 protected 1 Resizable 1 wxLI_HORIZONTAL ; ; forward_declare 0 10 wxEXPAND|wxTOP 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_staticline4 1 protected 1 Resizable 1 wxLI_HORIZONTAL ; ; forward_declare 0 10 wxEXPAND|wxTOP 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_staticline5 1 protected 1 Resizable 1 wxLI_HORIZONTAL ; ; forward_declare 0 10 wxEXPAND|wxTOP 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_staticline6 1 protected 1 Resizable 1 wxLI_HORIZONTAL ; ; forward_declare 0 4 wxALIGN_CENTER_HORIZONTAL|wxALL 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Holes 0 0 0 1 m_staticText24 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxEXPAND|wxTOP 1 0 protected 0 5 wxEXPAND|wxTOP 1 0 protected 0 5 wxEXPAND|wxTOP 1 0 protected 0 5 wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_bitmapMinViaDrill 1 protected 1 Resizable 1 ; ; forward_declare 0 5 wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxRIGHT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Minimum through hole: 0 0 0 1 m_MinDrillTitle 1 protected 1 Resizable 1 wxALIGN_LEFT 0 -1 5 wxEXPAND|wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_MinDrillCtrl 1 protected 1 Resizable 1 0 The minimum through-hole size. If set, this is an absolute minimum and cannot be reduced by netclasses, custom rules or other settings. wxFILTER_NUMERIC wxTextValidator 5 wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY mm 0 0 0 1 m_MinDrillUnits 1 protected 1 Resizable 1 wxALIGN_LEFT 0 -1 5 wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_bitmapMinHoleClearance 1 protected 1 Resizable 1 ; ; forward_declare 0 5 wxALIGN_CENTER_VERTICAL|wxRIGHT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Hole to hole clearance: 0 0 0 1 m_HoleToHoleTitle 1 protected 1 Resizable 1 ; forward_declare 0 -1 5 wxEXPAND|wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_SetHoleToHoleCtrl 1 protected 1 Resizable 1 ; forward_declare 0 The minimum clearance between two drilled holes. If set, this is an absolute minimum and cannot be reduced by custom rules or other settings. (Note: does not apply to milled holes.) wxFILTER_NONE wxDefaultValidator 5 wxALIGN_CENTER_VERTICAL|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY mm 0 0 0 1 m_HoleToHoleUnits 1 protected 1 Resizable 1 ; forward_declare 0 -1 10 wxEXPAND|wxTOP 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_staticline8 1 protected 1 Resizable 1 wxLI_HORIZONTAL ; ; forward_declare 0 10 wxEXPAND|wxTOP 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_staticline9 1 protected 1 Resizable 1 wxLI_HORIZONTAL ; ; forward_declare 0 10 wxEXPAND|wxTOP 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_staticline10 1 protected 1 Resizable 1 wxLI_HORIZONTAL ; ; forward_declare 0 10 wxEXPAND|wxTOP 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_staticline11 1 protected 1 Resizable 1 wxLI_HORIZONTAL ; ; forward_declare 0 4 wxALIGN_CENTER_HORIZONTAL|wxALL 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY uVias 0 0 0 1 m_staticText25 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxEXPAND|wxTOP 1 0 protected 0 5 wxEXPAND|wxTOP 1 0 protected 0 5 wxEXPAND|wxTOP 1 0 protected 0 5 wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_bitmapMinuViaDiameter 1 protected 1 Resizable 1 ; ; forward_declare 0 5 wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxRIGHT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Minimum uVia diameter: 0 0 0 1 m_uviaMinSizeLabel 1 protected 1 Resizable 1 wxALIGN_LEFT 0 -1 5 wxEXPAND|wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_uviaMinSizeCtrl 1 protected 1 Resizable 1 0 The minimum diameter for micro-vias. If set, this is an absolute minimum and cannot be reduced by netclasses, custom rules, or other settings. wxFILTER_NUMERIC wxTextValidator 5 wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY mm 0 0 0 1 m_uviaMinSizeUnits 1 protected 1 Resizable 1 wxALIGN_LEFT 0 -1 5 wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_bitmapMinuViaDrill 1 protected 1 Resizable 1 ; ; forward_declare 0 5 wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxRIGHT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Minimum uVia hole: 0 0 0 1 m_uviaMinDrillLabel 1 protected 1 Resizable 1 wxALIGN_LEFT 0 -1 5 wxEXPAND|wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_uviaMinDrillCtrl 1 protected 1 Resizable 1 0 The minimum micro-via hole size. If set, this is an absolute minimum and cannot be reduced by netclasses, custom rules, or other settings. wxFILTER_NUMERIC wxTextValidator 5 wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY mm 0 0 0 1 m_uviaMinDrillUnits 1 protected 1 Resizable 1 wxALIGN_LEFT 0 -1 10 wxEXPAND|wxTOP 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_staticline111 1 protected 1 Resizable 1 wxLI_HORIZONTAL ; ; forward_declare 0 10 wxEXPAND|wxTOP 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_staticline12 1 protected 1 Resizable 1 wxLI_HORIZONTAL ; ; forward_declare 0 10 wxEXPAND|wxTOP 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_staticline13 1 protected 1 Resizable 1 wxLI_HORIZONTAL ; ; forward_declare 0 10 wxEXPAND|wxTOP 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_staticline14 1 protected 1 Resizable 1 wxLI_HORIZONTAL ; ; forward_declare 0 4 wxALIGN_CENTER_HORIZONTAL|wxALL 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Silkscreen 0 0 0 1 m_staticText28 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxEXPAND 1 0 protected 0 5 wxEXPAND 1 0 protected 0 5 wxEXPAND 1 0 protected 0 5 wxEXPAND 1 0 protected 0 5 wxALIGN_CENTER_VERTICAL|wxRIGHT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Minimum item clearance: 0 0 0 1 m_silkClearanceLabel 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxALIGN_CENTER_VERTICAL|wxEXPAND|wxTOP|wxBOTTOM 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_silkClearanceCtrl 1 protected 1 Resizable 1 ; ; forward_declare 0 Minimum clearance between two items on the same silkscreen layer. If set this can improve legibility. (Note: does not apply to multiple shapes within a single footprint.) wxFILTER_NONE wxDefaultValidator 5 wxALIGN_CENTER_VERTICAL|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY mm 0 0 0 1 m_silkClearanceUnits 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxEXPAND 1 0 protected 0 5 wxALIGN_CENTER_VERTICAL|wxRIGHT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Minimum text height: 0 0 0 1 m_textHeightLabel 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxEXPAND|wxTOP|wxBOTTOM|wxALIGN_CENTER_VERTICAL 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_textHeightCtrl 1 protected 1 Resizable 1 ; ; forward_declare 0 wxFILTER_NONE wxDefaultValidator 5 wxALIGN_CENTER_VERTICAL|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY mm 0 0 0 1 m_textHeightUnits 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxEXPAND 1 0 protected 0 5 wxALIGN_CENTER_VERTICAL|wxRIGHT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Minimum text thickness: 0 0 0 1 m_textThicknessLabel 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxTOP|wxBOTTOM|wxEXPAND|wxALIGN_CENTER_VERTICAL 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_textThicknessCtrl 1 protected 1 Resizable 1 ; ; forward_declare 0 wxFILTER_NONE wxDefaultValidator 5 wxALIGN_CENTER_VERTICAL|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY mm 0 0 0 1 m_textThicknessUnits 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 20 wxEXPAND|wxRIGHT|wxLEFT 0 0 protected 0 5 wxEXPAND|wxRIGHT 0 sbFeatureRules wxVERTICAL none 5 wxEXPAND|wxTOP 0 bSizerArcToPoly wxVERTICAL none 5 wxTOP|wxRIGHT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Arc/circle approximated by segments 0 0 0 1 m_stCircleToPolyOpt 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxEXPAND|wxBOTTOM 0 4 wxBOTH 2 0 fgSizer2 wxFLEX_GROWMODE_SPECIFIED none 0 3 5 0 0 protected 15 5 wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Max allowed deviation: 0 0 0 1 m_maxErrorTitle 1 protected 1 Resizable 1 ; ; forward_declare 0 This is the maximum distance between a circle and the polygonal shape that approximate it. The error max defines the number of segments of this polygon. -1 5 wxALIGN_CENTER_VERTICAL|wxALL|wxEXPAND|wxLEFT|wxRIGHT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_maxErrorCtrl 1 protected 1 Resizable 1 ; ; forward_declare 0 The maximum allowed deviation between a true arc or circle and segments used to approximate it. Smaller values produce smoother graphics at the expense of performance. wxString wxFILTER_NUMERIC wxTextValidator 5 wxALIGN_CENTER_VERTICAL|wxRIGHT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY mm 0 0 0 1 m_maxErrorUnits 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxLEFT|wxRIGHT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Note: zone filling can be slow when < %s. 0 0 0 1 m_stCircleToPolyWarning 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 10 wxEXPAND|wxTOP 0 m_bSizerPolygonFillOption wxVERTICAL protected 12 wxEXPAND|wxTOP|wxBOTTOM 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_staticline1 1 protected 1 Resizable 1 wxLI_HORIZONTAL ; ; forward_declare 0 5 wxTOP|wxRIGHT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Zone fill strategy 0 0 0 1 m_stZoneFilledPolysOpt 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 7 wxEXPAND|wxTOP 0 bSizer9 wxHORIZONTAL none 5 wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_filletBitmap 1 protected 1 Resizable 1 ; ; forward_declare 0 5 wxALL|wxALIGN_CENTER_VERTICAL 0 1 1 1 1 1 0 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Allow fillets outside zone outline 0 0 1 m_allowExternalFilletsOpt 1 protected 1 Resizable 1 ; ; forward_declare 0 wxFILTER_NONE wxDefaultValidator 5 wxEXPAND|wxTOP 1 bSizer111 wxHORIZONTAL none 5 wxRIGHT|wxLEFT|wxALIGN_CENTER_VERTICAL 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_spokeBitmap 1 protected 1 Resizable 1 ; ; forward_declare 0 5 wxALIGN_CENTER_VERTICAL|wxLEFT 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Min thermal relief spoke count: 0 0 0 1 m_minResolvedSpokesLabel 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxALL|wxALIGN_CENTER_VERTICAL 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 10 0 0 0 1 m_minResolvedSpokeCountCtrl 1 protected 1 Resizable 1 -1,-1 wxSP_ARROW_KEYS ; ; forward_declare 0 5 wxEXPAND 1 bSizer11 wxVERTICAL none 12 wxEXPAND|wxTOP|wxBOTTOM 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY 0 0 1 m_staticline15 1 protected 1 Resizable 1 wxLI_HORIZONTAL ; ; forward_declare 0 5 wxALL 0 1 1 1 1 1 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Length tuning 0 0 0 1 m_staticText33 1 protected 1 Resizable 1 ; ; forward_declare 0 -1 5 wxALL 0 1 1 1 1 1 0 0 1 1 0 Dock 0 Left 1 1 0 0 wxID_ANY Include stackup height in track length calculations 0 0 1 m_useHeightForLengthCalcs 1 protected 1 Resizable 1 ; ; forward_declare 0 When enabled, the distance between copper layers will be included in track length calculations for tracks with vias. When disabled, via stackup height is ignored. wxFILTER_NONE wxDefaultValidator 0 wxEXPAND 1 0 protected 0