/* * This program source code file is part of KiCad, a free EDA CAD application. * * Copyright (C) 1992-2012 KiCad Developers, see AUTHORS.txt for contributors. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, you may find one here: * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html * or you may search the http://www.gnu.org website for the version 2 license, * or you may write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA */ /** * @file pcbnew/pcbplot.h * @brief Board plot function definition file. */ #ifndef PCBPLOT_H_ #define PCBPLOT_H_ #include #include #include #include class PLOTTER; class TEXTE_PCB; class DRAWSEGMENT; class DIMENSION; class MODULE; class EDGE_MODULE; class PCB_TARGET; class TEXTE_MODULE; class ZONE_CONTAINER; class BOARD; class REPORTER; // Shared Config keys for plot and print #define OPTKEY_LAYERBASE wxT( "PlotLayer_%d" ) #define OPTKEY_PRINT_X_FINESCALE_ADJ wxT( "PrintXFineScaleAdj" ) #define OPTKEY_PRINT_Y_FINESCALE_ADJ wxT( "PrintYFineScaleAdj" ) #define OPTKEY_PRINT_SCALE wxT( "PrintScale" ) #define OPTKEY_PRINT_MODULE_SCALE wxT( "PrintModuleScale" ) #define OPTKEY_PRINT_PAGE_FRAME wxT( "PrintPageFrame" ) #define OPTKEY_PRINT_MONOCHROME_MODE wxT( "PrintMonochrome" ) #define OPTKEY_PRINT_PAGE_PER_LAYER wxT( "PrintSinglePage" ) #define OPTKEY_PRINT_PADS_DRILL wxT( "PrintPadsDrillOpt" ) #define OPTKEY_PLOT_X_FINESCALE_ADJ wxT( "PlotXFineScaleAdj" ) #define OPTKEY_PLOT_Y_FINESCALE_ADJ wxT( "PlotYFineScaleAdj" ) #define CONFIG_PS_FINEWIDTH_ADJ wxT( "PSPlotFineWidthAdj" ) // Define min and max reasonable values for plot/print scale #define PLOT_MIN_SCALE 0.01 #define PLOT_MAX_SCALE 100.0 // Small drill marks (small pad holes) diameter value #define SMALL_DRILL KiROUND( 0.35 * IU_PER_MM ) // A helper class to plot board items class BRDITEMS_PLOTTER : public PCB_PLOT_PARAMS { PLOTTER* m_plotter; BOARD* m_board; LSET m_layerMask; public: BRDITEMS_PLOTTER( PLOTTER* aPlotter, BOARD* aBoard, const PCB_PLOT_PARAMS& aPlotOpts ) : PCB_PLOT_PARAMS( aPlotOpts ) { m_plotter = aPlotter; m_board = aBoard; } /** * @return a 'width adjustment' for the postscript engine * (useful for controlling toner bleeding during direct transfer) * added to track width and via/pads size */ int getFineWidthAdj() { if( GetFormat() == PLOT_FORMAT_POST ) return GetWidthAdjust(); else return 0; } // Basic functions to plot a board item void SetLayerSet( LSET aLayerMask ) { m_layerMask = aLayerMask; } void Plot_Edges_Modules(); void Plot_1_EdgeModule( EDGE_MODULE* aEdge ); void PlotTextModule( TEXTE_MODULE* aTextMod, EDA_COLOR_T aColor ); /* * Plot field of a module (footprint) * Reference, Value, and other fields are plotted only if * the corresponding option is enabled * Invisible text fields are plotted only if PlotInvisibleText option is set * usually they are not plotted. */ bool PlotAllTextsModule( MODULE* aModule ); void PlotDimension( DIMENSION* Dimension ); void PlotPcbTarget( PCB_TARGET* PtMire ); void PlotFilledAreas( ZONE_CONTAINER* aZone ); void PlotTextePcb( TEXTE_PCB* pt_texte ); void PlotDrawSegment( DRAWSEGMENT* PtSegm ); /** * Plot a pad. * unlike other items, a pad had not a specific color, * and be drawn as a non filled item although the plot mode is filled * color and plot mode are needed by this function */ void PlotPad( D_PAD* aPad, EDA_COLOR_T aColor, EDA_DRAW_MODE_T aPlotMode ); /** * plot items like text and graphics, * but not tracks and modules */ void PlotBoardGraphicItems(); /** Function PlotDrillMarks * Draw a drill mark for pads and vias. * Must be called after all drawings, because it * redraw the drill mark on a pad or via, as a negative (i.e. white) shape in * FILLED plot mode (for PS and PDF outputs) */ void PlotDrillMarks(); /** * Function getColor * @return the layer color * @param aLayer = the layer id * White color is special: cannot be seen on a white paper * and in B&W mode, is plotted as white but other colors are plotted in BLACK * so the returned color is LIGHTGRAY when the layer color is WHITE */ EDA_COLOR_T getColor( LAYER_NUM aLayer ); private: /** Helper function to plot a single drill mark. It compensate and clamp * the drill mark size depending on the current plot options */ void plotOneDrillMark( PAD_DRILL_SHAPE_T aDrillShape, const wxPoint& aDrillPos, wxSize aDrillSize, const wxSize& aPadSize, double aOrientation, int aSmallDrill ); }; PLOTTER* StartPlotBoard( BOARD* aBoard, PCB_PLOT_PARAMS* aPlotOpts, int aLayer, const wxString& aFullFileName, const wxString& aSheetDesc ); /** * Function PlotOneBoardLayer * main function to plot one copper or technical layer. * It prepare options and calls the specialized plot function, * according to the layer type * @param aBoard = the board to plot * @param aPlotter = the plotter to use * @param aLayer = the layer id to plot * @param aPlotOpt = the plot options (files, sketch). Has meaning for some formats only */ void PlotOneBoardLayer( BOARD *aBoard, PLOTTER* aPlotter, LAYER_ID aLayer, const PCB_PLOT_PARAMS& aPlotOpt ); /** * Function PlotStandardLayer * plot copper or technical layers. * not used for silk screen layers, because these layers have specific * requirements, mainly for pads * @param aBoard = the board to plot * @param aPlotter = the plotter to use * @param aLayerMask = the mask to define the layers to plot * @param aPlotOpt = the plot options (files, sketch). Has meaning for some formats only * * aPlotOpt has 3 important options to control this plot, * which are set, depending on the layer type to plot * SetEnablePlotVia( bool aEnable ) * aEnable = true to plot vias, false to skip vias (has meaning * only for solder mask layers). * SetSkipPlotNPTH_Pads( bool aSkip ) * aSkip = true to skip NPTH Pads, when the pad size and the pad hole * have the same size. Used in GERBER format only. * SetDrillMarksType( DrillMarksType aVal ) controle the actual hole: * no hole, small hole, actual hole */ void PlotStandardLayer( BOARD* aBoard, PLOTTER* aPlotter, LSET aLayerMask, const PCB_PLOT_PARAMS& aPlotOpt ); /** * Function PlotLayerOutlines * plot copper outline of a copper layer. * @param aBoard = the board to plot * @param aPlotter = the plotter to use * @param aLayerMask = the mask to define the layers to plot * @param aPlotOpt = the plot options. Has meaning for some formats only */ void PlotLayerOutlines( BOARD *aBoard, PLOTTER* aPlotter, LSET aLayerMask, const PCB_PLOT_PARAMS& aPlotOpt ); /** * Function PlotSilkScreen * plot silkscreen layers which have specific requirements, mainly for pads. * Should not be used for other layers * @param aBoard = the board to plot * @param aPlotter = the plotter to use * @param aLayerMask = the mask to define the layers to plot (silkscreen Front and/or Back) * @param aPlotOpt = the plot options (files, sketch). Has meaning for some formats only */ void PlotSilkScreen( BOARD* aBoard, PLOTTER* aPlotter, LSET aLayerMask, const PCB_PLOT_PARAMS& aPlotOpt ); /** * Function EnsureOutputDirectory (helper function) * make \a OutputDir absolute and creates the path if it doesn't exist. * @param aOutputDir the wxFileName containing the full path and file name to modify. The path * may be absolute or relative to \a aBoardFilename . * @param aBoardFilename the board full path and filename. * @param aReporter a point to a REPORTER object use to show messages (can be NULL) * @return true if \a aOutputDir already exists or was successfully created. */ bool EnsureOutputDirectory( wxFileName* aOutputDir, const wxString& aBoardFilename, REPORTER* aReporter = NULL ); /** * Function BuildPlotFileName (helper function) * Complete a plot filename: forces the output directory, * add a suffix to the name and sets the specified extension * the suffix is usually the layer name * replaces not allowed chars in suffix by '_' * @param aFilename = the wxFileName to initialize * Contains the base filename * @param aOutputDir = the path * @param aSuffix = the suffix to add to the base filename * @param aExtension = the file extension */ void BuildPlotFileName( wxFileName* aFilename, const wxString& aOutputDir, const wxString& aSuffix, const wxString& aExtension ); /** * Function GetGerberExtension * @return the appropriate Gerber file extension for \a aLayer */ const wxString GetGerberExtension( LAYER_NUM aLayer ); /** * Function GetGerberFileFunction * Returns the "file function" attribute for \a aLayer, as defined in the * Gerber file format specification J1 (chapter 5). The returned string excludes * the "%TF.FileFunction" attribute prefix and the "*%" suffix. * @param aBoard = the board, needed to get the total count of copper layers * @param aLayer = the layer number to create the attribute for * @return The attribute, as a text string */ extern wxString GetGerberFileFunction( const BOARD *aBoard, LAYER_NUM aLayer ); // PLOTGERB.CPP void SelectD_CODE_For_LineDraw( PLOTTER* plotter, int aSize ); #endif // PCBPLOT_H_