/**************************************************/ /* onrightclick.cpp: Right mouse button functions */ /**************************************************/ #include "fctsys.h" #include "gr_basic.h" #include "macros.h" #include "common.h" #include "class_drawpanel.h" #include "confirm.h" #include "pcbnew.h" #include "wxPcbStruct.h" #include "class_board_design_settings.h" #include "pcbnew_id.h" #include "hotkeys.h" #include "collectors.h" /* Bitmaps */ #include "bitmaps.h" static wxMenu* Append_Track_Width_List( BOARD* aBoard ); /******************************************************************************/ bool WinEDA_PcbFrame::OnRightClick( const wxPoint& aMousePos, wxMenu* aPopMenu ) /******************************************************************************/ { wxString msg; int flags = 0; bool locate_track = FALSE; bool BlockActive = (GetScreen()->m_BlockLocate.m_Command != BLOCK_IDLE); wxClientDC dc( DrawPanel ); BOARD_ITEM* item = GetCurItem(); DrawPanel->m_CanStartBlock = -1; // Avoid to start a block coomand when clicking on menu // If a command or a block is in progress: // Put the Cancel command (if needed) and the End command if( BlockActive ) { createPopUpBlockMenu( aPopMenu ); aPopMenu->AppendSeparator(); return true; } DrawPanel->CursorOff( &dc ); if( m_ID_current_state ) { if( item && item->m_Flags ) { ADD_MENUITEM( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND, _( "Cancel" ), cancel_xpm ); } else { ADD_MENUITEM( aPopMenu, ID_POPUP_CLOSE_CURRENT_TOOL, _( "End Tool" ), cancel_tool_xpm ); } aPopMenu->AppendSeparator(); } else { if( item && item->m_Flags ) { ADD_MENUITEM( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND, _( "Cancel" ), cancel_xpm ); aPopMenu->AppendSeparator(); } } /* Select a proper item */ wxPoint cursorPos = GetScreen()->m_Curseur; wxPoint selectPos = m_Collector->GetRefPos(); PutOnGrid( &selectPos ); /* We can reselect another item only if there are no item being edited * because ALL moving functions use GetCurItem(), therefore GetCurItem() * must return the same item during moving. We know an item is moving * if( item && (item->m_Flags != 0)) is true and after calling * PcbGeneralLocateAndDisplay(), GetCurItem() is any arbitrary BOARD_ITEM, * not the current item being edited. In such case we cannot call * PcbGeneralLocateAndDisplay(). */ if( !item || (item->m_Flags == 0) ) { // show "item selector" menu only if no item now or selected item was not // previously picked at this position if( !item || cursorPos != selectPos ) { DrawPanel->m_AbortRequest = false; item = PcbGeneralLocateAndDisplay(); if( DrawPanel->m_AbortRequest ) { DrawPanel->CursorOn( &dc ); return false; } } } item = GetCurItem(); if( item ) flags = item->m_Flags; else flags = 0; if( item ) { switch( item->Type() ) { case TYPE_MODULE: createPopUpMenuForFootprints( (MODULE*) item, aPopMenu ); if( m_HTOOL_current_state == ID_TOOLBARH_PCB_MODE_MODULE ) { aPopMenu->AppendSeparator(); if( !( (MODULE*) item )->IsLocked() ) { msg = AddHotkeyName( _( "Lock Module" ), g_Board_Editor_Hokeys_Descr, HK_LOCK_UNLOCK_FOOTPRINT ); ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FIXE_MODULE, msg, locked_xpm ); } else { msg = AddHotkeyName( _( "Unlock Module" ), g_Board_Editor_Hokeys_Descr, HK_LOCK_UNLOCK_FOOTPRINT ); ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FREE_MODULE, msg, unlocked_xpm ); } if( !flags ) aPopMenu->Append( ID_POPUP_PCB_AUTOPLACE_CURRENT_MODULE, _( "Auto Place Module" ) ); } if( m_HTOOL_current_state == ID_TOOLBARH_PCB_MODE_TRACKS ) { if( !flags ) aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_MODULE, _( "Autoroute Module" ) ); } break; case TYPE_PAD: createPopUpMenuForFpPads( (D_PAD*) item, aPopMenu ); break; case TYPE_TEXTE_MODULE: createPopUpMenuForFpTexts( (TEXTE_MODULE*) item, aPopMenu ); break; case TYPE_DRAWSEGMENT: // Some graphic items on technical layers if( (flags & IS_NEW) ) { ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_DRAWING, _( "End Drawing" ), apply_xpm ); } if( !flags ) { msg = AddHotkeyName( _( "Move Drawing" ), g_Board_Editor_Hokeys_Descr, HK_MOVE_ITEM ); ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_MOVE_DRAWING_REQUEST, msg, move_xpm ); ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_EDIT_DRAWING, _( "Edit Drawing" ), edit_xpm ); ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING, _( "Delete Drawing" ), delete_xpm ); if( item->GetLayer() > LAST_COPPER_LAYER ) ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING_LAYER, _( "Delete All Drawing on Layer" ), delete_body_xpm ); } break; case TYPE_ZONE: // Item used to fill a zone ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_DELETE_ZONE, _( "Delete Zone Filling" ), delete_xpm ); break; case TYPE_ZONE_CONTAINER: // Item used to handle a zone area (outlines, holes ...) if( flags & IS_NEW ) { ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE, _( "Close Zone Outline" ), apply_xpm ); ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER, _( "Delete Last Corner" ), delete_xpm ); } else createPopUpMenuForZones( (ZONE_CONTAINER*) item, aPopMenu ); break; case TYPE_TEXTE: createPopUpMenuForTexts( (TEXTE_PCB*) item, aPopMenu ); break; case TYPE_TRACK: case TYPE_VIA: locate_track = true; createPopupMenuForTracks( (TRACK*) item, aPopMenu ); break; case TYPE_MARKER_PCB: createPopUpMenuForMarkers( (MARKER_PCB*) item, aPopMenu ); break; case TYPE_DIMENSION: if( !flags ) { msg = AddHotkeyName( _( "Edit Dimension" ), g_Board_Editor_Hokeys_Descr, HK_EDIT_ITEM ); ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_EDIT_DIMENSION, msg, edit_xpm ); ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_DELETE_DIMENSION, _( "Delete Dimension" ), delete_xpm ); } break; case TYPE_MIRE: if( !flags ) { msg = AddHotkeyName( _( "Move Target" ), g_Board_Editor_Hokeys_Descr, HK_MOVE_ITEM ); ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_MOVE_MIRE_REQUEST, msg, move_xpm ); msg = AddHotkeyName( _( "Edit Target" ), g_Board_Editor_Hokeys_Descr, HK_EDIT_ITEM ); ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_EDIT_MIRE, msg, edit_xpm ); ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_DELETE_MIRE, _( "Delete Target" ), delete_xpm ); } break; case TYPE_EDGE_MODULE: case TYPE_SCREEN: case TYPE_NOT_INIT: case TYPE_PCB: msg.Printf( wxT( "WinEDA_PcbFrame::OnRightClick() Error: unexpected DrawType %d" ), item->Type() ); DisplayError( this, msg ); SetCurItem( NULL ); break; default: msg.Printf( wxT( "WinEDA_PcbFrame::OnRightClick() Error: unknown DrawType %d" ), item->Type() ); DisplayError( this, msg ); // Attempt to clear error (but should no occurs ) if( item->Type() >= MAX_STRUCT_TYPE_ID ) SetCurItem( NULL ); break; } aPopMenu->AppendSeparator(); } if( !flags ) { msg = AddHotkeyName( _( "Get and Move Footprint" ), g_Board_Editor_Hokeys_Descr, HK_GET_AND_MOVE_FOOTPRINT ); ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST, msg, move_module_xpm ); } /* Display context sensitive comands: */ switch( m_ID_current_state ) { case ID_PCB_ZONES_BUTT: if( GetBoard()->m_ZoneDescriptorList.size() > 0 ) { aPopMenu->AppendSeparator(); ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_FILL_ALL_ZONES, _( "Fill or Refill All Zones" ), fill_zone_xpm ); ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES, _( "Remove Filled Areas in All Zones" ), fill_zone_xpm ); aPopMenu->AppendSeparator(); } ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_SELECT_LAYER, _( "Select Working Layer" ), select_w_layer_xpm ); aPopMenu->AppendSeparator(); break; case ID_TRACK_BUTT: if ( ! locate_track ) // This menu is already added when a track is located ADD_MENUITEM_WITH_SUBMENU( aPopMenu, Append_Track_Width_List( GetBoard() ), ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ), width_track_xpm ); ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_SELECT_CU_LAYER, _( "Select Working Layer" ), select_w_layer_xpm ); ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_SELECT_LAYER_PAIR, _( "Select Layer Pair for Vias" ), select_layer_pair_xpm ); aPopMenu->AppendSeparator(); break; case ID_PCB_CIRCLE_BUTT: case ID_PCB_ARC_BUTT: case ID_PCB_ADD_TEXT_BUTT: case ID_PCB_ADD_LINE_BUTT: case ID_PCB_DIMENSION_BUTT: ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_SELECT_NO_CU_LAYER, _( "Select Working Layer" ), select_w_layer_xpm ); aPopMenu->AppendSeparator(); break; case ID_COMPONENT_BUTT: ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC, _( "Footprint Documentation" ), book_xpm ); aPopMenu->AppendSeparator(); break; case 0: if( m_HTOOL_current_state == ID_TOOLBARH_PCB_MODE_MODULE ) { wxMenu* commands = new wxMenu; ADD_MENUITEM_WITH_SUBMENU( aPopMenu, commands, ID_POPUP_PCB_AUTOPLACE_COMMANDS, _( "Glob Move and Place" ), move_xpm ); ADD_MENUITEM( commands, ID_POPUP_PCB_AUTOPLACE_FREE_ALL_MODULES, _( "Unlock All Modules" ), unlocked_xpm ); ADD_MENUITEM( commands, ID_POPUP_PCB_AUTOPLACE_FIXE_ALL_MODULES, _( "Lock All Modules" ), locked_xpm ); commands->AppendSeparator(); ADD_MENUITEM( commands, ID_POPUP_PCB_AUTOMOVE_ALL_MODULES, _( "Move All Modules" ), move_xpm ); commands->Append( ID_POPUP_PCB_AUTOMOVE_NEW_MODULES, _( "Move New Modules" ) ); commands->AppendSeparator(); commands->Append( ID_POPUP_PCB_AUTOPLACE_ALL_MODULES, _( "Autoplace All Modules" ) ); commands->Append( ID_POPUP_PCB_AUTOPLACE_NEW_MODULES, _( "Autoplace New Modules" ) ); commands->Append( ID_POPUP_PCB_AUTOPLACE_NEXT_MODULE, _( "Autoplace Next Module" ) ); commands->AppendSeparator(); ADD_MENUITEM( commands, ID_POPUP_PCB_REORIENT_ALL_MODULES, _( "Orient All Modules" ), rotate_module_pos_xpm ); aPopMenu->AppendSeparator(); } if( m_HTOOL_current_state == ID_TOOLBARH_PCB_MODE_TRACKS ) { wxMenu* commands = new wxMenu; aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_COMMANDS, _( "Autoroute" ), commands ); ADD_MENUITEM( commands, ID_POPUP_PCB_SELECT_LAYER_PAIR, _( "Select Layer Pair" ), select_layer_pair_xpm ); commands->AppendSeparator(); commands->Append( ID_POPUP_PCB_AUTOROUTE_ALL_MODULES, _( "Autoroute All Modules" ) ); commands->AppendSeparator(); commands->Append( ID_POPUP_PCB_AUTOROUTE_RESET_UNROUTED, _( "Reset Unrouted" ) ); aPopMenu->AppendSeparator(); } if( locate_track ) ADD_MENUITEM_WITH_SUBMENU( aPopMenu, Append_Track_Width_List( GetBoard() ), ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ), width_track_xpm ); ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_SELECT_LAYER, _( "Select Working Layer" ), select_w_layer_xpm ); aPopMenu->AppendSeparator(); break; } DrawPanel->CursorOn( &dc ); return true; } /*********************************************************/ void WinEDA_PcbFrame::createPopUpBlockMenu( wxMenu* menu ) /*********************************************************/ /* Create Pop sub menu for block commands */ { ADD_MENUITEM( menu, ID_POPUP_CANCEL_CURRENT_COMMAND, _( "Cancel Block" ), cancel_xpm ); ADD_MENUITEM( menu, ID_POPUP_ZOOM_BLOCK, _( "Zoom Block" ), zoom_selected_xpm ); menu->AppendSeparator(); ADD_MENUITEM( menu, ID_POPUP_PLACE_BLOCK, _( "Place Block" ), apply_xpm ); ADD_MENUITEM( menu, ID_POPUP_COPY_BLOCK, _( "Copy Block" ), copyblock_xpm ); ADD_MENUITEM( menu, ID_POPUP_FLIP_BLOCK, _( "Flip Block" ), invert_module_xpm ); ADD_MENUITEM( menu, ID_POPUP_ROTATE_BLOCK, _( "Rotate Block" ), rotate_pos_xpm ); ADD_MENUITEM( menu, ID_POPUP_DELETE_BLOCK, _( "Delete Block" ), delete_xpm ); } /******************************************************************************/ void WinEDA_PcbFrame::createPopupMenuForTracks( TRACK* Track, wxMenu* PopMenu ) /******************************************************************************/ /* Create command lines for a popup menu, for track and via editing * also update Netclass selection */ { wxPoint cursorPosition = GetScreen()->m_Curseur; wxString msg; GetBoard()->SetCurrentNetClass( Track->GetNetClassName() ); m_TrackAndViasSizesList_Changed = true; AuxiliaryToolBar_Update_UI(); int flags = Track->m_Flags; if( flags == 0 ) { if( Track->Type() == TYPE_VIA ) { ADD_MENUITEM( PopMenu, ID_POPUP_PCB_MOVE_TRACK_NODE, _( "Drag Via" ), move_xpm ); } else { if( Track->IsPointOnEnds( cursorPosition, -1 ) != 0 ) { msg = AddHotkeyName( _( "Move Node" ), g_Board_Editor_Hokeys_Descr, HK_MOVE_ITEM ); ADD_MENUITEM( PopMenu, ID_POPUP_PCB_MOVE_TRACK_NODE, msg, move_xpm ); } else { ADD_MENUITEM( PopMenu, ID_POPUP_PCB_DRAG_TRACK_SEGMENT_KEEP_SLOPE, _( "Drag Segments, Keep Slope" ), drag_segment_withslope_xpm ); msg = AddHotkeyName( _( "Drag Segment" ), g_Board_Editor_Hokeys_Descr, HK_DRAG_ITEM ); ADD_MENUITEM( PopMenu, ID_POPUP_PCB_DRAG_TRACK_SEGMENT, msg, drag_track_segment_xpm ); ADD_MENUITEM( PopMenu, ID_POPUP_PCB_BREAK_TRACK, _( "Break Track" ), break_line_xpm ); } } } else if( flags & IS_DRAGGED ) // Drag via or node in progress { ADD_MENUITEM( PopMenu, ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE, _( "Place Node" ), apply_xpm ); return; } else // Edition in progress { if( flags & IS_NEW ) { msg = AddHotkeyName( _( "End Track" ), g_Board_Editor_Hokeys_Descr, HK_END_TRACK ); ADD_MENUITEM( PopMenu, ID_POPUP_PCB_END_TRACK, msg, apply_xpm ); } msg = AddHotkeyName( _( "Place Via" ), g_Board_Editor_Hokeys_Descr, HK_ADD_VIA ); PopMenu->Append( ID_POPUP_PCB_PLACE_VIA, msg ); msg = AddHotkeyName( _( "Switch Track Posture" ), g_Board_Editor_Hokeys_Descr, HK_SWITCH_TRACK_POSTURE ); PopMenu->Append( ID_POPUP_PCB_SWITCH_TRACK_POSTURE, msg ); // See if we can place a Micro Via (4 or more layers, and start from an external layer): if( IsMicroViaAcceptable() ) { msg = AddHotkeyName( _( "Place Micro Via" ), g_Board_Editor_Hokeys_Descr, HK_ADD_MICROVIA ); PopMenu->Append( ID_POPUP_PCB_PLACE_MICROVIA, msg ); } } // track Width control : if( !flags ) { if( Track->Type() == TYPE_VIA ) { msg = AddHotkeyName( _( "Change Via Size and Drill" ), g_Board_Editor_Hokeys_Descr, HK_EDIT_ITEM ); ADD_MENUITEM( PopMenu, ID_POPUP_PCB_EDIT_TRACKSEG, msg, width_segment_xpm ); } else { msg = AddHotkeyName( _( "Change Segment Width" ), g_Board_Editor_Hokeys_Descr, HK_EDIT_ITEM ); ADD_MENUITEM( PopMenu, ID_POPUP_PCB_EDIT_TRACKSEG, msg, width_segment_xpm ); ADD_MENUITEM( PopMenu, ID_POPUP_PCB_EDIT_TRACK, _( "Change Track Width" ), width_track_xpm ); } } // Allows switching to an other track/via size when routing ADD_MENUITEM_WITH_SUBMENU( PopMenu, Append_Track_Width_List( GetBoard() ), ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ), width_track_xpm ); // Delete control: PopMenu->AppendSeparator(); wxMenu* track_mnu = new wxMenu; ADD_MENUITEM_WITH_SUBMENU( PopMenu, track_mnu, ID_POPUP_PCB_DELETE_TRACK_MNU, _( "Delete" ), delete_xpm ); msg = AddHotkeyName( Track->Type()==TYPE_VIA ? _( "Delete Via" ) : _( "Delete Segment" ), g_Board_Editor_Hokeys_Descr, HK_BACK_SPACE ); ADD_MENUITEM( track_mnu, ID_POPUP_PCB_DELETE_TRACKSEG, msg, delete_line_xpm ); if( !flags ) { msg = AddHotkeyName( _( "Delete Track" ), g_Board_Editor_Hokeys_Descr, HK_DELETE ); ADD_MENUITEM( track_mnu, ID_POPUP_PCB_DELETE_TRACK, msg, delete_track_xpm ); ADD_MENUITEM( track_mnu, ID_POPUP_PCB_DELETE_TRACKNET, _( "Delete Net" ), delete_net_xpm ); } // Add global edition command if( !flags ) { PopMenu->AppendSeparator(); ADD_MENUITEM( PopMenu, ID_POPUP_PCB_EDIT_ALL_VIAS_AND_TRACK_SIZE, _( "Global Tracks and Vias Edition" ), width_track_via_xpm ); } // Add lock/unlock flags menu: track_mnu = new wxMenu; ADD_MENUITEM_WITH_SUBMENU( PopMenu, track_mnu, ID_POPUP_PCB_SETFLAGS_TRACK_MNU, _( "Set Flags" ), flag_xpm ); track_mnu->Append( ID_POPUP_PCB_LOCK_ON_TRACKSEG, _( "Locked: Yes" ), wxEmptyString, true ); track_mnu->Append( ID_POPUP_PCB_LOCK_OFF_TRACKSEG, _( "Locked: No" ), wxEmptyString, true ); if( Track->GetState( SEGM_FIXE ) ) track_mnu->Check( ID_POPUP_PCB_LOCK_ON_TRACKSEG, true ); else track_mnu->Check( ID_POPUP_PCB_LOCK_OFF_TRACKSEG, true ); if( !flags ) { track_mnu->Append( ID_POPUP_PCB_LOCK_ON_TRACK, _( "Track Locked: Yes" ) ); track_mnu->Append( ID_POPUP_PCB_LOCK_OFF_TRACK, _( "Track Locked: No" ) ); track_mnu->AppendSeparator(); track_mnu->Append( ID_POPUP_PCB_LOCK_ON_NET, _( "Net Locked: Yes" ) ); track_mnu->Append( ID_POPUP_PCB_LOCK_OFF_NET, _( "Net Locked: No" ) ); } } /********************************************************************************************/ void WinEDA_PcbFrame::createPopUpMenuForZones( ZONE_CONTAINER* edge_zone, wxMenu* aPopMenu ) /********************************************************************************************/ /* Create the wxMenuitem list for zone outlines editing and zone filling */ { wxString msg; if( edge_zone->m_Flags == IS_DRAGGED ) { ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_PLACE_DRAGGED_ZONE_OUTLINE_SEGMENT, _( "Place Edge Outline" ), apply_xpm ); } else if( edge_zone->m_Flags ) { if( (edge_zone->m_Flags & IN_EDIT ) ) ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_PLACE_ZONE_CORNER, _( "Place Corner" ), apply_xpm ); else ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_PLACE_ZONE_OUTLINES, _( "Place Zone" ), apply_xpm ); } else { wxMenu* zones_menu = new wxMenu(); ADD_MENUITEM_WITH_SUBMENU( aPopMenu, zones_menu, -1, _( "Zones" ), add_zone_xpm ); int index; if( ( index = edge_zone->HitTestForCorner( GetScreen()->RefPos( true ) ) ) >= 0 ) { ADD_MENUITEM( zones_menu, ID_POPUP_PCB_MOVE_ZONE_CORNER, _( "Move Corner" ), move_xpm ); ADD_MENUITEM( zones_menu, ID_POPUP_PCB_DELETE_ZONE_CORNER, _( "Delete Corner" ), delete_xpm ); } else if( ( index = edge_zone->HitTestForEdge( GetScreen()->RefPos( true ) ) ) >= 0 ) { ADD_MENUITEM( zones_menu, ID_POPUP_PCB_ADD_ZONE_CORNER, _( "Create Corner" ), add_corner_xpm ); msg = AddHotkeyName( _( "Drag Outline Segment" ), g_Board_Editor_Hokeys_Descr, HK_DRAG_ITEM ); ADD_MENUITEM( zones_menu, ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT, msg, drag_outline_segment_xpm ); } zones_menu->AppendSeparator(); ADD_MENUITEM( zones_menu, ID_POPUP_PCB_ZONE_ADD_SIMILAR_ZONE, _( "Add Similar Zone" ), add_zone_xpm ); ADD_MENUITEM( zones_menu, ID_POPUP_PCB_ZONE_ADD_CUTOUT_ZONE, _( "Add Cutout Area" ), add_zone_cutout ); zones_menu->AppendSeparator(); ADD_MENUITEM( zones_menu, ID_POPUP_PCB_FILL_ZONE, _( "Fill Zone" ), fill_zone_xpm ); if( edge_zone->m_FilledPolysList.size() > 0 ) { ADD_MENUITEM( zones_menu, ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_CURRENT_ZONE, _( "Remove Filled Areas in Zone" ), fill_zone_xpm ); } msg = AddHotkeyName( _( "Move Zone" ), g_Board_Editor_Hokeys_Descr, HK_MOVE_ITEM ); ADD_MENUITEM( zones_menu, ID_POPUP_PCB_MOVE_ZONE_OUTLINES, msg, move_xpm ); msg = AddHotkeyName( _( "Edit Zone Params" ), g_Board_Editor_Hokeys_Descr, HK_EDIT_ITEM ); ADD_MENUITEM( zones_menu, ID_POPUP_PCB_EDIT_ZONE_PARAMS, msg, edit_xpm ); zones_menu->AppendSeparator(); if( index >= 0 && edge_zone->m_Poly->IsCutoutContour( edge_zone->m_CornerSelection ) ) ADD_MENUITEM( zones_menu, ID_POPUP_PCB_DELETE_ZONE_CUTOUT, _( "Delete Cutout" ), delete_xpm ); ADD_MENUITEM( zones_menu, ID_POPUP_PCB_DELETE_ZONE_CONTAINER, _( "Delete Zone Outline" ), delete_xpm ); } } /*********************************************************************************/ void WinEDA_PcbFrame::createPopUpMenuForFootprints( MODULE* aModule, wxMenu* menu ) /*********************************************************************************/ /* Create the wxMenuitem list for footprint editing */ { wxMenu* sub_menu_footprint; int flags = aModule->m_Flags; wxString msg; sub_menu_footprint = new wxMenu; msg = aModule->MenuText( GetBoard() ); ADD_MENUITEM_WITH_SUBMENU( menu, sub_menu_footprint, -1, msg, module_xpm ); if( !flags ) { msg = AddHotkeyName( _( "Move" ), g_Board_Editor_Hokeys_Descr, HK_MOVE_ITEM ); ADD_MENUITEM( sub_menu_footprint, ID_POPUP_PCB_MOVE_MODULE_REQUEST, msg, move_module_xpm ); msg = AddHotkeyName( _( "Drag" ), g_Board_Editor_Hokeys_Descr, HK_DRAG_ITEM ); ADD_MENUITEM( sub_menu_footprint, ID_POPUP_PCB_DRAG_MODULE_REQUEST, msg, drag_module_xpm ); } msg = AddHotkeyName( _( "Rotate +" ), g_Board_Editor_Hokeys_Descr, HK_ROTATE_ITEM ); ADD_MENUITEM( sub_menu_footprint, ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE, msg, rotate_module_pos_xpm ); ADD_MENUITEM( sub_menu_footprint, ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE, _( "Rotate -" ), rotate_module_neg_xpm ); msg = AddHotkeyName( _( "Flip" ), g_Board_Editor_Hokeys_Descr, HK_FLIP_FOOTPRINT ); ADD_MENUITEM( sub_menu_footprint, ID_POPUP_PCB_CHANGE_SIDE_MODULE, msg, invert_module_xpm ); if( !flags ) { msg = AddHotkeyName( _( "Edit" ), g_Board_Editor_Hokeys_Descr, HK_EDIT_ITEM ); ADD_MENUITEM( sub_menu_footprint, ID_POPUP_PCB_EDIT_MODULE, msg, edit_module_xpm ); sub_menu_footprint->AppendSeparator(); ADD_MENUITEM( sub_menu_footprint, ID_POPUP_PCB_DELETE_MODULE, _( "Delete Module" ), delete_module_xpm ); } } /********************************************************************/ void WinEDA_PcbFrame::createPopUpMenuForFpTexts( TEXTE_MODULE* FpText, wxMenu* menu ) /********************************************************************/ /* Create the wxMenuitem list for editing texts on footprints */ { wxMenu* sub_menu_Fp_text; int flags = FpText->m_Flags; wxString msg = FpText->MenuText( GetBoard() ); sub_menu_Fp_text = new wxMenu; ADD_MENUITEM_WITH_SUBMENU( menu, sub_menu_Fp_text, -1, msg, footprint_text_xpm ); if( !flags ) { msg = AddHotkeyName( _( "Move" ), g_Board_Editor_Hokeys_Descr, HK_MOVE_ITEM ); ADD_MENUITEM( sub_menu_Fp_text, ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST, msg, move_field_xpm ); } msg = AddHotkeyName( _( "Rotate" ), g_Board_Editor_Hokeys_Descr, HK_ROTATE_ITEM ); ADD_MENUITEM( sub_menu_Fp_text, ID_POPUP_PCB_ROTATE_TEXTMODULE, msg, rotate_field_xpm ); if( !flags ) { msg = AddHotkeyName( _( "Edit" ), g_Board_Editor_Hokeys_Descr, HK_EDIT_ITEM ); ADD_MENUITEM( sub_menu_Fp_text, ID_POPUP_PCB_EDIT_TEXTMODULE, msg, edit_text_xpm ); } if( !flags && FpText->m_Type == TEXT_is_DIVERS ) // Graphic texts can be deleted only if are not currently edited { ADD_MENUITEM( sub_menu_Fp_text, ID_POPUP_PCB_DELETE_TEXTMODULE, _( "Delete" ), delete_xpm ); } if( !flags ) { MODULE* module = (MODULE*) FpText->GetParent(); if( module ) { menu->AppendSeparator(); createPopUpMenuForFootprints( module, menu ); } } } /************************************************************************/ void WinEDA_PcbFrame::createPopUpMenuForFpPads( D_PAD* Pad, wxMenu* menu ) /************************************************************************/ /* Create pop menu for pads * also update Netclass selection */ { wxMenu* sub_menu_Pad; int flags = Pad->m_Flags; if( flags ) // Currently in edit, no others commands possible return; GetBoard()->SetCurrentNetClass( Pad->GetNetClassName() ); m_TrackAndViasSizesList_Changed = true; AuxiliaryToolBar_Update_UI(); wxString msg = Pad->MenuText( GetBoard() ); sub_menu_Pad = new wxMenu; ADD_MENUITEM_WITH_SUBMENU( menu, sub_menu_Pad, -1, msg, pad_xpm ); ADD_MENUITEM( sub_menu_Pad, ID_POPUP_PCB_MOVE_PAD_REQUEST, _( "Move" ), move_pad_xpm ); ADD_MENUITEM( sub_menu_Pad, ID_POPUP_PCB_DRAG_PAD_REQUEST, _( "Drag" ), drag_pad_xpm ); ADD_MENUITEM( sub_menu_Pad, ID_POPUP_PCB_EDIT_PAD, _( "Edit" ), options_pad_xpm ); sub_menu_Pad->AppendSeparator(); ADD_MENUITEM_WITH_HELP( sub_menu_Pad, ID_POPUP_PCB_IMPORT_PAD_SETTINGS, _( "Copy Current Settings to this Pad" ), wxEmptyString, options_new_pad_xpm ); ADD_MENUITEM_WITH_HELP( sub_menu_Pad, ID_POPUP_PCB_EXPORT_PAD_SETTINGS, _( "Copy this Pad Settings to Current Settings" ), wxEmptyString, export_options_pad_xpm ); ADD_MENUITEM_WITH_HELP( sub_menu_Pad, ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS, _( "Global Pads Edition" ), _( "Copy this pad settings to all pads in this footprint (or similar footprints)" ), global_options_pad_xpm ); sub_menu_Pad->AppendSeparator(); ADD_MENUITEM( sub_menu_Pad, ID_POPUP_PCB_DELETE_PAD, _( "Delete" ), delete_pad_xpm ); if( m_HTOOL_current_state == ID_TOOLBARH_PCB_MODE_TRACKS ) { menu->Append( ID_POPUP_PCB_AUTOROUTE_PAD, _( "Autoroute Pad" ) ); menu->Append( ID_POPUP_PCB_AUTOROUTE_NET, _( "Autoroute Net" ) ); } MODULE* module = (MODULE*) Pad->GetParent(); if( module ) { menu->AppendSeparator(); createPopUpMenuForFootprints( module, menu ); } } /*****************************************************************************/ void WinEDA_PcbFrame::createPopUpMenuForTexts( TEXTE_PCB* Text, wxMenu* menu ) /*****************************************************************************/ /* Create pop menu for pcb texts */ { wxMenu* sub_menu_Text; int flags = Text->m_Flags; wxString msg = Text->MenuText( GetBoard() ); sub_menu_Text = new wxMenu; ADD_MENUITEM_WITH_SUBMENU( menu, sub_menu_Text, -1, msg, add_text_xpm ); if( !flags ) { msg = AddHotkeyName( _( "Move" ), g_Board_Editor_Hokeys_Descr, HK_MOVE_ITEM ); ADD_MENUITEM( sub_menu_Text, ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST, msg, move_text_xpm ); } msg = AddHotkeyName( _( "Rotate" ), g_Board_Editor_Hokeys_Descr, HK_ROTATE_ITEM ); ADD_MENUITEM( sub_menu_Text, ID_POPUP_PCB_ROTATE_TEXTEPCB, msg, rotate_pos_xpm ); msg = AddHotkeyName( _( "Edit" ), g_Board_Editor_Hokeys_Descr, HK_EDIT_ITEM ); ADD_MENUITEM( sub_menu_Text, ID_POPUP_PCB_EDIT_TEXTEPCB, msg, edit_text_xpm ); sub_menu_Text->AppendSeparator(); ADD_MENUITEM( sub_menu_Text, ID_POPUP_PCB_DELETE_TEXTEPCB, _( "Delete" ), delete_text_xpm ); } /**********************************************************************/ void WinEDA_PcbFrame::createPopUpMenuForMarkers( MARKER_PCB* aMarker, wxMenu* aPopMenu ) /**********************************************************************/ { ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_DELETE_MARKER, _( "Delete Marker" ), delete_xpm ); ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_GETINFO_MARKER, _( "Marker Error Info" ), info_xpm ); } /*******************************************************/ static wxMenu* Append_Track_Width_List( BOARD* aBoard ) /*******************************************************/ /** * Function Append_Track_Width_List * creates a wxMenu * which shows the last used track widths and via diameters * @return a pointeur to the menu */ { wxString msg; wxMenu* trackwidth_menu; wxString value; trackwidth_menu = new wxMenu; trackwidth_menu->Append( ID_POPUP_PCB_SELECT_AUTO_WIDTH, _( "Auto Width" ), _( "Use the track width when starting on a track, otherwise the current track width" ), true ); if( aBoard->GetBoardDesignSettings()->m_UseConnectedTrackWidth ) trackwidth_menu->Check( ID_POPUP_PCB_SELECT_AUTO_WIDTH, true ); if( aBoard->m_ViaSizeSelector != 0 || aBoard->m_TrackWidthSelector != 0 || aBoard->GetBoardDesignSettings()->m_UseConnectedTrackWidth ) trackwidth_menu->Append( ID_POPUP_PCB_SELECT_USE_NETCLASS_VALUES, _( "Use Netclass Values" ), _( "Use track and via sizes from their Netclass values" ), true ); for( unsigned ii = 0; ii < aBoard->m_TrackWidthList.size(); ii++ ) { value = ReturnStringFromValue( g_UserUnit, aBoard->m_TrackWidthList[ii], PCB_INTERNAL_UNIT, true ); msg.Printf( _( "Track %s" ), GetChars( value ) ); if( ii == 0 ) msg << _( " (use NetClass)" ); trackwidth_menu->Append( ID_POPUP_PCB_SELECT_WIDTH1 + ii, msg, wxEmptyString, true ); } if( aBoard->GetBoardDesignSettings()->m_UseConnectedTrackWidth ) trackwidth_menu->Check( ID_POPUP_PCB_SELECT_AUTO_WIDTH, true ); else { if( aBoard->m_TrackWidthSelector < aBoard->m_TrackWidthList.size() ) trackwidth_menu->Check( ID_POPUP_PCB_SELECT_WIDTH1 + aBoard->m_TrackWidthSelector, true ); } trackwidth_menu->AppendSeparator(); for( unsigned ii = 0; ii < aBoard->m_ViasDimensionsList.size(); ii++ ) { value = ReturnStringFromValue( g_UserUnit, aBoard->m_ViasDimensionsList[ii].m_Diameter, PCB_INTERNAL_UNIT, true ); wxString drill = ReturnStringFromValue( g_UserUnit, aBoard->m_ViasDimensionsList[ii].m_Drill, PCB_INTERNAL_UNIT, true ); if( aBoard->m_ViasDimensionsList[ii].m_Drill <= 0 ) msg.Printf( _( "Via %s" ), GetChars( value ) ); else { msg.Printf( _( "Via %s; (drl %s)" ), GetChars( value ), GetChars( drill ) ); } if( ii == 0 ) msg << _( " (use NetClass)" ); trackwidth_menu->Append( ID_POPUP_PCB_SELECT_VIASIZE1 + ii, msg, wxEmptyString, true ); } if( aBoard->m_ViaSizeSelector < aBoard->m_ViasDimensionsList.size() ) trackwidth_menu->Check( ID_POPUP_PCB_SELECT_VIASIZE1 + aBoard->m_ViaSizeSelector, true ); return trackwidth_menu; }