/*
 * This program source code file is part of KiCad, a free EDA CAD application.
 *
 * Copyright (C) 2012 Jean-Pierre Charras, jean-pierre.charras@ujf-grenoble.fr
 * Copyright (C) 2012 SoftPLC Corporation, Dick Hollenbeck <dick@softplc.com>
 * Copyright (C) 2012 Wayne Stambaugh <stambaughw@verizon.net>
 * Copyright (C) 1992-2012 KiCad Developers, see AUTHORS.txt for contributors.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, you may find one here:
 * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
 * or you may search the http://www.gnu.org website for the version 2 license,
 * or you may write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
 */

/**
 * @file editrack-part2.cpp
 */


#include <fctsys.h>
#include <gr_basic.h>
#include <class_drawpanel.h>
#include <confirm.h>
#include <wxPcbStruct.h>

#include <class_board.h>
#include <class_module.h>
#include <class_track.h>
#include <class_marker_pcb.h>

#include <pcbnew.h>
#include <drc_stuff.h>


bool PCB_EDIT_FRAME::Other_Layer_Route( TRACK* aTrack, wxDC* DC )
{
    unsigned    itmp;

    if( aTrack == NULL )
    {
        if( GetActiveLayer() != ((PCB_SCREEN*)GetScreen())->m_Route_Layer_TOP )
            SetActiveLayer( ((PCB_SCREEN*)GetScreen())->m_Route_Layer_TOP );
        else
            SetActiveLayer(((PCB_SCREEN*)GetScreen())->m_Route_Layer_BOTTOM );

        UpdateStatusBar();
        return true;
    }

    // Avoid more than one via on the current location:
    if( GetBoard()->GetViaByPosition( g_CurrentTrackSegment->GetEnd(),
                                      g_CurrentTrackSegment->GetLayer() ) )
        return false;

    for( TRACK* segm = g_FirstTrackSegment;  segm;  segm = segm->Next() )
    {
        if( segm->Type() == PCB_VIA_T && g_CurrentTrackSegment->GetEnd() == segm->GetStart() )
            return false;
    }

    // Is the current segment Ok (no DRC error) ?
    if( g_Drc_On )
    {
        if( BAD_DRC==m_drc->Drc( g_CurrentTrackSegment, GetBoard()->m_Track ) )
            // DRC error, the change layer is not made
            return false;

        // Handle 2 segments.
        if( g_TwoSegmentTrackBuild && g_CurrentTrackSegment->Back() )
        {
            if( BAD_DRC == m_drc->Drc( g_CurrentTrackSegment->Back(), GetBoard()->m_Track ) )
                return false;
        }
    }

    /* Save current state before placing a via.
     * If the via cannot be placed this current state will be reused
     */
    itmp = g_CurrentTrackList.GetCount();
    Begin_Route( g_CurrentTrackSegment, DC );

    m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );

    // create the via
    VIA* via = new VIA( GetBoard() );
    via->SetFlags( IS_NEW );
    via->SetViaType( GetDesignSettings().m_CurrentViaType );
    via->SetWidth( GetDesignSettings().GetCurrentViaSize());
    via->SetNetCode( GetBoard()->GetHighLightNetCode() );
    via->SetEnd( g_CurrentTrackSegment->GetEnd() );
    via->SetStart( g_CurrentTrackSegment->GetEnd() );

    // Usual via is from copper to component.
    // layer pair is B_Cu and F_Cu.
    via->SetLayerPair( B_Cu, F_Cu );
    via->SetDrill( GetDesignSettings().GetCurrentViaDrill() );

    LAYER_ID first_layer = GetActiveLayer();
    LAYER_ID last_layer;

    // prepare switch to new active layer:
    if( first_layer != GetScreen()->m_Route_Layer_TOP )
        last_layer = GetScreen()->m_Route_Layer_TOP;
    else
        last_layer = GetScreen()->m_Route_Layer_BOTTOM;

    // Adjust the actual via layer pair
    switch( via->GetViaType() )
    {
    case VIA_BLIND_BURIED:
        via->SetLayerPair( first_layer, last_layer );
        break;

    case VIA_MICROVIA:  // from external to the near neighbor inner layer
        {
            LAYER_ID last_inner_layer = ToLAYER_ID( ( GetBoard()->GetCopperLayerCount() - 2 ) );

            if( first_layer == B_Cu )
                last_layer = last_inner_layer;
            else if( first_layer == F_Cu )
                last_layer = In1_Cu;
            else if( first_layer == last_inner_layer )
                last_layer = B_Cu;
            else if( first_layer == In1_Cu )
                last_layer = F_Cu;

            // else error: will be removed later
            via->SetLayerPair( first_layer, last_layer );
            {
                NETINFO_ITEM* net = via->GetNet();
                via->SetWidth( net->GetMicroViaSize() );
            }
        }
        break;

    default:
        break;
    }

    if( g_Drc_On && BAD_DRC == m_drc->Drc( via, GetBoard()->m_Track ) )
    {
        // DRC fault: the Via cannot be placed here ...
        delete via;

        m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );

        // delete the track(s) added in Begin_Route()
        while( g_CurrentTrackList.GetCount() > itmp )
        {
            Delete_Segment( DC, g_CurrentTrackSegment );
        }

         SetCurItem( g_CurrentTrackSegment, false );

        // Refresh DRC diag, erased by previous calls
        if( m_drc->GetCurrentMarker() )
            SetMsgPanel( m_drc->GetCurrentMarker() );

        return false;
    }

    SetActiveLayer( last_layer );

    TRACK*  lastNonVia = g_CurrentTrackSegment;

    /* A new via was created. It was Ok.
     */
    g_CurrentTrackList.PushBack( via );

    /* The via is now in linked list and we need a new track segment
     * after the via, starting at via location.
     * it will become the new current segment (from via to the mouse cursor)
     */

    TRACK* track = (TRACK*)lastNonVia->Clone();

    /* the above creates a new segment from the last entered segment, with the
     * current width, flags, netcode, etc... values.
     * layer, start and end point are not correct,
     * and will be modified next
     */

    // set the layer to the new value
    track->SetLayer( GetActiveLayer() );

    /* the start point is the via position and the end point is the cursor
     * which also is on the via (will change when moving mouse)
     */
    track->SetEnd( via->GetStart() );
    track->SetStart( via->GetStart() );

    g_CurrentTrackList.PushBack( track );

    if( g_TwoSegmentTrackBuild )
    {
        // Create a second segment (we must have 2 track segments to adjust)
        g_CurrentTrackList.PushBack( (TRACK*)g_CurrentTrackSegment->Clone() );
    }

    m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
    SetMsgPanel( via );
    UpdateStatusBar();

    return true;
}


void PCB_EDIT_FRAME::Show_1_Ratsnest( EDA_ITEM* item, wxDC* DC )
{
    D_PAD*   pt_pad = NULL;
    MODULE*  Module = NULL;

    if( GetBoard()->IsElementVisible(RATSNEST_VISIBLE) )
        return;

    if( ( GetBoard()->m_Status_Pcb & LISTE_RATSNEST_ITEM_OK ) == 0 )
        Compile_Ratsnest( DC, true );

    if( item )
    {
        if( item->Type() == PCB_PAD_T )
        {
            pt_pad = (D_PAD*) item;
            Module = (MODULE*) pt_pad->GetParent();
        }

        if( pt_pad ) // Displaying the ratsnest of the corresponding net.
        {
            SetMsgPanel( pt_pad );

            for( unsigned ii = 0; ii < GetBoard()->GetRatsnestsCount(); ii++ )
            {
                RATSNEST_ITEM* net = &GetBoard()->m_FullRatsnest[ii];

                if( net->GetNet() == pt_pad->GetNetCode() )
                {
                    if( ( net->m_Status & CH_VISIBLE ) != 0 )
                        continue;

                    net->m_Status |= CH_VISIBLE;

                    if( ( net->m_Status & CH_ACTIF ) == 0 )
                        continue;

                    net->Draw( m_canvas, DC, GR_XOR, wxPoint( 0, 0 ) );
                }
            }
        }
        else
        {
            if( item->Type() == PCB_MODULE_TEXT_T )
            {
                if( item->GetParent() && ( item->GetParent()->Type() == PCB_MODULE_T ) )
                    Module = (MODULE*) item->GetParent();
            }
            else if( item->Type() == PCB_MODULE_T )
            {
                Module = (MODULE*) item;
            }

            if( Module )
            {
                SetMsgPanel( Module );
                pt_pad = Module->Pads();

                for( ; pt_pad != NULL; pt_pad = (D_PAD*) pt_pad->Next() )
                {
                    for( unsigned ii = 0; ii < GetBoard()->GetRatsnestsCount(); ii++ )
                    {
                        RATSNEST_ITEM* net = &GetBoard()->m_FullRatsnest[ii];

                        if( ( net->m_PadStart == pt_pad ) || ( net->m_PadEnd == pt_pad ) )
                        {
                            if( net->m_Status & CH_VISIBLE )
                                continue;

                            net->m_Status |= CH_VISIBLE;

                            if( (net->m_Status & CH_ACTIF) == 0 )
                                continue;

                            net->Draw( m_canvas, DC, GR_XOR, wxPoint( 0, 0 ) );
                        }
                    }
                }

                pt_pad = NULL;
            }
        }
    }

    // Erase if no pad or module has been selected.
    if( ( pt_pad == NULL ) && ( Module == NULL ) )
    {
        DrawGeneralRatsnest( DC );

        for( unsigned ii = 0; ii < GetBoard()->GetRatsnestsCount(); ii++ )
            GetBoard()->m_FullRatsnest[ii].m_Status &= ~CH_VISIBLE;
    }
}