/**************************************************************/ /* pcbstruct.h : definition des structures de donnees type PCB */ /**************************************************************/ #ifndef PCBSTRUCT_H #define PCBSTRUCT_H #include "base_struct.h" #include "class_base_screen.h" #include "board_item_struct.h" // Definitions relatives aux libariries #define ENTETE_LIBRAIRIE "PCBNEW-LibModule-V1" #define ENTETE_LIBDOC "PCBNEW-LibDoc----V1" #define L_ENTETE_LIB 18 #define EXT_DOC wxT( "mdc" ) /* Bits indicateurs du membre .Status, pour pistes, modules... */ #define FLAG1 (1 << 13) /* flag libre pour calculs locaux */ #define FLAG0 (1 << 12) /* flag libre pour calculs locaux */ #define BEGIN_ONPAD (1 << 11) /* flag indiquant un debut de segment sur pad */ #define END_ONPAD (1 << 10) /* flag indiquant une fin de segment sur pad */ #define BUSY (1 << 9) /* flag indiquant que la structure a deja * ete examinee, dans certaines routines */ #define DELETED (1 << 8) /* Bit flag de Status pour structures effacee * et mises en chaine "DELETED" */ #define NO_TRACE (1 << 7) /* l'element ne doit pas etre affiche */ #define SURBRILL (1 << 5) /* element en surbrillance */ #define DRAG (1 << 4) /* segment en mode drag */ #define EDIT (1 << 3) /* element en cours d'edition */ #define SEGM_FIXE (1 << 2) /* segment FIXE ( pas d'effacement global ) */ #define SEGM_AR (1 << 1) /* segment Auto_Route */ #define CHAIN (1 << 0) /* segment marque */ /* Layer identification (layer number) */ #define FIRST_COPPER_LAYER 0 #define COPPER_LAYER_N 0 #define LAYER_N_2 1 /* Numero layer 2 */ #define LAYER_N_3 2 /* Numero layer 3 */ #define LAYER_N_4 3 /* Numero layer 4 */ #define LAYER_N_5 4 /* Numero layer 5 */ #define LAYER_N_6 5 /* Numero layer 6 */ #define LAYER_N_7 6 /* Numero layer 7 */ #define LAYER_N_8 7 /* Numero layer 8 */ #define LAYER_N_9 8 /* Numero layer 9 */ #define LAYER_N_10 9 /* Numero layer 10 */ #define LAYER_N_11 10 /* Numero layer 11 */ #define LAYER_N_12 11 /* Numero layer 12 */ #define LAYER_N_13 12 /* Numero layer 13 */ #define LAYER_N_14 13 /* Numero layer 14 */ #define LAYER_N_15 14 /* Numero layer 15 */ #define LAYER_CMP_N 15 #define CMP_N 15 #define LAST_COPPER_LAYER 15 #define NB_COPPER_LAYERS (LAST_COPPER_LAYER + 1) #define FIRST_NO_COPPER_LAYER 16 #define ADHESIVE_N_CU 16 #define ADHESIVE_N_CMP 17 #define SOLDERPASTE_N_CU 18 #define SOLDERPASTE_N_CMP 19 #define SILKSCREEN_N_CU 20 #define SILKSCREEN_N_CMP 21 #define SOLDERMASK_N_CU 22 #define SOLDERMASK_N_CMP 23 #define DRAW_N 24 #define COMMENT_N 25 #define ECO1_N 26 #define ECO2_N 27 #define EDGE_N 28 #define LAST_NO_COPPER_LAYER 28 #define NB_LAYERS (LAST_NO_COPPER_LAYER + 1) #define LAYER_COUNT 32 /*************************************/ /* constantes de gestion des couches */ /*************************************/ #define CUIVRE_LAYER (1 << COPPER_LAYER_N) ///< bit mask for copper layer #define LAYER_2 (1 << LAYER_N_2) ///< bit mask for layer 2 #define LAYER_3 (1 << LAYER_N_3) ///< bit mask for layer 3 #define LAYER_4 (1 << LAYER_N_4) ///< bit mask for layer 4 #define LAYER_5 (1 << LAYER_N_5) ///< bit mask for layer 5 #define LAYER_6 (1 << LAYER_N_6) ///< bit mask for layer 6 #define LAYER_7 (1 << LAYER_N_7) ///< bit mask for layer 7 #define LAYER_8 (1 << LAYER_N_8) ///< bit mask for layer 8 #define LAYER_9 (1 << LAYER_N_9) ///< bit mask for layer 9 #define LAYER_10 (1 << LAYER_N_10) ///< bit mask for layer 10 #define LAYER_11 (1 << LAYER_N_11) ///< bit mask for layer 11 #define LAYER_12 (1 << LAYER_N_12) ///< bit mask for layer 12 #define LAYER_13 (1 << LAYER_N_13) ///< bit mask for layer 13 #define LAYER_14 (1 << LAYER_N_14) ///< bit mask for layer 14 #define LAYER_15 (1 << LAYER_N_15) ///< bit mask for layer 15 #define CMP_LAYER (1 << LAYER_CMP_N) ///< bit mask for component layer #define ADHESIVE_LAYER_CU (1 << ADHESIVE_N_CU) #define ADHESIVE_LAYER_CMP (1 << ADHESIVE_N_CMP) #define SOLDERPASTE_LAYER_CU (1 << SOLDERPASTE_N_CU) #define SOLDERPASTE_LAYER_CMP (1 << SOLDERPASTE_N_CMP) #define SILKSCREEN_LAYER_CU (1 << SILKSCREEN_N_CU) #define SILKSCREEN_LAYER_CMP (1 << SILKSCREEN_N_CMP) #define SOLDERMASK_LAYER_CU (1 << SOLDERMASK_N_CU) #define SOLDERMASK_LAYER_CMP (1 << SOLDERMASK_N_CMP) #define DRAW_LAYER (1 << DRAW_N) #define COMMENT_LAYER (1 << COMMENT_N) #define ECO1_LAYER (1 << ECO1_N) #define ECO2_LAYER (1 << ECO2_N) #define EDGE_LAYER (1 << EDGE_N) #define FIRST_NON_COPPER_LAYER ADHESIVE_N_CU #define LAST_NON_COPPER_LAYER EDGE_N // extra bits 0xE0000000 /* masques generaux : */ #define ALL_LAYERS 0x1FFFFFFF #define ALL_NO_CU_LAYERS 0x1FFF0000 #define ALL_CU_LAYERS 0x0000FFFF #define INTERNAL_LAYERS 0x00007FFE /* Bits layers internes */ #define EXTERNAL_LAYERS 0x00008001 /* Forward declaration */ class EQUIPOT; class MARKER; struct CHEVELU; //class Ki_PageDescr; //class DrawBlockStruct; /* main window classes : */ #include "wxPcbStruct.h" /* Class to handle a board */ #include "class_board.h" // Class for handle current printed board design settings #define HISTORY_NUMBER 8 class EDA_BoardDesignSettings { public: int m_CopperLayerCount; // Number of copper layers for this design int m_ViaDrill; // via drill (for the entire board) int m_ViaDrillCustomValue; // via drill for vias which must have a defined drill value int m_MicroViaDrill; // micro via drill (for the entire board) int m_CurrentViaSize; // Current via size int m_CurrentMicroViaSize; // Current micro via size bool m_MicroViasAllowed; // true to allow micro vias int m_ViaSizeHistory[HISTORY_NUMBER]; // Last HISTORY_NUMBER used via sizes int m_CurrentViaType; // via type (VIA_BLIND_BURIED, VIA_TROUGHT VIA_MICROVIA) int m_CurrentTrackWidth; // current track width bool m_UseConnectedTrackWidth; // if true, when creating a new track starting on an existing track, use this track width int m_TrackWidthHistory[HISTORY_NUMBER]; // Last HISTORY_NUMBER used track widths int m_DrawSegmentWidth; // current graphic line width (not EDGE layer) int m_EdgeSegmentWidth; // current graphic line width (EDGE layer only) int m_PcbTextWidth; // current Pcb (not module) Text width wxSize m_PcbTextSize; // current Pcb (not module) Text size int m_TrackClearence; // track to track and track to pads clearance int m_MaskMargin; // Solder mask margin // Color options for screen display of the Printed Board: int m_PcbGridColor; // Grid color int m_LayerColor[32]; // Layer colors (tracks and graphic items) int m_ViaColor[4]; // Via color (depending on is type) int m_ModuleTextCMPColor; // Text module color for modules on the COMPONENT layer int m_ModuleTextCUColor; // Text module color for modules on the COPPER layer int m_ModuleTextNOVColor; // Text module color for "invisible" texts (must be BLACK if really not displayed) int m_AnchorColor; // Anchor color for modules and texts int m_PadCUColor; // Pad color for the COPPER side of the pad int m_PadCMPColor; // Pad color for the COMPONENT side of the pad // Pad color for the pads of both sides is m_PadCUColor OR m_PadCMPColor (in terms of colors) int m_RatsnestColor; // Ratsnest color public: EDA_BoardDesignSettings(); /** * Function GetVisibleLayers * returns a bit-map of all the layers that are visible. * @return int - the visible layers in bit-mapped form. */ int GetVisibleLayers() const; }; // Values for m_DisplayViaMode member: enum DisplayViaMode { VIA_HOLE_NOT_SHOW = 0, VIA_SPECIAL_HOLE_SHOW, ALL_VIA_HOLE_SHOW, OPT_VIA_HOLE_END }; /* Handle info to display a board */ class PCB_SCREEN : public BASE_SCREEN { public: int m_Active_Layer; /* ref couche active */ int m_Route_Layer_TOP; /* ref couches actives */ int m_Route_Layer_BOTTOM; /* pour placement vias et routage 2 couches */ public: PCB_SCREEN(); ~PCB_SCREEN(); PCB_SCREEN* Next() { return (PCB_SCREEN*) Pnext; } void Init(); void SetNextZoom(); void SetPreviousZoom(); void SetLastZoom(); virtual int GetInternalUnits( void ); /** * Function GetCurItem * returns the currently selected BOARD_ITEM, overriding BASE_SCREEN::GetCurItem(). * @return BOARD_ITEM* - the one selected, or NULL. */ BOARD_ITEM* GetCurItem() const { return (BOARD_ITEM*) BASE_SCREEN::GetCurItem(); } /** * Function SetCurItem * sets the currently selected object, m_CurrentItem. * @param aItem Any object derived from BOARD_ITEM */ void SetCurItem( BOARD_ITEM* aItem ) { BASE_SCREEN::SetCurItem( aItem ); } /* Return true if a microvia can be put on board * A microvia ia a small via restricted to 2 near neighbour layers * because its is hole is made by laser which can penetrate only one layer * It is mainly used to connect BGA to the first inner layer * And it is allowed from an external layer to the first inner layer */ bool IsMicroViaAcceptable( void ); }; /**********************************/ /* Module (Footprint) description */ /**********************************/ #include "class_pad.h" // class for pads #include "class_edge_mod.h" // Class for footprint graphic elements #include "class_text_mod.h" // Class for footprint fields #include "class_module.h" // Class for the footprint #include "class_equipot.h" /***********************************/ /* Description des elements du PCB */ /***********************************/ #include "class_drawsegment.h" #include "class_pcb_text.h" #include "class_cotation.h" #include "class_mire.h" #include "class_track.h" #include "class_marker.h" #include "class_zone.h" class DISPLAY_OPTIONS { public: bool DisplayPadFill; bool DisplayPadNum; bool DisplayPadNoConn; bool DisplayPadIsol; int DisplayModEdge; int DisplayModText; bool DisplayPcbTrackFill; /* FALSE = sketch , TRUE = filled */ bool DisplayTrackIsol; int m_DisplayViaMode; /* 0 do not show via hole, * 1 show via hole for non default value * 2 show all via hole */ bool DisplayPolarCood; int DisplayZonesMode; int DisplayNetNamesMode; /* 0 do not show netnames, * 1 show netnames on pads * 2 show netnames on tracks * 3 show netnames on tracks and pads */ bool Show_Modules_Cmp; bool Show_Modules_Cu; int DisplayDrawItems; bool ContrastModeDisplay; public: DISPLAY_OPTIONS(); }; #endif /* PCBSTRUCT_H */