/* * This program source code file is part of KiCad, a free EDA CAD application. * * Copyright (C) 2019-2022 KiCad Developers, see AUTHORS.txt for contributors. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, you may find one here: * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html * or you may search the http://www.gnu.org website for the version 2 license, * or you may write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA */ #include #include #include #include #include #include #include #include /* * Flag to enable advanced config debugging * * Use "KICAD_ADVANCED_CONFIG" to enable. * * @ingroup trace_env_vars */ static const wxChar AdvancedConfigMask[] = wxT( "KICAD_ADVANCED_CONFIG" ); /** * Limits and default settings for the coroutine stack size allowed. * Warning! Setting the stack size below the default may lead to unexplained crashes * This configuration setting is intended for developers only. */ namespace AC_STACK { static constexpr int min_stack = 32 * 4096; static constexpr int default_stack = 256 * 4096; static constexpr int max_stack = 4096 * 4096; } /** * List of known keys for advanced configuration options. * * Set these options in the file `kicad_advanced` in the * KiCad config directory. */ namespace AC_KEYS { /** * When filling zones, we add an extra amount of clearance to each zone to ensure that rounding * errors do not overrun minimum clearance distances. This is the extra in mm. */ static const wxChar ExtraFillMargin[] = wxT( "ExtraFillMargin" ); /** * A fudge factor for DRC. Required to prevent false positives due to rounding errors, errors * in polygonalization, etc. * Previous versions hard-coded various values from 0.000005mm to 0.002mm. */ static const wxChar DRCEpsilon[] = wxT( "DRCEpsilon" ); /** * Angle and width tolerances for copper and solder mask sliver detection. */ static const wxChar DRCSliverWidthTolerance[] = wxT( "DRCSliverWidthTolerance" ); static const wxChar DRCSliverAngleTolerance[] = wxT( "DRCSliverAngleTolerance" ); /** * Used to calculate the actual hole size from the finish hole size. * IPC-6012 says 0.015-0.018mm; Cadence says at least 0.020mm for a Class 2 board and at least * 0.025mm for Class 3. */ static const wxChar HoleWallThickness[] = wxT( "HoleWallPlatingThickness" ); /** * Testing mode for new connectivity algorithm. Setting this to on will cause all modifications * to the netlist to be recalculated on the fly. This may be slower than the standard process * at the moment */ static const wxChar RealtimeConnectivity[] = wxT( "RealtimeConnectivity" ); /** * Configure the coroutine stack size in bytes. This should be allocated in multiples of * the system page size (n*4096 is generally safe) */ static const wxChar CoroutineStackSize[] = wxT( "CoroutineStackSize" ); /** * Show PNS router debug graphics while routing */ static const wxChar ShowRouterDebugGraphics[] = wxT( "ShowRouterDebugGraphics" ); /** * When set to true, this will wrap polygon point sets at 4 points per line rather * than a single point per line. Single point per line helps with version control systems */ static const wxChar CompactFileSave[] = wxT( "CompactSave" ); /** * For drawsegments - arcs. * Distance from an arc end point and the estimated end point, * when rotating from the start point to the end point. * 0 will not allow any approximate result, and the arc will not show. * Squared value for performances, in system unit. */ static const wxChar DrawArcAccuracy[] = wxT( "DrawArcAccuracy" ); /** * For drawsegments - arcs. * When drawing an arc, the angle ( center - start ) - ( start - end ), * can be limited to avoid extremely high radii. * The value is the tan( angle ) */ static const wxChar DrawArcCenterStartEndMaxAngle[] = wxT( "DrawArcCenterStartEndMaxAngle" ); /** * For arc track interactive drag-resizing * Maximum angle between the tangent line of an arc track and a connected straight track * in order to commence arc dragging. Units are degrees. */ static const wxChar MaxTangentTrackAngleDeviation[] = wxT( "MaxTangentTrackAngleDeviation" ); /** * For arc track interactive drag-resizing * Maximum track length to keep after doing an arc track resizing operation. Units are mm. */ static const wxChar MaxTrackLengthToKeep[] = wxT( "MaxTrackLengthToKeep" ); /** * When true, GAL will stroke the triangulations (only used in OpenGL) with a visible color */ static const wxChar StrokeTriangulation[] = wxT( "StrokeTriangulation" ); /** * When true, a third zone-display-mode is included which strokes the filled areas and fracture * boundaries. */ static const wxChar ExtraZoneDisplayModes[] = wxT( "ExtraZoneDisplayModes" ); /** * Absolute minimum pen width to send to the plotter. PDF seems happy enough with 0.0212mm * (which equates to 1px @ 1200dpi). */ static const wxChar MinPlotPenWidth[] = wxT( "MinPlotPenWidth" ); static const wxChar DebugZoneFiller[] = wxT( "DebugZoneFiller" ); static const wxChar DebugPDFWriter[] = wxT( "DebugPDFWriter" ); /** * The diameter of the drill marks on print and plot outputs (in mm), * when the "Drill marks" option is set to "Small mark" */ static const wxChar SmallDrillMarkSize[] = wxT( "SmallDrillMarkSize" ); static const wxChar HotkeysDumper[] = wxT( "HotkeysDumper" ); static const wxChar DrawBoundingBoxes[] = wxT( "DrawBoundingBoxes" ); static const wxChar ShowPcbnewExportNetlist[] = wxT( "ShowPcbnewExportNetlist" ); static const wxChar Skip3DModelFileCache[] = wxT( "Skip3DModelFileCache" ); static const wxChar Skip3DModelMemoryCache[] = wxT( "Skip3DModelMemoryCache" ); static const wxChar HideVersionFromTitle[] = wxT( "HideVersionFromTitle" ); static const wxChar TraceMasks[] = wxT( "TraceMasks" ); static const wxChar ShowRepairSchematic[] = wxT( "ShowRepairSchematic" ); static const wxChar ShowEventCounters[] = wxT( "ShowEventCounters" ); static const wxChar AllowManualCanvasScale[] = wxT( "AllowManualCanvasScale" ); static const wxChar UpdateUIEventInterval[] = wxT( "UpdateUIEventInterval" ); static const wxChar AllowTeardrops[] = wxT( "AllowTeardrops" ); static const wxChar V3DRT_BevelHeight_um[] = wxT( "V3DRT_BevelHeight_um" ); static const wxChar V3DRT_BevelExtentFactor[] = wxT( "V3DRT_BevelExtentFactor" ); } // namespace KEYS /** * List of known groups for advanced configuration options. * */ namespace AC_GROUPS { static const wxChar V3D_RayTracing[] = wxT( "G_3DV_RayTracing" ); } /* * Get a simple string for common parameters. * * This isn't exhaustive, but it covers most common types that might be * used in the advance config */ wxString dumpParamCfg( const PARAM_CFG& aParam ) { wxString s = aParam.m_Ident + ": "; /* * This implementation is rather simplistic, but it is * effective enough for simple uses. A better implementation would be * some kind of visitor, but that's somewhat more work. */ switch( aParam.m_Type ) { case paramcfg_id::PARAM_INT: case paramcfg_id::PARAM_INT_WITH_SCALE: s << *static_cast( aParam ).m_Pt_param; break; case paramcfg_id::PARAM_DOUBLE: s << *static_cast( aParam ).m_Pt_param; break; case paramcfg_id::PARAM_WXSTRING: s << *static_cast( aParam ).m_Pt_param; break; case paramcfg_id::PARAM_FILENAME: s << *static_cast( aParam ).m_Pt_param; break; case paramcfg_id::PARAM_BOOL: s << ( *static_cast( aParam ).m_Pt_param ? "true" : "false" ); break; default: s << "Unsupported PARAM_CFG variant: " << aParam.m_Type; } return s; } /** * Dump the configs in the given array to trace. */ static void dumpCfg( const std::vector& aArray ) { // only dump if we need to if( !wxLog::IsAllowedTraceMask( AdvancedConfigMask ) ) return; for( const PARAM_CFG* param : aArray ) { wxLogTrace( AdvancedConfigMask, dumpParamCfg( *param ) ); } } /** * Get the filename for the advanced config file * * The user must check the file exists if they care. */ static wxFileName getAdvancedCfgFilename() { const static wxString cfg_filename{ "kicad_advanced" }; return wxFileName( SETTINGS_MANAGER::GetUserSettingsPath(), cfg_filename ); } ADVANCED_CFG::ADVANCED_CFG() { wxLogTrace( AdvancedConfigMask, "Init advanced config" ); // Init defaults - this is done in case the config doesn't exist, // then the values will remain as set here. m_RealTimeConnectivity = true; m_CoroutineStackSize = AC_STACK::default_stack; m_ShowRouterDebugGraphics = false; m_DrawArcAccuracy = 10.0; m_DrawArcCenterMaxAngle = 50.0; m_MaxTangentAngleDeviation = 1.0; m_MaxTrackLengthToKeep = 0.0005; m_ExtraZoneDisplayModes = false; m_DrawTriangulationOutlines = false; m_ExtraClearance = 0.0005; m_DRCEpsilon = 0.0005; // 0.5um is small enough not to materially violate // any constraints. m_SliverWidthTolerance = 0.08; m_SliverAngleTolerance = 20.0; m_HoleWallThickness = 0.020; // IPC-6012 says 15-18um; Cadence says at least // 0.020 for a Class 2 board and at least 0.025 // for Class 3. m_MinPlotPenWidth = 0.0212; // 1 pixel at 1200dpi. m_DebugZoneFiller = false; m_DebugPDFWriter = false; m_SmallDrillMarkSize = 0.35; m_HotkeysDumper = false; m_DrawBoundingBoxes = false; m_ShowPcbnewExportNetlist = false; m_Skip3DModelFileCache = false; m_Skip3DModelMemoryCache = false; m_HideVersionFromTitle = false; m_ShowEventCounters = false; m_AllowManualCanvasScale = false; m_CompactSave = false; m_UpdateUIEventInterval = 0; m_AllowTeardrops = false; m_ShowRepairSchematic = false; m_3DRT_BevelHeight_um = 30; m_3DRT_BevelExtentFactor = 1.0 / 16.0; loadFromConfigFile(); } const ADVANCED_CFG& ADVANCED_CFG::GetCfg() { static ADVANCED_CFG instance; return instance; } void ADVANCED_CFG::loadFromConfigFile() { const wxFileName k_advanced = getAdvancedCfgFilename(); // If we are running headless, use the class defaults because we cannot instantiate wxConfig if( !wxTheApp ) return; if( !k_advanced.FileExists() ) { wxLogTrace( AdvancedConfigMask, "File does not exist %s", k_advanced.GetFullPath() ); // load the defaults wxConfig emptyConfig; loadSettings( emptyConfig ); return; } wxLogTrace( AdvancedConfigMask, "Loading advanced config from: %s", k_advanced.GetFullPath() ); wxFileConfig file_cfg( "", "", k_advanced.GetFullPath() ); loadSettings( file_cfg ); } void ADVANCED_CFG::loadSettings( wxConfigBase& aCfg ) { std::vector configParams; configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::RealtimeConnectivity, &m_RealTimeConnectivity, m_RealTimeConnectivity ) ); configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::ExtraFillMargin, &m_ExtraClearance, m_ExtraClearance, 0.0, 1.0 ) ); configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::DRCEpsilon, &m_DRCEpsilon, m_DRCEpsilon, 0.0, 1.0 ) ); configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::DRCSliverWidthTolerance, &m_SliverWidthTolerance, m_SliverWidthTolerance, 0.01, 0.25 ) ); configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::DRCSliverAngleTolerance, &m_SliverAngleTolerance, m_SliverAngleTolerance, 1.0, 90.0 ) ); configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::HoleWallThickness, &m_HoleWallThickness, m_HoleWallThickness, 0.0, 1.0 ) ); configParams.push_back( new PARAM_CFG_INT( true, AC_KEYS::CoroutineStackSize, &m_CoroutineStackSize, AC_STACK::default_stack, AC_STACK::min_stack, AC_STACK::max_stack ) ); configParams.push_back( new PARAM_CFG_INT( true, AC_KEYS::UpdateUIEventInterval, &m_UpdateUIEventInterval, m_UpdateUIEventInterval, -1, 100000 ) ); configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::ShowRouterDebugGraphics, &m_ShowRouterDebugGraphics, m_ShowRouterDebugGraphics ) ); configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::CompactFileSave, &m_CompactSave, m_CompactSave ) ); configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::DrawArcAccuracy, &m_DrawArcAccuracy, m_DrawArcAccuracy, 0.0, 100000.0 ) ); configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::DrawArcCenterStartEndMaxAngle, &m_DrawArcCenterMaxAngle, m_DrawArcCenterMaxAngle, 0.0, 100000.0 ) ); configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::MaxTangentTrackAngleDeviation, &m_MaxTangentAngleDeviation, m_MaxTangentAngleDeviation, 0.0, 90.0 ) ); configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::MaxTrackLengthToKeep, &m_MaxTrackLengthToKeep, m_MaxTrackLengthToKeep, 0.0, 1.0 ) ); configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::ExtraZoneDisplayModes, &m_ExtraZoneDisplayModes, m_ExtraZoneDisplayModes ) ); configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::StrokeTriangulation, &m_DrawTriangulationOutlines, m_DrawTriangulationOutlines ) ); configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::MinPlotPenWidth, &m_MinPlotPenWidth, m_MinPlotPenWidth, 0.0, 1.0 ) ); configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::DebugZoneFiller, &m_DebugZoneFiller, m_DebugZoneFiller ) ); configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::DebugPDFWriter, &m_DebugPDFWriter, m_DebugPDFWriter ) ); configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::SmallDrillMarkSize, &m_SmallDrillMarkSize, m_SmallDrillMarkSize, 0.0, 3.0 ) ); configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::HotkeysDumper, &m_HotkeysDumper, m_HotkeysDumper ) ); configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::DrawBoundingBoxes, &m_DrawBoundingBoxes, m_DrawBoundingBoxes ) ); configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::ShowPcbnewExportNetlist, &m_ShowPcbnewExportNetlist, m_ShowPcbnewExportNetlist ) ); configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::Skip3DModelFileCache, &m_Skip3DModelFileCache, m_Skip3DModelFileCache ) ); configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::Skip3DModelMemoryCache, &m_Skip3DModelMemoryCache, m_Skip3DModelMemoryCache ) ); configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::HideVersionFromTitle, &m_HideVersionFromTitle, m_HideVersionFromTitle ) ); configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::ShowRepairSchematic, &m_ShowRepairSchematic, m_ShowRepairSchematic ) ); configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::ShowEventCounters, &m_ShowEventCounters, m_ShowEventCounters ) ); configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::AllowManualCanvasScale, &m_AllowManualCanvasScale, m_AllowManualCanvasScale ) ); configParams.push_back( new PARAM_CFG_BOOL( true, AC_KEYS::AllowTeardrops, &m_AllowTeardrops, m_AllowTeardrops ) ); configParams.push_back( new PARAM_CFG_INT( true, AC_KEYS::V3DRT_BevelHeight_um, &m_3DRT_BevelHeight_um, m_3DRT_BevelHeight_um, 0, std::numeric_limits::max(), AC_GROUPS::V3D_RayTracing ) ); configParams.push_back( new PARAM_CFG_DOUBLE( true, AC_KEYS::V3DRT_BevelExtentFactor, &m_3DRT_BevelExtentFactor, m_3DRT_BevelExtentFactor, 0.0, 100.0, AC_GROUPS::V3D_RayTracing ) ); // Special case for trace mask setting...we just grab them and set them immediately // Because we even use wxLogTrace inside of advanced config wxString traceMasks = ""; configParams.push_back( new PARAM_CFG_WXSTRING( true, AC_KEYS::TraceMasks, &traceMasks, "" ) ); // Load the config from file wxConfigLoadSetups( &aCfg, configParams ); // Now actually set the trace masks wxStringTokenizer traceMaskTokenizer( traceMasks, "," ); while( traceMaskTokenizer.HasMoreTokens() ) { wxString mask = traceMaskTokenizer.GetNextToken(); wxLog::AddTraceMask( mask ); } dumpCfg( configParams ); for( PARAM_CFG* param : configParams ) delete param; }