/**************************************************************/ /* pcbstruct.h : definition des structures de donnees type PCB */ /**************************************************************/ #ifndef PCBSTRUCT_H #define PCBSTRUCT_H #include "base_struct.h" // Definitions relatives aux libariries #define ENTETE_LIBRAIRIE "PCBNEW-LibModule-V1" #define ENTETE_LIBDOC "PCBNEW-LibDoc----V1" #define L_ENTETE_LIB 18 #define EXT_CMP wxT( ".emp" ) #define EXT_CMP_MASK wxT( "*.emp" ) #define EXT_DOC wxT( ".mdc" ) /* Bits indicateurs du membre .Status, pour pistes, modules... */ #define FLAG1 0x2000 /* flag libre pour calculs locaux */ #define FLAG0 0x1000 /* flag libre pour calculs locaux */ #define BEGIN_ONPAD 0x800 /* flag indiquant un debut de segment sur pad */ #define END_ONPAD 0x400 /* flag indiquant une fin de segment sur pad */ #define BUSY 0x0200 /* flag indiquant que la structure a deja * ete examinee, dans certaines routines */ #define DELETED 0x0100 /* Bit flag de Status pour structures effacee * et mises en chaine "DELETED" */ #define NO_TRACE 0x80 /* l'element ne doit pas etre affiche */ #define SURBRILL 0x20 /* element en surbrillance */ #define DRAG 0x10 /* segment en mode drag */ #define EDIT 0x8 /* element en cours d'edition */ #define SEGM_FIXE 0x04 /* segment FIXE ( pas d'effacement global ) */ #define SEGM_AR 0x02 /* segment Auto_Route */ #define CHAIN 0x01 /* segment marque */ /*************************************/ /* constantes de gestion des couches */ /*************************************/ #define CUIVRE_LAYER 0x00000001 /* Bit layer cuivre */ #define LAYER_2 0x00000002 /* Bit layer 2 */ #define LAYER_3 0x00000004 /* Bit layer 3 */ #define LAYER_4 0x00000008 /* Bit layer 4 */ #define LAYER_5 0x00000010 /* Bit layer 5 */ #define LAYER_6 0x00000020 /* Bit layer 6 */ #define LAYER_7 0x00000040 /* Bit layer 7 */ #define LAYER_8 0x00000080 /* Bit layer 8 */ #define LAYER_9 0x00000100 /* Bit layer 9 */ #define LAYER_10 0x00000200 /* Bit layer 10 */ #define LAYER_11 0x00000400 /* Bit layer 11 */ #define LAYER_12 0x00000800 /* Bit layer 12 */ #define LAYER_13 0x00001000 /* Bit layer 13 */ #define LAYER_14 0x00002000 /* Bit layer 14 */ #define LAYER_15 0x00004000 /* Bit layer 15 */ #define CMP_LAYER 0x00008000 /* Bit layer cmp */ #define ADHESIVE_LAYER_CU 0x00010000 #define ADHESIVE_LAYER_CMP 0x00020000 #define SOLDERPASTE_LAYER_CU 0x00040000 #define SOLDERPASTE_LAYER_CMP 0x00080000 #define SILKSCREEN_LAYER_CU 0x00100000 #define SILKSCREEN_LAYER_CMP 0x00200000 #define SOLDERMASK_LAYER_CU 0x00400000 #define SOLDERMASK_LAYER_CMP 0x00800000 #define DRAW_LAYER 0x01000000 #define COMMENT_LAYER 0x02000000 #define ECO1_LAYER 0x04000000 #define ECO2_LAYER 0x08000000 #define EDGE_LAYER 0x10000000 // extra bits 0xE0000000 /* masques generaux : */ #define ALL_LAYERS 0x1FFFFFFF #define ALL_NO_CU_LAYERS 0x1FFF0000 #define ALL_CU_LAYERS 0x0000FFFF #define INTERNAL_LAYERS 0x00007FFE /* Bits layers internes */ #define EXTERNAL_LAYERS 0x00008001 /* Flags pour les couches cuivres */ /* numero des couches particulieres */ #define LAYER_CUIVRE_N 0 #define CUIVRE_N 0 #define LAYER_N_2 1 /* Numero layer 2 */ #define LAYER_N_3 2 /* Numero layer 3 */ #define LAYER_N_4 3 /* Numero layer 4 */ #define LAYER_N_5 4 /* Numero layer 5 */ #define LAYER_N_6 5 /* Numero layer 6 */ #define LAYER_N_7 6 /* Numero layer 7 */ #define LAYER_N_8 7 /* Numero layer 8 */ #define LAYER_N_9 8 /* Numero layer 9 */ #define LAYER_N_10 9 /* Numero layer 10 */ #define LAYER_N_11 10 /* Numero layer 11 */ #define LAYER_N_12 11 /* Numero layer 12 */ #define LAYER_N_13 12 /* Numero layer 13 */ #define LAYER_N_14 13 /* Numero layer 14 */ #define LAYER_N_15 14 /* Numero layer 15 */ #define LAYER_CMP_N 15 #define CMP_N 15 #define NB_COPPER_LAYERS (CMP_N + 1) #define FIRST_NO_COPPER_LAYER 16 #define ADHESIVE_N_CU 16 #define ADHESIVE_N_CMP 17 #define SOLDERPASTE_N_CU 18 #define SOLDERPASTE_N_CMP 19 #define SILKSCREEN_N_CU 20 #define SILKSCREEN_N_CMP 21 #define SOLDERMASK_N_CU 22 #define SOLDERMASK_N_CMP 23 #define DRAW_N 24 #define COMMENT_N 25 #define ECO1_N 26 #define ECO2_N 27 #define EDGE_N 28 #define LAST_NO_COPPER_LAYER 28 #define NB_LAYERS (EDGE_N + 1) #define LAYER_COUNT 32 /* Forme des segments (pistes, contours ..) ( parametre .shape ) */ enum Track_Shapes { S_SEGMENT = 0, /* segment rectiligne */ S_RECT, /* segment forme rect (i.e. bouts non arrondis) */ S_ARC, /* segment en arc de cercle (bouts arrondis)*/ S_CIRCLE, /* segment en cercle (anneau)*/ S_ARC_RECT, /* segment en arc de cercle (bouts droits) (GERBER)*/ S_SPOT_OVALE, /* spot ovale (for GERBER)*/ S_SPOT_CIRCLE, /* spot rond (for GERBER)*/ S_SPOT_RECT, /* spot rect (for GERBER)*/ S_POLYGON /* polygon shape */ }; /* Forward declaration */ class MODULE; class EQUIPOT; class MARQUEUR; class TRACK; class D_PAD; struct CHEVELU; class Ki_PageDescr; class DrawBlockStruct; // Class for handle current printed board design settings #define HIST0RY_NUMBER 8 class EDA_BoardDesignSettings { public: int m_CopperLayerCount; // Number of copper layers for this design int m_ViaDrill; // via drill (for the entire board) int m_CurrentViaSize; // Current via size int m_ViaSizeHistory[HIST0RY_NUMBER]; // Last HIST0RY_NUMBER used via sizes int m_CurrentViaType; // via type (BLIND, TROUGHT ...), bits 1 and 2 (not 0 and 1) int m_CurrentTrackWidth; // current track width int m_TrackWidhtHistory[HIST0RY_NUMBER]; // Last HIST0RY_NUMBER used track widths int m_DrawSegmentWidth; // current graphic line width (not EDGE layer) int m_EdgeSegmentWidth; // current graphic line width (EDGE layer only) int m_PcbTextWidth; // current Pcb (not module) Text width wxSize m_PcbTextSize; // current Pcb (not module) Text size int m_TrackClearence; // track to track and track to pads clearance int m_ZoneClearence; // zone to track and zone to pads clearance int m_MaskMargin; // Solder mask margin // Color options for screen display of the Printed Board: int m_PcbGridColor; // Grid color int m_LayerColor[32]; // Layer colors (tracks and graphic items) int m_ViaColor[4]; // Via color (depending on is type) int m_ModuleTextCMPColor; // Text module color for modules on the COMPONENT layer int m_ModuleTextCUColor; // Text module color for modules on the COPPER layer int m_ModuleTextNOVColor; // Text module color for "invisible" texts (must be BLACK if really not displayed) int m_AnchorColor; // Anchor color for modules and texts int m_PadCUColor; // Pad color for the COPPER side of the pad int m_PadCMPColor; // Pad color for the COMPONENT side of the pad // Pad color for the pads of both sides is m_PadCUColor OR m_PadCMPColor (in terms of colors) int m_RatsnestColor; // Ratsnest color public: EDA_BoardDesignSettings(); /** * Function GetVisibleLayers * returns a bit-map of all the layers that are visible. * @return int - the visible layers in bit-mapped form. */ int GetVisibleLayers() const; }; // Values for m_DisplayViaMode member: enum DisplayViaMode { VIA_HOLE_NOT_SHOW = 0, VIA_SPECIAL_HOLE_SHOW, ALL_VIA_HOLE_SHOW, OPT_VIA_HOLE_END }; class BOARD : public BOARD_ITEM { public: WinEDA_BasePcbFrame* m_PcbFrame; // Window de visualisation EDA_Rect m_BoundaryBox; // Limites d'encadrement du PCB int m_Unused; int m_Status_Pcb; // Mot d'etat: Bit 1 = Chevelu calcule EDA_BoardDesignSettings* m_BoardSettings; // Link to current design settings int m_NbNets; // Nombre de nets (equipotentielles) int m_NbNodes; // nombre de pads connectes int m_NbLinks; // nombre de chevelus int m_NbLoclinks; // nombre de chevelus dans Local ratsnest // minimal de pistes a tracer int m_NbNoconnect; // nombre de chevelus actifs int m_NbSegmTrack; // nombre d'elements de type segments de piste int m_NbSegmZone; // nombre d'elements de type segments de zone BOARD_ITEM* m_Drawings; // linked list of lines & texts MODULE* m_Modules; // linked list of MODULEs EQUIPOT* m_Equipots; // linked list of nets TRACK* m_Track; // linked list of TRACKs and SEGVIAs SEGZONE* m_Zone; // linked list of SEGZONEs D_PAD** m_Pads; // pointeur liste d'acces aux pads int m_NbPads; // nombre total de pads CHEVELU* m_Ratsnest; // pointeur liste des chevelus CHEVELU* m_LocalRatsnest; // pointeur liste des chevelus d'un module EDGE_ZONE* m_CurrentLimitZone; /* pointeur sur la liste des segments * de delimitation de la zone en cours de trace */ BOARD( EDA_BaseStruct* StructFather, WinEDA_BasePcbFrame* frame ); ~BOARD(); /* supprime du chainage la structure Struct */ void UnLink(); /* Routines de calcul des nombres de segments pistes et zones */ int GetNumSegmTrack(); int GetNumSegmZone(); int GetNumNoconnect(); // retourne le nombre de connexions manquantes int GetNumRatsnests(); // retourne le nombre de chevelus int GetNumNodes(); // retourne le nombre de pads a netcode > 0 // Calcul du rectangle d'encadrement: bool ComputeBoundaryBox(); /** * Function Display_Infos * has knowledge about the frame and how and where to put status information * about this object into the frame's message panel. * Is virtual from EDA_BaseStruct. * @param frame A WinEDA_DrawFrame in which to print status information. */ void Display_Infos( WinEDA_DrawFrame* frame ); /** * Function Visit * may be re-implemented for each derived class in order to handle * all the types given by its member data. Implementations should call * inspector->Inspect() on types in scanTypes[], and may use IterateForward() * to do so on lists of such data. * @param inspector An INSPECTOR instance to use in the inspection. * @param testData Arbitrary data used by the inspector. * @param scanTypes Which KICAD_T types are of interest and the order * is significant too, terminated by EOT. * @return SEARCH_RESULT - SEARCH_QUIT if the Iterator is to stop the scan, * else SCAN_CONTINUE, and determined by the inspector. */ SEARCH_RESULT Visit( INSPECTOR* inspector, const void* testData, const KICAD_T scanTypes[] ); /** * Function FindPadOrModule * searches for either a pad or module, giving precedence to pads. * Any Pad or Module on the desired layer that HitTest()s true will be * returned, otherwise any visible Pad or Module on any other layer. * The provided layer must be visible. * @param refPos The wxPoint to hit-test. * @return BOARD_ITEM* - if a direct hit, else NULL. */ // BOARD_ITEM* FindPadOrModule( const wxPoint& refPos, int layer ); /** * Function FindNet * searches for a net with the given netcode. * @param aNetcode A netcode to search for. * @return EQUIPOT* - the net or NULL if not found. */ EQUIPOT* FindNet( int aNetcode ) const; /** * Function GetClass * returns the class name. * @return wxString */ wxString GetClass() const { return wxT( "BOARD" ); } #if defined(DEBUG) /** * Function Show * is used to output the object tree, currently for debugging only. * @param nestLevel An aid to prettier tree indenting, and is the level * of nesting of this object within the overall tree. * @param os The ostream& to output to. */ void Show( int nestLevel, std::ostream& os ); #endif }; /* Description d'un ecran */ class PCB_SCREEN : public BASE_SCREEN { public: int m_Active_Layer; /* ref couche active */ int m_Route_Layer_TOP; /* ref couches actives */ int m_Route_Layer_BOTTOM; /* pour placement vias et routage 2 couches */ public: PCB_SCREEN( int idscreen ); ~PCB_SCREEN(); PCB_SCREEN* Next() { return (PCB_SCREEN*) Pnext; } void Init(); void SetNextZoom(); void SetPreviousZoom(); void SetLastZoom(); /** * Function GetCurItem * returns the currently selected BOARD_ITEM, overriding BASE_SCREEN::GetCurItem(). * @return BOARD_ITEM* - the one selected, or NULL. */ BOARD_ITEM* GetCurItem() const { return (BOARD_ITEM*) BASE_SCREEN::GetCurItem(); } }; /***************************/ /* Description des Modules */ /***************************/ #include "class_pad.h" /* Description des Pastilles :*/ #include "class_edge_mod.h" #include "class_text_mod.h" #include "class_module.h" #include "class_equipot.h" /***********************************/ /* Description des elements du PCB */ /***********************************/ class DRAWSEGMENT : public BOARD_ITEM { public: int m_Width; // 0 = line, > 0 = tracks, bus ... wxPoint m_Start; // Line start point wxPoint m_End; // Line end point int m_Shape; // forme: Segment , Cercle.. int m_Type; // numero de sous type ( cotation.. ) int m_Angle; // pour les arcs: "longueur" de l'arc en 1/10 deg public: DRAWSEGMENT( BOARD_ITEM* StructFather, KICAD_T idtype = TYPEDRAWSEGMENT ); ~DRAWSEGMENT(); // Read/write data bool WriteDrawSegmentDescr( FILE* File ); bool ReadDrawSegmentDescr( FILE* File, int* LineNum ); /* supprime du chainage la structure Struct */ void UnLink(); void Copy( DRAWSEGMENT* source ); /** * Function Display_Infos * has knowledge about the frame and how and where to put status information * about this object into the frame's message panel. * Is virtual from EDA_BaseStruct. * @param frame A WinEDA_BasePcbFrame in which to print status information. */ void Display_Infos( WinEDA_DrawFrame* frame ); /** * Function HitTest * tests if the given wxPoint is within the bounds of this object. * @param ref_pos A wxPoint to test * @return bool - true if a hit, else false */ bool HitTest( const wxPoint& ref_pos ); /** * Function GetClass * returns the class name. * @return wxString */ wxString GetClass() const { return wxT("DRAWSEGMENT"); } }; #include "class_pcb_text.h" #include "class_cotation.h" #include "class_mire.h" #include "class_track.h" /*******************/ /* class EDGE_ZONE */ /*******************/ class EDGE_ZONE : public DRAWSEGMENT { public: EDGE_ZONE( BOARD_ITEM* StructFather ); EDGE_ZONE( const EDGE_ZONE& edgezone ); ~EDGE_ZONE(); }; /************************************/ /* Gestion des marqueurs sur le PCB */ /************************************/ class MARQUEUR : public BOARD_ITEM { /* Description d'un marqueur */ public: wxPoint m_Pos; char* m_Bitmap; /* Shape (bitmap) */ int m_Type; int m_Color; /* couleur */ wxString m_Diag; /* Associated text (comment) */ public: MARQUEUR( BOARD_ITEM* StructFather ); ~MARQUEUR(); void UnLink(); void Draw( WinEDA_DrawPanel* panel, wxDC* DC, int DrawMode ); }; class DISPLAY_OPTIONS { public: bool DisplayPadFill; bool DisplayPadNum; bool DisplayPadNoConn; bool DisplayPadIsol; int DisplayModEdge; int DisplayModText; bool DisplayPcbTrackFill; /* FALSE = sketch , TRUE = filled */ bool DisplayTrackIsol; int m_DisplayViaMode; /* 0 do not show via hole, * 1 show via hole for non default value * 2 show all via hole */ bool DisplayPolarCood; bool DisplayZones; bool Show_Modules_Cmp; bool Show_Modules_Cu; int DisplayDrawItems; bool ContrastModeDisplay; public: DISPLAY_OPTIONS(); }; #endif /* PCBSTRUCT_H */