/***********************************************/
/* Routine de Generation du fichier de percage */
/***********************************************/
#include "fctsys.h"
#include "gr_basic.h"
#include "common.h"
#include "plot_common.h"
#include "trigo.h"
#include "pcbnew.h"
#include "pcbplot.h"
#include "autorout.h"
#include "macros.h"
#include "protos.h"
#include "wx/defs.h"
/*
* Generation du fichier de percage en format EXCELLON
* Variantes supportees:
* - Decimal : coord flottantes en pouces
* - Metric : coord entieres en 1/10000 mm
* format "Trailling Zero" ( TZ )
*
* On peut aussi generer le plan de percage en format HPGL ou PS
*/
/* Routines importees */
class FORET
{
public:
int m_TotalCount;
int m_OvalCount;
int m_Diameter;
};
/* drill precision format */
class DrillPrecision
{
public:
int m_lhs;
int m_rhs;
public:
DrillPrecision( int l, int r ) { m_lhs = l; m_rhs = r; }
};
/* zeros format */
enum zeros_fmt {
DECIMAL_FORMAT,
SUPPRESS_LEADING,
SUPPRESS_TRAILING,
KEEP_ZEROS
};
/* Routines Locales */
static void Write_End_Of_File_Drill();
static void PlotDrillSymbol( const wxPoint& position, int diametre, int num_forme, int format );
static void PlotOvalDrillSymbol( const wxPoint& position,
const wxSize& size,
int orient,
int format );
/* Variables locales : */
static int DrillToolsCount; /* Nombre de forets a utiliser */
static float conv_unit; /* coeff de conversion des unites drill / pcb */
static bool Unit_Drill_is_Inch = TRUE; /* INCH,LZ (2:4) */
static int s_Zeros_Format = DECIMAL_FORMAT;
static DrillPrecision s_Precision( 2, 4 );
static bool DrillOriginIsAuxAxis; // Axis selection (main / auxiliary) for Drill Origin coordinates
static wxPoint File_Drill_Offset; /* Offset des coord de percage pour le fichier généré */
static bool Minimal = false;
static bool Mirror = true;
// Keywords for read and write config
#define ZerosFormatKey wxT( "DrillZerosFormat" )
#define LeftPrecisionKey wxT( "DrillLeftPrecisionOpt" )
#define RightPrecisionKey wxT( "DrillRightPrecisionOpt" )
#define MirrorKey wxT( "DrillMirrorYOpt" )
#define MinimalKey wxT( "DrillMinHeader" )
#define UnitDrillInchKey wxT( "DrillUnit" )
#define DrillOriginIsAuxAxisKey wxT( "DrillAuxAxis" )
/****************************************/
/* Dialog box for drill file generation */
/****************************************/
enum id_drill {
ID_CREATE_DRILL_FILES = 1370,
ID_CLOSE_DRILL,
ID_SEL_DRILL_UNITS,
ID_SEL_DRILL_SHEET,
ID_SEL_DRILL_REPORT,
ID_SEL_ZEROS_FMT,
ID_SEL_PRECISION
};
class WinEDA_DrillFrame : public wxDialog
{
WinEDA_PcbFrame* m_Parent;
wxRadioBox* m_Choice_Drill_Map;
wxRadioBox* m_Choice_Drill_Report;
wxRadioBox* m_Choice_Unit;
wxRadioBox* m_Choice_Drill_Offset;
WinEDA_EnterText* m_EnterFileNameDrill;
WinEDA_ValueCtrl* m_ViaDrillCtrl;
WinEDA_ValueCtrl* m_PenSpeed;
WinEDA_ValueCtrl* m_PenNum;
wxCheckBox* m_Check_Mirror;
wxCheckBox* m_Check_Minimal;
wxRadioBox* m_Choice_Zeros_Format;
wxRadioBox* m_Choice_Precision;
// Constructor and destructor
public:
WinEDA_DrillFrame( WinEDA_PcbFrame* parent );
~WinEDA_DrillFrame() { };
private:
void OnQuit( wxCommandEvent& event );
void SetParams();
void GenDrillFiles( wxCommandEvent& event );
void GenDrillMap( int format );
void UpdatePrecisionOptions( wxCommandEvent& event );
void UpdateConfig();
int Plot_Drill_PcbMap( FORET* buffer, int format );
void GenDrillReport();
int Gen_Liste_Forets( FORET* buffer, bool print_header );
int Gen_Drill_File_EXCELLON( FORET* buffer );
void Gen_Line_EXCELLON( char* line, float x, float y );
void Init_Drill();
DECLARE_EVENT_TABLE()
};
BEGIN_EVENT_TABLE( WinEDA_DrillFrame, wxDialog )
EVT_BUTTON( ID_CLOSE_DRILL, WinEDA_DrillFrame::OnQuit )
EVT_BUTTON( ID_CREATE_DRILL_FILES, WinEDA_DrillFrame::GenDrillFiles )
EVT_RADIOBOX( ID_SEL_DRILL_UNITS, WinEDA_DrillFrame::UpdatePrecisionOptions )
EVT_RADIOBOX( ID_SEL_ZEROS_FMT, WinEDA_DrillFrame::UpdatePrecisionOptions )
END_EVENT_TABLE()
#define H_SIZE 550
#define V_SIZE 250
/*************************************************************************/
WinEDA_DrillFrame::WinEDA_DrillFrame( WinEDA_PcbFrame* parent ) :
wxDialog( parent, -1, _( "Drill tools" ), wxDefaultPosition, wxSize( H_SIZE, V_SIZE ),
DIALOG_STYLE )
/*************************************************************************/
{
m_Parent = parent;
SetFont( *g_DialogFont );
SetReturnCode( 1 );
wxBoxSizer* MainBoxSizer = new wxBoxSizer( wxHORIZONTAL );
SetSizer( MainBoxSizer );
wxBoxSizer* LeftBoxSizer = new wxBoxSizer( wxVERTICAL );
wxBoxSizer* MiddleBoxSizer = new wxBoxSizer( wxVERTICAL );
wxBoxSizer* RightBoxSizer = new wxBoxSizer( wxVERTICAL );
MainBoxSizer->Add( LeftBoxSizer, 0, wxGROW | wxALL, 5 );
MainBoxSizer->Add( MiddleBoxSizer, 0, wxGROW | wxALL, 5 );
MainBoxSizer->Add( RightBoxSizer, 0, wxALIGN_CENTER_VERTICAL | wxALL, 5 );
/* first column, NC drill options */
wxString choice_unit_msg[] =
{ _( "millimeters" ), _( "inches" ) };
m_Choice_Unit = new wxRadioBox( this, ID_SEL_DRILL_UNITS,
_( "Drill Units:" ),
wxDefaultPosition, wxSize( -1, -1 ),
2, choice_unit_msg, 1, wxRA_SPECIFY_COLS );
if( Unit_Drill_is_Inch )
m_Choice_Unit->SetSelection( 1 );
LeftBoxSizer->Add( m_Choice_Unit, 0, wxGROW | wxALL, 5 );
wxString choice_zeros_format_msg[] = {
_( "decimal format" ),
_( "suppress leading zeros" ), _( "suppress trailing zeros" ), _( "keep zeros" )
};
m_Choice_Zeros_Format = new wxRadioBox( this, ID_SEL_ZEROS_FMT,
_( "Zeros Format" ),
wxDefaultPosition, wxSize( -1, -1 ),
4, choice_zeros_format_msg, 1, wxRA_SPECIFY_COLS );
m_Choice_Zeros_Format->SetSelection( s_Zeros_Format );
LeftBoxSizer->Add( m_Choice_Zeros_Format, 0, wxGROW | wxALL, 5 );
wxString* choice_precision_msg;
wxString choice_precision_inch_msg[] = { _( "2:3" ), _( "2:4" ) };
wxString choice_precision_metric_msg[] = { _( "3:2" ), _( "3:3" ) };
if( Unit_Drill_is_Inch )
choice_precision_msg = choice_precision_inch_msg;
else
choice_precision_msg = choice_precision_metric_msg;
m_Choice_Precision = new wxRadioBox( this, ID_SEL_PRECISION,
_( "Precision" ),
wxDefaultPosition, wxSize( -1, -1 ),
2, choice_precision_msg, 1, wxRA_SPECIFY_COLS );
LeftBoxSizer->Add( m_Choice_Precision, 0, wxGROW | wxALL, 5 );
wxString ps;
ps << s_Precision.m_lhs << wxT( ":" ) << s_Precision.m_rhs;
m_Choice_Precision->SetStringSelection( ps );
if( s_Zeros_Format==DECIMAL_FORMAT )
m_Choice_Precision->Enable( false );
wxString choice_drill_offset_msg[] =
{ _( "absolute" ), _( "auxiliary axis" ) };
m_Choice_Drill_Offset = new wxRadioBox( this, ID_SEL_DRILL_SHEET,
_( "Drill Origin:" ),
wxDefaultPosition, wxSize( -1, -1 ),
2, choice_drill_offset_msg, 1, wxRA_SPECIFY_COLS );
if( DrillOriginIsAuxAxis )
m_Choice_Drill_Offset->SetSelection( 1 );
LeftBoxSizer->Add( m_Choice_Drill_Offset, 0, wxGROW | wxALL, 5 );
/* second column */
wxString choice_drill_map_msg[] =
{ _( "None" ), _( "drill sheet (HPGL)" ), _( "drill sheet (PostScript)" ) };
m_Choice_Drill_Map = new wxRadioBox( this, ID_SEL_DRILL_SHEET,
_( "Drill Sheet:" ),
wxDefaultPosition, wxSize( -1, -1 ),
3, choice_drill_map_msg, 1, wxRA_SPECIFY_COLS );
MiddleBoxSizer->Add( m_Choice_Drill_Map, 0, wxGROW | wxALL, 5 );
wxString choice_drill_report_msg[] =
{ _( "None" ), _( "Drill report" ) };
m_Choice_Drill_Report = new wxRadioBox( this, ID_SEL_DRILL_REPORT,
_( "Drill Report:" ),
wxDefaultPosition, wxSize( -1, -1 ),
2, choice_drill_report_msg, 1, wxRA_SPECIFY_COLS );
MiddleBoxSizer->Add( m_Choice_Drill_Report, 0, wxGROW | wxALL, 5 );
m_ViaDrillCtrl = new WinEDA_ValueCtrl( this, _(
"Via Drill" ),
g_DesignSettings.m_ViaDrill, g_UnitMetric,
MiddleBoxSizer,
m_Parent->m_InternalUnits );
m_PenNum = new WinEDA_ValueCtrl( this, _( "Pen Number" ),
g_HPGL_Pen_Num, 2, MiddleBoxSizer, 1 );
m_PenSpeed = new WinEDA_ValueCtrl( this, _( "Speed (cm/s)" ),
g_HPGL_Pen_Speed, CENTIMETRE, MiddleBoxSizer, 1 );
m_Check_Mirror = new wxCheckBox( this, -1, _( "mirror y axis" ) );
m_Check_Mirror->SetValue( Mirror );
MiddleBoxSizer->Add( m_Check_Mirror, 0, wxGROW | wxALL, 5 );
m_Check_Minimal = new wxCheckBox( this, -1, _( "minimal header" ) );
m_Check_Minimal->SetValue( Minimal );
MiddleBoxSizer->Add( m_Check_Minimal, 0, wxGROW | wxALL, 5 );
/* third column, buttons */
wxButton* Button = new wxButton( this, ID_CREATE_DRILL_FILES,
_( "&Execute" ) );
Button->SetForegroundColour( *wxRED );
RightBoxSizer->Add( Button, 0, wxGROW | wxALL, 5 );
Button = new wxButton( this, ID_CLOSE_DRILL, _( "&Close" ) );
Button->SetForegroundColour( *wxBLUE );
RightBoxSizer->Add( Button, 0, wxGROW | wxALL, 5 );
GetSizer()->Fit( this );
GetSizer()->SetSizeHints( this );
Centre();
}
/**************************************/
void WinEDA_DrillFrame::SetParams()
/**************************************/
{
Unit_Drill_is_Inch = (m_Choice_Unit->GetSelection() == 0) ? FALSE : TRUE;
Minimal = m_Check_Minimal->IsChecked();
Mirror = m_Check_Mirror->IsChecked();
s_Zeros_Format = m_Choice_Zeros_Format->GetSelection();
DrillOriginIsAuxAxis = m_Choice_Drill_Offset->GetSelection();
g_DesignSettings.m_ViaDrill = m_ViaDrillCtrl->GetValue();
Unit_Drill_is_Inch = m_Choice_Unit->GetSelection();
g_HPGL_Pen_Speed = m_PenSpeed->GetValue();
g_HPGL_Pen_Num = m_PenNum->GetValue();
if( m_Choice_Drill_Offset->GetSelection() == 0 )
File_Drill_Offset = wxPoint( 0, 0 );
else
File_Drill_Offset = m_Parent->m_Auxiliary_Axis_Position;
/* get precision from radio box strings (this just makes it easier to
* change options later)*/
wxString ps = m_Choice_Precision->GetStringSelection();
wxString l = ps.substr( 0, 1 );
wxString r = ps.substr( 2, 1 );
l.ToLong( (long*) &s_Precision.m_lhs );
r.ToLong( (long*) &s_Precision.m_rhs );
}
/*****************************************************************/
void WinEDA_PcbFrame::InstallDrillFrame( wxCommandEvent& event )
/*****************************************************************/
/* This function displays and deletes the dialog frame for drill tools
*/
{
wxConfig* Config = m_Parent->m_EDA_Config;
if( Config )
{
Config->Read( ZerosFormatKey, &s_Zeros_Format );
Config->Read( LeftPrecisionKey, &s_Precision.m_lhs );
Config->Read( RightPrecisionKey, &s_Precision.m_rhs );
Config->Read( MirrorKey, &Mirror );
Config->Read( MinimalKey, &Minimal );
Config->Read( UnitDrillInchKey, &Unit_Drill_is_Inch );
Config->Read( DrillOriginIsAuxAxisKey, &DrillOriginIsAuxAxis );
}
WinEDA_DrillFrame* frame = new WinEDA_DrillFrame( this );
frame->ShowModal(); frame->Destroy();
}
/******************************************/
void WinEDA_DrillFrame::UpdateConfig()
/******************************************/
/* Save drill options: */
{
SetParams();
wxConfig* Config = m_Parent->m_Parent->m_EDA_Config;
if( Config )
{
Config->Write( ZerosFormatKey, s_Zeros_Format );
Config->Write( LeftPrecisionKey, s_Precision.m_lhs );
Config->Write( RightPrecisionKey, s_Precision.m_rhs );
Config->Write( MirrorKey, Mirror );
Config->Write( MinimalKey, Minimal );
Config->Write( UnitDrillInchKey, Unit_Drill_is_Inch );
Config->Write( DrillOriginIsAuxAxisKey, DrillOriginIsAuxAxis );
}
}
/****************************************************************/
void WinEDA_DrillFrame::OnQuit( wxCommandEvent& WXUNUSED (event) )
/****************************************************************/
{
UpdateConfig(); /* Save drill options: */
Close( true ); // true is to force the frame to close
}
/*************************************************************/
void WinEDA_DrillFrame::GenDrillFiles( wxCommandEvent& event )
/*************************************************************/
{
wxString FullFileName, Mask( wxT( "*" ) ), Ext( wxT( ".drl" ) );
int ii;
wxString msg;
UpdateConfig(); /* set params and Save drill options */
m_Parent->MsgPanel->EraseMsgBox();
/* Calcul des echelles de conversion */
conv_unit = 0.0001; /* unites = INCHES */
if( !Unit_Drill_is_Inch )
conv_unit = 0.000254; /* unites = mm */
/* Init nom fichier */
FullFileName = m_Parent->m_CurrentScreen->m_FileName;
ChangeFileNameExt( FullFileName, Ext );
Mask += Ext;
FullFileName = EDA_FileSelector( _( "Drill file" ),
wxEmptyString, /* Chemin par defaut */
FullFileName, /* nom fichier par defaut */
Ext, /* extension par defaut */
Mask, /* Masque d'affichage */
this,
wxFD_SAVE,
TRUE
);
if( FullFileName != wxEmptyString )
{
dest = wxFopen( FullFileName, wxT( "w" ) );
if( dest == 0 )
{
msg = _( "Unable to create file " ) + FullFileName;
DisplayError( this, msg );
EndModal( 0 );
return;
}
/* Init : */
Affiche_1_Parametre( m_Parent, 0, _( "File" ), FullFileName, BLUE );
Init_Drill();
ii = Gen_Liste_Forets( (FORET*) adr_lowmem, TRUE );
msg.Printf( wxT( "%d" ), ii );
Affiche_1_Parametre( m_Parent, 30, _( "Tools" ), msg, BROWN );
ii = Gen_Drill_File_EXCELLON( (FORET*) adr_lowmem );
msg.Printf( wxT( "%d" ), ii );
Affiche_1_Parametre( m_Parent, 45, _( "Drill" ), msg, GREEN );
Write_End_Of_File_Drill();
}
switch( m_Choice_Drill_Map->GetSelection() )
{
case 0:
break;
case 1:
GenDrillMap( PLOT_FORMAT_HPGL );
break;
case 2:
GenDrillMap( PLOT_FORMAT_POST );
break;
}
if( m_Choice_Drill_Report->GetSelection() > 0 )
GenDrillReport();
EndModal( 0 );
}
/********************************************************************/
void WinEDA_DrillFrame::UpdatePrecisionOptions( wxCommandEvent& event )
/********************************************************************/
{
if( m_Choice_Unit->GetSelection()==1 )
{ /* inch options */
m_Choice_Precision->SetString( 0, _( "2:3" ) );
m_Choice_Precision->SetString( 1, _( "2:4" ) );
}
else
{
/* metric options */
m_Choice_Precision->SetString( 0, _( "3:2" ) );
m_Choice_Precision->SetString( 1, _( "3:3" ) );
}
if( m_Choice_Zeros_Format->GetSelection()==DECIMAL_FORMAT )
m_Choice_Precision->Enable( false );
else
m_Choice_Precision->Enable( true );
}
/***************************************************************/
int WinEDA_DrillFrame::Gen_Drill_File_EXCELLON( FORET* buffer )
/***************************************************************/
/* Create the drill file in EXECELLON format
* Return hole count
* buffer: Drill tools list
*/
{
FORET* foret;
TRACK* pt_piste;
D_PAD* pt_pad;
MODULE* Module;
int ii, diam, nb_trous;
int x0, y0, xf, yf, xc, yc;
float xt, yt;
char line[1024];
/* Create the pad drill list : */
nb_trous = 0;
/* Examen de la liste des forets */
for( ii = 0, foret = buffer; ii < DrillToolsCount; ii++, foret++ )
{
sprintf( line, "T%d\n", ii + 1 ); fputs( line, dest );
/* Read the via list */
{
pt_piste = m_Parent->m_Pcb->m_Track;
for( ; pt_piste != NULL; pt_piste = (TRACK*) pt_piste->Pnext )
{
if( pt_piste->Type() != TYPEVIA )
continue;
if( pt_piste->m_Drill == 0 )
continue;
int via_drill = ( pt_piste->m_Drill <
0 ) ? g_DesignSettings.m_ViaDrill : pt_piste->m_Drill;
if( foret->m_Diameter != via_drill )
continue;
x0 = pt_piste->m_Start.x - File_Drill_Offset.x;
y0 = pt_piste->m_Start.y - File_Drill_Offset.y;
//
if( !Mirror )
y0 *= -1;
xt = float (x0) * conv_unit; yt = float (y0) * conv_unit;
if( Unit_Drill_is_Inch )
{
Gen_Line_EXCELLON( line, xt, yt );
}
//
else
{
/* metric 3:3 */
Gen_Line_EXCELLON( line, xt * 10, yt * 10 );
}
// si les flottants sont ecrits avec , au lieu de .
// conversion , -> . necessaire !
to_point( line );
fputs( line, dest );
nb_trous++;
}
}
/* Read pad list and create Drill infos for round holes only: */
Module = m_Parent->m_Pcb->m_Modules;
for( ; Module != NULL; Module = (MODULE*) Module->Pnext )
{
/* Examen des pastilles */
pt_pad = (D_PAD*) Module->m_Pads;
for( ; pt_pad != NULL; pt_pad = (D_PAD*) pt_pad->Pnext )
{
if( pt_pad->m_DrillShape != CIRCLE )
continue;
diam = pt_pad->m_Drill.x;
if( diam == 0 )
continue;
if( diam != foret->m_Diameter )
continue;
/* Compute the hole coordinates: */
x0 = pt_pad->m_Pos.x - File_Drill_Offset.x;
y0 = pt_pad->m_Pos.y - File_Drill_Offset.y;
//
if( !Mirror )
y0 *= -1;
xt = float (x0) * conv_unit; yt = float (y0) * conv_unit;
if( Unit_Drill_is_Inch )
Gen_Line_EXCELLON( line, xt, yt );
else
Gen_Line_EXCELLON( line, xt * 10, yt * 10 );
to_point( line ); // Internationalization compensation (, to . for floats)
fputs( line, dest );
nb_trous++;
}
/* Fin examen 1 module */
}
/* Fin 1 passe de foret */
/* Read pad list and create Drill infos for oblong holes only: */
Module = m_Parent->m_Pcb->m_Modules;
for( ; Module != NULL; Module = (MODULE*) Module->Pnext )
{
/* Examen des pastilles */
pt_pad = (D_PAD*) Module->m_Pads;
for( ; pt_pad != NULL; pt_pad = (D_PAD*) pt_pad->Pnext )
{
if( pt_pad->m_DrillShape != OVALE )
continue;
diam = MIN( pt_pad->m_Drill.x, pt_pad->m_Drill.y );
if( diam == 0 )
continue;
if( diam != foret->m_Diameter )
continue;
/* Compute the hole coordinates: */
xc = x0 = xf = pt_pad->m_Pos.x - File_Drill_Offset.x;
yc = y0 = yf = pt_pad->m_Pos.y - File_Drill_Offset.y;
/* Compute the start and end coordinates for the shape */
if( pt_pad->m_Drill.x < pt_pad->m_Drill.y )
{
int delta = (pt_pad->m_Drill.y - pt_pad->m_Drill.x) / 2;
y0 -= delta; yf += delta;
}
else
{
int delta = (pt_pad->m_Drill.x - pt_pad->m_Drill.y) / 2;
x0 -= delta; xf += delta;
}
RotatePoint( &x0, &y0, xc, yc, pt_pad->m_Orient );
RotatePoint( &xf, &yf, xc, yc, pt_pad->m_Orient );
//
if( !Mirror )
{
y0 *= -1; yf *= -1;
}
// sprintf(line,"T%d\n",ii+1); fputs(line,dest);
xt = float (x0) * conv_unit; yt = float (y0) * conv_unit;
if( Unit_Drill_is_Inch )
Gen_Line_EXCELLON( line, xt, yt );
else
Gen_Line_EXCELLON( line, xt * 10, yt * 10 );
to_point( line );
/* remove the '\n' from end of line: */
for( int kk = 0; line[kk] != 0; kk++ )
if( line[kk] == '\n' || line[kk] =='\r' )
line[kk] = 0;
fputs( line, dest );
fputs( "G85", dest );
xt = float (xf) * conv_unit; yt = float (yf) * conv_unit;
if( Unit_Drill_is_Inch )
Gen_Line_EXCELLON( line, xt, yt );
else
Gen_Line_EXCELLON( line, xt * 10, yt * 10 );
to_point( line ); fputs( line, dest );
fputs( "G05\n", dest );
nb_trous++;
}
/* Fin examen 1 module */
}
/* fin analyse des trous de modules pour le foret en cours*/
}
/* fin analyse des forets */
return nb_trous;
}
/**********************************************************************/
void WinEDA_DrillFrame::Gen_Line_EXCELLON( char* line, float x, float y )
/**********************************************************************/
{
wxString xs, ys;
int xpad = s_Precision.m_lhs + s_Precision.m_rhs;
int ypad = xpad;
/* I need to come up with an algorithm that handles any lhs:rhs format.*/
/* one idea is to take more inputs for xpad/ypad when metric is used. */
switch( s_Zeros_Format )
{
default:
case DECIMAL_FORMAT:
sprintf( line, "X%.3fY%.3f\n", x, y );
break;
case SUPPRESS_LEADING: /* that should work now */
for( int i = 0; i< s_Precision.m_rhs; i++ )
{
x *= 10; y *= 10;
}
sprintf( line, "X%dY%d\n", (int) round( x ), (int) round( y ) );
break;
case SUPPRESS_TRAILING:
{
for( int i = 0; i< s_Precision.m_rhs; i++ )
{
x *= 10; y *= 10;
}
if( x<0 )
xpad++;
if( y<0 )
ypad++;
xs.Printf( wxT( "%0*d" ), xpad, (int) round( x ) );
ys.Printf( wxT( "%0*d" ), ypad, (int) round( y ) );
size_t j = xs.Len() - 1;
while( xs[j] == '0' && j )
xs.Truncate( j-- );
j = ys.Len() - 1;
while( ys[j] == '0' && j )
ys.Truncate( j-- );
sprintf( line, "X%sY%s\n", CONV_TO_UTF8( xs ), CONV_TO_UTF8( ys ) );
break;
}
case KEEP_ZEROS:
for( int i = 0; i< s_Precision.m_rhs; i++ )
{
x *= 10; y *= 10;
}
if( x<0 )
xpad++;
if( y<0 )
ypad++;
xs.Printf( wxT( "%0*d" ), xpad, (int) round( x ) );
ys.Printf( wxT( "%0*d" ), ypad, (int) round( y ) );
sprintf( line, "X%sY%s\n", CONV_TO_UTF8( xs ), CONV_TO_UTF8( ys ) );
break;
}
;
}
/***************************************************/
FORET* GetOrAddForet( FORET* buffer, int diameter )
/***************************************************/
/* Search the drill tool for the diameter "diameter"
* Create a new one if not found
*/
{
int ii;
FORET* foret;
if( diameter == 0 )
return NULL;
/* Search for an existing tool: */
for( ii = 0, foret = buffer; ii < DrillToolsCount; ii++, foret++ )
{
if( foret->m_Diameter == diameter ) /* found */
return foret;
}
/* No tool found, we must create a new one */
DrillToolsCount++;
foret->m_TotalCount = 0;
foret->m_OvalCount = 0;
foret->m_Diameter = diameter;
return foret;
}
/* Sort function by drill value */
int Sort_by_Drill_Value( void* foret1, void* foret2 )
{
return ( (FORET*) foret1 )->m_Diameter - ( (FORET*) foret2 )->m_Diameter;
}
/*********************************************************************/
int WinEDA_DrillFrame::Gen_Liste_Forets( FORET* buffer, bool print_header )
/**********************************************************************/
/* Etablit la liste des forets de percage, dans l'ordre croissant des
* diametres
* Retourne:
* Nombre de Forets
*
* Mise a jour: DrillToolsCount = nombre de forets differents
* Genere une liste de DrillToolsCount structures FORET a partir de buffer
*/
{
FORET* foret;
D_PAD* pt_pad;
MODULE* Module;
int ii, diam;
char line[1024];
DrillToolsCount = 0; foret = buffer;
/* Create the via tools */
TRACK* pt_piste = m_Parent->m_Pcb->m_Track;
for( ; pt_piste != NULL; pt_piste = (TRACK*) pt_piste->Pnext )
{
if( pt_piste->Type() != TYPEVIA )
continue;
if( pt_piste->m_Drill == 0 )
continue;
int via_drill = g_DesignSettings.m_ViaDrill;
if( pt_piste->m_Drill > 0 ) // Drill value is not the default value
via_drill = pt_piste->m_Drill;
foret = GetOrAddForet( buffer, via_drill );
if( foret )
foret->m_TotalCount++;
}
/* Create the pad tools : */
Module = m_Parent->m_Pcb->m_Modules;
for( ; Module != NULL; Module = (MODULE*) Module->Pnext )
{
/* Examen des pastilles */
pt_pad = (D_PAD*) Module->m_Pads;
for( ; pt_pad != NULL; pt_pad = (D_PAD*) pt_pad->Pnext )
{
if( pt_pad->m_DrillShape == CIRCLE )
diam = pt_pad->m_Drill.x;
else
diam = MIN( pt_pad->m_Drill.x, pt_pad->m_Drill.y );
if( diam == 0 )
continue;
foret = GetOrAddForet( buffer, diam );
if( foret )
{
foret->m_TotalCount++;
if( pt_pad->m_DrillShape == OVALE )
foret->m_OvalCount++;
}
}
/* Fin examen 1 module */
}
/* tri des forets par ordre de diametre croissant */
qsort( buffer, DrillToolsCount, sizeof(FORET),
( int( * ) ( const void*, const void* ) )Sort_by_Drill_Value );
/* Generation de la section liste des outils */
if( print_header )
{
for( ii = 0, foret = (FORET*) buffer; ii < DrillToolsCount; ii++, foret++ )
{
//
if( Unit_Drill_is_Inch ) /* does it need T01, T02 or is T1,T2 ok?*/
sprintf( line, "T%dC%.3f\n", ii + 1,
float (foret->m_Diameter) * conv_unit );
else
sprintf( line, "T%dC%.3f\n", ii + 1,
float (foret->m_Diameter) * conv_unit * 10.0 );
//
to_point( line );
fputs( line, dest );
}
fputs( "%\n", dest );
if( !Minimal )
fputs( "M47\n", dest ); /* Operator message */
fputs( "G05\n", dest ); /* Drill mode */
/* Units : */
if( Unit_Drill_is_Inch && !Minimal )
fputs( "M72\n", dest ); /* M72 = inch mode */
else if( !Minimal )
fputs( "M71\n", dest ); /* M71 = metric mode */
}
return DrillToolsCount;
}
/***************************************/
void WinEDA_DrillFrame::Init_Drill()
/***************************************/
/* Print the DRILL file header */
{
char Line[256];
fputs( "M48\n", dest );
if( !Minimal )
{
DateAndTime( Line );
wxString Title = g_Main_Title + wxT( " " ) + GetBuildVersion();
fprintf( dest, ";DRILL file {%s} date %s\n", CONV_TO_UTF8( Title ), Line );
fputs( ";FORMAT={", dest );
fprintf( dest, "%s / absolute / ",
CONV_TO_UTF8( m_Choice_Precision->GetStringSelection() ) );
fprintf( dest, "%s / ", CONV_TO_UTF8( m_Choice_Unit->GetStringSelection() ) );
fprintf( dest, "%s}\n", CONV_TO_UTF8( m_Choice_Zeros_Format->GetStringSelection() ) );
fputs( "R,T\nVER,1\nFMAT,2\n", dest );
}
if( Unit_Drill_is_Inch )
fputs( "INCH", dest ); // Si unites en INCHES
else
fputs( "METRIC", dest ); // Si unites en mm
switch( s_Zeros_Format )
{
case SUPPRESS_LEADING:
case DECIMAL_FORMAT:
fputs( ",TZ\n", dest );
break;
case SUPPRESS_TRAILING:
fputs( ",LZ\n", dest );
break;
case KEEP_ZEROS:
fputs( ",TZ\n", dest ); // TZ is acceptable when all zeros are kept
break;
}
if( !Minimal )
fputs( "TCST,OFF\nICI,OFF\nATC,ON\n", dest );
}
/*****************************/
void Write_End_Of_File_Drill()
/*****************************/
{
//add if minimal here
fputs( "T0\nM30\n", dest ); fclose( dest );
}
/***********************************************/
void WinEDA_DrillFrame::GenDrillMap( int format )
/***********************************************/
/* Genere le plan de percage (Drill map) format HPGL ou POSTSCRIPT
*/
{
int ii, x, y;
int plotX, plotY, TextWidth;
FORET* foret;
int intervalle = 0, CharSize = 0;
EDA_BaseStruct* PtStruct;
int old_g_PlotOrient = g_PlotOrient;
wxString FullFileName, Mask( wxT( "*" ) ), Ext;
char line[1024];
int dX, dY;
wxPoint BoardCentre;
int PlotMarge_in_mils = 400; // Margin in 1/1000 inch
int marge = PlotMarge_in_mils * U_PCB;
wxSize SheetSize;
float fTextScale = 1.0;
double scale_x = 1.0, scale_y = 1.0;
Ki_PageDescr* SheetPS = NULL;
wxString msg;
/* Init extension */
switch( format )
{
case PLOT_FORMAT_HPGL:
Ext = wxT( "-drl.plt" );
break;
case PLOT_FORMAT_POST:
Ext = wxT( "-drl.ps" );
break;
default:
DisplayError( this, wxT( "WinEDA_DrillFrame::GenDrillMap() error" ) );
return;
}
/* Init file name */
FullFileName = m_Parent->m_CurrentScreen->m_FileName;
ChangeFileNameExt( FullFileName, Ext );
Mask += Ext;
FullFileName = EDA_FileSelector( _( "Drill Map file" ),
wxEmptyString, /* Chemin par defaut */
FullFileName, /* nom fichier par defaut */
Ext, /* extension par defaut */
Mask, /* Masque d'affichage */
this,
wxFD_SAVE,
TRUE
);
if( FullFileName.IsEmpty() )
return;
g_PlotOrient = 0;
/* calcul des dimensions et centre du PCB */
m_Parent->m_Pcb->ComputeBoundaryBox();
dX = m_Parent->m_Pcb->m_BoundaryBox.GetWidth();
dY = m_Parent->m_Pcb->m_BoundaryBox.GetHeight();
BoardCentre = m_Parent->m_Pcb->m_BoundaryBox.Centre();
// Calcul de l'echelle du dessin du PCB,
// Echelle 1 en HPGL, dessin sur feuille A4 en PS, + texte description des symboles
switch( format )
{
case PLOT_FORMAT_HPGL: /* Calcul des echelles de conversion format HPGL */
Scale_X = Scale_Y = 1.0;
scale_x = Scale_X * SCALE_HPGL;
scale_y = Scale_Y * SCALE_HPGL;
fTextScale = SCALE_HPGL;
SheetSize = m_Parent->m_CurrentScreen->m_CurrentSheet->m_Size;
SheetSize.x *= U_PCB;
SheetSize.y *= U_PCB;
g_PlotOffset.x = 0;
g_PlotOffset.y = (int) (SheetSize.y * scale_y);
break;
case PLOT_FORMAT_POST:
{
// calcul en unites internes des dimensions de la feuille ( connues en 1/1000 pouce )
SheetPS = &g_Sheet_A4;
SheetSize.x = SheetPS->m_Size.x * U_PCB;
SheetSize.y = SheetPS->m_Size.y * U_PCB;
float Xscale = (float) ( SheetSize.x - (marge * 2) ) / dX;
float Yscale = (float) ( SheetSize.y * 0.6 - (marge * 2) ) / dY;
scale_x = scale_y = MIN( Xscale, Yscale );
g_PlotOffset.x = -(SheetSize.x / 2) +
(int) (BoardCentre.x * scale_x) + marge;
g_PlotOffset.y = SheetSize.y / 2 +
(int) (BoardCentre.y * scale_y) - marge;
g_PlotOffset.y += SheetSize.y / 8; /* decalage pour legende */
break;
}
}
dest = wxFopen( FullFileName, wxT( "wt" ) );
if( dest == 0 )
{
msg.Printf( _( "Unable to create file <%s>" ), FullFileName.GetData() );
DisplayError( this, msg ); return;
}
/* Init : */
m_Parent->MsgPanel->EraseMsgBox();
Affiche_1_Parametre( m_Parent, 0, _( "File" ), FullFileName, BLUE );
/* Calcul de la liste des diametres de percage (liste des forets) */
ii = Gen_Liste_Forets( (FORET*) adr_lowmem, FALSE );
msg.Printf( wxT( "%d" ), ii );
Affiche_1_Parametre( m_Parent, 48, _( "Tools" ), msg, BROWN );
switch( format )
{
case PLOT_FORMAT_HPGL:
InitPlotParametresHPGL( g_PlotOffset, scale_x, scale_y );
PrintHeaderHPGL( dest, g_HPGL_Pen_Speed, g_HPGL_Pen_Num );
break;
case PLOT_FORMAT_POST:
{
int BBox[4];
BBox[0] = BBox[1] = PlotMarge_in_mils;
BBox[2] = SheetPS->m_Size.x - PlotMarge_in_mils;
BBox[3] = SheetPS->m_Size.y - PlotMarge_in_mils;
InitPlotParametresPS( g_PlotOffset, SheetPS,
(double) 1.0 / PCB_INTERNAL_UNIT, (double) 1.0 / PCB_INTERNAL_UNIT );
SetDefaultLineWidthPS( 10 ); // Set line with to 10/1000 inch
PrintHeaderPS( dest, wxT( "PCBNEW-PS" ), FullFileName, 1, BBox, wxLANDSCAPE );
InitPlotParametresPS( g_PlotOffset, SheetPS, scale_x, scale_y );
}
break;
default:
break;
}
/* Trace du contour ( couche EDGE ) */
PtStruct = m_Parent->m_Pcb->m_Drawings;
for( ; PtStruct != NULL; PtStruct = PtStruct->Pnext )
{
switch( PtStruct->Type() )
{
case TYPEDRAWSEGMENT:
PlotDrawSegment( (DRAWSEGMENT*) PtStruct, format, EDGE_LAYER );
break;
case TYPETEXTE:
PlotTextePcb( (TEXTE_PCB*) PtStruct, format, EDGE_LAYER );
break;
case TYPECOTATION:
PlotCotation( (COTATION*) PtStruct, format, EDGE_LAYER );
break;
case TYPEMIRE:
PlotMirePcb( (MIREPCB*) PtStruct, format, EDGE_LAYER );
break;
default:
DisplayError( this, wxT( "WinEDA_DrillFrame::GenDrillMap() : Unexpected Draw Type" ) );
break;
}
}
TextWidth = 50; // Set Drill Symbols width in 1/10000 mils
if( format == PLOT_FORMAT_POST )
{
sprintf( line, "%d setlinewidth\n", TextWidth );
fputs( line, dest );
}
ii = Plot_Drill_PcbMap( (FORET*) adr_lowmem, format );
msg.Printf( wxT( "%d" ), ii );
Affiche_1_Parametre( m_Parent, 64, _( "Drill" ), msg, GREEN );
/* Impression de la liste des symboles utilises */
CharSize = 800; /* text size in 1/10000 mils */
float CharScale = 1.0 / scale_x; /* real scale will be CharScale * scale_x,
* because the global plot scale is scale_x */
TextWidth = (int) (50 * CharScale); // Set text width
intervalle = (int) (CharSize * CharScale) + TextWidth;
switch( format )
{
case PLOT_FORMAT_HPGL:
{
/* generation des dim: commande SI x,y; x et y = dim en cm */
char csize[256];
sprintf( csize, "%2.3f", (float) CharSize * CharScale * 0.000254 );
to_point( csize );
sprintf( line, "SI %s, %s;\n", csize, csize );
break;
}
case PLOT_FORMAT_POST:
/* Reglage de l'epaisseur de traits des textes */
sprintf( line, "%d setlinewidth\n", TextWidth );
break;
default:
*line = 0;
break;
}
fputs( line, dest );
switch( format )
{
default:
case PLOT_FORMAT_POST:
g_PlotOffset.x = 0;
g_PlotOffset.y = 0;
InitPlotParametresPS( g_PlotOffset, SheetPS, scale_x, scale_x );
break;
case PLOT_FORMAT_HPGL:
InitPlotParametresHPGL( g_PlotOffset, scale_x, scale_x );
break;
}
/* Trace des informations */
/* Trace de "Infos" */
plotX = marge + 1000;
plotY = CharSize + 1000;
x = plotX; y = plotY;
x = +g_PlotOffset.x + (int) (x * fTextScale);
y = g_PlotOffset.y - (int) (y * fTextScale);
plotY += (int) ( intervalle * 1.2) + 200;
switch( format )
{
case PLOT_FORMAT_HPGL:
sprintf( line, "PU %d, %d; LBInfos\03;\n",
x + (int) (intervalle * CharScale * fTextScale),
y - (int) (CharSize / 2 * CharScale * fTextScale) );
fputs( line, dest );
break;
case PLOT_FORMAT_POST:
wxString Text = wxT( "Infos" );
Plot_1_texte( format, Text, 0, TextWidth,
x, y,
(int) (CharSize * CharScale), (int) (CharSize * CharScale),
FALSE );
break;
}
for( ii = 0, foret = (FORET*) adr_lowmem; ii < DrillToolsCount; ii++, foret++ )
{
int plot_diam;
if( foret->m_TotalCount == 0 )
continue;
plot_diam = (int) (foret->m_Diameter);
x = plotX; y = plotY;
x = -g_PlotOffset.x + (int) (x * fTextScale);
y = g_PlotOffset.y - (int) (y * fTextScale);
PlotDrillSymbol( wxPoint( x, y ), plot_diam, ii, format );
intervalle = (int) (CharSize * CharScale) + TextWidth;
intervalle = (int) ( intervalle * 1.2);
if( intervalle < (plot_diam + 200 + TextWidth) )
intervalle = plot_diam + 200 + TextWidth;
int rayon = plot_diam / 2;
x = plotX + rayon + (int) (CharSize * CharScale); y = plotY;
x = -g_PlotOffset.x + (int) (x * fTextScale);
y = g_PlotOffset.y - (int) (y * fTextScale);
/* Trace de la legende associee */
switch( format )
{
case PLOT_FORMAT_HPGL:
// List the diameter of each drill in the selected Drill Unit,
// and then its diameter in the other Drill Unit.
if( Unit_Drill_is_Inch )
sprintf( line, "PU %d, %d; LB%2.3f\" / %2.2fmm ",
x + (int) (intervalle * CharScale * fTextScale),
y - (int) (CharSize / 2 * CharScale * fTextScale),
float (foret->m_Diameter) * 0.0001,
float (foret->m_Diameter) * 0.00254 );
else
sprintf( line, "PU %d, %d; LB%2.2fmm / %2.3f\" ",
x + (int) (intervalle * CharScale * fTextScale),
y - (int) (CharSize / 2 * CharScale * fTextScale),
float (foret->m_Diameter) * 0.00254,
float (foret->m_Diameter) * 0.0001 );
fputs( line, dest );
// Now list how many holes and ovals are associated with each drill.
if( ( foret->m_TotalCount == 1 ) && ( foret->m_OvalCount == 0 ) )
sprintf( line, "(1 hole)\n" );
else if( foret->m_TotalCount == 1 ) // && ( foret->m_OvalCount == 1 )
sprintf( line, "(1 hole) (with 1 oblong)\n" );
else if( foret->m_OvalCount == 0 )
sprintf( line, "(%d holes)\n",
foret->m_TotalCount );
else if( foret->m_OvalCount == 1 )
sprintf( line, "(%d holes) (with 1 oblong)\n",
foret->m_TotalCount );
else // if ( foret->m_OvalCount > 1 )
sprintf( line, "(%d holes) (with %d oblongs)\n",
foret->m_TotalCount,
foret->m_OvalCount );
fputs( line, dest );
fputs( "\03;\n", dest );
break;
case PLOT_FORMAT_POST:
// List the diameter of each drill in the selected Drill Unit,
// and then its diameter in the other Drill Unit.
if( Unit_Drill_is_Inch )
sprintf( line, "%2.3f\" / %2.2fmm ",
float (foret->m_Diameter) * 0.0001,
float (foret->m_Diameter) * 0.00254 );
else
sprintf( line, "%2.2fmm / %2.3f\" ",
float (foret->m_Diameter) * 0.00254,
float (foret->m_Diameter) * 0.0001 );
msg = CONV_FROM_UTF8( line );
// Now list how many holes and ovals are associated with each drill.
if( ( foret->m_TotalCount == 1 ) && ( foret->m_OvalCount == 0 ) )
sprintf( line, "(1 hole)" );
else if( foret->m_TotalCount == 1 ) // && ( foret->m_OvalCount == 1 )
sprintf( line, "(1 hole) (with 1 oblong)" );
else if( foret->m_OvalCount == 0 )
sprintf( line, "(%d holes)",
foret->m_TotalCount );
else if( foret->m_OvalCount == 1 )
sprintf( line, "(%d holes) (with 1 oblong)",
foret->m_TotalCount );
else // if ( foret->m_OvalCount > 1 )
sprintf( line, "(%d holes) (with %d oblongs)",
foret->m_TotalCount,
foret->m_OvalCount );
msg += CONV_FROM_UTF8( line );
Plot_1_texte( format, msg, 0, TextWidth,
x, y,
(int) (CharSize * CharScale),
(int) (CharSize * CharScale),
FALSE );
break;
}
plotY += intervalle;
}
switch( format )
{
case PLOT_FORMAT_HPGL:
CloseFileHPGL( dest );
break;
case PLOT_FORMAT_POST:
CloseFilePS( dest );
break;
}
g_PlotOrient = old_g_PlotOrient;
}
/********************************************************************/
int WinEDA_DrillFrame::Plot_Drill_PcbMap( FORET* buffer, int format )
/*********************************************************************/
/** Trace la liste des trous a percer en format HPGL ou POSTSCRIPT
* @return drill count
* @param buffer = drill list buffer
* @param format = ouput format (hpgl / ps)
*/
{
FORET* foret;
TRACK* pt_piste;
D_PAD* pt_pad;
MODULE* Module;
int ii, diam, nb_trous;
wxPoint pos;
wxSize size;
nb_trous = 0;
/* create the drill list */
if( DrillToolsCount > 13 )
{
DisplayInfo( this,
_(
" Drill map: Too many diameter values to draw to draw one symbol per drill value (max 13)\nPlot uses circle shape for some drill values" ),
10 );
}
for( ii = 0, foret = (FORET*) buffer; ii < DrillToolsCount; ii++, foret++ )
{
/* create the via drill map */
{
pt_piste = m_Parent->m_Pcb->m_Track;
for( ; pt_piste != NULL; pt_piste = (TRACK*) pt_piste->Pnext )
{
if( pt_piste->Type() != TYPEVIA )
continue;
if( pt_piste->m_Drill == 0 )
continue;
int via_drill = g_DesignSettings.m_ViaDrill;
if( pt_piste->m_Drill >= 0 )
via_drill = pt_piste->m_Drill;
pos = pt_piste->m_Start;
PlotDrillSymbol( pos, via_drill, ii, format );
nb_trous++;
}
}
/* create the pad drill map: */
for( Module = m_Parent->m_Pcb->m_Modules; Module != NULL; Module = (MODULE*) Module->Pnext )
{
pt_pad = (D_PAD*) Module->m_Pads;
for( ; pt_pad != NULL; pt_pad = (D_PAD*) pt_pad->Pnext )
{
switch( pt_pad->m_DrillShape )
{
case CIRCLE:
diam = pt_pad->m_Drill.x;
if( diam != foret->m_Diameter )
continue;
PlotDrillSymbol( pt_pad->m_Pos, diam, ii, format );
break;
case OVALE:
if( pt_pad->m_DrillShape != OVALE )
continue;
diam = MIN( pt_pad->m_Drill.x, pt_pad->m_Drill.y );
if( diam != foret->m_Diameter )
continue;
PlotOvalDrillSymbol( pt_pad->m_Pos, pt_pad->m_Drill, pt_pad->m_Orient, format );
break;
}
nb_trous++;
}
/* Fin examen 1 module */
}
/* Fin 1 passe de foret */
}
/* fin analyse des trous de modules */
return nb_trous;
}
/************************************************************************************/
void PlotDrillSymbol( const wxPoint& position, int diametre, int num_forme, int format )
/************************************************************************************/
/* Trace un motif de numero de forme num_forme, aux coord x0, y0.
* x0, y0 = coordonnees tables
* diametre = diametre (coord table) du trou
* num_forme = index ( permet de gererer des formes caract )
*/
{
int rayon = diametre / 2;
void (*FctPlume)( wxPoint pos, int state );
int x0, y0;
x0 = position.x; y0 = position.y;
FctPlume = Move_Plume_HPGL;
if( format == PLOT_FORMAT_POST )
FctPlume = LineTo_PS;
switch( num_forme )
{
case 0: /* vias : forme en X */
FctPlume( wxPoint( x0 - rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 + rayon, y0 + rayon ), 'D' );
FctPlume( wxPoint( x0 + rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 - rayon, y0 + rayon ), 'D' );
break;
case 1: /* Cercle */
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL( wxPoint( x0, y0 ), diametre, FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST( wxPoint( x0, y0 ), diametre, FILAIRE );
break;
case 2: /* forme en + */
FctPlume( wxPoint( x0, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0, y0 + rayon ), 'D' );
FctPlume( wxPoint( x0 + rayon, y0 ), 'U' );
FctPlume( wxPoint( x0 - rayon, y0 ), 'D' );
break;
case 3: /* forme en X cercle */
FctPlume( wxPoint( x0 - rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 + rayon, y0 + rayon ), 'D' );
FctPlume( wxPoint( x0 + rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 - rayon, y0 + rayon ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL( wxPoint( x0, y0 ), diametre, FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST( wxPoint( x0, y0 ), diametre, FILAIRE );
break;
case 4: /* forme en cercle barre de - */
FctPlume( wxPoint( x0 - rayon, y0 ), 'U' );
FctPlume( wxPoint( x0 + rayon, y0 ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL( wxPoint( x0, y0 ), diametre, FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST( wxPoint( x0, y0 ), diametre, FILAIRE );
break;
case 5: /* forme en cercle barre de | */
FctPlume( wxPoint( x0, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0, y0 + rayon ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL( wxPoint( x0, y0 ), diametre, FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST( wxPoint( x0, y0 ), diametre, FILAIRE );
break;
case 6: /* forme en carre */
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 0,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 0,
FILAIRE );
break;
case 7: /* forme en losange */
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
break;
case 8: /* forme en carre barre par un X*/
FctPlume( wxPoint( x0 - rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 + rayon, y0 + rayon ), 'D' );
FctPlume( wxPoint( x0 + rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 - rayon, y0 + rayon ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 0,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 0,
FILAIRE );
break;
case 9: /* forme en losange barre par un +*/
FctPlume( wxPoint( x0, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0, y0 + rayon ), 'D' );
FctPlume( wxPoint( x0 + rayon, y0 ), 'U' );
FctPlume( wxPoint( x0 - rayon, y0 ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
break;
case 10: /* forme en carre barre par un '/' */
FctPlume( wxPoint( x0 - rayon, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0 + rayon, y0 + rayon ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 0,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 0,
FILAIRE );
break;
case 11: /* forme en losange barre par un |*/
FctPlume( wxPoint( x0, y0 - rayon ), 'U' );
FctPlume( wxPoint( x0, y0 + rayon ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
break;
case 12: /* forme en losange barre par un -*/
FctPlume( wxPoint( x0 - rayon, y0 ), 'U' );
FctPlume( wxPoint( x0 + rayon, y0 ), 'D' );
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST( wxPoint( x0, y0 ), wxSize( rayon, rayon ), wxSize( 0,
0 ), 450,
FILAIRE );
break;
default:
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL( wxPoint( x0, y0 ), diametre, FILAIRE );
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST( wxPoint( x0, y0 ), diametre, FILAIRE );
break;
}
if( format == PLOT_FORMAT_HPGL )
Plume_HPGL( 'U' );
}
/*******************************************************************************************/
void PlotOvalDrillSymbol( const wxPoint& position, const wxSize& size, int orient, int format )
/*******************************************************************************************/
{
switch( format )
{
case PLOT_FORMAT_HPGL:
trace_1_pastille_OVALE_HPGL( position, size, orient, FILAIRE );
break;
case PLOT_FORMAT_POST:
trace_1_pastille_OVALE_POST( position, size, orient, FILAIRE );
break;
}
}
/*******************************************/
void WinEDA_DrillFrame::GenDrillReport()
/*******************************************/
/*
* Create a list of drill values and drill count
*/
{
wxString FileName, Mask( wxT( "*" ) ), Ext( wxT( ".rpt" ) );
int ii, TotalHoleCount;
char line[1024];
FORET* foret;
wxString msg;
FileName = m_Parent->m_CurrentScreen->m_FileName;
ChangeFileNameExt( FileName, wxT( "-drl" ) + Ext );
Mask += Ext;
FileName = EDA_FileSelector( _( "Drill Report file" ),
wxEmptyString, /* Chemin par defaut */
FileName, /* nom fichier par defaut */
Ext, /* extension par defaut */
Mask, /* Masque d'affichage */
this,
wxFD_SAVE,
TRUE
);
if( FileName.IsEmpty() )
return;
dest = wxFopen( FileName, wxT( "w" ) );
if( dest == 0 )
{
msg = _( "Unable to create file " ) + FileName;
DisplayError( this, msg );
return;
}
m_Parent->MsgPanel->EraseMsgBox();
Affiche_1_Parametre( m_Parent, 0, _( "File" ), FileName, BLUE );
/* Determine the list of the different drill diameters. */
ii = Gen_Liste_Forets( (FORET*) adr_lowmem, FALSE );
msg.Printf( wxT( "%d" ), ii );
Affiche_1_Parametre( m_Parent, 30, _( "Tools" ), msg, BROWN );
fprintf( dest, "Drill report for %s\n", CONV_TO_UTF8( m_Parent->m_CurrentScreen->m_FileName ) );
fprintf( dest, "Created on %s\n", DateAndTime( line ) );
// List which Drill Unit option had been selected for the associated drill file.
if( Unit_Drill_is_Inch )
fputs( "Selected Drill Unit: Imperial (\")\n\n", dest );
else
fputs( "Selected Drill Unit: Metric (mm)\n\n", dest );
TotalHoleCount = 0;
for( ii = 0, foret = (FORET*) adr_lowmem; ii < DrillToolsCount; ii++, foret++ )
{
// List the tool number assigned to each drill,
// then its diameter in the selected Drill Unit,
// and then its diameter in the other Drill Unit.
if( Unit_Drill_is_Inch )
sprintf( line, "T%d %2.3f\" %2.2fmm ",
ii + 1,
float (foret->m_Diameter) * 0.0001,
float (foret->m_Diameter) * 0.00254 );
else
sprintf( line, "T%d %2.2fmm %2.3f\" ",
ii + 1,
float (foret->m_Diameter) * 0.00254,
float (foret->m_Diameter) * 0.0001 );
fputs( line, dest );
// Now list how many holes and ovals are associated with each drill.
if( ( foret->m_TotalCount == 1 ) && ( foret->m_OvalCount == 0 ) )
sprintf( line, "(1 hole)\n" );
else if( foret->m_TotalCount == 1 ) // && ( foret->m_OvalCount == 1 )
sprintf( line, "(1 hole) (with 1 oblong)\n" );
else if( foret->m_OvalCount == 0 )
sprintf( line, "(%d holes)\n",
foret->m_TotalCount );
else if( foret->m_OvalCount == 1 )
sprintf( line, "(%d holes) (with 1 oblong)\n",
foret->m_TotalCount );
else // if ( foret->m_OvalCount > 1 )
sprintf( line, "(%d holes) (with %d oblongs)\n",
foret->m_TotalCount,
foret->m_OvalCount );
fputs( line, dest );
TotalHoleCount += foret->m_TotalCount;
}
msg.Printf( wxT( "%d" ), TotalHoleCount );
Affiche_1_Parametre( m_Parent, 45, _( "Drill" ), msg, GREEN );
fclose( dest );
}