From ef5eabb63d99cb33444166ebee6c0f32b55f1780 Mon Sep 17 00:00:00 2001
From: Mitchell Hashimoto <mitchell.hashimoto@gmail.com>
Date: Tue, 14 Aug 2012 22:39:25 -0700
Subject: [PATCH] Remove the builtin VM middleware that are now part of the VB
 provider

---
 lib/vagrant/action/vm/boot.rb                 |  53 ---
 lib/vagrant/action/vm/check_box.rb            |  33 --
 .../action/vm/check_guest_additions.rb        |  38 --
 .../action/vm/check_port_collisions.rb        |  89 ----
 lib/vagrant/action/vm/clean_machine_folder.rb |  43 --
 .../action/vm/clear_forwarded_ports.rb        |  18 -
 .../action/vm/clear_network_interfaces.rb     |  31 --
 lib/vagrant/action/vm/clear_shared_folders.rb |  18 -
 lib/vagrant/action/vm/customize.rb            |  36 --
 lib/vagrant/action/vm/default_name.rb         |  22 -
 lib/vagrant/action/vm/destroy.rb              |  19 -
 .../vm/destroy_unused_network_interfaces.rb   |  20 -
 lib/vagrant/action/vm/discard_state.rb        |  22 -
 lib/vagrant/action/vm/forward_ports.rb        |  92 ----
 lib/vagrant/action/vm/halt.rb                 |  36 --
 lib/vagrant/action/vm/host_name.rb            |  21 -
 lib/vagrant/action/vm/import.rb               |  53 ---
 lib/vagrant/action/vm/match_mac_address.rb    |  21 -
 lib/vagrant/action/vm/network.rb              | 406 ------------------
 lib/vagrant/action/vm/nfs.rb                  | 196 ---------
 lib/vagrant/action/vm/provision.rb            |  61 ---
 lib/vagrant/action/vm/provisioner_cleanup.rb  |  26 --
 lib/vagrant/action/vm/prune_nfs_exports.rb    |  20 -
 lib/vagrant/action/vm/sane_defaults.rb        |  78 ----
 lib/vagrant/action/vm/setup_package_files.rb  |  54 ---
 lib/vagrant/action/vm/share_folders.rb        | 114 -----
 26 files changed, 1620 deletions(-)
 delete mode 100644 lib/vagrant/action/vm/boot.rb
 delete mode 100644 lib/vagrant/action/vm/check_box.rb
 delete mode 100644 lib/vagrant/action/vm/check_guest_additions.rb
 delete mode 100644 lib/vagrant/action/vm/check_port_collisions.rb
 delete mode 100644 lib/vagrant/action/vm/clean_machine_folder.rb
 delete mode 100644 lib/vagrant/action/vm/clear_forwarded_ports.rb
 delete mode 100644 lib/vagrant/action/vm/clear_network_interfaces.rb
 delete mode 100644 lib/vagrant/action/vm/clear_shared_folders.rb
 delete mode 100644 lib/vagrant/action/vm/customize.rb
 delete mode 100644 lib/vagrant/action/vm/default_name.rb
 delete mode 100644 lib/vagrant/action/vm/destroy.rb
 delete mode 100644 lib/vagrant/action/vm/destroy_unused_network_interfaces.rb
 delete mode 100644 lib/vagrant/action/vm/discard_state.rb
 delete mode 100644 lib/vagrant/action/vm/forward_ports.rb
 delete mode 100644 lib/vagrant/action/vm/halt.rb
 delete mode 100644 lib/vagrant/action/vm/host_name.rb
 delete mode 100644 lib/vagrant/action/vm/import.rb
 delete mode 100644 lib/vagrant/action/vm/match_mac_address.rb
 delete mode 100644 lib/vagrant/action/vm/network.rb
 delete mode 100644 lib/vagrant/action/vm/nfs.rb
 delete mode 100644 lib/vagrant/action/vm/provision.rb
 delete mode 100644 lib/vagrant/action/vm/provisioner_cleanup.rb
 delete mode 100644 lib/vagrant/action/vm/prune_nfs_exports.rb
 delete mode 100644 lib/vagrant/action/vm/sane_defaults.rb
 delete mode 100644 lib/vagrant/action/vm/setup_package_files.rb
 delete mode 100644 lib/vagrant/action/vm/share_folders.rb

diff --git a/lib/vagrant/action/vm/boot.rb b/lib/vagrant/action/vm/boot.rb
deleted file mode 100644
index 6a2ce7d35..000000000
--- a/lib/vagrant/action/vm/boot.rb
+++ /dev/null
@@ -1,53 +0,0 @@
-module Vagrant
-  module Action
-    module VM
-      class Boot
-        def initialize(app, env)
-          @app = app
-          @env = env
-        end
-
-        def call(env)
-          @env = env
-
-          # Start up the VM and wait for it to boot.
-          boot
-          raise Errors::VMFailedToBoot if !wait_for_boot
-
-          @app.call(env)
-        end
-
-        def boot
-          @env[:ui].info I18n.t("vagrant.actions.vm.boot.booting")
-          @env[:vm].driver.start(@env[:vm].config.vm.boot_mode)
-        end
-
-        def wait_for_boot
-          @env[:ui].info I18n.t("vagrant.actions.vm.boot.waiting")
-
-          @env[:vm].config.ssh.max_tries.to_i.times do |i|
-            if @env[:vm].channel.ready?
-              @env[:ui].info I18n.t("vagrant.actions.vm.boot.ready")
-              return true
-            end
-
-            # Return true so that the vm_failed_to_boot error doesn't
-            # get shown
-            return true if @env[:interrupted]
-
-            # If the VM is not starting or running, something went wrong
-            # and we need to show a useful error.
-            state = @env[:vm].state
-            raise Errors::VMFailedToRun if state != :starting && state != :running
-
-            sleep 2 if !@env["vagrant.test"]
-          end
-
-          @env[:ui].error I18n.t("vagrant.actions.vm.boot.failed")
-          false
-        end
-      end
-    end
-  end
-end
-
diff --git a/lib/vagrant/action/vm/check_box.rb b/lib/vagrant/action/vm/check_box.rb
deleted file mode 100644
index 454f8b492..000000000
--- a/lib/vagrant/action/vm/check_box.rb
+++ /dev/null
@@ -1,33 +0,0 @@
-module Vagrant
-  module Action
-    module VM
-      class CheckBox
-        def initialize(app, env)
-          @app = app
-        end
-
-        def call(env)
-          box_name = env[:vm].config.vm.box
-          raise Errors::BoxNotSpecified if !box_name
-
-          if !env[:box_collection].find(box_name, :virtualbox)
-            box_url = env[:vm].config.vm.box_url
-            raise Errors::BoxSpecifiedDoesntExist, :name => box_name if !box_url
-
-            # Add the box then reload the box collection so that it becomes
-            # aware of it.
-            env[:ui].info I18n.t("vagrant.actions.vm.check_box.not_found", :name => box_name)
-            env[:box_collection].add(box_name, box_url)
-            env[:box_collection].reload!
-
-            # Reload the environment and set the VM to be the new loaded VM.
-            env[:vm].env.reload!
-            env[:vm] = env[:vm].env.vms[env[:vm].name]
-          end
-
-          @app.call(env)
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/check_guest_additions.rb b/lib/vagrant/action/vm/check_guest_additions.rb
deleted file mode 100644
index fb96a5e65..000000000
--- a/lib/vagrant/action/vm/check_guest_additions.rb
+++ /dev/null
@@ -1,38 +0,0 @@
-module Vagrant
-  module Action
-    module VM
-      # Middleware which verifies that the VM has the proper guest additions
-      # installed and prints a warning if they're not detected or if the
-      # version does not match the installed VirtualBox version.
-      class CheckGuestAdditions
-        def initialize(app, env)
-          @app = app
-        end
-
-        def call(env)
-          # Use the raw interface for now, while the virtualbox gem
-          # doesn't support guest properties (due to cross platform issues)
-          version = env[:vm].driver.read_guest_additions_version
-          if !version
-            env[:ui].warn I18n.t("vagrant.actions.vm.check_guest_additions.not_detected")
-          else
-            # Strip the -OSE/_OSE off from the guest additions and the virtual box
-            # version since all the matters are that the version _numbers_ match up.
-            guest_version, vb_version = [version, env[:vm].driver.version].map do |v|
-              v.gsub(/[-_]ose/i, '')
-            end
-
-            if guest_version != vb_version
-              env[:ui].warn(I18n.t("vagrant.actions.vm.check_guest_additions.version_mismatch",
-                                   :guest_version => version,
-                                   :virtualbox_version => vb_version))
-            end
-          end
-
-          # Continue
-          @app.call(env)
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/check_port_collisions.rb b/lib/vagrant/action/vm/check_port_collisions.rb
deleted file mode 100644
index 254b351ad..000000000
--- a/lib/vagrant/action/vm/check_port_collisions.rb
+++ /dev/null
@@ -1,89 +0,0 @@
-require "vagrant/util/is_port_open"
-
-module Vagrant
-  module Action
-    module VM
-      # Action that checks to make sure there are no forwarded port collisions,
-      # and raises an exception if there is.
-      class CheckPortCollisions
-        include Util::IsPortOpen
-
-        def initialize(app, env)
-          @app = app
-        end
-
-        def call(env)
-          # For the handlers...
-          @env = env
-
-          # Figure out how we handle port collisions. By default we error.
-          handler  = env[:port_collision_handler] || :error
-
-          # Read our forwarded ports, if we have any, to override what
-          # we have configured.
-          current = {}
-          env[:vm].driver.read_forwarded_ports.each do |nic, name, hostport, guestport|
-            current[name] = hostport.to_i
-          end
-
-          existing = env[:vm].driver.read_used_ports
-          env[:vm].config.vm.forwarded_ports.each do |options|
-            # Use the proper port, whether that be the configured port or the
-            # port that is currently on use of the VM.
-            hostport = options[:hostport].to_i
-            hostport = current[options[:name]] if current.has_key?(options[:name])
-
-            if existing.include?(hostport) || is_port_open?("localhost", hostport)
-              # We have a collision! Handle it
-              send("handle_#{handler}".to_sym, options, existing)
-            end
-          end
-
-          @app.call(env)
-        end
-
-        # Handles a port collision by raising an exception.
-        def handle_error(options, existing_ports)
-          raise Errors::ForwardPortCollisionResume
-        end
-
-        # Handles a port collision by attempting to fix it.
-        def handle_correct(options, existing_ports)
-          # We need to keep this for messaging purposes
-          original_hostport = options[:hostport]
-
-          if !options[:auto]
-            # Auto fixing is disabled for this port forward, so we
-            # must throw an error so the user can fix it.
-            raise Errors::ForwardPortCollision, :host_port => options[:hostport].to_s,
-                                                :guest_port => options[:guestport].to_s
-          end
-
-          # Get the auto port range and get rid of the used ports and
-          # ports which are being used in other forwards so we're just
-          # left with available ports.
-          range = @env[:vm].config.vm.auto_port_range.to_a
-          range -= @env[:vm].config.vm.forwarded_ports.collect { |opts| opts[:hostport].to_i }
-          range -= existing_ports
-
-          if range.empty?
-            raise Errors::ForwardPortAutolistEmpty, :vm_name => @env[:vm].name,
-                                                    :host_port => options[:hostport].to_s,
-                                                    :guest_port => options[:guestport].to_s
-          end
-
-          # Set the port up to be the first one and add that port to
-          # the used list.
-          options[:hostport] = range.shift
-          existing_ports << options[:hostport]
-
-          # Notify the user
-          @env[:ui].info(I18n.t("vagrant.actions.vm.forward_ports.fixed_collision",
-                                :host_port => original_hostport.to_s,
-                                :guest_port => options[:guestport].to_s,
-                                :new_port => options[:hostport]))
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/clean_machine_folder.rb b/lib/vagrant/action/vm/clean_machine_folder.rb
deleted file mode 100644
index 66c522342..000000000
--- a/lib/vagrant/action/vm/clean_machine_folder.rb
+++ /dev/null
@@ -1,43 +0,0 @@
-require 'fileutils'
-
-module Vagrant
-  module Action
-    module VM
-      # Cleans up the VirtualBox machine folder for any ".xml-prev"
-      # files which VirtualBox may have left over. This is a bug in
-      # VirtualBox. As soon as this is fixed, this middleware can and
-      # will be removed.
-      class CleanMachineFolder
-        def initialize(app, env)
-          @app = app
-        end
-
-        def call(env)
-          clean_machine_folder(env[:vm].driver.read_machine_folder)
-          @app.call(env)
-        end
-
-        def clean_machine_folder(machine_folder)
-          folder = File.join(machine_folder, "*")
-
-          # Small safeguard against potentially unwanted rm-rf, since the default
-          # machine folder will typically always be greater than 10 characters long.
-          # For users with it < 10, out of luck?
-          return if folder.length < 10
-
-          Dir[folder].each do |f|
-            next unless File.directory?(f)
-
-            keep = Dir["#{f}/**/*"].find do |d|
-              # Find a file that doesn't have ".xml-prev" as the suffix,
-              # which signals that we want to keep this folder
-              File.file?(d) && !(File.basename(d) =~ /\.vbox-prev$/)
-            end
-
-            FileUtils.rm_rf(f) if !keep
-          end
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/clear_forwarded_ports.rb b/lib/vagrant/action/vm/clear_forwarded_ports.rb
deleted file mode 100644
index cf25df861..000000000
--- a/lib/vagrant/action/vm/clear_forwarded_ports.rb
+++ /dev/null
@@ -1,18 +0,0 @@
-module Vagrant
-  module Action
-    module VM
-      class ClearForwardedPorts
-        def initialize(app, env)
-          @app = app
-        end
-
-        def call(env)
-          env[:ui].info I18n.t("vagrant.actions.vm.clear_forward_ports.deleting")
-          env[:vm].driver.clear_forwarded_ports
-
-          @app.call(env)
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/clear_network_interfaces.rb b/lib/vagrant/action/vm/clear_network_interfaces.rb
deleted file mode 100644
index 8d27a5d22..000000000
--- a/lib/vagrant/action/vm/clear_network_interfaces.rb
+++ /dev/null
@@ -1,31 +0,0 @@
-module Vagrant
-  module Action
-    module VM
-      class ClearNetworkInterfaces
-        def initialize(app, env)
-          @app = app
-        end
-
-        def call(env)
-          # Create the adapters array to make all adapters nothing.
-          # We do adapters 2 to 8 because that is every built-in adapter
-          # excluding the NAT adapter on port 1 which Vagrant always
-          # expects to exist.
-          adapters = []
-          2.upto(8).each do |i|
-            adapters << {
-              :adapter => i,
-              :type    => :none
-            }
-          end
-
-          # "Enable" all the adapters we setup.
-          env[:ui].info I18n.t("vagrant.actions.vm.clear_network_interfaces.deleting")
-          env[:vm].driver.enable_adapters(adapters)
-
-          @app.call(env)
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/clear_shared_folders.rb b/lib/vagrant/action/vm/clear_shared_folders.rb
deleted file mode 100644
index 7ebeee543..000000000
--- a/lib/vagrant/action/vm/clear_shared_folders.rb
+++ /dev/null
@@ -1,18 +0,0 @@
-module Vagrant
-  module Action
-    module VM
-      class ClearSharedFolders
-        def initialize(app, env)
-          @app = app
-          @env = env
-        end
-
-        def call(env)
-          env[:vm].driver.clear_shared_folders
-
-          @app.call(env)
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/customize.rb b/lib/vagrant/action/vm/customize.rb
deleted file mode 100644
index a8696ec91..000000000
--- a/lib/vagrant/action/vm/customize.rb
+++ /dev/null
@@ -1,36 +0,0 @@
-module Vagrant
-  module Action
-    module VM
-      class Customize
-        def initialize(app, env)
-          @app = app
-        end
-
-        def call(env)
-          customizations = env[:vm].config.vm.customizations
-          if !customizations.empty?
-            env[:ui].info I18n.t("vagrant.actions.vm.customize.running")
-
-            # Execute each customization command.
-            customizations.each do |command|
-              processed_command = command.collect do |arg|
-                arg = env[:vm].uuid if arg == :id
-                arg.to_s
-              end
-
-              result = env[:vm].driver.execute_command(processed_command)
-              if result.exit_code != 0
-                raise Errors::VMCustomizationFailed, {
-                  :command => processed_command.inspect,
-                  :error   => result.stderr
-                }
-              end
-            end
-          end
-
-          @app.call(env)
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/default_name.rb b/lib/vagrant/action/vm/default_name.rb
deleted file mode 100644
index 3ae69851d..000000000
--- a/lib/vagrant/action/vm/default_name.rb
+++ /dev/null
@@ -1,22 +0,0 @@
-require 'log4r'
-
-module Vagrant
-  module Action
-    module VM
-      class DefaultName
-        def initialize(app, env)
-          @logger = Log4r::Logger.new("vagrant::action::vm::defaultname")
-          @app = app
-        end
-
-        def call(env)
-          @logger.info("Setting the default name of the VM")
-          name = env[:root_path].basename.to_s + "_#{Time.now.to_i}"
-          env[:vm].driver.set_name(name)
-
-          @app.call(env)
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/destroy.rb b/lib/vagrant/action/vm/destroy.rb
deleted file mode 100644
index 2af9b0a18..000000000
--- a/lib/vagrant/action/vm/destroy.rb
+++ /dev/null
@@ -1,19 +0,0 @@
-module Vagrant
-  module Action
-    module VM
-      class Destroy
-        def initialize(app, env)
-          @app = app
-        end
-
-        def call(env)
-          env[:ui].info I18n.t("vagrant.actions.vm.destroy.destroying")
-          env[:vm].driver.delete
-          env[:vm].uuid = nil
-
-          @app.call(env)
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/destroy_unused_network_interfaces.rb b/lib/vagrant/action/vm/destroy_unused_network_interfaces.rb
deleted file mode 100644
index a0fb94c8b..000000000
--- a/lib/vagrant/action/vm/destroy_unused_network_interfaces.rb
+++ /dev/null
@@ -1,20 +0,0 @@
-module Vagrant
-  module Action
-    module VM
-      # Destroys the unused host only interfaces. This middleware cleans
-      # up any created host only networks.
-      class DestroyUnusedNetworkInterfaces
-        def initialize(app, env)
-          @app = app
-        end
-
-        def call(env)
-          env[:vm].driver.delete_unused_host_only_networks
-
-          # Continue along
-          @app.call(env)
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/discard_state.rb b/lib/vagrant/action/vm/discard_state.rb
deleted file mode 100644
index 408b4580f..000000000
--- a/lib/vagrant/action/vm/discard_state.rb
+++ /dev/null
@@ -1,22 +0,0 @@
-module Vagrant
-  module Action
-    module VM
-      # Discards the saved state of the VM if its saved. If its
-      # not saved, does nothing.
-      class DiscardState
-        def initialize(app, env)
-          @app = app
-        end
-
-        def call(env)
-          if env[:vm].state == :saved
-            env[:ui].info I18n.t("vagrant.actions.vm.discard_state.discarding")
-            env[:vm].driver.discard_saved_state
-          end
-
-          @app.call(env)
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/forward_ports.rb b/lib/vagrant/action/vm/forward_ports.rb
deleted file mode 100644
index 59c5d2a3f..000000000
--- a/lib/vagrant/action/vm/forward_ports.rb
+++ /dev/null
@@ -1,92 +0,0 @@
-module Vagrant
-  module Action
-    module VM
-      class ForwardPorts
-        def initialize(app,env)
-          @app = app
-        end
-
-        #--------------------------------------------------------------
-        # Execution
-        #--------------------------------------------------------------
-        def call(env)
-          @env = env
-
-          # Get the ports we're forwarding
-          ports = forward_port_definitions
-
-          # Warn if we're port forwarding to any privileged ports...
-          threshold_check(ports)
-
-          env[:ui].info I18n.t("vagrant.actions.vm.forward_ports.forwarding")
-          forward_ports(ports)
-
-          @app.call(env)
-        end
-
-        # This returns an array of forwarded ports with overrides properly
-        # squashed.
-        def forward_port_definitions
-          # Get all the port mappings in the order they're defined and
-          # organize them by their guestport, taking the "last one wins"
-          # approach.
-          guest_port_mapping = {}
-          @env[:vm].config.vm.forwarded_ports.each do |options|
-            guest_port_mapping[options[:guestport]] = options
-          end
-
-          # Return the values, since the order doesn't really matter
-          guest_port_mapping.values
-        end
-
-        # This method checks for any forwarded ports on the host below
-        # 1024, which causes the forwarded ports to fail.
-        def threshold_check(ports)
-          ports.each do |options|
-            if options[:hostport] <= 1024
-              @env[:ui].warn I18n.t("vagrant.actions.vm.forward_ports.privileged_ports")
-              return
-            end
-          end
-        end
-
-        def forward_ports(mappings)
-          ports = []
-
-          interfaces = @env[:vm].driver.read_network_interfaces
-
-          mappings.each do |options|
-            message_attributes = {
-              :guest_port => options[:guestport],
-              :host_port => options[:hostport],
-              :adapter => options[:adapter]
-            }
-
-            # Assuming the only reason to establish port forwarding is
-            # because the VM is using Virtualbox NAT networking. Host-only
-            # bridged networking don't require port-forwarding and establishing
-            # forwarded ports on these attachment types has uncertain behaviour.
-            @env[:ui].info(I18n.t("vagrant.actions.vm.forward_ports.forwarding_entry",
-                                    message_attributes))
-
-            # Port forwarding requires the network interface to be a NAT interface,
-            # so verify that that is the case.
-            if interfaces[options[:adapter]][:type] != :nat
-              @env[:ui].info(I18n.t("vagrant.actions.vm.forward_ports.non_nat",
-                                    message_attributes))
-              next
-            end
-
-            # Add the options to the ports array to send to the driver later
-            ports << options.merge(:name => options[:name], :adapter => options[:adapter])
-          end
-
-          if !ports.empty?
-            # We only need to forward ports if there are any to forward
-            @env[:vm].driver.forward_ports(ports)
-          end
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/halt.rb b/lib/vagrant/action/vm/halt.rb
deleted file mode 100644
index 65bc06d0d..000000000
--- a/lib/vagrant/action/vm/halt.rb
+++ /dev/null
@@ -1,36 +0,0 @@
-module Vagrant
-  module Action
-    module VM
-      class Halt
-        def initialize(app, env, options=nil)
-          @app = app
-          env.merge!(options || {})
-        end
-
-        def call(env)
-          current_state = env[:vm].state
-          if current_state == :running || current_state == :gurumeditation
-            # If the VM is running and we're not forcing, we can
-            # attempt a graceful shutdown
-            if current_state == :running && !env["force"]
-              env[:ui].info I18n.t("vagrant.actions.vm.halt.graceful")
-              env[:vm].guest.halt
-            end
-
-            # If we're not powered off now, then force it
-            if env[:vm].state != :poweroff
-              env[:ui].info I18n.t("vagrant.actions.vm.halt.force")
-              env[:vm].driver.halt
-            end
-
-            # Sleep for a second to verify that the VM properly
-            # cleans itself up
-            sleep 1 if !env["vagrant.test"]
-          end
-
-          @app.call(env)
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/host_name.rb b/lib/vagrant/action/vm/host_name.rb
deleted file mode 100644
index 8df7a9fee..000000000
--- a/lib/vagrant/action/vm/host_name.rb
+++ /dev/null
@@ -1,21 +0,0 @@
-module Vagrant
-  module Action
-    module VM
-      class HostName
-        def initialize(app, env)
-          @app = app
-        end
-
-        def call(env)
-          @app.call(env)
-
-          host_name = env[:vm].config.vm.host_name
-          if !host_name.nil?
-            env[:ui].info I18n.t("vagrant.actions.vm.host_name.setting")
-            env[:vm].guest.change_host_name(host_name)
-          end
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/import.rb b/lib/vagrant/action/vm/import.rb
deleted file mode 100644
index 6e690d24d..000000000
--- a/lib/vagrant/action/vm/import.rb
+++ /dev/null
@@ -1,53 +0,0 @@
-module Vagrant
-  module Action
-    module VM
-      class Import
-        # The name for easy reference
-        def self.name
-          :import
-        end
-
-        def initialize(app, env)
-          @app = app
-        end
-
-        def call(env)
-          env[:ui].info I18n.t("vagrant.actions.vm.import.importing", :name => env[:vm].box.name)
-
-          # Import the virtual machine
-          ovf_file = env[:vm].box.directory.join("box.ovf").to_s
-          env[:vm].uuid = env[:vm].driver.import(ovf_file) do |progress|
-            env[:ui].clear_line
-            env[:ui].report_progress(progress, 100, false)
-          end
-
-          # Clear the line one last time since the progress meter doesn't disappear
-          # immediately.
-          env[:ui].clear_line
-
-          # If we got interrupted, then the import could have been
-          # interrupted and its not a big deal. Just return out.
-          return if env[:interrupted]
-
-          # Flag as erroneous and return if import failed
-          raise Errors::VMImportFailure if !env[:vm].uuid
-
-          # Import completed successfully. Continue the chain
-          @app.call(env)
-        end
-
-        def recover(env)
-          if env[:vm].created?
-            return if env["vagrant.error"].is_a?(Errors::VagrantError)
-
-            # Interrupted, destroy the VM. We note that we don't want to
-            # validate the configuration here.
-            destroy_env = env.clone
-            destroy_env[:validate] = false
-            env[:action_runner].run(:destroy, destroy_env)
-          end
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/match_mac_address.rb b/lib/vagrant/action/vm/match_mac_address.rb
deleted file mode 100644
index 70da6b2a4..000000000
--- a/lib/vagrant/action/vm/match_mac_address.rb
+++ /dev/null
@@ -1,21 +0,0 @@
-module Vagrant
-  module Action
-    module VM
-      class MatchMACAddress
-        def initialize(app, env)
-          @app = app
-        end
-
-        def call(env)
-          raise Errors::VMBaseMacNotSpecified if !env[:vm].config.vm.base_mac
-
-          # Create the proc which we want to use to modify the virtual machine
-          env[:ui].info I18n.t("vagrant.actions.vm.match_mac.matching")
-          env[:vm].driver.set_mac_address(env[:vm].config.vm.base_mac)
-
-          @app.call(env)
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/network.rb b/lib/vagrant/action/vm/network.rb
deleted file mode 100644
index f10d5d957..000000000
--- a/lib/vagrant/action/vm/network.rb
+++ /dev/null
@@ -1,406 +0,0 @@
-require 'set'
-
-require 'log4r'
-
-require 'vagrant/util/network_ip'
-
-module Vagrant
-  module Action
-    module VM
-      # This action handles all `config.vm.network` configurations by
-      # setting up the VM properly and enabling the networks afterword.
-      class Network
-        # Utilities to deal with network addresses
-        include Util::NetworkIP
-
-        def initialize(app, env)
-          @logger = Log4r::Logger.new("vagrant::action::vm::network")
-
-          @app = app
-        end
-
-        def call(env)
-          @env = env
-
-          # First we have to get the array of adapters that we need
-          # to create on the virtual machine itself, as well as the
-          # driver-agnostic network configurations for each.
-          @logger.debug("Determining adapters and networks...")
-          adapters = []
-          networks = []
-          env[:vm].config.vm.networks.each do |type, args|
-            # Get the normalized configuration we'll use around
-            config = send("#{type}_config", args)
-
-            # Get the virtualbox adapter configuration
-            adapter = send("#{type}_adapter", config)
-            adapters << adapter
-
-            # Get the network configuration
-            network = send("#{type}_network_config", config)
-            network[:_auto_config] = true if config[:auto_config]
-            networks << network
-          end
-
-          if !adapters.empty?
-            # Automatically assign an adapter number to any adapters
-            # that aren't explicitly set.
-            @logger.debug("Assigning adapter locations...")
-            assign_adapter_locations(adapters)
-
-            # Verify that our adapters are good just prior to enabling them.
-            verify_adapters(adapters)
-
-            # Create all the network interfaces
-            @logger.info("Enabling adapters...")
-            env[:ui].info I18n.t("vagrant.actions.vm.network.preparing")
-            env[:vm].driver.enable_adapters(adapters)
-          end
-
-          # Continue the middleware chain. We're done with our VM
-          # setup until after it is booted.
-          @app.call(env)
-
-          if !adapters.empty? && !networks.empty?
-            # Determine the interface numbers for the guest.
-            assign_interface_numbers(networks, adapters)
-
-            # Configure all the network interfaces on the guest. We only
-            # want to configure the networks that have `auto_config` setup.
-            networks_to_configure = networks.select { |n| n[:_auto_config] }
-            env[:ui].info I18n.t("vagrant.actions.vm.network.configuring")
-            env[:vm].guest.configure_networks(networks_to_configure)
-          end
-        end
-
-        # This method assigns the adapter to use for the adapter.
-        # e.g. it says that the first adapter is actually on the
-        # virtual machine's 2nd adapter location.
-        #
-        # It determines the adapter numbers by simply finding the
-        # "next available" in each case.
-        #
-        # The adapters are modified in place by adding an ":adapter"
-        # field to each.
-        def assign_adapter_locations(adapters)
-          available  = Set.new(1..8)
-
-          # Determine which NICs are actually available.
-          interfaces = @env[:vm].driver.read_network_interfaces
-          interfaces.each do |number, nic|
-            # Remove the number from the available NICs if the
-            # NIC is in use.
-            available.delete(number) if nic[:type] != :none
-          end
-
-          # Based on the available set, assign in order to
-          # the adapters.
-          available = available.to_a.sort
-          @logger.debug("Available NICs: #{available.inspect}")
-          adapters.each do |adapter|
-            # Ignore the adapters that already have been assigned
-            if !adapter[:adapter]
-              # If we have no available adapters, then that is an exceptional
-              # event.
-              raise Errors::NetworkNoAdapters if available.empty?
-
-              # Otherwise, assign as the adapter the next available item
-              adapter[:adapter] = available.shift
-            end
-          end
-        end
-
-        # Verifies that the adapter configurations look good. This will
-        # raise an exception in the case that any errors occur.
-        def verify_adapters(adapters)
-          # Verify that there are no collisions in the adapters being used.
-          used = Set.new
-          adapters.each do |adapter|
-            raise Errors::NetworkAdapterCollision if used.include?(adapter[:adapter])
-            used.add(adapter[:adapter])
-          end
-        end
-
-        # Assigns the actual interface number of a network based on the
-        # enabled NICs on the virtual machine.
-        #
-        # This interface number is used by the guest to configure the
-        # NIC on the guest VM.
-        #
-        # The networks are modified in place by adding an ":interface"
-        # field to each.
-        def assign_interface_numbers(networks, adapters)
-          current = 0
-          adapter_to_interface = {}
-
-          # Make a first pass to assign interface numbers by adapter location
-          vm_adapters = @env[:vm].driver.read_network_interfaces
-          vm_adapters.sort.each do |number, adapter|
-            if adapter[:type] != :none
-              # Not used, so assign the interface number and increment
-              adapter_to_interface[number] = current
-              current += 1
-            end
-          end
-
-          # Make a pass through the adapters to assign the :interface
-          # key to each network configuration.
-          adapters.each_index do |i|
-            adapter = adapters[i]
-            network = networks[i]
-
-            # Figure out the interface number by simple lookup
-            network[:interface] = adapter_to_interface[adapter[:adapter]]
-          end
-        end
-
-        def hostonly_config(args)
-          ip      = args[0]
-          options = args[1] || {}
-
-          # Determine if we're dealing with a static IP or a DHCP-served IP.
-          type    = ip == :dhcp ? :dhcp : :static
-
-          # Default IP is in the 20-bit private network block for DHCP based networks
-          ip = "172.28.128.1" if type == :dhcp
-
-          options = {
-            :type    => type,
-            :ip      => ip,
-            :netmask => "255.255.255.0",
-            :adapter => nil,
-            :mac     => nil,
-            :name    => nil,
-            :auto_config => true
-          }.merge(options)
-
-          # Verify that this hostonly network wouldn't conflict with any
-          # bridged interfaces
-          verify_no_bridge_collision(options)
-
-          # Get the network address and IP parts which are used for many
-          # default calculations
-          netaddr  = network_address(options[:ip], options[:netmask])
-          ip_parts = netaddr.split(".").map { |i| i.to_i }
-
-          # Calculate the adapter IP, which we assume is the IP ".1" at the
-          # end usually.
-          adapter_ip    = ip_parts.dup
-          adapter_ip[3] += 1
-          options[:adapter_ip] ||= adapter_ip.join(".")
-
-          if type == :dhcp
-            # Calculate the DHCP server IP, which is the network address
-            # with the final octet + 2. So "172.28.0.0" turns into "172.28.0.2"
-            dhcp_ip    = ip_parts.dup
-            dhcp_ip[3] += 2
-            options[:dhcp_ip] ||= dhcp_ip.join(".")
-
-            # Calculate the lower and upper bound for the DHCP server
-            dhcp_lower    = ip_parts.dup
-            dhcp_lower[3] += 3
-            options[:dhcp_lower] ||= dhcp_lower.join(".")
-
-            dhcp_upper    = ip_parts.dup
-            dhcp_upper[3] = 254
-            options[:dhcp_upper] ||= dhcp_upper.join(".")
-          end
-
-          # Return the hostonly network configuration
-          return options
-        end
-
-        def hostonly_adapter(config)
-          @logger.debug("Searching for matching network: #{config[:ip]}")
-          interface = find_matching_hostonly_network(config)
-
-          if !interface
-            @logger.debug("Network not found. Creating if we can.")
-
-            # It is an error case if a specific name was given but the network
-            # doesn't exist.
-            if config[:name]
-              raise Errors::NetworkNotFound, :name => config[:name]
-            end
-
-            # Otherwise, we create a new network and put the net network
-            # in the list of available networks so other network definitions
-            # can use it!
-            interface = create_hostonly_network(config)
-            @logger.debug("Created network: #{interface[:name]}")
-          end
-
-          if config[:type] == :dhcp
-            # Check that if there is a DHCP server attached on our interface,
-            # then it is identical. Otherwise, we can't set it.
-            if interface[:dhcp]
-              valid = interface[:dhcp][:ip] == config[:dhcp_ip] &&
-                interface[:dhcp][:lower] == config[:dhcp_lower] &&
-                interface[:dhcp][:upper] == config[:dhcp_upper]
-
-              raise Errors::NetworkDHCPAlreadyAttached if !valid
-
-              @logger.debug("DHCP server already properly configured")
-            else
-              # Configure the DHCP server for the network.
-              @logger.debug("Creating a DHCP server...")
-              @env[:vm].driver.create_dhcp_server(interface[:name], config)
-            end
-          end
-
-          return {
-            :adapter     => config[:adapter],
-            :type        => :hostonly,
-            :hostonly    => interface[:name],
-            :mac_address => config[:mac],
-            :nic_type    => config[:nic_type]
-          }
-        end
-
-        def hostonly_network_config(config)
-          return {
-            :type       => config[:type],
-            :adapter_ip => config[:adapter_ip],
-            :ip         => config[:ip],
-            :netmask    => config[:netmask]
-          }
-        end
-
-        # Creates a new hostonly network that matches the network requested
-        # by the given host-only network configuration.
-        def create_hostonly_network(config)
-          # Create the options that are going to be used to create our
-          # new network.
-          options = config.dup
-          options[:ip] = options[:adapter_ip]
-
-          @env[:vm].driver.create_host_only_network(options)
-        end
-
-        # Finds a host only network that matches our configuration on VirtualBox.
-        # This will return nil if a matching network does not exist.
-        def find_matching_hostonly_network(config)
-          this_netaddr = network_address(config[:ip], config[:netmask])
-
-          @env[:vm].driver.read_host_only_interfaces.each do |interface|
-            if config[:name] && config[:name] == interface[:name]
-              return interface
-            elsif this_netaddr == network_address(interface[:ip], interface[:netmask])
-              return interface
-            end
-          end
-
-          nil
-        end
-
-        # Verifies that a host-only network subnet would not collide with
-        # a bridged networking interface.
-        #
-        # If the subnets overlap in any way then the host only network
-        # will not work because the routing tables will force the traffic
-        # onto the real interface rather than the virtualbox interface.
-        def verify_no_bridge_collision(options)
-          this_netaddr = network_address(options[:ip], options[:netmask])
-
-          @env[:vm].driver.read_bridged_interfaces.each do |interface|
-            that_netaddr = network_address(interface[:ip], interface[:netmask])
-            raise Errors::NetworkCollision if this_netaddr == that_netaddr && interface[:status] != "Down"
-          end
-        end
-
-        def bridged_config(args)
-          options = args[0] || {}
-          options = {} if !options.is_a?(Hash)
-
-          return {
-            :adapter => nil,
-            :mac     => nil,
-            :bridge  => nil,
-            :auto_config => true,
-            :use_dhcp_assigned_default_route => false
-          }.merge(options)
-        end
-
-        def bridged_adapter(config)
-          # Find the bridged interfaces that are available
-          bridgedifs = @env[:vm].driver.read_bridged_interfaces
-          bridgedifs.delete_if { |interface| interface[:status] == "Down" }
-
-          # The name of the chosen bridge interface will be assigned to this
-          # variable.
-          chosen_bridge = nil
-
-          if config[:bridge]
-            @logger.debug("Bridge was directly specified in config, searching for: #{config[:bridge]}")
-
-            # Search for a matching bridged interface
-            bridgedifs.each do |interface|
-              if interface[:name].downcase == config[:bridge].downcase
-                @logger.debug("Specific bridge found as configured in the Vagrantfile. Using it.")
-                chosen_bridge = interface[:name]
-                break
-              end
-            end
-
-            # If one wasn't found, then we notify the user here.
-            if !chosen_bridge
-              @env[:ui].info I18n.t("vagrant.actions.vm.bridged_networking.specific_not_found",
-                                    :bridge => config[:bridge])
-            end
-          end
-
-          # If we still don't have a bridge chosen (this means that one wasn't
-          # specified in the Vagrantfile, or the bridge specified in the Vagrantfile
-          # wasn't found), then we fall back to the normal means of searchign for a
-          # bridged network.
-          if !chosen_bridge
-            if bridgedifs.length == 1
-              # One bridgable interface? Just use it.
-              chosen_bridge = bridgedifs[0][:name]
-              @logger.debug("Only one bridged interface available. Using it by default.")
-            else
-              # More than one bridgable interface requires a user decision, so
-              # show options to choose from.
-              @env[:ui].info I18n.t("vagrant.actions.vm.bridged_networking.available",
-                                    :prefix => false)
-              bridgedifs.each_index do |index|
-                interface = bridgedifs[index]
-                @env[:ui].info("#{index + 1}) #{interface[:name]}", :prefix => false)
-              end
-
-              # The range of valid choices
-              valid = Range.new(1, bridgedifs.length)
-
-              # The choice that the user has chosen as the bridging interface
-              choice = nil
-              while !valid.include?(choice)
-                choice = @env[:ui].ask("What interface should the network bridge to? ")
-                choice = choice.to_i
-              end
-
-              chosen_bridge = bridgedifs[choice - 1][:name]
-            end
-          end
-
-          @logger.info("Bridging adapter #{config[:adapter]} to #{chosen_bridge}")
-
-          # Given the choice we can now define the adapter we're using
-          return {
-            :adapter     => config[:adapter],
-            :type        => :bridged,
-            :bridge      => chosen_bridge,
-            :mac_address => config[:mac],
-            :nic_type    => config[:nic_type]
-          }
-        end
-
-        def bridged_network_config(config)
-          return {
-            :type => :dhcp,
-            :use_dhcp_assigned_default_route => config[:use_dhcp_assigned_default_route]
-          }
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/nfs.rb b/lib/vagrant/action/vm/nfs.rb
deleted file mode 100644
index 8aa81d31b..000000000
--- a/lib/vagrant/action/vm/nfs.rb
+++ /dev/null
@@ -1,196 +0,0 @@
-require 'digest/md5'
-require 'fileutils'
-require 'pathname'
-
-require 'log4r'
-
-module Vagrant
-  module Action
-    module VM
-      # Enables NFS based shared folders. `nfsd` must already be installed
-      # on the host machine, and NFS client must already be installed on
-      # the guest machine.
-      #
-      # This is a two part process:
-      #
-      #   1. Adds an entry to `/etc/exports` on the host machine using
-      #      the host class to export the proper folder to the proper
-      #      machine.
-      #   2. After boot, runs `mount` on the guest to mount the shared
-      #      folder.
-      #
-      class NFS
-        def initialize(app,env)
-          @logger = Log4r::Logger.new("vagrant::action::vm::nfs")
-          @app = app
-          @env = env
-
-          verify_settings if nfs_enabled?
-        end
-
-        def call(env)
-          @env = env
-
-          extract_folders
-
-          if !folders.empty?
-            prepare_folders
-            export_folders
-          end
-
-          @app.call(env)
-
-          mount_folders if !folders.empty?
-        end
-
-        # Returns the folders which are to be synced via NFS.
-        def folders
-          @folders ||= {}
-        end
-
-        # Removes the NFS enabled shared folders from the configuration,
-        # so they will no longer be mounted by the actual shared folder
-        # task.
-        def extract_folders
-          # Load the NFS enabled shared folders
-          @folders = {}
-          @env[:vm].config.vm.shared_folders.each do |key, opts|
-            if opts[:nfs]
-              # Duplicate the options, set the hostpath, and set disabled on the original
-              # options so the ShareFolders middleware doesn't try to mount it.
-              folder = opts.dup
-              hostpath = Pathname.new(opts[:hostpath]).expand_path(@env[:root_path])
-
-              if !hostpath.directory? && opts[:create]
-                # Host path doesn't exist, so let's create it.
-                @logger.debug("Host path doesn't exist, creating: #{hostpath}")
-
-                begin
-                  FileUtils.mkpath(hostpath)
-                rescue Errno::EACCES
-                  raise Errors::SharedFolderCreateFailed, :path => hostpath.to_s
-                end
-              end
-
-              # Set the hostpath now that it exists.
-              folder[:hostpath] = hostpath.to_s
-
-              # Assign the folder to our instance variable for later use
-              @folders[key] = folder
-
-              # Disable the folder so that regular shared folders don't try to
-              # mount it.
-              opts[:disabled] = true
-            end
-          end
-        end
-
-        # Prepares the settings for the NFS folders, such as setting the
-        # options on the NFS folders.
-        def prepare_folders
-          @folders = @folders.inject({}) do |acc, data|
-            key, opts = data
-            opts[:map_uid] = prepare_permission(:uid, opts)
-            opts[:map_gid] = prepare_permission(:gid, opts)
-            opts[:nfs_version] ||= 3
-
-            # The poor man's UUID. An MD5 hash here is sufficient since
-            # we need a 32 character "uuid" to represent the filesystem
-            # of an export. Hashing the host path is safe because two of
-            # the same host path will hash to the same fsid.
-            opts[:uuid]    = Digest::MD5.hexdigest(opts[:hostpath])
-
-            acc[key] = opts
-            acc
-          end
-        end
-
-        # Prepares the UID/GID settings for a single folder.
-        def prepare_permission(perm, opts)
-          key = "map_#{perm}".to_sym
-          return nil if opts.has_key?(key) && opts[key].nil?
-
-          # The options on the hash get priority, then the default
-          # values
-          value = opts.has_key?(key) ? opts[key] : @env[:vm].config.nfs.send(key)
-          return value if value != :auto
-
-          # Get UID/GID from folder if we've made it this far
-          # (value == :auto)
-          stat = File.stat(opts[:hostpath])
-          return stat.send(perm)
-        end
-
-        # Uses the host class to export the folders via NFS. This typically
-        # involves adding a line to `/etc/exports` for this VM, but it is
-        # up to the host class to define the specific behavior.
-        def export_folders
-          @env[:ui].info I18n.t("vagrant.actions.vm.nfs.exporting")
-          @env[:host].nfs_export(@env[:vm].uuid, guest_ip, folders)
-        end
-
-        # Uses the system class to mount the NFS folders.
-        def mount_folders
-          @env[:ui].info I18n.t("vagrant.actions.vm.nfs.mounting")
-
-          # Only mount the folders which have a guest path specified
-          mount_folders = {}
-          folders.each do |name, opts|
-            if opts[:guestpath]
-              mount_folders[name] = opts.dup
-            end
-          end
-
-          @env[:vm].guest.mount_nfs(host_ip, mount_folders)
-        end
-
-        # Returns the IP address of the first host only network adapter
-        #
-        # @return [String]
-        def host_ip
-          @env[:vm].driver.read_network_interfaces.each do |adapter, opts|
-            if opts[:type] == :hostonly
-              @env[:vm].driver.read_host_only_interfaces.each do |interface|
-                if interface[:name] == opts[:hostonly]
-                  return interface[:ip]
-                end
-              end
-            end
-          end
-
-          nil
-        end
-
-        # Returns the IP address of the guest by looking at the first
-        # enabled host only network.
-        #
-        # @return [String]
-        def guest_ip
-          @env[:vm].config.vm.networks.each do |type, args|
-            if type == :hostonly && args[0].is_a?(String)
-              return args[0]
-            end
-          end
-
-          nil
-        end
-
-        # Checks if there are any NFS enabled shared folders.
-        def nfs_enabled?
-          @env[:vm].config.vm.shared_folders.each do |key, opts|
-            return true if opts[:nfs]
-          end
-
-          false
-        end
-
-        # Verifies that the host is set and supports NFS.
-        def verify_settings
-          raise Errors::NFSHostRequired if @env[:host].nil?
-          raise Errors::NFSNotSupported if !@env[:host].nfs?
-          raise Errors::NFSNoHostNetwork if !guest_ip
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/provision.rb b/lib/vagrant/action/vm/provision.rb
deleted file mode 100644
index 56be8a8e6..000000000
--- a/lib/vagrant/action/vm/provision.rb
+++ /dev/null
@@ -1,61 +0,0 @@
-require "log4r"
-
-module Vagrant
-  module Action
-    module VM
-      class Provision
-        def initialize(app, env)
-          @logger = Log4r::Logger.new("vagrant::action::vm::provision")
-          @app = app
-
-          env["provision.enabled"] = true if !env.has_key?("provision.enabled")
-        end
-
-        def call(env)
-          @env = env
-
-          provisioners = nil
-
-          # We set this here so that even if this value is changed in the future,
-          # it stays constant to what we expect here in this moment.
-          enabled = env["provision.enabled"]
-          # Instantiate and prepare the provisioners. Preparation must happen here
-          # so that shared folders and such can properly take effect.
-          provisioners = enabled_provisioners
-          provisioners.map { |p| p.prepare }
-
-          @app.call(env)
-
-          if enabled
-            # Take prepared provisioners and run the provisioning
-            provisioners.each do |instance|
-              @env[:ui].info I18n.t("vagrant.actions.vm.provision.beginning",
-                                    :provisioner => instance.class)
-              instance.provision!
-            end
-          end
-        end
-
-        def enabled_provisioners
-          enabled = []
-          @env[:vm].config.vm.provisioners.each do |provisioner|
-            if @env["provision.types"]
-              # If we've specified types of provisioners to enable, then we
-              # only use those provisioners, and skip any that we haven't
-              # specified.
-              if !@env["provision.types"].include?(provisioner.shortcut.to_s)
-                @logger.debug("Skipping provisioner: #{provisioner.shortcut}")
-                next
-              end
-            end
-
-            enabled << provisioner.provisioner.new(@env, provisioner.config)
-          end
-
-          # Return the enable provisioners
-          enabled
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/provisioner_cleanup.rb b/lib/vagrant/action/vm/provisioner_cleanup.rb
deleted file mode 100644
index 1c5b2f0e6..000000000
--- a/lib/vagrant/action/vm/provisioner_cleanup.rb
+++ /dev/null
@@ -1,26 +0,0 @@
-module Vagrant
-  module Action
-    module VM
-      class ProvisionerCleanup
-        def initialize(app, env)
-          @app = app
-          @env = env
-        end
-
-        def call(env)
-          enabled_provisioners.each do |instance|
-            instance.cleanup
-          end
-
-          @app.call(env)
-        end
-
-        def enabled_provisioners
-          @env[:vm].config.vm.provisioners.map do |provisioner|
-            provisioner.provisioner.new(@env, provisioner.config)
-          end
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/prune_nfs_exports.rb b/lib/vagrant/action/vm/prune_nfs_exports.rb
deleted file mode 100644
index b8b3b3061..000000000
--- a/lib/vagrant/action/vm/prune_nfs_exports.rb
+++ /dev/null
@@ -1,20 +0,0 @@
-module Vagrant
-  module Action
-    module VM
-      class PruneNFSExports
-        def initialize(app, env)
-          @app = app
-        end
-
-        def call(env)
-          if env[:host]
-            valid_ids = env[:vm].driver.read_vms
-            env[:host].nfs_prune(valid_ids)
-          end
-
-          @app.call(env)
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/sane_defaults.rb b/lib/vagrant/action/vm/sane_defaults.rb
deleted file mode 100644
index f2dd31ab9..000000000
--- a/lib/vagrant/action/vm/sane_defaults.rb
+++ /dev/null
@@ -1,78 +0,0 @@
-require "log4r"
-
-module Vagrant
-  module Action
-    module VM
-      # This middleware enforces some sane defaults on the virtualbox
-      # VM which help with performance, stability, and in some cases
-      # behavior.
-      class SaneDefaults
-        def initialize(app, env)
-          @logger = Log4r::Logger.new("vagrant::action::vm::sanedefaults")
-          @app = app
-        end
-
-        def call(env)
-          # Set the env on an instance variable so we can access it in
-          # helpers.
-          @env = env
-
-          # Enable the host IO cache on the sata controller. Note that
-          # if this fails then its not a big deal, so we don't raise any
-          # errors. The Host IO cache vastly improves disk IO performance
-          # for VMs.
-          command = [
-            "storagectl", env[:vm].uuid,
-            "--name", "SATA Controller",
-            "--hostiocache", "on"
-          ]
-          attempt_and_log(command, "Enabling the Host I/O cache on the SATA controller...")
-
-          enable_dns_proxy = true
-          begin
-            contents = File.read("/etc/resolv.conf")
-
-            if contents =~ /^nameserver 127\.0\.0\.1$/
-              # The use of both natdnsproxy and natdnshostresolver break on
-              # Ubuntu 12.04 that uses resolvconf with localhost. When used
-              # VirtualBox will give the client dns server 10.0.2.3, while
-              # not binding to that address itself. Therefore disable this
-              # feature if host uses the resolvconf server 127.0.0.1
-              @logger.info("Disabling DNS proxy since resolv.conf contains 127.0.0.1")
-              enable_dns_proxy = false
-            end
-          rescue Errno::ENOENT; end
-
-          # Enable/disable the NAT DNS proxy as necessary
-          if enable_dns_proxy
-            command = [
-              "modifyvm", env[:vm].uuid,
-              "--natdnsproxy1", "on"
-            ]
-            attempt_and_log(command, "Enable the NAT DNS proxy on adapter 1...")
-          else
-            command = [ "modifyvm", env[:vm].uuid, "--natdnsproxy1", "off" ]
-            attempt_and_log(command, "Disable the NAT DNS proxy on adapter 1...")
-            command = [ "modifyvm", env[:vm].uuid, "--natdnshostresolver1", "off" ]
-            attempt_and_log(command, "Disable the NAT DNS resolver on adapter 1...")
-          end
-
-          @app.call(env)
-        end
-
-        protected
-
-        # This is just a helper method that executes a single command, logs
-        # the given string to the log, and also includes the exit status in
-        # the log message.
-        #
-        # @param [Array] command Command to run
-        # @param [String] log Log message to write.
-        def attempt_and_log(command, log)
-          result = @env[:vm].driver.execute_command(command)
-          @logger.info("#{log} (exit status = #{result.exit_code})")
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/setup_package_files.rb b/lib/vagrant/action/vm/setup_package_files.rb
deleted file mode 100644
index f45210707..000000000
--- a/lib/vagrant/action/vm/setup_package_files.rb
+++ /dev/null
@@ -1,54 +0,0 @@
-require 'pathname'
-
-module Vagrant
-  module Action
-    module VM
-      # Sets up the mapping of files to copy into the package and verifies
-      # that the files can be properly copied.
-      class SetupPackageFiles
-        def initialize(app, env)
-          @app = app
-
-          env["package.include"] ||= []
-          env["package.vagrantfile"] ||= nil
-        end
-
-        def call(env)
-          files = {}
-          env["package.include"].each do |file|
-            source = Pathname.new(file)
-            dest   = nil
-
-            # If the source is relative then we add the file as-is to the include
-            # directory. Otherwise, we copy only the file into the root of the
-            # include directory. Kind of strange, but seems to match what people
-            # expect based on history.
-            if source.relative?
-              dest = source
-            else
-              dest = source.basename
-            end
-
-            # Assign the mapping
-            files[file] = dest
-          end
-
-          if env["package.vagrantfile"]
-            # Vagrantfiles are treated special and mapped to a specific file
-            files[env["package.vagrantfile"]] = "_Vagrantfile"
-          end
-
-          # Verify the mapping
-          files.each do |from, _|
-            raise Errors::PackageIncludeMissing, :file => from if !File.exist?(from)
-          end
-
-          # Save the mapping
-          env["package.files"] = files
-
-          @app.call(env)
-        end
-      end
-    end
-  end
-end
diff --git a/lib/vagrant/action/vm/share_folders.rb b/lib/vagrant/action/vm/share_folders.rb
deleted file mode 100644
index 29dc4ccf8..000000000
--- a/lib/vagrant/action/vm/share_folders.rb
+++ /dev/null
@@ -1,114 +0,0 @@
-require 'pathname'
-
-require 'log4r'
-
-module Vagrant
-  module Action
-    module VM
-      class ShareFolders
-        def initialize(app, env)
-          @logger = Log4r::Logger.new("vagrant::action::vm::share_folders")
-          @app    = app
-        end
-
-        def call(env)
-          @env = env
-
-          prepare_folders
-          create_metadata
-
-          @app.call(env)
-
-          mount_shared_folders
-        end
-
-        # This method returns an actual list of VirtualBox shared
-        # folders to create and their proper path.
-        def shared_folders
-          @env[:vm].config.vm.shared_folders.inject({}) do |acc, data|
-            key, value = data
-
-            next acc if value[:disabled]
-
-            # This to prevent overwriting the actual shared folders data
-            value = value.dup
-            acc[key] = value
-            acc
-          end
-        end
-
-        # Prepares the shared folders by verifying they exist and creating them
-        # if they don't.
-        def prepare_folders
-          shared_folders.each do |name, options|
-            hostpath = Pathname.new(options[:hostpath]).expand_path(@env[:root_path])
-
-            if !hostpath.directory? && options[:create]
-              # Host path doesn't exist, so let's create it.
-              @logger.debug("Host path doesn't exist, creating: #{hostpath}")
-
-              begin
-                hostpath.mkpath
-              rescue Errno::EACCES
-                raise Errors::SharedFolderCreateFailed, :path => hostpath.to_s
-              end
-            end
-          end
-        end
-
-        def create_metadata
-          @env[:ui].info I18n.t("vagrant.actions.vm.share_folders.creating")
-
-          folders = []
-          shared_folders.each do |name, data|
-            folders << {
-              :name => name,
-              :hostpath => File.expand_path(data[:hostpath], @env[:root_path]),
-              :transient => data[:transient]
-            }
-          end
-
-          @env[:vm].driver.share_folders(folders)
-        end
-
-        def mount_shared_folders
-          @env[:ui].info I18n.t("vagrant.actions.vm.share_folders.mounting")
-
-          # short guestpaths first, so we don't step on ourselves
-          folders = shared_folders.sort_by do |name, data|
-            if data[:guestpath]
-              data[:guestpath].length
-            else
-              # A long enough path to just do this at the end.
-              10000
-            end
-          end
-
-          # Go through each folder and mount
-          folders.each do |name, data|
-            if data[:guestpath]
-              # Guest path specified, so mount the folder to specified point
-              @env[:ui].info(I18n.t("vagrant.actions.vm.share_folders.mounting_entry",
-                                    :name => name,
-                                    :guest_path => data[:guestpath]))
-
-              # Dup the data so we can pass it to the guest API
-              data = data.dup
-
-              # Calculate the owner and group
-              data[:owner] ||= @env[:vm].config.ssh.username
-              data[:group] ||= @env[:vm].config.ssh.username
-
-              # Mount the actual folder
-              @env[:vm].guest.mount_shared_folder(name, data[:guestpath], data)
-            else
-              # If no guest path is specified, then automounting is disabled
-              @env[:ui].info(I18n.t("vagrant.actions.vm.share_folders.nomount_entry",
-                                    :name => name))
-            end
-          end
-        end
-      end
-    end
-  end
-end