With this change, it is now possible to get rid of many deprecation
messages successively introduced in Ansible 1.9, and 2.0. More
interesting, the generated inventory will contain the recommended
variable names (e.g. `ansible_host` instead of `ansible_ssh_host`)
when the compatibility mode is set to '2.0'.
Details:
- Add `compatibility_mode` option to control the Ansible parameters
format to be used. The value corresponds to the minimal version
supported. For the moment, possible values are '1.8' (corresponding to
Vagrant's former behaviour) or '2.0'.
Note that a dynamic inventory generated in compatibility mode '2.0'
is not supported by Ansible 1.x. On the other hand, Ansible 2.x so far
supports inventory format generated by the compatibility mode '1.8'.
- Add compatibility mode auto-detection, based on the available Ansible
version. This is the default behaviour in order to bring a maximum of
user friendliness. The drawback of this approach is to let potential
compatibility breaking risks, for `ansible` provisioner setups that
already integrate Ansible 2.x **AND** rely on the existence of
the generated `_ssh` variable names. Thanks to the vagrant warnings
(and its release notes), I argue that it is worth to offer
auto-detection by default, which offers a sweet transition to most
users.
- Add `become`, `become_user` and `ask_become_pass` options and their
backwards compatible aliases. The legacy options are now deprecated.
Note that we intentionally didn't provide a '1.9' compatibility mode,
as it would add extra-complexity for practically no added-value.
To my knowledge, the Ansible 2.x series haven't introduced yet any major
changes or deprecations that would motivate to introduce a higher
version compatibility mode (to be confirmed/verified).
Resolve GH-6570
Still Pending:
- Optimization: Reduce the number of `ansible` command executions.
Currently two exec calls will be performed when the compatibility
mode auto-detection is enabled (i.e. by default). We could make the
provisioner a little bit smarter to only execute `ansible` only once
in any situation (by combining "presence" and "version" checks).
- User-friendliness: Add better validator on `compatibility_mode`
option, and shows a warning or an error instead of the silent
fallback on the auto-detection modus.
- Test coverage: All the added behaviours are not fully covered yet.
Prior to this commit, if you set up multiple folders to export with NFS
on linux with the exact same hostpath, the template used to write
/etc/exports would end up placing the same path with the same IP in
/etc/exports and cause an error preventing the folders from being
properly mounted. This commit fixes that by first looking at which
folders are being exported and if there are any duplicates. If so,
remove the duplicates and only export 1 hostpath folder. If these
duplicate folders have differing nfs linux options, an exception must be
thrown because we cannot assume which options the user intended to
export with.
The patterns "all" is a special keyword that target all hosts in the
inventory. Therefore it makes sense to accept "all:vars" as a group
variable name. Note that "*:vars" pattern is not valid in an Ansible
inventory.
See http://docs.ansible.com/ansible/latest/intro_patterns.html#patternsFix#7730
This commit aligns how the file provisioner should work on all host
machines. It ensures that a `/.` is only applied if the user intended
to upload a folder to a destination under a different name. It ensures
that if uploading to a windows guest with a different destination folder
name, it does not nest the source folder under that name so that it
works the same as it does on linux platforms. It also updates the
behavior of the winrm upload communicator by allowing an array of paths
to be uploaded instead of a single file or folder to allow for this new
functionality for windows guests.
This commit introduces the salt_arg option that allows a user to pass
additional command line flags to the `salt` tool when provisioning with
a master setup.
It also adds additional config validation to ensure that both
`salt_args` and `salt_call_args` is an array.
Prior to this commit, if the ssh-config command was invoked within
cygwin or msys2, it would show a regular windows style path for private
keys rather than a path that could be used within msys2 or cygwin. This
commit updates that behavior by converting all of the private key paths
to the proper msys2 or cygwin path if the platform is windows and the
command was invoked from one of those two shells.
Prior to this commit, when the guest capability attempted to expand a
path with spaces it would quote the path passed in. However if the path
also had a relative path those quotes would end up making `printf`
ignore it and not properly expand the path fully. This commit updates
that to first escape the quotes of a path and then pass in the new path
to be expanded.
Prior to this commit, when using a global id to bring up a vagrant vm,
vagrant would fail during the "install provider" step due to the fact
that the global vagrant machine was not configured for the local vagrant
environment. Since this global vm exists elsewhere, we disable the
install provider step so that vagrant can just bring up the global
vagrant machine.
Prior to this commit, there was no way to add additional ssh arguments
within a Vagrantfile for a given vagrant machine. This commit introduces
a new option extra_args that allows users to pass in a single argument
or an array of flags that will be added onto the ssh command.
Prior to this commit, the `vagrant validate` command would only validate
the first machine in a vagrant file. This commit improves that by
validating all known machines in the environment. If one is not found,
it will properly throw an exception instead of a stacktrace.
Prior to this commit, if a user passed in a script that was frozen,
the shell provisioner would fail to modify the script to replace line
endings for windows because the string was immutable. This commit fixes
that by dup'ing the string so that it can have its line endings replaced
Prior to this commit, if a user set the `destination` path to include a
space, the `shell_expand_guest_path` function would remove that space
and return a partial path. This commit updates that to quote the path to
be expanded to preserve the entire path.
Prior to this commit, if a file provisioner block was ran twice with a
folder on a remote host, due to how scp works, it would first copy over
that folder, and then on the second action it would copy an identical
folder nested within the first one. While this is 'intended' behavior
with scp, it is unexpected behavior for the file provisioner. This
commit updates the file provisioner to first ensure that the directory
to be copied exists on the remote host prior to copying, and then the
destination dir has been changed to the directory that the destination
will be copied to, rather than the exact directly that includes the
folder from the host to prevent the nested folder behavior.
This adds a prompt for a token description, which is now supported in
Vagrant Cloud. Pressing enter on the prompt uses the default description
of `"Vagrant login"`.
$ vagrant login
In a moment we will ask for your username and password to HashiCorp's
Vagrant Cloud. After authenticating, we will store an access token locally on
disk. Your login details will be transmitted over a secure connection, and
are never stored on disk locally.
If you do not have an Vagrant Cloud account, sign up at
https://www.vagrantcloud.com
Vagrant Cloud Username: justincampbell
Password (will be hidden):
Token description (Defaults to "Vagrant login"):
You are now logged in.
$
Which created a token with the default description of "Vagrant login":
Entering a description:
Token description (Defaults to "Vagrant login"): Justin's MacBook Pro
Prior to this commit, if a state was reached where the action_box_add
command needed a force flag, it would fail requesting the user to
provide that flag to override adding a new box. However that flag did
not exist on the box update command, and could not be passed onto the
action_box_add action. This commit updates that to include a force flag,
and if used, pass that value onto the action_box_add action.
Prior to this commit, because of how the bootstrap salt shell file
worked, if github could not be resolved, the installer script would fail
silently with an exit code 0 because `sh` would evalute without any
errors and the curl exit code would be ignored. This commit splits out
the installer to first attempt to save the bash installer, and if it
exists, execute it.
Powershell helper script now returns error when guest IP address
cannot be discovered. When reading addresses from a network
device both IPv4 and IPv6 are stored and the IPv4 address has
precedence on returned address.
When preparing the NFS settings on VirtualBox the guest IP addresses
are pulled from VirtualBox directly and any static addresses are
pulled as well. This can lead to aquiring a host IP and machine IP
but results in a failure of NFS mount because the IPs are not on
the same network. This filters the machine IP result to validate
it is within the host adapter IP range.
Prior to this commit, the puppet provisioner would use the manifest dir
flag when running `puppet apply`. Not only is this flag redundant due to
how puppet apply works, but it is also deprecated in Puppet 4 and
removed in Puppet 5. This commit simply removes the flag when invoking
`puppet apply`.
Prior to this commit, rsync-auto would not properly rsync realtive dirs
outside the cwd if defined in the Vagrantfile. This commit updates that
to ensure that the command looks at the Vagrant config to ensure that
folder was intended to be rsync'd to the machine even if outside the
current working dir.
Prior to this commit, when users invoked the `rsync-auto` command using
the docker provider with boot2docker, vagrant would rsync all known
containers using the boot2docker vm rather than the current working dir.
This commit updates that behavior to ensure that only the current
working dirs vagrant machines will be rsynced.
* ALT Linux platforms is an original rpm based distribution
forked as Mandrake Russian Edition Spring at 2001 year
* Distributions of ALT Linux use etcnet (https://www.altlinux.org/Etcnet) as
internal network configuration system needs for configure_networks support
Prior to this commit, if a user attempted to configure
`/etc/default/docker` through vagrant prior to installation, the package
manager would not override an existing configuration and installing
docker would then fail. This commit fixes this by introducing a
`post_install_provisioner` that allows users to define a provisioner
block that will run after docker has been installed, allowing users to
configure `/etc/default/docker` how they want.
This commit adds a variety of fixes for SmartOS guest support:
- Host name setting now works in the global zone and in non-global zones
- NFS now works in the global zone and the non-global zone.
- Tests are updated and moved to the (apparently) more modern style
This commit allows the user to configure two additional options that
were previously not configurable: Compression and DSAAuthentication.
Each config option is set as a boolean, and if left out of the config
will default to its previous behavior which is included and set to
"yes". If the user explicitly sets it to false, it will not be included
as an ssh option.
While neither the FreeBSD provisioner nor the SUSE provisioner support
installing Ansible using pip their ansible_install methods still get
called with that fourth argument. The result being these errors when
Vagrant tries to install Ansible.
/opt/vagrant/embedded/gems/gems/vagrant-1.9.5/plugins/provisioners/ansible/cap/guest/freebsd/ansible_install.rb:10:in `ansible_install': wrong number of arguments (4 for 3) (ArgumentError)
/opt/vagrant/embedded/gems/gems/vagrant-1.9.5/plugins/provisioners/ansible/cap/guest/suse/ansible_install.rb:9:in `ansible_install': wrong number of arguments (4 for 3) (ArgumentError)
The Arch provider, it too without pip support, already catches the
pip_args argument this way.
Prior to this commit, Vagrant had no way internally to determine if a
provisioner object was unique if the `name` property was not set.
Because of this, when vagrant went to merge configs it would duplicate
an existing unnamed provisioner since it had no way of determining if a
user actually had added the same provisioner twice. This commit fixes
that by introducing an id which will default to `name` if its set, but
if not will be set by `SecureRandom.uuid`.
Prior to this commit, the ssh communicator would use the default cipher
list in Net::SSH to negociate which ciphers it should use between hosts.
Due to a bug in Net::SSH and the position of the `none` cipher in its
default cipher list, if a host supported the none cipher, but also
only supported other ciphers that came after none in the default list,
it would accept none and attempt to use that cipher instead of the other
supported ciphers. This commit fixes that behavior by copying the
default cipher list from Net::SSH and placing none last in the list so
that other ciphers can be used in the negotiation before attempting to
use the unsecure none cipher.
This commit adds some better handling around the snapshot restore and
delete commands for the virtualbox provider. If a user attempts to restore from
a vm that does not exist, instead of exiting 0 it will raise an
exception saying the virtual machine has not been created yet.
Addtionally, if a user attempts to restore from a snapshot id that does
not exist, instead of printing a complicated exception from the
virtualbox cli tool, it prints a more useful error message telling the
user that the snapshot does not exist.
Prior to this commit, if a user ran the `vagrant ssh -c CMD` command, it
would not allow the user to configure pseudo-terminal allocation. This
commit introduces a -t flag for the `vagrant ssh` command which defaults
to true if not specified.
This commit adds/changes the following for SmartOS guests:
- modifies the "Halt" capability to use /usr/sbin/poweroff in preference
to /usr/sbin/shutdown with parameters, and modifies the associated
test.
- adds an "InsertPublicKey" capability and tests.
- adds a "RemovePublicKey" capability and tests.
With this commit applied, the vast majority of typical Vagrant workflow
is available to SmartOS global zone guests (provided NFS mounts are used
rather than VMWare shared folders).
Prior to this commit, if a user attempted to use the `vagrant snapshot
save` or `vagrant snapshot list` commands on a vm whose provider did not
support snapshots, it would simply print a warning. This commit changes
that behavior by instead raising an error.
Prior to this commit, the vagrant snapshot plugin would save snapshots
with existing names which lead to duplicate snapshot names being saved.
This commit fixes that by checking to see if the given snapshot name
already exists and if so, fails telling the user the given snapshot name
already exists. If a user passes a --force flag, vagrant will first
delete the existing snapshot, and take a new one with the given name.
Before the patch this error will happen if the original directory already exists
-------------------------------------------------------------------------------------------------
==> windows: Rsyncing folder: /vhosts/oxfamshop.com.au/ => /cygdrive/c/inetpub/wwwroot
==> windows: - Exclude: [".vagrant/", ".git/", "target/", "node_modules/"]
==> windows: Showing rsync output...
The following SSH command responded with a non-zero exit status.
Vagrant assumes that this means the command failed!
mkdir '/cygdrive/c/inetpub/wwwroot'
Stdout from the command:
Stderr from the command:
mkdir: cannot create directory ‘/cygdrive/c/inetpub/wwwroot’: File exists
-------------------------------------------------------------------------------------------------
After the patch, this is result
-------------------------------------------------------------------------------------------------
==> windows: Rsyncing folder: /vhosts/oxfamshop.com.au/ => /cygdrive/c/inetpub/wwwroot
==> windows: - Exclude: [".vagrant/", ".git/", "target/", "node_modules/"]
==> windows: Showing rsync output...
==> windows: rsync[stdout] -> sending incremental file list
==> windows: rsync[stdout] ->
==> windows: rsync[stdout] -> sent 500855 bytes received 6635 bytes 78075.38 bytes/sec
==> windows: rsync[stdout] -> total size is 175357552 speedup is 345.54
-------------------------------------------------------------------------------------------------
Enables proper setup of VMs started from within WSL rootfs paths. Updates
setup for Windows access when working within the WSL to auto-detect settings
instead of relying on user defined environment variables.
This makes the behavior of the docker and hyperv provider consistent with the
virtualbox provider by raising an error on ssh actions if the machine is not
created or not running.
Fixes#8508
Reduce the total number of commands run to configure interfaces. If
a service reload/restart is required, only execute it once instead
of once per device. When nm is managing a device, the explicit up
is not required.
Properly detects NetworkManager on guest as well as devices controlled
by NetworkManager. Provides configuration option to enable/disbale
NetworkManager control on devices.
Fix the error
```homestead-7: Creating and registering the VM...
An error occurred while executing a PowerShell script. This error
is shown below. Please read the error message and see if this is
a configuration error with your system. If it is not, then please
report a bug.
Script: import_vm_vmcx.ps1
Error:
At C:\Program Files
(x86)\HashiCorp\Vagrant\embedded\gems\gems\vagrant-1.9.4\plugins\providers\hyper v\scripts\import_vm_vmcx.ps1:18 char:37
+ [string]$differencing_disk=$null
+ ~
Missing ')' in function parameter list.
At C:\Program Files
(x86)\HashiCorp\Vagrant\embedded\gems\gems\vagrant-1.9.4\plugins\providers\hyper v\scripts\import_vm_vmcx.ps1:20 char:1
+ )
+ ~
Unexpected token ')' in expression or statement.
+ CategoryInfo : ParserError: (:) [], ParseException
+ FullyQualifiedErrorId : MissingEndParenthesisInFunctionParameterList
```
In some cases the SSH connection may be aborted while waiting
for setup. This includes aborted connections in the list of
applicable exceptions to retry on while waiting for the connection
to become available.
Fixes#8520
Prevent sending empty data strings to defined blocks handling
stderr and stdout output. These can occur when the garbage
marker is identified and collected data pruned, but no remaining
data is left to send.
Fixes#8259
With the introduction of `pip_args` option, you can easily extend the
`:pip` installation mode behaviour. But some interesting/advanced usages
are still not possible because of the auto-generated parts ("ansible"
package, version selection, and the `--upgrade` flag).
By adding this "pip_args_only" install mode, it will be for instance
possible to:
- install unofficial releases, like release candidates published at
https://releases.ansible.com/
- install more pip packages (e.g. via a `requirements.txt` file), with
hash validation, etc.
Note that there is no config validation that requires `pip_args` option
to be defined when the :pip_args_only mode is selected. This would be
more elegant, and user friendly to raise a configuration error, but this
can wait. At least, running with an empty `pip_args` won't lead to any
command crash, since the rather dummy "pip install" shows an helper
notice and terminates with a zero (0) exit code.
This change is thought as a complement to the changes originally
proposed in pull request GH-8170.
With this new option, it is now possible to pass additional arguments to
pip command when the `install_mode` is "pip".
(@gildegoma reworded the original commit message of pull request GH-8170)
Issue #8159
while using:
$ vagrant package --base ${VIRTUALBOXNAME}
this error occurs:
/usr/share/rubygems-integration/all/gems/vagrant-1.9.0/plugins/commands/package/command.rb:59:in `package_base': uninitialized constant VagrantPlugins::CommandPackage::Command::SecureRandom (NameError)
Did you mean? SecureRandom
from /usr/share/rubygems-integration/all/gems/vagrant-1.9.0/plugins/commands/package/command.rb:42:in `execute'
from /usr/share/rubygems-integration/all/gems/vagrant-1.9.0/lib/vagrant/cli.rb:42:in `execute'
from /usr/share/rubygems-integration/all/gems/vagrant-1.9.0/lib/vagrant/environment.rb:274:in `cli'
from /usr/share/rubygems-integration/all/gems/vagrant-1.9.0/bin/vagrant:118:in `<top (required)>'
from /usr/bin/vagrant:22:in `load'
from /usr/bin/vagrant:22:in `<main>'
`/etc/init.d/network restart` already restart NM and shutdown interfaces.
In start() :
```
if [ "$(LANG=C nmcli -t --fields running general status 2>/dev/null)" = "running" ]; then
nmcli connection reload
fi
```
In stop() :
```
for i in $vpninterfaces $xdslinterfaces $bridgeinterfaces $vlaninterfaces $remaining; do
unset DEVICE TYPE
(. ./ifcfg-$i
if [ -z "$DEVICE" ] ; then DEVICE="$i"; fi
if ! check_device_down $DEVICE; then
action $"Shutting down interface $i: " ./ifdown $i boot
[ $? -ne 0 ] && rc=1
fi
)
done
```
Where $remaining include all "others" interfaces including eth*
This reverts commit 166d10d4e1.
RHEL-7 / Current Fedora versions tend to use NetworkManager for
configuring the networks, and `service network restart` might fail.
If the `NetworkManager` service is running, we should restart it,
otherwise we try restarting `network`.
Allows checksum validation on downloaded files via Util::Downloader
using MD5 and/or SHA1 checksums. This also integrates checksum validation
support with the shell provisioner for downloaded remote files.
Usage: vagrant box prune [options]
Options:
-p, --provider PROVIDER The specific provider type for the boxes to destroy.
-n, --dry-run Only print the boxes that would be removed.
--name NAME The specific box name to check for outdated versions.
-f, --force Destroy without confirmation even when box is in use.
-h, --help Print this help
If a `name` is specified as an option, it will be used as the id instead
of inferring it from the `guestpath`. If `guestpath` is nil, the `name`
needs to be specified so the folder can be mounted with a name.
This also fixes the synced folder code to allow `guestpath` to be nil.
It was allowed in a previous version for the purpose of preventing a
directory from being auto mounted (#936), but seems to have become an
error at some point after that.
An example of modifying the default /vagrant folder so it doesn't
auto-mount anymore:
config.vm.synced_folder ".", nil, name: "/vagrant"
An example of sharing another folder, but not auto-mounting it:
config.vm.synced_folder ".", nil, name: "foobar"
Fixes#6835.
The `pkg_add` command will return `0` when a package requested for
installation is not found. This adds a validation check to ensure
the rsync package is actually installed on the guest.
When configuring network devices force NetworkManager to reload new
configuration files as they appear. This prevents NetworkManager from
attempting to continue managing devices on initial start up.
With this new option defined, the `ansible-galaxy` and
`ansible-playbook` commands generated by the Ansible provisioners will
be executed with the ANSIBLE_CONFIG environment variable set
accordingly.
Resolve GH-7195
This commit also fix the following open issues:
- Implement the pending RSpec examples about path existence checks
performed by the ansible (remote) provisioner.
- In verbose mode, the ansible remote provisioner now correctly displays
the Ansible Galaxy parameters ("role_file" and "roles_path") with
single quotes (which is safer for potential copy-paste usage).
Additional Notes:
- Test coverage for `ansible_local` provisioner is still not
implemented. See GH-6633.
- Test coverage for galaxy from host is not implemented yet (due to
general issue with mocking both command executions, see
https://github.com/mitchellh/vagrant/pull/6529#r45278451
It was failing to create files below the machines\default\hyperv folder, rather it was creating folders named 'hypervSnapshots', 'hypervVirtual Hard Disks', and 'hypervVirtual Machines'. This was causing the files to not be removed when destroying the vm, and an error when subsequently bringing it up again.
/etc/issue is far from being a reliable source for OS detection as it
can be changed by a user without affecting any OS functionality. As
newer Debian systems run systemd by default, check for /etc/os-release
and fallback to lsb_release for older Debian versions. Check #7625 for
a similar issue. Even lsb_release is not manatory, therefore keep the
current code of parsing /etc/issue to avoid regressions.
- Remove `ansible-galaxy` detection, since this command was introduced
in Ansible 1.4.2 (December 2013). Checking for `ansible-playbook`
presence should therefore be enough for any "modern" Ansible setup.
- Look for the command defined by the new `playbook_command` option.
Related to GH-7881 and GH-7536
Note that error messages were not adapted, and only mention
a generic "Ansible Software" when executed commands are failing.
We assume that people using the `playbook_command` option are
advanced users that will know all the components to be considered.
Add failing networking interface list sorting test with example
provided by #7883. Update sorting logic to properly handle different
types and differing array lengths.
Fixes#7883
The ansible-playbook command is currently hardcoded for the ansible and
ansible_local provisioners. This patch adds the config option
playbook_command to allow the user to change the command.
Implemented the differencing disk for vmcx.
This means the disk is now copied by Hyper-V (Powershell) instead of Ruby for new machines.
This does mean EFI Firmware now does work for machines since it is quite a feep copy. Compare-VM will report incompatibilities should they be found.
Changes introduced in #7207 removed the logic to handle the
`minion_id` configuration. This commit addresses that regression
by including the `--id #{@config.minion_id}` flag everywhere that
`--local` is used (as it had done before).
I'm not totally in love with the `get_masterless` abstraction here,
so if someone has a better suggestion I'll happily change it.
Fixes#7454
- Honour `ssh.proxy_command` setting (even when the Docker provider is
used via a proxy host). Silly configurations may lead to silly
behaviors, but let's apply the settings...
- Remove condition on `provider_config.connect_via_ssh`, which is
a provider specific parameter (from vagrant-libvirt provider).
- Add a simple unit test
Changes introduced in 982af05 caused the RDP configuration file to be written
with all settings on one line instead of one setting per line. The Microsoft
Remote Desktop client for OS X rejects these configuration files as being
malformed. This patch restores the configuration to one line per setting and
adds tests to guard against regression.
Fixes#7629.
nfs-server.service seems to load kernel modules it needs itself, while nfsd appears in `/proc/filesystems` only after the kernel module has been loaded, so vagrant fails to detect NFS server until it's started first time after the system has booted. This checks if the NFS service actually exists and hopes that it'll figure the stuff out itself.
`list-unit-files` is utilized rather than `list-units` because systemd seems to not list units that are disabled: https://lists.fedoraproject.org/pipermail/devel/2011-November/159117.html
BSD-based guests do not support VirtualBox shared folders. This is a
common source of confusion in Vagrant. This new error clearly explains
that this is not a bug in Vagrant and provides instructions on how to
disable them.
lsb_release command is included in lsb-release package. Sometimes this is
not installed; ex: Docker official Ubuntu image.
/etc/os-release is included in base-files package,
so this is more reliable than lsb_release.
Use the version of Hyper-V instead of Powershell to determine which
exception is thrown by Get-VM. Also fixing an invalid catch statement,
since Powershell can not use variables to match thrown exceptions in
catch.
This adds a new environmental variable `VAGRANT_BOX_UPDATE_CHECK_DISABLE`,
which instructs Vagrant to not check for box updates when running
regular Vagrant commands. This behaves the same as the existing
`config.vm.box_update_check` configuration option, but can be set
globally. Vagrantfile-supplied options will take precedence.
Fixes GH-7479
The change to this file 10 days ago removed a newline character at the end of each key added to it. This mean that when another key was added, it continued on the same line as the one before and thus wasn't being detected when an ssh connection came in with a key file.
With regards to https://github.com/mitchellh/vagrant/issues/7455 this is an (ugly) fix.
I'm sure someone knows a better command to concat a file and a string and append it to the `authorized_keys` file. But this does fix the problem.
This commit include the following changes:
- systematically set ANSIBLE_ROLES_PATH environment variable when
galaxy_roles_path is defined.
- slightly refactor to introduce the concept of "provisioning working
directory" (possible usage in the future for resolving GH-7195)
- fix a bug in ansible-galaxy execution by the ansible_local provisioner
if the paths contains blank characters.
Fix#7269
These changes have been validated against the following guest systems:
- Debian 7 and 8
- Ubuntu 12.04, 14.04 and 16.04
- Fedora 21 and 23
- CentOS 7
- OracleLinux 7
- Scientific Linux 7
At the moment, the pip setup (via get-pip.py script) is not working for
RHEL6-like systems (CentOS 6.6, OracleLinux 6.5, Scientific Linux 6),
because Python 2.6 has been deprecated and is no longer supported by
Python core team. I consider this limitation with low priority in
Vagrant context.
The `:pip` install_mode is currently not implemented for the following
platforms:
- OpenSUSE
- ArchLinux
- FreeBSD
Known Issue: By using get-pip.py script, any previous pip installation
will be most probably overrided. This could be an issue for Python
developers who would prefer to keep their base box setup untouched. In
future iteration, it could be possible to choose to reinstall/upgrade
pip or not. issue for Python developers who would prefer to keep their
base box setup untouched. In future iteration, it could be possible to
choose to reinstall/upgrade pip or not.
Resolve GH-6654
Resolve GH-7167 as the `version` option is now considered to select the
version of Ansible to be installed.
Currently the code tries to detect if Arch uses systemd via checking
comm= of PID 1. As access to proc filesystem might be restricted due to
hideproc set and systemd is default for all Arch Linux installations
since October 2012, let's just ditch that check.
Gilles Cornu
Brian Cain
Justin Campbell
Jonathan LaBroad
Dimitrios Kouzis-Loukas
Peter Parkkali
Chris Roberts
Chris Roberts
Rui Lopes
Taliesin Sisson
Artem Sidorenko
Eugenio Marzo
Max Khon
Tomoyuki Sakurai
Evgeny Sinelnikov
Caleb Marble
James Nugent
Yufan Lou
Richard Gareau
Andreas Olsson
Richard Mayes
Harry Weppner
Tim Aslat
Brian Dwyer
Arjan Weurding
Dafydd Jones
Martin Nowak
BJ Dierkes
Anand Suresh
Mikhail Zholobov
knbnnate
Gökhan Şengün
Simon Detheridge
James Carr
Bjorn Brala
Patrick Lang
Tobias
Hasyimi Bahrudin
Paul Stengel
Satoshi Matsumoto
Raymond P. Burkholder
Michaël Faille
Matt Wrock
Alvaro Miranda Aguilera
ephemeralsnow
Bryce Shurts
Latchezar Tzvetkoff
jklippel
Jonathan A. Sternberg
Aurelien Pupier
Aron Griffis
Azul
Brian Retford
Jake Ballard
Reto Gantenbein
Daniel Gonzalez
Mark Peek
guessi
Theron Boerner
David Wittman
Rutger Swarts
Dmitry Vasilets
Rudinei Goi Roecker
Alexander von Gluck IV
AJ
Zack Train
Charlie Sharpsteen
tfanning
Jose Luis Duran
Seth Vargo
Alexander Kurilo
hendrenj
Colin Shea
Indrek Ardel
Hanno Heinrichs
Yuya.Nishida
Rory Plaire
Jonathan
James Wilson
Eugene Zamriy
Torsten Juergeleit
Renat Zaripov
Bartłomiej Piotrowski
