en: vagrant: boot_completed: |- Machine booted and ready! boot_waiting: |- Waiting for machine to boot. This may take a few minutes... cfengine_bootstrapping: |- Bootstrapping CFEngine with policy server: %{policy_server}... cfengine_bootstrapping_policy_hub: |- Performing additional bootstrap for policy hubs... cfengine_cant_autodetect_ip: |- Vagrant was unable to automatically detect the IP address of the running machine to use as the policy server address. Please specify the policy server address manually, or verify that the networks are configured properly internally. cfengine_cant_detect: |- Vagrant doesn't support detecting whether CFEngine is installed for the guest OS running in the machine. Vagrant will assume it is installed and attempt to continue. cfengine_detected_ip: |- Detected policy server IP address: %{address}... cfengine_installing: |- Installing CFEngine onto machine... cfengine_installing_files_path: |- Copying the 'files_path' files... cfengine_no_bootstrap: |- CFEngine doesn't require bootstrap. Not bootstrapping. cfengine_single_run: |- CFEngine running in "single run" mode. Will execute one file. cfengine_single_run_execute: |- Executing run file for CFEngine... chef_client_cleanup_failed: |- Cleaning up the '%{deletable}' for Chef failed. The stdout and stderr are shown below. Vagrant will continue destroying the machine, so please clean up these resources manually. stdout: %{stdout} stderr: %{stderr} chef_config_knife_not_found: |- The `knife` application was not found! This is required by Vagrant to automatically delete Chef nodes and clients. chef_run_list_empty: |- Warning: Chef run list is empty. This may not be what you want. provisioner_cleanup: |- Running cleanup tasks for '%{name}' provisioner... cfengine_config: classes_array: |- The 'classes' configuration must be an array. files_path_not_directory: |- The 'files_path' must point to a valid directory. invalid_mode: |- The mode must be 'bootstrap' or 'single_run' policy_server_address: |- The policy server address must be set for bootstrapping. run_file_not_found: |- The 'run_file' specified could not be found. virtualbox: config: id_in_pre_import: |- The ':id' parameter is not available in "pre-import" customizations. intnet_on_bad_type: |- VirtualBox internal networks can only be enabled on "private_networks" invalid_event: |- %{event} is not a valid event for customization. Valid events are: %{valid_events} general: batch_unexpected_error: |- An unexpected error ocurred when executing the action on the '%{machine}' machine. Please report this as a bug: %{message} batch_vagrant_error: |- An error occurred while executing the action on the '%{machine}' machine. Please handle this error then try again: %{message} config_upgrade_messages: |- There were warnings and/or errors while loading your Vagrantfile for the machine '%{name}'. Your Vagrantfile was written for an earlier version of Vagrant, and while Vagrant does the best it can to remain backwards compatible, there are some cases where things have changed significantly enough to warrant a message. These messages are shown below. %{output} moving_home_dir: "Moving old Vagrant home directory to new location: %{directory}" home_dir_migration_failed: |- Both an old and new Vagrant home directory exist. Only the new one will be used. Please merge the old directory into the new directory if you'd like to use the old data as well. Old: %{old} New: %{new} in_bundler: |- You appear to be running Vagrant in a Bundler environment. Because Vagrant should be run within installers (outside of Bundler), Vagrant will assume that you're developing plugins and will change its behavior in certain ways to better assist plugin development. not_in_installer: |- You appear to be running Vagrant outside of the official installers. Note that the installers are what ensure that Vagrant has all required dependencies, and Vagrant assumes that these dependencies exist. By running outside of the installer environment, Vagrant may not function properly. To remove this warning, install Vagrant using one of the official packages from vagrantup.com. upgraded_v1_dotfile: |- A Vagrant 1.0.x state file was found for this environment. Vagrant has gone ahead and auto-upgraded this to the latest format. Everything should continue working as normal. Beware, however, that older versions of Vagrant may no longer be used with this environment. However, in case anything went wrong, the old dotfile was backed up to the location below. If everything is okay, it is safe to remove this backup. Backup: %{backup_path} #------------------------------------------------------------------------------- # Translations for exception classes #------------------------------------------------------------------------------- errors: active_machine_with_different_provider: |- An active machine was found with a different provider. Vagrant currently allows each machine to be brought up with only a single provider at a time. A future version will remove this limitation. Until then, please destroy the existing machine to up with a new provider. Machine name: %{name} Active provider: %{active_provider} Requested provider: %{requested_provider} ansible_failed: |- Ansible failed to complete successfully. Any error output should be visible above. Please fix these errors and try again. ansible_playbook_app_not_found: |- The "ansible-playbook" program could not be found! Please verify that "ansible-playbook" is available on the PATH of your host system, and try again. If you haven't installed Ansible yet, please install Ansible on your system. Vagrant can't do this for you in a safe, automated way. Please see ansible.cc for more info. base_vm_not_found: The base VM with the name '%{name}' was not found. batch_multi_error: |- An error occurred while executing multiple actions in parallel. Any errors that occurred are shown below. %{message} boot_bad_state: |- The guest machine entered an invalid state while waiting for it to boot. Valid states are '%{valid}'. The machine is in the '%{invalid}' state. Please verify everything is configured properly and try again. If the provider you're using has a GUI that comes with it, it is often helpful to open that and watch the machine, since the GUI often has more helpful error messages than Vagrant can retrieve. For example, if you're using VirtualBox, run `vagrant up` while the VirtualBox GUI is open. boot_timeout: |- Timed out while waiting for the machine to boot. This means that Vagrant was unable to communicate with the guest machine within the configured ("config.vm.boot_timeout" value) time period. This can mean a number of things. If you're using a custom box, make sure that networking is properly working and you're able to connect to the machine. It is a common problem that networking isn't setup properly in these boxes. Verify that authentication configurations are also setup properly, as well. If the box appears to be booting properly, you may want to increase the timeout ("config.vm.boot_timeout") value. box_checksum_invalid_type: |- The specified checksum type is not supported by Vagrant: %{type}. Vagrant supports the following checksum types: md5, sha1, sha256 box_checksum_mismatch: |- The checksum of the dowloaded box did not match the expected value. Please verify that you have the proper URL setup and that you're downloading the proper file. Expected: %{expected} Received: %{actual} box_config_changing_box: |- While loading the Vagrantfile, the provider override specified a new box. This box, in turn, specified a different box. This isn't allowed, as it could lead to infinite recursion of Vagrant configuration loading. Please fix this. box_metadata_corrupted: |- The metadata associated with the box '%{name}' appears corrupted. This is most often caused by a disk issue or system crash. Please remove the box, re-add it, and try again. box_metadata_file_not_found: |- The "metadata.json" file for the box '%{name}' was not found. Boxes require this file in order for Vagrant to determine the provider it was made for. If you made the box, please add a "metadata.json" file to it. If someone else made the box, please notify the box creator that the box is corrupt. Documentation for box file format can be found at the URL below: http://docs.vagrantup.com/v2/boxes/format.html box_not_found: Box '%{name}' with '%{provider}' provider could not be found. box_provider_doesnt_match: |- The box you attempted to add doesn't match the provider you specified. Provider expected: %{expected} Provider of box: %{actual} box_upgrade_required: |- The box '%{name}' is still stored on disk in the Vagrant 1.0.x format. This box must be upgraded in order to work properly with this version of Vagrant. cfengine_bootstrap_failed: |- Failed to bootstrap CFEngine. Please see the output above to see what went wrong and address the issue. cfengine_install_failed: |- After installing CFEngine, Vagrant still can't detect a proper CFEngine installation. Please verify that CFEngine was properly installed, as the installation may have failed. cfengine_not_installed: |- CFEngine appears to not be installed on the guest machine. Vagrant can attempt to install CFEngine for you if you set the "install" setting to "true", but this setting was not set. Please install CFEngine on the guest machine or enable the "install" setting for Vagrant to attempt to install it for you. cli_invalid_options: |- An invalid option was specified. The help for this command is available below. %{help} cli_invalid_usage: |- This command was not invoked properly. The help for this command is available below. %{help} command_unavailable: |- The executable '%{file}' Vagrant is trying to run was not found in the PATH variable. This is an error. Please verify this software is installed and on the path. command_unavailable_windows: |- The executable '%{file}' Vagrant is trying to run was not found in the %PATH% variable. This is an error. Please verify this software is installed and on the path. config_invalid: |- There are errors in the configuration of this machine. Please fix the following errors and try again: %{errors} config_upgrade_errors: |- Because there were errors upgrading your Vagrantfiles, Vagrant can no longer continue. Please fix the errors above and try again. copy_private_key_failed: |- Vagrant failed to copy the default insecure private key into your home directory. This is usually caused by a permissions error. Please make sure the permissions of the source is readable and the destination is writable. Source: %{source} Destination: %{destination} destroy_requires_force: |- Destroy doesn't have a TTY to ask for confirmation. Please pass the `--force` flag to force a destroy, otherwise attach a TTY so that the destroy can be confirmed. dotfile_is_directory: |- The local file Vagrant uses to store data ".vagrant" already exists and is a directory! If you are in your home directory, then please run this command in another directory. If you aren't in a home directory, then please rename ".vagrant" to something else, or configure Vagrant to use another filename by modifying `config.vagrant.dotfile_name`. dotfile_upgrade_json_error: |- A Vagrant 1.0.x local state file was found. Vagrant is able to upgrade this to the latest format automatically, however various checks are put in place to verify data isn't incorrectly deleted. In this case, the old state file was not valid JSON. Vagrant 1.0.x would store state as valid JSON, meaning that this file was probably tampered with or manually edited. Vagrant's auto-upgrade process cannot continue in this case. In most cases, this can be resolve by simply removing the state file. Note however though that if Vagrant was previously managing virtual machines, they may be left in an "orphan" state. That is, if they are running or exist, they'll have to manually be removed. If you're unsure what to do, ask the Vagrant mailing list or contact support. State file path: %{state_file} downloader_error: |- An error occurred while downloading the remote file. The error message, if any, is reproduced below. Please fix this error and try again. %{message} downloader_interrupted: |- The download was interrupted by an external signal. It did not complete. environment_locked: |- An instance of Vagrant is already running. Only one instance of Vagrant may run at any given time to avoid problems with VirtualBox inconsistencies occurring. Please wait for the other instance of Vagrant to end and then try again. environment_non_existent_cwd: |- The working directory for Vagrant doesn't exist! This is the specified working directory: %{cwd} forward_port_adapter_not_found: |- The adapter to attach a forwarded port to was not found. Please verify that the given adapter is setup on the machine as a NAT interface. Host port: %{host} Guest port: %{guest} Adapter: %{adapter} gem_command_in_bundler: |- You cannot run the `vagrant plugin` command while in a bundler environment. This should generally never happen unless Vagrant is installed outside of the official installers or another gem is wrongly attempting to use Vagrant internals directly. Please properly install Vagrant to fix this. If this error persists, please contact support. guest_capability_invalid: |- The registered guest capability '%{cap}' for the detected guest OS '%{guest}' is invalid. The capability does not implement the proper method. This is a bug with Vagrant or the plugin that implements this capability. Please report a bug. guest_capability_not_found: |- Vagrant attempted to execute the capability '%{cap}' on the detect guest OS '%{guest}', but the guest doesn't support that capability. This capability is required for your configuration of Vagrant. Please either reconfigure Vagrant to avoid this capability or fix the issue by creating the capability. guest_not_detected: |- The guest operating system of the machine could not be detected! Vagrant requires this knowledge to perform specific tasks such as mounting shared folders and configuring networks. Please add the ability to detect this guest operating system to Vagrant by creating a plugin or reporting a bug. home_dir_not_accessible: |- The home directory you specified is not accessible. The home directory that Vagrant uses must be both readable and writable. You specified: %{home_path} interrupted: |- Vagrant exited after cleanup due to external interrupt. local_data_dir_not_accessible: |- The directory Vagrant will use to store local environment-specific state is not accessible. The directory specified as the local data directory must be both readable and writable for the user that is running Vagrant. Local data directory: %{local_data_path} linux_mount_failed: |- Failed to mount folders in Linux guest. This is usually beacuse the "vboxsf" file system is not available. Please verify that the guest additions are properly installed in the guest and can work properly. The command attempted was: %{command} linux_nfs_mount_failed: |- Mounting NFS shared folders failed. This is most often caused by the NFS client software not being installed on the guest machine. Please verify that the NFS client software is properly installed, and consult any resources specific to the linux distro you're using for more information on how to do this. linux_shell_expand_failed: |- Vagrant failed to determine the shell expansion of the guest path for one of your shared folders. This is an extremely rare error case and most likely indicates an unusual configuration of the guest system. Please report a bug with your Vagrantfile. machine_guest_not_ready: |- Guest-specific operations were attempted on a machine that is not ready for guest communication. This should not happen and a bug should be reported. machine_not_found: |- The machine with the name '%{name}' was not found configured for this Vagrant environment. machine_state_invalid: |- An internal error has occurred! The provider of the machine you're trying to work with reported an invalid state. This is a bug with the provider you're using, and not with Vagrant itself or with any configuration you may have done. Please report this bug to the proper location. multi_vm_required: |- A multi-vm environment is required for name specification to this command. multi_vm_target_required: |- This command requires a specific VM name to target in a multi-VM environment. nfs_cant_read_exports: |- Vagrant can't read your current NFS exports! The exports file should be readable by any user. This is usually caused by invalid permissions on your NFS exports file. Please fix them and try again. nfs_no_guest_ip: |- No guest IP was given to the Vagrant core NFS helper. This is an internal error that should be reported as a bug. nfs_no_host_ip: |- No host IP was given to the Vagrant core NFS helper. This is an internal error that should be reported as a bug. nfs_no_hostonly_network: |- NFS requires a host-only network with a static IP to be created. Please add a host-only network with a static IP to the machine for NFS to work. no_default_synced_folder_impl: |- No synced folder implementation is available for your synced folders! Please consult the documentation to learn why this may be the case. You may force a synced folder implementation by specifying a "type:" option for the synced folders. Available synced folder implementations are listed below. %{types} no_env: |- A Vagrant environment is required to run this command. Run `vagrant init` to set one up in this directory, or change to a directory with a Vagrantfile and try again. plugin_gem_error: |- An error occurred within RubyGems, the underlying system used to manage Vagrant plugins. The output of the errors are shown below: %{output} plugin_install_bad_entry_point: |- Attempting to load the plugin '%{name}' failed, because the entry point doesn't exist. The entry point attempted was '%{entry_point}'. If this is not correct, please manually specify an `--entry-point` when installing the plugin. plugin_install_license_not_found: |- The license file to install could not be found. Please verify the path you gave is correct. The path to the license file given was: '%{path}' plugin_install_not_found: |- The plugin '%{name}' could not be found in local or remote repositories. Please check the name of the plugin and try again. plugin_load_error: |- The plugin "%{plugin}" could not be found. Please make sure that it is properly installed via `vagrant plugin`. Note that plugins made for Vagrant 1.0.x are not compatible with 1.1+ and this error will likely continue to show when you use `plugin install` with a 1.0.x plugin. plugin_load_failed: |- Failed to load the "%{plugin}" plugin. View logs for more details. plugin_load_failed_with_output: |- Failed to load the "%{plugin}" plugin. The output from loading the plugin is shown below. View the logs for complete details. stdout: %{stdout} stderr: %{stderr} plugin_not_found: |- The plugin '%{name}' could not be found. Please install this plugin prior to attempting to do anything with it. plugin_not_installed: |- The plugin '%{name}' is not installed. Please install it first. port_collision_resume: |- This VM cannot be resumed, because the forwarded ports would collide with a running program (it could be another virtual machine). Normally, Vagrant will attempt to fix this for you but VirtualBox only allows forwarded ports to change if the VM is powered off. Therefore, please reload your VM or stop the other program to continue. provider_not_found: |- The provider '%{provider}' could not be found, but was requested to back the machine '%{machine}'. Please use a provider that exists. provisioner_flag_invalid: |- '%{name}' is not a known provisioner. Please specify a valid provisioner. scp_permission_denied: |- Failed to upload a file to the guest VM via SCP due to a permissions error. This is normally because the user running Vagrant doesn't have read permission on the file. Please set proper permissions on the file: %{path} scp_unavailable: |- SSH server on the guest doesn't support SCP. Please install the necessary software to enable SCP on your guest operating system. shared_folder_create_failed: |- Failed to create the following shared folder on the host system. This is usually because Vagrant does not have sufficient permissions to create the folder. %{path} Please create the folder manually or specify another path to share. ssh_authentication_failed: |- SSH authentication failed! This is typically caused by the public/private keypair for the SSH user not being properly set on the guest VM. Please verify that the guest VM is setup with the proper public key, and that the private key path for Vagrant is setup properly as well. ssh_bad_exit_status: |- The following SSH command responded with a non-zero exit status. Vagrant assumes that this means the command failed! %{command} Stdout from the command: %{stdout} Stderr from the command: %{stderr} ssh_connect_eacces: |- SSH is getting permission denied errors when attempting to connect to the IP for SSH. This is usually caused by network rules and not being able to connect to the specified IP. Please try changing the IP on which the guest machine binds to for SSH. ssh_connection_refused: |- SSH connection was refused! This usually happens if the VM failed to boot properly. Some steps to try to fix this: First, try reloading your VM with `vagrant reload`, since a simple restart sometimes fixes things. If that doesn't work, destroy your VM and recreate it with a `vagrant destroy` followed by a `vagrant up`. If that doesn't work, contact a Vagrant maintainer (support channels listed on the website) for more assistance. ssh_connection_reset: |- SSH connection was reset! This usually happens when the machine is taking too long to reboot. First, try reloading your machine with `vagrant reload`, since a simple restart sometimes fixes things. If that doesn't work, destroy your machine and recreate it with a `vagrant destroy` followed by a `1vagrant up`. If that doesn't work, contact support. ssh_connection_timeout: |- Vagrant timed out while attempting to connect via SSH. This usually means that the VM booted, but there are issues with the SSH configuration or network connectivity issues. Please try to `vagrant reload` or `vagrant up` again. ssh_disconnected: |- The SSH connection was unexpectedly closed by the remote end. This usually indicates that SSH within the guest machine was unable to properly start up. Please boot the VM in GUI mode to check whether it is booting properly. ssh_no_route: |- While attempting to connect with SSH, a "no route to host" (EHOSTUNREACH) error was received. Please verify your network settings are correct and try again. ssh_host_down: |- While attempting to connect with SSH, a "host is down" (EHOSTDOWN) error was received. Please verify your SSH settings are correct and try again. ssh_is_putty_link: |- The `ssh` executable found in the PATH is a PuTTY Link SSH client. Vagrant is only compatible with OpenSSH SSH clients. Please install an OpenSSH SSH client or manually SSH in using your existing client using the information below. Host: %{host} Port: %{port} Username: %{username} Private key: %{key_path} ssh_key_bad_owner: |- The private key to connect to the machine via SSH must be owned by the user running Vagrant. This is a strict requirement from SSH itself. Please fix the following key to be owned by the user running Vagrant: %{key_path} ssh_key_bad_permissions: |- The private key to connect to this box via SSH has invalid permissions set on it. The permissions of the private key should be set to 0600, otherwise SSH will ignore the key. Vagrant tried to do this automatically for you but failed. Please set the permissions on the following file to 0600 and then try running this command again: %{key_path} ssh_key_type_not_supported: |- The private key you're attempting to use with this Vagrant box uses an unsupported encryption type. The SSH library Vagrant uses does not support this key type. Please use `ssh-rsa` or `ssh-dss` instead. Note that sometimes keys in your ssh-agent can interfere with this as well, so verify the keys are valid there in addition to standard file paths. ssh_not_ready: |- The provider for this Vagrant-managed machine is reporting that it is not yet ready for SSH. Depending on your provider this can carry different meanings. Make sure your machine is created and running and try again. Additionally, check the output of `vagrant status` to verify that the machine is in the state that you expect. If you continue to get this error message, please view the documentation for the provider you're using. ssh_port_not_detected: |- Vagrant couldn't determine the SSH port for your VM! Vagrant attempts to automatically find a forwarded port that matches your `config.ssh.guest_port` (default: 22) value and uses this for SSH. Alternatively, if `config.ssh.port` is set, it will use this. However, in this case Vagrant was unable to find a forwarded port that matches the guest port and `config.ssh.port` is not set! Please make sure that you have a forwarded port that goes to the configured guest port value, or specify an explicit SSH port with `config.ssh.port`. ssh_unavailable: "`ssh` binary could not be found. Is an SSH client installed?" ssh_unavailable_windows: |- `ssh` executable not found in any directories in the %PATH% variable. Is an SSH client installed? Try installing Cygwin, MinGW or Git, all of which contain an SSH client. Or use the PuTTY SSH client with the following authentication information shown below: Host: %{host} Port: %{port} Username: %{username} Private key: %{key_path} synced_folder_unusable: |- The synced folder type '%{type}' is reporting as unusable for your current setup. Please verify you have all the proper prerequisites for using this shared folder type and try again. test_key: "test value" ui_expects_tty: |- Vagrant is attempting to interface with the UI in a way that requires a TTY. Most actions in Vagrant that require a TTY have configuration switches to disable this requirement. Please do that or run Vagrant with TTY. unimplemented_provider_action: |- Vagrant attempted to call the action '%{action}' on the provider '%{provider}', but this provider doesn't support this action. This is probably a bug in either the provider or the plugin calling this action, and should be reported. vagrantfile_exists: |- `Vagrantfile` already exists in this directory. Remove it before running `vagrant init`. vagrantfile_load_error: |- There was an error loading a Vagrantfile. The file being loaded and the error message are shown below. This is usually caused by a syntax error. Path: %{path} Message: %{message} vagrantfile_syntax_error: |- There is a syntax error in the following Vagrantfile. The syntax error message is reproduced below for convenience: %{file} vagrant_version_bad: |- This Vagrant environment has specified that it requires the Vagrant version to satisfy the following version requirements: %{requirements} You are running Vagrant %{version}, which does not satisify these requirements. Please change your Vagrant version or update the Vagrantfile to allow this Vagrant version. However, be warned that if the Vagrantfile has specified another version, it probably has good reason to do so, and changing that may cause the environment to not function properly. vboxmanage_error: |- There was an error while executing `VBoxManage`, a CLI used by Vagrant for controlling VirtualBox. The command and stderr is shown below. Command: %{command} Stderr: %{stderr} vboxmanage_not_found_error: |- The "VBoxManage" command or one of its dependencies could not be found. Please verify VirtualBox is properly installed. You can verify everything is okay by running "VBoxManage --version" and verifying that the VirtualBox version is outputted. virtualbox_broken_version_040214: |- Vagrant detected you have VirtualBox 4.2.14 installed. VirtualBox 4.2.14 contains a critical bug that causes it to not work with Vagrant. VirtualBox 4.2.16+ fixes this problem. Please upgrade VirtualBox. virtualbox_invalid_version: |- Vagrant has detected that you have a version of VirtualBox installed that is not supported. Please install one of the supported versions listed below to use Vagrant: %{supported_versions} virtualbox_kernel_module_not_loaded: |- VirtualBox is complaining that the kernel module is not loaded. Please run `VBoxManage --version` or open the VirtualBox GUI to see the error message which should contain instructions on how to fix this error. virtualbox_install_incomplete: |- VirtualBox is complaining that the installation is incomplete. Please run `VBoxManage --version` to see the error message which should contain instructions on how to fix this error. virtualbox_no_room_for_high_level_network: |- There is no available slots on the VirtualBox VM for the configured high-level network interfaces. "private_network" and "public_network" network configurations consume a single network adapter slot on the VirtualBox VM. VirtualBox limits the number of slots to 8, and it appears that every slot is in use. Please lower the number of used network adapters. virtualbox_not_detected: |- Vagrant could not detect VirtualBox! Make sure VirtualBox is properly installed. Vagrant uses the `VBoxManage` binary that ships with VirtualBox, and requires this to be available on the PATH. If VirtualBox is installed, please find the `VBoxManage` binary and add it to the PATH environmental variable. vm_creation_required: |- VM must be created before running this command. Run `vagrant up` first. vm_inaccessible: |- Your VM has become "inaccessible." Unfortunately, this is a critical error with VirtualBox that Vagrant can not cleanly recover from. Please open VirtualBox and clear out your inaccessible virtual machines or find a way to fix them. vm_name_exists: |- A VirtualBox machine with the name '%{name}' already exists. Please use another name or delete the machine with the existing name, and try again. vm_no_match: |- No virtual machines matched the regular expression given. vm_not_found: |- A VM by the name of %{name} was not found. vm_not_running: |- VM must be running to open SSH connection. Run `vagrant up` to start the virtual machine. #------------------------------------------------------------------------------- # Translations for config validation errors #------------------------------------------------------------------------------- config: common: bad_field: "The following settings shouldn't exist: %{fields}" error_empty: "`%{field}` must be not be empty." chef: cookbooks_path_empty: "Must specify a cookbooks path for chef solo." environment_path_missing: |- Environment path not found: %{path} environment_path_required: |- When 'environment' is specified, you must provide 'environments_path'. cookbooks_path_missing: |- Cookbook path doesn't exist: %{path} custom_config_path_missing: |- Path specified for "custom_config_path" does not exist. server_url_empty: "Chef server URL must be populated." validation_key_path: "Validation key path must be valid path to your chef server validation key." loader: bad_v1_key: |- Unknown configuration section '%{key}'. If this section was part of a Vagrant 1.0.x plugin, note that 1.0.x plugins are incompatible with 1.1+. root: bad_key: |- Unknown configuration section '%{key}'. ssh: private_key_missing: "`private_key_path` file must exist: %{path}" vm: base_mac_invalid: "Base MAC address for eth0/NAT must be set. Contact box maintainer for more information." box_download_ca_cert_not_found: |- "box_download_ca_cert" file not found: %{path} box_missing: "A box must be specified." box_not_found: "The box '%{name}' could not be found." hostname_invalid_characters: |- The hostname set for the VM should only contain letters, numbers, hyphens or dots. It cannot start with a hyphen or dot. network_invalid: |- The network type '%{type}' is not valid. Please use 'hostonly' or 'bridged'. network_ip_invalid: |- The host only network IP '%{ip}' is invalid. network_ip_ends_one: |- The host only network IP '%{ip}' must not end in a 1, as this is reserved for the host machine. nfs_not_supported: |- It appears your machine doesn't support NFS, or there is not an adapter to enable NFS on this machine for Vagrant. Please verify that `nfsd` is installed on your machine, and try again. If you're on Windows, NFS isn't supported. If the problem persists, please contact Vagrant support. nfs_requires_host: |- Using NFS shared folders requires a host to be specified using `config.vagrant.host`. network_ip_ends_in_one: |- Static IPs cannot end in ".1" since that address is always reserved for the router. Please use another ending. network_ip_required: |- An IP is required for a private network. network_fp_host_not_unique: |- Forwarded port '%{host}' (host port) is declared multiple times with the protocol '%{protocol}'. network_fp_requires_ports: |- Forwarded port definitions require a "host" and "guest" value network_type_invalid: |- Network type '%{type}' is invalid. Please use a valid network type. provisioner_not_found: |- The '%{name}' provisioner could not be found. shared_folder_guestpath_duplicate: |- A shared folder guest path is used multiple times. Shared folders must all map to a unique guest path: %{path} shared_folder_guestpath_relative: |- The shared folder guest path must be absolute: %{path} shared_folder_hostpath_missing: |- The host path of the shared folder is missing: %{path} shared_folder_nfs_owner_group: |- Shared folder that have NFS enabled do no support owner/group attributes. Host path: %{path} shared_folder_mount_options_array: |- Shared folder mount options specified by 'mount_options' must be an array of options. #------------------------------------------------------------------------------- # Translations for commands. e.g. `vagrant x` #------------------------------------------------------------------------------- commands: common: vm_already_running: |- VirtualBox VM is already running. vm_not_created: "VM not created. Moving on..." vm_not_running: "VM is not currently running. Please, first bring it up with `vagrant up` then run this command." box: remove_must_specify_provider: |- Multiple providers were found for the box '%{name}'. Please specify the specific provider for the box you want to remove. The list of providers backing this box is: '%{providers}' To remove the box for a specific provider, run the following command, filling in PROVIDER with one of the providers above: vagrant box remove '%{name}' PROVIDER no_installed_boxes: "There are no installed boxes! Use `vagrant box add` to add some." removing: |- Removing box '%{name}' with provider '%{provider}'... destroy: confirmation: "Are you sure you want to destroy the '%{name}' VM? [y/N] " will_not_destroy: |- The VM '%{name}' will not be destroyed, since the confirmation was declined. init: success: |- A `Vagrantfile` has been placed in this directory. You are now ready to `vagrant up` your first virtual environment! Please read the comments in the Vagrantfile as well as documentation on `vagrantup.com` for more information on using Vagrant. plugin: installed_license: |- The license for '%{name}' was successfully installed! installing_license: |- Installing license for '%{name}'... no_plugins: |- No plugins installed. installed: |- Installed the plugin '%{name} (%{version})'! installing: |- Installing the '%{name}' plugin. This can take a few minutes... uninstalling: |- Uninstalling the '%{name}' plugin... post_install: |- Post install message from the '%{name}' plugin: %{message} status: aborted: |- The VM is in an aborted state. This means that it was abruptly stopped without properly closing the session. Run `vagrant up` to resume this virtual machine. If any problems persist, you may have to destroy and restart the virtual machine. gurumeditation: |- The VM is in the "guru meditation" state. This is a rare case which means that an internal error in VitualBox caused the VM to fail. This is always the sign of a bug in VirtualBox. You can try to bring your VM back online with a `vagrant up`. inaccessible: |- The VM is inaccessible! This is a rare case which means that VirtualBox can't find your VM configuration. This usually happens when upgrading VirtualBox, moving to a new computer, etc. Please consult VirtualBox for how to handle this issue. output: |- Current machine states: %{states} %{message} not_created: |- The environment has not yet been created. Run `vagrant up` to create the environment. If a machine is not created, only the default provider will be shown. So if a provider is not listed, then the machine is not created for that environment. paused: |- The VM is paused. This VM may have been paused via the VirtualBox GUI or the VBoxManage command line interface. To unpause, please use the VirtualBox GUI and/or VBoxManage command line interface so that vagrant would be able to control the VM again. poweroff: |- The VM is powered off. To restart the VM, simply run `vagrant up` running: |- The VM is running. To stop this VM, you can run `vagrant halt` to shut it down forcefully, or you can run `vagrant suspend` to simply suspend the virtual machine. In either case, to restart it again, simply run `vagrant up`. saving: |- The VM is currently saving its state. In a few moments this state should transition to "saved." Please run `vagrant status` again in a few seconds. saved: |- To resume this VM, simply run `vagrant up`. stuck: |- The VM is "stuck!" This is a very rare state which means that VirtualBox is unable to recover the current state of the VM. The only known solution to this problem is to restart your machine, sorry. listing: |- This environment represents multiple VMs. The VMs are all listed above with their current state. For more information about a specific VM, run `vagrant status NAME`. up: upping: |- Bringing machine '%{name}' up with '%{provider}' provider... version: output: "Vagrant version %{version}" #------------------------------------------------------------------------------- # Translations for Vagrant middleware acions #------------------------------------------------------------------------------- actions: runner: waiting_cleanup: "Waiting for cleanup before exiting..." exit_immediately: "Exiting immediately, without cleanup!" vm: boot: booting: Booting VM... failed_to_boot: |- Failed to connect to VM via SSH. Please verify the VM successfully booted by looking at the VirtualBox GUI. failed_to_run: |- The VM failed to remain in the "running" state while attempting to boot. This is normally caused by a misconfiguration or host system incompatibilities. Please open the VirtualBox GUI and attempt to boot the virtual machine manually to get a more informative error message. bridged_networking: available: |- Available bridged network interfaces: bridging: |- Bridging adapter #%{adapter} to '%{bridge}' enabling: |- Enabling bridged network... preparing: |- Preparing bridged networking... specific_not_found: |- Specific bridge '%{bridge}' not found. You may be asked to specify which network to bridge to. check_box: not_found: |- Box '%{name}' was not found. Fetching box from specified URL for the provider '%{provider}'. Note that if the URL does not have a box for this provider, you should interrupt Vagrant now and add the box yourself. Otherwise Vagrant will attempt to download the full box prior to discovering this error. not_specified: |- No base box was specified! A base box is required as a staring point for every vagrant virtual machine. Please specify one in your Vagrantfile using `config.vm.box` does_not_exist: |- Specified box `%{name}` does not exist! The box must be added through the `vagrant box add` command. Please view the documentation associated with the command for more information. check_guest_additions: not_detected: |- No guest additions were detected on the base box for this VM! Guest additions are required for forwarded ports, shared folders, host only networking, and more. If SSH fails on this machine, please install the guest additions and repackage the box to continue. This is not an error message; everything may continue to work properly, in which case you may ignore this message. version_mismatch: |- The guest additions on this VM do not match the installed version of VirtualBox! In most cases this is fine, but in rare cases it can cause things such as shared folders to not work properly. If you see shared folder errors, please update the guest additions within the virtual machine and reload your VM. Guest Additions Version: %{guest_version} VirtualBox Version: %{virtualbox_version} clear_forward_ports: deleting: Clearing any previously set forwarded ports... clear_network_interfaces: deleting: Clearing any previously set network interfaces... clear_shared_folders: deleting: Cleaning previously set shared folders... customize: failure: |- A customization command failed: %{command} The following error was experienced: %{error} Please fix this customization and try again. running: Running '%{event}' VM customizations... destroy: destroying: Destroying VM and associated drives... destroy_network: destroying: Destroying unused networking interface... disable_networks: disabling: Disabling host only networks... discard_state: discarding: Discarding saved state of VM... export: create_dir: Creating temporary directory for export... exporting: Exporting VM... power_off: "The Vagrant virtual environment you are trying to package must be powered off." forward_ports: auto_empty: |- Vagrant found a port collision for the specified port and virtual machine. While this port was marked to be auto-corrected, the ports in the auto-correction range are all also used. VM: %{vm_name} Forwarded port: %{guest_port} => %{host_port} collision_error: |- Vagrant cannot forward the specified ports on this VM, since they would collide with some other application that is already listening on these ports. The forwarded port to %{host_port} is already in use on the host machine. To fix this, modify your current projects Vagrantfile to use another port. Example, where '1234' would be replaced by a unique host port: config.vm.network :forwarded_port, guest: %{guest_port}, host: 1234 Sometimes, Vagrant will attempt to auto-correct this for you. In this case, Vagrant was unable to. This is usually because the guest machine is in a state which doesn't allow modifying port forwarding. fixed_collision: |- Fixed port collision for %{guest_port} => %{host_port}. Now on port %{new_port}. forwarding: Forwarding ports... forwarding_entry: |- -- %{guest_port} => %{host_port} (adapter %{adapter}) non_nat: |- VirtualBox adapter #%{adapter} not configured as "NAT". Skipping port forwards on this adapter. privileged_ports: |- You are trying to forward to privileged ports (ports <= 1024). Most operating systems restrict this to only privileged process (typically processes running as an administrative user). This is a warning in case the port forwarding doesn't work. If any problems occur, please try a port higher than 1024. halt: force: |- Forcing shutdown of VM... graceful: |- Attempting graceful shutdown of VM... hostname: setting: "Setting hostname..." import: importing: Importing base box '%{name}'... failure: |- The VM import failed! Try running `VBoxManage import` on the box file manually for more verbose error output. match_mac: matching: Matching MAC address for NAT networking... no_base_mac: |- No base MAC address was specified. This is required for the NAT networking to work properly (and hence port forwarding, SSH, etc.). Specifying this MAC address is typically up to the box and box maintiner. Please contact the relevant person to solve this issue. network: adapter_collision: |- More than one network have been assigned to the same adapter. Please make sure your networks you've configured in your Vagrantfile do not overlap. configuring: |- Configuring and enabling network interfaces... dhcp_already_attached: |- A host only network interface you're attempting to configure via DHCP already has a conflicting host only adapter with DHCP enabled. The DHCP on this adapter is incompatible with the DHCP settings. Two host only network interfaces are not allowed to overlap, and each host only network interface can have only one DHCP server. Please reconfigure your host only network or remove the virtual machine using the other host only network. no_adapters: |- No available adapters on the virtual machine were found to accomodate for all configured networks. VirtualBox virtual machines have 8 network interfaces available usually, so please lower the number of networks to below 8. preparing: |- Preparing network interfaces based on configuration... host_only_network: collides: |- The specified host network collides with a non-hostonly network! This will cause your specified IP to be inaccessible. Please change the IP or name of your host only network to not match that of a bridged or non-hostonly network. creating: "Creating new host only network for environment..." enabling: "Enabling host only network..." not_found: |- The specified host network could not be found: '%{name}.' If the name specification is removed, Vagrant will create a new host only network for you. Alternatively, please create the specified network manually. preparing: "Preparing host only network..." nfs: exporting: Exporting NFS shared folders... mounting: Mounting NFS shared folders... persist: dotfile_error: |- The dotfile which Vagrant uses to store the UUID of the project's virtual machine already exists and is not a file! The dotfile is currently configured to be '%{dotfile_path}' To change this value, please see `config.vagrant.dotfile_name` Are you trying to use Vagrant from your home directory? This is the leading cause of this error message. To resolve this, simply use a different directory. Or, if you really want to run Vagrant from your home directory, modify the `config.vagrant.dotfile_name` configuration key. persisting: "Persisting the VM UUID (%{uuid})..." provision: beginning: "Running provisioner: %{provisioner}..." resume: resuming: Resuming suspended VM... unpausing: |- Unpausing the VM... share_folders: creating: Creating shared folders metadata... mounting: Mounting shared folders... mounting_entry: "-- %{guest_path}" nomount_entry: "-- Automounting disabled: %{host_path}" set_name: setting_name: |- Setting the name of the VM... suspend: suspending: Saving VM state and suspending execution... box: unpackage: untar_failure: |- The box failed to unpackage properly. Please verify that the box file you're trying to add is not corrupted and try again. The output from attempting to unpackage (if any): %{output} already_exists: |- The box you're attempting to add already exists: Name: %{name} Provider: %{formats} add: adding: |- Extracting box... added: |- Successfully added box '%{name}' with provider '%{provider}'! destroy: destroying: "Deleting box '%{name}'..." download: cleaning: "Cleaning up downloaded box..." downloading: "Downloading box from URL: %{url}" download_failed: |- Download failed. Will try another box URL if there is one. interrupted: "Box download was interrupted. Exiting." resuming: "Box download is resuming from prior download progress" verify: verifying: "Verifying box..." failed: |- The box file you're attempting to add is invalid. This can be commonly attributed to typos in the path given to the box add command. Another common case of this is invalid packaging of the box itself. general: package: packaging: "Packaging additional file: %{file}" compressing: "Compressing package to: %{tar_path}" output_exists: |- The specified file to save the package as already exists. Please remove this file or specify a different file name for outputting. output_is_directory: |- The specified output is a directory. Please specify a path including a filename. requires_directory: |- A directory was not specified to package. This should never happen and is a result of an internal inconsistency. include_file_missing: |- Package include file doesn't exist: %{file} downloaders: file: download: "Copying box to temporary location..." file_missing: "The specified path to a file doesn't exist." http: connection_reset: |- The remote server unexpectedly closed the connection. Vagrant was unable to finish downloading the box. Please try again. If this problem persists, please try downloading the box manually outside of Vagrant, then adding the box from the filesystem. connection_timeout: |- Vagrant timed out while attempting to connect to the HTTP host. Please check your internet and proxy settings and try again. download: "Downloading box: %{url}" socket_error: |- An error occurred while trying to download the specified box. This most often happens if there is no internet connection or the address is invalid. status_error: |- Bad status code: %{status} Please verify that the box exists and is accessible. Also verify that this computer is properly connected to the internet. hosts: bsd: nfs_export: |- Preparing to edit /etc/exports. Administrator privileges will be required... nfs_prune: |- Pruning invalid NFS exports. Administrator privileges will be required... linux: nfs_export: |- Preparing to edit /etc/exports. Administrator privileges will be required... nfs_prune: |- Pruning invalid NFS exports. Administrator privileges will be required... arch: nfs_export: prepare: "Preparing to edit /etc/exports. Administrator privileges will be required..." freebsd: nfs_whitespace: |- FreeBSD hosts do not support sharing directories with whitespace in their path. Please adjust your path accordingly. provisioners: chef: chef_not_detected: |- The chef binary (either `chef-solo` or `chef-client`) was not found on the VM and is required for chef provisioning. Please verify that chef is installed and that the binary is available on the PATH. cookbook_folder_not_found_warning: "The cookbook path '%{path}' doesn't exist. Ignoring..." json: "Generating chef JSON and uploading..." client_key_folder: "Creating folder to hold client key..." upload_validation_key: "Uploading chef client validation key..." upload_encrypted_data_bag_secret_key: "Uploading chef encrypted data bag secret key..." running_client: "Running chef-client..." running_client_again: "Running chef-client again (failed to converge)..." running_solo: "Running chef-solo..." running_solo_again: "Running chef-solo again (failed to converge)..." missing_shared_folders: |- Shared folders that Chef requires are missing on the virtual machine. This is usually due to configuration changing after already booting the machine. The fix is to run a `vagrant reload` so that the proper shared folders will be prepared and mounted on the VM. no_convergence: |- Chef never successfully completed! Any errors should be visible in the output above. Please fix your recipes so that they properly complete. not_detected: |- The `%{binary}` binary appears to not be in the PATH of the guest. This could be because the PATH is not properly setup or perhaps chef is not installed on this guest. Chef provisioning can not continue without chef properly installed. server_url_required: |- Chef server provisioning requires that the `config.chef.chef_server_url` be set to the URL of your chef server. Examples include "http://12.12.12.12:4000" and "http://myserver.com:4000" (the port of course can be different, but 4000 is the default) server_validation_key_required: |- Chef server provisioning requires that the `config.chef.validation_key_path` configuration be set to a path on your local machine of the validation key used to register the VM with the chef server. server_validation_key_doesnt_exist: |- The validation key set for `config.chef.validation_key_path` does not exist! This file needs to exist so it can be uploaded to the virtual machine. deleting_from_server: "Deleting %{deletable} \"%{name}\" from Chef server..." file: no_dest_file: "File destination must be specified." no_source_file: "File source must be specified." path_invalid: "File upload source file %{path} must exist" puppet: not_detected: |- The `%{binary}` binary appears to not be in the PATH of the guest. This could be because the PATH is not properly setup or perhaps Puppet is not installed on this guest. Puppet provisioning can not continue without Puppet properly installed. running_puppet: "Running Puppet with %{manifest}..." manifest_missing: |- The configured Puppet manifest is missing. Please specify a path to an existing manifest: %{manifest} manifests_path_missing: "The manifests path specified for Puppet does not exist: %{path}" missing_shared_folders: |- Shared folders that Puppet requires are missing on the virtual machine. This is usually due to configuration changing after already booting the machine. The fix is to run a `vagrant reload` so that the proper shared folders will be prepared and mounted on the VM. module_path_missing: "The configured module path doesn't exist: %{path}" puppet_server: cert_requires_node: |- "puppet_node" is required when a client cert or key is specified client_cert_and_private_key: |- Both a client certificate and private key must be specified, if any client_cert_not_found: |- The specified client cert path could not be found client_private_key_not_found: |- The specified client private key path could not be found not_detected: |- The `%{binary}` binary appears to not be in the PATH of the guest. This could be because the PATH is not properly setup or perhaps Puppet is not installed on this guest. Puppet provisioning can not continue without Puppet properly installed. running_puppetd: "Running Puppet agent..." uploading_client_cert: |- Uploading client certificate and private key... shell: args_bad_type: "Shell provisioner `args` must be a string or array." no_path_or_inline: "One of `path` or `inline` must be set." path_and_inline_set: "Only one of `path` or `inline` may be set." path_invalid: "`path` for shell provisioner does not exist on the host system: %{path}" running: "Running: %{script}" upload_path_not_set: "`upload_path` must be set for the shell provisioner." ansible: no_playbook: "`playbook` must be set for the Ansible provisioner." playbook_path_invalid: "`playbook` for the Ansible provisioner does not exist on the host system: %{path}" inventory_path_invalid: "`inventory_path` for the Ansible provisioner does not exist on the host system: %{path}" extra_vars_invalid: "`extra_vars` for the Ansible provisioner must be a hash or a path to an existing file. Received: %{value} (as %{type})"