en: docker_provider: already_built: |- Image is already built from the Dockerfile. `vagrant reload` to rebuild. build_image_destroy: |- Removing built image... build_image_destroy_in_use: |- Build image couldn't be destroyed because the image is in use. The image must be destroyed manually in the future if you want to remove it. build_image_invalid: |- Build image no longer exists. Rebuilding... building: |- Building the container from a Dockerfile... building_git_repo: |- Building the container from the git repository: %{repo}... building_named_dockerfile: |- Building the container from the named Dockerfile: %{file}... building_git_repo_named_dockerfile: |- Building the container from the named Dockerfile: %{file} in the git repository: %{repo}... creating: |- Creating the container... created: |- Container created: %{id} host_machine_disabling_folders: |- Removing synced folders... host_machine_forwarded_ports: |- Warning: When using a remote Docker host, forwarded ports will NOT be immediately available on your machine. They will still be forwarded on the remote machine, however, so if you have a way to access the remote machine, then you should be able to access those ports there. This is not an error, it is only an informational message. host_machine_needed: |- Docker host is required. One will be created if necessary... host_machine_ready: |- Docker host VM is already ready. host_machine_starting: |- Vagrant will now create or start a local VM to act as the Docker host. You'll see the output of the `vagrant up` for this VM below. host_machine_syncing_folders: |- Syncing folders to the host VM... logging_in: |- Logging in to Docker server... logs_host_state_unknown: |- This container requires a host VM, and the state of that VM is unknown. Run `vagrant up` to verify that the container and its host VM is running, then try again. network_bridge_gateway_invalid: |- The provided gateway IP address is invalid (%{gateway}). Please provide a valid IP address. network_bridge_gateway_outofbounds: |- The provided gateway IP (%{gateway}) is not within the defined subnet (%{subnet}). Please provide an IP address within the defined subnet. network_bridge_gateway_request: |- Gateway IP address for %{interface} interface [%{default_gateway}]: network_bridge_iprange_info: |- When an explicit address is not provided to a container attached to this bridged network, docker will supply an address to the container. This is independent of the local DHCP service that may be available on the network. network_bridge_iprange_invalid: |- The provided IP address range is invalid (%{range}). Please provide a valid range. network_bridge_iprange_outofbounds: |- The provided IP address range (%{range}) is not within the defined subnet (%{subnet}). Please provide an address range within the defined subnet. network_bridge_iprange_request: |- Available address range for assignment on %{interface} interface [%{default_range}]: network_create: |- Creating and configuring docker networks... network_connect: |- Enabling network interfaces... network_destroy: |- Removing network %{network_name} ... not_created_skip: |- Container not created. Skipping. not_docker_provider: |- Not backed by Docker provider. Skipping. pull: |- Pulling image '%{image}'... run_command_required: |- `vagrant docker-run` requires a command to execute. This command must be specified after a `--` in the command line. This is used to separate possible machine names and options from the actual command to execute. An example is shown below: vagrant docker-run web -- rails new . running: |- Container is starting. Output will stream in below... running_detached: |- Container is started detached. ssh_through_host_vm: |- SSH will be proxied through the Docker virtual machine since we're not running Docker natively. This is just a notice, and not an error. subnet_exists: |- A network called '%{network_name}' using subnet '%{subnet}' is already in use. Using '%{network_name}' instead of creating a new network... synced_folders_changed: |- Vagrant has noticed that the synced folder definitions have changed. With Docker, these synced folder changes won't take effect until you destroy the container and recreate it. waiting_for_running: |- Waiting for container to enter "running" state... volume_path_not_expanded: |- Host path `%{host}` exists as a `volumes` key and is a folder on disk. Vagrant will not expand this key like it used to and instead leave it as is defined. If this folder is intended to be used, make sure its full path is defined in your `volumes` config. More information can be found on volumes in the docker compose documentation. messages: destroying: |- Deleting the container... not_created: |- The container hasn't been created yet. not_created_original: |- The original container hasn't been created yet. Run `vagrant up` for this machine first. not_running: |- The container is not currently running. preparing: |- Preparing to start the container... provision_no_ssh: |- Provisioners will not be run since container doesn't support SSH. will_not_destroy: |- The container will not be destroyed, since the confirmation was declined. starting: |- Starting container... stopping: |- Stopping container... container_ready: |- Container started and ready for use! status: host_state_unknown: |- The host VM for the Docker containers appears to not be running or is currently inaccessible. Because of this, we can't determine the state of the containers on that host. Run `vagrant up` to bring up the host VM again. not_created: |- The environment has not yet been created. Run `vagrant up` to create the environment. If a machine is not created, only the default provider will be shown. So if a provider is not listed, then the machine is not created for that environment. preparing: |- Vagrant is preparing to start this Docker container. Run `vagrant up` to continue. running: |- The container is created and running. You can stop it using `vagrant halt`, see logs with `vagrant docker-logs`, and kill/destroy it with `vagrant destroy`. stopped: |- The container is created but not running. You can run it again with `vagrant up`. If the container always goes to "stopped" right away after being started, it is because the command being run exits and doesn't keep running. errors: compose_lock_timeout: |- Vagrant encountered a timeout waiting for the docker compose driver to become available. Please try to run your command again. If you continue to experience this error it may be resolved by disabling parallel execution. docker_compose_not_installed: |- Vagrant has been instructed to use to use the Compose driver for the Docker plugin but was unable to locate the `docker-compose` executable. Ensure that `docker-compose` is installed and available on the PATH. not_created: |- The container hasn't been created yet. not_running: |- The container is not currently running. communicator_non_docker: |- The "docker_hostvm" communicator was specified on a machine that is not provided by the Docker provider. This is a bug with your Vagrantfile. Please contact the creator of your Vagrant environment and notify them to not use this communicator for anything except the "docker" provider. config: both_build_and_image_and_git: |- Only one of "build_dir", "git_repo" or "image" can be set build_dir_invalid: |- "build_dir" must exist and contain a Dockerfile git_repo_invalid: |- "git_repo" must be a valid repository URL build_dir_or_image: |- One of "build_dir", "git_repo" or "image" must be set compose_configuration_hash: |- "compose_configuration" must be a hash compose_force_vm: |- Docker compose is not currently supported from within proxy VM. git_repo_invalid: |- "git_repo" must be a valid git URL create_args_array: |- "create_args" must be an array invalid_link: |- Invalid link (should be 'name:alias'): "%{link}" invalid_vagrantfile: |- "vagrant_vagrantfile" must point to a Vagrantfile that exists. docker_provider_nfs_without_privileged: |- You've configured a NFS synced folder but didn't enable privileged mode for the container. Please set the `privileged` option to true on the provider block from your Vagrantfile, recreate the container and try again. docker_provider_image_not_configured: |- The base Docker image has not been set for the '%{name}' VM! execute_error: |- A Docker command executed by Vagrant didn't complete successfully! The command run along with the output from the command is shown below. Command: %{command} Stderr: %{stderr} Stdout: %{stdout} exec_command_required: |- The "docker-exec" command requires a command to execute. This command must be specified after a "--" in the command line. This is used to separate machine name and options from the actual command to execute. An example is show below: $ vagrant docker-exec -t nginx -- bash host_vm_communicator_not_ready: |- The Docker provider was able to bring up the host VM successfully but the host VM is still reporting that SSH is unavailable. This sometimes happens with certain providers due to bugs in the underlying hypervisor, and can be fixed with a `vagrant reload`. The ID for the host VM is shown below for convenience. If this does not fix it, please verify that the host VM provider is functional and properly configured. Host VM ID: %{id} network_address_invalid: |- The configured network address is not valid within the configured subnet of the defined network. Please update the network settings and try again. Configured address: %{address} Network name: %{network_name} network_address_required: |- An IP address is required if not using `type: "dhcp"` or not specifying a `subnet`. network_invalid_option: |- Invalid option given for docker network for guest "%{container}". Must specify either a `subnet` or use `type: "dhcp"`. network_name_missing: |- The Docker provider is unable to connect the container to the defined network due to a missing network name. Please validate your configuration and try again. Container: %{container} Network Number: %{index} network_name_undefined: |- The Docker provider was unable to configure networking using the provided network name `%{network_name}`. Please ensure the network name is correct and exists, then try again. network_no_interfaces: |- The Docker provider was unable to list any available interfaces to bridge the public network with. network_subnet_invalid: |- The configured network subnet is not valid for the defined network. Please update the network settings and try again. Configured subnet: %{subnet} Network name: %{network_name} package_not_supported: |- The "package" command is not supported with the Docker provider. If you'd like to commit or push your Docker container, please SSH into the host VM (if there is one), and run `docker commit` and so on manually. state_not_running: |- The container never entered the "running" state, or entered it briefly but reverted back to another state. Please verify that the configuration of the container is correct. If you meant for this container to not remain running, please set the Docker provider configuration "remains_running" to "false": config.vm.provider "docker" do |d| d.remains_running = false end state_stopped: |- The container started either never left the "stopped" state or very quickly reverted to the "stopped" state. This is usually because the container didn't execute a command that kept it running, and usually indicates a misconfiguration. If you meant for this container to not remain running, please set the Docker provider configuration "remains_running" to "false": config.vm.provider "docker" do |d| d.remains_running = false end suspend_not_supported: |- The "suspend" command is not supported with the Docker provider. Docker containers don't natively support suspend. If you're using a host machine, you can suspend the host machine by finding it in `vagrant global-status` and using `vagrant suspend `. synced_folder_non_docker: |- The "docker" synced folder type can't be used because the provider in use is not Docker. This synced folder type only works with the Docker provider. The provider this machine is using is: %{provider} vagrantfile_not_found: |- The configured host VM Vagrantfile could not be found. Please fix the Vagrantfile for this Docker environment to point to a valid host VM.