en: vagrant: general: creating_home_dir: "Creating home directory since it doesn't exist: %{directory}" moving_home_dir: "Moving old Vagrant home directory to new location: %{directory}" home_dir_migration_failed: |- Both an old and new Vagrant home directory exist. Only the new one will be used. Please merge the old directory into the new directory if you'd like to use the old data as well. Old: %{old} New: %{new} #------------------------------------------------------------------------------- # Translations for exception classes #------------------------------------------------------------------------------- errors: base_vm_not_found: The base VM with the name '%{name}' was not found. box_not_found: Box '%{name}' could not be found. chef_not_detected: |- The chef (either `chef-solo` or `chef-client`) binary was not found on the VM and is required for chef provisioning. Please verify that chef is installed and that the binary is available on the PATH. puppet_not_detected: |- The `puppet` binary was not found on the VM and is required for Puppet provisioning. Please verify that Puppet is installed and that the binary is available on the PATH. puppetd_not_detected: |- The `puppetd` binary was not found on the VM is required for Puppet Server provisioning. Please verify that Puppet is installed and that the binary is available on the PATH. cli_missing_env: This command requires that a Vagrant environment be properly passed in as the last parameter. config_validation: |- There was a problem with the configuration of Vagrant. The error message(s) are printed below: %{messages} dotfile_is_directory: |- The local file Vagrant uses to store data ".vagrant" already exists and is a directory! If you are in your home directory, then please run this command in another directory. If you aren't in a home directory, then please rename ".vagrant" to something else, or configure Vagrant to use another filename by modifying `config.vagrant.dotfile_name`. environment_locked: |- An instance of Vagrant is already running. Only one instance of Vagrant may run at any given time to avoid problems with VirtualBox inconsistencies occurring. Please wait for the other instance of Vagrant to end and then try again. interrupted: "Vagrant exited after cleanup due to external interrupt." multi_vm_required: "A multi-vm environment is required for name specification to this command." multi_vm_target_required: "`vagrant %{command}` requires a specific VM name to target in a multi-VM environment." no_env: "No Vagrant environment detected. Run `vagrant init` to set one up." ssh_authentication_failed: |- SSH authentication failed! This is typically caused by the public/private keypair for the SSH user not being properly set on the guest VM. Please verify that the guest VM is setup with the proper public key, and that the private key path for Vagrant is setup properly as well. ssh_bad_exit_status: |- The following SSH command responded with a non-zero exit status. Vagrant assumes that this means the command failed! %{command} The output of the command prior to failing is outputted below: %{output} ssh_connection_refused: |- SSH connection was refused! This usually happens if the VM failed to boot properly. Some steps to try to fix this: First, try reloading your VM with `vagrant reload`, since a simple restart sometimes fixes things. If that doesn't work, destroy your VM and recreate it with a `vagrant destroy` followed by a `vagrant up`. If that doesn't work, contact a Vagrant maintainer (support channels listed on the website) for more assistance. ssh_key_bad_permissions: |- The private key to connect to this box via SSH has invalid permissions set on it. The permissions of the private key should be set to 0600, otherwise SSH will ignore the key. Vagrant tried to do this automatically for you but failed. Please set the permissions on the following file to 0600 and then try running this command again: %{key_path} ssh_port_not_detected: |- Vagrant couldn't determine the SSH port for your VM! This is a rare, exceptional event, and a bug should be filed. Please try recreating your VM (vagrant destroy, then vagrant up). Sorry! ssh_unavailable: "`ssh` binary could not be found. Is an SSH client installed?" ssh_unavailable_windows: |- `vagrant ssh` isn't available on the Windows platform. The vagrant.ppk file for use with Putty is available at: %{key_path}.ppk To use this create a new Putty session for `vagrant@localhost` on port `%{ssh_port}`, in the Connection>SSH>Auth configuration section navigate to the vagrant.ppk file, select it, save the session for later use, and connect. For a more detailed guide please consult: http://vagrantup.com/docs/getting-started/setup/windows.html system: invalid_class: |- The specified system does not inherit from `Vagrant::Systems::Base`. The specified system class must inherit from this class. The specified system class was: %{system} unknown_type: |- The specified system type is unknown: %{system}. Please change this to a proper value. unspecified: |- A VM system type must be specified! This is done via the `config.vm.system` configuration value. Please read the documentation online for more information. vagrantfile_syntax_error: |- There is a syntax error in the following Vagrantfile. The syntax error message is reproduced below for convenience: %{file} virtualbox_invalid_version: |- Vagrant has detected that you have VirtualBox version %{version} installed! Vagrant requires that you use at least VirtualBox version 4.1. Please install a more recent version of VirtualBox to continue. Early versions of Vagrant support earlier versions of VirtualBox. Specifically, the 0.7.x series supports VirtualBox 4.0.x and the 0.6.x series supports VirtualBox 3.2.x. Please use the version you need. Any newer versions may not be supported yet. Please check the mailing list for any announcements of newer versions. virtualbox_not_detected: |- Vagrant could not detect VirtualBox! Make sure VirtualBox is properly installed. If VirtualBox is installed, it may be an incorrect version. Vagrant currently requires VirtualBox 4.0.x. Please install the proper version to continue. If you have an older or newer version of VirtualBox, please make sure you're using the proper version of Vagrant. Ask the mailing list if you have questions. virtualbox_not_detected_win64: |- Vagrant could not detect VirtualBox! Make sure VirtualBox is properly installed with version 4.0.0 or higher. Additionally, it appears you're on 64-bit Windows. If this is the case, and VirtualBox is properly installed with the correct version, then please make sure you're running Vagrant via JRuby on a 64-bit Java runtime. For more information on how to set this up and how to verify it is properly setup, please view the guide online at: http://vagrantup.com/docs/getting-started/setup/windows_x64.html vm_creation_required: "VM must be created before running this command. Run `vagrant up` first." vm_not_found: "A VM by the name of %{name} was not found." vm_not_running: "VM must be running to open SSH connection." #------------------------------------------------------------------------------- # Translations for config validation errors #------------------------------------------------------------------------------- config: common: error_empty: "`%{field}` must be filled in." chef: run_list_empty: "Run list must not be empty." cookbooks_path_empty: "Must specify a cookbooks path for chef solo." server_url_empty: "Chef server URL must be populated." validation_key_path: "Validation key path must be valid path to your chef server validation key." ssh: private_key_missing: "`private_key_path` file must exist: %{path}" vm: base_mac_invalid: "Base MAC address for eth0/NAT must be set. Contact box maintainer for more information." boot_mode_invalid: "Boot mode must be one of: vrdp or gui" box_missing: "A box must be specified." box_not_found: "The box '%{name}' could not be found." network_ip_invalid: "The host only network IP '%{ip}' is invalid." network_ip_ends_one: |- The host only network IP '%{ip}' must not end in a 1, as this is reserved for the host machine. shared_folder_hostpath_missing: "Shared folder host path for '%{name}' doesn't exist: %{path}" shared_folder_nfs_owner_group: |- Shared folder '%{name}': NFS does not support the owner/group settings. provisioner_chef_server_changed: "The provisioner 'chef_server' is now 'chef_client'" provisioner_not_found: "The provisioner '%{shortcut}' doesn't exist." provisioner_invalid_class: "The provisioner '%{shortcut}' must inherit from `Vagrant::Provisioners::Base`." #------------------------------------------------------------------------------- # Translations for commands. e.g. `vagrant x` #------------------------------------------------------------------------------- commands: common: vm_not_created: "VM not created. Moving on..." vm_not_running: "VM is not currently running. Please bring it up to run this command." box: no_installed_boxes: "There are no installed boxes! Use `vagrant box add` to add some." ssh: command: "Command: %{command}" status: aborted: |- The VM is in an aborted state. This means that it was abruptly stopped without properly closing the session. Run `vagrant up` to resume this virtual machine. If any problems persist, you may have to destroy and restart the virtual machine. output: |- Current VM states: %{states} %{message} not_created: |- The environment has not yet been created. Run `vagrant up` to create the environment. powered_off: The VM is powered off. To restart the VM, simply run `vagrant up` running: |- The VM is running. To stop this VM, you can run `vagrant halt` to shut it down forcefully, or you can run `vagrant suspend` to simply suspend the virtual machine. In either case, to restart it again, simply run `vagrant up`. saved: To resume this VM, simply run `vagrant up`. stuck: |- The VM is "stuck!" This is a very rare state which means that VirtualBox is unable to recover the current state of the VM. The only known solution to this problem is to restart your machine, sorry. listing: |- This environment represents multiple VMs. The VMs are all listed above with their current state. For more information about a specific VM, run `vagrant status NAME`. up: vm_created: "VM already created. Booting if its not already running..." upgrade_to_060: already_done: "Environment appears to already be upgraded to 0.6.0. Doing nothing!" ask: "Are you sure you want to execute this command?" backing_up: "Backing up previous .vagrant file..." complete: "Environment upgraded to 0.6.0 successfully." info: |- This command will upgrade the current environment from a pre-0.6.0 environment to a 0.6.x compatible environment. Running this command multiple times should be okay. This command will make a backup file prior to making any changes. Therefore, if anything goes wrong, then restore that file to ".vagrant" in the same directory as the Vagrantfile. quit: "Not executing this command by user request. Quitting..." version: output: "Vagrant version %{version}" #------------------------------------------------------------------------------- # Translations for Vagrant middleware acions #------------------------------------------------------------------------------- actions: runner: waiting_cleanup: "Waiting for cleanup before exiting..." exit_immediately: "Exiting immediately, without cleanup!" vm: boot: booting: Booting VM... waiting: Waiting for VM to boot. This can take a few minutes. ready: VM booted and ready for use! failed: Failed to connect to VM! failed_to_boot: |- Failed to connect to VM via SSH. Please verify the VM successfully booted by looking at the VirtualBox GUI. check_box: not_found: Box %{name} was not found. Fetching box from specified URL... not_specified: |- No base box was specified! A base box is required as a staring point for every vagrant virtual machine. Please specify one in your Vagrantfile using `config.vm.box` does_not_exist: |- Specified box `%{name}` does not exist! The box must be added through the `vagrant box add` command. Please view the documentation associated with the command for more information. check_guest_additions: not_detected: |- No guest additions were detected on the base box for this VM! Guest additions are required for forwarded ports, shared folders, host only networking, and more. If SSH fails on this machine, please install the guest additions and repackage the box to continue. This is not an error message; everything may continue to work properly, in which case you may ignore this message. version_mismatch: |- The guest additions on this VM do not match the install version of VirtualBox! This may cause things such as forwarded ports, shared folders, and more to not work properly. If any of those things fail on this machine, please update the guest additions and repackage the box. Guest Additions Version: %{guest_version} VirtualBox Version: %{virtualbox_version} clear_forward_ports: deleting: Clearing any previously set forwarded ports... clear_shared_folders: deleting: Cleaning previously set shared folders... customize: running: Running any VM customizations... destroy: destroying: Destroying VM and associated drives... destroy_network: destroying: Destroying unused networking interface... disable_networks: disabling: Disabling host only networks... discard_state: discarding: Discarding saved state of VM... export: create_dir: Creating temporary directory for export... exporting: Exporting VM... power_off: "The Vagrant virtual environment you are trying to package must be powered off." forward_ports: auto_empty: |- Vagrant found a port collision for the specified port and virtual machine. While this port was marked to be auto-corrected, the ports in the auto-correction range are all also used. VM: %{vm_name} Forwarded port: %{name} (%{guest_port} => %{host_port}) below_threshold_error: |- The host port of all forwarded ports must be above 1024. VirtualBox does not allow host ports to be below 1024. (Guest ports below 1024 are fine. For example: SSH on port 22 on the guest can be forwarded to port 2222, but not 222). collision_error: |- Vagrant cannot forward the specified ports on this VM, since they would collide with another VirtualBox virtual machine's forwarded ports! The '%{name}' forwarded port (%{host_port}) is already in use on the host machine. To fix this, modify your current projects Vagrantfile to use another port. Example, where '1234' would be replaced by a unique host port: config.vm.forward_port("%{name}", %{guest_port}, 1234) fixed_collision: Fixed port collision '%{name}'. Now on port %{new_port}. forwarding: Forwarding ports... forwarding_entry: "-- %{name}: %{guest_port} => %{host_port} (adapter %{adapter})" non_nat: |- VirtualBox adapter #%{adapter} not configured as "NAT" Skipping port forwarding '%{name}'. halt: force: Forcing shutdown of VM... host_name: setting: "Setting host name..." import: importing: Importing base box '%{name}'... failure: |- The VM import failed! Try running `VBoxManage import` on the box file manually for more verbose error output. match_mac: matching: Matching MAC address for NAT networking... no_base_mac: |- No base MAC address was specified. This is required for the NAT networking to work properly (and hence port forwarding, SSH, etc.). Specifying this MAC address is typically up to the box and box maintiner. Please contact the relevant person to solve this issue. network: collides: |- The specified host network collides with a non-hostonly network! This will cause your specified IP to be inaccessible. Please change the IP or name of your host only network to not match that of a bridged or non-hostonly network. creating: "Creating new host only network for environment..." enabling: "Enabling host only network..." not_found: |- The specified host network could not be found: '%{name}.' If the name specification is removed, Vagrant will create a new host only network for you. Alternatively, please create the specified network manually. preparing: "Preparing host only network..." windows_not_implemented: |- Host only networking is currently broken on Windows due to a bug in jruby-win32ole. When the bug is fixed, a patch release for Vagrant will be released to remove this error. Until then, please just use forwarded ports. nfs: host_required: |- A host class is required for NFS shared folders. By default, these are auto-detected, but can be overridden with `config.vagrant.host`. There is currently not host class loaded. no_host_network: |- NFS shared folders requires that host only networking is enabled. Please enable host only networking via `config.vm.network`. not_supported: |- The host class is reporting that NFS is not supported by this host, or `nfsd` may not be installed. Please verify that `nfsd` is installed on your machine, and retry. exporting: Exporting NFS shared folders... mounting: Mounting NFS shared folders... persist: dotfile_error: |- The dotfile which Vagrant uses to store the UUID of the project's virtual machine already exists and is not a file! The dotfile is currently configured to be '%{dotfile_path}' To change this value, please see `config.vagrant.dotfile_name` Are you trying to use Vagrant from your home directory? This is the leading cause of this error message. To resolve this, simply use a different directory. Or, if you really want to run Vagrant from your home directory, modify the `config.vagrant.dotfile_name` configuration key. persisting: "Persisting the VM UUID (%{uuid})..." provision: beginning: "Running provisioner: %{provisioner}..." resume: resuming: Resuming suspended VM... share_folders: creating: Creating shared folders metadata... mounting: Mounting shared folders... mounting_entry: "-- %{name}: %{guest_path}" nomount_entry: "-- %{name}: Automounting disabled." suspend: suspending: Saving VM state and suspending execution... box: destroy: destroying: "Deleting box '%{name}'..." download: with: "Downloading with %{class}..." cleaning: "Cleaning up downloaded box..." unknown_type: "Unknown or unsupported URI type given for box download." unpackage: extracting: "Extracting box..." already_exists: |- A box already exists under the name of '%{name}'. This may or may not be the same box you are trying to add. Please use another name or remove the previous box then try to add it again. verify: verifying: "Verifying box..." failed: |- The box file you're attempting to add is invalid. This can be commonly attributed to typos in the path given to the box add command. Another common case of this is invalid packaging of the box itself. general: package: packaging: "Packaging additional file: %{file}" compressing: "Compressing package to: %{tar_path}" output_exists: |- The specified file to save the package as already exists. Please remove this file or specify a different file name for outputting. requires_directory: |- A directory was not specified to package. This should never happen and is a result of an internal inconsistency. include_file_missing: |- Package include file doesn't exist: %{file} downloaders: file: download: "Copying box to temporary location..." file_missing: "The specified path to a file doesn't exist." http: download: "Downloading box: %{url}" socket_error: |- An error occurred while trying to download the specified box. This most often happens if there is no internet connection or the address is invalid. status_error: |- Bad status code: %{status} Please verify that the box exists and is accessible. Also verify that this computer is properly connected to the internet. hosts: bsd: nfs_export: prepare: "Preparing to edit /etc/exports. Administrator privileges will be required..." linux: nfs_export: prepare: "Preparing to edit /etc/exports. Administrator privileges will be required..." arch: nfs_export: prepare: "Preparing to edit /etc/exports. Administrator privileges will be required..." provisioners: chef: json: "Generating chef JSON and uploading..." client_key_folder: "Creating folder to hold client key..." upload_validation_key: "Uploading chef client validation key..." upload_encrypted_data_bag_secret_key: "Uploading chef encrypted data bag secret key..." running_client: "Running chef-client..." running_solo: "Running chef-solo..." invalid_provisioner: "Vagrant::Provisioners::Chef is not a valid provisioner! Use ChefSolo or ChefClient instead." not_detected: |- The `%{binary}` binary appears to not be in the PATH of the guest. This could be because the PATH is not properly setup or perhaps chef is not installed on this guest. Chef provisioning can not continue without chef properly installed. server_url_required: |- Chef server provisioning requires that the `config.chef.chef_server_url` be set to the URL of your chef server. Examples include "http://12.12.12.12:4000" and "http://myserver.com:4000" (the port of course can be different, but 4000 is the default) server_validation_key_required: |- Chef server provisioning requires that the `config.chef.validation_key_path` configuration be set to a path on your local machine of the validation key used to register the VM with the chef server. server_validation_key_doesnt_exist: |- The validation key set for `config.chef.validation_key_path` does not exist! This file needs to exist so it can be uploaded to the virtual machine. puppet: not_detected: |- The `%{binary}` binary appears to not be in the PATH of the guest. This could be because the PATH is not properly setup or perhaps Puppet is not installed on this guest. Puppet provisioning can not continue without Puppet properly installed. running_puppet: "Running Puppet with %{manifest}..." manifest_missing: "The Puppet %{manifest} manifest is missing. You cannot configure this box." manifests_path_missing: "The manifests path specified for Puppet does not exist: %{path}" module_path_missing: "The configured module path doesn't exist: %{path}" puppet_server: not_detected: |- The `%{binary}` binary appears to not be in the PATH of the guest. This could be because the PATH is not properly setup or perhaps Puppet is not installed on this guest. Puppet provisioning can not continue without Puppet properly installed. running_puppetd: "Running Puppet agent..." shell: path_and_inline_set: "Only one of `path` or `inline` may be set." no_path_or_inline: "One of `path` or `inline` must be set." path_invalid: "`path` for shell provisioner does not exist on the host system: %{path}" upload_path_not_set: "`upload_path` must be set for the shell provisioner." systems: base: unsupported_host_only: |- Host only networking is very distro-specific. Vagrant has support for many distros built-in: Debian, Ubuntu, Gentoo, and RedHat. The distro of your VM couldn't be detected, or isn't supported for host only networking. Most of the time this is simply due to the fact that no one has contributed back the SSH commands necessary to set this up. Please report a bug and this will be fixed for your distro. unsupported_host_name: |- Setting host name is currently only supported on Debian, Ubuntu and RedHat. If you'd like your guest OS to be supported, please open a ticket on the project. linux: attempting_halt: "Attempting graceful shutdown of linux..." mount_fail: "Failed to mount shared folders. `vboxsf` was not available." mount_nfs_fail: |- Mounting NFS shared folders failed. This is most often caused by the NFS client software not being installed on the guest machine. Please verify that the NFS client software is properly installed, and consult any resources specific to the linux distro you're using for more information on how to do this. solaris: attempting_halt: "Attempting graceful shutdown of solaris..." freebsd: attempting_halt: "Attempting graceful shutdown of FreeBSD..."