en: vagrant: general: moving_home_dir: "Moving old Vagrant home directory to new location: %{directory}" home_dir_migration_failed: |- Both an old and new Vagrant home directory exist. Only the new one will be used. Please merge the old directory into the new directory if you'd like to use the old data as well. Old: %{old} New: %{new} #------------------------------------------------------------------------------- # Translations for exception classes #------------------------------------------------------------------------------- errors: base_vm_not_found: The base VM with the name '%{name}' was not found. box_not_found: Box '%{name}' could not be found. chef_not_detected: |- The chef (either `chef-solo` or `chef-client`) binary was not found on the VM and is required for chef provisioning. Please verify that chef is installed and that the binary is available on the PATH. puppet_not_detected: |- The `puppet` binary was not found on the VM and is required for Puppet provisioning. Please verify that Puppet is installed and that the binary is available on the PATH. puppetd_not_detected: |- The `puppetd` binary was not found on the VM is required for Puppet Server provisioning. Please verify that Puppet is installed and that the binary is available on the PATH. config_validation: |- There was a problem with the configuration of Vagrant. The error message(s) are printed below: %{messages} deprecation: |- You are using a feature that has been removed in this version. Explanation: %{message} Note that this error message will not appear in the next version of Vagrant. dotfile_is_directory: |- The local file Vagrant uses to store data ".vagrant" already exists and is a directory! If you are in your home directory, then please run this command in another directory. If you aren't in a home directory, then please rename ".vagrant" to something else, or configure Vagrant to use another filename by modifying `config.vagrant.dotfile_name`. environment_locked: |- An instance of Vagrant is already running. Only one instance of Vagrant may run at any given time to avoid problems with VirtualBox inconsistencies occurring. Please wait for the other instance of Vagrant to end and then try again. guest: invalid_class: |- The specified guest class does not inherit from `Vagrant::Guest::Base`. The specified guest class must inherit from this class. The specified guest class was: %{guest} unknown_type: |- The specified guest type is unknown: %{guest}. Please change this to a proper value. unspecified: |- A VM guest type must be specified! This is done via the `config.vm.guest` configuration value. Please read the documentation online for more information. home_dir_not_accessible: |- The home directory you specified is not accessible. The home directory that Vagrant uses must be both readable and writable. You specified: %{home_path} interrupted: "Vagrant exited after cleanup due to external interrupt." multi_vm_required: "A multi-vm environment is required for name specification to this command." multi_vm_target_required: |- This command requires a specific VM name to target in a multi-VM environment. no_env: |- A Vagrant environment is required to run this command. Run `vagrant init` to set one up. port_collision_resume: |- This VM cannot be resumed, because the forwarded ports would collide with another running virtual machine. Normally, Vagrant will attempt to fix this for you but VirtualBox only allows forwarded ports to change if the VM is powered off. Therefore, please reload your VM or halt the other running VMs to continue. scp_unavailable: |- SSH server on the guest doesn't support SCP. Please install the necessary software to enable SCP on your guest operating system. ssh_authentication_failed: |- SSH authentication failed! This is typically caused by the public/private keypair for the SSH user not being properly set on the guest VM. Please verify that the guest VM is setup with the proper public key, and that the private key path for Vagrant is setup properly as well. ssh_bad_exit_status: |- The following SSH command responded with a non-zero exit status. Vagrant assumes that this means the command failed! %{command} ssh_connection_refused: |- SSH connection was refused! This usually happens if the VM failed to boot properly. Some steps to try to fix this: First, try reloading your VM with `vagrant reload`, since a simple restart sometimes fixes things. If that doesn't work, destroy your VM and recreate it with a `vagrant destroy` followed by a `vagrant up`. If that doesn't work, contact a Vagrant maintainer (support channels listed on the website) for more assistance. ssh_key_bad_permissions: |- The private key to connect to this box via SSH has invalid permissions set on it. The permissions of the private key should be set to 0600, otherwise SSH will ignore the key. Vagrant tried to do this automatically for you but failed. Please set the permissions on the following file to 0600 and then try running this command again: %{key_path} ssh_port_not_detected: |- Vagrant couldn't determine the SSH port for your VM! Vagrant attempts to automatically find a forwarded port that matches your `config.ssh.guest_port` (default: 22) value and uses this for SSH. Alternatively, if `config.ssh.port` is set, it will use this. However, in this case Vagrant was unable to find a forwarded port that matches the guest port and `config.ssh.port` is not set! Please make sure that you have a forwarded port that goes to the configured guest port value, or specify an explicit SSH port with `config.ssh.port`. ssh_unavailable: "`ssh` binary could not be found. Is an SSH client installed?" ssh_unavailable_windows: |- `vagrant ssh` isn't available on the Windows platform. The vagrant.ppk file for use with Putty is available at: %{key_path}.ppk To use this create a new Putty session for `vagrant@localhost` on port `%{ssh_port}`, in the Connection>SSH>Auth configuration section navigate to the vagrant.ppk file, select it, save the session for later use, and connect. For a more detailed guide please consult: http://vagrantup.com/docs/getting-started/setup/windows.html vagrantfile_exists: |- `Vagrantfile` already exists in this directory. Remove it before running `vagrant init`. vagrantfile_syntax_error: |- There is a syntax error in the following Vagrantfile. The syntax error message is reproduced below for convenience: %{file} vboxmanage_error: |- There was an error executing the following command with VBoxManage: %{command} For more information on the failure, enable detailed logging with VAGRANT_LOG. virtualbox_invalid_version: |- Vagrant has detected that you have a version of VirtualBox installed that is not supported. Please install one of the supported versions listed below to use Vagrant: %{supported_versions} virtualbox_not_detected: |- Vagrant could not detect VirtualBox! Make sure VirtualBox is properly installed. Vagrant uses the `VBoxManage` binary that ships with VirtualBox, and requires this to be available on the PATH. If VirtualBox is installed, please find the `VBoxManage` binary and add it to the PATH environmental variable. vm_creation_required: |- VM must be created before running this command. Run `vagrant up` first. vm_inaccessible: |- Your VM has become "inaccessible." Unfortunately, this is a critical error with VirtualBox that Vagrant can not cleanly recover from. Please open VirtualBox and clear out your inaccessible virtual machines or find a way to fix them. vm_no_match: |- No virtual machines matched the regular expression given. vm_not_found: |- A VM by the name of %{name} was not found. vm_not_running: |- VM must be running to open SSH connection. Run `vagrant up` to start the virtual machine. #------------------------------------------------------------------------------- # Translations for config validation errors #------------------------------------------------------------------------------- config: common: error_empty: "`%{field}` must be filled in." chef: run_list_empty: "Run list must not be empty." cookbooks_path_empty: "Must specify a cookbooks path for chef solo." server_url_empty: "Chef server URL must be populated." validation_key_path: "Validation key path must be valid path to your chef server validation key." ssh: private_key_missing: "`private_key_path` file must exist: %{path}" vm: base_mac_invalid: "Base MAC address for eth0/NAT must be set. Contact box maintainer for more information." boot_mode_invalid: "Boot mode must be one of: headless or gui" box_missing: "A box must be specified." box_not_found: "The box '%{name}' could not be found." network_invalid: |- The network type '%{type}' is not valid. Please use 'hostonly' or 'bridged'. network_ip_required: |- Host only networks require an IP as an argument. network_ip_invalid: |- The host only network IP '%{ip}' is invalid. network_ip_ends_one: |- The host only network IP '%{ip}' must not end in a 1, as this is reserved for the host machine. shared_folder_hostpath_missing: "Shared folder host path for '%{name}' doesn't exist: %{path}" shared_folder_nfs_owner_group: |- Shared folder '%{name}': NFS does not support the owner/group settings. provisioner_not_found: "The provisioner '%{shortcut}' doesn't exist." provisioner_invalid_class: "The provisioner '%{shortcut}' must inherit from `Vagrant::Provisioners::Base`." #------------------------------------------------------------------------------- # Translations for commands. e.g. `vagrant x` #------------------------------------------------------------------------------- commands: common: vm_not_created: "VM not created. Moving on..." vm_not_running: "VM is not currently running. Please bring it up to run this command." box: no_installed_boxes: "There are no installed boxes! Use `vagrant box add` to add some." init: success: |- A `Vagrantfile` has been placed in this directory. You are now ready to `vagrant up` your first virtual environment! Please read the comments in the Vagrantfile as well as documentation on `vagrantup.com` for more information on using Vagrant. status: aborted: |- The VM is in an aborted state. This means that it was abruptly stopped without properly closing the session. Run `vagrant up` to resume this virtual machine. If any problems persist, you may have to destroy and restart the virtual machine. inaccessible: |- The VM is inaccessible! This is a rare case which means that VirtualBox can't find your VM configuration. This usually happens when upgrading VirtualBox, moving to a new computer, etc. Please consult VirtualBox for how to handle this issue. output: |- Current VM states: %{states} %{message} not_created: |- The environment has not yet been created. Run `vagrant up` to create the environment. poweroff: |- The VM is powered off. To restart the VM, simply run `vagrant up` running: |- The VM is running. To stop this VM, you can run `vagrant halt` to shut it down forcefully, or you can run `vagrant suspend` to simply suspend the virtual machine. In either case, to restart it again, simply run `vagrant up`. saved: |- To resume this VM, simply run `vagrant up`. stuck: |- The VM is "stuck!" This is a very rare state which means that VirtualBox is unable to recover the current state of the VM. The only known solution to this problem is to restart your machine, sorry. listing: |- This environment represents multiple VMs. The VMs are all listed above with their current state. For more information about a specific VM, run `vagrant status NAME`. up: vm_created: "VM already created. Booting if it's not already running..." version: output: "Vagrant version %{version}" #------------------------------------------------------------------------------- # Translations for Vagrant middleware acions #------------------------------------------------------------------------------- actions: runner: waiting_cleanup: "Waiting for cleanup before exiting..." exit_immediately: "Exiting immediately, without cleanup!" vm: boot: booting: Booting VM... waiting: Waiting for VM to boot. This can take a few minutes. ready: VM booted and ready for use! failed: Failed to connect to VM! failed_to_boot: |- Failed to connect to VM via SSH. Please verify the VM successfully booted by looking at the VirtualBox GUI. bridged_networking: available: |- Available bridged network interfaces: bridging: |- Bridging adapter #%{adapter} to '%{bridge}' enabling: |- Enabling bridged network... preparing: |- Preparing bridged networking... check_box: not_found: Box %{name} was not found. Fetching box from specified URL... not_specified: |- No base box was specified! A base box is required as a staring point for every vagrant virtual machine. Please specify one in your Vagrantfile using `config.vm.box` does_not_exist: |- Specified box `%{name}` does not exist! The box must be added through the `vagrant box add` command. Please view the documentation associated with the command for more information. check_guest_additions: not_detected: |- No guest additions were detected on the base box for this VM! Guest additions are required for forwarded ports, shared folders, host only networking, and more. If SSH fails on this machine, please install the guest additions and repackage the box to continue. This is not an error message; everything may continue to work properly, in which case you may ignore this message. version_mismatch: |- The guest additions on this VM do not match the install version of VirtualBox! This may cause things such as forwarded ports, shared folders, and more to not work properly. If any of those things fail on this machine, please update the guest additions and repackage the box. Guest Additions Version: %{guest_version} VirtualBox Version: %{virtualbox_version} clear_forward_ports: deleting: Clearing any previously set forwarded ports... clear_network_interfaces: deleting: Clearing any previously set network interfaces... clear_shared_folders: deleting: Cleaning previously set shared folders... customize: failure: |- A customization command failed: %{command} The following error was experienced: %{error} Please fix this customization and try again. running: Running any VM customizations... destroy: destroying: Destroying VM and associated drives... destroy_network: destroying: Destroying unused networking interface... disable_networks: disabling: Disabling host only networks... discard_state: discarding: Discarding saved state of VM... export: create_dir: Creating temporary directory for export... exporting: Exporting VM... power_off: "The Vagrant virtual environment you are trying to package must be powered off." forward_ports: auto_empty: |- Vagrant found a port collision for the specified port and virtual machine. While this port was marked to be auto-corrected, the ports in the auto-correction range are all also used. VM: %{vm_name} Forwarded port: %{guest_port} => %{host_port} collision_error: |- Vagrant cannot forward the specified ports on this VM, since they would collide with another VirtualBox virtual machine's forwarded ports! The forwarded port to %{host_port} is already in use on the host machine. To fix this, modify your current projects Vagrantfile to use another port. Example, where '1234' would be replaced by a unique host port: config.vm.forward_port %{guest_port}, 1234 fixed_collision: |- Fixed port collision for %{guest_port} => %{host_port}. Now on port %{new_port}. forwarding: Forwarding ports... forwarding_entry: |- -- %{guest_port} => %{host_port} (adapter %{adapter}) non_nat: |- VirtualBox adapter #%{adapter} not configured as "NAT". Skipping: '%{name}'. privileged_ports: |- You are trying to forward to privileged ports (ports <= 1024). Most operating systems restrict this to only privileged process (typically processes running as an administrative user). This is a warning in case the port forwarding doesn't work. If any problems occur, please try a port higher than 1024. halt: force: |- Forcing shutdown of VM... graceful: |- Attempting graceful shutdown of VM... host_name: setting: "Setting host name..." import: importing: Importing base box '%{name}'... failure: |- The VM import failed! Try running `VBoxManage import` on the box file manually for more verbose error output. match_mac: matching: Matching MAC address for NAT networking... no_base_mac: |- No base MAC address was specified. This is required for the NAT networking to work properly (and hence port forwarding, SSH, etc.). Specifying this MAC address is typically up to the box and box maintiner. Please contact the relevant person to solve this issue. network: adapter_collision: |- More than one network have been assigned to the same adapter. Please make sure your networks you've configured in your Vagrantfile do not overlap. configuring: |- Configuring and enabling network interfaces... no_adapters: |- No available adapters on the virtual machine were found to accomodate for all configured networks. VirtualBox virtual machines have 8 network interfaces available usually, so please lower the number of networks to below 8. preparing: |- Preparing network interfaces based on configuration... host_only_network: collides: |- The specified host network collides with a non-hostonly network! This will cause your specified IP to be inaccessible. Please change the IP or name of your host only network to not match that of a bridged or non-hostonly network. creating: "Creating new host only network for environment..." enabling: "Enabling host only network..." not_found: |- The specified host network could not be found: '%{name}.' If the name specification is removed, Vagrant will create a new host only network for you. Alternatively, please create the specified network manually. preparing: "Preparing host only network..." nfs: host_required: |- A host class is required for NFS shared folders. By default, these are auto-detected, but can be overridden with `config.vagrant.host`. There is currently no host class loaded. no_host_network: |- NFS shared folders requires that host only networking is enabled. Please enable host only networking via `config.vm.network`. not_supported: |- The host class is reporting that NFS is not supported by this host, or `nfsd` may not be installed. Please verify that `nfsd` is installed on your machine, and retry. exporting: Exporting NFS shared folders... mounting: Mounting NFS shared folders... persist: dotfile_error: |- The dotfile which Vagrant uses to store the UUID of the project's virtual machine already exists and is not a file! The dotfile is currently configured to be '%{dotfile_path}' To change this value, please see `config.vagrant.dotfile_name` Are you trying to use Vagrant from your home directory? This is the leading cause of this error message. To resolve this, simply use a different directory. Or, if you really want to run Vagrant from your home directory, modify the `config.vagrant.dotfile_name` configuration key. persisting: "Persisting the VM UUID (%{uuid})..." provision: beginning: "Running provisioner: %{provisioner}..." resume: resuming: Resuming suspended VM... share_folders: creating: Creating shared folders metadata... mounting: Mounting shared folders... mounting_entry: "-- %{name}: %{guest_path}" nomount_entry: "-- %{name}: Automounting disabled." suspend: suspending: Saving VM state and suspending execution... box: destroy: destroying: "Deleting box '%{name}'..." download: with: "Downloading with %{class}..." cleaning: "Cleaning up downloaded box..." unknown_type: "Unknown or unsupported URI type given for box download." unpackage: extracting: "Extracting box..." already_exists: |- A box already exists under the name of '%{name}'. This may or may not be the same box you are trying to add. Please use another name or remove the previous box then try to add it again. untar_failure: |- Failed to untar the box file. This is usually because you're attempting to add a box that isn't a valid box file. Please double check that the box file is properly packaged. verify: verifying: "Verifying box..." failed: |- The box file you're attempting to add is invalid. This can be commonly attributed to typos in the path given to the box add command. Another common case of this is invalid packaging of the box itself. general: package: packaging: "Packaging additional file: %{file}" compressing: "Compressing package to: %{tar_path}" output_exists: |- The specified file to save the package as already exists. Please remove this file or specify a different file name for outputting. requires_directory: |- A directory was not specified to package. This should never happen and is a result of an internal inconsistency. include_file_missing: |- Package include file doesn't exist: %{file} downloaders: file: download: "Copying box to temporary location..." file_missing: "The specified path to a file doesn't exist." http: download: "Downloading box: %{url}" socket_error: |- An error occurred while trying to download the specified box. This most often happens if there is no internet connection or the address is invalid. status_error: |- Bad status code: %{status} Please verify that the box exists and is accessible. Also verify that this computer is properly connected to the internet. hosts: bsd: nfs_export: prepare: "Preparing to edit /etc/exports. Administrator privileges will be required..." linux: nfs_export: prepare: "Preparing to edit /etc/exports. Administrator privileges will be required..." arch: nfs_export: prepare: "Preparing to edit /etc/exports. Administrator privileges will be required..." provisioners: chef: json: "Generating chef JSON and uploading..." client_key_folder: "Creating folder to hold client key..." upload_validation_key: "Uploading chef client validation key..." upload_encrypted_data_bag_secret_key: "Uploading chef encrypted data bag secret key..." running_client: "Running chef-client..." running_solo: "Running chef-solo..." invalid_provisioner: "Vagrant::Provisioners::Chef is not a valid provisioner! Use ChefSolo or ChefClient instead." not_detected: |- The `%{binary}` binary appears to not be in the PATH of the guest. This could be because the PATH is not properly setup or perhaps chef is not installed on this guest. Chef provisioning can not continue without chef properly installed. server_url_required: |- Chef server provisioning requires that the `config.chef.chef_server_url` be set to the URL of your chef server. Examples include "http://12.12.12.12:4000" and "http://myserver.com:4000" (the port of course can be different, but 4000 is the default) server_validation_key_required: |- Chef server provisioning requires that the `config.chef.validation_key_path` configuration be set to a path on your local machine of the validation key used to register the VM with the chef server. server_validation_key_doesnt_exist: |- The validation key set for `config.chef.validation_key_path` does not exist! This file needs to exist so it can be uploaded to the virtual machine. puppet: not_detected: |- The `%{binary}` binary appears to not be in the PATH of the guest. This could be because the PATH is not properly setup or perhaps Puppet is not installed on this guest. Puppet provisioning can not continue without Puppet properly installed. running_puppet: "Running Puppet with %{manifest}..." manifest_missing: "The Puppet %{manifest} manifest is missing. You cannot configure this box." manifests_path_missing: "The manifests path specified for Puppet does not exist: %{path}" module_path_missing: "The configured module path doesn't exist: %{path}" puppet_server: not_detected: |- The `%{binary}` binary appears to not be in the PATH of the guest. This could be because the PATH is not properly setup or perhaps Puppet is not installed on this guest. Puppet provisioning can not continue without Puppet properly installed. running_puppetd: "Running Puppet agent..." shell: args_not_string: "Shell provisioner `args` must be a string." path_and_inline_set: "Only one of `path` or `inline` may be set." no_path_or_inline: "One of `path` or `inline` must be set." path_invalid: "`path` for shell provisioner does not exist on the host system: %{path}" upload_path_not_set: "`upload_path` must be set for the shell provisioner." guest: base: unsupported_configure_networks: |- Networking features require support that is dependent on the operating system running within the guest virtual machine. Vagrant has built-in support for many operating systems: Debian, Ubuntu, Gentoo, and RedHat. The distro of your VM couldn't be detected or doesn't support networking features. Most of the time this is simply due to the fact that no one has contributed back the logic necessary to set this up. Please report a bug as well as the box you're using. unsupported_host_name: |- Setting host name is currently only supported on Debian, Ubuntu and RedHat. If you'd like your guest OS to be supported, please open a ticket on the project. unsupported_nfs: |- Vagrant doesn't support mounting NFS shared folders for your specific guest operating system yet, or possibly couldn't properly detect the operating system on the VM. Most of the time this is simply due to the fact that no one has contributed back the logic necessary to set this up. Please report a bug as well as the box you're using. unsupported_halt: |- Vagrant doesn't support graceful shutdowns for your specific guest operating system yet, or possibly couldn't properly detect the operating system on the VM. Most of the time this is simply due to the fact that no one has contributed back the logic necessary to set this up. Please report a bug as well as the box you're using. unsupported_shared_folder: |- Vagrant doesn't support mounting shared folders for your specific guest operating system yet, or possibly couldn't properly detect the operating system on the VM. Most of the time this is simply due to the fact that no one has contributed back the logic necessary to set this up. Please report a bug as well as the box you're using. linux: mount_fail: "Failed to mount shared folders. `vboxsf` was not available." mount_nfs_fail: |- Mounting NFS shared folders failed. This is most often caused by the NFS client software not being installed on the guest machine. Please verify that the NFS client software is properly installed, and consult any resources specific to the linux distro you're using for more information on how to do this.