## 0.7.2 (February 8, 2011) - Update JSON dependency to 1.5.1, which works with Ruby 1.9 on Windows. - Fix sudo issues on sudo < 1.7.0 (again). - Fix race condition in SSH, which specifically manifested itself in the chef server provisioner. [GH-295] - Change sudo shell to use `bash` (configurable). [GH-301] - Can now set mac address of host only network. [GH-294] - NFS shared folders with spaces now work properly. [GH-293] - Failed SSH commands now show output in error message. [GH-285] ## 0.7.1 (January 28, 2011) - Change error output with references to VirtualBox 3.2 to 4.0. - Internal SSH through net-ssh now uses `IdentitiesOnly` thanks to upstream net-ssh fix. - Fix issue causing warnings to show with `forwardx11` enabled for SSH. [GH-279] - FreeBSD support for host only networks, NFS, halting, etc. [GH-275] - Make SSH commands which use sudo compatible with sudo < 1.7.0. [GH-278] - Fix broken puppet server provisioner which called a nonexistent method. - Default SSH host changed from `localhost` to `127.0.0.1` since `localhost` is not always loopback. - New `shell` provisioner which simply uploads and executes a script as root on the VM. - Gentoo host only networking no longer fails if alrady setup. [GH-286] - Set the host name of your guest OS with `config.vm.host_name` [GH-273] - `vagrant ssh-config` now outputs the configured `config.ssh.host` ## 0.7.0 (January 19, 2011) - VirtualBox 4.0 support. Support for VirtualBox 3.2 is _dropped_, since the API is so different. Stay with the 0.6.x series if you have VirtualBox 3.2.x. - Puppet server provisioner. [GH-262] - Use numeric uid/gid in mounting shared folders to increase portability. [GH-252] - HTTP downloading follows redirects. [GH-163] - Downloaders have clearer output to note what they're doing. - Shared folders with no guest path are not automounted. [GH-184] - Boxes downloaded during `vagrant up` reload the Vagrantfile config, which fixes a problem with box settings not being properly loaded. [GH-231] - `config.ssh.forward_x11` to enable the ForwardX11 SSH option. [GH-255] - Vagrant source now has a `contrib` directory where contributions of miscellaneous addons for Vagrant will be added. - Vagrantfiles are now loaded only once (instead of 4+ times) [GH-238] - Ability to move home vagrant dir (~/.vagrant) by setting VAGRANT_HOME environmental variable. - Removed check and error for the "OSE" version of VirtualBox, since with VirtualBox 4 this distinction no longer exists. - Ability to specify proxy settings for chef. [GH-169] - Helpful error message shown if NFS mounting fails. [GH-135] - Gentoo guests now support host only networks. [GH-240] - RedHat (CentOS included) guests now support host only networks. [GH-260] - New Vagrantfile syntax for enabling and configuring provisioners. This change is not backwards compatible. [GH-265] - Provisioners are now RVM-friendly, meaning if you installed chef or puppet with an RVM managed Ruby, Vagrant now finds then. [GH-254] - Changed the unused host only network destroy mechanism to check for uselessness after the VM is destroyed. This should result in more accurate checks. - Networks are no longer disabled upon halt/destroy. With the above change, its unnecessary. - Puppet supports `module_path` configuration to mount local modules directory as a shared folder and configure puppet with it. [GH-270] - `ssh-config` now outputs `127.0.0.1` as the host instead of `localhost`. ## 0.6.9 (December 21, 2010) - Puppet provisioner. [GH-223] - Solaris system configurable to use `sudo`. - Solaris system registered, so it can be set with `:solaris`. - `vagrant package` include can be a directory name, which will cause the contents to be recursively copied into the package. [GH-241] - Arbitrary options to puppet binary can be set with `config.puppet.options`. [GH-242] - BSD hosts use proper GNU sed syntax for clearing NFS shares. [GH-243] - Enumerate VMs in a multi-VM environment in order they were defined. [GH-244] - Check for VM boot changed to use `timeout` library, which works better with Windows. - Show special error if VirtualBox not detected on 64-bit Windows. - Show error to Windows users attempting to use host only networking since it doesn't work yet. ## 0.6.8 (November 30, 2010) - Network interfaces are now up/down in distinct commands instead of just restarting "networking." [GH-192] - Add missing translation for chef binary missing. [GH-203] - Fix default settings for Opscode platform and comments. [GH-213] - Blank client name for chef server now uses FQDN by default, instead of "client" [GH-214] - Run list can now be nil, which will cause it to sync with chef server (when chef server is enabled). [GH-214] - Multiple NFS folders now work on linux. [GH-215] - Add translation for state "stuck" which is very rare. [GH-218] - virtualbox gem dependency minimum raised to 0.7.6 to verify FFI < 1.0.0 is used. - Fix issue where box downloading from `vagrant up` didn't reload the box collection. [GH-229] ## 0.6.7 (November 3, 2010) - Added validation to verify that a box is specified. - Proper error message when box is not found for `config.vm.box`. [GH-195] - Fix output of `vagrant status` with multi-vm to be correct. [GH-196] ## 0.6.6 (October 14, 2010) - `vagrant status NAME` works once again. [GH-191] - Conditional validation of Vagrantfile so that some commands don't validate. [GH-188] - Fix "junk" output for ssh-config. [GH-189] - Fix port collision handling with greater than two VMs. [GH-185] - Fix potential infinite loop with root path if bad CWD is given to environment. ## 0.6.5 (October 8, 2010) - Validations on base MAC address to avoid situation described in GH-166, GH-181 from ever happening again. - Properly load sub-VM configuration on first-pass of config loading. Solves a LOT of problems with multi-VM. [GH-166] [GH-181] - Configuration now only validates on final Vagrantfile proc, so multi-VM validates correctly. - A nice error message is given if ".vagrant" is a directory and therefore can't be accessed. [GH-172] - Fix plugin loading in a Rails 2.3.x project. [GH-176] ## 0.6.4 (October 4, 2010) - Default VM name is now properly the parent folder of the working directory of the environment. - Added method to `TestHelpers` to assist with testing new downloaders. - `up --no-provision` works again. This disables provisioning during the boot process. - Action warden doesn't do recovery process on `SystemExit` exceptions, allowing the double ctrl-C to work properly again. [related to GH-166] - Initial Vagrantfile is now heavily commented with various available options. [GH-171] - Box add checks if a box already exists before the download. [GH-170] - NFS no longer attempts to clean exports file if VM is not created, which was causing a stack trace during recovery. [related to GH-166] - Basic validation added for Chef configuration (both solo and server). - Top config class is now available in all `Vagrant::Config::Base` subclasses, which is useful for config validation. - Subcommand help shows proper full command in task listing. [GH-168] - SSH gives error message if `ssh` binary is not found. [GH-161] - SSH gives proper error message if VM is not running. [GH-167] - Fix some issues with undefined constants in command errors. ## 0.6.1, 0.6.2, 0.6.3 (September 27, 2010) A lot of quick releases which all were to fix issues with Ruby 1.8.7 compatibility. ## 0.6.0 (September 27, 2010) - VM name now defaults to the name of the containing folder, plus a timestamp. This should make it easier to identify VMs in the VirtualBox GUI. - Exposed Vagrant test helpers in `Vagrant::TestHelpers` for plugins to easily test themselves against Vagrant environments. - **Plugins** have landed. Plugins are simply gems which have a `vagrant_init.rb` file somewhere in their load path. Please read the documentation on vagrantup.com before attempting to create a plugin (which is very easy) for more information on how it all works and also some guidelines. - `vagrant package` now takes a `--vagrantfile` option to specify a Vagrantfile to package. The `--include` approach for including a Vagrantfile no longer works (previously built boxes will continue to work). - `vagrant package` has new logic with regards to the `--include` option depending on if the file path is relative or absolute (they can be intermixed): * _Relative_ paths are copied directly into the box, preserving their path. So `--include lib/foo` would be in the box as "lib/foo" * _Absolute_ paths are simply copied files into the root of the box. So `--include /lib/foo` would be in the box as "foo" - "vagrant_main" is no longer the default run list. Instead, chef run list starts empty. It is up to you to specify all recipes in the Vagrantfile now. - Fixed various issues with certain action middleware not working if the VM was not created. - SSH connection is retried 5 times if there is a connection refused. Related to GH-140. - If `http_proxy` environmental variable is set, it will be used as the proxy box adding via http. - Remove `config.ssh.password`. It hasn't been used for a few versions now and was only kept around to avoid exceptions in Vagrantfiles. - Configuration is now validated so improper input can be found in Vagrantfiles. - Fixed issue with not detecting Vagrantfile at root directory ("/"). - Vagrant now gives a nice error message if there is a syntax error in any Vagrantfile. [GH-154] - The format of the ".vagrant" file which stores persisted VMs has changed. This is **backwards incompatible**. Will provide an upgrade utility prior to 0.6 launch. - Every [expected] Vagrant error now exits with a clean error message and a unique exit status, and raises a unique exception (if you're scripting Vagrant). - Added I18n gem dependency for pulling strings into clean YML files. Vagrant is now localizable as a side effect! Translations welcome. - Fixed issue with "Waiting for cleanup" message appearing twice in some cases. [GH-145] - Converted CLI to use Thor. As a tradeoff, there are some backwards incompatibilities: * `vagrant package` - The `--include` flag now separates filenames by spaces, instead of by commas. e.g. `vagrant package --include x y z` * `vagrant ssh` - If you specify a command to execute using the `--execute` flag, you may now only specify one command (before you were able to specify an arbitrary amount). e.g. `vagrant ssh -e "echo hello"` * `vagrant ssh-config` has become `vagrant ssh_config` due to a limitation in Thor. ## 0.5.4 (September 7, 2010) - Fix issue with the "exec failed" by running on Tiger as well. - Give an error when downloading a box which already exists prior to actually downloading the box. ## 0.5.3 (August 23, 2010) - Add erubis as a dependency since its rendering of `erb` is sane. - Fixed poorly formatted Vagrantfile after `vagrant init`. [GH-142] - Fixed NFS not working properly with multiple NFS folders. - Fixed chef solo provision to work on Windows. It was expanding a linux path which prepended a drive letter onto it. ## 0.5.2 (August 3, 2010) - `vagrant up` can be used as a way to resume the VM as well (same as `vagrant resume`). [GH-134] - Sudo uses "-E" flag to preserve environment for chef provisioners. This fixes issues with CentOS. [GH-133] - Added "IdentitiesOnly yes" to options when `vagrant ssh` is run to avoid "Too Many Authentication Failures" error. [GH-131] - Fix regression with `package` not working. [GH-132] - Added ability to specify box url in `init`, which populates the Vagrantfile with the proper `config.vm.box_url`. ## 0.5.1 (July 31, 2010) - Allow specifying cookbook paths which exist only on the VM in `config.chef.cookbooks_path`. This is used for specifying cookbook paths when `config.chef.recipe_url` is used. [GH-130] See updated chef solo documentation for more information on this. - No longer show "Disabling host only networks..." if no host only networks are destroyed. Quiets `destroy`, `halt`, etc output a bit. - Updated getting started guide to be more up to date and generic. [GH-125] - Fixed error with doing a `vagrant up` when no Vagrantfile existed. [GH-128] - Fixed NFS erroring when NFS wasn't even enabled if `/etc/exports` doesn't exist. [GH-126] - Fixed `vagrant resume` to properly resume a suspended VM. [GH-122] - Fixed `halt`, `destroy`, `reload` to where they failed if the VM was in a saved state. [GH-123] - Added `config.chef.recipe_url` which allows you to specify a URL to a gzipped tar file for chef solo to download cookbooks. See the [chef-solo docs](http://wiki.opscode.com/display/chef/Chef+Solo#ChefSolo-RunningfromaURL) for more information. [GH-121] - Added `vagrant box repackage` which repackages boxes which have been added. This is useful in case you want to redistribute a base box you have but may have lost the actual "box" file. [GH-120] ## Previous The changelog began with version 0.5.1 so any changes prior to that can be seen by checking the tagged releases and reading git commit messages.