diff --git a/src/platforms/f4discovery/platform.c b/src/platforms/f4discovery/platform.c
index bc781e2..8e3b9d3 100644
--- a/src/platforms/f4discovery/platform.c
+++ b/src/platforms/f4discovery/platform.c
@@ -62,7 +62,7 @@ void platform_init(void)
 		scb_reset_core();
 	}
 
-	rcc_clock_setup_hse_3v3(&hse_8mhz_3v3[CLOCK_3V3_48MHZ]);
+	rcc_clock_setup_hse_3v3(&rcc_hse_8mhz_3v3[RCC_CLOCK_3V3_48MHZ]);
 
 	/* Enable peripherals */
 	rcc_periph_clock_enable(RCC_OTGFS);
diff --git a/src/platforms/hydrabus/platform.c b/src/platforms/hydrabus/platform.c
index 3993a10..c6a60c2 100644
--- a/src/platforms/hydrabus/platform.c
+++ b/src/platforms/hydrabus/platform.c
@@ -46,7 +46,7 @@ void platform_init(void)
 		scb_reset_core();
 	}
 
-	rcc_clock_setup_hse_3v3(&hse_8mhz_3v3[CLOCK_3V3_48MHZ]);
+	rcc_clock_setup_hse_3v3(&rcc_hse_8mhz_3v3[RCC_CLOCK_3V3_48MHZ]);
 
 	/* Enable peripherals */
 	rcc_peripheral_enable_clock(&RCC_AHB2ENR, RCC_AHB2ENR_OTGFSEN);
@@ -103,4 +103,3 @@ void platform_request_boot(void)
 	SYSCFG_MEMRM &= ~3;
 	SYSCFG_MEMRM |=  1;
 }
-
diff --git a/src/platforms/native/platform.c b/src/platforms/native/platform.c
index 1804e17..c69eea3 100644
--- a/src/platforms/native/platform.c
+++ b/src/platforms/native/platform.c
@@ -222,7 +222,7 @@ static void adc_init(void)
 	gpio_set_mode(GPIOB, GPIO_MODE_INPUT,
 			GPIO_CNF_INPUT_ANALOG, GPIO0);
 
-	adc_off(ADC1);
+	adc_power_off(ADC1);
 	adc_disable_scan_mode(ADC1);
 	adc_set_single_conversion_mode(ADC1);
 	adc_disable_external_trigger_regular(ADC1);
@@ -236,7 +236,7 @@ static void adc_init(void)
 		__asm__("nop");
 
 	adc_reset_calibration(ADC1);
-	adc_calibration(ADC1);
+	adc_calibrate(ADC1);
 }
 
 const char *platform_target_voltage(void)
diff --git a/src/platforms/native/platform.h b/src/platforms/native/platform.h
index c18a8c8..a261cbc 100644
--- a/src/platforms/native/platform.h
+++ b/src/platforms/native/platform.h
@@ -128,7 +128,7 @@
 	              GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, USBUSART_TX_PIN); \
 } while(0)
 
-#define USB_DRIVER stm32f103_usb_driver
+#define USB_DRIVER st_usbfs_v1_usb_driver
 #define USB_IRQ    NVIC_USB_LP_CAN_RX0_IRQ
 #define USB_ISR    usb_lp_can_rx0_isr
 /* Interrupt priorities.  Low numbers are high priority.
diff --git a/src/platforms/native/usbdfu.c b/src/platforms/native/usbdfu.c
index e370cf9..020a976 100644
--- a/src/platforms/native/usbdfu.c
+++ b/src/platforms/native/usbdfu.c
@@ -60,7 +60,7 @@ int main(void)
 	gpio_set_mode(LED_PORT, GPIO_MODE_OUTPUT_2_MHZ,
 			GPIO_CNF_OUTPUT_PUSHPULL, LED_0 | LED_1 | LED_2);
 
-	dfu_init(&stm32f103_usb_driver, DFU_MODE);
+	dfu_init(&st_usbfs_v1_usb_driver, DFU_MODE);
 
 	/* Configure the USB pull up pin. */
 	gpio_set(GPIOA, GPIO8);
diff --git a/src/platforms/stlink/dfu_upgrade.c b/src/platforms/stlink/dfu_upgrade.c
index 804144a..aeb559d 100644
--- a/src/platforms/stlink/dfu_upgrade.c
+++ b/src/platforms/stlink/dfu_upgrade.c
@@ -58,7 +58,7 @@ int main(void)
 
 	if (rev > 1) /* Reconnect USB */
 		gpio_set(GPIOA, GPIO15);
-	dfu_init(&stm32f103_usb_driver, UPD_MODE);
+	dfu_init(&st_usbfs_v1_usb_driver, UPD_MODE);
 
 	dfu_main();
 }
diff --git a/src/platforms/stlink/platform.h b/src/platforms/stlink/platform.h
index f531444..5cb29cc 100644
--- a/src/platforms/stlink/platform.h
+++ b/src/platforms/stlink/platform.h
@@ -82,7 +82,7 @@
 	gpio_set_mode(USBUSART_PORT, GPIO_MODE_OUTPUT_2_MHZ, \
 	              GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, USBUSART_TX_PIN);
 
-#define USB_DRIVER      stm32f103_usb_driver
+#define USB_DRIVER      st_usbfs_v1_usb_driver
 #define USB_IRQ	        NVIC_USB_LP_CAN_RX0_IRQ
 #define USB_ISR	        usb_lp_can_rx0_isr
 /* Interrupt priorities.  Low numbers are high priority.
diff --git a/src/platforms/stlink/stlink_common.c b/src/platforms/stlink/stlink_common.c
index 487563d..b23a345 100644
--- a/src/platforms/stlink/stlink_common.c
+++ b/src/platforms/stlink/stlink_common.c
@@ -75,7 +75,7 @@ uint32_t detect_rev(void)
 			rev = 1;
 		/* On Rev > 0 unconditionally activate MCO on PORTA8 with HSE! */
 		RCC_CFGR &= ~(0xf << 24);
-		RCC_CFGR |= (RCC_CFGR_MCO_HSECLK << 24);
+		RCC_CFGR |= (RCC_CFGR_MCO_HSE << 24);
 		gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
 		GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO8);
 	}
diff --git a/src/platforms/stlink/usbdfu.c b/src/platforms/stlink/usbdfu.c
index fca3bf6..d016075 100644
--- a/src/platforms/stlink/usbdfu.c
+++ b/src/platforms/stlink/usbdfu.c
@@ -75,7 +75,7 @@ int main(void)
 
 	if (rev > 1)
 		gpio_set(GPIOA, GPIO15);
-	dfu_init(&stm32f103_usb_driver, DFU_MODE);
+	dfu_init(&st_usbfs_v1_usb_driver, DFU_MODE);
 
 	dfu_main();
 }
diff --git a/src/platforms/stm32/traceswo.c b/src/platforms/stm32/traceswo.c
index a2e704d..5007378 100644
--- a/src/platforms/stm32/traceswo.c
+++ b/src/platforms/stm32/traceswo.c
@@ -59,7 +59,7 @@ void traceswo_init(void)
 	timer_ic_set_polarity(TRACE_TIM, TIM_IC2, TIM_IC_FALLING);
 
 	/* Trigger on Filtered Timer Input 1 (TI1FP1) */
-	timer_slave_set_trigger(TRACE_TIM, TIM_SMCR_TS_IT1FP1);
+	timer_slave_set_trigger(TRACE_TIM, TIM_SMCR_TS_TI1FP1);
 
 	/* Slave reset mode: reset counter on trigger */
 	timer_slave_set_mode(TRACE_TIM, TIM_SMCR_SMS_RM);
diff --git a/src/platforms/stm32/usbuart.c b/src/platforms/stm32/usbuart.c
index a4a772e..0d1772a 100644
--- a/src/platforms/stm32/usbuart.c
+++ b/src/platforms/stm32/usbuart.c
@@ -72,7 +72,7 @@ void usbuart_init(void)
 	timer_set_mode(USBUSART_TIM, TIM_CR1_CKD_CK_INT,
 			TIM_CR1_CMS_EDGE, TIM_CR1_DIR_UP);
 	timer_set_prescaler(USBUSART_TIM,
-			rcc_ppre2_frequency / USBUART_TIMER_FREQ_HZ * 2 - 1);
+			rcc_apb2_frequency / USBUART_TIMER_FREQ_HZ * 2 - 1);
 	timer_set_period(USBUSART_TIM,
 			USBUART_TIMER_FREQ_HZ / USBUART_RUN_FREQ_HZ - 1);
 
diff --git a/src/platforms/swlink/platform.h b/src/platforms/swlink/platform.h
index 8c2be74..748c31f 100644
--- a/src/platforms/swlink/platform.h
+++ b/src/platforms/swlink/platform.h
@@ -74,7 +74,7 @@
 	              GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, USBUSART_TX_PIN); \
 } while (0)
 
-#define USB_DRIVER      stm32f103_usb_driver
+#define USB_DRIVER      st_usbfs_v1_usb_driver
 #define USB_IRQ         NVIC_USB_LP_CAN_RX0_IRQ
 #define USB_ISR         usb_lp_can_rx0_isr
 /* Interrupt priorities.  Low numbers are high priority.
diff --git a/src/platforms/swlink/usbdfu.c b/src/platforms/swlink/usbdfu.c
index f716653..daf73f3 100644
--- a/src/platforms/swlink/usbdfu.c
+++ b/src/platforms/swlink/usbdfu.c
@@ -83,7 +83,7 @@ int main(void)
 	systick_interrupt_enable();
 	systick_counter_enable();
 
-	dfu_init(&stm32f103_usb_driver, DFU_MODE);
+	dfu_init(&st_usbfs_v1_usb_driver, DFU_MODE);
 
 	dfu_main();
 }