diff --git a/src/platforms/hosted/Readme.md b/src/platforms/hosted/Readme.md
new file mode 100644
index 0000000..bfbfaf6
--- /dev/null
+++ b/src/platforms/hosted/Readme.md
@@ -0,0 +1,54 @@
+# PC-Hosted BMP
+Compile in src with "make PROBE_HOST=hosted"
+
+## Description
+PC-hosted BMP run on the PC and compiles as "blackmagic". When started,
+it either presents a list of available probes or starts the BMP process
+if either only one probe is attached to the PC or enough information is
+given on the command line to select one of several probes.
+
+When started without any other argument beside the probe selection, a
+GDB server is started as port 2000 and up. Connect to the server as you would
+connect to the BMP with the CDCACM GDB serial server. GDB functionality
+is the same, monitor option may vary.
+
+More arguments allow to
+### print information on the connected target "blackmagiv -t"
+### directly flash a binary file at 0x0800000  "blackmagic <file.bin>"
+or with the -S argument at some other address
+### read flash to binary file "blackmagic -r <file>.bin
+### verify flash against binary file "blackmagic -V <file>.bin
+
+Use "blackmagic -h" to see all options.
+
+## Used libraries:
+### libusb
+### libftdi, for FTDI support
+### hidapi-libusb, for CMSIS-DAP support
+
+## Supported debuggers
+REMOTE_BMP is a "normal" BMP usb connected
+
+|   Debugger   | Speed | Remarks
+| ------------ | ----- | ------
+| REMOTE_BMP   |  +++  | Requires recent firmware for decent speed
+| ST-Link V3   | ++++  | Requires recent firmware, Only STM32 devices supported!
+| ST-Link V2   |  +++  | Requires recent firmware, No CDCACM uart! Cortex only!
+| ST-Link V2/1 |  +++  | Requires recent firmware, Cortex only!
+| CMSIS-DAP    |  +++  | Speed varies with MCU implementing CMSIS-DAP
+| FTDI MPSSE   |   ++  | Requires a device descrition
+| JLINK        |    -  | Usefull to add BMP support for MCUs with built-in JLINK
+
+## Feedback
+### Issues and Pull request on https://github.com/blacksphere/blackmagic/
+### Discussions on Discord.
+You can find the Discord link here: https://1bitsquared.com/pages/chat
+### Blackmagic mailing list http://sourceforge.net/mail/?group_id=407419
+
+## Known deficiencies
+### For REMOTE_BMP
+#### On windows, the device node must be given on the command line
+Finding the device from USB VID/PID/Serial in not yet implemented
+### FTDI MPSSE
+#### No auto detection
+Cable description must be given on the command line