From af3f20a218ee6ebb0e334bc473dfc4103cb37074 Mon Sep 17 00:00:00 2001 From: Richard Eoin Meadows Date: Mon, 19 Aug 2013 15:41:31 +0100 Subject: [PATCH] Fixed line endings in README --- hardware/contrib/richardeoin/README.md | 33 +++++++++++++------------- 1 file changed, 17 insertions(+), 16 deletions(-) diff --git a/hardware/contrib/richardeoin/README.md b/hardware/contrib/richardeoin/README.md index abcb279..f3158c7 100644 --- a/hardware/contrib/richardeoin/README.md +++ b/hardware/contrib/richardeoin/README.md @@ -1,15 +1,18 @@ This variant attempts to be as faithful to the Blackmagic mini as possible, but also has several diferences. -![Blackmagic richardeoin PCB](blackmagic_richardeoin_board.png "Blackmagic richardeoin PCB") +![Blackmagic richardeoin PCB](blackmagic_richardeoin_board.png + "Blackmagic richardeoin PCB") ## Details -* The schematic and board have both been designed using Cadsoft EAGLE v6.4.0. +* The schematic and board have both been designed using Cadsoft EAGLE + v6.4.0. * The board size is 40mm x 16mm. -* The programming connector is an ARM 10-PIN Interface as described [here](http://www.keil.com/support/man/docs/ulink2/ulink2_hw_connectors.htm). +* The programming connector is an ARM 10-PIN Interface as described + [here](http://www.keil.com/support/man/docs/ulink2/ulink2_hw_connectors.htm). ## Differences @@ -19,11 +22,15 @@ Makes reflow soldering much easier. ### Includes Level Translator -This board incorporates the same level translator used in the full-sized Blackmagic, so it can be used to safely program 2.7V or 1.8V systems. +This board incorporates the same level translator used in the +full-sized Blackmagic, so it can be used to safely program 2.7V or +1.8V systems. ### USART Connector -The STM32F103's USART1 peripheral is broken out into a 0.1" header. The hole centres are [slightly offset to allow a press-fit](https://www.sparkfun.com/tutorials/114). +The STM32F103's USART1 peripheral is broken out into a 0.1" +header. The hole centres are +[slightly offset to allow a press-fit](https://www.sparkfun.com/tutorials/114). ### BOOT0 Button @@ -37,14 +44,8 @@ interface. * [Parts List](Parts.md) -Parts Cost (Approximate): £14 + VAT ([uk.farnell.com](http://uk.farnell.com) August 2013) -Programming Cable: £8.49 + VAT ([uk.farnell.com](http://uk.farnell.com/samtec/ffsd-05-d-06-00-01-n/ribbon-cable-idc-152-4mm-grey-10way/dp/1667659) August 2013) - - - - - - - - - +Parts Cost (Approximate): £14 + VAT +([uk.farnell.com](http://uk.farnell.com) August 2013) Programming +Cable: £8.49 + VAT +([uk.farnell.com](http://uk.farnell.com/samtec/ffsd-05-d-06-00-01-n/ribbon-cable-idc-152-4mm-grey-10way/dp/1667659) +August 2013)