This variant attempts to be as faitful to the Blackmagic mini as
possible, but also has several diferences.

The schematic and board have both been designed using Cadsoft EAGLE v6.4.0

### Differences

#### Uses 0603 [1608 Metric] components

Makes reflow soldering much easier.

#### Includes Level Translator

This board incorporates the same level translator used in the full-sized Blackmagic, so it can be used to safely program 2.7V or 1.8V systems.

#### USART Connector

The STM32F103's USART1 peripheral is broken out into a 0.1" header. The hole centres are [slightly offset to allow a press-fit](https://www.sparkfun.com/tutorials/114).

#### BOOT0 Button

As well as the standard button for entering USB DFU mode, this variant
also provides a button for pulling the BOOT0 pin high to activate the
STM32 SystemMemory bootloeader. This means that /scripts/bootprog.py
can be used to program and reprogram the chip over the USART1
interface.

### Parts and Costings

* [Parts List][Parts.md]

Parts Cost (Approximate): £14 + VAT ([uk.farnell.com](uk.farnell.com) August 2013)
Programming Cable: £8.49 + VAT ([uk.farnell.com](http://uk.farnell.com/samtec/ffsd-05-d-06-00-01-n/ribbon-cable-idc-152-4mm-grey-10way/dp/1667659) August 2013)3D