jiti-meet/debian/jitsi-meet-turnserver.postinst

#!/bin/bash
# postinst script for jitsi-meet-turnserver
#
# see: dh_installdeb(1)

set -e

# summary of how this script can be called:
#        * <postinst> `configure' <most-recently-configured-version>
#        * <old-postinst> `abort-upgrade' <new version>
#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
#          <new-version>
#        * <postinst> `abort-remove'
#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
#          <failed-install-package> <version> `removing'
#          <conflicting-package> <version>
# for details, see http://www.debian.org/doc/debian-policy/ or
# the debian-policy package

case "$1" in
    configure)
        # loading debconf
        . /usr/share/debconf/confmodule

        # try to get host from jitsi-videobridge
        db_get jitsi-videobridge/jvb-hostname
        if [ -z "$RET" ] ; then
            # server hostname
            db_set jitsi-videobridge/jvb-hostname "localhost"
            db_input critical jitsi-videobridge/jvb-hostname || true
            db_go
        fi
        JVB_HOSTNAME="$RET"

        TURN_CONFIG="/etc/turnserver.conf"
        NGINX_CONFIG="/etc/nginx/sites-available/$JVB_HOSTNAME.conf"
        JITSI_MEET_CONFIG="/etc/jitsi/meet/$JVB_HOSTNAME-config.js"

        NGINX_SITES_ENABLED="/etc/nginx/sites-enabled/"
        NGINX_CONFIG_ENABLED="${NGINX_SITES_ENABLED}${JVB_HOSTNAME}.conf"
        NGINX_MULTIPLEXING="true"
        for site in ${NGINX_SITES_ENABLED}*; do
            # if it is not a file continue
            [ -f "${site}" ] || continue
            # if it is our config skip
            [ "${site}" != "${NGINX_CONFIG_ENABLED}" ] || continue
            # check whether other enabled hosts has listen 443
            if cat ${site} | grep -v "^[[:space:]]*#" | grep listen | grep -q "^.*[[:space:]:]443[;[:space:]].*" ; then
                # nothing to do
                echo "------------------------------------------------"
                echo ""
                echo "turnserver is listening on tcp 5349 as other nginx sites use port 443"
                echo ""
                echo "------------------------------------------------"
                NGINX_MULTIPLEXING="false"
            fi
        done

        # if there was a turn config backup it so we can configure
        # we cannot recognize at the moment is this a user config or default config when installing coturn
        if [[ -f $TURN_CONFIG ]] && ! grep -q "jitsi-meet coturn config" "$TURN_CONFIG" ; then
            mv $TURN_CONFIG $TURN_CONFIG.bak
        fi

        # detect dpkg-reconfigure, just delete old links
        db_get jitsi-meet-turnserver/jvb-hostname
        JVB_HOSTNAME_OLD=$RET
        if [ -n "$RET" ] && [ ! "$JVB_HOSTNAME_OLD" = "$JVB_HOSTNAME" ] ; then
            if [[ -f $TURN_CONFIG ]] && grep -q "jitsi-meet coturn config" "$TURN_CONFIG" ; then
                rm -f $TURN_CONFIG
            fi
        fi

        # this detect only old installations with no nginx
        db_get jitsi-meet/jvb-serve || true
        if [ ! -f $NGINX_CONFIG -o "$RET" = "true" ] ; then
            # nothing to do
            echo "------------------------------------------------"
            echo ""
            echo "turnserver not configured"
            echo ""
            echo "------------------------------------------------"
            db_stop
            exit 0
        fi

        if [[ -f $TURN_CONFIG ]] ; then
            echo "------------------------------------------------"
            echo ""
            echo "turnserver is already configured on this machine."
            echo ""
            echo "------------------------------------------------"

            if grep -q "jitsi-meet coturn config" "$TURN_CONFIG" && ! grep -q "jitsi-meet coturn relay disable config" "$TURN_CONFIG" ; then
                echo "Updating coturn config"
                echo "# jitsi-meet coturn relay disable config. Do not modify this line
no-multicast-peers
no-cli
no-loopback-peers
no-tcp-relay
denied-peer-ip=0.0.0.0-0.255.255.255
denied-peer-ip=10.0.0.0-10.255.255.255
denied-peer-ip=100.64.0.0-100.127.255.255
denied-peer-ip=127.0.0.0-127.255.255.255
denied-peer-ip=169.254.0.0-169.254.255.255
denied-peer-ip=127.0.0.0-127.255.255.255
denied-peer-ip=172.16.0.0-172.31.255.255
denied-peer-ip=192.0.0.0-192.0.0.255
denied-peer-ip=192.0.2.0-192.0.2.255
denied-peer-ip=192.88.99.0-192.88.99.255
denied-peer-ip=192.168.0.0-192.168.255.255
denied-peer-ip=198.18.0.0-198.19.255.255
denied-peer-ip=198.51.100.0-198.51.100.255
denied-peer-ip=203.0.113.0-203.0.113.255
denied-peer-ip=240.0.0.0-255.255.255.255" >> $TURN_CONFIG

                invoke-rc.d coturn restart || true
            fi

            db_stop
            exit 0
        fi

        # stores the hostname so we will reuse it later, like in purge
        db_set jitsi-meet-turnserver/jvb-hostname "$JVB_HOSTNAME"

        # try to get turnserver password
        db_get jitsi-meet-prosody/turn-secret
        if [ -z "$RET" ] ; then
            db_input critical jitsi-meet-prosody/turn-secret || true
            db_go
        fi
        TURN_SECRET="$RET"

        # no turn config exists, lt's copy template and fill it in
        PUBLIC_IP=$(dig -4 +short myip.opendns.com a @resolver1.opendns.com) || true
        if [ -z "$PUBLIC_IP" ] ; then
            PUBLIC_IP="127.0.0.1"
            echo "------------------------------------------------"
            echo "Warning! Could not resolve your external ip address! Error:^"
            echo "Your turn server will not work till you edit your $TURN_CONFIG config file."
            echo "You need to set your external ip address in external-ip and restart coturn service."
            echo "------------------------------------------------"
        fi
        cp /usr/share/jitsi-meet-turnserver/turnserver.conf $TURN_CONFIG
        sed -i "s/jitsi-meet.example.com/$JVB_HOSTNAME/g" $TURN_CONFIG
        sed -i "s/__turnSecret__/$TURN_SECRET/g" $TURN_CONFIG
        sed -i "s/__external_ip_address__/$PUBLIC_IP/g" $TURN_CONFIG

        # SSL for nginx
        db_get jitsi-meet/cert-choice
        CERT_CHOICE="$RET"

        if [ "$CERT_CHOICE" = "I want to use my own certificate" ] ; then
            db_get jitsi-meet/cert-path-key
            CERT_KEY="$RET"
            db_get jitsi-meet/cert-path-crt
            CERT_CRT="$RET"

            # replace self-signed certificate paths with user provided ones
            CERT_KEY_ESC=$(echo $CERT_KEY | sed 's/\./\\\./g')
            CERT_KEY_ESC=$(echo $CERT_KEY_ESC | sed 's/\//\\\//g')
            sed -i "s/pkey=\/etc\/jitsi\/meet\/.*key/pkey=$CERT_KEY_ESC/g" $TURN_CONFIG
            CERT_CRT_ESC=$(echo $CERT_CRT | sed 's/\./\\\./g')
            CERT_CRT_ESC=$(echo $CERT_CRT_ESC | sed 's/\//\\\//g')
            sed -i "s/cert=\/etc\/jitsi\/meet\/.*crt/cert=$CERT_CRT_ESC/g" $TURN_CONFIG
        fi

        sed -i "s/#TURNSERVER_ENABLED/TURNSERVER_ENABLED/g" /etc/default/coturn
        invoke-rc.d coturn restart || true

        NGINX_STREAM_CONFIG="/etc/nginx/modules-enabled/60-jitsi-meet.conf"
        if [ $NGINX_MULTIPLEXING = "true" ] && [ ! -f $NGINX_STREAM_CONFIG ] && [ -f $NGINX_CONFIG ] ; then
            ln -s /usr/share/jitsi-meet-turnserver/jitsi-meet.conf $NGINX_STREAM_CONFIG
            sed -i "s/listen 443 ssl/listen 4444 ssl http2/g" $NGINX_CONFIG
            sed -i "s/listen \[\:\:\]\:443 ssl/listen \[\:\:\]\:4444 ssl http2/g" $NGINX_CONFIG
            invoke-rc.d nginx reload || true
        else
            PROSODY_HOST_CONFIG="/etc/prosody/conf.avail/$JVB_HOSTNAME.cfg.lua"
            if [ -f $PROSODY_HOST_CONFIG ] ; then
                # If we are not multiplexing we need to change the port in prosody config
                sed -i 's/"443"/"5349"/g' $PROSODY_HOST_CONFIG
                invoke-rc.d prosody restart || true
            fi
        fi

        # Enable turn server in config.js
        if [ -f $JITSI_MEET_CONFIG ] ; then
            sed -i "s/\/\/ useStunTurn: true/useStunTurn: true/g" $JITSI_MEET_CONFIG
        fi

        # and we're done with debconf
        db_stop
    ;;

    abort-upgrade|abort-remove|abort-deconfigure)
    ;;

    *)
        echo "postinst called with unknown argument \`$1'" >&2
        exit 1
    ;;
esac

# dh_installdeb will replace this with shell code automatically
# generated by other debhelper scripts.

#DEBHELPER#

exit 0