Simplify parts of the logic introduced in
11b7144ad0.
Specificaly, using all the state change avoiding functions doesn't give us much
since we need to copy the state for sure.
Makes sure that whenever a conference is left or switched, the local
participant's id will be equal to the default value.
The problem fixed by this commit is a situation where the local
participant may end up sharing the same ID with it's "ghost" when
rejoining a disconnected conference. The most important and easiest to
hit case is when the conference is left after the CONFERENCE_FAILED
event.
Another rare and harder to encounter in the real world issue is
where CONFERENCE_LEFT may come with the delay due to it's asynchronous
nature. The step by step scenario is as follows: trying to leave a
conference, but the network is not doing well, so it takes time,
requests are timing out. After getting back to the welcome page the
the CONFERENCE_LEFT has not arrived yet. The same conference is joined
again and the load config may timeout, but it will be read from the
cache. Now the network gets better and conference is joining which
results in our ghost participant added to the redux state. At this point
there's the root issue: two participants with the same id, because the
local one was neither cleared nor set to the new one yet
(PARTICIPANT_JOINED come, before CONFERENCE_JOINED where we adjust the
id). Then comes CONFERENCE_JOINED and we try to update our local id.
We're updating the ID of both ghost and local participant. It could be
also that the delayed CONFERENCE_LEFT comes for the old conference, but
it's too late and it would update the id for both participants.
The approach here reasons that the ID of the local participant
may be reset as soon as the local participant and, respectively, her ID
is no longer involved in a recoverable JitsiConference of interest to
the user and, consequently, the app.
Co-authored-by: Pawel Domas <pawel.domas@jitsi.org>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
Pawel Domas said:
The conference state field is referring to the current conference in
progress, so it feels like this field should be cleared as soon as we
declare that the conference is being left and the asynchronous process
of leaving the conference starts (which happens on
CONFERENCE_WILL_LEAVE).
Lyubo Marinov said:
Merely setting conference to undefined is incomplete because there are
other redux state properties associated with conference.
What we're doing here is redefining the redux action
CONFERENCE_WILL_LEAVE:
The redux action CONFERENCE_WILL_LEAVE represents the order of the user
to leave a JitsiConference instance. From the user's perspective, there's
no going back (with respect to the instance itself). The app will perform
due clean-up like leaving the associated room, but the instance is no
longer the focus of the attention of the user and, consequently, the app.
Now CONFERENCE_LEFT and CONFERENCE_WILL_LEAVE have more in common than
before and we can do a much better job by expressing the common parts in
source code. Additionally, our source code can be rewritten to better
express the meaning of any of these two actions.
Co-authored-by: Pawel Domas <pawel.domas@jitsi.org>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
The commit message of "Associate remote participant w/ JitsiConference
(_JOINED)" explains the motivation for this commit.
Practically, _JOINED and _LEFT combined with "Remove remote participants
who are no longer of interest" should alleviate the problem with
multiplying remote participants to an acceptable level of annoyance.
Technically though, a remote participant cannot be identified by an ID
only. The ID is (somewhat) "unique" in the context of a single
JitsiConference instance. So in order to not have to scratch our heads
over an obscure corner, racing case, it's better to always identify
remote participants by the pair id-conference. Unfortunately, that's a
bit of a high order given the existing source code. So I've implemented
the cases which are the easiest so that new source code written with
participantUpdated is more likely to identify a remote participant with
the pair id-conference.
Additionally, the commit "Reduce direct read access to the
features/base/participants redux state" brings more control back to the
functions of the feature base/participants so that one day we can (if we
choose to) do something like, for example:
If getParticipants is called with a conference, it returns the
participants from features/base/participants who are associated with the
specified conference. If no conference is specified in the function
call, then default to the conference which is the primary focus of the
app at the time of the function call. Added to the above, this should
allow us to further reduce the cases in which we're identifying remote
participants by id only and get us even closer to a more "predictable"
behavior in corner, racing cases.
The plan set in motion here is to associate remote participants with the
JitsiConference instances that created them in order to be able to
remove remote participants when a JitsiConference is no longer the
primary focus of the jitsi-meet app. And that's supposed to alleviate a
problem with multiplying remote thumbnails.
Doing all of the above in a single commit is a bit of a high order. So
I'm splitting the whole into multiple successive commits for the
purposes of observability, comprehension. Each commit is supposed to be
safe even if subsequent commits are not accepted, are reverted,
whatever. Obviously, without the successive commits, a commit may be
"unused".
One of the important pieces of the multiplying remote thumbnails "fix"
offered is removing remote participants who are no longer of interest
i.e. PARTICIPANT_LEFT. But in order for _LEFT to be implemented, _JOINED
must be implemented first.
Because a conference can fail before or after it's joined it must be
"left" in order to release any allocated resources like peerconnections,
tracks and all the other things.
Zoltan Bettenbuk suggested the following:
const state = getState();
if (desiredTypes.length === 0) {
- const { audio, video } = state['features/base/media'];
-
- audio.muted || desiredTypes.push(MEDIA_TYPE.AUDIO);
- video.muted || desiredTypes.push(MEDIA_TYPE.VIDEO);
+ const startAudioOnly = getPropertyValue(state, 'startAudioOnly');
+ const startWithAudioMuted
+ = getPropertyValue(state, 'startWithAudioMuted');
+ const startWithVideoMuted
+ = getPropertyValue(state, 'startWithVideoMuted');
+
+ if (!startWithAudioMuted) {
+ desiredTypes.push(MEDIA_TYPE.AUDIO);
+ }
+ if (!startAudioOnly && !startWithVideoMuted) {
+ desiredTypes.push(MEDIA_TYPE.VIDEO);
+ }
}
const availableTypes
The final commit is really a different implementation of the same idea
but takes into account that the state of base/media already contains the
intent of the URL and notices the delay in the realization of the
background app state.
Additionally, unbreaks one more case where setAudioOnly is incorrectly
dispatched on CONFERENCE_LEFT or CONFERENCE_FAILED and, consequently,
overrides the intent of the URL.
Being kicked out of the conference will result with a conference failed
event with 'conference.kicked' reason and take the user back to
the welcome page by navigating to 'undefined'.
This reverts commit 88325aeef2.
Turns out a conference with a password triggers a failed conference
join. It's going to be tricky to decipher when to do actual
cleanup, and where to shove that code, so reverting is easier for
now.
Destroy local tracks and also destroy large video so the
user does not wonder why camera (and mic) are still enabled
even though hangup has been pressed.
* ref: Restructures the pinned/unpinned events.
* ref: Refactors the "audio only disabled" event.
* ref: Refactors the "stream switch delay" event.
* ref: Refactors the "select participant failed" event.
* ref: Refactors the "initially muted" events.
* ref: Refactors the screen sharing started/stopped events.
* ref: Restructures the "device list changed" events.
* ref: Restructures the "shared video" events.
* ref: Restructures the "start muted" events.
* ref: Restructures the "start audio only" event.
* ref: Restructures the "sync track state" event.
* ref: Restructures the "callkit" events.
* ref: Restructures the "replace track".
* ref: Restructures keyboard shortcuts events.
* ref: Restructures most of the toolbar events.
* ref: Refactors the API events.
* ref: Restructures the video quality, profile button and invite dialog events.
* ref: Refactors the "device changed" events.
* ref: Refactors the page reload event.
* ref: Removes an unused function.
* ref: Removes a method which is needlessly exposed under a different name.
* ref: Refactors the events from the remote video menu.
* ref: Refactors the events from the profile pane.
* ref: Restructures the recording-related events.
Removes events fired when recording with something other than jibri
(which isn't currently supported anyway).
* ref: Cleans up AnalyticsEvents.js.
* ref: Removes an unused function and adds documentation.
* feat: Adds events for all API calls.
* fix: Addresses feedback.
* fix: Brings back mistakenly removed code.
* fix: Simplifies code and fixes a bug in toggleFilmstrip
when the 'visible' parameter is defined.
* feat: Removes the resolution change application log.
* ref: Uses consistent naming for events' attributes.
Uses "_" as a separator instead of camel case or ".".
* ref: Don't add the user agent and conference name
as permanent properties. The library does this on its own now.
* ref: Adapts the GA handler to changes in lib-jitsi-meet.
* ref: Removes unused fields from the analytics handler initializaiton.
* ref: Renames the google analytics file and add docs.
* fix: Fixes the push-to-talk events and logs.
* npm: Updates lib-jitsi-meet to 515374c8d383cb17df8ed76427e6f0fb5ea6ff1e.
* fix: Fixes a recently introduced bug in the google analytics handler.
* ref: Uses "value" instead of "delay" since this is friendlier to GA.
The goal is to reduce usage on atlassian/aui. New components
have been created to display the settings panel. Language
selection will reach into i18n for state whereas moderator
options will keep state in redux.
Properly handle errors while connecting or joining a conference. Prior to this
patch, only errors on established conferences / connections were saved to the
redux store.
* Adds initial documentation for sipgw jibri.
Also explains enabling the people search service and the request/response that are made around sipgw jibri service.
* Fixes add people dialog to invite users and rooms.
No invitation is sent when there is nobody to invite.
* Reuse some recording strings, by using arguments.
* Make sure web also dispatches CONFERENCE_WILL_JOIN.
* Introduces new feature videosipgw.
* Fixes lint errors.
* Renames methods to use people, chatRooms and videoRooms.
* Updates to latest lib-jitsi-meet (dc3397b18b).
While reviewing "[PREVIEW|RN]: Handle getUserMedia in progress" I
discovered JSDoc comments which could be improved. They are not
necessarily 100% related to the PR.
This commit adds extra actions/Redux state to be able to deal with
the GUM operation being in progress. There will be early local track
stub in the Redux state for any a local track for which GUM has been
called, but not completed yet.
Local track is considered valid only after TRACK_ADDED event when it
will have JitsiLocalTrack instance set.
The lib will accept new style constraints and use those
to capture audio/video. By defining the constraints in
config, there is greater flexibility for defining
and changing constraints.
Triggering the 'conference left' action when the wait for owner dialog
is dismissed will let the Call Kit implementation end the call, after
a recoverable conference failed event was emitted.
Also fixes conference state reduction when 'conference left' is emitted
by room lock or auth features where the conference has not been joined
yet.
Will override email, display name and avatar URL with the values
provided in 'context.user' structure of the JWT token.
Settings will no longer be used to retrieve local display name,
email and avatar URL. Now those values will be obtained from
the /features/base/participants Redux state.
fix(jwt/middleware): use const for default name
fix: wrong default display name on web
ref(base/participants): remove getDisplayName functions
ref(jwt): do not accept unknown user fields
* WiP(invite-ui): Initial move of invite UI to invite button
* Adjusts styling to fit both horizontal and vertical filmstrip
* Removes comment and functions not needed
* [squash] Addressing various review comments
* [squash] Move invite options to a separate config
* [squash] Adjust invite button styles until we fix the whole UI theme
* [squash] Fix the remote videos scroll
* [squash]:Do not show popup menu when 1 option is available
* [squash]: Disable the invite button in filmstrip mode
* feat(connection-indicator): implement automatic hiding on good connection (#2009)
* ref(connection-stats): use PropTypes package
* feat(connection-stats): display a summary of the connection quality
* feat(connection-indicator): show empty bars for interrupted connection
* feat(connection-indicator): change background color based on status
* feat(connection-indicator): implement automatic hiding on good connection
* fix(connection-indicator): explicitly set font size
Currently non-react code will set an icon size on ConnectionIndicator.
This doesn't work on initial call join in vertical filmstrip after
some changes to support hiding the indicator. The chosen fix is
passing in the icon size to mirror what would happe with full
filmstrip reactification.
* ref(connection-stats): rename statuses
* feat(connection-indicator): make hiding behavior configurable
The original implementation made the auto hiding of the indicator
configured in interfaceConfig.
* fix(connection-indicator): readd class expected by torture tests
* fix(connection-indicator): change connection quality display styling
Bold the connection summary in the stats popover so it stands out.
Change the summaries so there are only three--strong, nonoptimal,
poor.
* fix(connection-indicator): gray background on lost connection
* feat(icons): add new gsm bars icon
* feat(connection-indicator): use new 3-bar icon
* ref(icons): remove icon-connection and icon-connection-lost
Both have been replaced by icon-gsm-bars so they are not
being referenced anymore. Mobile looks to have connect-lost
as a separate icon in font-icons/jitsi.json.
* fix(defaultToolbarButtons): Fixes unresolved InfoDialogButton component problem
* [squash]: Makes invite button fit the container
* [squash]:Addressing invite truncate, remote menu position and comment
* [squash]:Fix z-index in horizontal mode, z-index in lonely call
* [squash]: Fix filmstripOnly property, remove important from css
paweldomas
Saúl Ibarra Corretgé
Lyubo Marinov
zbettenbuk
Leonard Kim
bgrozev
damencho
hristoterezov
yanas