The counterpart of the external API in the Jitsi Meet Web app uses the
search URL param jwt to heuristically detect that the Web app is very
likely embedded (as an iframe) and, consequently, needs to forcefully
enable itself. It was looking at whether there was a JSON Web Token
(JWT) but that logic got broken when the JWT support was rewritten
because the check started happening before the search URL param jwt was
parsed.
We've had Filmstrip & LargeVideo React Components on mobile/React Native
from the start. We didn't have them on Web (because the rewrite in React
is not complete yet). However, that led to differences in the React
Component Conference on Web and mobile. In an effort to get closer to
merging the React Component Conference on Web and mobile, introduce the
React Components Filmstrip & LargeVideo on Web even if a minimal
render-only form at this time.
* fix(vertical-filmstrip): different label animations for filmstrip states
Instead of one timing for sliding the video status label left and right,
have different timings depending on the filmstrip state. To facilitate
triggering the different animations, add more classes to the labels
that need to move that specify the filmstrip state.
- Faster transition if focusing on self-view with videos present so
the label does not overlap videos transitioning from 0 opacity.
- Transition delay when de-focusing on self-view with videos present
so videos have time to go away before the label moves over them.
- Maintain no movement if there are no videos, regardless of
filmstrip toggle state.
- Different delays for when the filmstrip is being toggled visible
and hidden if there are remote videos visible.
* SQUASH: remove remote videos count
* SQUASH: add docs to scss
The video status labels, which include recording and hd status,
have been moved back to the top left while in vertical filmstrip
mode. The following had to be done:
- Remove styling to move the labels to the bottom left
- For VideoStatusLabel, move filmstrip remote video count, toggle
state, and 1:1 state into redux.
- Use middleware to emit out to the Recording label when the
filmstrip changes.
- Create an empty Filmstrip file for web and identify the existing
Filmstrip component as native.
The 1:1 call UI and vertical filmstrip act on remote videos
while leaving local video alone. To facilitate acting only on
remote videos, place remote videos into their own container element.
Audio only mode will be toggleable only from the VideoStatusLabel,
so remove AudioOnlyButton from the toolbar and delete the component
itself. As a result of the button being removed, a truthy check in
VideoStatusLabel was also removed to ensure it will display as it
is now the only way to toggle audio only mode. Also set the cursor
on VideoStatusLabel to always be default, so it can never show the
text cursor.
Add a menu that displays when hovering over VideoStatusLabel. The menu's
display is controlled by CSS. As the existing AudioOnlyLabel no longer needs
needs its own tooltip, it has been removed and label display logic has been
moved into VideoStatusLabel.
DialInNumbersForm has been modified to display a conference id to be used for
dialing into the conference. The changes include:
- Requesting the conference id and adding the conference id to the redux store
- Displaying the conference id in DialInNumbersForm
- Modifying the copy behavior to support copying the new message to clipboard
- DialInNumbersForm does not display until all ajax requests have completed
successfully. This eliminates the need for the REQUESTING state.
In its current implementation, the VideoStatusLabel shows HD based on peer
connection stats. These stats will be available on temasys browsers soon but
will remain unavailable on Firefox, which does not collect height/width stats.
To support VideoStatusLabel showing cross-browser, move the high-definition
detection out of stat sniffing and instead check the video element itself using
an interval in LargeVideoManager. (An interval was used because the temasys
video object does not support the onresize event.) Also, add a cleanup path from
conference.web to LargeVideoManager to remove the interval.
There were getDomain, setDomain, SET_DOMAIN, setRoomURL, SET_ROOM_URL
which together were repeating one and the same information and in the
case of the 'room URL' abstraction was not 100% accurate because it
would exist even when there was no room. Replace them all with a
'location URL' abstraction which exists with or without a room.
Then the 'room URL' abstraction was not used in (mobile) feature
share-room. Use the 'location URL' there now.
Finally, removes source code duplication in supporting the Web
application context root.
Device selection has live previews that reuse the current local
audio and video tracks for the sake of internet explorer. This
means when the local video was muted, device selection would
show a muted message. It is preferred to show a live preview
even when muted.
The changes include:
- Passing device ids into DeviceSelectionDialog, not tracks.
- Setting default selected devices to use for live previews.
- Removing all checks in DeviceSelectionDialog involving local tracks.
- Catching and displaying errors when creating a live video preview.
Move the HD label into the newly renamed VideoStatusLabel
component. That way it cannot be possible for the audio only
label and the HD label to display simultaneously.
Audio only mode can be used to save bandwidth. In this mode local video is muted
and last N is set to 0, thus disabling all remote video.
When this mode is enabled avatars are shown.
* fix(react/participant): store display name in redux
* feat(remotecontrol): Add option to display the authorization dialog in meet
* feat(remotecontrol): Enable ESLint and Flow
toolbox/functions has functions that are specific only to web,
specifically defaultToolbarButtons. This has caused the native
build to attempt to bring in a web dependency which leads to a
build error. The fix for now is splitting web functions from
native functions to resolve the build error.
Create a new React Component for displaying a list of dial-in
numbers. The Component will fetch the numbers from a new
numberRetreviewUrl key/value set in config. If not present in
config, the Component will not be displayed.
AtlasKit DropdownMenu cannot be disabled, unlike Single Select.
The result is the isDisabled prop was not being honored. The
workaround is returning only the trigger element for the dropdown
and styling it to look like the dropdown is disabled. The text
for disabled device selection was changed along the way to fit
into the trigger.
Watermarks can be used to link to an external site by configuring a URL.
However, the URL is optional. When it is not set, the watermark should
not be clickable. This prevents users from reloading the room by
clicking on a watermark (caused by an HTML anchor element without an
href).
The functionality around logging including logging_config.js i.e.
loggingConfig and the other classes and/or functions that initialize
loggers for Jits Meet truly deserves a feature of its own. Start getting
in that direction on both Web and mobile by introducing
features/base/logging and bringing loggingConfig to mobile.
The config object defined by lib-jitsi-meet is not used by
lib-jitsi-meet only, jitsi-meet respects its values as well.
Moreover, jitsi-meet defined classes and/or functions which manipulate
that config object. Consequently, it makes sense to move the config
object and the associated classes and functions in a dedicated feature.
AtlasKit Dropdown was recently updated to support fitting the
width of its container. However, AtlasKit Button, the trigger
element currently used for the dropdowns, does not fit the width
of AtlasKit Dropdown and stll has text overflowing out of its
button when there is an iconBefore prop passed in. Instead of
using AtlasKit Button, use a div and mimic the button look. This
allows the "button" to fit the container width and can display
ellipsized text within itself.
@virtuacoplenny, the changes of this commit are not necessarily in
source code that you introduced in
https://github.com/jitsi/jitsi-meet/pull/1499 but I saw violations in
files modified in the PR which I had to read in order to understand the
PR.
Converting the invite modal includes the following:
- Creating new react components to display InviteDialog. The
main parent components are ShareLink and PasswordOverview,
the later handles displaying lock state and password editing.
These components do not make use of atlaskit as the component
for input does not yet support readonly, so for consistency
within the modal content no atlaskit was used.
- Using redux for keeping and accessing lock state instead of
RoomLocker.
- Publicly exposing the redux action lockStateChanged for direct
calling on lock events experienced on the web client.
- Removing Invite, InviteDialogView, and RoomLocker and references
to them.
- Handling errors that occur when setting a password to preserve
existing web funtionality.
When a dialog is opened on Android, full-screen mode is exited but we (the app)
know nothing about this. Make sure we re-enter full-screen mode once a dialog is
closed, if the conditions to be in such mode are still met.
Instead of using AtlasKit Single-Select, use Dropdown. Dropdown
differs in that an icon can be specified for the trigger element,
whereas Single-Select currently supports icons for all elements,
and Dropdown can show all options incuding the already-selected
option.
This change does introduce the issue of the trigger element not
taking up 100% width of the parent. Supporting such would involve
overriding AtlasKit CSS. The compromise made here was to do a
generic override of max-width so the trigger elements at least
stay within the parent and aligning the trigger elements to the
right.
Some atlaskit components, such as field-text, inherit text color.
This is a problem with components that are white as they will
inherit $defaultColor, which is a light gray. So instead, for
the atlaskit modal, set a color for all the form content so it
can be inherited instead.
Dialog does not currently support displaying dynamic strings
for titles, only static strings listed for translation. Accept
a new prop that explicitly states it is for setting the title
and have the web dialog prefer it over the titleKey.
When the prosody setting has muc_allowners, everyone joins as a
moderator. In this case, the local user will not be set as a
moderator in the redux store as the USER_ROLE_CHANGE event will
trigger with the local user id before the redux store has set
the actual local user id--something that happens on
CONFERENCE_JOINED. The fix is to explicitly signal the local user
role has changed to the redux store, which follows the
implementation of pre-existing web logic.
Device Selection re-uses the local video track for its preview.
When displaying Device Selection while video muted, the text
"muted" displays within the video preview, but some translations
may mistake this to mean audio muted. The text has been changed
to be explicit about video mute. This is a temporary solution;
at some point Device Selection should not re-use the local track
except for IE, the one browser that cannot get multiple tracks
from the same video input.
Over time features/base/util became a bucket where people seemed to dump
just about anything they couldn't think of a better place for. That's a
trend I don't like encouraging. Given that roomnameGenerator.js is
currently used in features/welcome only, I'm fine with moving it there
for the greater good.
Because timeUtil.js computes hours, minutes, and seconds out of a single
time/duration using three separate functions, I wouldn't recommend using
it, especially reusing it. That's why I'm even making the functions
private to their current use location.
I don't like the file/function name, I'm not excited about the
complexity of the logic it implements, and it's definitely a reusable
piece worthy of being called a utility.
Move logic to open device selection outside of SettingsMenu so
it can be called independently by either SettingsMenu or by
the settings button itself if no other settings but devices will
be displayed.
Saúl Ibarra Corretgé reported that Recording shows an error dialog
stating "There was an error connecting to your camera". Hristo Terezov
and Yana Stamcheva traced that the problem originates in
da4425b5c0
and, more specifically, is caused by a different order of execution due
to the move of the invocation of the function Recording.init.
The solution is to bring back the execution location of Recording.init.
Atlaskit at times will have localized styling for font-size and
sometimes will not. The button component will inherit its
font-size whereas selectors have localized font-size of 14px. For
consistency, the cancel/submit buttons on the atlaskit modals
will also have 14px. The atlaskit story book examples also use
buttons with 14px font-size.
For images < 80 of size forder radius doesn't work properly (it looks like a
square with rounded corders), however, using a duble sized radius does the
trick. Go figure.
The Device Selection modal consists of:
- DeviceSelection, an overly smart component responsible for
triggering stream creation and cleanup.
- DeviceSelector for selector elements.
- VideoInputPreview for displaying a video preview.
- AudioInputPreview for displaying a volume meter.
- AudioOutputPreview for a test sound output link.
Store changes include is primarily storing the list of
available devices in redux. Other app state has been left
alone for future refactoring.
We seemed to be using the names "film strip" and "filmstrip" (and,
consequently, their source code-conscious forms such as film-strip,
FilmStrip, etc.) In order to comply with our coding style which requires
a consistent one name for a given abstraction, choose one name and
rename the uses of the other name.
Wikipedia has a definition of a "filmstrip", I couldn't find a "film
strip". I guess our abstraction can be seen as what's described there.
When I google "film strip", I get results about "filmstrip" at the top.
That's why I chose "filmstrip".
Certain uses of "film strip" such as interfaceConfig.filmStripOnly and
in the external API I left untouched in an attempt to preserve
compatibility.
I wasn't sure whether CSS was tangled in compatibility so I made a
choice and renamed there was well.
When a conference is to happen in a domain which is not the defaut, its config
is loaded and set. As part of this process, lib-jitsi-meet is disposed. Because
disposing is asynchronous, events happen in this sequence:
- set new config
- dispose lib (which effectively wipes the config)
- init lib
This results in the library to be initialized without the loaded config, which
was lost. This commit fixes that by delaying setting the config and
re-initializing the library until it was disposed.
The functionality to use the react-native-webrtc custom API for fast switching
cameras was moved to JitsiLocalTrack in lib-jitsi-meet. Use that.
Ref: https://github.com/jitsi/lib-jitsi-meet/pull/444
The behavior can be triggered with the toggleAudioOnly action, which is
currently fired with a button.
The following aspects of the conference will change when in audio only mode:
- local video is muted
- last N is set to 0 (effectively muting remote video)
- full-screen mode is exited
- audio mode is set to "audio chat" (default output is the earpiece)
- the wake lock is disengaged
One aspect not handled in this patch is disabling the video mute button while in
audio only mode. The user should not be able to turn back video on in that case.
They better represent if a participant has video available or not. There are
cases when even a participant in the last N set would not have video because it
disconnected momentarily, for example.
Use the curstom _switchCamera API provided by react-native-webrtc to toggle the
camera instead of destroying the current track and creating a new one.
_switchCamera is implemented at a low level, so the track perceives no changes,
thus being a lot faster and less involved since the capturer doesn't need to be
destroyed and re-created.
In addition, don't mirror the video for the back camera.
Ref: https://github.com/oney/react-native-webrtc/pull/235
When a new local video track is created an associated video capturer is created
for it. The cause for the freezes seems to be creating mutliple tracks (which
come with a video capturer each). Fix this by first disposing of the previous
video track before creating the new one.
Ref:
https://github.com/oney/react-native-webrtc/issues/209#issuecomment-281482869
Lib-jitsi-meet does not really implement isScreenSharing. Besides,
getCameraFacingMode will already make sure that the video track does not
represent a desktop stream.
It got broken while rewriting the Web toolbar in React Toolbox. There is
a problem with the toolbars and how we construct the intialState of the
buttons. The _getInitialState() in the toolbox reducer gets the list of
buttons from interfaceConfig, but in fact interfaceConfig is meant to be
overriden in several very important cases. One of the cases being the
external API, which we use in several projects in production.
JSDoc comments didn't follow the ESLint rule for properly formatted
sentences.
BTW, I'm not blind to the fact that PasswordRequiredPrompt and
RoomLockPrompt participated in a birthing of source code through
copy+paste. (If we do not copy+paste, we will not have to fix one and
the same source code such as comments multiple times.)
https://github.com/jitsi/jitsi-meet/pull/1397 (React Toolbar) is huge at
the time of this writing. In order to reduce it, I'm extracting changes
not directly related to React-ifying the Toolbar such as added jsdocs
and source code formatting.
This is in preparation for an upcoming "audio only mode" feature. Setting last N
will also be required for it, so this patch factors out the action and makes it
public so other modules can reuse it.
In addition, if the value is set to undefined the configured default value (or
-1 if absent) is picked.
Replaces changeAvatarID, changeAvatarURL and changeEmail with
participantUpdated action.
participantUpdated can be fired for local user without id. This
fixes the problem with updating the local user before the user
join the conference which results in fix for failing to execute
commands for avatarID, avatarURL and email right after the iframe
api creates the iframe with Jitsi Meet.
In this case makes more sense to have overlay frame included in every overlay instead
of abstract class that implements the overlay frame and have to be extended by every
overlay. In addition, mapStateToProps isn't working well with inheritance.
The error raised by JitsiMeetJS.init() is already in the state of
features/base/lib-jitsi-meet so it's not a good design to store the same
error in the state of features/unsupported-browser.
Fixes an issue where immersive mode would be enabled when coming back from the
background on the welcome screen.
Re-fixes c57e713, which was not correct.
On RN we don't use the global APP object, so don't save the store there unless
it's defined, which is the case in the current web version. Also, check for
undefined explicitly, since a "if (!APP)" check will throw a ReferenceError.
The mobile app remembers the domain which hosted the last conference. If
the user specified a full URL first and specified a room name only the
second time, it was not obvious that the second conference would be
hosted on the domain of the first conference.
Looks like Android gets confused as to what surface to blit when we hide or
show toolbars. Setting a border on the container, seems to force the entire
area to blit properly.
Other attempted approaches, with no success:
- zIndex of -100
- width and height of 0
- opacity of 0 and setting 'disabled' on touch containers
This patch applies the workaround in the welcome page and conference containers.
Lib-jitsi-meet uses jQuery's .append method to manipulate Jingle. The
method in question invokes the getter and setter of Element.innerHTML.
Unfortunately, xmldom which we use in React Native to polyfill DOM does
not polyfill Element.innerHTML. So polyfill it ourselves.
Turns out React Native's timers (setTimeout / setInterval) don't run while the
app is in the background: https://github.com/facebook/react-native/issues/167
This patch replaces the global timer functions with those from the
react-native-background-timer package, which work in the background.
These timers won't magically make an application work in the background, but
they will run if an application already happens to run in the background. That's
our case while in a conference, so these timers will run, allowing XMPP pings to
be sent and the conference to stay up as long as the user desires.
- Use 1 name for 1 abstraction. Instead of useFullScreen and enabled use
fullScreen.
- Comments are correct English sentences so no double spaces between
senteces, no capitalization of the work On midsentence.
- Write as little source code as possible if readability is preserved.
- Utilize Facebook's Flow.
- The name of a private function must start with _ and the jsdoc should
state that the function is private.
The implementation varies across platforms, with the same goal: allow the app to
use the entire screen real state while in a conference.
On Android we use immersive mode, which will hide the status and navigation bars.
https://developer.android.com/training/system-ui/immersive.html
On iOS the status bar is hidden, with a slide effect.
Lyubo Marinov
yanas
Saúl Ibarra Corretgé
Leonard Kim
Дамян Минков
Ilya Daynatovich
Saúl Ibarra Corretgé
hristoterezov
Guus der Kinderen
paweldomas
Любомир Маринов
Lyubomir Marinov