They never worked on mobile and pose an impediment for makinf config.js more
future proof. Specially if we want to move to a non-executable form of
configuration.
React Native doesn't define __filename nor __dirname so do it artisanally. In
addition, this helps with centralizing the configuration passed to loggers.
When in a conference, try to enter PiP when pressing the back button. If this is
not possible (because it's unsupported, not enabled, etc.) fall back to the
previous behavior of simply hanging up.
This PR changes the logic for connecting / disconnecting conferences. Instead of
doing it in mount / unmount events from the Conference component, it moves the
logic to the appNavigatee action.
This fixes a regression introduced in 774c5ecd when trying to make sure the
conference terminated event is always sent.
By moving the logic to appNavigate we no longer depend on side-effects for
connecting / disconnecting, and the code should be more maintainable moving
forward.
An improvement to this is the concept of sessions, which, while not tackled
here, was taken into consideration.
Dear reader, I'm not proud at all of what you are about to read, but sometimes
life just gives you lemons, so enjoy some lemonade!
Joining a conference implies first creating the XMPP connection and then joining
the MUC. It's very possible the XMPP connection was made but there was no chance
for the conference to be created.
This patch fixes this case by artificially genrating a conference terminated
event in such case. In order to have all the necessary knowledge for this event
to be sent the connection now keeps track of the conference that runs it.
In addition, there is an even more obscure corner case: it's not impossible to
try to disconnect when there is not even a connection. This was fixed by
creating a fake disconnect event. Alas the location URL is lost at this point,
but it's better than nothing I guess.
Provide a default and builtin default implementation which finishes the
Activity, same as before.
What this PR removes is the ability to provide a custom default handler because
applications can already take this decision when calling `onBackPressed`. In
addition, make `onBackPressed` return `void` because it's virtually impossible
for it to return `false` (that would mean that there is no
`ReactInstanceManager`, which means there is no app to begin with).
In addition, remove the use of `BackAndroid` since `BackHandler` contains an iOS
shim now.
- Reset some state on the singletons conference
and VideoLayout.
- Add a way for LocalVideo to clean itself up
by sharing logic with the other SmallVideos.
- Add clearing of chat messages so they don't
linger.
- Remove some UI event listeners.
- Change "features/chat" to support listening for new chat messages
and storing them, removing that logic from conference.js.
- Combine chat.scss and side_toolbar_container.css, and remove unused
scss files. Chat is the only side panel so the two concepts have
been merged.
- Remove direct access to the chat feature from non-react and non-redux
flows.
- Modify the i18n translate function to take in an options object.
By default the option "wait" is set to true, but that causes
components to mount after the parent has been notified of
an update, which means autoscrolling down to the latest rendered
messages does not work. With "wait" set to false, the children
will mount and then the parent will trigger componentDidUpdate.
- Create react components for chat. Chat is the side panel
plus the entiren chat feature. ChatInput is a child of Chat and
is used for composing messages. ChatMessage displays one message
and extends PureComponent to limit re-renders.
- Fix a bug where the toolbar was not showing automatically when
chat is closed and a new message is received.
- Import react-transition-group to time the animation of the
side panel showing/hiding and unmounting the Chat component.
This gets around the issue of having to control autofocus if the
component were always mounted and visibility toggled, but
introduces not being able to store previous scroll state
(without additional work or re-work).
* feat(tile-view): initial implementation for mobile
- Create a tile view component for displaying thumbnails in a
two-dimensional grid.
- Update the existing TileViewButton so it shows a label in the
overflow menu.
- Modify conference so it can display TileView while hiding
Filmstrip.
- Modify Thumbnail so its width/height can be set and to prevent
pinning while in tile view mode.
* use style array for thumbnail styles
* change ternary to math.min for expressiveness
* use dimensiondetector
* pass explicit disableTint prop
* use makeAspectRatioAware instead of aspectRatio prop
* update docs
* fix docs again (fix laziest copy/paste job I've ever done)
* large-video: rename onPress prop to onClick
* change forEach to for...of
* use truthy check fallthrough logic instead of explicit if
* put tile view button second to last in menu
* move spacer to a constant
* the magical incantation to make flow shut up
* feat(tile-view): initial implementation for tile view
- Modify the classname on the app root so layout can adjust
depending on the desired layout mode--vertical filmstrip,
horizontal filmstrip, and tile view.
- Create a button for toggling tile view.
- Add a StateListenerRegistry to automatically update the
selected participant and max receiver frame height on tile
view toggle.
- Rezise thumbnails when switching in and out of tile view.
- Move the local video when switching in and out of tile view.
- Update reactified pieces of thumbnails when switching in and
out of tile view.
- Cap the max receiver video quality in tile view based on tile
size.
- Use CSS to hide UI components that should not display in tile
view.
- Signal follow me changes.
* change local video id for tests
* change approach: leverage more css
* squash: fix some formatting
* squash: prevent pinning, hide pin border in tile view
* squash: change logic for maxReceiverQuality due to sidestepping resizing logic
* squash: fix typo, columns configurable, remove unused constants
* squash: resize with js again
* squash: use yana's math for calculating tile size
* ref(filmstrip): apply filmstrip class to Conference root
Instead of apply the layout class to the body, it can be
applied to Conference. This will allow easier switching
between tile filmstrip and horizontal/vertical filmstrip.
* squash: fix typo filstrip
* Get back the Notice class
* Add Notice component in the Conference web view
* Notice is not exported in index.js. Only used internally by
Conference.
* noticeMessage value obtained from features/base/config
* using mapStateToProps
* value is stored in the internal _message property
* Notice component, orignal in `toolbox` is moved from
`toolbox/components` to `conference/components`
* Notice component only implemented and renderable in web views
* Dummy `conference/components/Notice.naive.js`
This patch is partially based in the removed logic included
originally in:
commit 59a74153dc
(tag: jitsi-meet_1886, tag: jitsi-meet_1885, tag: 1797, tag: 1796)
Author: Ilya Daynatovich <shupuercha@gmail.com>
Date: Mon Mar 20 11:04:54 2017 -0500
Toolbar notice as React Component
In reply to: Saúl Ibarra Corretgé @saghul> comments
Signed-off-by: Pablo Saavedra <psaavedra@igalia.com>
Unfortunately, as the Jitsi Meet development evolved the routing mechanism
became more complex and thre logic ended up spread across multiple parts of the
codebase, which made it hard to follow and extend.
This change aims to fix that by rewriting the routing logic and centralizing it
in (pretty much) a single place, with no implicit inter-dependencies.
In order to arrive there, however, some extra changes were needed, which were
not caught early enough and are thus part of this change:
- JitsiMeetJS initialization is now synchronous: there is nothing async about
it, and the only async requirement (Temasys support) was lifted. See [0].
- WebRTC support can be detected early: building on top of the above, WebRTC
support can now be detected immediately, so take advantage of this to simplify
how we handle unsupported browsers. See [0].
The new router takes decissions based on the Redux state at the time of
invocation. A route can be represented by either a component or a URl reference,
with the latter taking precedence. On mobile, obviously, there is no concept of
URL reference so routing is based solely on components.
[0]: https://github.com/jitsi/lib-jitsi-meet/pull/779
The visibility of the toolbar can be toggled by interacting with the main screen.
This change allows the toolbar to be configured to be 'always visible'. This voids
the 'toggle' functionality.
As part of the work on fixing the problem with the multiplying
thumbnails, we've associated remote participant w/ JitsiConference.
However, there are periods of time when multiple JitsiConferences are in
the redux state (and that period is going to be shorted by
StateListenerRegistry). In order to give more control to the feature
base/participants, reduce the occurrences of direct access to the
features/base/participants redux state and utilize the feature's
existing read access functions. Which will allow us in the future to
enhance these functions to access participants which are relevant to the
current conference of interest to the user only.
- add 10px of padding on the sizes of the toolbar
- make the button margin smaller (from 10 to 7)
- increate the secondary button factor to 85%, thus rising the maximum secondary
button size to 50 (from the previous 48)
Since the main conference container is no longer "clickable" there must
be a way for clicking on the "large video". A clickable TestHint nested
in ParticipantView makes it easier for dealing with the fact that the
click handler is not always on the same component (required for the
pinch and zoom feature to work correctly).
Be explciit about the appearance we desire, since each mounted StaturBar
component will override the existing values. In this case, the problem was
caused because the default on iOS is dark, whereas it's light on Android.
Set it to light so it works consistently across both, which is what we want.
* feat(Deeplinking): Implement for web.
* ref(unsupported_browser): Move the mobile version to deeplinking feature
* feat(deeplinking_mobile): Redesign.
* fix(deeplinking): Use interface.NATIVE_APP_NAME.
* feat(dial_in_summary): Add the PIN to the number link.
* fix(deep_linking): Handle use case when there isn't deep linking image.
* fix(deep_linking): css
* fix(deep_linking): deeplink -> "deep linking"
* fix(deeplinking_css): Remove position: fixed
* docs(deeplinking): Add comment for the openWebApp action.
Adds TestConnectionInfo component which exposes some internal app state
to the jitsi-meet-torture through the UI accessibility layer. This
component will render only if config.testing.testMode is set to true.
TouchableWithoutFeedback and TouchableHighlight interfere with the
implementation of 'pinch to zoom' to come. We prepare for it by driving
the onClick/onPress handler(s) out of Conference, through LargeVideo and
ParticipantView into Video itself where the bulk of 'pinch to zoom' will
be implemented.
In preparation for "pinch to zoom" support in desktop streams on mobile, make
certain Views not intervene in touch event handling. While the modification is
necessary for "pinch to zoom" which is coming later, it really makes sense for
the modified Views to not be involved in touching because they're used to aid
layout and/or animations and are to behave to the user as if they're not there.
The difference from this change and 88325ae is there is no
attempt to do this in redux. This is the safer change in that
the cleanup logic is known only to trigger on hangup.
This reverts commit 88325aeef2.
Turns out a conference with a password triggers a failed conference
join. It's going to be tricky to decipher when to do actual
cleanup, and where to shove that code, so reverting is easier for
now.
Destroy local tracks and also destroy large video so the
user does not wonder why camera (and mic) are still enabled
even though hangup has been pressed.
On web Conference is pretty much all there is, but on mobile we have the welcome
page and the blank page. If we fail to load config.js, for example we will still
be in the welcome page *and* we want to show an error overlay.
With the introduction of wide and narrow layouts the margins of the
Filmstrip and the Toolbox became inconsistent. For example, the
Filmstrip's top in the wide layout was nearer to the top than the
secondary Toolbar.
Adds the ability to detect app area's aspect ratio on react-native
through the features/base/aspect-ratio.
Makes conference, filmstrip and toolbox react to the aspect ratio
changes and display filmstrip on the shorter side of the screen.
* WiP(invite-ui): Initial move of invite UI to invite button
* Adjusts styling to fit both horizontal and vertical filmstrip
* Removes comment and functions not needed
* [squash] Addressing various review comments
* [squash] Move invite options to a separate config
* [squash] Adjust invite button styles until we fix the whole UI theme
* [squash] Fix the remote videos scroll
* [squash]:Do not show popup menu when 1 option is available
* [squash]: Disable the invite button in filmstrip mode
* feat(connection-indicator): implement automatic hiding on good connection (#2009)
* ref(connection-stats): use PropTypes package
* feat(connection-stats): display a summary of the connection quality
* feat(connection-indicator): show empty bars for interrupted connection
* feat(connection-indicator): change background color based on status
* feat(connection-indicator): implement automatic hiding on good connection
* fix(connection-indicator): explicitly set font size
Currently non-react code will set an icon size on ConnectionIndicator.
This doesn't work on initial call join in vertical filmstrip after
some changes to support hiding the indicator. The chosen fix is
passing in the icon size to mirror what would happe with full
filmstrip reactification.
* ref(connection-stats): rename statuses
* feat(connection-indicator): make hiding behavior configurable
The original implementation made the auto hiding of the indicator
configured in interfaceConfig.
* fix(connection-indicator): readd class expected by torture tests
* fix(connection-indicator): change connection quality display styling
Bold the connection summary in the stats popover so it stands out.
Change the summaries so there are only three--strong, nonoptimal,
poor.
* fix(connection-indicator): gray background on lost connection
* feat(icons): add new gsm bars icon
* feat(connection-indicator): use new 3-bar icon
* ref(icons): remove icon-connection and icon-connection-lost
Both have been replaced by icon-gsm-bars so they are not
being referenced anymore. Mobile looks to have connect-lost
as a separate icon in font-icons/jitsi.json.
* fix(defaultToolbarButtons): Fixes unresolved InfoDialogButton component problem
* [squash]: Makes invite button fit the container
* [squash]:Addressing invite truncate, remote menu position and comment
* [squash]:Fix z-index in horizontal mode, z-index in lonely call
* [squash]: Fix filmstripOnly property, remove important from css
ESLint 4.8.0 discovers a lot of error related to formatting. While I
tried to fix as many of them as possible, a portion of them actually go
against our coding style. In such a case, I've disabled the indent rule
which effectively leaves it as it was before ESLint 4.8.0.
Additionally, remove jshint because it's becoming a nuisance with its
lack of understanding of ES2015+.
* Javadoc introduced @code as a replacement of <code> and <tt> which is
better aligned with other javadoc tags such as @link. Use it in the
Java source code. If we switch to Kotlin, then we'll definitely use
Markdown.
* There are more uses of @code in the JavaScript source code than <tt>
so use @code for the sake of consistency. Eventually, I'd rather we
switch to Markdown because it's easier on my eyes.
* Xcode is plain confused by @code and @link. The Internet says that
Xcode supports the backquote character to denote the beginning and end
of a string of characters which should be formatted for display as
code but it doesn't work for me. <tt> is not rendered at all. So use
the backquote which is rendered itself. Hopefully, if we switch to
Markdown, then it'll be common between JavaScript and Objective-C
source code.
When do we need tracks?
- Welcome page (only the video track)
- Conference (depends if starting with audio / video muted is requested)
When do we need to destroy the tracks?
- When we are not in a conference and there is no welcome page
In order to accommodate all the above use cases, a new component is introduced:
BlankWelcomePage. Its purpose is to take the place of the welcome page when it
is disabled. When this component is mounted local tracks are destroyed.
Analogously, a video track is created when the (real) welcome page is created,
and all the desired tracks are created then the Conference component is created.
What are desired tracks? These are the tracks we'd like to use for the
conference that is about to happen. By default both audio and video are desired.
It's possible, however, the user requested to start the call with no
video/audio, in which case it's muted in base/media and a track is not created.
The first time the app starts (with the welcome page) it will request permission
for video only, since there is no need for audio in the welcome page. Later,
when a conference is joined permission for audio will be requested when an audio
track is to be created. The audio track is not destroyed when the conference
ends. Yours truly thinks this is not needed since it's a stopped track which is
not using system resources.
* feat(notifications): implement a react/redux notification system
* squash into impl explicit timeout, style
* ref(notifications): convert toastr notifications to use react
* ref(toastr): remove library
* squash into conversion: pass timeout
* squash into clean remove from debian patch
* fix(filmstrip-only): vertically align center the toolbar
Use top 50% to position the toolbar's top at the vertical center
of the iframe. Then use transform 50% to move the toolbar itself
up 50% so its middle matches the middle of the iframe.
* squash: toolbox should center with filmstrip
We've had Filmstrip & LargeVideo React Components on mobile/React Native
from the start. We didn't have them on Web (because the rewrite in React
is not complete yet). However, that led to differences in the React
Component Conference on Web and mobile. In an effort to get closer to
merging the React Component Conference on Web and mobile, introduce the
React Components Filmstrip & LargeVideo on Web even if a minimal
render-only form at this time.
The video status labels, which include recording and hd status,
have been moved back to the top left while in vertical filmstrip
mode. The following had to be done:
- Remove styling to move the labels to the bottom left
- For VideoStatusLabel, move filmstrip remote video count, toggle
state, and 1:1 state into redux.
- Use middleware to emit out to the Recording label when the
filmstrip changes.
- Create an empty Filmstrip file for web and identify the existing
Filmstrip component as native.
The 1:1 call UI and vertical filmstrip act on remote videos
while leaving local video alone. To facilitate acting only on
remote videos, place remote videos into their own container element.
In its current implementation, the VideoStatusLabel shows HD based on peer
connection stats. These stats will be available on temasys browsers soon but
will remain unavailable on Firefox, which does not collect height/width stats.
To support VideoStatusLabel showing cross-browser, move the high-definition
detection out of stat sniffing and instead check the video element itself using
an interval in LargeVideoManager. (An interval was used because the temasys
video object does not support the onresize event.) Also, add a cleanup path from
conference.web to LargeVideoManager to remove the interval.
Move the HD label into the newly renamed VideoStatusLabel
component. That way it cannot be possible for the audio only
label and the HD label to display simultaneously.
Audio only mode can be used to save bandwidth. In this mode local video is muted
and last N is set to 0, thus disabling all remote video.
When this mode is enabled avatars are shown.
We seemed to be using the names "film strip" and "filmstrip" (and,
consequently, their source code-conscious forms such as film-strip,
FilmStrip, etc.) In order to comply with our coding style which requires
a consistent one name for a given abstraction, choose one name and
rename the uses of the other name.
Wikipedia has a definition of a "filmstrip", I couldn't find a "film
strip". I guess our abstraction can be seen as what's described there.
When I google "film strip", I get results about "filmstrip" at the top.
That's why I chose "filmstrip".
Certain uses of "film strip" such as interfaceConfig.filmStripOnly and
in the external API I left untouched in an attempt to preserve
compatibility.
I wasn't sure whether CSS was tangled in compatibility so I made a
choice and renamed there was well.
Looks like Android gets confused as to what surface to blit when we hide or
show toolbars. Setting a border on the container, seems to force the entire
area to blit properly.
Other attempted approaches, with no success:
- zIndex of -100
- width and height of 0
- opacity of 0 and setting 'disabled' on touch containers
This patch applies the workaround in the welcome page and conference containers.
Recently, we reimplemented the watermarks in React. Unfortunately, we
didn't take into account film strip-only mode.
Additionally, we duplicated watermark-related source code on the Welcome
and Conference pages.
As a step toward merging jitsi-meet-react with jitsi-meet to share as
much source code as possible between mobile and Web, merge the part of
jitsi-meet-react's source tree which supports mobile inside the
jitsi-meet source tree and leave jitsi-meet-react's Web support in the
source code revision history but don't have it in master anymore because
it's different from jitsi-meet's Web support. In other words, the two
projects are mechanically merged at the file level and don't really
share source code between mobile and Web.
As an intermediate step on the path to merging jitsi-meet and
jitsi-meet-react, import the whole source code of jitsi-meet-react as it
stands at
2f23d98424
i.e. the lastest master at the time of this import. No modifications are
applied to the imported source code in order to preserve a complete
snapshot of it in the repository of jitsi-meet and, thus, facilitate
comparison later on. Consequently, the source code of jitsi-meet and/or
jitsi-meet-react may not work. For example, jitsi-meet's jshint may be
unable to parse jitsi-meet-react's source code.
Hristo Terezov
Bettenbuk Zoltan
Saúl Ibarra Corretgé
bgrozev
Ruben Kerkhof
theunafraid
Vlad Piersec
Matthias Herzog
paweldomas
Saúl Ibarra Corretgé
Leonard Kim
Pratik Shah
virtuacoplenny
Lyubo Marinov
Pablo Saavedra
Guus der Kinderen
yanas
Ilya Daynatovich
Saúl Ibarra Corretgé
damencho
Любомир Маринов
Lyubomir Marinov
Ilya Daynatovich