The container needs to store user's ID in order for the 'isOnLargeVideo'
logic to work correctly when user has no stream (previously it was
obtained from stream which can be null/undefined).
Popover works by first creating a DOM element with display none
then having jquery calculate its width and new position and
then setting display to table. This does not work with p2p
connection stats, which are much wider than the default width
of the popover. What will happen is when display table is set,
the width will increase greatly so the positioning will be off.
The workaround here is to set display table as the default
display but toggle visibility instead.
* feat(display-name): convert to React
- Create a new React Component for displaying and updating display
names on small videos
- The updating of the Component is defined in the parent class
SmallVideo, which children will get access to through prototype
copying
- Create a new actionType and middleware so name changes that occur
in DisplayName can be propogated to outside redux
- Update the local video's DisplayName when a conference is joined
or else the component may keep an undefined user id
* squash: query for the container, not the el owned by react
- Create a new ConnectionIndicator component for displaying an
icon for connection quality and for triggering a popover. The
popover handling has been left in ConnectionIndicator for now,
which follows the existing implementation.
- Remove the unused method "connectionIndicatorShowMore"
- Change the implementation of existing methods that update the
connection indicator to call the same method which will rerender
the indicator completely.
With popover usage now only passing in React Components, the
logic of removing the popover and recreating its html with
every update is not necessary. Instead allow React to update
the popover contents.
Because of this change, mouse event handlers are not recreated
on each update, so it is possible for mouseleave to fire after
the size of the popover shrinks when collapsing to hide more stats,
forcing the mouse out of the popover. To prevent this, padding has
been added to the top of the popover so on resize the mouse will
still be over the popover. The padding has the added bonus of
fixing an issue where the popover would not close until mouseenter
was triggered after size collapse, but it adds the drawback of
requiring more upward mouse travel to close the popover.
Move all logic related to displaying a table of connection stats to a React
Component. The actual parsing logic was modified as little as possible as the
focus is moving display to React.
Vertical filmstrip has a scrollbar to scroll through all remote
video thumbnails instead of scaling width and height to force all
thumbnails to display on screen. The scaling is not necessary in
vertical filmstrip mode and instead causes some UI spacing issues
with the video status label.
Also addressed a typo in "removeVideoWidth" near the area of the
changed logic.
- Create new React Components for RemoteVideoMenu and its
buttons
- Remove existing menu creation from RemoteVideo
- Refactor RemoteVideo so all function binding happens once in
the constructor, removing the need to rebind when updating
the RemoteVideoMenu
- Allow popover to append and remove React Components from itself
- Refactor popover so post-popover creation calls are broken out and
popover removal behavior is all done in one function.
In RemoteVideo, creation of the RemoteVideoMenu (popover) is
skipped if in filmstrip only mode. However, updateRemoteVideoMenu
is called by other components, and that tries to access popover
and will error.
Add a defensive check for now as filmstrip is being rewritten
for react.
When using onplay in firefox, the event fires before data is flowing,
which can cause videoHeight and videoWidth to be 0 during resizing.
By using onplaying, there is some assurance data is being received,
so videoHeight and videoWidth should be set.
Add ninja icon which wil be displayed when user's connection status is
inactive.
Apply grey filter only for interrupted state.
Do not use isLastN directly, but check ParticipantConnectionStatus.
* fix(large-video): ensure switch to local video when all others leave
This handles the case where User A and B are in a call and B has
no audio or video. Then B leaves. User A would see User B left
on large video. Instead, User A should see self view on large.
* squash: always update large video if it is empty
* squash: add largeVideo check for filmstrip only mode
* include local.html file meant to define local analytics properties
include all specified local analytics properties in analytics events
* use new variable name jitsiDeploymentInfo to represent more general use as local deployment information collection
The counterpart of the external API in the Jitsi Meet Web app uses the
search URL param jwt to heuristically detect that the Web app is very
likely embedded (as an iframe) and, consequently, needs to forcefully
enable itself. It was looking at whether there was a JSON Web Token
(JWT) but that logic got broken when the JWT support was rewritten
because the check started happening before the search URL param jwt was
parsed.
It is possible for a connection update to come during a large video update,
between its promises, which would result in the update NOT triggering another
large video update because an update is in progress. This can cause a state
where a connection status overlay is displayed over a video in a state that
does not match the actual video state, like the restoring overlay displaying
on active video.
Fixes a TypeError: Cannot set property 'innerHTML' of undefined
at o (Chat.js:61)
at Object.updateChatConversation (Chat.js:271)
that is thrown when joining a conference with messages already set to the chat. The error used to remove a strophe handler and chat was not working at all for those seeing the error.
* fix(large-video): trigger update after timeout for 1-on-1 calls
Currently no video switch happens if a user joins audio and video
muted. For example, User A is in a call and User B joins with no
mic and camera. User A will keep seeing local video on large video.
The fix is to set a timeout, of a somewhat arbitrary 3 seconds, to
show User B on large video.
* SQUASH: wrap videoElement access in if
* SQUASH: split out remoteVideoActive logic
* fix(vertical-filmstrip): different label animations for filmstrip states
Instead of one timing for sliding the video status label left and right,
have different timings depending on the filmstrip state. To facilitate
triggering the different animations, add more classes to the labels
that need to move that specify the filmstrip state.
- Faster transition if focusing on self-view with videos present so
the label does not overlap videos transitioning from 0 opacity.
- Transition delay when de-focusing on self-view with videos present
so videos have time to go away before the label moves over them.
- Maintain no movement if there are no videos, regardless of
filmstrip toggle state.
- Different delays for when the filmstrip is being toggled visible
and hidden if there are remote videos visible.
* SQUASH: remove remote videos count
* SQUASH: add docs to scss
The video status labels, which include recording and hd status,
have been moved back to the top left while in vertical filmstrip
mode. The following had to be done:
- Remove styling to move the labels to the bottom left
- For VideoStatusLabel, move filmstrip remote video count, toggle
state, and 1:1 state into redux.
- Use middleware to emit out to the Recording label when the
filmstrip changes.
- Create an empty Filmstrip file for web and identify the existing
Filmstrip component as native.
- Expose an api on Filmstrip to hide the remote videos container, which does so
by adding a class
- Modify listeners for user join, leave, share video to call the api
- Hide the container when there is 1 or fewer remote participants
- Always show the container if self view is in focus
- Show the container if the number of remote thumbnails does not match the count
of remote participants, such as the case of sharing a video
- Add a class to the body when in vertical filmstrip mode
- Override styles as necessary to support the mode
- Add an option to make tooltips display from the left
- Move the HD Label to the bottom left
- Move the remote video menu to the bottom left, move the mute
icons to the bottom right
- Scale the local video's height and width to fit the filmstrip
The 1:1 call UI and vertical filmstrip act on remote videos
while leaving local video alone. To facilitate acting only on
remote videos, place remote videos into their own container element.
In its current implementation, the VideoStatusLabel shows HD based on peer
connection stats. These stats will be available on temasys browsers soon but
will remain unavailable on Firefox, which does not collect height/width stats.
To support VideoStatusLabel showing cross-browser, move the high-definition
detection out of stat sniffing and instead check the video element itself using
an interval in LargeVideoManager. (An interval was used because the temasys
video object does not support the onresize event.) Also, add a cleanup path from
conference.web to LargeVideoManager to remove the interval.
During the implementation of starting as video muted, a check
was put in place to update the local thumbnail view container's
known local track only if the track was not muted. This can
cause the container to become desynced with the current local
track.(Ideally in the future all state would be in redux so this
manual syncing would not be needed.) Removing the if-muted
check seems to cause no side-effects and makes implementation of
device-switch-while-audio-only a lot simpler because new tracks
can be muted and used immediately.
Move the HD label into the newly renamed VideoStatusLabel
component. That way it cannot be possible for the audio only
label and the HD label to display simultaneously.
Audio only mode can be used to save bandwidth. In this mode local video is muted
and last N is set to 0, thus disabling all remote video.
When this mode is enabled avatars are shown.
* fix(react/participant): store display name in redux
* feat(remotecontrol): Add option to display the authorization dialog in meet
* feat(remotecontrol): Enable ESLint and Flow
The functionality around logging including logging_config.js i.e.
loggingConfig and the other classes and/or functions that initialize
loggers for Jits Meet truly deserves a feature of its own. Start getting
in that direction on both Web and mobile by introducing
features/base/logging and bringing loggingConfig to mobile.
@virtuacoplenny, the changes of this commit are not necessarily in
source code that you introduced in
https://github.com/jitsi/jitsi-meet/pull/1499 but I saw violations in
files modified in the PR which I had to read in order to understand the
PR.
Converting the invite modal includes the following:
- Creating new react components to display InviteDialog. The
main parent components are ShareLink and PasswordOverview,
the later handles displaying lock state and password editing.
These components do not make use of atlaskit as the component
for input does not yet support readonly, so for consistency
within the modal content no atlaskit was used.
- Using redux for keeping and accessing lock state instead of
RoomLocker.
- Publicly exposing the redux action lockStateChanged for direct
calling on lock events experienced on the web client.
- Removing Invite, InviteDialogView, and RoomLocker and references
to them.
- Handling errors that occur when setting a password to preserve
existing web funtionality.
Move logic to open device selection outside of SettingsMenu so
it can be called independently by either SettingsMenu or by
the settings button itself if no other settings but devices will
be displayed.
Saúl Ibarra Corretgé reported that Recording shows an error dialog
stating "There was an error connecting to your camera". Hristo Terezov
and Yana Stamcheva traced that the problem originates in
da4425b5c0
and, more specifically, is caused by a different order of execution due
to the move of the invocation of the function Recording.init.
The solution is to bring back the execution location of Recording.init.
If toggle audio or video is executed too early and the local
tracks don't exist we fail to execute the operation. Now we store
the mute state and we are executing it after the tracks are
created
If toggle SS is executed too early and lib-jitsi-meet is not yet
initialized toggle SS will fail. Now we are storing the whether
SS is on or off and when lib-jitsi-meet is ready we are starting
SS if needed.
Cleanup existing logic for displaying and updating device
selection settings in the settings menu. In its place
is a button to open the device selection modal.
The Device Selection modal consists of:
- DeviceSelection, an overly smart component responsible for
triggering stream creation and cleanup.
- DeviceSelector for selector elements.
- VideoInputPreview for displaying a video preview.
- AudioInputPreview for displaying a volume meter.
- AudioOutputPreview for a test sound output link.
Store changes include is primarily storing the list of
available devices in redux. Other app state has been left
alone for future refactoring.
We seemed to be using the names "film strip" and "filmstrip" (and,
consequently, their source code-conscious forms such as film-strip,
FilmStrip, etc.) In order to comply with our coding style which requires
a consistent one name for a given abstraction, choose one name and
rename the uses of the other name.
Wikipedia has a definition of a "filmstrip", I couldn't find a "film
strip". I guess our abstraction can be seen as what's described there.
When I google "film strip", I get results about "filmstrip" at the top.
That's why I chose "filmstrip".
Certain uses of "film strip" such as interfaceConfig.filmStripOnly and
in the external API I left untouched in an attempt to preserve
compatibility.
I wasn't sure whether CSS was tangled in compatibility so I made a
choice and renamed there was well.
Strings are not translated when opening the profile side panel on FF. It was that we were creating profile panel html after i18n library had loaded and had translated the rest of the html.
* Uses new peer connection statuses to check and show different user msgs.
Checks for interrupted state of peer connection and shows appropriate messages. In case of inactive or restoring state a message is show to user that video was stopped on purpose. Removes some unused parameters from the event handlers about peer connection status change.
* Removes isParticipantConnectionActive.
https://github.com/jitsi/jitsi-meet/pull/1397 (React Toolbar) is huge at
the time of this writing. In order to reduce it, I'm extracting changes
not directly related to React-ifying the Toolbar such as added jsdocs
and source code formatting.
Replaces changeAvatarID, changeAvatarURL and changeEmail with
participantUpdated action.
participantUpdated can be fired for local user without id. This
fixes the problem with updating the local user before the user
join the conference which results in fix for failing to execute
commands for avatarID, avatarURL and email right after the iframe
api creates the iframe with Jitsi Meet.
If executeCommand('displayName') is executed before Jitsi Meet
is fully initialized some listeners were not added and the
display name was not changed.
Strings are not translated when opening the settings side panel. It was that we were creating settings panel html after i18n library had loaded and had translated the rest of the html.
The element selecting the current language was also not translated, which end up with no selection in the UI for the current language.
* Handle last n in the client
* fix(LargeVideoManager.js): Fixes check for low bandwidth. Needs more work
* fix(LargeVideoManager.js): Fixes the Shared Video test.
* fix(LargeVideoManager): Fix shared video view and remove last n checks.
* fix(LargeVideoManager): Fixes jsdoc comment
* fix(RemoteVideo): Fix connection status check
* fix(LargeVideoManager,RemoteVideo): Syntax errors
If half the file is written in ES6, it is easier to read if the rest of
the file is in ES6 as well. If ES6 is used, then const is better than
let. If source code is shorter yet as readable as the long version, then
prefer the short version.
window.location calls it reload so util/helpers shouldn't call it
redirect because UI/util/UIUtil has it is own redirect which is the
assign of window.location.
Recently, we reimplemented the watermarks in React. Unfortunately, we
didn't take into account film strip-only mode.
Additionally, we duplicated watermark-related source code on the Welcome
and Conference pages.
paweldomas
virtuacoplenny
hristoterezov
bbaldino
Boris Grozev
Emil Ivov
Sergio Garcia Murillo
Ilya Daynatovich
Lyubo Marinov
Aaron van Meerten
damencho
yanas
Saúl Ibarra Corretgé
Aaron van Meerten
Lyubomir Marinov
Illia Daynatovich