kicad/pcbnew/gendrill.cpp

1526 lines
46 KiB
C++
Raw Normal View History

/***********************************************/
/* Routine de Generation du fichier de percage */
/***********************************************/
#include "fctsys.h"
#include "gr_basic.h"
#include "common.h"
#include "plot_common.h"
#include "trigo.h"
#include "pcbnew.h"
#include "pcbplot.h"
#include "autorout.h"
#include "macros.h"
#include "protos.h"
#include "wx/defs.h"
/*
Generation du fichier de percage en format EXCELLON
Variantes supportees:
- Decimal : coord flottantes en pouces
- Metric : coord entieres en 1/10000 mm
format "Trailling Zero" ( TZ )
On peut aussi generer le plan de percage en format HPGL ou PS
*/
/* Routines importees */
class FORET
{
public:
int m_TotalCount;
int m_OvalCount;
int m_Diameter;
};
/* drill precision format */
class DrillPrecision
{
public:
int m_lhs;
int m_rhs;
public:
DrillPrecision(int l, int r) {m_lhs=l; m_rhs=r;}
};
/* zeros format */
enum zeros_fmt {
DECIMAL_FORMAT,
SUPPRESS_LEADING,
SUPPRESS_TRAILING,
KEEP_ZEROS
};
/* Routines Locales */
static void Fin_Drill(void);
static void PlotDrillSymbol(const wxPoint & position,int diametre,int num_forme,int format);
static void PlotOvalDrillSymbol(const wxPoint & position,const wxSize & size,int orient,int format);
/* Variables locales : */
static int DrillToolsCount; /* Nombre de forets a utiliser */
static float conv_unit; /* coeff de conversion des unites drill / pcb */
static bool Unit_Drill_is_Inch = TRUE; /* INCH,LZ (2:4) */
static int s_Zeros_Format = DECIMAL_FORMAT;
static DrillPrecision s_Precision(2,4);
static bool DrillOriginIsAuxAxis; // Axis selection (main / auxiliary) for Drill Origin coordinates
static wxPoint File_Drill_Offset; /* Offset des coord de percage pour le fichier g<>n<EFBFBD>r<EFBFBD> */
static bool Minimal = false;
static bool Mirror = true;
// Keywords for read and write config
#define ZerosFormatKey wxT("DrillZerosFormat")
#define LeftPrecisionKey wxT("DrillLeftPrecisionOpt")
#define RightPrecisionKey wxT("DrillRightPrecisionOpt")
#define MirrorKey wxT("DrillMirrorYOpt")
#define MinimalKey wxT("DrillMinHeader")
#define UnitDrillInchKey wxT("DrillUnit")
#define DrillOriginIsAuxAxisKey wxT("DrillAuxAxis")
/****************************************/
/* Dialog box for drill file generation */
/****************************************/
enum id_drill {
ID_CREATE_DRILL_FILES = 1370,
ID_CLOSE_DRILL,
ID_SEL_DRILL_UNITS,
ID_SEL_DRILL_SHEET,
ID_SEL_DRILL_REPORT,
ID_SEL_ZEROS_FMT,
ID_SEL_PRECISION
};
class WinEDA_DrillFrame: public wxDialog
{
WinEDA_PcbFrame * m_Parent;
wxRadioBox * m_Choice_Drill_Map;
wxRadioBox * m_Choice_Drill_Report;
wxRadioBox * m_Choice_Unit;
wxRadioBox * m_Choice_Drill_Offset;
WinEDA_EnterText * m_EnterFileNameDrill;
WinEDA_ValueCtrl * m_ViaDrillCtrl;
WinEDA_ValueCtrl * m_PenSpeed;
WinEDA_ValueCtrl * m_PenNum;
wxCheckBox * m_Check_Mirror;
wxCheckBox * m_Check_Minimal;
wxRadioBox * m_Choice_Zeros_Format;
wxRadioBox * m_Choice_Precision;
// Constructor and destructor
public:
WinEDA_DrillFrame(WinEDA_PcbFrame *parent);
~WinEDA_DrillFrame(void) {};
private:
void OnQuit(wxCommandEvent& event);
void SetParams(void);
void GenDrillFiles(wxCommandEvent& event);
void GenDrillMap(int format);
void UpdatePrecisionOptions(wxCommandEvent& event);
void UpdateConfig(void);
int Plot_Drill_PcbMap( FORET * buffer, int format);
void GenDrillReport(void);
int Gen_Liste_Forets( FORET * buffer,bool print_header);
int Gen_Drill_File_EXCELLON( FORET * buffer);
void Gen_Line_EXCELLON(char *line, float x, float y);
void Init_Drill(void);
DECLARE_EVENT_TABLE()
};
BEGIN_EVENT_TABLE(WinEDA_DrillFrame, wxDialog)
EVT_BUTTON(ID_CLOSE_DRILL, WinEDA_DrillFrame::OnQuit)
EVT_BUTTON(ID_CREATE_DRILL_FILES, WinEDA_DrillFrame::GenDrillFiles)
EVT_RADIOBOX(ID_SEL_DRILL_UNITS, WinEDA_DrillFrame::UpdatePrecisionOptions)
EVT_RADIOBOX(ID_SEL_ZEROS_FMT, WinEDA_DrillFrame::UpdatePrecisionOptions)
END_EVENT_TABLE()
#define H_SIZE 550
#define V_SIZE 250
/*************************************************************************/
WinEDA_DrillFrame::WinEDA_DrillFrame(WinEDA_PcbFrame *parent):
wxDialog(parent, -1, _("Drill tools"), wxDefaultPosition, wxSize(H_SIZE, V_SIZE),
DIALOG_STYLE)
/*************************************************************************/
{
m_Parent = parent;
SetFont(*g_DialogFont);
SetReturnCode(1);
wxBoxSizer * MainBoxSizer = new wxBoxSizer(wxHORIZONTAL);
SetSizer(MainBoxSizer);
wxBoxSizer * LeftBoxSizer = new wxBoxSizer(wxVERTICAL);
wxBoxSizer * MiddleBoxSizer = new wxBoxSizer(wxVERTICAL);
wxBoxSizer * RightBoxSizer = new wxBoxSizer(wxVERTICAL);
MainBoxSizer->Add(LeftBoxSizer, 0, wxGROW|wxALL, 5);
MainBoxSizer->Add(MiddleBoxSizer, 0, wxGROW|wxALL, 5);
MainBoxSizer->Add(RightBoxSizer, 0, wxALIGN_CENTER_VERTICAL|wxALL, 5);
/* first column, NC drill options */
wxString choice_unit_msg[] =
{_("millimeters"), _("inches") };
m_Choice_Unit = new wxRadioBox(this, ID_SEL_DRILL_UNITS,
_("Drill Units:"),
wxDefaultPosition,wxSize(-1,-1),
2,choice_unit_msg,1,wxRA_SPECIFY_COLS);
if ( Unit_Drill_is_Inch )m_Choice_Unit->SetSelection(1);
LeftBoxSizer->Add(m_Choice_Unit, 0, wxGROW|wxALL, 5);
wxString choice_zeros_format_msg[] = {
_("decimal format"),
_("suppress leading zeros"), _("suppress trailing zeros"), _("keep zeros")
};
m_Choice_Zeros_Format = new wxRadioBox(this, ID_SEL_ZEROS_FMT,
_("Zeros Format"),
wxDefaultPosition,wxSize(-1,-1),
4,choice_zeros_format_msg,1,wxRA_SPECIFY_COLS);
m_Choice_Zeros_Format->SetSelection(s_Zeros_Format);
LeftBoxSizer->Add(m_Choice_Zeros_Format, 0, wxGROW|wxALL, 5);
wxString *choice_precision_msg;
wxString choice_precision_inch_msg[] = { _("2:3"), _("2:4")};
wxString choice_precision_metric_msg[] = { _("3:2"), _("3:3")};
if (Unit_Drill_is_Inch)
choice_precision_msg = choice_precision_inch_msg;
else
choice_precision_msg = choice_precision_metric_msg;
m_Choice_Precision = new wxRadioBox(this, ID_SEL_PRECISION,
_("Precision"),
wxDefaultPosition, wxSize(-1,-1),
2,choice_precision_msg,1,wxRA_SPECIFY_COLS);
LeftBoxSizer->Add(m_Choice_Precision, 0, wxGROW|wxALL, 5);
wxString ps;
ps << s_Precision.m_lhs << wxT(":") << s_Precision.m_rhs;
m_Choice_Precision->SetStringSelection(ps);
if (s_Zeros_Format==DECIMAL_FORMAT) m_Choice_Precision->Enable(false);
wxString choice_drill_offset_msg[] =
{_("absolute"), _("auxiliary axis")};
m_Choice_Drill_Offset = new wxRadioBox(this, ID_SEL_DRILL_SHEET,
_("Drill Origin:"),
wxDefaultPosition,wxSize(-1,-1),
2,choice_drill_offset_msg,1,wxRA_SPECIFY_COLS);
if ( DrillOriginIsAuxAxis ) m_Choice_Drill_Offset->SetSelection(1);
LeftBoxSizer->Add(m_Choice_Drill_Offset, 0, wxGROW|wxALL, 5);
/* second column */
wxString choice_drill_map_msg[] =
{_("None"), _("drill sheet (HPGL)"), _("drill sheet (PostScript)")};
m_Choice_Drill_Map = new wxRadioBox(this, ID_SEL_DRILL_SHEET,
_("Drill Sheet:"),
wxDefaultPosition,wxSize(-1,-1),
3,choice_drill_map_msg,1,wxRA_SPECIFY_COLS);
MiddleBoxSizer->Add(m_Choice_Drill_Map, 0, wxGROW|wxALL, 5);
wxString choice_drill_report_msg[] =
{_("None"), _("Drill report") };
m_Choice_Drill_Report = new wxRadioBox(this, ID_SEL_DRILL_REPORT,
_("Drill Report:"),
wxDefaultPosition,wxSize(-1,-1),
2,choice_drill_report_msg,1,wxRA_SPECIFY_COLS);
MiddleBoxSizer->Add(m_Choice_Drill_Report, 0, wxGROW|wxALL, 5);
m_ViaDrillCtrl = new WinEDA_ValueCtrl(this, _("Via Drill"),
g_DesignSettings.m_ViaDrill, g_UnitMetric, MiddleBoxSizer,
m_Parent->m_InternalUnits);
m_PenNum = new WinEDA_ValueCtrl(this, _("Pen Number"),
g_HPGL_Pen_Num, 2, MiddleBoxSizer, 1);
m_PenSpeed = new WinEDA_ValueCtrl(this, _("Speed (cm/s)"),
g_HPGL_Pen_Speed, CENTIMETRE, MiddleBoxSizer, 1);
m_Check_Mirror = new wxCheckBox(this, -1, _("mirror y axis"));
m_Check_Mirror->SetValue(Mirror);
MiddleBoxSizer->Add(m_Check_Mirror, 0, wxGROW|wxALL, 5);
m_Check_Minimal = new wxCheckBox(this, -1, _("minimal header"));
m_Check_Minimal->SetValue(Minimal);
MiddleBoxSizer->Add(m_Check_Minimal, 0, wxGROW|wxALL, 5);
/* third column, buttons */
wxButton * Button = new wxButton(this, ID_CREATE_DRILL_FILES,
_("&Execute"));
Button->SetForegroundColour(*wxRED);
RightBoxSizer->Add(Button, 0, wxGROW|wxALL, 5);
Button = new wxButton(this, ID_CLOSE_DRILL, _("&Close"));
Button->SetForegroundColour(*wxBLUE);
RightBoxSizer->Add(Button, 0, wxGROW|wxALL, 5);
GetSizer()->Fit(this);
GetSizer()->SetSizeHints(this);
Centre();
}
/**************************************/
void WinEDA_DrillFrame::SetParams(void)
/**************************************/
{
Unit_Drill_is_Inch = (m_Choice_Unit->GetSelection() == 0) ? FALSE : TRUE;
Minimal = m_Check_Minimal->IsChecked();
Mirror = m_Check_Mirror->IsChecked();
s_Zeros_Format = m_Choice_Zeros_Format->GetSelection();
DrillOriginIsAuxAxis = m_Choice_Drill_Offset->GetSelection();
g_DesignSettings.m_ViaDrill = m_ViaDrillCtrl->GetValue();
Unit_Drill_is_Inch = m_Choice_Unit->GetSelection();
g_HPGL_Pen_Speed = m_PenSpeed->GetValue();
g_HPGL_Pen_Num = m_PenNum->GetValue();
if ( m_Choice_Drill_Offset->GetSelection() == 0)
File_Drill_Offset = wxPoint(0,0);
else
File_Drill_Offset = m_Parent->m_Auxiliary_Axis_Position;
/* get precision from radio box strings (this just makes it easier to
change options later)*/
wxString ps = m_Choice_Precision->GetStringSelection();
wxString l=ps.substr(0,1);
wxString r=ps.substr(2,1);
l.ToLong((long*)&s_Precision.m_lhs);
r.ToLong((long*)&s_Precision.m_rhs);
}
/*****************************************************************/
void WinEDA_PcbFrame::InstallDrillFrame(wxCommandEvent& event)
/*****************************************************************/
/* This function displays and deletes the dialog frame for drill tools
*/
{
wxConfig * Config = m_Parent->m_EDA_Config;
if( Config )
{
Config->Read(ZerosFormatKey, & s_Zeros_Format );
Config->Read(LeftPrecisionKey, & s_Precision.m_lhs );
Config->Read(RightPrecisionKey, & s_Precision.m_rhs );
Config->Read(MirrorKey, &Mirror );
Config->Read(MinimalKey, &Minimal );
Config->Read(UnitDrillInchKey, &Unit_Drill_is_Inch );
Config->Read(DrillOriginIsAuxAxisKey, &DrillOriginIsAuxAxis );
}
WinEDA_DrillFrame * frame = new WinEDA_DrillFrame(this);
frame->ShowModal(); frame->Destroy();
}
/******************************************/
void WinEDA_DrillFrame::UpdateConfig(void)
/******************************************/
/* Save drill options: */
{
SetParams();
wxConfig * Config = m_Parent->m_Parent->m_EDA_Config;
if( Config )
{
Config->Write(ZerosFormatKey, s_Zeros_Format);
Config->Write(LeftPrecisionKey, s_Precision.m_lhs );
Config->Write(RightPrecisionKey, s_Precision.m_rhs );
Config->Write(MirrorKey, Mirror);
Config->Write(MinimalKey, Minimal);
Config->Write(UnitDrillInchKey, Unit_Drill_is_Inch);
Config->Write(DrillOriginIsAuxAxisKey, DrillOriginIsAuxAxis);
}
}
/****************************************************************/
void WinEDA_DrillFrame::OnQuit(wxCommandEvent& WXUNUSED(event))
/****************************************************************/
{
UpdateConfig(); /* Save drill options: */
Close(true); // true is to force the frame to close
}
/*************************************************************/
void WinEDA_DrillFrame::GenDrillFiles(wxCommandEvent& event)
/*************************************************************/
{
wxString FullFileName, Mask(wxT("*")), Ext(wxT(".drl"));
int ii;
wxString msg;
UpdateConfig(); /* set params and Save drill options */
m_Parent->MsgPanel->EraseMsgBox();
/* Calcul des echelles de conversion */
conv_unit = 0.0001; /* unites = INCHES */
if( ! Unit_Drill_is_Inch) conv_unit = 0.000254; /* unites = mm */
/* Init nom fichier */
FullFileName = m_Parent->m_CurrentScreen->m_FileName;
ChangeFileNameExt(FullFileName, Ext);
Mask += Ext;
FullFileName = EDA_FileSelector(_("Drill file"),
wxEmptyString, /* Chemin par defaut */
FullFileName, /* nom fichier par defaut */
Ext, /* extension par defaut */
Mask, /* Masque d'affichage */
this,
wxFD_SAVE,
TRUE
);
if ( FullFileName != wxEmptyString )
{
dest = wxFopen(FullFileName, wxT("w") );
if (dest == 0)
{
msg = _("Unable to create file ") + FullFileName;
DisplayError(this, msg);
EndModal(0);
return ;
}
/* Init : */
Affiche_1_Parametre(m_Parent, 0,_("File"),FullFileName,BLUE) ;
Init_Drill();
ii = Gen_Liste_Forets( (FORET *) adr_lowmem,TRUE);
msg.Printf( wxT("%d"),ii);
Affiche_1_Parametre(m_Parent, 30,_("Tools"), msg, BROWN);
ii = Gen_Drill_File_EXCELLON( (FORET *) adr_lowmem);
msg.Printf( wxT("%d"),ii);
Affiche_1_Parametre(m_Parent, 45,_("Drill"), msg, GREEN);
Fin_Drill();
}
switch ( m_Choice_Drill_Map->GetSelection() )
{
case 0: break;
case 1:
GenDrillMap(PLOT_FORMAT_HPGL);
break;
case 2:
GenDrillMap(PLOT_FORMAT_POST);
break;
}
if ( m_Choice_Drill_Report->GetSelection() > 0 )
GenDrillReport();
EndModal(0);
}
/********************************************************************/
void WinEDA_DrillFrame::UpdatePrecisionOptions(wxCommandEvent& event)
/********************************************************************/
{
if (m_Choice_Unit->GetSelection()==1)
{ /* inch options */
m_Choice_Precision->SetString(0,_("2:3"));
m_Choice_Precision->SetString(1,_("2:4"));
}
else
{ /* metric options */
m_Choice_Precision->SetString(0,_("3:2"));
m_Choice_Precision->SetString(1,_("3:3"));
}
if (m_Choice_Zeros_Format->GetSelection()==DECIMAL_FORMAT)
m_Choice_Precision->Enable(false);
else
m_Choice_Precision->Enable(true);
}
/***************************************************************/
int WinEDA_DrillFrame::Gen_Drill_File_EXCELLON( FORET * buffer)
/***************************************************************/
/* Create the drill file in EXECELLON format
Return hole count
buffer: Drill tools list
*/
{
FORET * foret;
TRACK * pt_piste;
D_PAD * pt_pad;
MODULE * Module;
int ii, diam, nb_trous;
int x0, y0, xf, yf, xc, yc;
float xt,yt;
char line[1024];
/* Create the pad drill list : */
nb_trous = 0;
/* Examen de la liste des forets */
for(ii = 0, foret = buffer; ii < DrillToolsCount; ii++, foret++)
{
sprintf(line,"T%d\n",ii+1); fputs(line,dest);
/* Read the via list */
{
pt_piste = m_Parent->m_Pcb->m_Track;
for( ; pt_piste != NULL; pt_piste = (TRACK*) pt_piste->Pnext)
{
2007-09-01 12:00:30 +00:00
if(pt_piste->Type() != TYPEVIA) continue;
if ( pt_piste->m_Drill == 0 ) continue;
int via_drill = ( pt_piste->m_Drill < 0 ) ? g_DesignSettings.m_ViaDrill : pt_piste->m_Drill;
if ( foret->m_Diameter != via_drill )
continue;
x0 = pt_piste->m_Start.x - File_Drill_Offset.x;
y0 = pt_piste->m_Start.y - File_Drill_Offset.y;
//<ryan's edit>
if (!Mirror) y0 *= -1;
xt = float(x0) * conv_unit; yt = float(y0) * conv_unit;
if(Unit_Drill_is_Inch)
{
Gen_Line_EXCELLON(line, xt, yt);
}
//</ryan's edit>
else
{ /* metric 3:3 */
Gen_Line_EXCELLON(line, xt*10, yt*10);
}
// si les flottants sont ecrits avec , au lieu de .
// conversion , -> . necessaire !
to_point( line );
fputs(line,dest);
nb_trous++;
}
}
/* Read pad list and create Drill infos for round holes only: */
Module = m_Parent->m_Pcb->m_Modules;
for( ; Module != NULL; Module = (MODULE*)Module->Pnext )
{
/* Examen des pastilles */
pt_pad = (D_PAD*) Module->m_Pads;
for ( ; pt_pad != NULL; pt_pad = (D_PAD*)pt_pad->Pnext )
{
if ( pt_pad->m_DrillShape != CIRCLE ) continue;
diam = pt_pad->m_Drill.x;
if ( diam == 0 ) continue;
if(diam != foret->m_Diameter) continue;
/* Compute the hole coordinates: */
x0 = pt_pad->m_Pos.x - File_Drill_Offset.x;
y0 = pt_pad->m_Pos.y - File_Drill_Offset.y;
//<ryan's edit>
if (!Mirror) y0 *= -1;
xt = float(x0) * conv_unit; yt = float(y0) * conv_unit;
if(Unit_Drill_is_Inch)
Gen_Line_EXCELLON(line, xt, yt);
else
Gen_Line_EXCELLON(line, xt*10, yt*10);
to_point( line ); // Internationalization compensation (, to . for floats)
fputs(line,dest);
nb_trous++;
} /* Fin examen 1 module */
} /* Fin 1 passe de foret */
/* Read pad list and create Drill infos for oblong holes only: */
Module = m_Parent->m_Pcb->m_Modules;
for( ; Module != NULL; Module = (MODULE*)Module->Pnext )
{
/* Examen des pastilles */
pt_pad = (D_PAD*) Module->m_Pads;
for ( ; pt_pad != NULL; pt_pad = (D_PAD*)pt_pad->Pnext )
{
if ( pt_pad->m_DrillShape != OVALE ) continue;
diam = MIN( pt_pad->m_Drill.x, pt_pad->m_Drill.y ) ;
if ( diam == 0 ) continue;
if(diam != foret->m_Diameter) continue;
/* Compute the hole coordinates: */
xc = x0 = xf = pt_pad->m_Pos.x - File_Drill_Offset.x;
yc = y0 = yf = pt_pad->m_Pos.y - File_Drill_Offset.y;
/* Compute the start and end coordinates for the shape */
if ( pt_pad->m_Drill.x < pt_pad->m_Drill.y )
{
int delta = (pt_pad->m_Drill.y - pt_pad->m_Drill.x) / 2;
y0 -= delta; yf += delta;
}
else
{
int delta = (pt_pad->m_Drill.x - pt_pad->m_Drill.y) / 2;
x0 -= delta; xf += delta;
}
RotatePoint(&x0, &y0, xc, yc, pt_pad->m_Orient);
RotatePoint(&xf, &yf, xc, yc, pt_pad->m_Orient);
//<ryan's edit>
if (!Mirror) { y0 *= -1; yf *= -1; }
// sprintf(line,"T%d\n",ii+1); fputs(line,dest);
xt = float(x0) * conv_unit; yt = float(y0) * conv_unit;
if(Unit_Drill_is_Inch)
Gen_Line_EXCELLON(line, xt, yt);
else
Gen_Line_EXCELLON(line, xt*10, yt*10);
to_point( line );
/* remove the '\n' from end of line: */
for ( int kk = 0; line[kk] != 0; kk++ )
if ( line[kk] == '\n' || line[kk] =='\r' )
line[kk] = 0;
fputs(line,dest);
fputs("G85",dest);
xt = float(xf) * conv_unit; yt = float(yf) * conv_unit;
if(Unit_Drill_is_Inch)
Gen_Line_EXCELLON(line, xt, yt);
else
Gen_Line_EXCELLON(line, xt*10, yt*10);
to_point( line ); fputs(line,dest);
fputs("G05\n",dest);
nb_trous++;
} /* Fin examen 1 module */
} /* fin analyse des trous de modules pour le foret en cours*/
} /* fin analyse des forets */
return(nb_trous);
}
/**********************************************************************/
void WinEDA_DrillFrame::Gen_Line_EXCELLON(char *line, float x, float y)
/**********************************************************************/
{
wxString xs, ys;
int xpad = s_Precision.m_lhs + s_Precision.m_rhs;
int ypad = xpad;
/* I need to come up with an algorithm that handles any lhs:rhs format.*/
/* one idea is to take more inputs for xpad/ypad when metric is used. */
switch (s_Zeros_Format)
{
default:
case DECIMAL_FORMAT:
sprintf(line,"X%.3fY%.3f\n", x, y);
break;
case SUPPRESS_LEADING: /* that should work now */
for (int i=0;i< s_Precision.m_rhs;i++)
{ x*=10; y*=10; }
sprintf(line,"X%dY%d\n", (int) round(x), (int) round(y) );
break;
case SUPPRESS_TRAILING:
{
for (int i=0;i< s_Precision.m_rhs;i++)
{ x *= 10; y*=10; }
if (x<0)xpad++;
if (y<0)ypad++;
xs.Printf( wxT("%0*d"), xpad, (int) round(x) );
ys.Printf( wxT("%0*d"), ypad, (int) round(y) );
size_t j=xs.Len()-1;
while (xs[j] == '0' && j) xs.Truncate(j--);
j=ys.Len()-1;
while (ys[j] == '0' && j) ys.Truncate(j--);
sprintf(line, "X%sY%s\n", CONV_TO_UTF8(xs), CONV_TO_UTF8(ys));
break;
}
case KEEP_ZEROS:
for (int i=0;i< s_Precision.m_rhs;i++)
{ x *= 10; y*=10; }
if (x<0)xpad++;
if (y<0)ypad++;
xs.Printf( wxT("%0*d"), xpad, (int) round(x) );
ys.Printf( wxT("%0*d"), ypad, (int) round(y) );
sprintf(line, "X%sY%s\n", CONV_TO_UTF8(xs), CONV_TO_UTF8(ys));
break;
};
}
/***************************************************/
/***************************************************/
FORET * GetOrAddForet( FORET * buffer, int diameter)
/***************************************************/
/* Search the drill tool for the diameter "diameter"
Create a new one if not found
*/
{
int ii;
FORET * foret;
if(diameter == 0) return NULL;
/* Search for an existing tool: */
for(ii = 0, foret = buffer ; ii < DrillToolsCount; ii++, foret++)
{
if(foret->m_Diameter == diameter) /* found */
return foret;
}
/* No tool found, we must create a new one */
DrillToolsCount ++;
foret->m_TotalCount = 0;
foret->m_OvalCount = 0;
foret->m_Diameter = diameter;
return foret;
}
/* Sort function by drill value */
int Sort_by_Drill_Value(void * foret1, void * foret2)
{
return( ((FORET*)foret1)->m_Diameter - ((FORET*)foret2)->m_Diameter);
}
/*********************************************************************/
int WinEDA_DrillFrame::Gen_Liste_Forets( FORET * buffer, bool print_header)
/**********************************************************************/
/* Etablit la liste des forets de percage, dans l'ordre croissant des
diametres
Retourne:
Nombre de Forets
Mise a jour: DrillToolsCount = nombre de forets differents
Genere une liste de DrillToolsCount structures FORET a partir de buffer
*/
{
FORET * foret;
D_PAD * pt_pad;
MODULE * Module;
int ii, diam;
char line[1024];
DrillToolsCount = 0; foret = buffer;
/* Create the via tools */
TRACK * pt_piste = m_Parent->m_Pcb->m_Track;
for( ; pt_piste != NULL; pt_piste = (TRACK*) pt_piste->Pnext )
{
2007-09-01 12:00:30 +00:00
if(pt_piste->Type() != TYPEVIA) continue;
if ( pt_piste->m_Drill == 0 ) continue;
int via_drill = g_DesignSettings.m_ViaDrill;
if ( pt_piste->m_Drill > 0 ) // Drill value is not the default value
via_drill = pt_piste->m_Drill;
foret = GetOrAddForet( buffer, via_drill);
if ( foret ) foret->m_TotalCount++;
}
/* Create the pad tools : */
Module = m_Parent->m_Pcb->m_Modules;
for( ; Module != NULL; Module = (MODULE*)Module->Pnext )
{
/* Examen des pastilles */
pt_pad = (D_PAD*) Module->m_Pads;
for ( ; pt_pad != NULL; pt_pad = (D_PAD*)pt_pad->Pnext )
{
if ( pt_pad->m_DrillShape == CIRCLE )
diam = pt_pad->m_Drill.x;
else diam = MIN (pt_pad->m_Drill.x, pt_pad->m_Drill.y);
if(diam == 0) continue;
foret = GetOrAddForet( buffer, diam);
if ( foret )
{
foret->m_TotalCount++;
if ( pt_pad->m_DrillShape == OVALE )foret->m_OvalCount++;
}
} /* Fin examen 1 module */
}
/* tri des forets par ordre de diametre croissant */
qsort(buffer,DrillToolsCount,sizeof(FORET),
(int(*)(const void *, const void * ))Sort_by_Drill_Value);
/* Generation de la section liste des outils */
if (print_header)
{
for(ii = 0, foret = (FORET*) buffer ; ii < DrillToolsCount; ii++, foret++)
{
//<ryan's edit>
if (Unit_Drill_is_Inch) /* does it need T01, T02 or is T1,T2 ok?*/
sprintf(line,"T%dC%.3f\n", ii+1,
float(foret->m_Diameter) * conv_unit);
else
sprintf(line,"T%dC%.3f\n", ii+1,
float(foret->m_Diameter) * conv_unit * 10.0);
//</ryan's edit>
to_point( line );
fputs(line,dest);
}
fputs("%\n",dest);
if (!Minimal) fputs("M47\n",dest); /* Operator message */
fputs("G05\n",dest); /* Drill mode */
/* Units : */
if (Unit_Drill_is_Inch && !Minimal) fputs("M72\n",dest); /* M72 = inch mode */
else if (!Minimal) fputs("M71\n",dest); /* M71 = metric mode */
}
return(DrillToolsCount);
}
/***************************************/
void WinEDA_DrillFrame::Init_Drill(void)
/***************************************/
/* Print the DRILL file header */
{
char Line[256];
fputs("M48\n",dest);
if (!Minimal)
{
DateAndTime(Line);
wxString Title = g_Main_Title + wxT(" ") + GetBuildVersion();
fprintf(dest,";DRILL file {%s} date %s\n",CONV_TO_UTF8(Title),Line);
fputs(";FORMAT={",dest);
fprintf(dest,"%s / absolute / ",
CONV_TO_UTF8(m_Choice_Precision->GetStringSelection()));
fprintf(dest,"%s / ",CONV_TO_UTF8(m_Choice_Unit->GetStringSelection()));
fprintf(dest,"%s}\n",CONV_TO_UTF8(m_Choice_Zeros_Format->GetStringSelection()));
fputs("R,T\nVER,1\nFMAT,2\n",dest);
}
if( Unit_Drill_is_Inch ) fputs("INCH",dest); // Si unites en INCHES
else fputs("METRIC",dest); // Si unites en mm
switch(s_Zeros_Format)
{
case SUPPRESS_LEADING:
case DECIMAL_FORMAT:
fputs(",TZ\n",dest);
break;
case SUPPRESS_TRAILING:
fputs(",LZ\n",dest);
break;
case KEEP_ZEROS:
fputs(",TZ\n",dest); // TZ is acceptable when all zeros are kept
break;
}
if (!Minimal)
fputs("TCST,OFF\nICI,OFF\nATC,ON\n",dest);
}
/************************/
void Fin_Drill(void)
/************************/
{
//add if minimal here
fputs("T0\nM30\n",dest) ; fclose(dest) ;
}
/***********************************************/
void WinEDA_DrillFrame::GenDrillMap(int format)
/***********************************************/
/* Genere le plan de percage (Drill map) format HPGL ou POSTSCRIPT
*/
{
int ii, x, y;
int plotX, plotY, TextWidth;
FORET * foret;
int intervalle = 0, CharSize = 0;
EDA_BaseStruct * PtStruct;
int old_g_PlotOrient = g_PlotOrient;
wxString FullFileName, Mask(wxT("*")), Ext;
char line[1024];
int dX, dY;
wxPoint BoardCentre;
int PlotMarge_in_mils = 400; // Margin in 1/1000 inch
int marge = PlotMarge_in_mils * U_PCB;
wxSize SheetSize;
float fTextScale = 1.0;
double scale_x = 1.0, scale_y = 1.0;
Ki_PageDescr * SheetPS = NULL;
wxString msg;
/* Init extension */
switch( format )
{
case PLOT_FORMAT_HPGL:
Ext = wxT("-drl.plt");
break;
case PLOT_FORMAT_POST:
Ext = wxT("-drl.ps");
break;
default:
DisplayError (this, wxT("WinEDA_DrillFrame::GenDrillMap() error"));
return;
}
/* Init file name */
FullFileName = m_Parent->m_CurrentScreen->m_FileName;
ChangeFileNameExt(FullFileName, Ext);
Mask += Ext;
FullFileName = EDA_FileSelector(_("Drill Map file"),
wxEmptyString, /* Chemin par defaut */
FullFileName, /* nom fichier par defaut */
Ext, /* extension par defaut */
Mask, /* Masque d'affichage */
this,
wxFD_SAVE,
TRUE
);
if ( FullFileName.IsEmpty()) return;
g_PlotOrient = 0;
/* calcul des dimensions et centre du PCB */
m_Parent->m_Pcb->ComputeBoundaryBox();
dX = m_Parent->m_Pcb->m_BoundaryBox.GetWidth();
dY = m_Parent->m_Pcb->m_BoundaryBox.GetHeight();
BoardCentre = m_Parent->m_Pcb->m_BoundaryBox.Centre();
// Calcul de l'echelle du dessin du PCB,
// Echelle 1 en HPGL, dessin sur feuille A4 en PS, + texte description des symboles
switch( format )
{
case PLOT_FORMAT_HPGL: /* Calcul des echelles de conversion format HPGL */
Scale_X = Scale_Y = 1.0;
scale_x = Scale_X * SCALE_HPGL;
scale_y = Scale_Y * SCALE_HPGL;
fTextScale = SCALE_HPGL;
SheetSize = m_Parent->m_CurrentScreen->m_CurrentSheet->m_Size;
SheetSize.x *= U_PCB;
SheetSize.y *= U_PCB;
g_PlotOffset.x = 0;
g_PlotOffset.y = (int)(SheetSize.y * scale_y);
break;
case PLOT_FORMAT_POST:
{
// calcul en unites internes des dimensions de la feuille ( connues en 1/1000 pouce )
SheetPS = &g_Sheet_A4;
SheetSize.x = SheetPS->m_Size.x * U_PCB;
SheetSize.y = SheetPS->m_Size.y * U_PCB;
float Xscale = (float) (SheetSize.x - (marge*2)) / dX;
float Yscale = (float) (SheetSize.y * 0.6 - (marge*2)) / dY;
2007-08-23 04:28:46 +00:00
scale_x = scale_y = MIN(Xscale, Yscale);
g_PlotOffset.x = - (SheetSize.x/2) +
(int)(BoardCentre.x * scale_x) + marge;
g_PlotOffset.y = SheetSize.y/2 +
(int)(BoardCentre.y * scale_y) - marge;
g_PlotOffset.y += SheetSize.y / 8 ; /* decalage pour legende */
break;
}
}
dest = wxFopen(FullFileName, wxT("wt") );
if (dest == 0)
{
msg.Printf( _("Unable to create file <%s>"),FullFileName.GetData()) ;
DisplayError(this, msg); return ;
}
/* Init : */
m_Parent->MsgPanel->EraseMsgBox();
Affiche_1_Parametre(m_Parent, 0,_("File"), FullFileName, BLUE);
/* Calcul de la liste des diametres de percage (liste des forets) */
ii = Gen_Liste_Forets( (FORET *) adr_lowmem, FALSE);
msg.Printf( wxT("%d"),ii);
Affiche_1_Parametre(m_Parent, 48, _("Tools"), msg, BROWN);
switch( format )
{
case PLOT_FORMAT_HPGL:
InitPlotParametresHPGL(g_PlotOffset, scale_x, scale_y);
PrintHeaderHPGL(dest, g_HPGL_Pen_Speed,g_HPGL_Pen_Num);
break;
case PLOT_FORMAT_POST:
{
int BBox[4];
BBox[0] = BBox[1] = PlotMarge_in_mils;
BBox[2] = SheetPS->m_Size.x - PlotMarge_in_mils;
BBox[3] = SheetPS->m_Size.y - PlotMarge_in_mils;
InitPlotParametresPS(g_PlotOffset, SheetPS,
(double) 1.0 / PCB_INTERNAL_UNIT, (double) 1.0 / PCB_INTERNAL_UNIT);
SetDefaultLineWidthPS(10); // Set line with to 10/1000 inch
PrintHeaderPS(dest, wxT("PCBNEW-PS"), FullFileName, 1, BBox, wxLANDSCAPE);
InitPlotParametresPS(g_PlotOffset, SheetPS, scale_x, scale_y);
}
break;
default:
break;
}
/* Trace du contour ( couche EDGE ) */
PtStruct = m_Parent->m_Pcb->m_Drawings;
for( ; PtStruct != NULL; PtStruct = PtStruct->Pnext )
{
2007-09-01 12:00:30 +00:00
switch( PtStruct->Type() )
{
case TYPEDRAWSEGMENT:
PlotDrawSegment( (DRAWSEGMENT*) PtStruct, format, EDGE_LAYER );
break;
case TYPETEXTE:
PlotTextePcb((TEXTE_PCB*) PtStruct, format, EDGE_LAYER);
break;
case TYPECOTATION:
PlotCotation((COTATION*) PtStruct, format, EDGE_LAYER);
break;
case TYPEMIRE:
PlotMirePcb((MIREPCB*) PtStruct, format, EDGE_LAYER);
break;
default:
DisplayError(this, wxT("WinEDA_DrillFrame::GenDrillMap() : Unexpected Draw Type") );
break;
}
}
TextWidth = (int)(50 * scale_x); // Set Drill Symbols width
if( format == PLOT_FORMAT_POST )
{
sprintf( line, "%d setlinewidth\n", TextWidth );
fputs(line,dest);
}
ii = Plot_Drill_PcbMap( (FORET *) adr_lowmem, format);
msg.Printf( wxT("%d"),ii);
Affiche_1_Parametre(m_Parent, 64, _("Drill"), msg,GREEN);
/* Impression de la liste des symboles utilises */
CharSize = 600; /* hauteur des textes en 1/10000 mils */
float CharScale = 1.0;
TextWidth = (int)(50 * CharScale); // Set text width
intervalle = (int)(CharSize * CharScale) + TextWidth;
switch( format)
{
case PLOT_FORMAT_HPGL:
{
/* generation des dim: commande SI x,y; x et y = dim en cm */
char csize[256];
sprintf(csize, "%2.3f", (float)CharSize * CharScale * 0.000254);
to_point(csize);
sprintf(line,"SI %s, %s;\n", csize, csize);
break;
}
case PLOT_FORMAT_POST:
/* Reglage de l'epaisseur de traits des textes */
sprintf( line,"%d setlinewidth\n", TextWidth );
break;
default: *line = 0;
break;
}
fputs(line,dest);
switch( format )
{
default:
case PLOT_FORMAT_POST:
g_PlotOffset.x = 0;
g_PlotOffset.y = 0;
InitPlotParametresPS(g_PlotOffset, SheetPS, scale_x, scale_x);
break;
case PLOT_FORMAT_HPGL:
InitPlotParametresHPGL(g_PlotOffset, scale_x, scale_x);
break;
}
/* Trace des informations */
/* Trace de "Infos" */
plotX = marge + 1000;
plotY = CharSize + 1000;
x = plotX ; y = plotY;
x = +g_PlotOffset.x + (int)(x * fTextScale);
y = g_PlotOffset.y - (int)(y * fTextScale);
switch( format )
{
case PLOT_FORMAT_HPGL:
sprintf(line,"PU %d, %d; LBInfos\03;\n",
x + (int)(intervalle * CharScale * fTextScale),
y - (int)(CharSize / 2 * CharScale * fTextScale) );
fputs(line,dest);
break;
case PLOT_FORMAT_POST:
wxString Text = wxT("Infos");
Plot_1_texte(format, Text, 0, TextWidth,
x, y,
(int) (CharSize * CharScale), (int) (CharSize * CharScale),
FALSE);
break;
}
plotY += (int)( intervalle * 1.2) + 200;
for(ii = 0, foret = (FORET*)adr_lowmem ; ii < DrillToolsCount; ii++, foret++)
{
int plot_diam;
if ( foret->m_TotalCount == 0 ) continue;
plot_diam = (int)(foret->m_Diameter * scale_x);
x = plotX; y = plotY;
x = -g_PlotOffset.x + (int)(x * fTextScale);
y = g_PlotOffset.y - (int)(y * fTextScale);
PlotDrillSymbol(wxPoint(x,y),plot_diam,ii, format);
intervalle = (int)(CharSize * CharScale) + TextWidth;
intervalle = (int)( intervalle * 1.2);
if ( intervalle < (plot_diam + 200 + TextWidth) ) intervalle = plot_diam + 200 + TextWidth;
int rayon = plot_diam/2;
x = plotX + rayon + (int)(CharSize * CharScale); y = plotY;
x = -g_PlotOffset.x + (int)(x * fTextScale);
y = g_PlotOffset.y - (int)(y * fTextScale);
/* Trace de la legende associee */
switch( format )
{
case PLOT_FORMAT_HPGL:
// List the diameter of each drill in the selected Drill Unit,
// and then its diameter in the other Drill Unit.
if ( Unit_Drill_is_Inch )
sprintf( line, "PU %d, %d; LB%2.3f\" / %2.2fmm ",
x + (int)(intervalle * CharScale * fTextScale),
y - (int)(CharSize / 2 * CharScale * fTextScale),
float(foret->m_Diameter) * 0.0001,
float(foret->m_Diameter) * 0.00254 );
else
sprintf( line, "PU %d, %d; LB%2.2fmm / %2.3f\" ",
x + (int)(intervalle * CharScale * fTextScale),
y - (int)(CharSize / 2 * CharScale * fTextScale),
float(foret->m_Diameter) * 0.00254,
float(foret->m_Diameter) * 0.0001 );
fputs( line, dest );
// Now list how many holes and ovals are associated with each drill.
if ( ( foret->m_TotalCount == 1 ) && ( foret->m_OvalCount == 0 ) )
sprintf( line, "(1 hole)\n" );
else if ( foret->m_TotalCount == 1 ) // && ( foret->m_OvalCount == 1 )
sprintf( line, "(1 hole) (with 1 oblong)\n" );
else if ( foret->m_OvalCount == 0 )
sprintf( line, "(%d holes)\n",
foret->m_TotalCount );
else if ( foret->m_OvalCount == 1 )
sprintf( line, "(%d holes) (with 1 oblong)\n",
foret->m_TotalCount );
else // if ( foret->m_OvalCount > 1 )
sprintf( line, "(%d holes) (with %d oblongs)\n",
foret->m_TotalCount,
foret->m_OvalCount );
fputs( line, dest );
fputs("\03;\n",dest);
break;
case PLOT_FORMAT_POST:
// List the diameter of each drill in the selected Drill Unit,
// and then its diameter in the other Drill Unit.
if ( Unit_Drill_is_Inch )
sprintf( line, "%2.3f\" / %2.2fmm ",
float(foret->m_Diameter) * 0.0001,
float(foret->m_Diameter) * 0.00254 );
else
sprintf( line, "%2.2fmm / %2.3f\" ",
float(foret->m_Diameter) * 0.00254,
float(foret->m_Diameter) * 0.0001 );
msg = CONV_FROM_UTF8(line);
// Now list how many holes and ovals are associated with each drill.
if ( ( foret->m_TotalCount == 1 ) && ( foret->m_OvalCount == 0 ) )
sprintf( line, "(1 hole)" );
else if ( foret->m_TotalCount == 1 ) // && ( foret->m_OvalCount == 1 )
sprintf( line, "(1 hole) (with 1 oblong)" );
else if ( foret->m_OvalCount == 0 )
sprintf( line, "(%d holes)",
foret->m_TotalCount );
else if ( foret->m_OvalCount == 1 )
sprintf( line, "(%d holes) (with 1 oblong)",
foret->m_TotalCount );
else // if ( foret->m_OvalCount > 1 )
sprintf( line, "(%d holes) (with %d oblongs)",
foret->m_TotalCount,
foret->m_OvalCount );
msg += CONV_FROM_UTF8(line);
Plot_1_texte(format, msg, 0, TextWidth,
x, y,
(int) (CharSize * CharScale),
(int) (CharSize * CharScale),
FALSE);
break;
}
plotY += intervalle;
}
switch( format )
{
case PLOT_FORMAT_HPGL:
CloseFileHPGL(dest);
break;
case PLOT_FORMAT_POST:
CloseFilePS(dest);
break;
}
g_PlotOrient = old_g_PlotOrient;
}
/********************************************************************/
int WinEDA_DrillFrame::Plot_Drill_PcbMap( FORET * buffer, int format)
/*********************************************************************/
/* Trace la liste des trous a percer en format HPGL ou POSTSCRIPT
Retourne:
Nombre de trous
Utilise:
liste des forets pointee par buffer
*/
{
FORET * foret;
TRACK * pt_piste;
D_PAD * pt_pad;
MODULE * Module;
int ii , diam, nb_trous;
wxPoint pos;
wxSize size;
nb_trous = 0;
/* create the drill list */
if ( DrillToolsCount > 13 )
{
DisplayInfo(this,
_(" Drill map: Too many diameter values to draw to draw one symbol per drill value (max 13)\nPlot uses circle shape for some drill values"), 10);
}
for(ii = 0, foret = (FORET*)buffer ; ii < DrillToolsCount; ii++, foret++)
{
/* create the via drill map */
{
pt_piste = m_Parent->m_Pcb->m_Track;
for( ; pt_piste != NULL; pt_piste = (TRACK*) pt_piste->Pnext)
{
2007-09-01 12:00:30 +00:00
if(pt_piste->Type() != TYPEVIA) continue;
if(pt_piste->m_Drill == 0) continue;
int via_drill = g_DesignSettings.m_ViaDrill;
if (pt_piste->m_Drill >= 0) via_drill = pt_piste->m_Drill;
pos = pt_piste->m_Start;
PlotDrillSymbol(pos, via_drill,ii, format);
nb_trous++;
}
}
/* create the pad drill map: */
for(Module = m_Parent->m_Pcb->m_Modules; Module != NULL; Module = (MODULE*)Module->Pnext)
{
pt_pad = (D_PAD*) Module->m_Pads;
for ( ; pt_pad != NULL; pt_pad = (D_PAD*)pt_pad->Pnext )
{
switch ( pt_pad->m_DrillShape )
{
case CIRCLE:
diam = pt_pad->m_Drill.x;
if(diam != foret->m_Diameter) continue;
PlotDrillSymbol(pt_pad->m_Pos, diam,ii, format);
break;
case OVALE:
if ( pt_pad->m_DrillShape != OVALE ) continue;
diam = MIN( pt_pad->m_Drill.x, pt_pad->m_Drill.y );
if(diam != foret->m_Diameter) continue;
PlotOvalDrillSymbol(pt_pad->m_Pos, pt_pad->m_Drill,pt_pad->m_Orient, format);
break;
}
nb_trous++;
} /* Fin examen 1 module */
} /* Fin 1 passe de foret */
} /* fin analyse des trous de modules */
return(nb_trous);
}
/************************************************************************************/
void PlotDrillSymbol(const wxPoint & position,int diametre,int num_forme, int format)
/************************************************************************************/
/* Trace un motif de numero de forme num_forme, aux coord x0, y0.
x0, y0 = coordonnees tables
diametre = diametre (coord table) du trou
num_forme = index ( permet de gererer des formes caract )
*/
{
int rayon = diametre / 2;
void (*FctPlume)(wxPoint pos, int state);
int x0, y0;
x0 = position.x; y0 = position.y;
FctPlume = Move_Plume_HPGL;
if(format == PLOT_FORMAT_POST) FctPlume = LineTo_PS;
switch( num_forme)
{
case 0: /* vias : forme en X */
FctPlume( wxPoint(x0 - rayon, y0 - rayon), 'U');
FctPlume( wxPoint(x0 + rayon, y0 + rayon), 'D');
FctPlume( wxPoint(x0 + rayon, y0 - rayon), 'U');
FctPlume( wxPoint(x0 - rayon, y0 + rayon), 'D');
break;
case 1: /* Cercle */
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL(wxPoint(x0, y0), diametre, FILAIRE);
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST(wxPoint(x0, y0), diametre, FILAIRE);
break;
case 2: /* forme en + */
FctPlume( wxPoint(x0 , y0 - rayon),'U');
FctPlume( wxPoint(x0 , y0 + rayon),'D');
FctPlume( wxPoint(x0 + rayon, y0), 'U');
FctPlume( wxPoint(x0 - rayon, y0), 'D');
break;
case 3: /* forme en X cercle */
FctPlume( wxPoint(x0 - rayon, y0 - rayon),'U');
FctPlume( wxPoint(x0 + rayon, y0 + rayon),'D');
FctPlume( wxPoint(x0 + rayon, y0 - rayon),'U');
FctPlume( wxPoint(x0 - rayon, y0 + rayon),'D');
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL(wxPoint(x0, y0), diametre, FILAIRE);
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST(wxPoint(x0, y0), diametre, FILAIRE);
break;
case 4: /* forme en cercle barre de - */
FctPlume( wxPoint(x0 - rayon, y0), 'U');
FctPlume( wxPoint(x0 + rayon, y0), 'D');
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL(wxPoint(x0, y0), diametre, FILAIRE);
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST(wxPoint(x0, y0), diametre, FILAIRE);
break;
case 5: /* forme en cercle barre de | */
FctPlume( wxPoint(x0, y0 - rayon),'U');
FctPlume( wxPoint(x0, y0 + rayon),'D');
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL(wxPoint(x0, y0), diametre, FILAIRE);
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST(wxPoint(x0, y0), diametre, FILAIRE);
break;
case 6: /* forme en carre */
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL(wxPoint(x0,y0),wxSize(rayon, rayon),wxSize(0,0), 0, FILAIRE) ;
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST(wxPoint(x0,y0),wxSize(rayon, rayon),wxSize(0,0), 0, FILAIRE) ;
break;
case 7: /* forme en losange */
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL(wxPoint(x0,y0),wxSize(rayon, rayon),wxSize(0,0), 450, FILAIRE) ;
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST(wxPoint(x0,y0),wxSize(rayon, rayon),wxSize(0,0), 450, FILAIRE) ;
break;
case 8: /* forme en carre barre par un X*/
FctPlume( wxPoint(x0 - rayon, y0 - rayon),'U');
FctPlume( wxPoint(x0 + rayon, y0 + rayon),'D');
FctPlume( wxPoint(x0 + rayon, y0 - rayon),'U');
FctPlume( wxPoint(x0 - rayon, y0 + rayon),'D');
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL(wxPoint(x0,y0),wxSize(rayon, rayon),wxSize(0,0), 0, FILAIRE) ;
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST(wxPoint(x0,y0),wxSize(rayon, rayon),wxSize(0,0), 0, FILAIRE) ;
break;
case 9: /* forme en losange barre par un +*/
FctPlume( wxPoint(x0, y0 - rayon),'U');
FctPlume( wxPoint(x0, y0 + rayon),'D');
FctPlume( wxPoint(x0 + rayon, y0), 'U');
FctPlume( wxPoint(x0 - rayon, y0), 'D');
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL(wxPoint(x0,y0),wxSize(rayon, rayon),wxSize(0,0), 450, FILAIRE);
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST(wxPoint(x0,y0),wxSize(rayon, rayon),wxSize(0,0), 450, FILAIRE);
break;
case 10: /* forme en carre barre par un '/' */
FctPlume( wxPoint(x0 - rayon, y0 - rayon),'U');
FctPlume( wxPoint(x0 + rayon, y0 + rayon),'D');
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL(wxPoint(x0,y0),wxSize(rayon, rayon),wxSize(0,0), 0, FILAIRE) ;
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST(wxPoint(x0,y0),wxSize(rayon, rayon),wxSize(0,0), 0, FILAIRE) ;
break;
case 11: /* forme en losange barre par un |*/
FctPlume( wxPoint(x0, y0 - rayon), 'U');
FctPlume( wxPoint(x0, y0 + rayon), 'D');
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL(wxPoint(x0,y0),wxSize(rayon, rayon),wxSize(0,0), 450, FILAIRE) ;
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST(wxPoint(x0,y0),wxSize(rayon, rayon),wxSize(0,0), 450, FILAIRE) ;
break;
case 12: /* forme en losange barre par un -*/
FctPlume( wxPoint(x0 - rayon, y0), 'U');
FctPlume( wxPoint(x0 + rayon, y0), 'D');
if( format == PLOT_FORMAT_HPGL )
trace_1_pad_TRAPEZE_HPGL(wxPoint(x0,y0),wxSize(rayon, rayon),wxSize(0,0), 450, FILAIRE) ;
if( format == PLOT_FORMAT_POST )
trace_1_pad_TRAPEZE_POST(wxPoint(x0,y0),wxSize(rayon, rayon),wxSize(0,0), 450, FILAIRE) ;
break;
default:
if( format == PLOT_FORMAT_HPGL )
trace_1_pastille_RONDE_HPGL(wxPoint(x0, y0), diametre, FILAIRE);
if( format == PLOT_FORMAT_POST )
trace_1_pastille_RONDE_POST(wxPoint(x0, y0), diametre, FILAIRE);
break;
}
if( format == PLOT_FORMAT_HPGL) Plume_HPGL('U');
}
/*******************************************************************************************/
void PlotOvalDrillSymbol(const wxPoint & position,const wxSize & size,int orient,int format)
/*******************************************************************************************/
{
switch( format )
{
case PLOT_FORMAT_HPGL:
trace_1_pastille_OVALE_HPGL(position, size, orient, FILAIRE);
break;
case PLOT_FORMAT_POST:
trace_1_pastille_OVALE_POST(position, size, orient, FILAIRE);
break;
}
}
/*******************************************/
void WinEDA_DrillFrame::GenDrillReport(void)
/*******************************************/
/*
2007-07-18 13:58:21 +00:00
Create a list of drill values and drill count
*/
{
wxString FileName, Mask(wxT("*")), Ext(wxT(".rpt"));
int ii, TotalHoleCount;
char line[1024];
FORET * foret;
wxString msg;
FileName = m_Parent->m_CurrentScreen->m_FileName;
ChangeFileNameExt(FileName, wxT("-drl") + Ext);
Mask += Ext;
FileName = EDA_FileSelector(_("Drill Report file"),
wxEmptyString, /* Chemin par defaut */
FileName, /* nom fichier par defaut */
Ext, /* extension par defaut */
Mask, /* Masque d'affichage */
this,
wxFD_SAVE,
TRUE
);
if ( FileName.IsEmpty()) return;
dest = wxFopen(FileName, wxT("w") );
if (dest == 0)
{
msg = _("Unable to create file ") + FileName;
DisplayError(this, msg);
return ;
}
m_Parent->MsgPanel->EraseMsgBox();
Affiche_1_Parametre( m_Parent, 0, _("File"), FileName, BLUE );
/* Determine the list of the different drill diameters. */
ii = Gen_Liste_Forets( (FORET *) adr_lowmem, FALSE );
msg.Printf( wxT("%d"), ii );
Affiche_1_Parametre( m_Parent, 30, _("Tools"), msg, BROWN );
fprintf(dest, "Drill report for %s\n", CONV_TO_UTF8(m_Parent->m_CurrentScreen->m_FileName) );
fprintf(dest, "Created on %s\n", DateAndTime(line));
// List which Drill Unit option had been selected for the associated drill file.
if ( Unit_Drill_is_Inch )
fputs("Selected Drill Unit: Imperial (\")\n\n", dest);
else
fputs("Selected Drill Unit: Metric (mm)\n\n", dest);
TotalHoleCount = 0;
for ( ii = 0, foret = (FORET*)adr_lowmem ; ii < DrillToolsCount; ii++, foret++ )
{
// List the tool number assigned to each drill,
// then its diameter in the selected Drill Unit,
// and then its diameter in the other Drill Unit.
if ( Unit_Drill_is_Inch )
sprintf( line, "T%d %2.3f\" %2.2fmm ",
ii + 1,
float(foret->m_Diameter) * 0.0001,
float(foret->m_Diameter) * 0.00254 );
else
sprintf( line, "T%d %2.2fmm %2.3f\" ",
ii + 1,
float(foret->m_Diameter) * 0.00254,
float(foret->m_Diameter) * 0.0001 );
fputs( line, dest );
// Now list how many holes and ovals are associated with each drill.
if ( ( foret->m_TotalCount == 1 ) && ( foret->m_OvalCount == 0 ) )
sprintf( line, "(1 hole)\n" );
else if ( foret->m_TotalCount == 1 ) // && ( foret->m_OvalCount == 1 )
sprintf( line, "(1 hole) (with 1 oblong)\n" );
else if ( foret->m_OvalCount == 0 )
sprintf( line, "(%d holes)\n",
foret->m_TotalCount );
else if ( foret->m_OvalCount == 1 )
sprintf( line, "(%d holes) (with 1 oblong)\n",
foret->m_TotalCount );
else // if ( foret->m_OvalCount > 1 )
sprintf( line, "(%d holes) (with %d oblongs)\n",
foret->m_TotalCount,
foret->m_OvalCount );
fputs( line, dest );
TotalHoleCount += foret->m_TotalCount;
}
msg.Printf( wxT("%d"), TotalHoleCount );
Affiche_1_Parametre( m_Parent, 45, _("Drill"), msg, GREEN );
fclose(dest);
}