kicad/pcbnew/dialog_edit_module_for_Boar...

538 lines
18 KiB
C++
Raw Normal View History

2009-08-11 10:27:21 +00:00
/************************************************
* Module editor: Dialog box for editing module
* properties for the Board Editor
************************************************/
#include "fctsys.h"
#include "common.h"
#include "class_drawpanel.h"
#include "confirm.h"
#include "pcbnew.h"
#include "bitmaps.h"
#include "appl_wxstruct.h"
#include "gestfich.h"
#include "3d_struct.h"
#include "3d_viewer.h"
#include "wxPcbStruct.h"
#include "dialog_edit_module_for_BoardEditor.h"
/**************************************************************************************/
DIALOG_MODULE_BOARD_EDITOR::DIALOG_MODULE_BOARD_EDITOR( WinEDA_PcbFrame* aParent,
MODULE* aModule, wxDC* aDC ) :
DIALOG_MODULE_BOARD_EDITOR_BASE( aParent )
/**************************************************************************************/
{
m_Parent = aParent;
m_DC = aDC;
m_CurrentModule = aModule;
SetIcon( wxICON( icon_modedit ) ); // Give an icon
InitModeditProperties();
InitBoardProperties();
GetSizer()->Fit( this );
GetSizer()->SetSizeHints( this );
Centre();
}
DIALOG_MODULE_BOARD_EDITOR::~DIALOG_MODULE_BOARD_EDITOR()
{
for( unsigned ii = 0; ii < m_Shapes3D_list.size(); ii++ )
delete m_Shapes3D_list[ii];
m_Shapes3D_list.clear();
delete m_ReferenceCopy;
delete m_ValueCopy;
delete m_3D_Scale;
delete m_3D_Offset;
delete m_3D_Rotation;
}
/***************************************************************************/
void DIALOG_MODULE_BOARD_EDITOR::InitBoardProperties( )
/***************************************************************************/
/* creation du panel d'edition des proprietes du module
*/
{
PutValueInLocalUnits( *m_ModPositionX, m_CurrentModule->GetPosition().x, PCB_INTERNAL_UNIT );
AddUnitSymbol( *XPositionStatic, g_UnitMetric );
PutValueInLocalUnits( *m_ModPositionY, m_CurrentModule->GetPosition().y, PCB_INTERNAL_UNIT );
AddUnitSymbol( *YPositionStatic, g_UnitMetric );
m_LayerCtrl->SetSelection( (m_CurrentModule->GetLayer() == COPPER_LAYER_N) ? 1 : 0 );
bool select = FALSE;
switch( m_CurrentModule->m_Orient )
{
case 0:
m_OrientCtrl->SetSelection( 0 );
break;
case 900:
case -2700:
m_OrientCtrl->SetSelection( 1 );
break;
case -900:
case 2700:
m_OrientCtrl->SetSelection( 2 );
break;
case -1800:
case 1800:
m_OrientCtrl->SetSelection( 3 );
break;
default:
m_OrientCtrl->SetSelection( 4 );
select = TRUE;
break;
}
wxString msg;
msg << m_CurrentModule->m_Orient;
m_OrientValue->SetValue( msg );
m_OrientValue->Enable( select );
}
/**********************************************************************/
void DIALOG_MODULE_BOARD_EDITOR::OnCancelClick( wxCommandEvent& WXUNUSED (event) )
/**********************************************************************/
{
EndModal( -1 );
}
/************************************************************************/
void DIALOG_MODULE_BOARD_EDITOR::GotoModuleEditor( wxCommandEvent& event )
/************************************************************************/
{
if( m_CurrentModule->m_TimeStamp == 0 ) // Module Editor needs a non null timestamp
{
m_CurrentModule->m_TimeStamp = GetTimeStamp();
m_Parent->GetScreen()->SetModify();
}
EndModal( 2 );
}
/**********************************************************************/
void DIALOG_MODULE_BOARD_EDITOR::ExchangeModule( wxCommandEvent& event )
/**********************************************************************/
{
m_Parent->InstallExchangeModuleFrame( m_CurrentModule );
// Warning: m_CurrentModule was deleted by exchange module
m_Parent->SetCurItem( NULL );
EndModal( 0 );
}
/*************************************************************************/
void DIALOG_MODULE_BOARD_EDITOR::ModuleOrientEvent( wxCommandEvent& event )
/*************************************************************************/
{
switch( m_OrientCtrl->GetSelection() )
{
case 0:
m_OrientValue->Enable( FALSE );
m_OrientValue->SetValue( wxT( "0" ) );
break;
case 1:
m_OrientValue->Enable( FALSE );
m_OrientValue->SetValue( wxT( "900" ) );
break;
case 2:
m_OrientValue->Enable( FALSE );
m_OrientValue->SetValue( wxT( "2700" ) );
break;
case 3:
m_OrientValue->Enable( FALSE );
m_OrientValue->SetValue( wxT( "1800" ) );
break;
default:
m_OrientValue->Enable( FALSE );
m_OrientValue->Enable( TRUE );
break;
}
}
/*******************************************************/
void DIALOG_MODULE_BOARD_EDITOR::InitModeditProperties()
/*******************************************************/
{
SetFocus();
m_LastSelected3DShapeIndex = -1;
/* Init 3D shape list */
S3D_MASTER* draw3D = m_CurrentModule->m_3D_Drawings;
while( draw3D )
{
if( !draw3D->m_Shape3DName.IsEmpty() )
{
S3D_MASTER* draw3DCopy = new S3D_MASTER(NULL);
draw3DCopy->Copy( draw3D );
m_Shapes3D_list.push_back( draw3DCopy );
m_3D_ShapeNameListBox->Append(draw3DCopy->m_Shape3DName);
}
2009-08-11 10:27:21 +00:00
draw3D = (S3D_MASTER*) draw3D->Next();
}
m_ReferenceCopy = new TEXTE_MODULE(NULL);
m_ValueCopy = new TEXTE_MODULE(NULL);
m_ReferenceCopy->Copy(m_CurrentModule->m_Reference);
m_ValueCopy->Copy(m_CurrentModule->m_Value);
m_ReferenceCtrl->SetValue( m_ReferenceCopy->m_Text );
m_ValueCtrl->SetValue( m_ValueCopy->m_Text );
#if wxCHECK_VERSION( 2, 8, 0 )
m_AttributsCtrl->SetItemToolTip( 0, _( "Use this attribute for most non smd components" ) );
m_AttributsCtrl->SetItemToolTip( 1,
_(
"Use this attribute for smd components.\nOnly components with this option are put in the footprint position list file" ) );
m_AttributsCtrl->SetItemToolTip( 2,
_(
"Use this attribute for \"virtual\" components drawn on board (like a old ISA PC bus connector)" ) );
#endif
/* Controls on right side of the dialog */
switch( m_CurrentModule->m_Attributs & 255 )
{
case 0:
m_AttributsCtrl->SetSelection( 0 );
break;
case MOD_CMS:
m_AttributsCtrl->SetSelection( 1 );
break;
case MOD_VIRTUAL:
m_AttributsCtrl->SetSelection( 2 );
break;
default:
m_AttributsCtrl->SetSelection( 0 );
break;
}
m_AutoPlaceCtrl->SetSelection(
(m_CurrentModule->m_ModuleStatus & MODULE_is_LOCKED) ? 1 : 0 );
#if wxCHECK_VERSION( 2, 8, 0 )
m_AutoPlaceCtrl->SetItemToolTip( 0, _( "Enable hotkey move commands and Auto Placement" ) );
m_AutoPlaceCtrl->SetItemToolTip( 1, _( "Disable hotkey move commands and Auto Placement" ) );
#endif
m_CostRot90Ctrl->SetValue( m_CurrentModule->m_CntRot90 );
m_CostRot180Ctrl->SetValue( m_CurrentModule->m_CntRot180 );
// Initialize 3D parameters
wxBoxSizer* BoxSizer = new wxBoxSizer( wxVERTICAL );
m_3D_Scale = new WinEDA_VertexCtrl( m_Panel3D, _( "Shape Scale:" ), BoxSizer, 2, 1 );
m_Sizer3DValues->Add( BoxSizer, 0, wxGROW | wxALL, 5 );
BoxSizer = new wxBoxSizer( wxVERTICAL );
m_3D_Offset = new WinEDA_VertexCtrl( m_Panel3D, _( "Shape Offset:" ), BoxSizer, 2, 1 );
m_Sizer3DValues->Add( BoxSizer, 0, wxGROW | wxALL, 5 );
BoxSizer = new wxBoxSizer( wxVERTICAL );
m_3D_Rotation = new WinEDA_VertexCtrl( m_Panel3D, _( "Shape Rotation:" ), BoxSizer, 2, 1 );
m_Sizer3DValues->Add( BoxSizer, 0, wxGROW | wxALL, 5 );
}
/* Initialize 3D info displayed in dialog box from values in aStruct3DSource
*/
void DIALOG_MODULE_BOARD_EDITOR::Transfert3DValuesToDisplay( S3D_MASTER * aStruct3DSource )
{
if( aStruct3DSource )
{
m_3D_Scale->SetValue( aStruct3DSource->m_MatScale );
m_3D_Offset->SetValue( aStruct3DSource->m_MatPosition );
m_3D_Rotation->SetValue( aStruct3DSource->m_MatRotation );
}
else
{
S3D_Vertex dummy_vertex;
dummy_vertex.x = dummy_vertex.y = dummy_vertex.z = 1.0;
m_3D_Scale->SetValue( dummy_vertex );
}
}
/** Copy 3D info displayed in dialog box to values in a item in m_Shapes3D_list
* @param aIndexSelection = item index in m_Shapes3D_list
*/
void DIALOG_MODULE_BOARD_EDITOR::TransfertDisplayTo3DValues( int aIndexSelection )
{
if( aIndexSelection >= (int)m_Shapes3D_list.size() )
return;
S3D_MASTER * struct3DDest = m_Shapes3D_list[aIndexSelection];
struct3DDest->m_MatScale = m_3D_Scale->GetValue();
struct3DDest->m_MatRotation = m_3D_Rotation->GetValue();
struct3DDest->m_MatPosition = m_3D_Offset->GetValue();
}
/***********************************************************/
void DIALOG_MODULE_BOARD_EDITOR::On3DShapeNameSelected(wxCommandEvent& event)
/***********************************************************/
{
if( m_LastSelected3DShapeIndex >= 0 )
TransfertDisplayTo3DValues( m_LastSelected3DShapeIndex );
m_LastSelected3DShapeIndex = m_3D_ShapeNameListBox->GetSelection();
if( m_LastSelected3DShapeIndex < 0 ) // happens under wxGTK when deleting an item in m_3D_ShapeNameListBox wxListBox
return;
if( m_LastSelected3DShapeIndex >= (int) m_Shapes3D_list.size() )
{
wxMessageBox(wxT("On3DShapeNameSelected() error"));
m_LastSelected3DShapeIndex = -1;
return;
}
2009-08-11 10:27:21 +00:00
Transfert3DValuesToDisplay( m_Shapes3D_list[m_LastSelected3DShapeIndex] );
}
/***********************************************************/
void DIALOG_MODULE_BOARD_EDITOR::Add3DShape(wxCommandEvent& event)
/***********************************************************/
{
Browse3DLib( event );
}
/***********************************************************/
void DIALOG_MODULE_BOARD_EDITOR::Remove3DShape(wxCommandEvent& event)
/***********************************************************/
{
if( m_LastSelected3DShapeIndex >= 0 )
TransfertDisplayTo3DValues( m_LastSelected3DShapeIndex );
int ii = m_3D_ShapeNameListBox->GetSelection();
if( ii < 0 )
return;
m_Shapes3D_list.erase(m_Shapes3D_list.begin() + ii );
m_3D_ShapeNameListBox->Delete(ii);
if( m_3D_ShapeNameListBox->GetCount() == 0)
Transfert3DValuesToDisplay( NULL );
else
{
m_LastSelected3DShapeIndex = 0;
m_3D_ShapeNameListBox->SetSelection(m_LastSelected3DShapeIndex);
Transfert3DValuesToDisplay( m_Shapes3D_list[m_LastSelected3DShapeIndex] );
}
}
/*********************************************************************/
void DIALOG_MODULE_BOARD_EDITOR::Browse3DLib( wxCommandEvent& event )
/*********************************************************************/
{
wxString fullfilename, shortfilename;
wxString fullpath;
wxString mask = wxT( "*" );
fullpath = wxGetApp().ReturnLastVisitedLibraryPath( LIB3D_PATH );
mask += g_Shapes3DExtBuffer;
#ifdef __WINDOWS__
fullpath.Replace( wxT( "/" ), wxT( "\\" ) );
#endif
fullfilename = EDA_FileSelector( _( "3D Shape:" ),
fullpath, /* Chemin par defaut */
wxEmptyString, /* nom fichier par defaut */
g_Shapes3DExtBuffer, /* extension par defaut */
mask, /* Masque d'affichage */
this,
wxFD_OPEN,
TRUE
);
if( fullfilename == wxEmptyString )
return;
wxFileName fn = fullfilename;
wxGetApp().SaveLastVisitedLibraryPath( fn.GetPath() );
/* If the file path is already in the library search paths
* list, just add the library name to the list. Otherwise, add
* the library name with the full or relative path.
* the relative path, when possible is preferable,
* because it preserve use of default libraries paths, when the path is a sub path of these default paths
*/
shortfilename = wxGetApp().ReturnFilenameWithRelativePathInLibPath( fullfilename );
S3D_MASTER* new3DShape = new S3D_MASTER(NULL);
new3DShape->m_Shape3DName = shortfilename;
m_Shapes3D_list.push_back( new3DShape );
m_3D_ShapeNameListBox->Append( shortfilename );
if( m_LastSelected3DShapeIndex >= 0 )
TransfertDisplayTo3DValues( m_LastSelected3DShapeIndex );
m_LastSelected3DShapeIndex = m_3D_ShapeNameListBox->GetCount() - 1;
m_3D_ShapeNameListBox->SetSelection(m_LastSelected3DShapeIndex);
Transfert3DValuesToDisplay( m_Shapes3D_list[m_LastSelected3DShapeIndex] );
}
/******************************************************************************/
void DIALOG_MODULE_BOARD_EDITOR::OnOkClick( wxCommandEvent& event )
/******************************************************************************/
{
bool change_layer = FALSE;
wxPoint modpos;
if( m_CurrentModule->m_Flags == 0 ) // this is a simple edition, we must create an undo entry
m_Parent->SaveCopyInUndoList( m_CurrentModule, UR_CHANGED );
if( m_DC )
{
m_Parent->DrawPanel->CursorOff( m_DC );
m_CurrentModule->Draw( m_Parent->DrawPanel, m_DC, GR_XOR );
}
// Set Module Position
modpos.x = ReturnValueFromTextCtrl( *m_ModPositionX, PCB_INTERNAL_UNIT );
modpos.y = ReturnValueFromTextCtrl( *m_ModPositionY, PCB_INTERNAL_UNIT );
m_CurrentModule->SetPosition(modpos);
// Set orienta tion
long orient = 0;
wxString msg = m_OrientValue->GetValue();
msg.ToLong( &orient );
if( m_CurrentModule->m_Orient != orient )
m_CurrentModule->Rotate( m_CurrentModule->m_Pos, orient - m_CurrentModule->m_Orient );
if( m_LayerCtrl->GetSelection() == 0 ) // layer req = COMPONENT
{
if( m_CurrentModule->GetLayer() == COPPER_LAYER_N )
change_layer = TRUE;
}
else if( m_CurrentModule->GetLayer() == CMP_N )
change_layer = TRUE;
if( change_layer )
m_CurrentModule->Flip(m_CurrentModule->m_Pos);
if( m_AutoPlaceCtrl->GetSelection() == 1 )
m_CurrentModule->m_ModuleStatus |= MODULE_is_LOCKED;
else
m_CurrentModule->m_ModuleStatus &= ~MODULE_is_LOCKED;
switch( m_AttributsCtrl->GetSelection() )
{
case 0:
m_CurrentModule->m_Attributs = 0;
break;
case 1:
m_CurrentModule->m_Attributs = MOD_CMS;
break;
case 2:
m_CurrentModule->m_Attributs = MOD_VIRTUAL;
break;
}
m_CurrentModule->m_CntRot90 = m_CostRot90Ctrl->GetValue();
m_CurrentModule->m_CntRot180 = m_CostRot180Ctrl->GetValue();
// Init Fields:
m_CurrentModule->m_Reference->Copy(m_ReferenceCopy );
m_CurrentModule->m_Value->Copy(m_ValueCopy );
/* Update 3D shape list */
int ii = m_3D_ShapeNameListBox->GetSelection();
if ( ii >= 0 )
TransfertDisplayTo3DValues( ii );
S3D_MASTER* draw3D = m_CurrentModule->m_3D_Drawings;
for( unsigned ii = 0; ii < m_Shapes3D_list.size(); ii++ )
{
S3D_MASTER* draw3DCopy = m_Shapes3D_list[ii];
if( draw3DCopy->m_Shape3DName.IsEmpty() )
continue;
if( draw3D == NULL )
{
draw3D = new S3D_MASTER( draw3D );
m_CurrentModule->m_3D_Drawings.Append( draw3D );
}
draw3D->m_Shape3DName = draw3DCopy->m_Shape3DName;
draw3D->m_MatScale = draw3DCopy->m_MatScale;
draw3D->m_MatRotation = draw3DCopy->m_MatRotation;
draw3D->m_MatPosition = draw3DCopy->m_MatPosition;
draw3D = draw3D->Next();
}
// Remove old extra 3D shapes
S3D_MASTER* nextdraw3D;
for( ; draw3D != NULL; draw3D = nextdraw3D )
{
nextdraw3D = (S3D_MASTER*) draw3D->Next();
delete m_CurrentModule->m_3D_Drawings.Remove( draw3D );
}
// Fill shape list with one void entry, if no entry
if( m_CurrentModule->m_3D_Drawings == NULL )
m_CurrentModule->m_3D_Drawings.PushBack( new S3D_MASTER( m_CurrentModule ) );
m_CurrentModule->Set_Rectangle_Encadrement();
m_Parent->GetScreen()->SetModify();
EndModal( 1 );
if( m_DC )
{
m_CurrentModule->Draw( m_Parent->DrawPanel, m_DC, GR_OR );
m_Parent->DrawPanel->CursorOn( m_DC );
}
}
/***********************************************************************/
void DIALOG_MODULE_BOARD_EDITOR::OnEditReference(wxCommandEvent& event)
/***********************************************************************/
{
wxPoint tmp = m_Parent->GetScreen()->m_Curseur;
m_Parent->GetScreen()->m_Curseur = m_ReferenceCopy->m_Pos;
m_ReferenceCopy->SetParent(m_CurrentModule);
m_Parent->InstallTextModOptionsFrame( m_ReferenceCopy, NULL );
m_Parent->GetScreen()->m_Curseur = tmp;
m_ReferenceCtrl->SetValue(m_ReferenceCopy->m_Text);
}
/***********************************************************/
void DIALOG_MODULE_BOARD_EDITOR::OnEditValue(wxCommandEvent& event)
/***********************************************************/
{
wxPoint tmp = m_Parent->GetScreen()->m_Curseur;
m_Parent->GetScreen()->m_Curseur = m_ValueCopy->m_Pos;
m_ValueCopy->SetParent(m_CurrentModule);
m_Parent->InstallTextModOptionsFrame( m_ValueCopy, NULL );
m_Parent->GetScreen()->m_Curseur = tmp;
m_ValueCtrl->SetValue(m_ValueCopy->m_Text);
}