kicad/pcbnew/exporters/gendrill_file_writer_base.cpp

/*
 * This program source code file is part of KiCad, a free EDA CAD application.
 *
 * Copyright (C) 2017 Jean_Pierre Charras <jp.charras at wanadoo.fr>
 * Copyright (C) 2015 SoftPLC Corporation, Dick Hollenbeck <dick@softplc.com>
 * Copyright (C) 1992-2017 KiCad Developers, see change_log.txt for contributors.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, you may find one here:
 * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
 * or you may search the http://www.gnu.org website for the version 2 license,
 * or you may write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
 */
#include <fctsys.h>

#include <class_board.h>
#include <class_module.h>
#include <collectors.h>
#include <reporter.h>

#include <gendrill_file_writer_base.h>


/* Helper function for sorting hole list.
 * Compare function used for sorting holes type type (plated then not plated)
 * then by increasing diameter value and X value
 */
static bool CmpHoleSorting( const HOLE_INFO& a, const HOLE_INFO& b )
{
    if( a.m_Hole_NotPlated != b.m_Hole_NotPlated )
        return b.m_Hole_NotPlated;

    if( a.m_Hole_Diameter != b.m_Hole_Diameter )
        return a.m_Hole_Diameter < b.m_Hole_Diameter;

    // group by components when possible
    const D_PAD* pada = dyn_cast<const D_PAD*>( a.m_ItemParent );
    const D_PAD* padb = dyn_cast<const D_PAD*>( b.m_ItemParent );

    if( pada && padb )
    {
        // cmp == 0 means the pads have the same parent, therfore the same reference
        int cmp = pada->GetParent() - padb->GetParent();

        if( cmp )
            return cmp < 0;
    }
    else if( pada || padb )     // in this case, other item is a via. Sort via first
    {
        return padb != nullptr;
    }

    // At this point, sort by position, as last sort criteria
    if( a.m_Hole_Pos.x != b.m_Hole_Pos.x )
        return a.m_Hole_Pos.x < b.m_Hole_Pos.x;

    return a.m_Hole_Pos.y < b.m_Hole_Pos.y;
}


void GENDRILL_WRITER_BASE::buildHolesList( DRILL_LAYER_PAIR aLayerPair,
                                           bool aGenerateNPTH_list )
{
    HOLE_INFO new_hole;

    m_holeListBuffer.clear();
    m_toolListBuffer.clear();

    wxASSERT( aLayerPair.first < aLayerPair.second );  // fix the caller

    // build hole list for vias
    if( ! aGenerateNPTH_list )  // vias are always plated !
    {
        for( VIA* via = GetFirstVia( m_pcb->m_Track ); via; via = GetFirstVia( via->Next() ) )
        {
            int hole_sz = via->GetDrillValue();

            if( hole_sz == 0 )   // Should not occur.
                continue;

            new_hole.m_ItemParent = via;
            new_hole.m_Tool_Reference = -1;         // Flag value for Not initialized
            new_hole.m_Hole_Orient    = 0;
            new_hole.m_Hole_Diameter  = hole_sz;
            new_hole.m_Hole_NotPlated = false;
            new_hole.m_Hole_Size.x = new_hole.m_Hole_Size.y = new_hole.m_Hole_Diameter;

            new_hole.m_Hole_Shape = 0;              // hole shape: round
            new_hole.m_Hole_Pos = via->GetStart();

            via->LayerPair( &new_hole.m_Hole_Top_Layer, &new_hole.m_Hole_Bottom_Layer );

            // LayerPair() returns params with m_Hole_Bottom_Layer > m_Hole_Top_Layer
            // Remember: top layer = 0 and bottom layer = 31 for through hole vias
            // Any captured via should be from aLayerPair.first to aLayerPair.second exactly.
            if( new_hole.m_Hole_Top_Layer    != aLayerPair.first ||
                new_hole.m_Hole_Bottom_Layer != aLayerPair.second )
                continue;

            m_holeListBuffer.push_back( new_hole );
        }
    }

    if( aLayerPair == DRILL_LAYER_PAIR( F_Cu, B_Cu ) )
    {
        // add holes for thru hole pads
        for( MODULE* module = m_pcb->m_Modules;  module;  module = module->Next() )
        {
            for( auto& pad : module->Pads() )
            {
                if( !m_merge_PTH_NPTH )
                {
                    if( !aGenerateNPTH_list && pad->GetAttribute() == PAD_ATTRIB_HOLE_NOT_PLATED )
                        continue;

                    if( aGenerateNPTH_list && pad->GetAttribute() != PAD_ATTRIB_HOLE_NOT_PLATED )
                        continue;
                }

                if( pad->GetDrillSize().x == 0 )
                    continue;

                new_hole.m_ItemParent     = pad;
                new_hole.m_Hole_NotPlated = (pad->GetAttribute() == PAD_ATTRIB_HOLE_NOT_PLATED);
                new_hole.m_Tool_Reference = -1;         // Flag is: Not initialized
                new_hole.m_Hole_Orient    = pad->GetOrientation();
                new_hole.m_Hole_Shape     = 0;           // hole shape: round
                new_hole.m_Hole_Diameter  = std::min( pad->GetDrillSize().x, pad->GetDrillSize().y );
                new_hole.m_Hole_Size.x    = new_hole.m_Hole_Size.y = new_hole.m_Hole_Diameter;

                if( pad->GetDrillShape() != PAD_DRILL_SHAPE_CIRCLE )
                    new_hole.m_Hole_Shape = 1; // oval flag set

                new_hole.m_Hole_Size         = pad->GetDrillSize();
                new_hole.m_Hole_Pos          = pad->GetPosition();  // hole position
                new_hole.m_Hole_Bottom_Layer = B_Cu;
                new_hole.m_Hole_Top_Layer    = F_Cu;    // pad holes are through holes
                m_holeListBuffer.push_back( new_hole );
            }
        }
    }

    // Sort holes per increasing diameter value
    sort( m_holeListBuffer.begin(), m_holeListBuffer.end(), CmpHoleSorting );

    // build the tool list
    int last_hole = -1;     // Set to not initialized (this is a value not used
                            // for m_holeListBuffer[ii].m_Hole_Diameter)
    bool last_notplated_opt = false;

    DRILL_TOOL new_tool( 0, false );
    unsigned   jj;

    for( unsigned ii = 0; ii < m_holeListBuffer.size(); ii++ )
    {
        if( m_holeListBuffer[ii].m_Hole_Diameter != last_hole ||
            m_holeListBuffer[ii].m_Hole_NotPlated != last_notplated_opt )
        {
            new_tool.m_Diameter = m_holeListBuffer[ii].m_Hole_Diameter;
            new_tool.m_Hole_NotPlated = m_holeListBuffer[ii].m_Hole_NotPlated;
            m_toolListBuffer.push_back( new_tool );
            last_hole = new_tool.m_Diameter;
            last_notplated_opt = new_tool.m_Hole_NotPlated;
        }

        jj = m_toolListBuffer.size();

        if( jj == 0 )
            continue;                                        // Should not occurs

        m_holeListBuffer[ii].m_Tool_Reference = jj;          // Tool value Initialized (value >= 1)

        m_toolListBuffer.back().m_TotalCount++;

        if( m_holeListBuffer[ii].m_Hole_Shape )
            m_toolListBuffer.back().m_OvalCount++;
    }
}


std::vector<DRILL_LAYER_PAIR> GENDRILL_WRITER_BASE::getUniqueLayerPairs() const
{
    wxASSERT( m_pcb );

    static const KICAD_T interesting_stuff_to_collect[] = {
        PCB_VIA_T,
        EOT
    };

    PCB_TYPE_COLLECTOR  vias;

    vias.Collect( m_pcb, interesting_stuff_to_collect );

    std::set< DRILL_LAYER_PAIR >  unique;

    DRILL_LAYER_PAIR  layer_pair;

    for( int i = 0; i < vias.GetCount(); ++i )
    {
        VIA*  v = (VIA*) vias[i];

        v->LayerPair( &layer_pair.first, &layer_pair.second );

        // only make note of blind buried.
        // thru hole is placed unconditionally as first in fetched list.
        if( layer_pair != DRILL_LAYER_PAIR( F_Cu, B_Cu ) )
        {
            unique.insert( layer_pair );
        }
    }

    std::vector<DRILL_LAYER_PAIR>    ret;

    ret.push_back( DRILL_LAYER_PAIR( F_Cu, B_Cu ) );      // always first in returned list

    for( std::set< DRILL_LAYER_PAIR >::const_iterator it = unique.begin();  it != unique.end(); ++it )
        ret.push_back( *it );

    return ret;
}


const std::string GENDRILL_WRITER_BASE::layerName( PCB_LAYER_ID aLayer ) const
{
    // Generic names here.
    switch( aLayer )
    {
    case F_Cu:
        return "front";
    case B_Cu:
        return "back";
    default:
        return StrPrintf( "in%d", aLayer );
    }
}


const std::string GENDRILL_WRITER_BASE::layerPairName( DRILL_LAYER_PAIR aPair ) const
{
    std::string ret = layerName( aPair.first );
    ret += '-';
    ret += layerName( aPair.second );

    return ret;
}


const wxString GENDRILL_WRITER_BASE::getDrillFileName( DRILL_LAYER_PAIR aPair, bool aNPTH,
                                               bool aMerge_PTH_NPTH ) const
{
    wxASSERT( m_pcb );

    wxString    extend;

    if( aNPTH )
        extend = "-NPTH";
    else if( aPair == DRILL_LAYER_PAIR( F_Cu, B_Cu ) )
    {
        if( !aMerge_PTH_NPTH )
            extend = "-PTH";
        // if merged, extend with nothing
    }
    else
    {
        extend += '-';
        extend += layerPairName( aPair );
    }

    wxFileName  fn = m_pcb->GetFileName();

    fn.SetName( fn.GetName() + extend );
    fn.SetExt( m_drillFileExtension );

    wxString ret = fn.GetFullName();

    return ret;
}

void GENDRILL_WRITER_BASE::CreateMapFilesSet( const wxString& aPlotDirectory,
                                              REPORTER * aReporter )
{
    wxFileName  fn;
    wxString    msg;

    std::vector<DRILL_LAYER_PAIR> hole_sets = getUniqueLayerPairs();

    // append a pair representing the NPTH set of holes, for separate drill files.
    if( !m_merge_PTH_NPTH )
        hole_sets.push_back( DRILL_LAYER_PAIR( F_Cu, B_Cu ) );

    for( std::vector<DRILL_LAYER_PAIR>::const_iterator it = hole_sets.begin();
         it != hole_sets.end();  ++it )
    {
        DRILL_LAYER_PAIR  pair = *it;
        // For separate drill files, the last layer pair is the NPTH drill file.
        bool doing_npth = m_merge_PTH_NPTH ? false : ( it == hole_sets.end() - 1 );

        buildHolesList( pair, doing_npth );

        // The file is created if it has holes, or if it is the non plated drill file
        // to be sure the NPTH file is up to date in separate files mode.
        if( getHolesCount() > 0 || doing_npth )
        {
            fn = getDrillFileName( pair, doing_npth, m_merge_PTH_NPTH );
            fn.SetPath( aPlotDirectory );

            fn.SetExt( wxEmptyString ); // Will be added by GenDrillMap
            wxString fullfilename = fn.GetFullPath() + wxT( "-drl_map" );
            fullfilename << wxT(".") << GetDefaultPlotExtension( m_mapFileFmt );

            bool success = genDrillMapFile( fullfilename, m_mapFileFmt );

            if( ! success )
            {
                if( aReporter )
                {
                    msg.Printf( _( "** Unable to create %s **\n" ), GetChars( fullfilename ) );
                    aReporter->Report( msg );
                }

                return;
            }
            else
            {
                if( aReporter )
                {
                    msg.Printf( _( "Create file %s\n" ), GetChars( fullfilename ) );
                    aReporter->Report( msg );
                }
            }
        }
    }
}