kicad/pcbnew/autorouter/ar_matrix.cpp

1327 lines
35 KiB
C++
Raw Normal View History

/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 2012 Jean-Pierre Charras, jean-pierre.charras@ujf-grenoble.fr
* Copyright (C) 2012 SoftPLC Corporation, Dick Hollenbeck <dick@softplc.com>
* Copyright (C) 2011 Wayne Stambaugh <stambaughw@verizon.net>
*
2015-02-22 21:25:29 +00:00
* Copyright (C) 1992-2015 KiCad Developers, see change_log.txt for contributors.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include "ar_matrix.h"
#include "ar_cell.h"
#include <common.h>
#include <math/util.h> // for KiROUND
#include <math_for_graphics.h>
#include <trigo.h>
#include <class_drawsegment.h>
#include <class_pad.h>
#include <class_track.h>
2007-08-21 14:34:54 +00:00
AR_MATRIX::AR_MATRIX()
{
m_BoardSide[0] = nullptr;
m_BoardSide[1] = nullptr;
m_DistSide[0] = nullptr;
m_DistSide[1] = nullptr;
m_DirSide[0] = nullptr;
m_DirSide[1] = nullptr;
m_opWriteCell = nullptr;
m_InitMatrixDone = false;
m_Nrows = 0;
m_Ncols = 0;
m_MemSize = 0;
m_RoutingLayersCount = 1;
m_GridRouting = 0;
m_RouteCount = 0;
m_routeLayerBottom = B_Cu;
m_routeLayerTop = F_Cu;
}
AR_MATRIX::~AR_MATRIX()
{
}
// was: bool AR_MATRIX::ComputeMatrixSize( BOARD* aPcb, bool aUseBoardEdgesOnly )
// aUseBoardEdgesOnly ? aPcb->GetBoardEdgesBoundingBox() : aPcb->GetBoundingBox();
bool AR_MATRIX::ComputeMatrixSize( const EDA_RECT& aBoundingBox )
{
++PCBNew * Removed Pcb_Frame argument from BOARD() constructor, since it precludes having a BOARD being edited by more than one editor, it was a bad design. And this meant removing m_PcbFrame from BOARD. * removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame * Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp * added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance * a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed, such as dialog_mask_clearance, dialog_drc, etc. * Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it with build_version.h's #define BOARD_FILE_VERSION, although there may be a better place for this constant. * Made the public functions in PARAM_CFG_ARRAY be type const. void SaveParam(..) const and void ReadParam(..) const * PARAM_CFG_BASE now has virtual destructor since we have various way of destroying the derived class and boost::ptr_vector must be told about this. * Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use an automatic PARAM_CFG_ARRAY which is on the stack.\ * PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array, since it has to access the current BOARD and the BOARD can change. Remember BOARD_DESIGN_SETTINGS are now in the BOARD. * Made the m_BoundingBox member private, this was a brutally hard task, and indicative of the lack of commitment to accessors and object oriented design on the part of KiCad developers. We must do better. Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox(). * Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
2011-12-05 06:15:33 +00:00
// The boundary box must have its start point on routing grid:
m_BrdBox = aBoundingBox;
m_BrdBox.SetX( m_BrdBox.GetX() - ( m_BrdBox.GetX() % m_GridRouting ) );
m_BrdBox.SetY( m_BrdBox.GetY() - ( m_BrdBox.GetY() % m_GridRouting ) );
++PCBNew * Removed Pcb_Frame argument from BOARD() constructor, since it precludes having a BOARD being edited by more than one editor, it was a bad design. And this meant removing m_PcbFrame from BOARD. * removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame * Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp * added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance * a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed, such as dialog_mask_clearance, dialog_drc, etc. * Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it with build_version.h's #define BOARD_FILE_VERSION, although there may be a better place for this constant. * Made the public functions in PARAM_CFG_ARRAY be type const. void SaveParam(..) const and void ReadParam(..) const * PARAM_CFG_BASE now has virtual destructor since we have various way of destroying the derived class and boost::ptr_vector must be told about this. * Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use an automatic PARAM_CFG_ARRAY which is on the stack.\ * PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array, since it has to access the current BOARD and the BOARD can change. Remember BOARD_DESIGN_SETTINGS are now in the BOARD. * Made the m_BoundingBox member private, this was a brutally hard task, and indicative of the lack of commitment to accessors and object oriented design on the part of KiCad developers. We must do better. Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox(). * Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
2011-12-05 06:15:33 +00:00
// The boundary box must have its end point on routing grid:
wxPoint end = m_BrdBox.GetEnd();
++PCBNew * Removed Pcb_Frame argument from BOARD() constructor, since it precludes having a BOARD being edited by more than one editor, it was a bad design. And this meant removing m_PcbFrame from BOARD. * removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame * Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp * added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance * a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed, such as dialog_mask_clearance, dialog_drc, etc. * Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it with build_version.h's #define BOARD_FILE_VERSION, although there may be a better place for this constant. * Made the public functions in PARAM_CFG_ARRAY be type const. void SaveParam(..) const and void ReadParam(..) const * PARAM_CFG_BASE now has virtual destructor since we have various way of destroying the derived class and boost::ptr_vector must be told about this. * Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use an automatic PARAM_CFG_ARRAY which is on the stack.\ * PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array, since it has to access the current BOARD and the BOARD can change. Remember BOARD_DESIGN_SETTINGS are now in the BOARD. * Made the m_BoundingBox member private, this was a brutally hard task, and indicative of the lack of commitment to accessors and object oriented design on the part of KiCad developers. We must do better. Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox(). * Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
2011-12-05 06:15:33 +00:00
end.x -= end.x % m_GridRouting;
end.x += m_GridRouting;
++PCBNew * Removed Pcb_Frame argument from BOARD() constructor, since it precludes having a BOARD being edited by more than one editor, it was a bad design. And this meant removing m_PcbFrame from BOARD. * removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame * Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp * added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance * a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed, such as dialog_mask_clearance, dialog_drc, etc. * Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it with build_version.h's #define BOARD_FILE_VERSION, although there may be a better place for this constant. * Made the public functions in PARAM_CFG_ARRAY be type const. void SaveParam(..) const and void ReadParam(..) const * PARAM_CFG_BASE now has virtual destructor since we have various way of destroying the derived class and boost::ptr_vector must be told about this. * Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use an automatic PARAM_CFG_ARRAY which is on the stack.\ * PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array, since it has to access the current BOARD and the BOARD can change. Remember BOARD_DESIGN_SETTINGS are now in the BOARD. * Made the m_BoundingBox member private, this was a brutally hard task, and indicative of the lack of commitment to accessors and object oriented design on the part of KiCad developers. We must do better. Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox(). * Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
2011-12-05 06:15:33 +00:00
end.y -= end.y % m_GridRouting;
end.y += m_GridRouting;
++PCBNew * Removed Pcb_Frame argument from BOARD() constructor, since it precludes having a BOARD being edited by more than one editor, it was a bad design. And this meant removing m_PcbFrame from BOARD. * removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame * Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp * added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance * a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed, such as dialog_mask_clearance, dialog_drc, etc. * Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it with build_version.h's #define BOARD_FILE_VERSION, although there may be a better place for this constant. * Made the public functions in PARAM_CFG_ARRAY be type const. void SaveParam(..) const and void ReadParam(..) const * PARAM_CFG_BASE now has virtual destructor since we have various way of destroying the derived class and boost::ptr_vector must be told about this. * Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use an automatic PARAM_CFG_ARRAY which is on the stack.\ * PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array, since it has to access the current BOARD and the BOARD can change. Remember BOARD_DESIGN_SETTINGS are now in the BOARD. * Made the m_BoundingBox member private, this was a brutally hard task, and indicative of the lack of commitment to accessors and object oriented design on the part of KiCad developers. We must do better. Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox(). * Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
2011-12-05 06:15:33 +00:00
m_BrdBox.SetEnd( end );
m_Nrows = m_BrdBox.GetHeight() / m_GridRouting;
m_Ncols = m_BrdBox.GetWidth() / m_GridRouting;
2011-03-09 14:30:39 +00:00
// gives a small margin
m_Ncols += 1;
m_Nrows += 1;
2007-08-21 14:34:54 +00:00
2011-03-09 14:30:39 +00:00
return true;
}
int AR_MATRIX::InitRoutingMatrix()
{
if( m_Nrows <= 0 || m_Ncols <= 0 )
2007-08-21 14:34:54 +00:00
return 0;
m_InitMatrixDone = true; // we have been called
// give a small margin for memory allocation:
int ii = ( m_Nrows + 1 ) * ( m_Ncols + 1 );
int side = AR_SIDE_BOTTOM;
for( int jj = 0; jj < m_RoutingLayersCount; jj++ ) // m_RoutingLayersCount = 1 or 2
2007-08-21 14:34:54 +00:00
{
m_BoardSide[side] = nullptr;
m_DistSide[side] = nullptr;
m_DirSide[side] = nullptr;
// allocate matrix & initialize everything to empty
m_BoardSide[side] = (MATRIX_CELL*) operator new( ii * sizeof( MATRIX_CELL ) );
memset( m_BoardSide[side], 0, ii * sizeof( MATRIX_CELL ) );
if( m_BoardSide[side] == nullptr )
2007-08-21 14:34:54 +00:00
return -1;
// allocate Distances
m_DistSide[side] = (DIST_CELL*) operator new( ii * sizeof( DIST_CELL ) );
memset( m_DistSide[side], 0, ii * sizeof( DIST_CELL ) );
if( m_DistSide[side] == nullptr )
2007-08-21 14:34:54 +00:00
return -1;
// allocate Dir (chars)
m_DirSide[side] = (char*) operator new( ii );
memset( m_DirSide[side], 0, ii );
if( m_DirSide[side] == nullptr )
2007-08-21 14:34:54 +00:00
return -1;
side = AR_SIDE_TOP;
2007-08-21 14:34:54 +00:00
}
m_MemSize =
m_RouteCount * ii * ( sizeof( MATRIX_CELL ) + sizeof( DIST_CELL ) + sizeof( char ) );
2007-08-21 14:34:54 +00:00
return m_MemSize;
}
2007-08-21 14:34:54 +00:00
void AR_MATRIX::UnInitRoutingMatrix()
{
2007-08-21 14:34:54 +00:00
int ii;
m_InitMatrixDone = false;
2007-08-21 14:34:54 +00:00
for( ii = 0; ii < AR_MAX_ROUTING_LAYERS_COUNT; ii++ )
2007-08-21 14:34:54 +00:00
{
// de-allocate Dir matrix
2007-08-21 14:34:54 +00:00
if( m_DirSide[ii] )
{
delete m_DirSide[ii];
m_DirSide[ii] = nullptr;
2007-08-21 14:34:54 +00:00
}
// de-allocate Distances matrix
2007-08-21 14:34:54 +00:00
if( m_DistSide[ii] )
{
delete m_DistSide[ii];
m_DistSide[ii] = nullptr;
2007-08-21 14:34:54 +00:00
}
// de-allocate cells matrix
2007-08-21 14:34:54 +00:00
if( m_BoardSide[ii] )
{
delete m_BoardSide[ii];
m_BoardSide[ii] = nullptr;
2007-08-21 14:34:54 +00:00
}
}
m_Nrows = m_Ncols = 0;
}
// Initialize m_opWriteCell member to make the aLogicOp
void AR_MATRIX::SetCellOperation( AR_MATRIX::CELL_OP aLogicOp )
{
switch( aLogicOp )
{
default:
case WRITE_CELL: m_opWriteCell = &AR_MATRIX::SetCell; break;
case WRITE_OR_CELL: m_opWriteCell = &AR_MATRIX::OrCell; break;
case WRITE_XOR_CELL: m_opWriteCell = &AR_MATRIX::XorCell; break;
case WRITE_AND_CELL: m_opWriteCell = &AR_MATRIX::AndCell; break;
case WRITE_ADD_CELL: m_opWriteCell = &AR_MATRIX::AddCell; break;
}
}
/* return the value stored in a cell
*/
AR_MATRIX::MATRIX_CELL AR_MATRIX::GetCell( int aRow, int aCol, int aSide )
{
MATRIX_CELL* p;
p = m_BoardSide[aSide];
return p[aRow * m_Ncols + aCol];
}
/* basic cell operation : WRITE operation
*/
void AR_MATRIX::SetCell( int aRow, int aCol, int aSide, MATRIX_CELL x )
{
MATRIX_CELL* p;
p = m_BoardSide[aSide];
p[aRow * m_Ncols + aCol] = x;
}
/* basic cell operation : OR operation
*/
void AR_MATRIX::OrCell( int aRow, int aCol, int aSide, MATRIX_CELL x )
{
MATRIX_CELL* p;
p = m_BoardSide[aSide];
p[aRow * m_Ncols + aCol] |= x;
}
/* basic cell operation : XOR operation
*/
void AR_MATRIX::XorCell( int aRow, int aCol, int aSide, MATRIX_CELL x )
{
MATRIX_CELL* p;
p = m_BoardSide[aSide];
p[aRow * m_Ncols + aCol] ^= x;
}
/* basic cell operation : AND operation
*/
void AR_MATRIX::AndCell( int aRow, int aCol, int aSide, MATRIX_CELL x )
{
MATRIX_CELL* p;
p = m_BoardSide[aSide];
p[aRow * m_Ncols + aCol] &= x;
}
/* basic cell operation : ADD operation
*/
void AR_MATRIX::AddCell( int aRow, int aCol, int aSide, MATRIX_CELL x )
{
MATRIX_CELL* p;
p = m_BoardSide[aSide];
p[aRow * m_Ncols + aCol] += x;
}
// fetch distance cell
AR_MATRIX::DIST_CELL AR_MATRIX::GetDist( int aRow, int aCol, int aSide ) // fetch distance cell
{
DIST_CELL* p;
p = m_DistSide[aSide];
return p[aRow * m_Ncols + aCol];
}
// store distance cell
void AR_MATRIX::SetDist( int aRow, int aCol, int aSide, DIST_CELL x )
{
DIST_CELL* p;
p = m_DistSide[aSide];
p[aRow * m_Ncols + aCol] = x;
}
// fetch direction cell
int AR_MATRIX::GetDir( int aRow, int aCol, int aSide )
{
DIR_CELL* p;
p = m_DirSide[aSide];
return (int) ( p[aRow * m_Ncols + aCol] );
}
// store direction cell
void AR_MATRIX::SetDir( int aRow, int aCol, int aSide, int x )
{
DIR_CELL* p;
p = m_DirSide[aSide];
p[aRow * m_Ncols + aCol] = (char) x;
}
/* The tables of distances and keep out areas are established on the basis of a
* 50 units grid size (the pitch between the cells is 50 units).
* The actual distance could be computed by a scaling factor, but this is
* not needed, we can use only reduced values
2007-08-21 14:34:54 +00:00
*/
/* calculate approximate distance (manhattan distance)
*/
int AR_MATRIX::GetApxDist( int r1, int c1, int r2, int c2 )
{
int d1, d2; /* row and column deltas */
if( ( d1 = r1 - r2 ) < 0 ) /* get absolute row delta */
d1 = -d1;
if( ( d2 = c1 - c2 ) < 0 ) /* get absolute column delta */
d2 = -d2;
return ( d1 + d2 ) * 50;
}
/* distance to go thru a cell (en mils) */
static const int dist[10][10] = { /* OT=Otherside, OR=Origin (source) cell */
/*..........N, NE, E, SE, S, SW, W, NW, OT, OR */
/* N */ { 50, 60, 35, 60, 99, 60, 35, 60, 12, 12 },
/* NE */ { 60, 71, 60, 71, 60, 99, 60, 71, 23, 23 },
/* E */ { 35, 60, 50, 60, 35, 60, 99, 60, 12, 12 },
/* SE */ { 60, 71, 60, 71, 60, 71, 60, 99, 23, 23 },
/* S */ { 99, 60, 35, 60, 50, 60, 35, 60, 12, 12 },
/* SW */ { 60, 99, 60, 71, 60, 71, 60, 71, 23, 23 },
/* W */ { 35, 60, 99, 60, 35, 60, 50, 60, 12, 12 },
/* NW */ { 60, 71, 60, 99, 60, 71, 60, 71, 23, 23 },
/* OT */ { 12, 23, 12, 23, 12, 23, 12, 23, 99, 99 },
/* OR */ { 99, 99, 99, 99, 99, 99, 99, 99, 99, 99 }
};
/* penalty for extraneous holes and corners, scaled by sharpness of turn */
static const int penalty[10][10] = { /* OT=Otherside, OR=Origin (source) cell */
/*......... N, NE, E, SE, S, SW, W, NW, OT, OR */
/* N */ { 0, 5, 10, 15, 20, 15, 10, 5, 50, 0 },
/* NE */ { 5, 0, 5, 10, 15, 20, 15, 10, 50, 0 },
/* E */ { 10, 5, 0, 5, 10, 15, 20, 15, 50, 0 },
/* SE */ { 15, 10, 5, 0, 5, 10, 15, 20, 50, 0 },
/* S */ { 20, 15, 10, 5, 0, 5, 10, 15, 50, 0 },
/* SW */ { 15, 20, 15, 10, 5, 0, 5, 10, 50, 0 },
/* W */ { 10, 15, 20, 15, 10, 5, 0, 5, 50, 0 },
/* NW */ { 5, 10, 15, 20, 15, 10, 5, 0, 50, 0 },
/* OT */ { 50, 50, 50, 50, 50, 50, 50, 50, 100, 0 },
/* OR */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
};
/* penalty pour directions preferencielles */
#define PN 20
static const int dir_penalty_TOP[10][10] = {
/* OT=Otherside, OR=Origin (source) cell */
/*......... N, NE, E, SE, S, SW, W, NW, OT, OR */
/* N */ { PN, 0, 0, 0, PN, 0, 0, 0, 0, 0 },
/* NE */ { PN, 0, 0, 0, PN, 0, 0, 0, 0, 0 },
/* E */ { PN, 0, 0, 0, PN, 0, 0, 0, 0, 0 },
/* SE */ { PN, 0, 0, 0, PN, 0, 0, 0, 0, 0 },
/* S */ { PN, 0, 0, 0, PN, 0, 0, 0, 0, 0 },
/* SW */ { PN, 0, 0, 0, PN, 0, 0, 0, 0, 0 },
/* W */ { PN, 0, 0, 0, PN, 0, 0, 0, 0, 0 },
/* NW */ { PN, 0, 0, 0, PN, 0, 0, 0, 0, 0 },
/* OT */ { PN, 0, 0, 0, PN, 0, 0, 0, 0, 0 },
/* OR */ { PN, 0, 0, 0, PN, 0, 0, 0, 0, 0 }
};
static int dir_penalty_BOTTOM[10][10] = {
/* OT=Otherside, OR=Origin (source) cell */
/*......... N, NE, E, SE, S, SW, W, NW, OT, OR */
/* N */ { 0, 0, PN, 0, 0, 0, PN, 0, 0, 0 },
/* NE */ { 0, 0, PN, 0, 0, 0, PN, 0, 0, 0 },
/* E */ { 0, 0, PN, 0, 0, 0, PN, 0, 0, 0 },
/* SE */ { 0, 0, PN, 0, 0, 0, PN, 0, 0, 0 },
/* S */ { 0, 0, PN, 0, 0, 0, PN, 0, 0, 0 },
/* SW */ { 0, 0, PN, 0, 0, 0, PN, 0, 0, 0 },
/* W */ { 0, 0, PN, 0, 0, 0, PN, 0, 0, 0 },
/* NW */ { 0, 0, PN, 0, 0, 0, PN, 0, 0, 0 },
/* OT */ { 0, 0, PN, 0, 0, 0, PN, 0, 0, 0 },
/* OR */ { 0, 0, PN, 0, 0, 0, PN, 0, 0, 0 }
};
/*
** x is the direction to enter the cell of interest.
** y is the direction to exit the cell of interest.
** z is the direction to really exit the cell, if y=FROM_OTHERSIDE.
**
** return the distance of the trace through the cell of interest.
** the calculation is driven by the tables above.
*/
/* calculate distance (with penalty) of a trace through a cell
*/
int AR_MATRIX::CalcDist( int x, int y, int z, int side )
{
int adjust, ldist;
2007-08-21 14:34:54 +00:00
adjust = 0; /* set if hole is encountered */
2009-09-10 15:22:26 +00:00
if( x == CELL_IS_EMPTY )
x = 10;
2009-09-10 15:22:26 +00:00
if( y == CELL_IS_EMPTY )
{
y = 10;
}
else if( y == FROM_OTHERSIDE )
{
if( z == CELL_IS_EMPTY )
z = 10;
adjust = penalty[x - 1][z - 1];
}
2007-08-21 14:34:54 +00:00
ldist = dist[x - 1][y - 1] + penalty[x - 1][y - 1] + adjust;
if( m_RouteCount > 1 )
2007-08-21 14:34:54 +00:00
{
if( side == AR_SIDE_BOTTOM )
ldist += dir_penalty_TOP[x - 1][y - 1];
if( side == AR_SIDE_TOP )
ldist += dir_penalty_BOTTOM[x - 1][y - 1];
}
return ldist * 10;
}
#define OP_CELL( layer, dy, dx ) \
{ \
if( layer == UNDEFINED_LAYER ) \
{ \
WriteCell( dy, dx, AR_SIDE_BOTTOM, color ); \
if( m_RoutingLayersCount > 1 ) \
WriteCell( dy, dx, AR_SIDE_TOP, color ); \
} \
else \
{ \
if( layer == m_routeLayerBottom ) \
WriteCell( dy, dx, AR_SIDE_BOTTOM, color ); \
if( m_RoutingLayersCount > 1 ) \
if( layer == m_routeLayerTop ) \
WriteCell( dy, dx, AR_SIDE_TOP, color ); \
} \
}
/* Fills all cells inside a segment
* half-width = lg, org = ux0,uy0 end = ux1,uy1
* coordinates are in PCB units
*/
void AR_MATRIX::drawSegmentQcq( int ux0, int uy0, int ux1, int uy1, int lg, LAYER_NUM layer,
int color, AR_MATRIX::CELL_OP op_logic )
{
int64_t row, col;
int64_t inc;
int64_t row_max, col_max, row_min, col_min;
int64_t demi_pas;
int cx, cy, dx, dy;
//printf("segmQcq %d %d %d %d\n", ux0, uy0, ux1, uy1);
SetCellOperation( op_logic );
// Make coordinate ux1 tj > ux0 to simplify calculations
if( ux1 < ux0 )
{
std::swap( ux1, ux0 );
std::swap( uy1, uy0 );
}
// Calculating the incrementing the Y axis
inc = 1;
if( uy1 < uy0 )
inc = -1;
demi_pas = m_GridRouting / 2;
col_min = ( ux0 - lg ) / m_GridRouting;
if( col_min < 0 )
col_min = 0;
col_max = ( ux1 + lg + demi_pas ) / m_GridRouting;
if( col_max > ( m_Ncols - 1 ) )
col_max = m_Ncols - 1;
if( inc > 0 )
{
row_min = ( uy0 - lg ) / m_GridRouting;
row_max = ( uy1 + lg + demi_pas ) / m_GridRouting;
}
else
{
row_min = ( uy1 - lg ) / m_GridRouting;
row_max = ( uy0 + lg + demi_pas ) / m_GridRouting;
}
if( row_min < 0 )
row_min = 0;
if( row_min > ( m_Nrows - 1 ) )
row_min = m_Nrows - 1;
if( row_max < 0 )
row_max = 0;
if( row_max > ( m_Nrows - 1 ) )
row_max = m_Nrows - 1;
dx = ux1 - ux0;
dy = uy1 - uy0;
double angle;
if( dx )
{
angle = ArcTangente( dy, dx );
2007-08-21 14:34:54 +00:00
}
else
{
angle = 900;
if( dy < 0 )
angle = -900;
}
RotatePoint( &dx, &dy, angle ); // dx = length, dy = 0
2007-08-21 14:34:54 +00:00
//printf("col_min %d max %d row_min %d max %d\n", col_min, col_max, row_min, row_max);
for( col = col_min; col <= col_max; col++ )
2007-08-21 14:34:54 +00:00
{
int64_t cxr;
cxr = ( col * m_GridRouting ) - ux0;
for( row = row_min; row <= row_max; row++ )
2007-08-21 14:34:54 +00:00
{
cy = ( row * m_GridRouting ) - uy0;
cx = cxr;
RotatePoint( &cx, &cy, angle );
if( abs( cy ) > lg )
continue; // The point is too far on the Y axis.
/* This point a test is close to the segment: the position
* along the X axis must be tested.
*/
if( ( cx >= 0 ) && ( cx <= dx ) )
{
OP_CELL( layer, row, col );
continue;
}
// Examination of extremities are rounded.
if( ( cx < 0 ) && ( cx >= -lg ) )
{
if( ( ( cx * cx ) + ( cy * cy ) ) <= ( lg * lg ) )
OP_CELL( layer, row, col );
continue;
}
2007-08-21 14:34:54 +00:00
if( ( cx > dx ) && ( cx <= ( dx + lg ) ) )
{
if( ( ( ( cx - dx ) * ( cx - dx ) ) + ( cy * cy ) ) <= ( lg * lg ) )
OP_CELL( layer, row, col );
continue;
2007-08-21 14:34:54 +00:00
}
}
}
}
/* Fills all cells of the routing matrix contained in the circle
* half-width = lg, center = ux0, uy0, ux1,uy1 is a point on the circle.
* coord are in PCB units.
*/
void AR_MATRIX::traceCircle( int ux0, int uy0, int ux1, int uy1, int lg, LAYER_NUM layer, int color,
AR_MATRIX::CELL_OP op_logic )
{
int radius, nb_segm;
int x0, y0, // Starting point of the current segment trace.
x1, y1; // End point.
int ii;
int angle;
radius = KiROUND( Distance( ux0, uy0, ux1, uy1 ) );
2007-08-21 14:34:54 +00:00
x0 = x1 = radius;
y0 = y1 = 0;
if( lg < 1 )
lg = 1;
nb_segm = ( 2 * radius ) / lg;
if( nb_segm < 5 )
nb_segm = 5;
if( nb_segm > 100 )
nb_segm = 100;
for( ii = 1; ii < nb_segm; ii++ )
2007-08-21 14:34:54 +00:00
{
angle = ( 3600 * ii ) / nb_segm;
x1 = KiROUND( cosdecideg( radius, angle ) );
y1 = KiROUND( sindecideg( radius, angle ) );
drawSegmentQcq( x0 + ux0, y0 + uy0, x1 + ux0, y1 + uy0, lg, layer, color, op_logic );
x0 = x1;
y0 = y1;
}
drawSegmentQcq( x1 + ux0, y1 + uy0, ux0 + radius, uy0, lg, layer, color, op_logic );
}
void AR_MATRIX::traceFilledCircle(
int cx, int cy, int radius, LSET aLayerMask, int color, AR_MATRIX::CELL_OP op_logic )
{
int row, col;
int ux0, uy0, ux1, uy1;
int row_max, col_max, row_min, col_min;
int trace = 0;
double fdistmin, fdistx, fdisty;
int tstwrite = 0;
int distmin;
2007-08-21 14:34:54 +00:00
if( aLayerMask[m_routeLayerBottom] )
trace = 1; // Trace on BOTTOM
if( aLayerMask[m_routeLayerTop] )
if( m_RoutingLayersCount > 1 )
trace |= 2; // Trace on TOP
2009-06-06 18:08:49 +00:00
if( trace == 0 )
return;
2007-08-21 14:34:54 +00:00
SetCellOperation( op_logic );
cx -= GetBrdCoordOrigin().x;
cy -= GetBrdCoordOrigin().y;
distmin = radius;
2007-08-21 14:34:54 +00:00
// Calculate the bounding rectangle of the circle.
ux0 = cx - radius;
uy0 = cy - radius;
ux1 = cx + radius;
uy1 = cy + radius;
2007-08-21 14:34:54 +00:00
// Calculate limit coordinates of cells belonging to the rectangle.
row_max = uy1 / m_GridRouting;
col_max = ux1 / m_GridRouting;
row_min = uy0 / m_GridRouting; // if (uy0 > row_min*Board.m_GridRouting) row_min++;
col_min = ux0 / m_GridRouting; // if (ux0 > col_min*Board.m_GridRouting) col_min++;
if( row_min < 0 )
row_min = 0;
if( row_max >= ( m_Nrows - 1 ) )
row_max = m_Nrows - 1;
if( col_min < 0 )
col_min = 0;
if( col_max >= ( m_Ncols - 1 ) )
col_max = m_Ncols - 1;
// Calculate coordinate limits of cell belonging to the rectangle.
if( row_min > row_max )
row_max = row_min;
if( col_min > col_max )
col_max = col_min;
fdistmin = (double) distmin * distmin;
for( row = row_min; row <= row_max; row++ )
{
fdisty = (double) ( cy - ( row * m_GridRouting ) );
fdisty *= fdisty;
for( col = col_min; col <= col_max; col++ )
{
fdistx = (double) ( cx - ( col * m_GridRouting ) );
fdistx *= fdistx;
if( fdistmin <= ( fdistx + fdisty ) )
continue;
if( trace & 1 )
WriteCell( row, col, AR_SIDE_BOTTOM, color );
2007-08-21 14:34:54 +00:00
if( trace & 2 )
WriteCell( row, col, AR_SIDE_TOP, color );
tstwrite = 1;
2007-08-21 14:34:54 +00:00
}
}
if( tstwrite )
return;
/* If no cell has been written, it affects the 4 neighboring diagonal
* (Adverse event: pad off grid in the center of the 4 neighboring
* diagonal) */
distmin = m_GridRouting / 2 + 1;
fdistmin = ( (double) distmin * distmin ) * 2; // Distance to center point diagonally
for( row = row_min; row <= row_max; row++ )
{
fdisty = (double) ( cy - ( row * m_GridRouting ) );
fdisty *= fdisty;
for( col = col_min; col <= col_max; col++ )
{
fdistx = (double) ( cx - ( col * m_GridRouting ) );
fdistx *= fdistx;
if( fdistmin <= ( fdistx + fdisty ) )
continue;
if( trace & 1 )
WriteCell( row, col, AR_SIDE_BOTTOM, color );
if( trace & 2 )
WriteCell( row, col, AR_SIDE_TOP, color );
}
}
}
/* Fills all routing matrix cells contained in the arc
* angle = ArcAngle, half-width lg
* center = ux0,uy0, starting at ux1, uy1. Coordinates are in
* PCB units.
*/
void AR_MATRIX::traceArc( int ux0, int uy0, int ux1, int uy1, double ArcAngle, int lg,
LAYER_NUM layer, int color, AR_MATRIX::CELL_OP op_logic )
{
int radius, nb_segm;
int x0, y0, // Starting point of the current segment trace
x1, y1; // End point
int ii;
double angle, StAngle;
radius = KiROUND( Distance( ux0, uy0, ux1, uy1 ) );
x0 = ux1 - ux0;
y0 = uy1 - uy0;
StAngle = ArcTangente( uy1 - uy0, ux1 - ux0 );
if( lg < 1 )
lg = 1;
nb_segm = ( 2 * radius ) / lg;
nb_segm = ( nb_segm * std::abs( ArcAngle ) ) / 3600;
if( nb_segm < 5 )
nb_segm = 5;
if( nb_segm > 100 )
nb_segm = 100;
for( ii = 1; ii <= nb_segm; ii++ )
2007-08-21 14:34:54 +00:00
{
angle = ( ArcAngle * ii ) / nb_segm;
angle += StAngle;
NORMALIZE_ANGLE_POS( angle );
x1 = KiROUND( cosdecideg( radius, angle ) );
y1 = KiROUND( cosdecideg( radius, angle ) );
drawSegmentQcq( x0 + ux0, y0 + uy0, x1 + ux0, y1 + uy0, lg, layer, color, op_logic );
x0 = x1;
y0 = y1;
2007-08-21 14:34:54 +00:00
}
}
2007-08-21 14:34:54 +00:00
void AR_MATRIX::TraceFilledRectangle( int ux0, int uy0, int ux1, int uy1, double angle,
LSET aLayerMask, int color, AR_MATRIX::CELL_OP op_logic )
{
int row, col;
int cx, cy; // Center of rectangle
int radius; // Radius of the circle
int row_min, row_max, col_min, col_max;
int rotrow, rotcol;
int trace = 0;
++PCBNew * Removed Pcb_Frame argument from BOARD() constructor, since it precludes having a BOARD being edited by more than one editor, it was a bad design. And this meant removing m_PcbFrame from BOARD. * removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame * Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp * added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance * a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed, such as dialog_mask_clearance, dialog_drc, etc. * Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it with build_version.h's #define BOARD_FILE_VERSION, although there may be a better place for this constant. * Made the public functions in PARAM_CFG_ARRAY be type const. void SaveParam(..) const and void ReadParam(..) const * PARAM_CFG_BASE now has virtual destructor since we have various way of destroying the derived class and boost::ptr_vector must be told about this. * Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use an automatic PARAM_CFG_ARRAY which is on the stack.\ * PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array, since it has to access the current BOARD and the BOARD can change. Remember BOARD_DESIGN_SETTINGS are now in the BOARD. * Made the m_BoundingBox member private, this was a brutally hard task, and indicative of the lack of commitment to accessors and object oriented design on the part of KiCad developers. We must do better. Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox(). * Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
2011-12-05 06:15:33 +00:00
if( aLayerMask[m_routeLayerBottom] )
trace = 1; // Trace on BOTTOM
if( aLayerMask[m_routeLayerTop] )
2007-08-21 14:34:54 +00:00
{
if( m_RoutingLayersCount > 1 )
trace |= 2; // Trace on TOP
}
if( trace == 0 )
return;
SetCellOperation( op_logic );
ux0 -= GetBrdCoordOrigin().x;
uy0 -= GetBrdCoordOrigin().y;
ux1 -= GetBrdCoordOrigin().x;
uy1 -= GetBrdCoordOrigin().y;
cx = ( ux0 + ux1 ) / 2;
cy = ( uy0 + uy1 ) / 2;
radius = KiROUND( Distance( ux0, uy0, cx, cy ) );
// Calculating coordinate limits belonging to the rectangle.
row_max = ( cy + radius ) / m_GridRouting;
col_max = ( cx + radius ) / m_GridRouting;
row_min = ( cy - radius ) / m_GridRouting;
if( uy0 > row_min * m_GridRouting )
row_min++;
col_min = ( cx - radius ) / m_GridRouting;
if( ux0 > col_min * m_GridRouting )
col_min++;
if( row_min < 0 )
row_min = 0;
if( row_max >= ( m_Nrows - 1 ) )
row_max = m_Nrows - 1;
if( col_min < 0 )
col_min = 0;
if( col_max >= ( m_Ncols - 1 ) )
col_max = m_Ncols - 1;
for( row = row_min; row <= row_max; row++ )
{
for( col = col_min; col <= col_max; col++ )
{
rotrow = row * m_GridRouting;
rotcol = col * m_GridRouting;
RotatePoint( &rotcol, &rotrow, cx, cy, -angle );
if( rotrow <= uy0 )
continue;
if( rotrow >= uy1 )
continue;
if( rotcol <= ux0 )
continue;
if( rotcol >= ux1 )
continue;
if( trace & 1 )
WriteCell( row, col, AR_SIDE_BOTTOM, color );
if( trace & 2 )
WriteCell( row, col, AR_SIDE_TOP, color );
}
}
}
void AR_MATRIX::TraceFilledRectangle( int ux0, int uy0, int ux1, int uy1, LSET aLayerMask,
int color, AR_MATRIX::CELL_OP op_logic )
{
int row, col;
int row_min, row_max, col_min, col_max;
int trace = 0;
if( aLayerMask[m_routeLayerBottom] )
trace = 1; // Trace on BOTTOM
if( aLayerMask[m_routeLayerTop] && m_RoutingLayersCount > 1 )
trace |= 2; // Trace on TOP
if( trace == 0 )
return;
SetCellOperation( op_logic );
ux0 -= GetBrdCoordOrigin().x;
uy0 -= GetBrdCoordOrigin().y;
ux1 -= GetBrdCoordOrigin().x;
uy1 -= GetBrdCoordOrigin().y;
// Calculating limits coord cells belonging to the rectangle.
row_max = uy1 / m_GridRouting;
col_max = ux1 / m_GridRouting;
row_min = uy0 / m_GridRouting;
if( uy0 > row_min * m_GridRouting )
row_min++;
col_min = ux0 / m_GridRouting;
if( ux0 > col_min * m_GridRouting )
col_min++;
2007-08-21 14:34:54 +00:00
if( row_min < 0 )
row_min = 0;
2007-08-21 14:34:54 +00:00
if( row_max >= ( m_Nrows - 1 ) )
row_max = m_Nrows - 1;
if( col_min < 0 )
col_min = 0;
if( col_max >= ( m_Ncols - 1 ) )
col_max = m_Ncols - 1;
for( row = row_min; row <= row_max; row++ )
{
for( col = col_min; col <= col_max; col++ )
2007-08-21 14:34:54 +00:00
{
if( trace & 1 )
WriteCell( row, col, AR_SIDE_BOTTOM, color );
if( trace & 2 )
WriteCell( row, col, AR_SIDE_TOP, color );
2007-08-21 14:34:54 +00:00
}
}
}
/* Draws a line, if layer = -1 on all layers
*/
void AR_MATRIX::tracePcbLine(
int x0, int y0, int x1, int y1, LAYER_NUM layer, int color, AR_MATRIX::CELL_OP op_logic )
{
int dx, dy, lim;
int cumul, inc, il, delta;
SetCellOperation( op_logic );
if( x0 == x1 ) // Vertical.
{
if( y1 < y0 )
std::swap( y0, y1 );
dy = y0 / m_GridRouting;
lim = y1 / m_GridRouting;
dx = x0 / m_GridRouting;
// Clipping limits of board.
if( ( dx < 0 ) || ( dx >= m_Ncols ) )
return;
if( dy < 0 )
dy = 0;
if( lim >= m_Nrows )
lim = m_Nrows - 1;
for( ; dy <= lim; dy++ )
2007-08-21 14:34:54 +00:00
{
OP_CELL( layer, dy, dx );
2007-08-21 14:34:54 +00:00
}
return;
}
if( y0 == y1 ) // Horizontal
{
if( x1 < x0 )
std::swap( x0, x1 );
2007-08-21 14:34:54 +00:00
dx = x0 / m_GridRouting;
lim = x1 / m_GridRouting;
dy = y0 / m_GridRouting;
// Clipping limits of board.
if( ( dy < 0 ) || ( dy >= m_Nrows ) )
return;
if( dx < 0 )
dx = 0;
if( lim >= m_Ncols )
lim = m_Ncols - 1;
for( ; dx <= lim; dx++ )
2007-08-21 14:34:54 +00:00
{
OP_CELL( layer, dy, dx );
2007-08-21 14:34:54 +00:00
}
return;
}
// Here is some perspective: using the algorithm LUCAS.
if( abs( x1 - x0 ) >= abs( y1 - y0 ) ) // segment slightly inclined/
{
if( x1 < x0 )
2007-08-21 14:34:54 +00:00
{
std::swap( x1, x0 );
std::swap( y1, y0 );
2007-08-21 14:34:54 +00:00
}
dx = x0 / m_GridRouting;
lim = x1 / m_GridRouting;
dy = y0 / m_GridRouting;
inc = 1;
if( y1 < y0 )
inc = -1;
il = lim - dx;
cumul = il / 2;
delta = abs( y1 - y0 ) / m_GridRouting;
for( ; dx <= lim; )
{
if( ( dx >= 0 ) && ( dy >= 0 ) && ( dx < m_Ncols ) && ( dy < m_Nrows ) )
{
OP_CELL( layer, dy, dx );
}
dx++;
cumul += delta;
if( cumul > il )
{
cumul -= il;
dy += inc;
}
}
2007-08-21 14:34:54 +00:00
}
else
{
if( y1 < y0 )
{
std::swap( x1, x0 );
std::swap( y1, y0 );
}
2007-08-21 14:34:54 +00:00
dy = y0 / m_GridRouting;
lim = y1 / m_GridRouting;
dx = x0 / m_GridRouting;
inc = 1;
if( x1 < x0 )
inc = -1;
il = lim - dy;
cumul = il / 2;
delta = abs( x1 - x0 ) / m_GridRouting;
for( ; dy <= lim; )
{
if( ( dx >= 0 ) && ( dy >= 0 ) && ( dx < m_Ncols ) && ( dy < m_Nrows ) )
{
OP_CELL( layer, dy, dx );
}
dy++;
cumul += delta;
if( cumul > il )
{
cumul -= il;
dx += inc;
}
}
}
}
void AR_MATRIX::TraceSegmentPcb(
DRAWSEGMENT* pt_segm, int color, int marge, AR_MATRIX::CELL_OP op_logic )
{
int half_width = ( pt_segm->GetWidth() / 2 ) + marge;
// Calculate the bounding rectangle of the segment (if H, V or Via)
int ux0 = pt_segm->GetStart().x - GetBrdCoordOrigin().x;
int uy0 = pt_segm->GetStart().y - GetBrdCoordOrigin().y;
int ux1 = pt_segm->GetEnd().x - GetBrdCoordOrigin().x;
int uy1 = pt_segm->GetEnd().y - GetBrdCoordOrigin().y;
//printf("traceSegm %d %d %d %d\n", ux0, uy0, ux1, uy1);
LAYER_NUM layer = pt_segm->GetLayer();
//if( color == VIA_IMPOSSIBLE )
layer = UNDEFINED_LAYER;
switch( pt_segm->GetShape() )
{
// The segment is here a straight line or a circle or an arc.:
case S_CIRCLE: traceCircle( ux0, uy0, ux1, uy1, half_width, layer, color, op_logic ); break;
case S_ARC:
traceArc( ux0, uy0, ux1, uy1, pt_segm->GetAngle(), half_width, layer, color, op_logic );
break;
// The segment is here a line segment.
default: drawSegmentQcq( ux0, uy0, ux1, uy1, half_width, layer, color, op_logic ); break;
}
}
void AR_MATRIX::TraceSegmentPcb( TRACK* aTrack, int color, int marge, AR_MATRIX::CELL_OP op_logic )
{
int half_width = ( aTrack->GetWidth() / 2 ) + marge;
// Test if VIA (filled circle need to be drawn)
if( aTrack->Type() == PCB_VIA_T )
{
LSET layer_mask;
if( aTrack->IsOnLayer( m_routeLayerBottom ) )
layer_mask.set( m_routeLayerBottom );
if( aTrack->IsOnLayer( m_routeLayerTop ) )
{
if( !layer_mask.any() )
layer_mask = LSET( m_routeLayerTop );
else
layer_mask.set();
}
if( color == VIA_IMPOSSIBLE )
layer_mask.set();
if( layer_mask.any() )
traceFilledCircle( aTrack->GetStart().x, aTrack->GetStart().y, half_width, layer_mask,
color, op_logic );
}
else
{
// Calculate the bounding rectangle of the segment
int ux0 = aTrack->GetStart().x - GetBrdCoordOrigin().x;
int uy0 = aTrack->GetStart().y - GetBrdCoordOrigin().y;
int ux1 = aTrack->GetEnd().x - GetBrdCoordOrigin().x;
int uy1 = aTrack->GetEnd().y - GetBrdCoordOrigin().y;
// Ordinary track
PCB_LAYER_ID layer = aTrack->GetLayer();
if( color == VIA_IMPOSSIBLE )
layer = UNDEFINED_LAYER;
drawSegmentQcq( ux0, uy0, ux1, uy1, half_width, layer, color, op_logic );
}
}
/**
* Function CreateKeepOutRectangle
* builds the cost map:
* Cells ( in Dist map ) inside the rect x0,y0 a x1,y1 are
* incremented by value aKeepOut
* Cell outside this rectangle, but inside the rectangle
* x0,y0 -marge to x1,y1 + marge are incremented by a decreasing value
* (aKeepOut ... 0). The decreasing value depends on the distance to the first rectangle
* Therefore the cost is high in rect x0,y0 to x1,y1, and decrease outside this rectangle
*/
void AR_MATRIX::CreateKeepOutRectangle(
int ux0, int uy0, int ux1, int uy1, int marge, int aKeepOut, LSET aLayerMask )
{
int row, col;
int row_min, row_max, col_min, col_max, pmarge;
int trace = 0;
DIST_CELL data, LocalKeepOut;
int lgain, cgain;
if( aLayerMask[m_routeLayerBottom] )
trace = 1; // Trace on bottom layer.
if( aLayerMask[m_routeLayerTop] && m_RoutingLayersCount )
trace |= 2; // Trace on top layer.
if( trace == 0 )
return;
ux0 -= m_BrdBox.GetX();
uy0 -= m_BrdBox.GetY();
ux1 -= m_BrdBox.GetX();
uy1 -= m_BrdBox.GetY();
ux0 -= marge;
ux1 += marge;
uy0 -= marge;
uy1 += marge;
pmarge = marge / m_GridRouting;
if( pmarge < 1 )
pmarge = 1;
// Calculate the coordinate limits of the rectangle.
row_max = uy1 / m_GridRouting;
col_max = ux1 / m_GridRouting;
row_min = uy0 / m_GridRouting;
if( uy0 > row_min * m_GridRouting )
row_min++;
col_min = ux0 / m_GridRouting;
if( ux0 > col_min * m_GridRouting )
col_min++;
if( row_min < 0 )
row_min = 0;
if( row_max >= ( m_Nrows - 1 ) )
row_max = m_Nrows - 1;
if( col_min < 0 )
col_min = 0;
if( col_max >= ( m_Ncols - 1 ) )
col_max = m_Ncols - 1;
for( row = row_min; row <= row_max; row++ )
{
lgain = 256;
if( row < pmarge )
lgain = ( 256 * row ) / pmarge;
else if( row > row_max - pmarge )
lgain = ( 256 * ( row_max - row ) ) / pmarge;
for( col = col_min; col <= col_max; col++ )
{
// RoutingMatrix Dist map containt the "cost" of the cell
// at position (row, col)
// in autoplace this is the cost of the cell, when
// a footprint overlaps it, near a "master" footprint
// this cost is hight near the "master" footprint
// and decrease with the distance
cgain = 256;
LocalKeepOut = aKeepOut;
if( col < pmarge )
cgain = ( 256 * col ) / pmarge;
else if( col > col_max - pmarge )
cgain = ( 256 * ( col_max - col ) ) / pmarge;
cgain = ( cgain * lgain ) / 256;
if( cgain != 256 )
LocalKeepOut = ( LocalKeepOut * cgain ) / 256;
if( trace & 1 )
{
data = GetDist( row, col, AR_SIDE_BOTTOM ) + LocalKeepOut;
SetDist( row, col, AR_SIDE_BOTTOM, data );
}
if( trace & 2 )
{
data = GetDist( row, col, AR_SIDE_TOP );
data = std::max( data, LocalKeepOut );
SetDist( row, col, AR_SIDE_TOP, data );
}
}
}
}
void AR_MATRIX::PlacePad( D_PAD* aPad, int color, int marge, AR_MATRIX::CELL_OP op_logic )
{
int dx, dy;
wxPoint shape_pos = aPad->ShapePos();
dx = aPad->GetSize().x / 2;
dx += marge;
if( aPad->GetShape() == PAD_SHAPE_CIRCLE )
{
traceFilledCircle( shape_pos.x, shape_pos.y, dx, aPad->GetLayerSet(), color, op_logic );
return;
}
dy = aPad->GetSize().y / 2;
dy += marge;
if( aPad->GetShape() == PAD_SHAPE_TRAPEZOID )
{
dx += abs( aPad->GetDelta().y ) / 2;
dy += abs( aPad->GetDelta().x ) / 2;
}
// The pad is a rectangle ( horizontal or vertical )
if( int( aPad->GetOrientation() ) % 900 == 0 )
{
// Orientation turned 90 deg.
if( aPad->GetOrientation() == 900 || aPad->GetOrientation() == 2700 )
{
std::swap( dx, dy );
}
TraceFilledRectangle( shape_pos.x - dx, shape_pos.y - dy, shape_pos.x + dx,
shape_pos.y + dy, aPad->GetLayerSet(), color, op_logic );
}
else
{
TraceFilledRectangle( shape_pos.x - dx, shape_pos.y - dy, shape_pos.x + dx,
shape_pos.y + dy, aPad->GetOrientation(), aPad->GetLayerSet(), color, op_logic );
}
}