kicad/gerbview/files.cpp

/**
 * @file gerbview/files.cpp
 */

#include "fctsys.h"
#include "common.h"
#include "class_drawpanel.h"
#include "confirm.h"
#include "gestfich.h"

#include "gerbview.h"
#include "gerbview_id.h"
#include "class_gerbview_layer_widget.h"


void GERBVIEW_FRAME::OnGbrFileHistory( wxCommandEvent& event )
{
    wxString fn;

    fn = GetFileFromHistory( event.GetId(), _( "Gerber files" ) );

    if( !fn.IsEmpty() )
    {
        Erase_Current_Layer( false );
        LoadGerberFiles( fn );
    }
}


void GERBVIEW_FRAME::OnDrlFileHistory( wxCommandEvent& event )
{
    wxString fn;

    fn = GetFileFromHistory( event.GetId(), _( "Drill files" ), &m_drillFileHistory );

    if( !fn.IsEmpty() )
    {
        Erase_Current_Layer( false );
        LoadExcellonFiles( fn );
    }
}


/* File commands. */
void GERBVIEW_FRAME::Files_io( wxCommandEvent& event )
{
    int        id = event.GetId();

    switch( id )
    {
    case wxID_FILE:
        Erase_Current_Layer( false );
        LoadGerberFiles( wxEmptyString );
        break;

    case ID_GERBVIEW_ERASE_ALL:
        Clear_Pcb( true );
        Zoom_Automatique( false );
        m_canvas->Refresh();
        ClearMsgPanel();
        break;

    case ID_GERBVIEW_LOAD_DRILL_FILE:
        LoadExcellonFiles( wxEmptyString );
        m_canvas->Refresh();
        break;

    case ID_GERBVIEW_LOAD_DCODE_FILE:
        LoadDCodeFile( wxEmptyString );
        m_canvas->Refresh();
        break;

    default:
        wxFAIL_MSG( wxT( "File_io: unexpected command id" ) );
        break;
    }
}


bool GERBVIEW_FRAME::LoadGerberFiles( const wxString& aFullFileName )
{
    wxString   filetypes;
    wxArrayString filenamesList;
    wxFileName filename = aFullFileName;
    wxString currentPath;

    if( !filename.IsOk() )
    {
        /* Standard gerber filetypes
         * (See http://en.wikipedia.org/wiki/Gerber_File)
         * the .pho extension is the default used in Pcbnew
         * However there are a lot of other extensions used for gerber files
         * Because the first letter is usually g, we accept g* as extension
         * (Mainly internal copper layers do not have specific extention,
         *  and filenames are like *.g1, *.g2 *.gb1 ...).
         */
        filetypes = _( "Gerber files (.g* .lgr .pho)" );
        filetypes << wxT("|");
        filetypes += wxT("*.g*;*.G*;*.lgr;*.LGR;*.pho;*.PHO" );
        filetypes << wxT("|");

        /* Special gerber filetypes */
        filetypes += _( "Top layer (*.GTL)|*.GTL;*.gtl|" );
        filetypes += _( "Bottom layer (*.GBL)|*.GBL;*.gbl|" );
        filetypes += _( "Bottom solder resist (*.GBS)|*.GBS;*.gbs|" );
        filetypes += _( "Top solder resist (*.GTS)|*.GTS;*.gts|" );
        filetypes += _( "Bottom overlay (*.GBO)|*.GBO;*.gbo|" );
        filetypes += _( "Top overlay (*.GTO)|*.GTO;*.gto|" );
        filetypes += _( "Bottom paste (*.GBP)|*.GBP;*.gbp|" );
        filetypes += _( "Top paste (*.GTP)|*.GTP;*.gtp|" );
        filetypes += _( "Keep-out layer (*.GKO)|*.GKO;*.gko|" );
        filetypes += _( "Mechanical layers (*.GMx)|*.GM1;*.gm1;*.GM2;*.gm2;*.GM3;*.gm3|" );
        filetypes += _( "Top Pad Master (*.GPT)|*.GPT;*.gpt|" );
        filetypes += _( "Bottom Pad Master (*.GPB)|*.GPB;*.gpb|" );

        /* All filetypes */
        filetypes += AllFilesWildcard;

        /* Use the current working directory if the file name path does not exist. */
        if( filename.DirExists() )
            currentPath = filename.GetPath();
        else
            currentPath = wxGetCwd();

        wxFileDialog dlg( this,
                          _( "Open Gerber File" ),
                          currentPath,
                          filename.GetFullName(),
                          filetypes,
                          wxFD_OPEN | wxFD_FILE_MUST_EXIST | wxFD_MULTIPLE | wxFD_CHANGE_DIR );

        if( dlg.ShowModal() == wxID_CANCEL )
            return false;

        dlg.GetPaths( filenamesList );
        currentPath = wxGetCwd();
    }
    else
    {
        wxFileName filename = aFullFileName;
        filenamesList.Add( aFullFileName );
        currentPath = filename.GetPath();
    }

    // Read gerber files: each file is loaded on a new GerbView layer
    int layer = getActiveLayer();

    for( unsigned ii = 0; ii < filenamesList.GetCount(); ii++ )
    {
        wxFileName filename = filenamesList[ii];

        if( !filename.IsAbsolute() )
            filename.SetPath( currentPath );

        GetScreen()->SetFileName( filename.GetFullPath() );

        setActiveLayer( layer, false );

        if( Read_GERBER_File( filename.GetFullPath(), filename.GetFullPath() ) )
        {
            UpdateFileHistory( GetScreen()->GetFileName() );

            layer = getNextAvailableLayer( layer );

            if( layer == NO_AVAILABLE_LAYERS )
            {
                wxString msg = wxT( "No more empty layers are available.  The remaining gerber " );
                msg += wxT( "files will not be loaded." );
                wxMessageBox( msg );
                break;
            }

            setActiveLayer( layer, false );
        }
    }

    Zoom_Automatique( false );

    // Synchronize layers tools with actual active layer:
    setActiveLayer( getActiveLayer() );
    m_LayersManager->UpdateLayerIcons();
    syncLayerBox();
    return true;
}

bool GERBVIEW_FRAME::LoadExcellonFiles( const wxString& aFullFileName )
{
    wxString   filetypes;
    wxArrayString filenamesList;
    wxFileName filename = aFullFileName;
    wxString currentPath;

    if( !filename.IsOk() )
    {
        filetypes = _( "Drill files (.drl)" );
        filetypes << wxT("|");
        filetypes += wxT(";*.drl;*.DRL" );
        filetypes << wxT("|");
        /* All filetypes */
        filetypes += AllFilesWildcard;

        /* Use the current working directory if the file name path does not exist. */
        if( filename.DirExists() )
            currentPath = filename.GetPath();
        else
            currentPath = wxGetCwd();

        wxFileDialog dlg( this,
                          _( "Open Drill File" ),
                          currentPath,
                          filename.GetFullName(),
                          filetypes,
                          wxFD_OPEN | wxFD_FILE_MUST_EXIST | wxFD_MULTIPLE | wxFD_CHANGE_DIR );

        if( dlg.ShowModal() == wxID_CANCEL )
            return false;

        dlg.GetPaths( filenamesList );
        currentPath = wxGetCwd();
    }
    else
    {
        wxFileName filename = aFullFileName;
        filenamesList.Add( aFullFileName );
        currentPath = filename.GetPath();
    }

    // Read gerber files: each file is loaded on a new GerbView layer
    int layer = getActiveLayer();

    for( unsigned ii = 0; ii < filenamesList.GetCount(); ii++ )
    {
        wxFileName filename = filenamesList[ii];

        if( !filename.IsAbsolute() )
            filename.SetPath( currentPath );

        GetScreen()->SetFileName( filename.GetFullPath() );

        setActiveLayer( layer, false );

        if( Read_EXCELLON_File( filename.GetFullPath() ) )
        {
            // Update the list of recentdrill files.
            UpdateFileHistory( filename.GetFullPath(),  &m_drillFileHistory );

            layer = getNextAvailableLayer( layer );

            if( layer == NO_AVAILABLE_LAYERS )
            {
                wxString msg = wxT( "No more empty layers are available.  The remaining gerber " );
                msg += wxT( "files will not be loaded." );
                wxMessageBox( msg );
                break;
            }

            setActiveLayer( layer, false );
        }
    }

    Zoom_Automatique( false );

    // Synchronize layers tools with actual active layer:
    setActiveLayer( getActiveLayer() );
    m_LayersManager->UpdateLayerIcons();
    syncLayerBox();

    return true;
}


bool GERBVIEW_FRAME::LoadDCodeFile( const wxString& aFullFileName )
{
    wxString   wildcard;
    wxFileName fn = aFullFileName;

    if( !fn.IsOk() )
    {
        wildcard = _( "Gerber DCODE files" );
        wildcard += wxT(" ") + AllFilesWildcard;
        fn = GetScreen()->GetFileName();
        wxFileDialog dlg( this, _( "Load GERBER DCODE File" ),
                          fn.GetPath(), fn.GetFullName(), wildcard,
                          wxFD_OPEN | wxFD_FILE_MUST_EXIST );

        if( dlg.ShowModal() == wxID_CANCEL )
            return false;

        fn = dlg.GetPath();
    }

    ReadDCodeDefinitionFile( fn.GetFullPath() );
    CopyDCodesSizeToItems();
    return true;
}