kicad/pcbnew/pcbplot.cpp

513 lines
16 KiB
C++
Raw Normal View History

2012-06-09 09:38:58 +00:00
/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 2018 Jean-Pierre Charras, jp.charras at wanadoo.fr
2012-06-09 09:38:58 +00:00
* Copyright (C) 2012 SoftPLC Corporation, Dick Hollenbeck <dick@softplc.com>
2022-01-23 12:56:11 +00:00
* Copyright (C) 1992-2022 KiCad Developers, see AUTHORS.txt for contributors.
2012-06-09 09:38:58 +00:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include <plotters/plotter.h>
#include <pcbplot.h>
#include <base_units.h>
2020-10-24 01:38:50 +00:00
#include <locale_io.h>
#include <reporter.h>
#include <board.h>
#include <board_design_settings.h>
2012-08-29 16:59:50 +00:00
#include <plotcontroller.h>
#include <pcb_plot_params.h>
2012-08-29 16:59:50 +00:00
#include <wx/ffile.h>
#include <dialog_plot.h>
#include <build_version.h>
#include <gbr_metadata.h>
2020-10-14 23:34:44 +00:00
#include <render_settings.h>
2007-05-06 16:03:28 +00:00
2021-07-21 23:14:56 +00:00
const wxString GetGerberProtelExtension( int aLayer )
2012-08-29 16:59:50 +00:00
{
if( IsCopperLayer( aLayer ) )
2012-08-29 16:59:50 +00:00
{
if( aLayer == F_Cu )
return wxT( "gtl" );
else if( aLayer == B_Cu )
return wxT( "gbl" );
else
return wxString::Format( wxT( "g%d" ), aLayer+1 );
}
else
{
switch( aLayer )
{
case B_Adhes: return wxT( "gba" );
case F_Adhes: return wxT( "gta" );
case B_Paste: return wxT( "gbp" );
case F_Paste: return wxT( "gtp" );
case B_SilkS: return wxT( "gbo" );
case F_SilkS: return wxT( "gto" );
case B_Mask: return wxT( "gbs" );
case F_Mask: return wxT( "gts" );
case Edge_Cuts: return wxT( "gm1" );
case Dwgs_User:
case Cmts_User:
case Eco1_User:
case Eco2_User:
default: return wxT( "gbr" );
}
2012-08-29 16:59:50 +00:00
}
}
2012-08-29 16:59:50 +00:00
2021-07-21 23:14:56 +00:00
const wxString GetGerberFileFunctionAttribute( const BOARD* aBoard, int aLayer )
{
wxString attrib;
switch( aLayer )
{
2014-06-30 06:44:46 +00:00
case F_Adhes:
2022-02-04 22:44:59 +00:00
attrib = wxT( "Glue,Top" );
break;
2014-06-30 06:44:46 +00:00
case B_Adhes:
2022-02-04 22:44:59 +00:00
attrib = wxT( "Glue,Bot" );
break;
2014-06-30 06:44:46 +00:00
case F_SilkS:
2022-02-04 22:44:59 +00:00
attrib = wxT( "Legend,Top" );
break;
2014-06-30 06:44:46 +00:00
case B_SilkS:
2022-02-04 22:44:59 +00:00
attrib = wxT( "Legend,Bot" );
break;
2014-06-30 06:44:46 +00:00
case F_Mask:
2022-02-04 22:44:59 +00:00
attrib = wxT( "Soldermask,Top" );
break;
2014-06-30 06:44:46 +00:00
case B_Mask:
2022-02-04 22:44:59 +00:00
attrib = wxT( "Soldermask,Bot" );
break;
2014-06-30 06:44:46 +00:00
case F_Paste:
2022-02-04 22:44:59 +00:00
attrib = wxT( "Paste,Top" );
break;
2014-06-30 06:44:46 +00:00
case B_Paste:
2022-02-04 22:44:59 +00:00
attrib = wxT( "Paste,Bot" );
break;
2014-06-30 06:44:46 +00:00
case Edge_Cuts:
// Board outline.
// Can be "Profile,NP" (Not Plated: usual) or "Profile,P"
// This last is the exception (Plated)
2022-02-04 22:44:59 +00:00
attrib = wxT( "Profile,NP" );
break;
2014-06-30 06:44:46 +00:00
case Dwgs_User:
2022-02-04 22:44:59 +00:00
attrib = wxT( "OtherDrawing,Comment" );
break;
2014-06-30 06:44:46 +00:00
case Cmts_User:
2022-02-04 22:44:59 +00:00
attrib = wxT( "Other,Comment" );
break;
2014-06-30 06:44:46 +00:00
case Eco1_User:
2022-02-04 22:44:59 +00:00
attrib = wxT( "Other,ECO1" );
2014-06-30 06:44:46 +00:00
break;
case Eco2_User:
2022-02-04 22:44:59 +00:00
attrib = wxT( "Other,ECO2" );
2014-06-30 06:44:46 +00:00
break;
case B_Fab:
// This is actually a assembly layer
2022-02-04 22:44:59 +00:00
attrib = wxT( "AssemblyDrawing,Bot" );
break;
case F_Fab:
// This is actually a assembly layer
2022-02-04 22:44:59 +00:00
attrib = wxT( "AssemblyDrawing,Top" );
break;
2014-06-30 06:44:46 +00:00
case B_Cu:
attrib.Printf( wxT( "Copper,L%d,Bot" ), aBoard->GetCopperLayerCount() );
2014-06-30 06:44:46 +00:00
break;
case F_Cu:
2022-02-04 22:44:59 +00:00
attrib = wxT( "Copper,L1,Top" );
break;
2014-06-30 06:44:46 +00:00
default:
if( IsCopperLayer( aLayer ) )
attrib.Printf( wxT( "Copper,L%d,Inr" ), aLayer+1 );
else
attrib.Printf( wxT( "Other,User" ), aLayer+1 );
break;
}
// This code adds a optional parameter: the type of copper layers.
// Because it is not used by Pcbnew (it can be used only by external autorouters)
// user do not really set this parameter.
// Therefore do not add it.
// However, this code is left here, for perhaps a future usage.
#if 0
// Add the signal type of the layer, if relevant
2014-06-30 06:44:46 +00:00
if( IsCopperLayer( aLayer ) )
{
LAYER_T type = aBoard->GetLayerType( ToLAYER_ID( aLayer ) );
switch( type )
{
case LT_SIGNAL:
2022-02-04 22:44:59 +00:00
attrib += wxT( ",Signal" );
break;
case LT_POWER:
2022-02-04 22:44:59 +00:00
attrib += wxT( ",Plane" );
break;
case LT_MIXED:
2022-02-04 22:44:59 +00:00
attrib += wxT( ",Mixed" );
break;
default:
break; // do nothing (but avoid a warning for unhandled LAYER_T values from GCC)
}
}
#endif
wxString fileFct;
2022-02-04 22:44:59 +00:00
fileFct.Printf( wxT( "%%TF.FileFunction,%s*%%" ), attrib );
return fileFct;
}
2021-07-21 23:14:56 +00:00
static const wxString GetGerberFilePolarityAttribute( int aLayer )
{
/* build the string %TF.FilePolarity,Positive*%
* or %TF.FilePolarity,Negative*%
* an emply string for layers which do not use a polarity
*
* The value of the .FilePolarity specifies whether the image represents the
* presence or absence of material.
* This attribute can only be used when the file represents a pattern in a material layer,
* e.g. copper, solder mask, legend.
* Together with.FileFunction it defines the role of that image in
* the layer structure of the PCB.
* Note that the .FilePolarity attribute does not change the image -
* no attribute does.
* It changes the interpretation of the image.
* For example, in a copper layer in positive polarity a round flash generates a copper pad.
* In a copper layer in negative polarity it generates a clearance.
* Solder mask images usually represent solder mask openings and are then negative.
* This may be counter-intuitive.
*/
int polarity = 0;
switch( aLayer )
{
case F_Adhes:
case B_Adhes:
case F_SilkS:
case B_SilkS:
case F_Paste:
case B_Paste:
polarity = 1;
break;
case F_Mask:
case B_Mask:
polarity = -1;
break;
default:
if( IsCopperLayer( aLayer ) )
polarity = 1;
break;
}
wxString filePolarity;
if( polarity == 1 )
2022-02-04 22:44:59 +00:00
filePolarity = wxT( "%TF.FilePolarity,Positive*%" );
if( polarity == -1 )
2022-02-04 22:44:59 +00:00
filePolarity = wxT( "%TF.FilePolarity,Negative*%" );
return filePolarity;
}
2021-07-19 23:56:05 +00:00
/* Add some X2 attributes to the file header, as defined in the
* Gerber file format specification J4 and "Revision 2015.06"
*/
2021-07-19 23:56:05 +00:00
// A helper function to convert a X2 attribute string to a X1 structured comment:
static wxString& makeStringCompatX1( wxString& aText, bool aUseX1CompatibilityMode )
{
if( aUseX1CompatibilityMode )
{
2022-02-04 22:44:59 +00:00
aText.Replace( wxT( "%" ), wxEmptyString );
aText.Prepend( wxT( "G04 #@! " ) );
}
return aText;
}
void AddGerberX2Header( PLOTTER* aPlotter, const BOARD* aBoard, bool aUseX1CompatibilityMode )
{
wxString text;
// Creates the TF,.GenerationSoftware. Format is:
// %TF,.GenerationSoftware,<vendor>,<application name>[,<application version>]*%
text.Printf( wxT( "%%TF.GenerationSoftware,KiCad,Pcbnew,%s*%%" ), GetBuildVersion() );
aPlotter->AddLineToHeader( makeStringCompatX1( text, aUseX1CompatibilityMode ) );
// creates the TF.CreationDate attribute:
2022-01-23 12:56:11 +00:00
text = GbrMakeCreationDateAttributeString( aUseX1CompatibilityMode ? GBR_NC_STRING_FORMAT_X1
: GBR_NC_STRING_FORMAT_X2 );
aPlotter->AddLineToHeader( text );
// Creates the TF,.ProjectId. Format is (from Gerber file format doc):
// %TF.ProjectId,<project id>,<project GUID>,<revision id>*%
// <project id> is the name of the project, restricted to basic ASCII symbols only,
2021-07-19 23:56:05 +00:00
// Rem: <project id> accepts only ASCII 7 code (only basic ASCII codes are allowed in
// gerber files) and comma not accepted.
// All illegal chars will be replaced by underscore.
//
// <project GUID> is a string which is an unique id of a project.
// However Kicad does not handle such a project GUID, so it is built from the board name
wxFileName fn = aBoard->GetFileName();
wxString msg = fn.GetFullName();
// Build a <project GUID>, from the board name
wxString guid = GbrMakeProjectGUIDfromString( msg );
// build the <project id> string: this is the board short filename (without ext)
// and all non ASCII chars and comma are replaced by '_'
msg = fn.GetName();
msg.Replace( wxT( "," ), wxT( "_" ) );
// build the <revision id> string. All non ASCII chars and comma are replaced by '_'
wxString rev = ExpandTextVars( aBoard->GetTitleBlock().GetRevision(), aBoard->GetProject() );
rev.Replace( wxT( "," ), wxT( "_" ) );
if( rev.IsEmpty() )
rev = wxT( "rev?" );
text.Printf( wxT( "%%TF.ProjectId,%s,%s,%s*%%" ), msg.ToAscii(), guid, rev.ToAscii() );
aPlotter->AddLineToHeader( makeStringCompatX1( text, aUseX1CompatibilityMode ) );
2022-01-23 12:56:11 +00:00
// Add the TF.SameCoordinates to specify that all gerber files uses the same origin and
// orientation, and the registration between files is OK.
// The parameter of TF.SameCoordinates is a string that is common to all files using the
// same registration. The string value has no meaning; it is just a key.
// Because there is no mirroring/rotation in Kicad, only the plot offset origin can create
// incorrect registration, so we create a key from plot offset options.
//
2022-01-23 12:56:11 +00:00
// Currently the key is "Original" when using absolute Pcbnew coordinates, and the PY and PY
// position of the auxiliary axis when using it.
// If we ever add user-settable absolute Pcbnew coordinates, we'll need to change the way
// the key is built to ensure file only using the *same* axis have the same key.
2022-02-04 22:44:59 +00:00
wxString registration_id = wxT( "Original" );
VECTOR2I auxOrigin = aBoard->GetDesignSettings().GetAuxOrigin();
if( aBoard->GetPlotOptions().GetUseAuxOrigin() && auxOrigin.x && auxOrigin.y )
2022-02-04 22:44:59 +00:00
registration_id.Printf( wxT( "PX%xPY%x" ), auxOrigin.x, auxOrigin.y );
2022-02-04 22:44:59 +00:00
text.Printf( wxT( "%%TF.SameCoordinates,%s*%%" ), registration_id.GetData() );
aPlotter->AddLineToHeader( makeStringCompatX1( text, aUseX1CompatibilityMode ) );
}
2021-07-21 23:14:56 +00:00
void AddGerberX2Attribute( PLOTTER* aPlotter, const BOARD* aBoard, int aLayer,
2021-07-19 23:56:05 +00:00
bool aUseX1CompatibilityMode )
{
AddGerberX2Header( aPlotter, aBoard, aUseX1CompatibilityMode );
wxString text;
// Add the TF.FileFunction
text = GetGerberFileFunctionAttribute( aBoard, aLayer );
aPlotter->AddLineToHeader( makeStringCompatX1( text, aUseX1CompatibilityMode ) );
// Add the TF.FilePolarity (for layers which support that)
text = GetGerberFilePolarityAttribute( aLayer );
if( !text.IsEmpty() )
aPlotter->AddLineToHeader( makeStringCompatX1( text, aUseX1CompatibilityMode ) );
}
2014-06-30 06:44:46 +00:00
void BuildPlotFileName( wxFileName* aFilename, const wxString& aOutputDir,
const wxString& aSuffix, const wxString& aExtension )
2012-08-29 16:59:50 +00:00
{
// aFilename contains the base filename only (without path and extension)
// when calling this function.
// It is expected to be a valid filename (this is usually the board filename)
2012-08-29 16:59:50 +00:00
aFilename->SetPath( aOutputDir );
// Set the file extension
aFilename->SetExt( aExtension );
// remove leading and trailing spaces if any from the suffix, if
// something survives add it to the name;
// also the suffix can contain some not allowed chars in filename (/ \ . : and some others),
// so change them to underscore
// Remember it can be called from a python script, so the illegal chars
// have to be filtered here.
wxString suffix = aSuffix;
suffix.Trim( true );
suffix.Trim( false );
wxString badchars = wxFileName::GetForbiddenChars(wxPATH_DOS);
badchars.Append( "%." );
for( unsigned ii = 0; ii < badchars.Len(); ii++ )
suffix.Replace( badchars[ii], wxT("_") );
if( !suffix.IsEmpty() )
aFilename->SetName( aFilename->GetName() + wxT( "-" ) + suffix );
}
2012-08-29 16:59:50 +00:00
PLOT_CONTROLLER::PLOT_CONTROLLER( BOARD* aBoard )
2012-08-29 16:59:50 +00:00
{
2021-07-19 23:56:05 +00:00
m_plotter = nullptr;
m_board = aBoard;
m_plotLayer = UNDEFINED_LAYER;
2012-08-29 16:59:50 +00:00
}
2012-08-29 16:59:50 +00:00
PLOT_CONTROLLER::~PLOT_CONTROLLER()
{
ClosePlot();
}
2022-01-23 12:56:11 +00:00
/*
* IMPORTANT: the locale during plots *MUST* be kept as C/POSIX using a LOCALE_IO object on the
* stack. This even when opening/closing the plotfile, as some drivers do I/O even then.
*/
2012-08-29 16:59:50 +00:00
void PLOT_CONTROLLER::ClosePlot()
{
LOCALE_IO toggle;
if( m_plotter )
{
m_plotter->EndPlot();
2020-04-14 12:25:00 +00:00
delete m_plotter->RenderSettings();
2012-08-29 16:59:50 +00:00
delete m_plotter;
2020-04-14 12:25:00 +00:00
2021-07-19 23:56:05 +00:00
m_plotter = nullptr;
2012-08-29 16:59:50 +00:00
}
}
2021-07-19 23:56:05 +00:00
bool PLOT_CONTROLLER::OpenPlotfile( const wxString& aSuffix, PLOT_FORMAT aFormat,
const wxString& aSheetDesc )
2012-08-29 16:59:50 +00:00
{
LOCALE_IO toggle;
2022-01-23 12:56:11 +00:00
// Save the current format: sadly some plot routines depends on this but the main reason
// is that the StartPlot method uses it to dispatch the plotter creation
GetPlotOptions().SetFormat( aFormat );
2012-08-29 16:59:50 +00:00
// Ensure that the previous plot is closed
ClosePlot();
2022-01-23 12:56:11 +00:00
// Now compute the full filename for the output and start the plot (after ensuring the
// output directory is OK).
std::function<bool( wxString* )> textResolver =
[&]( wxString* token ) -> bool
{
// Handles m_board->GetTitleBlock() *and* m_board->GetProject()
return m_board->ResolveTextVar( token, 0 );
};
wxString outputDirName = GetPlotOptions().GetOutputDirectory();
outputDirName = ExpandTextVars( outputDirName, &textResolver, nullptr, nullptr );
outputDirName = ExpandEnvVarSubstitutions( outputDirName, nullptr );
2012-08-29 16:59:50 +00:00
wxFileName outputDir = wxFileName::DirName( outputDirName );
wxString boardFilename = m_board->GetFileName();
if( EnsureFileDirectoryExists( &outputDir, boardFilename ) )
2012-08-29 16:59:50 +00:00
{
// outputDir contains now the full path of plot files
m_plotFile = boardFilename;
m_plotFile.SetPath( outputDir.GetPath() );
wxString fileExt = GetDefaultPlotExtension( aFormat );
2022-01-23 12:56:11 +00:00
// Gerber format *can* use layer-specific file extensions (this is no longer best
// practice as the official file ext is now .gbr).
2019-12-28 00:55:11 +00:00
if( GetPlotOptions().GetFormat() == PLOT_FORMAT::GERBER
&& GetPlotOptions().GetUseGerberProtelExtensions() )
2022-01-23 12:56:11 +00:00
{
fileExt = GetGerberProtelExtension( GetLayer() );
2022-01-23 12:56:11 +00:00
}
// Build plot filenames from the board name and layer names:
BuildPlotFileName( &m_plotFile, outputDir.GetPath(), aSuffix, fileExt );
2012-08-29 16:59:50 +00:00
m_plotter = StartPlotBoard( m_board, &GetPlotOptions(), ToLAYER_ID( GetLayer() ),
m_plotFile.GetFullPath(), aSheetDesc );
2012-08-29 16:59:50 +00:00
}
2021-07-19 23:56:05 +00:00
return ( m_plotter != nullptr );
}
2012-08-29 16:59:50 +00:00
bool PLOT_CONTROLLER::PlotLayer()
2012-08-29 16:59:50 +00:00
{
LOCALE_IO toggle;
// No plot open, nothing to do...
if( !m_plotter )
return false;
// Fully delegated to the parent
PlotOneBoardLayer( m_board, m_plotter, ToLAYER_ID( GetLayer() ), GetPlotOptions() );
2012-08-29 16:59:50 +00:00
return true;
}
2012-08-29 16:59:50 +00:00
void PLOT_CONTROLLER::SetColorMode( bool aColorMode )
{
if( !m_plotter )
return;
m_plotter->SetColorMode( aColorMode );
}
bool PLOT_CONTROLLER::GetColorMode()
{
if( !m_plotter )
return false;
return m_plotter->GetColorMode();
}