kicad/gerbview/rs274d.cpp

866 lines
25 KiB
C++
Raw Normal View History

2007-09-26 04:09:22 +00:00
/********************************************************/
/**** Routine de lecture et visu d'un fichier GERBER ****/
/********************************************************/
#include "fctsys.h"
#include "common.h"
#include "gerbview.h"
#include "pcbplot.h"
#include "protos.h"
2007-09-26 04:09:22 +00:00
#define IsNumber( x ) ( ( ( (x) >= '0' ) && ( (x) <='9' ) ) \
|| ( (x) == '-' ) || ( (x) == '+' ) || ( (x) == '.' ) )
/* Format Gerber : NOTES :
2007-09-26 04:09:22 +00:00
* Fonctions preparatoires:
* Gn =
* G01 interpolation lineaire ( trace de droites )
* G02,G20,G21 Interpolation circulaire , sens trigo < 0
* G03,G30,G31 Interpolation circulaire , sens trigo > 0
* G04 commentaire
* G06 Interpolation parabolique
* G07 Interpolation cubique
* G10 interpolation lineaire ( echelle 10x )
* G11 interpolation lineaire ( echelle 0.1x )
* G12 interpolation lineaire ( echelle 0.01x )
* G52 plot symbole reference par Dnn code
* G53 plot symbole reference par Dnn ; symbole tourne de -90 degres
* G54 Selection d'outil
* G55 Mode exposition photo
* G56 plot symbole reference par Dnn A code
* G57 affiche le symbole reference sur la console
* G58 plot et affiche le symbole reference sur la console
* G60 interpolation lineaire ( echelle 100x )
* G70 Unites = Inches
* G71 Unites = Millimetres
* G74 supprime interpolation circulaire sur 360 degre, revient a G01
* G75 Active interpolation circulaire sur 360 degre
* G90 Mode Coordonnees absolues
* G91 Mode Coordonnees Relatives
*
* Coordonnees X,Y
* X,Y sont suivies de + ou - et de m+n chiffres (non separes)
* m = partie entiere
* n = partie apres la virgule
* formats classiques : m = 2, n = 3 (format 2.3)
* m = 3, n = 4 (format 3.4)
* ex:
* G__ X00345Y-06123 D__*
*
* Outils et D_CODES
* numero d'outil ( identification des formes )
* 1 a 99 (classique)
* 1 a 999
* D_CODES:
*
* D01 ... D9 = codes d'action:
* D01 = activation de lumiere (baisser de plume) lors du d<EFBFBD>placement
* D02 = extinction de lumiere (lever de plume) lors du d<EFBFBD>placement
2007-09-26 04:09:22 +00:00
* D03 = Flash
* D09 = VAPE Flash
* D51 = precede par G54 -> Select VAPE
*
* D10 ... D255 = Indentification d'outils ( d'ouvertures )
* Ne sont pas tj dans l'ordre ( voir tableau dans PCBPLOT.H)
*/
// Type d'action du phototraceur:
2007-09-26 04:09:22 +00:00
#define GERB_ACTIVE_DRAW 1 // activation de lumiere ( baisser de plume)
#define GERB_STOP_DRAW 2 // extinction de lumiere ( lever de plume)
#define GERB_FLASH 3 // Flash
2007-09-26 04:09:22 +00:00
#define NEGATE( nb ) (nb) = -(nb)
/* Variables locales : */
static wxPoint LastPosition;
/* Routines Locales */
2007-09-26 04:09:22 +00:00
static void Append_1_Line_GERBER( int Dcode_index, WinEDA_GerberFrame* frame, wxDC* DC,
const wxPoint& startpoint, const wxPoint& endpoint,
int largeur );
static void Append_1_Flash_GERBER( int Dcode_index, WinEDA_GerberFrame* frame, wxDC* DC,
const wxPoint& pos, const wxSize& size, int forme );
static void Append_1_Flash_ROND_GERBER( int Dcode_index, WinEDA_GerberFrame* frame, wxDC* DC,
const wxPoint& pos, int diametre );
static void Append_1_SEG_ARC_GERBER( int Dcode_index,
WinEDA_GerberFrame* frame, wxDC* DC,
const wxPoint& startpoint, const wxPoint& endpoint,
const wxPoint& rel_center, int largeur,
bool trigo_sens, bool multiquadrant );
/****************************************************************/
2007-09-26 04:09:22 +00:00
static void Append_1_Flash_ROND_GERBER( int Dcode_tool,
WinEDA_GerberFrame* frame,
wxDC* DC, const wxPoint& pos, int diametre )
/****************************************************************/
2007-09-26 04:09:22 +00:00
/* Trace 1 flash ROND en position pos
2007-09-26 04:09:22 +00:00
*/
{
2007-09-26 04:09:22 +00:00
TRACK* track;
2007-09-26 04:09:22 +00:00
track = new TRACK( frame->m_Pcb );
2007-09-26 04:09:22 +00:00
track->Insert( frame->m_Pcb, NULL );
track->SetLayer( frame->GetPCBScreen()->m_Active_Layer );
2007-09-26 04:09:22 +00:00
track->m_Width = diametre;
track->m_Start = track->m_End = pos;
NEGATE( track->m_Start.y );
NEGATE( track->m_End.y );
2007-10-13 06:18:44 +00:00
track->SetNet( Dcode_tool );
2007-09-26 04:09:22 +00:00
track->m_Shape = S_SPOT_CIRCLE;
Trace_Segment( frame->DrawPanel, DC, track, GR_OR );
}
2007-09-26 04:09:22 +00:00
/**********************************************************************/
2007-09-26 04:09:22 +00:00
static void Append_1_Flash_GERBER( int Dcode_index,
WinEDA_GerberFrame* frame, wxDC* DC,
const wxPoint& pos, const wxSize& size, int forme )
/*********************************************************************/
2007-09-26 04:09:22 +00:00
/*
2007-09-26 04:09:22 +00:00
* Trace 1 flash rectangulaire ou ovale vertical ou horizontal
* donne par son centre et ses dimensions X et Y
*/
{
2007-09-26 04:09:22 +00:00
TRACK* track;
int width, len;
width = MIN( size.x, size.y );
len = MAX( size.x, size.y ) - width;
track = new TRACK( frame->m_Pcb );
track->Insert( frame->m_Pcb, NULL );
track->SetLayer( frame->GetPCBScreen()->m_Active_Layer );
2007-09-26 04:09:22 +00:00
track->m_Width = width;
track->m_Start = track->m_End = pos;
NEGATE( track->m_Start.y );
NEGATE( track->m_End.y );
2007-10-13 06:18:44 +00:00
track->SetNet( Dcode_index );
2007-09-26 04:09:22 +00:00
2008-01-05 17:30:56 +00:00
if( forme == PAD_OVAL )
2007-09-26 04:09:22 +00:00
track->m_Shape = S_SPOT_OVALE;
else
track->m_Shape = S_SPOT_RECT; // donc rectangle ou carr<72>
2007-09-26 04:09:22 +00:00
len >>= 1;
if( size.x > size.y ) // ovale / rect horizontal
{
track->m_Start.x -= len;
track->m_End.x += len;
}
else // ovale / rect vertical
{
track->m_Start.y -= len;
track->m_End.y += len;
}
Trace_Segment( frame->DrawPanel, DC, track, GR_OR );
}
/******************************************************************/
2007-09-26 04:09:22 +00:00
static void Append_1_Line_GERBER( int Dcode_index,
WinEDA_GerberFrame* frame, wxDC* DC,
const wxPoint& startpoint, const wxPoint& endpoint,
int largeur )
/********************************************************************/
{
2007-09-26 04:09:22 +00:00
TRACK* track;
2007-09-26 04:09:22 +00:00
track = new TRACK( frame->m_Pcb );
2007-09-26 04:09:22 +00:00
track->Insert( frame->m_Pcb, NULL );
track->SetLayer( frame->GetPCBScreen()->m_Active_Layer );
2007-09-26 04:09:22 +00:00
track->m_Width = largeur;
track->m_Start = startpoint;
NEGATE( track->m_Start.y );
track->m_End = endpoint;
NEGATE( track->m_End.y );
2007-10-13 06:18:44 +00:00
track->SetNet( Dcode_index );
2007-09-26 04:09:22 +00:00
Trace_Segment( frame->DrawPanel, DC, track, GR_OR );
}
2007-09-26 04:09:22 +00:00
/*****************************************************************/
2007-09-26 04:09:22 +00:00
static void Append_1_SEG_ARC_GERBER( int Dcode_index,
WinEDA_GerberFrame* frame, wxDC* DC,
const wxPoint& startpoint, const wxPoint& endpoint,
const wxPoint& rel_center, int largeur,
bool trigo_sens, bool multiquadrant )
/*****************************************************************/
/* creation d'un arc:
2007-09-26 04:09:22 +00:00
* si multiquadrant == TRUE arc de 0 a 360 degres
* et rel_center est la coordonn<EFBFBD>e du centre relativement au startpoint
2007-09-26 04:09:22 +00:00
*
* si multiquadrant == FALSE arc de 0 <EFBFBD> 90 entierement contenu dans le meme quadrant
* et rel_center est la coordonn<EFBFBD>e du centre relativement au startpoint,
2007-09-26 04:09:22 +00:00
* mais en VALEUR ABSOLUE et le signe des valeurs x et y de rel_center doit
* etre deduit de cette limite de 90 degres
*
*/
{
2007-09-26 04:09:22 +00:00
TRACK* track;
wxPoint center, delta;
track = new TRACK( frame->m_Pcb );
track->Insert( frame->m_Pcb, NULL );
track->m_Shape = S_ARC;
track->SetLayer( frame->GetPCBScreen()->m_Active_Layer );
2007-09-26 04:09:22 +00:00
track->m_Width = largeur;
if( multiquadrant )
{
center.x = startpoint.x + rel_center.x;
center.y = startpoint.y - rel_center.y;
if( !trigo_sens )
{
track->m_Start = startpoint;
track->m_End = endpoint;
}
else
{
track->m_Start = endpoint;
track->m_End = startpoint;
}
}
else
{
center = rel_center;
delta.x = endpoint.x - startpoint.x;
delta.y = endpoint.y - startpoint.y;
// il faut corriger de signe de rel_center.x et rel_center.y
// selon le quadrant ou on se trouve
if( (delta.x >= 0) && (delta.y >= 0) ) // 1er quadrant
{
center.x = -center.x;
}
else if( (delta.x < 0) && (delta.y >= 0) ) // 2eme quadrant
{
center.x = -center.x;
center.y = -center.y;
}
else if( (delta.x < 0) && (delta.y < 0) ) // 3eme quadrant
{
center.y = -center.y;
}
else // 4eme qadrant: les 2 coord sont >= 0!
{
}
center.x += startpoint.x;
center.y = startpoint.y + center.y;
if( trigo_sens )
{
track->m_Start = startpoint;
track->m_End = endpoint;
}
else
{
track->m_Start = endpoint;
track->m_End = startpoint;
}
}
2007-10-13 06:18:44 +00:00
track->SetNet( Dcode_index );
2007-09-26 04:09:22 +00:00
track->m_Param = center.x;
2007-10-13 06:18:44 +00:00
track->SetSubNet( center.y );
2007-09-26 04:09:22 +00:00
NEGATE( track->m_Start.y );
NEGATE( track->m_End.y );
2007-10-13 06:18:44 +00:00
//NEGATE( track->GetSubNet() );
track->SetSubNet( -track->GetSubNet() );
2007-09-26 04:09:22 +00:00
Trace_Segment( frame->DrawPanel, DC, track, GR_OR );
}
2007-09-26 04:09:22 +00:00
/**************************************************/
/* Routines utilis<69>es en lecture de ficher gerber */
2007-09-26 04:09:22 +00:00
/**************************************************/
/* ces routines lisent la chaine de texte point<6E>e par Text.
2007-09-26 04:09:22 +00:00
* Apres appel, Text pointe le debut de la sequence non lue
*/
/***********************************************/
2007-09-26 04:09:22 +00:00
wxPoint GERBER_Descr::ReadXYCoord( char*& Text )
/***********************************************/
2007-09-26 04:09:22 +00:00
/* Retourne la coord courante pointee par Text (XnnnnYmmmm)
2007-09-26 04:09:22 +00:00
*/
{
2007-09-26 04:09:22 +00:00
wxPoint pos = m_CurrentPos;
int type_coord = 0, current_coord, nbchar;
bool is_float = FALSE;
char* text;
char line[256];
if( m_Relative )
pos.x = pos.y = 0;
else
pos = m_CurrentPos;
if( Text == NULL )
return pos;
text = line;
while( *Text )
{
if( (*Text == 'X') || (*Text == 'Y') )
{
type_coord = *Text;
Text++;
text = line; nbchar = 0;
while( IsNumber( *Text ) )
{
if( *Text == '.' )
is_float = TRUE;
*(text++) = *(Text++);
if( (*Text >= '0') && (*Text <='9') )
nbchar++;
}
*text = 0;
if( is_float )
{
if( m_GerbMetric )
current_coord = (int) round( atof( line ) / 0.00254 );
else
current_coord = (int) round( atof( line ) * PCB_INTERNAL_UNIT );
}
else
{
int fmt_scale = (type_coord == 'X') ? m_FmtScale.x : m_FmtScale.y;
if( m_NoTrailingZeros )
{
int min_digit = (type_coord == 'X') ? m_FmtLen.x : m_FmtLen.y;
while( nbchar < min_digit )
{
*(text++) = '0'; nbchar++;
}
*text = 0;
}
current_coord = atoi( line );
double real_scale = 1.0;
switch( fmt_scale )
{
case 0:
real_scale = 10000.0;
break;
case 1:
real_scale = 1000.0;
break;
case 2:
real_scale = 100.0;
break;
case 3:
real_scale = 10.0;
break;
case 4:
break;
case 5:
real_scale = 0.1;
break;
case 6:
real_scale = 0.01;
break;
case 7:
real_scale = 0.001;
break;
case 8:
real_scale = 0.0001;
break;
case 9:
real_scale = 0.00001;
break;
}
if( m_GerbMetric )
real_scale = real_scale / 25.4;
current_coord = (int) round( current_coord * real_scale );
}
if( type_coord == 'X' )
pos.x = current_coord;
else if( type_coord == 'Y' )
pos.y = current_coord;
continue;
}
else
break;
}
if( m_Relative )
{
pos.x += m_CurrentPos.x;
pos.y += m_CurrentPos.y;
}
m_CurrentPos = pos;
return pos;
}
2007-09-26 04:09:22 +00:00
/************************************************/
2007-09-26 04:09:22 +00:00
wxPoint GERBER_Descr::ReadIJCoord( char*& Text )
/************************************************/
2007-09-26 04:09:22 +00:00
/* Retourne la coord type InnJnn courante pointee par Text (InnnnJmmmm)
* Ces coordonn<EFBFBD>es sont relatives, donc si une coord est absente, sa valeur
2007-09-26 04:09:22 +00:00
* par defaut est 0
*/
{
2007-09-26 04:09:22 +00:00
wxPoint pos( 0, 0 );
int type_coord = 0, current_coord, nbchar;
bool is_float = FALSE;
char* text;
char line[256];
if( Text == NULL )
return pos;
text = line;
while( *Text )
{
if( (*Text == 'I') || (*Text == 'J') )
{
type_coord = *Text;
Text++;
text = line; nbchar = 0;
while( IsNumber( *Text ) )
{
if( *Text == '.' )
is_float = TRUE;
*(text++) = *(Text++);
if( (*Text >= '0') && (*Text <='9') )
nbchar++;
}
*text = 0;
if( is_float )
{
if( m_GerbMetric )
current_coord = (int) round( atof( line ) / 0.00254 );
else
current_coord = (int) round( atof( line ) * PCB_INTERNAL_UNIT );
}
else
{
int fmt_scale = (type_coord == 'I') ? m_FmtScale.x : m_FmtScale.y;
if( m_NoTrailingZeros )
{
int min_digit = (type_coord == 'I') ? m_FmtLen.x : m_FmtLen.y;
while( nbchar < min_digit )
{
*(text++) = '0'; nbchar++;
}
*text = 0;
}
current_coord = atoi( line );
double real_scale = 1.0;
switch( fmt_scale )
{
case 0:
real_scale = 10000.0;
break;
case 1:
real_scale = 1000.0;
break;
case 2:
real_scale = 100.0;
break;
case 3:
real_scale = 10.0;
break;
case 4:
break;
case 5:
real_scale = 0.1;
break;
case 6:
real_scale = 0.01;
break;
case 7:
real_scale = 0.001;
break;
case 8:
real_scale = 0.0001;
break;
case 9:
real_scale = 0.00001;
break;
}
if( m_GerbMetric )
real_scale = real_scale / 25.4;
current_coord = (int) round( current_coord * real_scale );
}
if( type_coord == 'I' )
pos.x = current_coord;
else if( type_coord == 'J' )
pos.y = current_coord;
continue;
}
else
break;
}
m_IJPos = pos;
return pos;
}
2007-09-26 04:09:22 +00:00
/*****************************************************/
2007-09-26 04:09:22 +00:00
int GERBER_Descr::ReturnGCodeNumber( char*& Text )
/*****************************************************/
2007-09-26 04:09:22 +00:00
/* Lit la sequence Gnn et retourne la valeur nn
2007-09-26 04:09:22 +00:00
*/
{
2007-09-26 04:09:22 +00:00
int ii = 0;
char* text;
char line[1024];
if( Text == NULL )
return 0;
Text++;
text = line;
while( IsNumber( *Text ) )
{
*(text++) = *(Text++);
}
*text = 0;
ii = atoi( line );
return ii;
}
/**************************************************/
2007-09-26 04:09:22 +00:00
int GERBER_Descr::ReturnDCodeNumber( char*& Text )
/**************************************************/
2007-09-26 04:09:22 +00:00
/* Lit la sequence Dnn et retourne la valeur nn
2007-09-26 04:09:22 +00:00
*/
{
2007-09-26 04:09:22 +00:00
int ii = 0;
char* text;
char line[1024];
if( Text == NULL )
return 0;
Text++;
text = line;
while( IsNumber( *Text ) )
*(text++) = *(Text++);
*text = 0;
ii = atoi( line );
return ii;
}
2007-09-26 04:09:22 +00:00
/******************************************************************/
2007-09-26 04:09:22 +00:00
bool GERBER_Descr::Execute_G_Command( char*& text, int G_commande )
/******************************************************************/
{
2007-09-26 04:09:22 +00:00
switch( G_commande )
{
case GC_LINEAR_INTERPOL_1X:
m_Iterpolation = GERB_INTERPOL_LINEAR_1X;
break;
case GC_CIRCLE_NEG_INTERPOL:
m_Iterpolation = GERB_INTERPOL_ARC_NEG;
break;
case GC_CIRCLE_POS_INTERPOL:
m_Iterpolation = GERB_INTERPOL_ARC_POS;
break;
case GC_COMMENT:
text = NULL;
break;
case GC_LINEAR_INTERPOL_10X:
m_Iterpolation = GERB_INTERPOL_LINEAR_10X;
break;
case GC_LINEAR_INTERPOL_0P1X:
m_Iterpolation = GERB_INTERPOL_LINEAR_01X;
break;
case GC_LINEAR_INTERPOL_0P01X:
m_Iterpolation = GERB_INTERPOL_LINEAR_001X;
break;
case GC_SELECT_TOOL:
{
int D_commande = ReturnDCodeNumber( text );
if( D_commande < FIRST_DCODE )
return FALSE;
if( D_commande > (MAX_TOOLS - 1) )
D_commande = MAX_TOOLS - 1;
m_Current_Tool = D_commande;
D_CODE* pt_Dcode = ReturnToolDescr( m_Layer, D_commande );
if( pt_Dcode )
pt_Dcode->m_InUse = TRUE;
break;
}
case GC_SPECIFY_INCHES:
m_GerbMetric = FALSE; // FALSE = Inches, TRUE = metric
break;
case GC_SPECIFY_MILLIMETERS:
m_GerbMetric = TRUE; // FALSE = Inches, TRUE = metric
break;
case GC_TURN_OFF_360_INTERPOL:
m_360Arc_enbl = FALSE;
break;
case GC_TURN_ON_360_INTERPOL:
m_360Arc_enbl = TRUE;
break;
case GC_SPECIFY_ABSOLUES_COORD:
m_Relative = FALSE; // FALSE = absolute Coord, RUE = relative Coord
break;
case GC_SPECIFY_RELATIVEES_COORD:
m_Relative = TRUE; // FALSE = absolute Coord, RUE = relative Coord
break;
case GC_TURN_ON_POLY_FILL:
m_PolygonFillMode = TRUE;
break;
case GC_TURN_OFF_POLY_FILL:
m_PolygonFillMode = FALSE;
m_PolygonFillModeState = 0;
break;
case GC_MOVE: // Non existant
default:
{
wxString msg; msg.Printf( wxT( "G%.2d command not handled" ), G_commande );
DisplayError( NULL, msg );
return FALSE;
}
}
return TRUE;
}
2007-09-26 04:09:22 +00:00
/*****************************************************************************/
2007-09-26 04:09:22 +00:00
bool GERBER_Descr::Execute_DCODE_Command( WinEDA_GerberFrame* frame, wxDC* DC,
char*& text, int D_commande )
/*****************************************************************************/
{
2007-09-26 04:09:22 +00:00
wxSize size( 15, 15 );
int shape = 1, dcode = 0;
D_CODE* pt_Tool = NULL;
wxString msg;
if( D_commande >= FIRST_DCODE ) // This is a "Set tool" command
{
if( D_commande > (MAX_TOOLS - 1) )
D_commande = MAX_TOOLS - 1;
m_Current_Tool = D_commande;
D_CODE* pt_Dcode = ReturnToolDescr( m_Layer, D_commande );
if( pt_Dcode )
pt_Dcode->m_InUse = TRUE;
return TRUE;
}
else // D_commande = 0..9: this is a pen command (usualy D1, D2 or D3)
{
m_Last_Pen_Command = D_commande;
}
if( m_PolygonFillMode ) // Enter a polygon description:
{
switch( D_commande )
{
case 1: //code D01 Draw line, exposure ON
{
SEGZONE* edge_poly, * last;
edge_poly = new SEGZONE( frame->m_Pcb );
last = (SEGZONE*) frame->m_Pcb->m_Zone;
if( last )
while( last->Pnext )
last = (SEGZONE*) last->Pnext;
edge_poly->Insert( frame->m_Pcb, last );
edge_poly->SetLayer( frame->GetPCBScreen()->m_Active_Layer );
2007-09-26 04:09:22 +00:00
edge_poly->m_Width = 1;
edge_poly->m_Start = m_PreviousPos;
NEGATE( edge_poly->m_Start.y );
edge_poly->m_End = m_CurrentPos;
NEGATE( edge_poly->m_End.y );
2007-10-13 06:18:44 +00:00
edge_poly->SetNet( m_PolygonFillModeState );
2007-09-26 04:09:22 +00:00
m_PreviousPos = m_CurrentPos;
m_PolygonFillModeState = 1;
break;
}
case 2: //code D2: exposure OFF (i.e. "move to")
m_PreviousPos = m_CurrentPos;
m_PolygonFillModeState = 0;
break;
default:
return FALSE;
}
}
else
switch( D_commande )
{
case 1: //code D01 Draw line, exposure ON
pt_Tool = ReturnToolDescr( m_Layer, m_Current_Tool );
if( pt_Tool )
{
size = pt_Tool->m_Size;
dcode = pt_Tool->m_Num_Dcode;
shape = pt_Tool->m_Shape;
}
switch( m_Iterpolation )
{
case GERB_INTERPOL_LINEAR_1X:
Append_1_Line_GERBER( dcode,
frame, DC,
m_PreviousPos, m_CurrentPos,
size.x );
break;
case GERB_INTERPOL_LINEAR_01X:
case GERB_INTERPOL_LINEAR_001X:
case GERB_INTERPOL_LINEAR_10X:
wxBell();
break;
case GERB_INTERPOL_ARC_NEG:
Append_1_SEG_ARC_GERBER( dcode,
frame, DC,
m_PreviousPos, m_CurrentPos, m_IJPos,
size.x, FALSE, m_360Arc_enbl );
break;
case GERB_INTERPOL_ARC_POS:
Append_1_SEG_ARC_GERBER( dcode,
frame, DC,
m_PreviousPos, m_CurrentPos, m_IJPos,
size.x, TRUE, m_360Arc_enbl );
break;
default:
msg.Printf( wxT( "Execute_DCODE_Command: interpol error (type %X)" ),
m_Iterpolation );
DisplayError( frame, msg );
break;
}
m_PreviousPos = m_CurrentPos;
break;
case 2: //code D2: exposure OFF (i.e. "move to")
m_PreviousPos = m_CurrentPos;
break;
case 3: // code D3: flash aperture
pt_Tool = ReturnToolDescr( m_Layer, m_Current_Tool );
if( pt_Tool )
{
size = pt_Tool->m_Size;
dcode = pt_Tool->m_Num_Dcode;
shape = pt_Tool->m_Shape;
}
switch( shape )
{
case GERB_LINE:
case GERB_CIRCLE:
Append_1_Flash_ROND_GERBER( dcode,
frame, DC,
m_CurrentPos,
size.x );
break;
case GERB_OVALE:
Append_1_Flash_GERBER( dcode,
frame, DC, m_CurrentPos,
size,
2008-01-05 17:30:56 +00:00
PAD_OVAL );
2007-09-26 04:09:22 +00:00
break;
case GERB_RECT:
Append_1_Flash_GERBER( dcode,
frame, DC, m_CurrentPos,
size,
2008-01-05 17:30:56 +00:00
PAD_RECT );
2007-09-26 04:09:22 +00:00
break;
default: // Special (Macro) : Non implant<6E>
2007-09-26 04:09:22 +00:00
break;
}
m_PreviousPos = m_CurrentPos;
break;
default:
return FALSE;
}
return TRUE;
}