kicad/pcbnew/class_module.cpp

1278 lines
37 KiB
C++
Raw Normal View History

/****************************************************/
/* class_module.cpp : fonctions de la classe MODULE */
/****************************************************/
#include "fctsys.h"
#include "gr_basic.h"
#include "wxstruct.h"
#include "common.h"
#include "plot_common.h"
#include "pcbnew.h"
#include "trigo.h"
#ifdef PCBNEW
#include "autorout.h"
#include "drag.h"
#endif
#ifdef CVPCB
#include "cvpcb.h"
#endif
#include "3d_struct.h"
#include "protos.h"
#define MAX_WIDTH 10000 // Epaisseur (en 1/10000 ") max raisonnable des traits, textes...
/*********************************************************************************/
void MODULE::DrawAncre( WinEDA_DrawPanel* panel, wxDC* DC, const wxPoint& offset,
int dim_ancre, int draw_mode )
/*********************************************************************************/
/* trace de l'ancre (croix verticale)
* (doit etre fait apres les pads,
* car le trace du trou efface tout donc peut etre l'ancre */
{
int zoom = panel->GetZoom();
int anchor_size = dim_ancre * zoom;
GRSetDrawMode( DC, draw_mode );
if( (g_AnchorColor & ITEM_NOT_SHOW) == 0 )
{
GRLine( &panel->m_ClipBox, DC,
m_Pos.x - offset.x - anchor_size, m_Pos.y - offset.y,
m_Pos.x - offset.x + anchor_size, m_Pos.y - offset.y,
0, g_AnchorColor );
GRLine( &panel->m_ClipBox, DC,
m_Pos.x - offset.x, m_Pos.y - offset.y - anchor_size,
m_Pos.x - offset.x, m_Pos.y - offset.y + anchor_size,
0, g_AnchorColor );
}
}
/*************************************************/
/* Class MODULE : description d'un composant pcb */
/*************************************************/
/* Constructeur de la classe MODULE */
2007-08-23 04:28:46 +00:00
MODULE::MODULE( BOARD* parent ) :
BOARD_ITEM( parent, TYPEMODULE )
{
m_Pads = NULL;
m_Drawings = NULL;
m_3D_Drawings = NULL;
m_Attributs = MOD_DEFAULT;
m_Layer = CMP_N;
m_Orient = 0;
m_ModuleStatus = 0;
flag = 0;
m_CntRot90 = m_CntRot180 = 0;
m_Surface = 0;
m_Link = 0;
m_LastEdit_Time = time( NULL );
m_Reference = new TEXTE_MODULE( this, TEXT_is_REFERENCE );
m_Reference->Pback = this;
m_Value = new TEXTE_MODULE( this, TEXT_is_VALUE );
m_Value->Pback = this;
m_3D_Drawings = new Struct3D_Master( this );
}
/* Destructeur */
2007-09-01 12:00:30 +00:00
MODULE::~MODULE()
{
D_PAD* Pad;
EDA_BaseStruct* Struct, * NextStruct;
delete m_Reference;
delete m_Value;
for( Struct = m_3D_Drawings; Struct != NULL; Struct = NextStruct )
{
NextStruct = Struct->Pnext;
delete Struct;
}
/* effacement des pads */
for( Pad = m_Pads; Pad != NULL; Pad = (D_PAD*) NextStruct )
{
NextStruct = Pad->Pnext;
delete Pad;
}
/* effacement des elements de trace */
for( Struct = m_Drawings; Struct != NULL; Struct = NextStruct )
{
NextStruct = Struct->Pnext;
2007-09-01 12:00:30 +00:00
switch( (Struct->Type()) )
{
case TYPEEDGEMODULE:
delete (EDGE_MODULE*) Struct;
break;
case TYPETEXTEMODULE:
delete (TEXTE_MODULE*) Struct;
break;
default:
DisplayError( NULL, wxT( "Warn: ItemType not handled in delete MODULE" ) );
NextStruct = NULL;
break;
}
}
}
/*********************************/
void MODULE::Copy( MODULE* Module )
/*********************************/
{
D_PAD* pad, * lastpad;
m_Pos = Module->m_Pos;
m_Layer = Module->m_Layer;
m_LibRef = Module->m_LibRef;
m_Attributs = Module->m_Attributs;
m_Orient = Module->m_Orient;
m_BoundaryBox = Module->m_BoundaryBox;
m_PadNum = Module->m_PadNum;
m_CntRot90 = Module->m_CntRot90;
m_CntRot180 = Module->m_CntRot180;
m_LastEdit_Time = Module->m_LastEdit_Time;
m_TimeStamp = GetTimeStamp();
/* Copy des structures auxiliaires: Reference et value */
m_Reference->Copy( Module->m_Reference );
m_Value->Copy( Module->m_Value );
/* Copie des structures auxiliaires: Pads */
lastpad = NULL; pad = Module->m_Pads;
for( ; pad != NULL; pad = (D_PAD*) pad->Pnext )
{
D_PAD* newpad = new D_PAD( this );
newpad->Copy( pad );
if( m_Pads == NULL )
{
newpad->Pback = this;
m_Pads = (D_PAD*) newpad;
}
else
{
newpad->Pback = lastpad;
lastpad->Pnext = newpad;
}
lastpad = newpad;
}
/* Copy des structures auxiliaires: Drawings */
2007-08-23 04:28:46 +00:00
BOARD_ITEM* OldStruct = Module->m_Drawings;
BOARD_ITEM* NewStruct, * LastStruct = NULL;
for( ; OldStruct; OldStruct = OldStruct->Next() )
{
NewStruct = NULL;
2007-09-01 12:00:30 +00:00
switch( OldStruct->Type() )
{
case TYPETEXTEMODULE:
NewStruct = new TEXTE_MODULE( this );
( (TEXTE_MODULE*) NewStruct )->Copy( (TEXTE_MODULE*) OldStruct );
break;
case TYPEEDGEMODULE:
NewStruct = new EDGE_MODULE( this );
( (EDGE_MODULE*) NewStruct )->Copy( (EDGE_MODULE*) OldStruct );
break;
default:
DisplayError( NULL, wxT( "Internal Err: CopyModule: type indefini" ) );
break;
}
if( NewStruct == NULL )
break;
if( m_Drawings == NULL )
{
NewStruct->Pback = this;
m_Drawings = NewStruct;
}
else
{
NewStruct->Pback = LastStruct;
LastStruct->Pnext = NewStruct;
}
LastStruct = NewStruct;
}
/* Copy des elements complementaires Drawings 3D */
m_3D_Drawings->Copy( Module->m_3D_Drawings );
Struct3D_Master* Struct3D, * NewStruct3D, * CurrStruct3D;
Struct3D = (Struct3D_Master*) Module->m_3D_Drawings->Pnext;
CurrStruct3D = m_3D_Drawings;
for( ; Struct3D != NULL; Struct3D = (Struct3D_Master*) Struct3D->Pnext )
{
NewStruct3D = new Struct3D_Master( this );
NewStruct3D->Copy( Struct3D );
CurrStruct3D->Pnext = NewStruct3D;
NewStruct3D->Pback = CurrStruct3D;
CurrStruct3D = NewStruct3D;
}
/* Copie des elements complementaires */
m_Doc = Module->m_Doc;
m_KeyWord = Module->m_KeyWord;
}
/* supprime du chainage la structure Struct
* les structures arrieres et avant sont chainees directement
*/
2007-09-01 12:00:30 +00:00
void MODULE::UnLink()
{
/* Modification du chainage arriere */
if( Pback )
{
2007-09-01 12:00:30 +00:00
if( Pback->Type() != TYPEPCB )
{
Pback->Pnext = Pnext;
}
else /* Le chainage arriere pointe sur la structure "Pere" */
{
if( GetState( DELETED ) ) // A REVOIR car Pback = NULL si place en undelete
{
2007-11-05 07:07:00 +00:00
if( g_UnDeleteStackPtr )
2007-09-01 12:00:30 +00:00
g_UnDeleteStack[g_UnDeleteStackPtr - 1] = Next();
}
else
( (BOARD*) Pback )->m_Modules = (MODULE*) Pnext;
}
}
/* Modification du chainage avant */
if( Pnext )
Pnext->Pback = Pback;
Pnext = Pback = NULL;
}
/**********************************************************/
void MODULE::Draw( WinEDA_DrawPanel* panel, wxDC* DC,
const wxPoint& offset, int draw_mode )
/**********************************************************/
/* Dessin d'une empreinte sur l'ecran actif:
* Entree :
* Module: pointeur sur le module
* ox, oy = offset de trace
* draw_mode = mode de trace ( GR_OR, GR_XOR, GR_AND)
* Utilise par ailleur:
* Description des parametres de l'empreinte calcules par caract() ;
*/
{
D_PAD* pt_pad;
EDA_BaseStruct* PtStruct;
TEXTE_MODULE* PtTexte;
/* trace des pastilles */
pt_pad = m_Pads;
for( ; pt_pad != NULL; pt_pad = (D_PAD*) pt_pad->Pnext )
{
if( pt_pad->m_Flags & IS_MOVED )
continue;
pt_pad->Draw( panel, DC, offset, draw_mode );
}
/* Impression de l'ancre du module */
DrawAncre( panel, DC, offset, DIM_ANCRE_MODULE, draw_mode );
/* impression des graphismes */
if( !(m_Reference->m_Flags & IS_MOVED) )
m_Reference->Draw( panel, DC, offset, draw_mode );
if( !(m_Value->m_Flags & IS_MOVED) )
m_Value->Draw( panel, DC, offset, draw_mode );
PtStruct = m_Drawings;
for( ; PtStruct != NULL; PtStruct = PtStruct->Pnext )
{
if( PtStruct->m_Flags & IS_MOVED )
continue;
2007-09-01 12:00:30 +00:00
switch( PtStruct->Type() )
{
case TYPETEXTEMODULE:
PtTexte = (TEXTE_MODULE*) PtStruct;
PtTexte->Draw( panel, DC, offset, draw_mode );
break;
case TYPEEDGEMODULE:
( (EDGE_MODULE*) PtStruct )->Draw( panel, DC, offset, draw_mode );
break;
default:
break;
}
}
}
/**************************************************************/
void MODULE::DrawEdgesOnly( WinEDA_DrawPanel* panel, wxDC* DC,
const wxPoint& offset, int draw_mode )
/**************************************************************/
{
EDA_BaseStruct* PtStruct;
/* impression des graphismes */
PtStruct = m_Drawings;
for( ; PtStruct != NULL; PtStruct = PtStruct->Pnext )
{
2007-09-01 12:00:30 +00:00
switch( PtStruct->Type() )
{
case TYPEEDGEMODULE:
( (EDGE_MODULE*) PtStruct )->Draw( panel, DC, offset, draw_mode );
break;
default:
break;
}
}
}
2007-10-30 21:30:58 +00:00
bool MODULE::Save( FILE* aFile ) const
{
char statusTxt[8];
BOARD_ITEM* item;
if( GetState( DELETED ) )
return true;
bool rc = false;
fprintf( aFile, "$MODULE %s\n", CONV_TO_UTF8( m_LibRef ) );
// Generation des coord et caracteristiques
memset( statusTxt, 0, sizeof(statusTxt) );
if( IsLocked() )
statusTxt[0] = 'F';
else
statusTxt[0] = '~';
if( m_ModuleStatus & MODULE_is_PLACED )
statusTxt[1] = 'P';
else
statusTxt[1] = '~';
fprintf( aFile, "Po %d %d %d %d %8.8lX %8.8lX %s\n",
m_Pos.x, m_Pos.y,
m_Orient, m_Layer, m_LastEdit_Time,
m_TimeStamp, statusTxt );
fprintf( aFile, "Li %s\n", CONV_TO_UTF8( m_LibRef ) );
if( !m_Doc.IsEmpty() )
{
fprintf( aFile, "Cd %s\n", CONV_TO_UTF8( m_Doc ) );
}
if( !m_KeyWord.IsEmpty() )
{
fprintf( aFile, "Kw %s\n", CONV_TO_UTF8( m_KeyWord ) );
}
2007-10-30 21:30:58 +00:00
fprintf( aFile, "Sc %8.8lX\n", m_TimeStamp );
fprintf( aFile, "Op %X %X 0\n", m_CntRot90, m_CntRot180 );
// attributes
if( m_Attributs != MOD_DEFAULT )
{
fprintf( aFile, "At " );
if( m_Attributs & MOD_CMS )
fprintf( aFile, "SMD " );
if( m_Attributs & MOD_VIRTUAL )
fprintf( aFile, "VIRTUAL " );
fprintf( aFile, "\n" );
}
// save reference
if( !m_Reference->Save( aFile ) )
goto out;
// save value
if( !m_Value->Save( aFile ) )
goto out;
// save drawing elements
for( item=m_Drawings; item; item=item->Next() )
{
switch( item->Type() )
{
case TYPETEXTEMODULE:
case TYPEEDGEMODULE:
if( !item->Save( aFile ) )
goto out;
break;
default:
#if defined(DEBUG)
printf( "MODULE::Save() ignoring type %d\n", item->Type() );
#endif
break;
}
}
// save the pads
for( item=m_Pads; item; item=item->Next() )
if( !item->Save( aFile ) )
goto out;
// Generation des informations de trac<61>3D
Write_3D_Descr( aFile );
fprintf( aFile, "$EndMODULE %s\n", CONV_TO_UTF8( m_LibRef ) );
rc = true;
out:
return rc;
}
/***************************************/
2007-10-30 21:30:58 +00:00
int MODULE::Write_3D_Descr( FILE* File ) const
/***************************************/
/* Sauvegarde de la description 3D du MODULE
*/
{
char buf[512];
Struct3D_Master* Struct3D = m_3D_Drawings;
for( ; Struct3D != NULL; Struct3D = (Struct3D_Master*) Struct3D->Pnext )
{
if( !Struct3D->m_Shape3DName.IsEmpty() )
{
fprintf( File, "$SHAPE3D\n" );
fprintf( File, "Na \"%s\"\n", CONV_TO_UTF8( Struct3D->m_Shape3DName ) );
sprintf( buf, "Sc %lf %lf %lf\n",
Struct3D->m_MatScale.x,
Struct3D->m_MatScale.y,
Struct3D->m_MatScale.z );
fprintf( File, to_point( buf ) );
sprintf( buf, "Of %lf %lf %lf\n",
Struct3D->m_MatPosition.x,
Struct3D->m_MatPosition.y,
Struct3D->m_MatPosition.z );
fprintf( File, to_point( buf ) );
sprintf( buf, "Ro %lf %lf %lf\n",
Struct3D->m_MatRotation.x,
Struct3D->m_MatRotation.y,
Struct3D->m_MatRotation.z );
fprintf( File, to_point( buf ) );
fprintf( File, "$EndSHAPE3D\n" );
}
}
return 0;
}
/****************************************************/
int MODULE::Read_3D_Descr( FILE* File, int* LineNum )
/****************************************************/
/* Lecture de la description d'un MODULE (format Ascii)
* la 1ere ligne de descr ($MODULE) est supposee etre deja lue
* retourne 0 si OK
*/
{
char Line[1024];
char* text = Line + 3;
Struct3D_Master* Struct3D = m_3D_Drawings;
if( !Struct3D->m_Shape3DName.IsEmpty() )
{
Struct3D_Master* NewStruct3D;
while( Struct3D->Pnext )
Struct3D = (Struct3D_Master*) Struct3D->Pnext;
Struct3D->Pnext = NewStruct3D = new Struct3D_Master( this );
NewStruct3D->Pback = Struct3D;
Struct3D = NewStruct3D;
}
while( GetLine( File, Line, LineNum, sizeof(Line) - 1 ) != NULL )
{
switch( Line[0] )
{
case '$': // Fin de description
if( Line[1] == 'E' )
return 0;
return 1;
case 'N': // Shape File Name
{
char buf[512];
ReadDelimitedText( buf, text, 512 );
Struct3D->m_Shape3DName = CONV_FROM_UTF8( buf );
break;
}
case 'S': // Scale
sscanf( text, "%lf %lf %lf\n",
&Struct3D->m_MatScale.x,
&Struct3D->m_MatScale.y,
&Struct3D->m_MatScale.z );
break;
case 'O': // Offset
sscanf( text, "%lf %lf %lf\n",
&Struct3D->m_MatPosition.x,
&Struct3D->m_MatPosition.y,
&Struct3D->m_MatPosition.z );
break;
case 'R': // Rotation
sscanf( text, "%lf %lf %lf\n",
&Struct3D->m_MatRotation.x,
&Struct3D->m_MatRotation.y,
&Struct3D->m_MatRotation.z );
break;
default:
break;
}
}
return 1;
}
/**************************************************/
int MODULE::ReadDescr( FILE* File, int* LineNum )
/**************************************************/
/* Lecture de la description d'un MODULE (format Ascii)
* la 1ere ligne de descr ($MODULE) est supposee etre deja lue
* retourne 0 si OK
*/
{
D_PAD* LastPad = NULL, * ptpad;
EDA_BaseStruct* LastModStruct = NULL;
EDGE_MODULE* DrawSegm;
TEXTE_MODULE* DrawText;
char Line[256], BufLine[256], BufCar1[128], BufCar2[128], * PtLine;
int itmp1, itmp2;
while( GetLine( File, Line, LineNum, sizeof(Line) - 1 ) != NULL )
{
if( Line[0] == '$' )
{
if( Line[1] == 'E' )
break;
if( Line[1] == 'P' )
{
ptpad = new D_PAD( this );
ptpad->ReadDescr( File, LineNum );
RotatePoint( &ptpad->m_Pos.x, &ptpad->m_Pos.y, m_Orient );
ptpad->m_Pos.x += m_Pos.x;
ptpad->m_Pos.y += m_Pos.y;
if( LastPad == NULL )
{
ptpad->Pback = (EDA_BaseStruct*) this;
m_Pads = ptpad;
}
else
{
ptpad->Pback = (EDA_BaseStruct*) LastPad;
LastPad->Pnext = (EDA_BaseStruct*) ptpad;
}
LastPad = ptpad;
continue;
}
if( Line[1] == 'S' )
Read_3D_Descr( File, LineNum );
}
if( strlen( Line ) < 4 )
continue;
PtLine = Line + 3;
/* Pointe 1er code utile de la ligne */
switch( Line[0] )
{
case 'P':
memset( BufCar1, 0, sizeof(BufCar1) );
sscanf( PtLine, "%d %d %d %d %lX %lX %s",
&m_Pos.x, &m_Pos.y,
&m_Orient, &m_Layer,
&m_LastEdit_Time, &m_TimeStamp, BufCar1 );
m_ModuleStatus = 0;
if( BufCar1[0] == 'F' )
2007-09-09 02:27:56 +00:00
SetLocked(true);
if( BufCar1[1] == 'P' )
m_ModuleStatus |= MODULE_is_PLACED;
break;
case 'L': /* Li = Lecture du nom librairie du module */
*BufLine = 0;
sscanf( PtLine, " %s", BufLine );
m_LibRef = CONV_FROM_UTF8( BufLine );
break;
case 'S':
sscanf( PtLine, " %lX", &m_TimeStamp );
break;
case 'O': /* (Op)tions de placement auto */
itmp1 = itmp2 = 0;
sscanf( PtLine, " %X %X", &itmp1, &itmp2 );
m_CntRot180 = itmp2 & 0x0F;
if( m_CntRot180 > 10 )
m_CntRot180 = 10;
m_CntRot90 = itmp1 & 0x0F;
if( m_CntRot90 > 10 )
m_CntRot90 = 0;
itmp1 = (itmp1 >> 4) & 0x0F;
if( itmp1 > 10 )
itmp1 = 0;
m_CntRot90 |= itmp1 << 4;
break;
case 'A': /* At = (At)tributs du module */
if( strstr( PtLine, "SMD" ) )
m_Attributs |= MOD_CMS;
if( strstr( PtLine, "VIRTUAL" ) )
m_Attributs |= MOD_VIRTUAL;
break;
case 'T': /* lecture des textes modules */
sscanf( Line + 1, "%d", &itmp1 );
if( itmp1 == TEXT_is_REFERENCE )
DrawText = m_Reference;
else if( itmp1 == TEXT_is_VALUE )
DrawText = m_Value;
else /* text is a drawing */
{
DrawText = new TEXTE_MODULE( this );
if( LastModStruct == NULL )
{
DrawText->Pback = this;
2007-08-23 04:28:46 +00:00
m_Drawings = DrawText;
}
else
{
DrawText->Pback = LastModStruct;
LastModStruct->Pnext = DrawText;
}
2007-08-23 04:28:46 +00:00
LastModStruct = DrawText;
}
2007-08-23 04:28:46 +00:00
int layer;
sscanf( Line + 1, "%d %d %d %d %d %d %d %s %s %d",
&itmp1,
&DrawText->m_Pos0.x, &DrawText->m_Pos0.y,
&DrawText->m_Size.y, &DrawText->m_Size.x,
&DrawText->m_Orient, &DrawText->m_Width,
2007-08-23 04:28:46 +00:00
BufCar1, BufCar2, &layer );
DrawText->m_Type = itmp1;
DrawText->m_Orient -= m_Orient; // m_Orient texte relative au module
if( BufCar1[0] == 'M' )
DrawText->m_Miroir = 0;
else
DrawText->m_Miroir = 1;
if( BufCar2[0] == 'I' )
DrawText->m_NoShow = 1;
else
DrawText->m_NoShow = 0;
if( layer == COPPER_LAYER_N )
2007-08-23 04:28:46 +00:00
layer = SILKSCREEN_N_CU;
else if( layer == CMP_N )
layer = SILKSCREEN_N_CMP;
2007-08-23 04:28:46 +00:00
DrawText->SetLayer( layer );
/* calcul de la position vraie */
DrawText->SetDrawCoord();
/* Lecture de la chaine "text" */
ReadDelimitedText( BufLine, Line, sizeof(BufLine) );
DrawText->m_Text = CONV_FROM_UTF8( BufLine );
// Controle d'epaisseur raisonnable:
if( DrawText->m_Width <= 1 )
DrawText->m_Width = 1;
if( DrawText->m_Width > MAX_WIDTH )
DrawText->m_Width = MAX_WIDTH;
break;
case 'D': /* lecture du contour */
DrawSegm = new EDGE_MODULE( this );
if( LastModStruct == NULL )
{
DrawSegm->Pback = this;
m_Drawings = DrawSegm;
}
else
{
DrawSegm->Pback = LastModStruct;
LastModStruct->Pnext = DrawSegm;
}
LastModStruct = DrawSegm;
DrawSegm->ReadDescr( Line, File, LineNum );
DrawSegm->SetDrawCoord();
break;
case 'C': /* Lecture de la doc */
m_Doc = CONV_FROM_UTF8( StrPurge( PtLine ) );
break;
case 'K': /* Lecture de la liste des mots cle */
m_KeyWord = CONV_FROM_UTF8( StrPurge( PtLine ) );
break;
default:
break;
}
}
/* Recalcul de l'encadrement */
Set_Rectangle_Encadrement();
return 0;
}
/****************************************************/
void MODULE::SetPosition( const wxPoint& newpos )
/****************************************************/
// replace le module en position newpos
{
int deltaX = newpos.x - m_Pos.x;
int deltaY = newpos.y - m_Pos.y;
/* deplacement de l'ancre */
m_Pos.x += deltaX;
m_Pos.y += deltaY;
/* deplacement de la reference */
m_Reference->m_Pos.x += deltaX;
m_Reference->m_Pos.y += deltaY;
/* deplacement de la Valeur */
m_Value->m_Pos.x += deltaX;
m_Value->m_Pos.y += deltaY;
/* deplacement des pastilles */
D_PAD* pad = m_Pads;
for( ; pad != NULL; pad = (D_PAD*) pad->Pnext )
{
pad->m_Pos.x += deltaX;
pad->m_Pos.y += deltaY;
}
/* deplacement des dessins de l'empreinte : */
EDA_BaseStruct* PtStruct = m_Drawings;
for( ; PtStruct != NULL; PtStruct = PtStruct->Pnext )
{
2007-09-01 12:00:30 +00:00
switch( PtStruct->Type() )
{
case TYPEEDGEMODULE:
{
EDGE_MODULE* pt_edgmod = (EDGE_MODULE*) PtStruct;
pt_edgmod->SetDrawCoord();
break;
}
case TYPETEXTEMODULE:
{
TEXTE_MODULE* pt_texte = (TEXTE_MODULE*) PtStruct;
pt_texte->m_Pos.x += deltaX;
pt_texte->m_Pos.y += deltaY;
break;
}
default:
DisplayError( NULL, wxT( "Type Draw Indefini" ) ); break;
}
}
Set_Rectangle_Encadrement();
}
/*********************************************/
void MODULE::SetOrientation( int newangle )
/*********************************************/
/* Tourne de newangle (en 0.1 degres) le module
*/
{
int px, py;
newangle -= m_Orient; // = delta de rotation
m_Orient += newangle;
NORMALIZE_ANGLE_POS( m_Orient );
/* deplacement et rotation des pastilles */
D_PAD* pad = m_Pads;
for( ; pad != NULL; pad = (D_PAD*) pad->Pnext )
{
px = pad->m_Pos0.x;
py = pad->m_Pos0.y;
pad->m_Orient += newangle; /* change m_Orientation */
NORMALIZE_ANGLE_POS( pad->m_Orient );
RotatePoint( &px, &py, (int) m_Orient );
pad->m_Pos.x = m_Pos.x + px;
pad->m_Pos.y = m_Pos.y + py;
}
/* mise a jour de la reference et de la valeur*/
m_Reference->SetDrawCoord();
m_Value->SetDrawCoord();
/* deplacement des contours et textes de l'empreinte : */
EDA_BaseStruct* PtStruct = m_Drawings;
for( ; PtStruct != NULL; PtStruct = PtStruct->Pnext )
{
2007-09-01 12:00:30 +00:00
if( PtStruct->Type() == TYPEEDGEMODULE )
{
EDGE_MODULE* pt_edgmod = (EDGE_MODULE*) PtStruct;
pt_edgmod->SetDrawCoord();
}
2007-09-01 12:00:30 +00:00
if( PtStruct->Type() == TYPETEXTEMODULE )
{
/* deplacement des inscriptions : */
TEXTE_MODULE* pt_texte = (TEXTE_MODULE*) PtStruct;
pt_texte->SetDrawCoord();
}
}
/* Recalcul du rectangle d'encadrement */
Set_Rectangle_Encadrement();
}
/************************************************/
2007-09-01 12:00:30 +00:00
void MODULE::Set_Rectangle_Encadrement()
/************************************************/
/* Mise a jour du rectangle d'encadrement du module
* Entree : pointeur sur module
* Le rectangle d'encadrement est le rectangle comprenant les contours et les
* pads.
* Le rectangle est calcule:
* pour orient 0
* en coord relatives / position ancre
*/
{
EDGE_MODULE* pt_edge_mod;
D_PAD* pad;
int width;
int cx, cy, uxf, uyf, rayon;
int xmax, ymax;
/* Init des pointeurs */
pt_edge_mod = (EDGE_MODULE*) m_Drawings;
/* Init des coord du cadre a une valeur limite non nulle */
m_BoundaryBox.m_Pos.x = -500; xmax = 500;
m_BoundaryBox.m_Pos.y = -500; ymax = 500;
/* Contours: Recherche des coord min et max et mise a jour du cadre */
for( ; pt_edge_mod != NULL; pt_edge_mod = (EDGE_MODULE*) pt_edge_mod->Pnext )
{
2007-09-01 12:00:30 +00:00
if( pt_edge_mod->Type() != TYPEEDGEMODULE )
continue;
width = pt_edge_mod->m_Width / 2;
switch( pt_edge_mod->m_Shape )
{
case S_ARC:
case S_CIRCLE:
{
cx = pt_edge_mod->m_Start0.x; cy = pt_edge_mod->m_Start0.y; // centre
uxf = pt_edge_mod->m_End0.x; uyf = pt_edge_mod->m_End0.y;
rayon = (int) hypot( (double) (cx - uxf), (double) (cy - uyf) );
rayon += width;
2007-08-23 04:28:46 +00:00
m_BoundaryBox.m_Pos.x = MIN( m_BoundaryBox.m_Pos.x, cx - rayon );
m_BoundaryBox.m_Pos.y = MIN( m_BoundaryBox.m_Pos.y, cy - rayon );
xmax = MAX( xmax, cx + rayon );
ymax = MAX( ymax, cy + rayon );
break;
}
default:
2007-08-23 04:28:46 +00:00
m_BoundaryBox.m_Pos.x = MIN( m_BoundaryBox.m_Pos.x, pt_edge_mod->m_Start0.x - width );
m_BoundaryBox.m_Pos.x = MIN( m_BoundaryBox.m_Pos.x, pt_edge_mod->m_End0.x - width );
m_BoundaryBox.m_Pos.y = MIN( m_BoundaryBox.m_Pos.y, pt_edge_mod->m_Start0.y - width );
m_BoundaryBox.m_Pos.y = MIN( m_BoundaryBox.m_Pos.y, pt_edge_mod->m_End0.y - width );
xmax = MAX( xmax, pt_edge_mod->m_Start0.x + width );
xmax = MAX( xmax, pt_edge_mod->m_End0.x + width );
ymax = MAX( ymax, pt_edge_mod->m_Start0.y + width );
ymax = MAX( ymax, pt_edge_mod->m_End0.y + width );
break;
}
}
/* Pads: Recherche des coord min et max et mise a jour du cadre */
for( pad = m_Pads; pad != NULL; pad = (D_PAD*) pad->Pnext )
{
rayon = pad->m_Rayon;
cx = pad->m_Pos0.x; cy = pad->m_Pos0.y;
2007-08-23 04:28:46 +00:00
m_BoundaryBox.m_Pos.x = MIN( m_BoundaryBox.m_Pos.x, cx - rayon );
m_BoundaryBox.m_Pos.y = MIN( m_BoundaryBox.m_Pos.y, cy - rayon );
xmax = MAX( xmax, cx + rayon );
ymax = MAX( ymax, cy + rayon );
}
m_BoundaryBox.SetWidth( xmax - m_BoundaryBox.m_Pos.x );
m_BoundaryBox.SetHeight( ymax - m_BoundaryBox.m_Pos.y );
}
/****************************************/
2007-09-01 12:00:30 +00:00
void MODULE::SetRectangleExinscrit()
/****************************************/
/* Analogue a MODULE::Set_Rectangle_Encadrement() mais en coord reelles:
* Mise a jour du rectangle d'encadrement reel du module c.a.d en coord PCB
* Entree : pointeur sur module
* Le rectangle d'encadrement est le rectangle comprenant les contours et les
* pads.
* Met egalement a jour la surface (.m_Surface) du module.
*/
{
EDGE_MODULE* EdgeMod;
D_PAD* Pad;
int width;
int cx, cy, uxf, uyf, rayon;
int xmax, ymax;
m_RealBoundaryBox.m_Pos.x = xmax = m_Pos.x;
m_RealBoundaryBox.m_Pos.y = ymax = m_Pos.y;
/* Contours: Recherche des coord min et max et mise a jour du cadre */
EdgeMod = (EDGE_MODULE*) m_Drawings;
for( ; EdgeMod != NULL; EdgeMod = (EDGE_MODULE*) EdgeMod->Pnext )
{
2007-09-01 12:00:30 +00:00
if( EdgeMod->Type() != TYPEEDGEMODULE )
continue;
width = EdgeMod->m_Width / 2;
switch( EdgeMod->m_Shape )
{
case S_ARC:
case S_CIRCLE:
{
cx = EdgeMod->m_Start.x; cy = EdgeMod->m_Start.y; // centre
uxf = EdgeMod->m_End.x; uyf = EdgeMod->m_End.y;
rayon = (int) hypot( (double) (cx - uxf), (double) (cy - uyf) );
rayon += width;
2007-08-23 04:28:46 +00:00
m_RealBoundaryBox.m_Pos.x = MIN( m_RealBoundaryBox.m_Pos.x, cx - rayon );
m_RealBoundaryBox.m_Pos.y = MIN( m_RealBoundaryBox.m_Pos.y, cy - rayon );
xmax = MAX( xmax, cx + rayon );
ymax = MAX( ymax, cy + rayon );
break;
}
default:
2007-08-23 04:28:46 +00:00
m_RealBoundaryBox.m_Pos.x = MIN( m_RealBoundaryBox.m_Pos.x, EdgeMod->m_Start.x - width );
m_RealBoundaryBox.m_Pos.x = MIN( m_RealBoundaryBox.m_Pos.x, EdgeMod->m_End.x - width );
m_RealBoundaryBox.m_Pos.y = MIN( m_RealBoundaryBox.m_Pos.y, EdgeMod->m_Start.y - width );
m_RealBoundaryBox.m_Pos.y = MIN( m_RealBoundaryBox.m_Pos.y, EdgeMod->m_End.y - width );
xmax = MAX( xmax, EdgeMod->m_Start.x + width );
xmax = MAX( xmax, EdgeMod->m_End.x + width );
ymax = MAX( ymax, EdgeMod->m_Start.y + width );
ymax = MAX( ymax, EdgeMod->m_End.y + width );
break;
}
}
/* Pads: Recherche des coord min et max et mise a jour du cadre */
for( Pad = m_Pads; Pad != NULL; Pad = (D_PAD*) Pad->Pnext )
{
rayon = Pad->m_Rayon;
cx = Pad->m_Pos.x; cy = Pad->m_Pos.y;
2007-08-23 04:28:46 +00:00
m_RealBoundaryBox.m_Pos.x = MIN( m_RealBoundaryBox.m_Pos.x, cx - rayon );
m_RealBoundaryBox.m_Pos.y = MIN( m_RealBoundaryBox.m_Pos.y, cy - rayon );
xmax = MAX( xmax, cx + rayon );
ymax = MAX( ymax, cy + rayon );
}
m_RealBoundaryBox.SetWidth( xmax - m_RealBoundaryBox.m_Pos.x );
m_RealBoundaryBox.SetHeight( ymax - m_RealBoundaryBox.m_Pos.y );
m_Surface = ABS( (float) m_RealBoundaryBox.GetWidth() * m_RealBoundaryBox.GetHeight() );
}
/*******************************************************/
2007-08-30 22:20:52 +00:00
void MODULE::Display_Infos( WinEDA_DrawFrame* frame )
/*******************************************************/
{
int nbpad;
char bufcar[512], Line[512];
int pos;
bool flag = FALSE;
wxString msg;
frame->MsgPanel->EraseMsgBox(); /* Effacement de la zone message */
if( frame->m_Ident != PCB_FRAME )
flag = TRUE;
pos = 1;
Affiche_1_Parametre( frame, pos, m_Reference->m_Text, m_Value->m_Text, DARKCYAN );
/* Affiche signature temporelle ou date de modif (en edition de modules) */
pos += 14;
if( flag ) // Affichage date de modification (utile en Module Editor)
{
strcpy( Line, ctime( &m_LastEdit_Time ) );
strtok( Line, " \n\r" );
strcpy( bufcar, strtok( NULL, " \n\r" ) ); strcat( bufcar, " " );
strcat( bufcar, strtok( NULL, " \n\r" ) ); strcat( bufcar, ", " );
strtok( NULL, " \n\r" );
strcat( bufcar, strtok( NULL, " \n\r" ) );
msg = CONV_FROM_UTF8( bufcar );
Affiche_1_Parametre( frame, pos, _( "Last Change" ), msg, BROWN );
pos += 4;
}
else
{
msg.Printf( wxT( "%8.8lX" ), m_TimeStamp );
Affiche_1_Parametre( frame, pos, _( "TimeStamp" ), msg, BROWN );
}
pos += 6;
Affiche_1_Parametre( frame, pos, _( "Layer" ), ReturnPcbLayerName( m_Layer ), RED );
pos += 6;
EDA_BaseStruct* PtStruct = m_Pads;
nbpad = 0;
while( PtStruct )
{
nbpad++; PtStruct = PtStruct->Pnext;
}
msg.Printf( wxT( "%d" ), nbpad );
Affiche_1_Parametre( frame, pos, _( "Pads" ), msg, BLUE );
pos += 4;
msg = wxT( ".." );
2007-09-09 02:27:56 +00:00
if( IsLocked() )
msg[0] = 'L';
if( m_ModuleStatus & MODULE_is_PLACED )
msg[1] = 'P';
Affiche_1_Parametre( frame, pos, _( "Stat" ), msg, MAGENTA );
pos += 4;
msg.Printf( wxT( "%.1f" ), (float) m_Orient / 10 );
Affiche_1_Parametre( frame, pos, _( "Orient" ), msg, BROWN );
pos += 5;
Affiche_1_Parametre( frame, pos, _( "Module" ), m_LibRef, BLUE );
pos += 9;
Affiche_1_Parametre( frame, pos, _( "3D-Shape" ),
m_3D_Drawings->m_Shape3DName, RED );
pos += 14;
wxString doc = _( "Doc: " ) + m_Doc;
wxString keyword = _( "KeyW: " ) + m_KeyWord;
Affiche_1_Parametre( frame, pos, doc, keyword, BLACK );
}
2007-08-08 03:50:44 +00:00
/**
* Function HitTest
* tests if the given wxPoint is within the bounds of this object.
* @param refPos A wxPoint to test
* @return bool - true if a hit, else false
*/
bool MODULE::HitTest( const wxPoint& refPos )
{
/* Calcul des coord souris dans le repere module */
int spot_cX = refPos.x - m_Pos.x;
int spot_cY = refPos.y - m_Pos.y;
RotatePoint( &spot_cX, &spot_cY, -m_Orient );
/* la souris est-elle dans ce rectangle : */
if( m_BoundaryBox.Inside( spot_cX, spot_cY ) )
return true;
2007-09-09 02:27:56 +00:00
/* no
2007-09-09 02:27:56 +00:00
// The GENERAL_COLLECTOR needs these two tests in order to find a MODULE
// when the user clicks on its text. Keep these 2, needed in OnRightClick().
if( m_Reference->HitTest( refPos ) )
return true;
if( m_Value->HitTest( refPos ) )
return true;
*/
2007-08-08 03:50:44 +00:00
return false;
}
2008-01-06 12:43:57 +00:00
/**
* Function HitTest (overlayed)
* tests if the given EDA_Rect intersect the bounds of this object.
* @param refArea : the given EDA_Rect
* @return bool - true if a hit, else false
*/
bool MODULE::HitTest( EDA_Rect& refArea )
{
bool is_out_of_box = false;
SetRectangleExinscrit();
if( m_RealBoundaryBox.m_Pos.x < refArea.GetX() )
is_out_of_box = true;
if( m_RealBoundaryBox.m_Pos.y < refArea.GetY() )
is_out_of_box = true;
if( m_RealBoundaryBox.GetRight() > refArea.GetRight() )
is_out_of_box = true;
if( m_RealBoundaryBox.GetBottom() > refArea.GetBottom() )
is_out_of_box = true;
return is_out_of_box ? false : true;
}
// see class_module.h
SEARCH_RESULT MODULE::Visit( INSPECTOR* inspector, const void* testData,
const KICAD_T scanTypes[] )
{
KICAD_T stype;
SEARCH_RESULT result = SEARCH_CONTINUE;
const KICAD_T* p = scanTypes;
bool done = false;
2007-08-30 22:20:52 +00:00
#if 0 && defined(DEBUG)
std::cout << GetClass().mb_str() << ' ';
#endif
while( !done )
{
stype = *p;
switch( stype )
{
case TYPEMODULE:
result = inspector->Inspect( this, testData ); // inspect me
++p;
break;
case TYPEPAD:
result = IterateForward( m_Pads, inspector, testData, p );
++p;
break;
case TYPETEXTEMODULE:
result = inspector->Inspect( m_Reference, testData );
if( result == SEARCH_QUIT )
break;
result = inspector->Inspect( m_Value, testData );
if( result == SEARCH_QUIT )
break;
// m_Drawings can hold TYPETEXTMODULE also, so fall thru
case TYPEEDGEMODULE:
result = IterateForward( m_Drawings, inspector, testData, p );
// skip over any types handled in the above call.
for(;;)
{
switch( stype = *++p )
{
case TYPETEXTEMODULE:
case TYPEEDGEMODULE:
continue;
default: ;
}
break;
}
break;
default:
done = true;
break;
}
if( result == SEARCH_QUIT )
break;
}
return result;
}
2007-08-08 03:50:44 +00:00
#if defined(DEBUG)
/**
* Function Show
* is used to output the object tree, currently for debugging only.
* @param nestLevel An aid to prettier tree indenting, and is the level
* of nesting of this object within the overall tree.
* @param os The ostream& to output to.
*/
void MODULE::Show( int nestLevel, std::ostream& os )
{
// for now, make it look like XML, expand on this later.
NestedSpace( nestLevel, os ) << '<' << GetClass().Lower().mb_str() <<
2007-08-08 03:50:44 +00:00
" ref=\"" << m_Reference->m_Text.mb_str() << '"' <<
" value=\"" << m_Value->m_Text.mb_str() << '"' <<
2007-09-09 02:27:56 +00:00
" layer=\"" << ReturnPcbLayerName(m_Layer,true).mb_str() << '"' <<
">\n";
2007-08-30 22:20:52 +00:00
2007-08-08 03:50:44 +00:00
NestedSpace( nestLevel+1, os ) <<
"<boundingBox" << m_BoundaryBox.m_Pos << m_BoundaryBox.m_Size << "/>\n";
2007-08-08 03:50:44 +00:00
NestedSpace( nestLevel+1, os ) << "<orientation tenths=\"" << m_Orient << "\"/>\n";
EDA_BaseStruct* p;
2007-08-09 01:41:30 +00:00
NestedSpace( nestLevel+1, os ) << "<mpads>\n";
p = m_Pads;
for( ; p; p = p->Pnext )
2007-08-08 03:50:44 +00:00
p->Show( nestLevel+2, os );
2007-08-09 01:41:30 +00:00
NestedSpace( nestLevel+1, os ) << "</mpads>\n";
2007-08-09 01:41:30 +00:00
NestedSpace( nestLevel+1, os ) << "<mdrawings>\n";
p = m_Drawings;
for( ; p; p = p->Pnext )
2007-08-08 03:50:44 +00:00
p->Show( nestLevel+2, os );
2007-08-09 01:41:30 +00:00
NestedSpace( nestLevel+1, os ) << "</mdrawings>\n";
p = m_Son;
for( ; p; p = p->Pnext )
{
p->Show( nestLevel+1, os );
}
NestedSpace( nestLevel, os ) << "</" << GetClass().Lower().mb_str() << ">\n";
}
#endif