kicad/pcbnew/hotkeys_board_editor.cpp

686 lines
19 KiB
C++
Raw Normal View History

/***************/
/* hotkeys_board_editor.cpp */
/***************/
#include "fctsys.h"
#include "common.h"
#include "pcbnew.h"
#include "wxPcbStruct.h"
#include "pcbnew_id.h"
#include "class_drawpanel.h"
#include "confirm.h"
#include "class_board_design_settings.h"
#include "hotkeys.h"
#include "protos.h"
/* How to add a new hotkey:
* see hotkeys.cpp
*/
/**
* Function OnHotKey.
* ** Commands are case insensitive **
* Some commands are relatives to the item under the mouse cursor
* @param aDC = current device context
* @param aHotkeyCode = hotkey code (ascii or wxWidget code for special keys)
* @param aPosition The current cursor position in logical (drawing) units.
* @param aItem = NULL or pointer on a EDA_ITEM under the mouse cursor
*/
void PCB_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotkeyCode, const wxPoint& aPosition,
EDA_ITEM* aItem )
{
if( aHotkeyCode == 0 )
return;
wxPoint pos;
bool itemCurrentlyEdited = (GetCurItem() && GetCurItem()->m_Flags);
MODULE* module = NULL;
int evt_type = 0; //Used to post a wxCommandEvent on demand
PCB_SCREEN* screen = GetScreen();
/* Convert lower to upper case
* (the usual toupper function has problem with non ascii codes like function keys
*/
if( (aHotkeyCode >= 'a') && (aHotkeyCode <= 'z') )
aHotkeyCode += 'A' - 'a';
Ki_HotkeyInfo* HK_Descr = GetDescriptorFromHotkey( aHotkeyCode, common_Hotkey_List );
if( HK_Descr == NULL )
HK_Descr = GetDescriptorFromHotkey( aHotkeyCode, board_edit_Hotkey_List );
if( HK_Descr == NULL )
return;
// Create a wxCommandEvent that will be posted in some hot keys functions
wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
cmd.SetEventObject( this );
int ll;
switch( HK_Descr->m_Idcommand )
{
default:
case HK_NOT_FOUND:
return;
break;
case HK_SWITCH_LAYER_TO_PREVIOUS:
ll = getActiveLayer();
if( (ll <= LAYER_N_BACK) || (ll > LAYER_N_FRONT) )
break;
if( GetBoard()->GetCopperLayerCount() < 2 ) // Single layer
ll = LAYER_N_BACK;
else if( ll == LAYER_N_FRONT )
ll = MAX( LAYER_N_BACK,
GetBoard()->GetCopperLayerCount() - 2 );
else
ll--;
SwitchLayer( aDC, ll );
break;
case HK_SWITCH_LAYER_TO_NEXT:
ll = getActiveLayer();
if( (ll < LAYER_N_BACK) || (ll >= LAYER_N_FRONT) )
break;
if( GetBoard()->GetCopperLayerCount() < 2 ) // Single layer
ll = LAYER_N_BACK;
else if( ll >= GetBoard()->GetCopperLayerCount() - 2 )
ll = LAYER_N_FRONT;
else
ll++;
SwitchLayer( aDC, ll );
break;
case HK_SWITCH_LAYER_TO_COMPONENT:
SwitchLayer( aDC, LAYER_N_FRONT );
break;
case HK_SWITCH_LAYER_TO_COPPER:
SwitchLayer( aDC, LAYER_N_BACK );
break;
case HK_SWITCH_LAYER_TO_INNER1:
SwitchLayer( aDC, LAYER_N_2 );
break;
case HK_SWITCH_LAYER_TO_INNER2:
SwitchLayer( aDC, LAYER_N_3 );
break;
case HK_SWITCH_LAYER_TO_INNER3:
SwitchLayer( aDC, LAYER_N_4 );
break;
case HK_SWITCH_LAYER_TO_INNER4:
SwitchLayer( aDC, LAYER_N_5 );
break;
case HK_SWITCH_LAYER_TO_INNER5:
SwitchLayer( aDC, LAYER_N_6 );
break;
case HK_SWITCH_LAYER_TO_INNER6:
SwitchLayer( aDC, LAYER_N_7 );
break;
case HK_HELP: // Display Current hotkey list
DisplayHotkeyList( this, g_Board_Editor_Hokeys_Descr );
break;
case HK_ZOOM_IN:
evt_type = ID_POPUP_ZOOM_IN;
break;
case HK_ZOOM_OUT:
evt_type = ID_POPUP_ZOOM_OUT;
break;
case HK_ZOOM_REDRAW:
evt_type = ID_ZOOM_REDRAW;
break;
case HK_ZOOM_AUTO:
evt_type = ID_ZOOM_PAGE;
break;
case HK_ZOOM_CENTER:
evt_type = ID_POPUP_ZOOM_CENTER;
break;
case HK_ADD_MODULE:
evt_type = ID_PCB_MODULE_BUTT;
break;
case HK_UNDO:
case HK_REDO:
if( !itemCurrentlyEdited )
{
wxCommandEvent event( wxEVT_COMMAND_TOOL_CLICKED, HK_Descr->m_IdMenuEvent );
wxPostEvent( this, event );
}
break;
case HK_RESET_LOCAL_COORD: /*Reset the relative coord */
GetScreen()->m_O_Curseur = GetScreen()->GetCrossHairPosition();
break;
case HK_SWITCH_UNITS:
g_UserUnit = (g_UserUnit == INCHES) ? MILLIMETRES : INCHES;
break;
case HK_SWITCH_TRACK_DISPLAY_MODE:
DisplayOpt.DisplayPcbTrackFill ^= 1;
DisplayOpt.DisplayPcbTrackFill &= 1;
m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill;
DrawPanel->Refresh();
break;
case HK_DELETE:
OnHotkeyDeleteItem( aDC );
break;
case HK_BACK_SPACE:
if( /*m_ID_current_state == ID_TRACK_BUTT &&*/ (getActiveLayer() <= LAYER_N_FRONT) )
{
if( !itemCurrentlyEdited )
{
// no track is currently being edited - select a segment and remove it.
// @todo: possibly? pass the HK command code to PcbGeneralLocateAndDisplay()
// so it can restrict its search to specific item types.
BOARD_ITEM * item = PcbGeneralLocateAndDisplay();
// don't let backspace delete modules!!
if( item && item->IsTrack() )
{
Delete_Segment( aDC, (TRACK*) item );
SetCurItem( NULL );
}
OnModify();
}
else if( GetCurItem()->IsTrack() )
{
// then an element is being edited - remove the last segment.
// simple lines for debugger:
TRACK* track = (TRACK*) GetCurItem();
track = Delete_Segment( aDC, track );
SetCurItem( track );
OnModify();
}
}
break;
case HK_END_TRACK:
if( itemCurrentlyEdited && GetCurItem()->IsTrack() && GetCurItem()->IsNew() )
{
// A new track is in progress: call to End_Route()
DrawPanel->MoveCursorToCrossHair();
End_Route( (TRACK*) GetCurItem(), aDC );
}
break;
case HK_GET_AND_MOVE_FOOTPRINT:
if( !itemCurrentlyEdited )
evt_type = ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST;
break;
case HK_FIND_ITEM:
if( !itemCurrentlyEdited )
evt_type = ID_FIND_ITEMS;
break;
case HK_LOAD_BOARD:
if( !itemCurrentlyEdited )
evt_type = ID_LOAD_FILE ;
break;
case HK_SAVE_BOARD:
if( !itemCurrentlyEdited )
evt_type = ID_SAVE_BOARD;
break;
case HK_ADD_MICROVIA: // Place a micro via if a track is in progress
if( GetToolId() != ID_TRACK_BUTT )
return;
if( !itemCurrentlyEdited ) // no track in progress: nothing to do
break;
if( GetCurItem()->Type() != TYPE_TRACK ) // Should not occur
return;
if( !GetCurItem()->IsNew() )
return;
// place micro via and switch layer
if( IsMicroViaAcceptable() )
evt_type = ID_POPUP_PCB_PLACE_MICROVIA;
break;
case HK_ADD_VIA: // Switch to alternate layer and Place a via if a track is in progress
if( !itemCurrentlyEdited ) // no track in progress: switch layer only
{
Other_Layer_Route( NULL, aDC );
break;
}
if( GetToolId() != ID_TRACK_BUTT )
return;
if( GetCurItem()->Type() != TYPE_TRACK )
return;
if( !GetCurItem()->IsNew() )
return;
evt_type = ID_POPUP_PCB_PLACE_VIA;
break;
case HK_SWITCH_TRACK_POSTURE:
/* change the position of initial segment when creating new tracks
* switch from _/ to -\ .
*/
evt_type = ID_POPUP_PCB_SWITCH_TRACK_POSTURE ;
break;
case HK_ADD_NEW_TRACK: // Start new track
if( getActiveLayer() > LAYER_N_FRONT )
break;
if( GetToolId() != ID_TRACK_BUTT && !itemCurrentlyEdited )
{
cmd.SetId( ID_TRACK_BUTT );
GetEventHandler()->ProcessEvent( cmd );
}
if( GetToolId() != ID_TRACK_BUTT )
break;
if( !itemCurrentlyEdited ) // no track in progress:
{
TRACK* track = Begin_Route( NULL, aDC );
SetCurItem( track );
if( track )
DrawPanel->m_AutoPAN_Request = true;
}
else if( GetCurItem()->IsNew() )
{
TRACK* track = Begin_Route( (TRACK*) GetCurItem(), aDC );
// SetCurItem() must not write to the msg panel
// because a track info is displayed while moving the mouse cursor
if( track ) // A new segment was created
SetCurItem( track, false );
DrawPanel->m_AutoPAN_Request = true;
}
break;
case HK_EDIT_ITEM: // Edit board item
OnHotkeyEditItem( HK_EDIT_ITEM );
break;
// Footprint edition:
case HK_LOCK_UNLOCK_FOOTPRINT: // toggle module "MODULE_is_LOCKED" status:
// get any module, locked or not locked and toggle its locked status
if( !itemCurrentlyEdited )
{
pos = screen->RefPos( true );
module = Locate_Prefered_Module( GetBoard(), pos, screen->m_Active_Layer, true );
}
else if( GetCurItem()->Type() == TYPE_MODULE )
{
module = (MODULE*) GetCurItem();
}
if( module )
{
SetCurItem( module );
module->SetLocked( !module->IsLocked() );
module->DisplayInfo( this );
}
break;
case HK_DRAG_ITEM: // Start drag module or track segment
OnHotkeyMoveItem( HK_DRAG_ITEM );
break;
case HK_MOVE_ITEM: // Start move item
OnHotkeyMoveItem( HK_MOVE_ITEM );
break;
case HK_ROTATE_ITEM: // Rotation
OnHotkeyRotateItem( HK_ROTATE_ITEM );
break;
case HK_FLIP_FOOTPRINT: // move to other side
OnHotkeyRotateItem( HK_FLIP_FOOTPRINT );
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
wxPostEvent( this, evt );
}
}
/**
* Function OnHotkeyDeleteItem
* Delete the item found under the mouse cursor
* Depending on the current active tool::
* Tool track
* if a track is in progress: Delete the last segment
* else delete the entire track
* Tool module (footprint):
* Delete the module.
* @param aDC = current device context
* @return true if an item was deleted
*/
bool PCB_EDIT_FRAME::OnHotkeyDeleteItem( wxDC* aDC )
{
BOARD_ITEM* item = GetCurItem();
bool ItemFree = (item == NULL) || (item->m_Flags == 0);
switch( GetToolId() )
{
case ID_TRACK_BUTT:
if( getActiveLayer() > LAYER_N_FRONT )
return false;
if( ItemFree )
{
item = PcbGeneralLocateAndDisplay();
if( item && !item->IsTrack( ) )
return false;
Delete_Track( aDC, (TRACK*) item );
}
else if( item->IsTrack( ) )
{
// simple lines for debugger:
TRACK* track = (TRACK*) item;
track = Delete_Segment( aDC, track );
SetCurItem( track );
OnModify();
return true;
}
break;
case ID_PCB_MODULE_BUTT:
if( ItemFree )
{
wxPoint pos = GetScreen()->RefPos( false );
MODULE* module = Locate_Prefered_Module( GetBoard(), pos, ALL_LAYERS, false );
if( module == NULL )
return false;
if( !IsOK( this, _( "Delete module?" ) ) )
return false;
RemoveStruct( module, aDC );
}
else
return false;
break;
default:
if( ItemFree )
{
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
if( (item->Type() == TYPE_MODULE) && !IsOK( this, _( "Delete module?" ) ) )
return false;
RemoveStruct( item, aDC );
}
else
return false;
}
OnModify();
SetCurItem( NULL );
return true;
}
bool PCB_EDIT_FRAME::OnHotkeyEditItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->m_Flags;
if( itemCurrentlyEdited )
return false;
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
int evt_type = 0; //Used to post a wxCommandEvent on demand
switch( item->Type() )
{
case TYPE_TRACK:
case TYPE_VIA:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_TRACKSEG;
break;
case TYPE_TEXTE:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_TEXTEPCB;
break;
case TYPE_MODULE:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_MODULE;
break;
case TYPE_PAD:
// Post a EDIT_MODULE event here to prevent pads
// from being edited by hotkeys.
// Process_Special_Functions takes care of finding
// the parent.
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_MODULE;
break;
case TYPE_MIRE:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_MIRE;
break;
case TYPE_DIMENSION:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_DIMENSION;
break;
case TYPE_TEXTE_MODULE:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_TEXTMODULE;
break;
case TYPE_DRAWSEGMENT:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_DRAWING;
break;
case TYPE_ZONE_CONTAINER:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_ZONE_PARAMS;
break;
default:
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
wxPostEvent( this, evt );
return true;
}
return false;
}
/**
* Function OnHotkeyMoveItem
* Move or drag the item (footprint, track, text .. ) found under the mouse cursor
* An item can be moved (or dragged) only if there is no item currently edited
* Only a footprint, a pad or a track can be dragged
* @param aIdCommand = the hotkey command id
* @return true if an item was moved
*/
bool PCB_EDIT_FRAME::OnHotkeyMoveItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->m_Flags;
if( itemCurrentlyEdited )
return false;
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
int evt_type = 0; //Used to post a wxCommandEvent on demand
switch( item->Type() )
{
case TYPE_TRACK:
case TYPE_VIA:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TRACK_NODE;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_TRACK_SEGMENT;
break;
case TYPE_MODULE:
{
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_MODULE_REQUEST;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_MODULE_REQUEST;
}
break;
case TYPE_PAD:
// Post MODULE_REQUEST events here to prevent pads
// from being moved or dragged by hotkeys.
// Process_Special_Functions takes care of finding
// the parent.
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_MODULE_REQUEST;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_MODULE_REQUEST;
break;
case TYPE_TEXTE:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST;
break;
case TYPE_MIRE:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_MIRE_REQUEST;
break;
case TYPE_ZONE_CONTAINER:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_ZONE_OUTLINES;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT;
break;
case TYPE_TEXTE_MODULE:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST;
break;
case TYPE_DRAWSEGMENT:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_DRAWING_REQUEST;
break;
default:
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
wxPostEvent( this, evt );
return true;
}
return false;
}
/**
* Function OnHotkeyRotateItem
* Rotate the item (text or footprint) found under the mouse cursor
* Note:
* this command can be used with an item currently in edit
* Only some items can be rotated (footprints and texts)
* @param aIdCommand = the hotkey command id
* @return true if an item was moved
*/
bool PCB_EDIT_FRAME::OnHotkeyRotateItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->m_Flags;
int evt_type = 0; // Used to post a wxCommandEvent on demand
if( !itemCurrentlyEdited )
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
switch( item->Type() )
{
case TYPE_MODULE:
{
if( aIdCommand == HK_ROTATE_ITEM ) // Rotation
evt_type = ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE;
if( aIdCommand == HK_FLIP_FOOTPRINT ) // move to other side
evt_type = ID_POPUP_PCB_CHANGE_SIDE_MODULE;
}
break;
case TYPE_TEXTE:
if( aIdCommand == HK_ROTATE_ITEM ) // Rotation
evt_type = ID_POPUP_PCB_ROTATE_TEXTEPCB;
break;
case TYPE_TEXTE_MODULE:
if( aIdCommand == HK_ROTATE_ITEM ) // Rotation
evt_type = ID_POPUP_PCB_ROTATE_TEXTMODULE;
break;
default:
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
wxPostEvent( this, evt );
return true;
}
return false;
}