kicad/libs.linux

#
# Configuration for kicad build & install
#

# You must comment or uncomment this line to disable/enable python support
#KICAD_PYTHON = 1

# Locations for install targets. All can be overriden on the make command.
# Normally you'd only expect to override the PREFIX if you want to install to
# a non standard install dir (or a temp location for packaging).
# For packaging you can override and install anywhere, but to run from a
# non-standard location edit common/gestfich.ccp so it knows where to
# load help/data/etc. files from.
# Current supported PREFIXes are /usr and /usr/local (standard install for distributions)
# and /usr/local/kicad is used when STD_INSTALL = 0 or STD_INSTALL = 2
# all kicad files will be in /usr/local/kicad
# STD_INSTALL = 2 is used only to make static link (only useful when kicad run on an other 
# linux distribution than the distributions used to compil kicad.

STD_INSTALL = 1

#*******************************************
#*******************************************

ifndef KICAD_PYTHON
ifeq ($(STD_INSTALL), 2)
KICAD_STATIC_LINK = 1
endif
endif

ifndef KICAD_STATIC_LINK
KICAD_STATIC_LINK = 0
endif

ifeq ($(STD_INSTALL), 1)
PREFIX = /usr
KICAD_BIN = $(PREFIX)/bin
KICAD_PLUGINS = $(PREFIX)/lib/kicad/plugins
KICAD_DOCS=$(PREFIX)/share/doc/kicad
KICAD_DATA=$(PREFIX)/share/kicad
KICAD_MODULES=$(KICAD_DATA)/modules
KICAD_LIBRARY=$(KICAD_DATA)/library
KICAD_INTERNAT=$(KICAD_DATA)/internat
KICAD_TEMPLATE=$(KICAD_DATA)/template

else
# when STD_INSTALL = 0 or STD_INSTALL = 2
# STD_INSTALL = 2 is used by myself (JP Charras) to build a statically linked distribution intalled in /usr/local (with STD_INSTALL = 0)
PREFIX = /usr/local/kicad
KICAD_BIN = $(PREFIX)/linux
KICAD_PLUGINS = $(KICAD_BIN)/plugins
KICAD_DOCS=$(PREFIX)/help
KICAD_DATA=$(PREFIX)
KICAD_MODULES=$(KICAD_DATA)/modules
KICAD_LIBRARY=$(KICAD_DATA)/library
KICAD_INTERNAT=$(KICAD_DATA)/internat
KICAD_TEMPLATE=$(KICAD_DATA)/template
endif

# http://www.gnu.org/software/autoconf/manual/make/Catalogue-of-Rules.html#Catalogue-of-Rules
CXX = g++


SRCSUFF = .cpp
OBJSUFF = .o
FINAL = 1


# turn on/OFF debugging for all executables, only tested without KICAD_PYTHON
DEBUG = 0


# common CPPFLAGS to all components, further CPPFLAGS customization in 
# directory specific makefile.gtk files.
ifeq ($(DEBUG), 1)
WXXFLAGS := $(shell wx-config --debug --cxxflags) 
CPPFLAGS = -Wall -g3 -ggdb3 ${WXXFLAGS} -fno-strict-aliasing -DDEBUG
LDFLAGS = -g3 -ggdb3 #-v
else
WXXFLAGS := $(shell wx-config --cxxflags) 
CPPFLAGS = -Wall -O2 ${WXXFLAGS} -fno-strict-aliasing
LDFLAGS = -s #-v
endif


# a command line define which affects pcbnew only, causing it to match current layer 
ifdef USE_MATCH_LAYER
CPPFLAGS += -DUSE_MATCH_LAYER
endif



ifeq ($(KICAD_STATIC_LINK), 1)
LD  = gcc
else
LD  = g++
endif

ifdef KICAD_PYTHON
PYTHON_VERSION=2.5
PYLIBS= -L/usr/lib
PYLIBS+= -L /usr/include/python
PYLIBS+= -lpython$(PYTHON_VERSION)
PYLIBS+= -lboost_python-mt
EXTRACPPFLAGS+=-I /usr/include/python$(PYTHON_VERSION) -DKICAD_PYTHON -fno-strict-aliasing
endif

# path and version definition for wxWidgets and mesa libs
MESALIBSPATH = /usr/local/lib
WXPATH = `wx-config --prefix`/lib
PREFIX_WX_LIBS = lib`wx-config --basename`
SUFFIX_WX_LIBSTD = `wx-config --utility=`
SUFFIX_WX_LIBGL = _gl-$(LIBVERSION).a

# Use static link for libstdc++.a (sometimes also libsupc++.a)
# locate libstdc++.a and copy it in kicad_dev/syslibs
ifeq ($(KICAD_STATIC_LINK), 1)
#define path for a copy of libstdc++.a or/and libsupc++.a:
LIBSTDC = ../syslibs/libstdc++.a
else
# Or Use static link for libsupc++ or libstdc++ (more easy!!)
LIBSTDC = #-lstdc++ is implied when using g++ to link
endif


LIBVERSION=`wx-config --release`
LIBREGEX=$(WXPATH)/libwxregexu-$(LIBVERSION).a

# use link static for wxWidgets
ifeq ($(KICAD_STATIC_LINK), 1)
LIBS3D = $(WXPATH)/$(PREFIX_WX_LIBS)$(SUFFIX_WX_LIBGL)\
	 $(MESALIBSPATH)/libGL.a $(MESALIBSPATH)/libGLU.a

AUXLIB = -lXxf86vm
#AUXLIB = /usr/X11R6/lib/libXinerama.a

WXSYSLIB= $(WXPATH)/$(PREFIX_WX_LIBS)-$(LIBVERSION).a \
	$(WXPATH)/libwxpng-$(LIBVERSION).a\
	$(WXPATH)/libwxjpeg-$(LIBVERSION).a\
	$(WXPATH)/libwxzlib-$(LIBVERSION).a\
	$(LIBREGEX)\
         $(AUXLIB)\
		-lgtk-x11-2.0 -lgdk-x11-2.0 \
        -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lgthread-2.0\
        -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl\
        -lglib-2.0 -lpangoft2-1.0 -lSM\
        -L/usr/lib $(PYLIBS)


WXSYSLIB_WITH_GL= $(WXSYSLIB) $(LIBS3D)

else

ifeq ($(DEBUG), 1)
# debug wxWidgets
WXSYSLIB= `wx-config --debug --libs std`
WXSYSLIB_WITH_GL= `wx-config --debug --libs std,gl`
else
# or use "standard command" for wxWidgets
WXSYSLIB= `wx-config --libs std`
WXSYSLIB_WITH_GL= `wx-config --libs std,gl`
endif

endif


# attention <20> l'ordre des libairies
LIBS = -L/usr/local/lib -L/usr/X11R6/lib\
	$(EXTRALIBS) $(WXSYSLIB)\
	$(LIBSTDC) $(PYLIBS)

LIBS_WITH_GL = -L/usr/local/lib -L/usr/X11R6/lib\
	$(EXTRALIBS) $(WXSYSLIB_WITH_GL)\
	$(LIBSTDC) $(PYLIBS)