kicad/pcbnew/pcbplot.cpp

527 lines
16 KiB
C++
Raw Normal View History

2012-06-09 09:38:58 +00:00
/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 2017 Jean-Pierre Charras, jp.charras at wanadoo.fr
2012-06-09 09:38:58 +00:00
* Copyright (C) 2012 SoftPLC Corporation, Dick Hollenbeck <dick@softplc.com>
* Copyright (C) 1992-2017 KiCad Developers, see AUTHORS.txt for contributors.
2012-06-09 09:38:58 +00:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
/**
* @file pcbnew/pcbplot.cpp
*/
#include <fctsys.h>
#include <plot_common.h>
#include <confirm.h>
#include <wxPcbStruct.h>
#include <pcbplot.h>
#include <pcbstruct.h>
#include <base_units.h>
#include <reporter.h>
#include <class_board.h>
#include <pcbnew.h>
2012-08-29 16:59:50 +00:00
#include <plotcontroller.h>
#include <pcb_plot_params.h>
2012-08-29 16:59:50 +00:00
#include <wx/ffile.h>
#include <dialog_plot.h>
#include <macros.h>
#include <build_version.h>
2007-05-06 16:03:28 +00:00
const wxString GetGerberProtelExtension( LAYER_NUM aLayer )
2012-08-29 16:59:50 +00:00
{
if( IsCopperLayer( aLayer ) )
2012-08-29 16:59:50 +00:00
{
if( aLayer == F_Cu )
return wxT( "gtl" );
else if( aLayer == B_Cu )
return wxT( "gbl" );
else
{
return wxString::Format( wxT( "g%d" ), aLayer+1 );
}
}
else
{
switch( aLayer )
{
case B_Adhes: return wxT( "gba" );
case F_Adhes: return wxT( "gta" );
case B_Paste: return wxT( "gbp" );
case F_Paste: return wxT( "gtp" );
case B_SilkS: return wxT( "gbo" );
case F_SilkS: return wxT( "gto" );
case B_Mask: return wxT( "gbs" );
case F_Mask: return wxT( "gts" );
case Edge_Cuts: return wxT( "gm1" );
case Dwgs_User:
case Cmts_User:
case Eco1_User:
case Eco2_User:
default: return wxT( "gbr" );
}
2012-08-29 16:59:50 +00:00
}
}
2012-08-29 16:59:50 +00:00
const wxString GetGerberFileFunctionAttribute( const BOARD *aBoard, LAYER_NUM aLayer )
{
wxString attrib;
switch( aLayer )
{
2014-06-30 06:44:46 +00:00
case F_Adhes:
attrib = "Glue,Top";
break;
2014-06-30 06:44:46 +00:00
case B_Adhes:
attrib = "Glue,Bot";
break;
2014-06-30 06:44:46 +00:00
case F_SilkS:
attrib = "Legend,Top";
break;
2014-06-30 06:44:46 +00:00
case B_SilkS:
attrib = "Legend,Bot";
break;
2014-06-30 06:44:46 +00:00
case F_Mask:
attrib = "Soldermask,Top";
break;
2014-06-30 06:44:46 +00:00
case B_Mask:
attrib = "Soldermask,Bot";
break;
2014-06-30 06:44:46 +00:00
case F_Paste:
attrib = "Paste,Top";
break;
2014-06-30 06:44:46 +00:00
case B_Paste:
attrib = "Paste,Bot";
break;
2014-06-30 06:44:46 +00:00
case Edge_Cuts:
// Board outline.
// Can be "Profile,NP" (Not Plated: usual) or "Profile,P"
// This last is the exception (Plated)
attrib = "Profile,NP";
break;
2014-06-30 06:44:46 +00:00
case Dwgs_User:
attrib = "Drawing";
break;
2014-06-30 06:44:46 +00:00
case Cmts_User:
attrib = "Other,Comment";
break;
2014-06-30 06:44:46 +00:00
case Eco1_User:
attrib = "Other,ECO1";
2014-06-30 06:44:46 +00:00
break;
case Eco2_User:
attrib = "Other,ECO2";
2014-06-30 06:44:46 +00:00
break;
case B_Fab:
attrib = "Other,Fab,Bot";
break;
case F_Fab:
attrib = "Other,Fab,Top";
break;
2014-06-30 06:44:46 +00:00
case B_Cu:
attrib.Printf( wxT( "Copper,L%d,Bot" ), aBoard->GetCopperLayerCount() );
2014-06-30 06:44:46 +00:00
break;
case F_Cu:
attrib = "Copper,L1,Top";
break;
2014-06-30 06:44:46 +00:00
default:
if( IsCopperLayer( aLayer ) )
attrib.Printf( wxT( "Copper,L%d,Inr" ), aLayer+1 );
else
attrib.Printf( wxT( "Other,User" ), aLayer+1 );
break;
}
// Add the signal type of the layer, if relevant
2014-06-30 06:44:46 +00:00
if( IsCopperLayer( aLayer ) )
{
LAYER_T type = aBoard->GetLayerType( ToLAYER_ID( aLayer ) );
switch( type )
{
case LT_SIGNAL:
attrib += ",Signal";
break;
case LT_POWER:
attrib += ",Plane";
break;
case LT_MIXED:
attrib += ",Mixed";
break;
default:
break; // do nothing (but avoid a warning for unhandled LAYER_T values from GCC)
}
}
wxString fileFct;
fileFct.Printf( "%%TF.FileFunction,%s*%%", GetChars( attrib ) );
return fileFct;
}
static const wxString GetGerberFilePolarityAttribute( LAYER_NUM aLayer )
{
/* build the string %TF.FilePolarity,Positive*%
* or %TF.FilePolarity,Negative*%
* an emply string for layers which do not use a polarity
*
* The value of the .FilePolarity specifies whether the image represents the
* presence or absence of material.
* This attribute can only be used when the file represents a pattern in a material layer,
* e.g. copper, solder mask, legend.
* Together with.FileFunction it defines the role of that image in
* the layer structure of the PCB.
* Note that the .FilePolarity attribute does not change the image -
* no attribute does.
* It changes the interpretation of the image.
* For example, in a copper layer in positive polarity a round flash generates a copper pad.
* In a copper layer in negative polarity it generates a clearance.
* Solder mask images usually represent solder mask openings and are then negative.
* This may be counter-intuitive.
*/
int polarity = 0;
switch( aLayer )
{
case F_Adhes:
case B_Adhes:
case F_SilkS:
case B_SilkS:
case F_Paste:
case B_Paste:
polarity = 1;
break;
case F_Mask:
case B_Mask:
polarity = -1;
break;
default:
if( IsCopperLayer( aLayer ) )
polarity = 1;
break;
}
wxString filePolarity;
if( polarity == 1 )
filePolarity = "%TF.FilePolarity,Positive*%";
if( polarity == -1 )
filePolarity = "%TF.FilePolarity,Negative*%";
return filePolarity;
}
/* Add some X2 attributes to the file header, as defined in the
* Gerber file format specification J4 and "Revision 2015.06"
*/
// A helper function to convert a X2 attribute string to a X1 structured comment:
static wxString& makeStringCompatX1( wxString& aText, bool aUseX1CompatibilityMode )
{
if( aUseX1CompatibilityMode )
{
aText.Replace( "%", "" );
aText.Prepend( "G04 #@! " );
}
return aText;
}
void AddGerberX2Header( PLOTTER * aPlotter,
const BOARD *aBoard, bool aUseX1CompatibilityMode )
{
wxString text;
// Creates the TF,.GenerationSoftware. Format is:
// %TF,.GenerationSoftware,<vendor>,<application name>[,<application version>]*%
text.Printf( wxT( "%%TF.GenerationSoftware,KiCad,Pcbnew,%s*%%" ), GetBuildVersion() );
aPlotter->AddLineToHeader( makeStringCompatX1( text, aUseX1CompatibilityMode ) );
// creates the TF.CreationDate ext:
// The attribute value must conform to the full version of the ISO 8601
// date and time format, including time and time zone. Note that this is
// the date the Gerber file was effectively created,
// not the time the project of PCB was started
wxDateTime date( wxDateTime::GetTimeNow() );
// Date format: see http://www.cplusplus.com/reference/ctime/strftime
wxString msg = date.Format( wxT( "%z" ) ); // Extract the time zone offset
// The time zone offset format is + (or -) mm or hhmm (mm = number of minutes, hh = number of hours)
// we want +(or -) hh:mm
if( msg.Len() > 3 )
msg.insert( 3, ":", 1 ),
text.Printf( wxT( "%%TF.CreationDate,%s%s*%%" ), GetChars( date.FormatISOCombined() ), GetChars( msg ) );
aPlotter->AddLineToHeader( makeStringCompatX1( text, aUseX1CompatibilityMode ) );
// Creates the TF,.ProjectId. Format is (from Gerber file format doc):
// %TF.ProjectId,<project id>,<project GUID>,<revision id>*%
// <project id> is the name of the project, restricted to basic ASCII symbols only,
// and comma not accepted
// All illegal chars will be replaced by underscore
// <project GUID> is a 32 hexadecimal digits string which is an unique id of a project.
// This is a random 128-bit number expressed in 32 hexadecimal digits.
// See en.wikipedia.org/wiki/GUID for more information
// However Kicad does not handle such a project GUID, so it is built from the board name
// Rem: <project id> accepts only ASCII 7 code (only basic ASCII codes are allowed in gerber files).
wxFileName fn = aBoard->GetFileName();
msg = fn.GetFullName();
wxString guid;
// Build a 32 digits GUID from the board name:
for( unsigned ii = 0; ii < msg.Len(); ii++ )
{
int cc1 = int( msg[ii] ) & 0x0F;
int cc2 = ( int( msg[ii] ) >> 4) & 0x0F;
guid << wxString::Format( wxT( "%X%X" ), cc2, cc1 );
if( guid.Len() >= 32 )
break;
}
// guid has 32 digits, so add missing digits
int cnt = 32 - guid.Len();
if( cnt > 0 )
guid.Append( '0', cnt );
// build the <project id> string: this is the board short filename (without ext)
// and all non ASCII chars and comma are replaced by '_'
msg = fn.GetName();
msg.Replace( wxT( "," ), wxT( "_" ) );
// build the <rec> string. All non ASCII chars and comma are replaced by '_'
wxString rev = ((BOARD*)aBoard)->GetTitleBlock().GetRevision();
rev.Replace( wxT( "," ), wxT( "_" ) );
if( rev.IsEmpty() )
rev = wxT( "rev?" );
text.Printf( wxT( "%%TF.ProjectId,%s,%s,%s*%%" ), msg.ToAscii(), GetChars( guid ), rev.ToAscii() );
aPlotter->AddLineToHeader( makeStringCompatX1( text, aUseX1CompatibilityMode ) );
// Add the TF.SameCoordinates, that specify all gerber files uses the same
// origin and orientation, and the registration between files is OK.
// The parameter of TF.SameCoordinates is a string that is common
// to all files using the same registration and has no special meaning:
// this is just a key
// Because there is no mirroring/rotation in Kicad, only the plot offset origin
// can create incorrect registration.
// So we create a key from plot offset options.
// and therefore for a given board, all Gerber files having the same key have the same
// plot origin and use the same registration
//
// Currently the key is "Original" when using absolute Pcbnew coordinates,
// and te PY ans PY position od auxiliary axis, when using it.
// Please, if absolute Pcbnew coordinates, one day, are set by user, change the way
// the key is built to ensure file only using the *same* axis have the same key.
wxString registration_id = "Original";
wxPoint auxOrigin = aBoard->GetAuxOrigin();
if( aBoard->GetPlotOptions().GetUseAuxOrigin() && auxOrigin.x && auxOrigin.y )
registration_id.Printf( "PX%xPY%x", auxOrigin.x, auxOrigin.y );
text.Printf( "%%TF.SameCoordinates,%s*%%", registration_id.GetData() );
aPlotter->AddLineToHeader( makeStringCompatX1( text, aUseX1CompatibilityMode ) );
}
void AddGerberX2Attribute( PLOTTER * aPlotter,
const BOARD *aBoard, LAYER_NUM aLayer, bool aUseX1CompatibilityMode )
{
AddGerberX2Header( aPlotter, aBoard, aUseX1CompatibilityMode );
wxString text;
// Add the TF.FileFunction
text = GetGerberFileFunctionAttribute( aBoard, aLayer );
aPlotter->AddLineToHeader( makeStringCompatX1( text, aUseX1CompatibilityMode ) );
// Add the TF.FilePolarity (for layers which support that)
text = GetGerberFilePolarityAttribute( aLayer );
if( !text.IsEmpty() )
aPlotter->AddLineToHeader( makeStringCompatX1( text, aUseX1CompatibilityMode ) );
}
2014-06-30 06:44:46 +00:00
void BuildPlotFileName( wxFileName* aFilename, const wxString& aOutputDir,
const wxString& aSuffix, const wxString& aExtension )
2012-08-29 16:59:50 +00:00
{
// aFilename contains the base filename only (without path and extension)
// when calling this function.
// It is expected to be a valid filename (this is usually the board filename)
2012-08-29 16:59:50 +00:00
aFilename->SetPath( aOutputDir );
// Set the file extension
aFilename->SetExt( aExtension );
// remove leading and trailing spaces if any from the suffix, if
// something survives add it to the name;
// also the suffix can contain some not allowed chars in filename (/ \ . :),
// so change them to underscore
// Remember it can be called from a python script, so the illegal chars
// have to be filtered here.
wxString suffix = aSuffix;
suffix.Trim( true );
suffix.Trim( false );
wxString badchars = wxFileName::GetForbiddenChars(wxPATH_DOS);
badchars.Append( '%' );
for( unsigned ii = 0; ii < badchars.Len(); ii++ )
suffix.Replace( badchars[ii], wxT("_") );
if( !suffix.IsEmpty() )
aFilename->SetName( aFilename->GetName() + wxT( "-" ) + suffix );
}
2012-08-29 16:59:50 +00:00
2012-08-29 16:59:50 +00:00
PLOT_CONTROLLER::PLOT_CONTROLLER( BOARD *aBoard )
{
m_plotter = NULL;
m_board = aBoard;
m_plotLayer = UNDEFINED_LAYER;
2012-08-29 16:59:50 +00:00
}
2012-08-29 16:59:50 +00:00
PLOT_CONTROLLER::~PLOT_CONTROLLER()
{
ClosePlot();
}
2012-08-29 16:59:50 +00:00
/* IMPORTANT THING TO KNOW: the locale during plots *MUST* be kept as
* C/POSIX using a LOCALE_IO object on the stack. This even when
* opening/closing the plotfile, since some drivers do I/O even then */
void PLOT_CONTROLLER::ClosePlot()
{
LOCALE_IO toggle;
if( m_plotter )
{
m_plotter->EndPlot();
delete m_plotter;
m_plotter = NULL;
}
}
bool PLOT_CONTROLLER::OpenPlotfile( const wxString &aSuffix,
PlotFormat aFormat,
2012-08-29 16:59:50 +00:00
const wxString &aSheetDesc )
{
LOCALE_IO toggle;
/* Save the current format: sadly some plot routines depends on this
but the main reason is that the StartPlot method uses it to
dispatch the plotter creation */
GetPlotOptions().SetFormat( aFormat );
2012-08-29 16:59:50 +00:00
// Ensure that the previous plot is closed
ClosePlot();
// Now compute the full filename for the output and start the plot
// (after ensuring the output directory is OK)
wxString outputDirName = GetPlotOptions().GetOutputDirectory() ;
2012-08-29 16:59:50 +00:00
wxFileName outputDir = wxFileName::DirName( outputDirName );
wxString boardFilename = m_board->GetFileName();
if( EnsureFileDirectoryExists( &outputDir, boardFilename ) )
2012-08-29 16:59:50 +00:00
{
// outputDir contains now the full path of plot files
m_plotFile = boardFilename;
m_plotFile.SetPath( outputDir.GetPath() );
wxString fileExt = GetDefaultPlotExtension( aFormat );
// Gerber format can use specific file ext, depending on layers
// (now not a good practice, because the official file ext is .gbr)
if( GetPlotOptions().GetFormat() == PLOT_FORMAT_GERBER &&
GetPlotOptions().GetUseGerberProtelExtensions() )
fileExt = GetGerberProtelExtension( GetLayer() );
// Build plot filenames from the board name and layer names:
BuildPlotFileName( &m_plotFile, outputDir.GetPath(), aSuffix, fileExt );
2012-08-29 16:59:50 +00:00
m_plotter = StartPlotBoard( m_board, &GetPlotOptions(), ToLAYER_ID( GetLayer() ),
m_plotFile.GetFullPath(), aSheetDesc );
2012-08-29 16:59:50 +00:00
}
2012-08-29 16:59:50 +00:00
return( m_plotter != NULL );
}
2012-08-29 16:59:50 +00:00
bool PLOT_CONTROLLER::PlotLayer()
2012-08-29 16:59:50 +00:00
{
LOCALE_IO toggle;
// No plot open, nothing to do...
if( !m_plotter )
return false;
// Fully delegated to the parent
PlotOneBoardLayer( m_board, m_plotter, ToLAYER_ID( GetLayer() ), GetPlotOptions() );
2012-08-29 16:59:50 +00:00
return true;
}
2012-08-29 16:59:50 +00:00
void PLOT_CONTROLLER::SetColorMode( bool aColorMode )
{
if( !m_plotter )
return;
m_plotter->SetColorMode( aColorMode );
}
bool PLOT_CONTROLLER::GetColorMode()
{
if( !m_plotter )
return false;
return m_plotter->GetColorMode();
}