Show warning dialog message when is not possible to create the BOM file.

eeschema/dialogs/dialog_bom.cpp

@@ -342,8 +342,13 @@ void DIALOG_BOM::OnRunGenerator( wxCommandEvent& event )
         m_parent->SetExecFlags( wxEXEC_SHOW_CONSOLE );
 #endif
 
+    bool status = false;
+
     if( m_parent->ReadyToNetlist( _( "Generating BOM requires a fully annotated schematic." ) ) )
-        m_parent->WriteNetListFile( NET_TYPE_BOM, fullfilename, GNL_OPT_BOM|GNL_ALL, &reporter );
+        status = m_parent->WriteNetListFile( NET_TYPE_BOM, fullfilename, GNL_OPT_BOM|GNL_ALL, &reporter );
+
+    if( !status )
+        DisplayError( this, _( "Failed to create file." ) );
 
     m_Messages->SetValue( reportmsg );
 

eeschema/netlist_exporters/netlist_generator.cpp

@@ -150,6 +150,7 @@ bool SCH_EDIT_FRAME::WriteNetListFile( int aFormat, const wxString& aFullFileNam
             if( diag != 0 )
             {
                 msg.Printf( _( "Command error. Return code %d." ), diag );
+                res = false;
                 aReporter->ReportTail( msg, RPT_SEVERITY_ERROR );
             }
             else
@@ -171,7 +172,9 @@ bool SCH_EDIT_FRAME::WriteNetListFile( int aFormat, const wxString& aFullFileNam
         }
         else
         {
-            wxExecute( commandLine, m_exec_flags );
+            int diag = wxExecute( commandLine, m_exec_flags );
+            if( diag != 0 )
+                res = false;
         }
 
         DefaultExecFlags(); // Reset flags to default after executing

eeschema/plugins/python_scripts/bom_csv_grouped_by_value.py

@@ -66,12 +66,14 @@ net = kicad_netlist_reader.netlist(sys.argv[1])
 
 # Open a file to write to, if the file cannot be opened output to stdout
 # instead
+canOpenFile = True
 try:
     f = kicad_utils.open_file_writeUTF8(sys.argv[2], 'w')
 except IOError:
     e = "Can't open output file for writing: " + sys.argv[2]
     print( __file__, ":", e, sys.stderr )
     f = sys.stdout
+    canOpenFile = False
 
 # subset the components to those wanted in the BOM, controlled
 # by <configure> block in kicad_netlist_reader.py
@@ -151,3 +153,6 @@ for group in grouped:
     writerow( out, row  )
 
 f.close()
+
+if not canOpenFile:
+    sys.exit(1)

eeschema/plugins/python_scripts/bom_csv_grouped_by_value_with_fp.py

@@ -32,12 +32,14 @@ net = kicad_netlist_reader.netlist(sys.argv[1])
 
 # Open a file to write to, if the file cannot be opened output to stdout
 # instead
+canOpenFile = True
 try:
     f = kicad_utils.open_file_writeUTF8(sys.argv[2], 'w')
 except IOError:
     e = "Can't open output file for writing: " + sys.argv[2]
     print(__file__, ":", e, sys.stderr)
     f = sys.stdout
+    canOpenFile = False
 
 # Create a new csv writer object to use as the output formatter
 out = csv.writer(f, lineterminator='\n', delimiter=',', quotechar='\"', quoting=csv.QUOTE_ALL)
@@ -76,4 +78,5 @@ for group in grouped:
         fromNetlistText( c.getField("Vendor") ),
         c.getDNPString()])
 
-
+if not canOpenFile:
+    sys.exit(1)

eeschema/plugins/python_scripts/bom_csv_grouped_extra.py

@@ -71,12 +71,14 @@ net = kicad_netlist_reader.netlist(sys.argv[1])
 
 # Open a file to write to, if the file cannot be opened output to stdout
 # instead
+canOpenFile = True
 try:
     f = kicad_utils.open_file_writeUTF8(sys.argv[2], 'w')
 except IOError:
     e = "Can't open output file for writing: " + sys.argv[2]
     print(__file__, ":", e, sys.stderr)
     f = sys.stdout
+    canOpenFile = False
 
 # Create a new csv writer object to use as the output formatter
 out = csv.writer(f, lineterminator='\n', delimiter=',', quotechar='\"', quoting=csv.QUOTE_ALL)
@@ -115,3 +117,6 @@ for group in grouped:
     out.writerow(row)
 
     index += 1
+
+if not canOpenFile:
+    sys.exit(1)

eeschema/plugins/python_scripts/bom_csv_sorted_by_ref.py

@@ -34,12 +34,14 @@ net = kicad_netlist_reader.netlist(sys.argv[1])
 
 # Open a file to write to, if the file cannot be opened output to stdout
 # instead
+canOpenFile = True
 try:
     f = kicad_utils.open_file_writeUTF8(sys.argv[2], 'w')
 except IOError:
     e = "Can't open output file for writing: " + sys.argv[2]
     print( __file__, ":", e, sys.stderr )
     f = sys.stdout
+    canOpenFile = False
 
 # Create a new csv writer object to use as the output formatter
 out = csv.writer(f, lineterminator='\n', delimiter=',', quotechar="\"", quoting=csv.QUOTE_ALL)
@@ -65,3 +67,6 @@ for c in components:
     writerow( out, [c.getRef(), c.getValue(), c.getFootprint(), c.getDatasheet(),
         c.getField("Manufacturer"), c.getField("Vendor"), c.getDNPString()])
 
+
+if not canOpenFile:
+    sys.exit(1)

eeschema/plugins/python_scripts/bom_html_grouped_by_value.py

@@ -49,12 +49,14 @@ net = kicad_netlist_reader.netlist(sys.argv[1])
 
 # Open a file to write to, if the file cannot be opened output to stdout
 # instead
+canOpenFile = True
 try:
     f = kicad_utils.open_file_write(sys.argv[2], 'wb')
 except IOError:
     e = "Can't open output file for writing: " + sys.argv[2]
     print(__file__, ":", e, file=sys.stderr)
     f = sys.stdout
+    canOpenFile = False
 
 components = net.getInterestingComponents( excludeBOM=True )
 
@@ -106,3 +108,6 @@ if sys.version_info[0] < 3:
 else:
     f.write(html.encode('utf-8'))
 f.close()
+
+if not canOpenFile:
+    sys.exit(1)

eeschema/plugins/python_scripts/bom_html_with_advanced_grouping.py

@@ -85,12 +85,14 @@ net = kicad_netlist_reader.netlist(sys.argv[1])
 
 # Open a file to write to, if the file cannot be opened output to stdout
 # instead
+canOpenFile = True
 try:
     f = kicad_utils.open_file_write(sys.argv[2], 'wb')
 except IOError:
     e = "Can't open output file for writing: " + sys.argv[2]
     print(__file__, ":", e, file=sys.stderr)
     f = sys.stdout
+    canOpenFile = False
 
 # Output a set of rows for a header providing general information
 html = html.replace('<!--SOURCE-->', net.getSource())
@@ -139,3 +141,6 @@ if sys.version_info[0] < 3:
 else:
     f.write(html.encode('utf-8'))
 f.close
+
+if not canOpenFile:
+    sys.exit(1)

eeschema/plugins/python_scripts/bom_txt_sorted_by_ref.py

@@ -33,12 +33,14 @@ net = kicad_netlist_reader.netlist(sys.argv[1])
 
 # Open a file to write to, if the file cannot be opened output to stdout
 # instead
+canOpenFile = True
 try:
     f = kicad_utils.open_file_writeUTF8(sys.argv[2], 'w' )
 except IOError:
     e = "Can't open output file for writing: " + sys.argv[2]
     print(__file__, ":", e, sys.stderr)
     f = sys.stdout
+    canOpenFile = False
 
 # Create a new csv writer object to use as the output formatter, although we
 # are created a tab delimited list instead!
@@ -65,3 +67,6 @@ writerow( out, ['Ref', 'Value', 'Part', 'Footprint', 'Description', 'Vendor', 'D
 for c in components:
     writerow( out, [c.getRef(), c.getValue(), c.getLibName() + ":" + c.getPartName(),
         c.getFootprint(), c.getDescription(), c.getField("Vendor"), c.getDNPString()])
+
+if not canOpenFile:
+    sys.exit(1)

eeschema/plugins/python_scripts/netlist_form_OrcadPcb2.py

@@ -34,12 +34,14 @@ netlist = kicad_netlist_reader.netlist(sys.argv[1])
 
 # Open a file to write to, if the file cannot be opened output to stdout
 # instead
+canOpenFile = True
 try:
     f = open(sys.argv[2], 'wb')
 except IOError:
     e = "Can't open output file for writing: " + sys.argv[2]
     print(__file__, ":", e, sys.stderr)
     f = sys.stdout
+    canOpenFile = False
 
 components = netlist.getInterestingComponents( excludeBoard=True )
 
@@ -108,3 +110,6 @@ row += '\n)\n'
 
 f.write(row.encode('utf-8'))
 f.close()
+
+if not canOpenFile:
+    sys.exit(1)

eeschema/plugins/python_scripts/netlist_form_cadstar.py

@@ -34,12 +34,14 @@ netlist = kicad_netlist_reader.netlist(sys.argv[1])
 
 # Open a file to write to, if the file cannot be opened output to stdout
 # instead
+canOpenFile = True
 try:
     f = open(sys.argv[2], 'wb')
 except IOError:
     e = "Can't open output file for writing: " + sys.argv[2]
     print(__file__, ":", e, sys.stderr)
     f = sys.stdout
+    canOpenFile = False
 
 components = netlist.getInterestingComponents( excludeBoard=True )
 
@@ -117,3 +119,6 @@ row += '\n.END\n'
 
 f.write(row.encode('utf-8'))
 f.close()
+
+if not canOpenFile:
+    sys.exit(1)

eeschema/plugins/python_scripts/netlist_form_pads-pcb-asc.py

@@ -34,12 +34,14 @@ netlist = kicad_netlist_reader.netlist(sys.argv[1])
 
 # Open a file to write to, if the file cannot be opened output to stdout
 # instead
+canOpenFile = True
 try:
     f = open(sys.argv[2], 'wb')
 except IOError:
     e = "Can't open output file for writing: " + sys.argv[2]
     print(__file__, ":", e, sys.stderr)
     f = sys.stdout
+    canOpenFile = False
 
 components = netlist.getInterestingComponents( excludeBoard=True )
 
@@ -96,3 +98,6 @@ row += '*END*\n'
 
 f.write(row.encode('utf-8'))
 f.close()
+
+if not canOpenFile:
+    sys.exit(1)

eeschema/plugins/python_scripts/round_robin.py

@@ -18,11 +18,16 @@ net = kicad_netlist_reader.netlist(sys.argv[1])
 
 # Open a file to write to, if the file cannot be opened output to stdout
 # instead
+canOpenFile = True
 try:
     f = open(sys.argv[2], 'w')
 except IOError:
     e = "Can't open output file for writing: " + sys.argv[2]
     print( __file__, ":", e, sys.stderr)
     f = sys.stdout
+    canOpenFile = False
 
 print(net.formatXML(), file=f)
+
+if not canOpenFile:
+    sys.exit(1)

eeschema/plugins/python_scripts/round_value_robin.py

@@ -61,14 +61,19 @@ net = kicad_netlist_reader.netlist(sys.argv[1])
 
 # Open a file to write to, if the file cannot be opened output to stdout
 # instead
+canOpenFile = True
 try:
     f = open(sys.argv[2], 'w')
 except IOError:
     e = "Can't open output file for writing: " + sys.argv[2]
     print(__file__, ":", e, file=sys.stderr)
     f = sys.stdout
+    canOpenFile = False
 
 for c in net.components:
     c.checkvalue()
 
 print(net.formatXML(), file=f)
+
+if not canOpenFile:
+    sys.exit(1)