3D-Viewer: Parameterize body board transparency

Fix/workarround raytracing render issues related with refraction

3d-viewer/3d_canvas/board_adapter.cpp

@@ -195,13 +195,6 @@ bool BOARD_ADAPTER::Is3DLayerEnabled( PCB_LAYER_ID aLayer ) const
 
     default:
         // the layer is an internal copper layer, used the visibility
-        if( GetFlag( FL_SHOW_BOARD_BODY ) && ( m_render_engine == RENDER_ENGINE::OPENGL_LEGACY ) )
-        {
-            // Do not render internal layers if it is overlap with the board
-            // (on OpenGL render)
-            return false;
-        }
-
         return m_board->IsLayerVisible( aLayer );
     }
 

3d-viewer/3d_rendering/3d_render_ogl_legacy/c3d_render_ogl_legacy.cpp

@@ -256,8 +256,6 @@ void C3D_RENDER_OGL_LEGACY::setupMaterials()
                                                          97.0f / 255.0f,
                                                          47.0f / 255.0f );
 
-        m_materials.m_EpoxyBoard.m_Diffuse   = m_boardAdapter.m_BoardBodyColor;
-
         m_materials.m_EpoxyBoard.m_Specular  = SFVEC3F( 18.0f / 255.0f,
                                                          3.0f / 255.0f,
                                                         20.0f / 255.0f );
@@ -303,7 +301,6 @@ void C3D_RENDER_OGL_LEGACY::setupMaterials()
 
         // Epoxy material
         m_materials.m_EpoxyBoard.m_Ambient   = matAmbientColor;
-        m_materials.m_EpoxyBoard.m_Diffuse   = m_boardAdapter.m_BoardBodyColor;
         m_materials.m_EpoxyBoard.m_Specular  = matSpecularColor;
         m_materials.m_EpoxyBoard.m_Shininess = matShininess;
         m_materials.m_EpoxyBoard.m_Emissive = SFVEC3F( 0.0f, 0.0f, 0.0f );
@@ -500,6 +497,38 @@ void init_lights(void)
 }
 
 
+void C3D_RENDER_OGL_LEGACY::render_board_body( bool aSkipRenderHoles )
+{
+    if( m_ogl_disp_list_board )
+    {
+        m_ogl_disp_list_board->ApplyScalePosition( -m_boardAdapter.GetEpoxyThickness3DU() / 2.0f,
+                                                   m_boardAdapter.GetEpoxyThickness3DU() );
+
+
+        m_materials.m_EpoxyBoard.m_Diffuse   = m_boardAdapter.m_BoardBodyColor;
+        m_materials.m_EpoxyBoard.m_Transparency = m_boardAdapter.m_BoardBodyColor.a;
+
+        OGL_SetMaterial( m_materials.m_EpoxyBoard, 1.0f );
+
+        m_ogl_disp_list_board->SetItIsTransparent( true );
+
+        if( (m_ogl_disp_list_through_holes_outer_with_npth) && (!aSkipRenderHoles) )
+        {
+            m_ogl_disp_list_through_holes_outer_with_npth->ApplyScalePosition(
+                    -m_boardAdapter.GetEpoxyThickness3DU() / 2.0f,
+                    m_boardAdapter.GetEpoxyThickness3DU() );
+
+            m_ogl_disp_list_board->DrawAllCameraCulledSubtractLayer(
+                        m_ogl_disp_list_through_holes_outer_with_npth,
+                        NULL );
+        }
+        else
+        {
+            m_ogl_disp_list_board->DrawAll();
+        }
+    }
+}
+
 bool C3D_RENDER_OGL_LEGACY::Redraw(
         bool aIsMoving, REPORTER* aStatusReporter, REPORTER* aWarningReporter )
 {
@@ -625,37 +654,6 @@ bool C3D_RENDER_OGL_LEGACY::Redraw(
     const bool skipRenderVias = aIsMoving &&
                                 m_boardAdapter.GetFlag( FL_RENDER_OPENGL_VIAS_DISABLE_ON_MOVE );
 
-    // Display board body
-    // /////////////////////////////////////////////////////////////////////////
-    if( m_boardAdapter.GetFlag( FL_SHOW_BOARD_BODY ) )
-    {
-        if( m_ogl_disp_list_board )
-        {
-            m_ogl_disp_list_board->ApplyScalePosition( -m_boardAdapter.GetEpoxyThickness3DU() / 2.0f,
-                                                       m_boardAdapter.GetEpoxyThickness3DU() );
-
-            OGL_SetMaterial( m_materials.m_EpoxyBoard, 1.0f );
-
-            m_ogl_disp_list_board->SetItIsTransparent( false );
-
-            if( (m_ogl_disp_list_through_holes_outer_with_npth) && (!skipRenderHoles) )
-            {
-                m_ogl_disp_list_through_holes_outer_with_npth->ApplyScalePosition(
-                        -m_boardAdapter.GetEpoxyThickness3DU() / 2.0f,
-                        m_boardAdapter.GetEpoxyThickness3DU() );
-
-                m_ogl_disp_list_board->DrawAllCameraCulledSubtractLayer(
-                            m_ogl_disp_list_through_holes_outer_with_npth,
-                            NULL );
-            }
-            else
-            {
-                m_ogl_disp_list_board->DrawAll();
-            }
-        }
-    }
-
-
     if( m_boardAdapter.GetFlag( FL_USE_REALISTIC_MODE ) )
     {
         // Draw vias and pad holes with copper material
@@ -683,15 +681,16 @@ bool C3D_RENDER_OGL_LEGACY::Redraw(
          ii != m_ogl_disp_lists_layers.end();
          ++ii )
     {
-
         const PCB_LAYER_ID layer_id = (PCB_LAYER_ID)(ii->first);
 
-        // Mask kayers are not processed here because they are a special case
+        // Mask layers are not processed here because they are a special case
         if( (layer_id == B_Mask) || (layer_id == F_Mask) )
             continue;
 
         // Do not show inner layers when it is displaying the board
-        if( m_boardAdapter.GetFlag( FL_SHOW_BOARD_BODY ) )
+        // and board body is full opaque
+        if( m_boardAdapter.GetFlag( FL_SHOW_BOARD_BODY ) &&
+            ( m_boardAdapter.m_BoardBodyColor.a < 0.01f ) )
         {
             if( (layer_id > F_Cu) && (layer_id < B_Cu) )
                 continue;
@@ -802,12 +801,17 @@ bool C3D_RENDER_OGL_LEGACY::Redraw(
         glPopMatrix();
     }
 
-
     // Render 3D Models (Non-transparent)
     // /////////////////////////////////////////////////////////////////////////
     render_3D_models( false, false );
     render_3D_models( true, false );
 
+    // Display board body
+    // /////////////////////////////////////////////////////////////////////////
+    if( m_boardAdapter.GetFlag( FL_SHOW_BOARD_BODY ) )
+    {
+        render_board_body( skipRenderHoles );
+    }
 
     // Display transparent mask layers
     // /////////////////////////////////////////////////////////////////////////

3d-viewer/3d_rendering/3d_render_ogl_legacy/c3d_render_ogl_legacy.h

@@ -150,6 +150,8 @@ private:
                                    bool aDrawMiddleSegments,
                                    bool aSkipRenderHoles );
 
+    void render_board_body( bool aSkipRenderHoles );
+
     void get_layer_z_pos( PCB_LAYER_ID aLayerID,
                           float &aOutZtop,
                           float &aOutZbot ) const;

3d-viewer/3d_rendering/3d_render_raytracing/c3d_render_createscene.cpp

@@ -168,7 +168,7 @@ void C3D_RENDER_RAYTRACING::setupMaterials()
                                               8.0f / 255.0f,
                                               10.0f / 255.0f ) ), // specular
                 0.1f * 128.0f,                                    // shiness
-                0.10f,                                            // transparency
+                m_boardAdapter.m_BoardBodyColor.a,                // transparency
                 0.0f );                                           // reflection
 
     m_materials.m_EpoxyBoard.SetAbsorvance( 10.0f );
@@ -364,6 +364,7 @@ void C3D_RENDER_RAYTRACING::reload( REPORTER* aStatusReporter, REPORTER* aWarnin
                                            &m_materials.m_EpoxyBoard,
                                            g_epoxyColor );
         #else
+
                     CLAYERITEM *objPtr = new CLAYERITEM( object2d_A,
                                                          m_boardAdapter.GetLayerBottomZpos3DU( F_Cu ),
                                                          m_boardAdapter.GetLayerBottomZpos3DU( B_Cu ) );
@@ -375,6 +376,7 @@ void C3D_RENDER_RAYTRACING::reload( REPORTER* aStatusReporter, REPORTER* aWarnin
                 }
                 else
                 {
+
                     CITEMLAYERCSG2D *itemCSG2d = new CITEMLAYERCSG2D(
                                 object2d_A,
                                 object2d_B,
@@ -390,6 +392,7 @@ void C3D_RENDER_RAYTRACING::reload( REPORTER* aStatusReporter, REPORTER* aWarnin
                     objPtr->SetMaterial( &m_materials.m_EpoxyBoard );
                     objPtr->SetColor( ConvertSRGBToLinear( (SFVEC3F)m_boardAdapter.m_BoardBodyColor ) );
                     m_object_container.Add( objPtr );
+
                 }
             }
 
@@ -974,7 +977,7 @@ void C3D_RENDER_RAYTRACING::reload( REPORTER* aStatusReporter, REPORTER* aWarnin
     }
     m_accelerator = 0;
 
-    m_accelerator = new CBVH_PBRT( m_object_container );
+    m_accelerator = new CBVH_PBRT( m_object_container, 8, SPLITMETHOD::MIDDLE );
 
     if( aStatusReporter )
     {

3d-viewer/3d_rendering/3d_render_raytracing/c3d_render_raytracing.cpp

@@ -1658,21 +1658,20 @@ SFVEC3F C3D_RENDER_RAYTRACING::shadeHit( const SFVEC3F &aBgColor,
                                          unsigned int aRecursiveLevel,
                                          bool is_testShadow ) const
 {
-    if( aRecursiveLevel > 2 )
-        return SFVEC3F( 0.0f );
-
-    SFVEC3F hitPoint = aHitInfo.m_HitPoint;
-
-    if( !m_isPreview )
-        hitPoint += aHitInfo.m_HitNormal * m_boardAdapter.GetNonCopperLayerThickness3DU() * 0.6f;
-
     const CMATERIAL *objMaterial = aHitInfo.pHitObject->GetMaterial();
     wxASSERT( objMaterial != NULL );
 
-    const SFVEC3F diffuseColorObj = aHitInfo.pHitObject->GetDiffuseColor( aHitInfo );
-
     SFVEC3F outColor = objMaterial->GetEmissiveColor() + objMaterial->GetAmbientColor();
 
+    if( aRecursiveLevel > 5 )
+        return outColor;
+
+    SFVEC3F hitPoint = aHitInfo.m_HitPoint;
+
+    hitPoint += aHitInfo.m_HitNormal * m_boardAdapter.GetNonCopperLayerThickness3DU() * 0.6f;
+
+    const SFVEC3F diffuseColorObj = aHitInfo.pHitObject->GetDiffuseColor( aHitInfo );
+
     const LIST_LIGHT &lightList = m_lights.GetList();
 
 #if USE_EXPERIMENTAL_SOFT_SHADOWS
@@ -1874,9 +1873,7 @@ SFVEC3F C3D_RENDER_RAYTRACING::shadeHit( const SFVEC3F &aBgColor,
             {
                 // This increase the start point by a "fixed" factor so it will work the
                 // same for all distances
-                const SFVEC3F startPoint = aRay.at( NextFloatUp(
+                const SFVEC3F startPoint = aRay.at( aHitInfo.m_tHit + m_boardAdapter.GetNonCopperLayerThickness3DU() * 0.25f );
-                                                    NextFloatUp(
-                                                    NextFloatUp( aHitInfo.m_tHit ) ) ) );
 
                 const unsigned int refractions_number_of_samples = objMaterial->GetNrRefractionsSamples();
 
@@ -1904,36 +1901,39 @@ SFVEC3F C3D_RENDER_RAYTRACING::shadeHit( const SFVEC3F &aBgColor,
                     HITINFO refractedHit;
                     refractedHit.m_tHit = std::numeric_limits<float>::infinity();
 
-                    SFVEC3F refractedColor = objMaterial->GetAmbientColor();
+
+                    SFVEC3F refractedColor = aBgColor;
 
                     if( m_accelerator->Intersect( refractedRay, refractedHit ) )
                     {
                         refractedColor = shadeHit( aBgColor,
                                                    refractedRay,
                                                    refractedHit,
-                                                   true,
+                                                   !aIsInsideObject,
                                                    aRecursiveLevel + 1,
                                                    false );
 
                         const SFVEC3F absorbance = ( SFVEC3F(1.0f) - diffuseColorObj ) *
                                                    (1.0f - objTransparency ) *
                                                    objMaterial->GetAbsorvance() *   // Adjust falloff factor
-                                                   -refractedHit.m_tHit;
+                                                   refractedHit.m_tHit;
 
-                        const SFVEC3F transparency = SFVEC3F( expf( absorbance.r ),
+                        const SFVEC3F transparency = 1.0f / ( absorbance + 1.0f );
-                                                              expf( absorbance.g ),
-                                                              expf( absorbance.b ) );
 
-                        sum_color += refractedColor * transparency * objTransparency;
+                        sum_color += refractedColor * transparency;
                     }
                     else
                     {
-                        sum_color += refractedColor * objTransparency;
+                        sum_color += refractedColor;
                     }
                 }
 
                 outColor = outColor * (1.0f - objTransparency) +
-                           (sum_color / SFVEC3F( (float)refractions_number_of_samples) );
+                           objTransparency * sum_color / SFVEC3F( (float)refractions_number_of_samples);
+            }
+            else
+            {
+                outColor = outColor * (1.0f - objTransparency) + objTransparency * aBgColor;
             }
         }
     }

3d-viewer/3d_rendering/3d_render_raytracing/shapes3D/clayeritem.cpp

@@ -45,6 +45,8 @@ CLAYERITEM::CLAYERITEM( const COBJECT2D* aObject2D, float aZMin, float aZMax )
     m_bbox.Set( SFVEC3F( bbox2d.Min().x, bbox2d.Min().y, aZMin ),
                 SFVEC3F( bbox2d.Max().x, bbox2d.Max().y, aZMax ) );
     m_bbox.ScaleNextUp();
+    m_bbox.Scale( 1.0001f );
+
     m_centroid = SFVEC3F( aObject2D->GetCentroid().x,
                           aObject2D->GetCentroid().y,
                           (aZMax + aZMin) * 0.5f );
@@ -221,6 +223,11 @@ bool CLAYERITEM::Intersect( const RAY &aRay, HITINFO &aHitInfo ) const
 
         if( m_object2d->Intersect( raySeg, &tOut, &outNormal ) )
         {
+            if( tOut > 0.99f ) // Workarround for refraction artifacts on board sides
+            {
+                return false;
+            }
+
             // The hitT is a hit value for the segment length 'start' - 'end',
             // so it ranges from 0.0 - 1.0. We now convert it to a 3D hit position
             // and calculate the real hitT of the ray.
@@ -256,8 +263,11 @@ bool CLAYERITEM::Intersect( const RAY &aRay, HITINFO &aHitInfo ) const
     }
     else
     {
-        // Started inside
 
+        // Disabled due to refraction artifacts
+        // this will mostly happen inside the board body
+#if 0
+        // Started inside
         const SFVEC3F boxHitPointStart = aRay.at( tBBoxStart );
         const SFVEC3F boxHitPointEnd = aRay.at( tBBoxEnd );
 
@@ -317,8 +327,8 @@ bool CLAYERITEM::Intersect( const RAY &aRay, HITINFO &aHitInfo ) const
                 }
             }
         }
+#endif
     }
-
     return false;
 }
 

3d-viewer/3d_viewer/eda_3d_viewer.cpp

@@ -940,18 +940,22 @@ bool EDA_3D_VIEWER::Set3DBoardBodyColorFromUser()
 {
     CUSTOM_COLORS_LIST colors;
 
-    colors.push_back( CUSTOM_COLOR_ITEM(  51/255.0,  43/255.0, 22/255.0, "FR4 natural, dark" ) );
+    colors.push_back( CUSTOM_COLOR_ITEM(  51/255.0,  43/255.0, 22/255.0, 1.0 - 0.1, "FR4 natural, dark" ) );
-    colors.push_back( CUSTOM_COLOR_ITEM( 109/255.0, 116/255.0, 75/255.0, "FR4 natural" ) );
+    colors.push_back( CUSTOM_COLOR_ITEM( 109/255.0, 116/255.0, 75/255.0, 1.0 - 0.1, "FR4 natural" ) );
-    colors.push_back( CUSTOM_COLOR_ITEM(  78/255.0,  14/255.0,  5/255.0, "brown/red" ) );
+    colors.push_back( CUSTOM_COLOR_ITEM(  78/255.0,  14/255.0,  5/255.0, 1.0 - 0.1, "brown/red" ) );
-    colors.push_back( CUSTOM_COLOR_ITEM( 146/255.0,  99/255.0, 47/255.0, "brown 1" ) );
+    colors.push_back( CUSTOM_COLOR_ITEM( 146/255.0,  99/255.0, 47/255.0, 1.0 - 0.1, "brown 1" ) );
-    colors.push_back( CUSTOM_COLOR_ITEM( 160/255.0, 123/255.0, 54/255.0, "brown 2" ) );
+    colors.push_back( CUSTOM_COLOR_ITEM( 160/255.0, 123/255.0, 54/255.0, 1.0 - 0.1, "brown 2" ) );
-    colors.push_back( CUSTOM_COLOR_ITEM( 146/255.0,  99/255.0, 47/255.0, "brown 3" ) );
+    colors.push_back( CUSTOM_COLOR_ITEM( 146/255.0,  99/255.0, 47/255.0, 1.0 - 0.1, "brown 3" ) );
-    colors.push_back( CUSTOM_COLOR_ITEM(  63/255.0, 126/255.0, 71/255.0, "green 1" ) );
+    colors.push_back( CUSTOM_COLOR_ITEM(  63/255.0, 126/255.0, 71/255.0, 1.0 - 0.1, "green 1" ) );
-    colors.push_back( CUSTOM_COLOR_ITEM( 117/255.0, 122/255.0, 90/255.0, "green 2" ) );
+    colors.push_back( CUSTOM_COLOR_ITEM( 117/255.0, 122/255.0, 90/255.0, 1.0 - 0.1, "green 2" ) );
 
-    if( Set3DColorFromUser( m_boardAdapter.m_BoardBodyColor, _( "Board Body Color" ), &colors ) )
+    if( Set3DColorFromUser( m_boardAdapter.m_BoardBodyColor, _( "Board Body Color" ), &colors, true ) )
     {
-        NewDisplay( true );
+        if( m_boardAdapter.RenderEngineGet() == RENDER_ENGINE::OPENGL_LEGACY )
+            m_canvas->Request_refresh();
+        else
+            NewDisplay( true );
+
         return true;
     }
 

common/settings/color_settings.cpp

@@ -201,7 +201,7 @@ COLOR_SETTINGS::COLOR_SETTINGS( wxString aFilename ) :
     // Colors for 3D viewer, which are used as defaults unless overridden by the board
     CLR( "3d_viewer.background_bottom", LAYER_3D_BACKGROUND_BOTTOM, COLOR4D( 0.4, 0.4, 0.5, 1.0 ) );
     CLR( "3d_viewer.background_top",    LAYER_3D_BACKGROUND_TOP,    COLOR4D( 0.8, 0.8, 0.9, 1.0 ) );
-    CLR( "3d_viewer.board",             LAYER_3D_BOARD,             COLOR4D( 0.2, 0.17, 0.09, 1.0 ) );
+    CLR( "3d_viewer.board",             LAYER_3D_BOARD,             COLOR4D( 0.2, 0.17, 0.09, 0.1 ) );
     CLR( "3d_viewer.copper",            LAYER_3D_COPPER,            COLOR4D( 0.7, 0.61, 0.0, 1.0 ) );
     CLR( "3d_viewer.silkscreen_bottom", LAYER_3D_SILKSCREEN_BOTTOM, COLOR4D( 0.9, 0.9, 0.9, 1.0 ) );
     CLR( "3d_viewer.silkscreen_top",    LAYER_3D_SILKSCREEN_TOP,    COLOR4D( 0.9, 0.9, 0.9, 1.0 ) );