minor changes. See changelog

3d-viewer/3d_read_mesh.cpp

@@ -53,7 +53,7 @@ int Struct3D_Master:: ReadData()
     }
 
     // Switch the locale to standard C (needed to print floating point numbers like 1.3)
-    setlocale( LC_NUMERIC, "C" );
+    SetLocaleTo_C_standard( );
     while( GetLine( file, line, &LineNum, 512 ) )
     {
         text = strtok( line, " \t\n\r" );
@@ -75,7 +75,7 @@ int Struct3D_Master:: ReadData()
     }
 
     fclose( file );
-    setlocale( LC_NUMERIC, "" );      // revert to the current  locale
+    SetLocaleTo_Default( );      // revert to the current  locale
     return 0;
 }
 

change_log.txt

@@ -5,6 +5,16 @@ Started 2007-June-11
 Please add newer entries at the top, list the date and your name with
 email address.
 
+2008-June-06 UPDATE   Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
+================================================================================
++all:
+    minor changes
+    added void SetLocaleTo_C_standard(void) and void SetLocaleTo_Default(void)
+    This is wrapper to the C setlocale( LC_NUMERIC, "C" )
+    and setlocale( LC_NUMERIC, "" )function,
+    but could make more easier an optional use of locale in kicad in floating point notations
+
+
 2008-May-30 UPDATE   Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
 ================================================================================
 +pcbnew

common/common.cpp

@@ -25,6 +25,39 @@ wxString GetBuildVersion()
 }
 
 
+/********************************/
+void SetLocaleTo_C_standard(void)
+/********************************/
+/** function SetLocaleTo_C_standard
+because kicad is internationalized, switch internatization to "C" standard
+i.e. uses the . (dot) as separator in print/read float numbers
+(some contries (France, Germany ..) use , (comma) as separator)
+This function must be called before read or write ascii files using float numbers in data
+the SetLocaleTo_C_standard function must be called after reading or writing the file
+
+This is wrapper to the C setlocale( LC_NUMERIC, "C" ) function,
+but could make more easier an optional use of locale in kicad
+*/
+{
+    setlocale( LC_NUMERIC, "C" );    // Switch the locale to standard C
+}
+
+/********************************/
+void SetLocaleTo_Default(void)
+/********************************/
+/** function SetLocaleTo_Default
+because kicad is internationalized, switch internatization to default
+to use the default separator in print/read float numbers
+(. (dot) but some contries (France, Germany ..) use , (comma) as separator)
+This function must be called after a call to SetLocaleTo_C_standard
+
+This is wrapper to the C setlocale( LC_NUMERIC, "" ) function,
+but could make more easier an optional use of locale in kicad
+*/
+{
+    setlocale( LC_NUMERIC, "" );      // revert to the current locale
+}
+
 /*********************************************************************************************/
 Ki_PageDescr::Ki_PageDescr( const wxSize& size, const wxPoint& offset, const wxString& name )
 /*********************************************************************************************/
@@ -285,8 +318,8 @@ wxString ReturnPcbLayerName( int layer_number, bool omitSpacePadding )
 /**************************************************************/
 
 /* Return the name of the layer number "layer_number".
- *  if "is_filefame" == TRUE, the name can be used for a file name
+ *  if omitSpacePadding == TRUE, the name can be used for a file name
- *  (not internatinalized, no space)
+ *  (no spaces, replaced by _)
  */
 {
     const unsigned LAYER_LIMIT = 29;
@@ -302,7 +335,7 @@ wxString ReturnPcbLayerName( int layer_number, bool omitSpacePadding )
         _( "Adhes Cop" ), _( "Adhes Cmp" ), _( "SoldP Cop" ), _( "SoldP Cmp" ),
         _( "SilkS Cop" ), _( "SilkS Cmp" ), _( "Mask Cop " ), _( "Mask Cmp " ),
         _( "Drawings " ), _( "Comments " ), _( "Eco1     " ), _( "Eco2     " ),
-        _( "Edges Pcb" ), _( "BAD INDEX" ),
+        _( "Edges Pcb" ), _( "BAD INDEX" )
     };
 
     if( (unsigned) layer_number > LAYER_LIMIT )
@@ -445,9 +478,9 @@ int GetTimeStamp()
 }
 
 
-/*************************************************/
+/**************************************************************/
 const wxString& valeur_param( int valeur, wxString& buf_texte )
-/*************************************************/
+/**************************************************************/
 
 /* Retourne pour affichage la valeur d'un parametre, selon type d'unites choisies
  *  entree : valeur en mils , buffer de texte

common/edaappl.cpp

@@ -264,6 +264,8 @@ void WinEDA_App::InitEDA_Appl( const wxString& name )
     {
     }
     
+    SetLocaleTo_Default( );     // Set locale option for separator used in float numbers
+
 #ifdef KICAD_PYTHON
     PyHandler::GetInstance()->SetAppName( name );
 #endif

cvpcb/loadcmp.cpp

@@ -81,9 +81,9 @@ MODULE * Module = NULL;
 			{
 				Module = new MODULE(m_Pcb);
 				// Switch the locale to standard C (needed to print floating point numbers like 1.3)
-				setlocale(LC_NUMERIC, "C");
+				SetLocaleTo_C_standard( );
 				Module->ReadDescr(lib_module, &LineNum);
-				setlocale(LC_NUMERIC, "");      // revert to the current  locale
+				SetLocaleTo_Default( );      // revert to the current  locale
 				Module->SetPosition(wxPoint(0,0) );
 				fclose(lib_module);
 				return(Module) ;

eeschema/dangling_ends.cpp

@@ -319,8 +319,6 @@ DanglingEndHandle* RebuildEndList( EDA_BaseStruct* DrawList )
         switch( DrawItem->Type() )
         {
         case TYPE_SCH_LABEL:
-            break;
-
         case TYPE_SCH_GLOBALLABEL:
         case TYPE_SCH_HIERLABEL:
                 #undef STRUCT

eeschema/plothpgl.cpp

@@ -568,10 +568,10 @@ void WinEDA_PlotHPGLFrame::Plot_Schematic_HPGL( int Select_PlotAll, int HPGL_She
         else
             PlotFileName = MakeFileName( dirbuf, g_DefaultSchematicFileName, wxT( ".plt" ) );
 
-        setlocale( LC_NUMERIC, "C" );
+        SetLocaleTo_C_standard( );
         InitPlotParametresHPGL( PlotOffset, g_PlotScaleX, g_PlotScaleY );
         Plot_1_Page_HPGL( PlotFileName, screen );
-        setlocale( LC_NUMERIC, "" );
+        SetLocaleTo_Default( );
         screen = (BASE_SCREEN*) screen->Pnext;
         if( Select_PlotAll == FALSE )
             break;

eeschema/plotps.cpp

@@ -481,7 +481,7 @@ void WinEDA_PlotPSFrame::PlotOneSheetPS( const wxString& FileName,
         return;
     }
 
-    setlocale( LC_NUMERIC, "C" );
+    SetLocaleTo_C_standard( );
     Line.Printf( _( "Plot: %s\n" ), FileName.GetData() );
     m_MsgBox->AppendText( Line );
 
@@ -610,7 +610,7 @@ void WinEDA_PlotPSFrame::PlotOneSheetPS( const wxString& FileName,
 
     /* fin */
     CloseFilePS( PlotOutput );
-    setlocale( LC_NUMERIC, "" );
+    SetLocaleTo_Default( );
 
     m_MsgBox->AppendText( wxT( "Ok\n" ) );
 }

gerbview/export_to_pcbnew.cpp

@@ -224,7 +224,7 @@ static int SavePcbFormatAscii( WinEDA_GerberFrame* frame, FILE* aFile,
     }
 
     // Switch the locale to standard C (needed to print floating point numbers like 1.3)
-    setlocale( LC_NUMERIC, "C" );
+    SetLocaleTo_C_standard( );
     
     // write the PCB heading
     fprintf( aFile, "PCBNEW-BOARD Version %d date %s\n\n", g_CurrentVersionPCB,
@@ -238,7 +238,7 @@ static int SavePcbFormatAscii( WinEDA_GerberFrame* frame, FILE* aFile,
     // the destructor should destroy all owned sub-objects
     delete pcb;
 
-    setlocale( LC_NUMERIC, "" );      // revert to the current locale
+    SetLocaleTo_Default( );      // revert to the current locale
     wxEndBusyCursor();
     return 1;
 }

gerbview/readgerb.cpp

@@ -154,7 +154,7 @@ bool WinEDA_GerberFrame::Read_GERBER_File( wxDC*           DC,
         wxSetWorkingDirectory( path );
 
     wxBusyCursor show_wait;
-    setlocale( LC_NUMERIC, "C" );
+    SetLocaleTo_C_standard( );
 
     while( TRUE )
     {
@@ -256,7 +256,7 @@ bool WinEDA_GerberFrame::Read_GERBER_File( wxDC*           DC,
     }
     fclose( gerber_layer->m_Current_File );
 
-    setlocale( LC_NUMERIC, "" );
+    SetLocaleTo_Default( );
 
     /* Init  DCodes list and perhaps read a DCODES file,
      * if the gerber file is only a RS274D file (without any aperture information)

include/common.h

@@ -355,6 +355,28 @@ class WinEDA_DrawPanel;
 
 /* COMMON.CPP */
 
+/** function SetLocaleTo_C_standard
+because kicad is internationalized, switch internatization to "C" standard
+i.e. uses the . (dot) as separator in print/read float numbers
+(some contries (France, Germany ..) use , (comma) as separator)
+This function must be called before read or write ascii files using float numbers in data
+the SetLocaleTo_C_standard function must be called after reading or writing the file
+
+This is wrapper to the C setlocale( LC_NUMERIC, "C" ) function,
+but could make more easier an optional use of locale in kicad
+*/
+void SetLocaleTo_C_standard(void);
+
+/** function SetLocaleTo_Default
+because kicad is internationalized, switch internatization to default
+to use the default separator in print/read float numbers
+(. (dot) but some contries (France, Germany ..) use , (comma) as separator)
+This function must be called after a call to SetLocaleTo_C_standard
+
+This is wrapper to the C setlocale( LC_NUMERIC, "" ) function,
+but could make more easier an optional use of locale in kicad
+*/
+void SetLocaleTo_Default(void);
 
 /**
  * Operator << overload

kicad/mainframe.cpp

@@ -248,6 +248,8 @@ void WinEDA_MainFrame::OnCloseWindow( wxCloseEvent& Event )
         m_Parent->m_HtmlCtrl = NULL;
     }
     
+    m_LeftWin->Show(false);
+
     Destroy();
 }
 

pcbnew/gen_drill_report_files.cpp

@@ -50,7 +50,7 @@ void GenDrillMapFile( BOARD* aPcb, FILE* aFile, const wxString& aFullFileName, w
     wxString        msg;
 
 
-    setlocale( LC_NUMERIC, "C" ); // Use the standard notation for float numbers
+    SetLocaleTo_C_standard( ); // Use the standard notation for float numbers
     g_PlotOrient = 0;
     /* calcul des dimensions et centre du PCB */
     aPcb->ComputeBoundaryBox();
@@ -357,7 +357,7 @@ void GenDrillMapFile( BOARD* aPcb, FILE* aFile, const wxString& aFullFileName, w
         break;
     }
 
-    setlocale( LC_NUMERIC, "" );    // Revert to local notation for float numbers
+    SetLocaleTo_Default( );    // Revert to local notation for float numbers
 
     g_PlotOrient = old_g_PlotOrient;
 }

pcbnew/gen_modules_placefile.cpp

@@ -144,7 +144,7 @@ void WinEDA_PcbFrame::GenModulesPosition( wxCommandEvent& event )
     }
 
     // Switch the locale to standard C (needed to print floating point numbers like 1.3)
-    setlocale( LC_NUMERIC, "C" );
+    SetLocaleTo_C_standard( );
 
     /* Affichage du bilan : */
     MsgPanel->EraseMsgBox();
@@ -250,7 +250,7 @@ void WinEDA_PcbFrame::GenModulesPosition( wxCommandEvent& event )
         fclose( LayerCu );
     }
     MyFree( Liste );
-    setlocale( LC_NUMERIC, "" );      // revert to the current  locale
+    SetLocaleTo_Default( );      // revert to the current  locale
 
     msg = wxT( "Cmp File: " ) + NameLayerCmp;
     if( GenCu )
@@ -294,7 +294,7 @@ void WinEDA_PcbFrame::GenModuleReport( wxCommandEvent& event )
     }
 
     // Switch the locale to standard C (needed to print floating point numbers like 1.3)
-    setlocale( LC_NUMERIC, "C" );
+    SetLocaleTo_C_standard( );
 
     /* Generation entete du fichier 'commentaires) */
     sprintf( Line, "## Module report - date %s\n", DateAndTime( Buff ) );
@@ -421,7 +421,7 @@ void WinEDA_PcbFrame::GenModuleReport( wxCommandEvent& event )
     /* Generation fin du fichier */
     fputs( "$EndDESCRIPTION\n", rptfile );
     fclose( rptfile );
-    setlocale( LC_NUMERIC, "" );      // revert to the current  locale
+    SetLocaleTo_Default( );      // revert to the current  locale
 }
 
 

pcbnew/gendrill.cpp

@@ -408,7 +408,7 @@ int WinEDA_DrillFrame::Create_Drill_File_EXCELLON( std::vector<HOLE_INFO>&  aHol
     float xt, yt;
     char  line[1024];
 
-    setlocale( LC_NUMERIC, "C" ); // Use the standard notation for float numbers
+    SetLocaleTo_C_standard( ); // Use the standard notation for float numbers
 
     Write_Excellon_Header( dest );
 
@@ -539,7 +539,7 @@ int WinEDA_DrillFrame::Create_Drill_File_EXCELLON( std::vector<HOLE_INFO>&  aHol
 
     Write_End_Of_File_Drill( dest );
 
-    setlocale( LC_NUMERIC, "" );  // Revert to locale float notation
+    SetLocaleTo_Default( );  // Revert to locale float notation
 
     return holes_count;
 }

pcbnew/ioascii.cpp

@@ -772,7 +772,7 @@ int WinEDA_PcbFrame::ReadPcbFile( FILE* File, bool Append )
     wxBusyCursor    dummy;
 
     // Switch the locale to standard C (needed to print floating point numbers like 1.3)
-    setlocale( LC_NUMERIC, "C" );
+    SetLocaleTo_C_standard( );
 
     NbDraw = NbTrack = NbZone = NbMod = NbNets = -1;
     m_Pcb->m_NbNets     = 0;
@@ -1003,7 +1003,7 @@ int WinEDA_PcbFrame::ReadPcbFile( FILE* File, bool Append )
         }
     }
 
-    setlocale( LC_NUMERIC, "" );      // revert to the current  locale
+    SetLocaleTo_Default( );      // revert to the current  locale
 
     Affiche_Message( wxEmptyString );
 
@@ -1035,7 +1035,7 @@ int WinEDA_PcbFrame::SavePcbFormatAscii( FILE* aFile )
     wxBeginBusyCursor();
 
     // Switch the locale to standard C (needed to print floating point numbers like 1.3)
-    setlocale( LC_NUMERIC, "C" );
+    SetLocaleTo_C_standard( );
 
     /* Ecriture de l'entete PCB : */
     fprintf( aFile, "PCBNEW-BOARD Version %d date %s\n\n", g_CurrentVersionPCB,
@@ -1047,7 +1047,7 @@ int WinEDA_PcbFrame::SavePcbFormatAscii( FILE* aFile )
 
     rc = m_Pcb->Save( aFile );
 
-    setlocale( LC_NUMERIC, "" );      // revert to the current locale
+    SetLocaleTo_Default( );      // revert to the current locale
     wxEndBusyCursor();
 
     if( !rc )

pcbnew/loadcmp.cpp

@@ -268,9 +268,9 @@ MODULE* WinEDA_BasePcbFrame::Get_Librairie_Module( wxWindow* winaff,
                 NewModule = new MODULE( m_Pcb );
 
                 // Switch the locale to standard C (needed to print floating point numbers like 1.3)
-                setlocale( LC_NUMERIC, "C" );
+                SetLocaleTo_C_standard( );
                 NewModule->ReadDescr( lib_module, &LineNum );
-                setlocale( LC_NUMERIC, "" );        // revert to the current  locale
+                SetLocaleTo_Default( );        // revert to the current  locale
                 if( Module == NULL )                /* 1er Module */
                 {
                     m_Pcb->m_Modules = NewModule;

pcbnew/muonde.cpp

@@ -449,7 +449,7 @@ void WinEDA_SetParamShapeFrame::ReadDataShapeDescr( wxCommandEvent& event )
     bufsize = 100;
     ptbuf   = PolyEdges = (double*) MyZMalloc( bufsize * 2 * sizeof(double) );
 
-    setlocale( LC_NUMERIC, "C" );
+    SetLocaleTo_C_standard( );
     int LineNum = 0;
     while( GetLine( File, Line, &LineNum, sizeof(Line) - 1 ) != NULL )
     {
@@ -504,7 +504,7 @@ void WinEDA_SetParamShapeFrame::ReadDataShapeDescr( wxCommandEvent& event )
         PolyEdges = NULL;
     }
     fclose( File );
-    setlocale( LC_NUMERIC, "" );      // revert to the current  locale
+    SetLocaleTo_Default( );      // revert to the current  locale
 
     ShapeScaleX *= unitconv;
     ShapeScaleY *= unitconv;

pcbnew/pcbcfg.h

@@ -36,7 +36,7 @@ static PARAM_CFG_INT PadDrillCfg
     wxT( "PadDrlX" ),                   /* Keyword */
     &g_Pad_Master.m_Drill.x,            /* Parameter address */
     320,                                /* Default value */
-    0, 0x7FFF                           /* Valeurs extremes */
+    0, 0x7FFF                           /* Min and max values*/
 );
 
 static PARAM_CFG_INT PadDimHCfg     //Pad Diameter / H Size
@@ -44,7 +44,7 @@ static PARAM_CFG_INT PadDimHCfg     //Pad Diameter / H Size
     wxT( "PadDimH" ),               /* Keyword */
     &g_Pad_Master.m_Size.x,         /* Parameter address */
     550,                            /* Default value */
-    0, 0x7FFF                       /* Valeurs extremes */
+    0, 0x7FFF                       /* Min and max values*/
 );
 
 static PARAM_CFG_INT PadDimVCfg
@@ -52,7 +52,7 @@ static PARAM_CFG_INT PadDimVCfg
     wxT( "PadDimV" ),           /* Keyword */
     &g_Pad_Master.m_Size.y,     /* Parameter address */
     550,                        /* Default value */
-    0, 0x7FFF                   /* Valeurs extremes */
+    0, 0x7FFF                   /* Min and max values*/
 );
 
 
@@ -61,7 +61,7 @@ static PARAM_CFG_INT PadFormeCfg
     wxT( "PadForm" ),               /* Keyword */
     &g_Pad_Master.m_PadShape,       /* Parameter address */
     PAD_CIRCLE,                     /* Default value */
-    0, 0x7F                         /* Valeurs extremes */
+    0, 0x7F                         /* Min and max values*/
 );
 
 static PARAM_CFG_INT PadMasqueLayerCfg
@@ -76,7 +76,7 @@ static PARAM_CFG_INT ViaDiametreCfg
     wxT( "ViaDiam" ),                           /* Keyword */
     &g_DesignSettings.m_CurrentViaSize,         /* Parameter address */
     450,                                        /* Default value */
-    0, 0xFFFF                                   /* Valeurs extremes */
+    0, 0xFFFF                                   /* Min and max values*/
 );
 
 static PARAM_CFG_INT ViaDrillCfg
@@ -84,7 +84,7 @@ static PARAM_CFG_INT ViaDrillCfg
     wxT( "ViaDril" ),                           /* Keyword */
     &g_DesignSettings.m_ViaDrill,               /* Parameter address */
     250,                                        /* Default value */
-    0, 0xFFFF                                   /* Valeurs extremes */
+    0, 0xFFFF                                   /* Min and max values*/
 );
 
 static PARAM_CFG_INT MicroViaDiametreCfg
@@ -92,7 +92,7 @@ static PARAM_CFG_INT MicroViaDiametreCfg
     wxT( "MViaDia" ),                               /* Keyword */
     &g_DesignSettings.m_CurrentMicroViaSize,        /* Parameter address */
     200,                                            /* Default value */
-    0, 1000                                         /* Valeurs extremes */
+    0, 1000                                         /* Min and max values*/
 );
 
 static PARAM_CFG_INT MicroViaDrillCfg
@@ -100,7 +100,7 @@ static PARAM_CFG_INT MicroViaDrillCfg
     wxT( "MViaDrl" ),                           /* Keyword */
     &g_DesignSettings.m_MicroViaDrill,          /* Parameter address */
     80,                                         /* Default value */
-    0, 800                                      /* Valeurs extremes */
+    0, 800                                      /* Min and max values*/
 );
 
 static PARAM_CFG_INT ViaShowHoleCfg
@@ -109,8 +109,8 @@ static PARAM_CFG_INT ViaShowHoleCfg
     wxT( "ViaSHole" ),                  /* Keyword */
     &DisplayOpt.m_DisplayViaMode,       /* Parameter address */
     VIA_SPECIAL_HOLE_SHOW,              /* Default value */
-    VIA_HOLE_NOT_SHOW,                  /* Valeurs extremes */
+    VIA_HOLE_NOT_SHOW,                  /* Min and max values*/
-    OPT_VIA_HOLE_END - 1                /* Valeurs extremes */
+    OPT_VIA_HOLE_END - 1                /* Min and max values*/
 );
 
 static PARAM_CFG_INT TrackClearenceCfg
@@ -118,7 +118,7 @@ static PARAM_CFG_INT TrackClearenceCfg
     wxT( "Isol" ),                                  /* Keyword */
     &g_DesignSettings.m_TrackClearence,             /* Parameter address */
     120,                                            /* Default value */
-    0, 0xFFFF                                       /* Valeurs extremes */
+    0, 0xFFFF                                       /* Min and max values*/
 );
 
 static PARAM_CFG_INT LayerCountCfg                      // Mask Working Layers
@@ -126,7 +126,7 @@ static PARAM_CFG_INT LayerCountCfg                      // Mask Working Layers
     wxT( "Countlayer" ),                                /* Keyword */
     &g_DesignSettings.m_CopperLayerCount,               /* Parameter address */
     2,                                                  /* Default value */
-    1, NB_COPPER_LAYERS                                 /* Valeurs extremes */
+    1, NB_COPPER_LAYERS                                 /* Min and max values*/
 );
 
 static PARAM_CFG_INT TrackWidthCfg
@@ -134,7 +134,7 @@ static PARAM_CFG_INT TrackWidthCfg
     wxT( "Lpiste" ),                                /* Keyword */
     &g_DesignSettings.m_CurrentTrackWidth,          /* Parameter address */
     170,                                            /* Default value */
-    2, 0xFFFF                                       /* Valeurs extremes */
+    2, 0xFFFF                                       /* Min and max values*/
 );
 
 static PARAM_CFG_INT RouteLayTopCfg     // First current working layer
@@ -142,7 +142,7 @@ static PARAM_CFG_INT RouteLayTopCfg     // First current working layer
     wxT( "RouteTo" ),                   /* Keyword */
     &Route_Layer_TOP,                   /* Parameter address */
     15,                                 /* Default value */
-    0, 15                               /* Valeurs extremes */
+    0, 15                               /* Min and max values*/
 );
 
 static PARAM_CFG_INT RouteLayBotCfg     // second current working layer
@@ -150,7 +150,7 @@ static PARAM_CFG_INT RouteLayBotCfg     // second current working layer
     wxT( "RouteBo" ),                   /* Keyword */
     &Route_Layer_BOTTOM,                /* Parameter address */
     0,                                  /* Default value */
-    0, 15                               /* Valeurs extremes */
+    0, 15                               /* Min and max values*/
 );
 
 static PARAM_CFG_INT TypeViaCfg
@@ -158,7 +158,7 @@ static PARAM_CFG_INT TypeViaCfg
     wxT( "TypeVia" ),                               /* Keyword */
     &g_DesignSettings.m_CurrentViaType,             /* Parameter address */
     VIA_THROUGH,                                    /* Default value */
-    0, 3                                            /* Valeurs extremes */
+    0, 3                                            /* Min and max values*/
 );
 
 static PARAM_CFG_BOOL Segm45Cfg     // Segm Pistes a 0, 45, 90 degres uniquement
@@ -177,6 +177,7 @@ static PARAM_CFG_BOOL Raccord45Cfg  // Generation automatique des Raccords a 45
 
 static PARAM_CFG_INT UnitCfg    // Units: 0 inch, 1 mm
 (
+    INSETUP,
     wxT( "Unite" ),             /* Keyword */
     &g_UnitMetric,              /* Parameter address */
     FALSE                       /* Default value */
@@ -184,6 +185,7 @@ static PARAM_CFG_INT UnitCfg    // Units: 0 inch, 1 mm
 
 static PARAM_CFG_BOOL SegmFillCfg
 (
+    INSETUP,
     wxT( "SegFill" ),                               /* Keyword */
     &DisplayOpt.DisplayPcbTrackFill,                /* Parameter address */
     TRUE                                            /* Default value */
@@ -191,6 +193,7 @@ static PARAM_CFG_BOOL SegmFillCfg
 
 static PARAM_CFG_BOOL NewTrackAfficheGardeCfg
 (
+    INSETUP,
     wxT( "NewAffG" ),               /* Keyword */
     &g_ShowIsolDuringCreateTrack,   /* Parameter address */
     TRUE                            /* Default value */
@@ -198,6 +201,7 @@ static PARAM_CFG_BOOL NewTrackAfficheGardeCfg
 
 static PARAM_CFG_BOOL TrackAfficheGardeCfg
 (
+    INSETUP,
     wxT( "SegAffG" ),               /* Keyword */
     &DisplayOpt.DisplayTrackIsol,   /* Parameter address */
     FALSE                           /* Default value */
@@ -205,6 +209,7 @@ static PARAM_CFG_BOOL TrackAfficheGardeCfg
 
 static PARAM_CFG_BOOL PadFillCfg
 (
+    INSETUP,
     wxT( "PadFill" ),               /* Keyword */
     &DisplayOpt.DisplayPadFill,     /* Parameter address */
     TRUE                            /* Default value */
@@ -212,6 +217,7 @@ static PARAM_CFG_BOOL PadFillCfg
 
 static PARAM_CFG_BOOL PadAfficheGardeCfg
 (
+    INSETUP,
     wxT( "PadAffG" ),               /* Keyword */
     &DisplayOpt.DisplayPadIsol,     /* Parameter address */
     TRUE                            /* Default value */
@@ -219,6 +225,7 @@ static PARAM_CFG_BOOL PadAfficheGardeCfg
 
 static PARAM_CFG_BOOL PadShowNumCfg
 (
+    INSETUP,
     wxT( "PadSNum" ),               /* Keyword */
     &DisplayOpt.DisplayPadNum,      /* Parameter address */
     TRUE                            /* Default value */
@@ -226,26 +233,29 @@ static PARAM_CFG_BOOL PadShowNumCfg
 
 static PARAM_CFG_INT AfficheContourModuleCfg    // Module Edges: fill/line/sketch
 (
+    INSETUP,
     wxT( "ModAffC" ),                           /* Keyword */
     &DisplayOpt.DisplayModEdge,                 /* Parameter address */
-    FILAIRE,                                    /* Default value */
+    FILLED,                                    /* Default value */
-    0, 2                                        /* Valeurs extremes */
+    0, 2                                        /* Min and max values*/
 );
 
 static PARAM_CFG_INT AfficheTexteModuleCfg  // Module Texts: fill/line/sketch
 (
+    INSETUP,
     wxT( "ModAffT" ),                       /* Keyword */
     &DisplayOpt.DisplayModText,             /* Parameter address */
-    FILAIRE,                                /* Default value */
+    FILLED,                                /* Default value */
-    0, 2                                    /* Valeurs extremes */
+    0, 2                                    /* Min and max values*/
 );
 
 static PARAM_CFG_INT AfficheTextePcbCfg     // PCB Texts: fill/line/sketch
 (
+    INSETUP,
     wxT( "PcbAffT" ),                       /* Keyword */
     &DisplayOpt.DisplayDrawItems,           /* Parameter address */
-    FILAIRE,                                /* Default value */
+    FILLED,                                /* Default value */
-    0, 2                                    /* Valeurs extremes */
+    0, 2                                    /* Min and max values*/
 );
 
 static PARAM_CFG_BOOL SegmPcb45Cfg  // Force 45 degrees for segments
@@ -260,7 +270,7 @@ static PARAM_CFG_INT TextePcbDimVCfg
     wxT( "TxtPcbV" ),                                                       /* Keyword */
     &g_DesignSettings.m_PcbTextSize.y,                                      /* Parameter address */
     600,                                                                    /* Default value */
-    TEXTS_MIN_SIZE, TEXTS_MAX_SIZE                                          /* Valeurs extremes */
+    TEXTS_MIN_SIZE, TEXTS_MAX_SIZE                                          /* Min and max values*/
 );
 
 static PARAM_CFG_INT TextePcbDimHCfg
@@ -268,7 +278,7 @@ static PARAM_CFG_INT TextePcbDimHCfg
     wxT( "TxtPcbH" ),                                                       /* Keyword */
     &g_DesignSettings.m_PcbTextSize.x,                                      /* Parameter address */
     600,                                                                    /* Default value */
-    TEXTS_MIN_SIZE, TEXTS_MAX_SIZE                                          /* Valeurs extremes */
+    TEXTS_MIN_SIZE, TEXTS_MAX_SIZE                                          /* Min and max values*/
 );
 
 static PARAM_CFG_SETCOLOR ColorLayer0Cfg   // CU Layer Color
@@ -556,7 +566,7 @@ static PARAM_CFG_INT TexteModDimVCfg
     wxT( "TxtModV" ),                               /* Keyword */
     &ModuleTextSize.y,                              /* Parameter address */
     500,                                            /* Default value */
-    TEXTS_MIN_SIZE, TEXTS_MAX_SIZE                  /* Valeurs extremes */
+    TEXTS_MIN_SIZE, TEXTS_MAX_SIZE                  /* Min and max values*/
 );
 
 static PARAM_CFG_INT TexteModDimHCfg
@@ -564,7 +574,7 @@ static PARAM_CFG_INT TexteModDimHCfg
     wxT( "TxtModH" ),               /* Keyword */
     &ModuleTextSize.x,              /* Parameter address */
     500,                            /* Default value */
-    TEXTS_MIN_SIZE, TEXTS_MAX_SIZE  /* Valeurs extremes */
+    TEXTS_MIN_SIZE, TEXTS_MAX_SIZE  /* Min and max values*/
 );
 
 static PARAM_CFG_INT TexteModWidthCfg
@@ -572,7 +582,7 @@ static PARAM_CFG_INT TexteModWidthCfg
     wxT( "TxtModW" ),               /* Keyword */
     &ModuleTextWidth,               /* Parameter address */
     100,                            /* Default value */
-    1, TEXTS_MAX_WIDTH              /* Valeurs extremes */
+    1, TEXTS_MAX_WIDTH              /* Min and max values*/
 );
 
 static PARAM_CFG_SETCOLOR ColorAncreModCfg
@@ -644,7 +654,7 @@ static PARAM_CFG_INT HPGLpenNumCfg
     wxT( "HPGLnum" ),               /* Keyword */
     &g_HPGL_Pen_Num,                /* Parameter address */
     1,                              /* Default value */
-    1, 16                           /* Valeurs extremes */
+    1, 16                           /* Min and max values*/
 );
 
 static PARAM_CFG_INT HPGLdiamCfg    // HPGL pen size (mils)
@@ -652,7 +662,7 @@ static PARAM_CFG_INT HPGLdiamCfg    // HPGL pen size (mils)
     wxT( "HPGdiam" ),               /* Keyword */
     &g_HPGL_Pen_Diam,               /* Parameter address */
     15,                             /* Default value */
-    0, 100                          /* Valeurs extremes */
+    0, 100                          /* Min and max values*/
 );
 
 static PARAM_CFG_INT HPGLspeedCfg   //HPGL pen speed (cm/s)
@@ -660,7 +670,7 @@ static PARAM_CFG_INT HPGLspeedCfg   //HPGL pen speed (cm/s)
     wxT( "HPGLSpd" ),               /* Keyword */
     &g_HPGL_Pen_Speed,              /* Parameter address */
     20,                             /* Default value */
-    0, 1000                         /* Valeurs extremes */
+    0, 1000                         /* Min and max values*/
 );
 
 static PARAM_CFG_INT HPGLrecouvrementCfg
@@ -668,7 +678,7 @@ static PARAM_CFG_INT HPGLrecouvrementCfg
     wxT( "HPGLrec" ),           /* Keyword */
     &g_HPGL_Pen_Recouvrement,   /* Parameter address */
     2,                          /* Default value */
-    0, 0x100                    /* Valeurs extremes */
+    0, 0x100                    /* Min and max values*/
 );
 
 static PARAM_CFG_BOOL HPGLcenterCfg     //HPGL Org Coord ( 0 normal, 1 Centre)
@@ -683,7 +693,7 @@ static PARAM_CFG_INT GERBERSpotMiniCfg  //Aperture Mini (mils)
     wxT( "GERBmin" ),                   /* Keyword */
     &spot_mini,                         /* Parameter address */
     15,                                 /* Default value */
-    1, 100                              /* Valeurs extremes */
+    1, 100                              /* Min and max values*/
 );
 
 static PARAM_CFG_INT VernisEpargneGardeCfg
@@ -691,7 +701,7 @@ static PARAM_CFG_INT VernisEpargneGardeCfg
     wxT( "VEgarde" ),                       /* Keyword */
     &g_DesignSettings.m_MaskMargin,         /* Parameter address */
     100,                                    /* Default value */
-    0, 0xFFFF                               /* Valeurs extremes */
+    0, 0xFFFF                               /* Min and max values*/
 );
 
 static PARAM_CFG_INT DrawSegmLargeurCfg
@@ -699,7 +709,7 @@ static PARAM_CFG_INT DrawSegmLargeurCfg
     wxT( "DrawLar" ),                               /* Keyword */
     &g_DesignSettings.m_DrawSegmentWidth,           /* Parameter address */
     120,                                            /* Default value */
-    0, 0xFFFF                                       /* Valeurs extremes */
+    0, 0xFFFF                                       /* Min and max values*/
 );
 
 static PARAM_CFG_INT EdgeSegmLargeurCfg
@@ -707,7 +717,7 @@ static PARAM_CFG_INT EdgeSegmLargeurCfg
     wxT( "EdgeLar" ),                               /* Keyword */
     &g_DesignSettings.m_EdgeSegmentWidth,           /* Parameter address */
     120,                                            /* Default value */
-    0, 0xFFFF                                       /* Valeurs extremes */
+    0, 0xFFFF                                       /* Min and max values*/
 );
 
 static PARAM_CFG_INT TexteSegmLargeurCfg
@@ -715,7 +725,7 @@ static PARAM_CFG_INT TexteSegmLargeurCfg
     wxT( "TxtLar" ),                            /* Keyword */
     &g_DesignSettings.m_PcbTextWidth,           /* Parameter address */
     120,                                        /* Default value */
-    0, 0xFFFF                                   /* Valeurs extremes */
+    0, 0xFFFF                                   /* Min and max values*/
 );
 
 static PARAM_CFG_INT ModuleSegmWidthCfg
@@ -723,7 +733,7 @@ static PARAM_CFG_INT ModuleSegmWidthCfg
     wxT( "MSegLar" ),               /* Keyword */
     &ModuleSegmentWidth,            /* Parameter address */
     120,                            /* Default value */
-    0, 0xFFFF                       /* Valeurs extremes */
+    0, 0xFFFF                       /* Min and max values*/
 );
 
 static PARAM_CFG_INT FormatPlotCfg
@@ -731,7 +741,7 @@ static PARAM_CFG_INT FormatPlotCfg
     wxT( "ForPlot" ),           /* Keyword */
     &format_plot,               /* Parameter address */
     1,                          /* Default value */
-    0, 3                        /* Valeurs extremes */
+    0, 3                        /* Min and max values*/
 );
 
 static PARAM_CFG_INT WTraitSerigraphiePlotCfg
@@ -739,7 +749,7 @@ static PARAM_CFG_INT WTraitSerigraphiePlotCfg
     wxT( "WpenSer" ),           /* Keyword */
     &g_PlotLine_Width,          /* Parameter address */
     10,                         /* Default value */
-    1, 10000                    /* Valeurs extremes */
+    1, 10000                    /* Min and max values*/
 );
 
 static PARAM_CFG_DOUBLE UserGrilleXCfg
@@ -747,7 +757,7 @@ static PARAM_CFG_DOUBLE UserGrilleXCfg
     wxT( "UserGrX" ),           /* Keyword */
     &g_UserGrid.x,              /* Parameter address */
     0.01,                       /* Default value */
-    0.0001, 100.0               /* Valeurs extremes (inches)*/
+    0.0001, 100.0               /* Min and max values(inches)*/
 );
 
 static PARAM_CFG_DOUBLE UserGrilleYCfg
@@ -755,7 +765,7 @@ static PARAM_CFG_DOUBLE UserGrilleYCfg
     wxT( "UserGrY" ),           /* Keyword */
     &g_UserGrid.y,              /* Parameter address */
     0.01,                       /* Default value */
-    0.0001, 100.0               /* Valeurs extremes  (inches)*/
+    0.0001, 100.0               /* Min and max values (inches)*/
 );
 
 static PARAM_CFG_INT UserGrilleUnitCfg
@@ -763,7 +773,7 @@ static PARAM_CFG_INT UserGrilleUnitCfg
     wxT( "UserGrU" ),               /* Keyword */
     &g_UserGrid_Unit,               /* Parameter address */
     1,                              /* Default value */
-    0, 1                            /* Valeurs extremes */
+    0, 1                            /* Min and max values*/
 );
 
 static PARAM_CFG_INT DivGrillePcbCfg
@@ -771,7 +781,7 @@ static PARAM_CFG_INT DivGrillePcbCfg
     wxT( "DivGrPc" ),               /* Keyword */
     &Pcbdiv_grille,                 /* Parameter address */
     1,                              /* Default value */
-    1, 10                           /* Valeurs extremes */
+    1, 10                           /* Min and max values*/
 );
 
 static PARAM_CFG_INT TimeOutCfg     //Duree entre Sauvegardes auto en secondes
@@ -779,7 +789,7 @@ static PARAM_CFG_INT TimeOutCfg     //Duree entre Sauvegardes auto en secondes
     wxT( "TimeOut" ),               /* Keyword */
     &g_TimeOut,                     /* Parameter address */
     600,                            /* Default value */
-    0, 60000                        /* Valeurs extremes */
+    0, 60000                        /* Min and max values*/
 );
 
 static PARAM_CFG_BOOL DisplPolairCfg
@@ -796,15 +806,16 @@ static PARAM_CFG_INT CursorShapeCfg
     wxT( "CuShape" ),               /* Keyword */
     &g_CursorShape,                 /* Parameter address */
     0,                              /* Default value */
-    0, 1                            /* Valeurs extremes */
+    0, 1                            /* Min and max values*/
 );
 
 static PARAM_CFG_INT PrmMaxLinksShowed
 (
+    INSETUP,
     wxT( "MaxLnkS" ),               /* Keyword */
     &g_MaxLinksShowed,              /* Parameter address */
     3,                              /* Default value */
-    0, 15                           /* Valeurs extremes */
+    0, 15                           /* Min and max values*/
 );
 
 static PARAM_CFG_BOOL ShowRatsnestCfg

pcbnew/plotgerb.cpp

@@ -74,7 +74,7 @@ void WinEDA_BasePcbFrame::Genere_GERBER( const wxString& FullFileName, int Layer
         return;
     }
 
-    setlocale( LC_NUMERIC, "C" );
+    SetLocaleTo_C_standard( );
 
     InitPlotParametresGERBER( g_PlotOffset, scale_x, scale_y );
 
@@ -135,7 +135,7 @@ void WinEDA_BasePcbFrame::Genere_GERBER( const wxString& FullFileName, int Layer
     }
 
     Fin_Trace_GERBER( this, dest );
-    setlocale( LC_NUMERIC, "" );
+    SetLocaleTo_Default( );
 }
 
 

pcbnew/plothpgl.cpp

@@ -69,7 +69,7 @@ void WinEDA_BasePcbFrame::Genere_HPGL( const wxString& FullFileName, int Layer )
         return;
     }
 
-    setlocale( LC_NUMERIC, "C" );
+    SetLocaleTo_C_standard( );
 
     Affiche_1_Parametre( this, 0, _( "File" ), FullFileName, CYAN );
 
@@ -185,7 +185,7 @@ void WinEDA_BasePcbFrame::Genere_HPGL( const wxString& FullFileName, int Layer )
 
     /* fin */
     CloseFileHPGL( dest );
-    setlocale( LC_NUMERIC, "" );
+    SetLocaleTo_Default( );
 }
 
 

pcbnew/plotps.cpp

@@ -53,7 +53,7 @@ void WinEDA_BasePcbFrame::Genere_PS( const wxString& FullFileName, int Layer, bo
         return;
     }
 
-    setlocale( LC_NUMERIC, "C" );
+    SetLocaleTo_C_standard( );
 
     Affiche_1_Parametre( this, 0, _( "File" ), FullFileName, CYAN );
 
@@ -226,7 +226,7 @@ void WinEDA_BasePcbFrame::Genere_PS( const wxString& FullFileName, int Layer, bo
 
     // fin
     CloseFilePS( dest );
-    setlocale( LC_NUMERIC, "" );
+    SetLocaleTo_Default( );
 }
 
 

pcbnew/router.cpp

@@ -573,7 +573,7 @@ void WinEDA_PcbFrame::ReadAutoroutedTracks( wxDC* DC )
         Affiche_Message( msg );
     }
 
-    setlocale( LC_NUMERIC, "C" );
+    SetLocaleTo_C_standard( );
 
     track_width = g_DesignSettings.m_CurrentTrackWidth;
     via_size    = g_DesignSettings.m_CurrentViaSize;
@@ -654,7 +654,7 @@ void WinEDA_PcbFrame::ReadAutoroutedTracks( wxDC* DC )
 
     fclose( File );
 
-    setlocale( LC_NUMERIC, "" );
+    SetLocaleTo_Default( );
 
     if( NbTrack == 0 )
         DisplayError( this, wxT( "Warning: No tracks" ), 10 );

pcbnew/specctra.cpp

@@ -3971,7 +3971,7 @@ int main( int argc, char** argv )
     SPECCTRA_DB     db;
     bool            failed = false;
 
-    setlocale( LC_NUMERIC, "C" );    // Switch the locale to standard C
+    SetLocaleTo_C_standard( );    // Switch the locale to standard C
 
     if( argc == 2 )
     {
@@ -4002,7 +4002,7 @@ int main( int argc, char** argv )
     db.SetFILE( stdout );
     pcb->Format( &db, 0 );
 
-    setlocale( LC_NUMERIC, "" );      // revert to the current locale
+    SetLocaleTo_Default( );      // revert to the current locale
 }
 
 #endif

pcbnew/specctra_export.cpp

@@ -82,7 +82,7 @@ void WinEDA_PcbFrame::ExportToSpecctra( wxCommandEvent& event )
 
     db.SetPCB( SPECCTRA_DB::MakePCB() );
 
-    setlocale( LC_NUMERIC, "C" );    // Switch the locale to standard C
+    SetLocaleTo_C_standard( );    // Switch the locale to standard C
 
     //  DSN Images (=Kicad MODULES and pads) must be presented from the
     //  top view.  So we temporarily flip any modules which are on the back
@@ -105,7 +105,7 @@ void WinEDA_PcbFrame::ExportToSpecctra( wxCommandEvent& event )
         errorText = ioe.errorText;
     }
 
-    setlocale( LC_NUMERIC, "" );      // revert to the current locale
+    SetLocaleTo_Default( );      // revert to the current locale
 
     // done assuredly, even if an exception was thrown and caught.
     db.RevertMODULEs( m_Pcb );

pcbnew/specctra_import.cpp

@@ -86,7 +86,7 @@ void WinEDA_PcbFrame::ImportSpecctraSession( wxCommandEvent& event )
 
     SPECCTRA_DB     db;
 
-    setlocale( LC_NUMERIC, "C" );    // Switch the locale to standard C
+    SetLocaleTo_C_standard( );    // Switch the locale to standard C
 
     try
     {
@@ -95,7 +95,7 @@ void WinEDA_PcbFrame::ImportSpecctraSession( wxCommandEvent& event )
     }
     catch( IOError ioe )
     {
-        setlocale( LC_NUMERIC, "" );    // revert to the current locale
+        SetLocaleTo_Default( );    // revert to the current locale
 
         ioe.errorText += '\n';
         ioe.errorText += _("BOARD may be corrupted, do not save it.");
@@ -106,7 +106,7 @@ void WinEDA_PcbFrame::ImportSpecctraSession( wxCommandEvent& event )
         return;
     }
 
-    setlocale( LC_NUMERIC, "" );    // revert to the current locale
+    SetLocaleTo_Default( );    // revert to the current locale
 
     m_SelTrackWidthBox_Changed = TRUE;
     m_SelViaSizeBox_Changed    = TRUE;

share/svg_print.cpp

@@ -507,9 +507,9 @@ bool WinEDA_PrintSVGFrame::DrawPage( const wxString& FullFileName, BASE_SCREEN*
         panel->m_ClipBox.SetWidth( 0x7FFFFF0 ); panel->m_ClipBox.SetHeight( 0x7FFFFF0 );
 
         g_IsPrinting = TRUE;
-        setlocale( LC_NUMERIC, "C" );   // Switch the locale to standard C (needed to print floating point numbers like 1.3)
+        SetLocaleTo_C_standard( );   // Switch the locale to standard C (needed to print floating point numbers like 1.3)
         panel->PrintPage( &dc, m_Print_Sheet_Ref, m_PrintMaskLayer );
-        setlocale( LC_NUMERIC, "" );    // revert to the current  locale
+        SetLocaleTo_Default( );    // revert to the current  locale
         g_IsPrinting     = FALSE;
         panel->m_ClipBox = tmp;
     }