visibles work, update TODO.txt

CMakeLists.txt

@@ -19,9 +19,9 @@ option(KICAD_CYRILLIC "enable/disable building using cyrillic (needs unicode) (d
 option(wxUSE_UNICODE "enable/disable building unicode (default OFF)")
 option(KICAD_GOST "enable/disable building using GOST notation for multiple gates per package (default OFF)")
 
-
-option(KICAD_AUIMANAGER "Enable use of wxAuiManager (default ON)" ON)
-option(KICAD_AUITOOLBAR "Enable use of wxAuiToolBar (default ON)" ON)
+# these are now mandatorily set to ON, and now done so in CMakeModules/config.h.cmake
+#option(KICAD_AUIMANAGER "Enable use of wxAuiManager (default ON)" ON)
+#option(KICAD_AUITOOLBAR "Enable use of wxAuiToolBar (default ON)" ON)
 
 
 # Comment this out if you don't want to build with Python support.

CMakeModules/config.h.cmake

@@ -49,8 +49,13 @@
 #define strnicmp _strnicmp
 #endif
 
-
+#if 1
+// now mandatory, not configurable
+#define KICAD_AUIMANAGER        1
+#define KICAD_AUITOOLBAR        1
+#else
 #cmakedefine KICAD_AUIMANAGER 1
 #cmakedefine KICAD_AUITOOLBAR 1
+#endif
 
 #endif  /* __CONFIG_H__ */

TODO.txt

@@ -59,7 +59,7 @@ from folks with less than that minimum.
 
 PCBNew
 ------
-* Fix the color box which shows which layer is selected, or change tool tip.
+P1) Fix the color box which shows which layer is selected, or change tool tip.
     It is not tracking layer changes.  Look into WinEDA_PcbFrame::syncLayerBox(),
     which is probably where fix should go.
 
@@ -74,6 +74,17 @@ PCBNew
 *   Need to add polygon aperture type.
     Then example 2 in RS274xrevd_e.pdf will draw properly.
 
+*   Complete the migration to PCB_VISIBLEs and put them into the board,
+    including grid, so they are saved with a board.
+
+*   Write accessors for grid control, so that the write accessor can fire
+    change notifications to known listeners.  But again, grid boolean should
+    be in the board and accessed via BOARD::IsElementVisible( GRID_VISIBLE );
+
+*   Figure out why BOARD::IsElementVisible( PAD_{FR,BK}_VISIBLE ) is never tested,
+    and why the pads cannot be turned off.  Did something get broke?
+
+*   Via visibility does not respond to the LAYER_WIDGET.
 
 
 Dick:
@@ -95,5 +106,9 @@ L7) make the bitmapbutton a staticbitmap, and make its size dependent on
 
 L8) LAYER_WIDGET::GetBestSize() needs platform independence.
 
+L9) On board load, ReFill() is called, this should also update the Render
+    checkboxes and colors.  Will need to extend the widget API.
+
+
 Dick:
 L9) still thinking about background colors, easier now without wxformbuilder.

pcbnew/class_board.cpp

@@ -385,6 +385,8 @@ void BOARD::SetVisibleLayers( int aLayerMask )
 }
 
 
+// these are not tidy, since there are PCB_VISIBLEs that are not stored in the bitmap.
+
 void BOARD::SetVisibleElements( int aMask )
 {
     m_BoardSettings->SetVisibleElements( aMask );
@@ -397,6 +399,54 @@ int BOARD::GetVisibleElements() const
 }
 
 
+bool BOARD::IsElementVisible( int aPCB_VISIBLE ) const
+{
+    // @todo move these special cases into default, by moving globals into the board.
+    switch( aPCB_VISIBLE )
+    {
+/*
+    case GRID_VISIBLE:
+        myframe->m_Draw_Grid = isEnabled;
+        break;
+*/
+
+    case MOD_FR_VISIBLE:
+        return DisplayOpt.Show_Modules_Cmp;
+
+    case MOD_BK_VISIBLE:
+        return DisplayOpt.Show_Modules_Cu;
+
+    default:
+        return m_BoardSettings->IsElementVisible( aPCB_VISIBLE );
+    }
+}
+
+
+void BOARD::SetElementVisibility( int aPCB_VISIBLE, bool isEnabled )
+{
+    switch( aPCB_VISIBLE )
+    {
+/*
+    case GRID_VISIBLE:
+        myframe->m_Draw_Grid = isEnabled;
+        break;
+*/
+
+    // @todo move these special cases into default, by moving globals into the board.
+    case MOD_FR_VISIBLE:
+        DisplayOpt.Show_Modules_Cmp = isEnabled;
+        break;
+
+    case MOD_BK_VISIBLE:
+        DisplayOpt.Show_Modules_Cu = isEnabled;
+        break;
+
+    default:
+        m_BoardSettings->SetElementVisibility( aPCB_VISIBLE, isEnabled );
+    }
+}
+
+
 int BOARD::GetVisibleElementColor( int aPCB_VISIBLE )
 {
     int color = -1;

pcbnew/class_board.h

@@ -283,6 +283,9 @@ public:
      */
     void SetVisibleLayers( int aLayerMask );
 
+    // these 2 functions are not tidy at this time, since there are PCB_VISIBLEs that
+    // are not stored in the bitmap.
+
     /**
      * Function GetVisibleElements
      * is a proxy function that calls the correspondent function in m_BoardSettings
@@ -301,6 +304,25 @@ public:
      */
     void SetVisibleElements( int aMask );
 
+    /**
+     * Function IsElementVisible
+     * tests whether a given element category is visible. Keep this as an
+     * inline function.
+     * @param aPCB_VISIBLE is from the enum by the same name
+     * @return bool - true if the element is visible.
+     * @see enum PCB_VISIBLE
+     */
+    bool IsElementVisible( int aPCB_VISIBLE ) const;
+
+    /**
+     * Function SetElementVisibility
+     * changes the visibility of an element category
+     * @param aPCB_VISIBLE is from the enum by the same name
+     * @param aNewState = The new visibility state of the element category
+     * @see enum PCB_VISIBLE
+     */
+    void SetElementVisibility( int aPCB_VISIBLE, bool aNewState );
+
     /**
      * Function GetVisibleElementColor
      * returns the color of a pcb visible element.

pcbnew/pcbframe.cpp

@@ -137,8 +137,7 @@ PCB_LAYER_WIDGET::PCB_LAYER_WIDGET( WinEDA_PcbFrame* aParent, wxWindow* aFocusOw
             // this window frame must have an established BOARD, i.e. after SetBoard()
             renderRows[row].color = board->GetVisibleElementColor( renderRows[row].id );
         }
-        // @todo
-        // renderRows[row].state = GetBoard()->IsElementVisible( renderRows[row].id );
+        renderRows[row].state = board->IsElementVisible( renderRows[row].id );
     }
 
     AppendRenderRows( renderRows, DIM(renderRows) );
@@ -380,27 +379,13 @@ void PCB_LAYER_WIDGET::OnRenderEnable( int aId, bool isEnabled )
         // see todo above, don't really want anything except IsElementVisible() here.
 
     case GRID_VISIBLE:
+        // @todo, make read/write accessors for grid control so the write accessor can fire updates to
+        // grid state listeners.  I think the grid state should be kept in the BOARD.
         myframe->m_Draw_Grid = isEnabled;
         break;
 
-    case MOD_FR_VISIBLE:
-        DisplayOpt.Show_Modules_Cmp = isEnabled;
-        break;
-
-    case MOD_BK_VISIBLE:
-        DisplayOpt.Show_Modules_Cu = isEnabled;
-        break;
-
     default:
-
-        int visibleElements = brd->GetVisibleElements();
-
-        if( isEnabled )
-            visibleElements |= (1 << aId );
-        else
-            visibleElements &= ~(1 << aId);
-
-        brd->SetVisibleElements( visibleElements );
+        brd->SetElementVisibility( aId, isEnabled );
     }
 
     myframe->DrawPanel->Refresh();