Gerbview: Added support of arcs in polygons outlines. Need more tests, but works.

CHANGELOG.txt

@@ -3,6 +3,15 @@ KiCad ChangeLog 2009
 
 Please add newer entries at the top, list the date and your name with
 email address.
+
+2010-Jan-08 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
+================================================================================
+++Gerbview
+    Added support of arcs in polygons outlines.
+    Needed to show copper areas in some gerber files
+    Not fully tested but works better than without this support...
+
+
 2010-Jan-03 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
 ================================================================================
 ++pcbnew

common/build_version.cpp

@@ -6,7 +6,7 @@
 #endif
 
 #ifndef KICAD_BUILD_VERSION
-#define KICAD_BUILD_VERSION "(2010-01-05)"
+#define KICAD_BUILD_VERSION "(2010-01-08)"
 #endif
 
 #define VERSION_STABILITY "unstable"

eeschema/dialog_eeschema_config.cpp

@@ -166,7 +166,7 @@ void DIALOG_EESCHEMA_CONFIG::OnOkClick( wxCommandEvent& event )
         WinEDA_LibeditFrame::EnsureActiveLibExists();
     }
 
-    m_Parent->SaveProjectFile( this );
+    m_Parent->SaveProjectFile( this, false );
     EndModal( wxID_OK );
 }
 

eeschema/eeschema_config.cpp

@@ -43,7 +43,7 @@ void WinEDA_SchematicFrame::Process_Config( wxCommandEvent& event )
         break;
 
     case ID_CONFIG_SAVE:
-        SaveProjectFile( this );
+        SaveProjectFile( this, false );
         break;
 
     case ID_CONFIG_READ:
@@ -316,16 +316,18 @@ bool WinEDA_SchematicFrame::LoadProjectFile( const wxString& CfgFileName,
 /*
  * Save the Kicad project file (*.pro) settings specific to EESchema.
  */
-void WinEDA_SchematicFrame::SaveProjectFile( wxWindow* displayframe )
+void WinEDA_SchematicFrame::SaveProjectFile( wxWindow* displayframe, bool askoverwrite )
 {
     wxFileName fn;
 
     fn = g_RootSheet->m_AssociatedScreen->m_FileName  /*ConfigFileName*/;
     fn.SetExt( ProjectFileExtension );
 
+    int options = wxFD_SAVE;
+    if( askoverwrite )
+        options |= wxFD_OVERWRITE_PROMPT;
     wxFileDialog dlg( this, _( "Save Project Settings" ), wxGetCwd(),
-                      fn.GetFullName(), ProjectFileWildcard,
+                      fn.GetFullName(), ProjectFileWildcard, options );
-                      wxFD_SAVE | wxFD_OVERWRITE_PROMPT );
 
     if( dlg.ShowModal() == wxID_CANCEL )
         return;

gerbview/gerber_test_files/test_polygons_simple.gbr

@@ -0,0 +1,51 @@
+*
+%FSLAX35Y35*%
+%MOMM*%
+%ADD10C,0.085000*%
+%ADD11C,1.000000*%
+%IPPOS*%
+%LNl2p*%
+%LPD*%
+%SRX1Y1I0J0*%
+G01*
+G75*
+G36*
+X-824649Y824737D02*
+X-824642Y824746D01*
+X-824637Y824748D01*
+X-600285Y824596D01*
+G02X-596337Y813997I0J-6035D01*
+G01X-596759Y813502D01*
+X-599070Y812402D01*
+X-599079Y812403D01*
+X-600633Y812842D01*
+G03X-591714Y760887I-18257J-29877D01*
+G01X-589396Y761987D01*
+X-587850Y761553D01*
+G03X-543350Y814584I18275J29851D01*
+G02X-538846Y824554I4504J3968D01*
+G01X-387906Y824445D01*
+X-387901Y824439D01*
+X-387898Y718310D01*
+X-387892Y718296D01*
+X-387887Y718290D01*
+X-337968Y678268D01*
+X-337966Y678263D01*
+X-337746Y625972D01*
+G02X-347743Y621473I-6001J-23D01*
+G03X-394478Y621365I-23307J-26119D01*
+G02X-402955Y621809I-4016J4477D01*
+G01X-407368Y626784D01*
+X-409076Y628288D01*
+G02X-406164Y638849I3817J4630D01*
+G03X-421754Y706900I-5285J34600D01*
+G01X-699601D01*
+G03X-766967Y720229I-35002J0D01*
+G02X-771614Y718929I-2844J1211D01*
+G03X-817118Y687087I-10523J-33398D01*
+G03X-817151Y685566I34972J-1522D01*
+G01X-823562D01*
+X-824649Y824737D01*
+G37*
+
+M02*

gerbview/initpcb.cpp

@@ -19,15 +19,11 @@ bool WinEDA_GerberFrame::Clear_Pcb( bool query )
     if( GetBoard() == NULL )
         return FALSE;
 
-    if( query )
+    if( query && GetScreen()->IsModify() )
-    {
-        if( GetBoard()->m_Drawings || GetBoard()->m_Track
-            || GetBoard()->m_Zone )
     {
         if( !IsOK( this, _( "Current data will be lost?" ) ) )
             return FALSE;
     }
-    }
 
     GetBoard()->m_Drawings.DeleteAll();
 

gerbview/readgerb.cpp

@@ -115,7 +115,6 @@ bool WinEDA_GerberFrame::Read_GERBER_File( const wxString& GERBER_FullFileName,
     char*    text;
     int      layer;         /* current layer used in gerbview */
     GERBER*  gerber;
-    wxPoint  pos;
     int      error = 0;
 
     layer = GetScreen()->m_Active_Layer;
@@ -201,7 +200,7 @@ bool WinEDA_GerberFrame::Read_GERBER_File( const wxString& GERBER_FullFileName,
 
             case 'X':
             case 'Y':                   /* Move or draw command */
-                pos = gerber->ReadXYCoord( text );
+                 gerber->m_CurrentPos = gerber->ReadXYCoord( text );
                 if( *text == '*' )      // command like X12550Y19250*
                 {
                     gerber->Execute_DCODE_Command( this, text,
@@ -211,7 +210,7 @@ bool WinEDA_GerberFrame::Read_GERBER_File( const wxString& GERBER_FullFileName,
 
             case 'I':
             case 'J':       /* Auxiliary Move command */
-                pos = gerber->ReadIJCoord( text );
+                 gerber->m_IJPos = gerber->ReadIJCoord( text );
                 break;
 
             case '%':

gerbview/rs274d.cpp

@@ -9,8 +9,11 @@
 #include "macros.h"
 #include "gerbview.h"
 #include "pcbplot.h"
+#include "trigo.h"
 #include "protos.h"
 
+#include <math.h>
+
 #define IsNumber( x ) ( ( ( (x) >= '0' ) && ( (x) <='9' ) )   \
                        || ( (x) == '-' ) || ( (x) == '+' )  || ( (x) == '.' ) )
 
@@ -373,13 +376,143 @@ static void fillArcTRACK(  TRACK* aTrack, int Dcode_index, int aLayer,
 }
 
 
+/**
+ * Function fillArcPOLY
+ * creates an arc G code when found in poly outlines.
+ * <p>
+ * if multiquadrant == true : arc can be 0 to 360 degrees
+ *   and \a rel_center is the center coordinate relative to start point.
+ * <p>
+ * if multiquadrant == false arc can be only 0 to 90 deg,
+ *     and only in the same quadrant :
+ * <ul>
+ * <li> absolute angle 0 to 90 (quadrant 1) or
+ * <li> absolute angle 90 to 180 (quadrant 2) or
+ * <li> absolute angle 180 to 270 (quadrant 3) or
+ * <li> absolute angle 270 to 0 (quadrant 4)
+ * </ul><p>
+ * @param aPcb is the board.
+ * @param aLayer is the layer index to set into the TRACK
+ * @param aStart is the starting point
+ * @param aEnd is the ending point
+ * @param rel_center is the center coordinate relative to start point,
+ *   given in ABSOLUTE VALUE and the sign of values x et y de rel_center
+ *   must be calculated from the previously given constraint: arc only in the
+ * same quadrant.
+ * @param aDiameter The diameter of the round flash
+ * @param aWidth is the pen width.
+ * @param isDark True if flash is positive and should use a drawing
+ *   color other than the background color, else use the background color
+ *   when drawing so that an erasure happens.
+ * @return a pointer to the first segment created
+ */
+static SEGZONE * fillArcPOLY(  BOARD * aPcb, int aLayer,
+                           const wxPoint& aStart, const wxPoint& aEnd,
+                           const wxPoint& rel_center,
+                           bool clockwise, bool multiquadrant, bool isDark )
+{
+    /* in order to calculate arc parameters, we use fillArcTRACK
+     * so we muse create a dummy track and use its geometric parmeters
+     */
+    static TRACK dummyTrack(NULL);
+    SEGZONE * firstSegment = NULL;
+
+    fillArcTRACK(  &dummyTrack, 0, aLayer,
+                           aStart, aEnd,
+                           rel_center, 0,
+                           clockwise, multiquadrant, isDark );
+
+    // dummyTrack has right geometric parameters, and has its Y coordinates negated (to match the pcbnew Y axis).
+    // Approximate arc by 36 segments per 360 degree
+    const int increment_angle = 360/36;
+
+    wxPoint center;
+    center.x = dummyTrack.m_Param;
+    center.y = dummyTrack.GetSubNet();
+
+    // Calculate relative coordinates;
+    wxPoint start = dummyTrack.m_Start - center;
+    wxPoint end = dummyTrack.m_End - center;
+
+    /* Calculate angle arc
+     * angle is here clockwise because Y axis is reversed
+     */
+    double start_angle =
+        atan2( (double)start.y, (double)start.x );
+    start_angle = 180 * start_angle / M_PI;
+    double end_angle =
+        atan2( (double)end.y , (double)end.x );
+    end_angle = 180 * end_angle / M_PI;
+    double angle = start_angle - end_angle;
+
+//    D( printf( " >>>> st %d,%d angle %f, end %d,%d angle %f delta %f\n",
+//        start.x, start.y, start_angle, end.x, end.y, end_angle, angle ) );
+    if( !clockwise )
+    {
+        EXCHG(start, end);
+        D( printf( " >>>> reverse arc\n") );
+    }
+
+    // Normalize angle
+    while ( angle > 360.0 )
+        angle -= 360.0;
+    while ( angle < 0.0 )
+        angle += 360.0;
+
+    int count = (int) (angle / increment_angle );
+    if( count <= 0 )
+        count = 1;
+//    D( printf( " >>>> angle %f, cnt %d sens %d\n", angle, count, clockwise ) );
+
+    // calculate segments
+    wxPoint start_arc = start;
+    for( int ii = 1; ii <= count; ii++ )
+    {
+        wxPoint end_arc = start;
+        int rot = 10 * ii * increment_angle;    // rot is in 0.1 deg
+        if( ii < count )
+        {
+            if( clockwise )
+                RotatePoint(&end_arc, rot);
+            else
+                RotatePoint(&end_arc, -rot);
+        }
+        else
+            end_arc = end;
+        SEGZONE * edge_poly = new SEGZONE( aPcb );
+        if( firstSegment == NULL )
+            firstSegment = edge_poly;
+        aPcb->m_Zone.Append( edge_poly );
+//        D( printf( " >> Add arc %d rot %d, edge poly item %d,%d to %d,%d\n",
+//                ii, rot, start_arc.x, start_arc.y,end_arc.x, end_arc.y ); )
+
+        edge_poly->SetLayer( aLayer );
+        edge_poly->m_Width = 1;
+
+        edge_poly->m_Start = start_arc + center;
+        edge_poly->m_End = end_arc + center;
+
+        // the first track of each polygon has a netcode of zero,
+        // otherwise one.
+        // set netcode to 1. the calling function is responsible
+        // to set the first point to 0
+        edge_poly->SetNet( 1 );
+        if( !isDark )
+        {
+            edge_poly->m_Flags |= DRAW_ERASED;
+        }
+        start_arc = end_arc;
+    }
+
+    return firstSegment;
+}
+
+
+
+
 /* These routines read the text string point from Text.
  * After use, advanced Text the beginning of the sequence unread
  */
-
-
-/* Returns the current coord pointed to by Text (XnnnnYmmmm)
- */
 wxPoint GERBER::ReadXYCoord( char*& Text )
 {
     wxPoint pos = m_CurrentPos;
@@ -748,12 +881,12 @@ bool GERBER::Execute_G_Command( char*& text, int G_commande )
         break;
 
     case GC_SPECIFY_ABSOLUES_COORD:
-        m_Relative = false;         // false = absolute Coord, RUE = relative
+        m_Relative = false;         // false = absolute Coord, true = relative
                                     // Coord
         break;
 
     case GC_SPECIFY_RELATIVEES_COORD:
-        m_Relative = true;          // false = absolute Coord, RUE = relative
+        m_Relative = true;          // false = absolute Coord, true = relative
                                     // Coord
         break;
 
@@ -888,15 +1021,33 @@ bool GERBER::Execute_DCODE_Command( WinEDA_GerberFrame* frame,
 
     if( m_PolygonFillMode )    // Enter a polygon description:
     {
+        SEGZONE* edge_poly;
         switch( D_commande )
         {
         case 1:     // code D01 Draw line, exposure ON
             m_Exposure = true;
 
-            SEGZONE* edge_poly;
+            switch( m_Iterpolation )
+            {
+            case GERB_INTERPOL_ARC_NEG:
+            case GERB_INTERPOL_ARC_POS:
+                D( printf( "Add arc poly %d,%d to %d,%d fill %d interpol %d 360_enb %d\n",
+                        m_PreviousPos.x, m_PreviousPos.y, m_CurrentPos.x,
+                        m_CurrentPos.y, m_PolygonFillModeState, m_Iterpolation, m_360Arc_enbl ); )
+                edge_poly = fillArcPOLY( pcb, activeLayer, m_PreviousPos,
+                              m_CurrentPos, m_IJPos,
+                              ( m_Iterpolation == GERB_INTERPOL_ARC_NEG ) ?
+                              false : true, m_360Arc_enbl,
+                              !(m_LayerNegative ^ m_ImageNegative) );
+                edge_poly->SetNet( m_PolygonFillModeState );
+                break;
+
+            default:
                 edge_poly = new SEGZONE( pcb );
                 pcb->m_Zone.Append( edge_poly );
-            D( printf( "R:%p\n", edge_poly ); )
+                D( printf( "Add poly edge %d,%d to %d,%d fill %d\n",
+                        m_PreviousPos.x, m_PreviousPos.y,
+                        m_CurrentPos.x, m_CurrentPos.y, m_Iterpolation ); )
 
                 edge_poly->SetLayer( activeLayer );
                 edge_poly->m_Width = 1;
@@ -918,6 +1069,8 @@ bool GERBER::Execute_DCODE_Command( WinEDA_GerberFrame* frame,
                         edge_poly->m_Flags |= DRAW_ERASED;
                     D( printf( "\nm_Flags=0x%08X\n", edge_poly->m_Flags ); )
                 }
+                break;
+            }
 
             m_PreviousPos = m_CurrentPos;
             m_PolygonFillModeState = 1;

include/wxEeschemaStruct.h

@@ -89,7 +89,7 @@ public:
     void GeneralControle( wxDC* DC, wxPoint MousePositionInPixels );
 
     PARAM_CFG_ARRAY& GetProjectFileParameters( void );
-    void SaveProjectFile( wxWindow* displayframe );
+    void SaveProjectFile( wxWindow* displayframe, bool askoverwrite = true );
     bool LoadProjectFile( const wxString& CfgFileName, bool ForceRereadConfig );
 
     PARAM_CFG_ARRAY& GetConfigurationSettings( void );

pcbnew/dialog_layers_setup_base.cpp

@@ -1,5 +1,5 @@
 ///////////////////////////////////////////////////////////////////////////
-// C++ code generated with wxFormBuilder (version Dec 29 2008)
+// C++ code generated with wxFormBuilder (version Apr 16 2008)
 // http://www.wxformbuilder.org/
 //
 // PLEASE DO "NOT" EDIT THIS FILE!
@@ -50,6 +50,7 @@ DIALOG_LAYERS_SETUP_BASE::DIALOG_LAYERS_SETUP_BASE( wxWindow* parent, wxWindowID
 	bCaptionsSizer = new wxBoxSizer( wxHORIZONTAL );
 	
 	m_TitlePanel = new wxPanel( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxRAISED_BORDER|wxTAB_TRAVERSAL );
+	m_TitlePanel->SetForegroundColour( wxSystemSettings::GetColour( wxSYS_COLOUR_CAPTIONTEXT ) );
 	m_TitlePanel->SetBackgroundColour( wxSystemSettings::GetColour( wxSYS_COLOUR_ACTIVECAPTION ) );
 	
 	bCaptionsSizer->Add( m_TitlePanel, 1, wxEXPAND, 5 );

pcbnew/dialog_layers_setup_base.fbp

@@ -245,7 +245,7 @@
                                         <property name="bg">wxSYS_COLOUR_ACTIVECAPTION</property>
                                         <property name="context_help"></property>
                                         <property name="enabled">1</property>
-                                        <property name="fg"></property>
+                                        <property name="fg">wxSYS_COLOUR_CAPTIONTEXT</property>
                                         <property name="font"></property>
                                         <property name="hidden">0</property>
                                         <property name="id">wxID_ANY</property>

pcbnew/dialog_layers_setup_base.h

@@ -1,5 +1,5 @@
 ///////////////////////////////////////////////////////////////////////////
-// C++ code generated with wxFormBuilder (version Dec 29 2008)
+// C++ code generated with wxFormBuilder (version Apr 16 2008)
 // http://www.wxformbuilder.org/
 //
 // PLEASE DO "NOT" EDIT THIS FILE!