haskal
/
kicad
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Replace some errors with warnings in pad properties dialog

This commit is contained in:
Roberto Fernandez Bautista 2020-10-26 00:09:42 +00:00 committed by Wayne Stambaugh
parent 3d49f6d6f8
commit d75151a847
1 changed files with 39 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

46
pcbnew/dialogs/dialog_pad_properties.cpp
View File

@ -31,6 +31,7 @@
#include <class_module.h>
#include <confirm.h>
#include <convert_basic_shapes_to_polygon.h> // for enum RECT_CHAMFER_POSITIONS definition
#include <geometry/shape_segment.h>
#include <dialog_pad_properties.h>
#include <gal/graphics_abstraction_layer.h>
#include <dialogs/html_messagebox.h>
@ -1165,6 +1166,7 @@ bool DIALOG_PAD_PROPERTIES::padValuesOK()
bool skip_tstoffset = false; // the offset prm is not always tested
wxArrayString error_msgs;
wxArrayString warning_msgs;
wxString msg;
// Test for incorrect values
@ -1174,10 +1176,26 @@ bool DIALOG_PAD_PROPERTIES::padValuesOK()
error_msgs.Add( _( "Pad size must be greater than zero" ) );
}
if( (m_dummyPad->GetSize().x < m_dummyPad->GetDrillSize().x) ||
(m_dummyPad->GetSize().y < m_dummyPad->GetDrillSize().y) )
// Test hole size against pad size
LSET lset = m_dummyPad->GetLayerSet() & LSET::AllCuMask();
PCB_LAYER_ID layer = lset.Seq().at( 0 );
int maxError = m_board->GetDesignSettings().m_MaxError;
SHAPE_POLY_SET padOutline, drillOutline;
m_dummyPad->TransformShapeWithClearanceToPolygon( padOutline, layer, 0, maxError,
ERROR_LOC::ERROR_INSIDE );
const SHAPE_SEGMENT* drillShape = m_dummyPad->GetEffectiveHoleShape();
const SEG drillSeg = drillShape->GetSeg();
TransformOvalToPolygon( drillOutline, (wxPoint) drillSeg.A, (wxPoint) drillSeg.B,
drillShape->GetWidth(), maxError, ERROR_LOC::ERROR_INSIDE );
drillOutline.BooleanSubtract( padOutline, SHAPE_POLY_SET::POLYGON_MODE::PM_FAST );
if( ( drillOutline.BBox().GetWidth() > 0 ) || ( drillOutline.BBox().GetHeight() > 0 ) )
{
error_msgs.Add( _( "Incorrect value for pad drill: pad drill bigger than pad size" ) );
warning_msgs.Add( _( "Warning: Pad drill bigger than pad size or shapes do not overlap" ) );
skip_tstoffset = true; // offset prm will be not tested because if the drill value
// is incorrect the offset prm is always seen as incorrect, even if it is 0
}
@ -1226,12 +1244,13 @@ bool DIALOG_PAD_PROPERTIES::padValuesOK()
&& m_dummyPad->GetAttribute() != PAD_ATTRIB_NPTH )
{
// Note: he message is shown in an HTML window
msg = _( "Error: plated through holes must have a copper pad on at least one layer" );
error_msgs.Add( msg );
msg = _( "Warning: plated through holes should normally have a copper pad on at least one layer" );
warning_msgs.Add( msg );
}
}
if( !skip_tstoffset )
//Note: the below test might be unnecessary
if( !skip_tstoffset && m_dummyPad->GetShape() != PAD_SHAPE_CUSTOM )
{
wxPoint max_size;
max_size.x = std::abs( m_dummyPad->GetOffset().x );
@ -1270,7 +1289,7 @@ bool DIALOG_PAD_PROPERTIES::padValuesOK()
if( ( padlayers_mask[F_Cu] && padlayers_mask[B_Cu] ) ||
innerlayers_mask.count() != 0 )
error_msgs.Add( _( "Error: only one external copper layer allowed for SMD or Connector pads" ) );
warning_msgs.Add( _( "Warning: The pad has been defined in an inner layer only." ) );
}
break;
}
@ -1320,8 +1339,21 @@ bool DIALOG_PAD_PROPERTIES::padValuesOK()
{
HTML_MESSAGE_BOX dlg( this, _("Pad setup errors list" ) );
dlg.ListSet( error_msgs );
if( warning_msgs.GetCount() )
{
dlg.ListSet( warning_msgs );
}
dlg.ShowModal();
}
else
{
for( int i = 0; i < warning_msgs.GetCount(); ++i )
{
m_parent->ShowInfoBarWarning( warning_msgs[i] );
}
}
return error_msgs.GetCount() == 0;
}