Added pads show/hide from layer manager (option was existing in dialog, but not in code)

This commit is contained in:
charras 2010-01-26 18:02:03 +00:00
parent 969933fd67
commit da857f2774
2 changed files with 44 additions and 6 deletions

View File

@ -89,11 +89,6 @@ P2) Write accessors for all items in PCB_VISIBLE such as grid control, so that
* Need to add polygon aperture type.
Then example 2 in RS274xrevd_e.pdf will draw properly.
* Figure out why BOARD::IsElementVisible( PAD_{FR,BK}_VISIBLE ) is never tested,
and why the pads cannot be turned off. Did something get broke?
* Via visibility does not respond to the LAYER_WIDGET.
Dick:
D1) Get the nested quote support for DSNLEXER fixed up and committed.

View File

@ -38,6 +38,45 @@ void D_PAD::Draw( WinEDA_DrawPanel* panel, wxDC* DC, int draw_mode,
if( m_Flags & DO_NOT_DRAW )
return;
/* We can show/hide pads from the layer manager.
* options are show/hide pads on front and/or back side of the board
* For through pads, we hide them only if both sides are hidden.
* smd pads on back are hidden for all layers (copper and technical layers)
* on back side of the board
* smd pads on front are hidden for all layers (copper and technical layers)
* on front side of the board
* ECO, edge and Draw layers and not considered
*/
// Mask layers for Back side of board
#define BACK_SIDE_LAYERS \
(LAYER_BACK | ADHESIVE_LAYER_BACK | SOLDERPASTE_LAYER_BACK\
| SILKSCREEN_LAYER_BACK | SOLDERMASK_LAYER_BACK)
// Mask layers for Front side of board
#define FRONT_SIDE_LAYERS \
(LAYER_FRONT | ADHESIVE_LAYER_FRONT | SOLDERPASTE_LAYER_FRONT\
| SILKSCREEN_LAYER_FRONT | SOLDERMASK_LAYER_FRONT)
bool frontVisible = g_DesignSettings.IsElementVisible( PCB_VISIBLE(PAD_FR_VISIBLE) );
bool backVisible = g_DesignSettings.IsElementVisible( PCB_VISIBLE(PAD_BK_VISIBLE) );
if( !frontVisible && !backVisible )
return;
/* If pad are only on front side (no layer on back side)
* and if hide front side pads is enabled, do not draw
*/
if( !frontVisible && ( (m_Masque_Layer & BACK_SIDE_LAYERS) == 0 ) )
return;
/* If pad are only on back side (no layer on front side)
* and if hide back side pads is enabled, do not draw
*/
if( !backVisible && ( (m_Masque_Layer & FRONT_SIDE_LAYERS) == 0 ) )
return;
WinEDA_BasePcbFrame* frame = (WinEDA_BasePcbFrame*) panel->GetParent();
PCB_SCREEN* screen = frame->GetScreen();
if( frame->m_DisplayPadFill == FILLED )
@ -49,10 +88,14 @@ void D_PAD::Draw( WinEDA_DrawPanel* panel, wxDC* DC, int draw_mode,
#endif
if( m_Masque_Layer & LAYER_FRONT )
{
color = g_PadCMPColor;
}
if( m_Masque_Layer & LAYER_BACK )
{
color |= g_PadCUColor;
}
if( color == 0 ) /* Not on copper layer */
{