Commit Graph

456 Commits

Author SHA1 Message Date
Thomas Pointhuber de7b362695 Rewrite some code to work on Python 2.7 and 3+ 2018-10-19 09:59:03 +02:00
Seth Hillbrand f8784f30a8 Removing OpenMP
This commit finishes the removal of OpenMP from the KiCad codebase.
Removed in this commit are the OpenMP calls in 3d-viewer and
qa/polygon_triangulation as well as all references in CMakeLists.txt

std::thread is used instead for multithreaded computation
2018-09-21 12:44:20 -07:00
Damian Wrobel f85b1479aa Fix setting default cmake build type
Changes: Sets default cmake build type before
calling project(). Current version seems to follow
https://cmake.org/pipermail/cmake/2008-September/023808.html
however, it seems to miss the comment that:
"definition of CMAKE_BUILD_TYPE occurs in the PROJECT() command"
which means that setting cmake build type should happend prior
to calling PROJECT().

Fixes: lp:1785719
* https://bugs.launchpad.net/kicad/+bug/1785719
2018-09-05 08:12:03 -04:00
Wayne Stambaugh f52da8ed96 Pcbnew: enable scripting action menu build option by default.
Fixes lp:1783690

https://bugs.launchpad.net/kicad/+bug/1783690
2018-08-21 12:54:13 -04:00
Maciej Suminski 01925fd6a7 Changed the OpenGL CMake preference to LEGACY
Certain distribution does not handle GLVND well, as the result the
accelerated canvas is not enabled. For the time being it is better to
keep using the legacy preference.

Thanks to Aurelio Lucchesi for investigating the cause.

Fixes: lp:1781581
* https://bugs.launchpad.net/kicad/+bug/1781581
2018-08-17 10:03:59 +02:00
jean-pierre charras 9a6fe2b8cd CMakeLists.txt: add a option (BUILD_SMALL_DEBUG_FILES, default off) to create smaller binaries in debug mode.
It forces link option -g1 instead og -g3 which allows basic debug.

This is especially useful on Mingw because binaries in debug build are very large:
_pcbnew.kiface: 1.25 Gb, small file option: 65Mb
2018-07-28 10:38:00 +02:00
John Beard 2e977ec369 Enable CTest tests and add qa_geometry as a test
This allows the use of `make test` or `ctest` to run all registered
tests.

The ChamferFillet/Fillet test is disabled for now as it fails.
2018-07-27 08:57:19 -04:00
Maciej Suminski 944d22c08a Fix detection of wxWidgets toolkit
wxWidgets_CONFIG_OPTIONS can be utilised to explicitly select GTK2 or GTK3. It
must be evaluated when querying the toolkit to avoid a mismatch between the
version actually used and the version KiCad assumes to be used.

Reapplied the original version. The previous patch has been modified
under an invalid assumption of being incompatible with msys2.
2018-07-27 09:08:42 +02:00
Marcus A 31f77fc040 Fix detection of wxWidgets toolkit
wxWidgets_CONFIG_OPTIONS can be utilised to explicitly select GTK2 or GTK3. It
must be evaluated when querying the toolkit to avoid a mismatch between the
version actually used and the version KiCad assumes to be used.
2018-07-26 17:23:28 +02:00
Marcus A d5f81c7255 Fix some typos in CMakeLists.txt 2018-07-26 16:47:52 +02:00
Marcus A 0dcc26f866 Update description of build options
Commit 93683d0021 changed the default build
options but did not update their description.
2018-07-26 16:47:52 +02:00
jean-pierre charras 72d1597201 DXF import: add import of DXF splines that are converted to Bezier curves.
Fix also a lot of bugs related to Bezier curves (S_CURVE shape in DRAW_SEGMENT class) in Pcbnew code.
Add missing code to handle these Bezier curves
2018-07-22 18:39:47 +02:00
Maciej Suminski 850aac5ec5 Set OpenGL_GL_PREFERENCE for CMake 3.11+ 2018-06-11 10:27:49 +02:00
Jean-Samuel Reynaud d4393b2813 Fix incorrect Eeschema BOM plugins install path on Linux.
Fixes lp:1697041

https://bugs.launchpad.net/kicad/+bug/1697041
2018-06-01 14:09:08 -04:00
Seth Hillbrand 584409b2ef Make OpenCascade more secondary
The opencascade patch intrusively checked against libraries but broke
some build scripts.  This restores the default cmake OCE behavior that was
changed by 2bab30d9a and makes the OpenCascade search truly secondary.
2018-05-15 06:40:25 -07:00
Seth Hillbrand 2bab30d9ac Allow Kicad to use OpenCascade
Adds the option of using OpenCascade not just the community edition.

Fixes: lp:1628950
* https://bugs.launchpad.net/kicad/+bug/1628950
2018-05-11 17:04:32 -07:00
Wayne Stambaugh 5d71153eab Fix macos build bug caused by commit 2f5fdcf3. 2018-04-30 15:47:50 -04:00
Simon Richter 2f5fdcf329 Don't reference CMAKE_INSTALL_PREFIX in installation paths
This is substituted at configuration time, creating an absolute path, which
breaks overriding CMAKE_INSTALL_PREFIX at installation time, breaking the
workflow for installation using GNU stow.
2018-04-30 10:32:15 -04:00
Seth Hillbrand b46fc7fe9c Adding option for Cmake-based DISTCC/CCACHE 2018-04-16 16:28:15 -07:00
Ievgenii Meshcheriakov 89bf02adb7 Define GLM_FORCE_CTOR_INIT during build
This ensures that GLM objects are still initialized correctly when new
version of this library are used (after 0.9.9-a2).

This also fixes display corruption in 3D-viewer with Raytracer.

Fixes: lp:1762379
* https://bugs.launchpad.net/kicad/+bug/1762379
2018-04-13 14:45:16 +02:00
Jon Evans b813eac254 Omit unnecessary scripts directory from MacOS build output 2018-03-30 22:56:51 -04:00
Bernhard Stegmaier 8f42e128da Fix missing C++-11 compiler flags when building on macOS with non-Xcode clang 2018-03-04 15:00:43 -05:00
Maciej Suminski fad0452c0e Fix builds with scripting disabled
Fixes: lp:1750853
* https://bugs.launchpad.net/kicad/+bug/1750853
2018-02-21 17:46:57 +01:00
Maciej Suminski dd04bcbcbf Make the wxWidgets toolkit test Linux specific
Other platforms (Windows, macOS) have only one base toolkit,
so there is no mismatch risk.
2018-02-21 11:44:32 +01:00
Maciej Suminski 1013f81608 Fix wxWidgets toolkit detection for msys2 builds 2018-02-20 20:33:02 +01:00
Maciej Suminski 792e9015ac CMakeLists: compare wxWidgets and wxPython toolkits
Having wxWidgets and wxPython build using different toolkits leads
to an unusable build. KiCad executables are linked against wxWidgets
shared libraries, which will be in conflict with wxPython ones that
are loaded at runtime. We cannot easily solve it, so at least warn
the users about expected problems.

More information:
https://forum.kicad.info/t/9493
https://bugs.launchpad.net/kicad/+bug/1746753
2018-02-20 17:51:50 +01:00
Maciej Suminski c3197a5906 CMakeLists: detect gtk3 using wx-config 2018-02-17 21:00:16 +01:00
Maciej Suminski 4561b2cba9 GTK3: Display a warning and enable wxGraphicsContext 2018-02-08 11:07:25 +01:00
Wayne Stambaugh 93683d0021 Enable all build configuration options ready for stable 5 release.
Enable Python scripting, OCE, and spice build configuration options.

Update compiling.md to reflect new option settings.
2017-12-29 17:38:42 -05:00
Tomasz Włostowski 8df299a6bc pcbnew: Optimized zone filling algorithm: code cleanup 2017-12-05 14:54:57 +01:00
Tomasz Włostowski 316ddadec1 pcbnew: Optimized zone filling algorithm. 2017-12-05 14:54:57 +01:00
Nick ?stergaard c74437a44e Remove unused custom cmake target
This target seems to only create empty makefiles, tested on linux. And I
can not find any references to it in any of the current CMakeLists. Lets
remove it.
2017-12-03 18:21:40 -05:00
Marvin Schmidt c21a2a8a55 build: Don't install *.bat scripts on Unix 2017-11-09 19:52:17 +01:00
Marvin Schmidt 8a62aeb18d build: Remove dead code 2017-11-09 19:52:17 +01:00
Marvin Schmidt f9516cb48c build: Use CMAKE_INSTALL_DATADIR 2017-11-09 19:52:17 +01:00
Marvin Schmidt b6c3d4eb32 build: Don't install INSTALL.txt 2017-11-09 19:52:17 +01:00
jean-pierre charras 4e391ef21c Housekeeping: remove no more in use options. 2017-11-02 21:01:32 +01:00
jean-pierre charras e2d3fcec02 Add support for custom pad shape. Full support in DRC and PnS.
add option to use shape or convex hull as clearance area in zones.
simplify code to handle clearance area
2017-09-19 09:02:53 +02:00
Lubomir Rintel 862711b71a Add AppStream metadata
This will ensure KiCad will be easily installable from the app stores such
as GNOME Software.

The screenshots probably need a better home. Not that it would matter
too much -- the Linux distributions do cache them with their feeds, so
the app store applications don't access them from this source directly.

Screenshots from the web [1] can't be used since they are too large for
use in the app store application. :(

[1] http://kicad-pcb.org/discover/screenshots/

Fixes lp:1323789

https://bugs.launchpad.net/kicad/+bug/1323789
2017-04-27 19:00:38 -04:00
Vlad Ivanov 1e25c47362 cmake: use GNUInstallDirs to obtain lib/lib64 path
Fixes lp:1679795

https://bugs.launchpad.net/kicad/+bug/1679795
2017-04-10 16:21:50 -04:00
jean-pierre charras c9ff885c1d Cmakelists: remove no longer used boost libraries from required boost components lists 2017-04-07 16:57:17 +02:00
Wayne Stambaugh 9c2ebf32f1 Initial symbol library table implementation prep work.
Add loading symbol library table code to schematic PROJECT object.

Fix minor issues with loading global symbol library table.

Add default symbol library path environment variable to the environment
variable list and change the variable name to KICAD_SYMBOL_DIR.

Add code to SCH_SCREENS to test if all library nicknames of the symbol
library IDs are empty.

Remove unnecessary KICAD_USE_SCH_IO_MANAGER build option.
2017-03-31 16:29:34 -04:00
Chris Pavlina 849b3c2a4b Add footprint select dropdown to component chooser, serious refactoring
- DIALOG_CHOOSE_COMPONENT has footprint select widget
- FOOTPRINT_SELECT_WIDGET
- FOOTPRINT_CHOICE widget (customized wxComboCtrl)
- FOOTPRINT_FILTER class
- FOOTPRINT_INFO rework:
    - FOOTPRINT_ASYNC_LOADER to load without freezing UI
    - Rewrite loader threads as queue-driven thread pool
    - Make FOOTPRINT_INFO available via kiway
- FP_LIB_TABLE::PrefetchLib
- Access to global fp-lib-table via kiway
- SYNC_QUEUE threadsafe queue template
- Remove KICAD_FOOTPRINT_SELECTOR build option
2017-03-24 09:20:27 -04:00
Tomasz Włostowski eedf7cb243 Switched coroutine library from Boost libcotext to custom libcontext.
Fixes lp:1658249

https://bugs.launchpad.net/kicad/+bug/1658249
2017-03-07 11:45:29 -05:00
jean-pierre charras e7e972804a Make show/hide icons in menus a run time option, instead of compil option. 2017-03-02 15:45:54 +01:00
Simon Richter 986c92f880 Remove unnecessary double define
CMake already sets NDEBUG by default for Release builds, no need to duplicate this.
2017-02-23 14:54:11 -05:00
jean-pierre charras 11dcb76fc9 Add -Wshadow compil option, if exists to warn about shadowed variables.
Swig auto generated .cxx file has a lot of shadowed variables, so this option cannot be used to compil all files.
2017-02-23 13:17:23 +01:00
Chris Pavlina 2632b1d1a0 Revamp component chooser and add footprint preview
This commit brings several changes:

- Add a footprint preview pane to the eeschema component selector
- Upgrade component list to wxTreeListCtrl
- Factor out wxTreeListCtrl subclass TWO_COLUMN_TREE_LIST which
  patches a column size bug
- Linkify datasheet URL in info pane
2017-02-18 21:39:55 -05:00
Simon Richter 632cce7aa7 Reduce minimum required Pixman version
The newest version is 0.34. 1.0 doesn't exist, this only worked because
there is no actual version test.
2017-02-01 19:22:36 -05:00
Jean-Samuel Reynaud 5ef3e5a15d Pcbnew: Add ACTION_PLUGINS class. It allows loading python scripts in footprint editor and run them from the Tools/External Plugins menu
This plugin mechanism is enabled only if option -DKICAD_SCRIPTING_ACTION_MENU=ON (it is off by default)
It imply -DKICAD_SCRIPTING=0N
This is currently for testing purposes only for developers, not yet for users.
2017-01-23 13:27:49 +01:00
Tomasz Włostowski da28e163d2 Optimizations/fixes to the VIEW/GAL classes:
- much faster Cairo rendering (outperforms legacy)
- improvements in VIEW update handling
- fixed issue with grid rendering in flip view mode
2016-12-12 16:45:52 +01:00
Wayne Stambaugh 03da56a9b5 Minor version string generation improvements.
Remove the KICAD_REPO_NAME option from the main cmake file and the
generated config.h file since it is no longer used.

Set the default branch name to "undefined" in CreateGitVersionHeader.cmake
instead of the KICAD_REPO_NAME option.

Remove generating KICAD_FULL_VERSION from CreateGitVersionHeader.cmake
and add it to WriteVersionHeader.cmake so that the default settings and
the new KiCadVersion.cmake definitions can be used to generate the full
version string as well.

Check to see if the branch name is set and only use the version to
generate the full version string.  This allows the use of the KiCad
version cmake file to create a version only string like "4.0.4" with
no trailing branch name.

Change build_version.cpp to use the full version string rather than
concatenating the version and branch strings.
2016-10-12 20:29:46 -04:00
decimad 4248a7ffce remove boost::thread dependency 2016-10-09 10:33:52 -04:00
John Beard 6504b7b55c Disable -Wsuggest-override for scripting files, but not other files
This allows the warning to be active for code which would benefit from
it, but not spew hundreds of warnings for code over which KiCad does not
have control of the override specifiers.
2016-10-05 10:43:56 -04:00
jean-pierre charras c9fec4a4ed Do not use -Wsuggest-override option if KICAD_SCRIPTING is enabled because it creates too many useless warnings when compiling pcbnewPYTHON_wrap.cxx 2016-09-30 18:38:23 +02:00
Simon Richter ff41c8f7cb Warn about missing override specifiers, if supported (gcc 5.1, clang 3.5) 2016-09-25 13:59:41 -04:00
Dick Hollenbeck 45f6f8b305 Remove experimental code added during swig work. 2016-09-22 10:51:29 -04:00
Dick Hollenbeck 7311f07eaf SWIG Improvements
*) Extend SWIG support deeper into the BOARD class.
*) Move swig *.i files into a directory identified for SWIG, in preparation
   for a parallel universe involving Phoenix's SIP.
*) Move swig files which will be common to both eeschema and pcbnew into
   common/swig.
*) Sketch out a "common" python module, and plan on dovetailing that into a
   libkicad_shared.{dll,so}
*) Add common/swig/ki_exceptions.i and define a macro HANDLE_EXCEPTIONS()
   which is to be applied to any function which needs C++ to python
   exception translation.
*) Move the test for SWIG tool into top level CMakeLists.txt file for use
   in all python modules beyond pcbnew, i.e. eeschema and common.
*) Add SWIG_MODULE_pcbnew_EXTRA_DEPS which generates a better Makefile, one
   which rebuilds the swig generated *.cxx file when one of its dependencies
   change.
*) Re-architect the board.i file so that it can be split into multiple *.i
   files easily.
*) Make some KIWAY from python progress, in preparation for Modular KiCad
   phase III.
2016-09-20 11:59:43 -04:00
Niki Guldbrand c689c8cc3f Remove redundant data in defines.
* Using CMAKE_INSTALL_PREFIX in KICAD_* install paths is redundant,
  because they are allready relative to CMAKE_INSTALL_PREFIX when no
  absolute path is given.
  Using an absolute path makes it harder to change the install
  path on the fly, without either rebuilding, or manually editing
  CMakeCache.txt

Signed-off-by: Niki Guldbrand <niki.guldbrand@gmail.com>
2016-09-16 09:09:56 -04:00
José Ignacio Romero 83ed3c933e Add KICAD_INSTALL_DEMOS CMake option
It is ON by default, determines wether to install the bundled demos
and examples.
2016-09-14 19:57:35 -04:00
Chris Pavlina 7318238daa Update version string formatting after git migration
It is no longer necessary (or sensible) to include a simulated bzr
revision number, and we can reliably get a branch name now. Therefore,
the new version strings look like:

(2016-08-26 revision 67230ac)-master
 |                   |        |
 |                   |        branch name, "HEAD" if not on a branch,
 |                   |          or "unknown" if no .git present
 |                   |
 |                   abbreviated commit hash, or no-git if no .git
 |                     present
 |
 date of commit, or date of build if no .git present

Signed-off-by: Chris Pavlina <pavlina.chris@gmail.com>
2016-09-09 20:19:54 -04:00
Nick Østergaard caafcde585 Add KICAD_ prefix to build switches
KICAD_ prefix was added to the USE_OCE and USE_SCH_IO_MANAGER build
switches together with a small description to the devdocs from
compiling.md.
2016-09-05 08:46:01 -04:00
Nick Østergaard c784d45ed7 Add new development build swtiches to version info
Add:
* KICAD_USE_SCH_IO_MANAGER
* KICAD_USE_OCE
2016-09-04 19:13:05 -04:00
Cirilo Bernardo b656a8180a Added 3D plugin for OCE; this plugin is activated by -DUSE_OCE=ON 2016-08-22 15:50:38 +10:00
Maciej Suminski 497b2a9442 CMake module for libngspice 2016-08-12 15:56:51 +02:00
Maciej Suminski 6d7a7a3233 KICAD_SPICE CMake flag 2016-08-11 14:42:13 +02:00
Tomasz Wlostowski 095af6e77a wip 2016-08-11 14:41:01 +02:00
Tomasz Wlostowski 2dd53b6a43 spice wip 2016-08-11 14:40:57 +02:00
Wayne Stambaugh 4ed346ea64 Eeschema: initial schematic I/O plugin.
* Factor out PROPERTIES object from the PCB plugin code and move it into
  common so it can be used by both the Pcbnew and Eeschema plugins.

* Add schematic I/O plugin manager for loading and saving schematic and
  component library files.

* Add initial attempt at a parser for current schematic file format.  This
  parser will be infinitely more strict than the current parser which is very
  forgiving in what it parses.

* Make minor changes to the base bitmap class to support the new parser.

* Add find root sheet support to sheet object to allow fetching the root
  sheet from any sheet in the stack.
2016-07-06 05:22:56 -04:00
Simon Wells 236f5369ef CMake: remove Curl dependency when github plugin build is disabled. 2016-06-27 09:10:28 -04:00
Chris Pavlina c13f80bb49 Remove unneeded compile option KICAD_KEEPCASE
Libraries have been 100% case-sensitive for a while now; there is no longer a
need to keep this option around. This will change nothing except for any
stragglers still manually specifying this old option.
2016-06-10 23:15:02 -04:00
José Ignacio Romero 2b00008109 Remove mimelnk files
Mimelnk files are not used by anything since KDE 3. Clean this up to
reduce confusion.
2016-05-30 08:33:19 -04:00
jean-pierre charras d18cdf1c53 merge 3d_initial_merge branch 2016-04-05 19:56:01 +02:00
Simon Richter 2d4845ddae Enable C++11 support. 2016-03-21 11:11:29 -04:00
Cirilo Bernardo d0a2080823 Merge with main branch r6601 2016-03-01 11:44:15 +11:00
Bernhard Stegmaier 5b0a250609 Fix compilation and install for OSX plus general code cleanup 2016-03-01 10:08:19 +11:00
Simon Wells 4d2a05856f Minor CMake configuration file fixes.
* Move add_directory()s in main CMakeList.txt after all find_package()
  macros are run so all flags in the main CMakeList.txt are propagated
  to the sub-folder CMakeList.txt files.
* Remove commented out include of config.h
* Make the link maps only build on linux as -${TO_LINKER},-cref
  -${TO_LINKER},-Map=blah just gives warnings on osx w/ clang
* Make the link maps only build with flag -DKICAD_MAKE_LINK_MAPS is
  defined during CMake configuration as they are highly specific.
* Moved the code for setting link maps into the main CMakeList.txt
  file to avoid duplication.
* Removed -D__ASSERTMACRO__ from osx as its no longer needed
* Removed a couple of other OSX only things that wouldn't work anyway
* Moved set (BU_CHMOD_BUNDLE_ITEMS) to the main CMakeList.txt as
  otherwise it would only work for the KiCad build not the other
  applications
* Made KICAD_SCRIPTING_MODULES enable KICAD_SCRIPTING as currently if
  you have modules enabled without the scripting base it will on build.
  This could be changed to a fatal error saying you need to also enable
  scripting but it seems unnecessary.
* Removed duplication of pcbnew.py install code under modules and
  scripting since you can't have modules without scripting now
2016-02-29 14:08:03 -05:00
Cirilo Bernardo 217a5f39e1 Resync with main branch r6449 2016-01-12 10:36:31 +11:00
jean-pierre charras 74b629fa19 Fix issues I created in rev 6442 (no issue on msys2/gcc5.3, but issues on Kubuntu 14.04/ gcc 4.8). I'll find a better fix later. 2016-01-11 10:13:13 +01:00
jean-pierre charras 41db57c5f0 pcbnew.py: fix error "NameError: name 'UNDEFINED_LAYER' is not defined" when running pcbnew/wxPython, which prevents from openning the Python console.
CMakeLists.txt: remove no more used boost libs, and add missing coroutine lib in list.
Fix 2 minor compil warnings.
2016-01-11 09:26:55 +01:00
Bernhard Stegmaier 7e2af163dd Silence unused-local-typedef warnings when building with clang 2016-01-10 11:17:06 -05:00
Cirilo Bernardo 43c2c7223b Sync with main branch r6421 2016-01-05 16:37:52 +11:00
Bernhard Stegmaier 8c78bd5fd8 OSX: legacy canvas rendering speed improvements.
* Enables USE_WX_GRAPHICS_CONTEXT for OSX by default.  This shouldn¡¯t be a
  major change because it seems to get used on OSX behind the scenes anyway.
  As a side effect, this might improve behavior with anti-aliasing because
  KiCad shifts drawing by (0.5, 0.5) into the middle of the virtual pixels so
  things may be less blurry.  It will still build without enabling
  USE_WX_GRAPHICS_CONTEXT, but the optimizations obviously won¡¯t be used.
* The optimizations currently only are effective when USE_WX_GRAPHICS_CONTEXT
  is enabled and OSX.  They might be also good for other platforms using
  USE_WX_GRAPHICS_CONTEXT because it aggregates some drawing primitives using
  paths wxGraphicsContext provides.
* It adds some #ifdefs for disabling the wxGraphicsContext stuff when
  USE_WX_GRAPHICS_CONTEXT isn¡¯t enabled.  If you hate #ifdefs, this also
  could be dropped but then it will always check if wxGraphicsContext can be
  applied.
2016-01-04 15:13:10 -05:00
Wayne Stambaugh c68790751a Developer documentation and other minor fixes.
* Update the developer road map document.
* Update the compiling KiCad from source document to reflect recent build
  changes.
* Change Cairo library version to 1.8.8 to fix build issues on CentOS 6.
2016-01-04 10:23:28 -05:00
Wayne Stambaugh c751bf60bc Remove Boost library building and other build improvements.
* Remove download and build Boost from source and all CMake boost source build
  dependencies.
* Make FindCairo.cmake use pkg-config when it's available not just all
  platforms except windows.
* Add version checking to FindCairo.cmake.
* Change find GML version to 0.9.5.1 which is the current version in Ubuntu
  14.04 LTS.
* Update required Cairo version to 1.12.1.
2016-01-03 15:33:09 -05:00
Cirilo Bernardo 07bd4cbc04 + Resync with main r6397
+ Work in progress: VRML parser
2015-12-22 11:08:39 +11:00
Mark Roszko e47bc6883d Replace the avhttp library used by the github plugin with libcurl. 2015-12-21 15:30:33 -05:00
Cirilo Bernardo 1940bd71e4 Resync with main branch + fix MSWin build (accidental inclusion of dlfcn.h) 2015-12-15 10:56:11 +11:00
Cirilo Bernardo a2fe783f53 Finished refactor and introduction of generic Plugin scheme 2015-12-14 14:51:28 +11:00
Simon Richter 7cbf8a0bda CMake: remove older GCC optimization settings since boost::polygon is no longer used. 2015-12-12 14:56:55 -05:00
Wayne Stambaugh 204f025ff4 Build configuration fixes.
* Fix broken include path in FindGLM.cmake ( credit Cirilo Bernardo ).
* Fix if()/endif() warning in FindGLM.cmake.
* Remove trailing white space in FindGLM.cmake.
* Fix bug introduced in r6363 that inadvertently made OpenMP a required
  dependency instead of an optional dependency.
* Remove quiet flag for FindOpenMP to report findings.
2015-12-10 11:35:43 -05:00
Simon Richter e872585105 CMake: move find OpenMP so it can be found for all compilers not just GCC. 2015-12-09 15:53:52 -05:00
Cirilo Bernardo 41025154a6 Synced to main branch 2015-12-09 19:51:45 +11:00
unknown 77bc1a2dd1 Fix typo in CMakeLists.txt ( in CMake function for position independent code). 2015-12-09 09:03:59 +01:00
Cirilo Bernardo 2ba7c05cbf Resync with main branch and fixed to work with new symbol visibility rules 2015-12-09 09:52:02 +11:00
Simon Richter 32d4dae5ef CMake: use CMake's position independent code handling.
* Bump minimum CMake revision to 2.8.12.  The CMake position independent code
  handling was introduced in CMake 2.8.9 but 2.8.12 is current version in
  Ubuntu 14.04 LTS which is a very popular distro.
* CMake provides a simple declarative statement to enable PIC, so no compiler
  dependent handling is required.
* There is also no need to tell Boost to build with -fPIC, their build system
  is smart enough.
2015-12-08 09:17:23 -05:00
Maciej Suminski 231eaecf34 Removed the included GLM library, switched to the system one. 2015-12-08 10:56:53 +01:00
Mario Luzeiro 69cc788e8e + Removed glm source from kicad tree (Maciej / Cirilo)
+ Added renderer for 3D model preview (Mario)
+ Added 3d_cache including name resolver and modifications to 3D model dialogs (Cirilo)
2015-12-08 18:31:57 +11:00
Simon Richter 2869c9f49a CMake: use visibility definitions in provided by CMake when available.
CMake 3.0 defines two new variables:

 * CMAKE_CXX_VISIBILITY_PRESET and
 * CMAKE_VISIBILITY_INLINES_HIDDEN

to control whether symbols not explicitly tagged for export are implicitly
exported.  Because only version 3.3 and later also applies that to static
libraries when in 3.3 mode, compatibility code is added as well.

When the minimum required version is bumped to 3.3, this code becomes
obsolete and a warning is displayed that the compatibility code should be
removed as well.
2015-12-07 16:46:18 -05:00
Wayne Stambaugh b04f18b245 CMake: remove OpenSSL download and build dependency code.
* Removed some left over OSX_DEP_BUILDER code missed in my previous commit.
2015-12-03 10:59:02 -05:00