* Change all code references to pin sheet and sheet label to sheet pin to
more closely match the sheet pin object for improved code readability.
* Change menu and tool bar text from pin sheet to sheet pin for improved
user readability.
* Moved sheet pin place method to sheet pin object source file.
* Move last sheet pin stored state information into schematic frame object.
* Add Doxygen comments for the sheet pin editing methods.
* Remove specialized edit reference, value, and foot print field methods
from SCH_FRAME object.
* Improve general field method to handle all field types as this was
essentially the same code used in the three methods removed.
* Updated the the hot key and context menu handlers to use the new field
edit method.
* Minor Doxygen comment warning fixes.
* Push schematic back annotation code down into the appropriate class.
* Minor improvements to back annotate file selection code and user prompt
strings.
* Minor tool bar tool tip capitalization fixes.
* Change tool bar ID error from message dialog to a debug assert message.
* Add item clarification context menu to EESchema when multiple unresolved
items are found at the current cross hair position.
* Add collector class SCH_COLLECTOR for supporting multiple item hit testing.
* Removed bit wise masked filtering from schematic item hit testing.
* Removed all old hit testing functions and methods scattered about the
EESchema source code.
* Move terminal point test function into SCH_SCREEN object.
* Fixed bug in terminal point test when terminating a bus to a label.
* Define the < operator for sorting schematic items.
* Add area calculation method to EDA_Rect item.
* Add method for returning an item's bitmap for menu display purposes.
* Add method for returning an item's menu text for menu display purposes.
* Changed EDA_ITEMS container from boost::ptr_vector to std::vector.
* Factor coordinate string conversion code from EDA_DRAW_FRAME to function
CoordinateToString().
F1.) Allows you to disable a component from the Netlist. Useful for connectors etc.
To exclude a component from the Spice Netlist add [Spice_Netlist_Enabled] user FIELD set to: N
F2.) Allows you to adapt to simulation libraries that require the netlist node
sequence to be in a different order. To reorder the component spice node sequence
add [Spice_Node_Sequence] user FIELD and define sequence: 2,1,0 I am using
LTSpice, but this holds true for any SPICE subcircuit.
F1.) Allows you to disable a component from the Netlist. Useful for connectors etc.
To exclude a component from the Spice Netlist add [Spice_Netlist_Enabled] user FIELD set to: N
F2.) Allows you to adapt to simulation libraries that require the netlist node sequence to be in a different order.
To reorder the component spice node sequence add [Spice_Node_Sequence] user FIELD and define sequence: 2,1,0 I am using LTSpice, but this holds true for any SPICE subcircuit.
Note1: Patch maintains existing SpiceNetlister behavior as far as I can tell
------------------------------------------------------------------
Updated Patch from Prior release:
New Changes consists of:
1.) Now allowing user to put in less Nodes then exist on the actual part.
2.) Now echoing Schematic Sheet Netlist components come from. This helps users segment the netlist in to understandable blocks of code that mimic the schematic sheets.
3.) Retested.
* Set default button on all dialogs that do not already have a defined
default button. The only exception is the EESchema net list dialog
which needs converted over to wxFormBuilder and due to it's design makes
setting the default button in any tab other than the default tab
problematic.
* Fix escape key dialog handling bug in EESchema print post script
dialog.
* Move locate function code into schematic screen object.
* Move test for junction needed into schematic screen object.
* Move test for marking connected items into schematic screen object.
* Move delete item function code into schematic screen object.
* Move delete all markers code into schematic screen object.
* Add method for locating multiple items in schematic screen object.
* Fix minor bug in schematic field object hit test declaration.
* Initial encapsulation work on item picker object.
* Remove duplicate doxygen comments from item picker object source file.
* Factor change schematic component orientation code out of switch statement
into separate function.
* Remove redundant command events from schematic editor hot key handler.
* Change EDA_ITEM set flag function to set flag bits using logical or
instead of assignment.
* Add clear flag function to EDA_ITEM to clear flag bit using inverted
logical and.
* Factor change schematic text type code out of switch statement into
a single function call.
* Schematic text orientation function renaming improvements.
* Lots of small coding policy changes to updated files.
* Merge three separate rotate code paths into a single rotate item function.
* Reduce three separate rotate command IDs into a single rotate command ID.
* Move pin rotate code into pin object.
* fix incorrect bounding box size calculation of schematic components.
* fix incorrect bounding box position and size used when schematic components are not found in lib (dummy lib componen used).
Pcbnew:
* Fix issues in block selection for arcs in modedit. Minor code cleaning.
CopyToClipboard: fix incorrect call to PrintPage (bad parameters)
* Merge two duplicate case statement and delete pin code paths into a
single delete function.
* Make all delete commands use new delete function.
* Fix a few set tool ID calls to use default cursor instead of arrow
cursor.
* Make EDA_DRAW_FRAME current tool ID member variable private.
* Added global no tool selected ID to replace application specific no
tool selected IDs.
* Change SetToolID to prevent setting the tool ID to anything less than
the new global no tool selected ID and assert on debug builds.
* Change command and update user interface command event handlers to use
new global no tool selected ID.
* Fixed schematic library editor add pin hot key handler.
* CVPcb now uses wxUpdateUIEvent instead of set toolbars.
* Removed duplicate event handlers in CVPcb that were factored into
EDA_DRAW_FRAME.
* Fix definition of GeneralControle() in CVPcb that prevented it from being
called.
* Remove rarely used and scary refresh code GeneralControle() method in all
main frame windows.
* Factor zoom menu and tool bar command IDs down to EDA_DRAW_FRAME.
* Old control state handling code completely removed in all applications.
* Factor common control state handlers into EDA_DRAW_FRAME.
* Replaced EDA_ITEM test for newness with IsNew() method.
* Factor vertical right toolbar command handlers out of giant edit command
switch statement in EESchema and PCBNew.
1- incorrect mouse cursor position when clicking on an ERC error message from dialog ERC window to go to the corresponding marker.
2- broken behavior of hierarchy navigator (horizontal toolbar, hierarchy tool)
* Rename all member variables and methods that reference the cross hair
code in draw panel object from cursor to cross hair to eliminate confusion
between the two concepts.
* Rename cursor capture call backs in draw panel object to improve code
readability.
* Create helper class for turning off the cross hair while drawing.
* Remove redundant block clear code.
* Remove redundant mouse capture call back reset code when end capture
call back is called.
* Remove unused function definitions in base draw frame object.
* Lots of minor coding policy and doxygen comment fixes.
* Fix optimized bitmap grid drawing method.
* Enable optimized grid drawing method on Windows and Linux.
* Create a helper class for resetting and restoring device context scale
and origin settings for blitting purposes.
* Use wxLogTrace instead of wxLogDebug for coordinate dumping in
drawpanel.cpp. See comments for more information on enabling coordinate
tracing.
* Add flag to allow hiding the drawing cross hair. Hide cross hair by
default on OSX.
* Move get cross hair device position code from draw panel object to base
screen object.
* Remove redundant parent member variable from draw panel object by
overriding wxWindow::GetParent() method.
very minor enhancement in netlist dialog.
Gerbview: remove useless code I wrote specific to Windows in BOARD::Draw() function, because Wayne has fixed the bug.
common_plotPS_functions.cpp: remove a potential bug.
Rename some classes according to coding style policy.
* Fix rendering bug in GerbView caused by wxDC scaling change caused by
setting the wxDC clipping region.
* Eliminate the need to have optional background erasing as the change
above fixed that problem as well.
* Default cursor handling improvements.
Use non translated fields names in intermediate netlist file because they are keyword in this file.
Change intermediate netlist file extension from .tmp to .xml
* Schematic editor cancel current tool command now use a single command
ID that is used everywhere the event is generated.
* Moved cancel current tool code from Process_Special_Functions to a
separate event handler.
* Add idle check method to block select object.
* Add block active check to base screen object.
* Remove base screen methods from draw frame object and correct current
screen methods in derived objects.
* Move restore old wires function code into schematic screen object.
* Make add junction method use current screen position instead of store
position.
* Move poly line ghosting function into the delete current segment method
as that was the only place is was being used.
* Add method to base schematic object of testing if object has a label
that can be incremented.
* Simplified the schematic hierarchy traversing code.
* PCBNew Doxygen warning fixes.
* Changed managed cursor callback definition to include the current
cursor drawing position.
* Modified all managed cursor callbacks to match new definition.
* Added snap to grid option to base drawing frame object.
* Changed add no connect managed cursor callback to use new position
parameter instead of the stored one.
* Lots of coding policy fixes.
* Remove unused member variable m_SizeVisu from base screen object.
* Move nearest grid position code into base screen object.
* Add get cursor position method to base screen object.
* Add position parameter to OnHotKey method in base draw frame and all
derived objects.
* Pass logical position on left mouse button click and double click
events instead of device position.
* Pass logical position to on right mouse button click instead of device
position.
* Use logical event position parameter for locating items in EESchema
instead of the stored position.
* Remove unused position parameter when displaying component edit dialog
in EESchema.
* Comment out debugging macro in eeschema/template_field_names.cpp that was
preventing debug builds using wxWidgets 2.8.x.
* macros.h now has TO_UTF8() and FROM_UTF8() which are working converters
to and from UTF-8 encoding for any wxWidgets build mode. We can switch to
them at any time. I am using them now for specctra conversions and
elsewhere where I wanted gauranteed UTF8 encoding.
* added OUTPUTFORMATTER::Quoted( const wxString& ) to simplify converting
to UTF8 encoded s-expression atoms. The recommended technique is now simply:
out->Quoted( wxString ).c_str()
* Remove all occurrences if #ifdef USE_WX_ZOOM and all associated code within
the #else/#endif block ( old zoom code ).
* Removed the build option for USE_WX_ZOOM from CMakeList.txt and config.h.in.
* Removed all scaling code in base screen object.
* Fixed buffered paint and buffered client DC on Windows. Buffering works
properly on Linux and Windows.
* Modified kicad_device_context.h to automatically uses buffering on platforms
where double buffering is supported natively.
* Remove all of the scaled versions of the drawing functions in gr_basic.cpp
and any support code.
* Removed all traces of ActiveScreen global variable from eeschema and
gerbview.
* Renamed Recadre_Trace to RedrawScreen in draw frame object.
* Renamed PostDirtyRect to RefreshDrawingRect in draw panel object.
* Lots of code cleaning an Doxygen comment improvements.
This was due to a duplicate constants ( with sligtly different values) used to select items in some seach functions that broke filtering. Old definitions removed.
* Use Boost pointer container for sheet hierarchy object.
* Add test for modification in sheet hierarchy list object.
* Add method to clear modification flag in sheet hierarchy list object.
* Improve Doxygen comments for sheet hierarchy list object.
* Remove redundant definitions in prototypes header file.
* Move schematic wire and bus break code into schematic screen object.
* Move schematic test for dangling ends into schematic screen object.
* Remove left over debugging output in schematic screen object.
* Remove unused file eeschema/cleanup.cpp.
* Fix bug in schematic line object hit test algorithm.
* Fix a string concatenation compile error added in r2752.
* Rename class WinEDA_BasicFrame to EDA_BASE_FRAME.
* Rename class WinEDA_DrawFrame to EDA_DRAW_FRAME.
* Rename class WinEDA_DrawPanel to EDA_DRAW_PANEL.
* Encapsulate file name member of base screen object.
* Encapsulate associated screen member of schematic sheet object.
* Create add screen method to schematic sheet object to simplify setting
the associated screen.
* Move the change file name code in the schematic sheet object to the edit
sheet method in the schematic editor frame object to eliminate message
dialogs.
* Improve reference counting in schematic screen object.
* Add helper type definitions for changing schematic object storage to C++
containers.
* TokenList2DsnLexer.cmake now supports comments, which start with a leading
# character, and may be either on their own line or on a line after a token.
* DSNLEXER::PopReader() now pops even the last LINE_READER* and returns it.
++pcbnew:
* SPECCTRA_DB now inherits from new class SPECCTRA_LEXER, which led to a great
deal of simplification and code factoring.
* Moved specctra keywords into specctra.keywords.
Vovanium
Charles McDowell
jean-pierre charras
Wayne Stambaugh
Dick Hollenbeck
Charles McDowell
Andrey Fedorushkov
Marco Mattila