Commit Graph

206 Commits

Author SHA1 Message Date
Jeff Young 01e78b04c6 Save last-used-paths in export dialogs.
Also fixes the export GenCAD dialog so that browse correctly updates
the textbox.

Fixes: lp:1793761
* https://bugs.launchpad.net/kicad/+bug/1793761
2019-08-02 21:03:48 -06:00
Jeff Young 7314acf053 Renaming. 2019-07-26 13:19:17 -06:00
Jeff Young 77334628c4 Change default tool behaviour to skip unhandled events.
The problem is that wxEVT_CHAR_HOOK doesn’t do the key translation
properly.  wxEVT_CHAR does, but we only get to that if we skip the
event at the end of the tool’s event processing loop, which most tools
don’t do.  (Selection tools, point editors, pickers, and a couple of
others do skip, which is probably why this didn’t get reported earlier.)

I played around with a couple of ways to fix wxEVT_CHAR_HOOK.  Most of
them don’t work, and the few egregious hacks I tried weren't cross-
platform.

So I’m changing it so that most tools now skip at the end of their
event loops.  I left out a couple that I felt were high risk (length
tuning, for instance).  But there’s still enough risk that I’m 100%
sure it will break something, I just haven’t a clue what.

Fixes: lp:1836903
* https://bugs.launchpad.net/kicad/+bug/1836903
2019-07-26 12:21:24 -06:00
Jeff Young 815602d1af Fix missing AF_ACTIVATE flags on some tools.
Fixes: lp:1813659
* https://bugs.launchpad.net/kicad/+bug/1813659
2019-07-26 12:21:24 -06:00
Jeff Young 2ca379b281 Copy ratsnest flags when exchanging modules.
Fixes: lp:1834214
* https://bugs.launchpad.net/kicad/+bug/1834214
2019-07-21 19:49:13 -06:00
Jeff Young b858fa38c4 Fix crash bugs in picker tools. 2019-07-21 19:06:06 -06:00
Jeff Young 0b08e4dcd2 Deactivate other tools when running one based on a PICKER.
In particular, if the last one was a PICKER tool, then we're going
to assert on "click-handler-already-set".

Fixes: lp:1836673
* https://bugs.launchpad.net/kicad/+bug/1836673
2019-07-19 15:29:10 -06:00
Jeff Young d67c2d13c7 Fix re-entrancy problem in cross-probing.
Fixes: lp:1836940
* https://bugs.launchpad.net/kicad/+bug/1836940

Fixes: lp:1836937
* https://bugs.launchpad.net/kicad/+bug/1836937
2019-07-17 21:35:28 +01:00
Jeff Young e816a0c29d Push Eeschema & PLEditor PICKER_TOOLs down into common.
Also implements a more robust push/pop tool strategy for pickers.
2019-07-16 00:44:01 +01:00
Jeff Young 58ca5b71a9 A more robust fix for 36f1d023f0.
This one also handles when the events get out-of-order due to them
starting out in the Simulation window and not getting dispatched until
the mouse goes over the Schematic window.

Fixes: lp:1835907
* https://bugs.launchpad.net/kicad/+bug/1835907

Fixes: lp:1836544
* https://bugs.launchpad.net/kicad/+bug/1836544
2019-07-15 14:15:24 +01:00
Jeff Young 560fda70a2 Update position before first mouse-move-event.
Fixes: lp:1780426
* https://bugs.launchpad.net/kicad/+bug/1780426
2019-07-14 10:39:38 +01:00
Jeff Young 37af3adffb Add preference for flip axis.
Fixes: lp:1836267
* https://bugs.launchpad.net/kicad/+bug/1836267
2019-07-14 10:36:48 +01:00
Jeff Young 36f1d023f0 Make sure Push/PopTool() go in the right order.
Because the pickers are called with an Activate()/Wait() pair, any
usurping tool gets in between the picker handling the cancel (due
to activation) and the picker client doing a PopTool().  The new
tool is therefore pushed before the old tool is popped.

Fixes: lp:1835907
* https://bugs.launchpad.net/kicad/+bug/1835907
2019-07-09 15:03:23 +01:00
Jeff Young 3a8f32c380 Convert ShowEEschema to an ACTION so it can get a hotkey assignment.
Fixes: lp:1686010
* https://bugs.launchpad.net/kicad/+bug/1686010
2019-07-09 00:43:41 +01:00
Jeff Young b8013648d2 Change behaviour of increase/decrease track width & via size when there's a selection.
They now modifiy the selection if it contains only tracks and/or vias,
and modify the current widths/sizes otherwise.

Fixes: lp:1814908
* https://bugs.launchpad.net/kicad/+bug/1814908
2019-07-08 22:18:25 +01:00
Jeff Young 772dff7a01 Removed post-page-settings ZoomFitToScreen() calls.
Fixes: lp:1834608
* https://bugs.launchpad.net/kicad/+bug/1834608
2019-07-08 00:06:28 +01:00
Jeff Young a11f3a0b80 Make <esc> unhighlight nets, but only after all tools have been cleared.
Also moves the Highlight Net hotkey from activating the tool to just doing
a one-shot highlight.

Fixes: lp:1835658
* https://bugs.launchpad.net/kicad/+bug/1835658
2019-07-08 00:02:25 +01:00
Jeff Young da71a51029 Cleanup. 2019-07-02 00:48:05 +01:00
Jeff Young 9effd24f3a Allow move tool to run on top of other tools.
Fixes: lp:1784480
* https://bugs.launchpad.net/kicad/+bug/1784480
2019-07-01 22:15:25 +01:00
Jeff Young 981072598b Overhaul cursor code for new tool/action framework.
Includes the addition of an onSetCursor() handler which must be called
from both the GAL canvas AND the GAL backend (at least on OSX) to prevent
cursor flickering between (for instance) pencil and arrow.

Also includes new architecture for point editors which allows them to
coordiate cursors with the editing tools (so we can switch to an arrow
when over a point).
2019-06-27 22:37:11 +01:00
Jeff Young 2f23aa9556 Implement a more robust tool stacking architecture.
We were running into various corner conditions where a tool's event
loop would exit while the tool was still active, or the tool would
get popped while we were still in the event loop.  (A lot of these
had to do with the POINT_EDITOR's, but not all of them.)

The new architecture:
1) tools always do a Push()/Pop()
2) everyone is responsible for their own pops; no more stack-clearing
on a cancel
3) CancelInteractive events go to all tools to facilitate (2)
2019-06-27 17:01:31 +01:00
Jeff Young fa84babefe Re-implement sch->pcb cross-probing using net highlighting architecture.
Fixes: lp:1827853
* https://bugs.launchpad.net/kicad/+bug/1827853
2019-06-26 21:54:03 +01:00
Jeff Young f9702aab87 Immediate actions for PlEditor, PcbNew, etc. 2019-06-25 11:34:28 +01:00
Jeff Young dcbd897a95 Push/pop tools even when selected from the toolbar. 2019-06-18 20:24:15 +01:00
Jeff Young 1f35ec5521 Beware of copying events and losing the m_passEvent flag.
Fixes: lp:1833031
* https://bugs.launchpad.net/kicad/+bug/1833031
2019-06-17 14:44:39 +01:00
Jeff Young e6d5110ccf Implement I18N for ACTIONs.
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro.  We do still want it in the
code, however, because the string harvesting is based off of it.

Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
2019-06-17 10:45:23 +01:00
Jeff Young 19aba615c2 Remove selection condition from conditional menu separators.
We don't allow duplicate separators anyway so all they really do
is complicate the code.
2019-06-15 20:43:51 +01:00
Jeff Young 5610261dce Immediate-action hotkeys (and context menu actions) for eeschema. 2019-06-15 20:43:51 +01:00
Jeff Young 8f84c3ec4f Grid rid of GetCanvas/GetGalCanvas distinction now that there's only gal. 2019-06-13 19:58:37 +01:00
Jeff Young f0cd7a5fd9 Clean up duplicted Find action processing. 2019-06-13 15:51:32 +01:00
Jeff Young df08f9921f Make place drill origin and place grid origin one-shot commands.
Fixes: lp:1751747
* https://bugs.launchpad.net/kicad/+bug/1751747
2019-06-13 15:51:32 +01:00
Seth Hillbrand daad58e511 pcbnew: Add option to show ratsnest while moving
Re-works ratsnest display options in the configuration parameters rather
than the board file.  Moves ratsnest options to central preferences
location.

Fixes: lp:1826440
* https://bugs.launchpad.net/kicad/+bug/1826440

Fixes: lp:1821183
* https://bugs.launchpad.net/kicad/+bug/1821183
2019-06-12 17:36:02 -07:00
Jeff Young 2348537769 Add a command to toggle between last two highlighted nets. 2019-06-12 12:43:12 +01:00
Jeff Young 7726b039b2 Re-jigger standard submenus so they both link AND work. 2019-06-11 18:03:16 +01:00
Jeff Young e9017ce0b1 Update status bar when selected items are modified.
Fixes: lp:1831801
* https://bugs.launchpad.net/kicad/+bug/1831801
2019-06-10 23:46:01 +01:00
Jeff Young bb96255a03 Fix dangerous static_cast-ing to wrong type. 2019-06-10 23:46:01 +01:00
Jeff Young 5e49517781 Move hotkeys to ACTION architecture. 2019-06-10 23:46:00 +01:00
Jeff Young 765606012f Convert separate-compilation of selection.cpp to polymorphism. 2019-06-10 23:46:00 +01:00
Seth Hillbrand 81c5ba257b pcbnew: Ensure cursor remains set during tool activity
Mouse capture end is called by some actions such as save board.  This
resets the cursor image but doesn't change the current tool.  Resetting
the cursor image during action prevents this.

(cherry picked from commit 35e87128f5)

Fixes: lp:1831888
* https://bugs.launchpad.net/kicad/+bug/1831888
2019-06-08 10:25:24 -07:00
Jeff Young 6fab7cc025 Remove a bunch of ugly mutex hacks now that we don't use wxString's UTF8 mode anymore. 2019-06-05 21:23:41 +01:00
Jeff Young 2d40425e4d Move footprint & symbol tree context menus to tool infrastructure.
Fixes: lp:1831692
* https://bugs.launchpad.net/kicad/+bug/1831692
2019-06-05 20:16:48 +01:00
Jeff Young 15241b7fcf ACTION-ize toolbar/palette control. 2019-06-04 22:31:42 +01:00
Jeff Young 1222f3cc72 ACTION-ize fab outputs. 2019-06-04 22:31:42 +01:00
Jeff Young 1bf04d1722 More ACTIONs work. 2019-06-04 00:51:16 +01:00
Jeff Young 3912c7407f Move global commands to ACTIONs.
Also fixes a crash bug opening Edit Tracks and Vias dialog.
2019-06-03 21:08:30 +01:00
Jeff Young 568c8c336b Move DRC control to a tool; move assorted commands to ACTIONS. 2019-06-03 21:08:30 +01:00
Seth Hillbrand 95ab0b1813 pcbnew: Hide dynamic ratsnest after canceling edit
The dynamic ratsnest is shown while moving items but this needs to be
hidden after cancelling.  Previously this was handled by the
SelectionClear event but we've changed this to (correctly) keep the
previous selection when canceling.

Fixes: lp:1831350
* https://bugs.launchpad.net/kicad/+bug/1831350
2019-06-02 20:25:02 -07:00
Ian McInerney cbea5149cb pcbnew: Cleanup context menu ordering 2019-06-02 21:10:56 +01:00
jean-pierre charras 30ad8e9369 Pcbnew, file menu: fix missing initialization of Append Board menuitem 2019-05-31 18:28:31 +02:00
Jeff Young 6936effaa7 Implement undo for Page Settings in PlEditor, Eeschema and PCBNew.
Fixes: lp:1820059
* https://bugs.launchpad.net/kicad/+bug/1820059
2019-05-27 11:58:55 +01:00