Commit Graph

51 Commits

Author SHA1 Message Date
Jeff Young 21d53d0b86 Make sure Use-Netclasses checkbox gets set when loading dialog.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16110
2023-11-18 12:18:45 +00:00
Jeff Young c1f01877a8 Improve length calculation for vias.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10690
2023-10-28 13:14:21 +01:00
Jeff Young 24a9245f81 Hook up via size & drill constraints to editors. 2023-10-21 19:10:38 +01:00
Seth Hillbrand d99641be40 ADDED: Git integration support
Adds support for project-based git integration, branch support, commit,
revert and updates

Fixes https://gitlab.com/kicad/code/kicad/issues/10441
2023-10-20 12:51:47 +00:00
jean-pierre charras 2c10d5e3a0 Pcbnew: fix some issues with very small arcs (size a few internal units)
these very small arcs do not allow to calculate a reliable center position,
and therefore a reliable radius.
So seeing them as a very small segment fix plotting/drawing issues.
Fixes #15639
https://gitlab.com/kicad/code/kicad/-/issues/15639
2023-09-13 17:54:57 +02:00
Seth Hillbrand f3d65b5156 Revise method of selecting footprints in contrast
When working in high contrast mode, we want to be able to select a
footprint with only elements in, e.g. silk and fab layers.

The previous design for footprint IsOnLayer had one behavior of every
other element and a different behavior for footprints.  This leads to
multiple bugs as new features use the overloaded IsOnLayer expecting it
to report if the element exists on a layer or not.

For footprints, we need a different routine to determine whether or not
to select the footprint when clicking on it.  IsOnLayer will report if
the footprint has any elements on a specific layer but we don't want to
use the bbox for a hittest because large footprints with through hole
pads will exist on every layer and have an enormous bbox.  Instead, we
filter footprints based on the hittest of each element.  This behaves in
a more logical fashion, allowing you to select a footprint by clicking
on a visible element of that footprint.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/15284
2023-08-01 10:43:13 -07:00
jean-pierre charras b47f172e57 PCB_VIA::SetLayerSet( LSET aLayerSet ): fix bug: it must consider only copper layers.
Its purpose is to initialize the top and the bottom copper layers connected
by this via. So only copper layers in LSET must be analyzed.
2023-07-12 13:02:05 +02:00
Jeff Young 9a757e8e44 Restore over-aggressive CLion cleanup. 2023-06-06 15:49:41 +01:00
Jeff Young 9fe00bb808 Cleanup. No (intentional) functional changes. 2023-06-06 12:30:35 +01:00
jean-pierre charras 152f6d80e5 Use operator at() instead of [] to access a std::array item
It helps debug.
2023-05-03 16:40:40 +02:00
Wayne Stambaugh a1fb8e1b1d Coverity fixes and code cleaning. 2023-03-06 07:12:18 -05:00
Jon Evans 61d30ee5bc Use constraints to determine netclas width
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14190
2023-03-05 22:35:19 -05:00
Jeff Young 362d85ef50 Special selection mode when in high-contrast with courtyard layer active.
Fixes https://gitlab.com/kicad/code/kicad/issues/13521
2023-02-11 21:11:07 +00:00
Alex b71fa91bc4 Don't write outside of overrides array on pad zone_layer_connections.
Use std::array to catch future errors in Debug.

Fixes https://gitlab.com/kicad/code/kicad/issues/13803
2023-02-08 01:32:52 +03:00
Jeff Young f2f54fe926 Improve zone-layer-connections terminology and comments.
This makes it clearer that the overrides are not inverses of each
other -- one overrides the flashing state and the other overrides
the connection state (to other zones, not to everything).

Also fixes a bug where we were failing to check the force-no-connect
for pads.
2023-02-05 17:39:42 +00:00
Wayne Stambaugh 744fd3a71e Fix GCC build issue on Linux. 2023-01-15 12:18:56 -05:00
Jeff Young 0c8f95aa02 Make sure tesselate_lambda has lock before modifying zone.
Also implements locking for upating pad & tracks' zoneConnectionCaches.

Fixes https://gitlab.com/kicad/code/kicad/issues/13531
2023-01-15 15:52:24 +00:00
Jon Evans c530bdb5a1 Rename GetSelectMenuText to GetItemDescription
This descriptive text is used for many more things than
just the select menu these days.
2023-01-11 22:27:44 -05:00
Jon Evans 2b4cafe9f7 Properties: Fixes for arc tracks 2022-12-22 17:45:16 -05:00
Jeff Young 1aad2fb37b Change via keep-start-end to be start/end, not top/bottom.
The implementation used to always check F_Cu and B_Cu, rather than
where the via started and ended (which will be different for blind/
buried vias and microvias).
2022-11-23 21:37:50 +00:00
Jeff Young b42d5da07d Check keepTopBottom when determining whether or not to flash a pad/via.
Fixes https://gitlab.com/kicad/code/kicad/issues/12961
2022-11-22 18:18:43 +00:00
Jeff Young 11dddefd05 Implement GetEffectiveShape for groups.
Fixes https://gitlab.com/kicad/code/kicad/issues/12940
2022-11-18 21:13:23 +00:00
Jeff Young 03ba14c6d3 Tighten lifecycle management of parent group pointers.
Also adds some debugging to try to catch dangling pointers.

Also adds a cache for group bounding boxes (which will be expensive
to calculate for large groups).

Fixes https://gitlab.com/kicad/code/kicad/issues/12875
2022-11-11 17:27:28 +00:00
Seth Hillbrand c1f2ca1d8d Make multiple names of the net on a track
Rather than moving the netname around, we want to keep the correct
number of netnames on a track such that there is always at least one
displayed on long tracks even when panning.

This reduces calculation time while keeping the netnames visible

Fixes https://gitlab.com/kicad/code/kicad/issues/12436
2022-11-04 11:49:50 -07:00
Seth Hillbrand c95bd3fc89 Cache LOD for netname redraw
When panning, we should only redraw the netnames when they come into
view or go out of view.  Caching the LOD provides this preventing
unneeded redraws while still redrawing on zoom changes

Fixes https://gitlab.com/kicad/code/kicad/issues/12436
2022-11-03 13:50:12 -07:00
Jeff Young d16b23d16e Name shortening and line-break reduction. 2022-10-21 18:41:39 +01:00
Jeff Young 437d2c4589 Overhaul of remove-unconnected's zone filling and drawing strategies.
1) The highest priority zone that a via/pad collides with "owns" its
connectivity state.  Once set, lower priority zones cannot change it --
and in fact, if they would have connected to it are forced not to.

2) The connectivity state goes with the zone fill state, and therefore
must be saved in the file.

3) Display of remove-unconnected's pads is no longer done in GetViewLOD()
(which isn't called for selected items), and is instead done in PCB_PAINTER.
This allows us to draw the full pad in outline mode when a via/pad is
selected which would otherwise only show the hole.

4) Note that in some cases this will still generate DRC errors -- in
particular when a via nearly collides with a higher priority zone it
won't get "owned" by that zone and may therefore have insufficient
clearance if said zone concludes it's unconnected and a subsequent
(lower priority) zone connects to it (causing it to now become flashed).

Fixes https://gitlab.com/kicad/code/kicad/issues/11299
2022-10-18 13:05:42 +01:00
Jeff Young 7e71dc084c Implement Mirror H/V for tracks and vias.
While not that often useful, it's really annoying that it doesn't work
when you *do* find a use-case for it.

Fixes https://gitlab.com/kicad/code/kicad/issues/6853
2022-09-24 19:55:48 +01:00
Jeff Young 64a6fc0fd4 Push UNITS_PROVIDER down into a low-level mixin.
This allows us to also construct cheap UNIT_PROVIDERs for specific
tasks when necessary.
2022-09-19 17:10:59 +01:00
Jeff Young 45d6b4a9fc Readability improvements. 2022-09-19 11:18:20 +01:00
Marek Roszko 3d5913c825 Remove convert_to_biu.h, merge contents to base_units.h 2022-09-16 21:09:28 -04:00
Marek Roszko 66e8931405 Remove IU_PER_MM thats standalone 2022-09-16 21:09:27 -04:00
Jeff Young f17a865593 Move EDA_ITEM hitTest to BOX2I. 2022-08-31 17:18:45 +01:00
Jeff Young 2dc6300501 Move EDA_ITEM bounding boxes to BOX2I. 2022-08-31 10:16:55 +01:00
Jeff Young 4f0136db3b Attempt to fix std::initializer_list lifetime issue. 2022-08-21 20:54:41 +01:00
Jeff Young aa2ad3b44c Move KICAD_T[] to std::initializer_list<KICAD_T>. 2022-08-20 10:28:11 +01:00
Jeff Young 43df863df2 Fix issue with caches not being initialized when printing msg bar. 2022-08-01 13:09:51 +01:00
Marek Roszko a8505d9c76 SEARCH_RESULT -> INSPECT_RESULT
To fix the name squatting it's doing for future functionality
2022-07-29 20:01:10 -04:00
Jeff Young f41af10007 Clean up hole shapes for safety (smart pointer) and consistency. 2022-07-22 23:06:07 +01:00
Jeff Young 2de10080cd Add edge and margin clearances to message panel. 2022-07-15 16:14:32 +01:00
Jeff Young 8a9bf02b7e Smarten up silk clearance & tented item handling.
The inspection tool will report whether or not the item is tented
(indicating in that case that any clearance will only be applied
to any hole).

The DRC test ignores tented items without a hole, and runs the
clearance test against the hole for items with a hole.

Fixes https://gitlab.com/kicad/code/kicad/issues/11954

Fixes https://gitlab.com/kicad/code/kicad/issues/11951
2022-07-08 17:27:05 -06:00
Seth Hillbrand a43fcd045f Hyperlynx arcs are always CW
Previous test comparing start/end angles doesn't account for all cases.
This adds a more robust test to ensure all arcs are output in CW fashion

Fixes https://gitlab.com/kicad/code/kicad/issues/10782
2022-06-22 09:59:37 -07:00
Seth Hillbrand 442aae19d9 Separate flashing check for connectivity
When building the connectivity database, we should not be using the
connectivity to check for shapes.

To make this deterministic, we introduce two flags (ALWAYS_FLASH and
NEVER_FLASH) that are used with connectivity building to determine
whether a pad is flashed for connectivity or not.  ZONE <-> PAD/VIA
connectivity will be checked with ALWAYS_FLASHED and all other
connectivity will be checked with NEVER_FLASHED if they are marked for
potential annular ring removal.  If they are not marked for removal,
they will be checked ALWAYS_FLASHED.

Fixes https://gitlab.com/kicad/code/kicad/issues/11114
2022-03-16 17:30:01 -07:00
Jeff Young 69a6033905 Hysteresis for track netnames.
Fixes https://gitlab.com/kicad/code/kicad/issues/10416
2022-02-28 21:11:01 +00:00
Jeff Young 07013d00e1 More EDA_ANGLE. 2022-01-14 16:08:19 +00:00
Jeff Young c9487bad18 Move BOARD_ITEM::Rotate() to EDA_ANGLE. 2022-01-14 16:08:19 +00:00
Marek Roszko c4c56de708 Neurotically update position wxPoint usages 2022-01-01 11:55:51 -05:00
Jeff Young ed79f6e511 Clean up some TODOs. 2021-12-24 21:10:28 +00:00
Jeff Young ef10b36948 Add mask-to-copper clearance parameter and rename mask margin. 2021-12-24 12:36:41 +00:00
Jeff Young 879254abff Remove track min width from the status bar.
It presents an over-simplified picture.  Better to use Inspect >
Constraints Resolution....

Fixes https://gitlab.com/kicad/code/kicad/issues/9623
2021-11-12 17:31:50 +00:00